component
TPS2553DBVR
Public Made by Adomby adom
Texas Instruments AC-DC Controllers and Regulators, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
tps2553dbvr: backfill missing artifacts (etch, variants)
3 files changed
+22237−6
diff truncated
README.md+2@@ -26,6 +26,8 @@ TPS2553DBVR from Texas Instruments, in a SOT-23-6. Pinout and pin descriptions e ## Ordering variants +Same part, different packaging or reel option.+ - `TPS2553DBVR` - `TPS2553DBVRDBVT` - `TPS2553DBVRDRVR`
page.json+25−6@@ -35,7 +35,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input supply voltage (2.5 V to 6.5 V). Connect a 0.1 \u00b5F or greater ceramic bypass capacitor from IN to GND as close to the IC as possible."+ "description": "Input supply voltage (2.5 V to 6.5 V). Connect a 0.1 µF or greater ceramic bypass capacitor from IN to GND as close to the IC as possible." }, { "number": "2",@@ -47,19 +47,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable input; logic HIGH turns on the power switch (TPS2553 is active-high; the TPS2552 variant uses active-low EN\u0304 on the same pin)."+ "description": "Enable input; logic HIGH turns on the power switch (TPS2553 is active-high; the TPS2552 variant uses active-low EN̄ on the same pin)." }, { "number": "4", "name": "FAULT", "type": "output",- "description": "Active-low open-drain fault output; asserted during overcurrent, overtemperature, or reverse-voltage conditions. Requires an external pull-up (e.g., 100 k\u03a9). Continuous sink current rated up to 25 mA."+ "description": "Active-low open-drain fault output; asserted during overcurrent, overtemperature, or reverse-voltage conditions. Requires an external pull-up (e.g., 100 kΩ). Continuous sink current rated up to 25 mA." }, { "number": "5", "name": "ILIM", "type": "output",- "description": "Current-limit programming pin. External resistor to GND sets current-limit threshold; recommended 15 k\u03a9 \u2264 R_ILIM \u2264 232 k\u03a9. ILIM source current is limited to 1 mA absolute maximum."+ "description": "Current-limit programming pin. External resistor to GND sets current-limit threshold; recommended 15 kΩ ≤ R_ILIM ≤ 232 kΩ. ILIM source current is limited to 1 mA absolute maximum." }, { "number": "6",@@ -139,9 +139,28 @@ "docs/hero.png", "docs/tps2553dbvr-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "tps2553dbvr-etched.step" ], "visibility": { "public": true- }+ },+ "variants": [+ {+ "mpn": "TPS2553DBVR",+ "kind": "packaging"+ },+ {+ "mpn": "TPS2553DBVRDBVT",+ "kind": "packaging"+ },+ {+ "mpn": "TPS2553DBVRDRVR",+ "kind": "packaging"+ },+ {+ "mpn": "TPS2553DBVRDRVT",+ "kind": "packaging"+ }+ ] }
tps2553dbvr-etched.stepadded+22210@@ -0,0 +1,53081 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-09-04T01:11:29',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('part','part','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#19),#23);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18);+#16 = CARTESIAN_POINT('',(0.,0.,0.));+#17 = DIRECTION('',(0.,0.,1.));+#18 = DIRECTION('',(1.,0.,-0.));+#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22);+#20 = CARTESIAN_POINT('',(0.,0.,0.));+#21 = DIRECTION('',(0.,0.,1.));+#22 = DIRECTION('',(1.,0.,-0.));+#23 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#27)) GLOBAL_UNIT_ASSIGNED_CONTEXT(+(#24,#25,#26)) REPRESENTATION_CONTEXT('Context #1',+ '3D Context with UNIT and UNCERTAINTY') );+#24 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#25 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#26 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#27 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-06),#24,+ 'distance_accuracy_value','confusion accuracy');+#28 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#29 = SHAPE_DEFINITION_REPRESENTATION(#30,#36);+#30 = PRODUCT_DEFINITION_SHAPE('','',#31);+#31 = PRODUCT_DEFINITION('design','',#32,#35);+#32 = PRODUCT_DEFINITION_FORMATION('','',#33);+#33 = PRODUCT('body','body','',(#34));+#34 = PRODUCT_CONTEXT('',#2,'mechanical');+#35 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#36 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#37),#24223);+#37 = MANIFOLD_SOLID_BREP('',#38);+#38 = CLOSED_SHELL('',(#39,#156,#235,#482,#561,#640,#719,#961,#1044,+ #2070,#2143,#7896,#7972,#8112,#8139,#8166,#8193,#8220,#8247,#8254,+ #8330,#8974,#9056,#9208,#9235,#9262,#9289,#9316,#9343,#9350,#9432,+ #9584,#9611,#9638,#9665,#9692,#9719,#9726,#9753,#9780,#9807,#9834,+ #9861,#9888,#9915,#9942,#9969,#9976,#10052,#10398,#10472,#10632,+ #10659,#10686,#10713,#10740,#10767,#10774,#10801,#10828,#10855,+ #10882,#10909,#10916,#10992,#11638,#11665,#11692,#11719,#11746,+ #11773,#11800,#11827,#11854,#11881,#11908,#11935,#11962,#11989,+ #12016,#12043,#12070,#12097,#12124,#12151,#12178,#12205,#12232,+ #12259,#12286,#12313,#12340,#12367,#12374,#12450,#12935,#12962,+ #12989,#13016,#13043,#13070,#13097,#13124,#13151,#13178,#13205,+ #13232,#13259,#13286,#13313,#13340,#13367,#13394,#13421,#13448,+ #13475,#13482,#13558,#14043,#14070,#14097,#14124,#14151,#14178,+ #14205,#14232,#14259,#14286,#14313,#14340,#14367,#14394,#14421,+ #14448,#14475,#14502,#14529,#14556,#14583,#14590,#14666,#15128,+ #15155,#15182,#15209,#15236,#15263,#15290,#15317,#15344,#15371,+ #15398,#15425,#15452,#15479,#15506,#15533,#15560,#15587,#15614,+ #15641,#15648,#15724,#16347,#16374,#16401,#16428,#16455,#16482,+ #16509,#16536,#16563,#16590,#16617,#16644,#16671,#16698,#16725,+ #16752,#16779,#16806,#16833,#16860,#16887,#16914,#16941,#16968,+ #16995,#17022,#17049,#17056,#17132,#17524,#17606,#17767,#17794,+ #17821,#17848,#17875,#17902,#17909,#17936,#17963,#17990,#18017,+ #18044,#18071,#18098,#18105,#18178,#18396,#18467,#18533,#18560,+ #18584,#18611,#18638,#18665,#18689,#18762,#18830,#18857,#18881,+ #18907,#18933,#18963,#18989,#19015,#19041,#19056,#19361,#19432,+ #19486,#19535,#19584,#19633,#19683,#19732,#19786,#19814,#19869,+ #20174,#20245,#20299,#20348,#20397,#20446,#20496,#20545,#20599,+ #20627,#20682,#20987,#21058,#21112,#21161,#21210,#21259,#21309,+ #21358,#21412,#21440,#21495,#21800,#21871,#21925,#21974,#22023,+ #22072,#22122,#22171,#22225,#22253,#22308,#22613,#22684,#22738,+ #22787,#22836,#22885,#22935,#22984,#23038,#23066,#23121,#23426,+ #23497,#23551,#23600,#23649,#23698,#23748,#23797,#23851,#23879,+ #23914,#23958,#23965,#23972,#23979,#23986,#23993,#24017,#24041,+ #24065,#24089,#24096,#24103,#24110,#24117,#24124,#24131,#24155,+ #24179,#24186,#24212));+#39 = ADVANCED_FACE('',(#40),#54,.F.);+#40 = FACE_BOUND('',#41,.F.);+#41 = EDGE_LOOP('',(#42,#76,#103,#131));+#42 = ORIENTED_EDGE('',*,*,#43,.T.);+#43 = EDGE_CURVE('',#44,#46,#48,.T.);+#44 = VERTEX_POINT('',#45);+#45 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#46 = VERTEX_POINT('',#47);+#47 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#48 = SURFACE_CURVE('',#49,(#53,#64),.PCURVE_S1.);+#49 = LINE('',#50,#51);+#50 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#51 = VECTOR('',#52,1.);+#52 = DIRECTION('',(1.,1.110223024625E-16,0.));+#53 = PCURVE('',#54,#59);+#54 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#55,#56)+ ,(#57,#58)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#55 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#56 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#57 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#58 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#59 = DEFINITIONAL_REPRESENTATION('',(#60),#63);+#60 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#61,#62),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.318648457444),.PIECEWISE_BEZIER_KNOTS.);+#61 = CARTESIAN_POINT('',(2.332094702799E-18,-4.688882608039E-17));+#62 = CARTESIAN_POINT('',(1.41,-3.650222601257E-17));+#63 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#64 = PCURVE('',#65,#70);+#65 = PLANE('',#66);+#66 = AXIS2_PLACEMENT_3D('',#67,#68,#69);+#67 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#68 = DIRECTION('',(0.,0.,1.));+#69 = DIRECTION('',(0.436587433964,-0.899661832304,0.));+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);+#71 = LINE('',#72,#73);+#72 = CARTESIAN_POINT('',(0.,0.));+#73 = VECTOR('',#74,1.);+#74 = DIRECTION('',(0.436587433964,0.899661832304));+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#76 = ORIENTED_EDGE('',*,*,#77,.T.);+#77 = EDGE_CURVE('',#46,#78,#80,.T.);+#78 = VERTEX_POINT('',#79);+#79 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#80 = SURFACE_CURVE('',#81,(#84,#91),.PCURVE_S1.);+#81 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#82,#83),.UNSPECIFIED.,.F.,.F.,(2,+ 2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#82 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#83 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#84 = PCURVE('',#54,#85);+#85 = DEFINITIONAL_REPRESENTATION('',(#86),#90);+#86 = LINE('',#87,#88);+#87 = CARTESIAN_POINT('',(1.41,-7.837603163075E-17));+#88 = VECTOR('',#89,1.);+#89 = DIRECTION('',(0.,1.));+#90 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#91 = PCURVE('',#92,#97);+#92 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#93,#94)+ ,(#95,#96+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#93 = CARTESIAN_POINT('',(0.659324228722,1.358648457443,0.1));+#94 = CARTESIAN_POINT('',(0.705,1.45,0.75));+#95 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#96 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#97 = DEFINITIONAL_REPRESENTATION('',(#98),#102);+#98 = LINE('',#99,#100);+#99 = CARTESIAN_POINT('',(1.711827418542E-16,-4.966511580277E-17));+#100 = VECTOR('',#101,1.);+#101 = DIRECTION('',(-2.801248917812E-16,1.));+#102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#103 = ORIENTED_EDGE('',*,*,#104,.F.);+#104 = EDGE_CURVE('',#105,#78,#107,.T.);+#105 = VERTEX_POINT('',#106);+#106 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#107 = SURFACE_CURVE('',#108,(#112,#119),.PCURVE_S1.);+#108 = LINE('',#109,#110);+#109 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#110 = VECTOR('',#111,1.);+#111 = DIRECTION('',(1.,1.110223024625E-16,0.));+#112 = PCURVE('',#54,#113);+#113 = DEFINITIONAL_REPRESENTATION('',(#114),#118);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(1.664985591449E-16,1.));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(1.,7.873922160462E-17));+#118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#119 = PCURVE('',#120,#125);+#120 = PLANE('',#121);+#121 = AXIS2_PLACEMENT_3D('',#122,#123,#124);+#122 = CARTESIAN_POINT('',(-0.705,1.45,0.9));+#123 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#124 = DIRECTION('',(1.,1.110223024625E-16,0.));+#125 = DEFINITIONAL_REPRESENTATION('',(#126),#130);+#126 = LINE('',#127,#128);+#127 = CARTESIAN_POINT('',(0.,-0.15));+#128 = VECTOR('',#129,1.);+#129 = DIRECTION('',(1.,0.));+#130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#131 = ORIENTED_EDGE('',*,*,#132,.F.);+#132 = EDGE_CURVE('',#44,#105,#133,.T.);+#133 = SURFACE_CURVE('',#134,(#137,#144),.PCURVE_S1.);+#134 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#136),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#135 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#136 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#137 = PCURVE('',#54,#138);+#138 = DEFINITIONAL_REPRESENTATION('',(#139),#143);+#139 = LINE('',#140,#141);+#140 = CARTESIAN_POINT('',(2.332094702799E-18,-4.688882608039E-17));+#141 = VECTOR('',#142,1.);+#142 = DIRECTION('',(1.663168722973E-16,1.));+#143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#144 = PCURVE('',#145,#150);+#145 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#146,#147)+ ,(#148,#149+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#146 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#147 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#148 = CARTESIAN_POINT('',(-0.659324228722,1.358648457443,0.1));+#149 = CARTESIAN_POINT('',(-0.705,1.45,0.75));+#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);+#151 = LINE('',#152,#153);+#152 = CARTESIAN_POINT('',(0.134350288425,-6.07217739169E-17));+#153 = VECTOR('',#154,1.);+#154 = DIRECTION('',(3.330669073875E-16,1.));+#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#156 = ADVANCED_FACE('',(#157),#145,.F.);+#157 = FACE_BOUND('',#158,.F.);+#158 = EDGE_LOOP('',(#159,#181,#182,#210));+#159 = ORIENTED_EDGE('',*,*,#160,.T.);+#160 = EDGE_CURVE('',#161,#44,#163,.T.);+#161 = VERTEX_POINT('',#162);+#162 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#163 = SURFACE_CURVE('',#164,(#168,#174),.PCURVE_S1.);+#164 = LINE('',#165,#166);+#165 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#166 = VECTOR('',#167,1.);+#167 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#168 = PCURVE('',#145,#169);+#169 = DEFINITIONAL_REPRESENTATION('',(#170),#173);+#170 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#171,#172),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,6.975499321083E-02),.PIECEWISE_BEZIER_KNOTS.);+#171 = CARTESIAN_POINT('',(-2.835096264296E-16,-6.725629535342E-17));+#172 = CARTESIAN_POINT('',(0.134350288425,-8.488214501621E-17));+#173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#174 = PCURVE('',#65,#175);+#175 = DEFINITIONAL_REPRESENTATION('',(#176),#180);+#176 = LINE('',#177,#178);+#177 = CARTESIAN_POINT('',(2.284078753856E-02,-6.590946443768E-02));+#178 = VECTOR('',#179,1.);+#179 = DIRECTION('',(-0.32744304726,0.944870917534));+#180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#181 = ORIENTED_EDGE('',*,*,#132,.T.);+#182 = ORIENTED_EDGE('',*,*,#183,.F.);+#183 = EDGE_CURVE('',#184,#105,#186,.T.);+#184 = VERTEX_POINT('',#185);+#185 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#186 = SURFACE_CURVE('',#187,(#191,#198),.PCURVE_S1.);+#187 = LINE('',#188,#189);+#188 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#189 = VECTOR('',#190,1.);+#190 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#191 = PCURVE('',#145,#192);+#192 = DEFINITIONAL_REPRESENTATION('',(#193),#197);+#193 = LINE('',#194,#195);+#194 = CARTESIAN_POINT('',(-2.980584140513E-17,1.));+#195 = VECTOR('',#196,1.);+#196 = DIRECTION('',(1.,0.));+#197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#198 = PCURVE('',#199,#204);+#199 = PLANE('',#200);+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);+#201 = CARTESIAN_POINT('',(-0.8,1.355,0.9));+#202 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#203 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#204 = DEFINITIONAL_REPRESENTATION('',(#205),#209);+#205 = LINE('',#206,#207);+#206 = CARTESIAN_POINT('',(0.,-0.15));+#207 = VECTOR('',#208,1.);+#208 = DIRECTION('',(1.,0.));+#209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#210 = ORIENTED_EDGE('',*,*,#211,.F.);+#211 = EDGE_CURVE('',#161,#184,#212,.T.);+#212 = SURFACE_CURVE('',#213,(#216,#223),.PCURVE_S1.);+#213 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#214,#215),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#214 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#215 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#216 = PCURVE('',#145,#217);+#217 = DEFINITIONAL_REPRESENTATION('',(#218),#222);+#218 = LINE('',#219,#220);+#219 = CARTESIAN_POINT('',(-2.835096264296E-16,-6.725629535342E-17));+#220 = VECTOR('',#221,1.);+#221 = DIRECTION('',(4.118507024083E-16,1.));+#222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#223 = PCURVE('',#224,#229);+#224 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#225,#226)+ ,(#227,#228+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#225 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#226 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#227 = CARTESIAN_POINT('',(-0.708648457443,1.309324228722,0.1));+#228 = CARTESIAN_POINT('',(-0.8,1.355,0.75));+#229 = DEFINITIONAL_REPRESENTATION('',(#230),#234);+#230 = LINE('',#231,#232);+#231 = CARTESIAN_POINT('',(2.71,-4.77063817192E-18));+#232 = VECTOR('',#233,1.);+#233 = DIRECTION('',(-4.440892098501E-16,1.));+#234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#235 = ADVANCED_FACE('',(#236),#224,.F.);+#236 = FACE_BOUND('',#237,.F.);+#237 = EDGE_LOOP('',(#238,#260,#261,#289,#317,#345,#373,#401,#429,#457)+ );+#238 = ORIENTED_EDGE('',*,*,#239,.T.);+#239 = EDGE_CURVE('',#240,#161,#242,.T.);+#240 = VERTEX_POINT('',#241);+#241 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#242 = SURFACE_CURVE('',#243,(#247,#253),.PCURVE_S1.);+#243 = LINE('',#244,#245);+#244 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#245 = VECTOR('',#246,1.);+#246 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#247 = PCURVE('',#224,#248);+#248 = DEFINITIONAL_REPRESENTATION('',(#249),#252);+#249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#250,#251),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,2.618648457444),.PIECEWISE_BEZIER_KNOTS.);+#250 = CARTESIAN_POINT('',(-2.840258528946E-16,-6.237342063396E-17));+#251 = CARTESIAN_POINT('',(2.71,1.356324907117E-17));+#252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#253 = PCURVE('',#65,#254);+#254 = DEFINITIONAL_REPRESENTATION('',(#255),#259);+#255 = LINE('',#256,#257);+#256 = CARTESIAN_POINT('',(2.378738856923,-1.209178474927));+#257 = VECTOR('',#258,1.);+#258 = DIRECTION('',(-0.899661832304,0.436587433964));+#259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#260 = ORIENTED_EDGE('',*,*,#211,.T.);+#261 = ORIENTED_EDGE('',*,*,#262,.F.);+#262 = EDGE_CURVE('',#263,#184,#265,.T.);+#263 = VERTEX_POINT('',#264);+#264 = CARTESIAN_POINT('',(-0.8,1.2,0.75));+#265 = SURFACE_CURVE('',#266,(#270,#277),.PCURVE_S1.);+#266 = LINE('',#267,#268);+#267 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#268 = VECTOR('',#269,1.);+#269 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#270 = PCURVE('',#224,#271);+#271 = DEFINITIONAL_REPRESENTATION('',(#272),#276);+#272 = LINE('',#273,#274);+#273 = CARTESIAN_POINT('',(0.,1.));+#274 = VECTOR('',#275,1.);+#275 = DIRECTION('',(1.,0.));+#276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#277 = PCURVE('',#278,#283);+#278 = PLANE('',#279);+#279 = AXIS2_PLACEMENT_3D('',#280,#281,#282);+#280 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#281 = DIRECTION('',(1.,1.110223024625E-16,0.));+#282 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#283 = DEFINITIONAL_REPRESENTATION('',(#284),#288);+#284 = LINE('',#285,#286);+#285 = CARTESIAN_POINT('',(0.,-0.15));+#286 = VECTOR('',#287,1.);+#287 = DIRECTION('',(1.,0.));+#288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#289 = ORIENTED_EDGE('',*,*,#290,.F.);+#290 = EDGE_CURVE('',#291,#263,#293,.T.);+#291 = VERTEX_POINT('',#292);+#292 = CARTESIAN_POINT('',(-0.8,0.7,0.75));+#293 = SURFACE_CURVE('',#294,(#298,#305),.PCURVE_S1.);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#298 = PCURVE('',#224,#299);+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#304);+#300 = LINE('',#301,#302);+#301 = CARTESIAN_POINT('',(0.,1.));+#302 = VECTOR('',#303,1.);+#303 = DIRECTION('',(1.,0.));+#304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#305 = PCURVE('',#306,#311);+#306 = PLANE('',#307);+#307 = AXIS2_PLACEMENT_3D('',#308,#309,#310);+#308 = CARTESIAN_POINT('',(-0.75,0.7,0.75));+#309 = DIRECTION('',(0.,0.,1.));+#310 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#311 = DEFINITIONAL_REPRESENTATION('',(#312),#316);+#312 = LINE('',#313,#314);+#313 = CARTESIAN_POINT('',(5.E-02,2.055));+#314 = VECTOR('',#315,1.);+#315 = DIRECTION('',(1.224646799147E-16,-1.));+#316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#317 = ORIENTED_EDGE('',*,*,#318,.F.);+#318 = EDGE_CURVE('',#319,#291,#321,.T.);+#319 = VERTEX_POINT('',#320);+#320 = CARTESIAN_POINT('',(-0.8,0.25,0.75));+#321 = SURFACE_CURVE('',#322,(#326,#333),.PCURVE_S1.);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#326 = PCURVE('',#224,#327);+#327 = DEFINITIONAL_REPRESENTATION('',(#328),#332);+#328 = LINE('',#329,#330);+#329 = CARTESIAN_POINT('',(0.,1.));+#330 = VECTOR('',#331,1.);+#331 = DIRECTION('',(1.,0.));+#332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#333 = PCURVE('',#334,#339);+#334 = PLANE('',#335);+#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338);+#336 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#337 = DIRECTION('',(1.,1.110223024625E-16,0.));+#338 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#339 = DEFINITIONAL_REPRESENTATION('',(#340),#344);+#340 = LINE('',#341,#342);+#341 = CARTESIAN_POINT('',(0.,-0.15));+#342 = VECTOR('',#343,1.);+#343 = DIRECTION('',(1.,0.));+#344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#345 = ORIENTED_EDGE('',*,*,#346,.F.);+#346 = EDGE_CURVE('',#347,#319,#349,.T.);+#347 = VERTEX_POINT('',#348);+#348 = CARTESIAN_POINT('',(-0.8,-0.25,0.75));+#349 = SURFACE_CURVE('',#350,(#354,#361),.PCURVE_S1.);+#350 = LINE('',#351,#352);+#351 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#352 = VECTOR('',#353,1.);+#353 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#354 = PCURVE('',#224,#355);+#355 = DEFINITIONAL_REPRESENTATION('',(#356),#360);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(0.,1.));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(1.,2.22044604925E-16));+#360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#361 = PCURVE('',#362,#367);+#362 = PLANE('',#363);+#363 = AXIS2_PLACEMENT_3D('',#364,#365,#366);+#364 = CARTESIAN_POINT('',(-0.75,-0.25,0.75));+#365 = DIRECTION('',(0.,0.,1.));+#366 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#367 = DEFINITIONAL_REPRESENTATION('',(#368),#372);+#368 = LINE('',#369,#370);+#369 = CARTESIAN_POINT('',(5.E-02,1.105));+#370 = VECTOR('',#371,1.);+#371 = DIRECTION('',(1.224646799147E-16,-1.));+#372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#373 = ORIENTED_EDGE('',*,*,#374,.F.);+#374 = EDGE_CURVE('',#375,#347,#377,.T.);+#375 = VERTEX_POINT('',#376);+#376 = CARTESIAN_POINT('',(-0.8,-0.7,0.75));+#377 = SURFACE_CURVE('',#378,(#382,#389),.PCURVE_S1.);+#378 = LINE('',#379,#380);+#379 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#380 = VECTOR('',#381,1.);+#381 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#382 = PCURVE('',#224,#383);+#383 = DEFINITIONAL_REPRESENTATION('',(#384),#388);+#384 = LINE('',#385,#386);+#385 = CARTESIAN_POINT('',(0.,1.));+#386 = VECTOR('',#387,1.);+#387 = DIRECTION('',(1.,0.));+#388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#389 = PCURVE('',#390,#395);+#390 = PLANE('',#391);+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);+#392 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#393 = DIRECTION('',(1.,1.110223024625E-16,0.));+#394 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#395 = DEFINITIONAL_REPRESENTATION('',(#396),#400);+#396 = LINE('',#397,#398);+#397 = CARTESIAN_POINT('',(0.,-0.15));+#398 = VECTOR('',#399,1.);+#399 = DIRECTION('',(1.,0.));+#400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#401 = ORIENTED_EDGE('',*,*,#402,.F.);+#402 = EDGE_CURVE('',#403,#375,#405,.T.);+#403 = VERTEX_POINT('',#404);+#404 = CARTESIAN_POINT('',(-0.8,-1.2,0.75));+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#410 = PCURVE('',#224,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(2.775557561563E-17,1.