← Commit history

Initial commit: component/tps25810rvcr

Ray ·0d198741d7 ·
2 files changed +281
README.mdadded+58
@@ -0,0 +1,58 @@+# TPS25810RVCR++**Texas Instruments** · Interface - Specialized · WQFN-20-EP(3x4)++TPS25810RVCR from Texas Instruments, in a WQFN-20-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FAULT | tri_state | Open-drain logic output that asserts low to indicate current limit or thermal shutdown event due to over temperature. |+| 2 | IN1 | power_in | VBUS input supply (4.5-6.5 V); internal power switch connects IN1 to OUT. |+| 3 | IN1 | power_in | VBUS input supply (4.5-6.5 V); internal power switch connects IN1 to OUT. |+| 4 | IN2 | power_in | VCONN input supply (4.5-5.5 V); internal power switch connects IN2 to CC1 or CC2 based on cable polarity. |+| 5 | AUX | power_in | Auxiliary input supply (2.9-5.5 V); connect to always-alive system rail for Power Wake feature operation. |+| 6 | EN | input | Enable logic input (0-5.5 V) to turn device on and off with rising threshold 1.15 V and falling threshold 0.875 V. |+| 7 | CHG | input | Charge logic input (0-5.5 V) to select between standard USB (500-900 mA) or Type-C current sourcing capability. |+| 8 | CHG_HI | input | High-charge logic input (0-5.5 V) to select between 1.5-A and 3-A Type-C current sourcing capability when CHG is set to Type-C mode. |+| 9 | REF_RTN | passive | Precision signal reference return (internally connected to GND); connect to REF pin via 100-kΩ, 1% tolerance resistor. |+| 10 | REF | input | Analog input (output voltage 0.78-0.82 V typical) used to generate internal current reference; requires 100-kΩ, 1% tolerance resistor to REF_RTN. |+| 11 | CC1 | bidirectional | Analog input/output (0-2.45 V) that connects to USB Type-C receptacle CC1 pin for detecting attachment, cable orientation, and accessory modes. |+| 12 | GND | power_in | Power ground for device supply return and package reference. |+| 13 | CC2 | bidirectional | Analog input/output (0-2.45 V) that connects to USB Type-C receptacle CC2 pin for detecting attachment, cable orientation, and accessory modes. |+| 14 | OUT | power_out | Power switch output (5 A maximum continuous, 3.4 A limit in 3-A mode with 34-55 mΩ on-resistance) providing VBUS to Type-C connector. |+| 15 | OUT | power_out | Power switch output (5 A maximum continuous, 3.4 A limit in 3-A mode with 34-55 mΩ on-resistance) providing VBUS to Type-C connector. |+| 16 | DEBUG | tri_state | Open-drain logic output that asserts low (max 250 mV at 1 mA) when Type-C Debug Accessory (both CC pins at Rd) is detected. |+| 17 | AUDIO | tri_state | Open-drain logic output that asserts low (max 250 mV at 1 mA) when Type-C Audio Adapter Accessory (both CC pins at Ra) is detected. |+| 18 | POL | tri_state | Polarity open-drain output that asserts low (max 250 mV at 1 mA) when CC2 detects Rd, indicating reversed cable orientation and providing super-speed line mux control. |+| 19 | UFP | tri_state | Open-drain logic output that asserts low (max 250 mV at 1 mA) when Type-C Upstream Facing Port (UFP) device is detected on either CC line. |+| 20 | LD_DET | tri_state | Load-detect open-drain output that asserts low (max 350 mV at 1 mA) when 3-A source detects load current exceeding 1.95-A nominal threshold for multi-port power management. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-20-EP(3x4) |+| Category | Interface |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `TPS25810RVCR`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm`+- 3D model: WQFN-20-EP(3x4) (KiCad packages3D, STEP)+- 3D model files: `tps25810rvcr-etched.step` / `tps25810rvcr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps25810rvcr.step` / `tps25810rvcr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps25810) (39 pp, sha256 `f014ab3ddf35a42d`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps25810rvcr-datasheet.pdf)
page.jsonadded+223
@@ -0,0 +1,223 @@+{+  "slug": "tps25810rvcr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Interface - Specialized, WQFN-20-EP(3x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "tps25810rvcr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps25810rvcr.kicad_sym",+    "tps25810rvcr.kicad_mod",+    "tps25810rvcr.glb",+    "tps25810rvcr.step",+    "tps25810rvcr.lbr",+    "docs/hero.png",+    "docs/tps25810rvcr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS25810RVCR",+    "manufacturer": "Texas Instruments",+    "package": "WQFN-20-EP(3x4)",+    "pin_count": 21,+    "category": "Interface",+    "subcategory": "Interface - Specialized",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps25810",+    "parts": {+      "symbol": "tps25810rvcr.kicad_sym",+      "footprint": "tps25810rvcr.kicad_mod",+      "model_3d": "tps25810rvcr-etched.glb",+      "model_3d_plain": "tps25810rvcr.glb",+      "model_3d_step": "tps25810rvcr-etched.step",+      "model_3d_step_plain": "tps25810rvcr.step",+      "lbr": "tps25810rvcr.lbr"+    },+    "distributor_links": {+      "lcsc": "C473913"+    },+    "pins": [+      {+        "number": "1",+        "name": "FAULT",+        "type": "tri_state",+        "description": "Open-drain logic output that asserts low to indicate current limit or thermal shutdown event due to over temperature."