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(1.,0.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(-0.75,-1.2,0.75));+#421 = DIRECTION('',(0.,0.,1.));+#422 = DIRECTION('',(-1.,1.144237745222E-17,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(5.E-02,0.155));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.224646799147E-16,-1.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ORIENTED_EDGE('',*,*,#430,.F.);+#430 = EDGE_CURVE('',#431,#403,#433,.T.);+#431 = VERTEX_POINT('',#432);+#432 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#433 = SURFACE_CURVE('',#434,(#438,#445),.PCURVE_S1.);+#434 = LINE('',#435,#436);+#435 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#436 = VECTOR('',#437,1.);+#437 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#438 = PCURVE('',#224,#439);+#439 = DEFINITIONAL_REPRESENTATION('',(#440),#444);+#440 = LINE('',#441,#442);+#441 = CARTESIAN_POINT('',(9.931166044437E-17,1.));+#442 = VECTOR('',#443,1.);+#443 = DIRECTION('',(1.,-7.16272919113E-16));+#444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#445 = PCURVE('',#446,#451);+#446 = PLANE('',#447);+#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450);+#448 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#449 = DIRECTION('',(1.,1.110223024625E-16,0.));+#450 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.,-0.15));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(1.,0.));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#240,#431,#459,.T.);+#459 = SURFACE_CURVE('',#460,(#463,#470),.PCURVE_S1.);+#460 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#461,#462),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#461 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#462 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#463 = PCURVE('',#224,#464);+#464 = DEFINITIONAL_REPRESENTATION('',(#465),#469);+#465 = LINE('',#466,#467);+#466 = CARTESIAN_POINT('',(-2.840258528946E-16,-6.237342063396E-17));+#467 = VECTOR('',#468,1.);+#468 = DIRECTION('',(3.83337513339E-16,1.));+#469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#470 = PCURVE('',#471,#476);+#471 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#472,#473)+ ,(#474,#475+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#472 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#473 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#474 = CARTESIAN_POINT('',(-0.708648457443,-1.309324228722,0.1));+#475 = CARTESIAN_POINT('',(-0.8,-1.355,0.75));+#476 = DEFINITIONAL_REPRESENTATION('',(#477),#481);+#477 = LINE('',#478,#479);+#478 = CARTESIAN_POINT('',(0.134350288425,-5.619963771465E-17));+#479 = VECTOR('',#480,1.);+#480 = DIRECTION('',(-2.498001805407E-16,1.));+#481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#482 = ADVANCED_FACE('',(#483),#471,.F.);+#483 = FACE_BOUND('',#484,.F.);+#484 = EDGE_LOOP('',(#485,#507,#508,#536));+#485 = ORIENTED_EDGE('',*,*,#486,.T.);+#486 = EDGE_CURVE('',#487,#240,#489,.T.);+#487 = VERTEX_POINT('',#488);+#488 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#489 = SURFACE_CURVE('',#490,(#494,#500),.PCURVE_S1.);+#490 = LINE('',#491,#492);+#491 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#492 = VECTOR('',#493,1.);+#493 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#494 = PCURVE('',#471,#495);+#495 = DEFINITIONAL_REPRESENTATION('',(#496),#499);+#496 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#497,#498),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,6.975499321083E-02),.PIECEWISE_BEZIER_KNOTS.);+#497 = CARTESIAN_POINT('',(1.711827418542E-16,-4.966511580277E-17));+#498 = CARTESIAN_POINT('',(0.134350288425,-1.442696974105E-17));+#499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#500 = PCURVE('',#65,#501);+#501 = DEFINITIONAL_REPRESENTATION('',(#502),#506);+#502 = LINE('',#503,#504);+#503 = CARTESIAN_POINT('',(2.444648321361,-1.186337687388));+#504 = VECTOR('',#505,1.);+#505 = DIRECTION('',(-0.944870917534,-0.32744304726));+#506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#507 = ORIENTED_EDGE('',*,*,#458,.T.);+#508 = ORIENTED_EDGE('',*,*,#509,.F.);+#509 = EDGE_CURVE('',#510,#431,#512,.T.);+#510 = VERTEX_POINT('',#511);+#511 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#512 = SURFACE_CURVE('',#513,(#517,#524),.PCURVE_S1.);+#513 = LINE('',#514,#515);+#514 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#515 = VECTOR('',#516,1.);+#516 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#517 = PCURVE('',#471,#518);+#518 = DEFINITIONAL_REPRESENTATION('',(#519),#523);+#519 = LINE('',#520,#521);+#520 = CARTESIAN_POINT('',(-1.880156086189E-16,1.));+#521 = VECTOR('',#522,1.);+#522 = DIRECTION('',(1.,0.));+#523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#524 = PCURVE('',#525,#530);+#525 = PLANE('',#526);+#526 = AXIS2_PLACEMENT_3D('',#527,#528,#529);+#527 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));+#528 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#529 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#530 = DEFINITIONAL_REPRESENTATION('',(#531),#535);+#531 = LINE('',#532,#533);+#532 = CARTESIAN_POINT('',(0.,-0.15));+#533 = VECTOR('',#534,1.);+#534 = DIRECTION('',(1.,0.));+#535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#536 = ORIENTED_EDGE('',*,*,#537,.F.);+#537 = EDGE_CURVE('',#487,#510,#538,.T.);+#538 = SURFACE_CURVE('',#539,(#542,#549),.PCURVE_S1.);+#539 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#540,#541),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#540 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#541 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#542 = PCURVE('',#471,#543);+#543 = DEFINITIONAL_REPRESENTATION('',(#544),#548);+#544 = LINE('',#545,#546);+#545 = CARTESIAN_POINT('',(1.711827418542E-16,-4.966511580277E-17));+#546 = VECTOR('',#547,1.);+#547 = DIRECTION('',(-2.801248917812E-16,1.));+#548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#549 = PCURVE('',#550,#555);+#550 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#551,#552)+ ,(#553,#554+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.41),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#551 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#552 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#553 = CARTESIAN_POINT('',(-0.659324228722,-1.358648457443,0.1));+#554 = CARTESIAN_POINT('',(-0.705,-1.45,0.75));+#555 = DEFINITIONAL_REPRESENTATION('',(#556),#560);+#556 = LINE('',#557,#558);+#557 = CARTESIAN_POINT('',(1.41,-7.837603163075E-17));+#558 = VECTOR('',#559,1.);+#559 = DIRECTION('',(0.,1.));+#560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#561 = ADVANCED_FACE('',(#562),#550,.F.);+#562 = FACE_BOUND('',#563,.F.);+#563 = EDGE_LOOP('',(#564,#586,#587,#615));+#564 = ORIENTED_EDGE('',*,*,#565,.T.);+#565 = EDGE_CURVE('',#566,#487,#568,.T.);+#566 = VERTEX_POINT('',#567);+#567 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#568 = SURFACE_CURVE('',#569,(#573,#579),.PCURVE_S1.);+#569 = LINE('',#570,#571);+#570 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#571 = VECTOR('',#572,1.);+#572 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#573 = PCURVE('',#550,#574);+#574 = DEFINITIONAL_REPRESENTATION('',(#575),#578);+#575 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#576,#577),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.318648457444),.PIECEWISE_BEZIER_KNOTS.);+#576 = CARTESIAN_POINT('',(2.332094702799E-18,-4.688882608039E-17));+#577 = CARTESIAN_POINT('',(1.41,-3.650222601257E-17));+#578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#579 = PCURVE('',#65,#580);+#580 = DEFINITIONAL_REPRESENTATION('',(#581),#585);+#581 = LINE('',#582,#583);+#582 = CARTESIAN_POINT('',(3.020353667697,5.397904345728E-13));+#583 = VECTOR('',#584,1.);+#584 = DIRECTION('',(-0.436587433964,-0.899661832304));+#585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#586 = ORIENTED_EDGE('',*,*,#537,.T.);+#587 = ORIENTED_EDGE('',*,*,#588,.F.);+#588 = EDGE_CURVE('',#589,#510,#591,.T.);+#589 = VERTEX_POINT('',#590);+#590 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#591 = SURFACE_CURVE('',#592,(#596,#603),.PCURVE_S1.);+#592 = LINE('',#593,#594);+#593 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#594 = VECTOR('',#595,1.);+#595 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#596 = PCURVE('',#550,#597);+#597 = DEFINITIONAL_REPRESENTATION('',(#598),#602);+#598 = LINE('',#599,#600);+#599 = CARTESIAN_POINT('',(1.664985591449E-16,1.));+#600 = VECTOR('',#601,1.);+#601 = DIRECTION('',(1.,7.873922160462E-17));+#602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#603 = PCURVE('',#604,#609);+#604 = PLANE('',#605);+#605 = AXIS2_PLACEMENT_3D('',#606,#607,#608);+#606 = CARTESIAN_POINT('',(0.705,-1.45,0.9));+#607 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#608 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#609 = DEFINITIONAL_REPRESENTATION('',(#610),#614);+#610 = LINE('',#611,#612);+#611 = CARTESIAN_POINT('',(-0.,-0.15));+#612 = VECTOR('',#613,1.);+#613 = DIRECTION('',(1.,0.));+#614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#615 = ORIENTED_EDGE('',*,*,#616,.F.);+#616 = EDGE_CURVE('',#566,#589,#617,.T.);+#617 = SURFACE_CURVE('',#618,(#621,#628),.PCURVE_S1.);+#618 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#619,#620),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#619 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#620 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#621 = PCURVE('',#550,#622);+#622 = DEFINITIONAL_REPRESENTATION('',(#623),#627);+#623 = LINE('',#624,#625);+#624 = CARTESIAN_POINT('',(2.332094702799E-18,-4.688882608039E-17));+#625 = VECTOR('',#626,1.);+#626 = DIRECTION('',(1.663168722973E-16,1.));+#627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#628 = PCURVE('',#629,#634);+#629 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#630,#631)+ ,(#632,#633+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#630 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#631 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#632 = CARTESIAN_POINT('',(0.659324228722,-1.358648457443,0.1));+#633 = CARTESIAN_POINT('',(0.705,-1.45,0.75));+#634 = DEFINITIONAL_REPRESENTATION('',(#635),#639);+#635 = LINE('',#636,#637);+#636 = CARTESIAN_POINT('',(0.134350288425,-6.07217739169E-17));+#637 = VECTOR('',#638,1.);+#638 = DIRECTION('',(3.330669073875E-16,1.));+#639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#640 = ADVANCED_FACE('',(#641),#629,.F.);+#641 = FACE_BOUND('',#642,.F.);+#642 = EDGE_LOOP('',(#643,#665,#666,#694));+#643 = ORIENTED_EDGE('',*,*,#644,.T.);+#644 = EDGE_CURVE('',#645,#566,#647,.T.);+#645 = VERTEX_POINT('',#646);+#646 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#647 = SURFACE_CURVE('',#648,(#652,#658),.PCURVE_S1.);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#652 = PCURVE('',#629,#653);+#653 = DEFINITIONAL_REPRESENTATION('',(#654),#657);+#654 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#655,#656),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,6.975499321083E-02),.PIECEWISE_BEZIER_KNOTS.);+#655 = CARTESIAN_POINT('',(-2.835096264296E-16,-6.725629535342E-17));+#656 = CARTESIAN_POINT('',(0.134350288425,-8.488214501621E-17));+#657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#658 = PCURVE('',#65,#659);+#659 = DEFINITIONAL_REPRESENTATION('',(#660),#664);+#660 = LINE('',#661,#662);+#661 = CARTESIAN_POINT('',(2.997512880158,6.590946443822E-02));+#662 = VECTOR('',#663,1.);+#663 = DIRECTION('',(0.32744304726,-0.944870917534));+#664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#665 = ORIENTED_EDGE('',*,*,#616,.T.);+#666 = ORIENTED_EDGE('',*,*,#667,.F.);+#667 = EDGE_CURVE('',#668,#589,#670,.T.);+#668 = VERTEX_POINT('',#669);+#669 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#670 = SURFACE_CURVE('',#671,(#675,#682),.PCURVE_S1.);+#671 = LINE('',#672,#673);+#672 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#673 = VECTOR('',#674,1.);+#674 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#675 = PCURVE('',#629,#676);+#676 = DEFINITIONAL_REPRESENTATION('',(#677),#681);+#677 = LINE('',#678,#679);+#678 = CARTESIAN_POINT('',(-2.980584140513E-17,1.));+#679 = VECTOR('',#680,1.);+#680 = DIRECTION('',(1.,0.));+#681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#682 = PCURVE('',#683,#688);+#683 = PLANE('',#684);+#684 = AXIS2_PLACEMENT_3D('',#685,#686,#687);+#685 = CARTESIAN_POINT('',(0.8,-1.355,0.9));+#686 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#687 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#688 = DEFINITIONAL_REPRESENTATION('',(#689),#693);+#689 = LINE('',#690,#691);+#690 = CARTESIAN_POINT('',(-0.,-0.15));+#691 = VECTOR('',#692,1.);+#692 = DIRECTION('',(1.,0.));+#693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#694 = ORIENTED_EDGE('',*,*,#695,.F.);+#695 = EDGE_CURVE('',#645,#668,#696,.T.);+#696 = SURFACE_CURVE('',#697,(#700,#707),.PCURVE_S1.);+#697 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#698,#699),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#698 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#699 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#700 = PCURVE('',#629,#701);+#701 = DEFINITIONAL_REPRESENTATION('',(#702),#706);+#702 = LINE('',#703,#704);+#703 = CARTESIAN_POINT('',(-2.835096264296E-16,-6.725629535342E-17));+#704 = VECTOR('',#705,1.);+#705 = DIRECTION('',(4.118507024083E-16,1.));+#706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#707 = PCURVE('',#708,#713);+#708 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#709,#710)+ ,(#711,#712+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.71),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#709 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#710 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#711 = CARTESIAN_POINT('',(0.708648457443,-1.309324228722,0.1));+#712 = CARTESIAN_POINT('',(0.8,-1.355,0.75));+#713 = DEFINITIONAL_REPRESENTATION('',(#714),#718);+#714 = LINE('',#715,#716);+#715 = CARTESIAN_POINT('',(2.71,-4.77063817192E-18));+#716 = VECTOR('',#717,1.);+#717 = DIRECTION('',(-4.440892098501E-16,1.));+#718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#719 = ADVANCED_FACE('',(#720),#708,.F.);+#720 = FACE_BOUND('',#721,.F.);+#721 = EDGE_LOOP('',(#722,#744,#745,#773,#801,#829,#857,#885,#913,#941)+ );+#722 = ORIENTED_EDGE('',*,*,#723,.T.);+#723 = EDGE_CURVE('',#724,#645,#726,.T.);+#724 = VERTEX_POINT('',#725);+#725 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#726 = SURFACE_CURVE('',#727,(#731,#737),.PCURVE_S1.);+#727 = LINE('',#728,#729);+#728 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#729 = VECTOR('',#730,1.);+#730 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#731 = PCURVE('',#708,#732);+#732 = DEFINITIONAL_REPRESENTATION('',(#733),#736);+#733 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#734,#735),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,2.618648457444),.PIECEWISE_BEZIER_KNOTS.);+#734 = CARTESIAN_POINT('',(-2.840258528946E-16,-6.237342063396E-17));+#735 = CARTESIAN_POINT('',(2.71,1.356324907117E-17));+#736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#737 = PCURVE('',#65,#738);+#738 = DEFINITIONAL_REPRESENTATION('',(#739),#743);+#739 = LINE('',#740,#741);+#740 = CARTESIAN_POINT('',(0.641614810774,1.209178474928));+#741 = VECTOR('',#742,1.);+#742 = DIRECTION('',(0.899661832304,-0.436587433964));+#743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#744 = ORIENTED_EDGE('',*,*,#695,.T.);+#745 = ORIENTED_EDGE('',*,*,#746,.F.);+#746 = EDGE_CURVE('',#747,#668,#749,.T.);+#747 = VERTEX_POINT('',#748);+#748 = CARTESIAN_POINT('',(0.8,-1.2,0.75));+#749 = SURFACE_CURVE('',#750,(#754,#761),.PCURVE_S1.);+#750 = LINE('',#751,#752);+#751 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#752 = VECTOR('',#753,1.);+#753 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#754 = PCURVE('',#708,#755);+#755 = DEFINITIONAL_REPRESENTATION('',(#756),#760);+#756 = LINE('',#757,#758);+#757 = CARTESIAN_POINT('',(0.,1.));+#758 = VECTOR('',#759,1.);+#759 = DIRECTION('',(1.,0.));+#760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#761 = PCURVE('',#762,#767);+#762 = PLANE('',#763);+#763 = AXIS2_PLACEMENT_3D('',#764,#765,#766);+#764 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#765 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#766 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#767 = DEFINITIONAL_REPRESENTATION('',(#768),#772);+#768 = LINE('',#769,#770);+#769 = CARTESIAN_POINT('',(0.,-0.15));+#770 = VECTOR('',#771,1.);+#771 = DIRECTION('',(1.,0.));+#772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#773 = ORIENTED_EDGE('',*,*,#774,.F.);+#774 = EDGE_CURVE('',#775,#747,#777,.T.);+#775 = VERTEX_POINT('',#776);+#776 = CARTESIAN_POINT('',(0.8,-0.7,0.75));+#777 = SURFACE_CURVE('',#778,(#782,#789),.PCURVE_S1.);+#778 = LINE('',#779,#780);+#779 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#780 = VECTOR('',#781,1.);+#781 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#782 = PCURVE('',#708,#783);+#783 = DEFINITIONAL_REPRESENTATION('',(#784),#788);+#784 = LINE('',#785,#786);+#785 = CARTESIAN_POINT('',(0.,1.));+#786 = VECTOR('',#787,1.);+#787 = DIRECTION('',(1.,0.));+#788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#789 = PCURVE('',#790,#795);+#790 = PLANE('',#791);+#791 = AXIS2_PLACEMENT_3D('',#792,#793,#794);+#792 = CARTESIAN_POINT('',(0.75,-0.7,0.75));+#793 = DIRECTION('',(0.,0.,1.));+#794 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#795 = DEFINITIONAL_REPRESENTATION('',(#796),#800);+#796 = LINE('',#797,#798);+#797 = CARTESIAN_POINT('',(5.E-02,2.055));+#798 = VECTOR('',#799,1.);+#799 = DIRECTION('',(0.,-1.));+#800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#801 = ORIENTED_EDGE('',*,*,#802,.F.);+#802 = EDGE_CURVE('',#803,#775,#805,.T.);+#803 = VERTEX_POINT('',#804);+#804 = CARTESIAN_POINT('',(0.8,-0.25,0.75));+#805 = SURFACE_CURVE('',#806,(#810,#817),.PCURVE_S1.);+#806 = LINE('',#807,#808);+#807 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#808 = VECTOR('',#809,1.);+#809 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#810 = PCURVE('',#708,#811);+#811 = DEFINITIONAL_REPRESENTATION('',(#812),#816);+#812 = LINE('',#813,#814);+#813 = CARTESIAN_POINT('',(0.,1.));+#814 = VECTOR('',#815,1.);+#815 = DIRECTION('',(1.,0.));+#816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#817 = PCURVE('',#818,#823);+#818 = PLANE('',#819);+#819 = AXIS2_PLACEMENT_3D('',#820,#821,#822);+#820 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#821 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#822 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#823 = DEFINITIONAL_REPRESENTATION('',(#824),#828);+#824 = LINE('',#825,#826);+#825 = CARTESIAN_POINT('',(0.,-0.15));+#826 = VECTOR('',#827,1.);+#827 = DIRECTION('',(1.,0.));+#828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#829 = ORIENTED_EDGE('',*,*,#830,.F.);+#830 = EDGE_CURVE('',#831,#803,#833,.T.);+#831 = VERTEX_POINT('',#832);+#832 = CARTESIAN_POINT('',(0.8,0.25,0.75));+#833 = SURFACE_CURVE('',#834,(#838,#845),.PCURVE_S1.);+#834 = LINE('',#835,#836);+#835 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#836 = VECTOR('',#837,1.);+#837 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#838 = PCURVE('',#708,#839);+#839 = DEFINITIONAL_REPRESENTATION('',(#840),#844);+#840 = LINE('',#841,#842);+#841 = CARTESIAN_POINT('',(0.,1.));+#842 = VECTOR('',#843,1.);+#843 = DIRECTION('',(1.,2.22044604925E-16));+#844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#845 = PCURVE('',#846,#851);+#846 = PLANE('',#847);+#847 = AXIS2_PLACEMENT_3D('',#848,#849,#850);+#848 = CARTESIAN_POINT('',(0.75,0.25,0.75));+#849 = DIRECTION('',(0.,0.,1.));+#850 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#851 = DEFINITIONAL_REPRESENTATION('',(#852),#856);+#852 = LINE('',#853,#854);+#853 = CARTESIAN_POINT('',(5.E-02,1.105));+#854 = VECTOR('',#855,1.);+#855 = DIRECTION('',(0.,-1.));+#856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#857 = ORIENTED_EDGE('',*,*,#858,.F.);+#858 = EDGE_CURVE('',#859,#831,#861,.T.);+#859 = VERTEX_POINT('',#860);+#860 = CARTESIAN_POINT('',(0.8,0.7,0.75));+#861 = SURFACE_CURVE('',#862,(#866,#873),.PCURVE_S1.);+#862 = LINE('',#863,#864);+#863 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#864 = VECTOR('',#865,1.);+#865 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#866 = PCURVE('',#708,#867);+#867 = DEFINITIONAL_REPRESENTATION('',(#868),#872);+#868 = LINE('',#869,#870);+#869 = CARTESIAN_POINT('',(0.,1.));+#870 = VECTOR('',#871,1.);+#871 = DIRECTION('',(1.,0.));+#872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#873 = PCURVE('',#874,#879);+#874 = PLANE('',#875);+#875 = AXIS2_PLACEMENT_3D('',#876,#877,#878);+#876 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#877 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#878 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#879 = DEFINITIONAL_REPRESENTATION('',(#880),#884);+#880 = LINE('',#881,#882);+#881 = CARTESIAN_POINT('',(0.,-0.15));+#882 = VECTOR('',#883,1.);+#883 = DIRECTION('',(1.,0.));+#884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#885 = ORIENTED_EDGE('',*,*,#886,.F.);+#886 = EDGE_CURVE('',#887,#859,#889,.T.);+#887 = VERTEX_POINT('',#888);+#888 = CARTESIAN_POINT('',(0.8,1.2,0.75));+#889 = SURFACE_CURVE('',#890,(#894,#901),.PCURVE_S1.);+#890 = LINE('',#891,#892);+#891 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#892 = VECTOR('',#893,1.);+#893 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#894 = PCURVE('',#708,#895);+#895 = DEFINITIONAL_REPRESENTATION('',(#896),#900);+#896 = LINE('',#897,#898);+#897 = CARTESIAN_POINT('',(2.775557561563E-17,1.));+#898 = VECTOR('',#899,1.);+#899 = DIRECTION('',(1.,0.));+#900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#901 = PCURVE('',#902,#907);+#902 = PLANE('',#903);+#903 = AXIS2_PLACEMENT_3D('',#904,#905,#906);+#904 = CARTESIAN_POINT('',(0.75,1.2,0.75));+#905 = DIRECTION('',(0.,0.,1.));+#906 = DIRECTION('',(1.,1.110223024625E-16,-0.));+#907 = DEFINITIONAL_REPRESENTATION('',(#908),#912);+#908 = LINE('',#909,#910);+#909 = CARTESIAN_POINT('',(5.E-02,0.155));+#910 = VECTOR('',#911,1.);+#911 = DIRECTION('',(0.,-1.));+#912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#913 = ORIENTED_EDGE('',*,*,#914,.F.);+#914 = EDGE_CURVE('',#915,#887,#917,.T.);+#915 = VERTEX_POINT('',#916);+#916 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#917 = SURFACE_CURVE('',#918,(#922,#929),.PCURVE_S1.);+#918 = LINE('',#919,#920);+#919 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#920 = VECTOR('',#921,1.);+#921 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#922 = PCURVE('',#708,#923);+#923 = DEFINITIONAL_REPRESENTATION('',(#924),#928);+#924 = LINE('',#925,#926);+#925 = CARTESIAN_POINT('',(9.931166044437E-17,1.));+#926 = VECTOR('',#927,1.);+#927 = DIRECTION('',(1.,-7.16272919113E-16));+#928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#929 = PCURVE('',#930,#935);+#930 = PLANE('',#931);+#931 = AXIS2_PLACEMENT_3D('',#932,#933,#934);+#932 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#933 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#934 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#935 = DEFINITIONAL_REPRESENTATION('',(#936),#940);+#936 = LINE('',#937,#938);+#937 = CARTESIAN_POINT('',(0.,-0.15));+#938 = VECTOR('',#939,1.);+#939 = DIRECTION('',(1.,0.));+#940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#941 = ORIENTED_EDGE('',*,*,#942,.F.);+#942 = EDGE_CURVE('',#724,#915,#943,.T.);+#943 = SURFACE_CURVE('',#944,(#947,#954),.PCURVE_S1.);+#944 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#945,#946),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#945 = CARTESIAN_POINT('',(0.708648457443,1.309324228722,0.1));+#946 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#947 = PCURVE('',#708,#948);+#948 = DEFINITIONAL_REPRESENTATION('',(#949),#953);+#949 = LINE('',#950,#951);+#950 = CARTESIAN_POINT('',(-2.840258528946E-16,-6.237342063396E-17));+#951 = VECTOR('',#952,1.);+#952 = DIRECTION('',(3.83337513339E-16,1.));+#953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#954 = PCURVE('',#92,#955);+#955 = DEFINITIONAL_REPRESENTATION('',(#956),#960);+#956 = LINE('',#957,#958);+#957 = CARTESIAN_POINT('',(0.134350288425,-5.619963771465E-17));+#958 = VECTOR('',#959,1.);+#959 = DIRECTION('',(-2.498001805407E-16,1.));+#960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#961 = ADVANCED_FACE('',(#962),#930,.F.);+#962 = FACE_BOUND('',#963,.F.);+#963 = EDGE_LOOP('',(#964,#989,#990,#1018));+#964 = ORIENTED_EDGE('',*,*,#965,.F.);+#965 = EDGE_CURVE('',#915,#966,#968,.T.);+#966 = VERTEX_POINT('',#967);+#967 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#968 = SURFACE_CURVE('',#969,(#972,#978),.PCURVE_S1.);+#969 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#970,#971),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#970 = CARTESIAN_POINT('',(0.8,1.355,0.75));+#971 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#972 = PCURVE('',#930,#973);+#973 = DEFINITIONAL_REPRESENTATION('',(#974),#977);+#974 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#975,#976),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#975 = CARTESIAN_POINT('',(0.,-0.15));+#976 = CARTESIAN_POINT('',(0.,0.));+#977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#978 = PCURVE('',#979,#984);+#979 = PLANE('',#980);+#980 = AXIS2_PLACEMENT_3D('',#981,#982,#983);+#981 = CARTESIAN_POINT('',(0.705,1.45,0.9));+#982 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#983 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#984 = DEFINITIONAL_REPRESENTATION('',(#985),#988);+#985 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#986,#987),.UNSPECIFIED.,.F.,.F.,+ (2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#986 = CARTESIAN_POINT('',(0.134350288425,-0.15));+#987 = CARTESIAN_POINT('',(0.134350288425,0.));+#988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#989 = ORIENTED_EDGE('',*,*,#914,.T.);+#990 = ORIENTED_EDGE('',*,*,#991,.T.);+#991 = EDGE_CURVE('',#887,#992,#994,.T.);+#992 = VERTEX_POINT('',#993);+#993 = CARTESIAN_POINT('',(0.8,1.2,0.9));+#994 = SURFACE_CURVE('',#995,(#999,#1006),.PCURVE_S1.);+#995 = LINE('',#996,#997);+#996 = CARTESIAN_POINT('',(0.8,1.2,0.670847817658));+#997 = VECTOR('',#998,1.);+#998 = DIRECTION('',(0.,0.,1.));+#999 = PCURVE('',#930,#1000);+#1000 = DEFINITIONAL_REPRESENTATION('',(#1001),#1005);+#1001 = LINE('',#1002,#1003);+#1002 = CARTESIAN_POINT('',(0.155,-0.229152182342));+#1003 = VECTOR('',#1004,1.);+#1004 = DIRECTION('',(0.,1.));+#1005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1006 = PCURVE('',#1007,#1012);+#1007 = PLANE('',#1008);+#1008 = AXIS2_PLACEMENT_3D('',#1009,#1010,#1011);+#1009 = CARTESIAN_POINT('',(1.069123385139,1.2,0.441695635315));+#1010 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1011 = DIRECTION('',(0.,0.,1.));+#1012 = DEFINITIONAL_REPRESENTATION('',(#1013),#1017);+#1013 = LINE('',#1014,#1015);+#1014 = CARTESIAN_POINT('',(0.229152182343,0.269123385139));+#1015 = VECTOR('',#1016,1.);+#1016 = DIRECTION('',(1.,0.));+#1017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1018 = ORIENTED_EDGE('',*,*,#1019,.F.);+#1019 = EDGE_CURVE('',#966,#992,#1020,.T.);+#1020 = SURFACE_CURVE('',#1021,(#1025,#1032),.PCURVE_S1.);+#1021 = LINE('',#1022,#1023);+#1022 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#1023 = VECTOR('',#1024,1.);+#1024 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1025 = PCURVE('',#930,#1026);+#1026 = DEFINITIONAL_REPRESENTATION('',(#1027),#1031);+#1027 = LINE('',#1028,#1029);+#1028 = CARTESIAN_POINT('',(0.,0.));+#1029 = VECTOR('',#1030,1.);+#1030 = DIRECTION('',(1.,0.));+#1031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1032 = PCURVE('',#1033,#1038);+#1033 = PLANE('',#1034);+#1034 = AXIS2_PLACEMENT_3D('',#1035,#1036,#1037);+#1035 = CARTESIAN_POINT('',(-2.091417030376E-16,1.4375,0.9));+#1036 = DIRECTION('',(4.595758349624E-18,6.551522493592E-27,-1.));+#1037 = DIRECTION('',(1.,1.51922136901E-16,4.595758349624E-18));+#1038 = DEFINITIONAL_REPRESENTATION('',(#1039),#1043);+#1039 = LINE('',#1040,#1041);+#1040 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1041 = VECTOR('',#1042,1.);+#1042 = DIRECTION('',(-4.08998344385E-17,1.));+#1043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1044 = ADVANCED_FACE('',(#1045,#1844),#1033,.F.);+#1045 = FACE_BOUND('',#1046,.F.);+#1046 = EDGE_LOOP('',(#1047,#1072,#1095,#1116,#1117,#1140,#1168,#1196,+ #1219,#1247,#1275,#1303,#1326,#1354,#1382,#1410,#1433,#1456,#1479,+ #1502,#1525,#1553,#1581,#1609,#1632,#1660,#1688,#1716,#1739,#1767,+ #1795,#1823));+#1047 = ORIENTED_EDGE('',*,*,#1048,.T.);+#1048 = EDGE_CURVE('',#1049,#1051,#1053,.T.);+#1049 = VERTEX_POINT('',#1050);+#1050 = CARTESIAN_POINT('',(-0.8,1.355,0.9));+#1051 = VERTEX_POINT('',#1052);+#1052 = CARTESIAN_POINT('',(-0.705,1.45,0.9));+#1053 = SURFACE_CURVE('',#1054,(#1058,#1065),.PCURVE_S1.);+#1054 = LINE('',#1055,#1056);+#1055 = CARTESIAN_POINT('',(-0.8,1.355,0.9));+#1056 = VECTOR('',#1057,1.);+#1057 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1058 = PCURVE('',#1033,#1059);+#1059 = DEFINITIONAL_REPRESENTATION('',(#1060),#1064);+#1060 = LINE('',#1061,#1062);+#1061 = CARTESIAN_POINT('',(-0.8,8.25E-02));+#1062 = VECTOR('',#1063,1.);+#1063 = DIRECTION('',(0.707106781187,-0.707106781187));+#1064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1065 = PCURVE('',#199,#1066);+#1066 = DEFINITIONAL_REPRESENTATION('',(#1067),#1071);+#1067 = LINE('',#1068,#1069);+#1068 = CARTESIAN_POINT('',(0.,0.));+#1069 = VECTOR('',#1070,1.);+#1070 = DIRECTION('',(1.,0.));+#1071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1072 = ORIENTED_EDGE('',*,*,#1073,.T.);+#1073 = EDGE_CURVE('',#1051,#1074,#1076,.T.);+#1074 = VERTEX_POINT('',#1075);+#1075 = CARTESIAN_POINT('',(0.705,1.45,0.9));+#1076 = SURFACE_CURVE('',#1077,(#1081,#1088),.PCURVE_S1.);+#1077 = LINE('',#1078,#1079);+#1078 = CARTESIAN_POINT('',(-0.705,1.45,0.9));+#1079 = VECTOR('',#1080,1.);+#1080 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1081 = PCURVE('',#1033,#1082);+#1082 = DEFINITIONAL_REPRESENTATION('',(#1083),#1087);+#1083 = LINE('',#1084,#1085);+#1084 = CARTESIAN_POINT('',(-0.705,-1.25E-02));+#1085 = VECTOR('',#1086,1.);+#1086 = DIRECTION('',(1.,4.08998344385E-17));+#1087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1088 = PCURVE('',#120,#1089);+#1089 = DEFINITIONAL_REPRESENTATION('',(#1090),#1094);+#1090 = LINE('',#1091,#1092);+#1091 = CARTESIAN_POINT('',(0.,0.));+#1092 = VECTOR('',#1093,1.);+#1093 = DIRECTION('',(1.,0.));+#1094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1095 = ORIENTED_EDGE('',*,*,#1096,.T.);+#1096 = EDGE_CURVE('',#1074,#966,#1097,.T.);+#1097 = SURFACE_CURVE('',#1098,(#1102,#1109),.PCURVE_S1.);+#1098 = LINE('',#1099,#1100);+#1099 = CARTESIAN_POINT('',(0.705,1.45,0.9));+#1100 = VECTOR('',#1101,1.);+#1101 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1102 = PCURVE('',#1033,#1103);+#1103 = DEFINITIONAL_REPRESENTATION('',(#1104),#1108);+#1104 = LINE('',#1105,#1106);+#1105 = CARTESIAN_POINT('',(0.705,-1.25E-02));+#1106 = VECTOR('',#1107,1.);+#1107 = DIRECTION('',(0.707106781187,0.707106781187));+#1108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1109 = PCURVE('',#979,#1110);+#1110 = DEFINITIONAL_REPRESENTATION('',(#1111),#1115);+#1111 = LINE('',#1112,#1113);+#1112 = CARTESIAN_POINT('',(0.,0.));+#1113 = VECTOR('',#1114,1.);+#1114 = DIRECTION('',(1.,0.));+#1115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1116 = ORIENTED_EDGE('',*,*,#1019,.T.);+#1117 = ORIENTED_EDGE('',*,*,#1118,.F.);+#1118 = EDGE_CURVE('',#1119,#992,#1121,.T.);+#1119 = VERTEX_POINT('',#1120);+#1120 = CARTESIAN_POINT('',(0.85,1.2,0.9));+#1121 = SURFACE_CURVE('',#1122,(#1126,#1133),.PCURVE_S1.);+#1122 = LINE('',#1123,#1124);+#1123 = CARTESIAN_POINT('',(0.85,1.2,0.9));+#1124 = VECTOR('',#1125,1.);+#1125 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1126 = PCURVE('',#1033,#1127);+#1127 = DEFINITIONAL_REPRESENTATION('',(#1128),#1132);+#1128 = LINE('',#1129,#1130);+#1129 = CARTESIAN_POINT('',(0.85,0.2375));+#1130 = VECTOR('',#1131,1.);+#1131 = DIRECTION('',(-1.,-4.08998344385E-17));+#1132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1133 = PCURVE('',#1007,#1134);+#1134 = DEFINITIONAL_REPRESENTATION('',(#1135),#1139);+#1135 = LINE('',#1136,#1137);+#1136 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1137 = VECTOR('',#1138,1.);+#1138 = DIRECTION('',(0.,1.));+#1139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1140 = ORIENTED_EDGE('',*,*,#1141,.T.);+#1141 = EDGE_CURVE('',#1119,#1142,#1144,.T.);+#1142 = VERTEX_POINT('',#1143);+#1143 = CARTESIAN_POINT('',(0.85,0.7,0.9));+#1144 = SURFACE_CURVE('',#1145,(#1149,#1156),.PCURVE_S1.);+#1145 = LINE('',#1146,#1147);+#1146 = CARTESIAN_POINT('',(0.85,1.2,0.9));+#1147 = VECTOR('',#1148,1.);+#1148 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1149 = PCURVE('',#1033,#1150);+#1150 = DEFINITIONAL_REPRESENTATION('',(#1151),#1155);+#1151 = LINE('',#1152,#1153);+#1152 = CARTESIAN_POINT('',(0.85,0.2375));+#1153 = VECTOR('',#1154,1.);+#1154 = DIRECTION('',(-4.08998344385E-17,1.));+#1155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1156 = PCURVE('',#1157,#1162);+#1157 = CYLINDRICAL_SURFACE('',#1158,0.25);+#1158 = AXIS2_PLACEMENT_3D('',#1159,#1160,#1161);+#1159 = CARTESIAN_POINT('',(0.85,1.2,0.65));+#1160 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1161 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1162 = DEFINITIONAL_REPRESENTATION('',(#1163),#1167);+#1163 = LINE('',#1164,#1165);+#1164 = CARTESIAN_POINT('',(4.886921905584,0.));+#1165 = VECTOR('',#1166,1.);+#1166 = DIRECTION('',(0.,-1.));+#1167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1168 = ORIENTED_EDGE('',*,*,#1169,.T.);+#1169 = EDGE_CURVE('',#1142,#1170,#1172,.T.);+#1170 = VERTEX_POINT('',#1171);+#1171 = CARTESIAN_POINT('',(0.8,0.7,0.9));+#1172 = SURFACE_CURVE('',#1173,(#1177,#1184),.PCURVE_S1.);+#1173 = LINE('',#1174,#1175);+#1174 = CARTESIAN_POINT('',(0.85,0.7,0.9));+#1175 = VECTOR('',#1176,1.);+#1176 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1177 = PCURVE('',#1033,#1178);+#1178 = DEFINITIONAL_REPRESENTATION('',(#1179),#1183);+#1179 = LINE('',#1180,#1181);+#1180 = CARTESIAN_POINT('',(0.85,0.7375));+#1181 = VECTOR('',#1182,1.);+#1182 = DIRECTION('',(-1.,-4.08998344385E-17));+#1183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1184 = PCURVE('',#1185,#1190);+#1185 = PLANE('',#1186);+#1186 = AXIS2_PLACEMENT_3D('',#1187,#1188,#1189);+#1187 = CARTESIAN_POINT('',(1.069123385139,0.7,0.441695635315));+#1188 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1189 = DIRECTION('',(0.,0.,1.));+#1190 = DEFINITIONAL_REPRESENTATION('',(#1191),#1195);+#1191 = LINE('',#1192,#1193);+#1192 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1193 = VECTOR('',#1194,1.);+#1194 = DIRECTION('',(0.,1.));+#1195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1196 = ORIENTED_EDGE('',*,*,#1197,.T.);+#1197 = EDGE_CURVE('',#1170,#1198,#1200,.T.);+#1198 = VERTEX_POINT('',#1199);+#1199 = CARTESIAN_POINT('',(0.8,0.25,0.9));+#1200 = SURFACE_CURVE('',#1201,(#1205,#1212),.PCURVE_S1.);+#1201 = LINE('',#1202,#1203);+#1202 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#1203 = VECTOR('',#1204,1.);+#1204 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1205 = PCURVE('',#1033,#1206);+#1206 = DEFINITIONAL_REPRESENTATION('',(#1207),#1211);+#1207 = LINE('',#1208,#1209);+#1208 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1209 = VECTOR('',#1210,1.);+#1210 = DIRECTION('',(-4.08998344385E-17,1.));+#1211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1212 = PCURVE('',#874,#1213);+#1213 = DEFINITIONAL_REPRESENTATION('',(#1214),#1218);+#1214 = LINE('',#1215,#1216);+#1215 = CARTESIAN_POINT('',(0.,0.));+#1216 = VECTOR('',#1217,1.);+#1217 = DIRECTION('',(1.,0.));+#1218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1219 = ORIENTED_EDGE('',*,*,#1220,.F.);+#1220 = EDGE_CURVE('',#1221,#1198,#1223,.T.);+#1221 = VERTEX_POINT('',#1222);+#1222 = CARTESIAN_POINT('',(0.85,0.25,0.9));+#1223 = SURFACE_CURVE('',#1224,(#1228,#1235),.PCURVE_S1.);+#1224 = LINE('',#1225,#1226);+#1225 = CARTESIAN_POINT('',(0.85,0.25,0.9));+#1226 = VECTOR('',#1227,1.);+#1227 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1228 = PCURVE('',#1033,#1229);+#1229 = DEFINITIONAL_REPRESENTATION('',(#1230),#1234);+#1230 = LINE('',#1231,#1232);+#1231 = CARTESIAN_POINT('',(0.85,1.1875));+#1232 = VECTOR('',#1233,1.);+#1233 = DIRECTION('',(-1.,-4.08998344385E-17));+#1234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1235 = PCURVE('',#1236,#1241);+#1236 = PLANE('',#1237);+#1237 = AXIS2_PLACEMENT_3D('',#1238,#1239,#1240);+#1238 = CARTESIAN_POINT('',(1.069123385139,0.25,0.441695635315));+#1239 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1240 = DIRECTION('',(0.,0.,1.));+#1241 = DEFINITIONAL_REPRESENTATION('',(#1242),#1246);+#1242 = LINE('',#1243,#1244);+#1243 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1244 = VECTOR('',#1245,1.);+#1245 = DIRECTION('',(0.,1.));+#1246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1247 = ORIENTED_EDGE('',*,*,#1248,.T.);+#1248 = EDGE_CURVE('',#1221,#1249,#1251,.T.);+#1249 = VERTEX_POINT('',#1250);+#1250 = CARTESIAN_POINT('',(0.85,-0.25,0.9));+#1251 = SURFACE_CURVE('',#1252,(#1256,#1263),.PCURVE_S1.);+#1252 = LINE('',#1253,#1254);+#1253 = CARTESIAN_POINT('',(0.85,0.25,0.9));+#1254 = VECTOR('',#1255,1.);+#1255 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1256 = PCURVE('',#1033,#1257);+#1257 = DEFINITIONAL_REPRESENTATION('',(#1258),#1262);+#1258 = LINE('',#1259,#1260);+#1259 = CARTESIAN_POINT('',(0.85,1.1875));+#1260 = VECTOR('',#1261,1.);+#1261 = DIRECTION('',(-4.08998344385E-17,1.));+#1262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1263 = PCURVE('',#1264,#1269);+#1264 = CYLINDRICAL_SURFACE('',#1265,0.25);+#1265 = AXIS2_PLACEMENT_3D('',#1266,#1267,#1268);+#1266 = CARTESIAN_POINT('',(0.85,0.25,0.65));+#1267 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1268 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1269 = DEFINITIONAL_REPRESENTATION('',(#1270),#1274);+#1270 = LINE('',#1271,#1272);+#1271 = CARTESIAN_POINT('',(4.886921905584,0.));+#1272 = VECTOR('',#1273,1.);+#1273 = DIRECTION('',(0.,-1.));+#1274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1275 = ORIENTED_EDGE('',*,*,#1276,.T.);+#1276 = EDGE_CURVE('',#1249,#1277,#1279,.T.);+#1277 = VERTEX_POINT('',#1278);+#1278 = CARTESIAN_POINT('',(0.8,-0.25,0.9));+#1279 = SURFACE_CURVE('',#1280,(#1284,#1291),.PCURVE_S1.);+#1280 = LINE('',#1281,#1282);+#1281 = CARTESIAN_POINT('',(0.85,-0.25,0.9));+#1282 = VECTOR('',#1283,1.);+#1283 