+      },+      {+        "number": "2",+        "name": "IN1",+        "type": "power_in",+        "description": "VBUS input supply (4.5-6.5 V); internal power switch connects IN1 to OUT."+      },+      {+        "number": "3",+        "name": "IN1",+        "type": "power_in",+        "description": "VBUS input supply (4.5-6.5 V); internal power switch connects IN1 to OUT."+      },+      {+        "number": "4",+        "name": "IN2",+        "type": "power_in",+        "description": "VCONN input supply (4.5-5.5 V); internal power switch connects IN2 to CC1 or CC2 based on cable polarity."+      },+      {+        "number": "5",+        "name": "AUX",+        "type": "power_in",+        "description": "Auxiliary input supply (2.9-5.5 V); connect to always-alive system rail for Power Wake feature operation."+      },+      {+        "number": "6",+        "name": "EN",+        "type": "input",+        "description": "Enable logic input (0-5.5 V) to turn device on and off with rising threshold 1.15 V and falling threshold 0.875 V."+      },+      {+        "number": "7",+        "name": "CHG",+        "type": "input",+        "description": "Charge logic input (0-5.5 V) to select between standard USB (500-900 mA) or Type-C current sourcing capability."+      },+      {+        "number": "8",+        "name": "CHG_HI",+        "type": "input",+        "description": "High-charge logic input (0-5.5 V) to select between 1.5-A and 3-A Type-C current sourcing capability when CHG is set to Type-C mode."+      },+      {+        "number": "9",+        "name": "REF_RTN",+        "type": "passive",+        "description": "Precision signal reference return (internally connected to GND); connect to REF pin via 100-kΩ, 1% tolerance resistor."+      },+      {+        "number": "10",+        "name": "REF",+        "type": "input",+        "description": "Analog input (output voltage 0.78-0.82 V typical) used to generate internal current reference; requires 100-kΩ, 1% tolerance resistor to REF_RTN."+      },+      {+        "number": "11",+        "name": "CC1",+        "type": "bidirectional",+        "description": "Analog input/output (0-2.45 V) that connects to USB Type-C receptacle CC1 pin for detecting attachment, cable orientation, and accessory modes."+      },+      {+        "number": "12",+        "name": "GND",+        "type": "power_in",+        "description": "Power ground for device supply return and package reference."+      },+      {+        "number": "13",+        "name": "CC2",+        "type": "bidirectional",+        "description": "Analog input/output (0-2.45 V) that connects to USB Type-C receptacle CC2 pin for detecting attachment, cable orientation, and accessory modes."+      },+      {+        "number": "14",+        "name": "OUT",+        "type": "power_out",+        "description": "Power switch output (5 A maximum continuous, 3.4 A limit in 3-A mode with 34-55 mΩ on-resistance) providing VBUS to Type-C connector."+      },+      {+        "number": "15",+        "name": "OUT",+        "type": "power_out",+        "description": "Power switch output (5 A maximum continuous, 3.4 A limit in 3-A mode with 34-55 mΩ on-resistance) providing VBUS to Type-C connector."+      },+      {+        "number": "16",+        "name": "DEBUG",+        "type": "tri_state",+        "description": "Open-drain logic output that asserts low (max 250 mV at 1 mA) when Type-C Debug Accessory (both CC pins at Rd) is detected."+      },+      {+        "number": "17",+        "name": "AUDIO",+        "type": "tri_state",+        "description": "Open-drain logic output that asserts low (max 250 mV at 1 mA) when Type-C Audio Adapter Accessory (both CC pins at Ra) is detected."+      },+      {+        "number": "18",+        "name": "POL",+        "type": "tri_state",+        "description": "Polarity open-drain output that asserts low (max 250 mV at 1 mA) when CC2 detects Rd, indicating reversed cable orientation and providing super-speed line mux control."+      },+      {+        "number": "19",+        "name": "UFP",+        "type": "tri_state",+        "description": "Open-drain logic output that asserts low (max 250 mV at 1 mA) when Type-C Upstream Facing Port (UFP) device is detected on either CC line."+      },+      {+        "number": "20",+        "name": "LD_DET",+        "type": "tri_state",+        "description": "Load-detect open-drain output that asserts low (max 350 mV at 1 mA) when 3-A source detects load current exceeding 1.95-A nominal threshold for multi-port power management."+      },+      {+        "number": "21",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pins 2 and 3 both carry IN1 signal; dual pins used for high-current VBUS supply distribution to mini; Pins 14 and 15 both carry OUT signal; dual pins used for high-current power switch output distributi; Thermal pad numbering: datasheet does not explicitly assign a numeric pin number to the thermal pad;",+          "exposed pad 21 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 39,+        "cost_usd": 0.5019,+        "at": "2026-09-17T21:52:14"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps25810",+        "pages": 39,+        "sha256": "f014ab3ddf35a42d",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 21,+        "described": 21,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file