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1284 = PCURVE('',#1033,#1285);+#1285 = DEFINITIONAL_REPRESENTATION('',(#1286),#1290);+#1286 = LINE('',#1287,#1288);+#1287 = CARTESIAN_POINT('',(0.85,1.6875));+#1288 = VECTOR('',#1289,1.);+#1289 = DIRECTION('',(-1.,-4.08998344385E-17));+#1290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1291 = PCURVE('',#1292,#1297);+#1292 = PLANE('',#1293);+#1293 = AXIS2_PLACEMENT_3D('',#1294,#1295,#1296);+#1294 = CARTESIAN_POINT('',(1.069123385139,-0.25,0.441695635315));+#1295 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1296 = DIRECTION('',(0.,0.,1.));+#1297 = DEFINITIONAL_REPRESENTATION('',(#1298),#1302);+#1298 = LINE('',#1299,#1300);+#1299 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1300 = VECTOR('',#1301,1.);+#1301 = DIRECTION('',(0.,1.));+#1302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1303 = ORIENTED_EDGE('',*,*,#1304,.T.);+#1304 = EDGE_CURVE('',#1277,#1305,#1307,.T.);+#1305 = VERTEX_POINT('',#1306);+#1306 = CARTESIAN_POINT('',(0.8,-0.7,0.9));+#1307 = SURFACE_CURVE('',#1308,(#1312,#1319),.PCURVE_S1.);+#1308 = LINE('',#1309,#1310);+#1309 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#1310 = VECTOR('',#1311,1.);+#1311 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1312 = PCURVE('',#1033,#1313);+#1313 = DEFINITIONAL_REPRESENTATION('',(#1314),#1318);+#1314 = LINE('',#1315,#1316);+#1315 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1316 = VECTOR('',#1317,1.);+#1317 = DIRECTION('',(-4.08998344385E-17,1.));+#1318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1319 = PCURVE('',#818,#1320);+#1320 = DEFINITIONAL_REPRESENTATION('',(#1321),#1325);+#1321 = LINE('',#1322,#1323);+#1322 = CARTESIAN_POINT('',(0.,0.));+#1323 = VECTOR('',#1324,1.);+#1324 = DIRECTION('',(1.,0.));+#1325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1326 = ORIENTED_EDGE('',*,*,#1327,.F.);+#1327 = EDGE_CURVE('',#1328,#1305,#1330,.T.);+#1328 = VERTEX_POINT('',#1329);+#1329 = CARTESIAN_POINT('',(0.85,-0.7,0.9));+#1330 = SURFACE_CURVE('',#1331,(#1335,#1342),.PCURVE_S1.);+#1331 = LINE('',#1332,#1333);+#1332 = CARTESIAN_POINT('',(0.85,-0.7,0.9));+#1333 = VECTOR('',#1334,1.);+#1334 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1335 = PCURVE('',#1033,#1336);+#1336 = DEFINITIONAL_REPRESENTATION('',(#1337),#1341);+#1337 = LINE('',#1338,#1339);+#1338 = CARTESIAN_POINT('',(0.85,2.1375));+#1339 = VECTOR('',#1340,1.);+#1340 = DIRECTION('',(-1.,-4.08998344385E-17));+#1341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1342 = PCURVE('',#1343,#1348);+#1343 = PLANE('',#1344);+#1344 = AXIS2_PLACEMENT_3D('',#1345,#1346,#1347);+#1345 = CARTESIAN_POINT('',(1.069123385139,-0.7,0.441695635315));+#1346 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1347 = DIRECTION('',(0.,0.,1.));+#1348 = DEFINITIONAL_REPRESENTATION('',(#1349),#1353);+#1349 = LINE('',#1350,#1351);+#1350 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1351 = VECTOR('',#1352,1.);+#1352 = DIRECTION('',(0.,1.));+#1353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1354 = ORIENTED_EDGE('',*,*,#1355,.T.);+#1355 = EDGE_CURVE('',#1328,#1356,#1358,.T.);+#1356 = VERTEX_POINT('',#1357);+#1357 = CARTESIAN_POINT('',(0.85,-1.2,0.9));+#1358 = SURFACE_CURVE('',#1359,(#1363,#1370),.PCURVE_S1.);+#1359 = LINE('',#1360,#1361);+#1360 = CARTESIAN_POINT('',(0.85,-0.7,0.9));+#1361 = VECTOR('',#1362,1.);+#1362 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1363 = PCURVE('',#1033,#1364);+#1364 = DEFINITIONAL_REPRESENTATION('',(#1365),#1369);+#1365 = LINE('',#1366,#1367);+#1366 = CARTESIAN_POINT('',(0.85,2.1375));+#1367 = VECTOR('',#1368,1.);+#1368 = DIRECTION('',(-4.08998344385E-17,1.));+#1369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1370 = PCURVE('',#1371,#1376);+#1371 = CYLINDRICAL_SURFACE('',#1372,0.25);+#1372 = AXIS2_PLACEMENT_3D('',#1373,#1374,#1375);+#1373 = CARTESIAN_POINT('',(0.85,-0.7,0.65));+#1374 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1375 = DIRECTION('',(0.984807753012,1.093356242223E-16,0.173648177667)+ );+#1376 = DEFINITIONAL_REPRESENTATION('',(#1377),#1381);+#1377 = LINE('',#1378,#1379);+#1378 = CARTESIAN_POINT('',(4.886921905584,0.));+#1379 = VECTOR('',#1380,1.);+#1380 = DIRECTION('',(0.,-1.));+#1381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1382 = ORIENTED_EDGE('',*,*,#1383,.T.);+#1383 = EDGE_CURVE('',#1356,#1384,#1386,.T.);+#1384 = VERTEX_POINT('',#1385);+#1385 = CARTESIAN_POINT('',(0.8,-1.2,0.9));+#1386 = SURFACE_CURVE('',#1387,(#1391,#1398),.PCURVE_S1.);+#1387 = LINE('',#1388,#1389);+#1388 = CARTESIAN_POINT('',(0.85,-1.2,0.9));+#1389 = VECTOR('',#1390,1.);+#1390 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1391 = PCURVE('',#1033,#1392);+#1392 = DEFINITIONAL_REPRESENTATION('',(#1393),#1397);+#1393 = LINE('',#1394,#1395);+#1394 = CARTESIAN_POINT('',(0.85,2.6375));+#1395 = VECTOR('',#1396,1.);+#1396 = DIRECTION('',(-1.,-4.08998344385E-17));+#1397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1398 = PCURVE('',#1399,#1404);+#1399 = PLANE('',#1400);+#1400 = AXIS2_PLACEMENT_3D('',#1401,#1402,#1403);+#1401 = CARTESIAN_POINT('',(1.069123385139,-1.2,0.441695635315));+#1402 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1403 = DIRECTION('',(0.,0.,1.));+#1404 = DEFINITIONAL_REPRESENTATION('',(#1405),#1409);+#1405 = LINE('',#1406,#1407);+#1406 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1407 = VECTOR('',#1408,1.);+#1408 = DIRECTION('',(0.,1.));+#1409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1410 = ORIENTED_EDGE('',*,*,#1411,.T.);+#1411 = EDGE_CURVE('',#1384,#1412,#1414,.T.);+#1412 = VERTEX_POINT('',#1413);+#1413 = CARTESIAN_POINT('',(0.8,-1.355,0.9));+#1414 = SURFACE_CURVE('',#1415,(#1419,#1426),.PCURVE_S1.);+#1415 = LINE('',#1416,#1417);+#1416 = CARTESIAN_POINT('',(0.8,1.355,0.9));+#1417 = VECTOR('',#1418,1.);+#1418 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#1419 = PCURVE('',#1033,#1420);+#1420 = DEFINITIONAL_REPRESENTATION('',(#1421),#1425);+#1421 = LINE('',#1422,#1423);+#1422 = CARTESIAN_POINT('',(0.8,8.25E-02));+#1423 = VECTOR('',#1424,1.);+#1424 = DIRECTION('',(-4.08998344385E-17,1.));+#1425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1426 = PCURVE('',#762,#1427);+#1427 = DEFINITIONAL_REPRESENTATION('',(#1428),#1432);+#1428 = LINE('',#1429,#1430);+#1429 = CARTESIAN_POINT('',(0.,0.));+#1430 = VECTOR('',#1431,1.);+#1431 = DIRECTION('',(1.,0.));+#1432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1433 = ORIENTED_EDGE('',*,*,#1434,.T.);+#1434 = EDGE_CURVE('',#1412,#1435,#1437,.T.);+#1435 = VERTEX_POINT('',#1436);+#1436 = CARTESIAN_POINT('',(0.705,-1.45,0.9));+#1437 = SURFACE_CURVE('',#1438,(#1442,#1449),.PCURVE_S1.);+#1438 = LINE('',#1439,#1440);+#1439 = CARTESIAN_POINT('',(0.8,-1.355,0.9));+#1440 = VECTOR('',#1441,1.);+#1441 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#1442 = PCURVE('',#1033,#1443);+#1443 = DEFINITIONAL_REPRESENTATION('',(#1444),#1448);+#1444 = LINE('',#1445,#1446);+#1445 = CARTESIAN_POINT('',(0.8,2.7925));+#1446 = VECTOR('',#1447,1.);+#1447 = DIRECTION('',(-0.707106781187,0.707106781187));+#1448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1449 = PCURVE('',#683,#1450);+#1450 = DEFINITIONAL_REPRESENTATION('',(#1451),#1455);+#1451 = LINE('',#1452,#1453);+#1452 = CARTESIAN_POINT('',(0.,0.));+#1453 = VECTOR('',#1454,1.);+#1454 = DIRECTION('',(1.,0.));+#1455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1456 = ORIENTED_EDGE('',*,*,#1457,.T.);+#1457 = EDGE_CURVE('',#1435,#1458,#1460,.T.);+#1458 = VERTEX_POINT('',#1459);+#1459 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));+#1460 = SURFACE_CURVE('',#1461,(#1465,#1472),.PCURVE_S1.);+#1461 = LINE('',#1462,#1463);+#1462 = CARTESIAN_POINT('',(0.705,-1.45,0.9));+#1463 = VECTOR('',#1464,1.);+#1464 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#1465 = PCURVE('',#1033,#1466);+#1466 = DEFINITIONAL_REPRESENTATION('',(#1467),#1471);+#1467 = LINE('',#1468,#1469);+#1468 = CARTESIAN_POINT('',(0.705,2.8875));+#1469 = VECTOR('',#1470,1.);+#1470 = DIRECTION('',(-1.,-4.08998344385E-17));+#1471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1472 = PCURVE('',#604,#1473);+#1473 = DEFINITIONAL_REPRESENTATION('',(#1474),#1478);+#1474 = LINE('',#1475,#1476);+#1475 = CARTESIAN_POINT('',(0.,0.));+#1476 = VECTOR('',#1477,1.);+#1477 = DIRECTION('',(1.,0.));+#1478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1479 = ORIENTED_EDGE('',*,*,#1480,.T.);+#1480 = EDGE_CURVE('',#1458,#1481,#1483,.T.);+#1481 = VERTEX_POINT('',#1482);+#1482 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#1483 = SURFACE_CURVE('',#1484,(#1488,#1495),.PCURVE_S1.);+#1484 = LINE('',#1485,#1486);+#1485 = CARTESIAN_POINT('',(-0.705,-1.45,0.9));+#1486 = VECTOR('',#1487,1.);+#1487 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1488 = PCURVE('',#1033,#1489);+#1489 = DEFINITIONAL_REPRESENTATION('',(#1490),#1494);+#1490 = LINE('',#1491,#1492);+#1491 = CARTESIAN_POINT('',(-0.705,2.8875));+#1492 = VECTOR('',#1493,1.);+#1493 = DIRECTION('',(-0.707106781187,-0.707106781187));+#1494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1495 = PCURVE('',#525,#1496);+#1496 = DEFINITIONAL_REPRESENTATION('',(#1497),#1501);+#1497 = LINE('',#1498,#1499);+#1498 = CARTESIAN_POINT('',(0.,0.));+#1499 = VECTOR('',#1500,1.);+#1500 = DIRECTION('',(1.,0.));+#1501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1502 = ORIENTED_EDGE('',*,*,#1503,.T.);+#1503 = EDGE_CURVE('',#1481,#1504,#1506,.T.);+#1504 = VERTEX_POINT('',#1505);+#1505 = CARTESIAN_POINT('',(-0.8,-1.2,0.9));+#1506 = SURFACE_CURVE('',#1507,(#1511,#1518),.PCURVE_S1.);+#1507 = LINE('',#1508,#1509);+#1508 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#1509 = VECTOR('',#1510,1.);+#1510 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1511 = PCURVE('',#1033,#1512);+#1512 = DEFINITIONAL_REPRESENTATION('',(#1513),#1517);+#1513 = LINE('',#1514,#1515);+#1514 = CARTESIAN_POINT('',(-0.8,2.7925));+#1515 = VECTOR('',#1516,1.);+#1516 = DIRECTION('',(4.08998344385E-17,-1.));+#1517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1518 = PCURVE('',#446,#1519);+#1519 = DEFINITIONAL_REPRESENTATION('',(#1520),#1524);+#1520 = LINE('',#1521,#1522);+#1521 = CARTESIAN_POINT('',(0.,0.));+#1522 = VECTOR('',#1523,1.);+#1523 = DIRECTION('',(1.,0.));+#1524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1525 = ORIENTED_EDGE('',*,*,#1526,.F.);+#1526 = EDGE_CURVE('',#1527,#1504,#1529,.T.);+#1527 = VERTEX_POINT('',#1528);+#1528 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));+#1529 = SURFACE_CURVE('',#1530,(#1534,#1541),.PCURVE_S1.);+#1530 = LINE('',#1531,#1532);+#1531 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));+#1532 = VECTOR('',#1533,1.);+#1533 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1534 = PCURVE('',#1033,#1535);+#1535 = DEFINITIONAL_REPRESENTATION('',(#1536),#1540);+#1536 = LINE('',#1537,#1538);+#1537 = CARTESIAN_POINT('',(-0.85,2.6375));+#1538 = VECTOR('',#1539,1.);+#1539 = DIRECTION('',(1.,1.633645143532E-16));+#1540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1541 = PCURVE('',#1542,#1547);+#1542 = PLANE('',#1543);+#1543 = AXIS2_PLACEMENT_3D('',#1544,#1545,#1546);+#1544 = CARTESIAN_POINT('',(-1.069123385139,-1.2,0.441695635315));+#1545 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1546 = DIRECTION('',(0.,-0.,1.));+#1547 = DEFINITIONAL_REPRESENTATION('',(#1548),#1552);+#1548 = LINE('',#1549,#1550);+#1549 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1550 = VECTOR('',#1551,1.);+#1551 = DIRECTION('',(0.,1.));+#1552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1553 = ORIENTED_EDGE('',*,*,#1554,.T.);+#1554 = EDGE_CURVE('',#1527,#1555,#1557,.T.);+#1555 = VERTEX_POINT('',#1556);+#1556 = CARTESIAN_POINT('',(-0.85,-0.7,0.9));+#1557 = SURFACE_CURVE('',#1558,(#1562,#1569),.PCURVE_S1.);+#1558 = LINE('',#1559,#1560);+#1559 = CARTESIAN_POINT('',(-0.85,-1.2,0.9));+#1560 = VECTOR('',#1561,1.);+#1561 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1562 = PCURVE('',#1033,#1563);+#1563 = DEFINITIONAL_REPRESENTATION('',(#1564),#1568);+#1564 = LINE('',#1565,#1566);+#1565 = CARTESIAN_POINT('',(-0.85,2.6375));+#1566 = VECTOR('',#1567,1.);+#1567 = DIRECTION('',(1.633645143532E-16,-1.));+#1568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1569 = PCURVE('',#1570,#1575);+#1570 = CYLINDRICAL_SURFACE('',#1571,0.25);+#1571 = AXIS2_PLACEMENT_3D('',#1572,#1573,#1574);+#1572 = CARTESIAN_POINT('',(-0.85,-1.2,0.65));+#1573 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1574 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1575 = DEFINITIONAL_REPRESENTATION('',(#1576),#1580);+#1576 = LINE('',#1577,#1578);+#1577 = CARTESIAN_POINT('',(4.886921905584,0.));+#1578 = VECTOR('',#1579,1.);+#1579 = DIRECTION('',(0.,-1.));+#1580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1581 = ORIENTED_EDGE('',*,*,#1582,.T.);+#1582 = EDGE_CURVE('',#1555,#1583,#1585,.T.);+#1583 = VERTEX_POINT('',#1584);+#1584 = CARTESIAN_POINT('',(-0.8,-0.7,0.9));+#1585 = SURFACE_CURVE('',#1586,(#1590,#1597),.PCURVE_S1.);+#1586 = LINE('',#1587,#1588);+#1587 = CARTESIAN_POINT('',(-0.85,-0.7,0.9));+#1588 = VECTOR('',#1589,1.);+#1589 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1590 = PCURVE('',#1033,#1591);+#1591 = DEFINITIONAL_REPRESENTATION('',(#1592),#1596);+#1592 = LINE('',#1593,#1594);+#1593 = CARTESIAN_POINT('',(-0.85,2.1375));+#1594 = VECTOR('',#1595,1.);+#1595 = DIRECTION('',(1.,1.633645143532E-16));+#1596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1597 = PCURVE('',#1598,#1603);+#1598 = PLANE('',#1599);+#1599 = AXIS2_PLACEMENT_3D('',#1600,#1601,#1602);+#1600 = CARTESIAN_POINT('',(-1.069123385139,-0.7,0.441695635315));+#1601 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1602 = DIRECTION('',(0.,-0.,1.));+#1603 = DEFINITIONAL_REPRESENTATION('',(#1604),#1608);+#1604 = LINE('',#1605,#1606);+#1605 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1606 = VECTOR('',#1607,1.);+#1607 = DIRECTION('',(0.,1.));+#1608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1609 = ORIENTED_EDGE('',*,*,#1610,.T.);+#1610 = EDGE_CURVE('',#1583,#1611,#1613,.T.);+#1611 = VERTEX_POINT('',#1612);+#1612 = CARTESIAN_POINT('',(-0.8,-0.25,0.9));+#1613 = SURFACE_CURVE('',#1614,(#1618,#1625),.PCURVE_S1.);+#1614 = LINE('',#1615,#1616);+#1615 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#1616 = VECTOR('',#1617,1.);+#1617 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1618 = PCURVE('',#1033,#1619);+#1619 = DEFINITIONAL_REPRESENTATION('',(#1620),#1624);+#1620 = LINE('',#1621,#1622);+#1621 = CARTESIAN_POINT('',(-0.8,2.7925));+#1622 = VECTOR('',#1623,1.);+#1623 = DIRECTION('',(4.08998344385E-17,-1.));+#1624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1625 = PCURVE('',#390,#1626);+#1626 = DEFINITIONAL_REPRESENTATION('',(#1627),#1631);+#1627 = LINE('',#1628,#1629);+#1628 = CARTESIAN_POINT('',(0.,0.));+#1629 = VECTOR('',#1630,1.);+#1630 = DIRECTION('',(1.,0.));+#1631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1632 = ORIENTED_EDGE('',*,*,#1633,.F.);+#1633 = EDGE_CURVE('',#1634,#1611,#1636,.T.);+#1634 = VERTEX_POINT('',#1635);+#1635 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#1636 = SURFACE_CURVE('',#1637,(#1641,#1648),.PCURVE_S1.);+#1637 = LINE('',#1638,#1639);+#1638 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#1639 = VECTOR('',#1640,1.);+#1640 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1641 = PCURVE('',#1033,#1642);+#1642 = DEFINITIONAL_REPRESENTATION('',(#1643),#1647);+#1643 = LINE('',#1644,#1645);+#1644 = CARTESIAN_POINT('',(-0.85,1.6875));+#1645 = VECTOR('',#1646,1.);+#1646 = DIRECTION('',(1.,1.633645143532E-16));+#1647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1648 = PCURVE('',#1649,#1654);+#1649 = PLANE('',#1650);+#1650 = AXIS2_PLACEMENT_3D('',#1651,#1652,#1653);+#1651 = CARTESIAN_POINT('',(-1.069123385139,-0.25,0.441695635315));+#1652 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1653 = DIRECTION('',(0.,-0.,1.));+#1654 = DEFINITIONAL_REPRESENTATION('',(#1655),#1659);+#1655 = LINE('',#1656,#1657);+#1656 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1657 = VECTOR('',#1658,1.);+#1658 = DIRECTION('',(0.,1.));+#1659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1660 = ORIENTED_EDGE('',*,*,#1661,.T.);+#1661 = EDGE_CURVE('',#1634,#1662,#1664,.T.);+#1662 = VERTEX_POINT('',#1663);+#1663 = CARTESIAN_POINT('',(-0.85,0.25,0.9));+#1664 = SURFACE_CURVE('',#1665,(#1669,#1676),.PCURVE_S1.);+#1665 = LINE('',#1666,#1667);+#1666 = CARTESIAN_POINT('',(-0.85,-0.25,0.9));+#1667 = VECTOR('',#1668,1.);+#1668 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1669 = PCURVE('',#1033,#1670);+#1670 = DEFINITIONAL_REPRESENTATION('',(#1671),#1675);+#1671 = LINE('',#1672,#1673);+#1672 = CARTESIAN_POINT('',(-0.85,1.6875));+#1673 = VECTOR('',#1674,1.);+#1674 = DIRECTION('',(1.633645143532E-16,-1.));+#1675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1676 = PCURVE('',#1677,#1682);+#1677 = CYLINDRICAL_SURFACE('',#1678,0.25);+#1678 = AXIS2_PLACEMENT_3D('',#1679,#1680,#1681);+#1679 = CARTESIAN_POINT('',(-0.85,-0.25,0.65));+#1680 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1681 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1682 = DEFINITIONAL_REPRESENTATION('',(#1683),#1687);+#1683 = LINE('',#1684,#1685);+#1684 = CARTESIAN_POINT('',(4.886921905584,0.));+#1685 = VECTOR('',#1686,1.);+#1686 = DIRECTION('',(0.,-1.));+#1687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1688 = ORIENTED_EDGE('',*,*,#1689,.T.);+#1689 = EDGE_CURVE('',#1662,#1690,#1692,.T.);+#1690 = VERTEX_POINT('',#1691);+#1691 = CARTESIAN_POINT('',(-0.8,0.25,0.9));+#1692 = SURFACE_CURVE('',#1693,(#1697,#1704),.PCURVE_S1.);+#1693 = LINE('',#1694,#1695);+#1694 = CARTESIAN_POINT('',(-0.85,0.25,0.9));+#1695 = VECTOR('',#1696,1.);+#1696 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1697 = PCURVE('',#1033,#1698);+#1698 = DEFINITIONAL_REPRESENTATION('',(#1699),#1703);+#1699 = LINE('',#1700,#1701);+#1700 = CARTESIAN_POINT('',(-0.85,1.1875));+#1701 = VECTOR('',#1702,1.);+#1702 = DIRECTION('',(1.,1.633645143532E-16));+#1703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1704 = PCURVE('',#1705,#1710);+#1705 = PLANE('',#1706);+#1706 = AXIS2_PLACEMENT_3D('',#1707,#1708,#1709);+#1707 = CARTESIAN_POINT('',(-1.069123385139,0.25,0.441695635315));+#1708 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1709 = DIRECTION('',(0.,-0.,1.));+#1710 = DEFINITIONAL_REPRESENTATION('',(#1711),#1715);+#1711 = LINE('',#1712,#1713);+#1712 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1713 = VECTOR('',#1714,1.);+#1714 = DIRECTION('',(0.,1.));+#1715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1716 = ORIENTED_EDGE('',*,*,#1717,.T.);+#1717 = EDGE_CURVE('',#1690,#1718,#1720,.T.);+#1718 = VERTEX_POINT('',#1719);+#1719 = CARTESIAN_POINT('',(-0.8,0.7,0.9));+#1720 = SURFACE_CURVE('',#1721,(#1725,#1732),.PCURVE_S1.);+#1721 = LINE('',#1722,#1723);+#1722 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#1723 = VECTOR('',#1724,1.);+#1724 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1725 = PCURVE('',#1033,#1726);+#1726 = DEFINITIONAL_REPRESENTATION('',(#1727),#1731);+#1727 = LINE('',#1728,#1729);+#1728 = CARTESIAN_POINT('',(-0.8,2.7925));+#1729 = VECTOR('',#1730,1.);+#1730 = DIRECTION('',(4.08998344385E-17,-1.));+#1731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1732 = PCURVE('',#334,#1733);+#1733 = DEFINITIONAL_REPRESENTATION('',(#1734),#1738);+#1734 = LINE('',#1735,#1736);+#1735 = CARTESIAN_POINT('',(0.,0.));+#1736 = VECTOR('',#1737,1.);+#1737 = DIRECTION('',(1.,0.));+#1738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1739 = ORIENTED_EDGE('',*,*,#1740,.F.);+#1740 = EDGE_CURVE('',#1741,#1718,#1743,.T.);+#1741 = VERTEX_POINT('',#1742);+#1742 = CARTESIAN_POINT('',(-0.85,0.7,0.9));+#1743 = SURFACE_CURVE('',#1744,(#1748,#1755),.PCURVE_S1.);+#1744 = LINE('',#1745,#1746);+#1745 = CARTESIAN_POINT('',(-0.85,0.7,0.9));+#1746 = VECTOR('',#1747,1.);+#1747 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1748 = PCURVE('',#1033,#1749);+#1749 = DEFINITIONAL_REPRESENTATION('',(#1750),#1754);+#1750 = LINE('',#1751,#1752);+#1751 = CARTESIAN_POINT('',(-0.85,0.7375));+#1752 = VECTOR('',#1753,1.);+#1753 = DIRECTION('',(1.,1.633645143532E-16));+#1754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1755 = PCURVE('',#1756,#1761);+#1756 = PLANE('',#1757);+#1757 = AXIS2_PLACEMENT_3D('',#1758,#1759,#1760);+#1758 = CARTESIAN_POINT('',(-1.069123385139,0.7,0.441695635315));+#1759 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1760 = DIRECTION('',(0.,-0.,1.));+#1761 = DEFINITIONAL_REPRESENTATION('',(#1762),#1766);+#1762 = LINE('',#1763,#1764);+#1763 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1764 = VECTOR('',#1765,1.);+#1765 = DIRECTION('',(0.,1.));+#1766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1767 = ORIENTED_EDGE('',*,*,#1768,.T.);+#1768 = EDGE_CURVE('',#1741,#1769,#1771,.T.);+#1769 = VERTEX_POINT('',#1770);+#1770 = CARTESIAN_POINT('',(-0.85,1.2,0.9));+#1771 = SURFACE_CURVE('',#1772,(#1776,#1783),.PCURVE_S1.);+#1772 = LINE('',#1773,#1774);+#1773 = CARTESIAN_POINT('',(-0.85,0.7,0.9));+#1774 = VECTOR('',#1775,1.);+#1775 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1776 = PCURVE('',#1033,#1777);+#1777 = DEFINITIONAL_REPRESENTATION('',(#1778),#1782);+#1778 = LINE('',#1779,#1780);+#1779 = CARTESIAN_POINT('',(-0.85,0.7375));+#1780 = VECTOR('',#1781,1.);+#1781 = DIRECTION('',(1.633645143532E-16,-1.));+#1782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1783 = PCURVE('',#1784,#1789);+#1784 = CYLINDRICAL_SURFACE('',#1785,0.25);+#1785 = AXIS2_PLACEMENT_3D('',#1786,#1787,#1788);+#1786 = CARTESIAN_POINT('',(-0.85,0.7,0.65));+#1787 = DIRECTION('',(-1.144237745222E-17,-1.,0.));+#1788 = DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667)+ );+#1789 = DEFINITIONAL_REPRESENTATION('',(#1790),#1794);+#1790 = LINE('',#1791,#1792);+#1791 = CARTESIAN_POINT('',(4.886921905584,0.));+#1792 = VECTOR('',#1793,1.);+#1793 = DIRECTION('',(0.,-1.));+#1794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1795 = ORIENTED_EDGE('',*,*,#1796,.T.);+#1796 = EDGE_CURVE('',#1769,#1797,#1799,.T.);+#1797 = VERTEX_POINT('',#1798);+#1798 = CARTESIAN_POINT('',(-0.8,1.2,0.9));+#1799 = SURFACE_CURVE('',#1800,(#1804,#1811),.PCURVE_S1.);+#1800 = LINE('',#1801,#1802);+#1801 = CARTESIAN_POINT('',(-0.85,1.2,0.9));+#1802 = VECTOR('',#1803,1.);+#1803 = DIRECTION('',(1.,-1.144237745222E-17,0.));+#1804 = PCURVE('',#1033,#1805);+#1805 = DEFINITIONAL_REPRESENTATION('',(#1806),#1810);+#1806 = LINE('',#1807,#1808);+#1807 = CARTESIAN_POINT('',(-0.85,0.2375));+#1808 = VECTOR('',#1809,1.);+#1809 = DIRECTION('',(1.,1.633645143532E-16));+#1810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1811 = PCURVE('',#1812,#1817);+#1812 = PLANE('',#1813);+#1813 = AXIS2_PLACEMENT_3D('',#1814,#1815,#1816);+#1814 = CARTESIAN_POINT('',(-1.069123385139,1.2,0.441695635315));+#1815 = DIRECTION('',(1.144237745222E-17,1.,0.));+#1816 = DIRECTION('',(0.,-0.,1.));+#1817 = DEFINITIONAL_REPRESENTATION('',(#1818),#1822);+#1818 = LINE('',#1819,#1820);+#1819 = CARTESIAN_POINT('',(0.458304364685,0.219123385139));+#1820 = VECTOR('',#1821,1.);+#1821 = DIRECTION('',(0.,1.));+#1822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1823 = ORIENTED_EDGE('',*,*,#1824,.T.);+#1824 = EDGE_CURVE('',#1797,#1049,#1825,.T.);+#1825 = SURFACE_CURVE('',#1826,(#1830,#1837),.PCURVE_S1.);+#1826 = LINE('',#1827,#1828);+#1827 = CARTESIAN_POINT('',(-0.8,-1.355,0.9));+#1828 = VECTOR('',#1829,1.);+#1829 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#1830 = PCURVE('',#1033,#1831);+#1831 = DEFINITIONAL_REPRESENTATION('',(#1832),#1836);+#1832 = LINE('',#1833,#1834);+#1833 = CARTESIAN_POINT('',(-0.8,2.7925));+#1834 = VECTOR('',#1835,1.);+#1835 = DIRECTION('',(4.08998344385E-17,-1.));+#1836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1837 = PCURVE('',#278,#1838);+#1838 = DEFINITIONAL_REPRESENTATION('',(#1839),#1843);+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(0.,0.));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(1.,0.));+#1843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1844 = FACE_BOUND('',#1845,.F.);+#1845 = EDGE_LOOP('',(#1846,#1876,#1904,#1932,#1960,#1988,#2016,#2044));+#1846 = ORIENTED_EDGE('',*,*,#1847,.F.);+#1847 = EDGE_CURVE('',#1848,#1850,#1852,.T.);+#1848 = VERTEX_POINT('',#1849);+#1849 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1850 = VERTEX_POINT('',#1851);+#1851 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#1852 = SURFACE_CURVE('',#1853,(#1857,#1864),.PCURVE_S1.);+#1853 = LINE('',#1854,#1855);+#1854 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1855 = VECTOR('',#1856,1.);+#1856 = DIRECTION('',(0.,-1.,0.));+#1857 = PCURVE('',#1033,#1858);+#1858 = DEFINITIONAL_REPRESENTATION('',(#1859),#1863);+#1859 = LINE('',#1860,#1861);+#1860 = CARTESIAN_POINT('',(0.775,9.5E-02));+#1861 = VECTOR('',#1862,1.);+#1862 = DIRECTION('',(-1.51922136901E-16,1.));+#1863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1864 = PCURVE('',#1865,#1870);+#1865 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1866,#1867)+ ,(#1868,#1869+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#1866 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1867 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#1868 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#1869 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#1870 = DEFINITIONAL_REPRESENTATION('',(#1871),#1875);+#1871 = LINE('',#1872,#1873);+#1872 = CARTESIAN_POINT('',(-5.186163350322E-17,-1.341935040617E-16));+#1873 = VECTOR('',#1874,1.);+#1874 = DIRECTION('',(1.,2.178642469984E-16));+#1875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1876 = ORIENTED_EDGE('',*,*,#1877,.F.);+#1877 = EDGE_CURVE('',#1878,#1848,#1880,.T.);+#1878 = VERTEX_POINT('',#1879);+#1879 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#1880 = SURFACE_CURVE('',#1881,(#1885,#1892),.PCURVE_S1.);+#1881 = LINE('',#1882,#1883);+#1882 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#1883 = VECTOR('',#1884,1.);+#1884 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#1885 = PCURVE('',#1033,#1886);+#1886 = DEFINITIONAL_REPRESENTATION('',(#1887),#1891);+#1887 = LINE('',#1888,#1889);+#1888 = CARTESIAN_POINT('',(0.6925,1.25E-02));+#1889 = VECTOR('',#1890,1.);+#1890 = DIRECTION('',(0.707106781187,0.707106781187));+#1891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1892 = PCURVE('',#1893,#1898);+#1893 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1894,#1895)+ ,(#1896,#1897+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#1894 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#1895 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#1896 = CARTESIAN_POINT('',(0.775,1.3425,0.9));+#1897 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#1898 = DEFINITIONAL_REPRESENTATION('',(#1899),#1903);+#1899 = LINE('',#1900,#1901);+#1900 = CARTESIAN_POINT('',(-3.005317854125E-17,-7.118080236816E-17));+#1901 = VECTOR('',#1902,1.);+#1902 = DIRECTION('',(1.,1.674888819215E-19));+#1903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1904 = ORIENTED_EDGE('',*,*,#1905,.F.);+#1905 = EDGE_CURVE('',#1906,#1878,#1908,.T.);+#1906 = VERTEX_POINT('',#1907);+#1907 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#1908 = SURFACE_CURVE('',#1909,(#1913,#1920),.PCURVE_S1.);+#1909 = LINE('',#1910,#1911);+#1910 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#1911 = VECTOR('',#1912,1.);+#1912 = DIRECTION('',(1.,1.110223024625E-16,0.));+#1913 = PCURVE('',#1033,#1914);+#1914 = DEFINITIONAL_REPRESENTATION('',(#1915),#1919);+#1915 = LINE('',#1916,#1917);+#1916 = CARTESIAN_POINT('',(-0.6925,1.25E-02));+#1917 = VECTOR('',#1918,1.);+#1918 = DIRECTION('',(1.,4.08998344385E-17));+#1919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1920 = PCURVE('',#1921,#1926);+#1921 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1922,#1923)+ ,(#1924,#1925+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#1922 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#1923 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#1924 = CARTESIAN_POINT('',(0.6925,1.425,0.9));+#1925 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#1926 = DEFINITIONAL_REPRESENTATION('',(#1927),#1931);+#1927 = LINE('',#1928,#1929);+#1928 = CARTESIAN_POINT('',(2.172828727272E-17,-2.020161006056E-17));+#1929 = VECTOR('',#1930,1.);+#1930 = DIRECTION('',(1.,-6.800608070842E-17));+#1931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1932 = ORIENTED_EDGE('',*,*,#1933,.F.);+#1933 = EDGE_CURVE('',#1934,#1906,#1936,.T.);+#1934 = VERTEX_POINT('',#1935);+#1935 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#1936 = SURFACE_CURVE('',#1937,(#1941,#1948),.PCURVE_S1.);+#1937 = LINE('',#1938,#1939);+#1938 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#1939 = VECTOR('',#1940,1.);+#1940 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#1941 = PCURVE('',#1033,#1942);+#1942 = DEFINITIONAL_REPRESENTATION('',(#1943),#1947);+#1943 = LINE('',#1944,#1945);+#1944 = CARTESIAN_POINT('',(-0.775,9.5E-02));+#1945 = VECTOR('',#1946,1.);+#1946 = DIRECTION('',(0.707106781187,-0.707106781187));+#1947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1948 = PCURVE('',#1949,#1954);+#1949 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1950,#1951)+ ,(#1952,#1953+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#1950 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#1951 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#1952 = CARTESIAN_POINT('',(-0.6925,1.425,0.9));+#1953 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#1954 = DEFINITIONAL_REPRESENTATION('',(#1955),#1959);+#1955 = LINE('',#1956,#1957);+#1956 = CARTESIAN_POINT('',(4.791761211492E-17,-5.355652820008E-17));+#1957 = VECTOR('',#1958,1.);+#1958 = DIRECTION('',(1.,-1.674891034764E-19));+#1959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1960 = ORIENTED_EDGE('',*,*,#1961,.F.);+#1961 = EDGE_CURVE('',#1962,#1934,#1964,.T.);+#1962 = VERTEX_POINT('',#1963);+#1963 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1964 = SURFACE_CURVE('',#1965,(#1969,#1976),.PCURVE_S1.);+#1965 = LINE('',#1966,#1967);+#1966 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1967 = VECTOR('',#1968,1.);+#1968 = DIRECTION('',(0.,1.,0.));+#1969 = PCURVE('',#1033,#1970);+#1970 = DEFINITIONAL_REPRESENTATION('',(#1971),#1975);+#1971 = LINE('',#1972,#1973);+#1972 = CARTESIAN_POINT('',(-0.775,2.78));+#1973 = VECTOR('',#1974,1.);+#1974 = DIRECTION('',(1.51922136901E-16,-1.));+#1975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1976 = PCURVE('',#1977,#1982);+#1977 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#1978,#1979)+ ,(#1980,#1981+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,2.685),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#1978 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#1979 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#1980 = CARTESIAN_POINT('',(-0.775,1.3425,0.9));+#1981 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#1982 = DEFINITIONAL_REPRESENTATION('',(#1983),#1987);+#1983 = LINE('',#1984,#1985);+#1984 = CARTESIAN_POINT('',(-5.186163350322E-17,-1.341935040617E-16));+#1985 = VECTOR('',#1986,1.);+#1986 = DIRECTION('',(1.,2.178642469984E-16));+#1987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1988 = ORIENTED_EDGE('',*,*,#1989,.F.);+#1989 = EDGE_CURVE('',#1990,#1962,#1992,.T.);+#1990 = VERTEX_POINT('',#1991);+#1991 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#1992 = SURFACE_CURVE('',#1993,(#1997,#2004),.PCURVE_S1.);+#1993 = LINE('',#1994,#1995);+#1994 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#1995 = VECTOR('',#1996,1.);+#1996 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#1997 = PCURVE('',#1033,#1998);+#1998 = DEFINITIONAL_REPRESENTATION('',(#1999),#2003);+#1999 = LINE('',#2000,#2001);+#2000 = CARTESIAN_POINT('',(-0.6925,2.8625));+#2001 = VECTOR('',#2002,1.);+#2002 = DIRECTION('',(-0.707106781187,-0.707106781187));+#2003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2004 = PCURVE('',#2005,#2010);+#2005 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2006,#2007)+ ,(#2008,#2009+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2006 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#2007 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2008 = CARTESIAN_POINT('',(-0.775,-1.3425,0.9));+#2009 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#2010 = DEFINITIONAL_REPRESENTATION('',(#2011),#2015);+#2011 = LINE('',#2012,#2013);+#2012 = CARTESIAN_POINT('',(-3.005317854125E-17,-7.118080236816E-17));+#2013 = VECTOR('',#2014,1.);+#2014 = DIRECTION('',(1.,1.674888819215E-19));+#2015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2016 = ORIENTED_EDGE('',*,*,#2017,.F.);+#2017 = EDGE_CURVE('',#2018,#1990,#2020,.T.);+#2018 = VERTEX_POINT('',#2019);+#2019 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#2020 = SURFACE_CURVE('',#2021,(#2025,#2032),.PCURVE_S1.);+#2021 = LINE('',#2022,#2023);+#2022 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#2023 = VECTOR('',#2024,1.);+#2024 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2025 = PCURVE('',#1033,#2026);+#2026 = DEFINITIONAL_REPRESENTATION('',(#2027),#2031);+#2027 = LINE('',#2028,#2029);+#2028 = CARTESIAN_POINT('',(0.6925,2.8625));+#2029 = VECTOR('',#2030,1.);+#2030 = DIRECTION('',(-1.,-4.08998344385E-17));+#2031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2032 = PCURVE('',#2033,#2038);+#2033 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2034,#2035)+ ,(#2036,#2037+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.385),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#2034 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#2035 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2036 = CARTESIAN_POINT('',(-0.6925,-1.425,0.9));+#2037 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2038 = DEFINITIONAL_REPRESENTATION('',(#2039),#2043);+#2039 = LINE('',#2040,#2041);+#2040 = CARTESIAN_POINT('',(2.172828727272E-17,-2.020161006056E-17));+#2041 = VECTOR('',#2042,1.);+#2042 = DIRECTION('',(1.,-6.800608070842E-17));+#2043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2044 = ORIENTED_EDGE('',*,*,#2045,.F.);+#2045 = EDGE_CURVE('',#1850,#2018,#2046,.T.);+#2046 = SURFACE_CURVE('',#2047,(#2051,#2058),.PCURVE_S1.);+#2047 = LINE('',#2048,#2049);+#2048 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#2049 = VECTOR('',#2050,1.);+#2050 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2051 = PCURVE('',#1033,#2052);+#2052 = DEFINITIONAL_REPRESENTATION('',(#2053),#2057);+#2053 = LINE('',#2054,#2055);+#2054 = CARTESIAN_POINT('',(0.775,2.78));+#2055 = VECTOR('',#2056,1.);+#2056 = DIRECTION('',(-0.707106781187,0.707106781187));+#2057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2058 = PCURVE('',#2059,#2064);+#2059 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,(+ (#2060,#2061)+ ,(#2062,#2063+ )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.)+ ,.PIECEWISE_BEZIER_KNOTS.);+#2060 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#2061 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#2062 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#2063 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2064 = DEFINITIONAL_REPRESENTATION('',(#2065),#2069);+#2065 = LINE('',#2066,#2067);+#2066 = CARTESIAN_POINT('',(4.791761211492E-17,-5.355652820008E-17));+#2067 = VECTOR('',#2068,1.);+#2068 = DIRECTION('',(1.,-1.674891034764E-19));+#2069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2070 = ADVANCED_FACE('',(#2071),#2059,.F.);+#2071 = FACE_BOUND('',#2072,.F.);+#2072 = EDGE_LOOP('',(#2073,#2074,#2096,#2123));+#2073 = ORIENTED_EDGE('',*,*,#2045,.T.);+#2074 = ORIENTED_EDGE('',*,*,#2075,.T.);+#2075 = EDGE_CURVE('',#2018,#2076,#2078,.T.);+#2076 = VERTEX_POINT('',#2077);+#2077 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2078 = SURFACE_CURVE('',#2079,(#2082,#2089),.PCURVE_S1.);+#2079 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2080,#2081),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2080 = CARTESIAN_POINT('',(0.6925,-1.425,0.9));+#2081 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2082 = PCURVE('',#2059,#2083);+#2083 = DEFINITIONAL_REPRESENTATION('',(#2084),#2088);+#2084 = LINE('',#2085,#2086);+#2085 = CARTESIAN_POINT('',(0.116672618896,-2.030544446125E-16));+#2086 = VECTOR('',#2087,1.);+#2087 = DIRECTION('',(-5.551115123126E-17,1.));+#2088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2089 = PCURVE('',#2033,#2090);+#2090 = DEFINITIONAL_REPRESENTATION('',(#2091),#2095);+#2091 = LINE('',#2092,#2093);+#2092 = CARTESIAN_POINT('',(2.172828727272E-17,-2.020161006056E-17));+#2093 = VECTOR('',#2094,1.);+#2094 = DIRECTION('',(-1.455904003942E-16,1.));+#2095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2096 = ORIENTED_EDGE('',*,*,#2097,.F.);+#2097 = EDGE_CURVE('',#2098,#2076,#2100,.T.);+#2098 = VERTEX_POINT('',#2099);+#2099 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#2100 = SURFACE_CURVE('',#2101,(#2105,#2111),.PCURVE_S1.);+#2101 = LINE('',#2102,#2103);+#2102 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#2103 = VECTOR('',#2104,1.);+#2104 = DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#2105 = PCURVE('',#2059,#2106);+#2106 = DEFINITIONAL_REPRESENTATION('',(#2107),#2110);+#2107 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2108,#2109),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,5.207732368117E-02),.PIECEWISE_BEZIER_KNOTS.);+#2108 = CARTESIAN_POINT('',(5.637459626905E-17,1.));+#2109 = CARTESIAN_POINT('',(0.116672618896,1.));+#2110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2111 = PCURVE('',#2112,#2117);+#2112 = PLANE('',#2113);+#2113 = AXIS2_PLACEMENT_3D('',#2114,#2115,#2116);+#2114 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#2115 = DIRECTION('',(0.,0.,1.));+#2116 = DIRECTION('',(0.436386464522,-0.899759330922,0.));+#2117 = DEFINITIONAL_REPRESENTATION('',(#2118),#2122);+#2118 = LINE('',#2119,#2120);+#2119 = CARTESIAN_POINT('',(2.947392615772,4.92025383766E-02));+#2120 = VECTOR('',#2121,1.);+#2121 = DIRECTION('',(0.327654096049,-0.944797752613));+#2122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2123 = ORIENTED_EDGE('',*,*,#2124,.F.);+#2124 = EDGE_CURVE('',#1850,#2098,#2125,.T.);+#2125 = SURFACE_CURVE('',#2126,(#2129,#2136),.PCURVE_S1.);+#2126 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2127,#2128),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2127 = CARTESIAN_POINT('',(0.775,-1.3425,0.9));+#2128 = CARTESIAN_POINT('',(0.683648457443,-1.296824228722,1.55));+#2129 = PCURVE('',#2059,#2130);+#2130 = DEFINITIONAL_REPRESENTATION('',(#2131),#2135);+#2131 = LINE('',#2132,#2133);+#2132 = CARTESIAN_POINT('',(4.791761211492E-17,-5.355652820008E-17));+#2133 = VECTOR('',#2134,1.);+#2134 = DIRECTION('',(8.45698415413E-18,1.));+#2135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2136 = PCURVE('',#1865,#2137);+#2137 = DEFINITIONAL_REPRESENTATION('',(#2138),#2142);+#2138 = LINE('',#2139,#2140);+#2139 = CARTESIAN_POINT('',(2.685,-1.078724937203E-16));+#2140 = VECTOR('',#2141,1.);+#2141 = DIRECTION('',(0.,1.));+#2142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2143 = ADVANCED_FACE('',(#2144,#2559,#2849,#3832,#4554,#5312,#6070,+ #7089,#7316,#7705),#2112,.T.);+#2144 = FACE_BOUND('',#2145,.T.);+#2145 = EDGE_LOOP('',(#2146,#2170,#2192,#2214,#2241,#2268,#2295,#2317,+ #2339,#2359,#2360,#2382,#2409,#2436,#2463,#2490,#2517,#2539));+#2146 = ORIENTED_EDGE('',*,*,#2147,.F.);+#2147 = EDGE_CURVE('',#2148,#2150,#2152,.T.);+#2148 = VERTEX_POINT('',#2149);+#2149 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#2150 = VERTEX_POINT('',#2151);+#2151 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#2152 = SURFACE_CURVE('',#2153,(#2157,#2164),.PCURVE_S1.);+#2153 = LINE('',#2154,#2155);+#2154 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#2155 = VECTOR('',#2156,1.);+#2156 = DIRECTION('',(1.,1.110223024625E-16,0.));+#2157 = PCURVE('',#2112,#2158);+#2158 = DEFINITIONAL_REPRESENTATION('',(#2159),#2163);+#2159 = LINE('',#2160,#2161);+#2160 = CARTESIAN_POINT('',(0.,0.));+#2161 = VECTOR('',#2162,1.);+#2162 = DIRECTION('',(0.436386464522,0.899759330922));+#2163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2164 = PCURVE('',#1921,#2165);+#2165 = DEFINITIONAL_REPRESENTATION('',(#2166),#2169);+#2166 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2167,#2168),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.293648457444),.PIECEWISE_BEZIER_KNOTS.);+#2167 = CARTESIAN_POINT('',(-4.999922991079E-18,1.));+#2168 = CARTESIAN_POINT('',(1.385,1.));+#2169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2170 = ORIENTED_EDGE('',*,*,#2171,.F.);+#2171 = EDGE_CURVE('',#2172,#2148,#2174,.T.);+#2172 = VERTEX_POINT('',#2173);+#2173 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#2174 = SURFACE_CURVE('',#2175,(#2179,#2186),.PCURVE_S1.);+#2175 = LINE('',#2176,#2177);+#2176 = CARTESIAN_POINT('',(-0.683648457443,1.296824228722,1.55));+#2177 = VECTOR('',#2178,1.);+#2178 = DIRECTION('',(0.707106781187,0.707106781187,0.));+#2179 = PCURVE('',#2112,#2180);+#2180 = DEFINITIONAL_REPRESENTATION('',(#2181),#2185);+#2181 = LINE('',#2182,#2183);+#2182 = CARTESIAN_POINT('',(1.706334841543E-02,-4.920253837605E-02));+#2183 = VECTOR('',#2184,1.);+#2184 = DIRECTION('',(-0.327654096049,0.944797752613));+#2185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2186 = PCURVE('',#1949,#2187);+#2187 = DEFINITIONAL_REPRESENTATION('',(#2188),#2191);+#2188 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2189,#2190),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,5.207732368117E-02),.PIECEWISE_BEZIER_KNOTS.);+#2189 = CARTESIAN_POINT('',(5.637459626905E-17,1.));+#2190 = CARTESIAN_POINT('',(0.116672618896,1.));+#2191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2192 = ORIENTED_EDGE('',*,*,#2193,.F.);+#2193 = EDGE_CURVE('',#2194,#2172,#2196,.T.);+#2194 = VERTEX_POINT('',#2195);+#2195 = CARTESIAN_POINT('',(-0.683648457443,8.932291666667E-02,1.55));+#2196 = SURFACE_CURVE('',#2197,(#2201,#2208),.PCURVE_S1.);+#2197 = LINE('',#2198,#2199);+#2198 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#2199 = VECTOR('',#2200,1.);+#2200 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2201 = PCURVE('',#2112,#2202);+#2202 = DEFINITIONAL_REPRESENTATION('',(#2203),#2207);+#2203 = LINE('',#2204,#2205);+#2204 = CARTESIAN_POINT('',(2.350722749133,-1.181035618933));+#2205 = VECTOR('',#2206,1.);+#2206 = DIRECTION('',(-0.899759330922,0.436386464522));+#2207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2208 = PCURVE('',#1977,#2209);+#2209 = DEFINITIONAL_REPRESENTATION('',(#2210),#2213);+#2210 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2211,#2212),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,2.593648457444),.PIECEWISE_BEZIER_KNOTS.);+#2211 = CARTESIAN_POINT('',(-2.551722279926E-17,1.));+#2212 = CARTESIAN_POINT('',(2.685,1.));+#2213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2214 = ORIENTED_EDGE('',*,*,#2215,.T.);+#2215 = EDGE_CURVE('',#2194,#2216,#2218,.T.);+#2216 = VERTEX_POINT('',#2217);+#2217 = CARTESIAN_POINT('',(-0.637508138021,8.932291666667E-02,1.55));+#2218 = SURFACE_CURVE('',#2219,(#2223,#2230),.PCURVE_S1.);+#2219 = LINE('',#2220,#2221);+#2220 = CARTESIAN_POINT('',(-0.707050623476,8.932291666667E-02,1.55));+#2221 = VECTOR('',#2222,1.);+#2222 = DIRECTION('',(1.,0.,-0.));+#2223 = PCURVE('',#2112,#2224);+#2224 = DEFINITIONAL_REPRESENTATION('',(#2225),#2229);+#2225 = LINE('',#2226,#2227);+#2226 = CARTESIAN_POINT('',(1.093311532541,-0.597196084101));+#2227 = VECTOR('',#2228,1.);+#2228 = DIRECTION('',(0.436386464522,0.899759330922));+#2229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2230 = PCURVE('',#2231,#2236);+#2231 = PLANE('',#2232);+#2232 = AXIS2_PLACEMENT_3D('',#2233,#2234,#2235);+#2233 = CARTESIAN_POINT('',(-0.767277018229,8.932291666667E-02,1.6000001+ ));+#2234 = DIRECTION('',(0.,-1.,0.));+#2235 = DIRECTION('',(1.,0.,0.));+#2236 = DEFINITIONAL_REPRESENTATION('',(#2237),#2240);+#2237 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2238,#2239),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-6.022639475358E-02,6.954248545475E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#2238 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2239 = CARTESIAN_POINT('',(0.129768880208,-5.00001E-02));+#2240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2241 = ORIENTED_EDGE('',*,*,#2242,.T.);+#2242 = EDGE_CURVE('',#2216,#2243,#2245,.T.);+#2243 = VERTEX_POINT('',#2244);+#2244 = CARTESIAN_POINT('',(-0.637508138021,6.995442708333E-02,1.55));+#2245 = SURFACE_CURVE('',#2246,(#2250,#2257),.PCURVE_S1.);+#2246 = LINE('',#2247,#2248);+#2247 = CARTESIAN_POINT('',(-0.637508138021,0.711485687055,1.55));+#2248 = VECTOR('',#2249,1.);+#2249 = DIRECTION('',(0.,-1.,0.));+#2250 = PCURVE('',#2112,#2251);+#2251 = DEFINITIONAL_REPRESENTATION('',(#2252),#2256);+#2252 = LINE('',#2253,#2254);+#2253 = CARTESIAN_POINT('',(0.563862173894,-0.263121172191));+#2254 = VECTOR('',#2255,1.);+#2255 = DIRECTION('',(0.899759330922,-0.436386464522));+#2256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2257 = PCURVE('',#2258,#2263);+#2258 = PLANE('',#2259);+#2259 = AXIS2_PLACEMENT_3D('',#2260,#2261,#2262);+#2260 = CARTESIAN_POINT('',(-0.637508138021,8.932291666667E-02,1.6000001+ ));+#2261 = DIRECTION('',(-1.,0.,0.));+#2262 = DIRECTION('',(0.,-1.,0.));+#2263 = DEFINITIONAL_REPRESENTATION('',(#2264),#2267);+#2264 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2265,#2266),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.622162770388,0.641531259971),.PIECEWISE_BEZIER_KNOTS.);+#2265 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2266 = CARTESIAN_POINT('',(1.936848958333E-02,-5.00001E-02));+#2267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2268 = ORIENTED_EDGE('',*,*,#2269,.T.);+#2269 = EDGE_CURVE('',#2243,#2270,#2272,.T.);+#2270 = VERTEX_POINT('',#2271);+#2271 = CARTESIAN_POINT('',(-0.683648457443,6.995442708333E-02,1.55));+#2272 = SURFACE_CURVE('',#2273,(#2277,#2284),.PCURVE_S1.);+#2273 = LINE('',#2274,#2275);+#2274 = CARTESIAN_POINT('',(-0.642166183371,6.995442708333E-02,1.55));+#2275 = VECTOR('',#2276,1.);+#2276 = DIRECTION('',(-1.,0.,0.));+#2277 = PCURVE('',#2112,#2278);+#2278 = DEFINITIONAL_REPRESENTATION('',(#2279),#2283);+#2279 = LINE('',#2280,#2281);+#2280 = CARTESIAN_POINT('',(1.139053203189,-0.547267850378));+#2281 = VECTOR('',#2282,1.);+#2282 = DIRECTION('',(-0.436386464522,-0.899759330922));+#2283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2284 = PCURVE('',#2285,#2290);+#2285 = PLANE('',#2286);+#2286 = AXIS2_PLACEMENT_3D('',#2287,#2288,#2289);+#2287 = CARTESIAN_POINT('',(-0.637508138021,6.995442708333E-02,1.6000001+ ));+#2288 = DIRECTION('',(0.,1.,0.));+#2289 = DIRECTION('',(-1.,0.,0.));+#2290 = DEFINITIONAL_REPRESENTATION('',(#2291),#2294);+#2291 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2292,#2293),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-4.658045350583E-03,4.854833485775E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#2292 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2293 = CARTESIAN_POINT('',(5.320638020833E-02,-5.00001E-02));+#2294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2295 = ORIENTED_EDGE('',*,*,#2296,.F.);+#2296 = EDGE_CURVE('',#2297,#2270,#2299,.T.);+#2297 = VERTEX_POINT('',#2298);+#2298 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#2299 = SURFACE_CURVE('',#2300,(#2304,#2311),.PCURVE_S1.);+#2300 = LINE('',#2301,#2302);+#2301 = CARTESIAN_POINT('',(-0.683648457443,-1.296824228722,1.55));+#2302 = VECTOR('',#2303,1.);+#2303 = DIRECTION('',(-1.110223024625E-16,1.,0.));+#2304 = PCURVE('',#2112,#2305);+#2305 = DEFINITIONAL_REPRESENTATION('',(#2306),#2310);+#2306 = LINE('',#2307,#2308);+#2307 = CARTESIAN_POINT('',(2.350722749133,-1.181035618933));+#2308 = VECTOR('',#2309,1.);+#2309 = DIRECTION('',(-0.899759330922,0.436386464522));+#2310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2311 = PCURVE('',#1977,#2312);+#2312 = DEFINITIONAL_REPRESENTATION('',(#2313),#2316);+#2313 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2314,#2315),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,2.593648457444),.PIECEWISE_BEZIER_KNOTS.);+#2314 = CARTESIAN_POINT('',(-2.551722279926E-17,1.));+#2315 = CARTESIAN_POINT('',(2.685,1.));+#2316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2317 = ORIENTED_EDGE('',*,*,#2318,.F.);+#2318 = EDGE_CURVE('',#2319,#2297,#2321,.T.);+#2319 = VERTEX_POINT('',#2320);+#2320 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2321 = SURFACE_CURVE('',#2322,(#2326,#2333),.PCURVE_S1.);+#2322 = LINE('',#2323,#2324);+#2323 = CARTESIAN_POINT('',(-0.646824228722,-1.333648457443,1.55));+#2324 = VECTOR('',#2325,1.);+#2325 = DIRECTION('',(-0.707106781187,0.707106781187,0.));+#2326 = PCURVE('',#2112,#2327);+#2327 = DEFINITIONAL_REPRESENTATION('',(#2328),#2332);+#2328 = LINE('',#2329,#2330);+#2329 = CARTESIAN_POINT('',(2.399925287509,-1.163972270518));+#2330 = VECTOR('',#2331,1.);+#2331 = DIRECTION('',(-0.944797752613,-0.327654096049));+#2332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2333 = PCURVE('',#2005,#2334);+#2334 = DEFINITIONAL_REPRESENTATION('',(#2335),#2338);+#2335 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2336,#2337),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,5.207732368117E-02),.PIECEWISE_BEZIER_KNOTS.);+#2336 = CARTESIAN_POINT('',(-1.206891714386E-16,1.));+#2337 = CARTESIAN_POINT('',(0.116672618896,1.));+#2338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2339 = ORIENTED_EDGE('',*,*,#2340,.F.);+#2340 = EDGE_CURVE('',#2076,#2319,#2341,.T.);+#2341 = SURFACE_CURVE('',#2342,(#2346,#2353),.PCURVE_S1.);+#2342 = LINE('',#2343,#2344);+#2343 = CARTESIAN_POINT('',(0.646824228722,-1.333648457443,1.55));+#2344 = VECTOR('',#2345,1.);+#2345 = DIRECTION('',(-1.,-1.110223024625E-16,0.));+#2346 = PCURVE('',#2112,#2347);+#2347 = DEFINITIONAL_REPRESENTATION('',(#2348),#2352);+#2348 = LINE('',#2349,#2350);+#2349 = CARTESIAN_POINT('',(2.964455964188,5.511147094239E-13));+#2350 = VECTOR('',#2351,1.);+#2351 = DIRECTION('',(-0.436386464522,-0.899759330922));+#2352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2353 = PCURVE('',#2033,#2354);+#2354 = DEFINITIONAL_REPRESENTATION('',(#2355),#2358);+#2355 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2356,#2357),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,1.293648457444),.PIECEWISE_BEZIER_KNOTS.);+#2356 = CARTESIAN_POINT('',(-4.999922991079E-18,1.));+#2357 = CARTESIAN_POINT('',(1.385,1.));+#2358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2359 = ORIENTED_EDGE('',*,*,#2097,.F.);+#2360 = ORIENTED_EDGE('',*,*,#2361,.F.);+#2361 = EDGE_CURVE('',#2362,#2098,#2364,.T.);+#2362 = VERTEX_POINT('',#2363);+#2363 = CARTESIAN_POINT('',(0.683648457443,-8.88671875E-03,1.55));+#2364 = SURFACE_CURVE('',#2365,(#2369,#2376),.PCURVE_S1.);+#2365 = LINE('',#2366,#2367);+#2366 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#2367 = VECTOR('',#2368,1.);+#2368 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2369 = PCURVE('',#2112,#2370);+#2370 = DEFINITIONAL_REPRESENTATION('',(#2371),#2375);+#2371 = LINE('',#2372,#2373);+#2372 = CARTESIAN_POINT('',(0.613733215055,1.181035618934));+#2373 = VECTOR('',#2374,1.);+#2374 = DIRECTION('',(0.899759330922,-0.436386464522));+#2375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2376 = PCURVE('',#1865,#2377);+#2377 = DEFINITIONAL_REPRESENTATION('',(#2378),#2381);+#2378 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2379,#2380),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,2.593648457444),.PIECEWISE_BEZIER_KNOTS.);+#2379 = CARTESIAN_POINT('',(-2.551722279926E-17,1.));+#2380 = CARTESIAN_POINT('',(2.685,1.));+#2381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2382 = ORIENTED_EDGE('',*,*,#2383,.T.);+#2383 = EDGE_CURVE('',#2362,#2384,#2386,.T.);+#2384 = VERTEX_POINT('',#2385);+#2385 = CARTESIAN_POINT('',(0.671573893229,-8.88671875E-03,1.55));+#2386 = SURFACE_CURVE('',#2387,(#2391,#2398),.PCURVE_S1.);+#2387 = LINE('',#2388,#2389);+#2388 = CARTESIAN_POINT('',(2.336929839942E-02,-8.88671875E-03,1.55));+#2389 = VECTOR('',#2390,1.);+#2390 = DIRECTION('',(-1.,0.,0.));+#2391 = PCURVE('',#2112,#2392);+#2392 = DEFINITIONAL_REPRESENTATION('',(#2393),#2397);+#2393 = LINE('',#2394,#2395);+#2394 = CARTESIAN_POINT('',(1.500421935717,1.714870051574E-02));+#2395 = VECTOR('',#2396,1.);+#2396 = DIRECTION('',(-0.436386464522,-0.899759330922));+#2397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2398 = PCURVE('',#2399,#2404);+#2399 = PLANE('',#2400);+#2400 = AXIS2_PLACEMENT_3D('',#2401,#2402,#2403);+#2401 = CARTESIAN_POINT('',(0.693562825521,-8.88671875E-03,1.6000001));+#2402 = DIRECTION('',(0.,1.,0.));+#2403 = DIRECTION('',(-1.,0.,0.));+#2404 = DEFINITIONAL_REPRESENTATION('',(#2405),#2408);+#2405 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2406,#2407),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.670193527121,-0.64820459483),.PIECEWISE_BEZIER_KNOTS.);+#2406 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2407 = CARTESIAN_POINT('',(2.198893229167E-02,-5.00001E-02));+#2408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2409 = ORIENTED_EDGE('',*,*,#2410,.T.);+#2410 = EDGE_CURVE('',#2384,#2411,#2413,.T.);+#2411 = VERTEX_POINT('',#2412);+#2412 = CARTESIAN_POINT('',(0.671573893229,-8.077799479167E-02,1.55));+#2413 = SURFACE_CURVE('',#2414,(#2418,#2425),.PCURVE_S1.);+#2414 = LINE('',#2415,#2416);+#2415 = CARTESIAN_POINT('',(0.671573893229,0.662380869347,1.55));+#2416 = VECTOR('',#2417,1.);+#2417 = DIRECTION('',(0.,-1.,0.));+#2418 = PCURVE('',#2112,#2419);+#2419 = DEFINITIONAL_REPRESENTATION('',(#2420),#2424);+#2420 = LINE('',#2421,#2422);+#2421 = CARTESIAN_POINT('',(1.179310371207,0.893308922578));+#2422 = VECTOR('',#2423,1.);+#2423 = DIRECTION('',(0.899759330922,-0.436386464522));+#2424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2425 = PCURVE('',#2426,#2431);+#2426 = PLANE('',#2427);+#2427 = AXIS2_PLACEMENT_3D('',#2428,#2429,#2430);+#2428 = CARTESIAN_POINT('',(0.671573893229,-8.88671875E-03,1.6000001));+#2429 = DIRECTION('',(-1.,0.,0.));+#2430 = DIRECTION('',(0.,-1.,0.));+#2431 = DEFINITIONAL_REPRESENTATION('',(#2432),#2435);+#2432 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2433,#2434),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.671267588097,0.743158864138),.PIECEWISE_BEZIER_KNOTS.);+#2433 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2434 = CARTESIAN_POINT('',(7.189127604167E-02,-5.00001E-02));+#2435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2436 = ORIENTED_EDGE('',*,*,#2437,.T.);+#2437 = EDGE_CURVE('',#2411,#2438,#2440,.T.);+#2438 = VERTEX_POINT('',#2439);+#2439 = CARTESIAN_POINT('',(0.648445638021,-8.077799479167E-02,1.55));+#2440 = SURFACE_CURVE('',#2441,(#2445,#2452),.PCURVE_S1.);+#2441 = LINE('',#2442,#2443);+#2442 = CARTESIAN_POINT('',(1.237483225358E-02,-8.077799479167E-02,1.55)+ );+#2443 = VECTOR('',#2444,1.);+#2444 = DIRECTION('',(-1.,0.,0.));+#2445 = PCURVE('',#2112,#2446);+#2446 = DEFINITIONAL_REPRESENTATION('',(#2447),#2451);+#2447 = LINE('',#2448,#2449);+#2448 = CARTESIAN_POINT('',(1.560308945937,-2.411605276929E-02));+#2449 = VECTOR('',#2450,1.);+#2450 = DIRECTION('',(-0.436386464522,-0.899759330922));+#2451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2452 = PCURVE('',#2453,#2458);+#2453 = PLANE('',#2454);+#2454 = AXIS2_PLACEMENT_3D('',#2455,#2456,#2457);+#2455 = CARTESIAN_POINT('',(0.671573893229,-8.077799479167E-02,1.6000001+ ));+#2456 = DIRECTION('',(0.,1.,0.));+#2457 = DIRECTION('',(-1.,0.,0.));+#2458 = DEFINITIONAL_REPRESENTATION('',(#2459),#2462);+#2459 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2460,#2461),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.659199060976,-0.636070805767),.PIECEWISE_BEZIER_KNOTS.);+#2460 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2461 = CARTESIAN_POINT('',(2.312825520833E-02,-5.00001E-02));+#2462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2463 = ORIENTED_EDGE('',*,*,#2464,.T.);+#2464 = EDGE_CURVE('',#2438,#2465,#2467,.T.);+#2465 = VERTEX_POINT('',#2466);+#2466 = CARTESIAN_POINT('',(0.648445638021,8.932291666667E-02,1.55));+#2467 = SURFACE_CURVE('',#2468,(#2472,#2479),.PCURVE_S1.);+#2468 = LINE('',#2469,#2470);+#2469 = CARTESIAN_POINT('',(0.648445638021,0.626435231326,1.55));+#2470 = VECTOR('',#2471,1.);+#2471 = DIRECTION('',(0.,1.,0.));+#2472 = PCURVE('',#2112,#2473);+#2473 = DEFINITIONAL_REPRESENTATION('',(#2474),#2478);+#2474 = LINE('',#2475,#2476);+#2475 = CARTESIAN_POINT('',(1.201559936901,0.856812869256));+#2476 = VECTOR('',#2477,1.);+#2477 = DIRECTION('',(-0.899759330922,0.436386464522));+#2478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2479 = PCURVE('',#2480,#2485);+#2480 = PLANE('',#2481);+#2481 = AXIS2_PLACEMENT_3D('',#2482,#2483,#2484);+#2482 = CARTESIAN_POINT('',(0.648445638021,-8.077799479167E-02,1.6000001+ ));+#2483 = DIRECTION('',(1.,0.,0.));+#2484 = DIRECTION('',(0.,1.,0.));+#2485 = DEFINITIONAL_REPRESENTATION('',(#2486),#2489);+#2486 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2487,#2488),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707213226117,-0.537112314659),.PIECEWISE_BEZIER_KNOTS.);+#2487 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2488 = CARTESIAN_POINT('',(0.170100911458,-5.00001E-02));+#2489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2490 = ORIENTED_EDGE('',*,*,#2491,.T.);+#2491 = EDGE_CURVE('',#2465,#2492,#2494,.T.);+#2492 = VERTEX_POINT('',#2493);+#2493 = CARTESIAN_POINT('',(0.683648457443,8.932291666667E-02,1.55));+#2494 = SURFACE_CURVE('',#2495,(#2499,#2506),.PCURVE_S1.);+#2495 = LINE('',#2496,#2497);+#2496 = CARTESIAN_POINT('',(8.107046494167E-04,8.932291666667E-02,1.55)+ );+#2497 = VECTOR('',#2498,1.);+#2498 = DIRECTION('',(1.,0.,-0.));+#2499 = PCURVE('',#2112,#2500);+#2500 = DEFINITIONAL_REPRESENTATION('',(#2501),#2505);+#2501 = LINE('',#2502,#2503);+#2502 = CARTESIAN_POINT('',(1.402212634894,3.970875087819E-02));+#2503 = VECTOR('',#2504,1.);+#2504 = DIRECTION('',(0.436386464522,0.899759330922));+#2505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2506 = PCURVE('',#2507,#2512);+#2507 = PLANE('',#2508);+#2508 = AXIS2_PLACEMENT_3D('',#2509,#2510,#2511);+#2509 = CARTESIAN_POINT('',(0.648445638021,8.932291666667E-02,1.6000001)+ );+#2510 = DIRECTION('',(0.,-1.,0.));+#2511 = DIRECTION('',(1.,0.,0.));+#2512 = DEFINITIONAL_REPRESENTATION('',(#2513),#2516);+#2513 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2514,#2515),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.647634933371,0.695030766705),.PIECEWISE_BEZIER_KNOTS.);+#2514 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2515 = CARTESIAN_POINT('',(4.739583333333E-02,-5.00001E-02));+#2516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2517 = ORIENTED_EDGE('',*,*,#2518,.F.);+#2518 = EDGE_CURVE('',#2519,#2492,#2521,.T.);+#2519 = VERTEX_POINT('',#2520);+#2520 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#2521 = SURFACE_CURVE('',#2522,(#2526,#2533),.PCURVE_S1.);+#2522 = LINE('',#2523,#2524);+#2523 = CARTESIAN_POINT('',(0.683648457443,1.296824228722,1.55));+#2524 = VECTOR('',#2525,1.);+#2525 = DIRECTION('',(1.110223024625E-16,-1.,0.));+#2526 = PCURVE('',#2112,#2527);+#2527 = DEFINITIONAL_REPRESENTATION('',(#2528),#2532);+#2528 = LINE('',#2529,#2530);+#2529 = CARTESIAN_POINT('',(0.613733215055,1.181035618934));+#2530 = VECTOR('',#2531,1.);+#2531 = DIRECTION('',(0.899759330922,-0.436386464522));+#2532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2533 = PCURVE('',#1865,#2534);+#2534 = DEFINITIONAL_REPRESENTATION('',(#2535),#2538);+#2535 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2536,#2537),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,2.593648457444),.PIECEWISE_BEZIER_KNOTS.);+#2536 = CARTESIAN_POINT('',(-2.551722279926E-17,1.));+#2537 = CARTESIAN_POINT('',(2.685,1.));+#2538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2539 = ORIENTED_EDGE('',*,*,#2540,.F.);+#2540 = EDGE_CURVE('',#2150,#2519,#2541,.T.);+#2541 = SURFACE_CURVE('',#2542,(#2546,#2553),.PCURVE_S1.);+#2542 = LINE('',#2543,#2544);+#2543 = CARTESIAN_POINT('',(0.646824228722,1.333648457443,1.55));+#2544 = VECTOR('',#2545,1.);+#2545 = DIRECTION('',(0.707106781187,-0.707106781187,0.));+#2546 = PCURVE('',#2112,#2547);+#2547 = DEFINITIONAL_REPRESENTATION('',(#2548),#2552);+#2548 = LINE('',#2549,#2550);+#2549 = CARTESIAN_POINT('',(0.564530676679,1.163972270519));+#2550 = VECTOR('',#2551,1.);+#2551 = DIRECTION('',(0.944797752613,0.327654096049));+#2552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2553 = PCURVE('',#1893,#2554);+#2554 = DEFINITIONAL_REPRESENTATION('',(#2555),#2558);+#2555 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2556,#2557),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.,5.207732368117E-02),.PIECEWISE_BEZIER_KNOTS.);+#2556 = CARTESIAN_POINT('',(-1.206891714386E-16,1.));+#2557 = CARTESIAN_POINT('',(0.116672618896,1.));+#2558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2559 = FACE_BOUND('',#2560,.T.);+#2560 = EDGE_LOOP('',(#2561,#2590,#2617,#2644,#2680,#2716,#2761,#2797,+ #2824));+#2561 = ORIENTED_EDGE('',*,*,#2562,.T.);+#2562 = EDGE_CURVE('',#2563,#2565,#2567,.T.);+#2563 = VERTEX_POINT('',#2564);+#2564 = CARTESIAN_POINT('',(-0.586694335938,-8.077799479167E-02,1.55));+#2565 = VERTEX_POINT('',#2566);+#2566 = CARTESIAN_POINT('',(-0.609708658854,-8.077799479167E-02,1.55));+#2567 = SURFACE_CURVE('',#2568,(#2572,#2579),.PCURVE_S1.);+#2568 = LINE('',#2569,#2570);+#2569 = CARTESIAN_POINT('',(-0.61675928233,-8.077799479167E-02,1.55));+#2570 = VECTOR('',#2571,1.);+#2571 = DIRECTION('',(-1.,0.,0.));+#2572 = PCURVE('',#2112,#2573);+#2573 = DEFINITIONAL_REPRESENTATION('',(#2574),#2578);+#2574 = LINE('',#2575,#2576);+#2575 = CARTESIAN_POINT('',(1.285763333964,-0.590185342767));+#2576 = VECTOR('',#2577,1.);+#2577 = DIRECTION('',(-0.436386464522,-0.899759330922));+#2578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2579 = PCURVE('',#2580,#2585);+#2580 = PLANE('',#2581);+#2581 = AXIS2_PLACEMENT_3D('',#2582,#2583,#2584);+#2582 = CARTESIAN_POINT('',(-0.586694335938,-8.077799479167E-02,+ 1.6000001));+#2583 = DIRECTION('',(0.,1.,0.));+#2584 = DIRECTION('',(-1.,0.,0.));+#2585 = DEFINITIONAL_REPRESENTATION('',(#2586),#2589);+#2586 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2587,#2588),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-3.006494639225E-02,-7.050623475583E-03),+ .PIECEWISE_BEZIER_KNOTS.);+#2587 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2588 = CARTESIAN_POINT('',(2.301432291667E-02,-5.00001E-02));+#2589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2590 = ORIENTED_EDGE('',*,*,#2591,.T.);+#2591 = EDGE_CURVE('',#2565,#2592,#2594,.T.);+#2592 = VERTEX_POINT('',#2593);+#2593 = CARTESIAN_POINT('',(-0.609708658854,8.932291666667E-02,1.55));+#2594 = SURFACE_CURVE('',#2595,(#2599,#2606),.PCURVE_S1.);+#2595 = LINE('',#2596,#2597);+#2596 = CARTESIAN_POINT('',(-0.609708658854,0.626435231326,1.55));+#2597 = VECTOR('',#2598,1.);+#2598 = DIRECTION('',(0.,1.,0.));+#2599 = PCURVE('',#2112,#2600);+#2600 = DEFINITIONAL_REPRESENTATION('',(#2601),#2605);+#2601 = LINE('',#2602,#2603);+#2602 = CARTESIAN_POINT('',(0.652518431464,-0.275223199098));+#2603 = VECTOR('',#2604,1.);+#2604 = DIRECTION('',(-0.899759330922,0.436386464522));+#2605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2606 = PCURVE('',#2607,#2612);+#2607 = PLANE('',#2608);+#2608 = AXIS2_PLACEMENT_3D('',#2609,#2610,#2611);+#2609 = CARTESIAN_POINT('',(-0.609708658854,-8.077799479167E-02,+ 1.6000001));+#2610 = DIRECTION('',(1.,0.,0.));+#2611 = DIRECTION('',(0.,1.,0.));+#2612 = DEFINITIONAL_REPRESENTATION('',(#2613),#2616);+#2613 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2614,#2615),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707213226117,-0.537112314659),.PIECEWISE_BEZIER_KNOTS.);+#2614 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2615 = CARTESIAN_POINT('',(0.170100911458,-5.00001E-02));+#2616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2617 = ORIENTED_EDGE('',*,*,#2618,.T.);+#2618 = EDGE_CURVE('',#2592,#2619,#2621,.T.);+#2619 = VERTEX_POINT('',#2620);+#2620 = CARTESIAN_POINT('',(-0.560034179688,8.932291666667E-02,1.55));+#2621 = SURFACE_CURVE('',#2622,(#2626,#2633),.PCURVE_S1.);+#2622 = LINE('',#2623,#2624);+#2623 = CARTESIAN_POINT('',(-0.628266443788,8.932291666667E-02,1.55));+#2624 = VECTOR('',#2625,1.);+#2625 = DIRECTION('',(1.,0.,-0.));+#2626 = PCURVE('',#2112,#2627);+#2627 = DEFINITIONAL_REPRESENTATION('',(#2628),#2632);+#2628 = LINE('',#2629,#2630);+#2629 = CARTESIAN_POINT('',(1.127691882175,-0.526309283298));+#2630 = VECTOR('',#2631,1.);+#2631 = DIRECTION('',(0.436386464522,0.899759330922));+#2632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2633 = PCURVE('',#2634,#2639);+#2634 = PLANE('',#2635);+#2635 = AXIS2_PLACEMENT_3D('',#2636,#2637,#2638);+#2636 = CARTESIAN_POINT('',(-0.609708658854,8.932291666667E-02,1.6000001+ ));+#2637 = DIRECTION('',(0.,-1.,0.));+#2638 = DIRECTION('',(1.,0.,0.));+#2639 = DEFINITIONAL_REPRESENTATION('',(#2640),#2643);+#2640 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2641,#2642),.UNSPECIFIED.,.F.,+ .F.,(2,2),(1.855778493392E-02,6.823226410058E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#2641 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2642 = CARTESIAN_POINT('',(4.967447916667E-02,-5.00001E-02));+#2643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2644 = ORIENTED_EDGE('',*,*,#2645,.F.);+#2645 = EDGE_CURVE('',#2646,#2619,#2648,.T.);+#2646 = VERTEX_POINT('',#2647);+#2647 = CARTESIAN_POINT('',(-0.516853841146,7.63916015625E-02,1.55));+#2648 = SURFACE_CURVE('',#2649,(#2655,#2664),.PCURVE_S1.);+#2649 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2650,#2651,#2652,#2653,#2654),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2650 = CARTESIAN_POINT('',(-0.516853841146,7.63916015625E-02,1.55));+#2651 = CARTESIAN_POINT('',(-0.524204740254,8.285925310335E-02,1.55));+#2652 = CARTESIAN_POINT('',(-0.533854347308,8.717005017696E-02,1.55));+#2653 = CARTESIAN_POINT('',(-0.545800413054,8.932291666667E-02,1.55));+#2654 = CARTESIAN_POINT('',(-0.560034179688,8.932291666667E-02,1.55));+#2655 = PCURVE('',#2112,#2656);+#2656 = DEFINITIONAL_REPRESENTATION('',(#2657),#2663);+#2657 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2658,#2659,#2660,#2661,#2662),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2658 = CARTESIAN_POINT('',(1.187945905372,-0.431707805369));+#2659 = CARTESIAN_POINT('',(1.178918742676,-0.435499449842));+#2660 = CARTESIAN_POINT('',(1.170829104879,-0.442300600335));+#2661 = CARTESIAN_POINT('',(1.16367894177,-0.452109702662));+#2662 = CARTESIAN_POINT('',(1.157467518672,-0.464916667004));+#2663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2664 = PCURVE('',#2665,#2672);+#2665 = SURFACE_OF_LINEAR_EXTRUSION('',#2666,#2670);+#2666 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2667,#2668,#2669),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2667 = CARTESIAN_POINT('',(-0.560034179688,8.932291666667E-02,1.6000001+ ));+#2668 = CARTESIAN_POINT('',(-0.531551106771,8.932291666667E-02,1.6000001+ ));+#2669 = CARTESIAN_POINT('',(-0.516853841146,7.63916015625E-02,1.6000001)+ );+#2670 = VECTOR('',#2671,1.);+#2671 = DIRECTION('',(0.,0.,1.));+#2672 = DEFINITIONAL_REPRESENTATION('',(#2673),#2679);+#2673 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2674,#2675,#2676,#2677,#2678),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2674 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2675 = CARTESIAN_POINT('',(0.749922900774,-5.00001E-02));+#2676 = CARTESIAN_POINT('',(0.499857561943,-5.00001E-02));+#2677 = CARTESIAN_POINT('',(0.249863606269,-5.00001E-02));+#2678 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2680 = ORIENTED_EDGE('',*,*,#2681,.F.);+#2681 = EDGE_CURVE('',#2682,#2646,#2684,.T.);+#2682 = VERTEX_POINT('',#2683);+#2683 = CARTESIAN_POINT('',(-0.502156575521,3.850911458333E-02,1.55));+#2684 = SURFACE_CURVE('',#2685,(#2691,#2700),.PCURVE_S1.);+#2685 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2686,#2687,#2688,#2689,#2690),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2686 = CARTESIAN_POINT('',(-0.502156575521,3.850911458333E-02,1.55));+#2687 = CARTESIAN_POINT('',(-0.502156575521,5.098022557964E-02,1.55));+#2688 = CARTESIAN_POINT('',(-0.504604361736,6.145443911169E-02,1.55));+#2689 = CARTESIAN_POINT('',(-0.509504334202,6.992517491025E-02,1.55));+#2690 = CARTESIAN_POINT('',(-0.516853841146,7.63916015625E-02,1.55));+#2691 = PCURVE('',#2112,#2692);+#2692 = DEFINITIONAL_REPRESENTATION('',(#2693),#2699);+#2693 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2694,#2695,#2696,#2697,#2698),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2694 = CARTESIAN_POINT('',(1.228444714294,-0.435015208044));+#2695 = CARTESIAN_POINT('',(1.217223715808,-0.429572984007));+#2696 = CARTESIAN_POINT('',(1.206731263676,-0.427204597483));+#2697 = CARTESIAN_POINT('',(1.196971358441,-0.427916878983));+#2698 = CARTESIAN_POINT('',(1.187945905372,-0.431707805369));+#2699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2700 = PCURVE('',#2701,#2708);+#2701 = SURFACE_OF_LINEAR_EXTRUSION('',#2702,#2706);+#2702 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2703,#2704,#2705),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2703 = CARTESIAN_POINT('',(-0.516853841146,7.63916015625E-02,1.6000001)+ );+#2704 = CARTESIAN_POINT('',(-0.502156575521,6.346028645833E-02,1.6000001+ ));+#2705 = CARTESIAN_POINT('',(-0.502156575521,3.850911458333E-02,1.6000001+ ));+#2706 = VECTOR('',#2707,1.);+#2707 = DIRECTION('',(0.,0.,1.));+#2708 = DEFINITIONAL_REPRESENTATION('',(#2709),#2715);+#2709 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2710,#2711,#2712,#2713,#2714),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2710 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2711 = CARTESIAN_POINT('',(0.750089673968,-5.00001E-02));+#2712 = CARTESIAN_POINT('',(0.500079669094,-5.00001E-02));+#2713 = CARTESIAN_POINT('',(0.250029737894,-5.00001E-02));+#2714 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2716 = ORIENTED_EDGE('',*,*,#2717,.F.);+#2717 = EDGE_CURVE('',#2718,#2682,#2720,.T.);+#2718 = VERTEX_POINT('',#2719);+#2719 = CARTESIAN_POINT('',(-0.516796875,4.557291666667E-04,1.55));+#2720 = SURFACE_CURVE('',#2721,(#2730,#2742),.PCURVE_S1.);+#2721 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2722,#2723,#2724,#2725,#2726,+ #2727,#2728,#2729),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.153977953633,+ 1.),.UNSPECIFIED.);+#2722 = CARTESIAN_POINT('',(-0.516796875,4.557291666667E-04,1.55));+#2723 = CARTESIAN_POINT('',(-0.515669584819,1.447042711052E-03,1.55));+#2724 = CARTESIAN_POINT('',(-0.514600148615,2.487002838131E-03,1.55));+#2725 = CARTESIAN_POINT('',(-0.513588575881,3.575606334243E-03,1.55));+#2726 = CARTESIAN_POINT('',(-0.507394807518,1.096134080795E-02,1.55));+#2727 = CARTESIAN_POINT('',(-0.503901739253,1.86781234163E-02,1.55));+#2728 = CARTESIAN_POINT('',(-0.502156575521,2.78620982236E-02,1.55));+#2729 = CARTESIAN_POINT('',(-0.502156575521,3.850911458333E-02,1.55));+#2730 = PCURVE('',#2112,#2731);+#2731 = DEFINITIONAL_REPRESENTATION('',(#2732),#2741);+#2732 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2733,#2734,#2735,#2736,#2737,+ #2738,#2739,#2740),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.153977953633,+ 1.),.UNSPECIFIED.);+#2733 = CARTESIAN_POINT('',(1.256294774366,-0.464793936433));+#2734 = CARTESIAN_POINT('',(1.255894764932,-0.463347050761));+#2735 = CARTESIAN_POINT('',(1.255425738588,-0.461930991034));+#2736 = CARTESIAN_POINT('',(1.254887694083,-0.460545767197));+#2737 = CARTESIAN_POINT('',(1.250945187253,-0.451749831764));+#2738 = CARTESIAN_POINT('',(1.245526267807,-0.445239411519));+#2739 = CARTESIAN_POINT('',(1.23802446661,-0.439661421871));+#2740 = CARTESIAN_POINT('',(1.228444714294,-0.435015208044));+#2741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2742 = PCURVE('',#2743,#2750);+#2743 = SURFACE_OF_LINEAR_EXTRUSION('',#2744,#2748);+#2744 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2745,#2746,#2747),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2745 = CARTESIAN_POINT('',(-0.502156575521,3.850911458333E-02,1.6000001+ ));+#2746 = CARTESIAN_POINT('',(-0.502156575521,1.3330078125E-02,1.6000001)+ );+#2747 = CARTESIAN_POINT('',(-0.516796875,4.557291666667E-04,1.6000001));+#2748 = VECTOR('',#2749,1.);+#2749 = DIRECTION('',(0.,0.,1.));+#2750 = DEFINITIONAL_REPRESENTATION('',(#2751),#2760);+#2751 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2752,#2753,#2754,#2755,#2756,+ #2757,#2758,#2759),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.153977953633,+ 1.),.UNSPECIFIED.);+#2752 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2753 = CARTESIAN_POINT('',(0.961500439844,-5.00001E-02));+#2754 = CARTESIAN_POINT('',(0.923000438272,-5.00001E-02));+#2755 = CARTESIAN_POINT('',(0.884500217552,-5.00001E-02));+#2756 = CARTESIAN_POINT('',(0.634463009993,-5.00001E-02));+#2757 = CARTESIAN_POINT('',(0.422926103621,-5.00001E-02));+#2758 = CARTESIAN_POINT('',(0.211426207221,-5.00001E-02));+#2759 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2761 = ORIENTED_EDGE('',*,*,#2762,.F.);+#2762 = EDGE_CURVE('',#2763,#2718,#2765,.T.);+#2763 = VERTEX_POINT('',#2764);+#2764 = CARTESIAN_POINT('',(-0.560034179688,-1.241861979167E-02,1.55));+#2765 = SURFACE_CURVE('',#2766,(#2772,#2781),.PCURVE_S1.);+#2766 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2767,#2768,#2769,#2770,#2771),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2767 = CARTESIAN_POINT('',(-0.560034179688,-1.241861979167E-02,1.55));+#2768 = CARTESIAN_POINT('',(-0.545743630885,-1.241861979167E-02,1.55));+#2769 = CARTESIAN_POINT('',(-0.533769033219,-1.02752832132E-02,1.55));+#2770 = CARTESIAN_POINT('',(-0.524119344769,-5.983485494331E-03,1.55));+#2771 = CARTESIAN_POINT('',(-0.516796875,4.557291666667E-04,1.55));+#2772 = PCURVE('',#2112,#2773);+#2773 = DEFINITIONAL_REPRESENTATION('',(#2774),#2780);+#2774 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2775,#2776,#2777,#2778,#2779),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2775 = CARTESIAN_POINT('',(1.249010415443,-0.509315296394));+#2776 = CARTESIAN_POINT('',(1.255246617511,-0.496457241765));+#2777 = CARTESIAN_POINT('',(1.258543682765,-0.484747662709));+#2778 = CARTESIAN_POINT('',(1.258893091147,-0.474192383053));+#2779 = CARTESIAN_POINT('',(1.256294774366,-0.464793936433));+#2780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2781 = PCURVE('',#2782,#2789);+#2782 = SURFACE_OF_LINEAR_EXTRUSION('',#2783,#2787);+#2783 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2784,#2785,#2786),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2784 = CARTESIAN_POINT('',(-0.516796875,4.557291666667E-04,1.6000001));+#2785 = CARTESIAN_POINT('',(-0.531437174479,-1.241861979167E-02,+ 1.6000001));+#2786 = CARTESIAN_POINT('',(-0.560034179688,-1.241861979167E-02,+ 1.6000001));+#2787 = VECTOR('',#2788,1.);+#2788 = DIRECTION('',(0.,0.,1.));+#2789 = DEFINITIONAL_REPRESENTATION('',(#2790),#2796);+#2790 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2791,#2792,#2793,#2794,#2795),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2791 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2792 = CARTESIAN_POINT('',(0.750139067041,-5.00001E-02));+#2793 = CARTESIAN_POINT('',(0.500145647208,-5.00001E-02));+#2794 = CARTESIAN_POINT('',(0.250079234369,-5.00001E-02));+#2795 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2797 = ORIENTED_EDGE('',*,*,#2798,.T.);+#2798 = EDGE_CURVE('',#2763,#2799,#2801,.T.);+#2799 = VERTEX_POINT('',#2800);+#2800 = CARTESIAN_POINT('',(-0.586694335938,-1.241861979167E-02,1.55));+#2801 = SURFACE_CURVE('',#2802,(#2806,#2813),.PCURVE_S1.);+#2802 = LINE('',#2803,#2804);+#2803 = CARTESIAN_POINT('',(-0.603429204205,-1.241861979167E-02,1.55));+#2804 = VECTOR('',#2805,1.);+#2805 = DIRECTION('',(-1.,0.,0.));+#2806 = PCURVE('',#2112,#2807);+#2807 = DEFINITIONAL_REPRESENTATION('',(#2808),#2812);+#2808 = LINE('',#2809,#2810);+#2809 = CARTESIAN_POINT('',(1.230073414116,-0.548360374619));+#2810 = VECTOR('',#2811,1.);+#2811 = DIRECTION('',(-0.436386464522,-0.899759330922));+#2812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2813 = PCURVE('',#2814,#2819);+#2814 = PLANE('',#2815);+#2815 = AXIS2_PLACEMENT_3D('',#2816,#2817,#2818);+#2816 = CARTESIAN_POINT('',(-0.560034179688,-1.241861979167E-02,+ 1.6000001));+#2817 = DIRECTION('',(0.,1.,0.));+#2818 = DIRECTION('',(-1.,0.,0.));+#2819 = DEFINITIONAL_REPRESENTATION('',(#2820),#2823);+#2820 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2821,#2822),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-4.339502451725E-02,-1.673486826725E-02),+ .PIECEWISE_BEZIER_KNOTS.);+#2821 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2822 = CARTESIAN_POINT('',(2.666015625E-02,-5.00001E-02));+#2823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2824 = ORIENTED_EDGE('',*,*,#2825,.T.);+#2825 = EDGE_CURVE('',#2799,#2563,#2826,.T.);+#2826 = SURFACE_CURVE('',#2827,(#2831,#2838),.PCURVE_S1.);+#2827 = LINE('',#2828,#2829);+#2828 = CARTESIAN_POINT('',(-0.586694335938,0.660614918826,1.55));+#2829 = VECTOR('',#2830,1.);+#2830 = DIRECTION('',(0.,-1.,0.));+#2831 = PCURVE('',#2112,#2832);+#2832 = DEFINITIONAL_REPRESENTATION('',(#2833),#2837);+#2833 = LINE('',#2834,#2835);+#2834 = CARTESIAN_POINT('',(0.631808077719,-0.239600294322));+#2835 = VECTOR('',#2836,1.);+#2836 = DIRECTION('',(0.899759330922,-0.436386464522));+#2837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2838 = PCURVE('',#2839,#2844);+#2839 = PLANE('',#2840);+#2840 = AXIS2_PLACEMENT_3D('',#2841,#2842,#2843);+#2841 = CARTESIAN_POINT('',(-0.586694335938,-1.241861979167E-02,+ 1.6000001));+#2842 = DIRECTION('',(-1.,0.,0.));+#2843 = DIRECTION('',(0.,-1.,0.));+#2844 = DEFINITIONAL_REPRESENTATION('',(#2845),#2848);+#2845 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2846,#2847),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.673033538617,0.741392913617),.PIECEWISE_BEZIER_KNOTS.);+#2846 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2847 = CARTESIAN_POINT('',(6.8359375E-02,-5.00001E-02));+#2848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2849 = FACE_BOUND('',#2850,.T.);+#2850 = EDGE_LOOP('',(#2851,#2889,#2916,#2952,#2988,#3024,#3069,#3105,+ #3141,#3168,#3204,#3240,#3276,#3312,#3348,#3384,#3411,#3447,#3483,+ #3519,#3555,#3591,#3627,#3654,#3690,#3726,#3762,#3798));+#2851 = ORIENTED_EDGE('',*,*,#2852,.F.);+#2852 = EDGE_CURVE('',#2853,#2855,#2857,.T.);+#2853 = VERTEX_POINT('',#2854);+#2854 = CARTESIAN_POINT('',(-0.376375325521,8.351236979167E-02,1.55));+#2855 = VERTEX_POINT('',#2856);+#2856 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,1.55));+#2857 = SURFACE_CURVE('',#2858,(#2864,#2873),.PCURVE_S1.);+#2858 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2859,#2860,#2861,#2862,#2863),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2859 = CARTESIAN_POINT('',(-0.376375325521,8.351236979167E-02,1.55));+#2860 = CARTESIAN_POINT('',(-0.382356514708,8.573395434686E-02,1.55));+#2861 = CARTESIAN_POINT('',(-0.388148020295,8.758536023001E-02,1.55));+#2862 = CARTESIAN_POINT('',(-0.393749790722,8.906652605333E-02,1.55));+#2863 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,1.55));+#2864 = PCURVE('',#2112,#2865);+#2865 = DEFINITIONAL_REPRESENTATION('',(#2866),#2872);+#2866 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2867,#2868,#2869,#2870,#2871),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2867 = CARTESIAN_POINT('',(1.242841850489,-0.302203543269));+#2868 = CARTESIAN_POINT('',(1.238232849053,-0.30661570462));+#2869 = CARTESIAN_POINT('',(1.234039694687,-0.311018737345));+#2870 = CARTESIAN_POINT('',(1.230262465125,-0.315412621839));+#2871 = CARTESIAN_POINT('',(1.22690121741,-0.31979733894));+#2872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2873 = PCURVE('',#2874,#2881);+#2874 = SURFACE_OF_LINEAR_EXTRUSION('',#2875,#2879);+#2875 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2876,#2877,#2878),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2876 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,1.6000001+ ));+#2877 = CARTESIAN_POINT('',(-0.388338216146,8.795572916667E-02,1.6000001+ ));+#2878 = CARTESIAN_POINT('',(-0.376375325521,8.351236979167E-02,1.6000001+ ));+#2879 = VECTOR('',#2880,1.);+#2880 = DIRECTION('',(0.,0.,1.));+#2881 = DEFINITIONAL_REPRESENTATION('',(#2882),#2888);+#2882 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2883,#2884,#2885,#2886,#2887),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2883 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2884 = CARTESIAN_POINT('',(0.750010704998,-5.00001E-02));+#2885 = CARTESIAN_POINT('',(0.500013581989,-5.00001E-02));+#2886 = CARTESIAN_POINT('',(0.250009667704,-5.00001E-02));+#2887 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2889 = ORIENTED_EDGE('',*,*,#2890,.T.);+#2890 = EDGE_CURVE('',#2853,#2891,#2893,.T.);+#2891 = VERTEX_POINT('',#2892);+#2892 = CARTESIAN_POINT('',(-0.376375325521,6.015625E-02,1.55));+#2893 = SURFACE_CURVE('',#2894,(#2898,#2905),.PCURVE_S1.);+#2894 = LINE('',#2895,#2896);+#2895 = CARTESIAN_POINT('',(-0.376375325521,0.708580413617,1.55));+#2896 = VECTOR('',#2897,1.);+#2897 = DIRECTION('',(0.,-1.,0.));+#2898 = PCURVE('',#2112,#2899);+#2899 = DEFINITIONAL_REPRESENTATION('',(#2900),#2904);+#2900 = LINE('',#2901,#2902);+#2901 = CARTESIAN_POINT('',(0.680431045595,-2.943230953791E-02));+#2902 = VECTOR('',#2903,1.);+#2903 = DIRECTION('',(0.899759330922,-0.436386464522));+#2904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2905 = PCURVE('',#2906,#2911);+#2906 = PLANE('',#2907);+#2907 = AXIS2_PLACEMENT_3D('',#2908,#2909,#2910);+#2908 = CARTESIAN_POINT('',(-0.376375325521,8.351236979167E-02,1.6000001+ ));+#2909 = DIRECTION('',(-1.,0.,0.));+#2910 = DIRECTION('',(0.,-1.,0.));+#2911 = DEFINITIONAL_REPRESENTATION('',(#2912),#2915);+#2912 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#2913,#2914),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.625068043826,0.648424163617),.PIECEWISE_BEZIER_KNOTS.);+#2913 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2914 = CARTESIAN_POINT('',(2.335611979167E-02,-5.00001E-02));+#2915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2916 = ORIENTED_EDGE('',*,*,#2917,.F.);+#2917 = EDGE_CURVE('',#2918,#2891,#2920,.T.);+#2918 = VERTEX_POINT('',#2919);+#2919 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,1.55));+#2920 = SURFACE_CURVE('',#2921,(#2927,#2936),.PCURVE_S1.);+#2921 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2922,#2923,#2924,#2925,#2926),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2922 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,1.55));+#2923 = CARTESIAN_POINT('',(-0.392126313872,6.858719061964E-02,1.55));+#2924 = CARTESIAN_POINT('',(-0.386866364405,6.632747733639E-02,1.55));+#2925 = CARTESIAN_POINT('',(-0.381616022664,6.351713186375E-02,1.55));+#2926 = CARTESIAN_POINT('',(-0.376375325521,6.015625E-02,1.55));+#2927 = PCURVE('',#2112,#2928);+#2928 = DEFINITIONAL_REPRESENTATION('',(#2929),#2935);+#2929 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2930,#2931,#2932,#2933,#2934),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2930 = CARTESIAN_POINT('',(1.245560135935,-0.326884288469));+#2931 = CARTESIAN_POINT('',(1.249397401595,-0.322888788181));+#2932 = CARTESIAN_POINT('',(1.253725970458,-0.319142207858));+#2933 = CARTESIAN_POINT('',(1.25854578309,-0.315644560611));+#2934 = CARTESIAN_POINT('',(1.263856737206,-0.31239583781));+#2935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2936 = PCURVE('',#2937,#2944);+#2937 = SURFACE_OF_LINEAR_EXTRUSION('',#2938,#2942);+#2938 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2939,#2940,#2941),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2939 = CARTESIAN_POINT('',(-0.376375325521,6.015625E-02,1.6000001));+#2940 = CARTESIAN_POINT('',(-0.386857096354,6.687825520833E-02,1.6000001+ ));+#2941 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,1.6000001+ ));+#2942 = VECTOR('',#2943,1.);+#2943 = DIRECTION('',(0.,0.,1.));+#2944 = DEFINITIONAL_REPRESENTATION('',(#2945),#2951);+#2945 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2946,#2947,#2948,#2949,#2950),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2946 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2947 = CARTESIAN_POINT('',(0.749992837311,-5.00001E-02));+#2948 = CARTESIAN_POINT('',(0.499989237304,-5.00001E-02));+#2949 = CARTESIAN_POINT('',(0.249991019018,-5.00001E-02));+#2950 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2952 = ORIENTED_EDGE('',*,*,#2953,.F.);+#2953 = EDGE_CURVE('',#2954,#2918,#2956,.T.);+#2954 = VERTEX_POINT('',#2955);+#2955 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,1.55));+#2956 = SURFACE_CURVE('',#2957,(#2963,#2972),.PCURVE_S1.);+#2957 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2958,#2959,#2960,#2961,#2962),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2958 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,1.55));+#2959 = CARTESIAN_POINT('',(-0.413289365823,7.371419270833E-02,1.55));+#2960 = CARTESIAN_POINT('',(-0.407962996164,7.314452652683E-02,1.55));+#2961 = CARTESIAN_POINT('',(-0.402665138857,7.200518791203E-02,1.55));+#2962 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,1.55));+#2963 = PCURVE('',#2112,#2964);+#2964 = DEFINITIONAL_REPRESENTATION('',(#2965),#2971);+#2965 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2966,#2967,#2968,#2969,#2970),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2966 = CARTESIAN_POINT('',(1.233212284552,-0.3445111545));+#2967 = CARTESIAN_POINT('',(1.235549064207,-0.339693087329));+#2968 = CARTESIAN_POINT('',(1.238385982293,-0.335149231139));+#2969 = CARTESIAN_POINT('',(1.241723026063,-0.330879626543));+#2970 = CARTESIAN_POINT('',(1.245560135935,-0.326884288469));+#2971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2972 = PCURVE('',#2973,#2980);+#2973 = SURFACE_OF_LINEAR_EXTRUSION('',#2974,#2978);+#2974 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#2975,#2976,#2977),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2975 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,1.6000001+ ));+#2976 = CARTESIAN_POINT('',(-0.407934570313,7.371419270833E-02,1.6000001+ ));+#2977 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,1.6000001+ ));+#2978 = VECTOR('',#2979,1.);+#2979 = DIRECTION('',(0.,0.,1.));+#2980 = DEFINITIONAL_REPRESENTATION('',(#2981),#2987);+#2981 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2982,#2983,#2984,#2985,#2986),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2982 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#2983 = CARTESIAN_POINT('',(0.749998963644,-5.00001E-02));+#2984 = CARTESIAN_POINT('',(0.499997317488,-5.00001E-02));+#2985 = CARTESIAN_POINT('',(0.249997012656,-5.00001E-02));+#2986 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#2987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2988 = ORIENTED_EDGE('',*,*,#2989,.F.);+#2989 = EDGE_CURVE('',#2990,#2954,#2992,.T.);+#2990 = VERTEX_POINT('',#2991);+#2991 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.55));+#2992 = SURFACE_CURVE('',#2993,(#2999,#3008),.PCURVE_S1.);+#2993 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#2994,#2995,#2996,#2997,#2998),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2994 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.55));+#2995 = CARTESIAN_POINT('',(-0.439664317105,6.992626163721E-02,1.55));+#2996 = CARTESIAN_POINT('',(-0.433796262102,7.245183004067E-02,1.55));+#2997 = CARTESIAN_POINT('',(-0.426789116776,7.371419270833E-02,1.55));+#2998 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,1.55));+#2999 = PCURVE('',#2112,#3000);+#3000 = DEFINITIONAL_REPRESENTATION('',(#3001),#3007);+#3001 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3002,#3003,#3004,#3005,#3006),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3002 = CARTESIAN_POINT('',(1.22879292553,-0.370985066622));+#3003 = CARTESIAN_POINT('',(1.227447618791,-0.365077197696));+#3004 = CARTESIAN_POINT('',(1.227735954831,-0.358695236586));+#3005 = CARTESIAN_POINT('',(1.229657955617,-0.351839614214));+#3006 = CARTESIAN_POINT('',(1.233212284552,-0.3445111545));+#3007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3008 = PCURVE('',#3009,#3016);+#3009 = SURFACE_OF_LINEAR_EXTRUSION('',#3010,#3014);+#3010 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3011,#3012,#3013),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3011 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,1.6000001+ ));+#3012 = CARTESIAN_POINT('',(-0.434936523438,7.371419270833E-02,1.6000001+ ));+#3013 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.6000001)+ );+#3014 = VECTOR('',#3015,1.);+#3015 = DIRECTION('',(0.,0.,1.));+#3016 = DEFINITIONAL_REPRESENTATION('',(#3017),#3023);+#3017 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3018,#3019,#3020,#3021,#3022),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3018 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3019 = CARTESIAN_POINT('',(0.749979038679,-5.00001E-02));+#3020 = CARTESIAN_POINT('',(0.499960487517,-5.00001E-02));+#3021 = CARTESIAN_POINT('',(0.249961705651,-5.00001E-02));+#3022 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3024 = ORIENTED_EDGE('',*,*,#3025,.F.);+#3025 = EDGE_CURVE('',#3026,#2990,#3028,.T.);+#3026 = VERTEX_POINT('',#3027);+#3027 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,1.55));+#3028 = SURFACE_CURVE('',#3029,(#3038,#3050),.PCURVE_S1.);+#3029 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3030,#3031,#3032,#3033,#3034,+ #3035,#3036,#3037),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.580003081296,+ 1.),.UNSPECIFIED.);+#3030 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,1.55));+#3031 = CARTESIAN_POINT('',(-0.453849283854,4.942021325879E-02,1.55));+#3032 = CARTESIAN_POINT('',(-0.453319152061,5.285677279779E-02,1.55));+#3033 = CARTESIAN_POINT('',(-0.452258762705,5.599635885867E-02,1.55));+#3034 = CARTESIAN_POINT('',(-0.449516354597,6.089725976312E-02,1.55));+#3035 = CARTESIAN_POINT('',(-0.448086526373,6.279986199205E-02,1.55));+#3036 = CARTESIAN_POINT('',(-0.446378688748,6.454667471865E-02,1.55));+#3037 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.55));+#3038 = PCURVE('',#2112,#3039);+#3039 = DEFINITIONAL_REPRESENTATION('',(#3040),#3049);+#3040 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3041,#3042,#3043,#3044,#3045,+ #3046,#3047,#3048),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.580003081296,+ 1.),.UNSPECIFIED.);+#3041 = CARTESIAN_POINT('',(1.243067129036,-0.388418005488));+#3042 = CARTESIAN_POINT('',(1.239707999671,-0.38678881584));+#3043 = CARTESIAN_POINT('',(1.236847265498,-0.384812156745));+#3044 = CARTESIAN_POINT('',(1.234485133207,-0.382487988666));+#3045 = CARTESIAN_POINT('',(1.231272251667,-0.377881794563));+#3046 = CARTESIAN_POINT('',(1.230184325242,-0.375765023417));+#3047 = CARTESIAN_POINT('',(1.229357891415,-0.373466095148));+#3048 = CARTESIAN_POINT('',(1.22879292553,-0.370985066622));+#3049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3050 = PCURVE('',#3051,#3058);+#3051 = SURFACE_OF_LINEAR_EXTRUSION('',#3052,#3056);+#3052 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3053,#3054,#3055),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3053 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.6000001)+ );+#3054 = CARTESIAN_POINT('',(-0.453849283854,5.856119791667E-02,1.6000001+ ));+#3055 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,1.6000001+ ));+#3056 = VECTOR('',#3057,1.);+#3057 = DIRECTION('',(0.,0.,1.));+#3058 = DEFINITIONAL_REPRESENTATION('',(#3059),#3068);+#3059 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3060,#3061,#3062,#3063,#3064,+ #3065,#3066,#3067),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.580003081296,+ 1.),.UNSPECIFIED.);+#3060 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3061 = CARTESIAN_POINT('',(0.85500764689,-5.00001E-02));+#3062 = CARTESIAN_POINT('',(0.710007651248,-5.00001E-02));+#3063 = CARTESIAN_POINT('',(0.565003828999,-5.00001E-02));+#3064 = CARTESIAN_POINT('',(0.314998555449,-5.00001E-02));+#3065 = CARTESIAN_POINT('',(0.209997107217,-5.00001E-02));+#3066 = CARTESIAN_POINT('',(0.10499710557,-5.00001E-02));+#3067 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3069 = ORIENTED_EDGE('',*,*,#3070,.F.);+#3070 = EDGE_CURVE('',#3071,#3026,#3073,.T.);+#3071 = VERTEX_POINT('',#3072);+#3072 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,1.55));+#3073 = SURFACE_CURVE('',#3074,(#3080,#3089),.PCURVE_S1.);+#3074 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3075,#3076,#3077,#3078,#3079),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3075 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,1.55));+#3076 = CARTESIAN_POINT('',(-0.450744725606,3.14454047642E-02,1.55));+#3077 = CARTESIAN_POINT('',(-0.452814556068,3.530028882544E-02,1.55));+#3078 = CARTESIAN_POINT('',(-0.453849283854,4.004762881032E-02,1.55));+#3079 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,1.55));+#3080 = PCURVE('',#2112,#3081);+#3081 = DEFINITIONAL_REPRESENTATION('',(#3082),#3088);+#3082 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3083,#3084,#3085,#3086,#3087),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3083 = CARTESIAN_POINT('',(1.261256045849,-0.390338615974));+#3084 = CARTESIAN_POINT('',(1.257235788533,-0.391839423717));+#3085 = CARTESIAN_POINT('',(1.252864074632,-0.392019553762));+#3086 = CARTESIAN_POINT('',(1.248141069983,-0.390878884831));+#3087 = CARTESIAN_POINT('',(1.243067129036,-0.388418005488));+#3088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3089 = PCURVE('',#3090,#3097);+#3090 = SURFACE_OF_LINEAR_EXTRUSION('',#3091,#3095);+#3091 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3092,#3093,#3094),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3092 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,1.6000001+ ));+#3093 = CARTESIAN_POINT('',(-0.453849283854,3.440755208333E-02,1.6000001+ ));+#3094 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,1.6000001+ ));+#3095 = VECTOR('',#3096,1.);+#3096 = DIRECTION('',(0.,0.,1.));+#3097 = DEFINITIONAL_REPRESENTATION('',(#3098),#3104);+#3098 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3099,#3100,#3101,#3102,#3103),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3099 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3100 = CARTESIAN_POINT('',(0.749992213307,-5.00001E-02));+#3101 = CARTESIAN_POINT('',(0.499982149238,-5.00001E-02));+#3102 = CARTESIAN_POINT('',(0.249981014354,-5.00001E-02));+#3103 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3105 = ORIENTED_EDGE('',*,*,#3106,.F.);+#3106 = EDGE_CURVE('',#3107,#3071,#3109,.T.);+#3107 = VERTEX_POINT('',#3108);+#3108 = CARTESIAN_POINT('',(-0.424454752604,1.857096354167E-02,1.55));+#3109 = SURFACE_CURVE('',#3110,(#3116,#3125),.PCURVE_S1.);+#3110 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3111,#3112,#3113,#3114,#3115),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3111 = CARTESIAN_POINT('',(-0.424454752604,1.857096354167E-02,1.55));+#3112 = CARTESIAN_POINT('',(-0.432940416279,2.056424024377E-02,1.55));+#3113 = CARTESIAN_POINT('',(-0.439634593312,2.288061530618E-02,1.55));+#3114 = CARTESIAN_POINT('',(-0.444534727725,2.552026917152E-02,1.55));+#3115 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,1.55));+#3116 = PCURVE('',#2112,#3117);+#3117 = DEFINITIONAL_REPRESENTATION('',(#3118),#3124);+#3118 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3119,#3120,#3121,#3122,#3123),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3119 = CARTESIAN_POINT('',(1.280292275524,-0.373803007087));+#3120 = CARTESIAN_POINT('',(1.274795777442,-0.380568223184));+#3121 = CARTESIAN_POINT('',(1.269790349118,-0.385580536709));+#3122 = CARTESIAN_POINT('',(1.26527694359,-0.388837569152));+#3123 = CARTESIAN_POINT('',(1.261256045849,-0.390338615974));+#3124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3125 = PCURVE('',#3126,#3133);+#3126 = SURFACE_OF_LINEAR_EXTRUSION('',#3127,#3131);+#3127 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3128,#3129,#3130),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3128 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,1.6000001+ ));+#3129 = CARTESIAN_POINT('',(-0.441430664063,2.255859375E-02,1.6000001));+#3130 = CARTESIAN_POINT('',(-0.424454752604,1.857096354167E-02,1.6000001+ ));+#3131 = VECTOR('',#3132,1.);+#3132 = DIRECTION('',(0.,0.,1.));+#3133 = DEFINITIONAL_REPRESENTATION('',(#3134),#3140);+#3134 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3135,#3136,#3137,#3138,#3139),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3135 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3136 = CARTESIAN_POINT('',(0.750067509026,-5.00001E-02));+#3137 = CARTESIAN_POINT('',(0.500076767646,-5.00001E-02));+#3138 = CARTESIAN_POINT('',(0.250047612777,-5.00001E-02));+#3139 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3141 = ORIENTED_EDGE('',*,*,#3142,.T.);+#3142 = EDGE_CURVE('',#3107,#3143,#3145,.T.);+#3143 = VERTEX_POINT('',#3144);+#3144 = CARTESIAN_POINT('',(-0.412377929688,1.583658854167E-02,1.55));+#3145 = SURFACE_CURVE('',#3146,(#3150,#3157),.PCURVE_S1.);+#3146 = LINE('',#3147,#3148);+#3147 = CARTESIAN_POINT('',(-0.671834560348,7.458148604975E-02,1.55));+#3148 = VECTOR('',#3149,1.);+#3149 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#3150 = PCURVE('',#2112,#3151);+#3151 = DEFINITIONAL_REPRESENTATION('',(#3152),#3156);+#3152 = LINE('',#3153,#3154);+#3153 = CARTESIAN_POINT('',(1.121943085572,-0.571943063493));+#3154 = VECTOR('',#3155,1.);+#3155 = DIRECTION('',(0.624303463772,0.781181915511));+#3156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3157 = PCURVE('',#3158,#3163);+#3158 = PLANE('',#3159);+#3159 = AXIS2_PLACEMENT_3D('',#3160,#3161,#3162);+#3160 = CARTESIAN_POINT('',(-0.424454752604,1.857096354167E-02,1.6000001+ ));+#3161 = DIRECTION('',(-0.220825652598,-0.975313298974,0.));+#3162 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#3163 = DEFINITIONAL_REPRESENTATION('',(#3164),#3167);+#3164 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3165,#3166),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.253641376575,0.266023882719),.PIECEWISE_BEZIER_KNOTS.);+#3165 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3166 = CARTESIAN_POINT('',(1.23825061438E-02,-5.00001E-02));+#3167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3168 = ORIENTED_EDGE('',*,*,#3169,.F.);+#3169 = EDGE_CURVE('',#3170,#3143,#3172,.T.);+#3170 = VERTEX_POINT('',#3171);+#3171 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.55));+#3172 = SURFACE_CURVE('',#3173,(#3179,#3188),.PCURVE_S1.);+#3173 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3174,#3175,#3176,#3177,#3178),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3174 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.55));+#3175 = CARTESIAN_POINT('',(-0.382984878947,4.274080244459E-03,1.55));+#3176 = CARTESIAN_POINT('',(-0.390620517104,9.192676848921E-03,1.55));+#3177 = CARTESIAN_POINT('',(-0.400419941352,1.304639126328E-02,1.55));+#3178 = CARTESIAN_POINT('',(-0.412377929688,1.583658854167E-02,1.55));+#3179 = PCURVE('',#2112,#3180);+#3180 = DEFINITIONAL_REPRESENTATION('',(#3181),#3187);+#3181 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3182,#3183,#3184,#3185,#3186),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3182 = CARTESIAN_POINT('',(1.319023373995,-0.340418105141));+#3183 = CARTESIAN_POINT('',(1.311252921224,-0.342729067667));+#3184 = CARTESIAN_POINT('',(1.303495278894,-0.347452895364));+#3185 = CARTESIAN_POINT('',(1.295751527289,-0.35458830996));+#3186 = CARTESIAN_POINT('',(1.288022717,-0.364130017219));+#3187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3188 = PCURVE('',#3189,#3196);+#3189 = SURFACE_OF_LINEAR_EXTRUSION('',#3190,#3194);+#3190 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3191,#3192,#3193),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3191 = CARTESIAN_POINT('',(-0.412377929688,1.583658854167E-02,1.6000001+ ));+#3192 = CARTESIAN_POINT('',(-0.388452148438,1.025390625E-02,1.6000001));+#3193 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.6000001)+ );+#3194 = VECTOR('',#3195,1.);+#3195 = DIRECTION('',(0.,0.,1.));+#3196 = DEFINITIONAL_REPRESENTATION('',(#3197),#3203);+#3197 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3198,#3199,#3200,#3201,#3202),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3198 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3199 = CARTESIAN_POINT('',(0.749932319579,-5.00001E-02));+#3200 = CARTESIAN_POINT('',(0.499886530253,-5.00001E-02));+#3201 = CARTESIAN_POINT('',(0.249897552163,-5.00001E-02));+#3202 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3204 = ORIENTED_EDGE('',*,*,#3205,.F.);+#3205 = EDGE_CURVE('',#3206,#3170,#3208,.T.);+#3206 = VERTEX_POINT('',#3207);+#3207 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,1.55));+#3208 = SURFACE_CURVE('',#3209,(#3215,#3224),.PCURVE_S1.);+#3209 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3210,#3211,#3212,#3213,#3214),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3210 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,1.55));+#3211 = CARTESIAN_POINT('',(-0.366577148438,-2.398508831966E-02,1.55));+#3212 = CARTESIAN_POINT('',(-0.368399237172,-1.511659389053E-02,1.55));+#3213 = CARTESIAN_POINT('',(-0.372045365069,-7.691013059741E-03,1.55));+#3214 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.55));+#3215 = PCURVE('',#2112,#3216);+#3216 = DEFINITIONAL_REPRESENTATION('',(#3217),#3223);+#3217 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3218,#3219,#3220,#3221,#3222),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3218 = CARTESIAN_POINT('',(1.353114680711,-0.344796481306));+#3219 = CARTESIAN_POINT('',(1.343839483331,-0.340297977702));+#3220 = CARTESIAN_POINT('',(1.335064837856,-0.338067328113));+#3221 = CARTESIAN_POINT('',(1.326792481354,-0.338107542744));+#3222 = CARTESIAN_POINT('',(1.319023373995,-0.340418105141));+#3223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3224 = PCURVE('',#3225,#3232);+#3225 = SURFACE_OF_LINEAR_EXTRUSION('',#3226,#3230);+#3226 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3227,#3228,#3229),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3227 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.6000001)+ );+#3228 = CARTESIAN_POINT('',(-0.366577148438,-1.3671875E-02,1.6000001));+#3229 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,+ 1.6000001));+#3230 = VECTOR('',#3231,1.);+#3231 = DIRECTION('',(0.,0.,1.));+#3232 = DEFINITIONAL_REPRESENTATION('',(#3233),#3239);+#3233 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3234,#3235,#3236,#3237,#3238),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3234 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3235 = CARTESIAN_POINT('',(0.750056758627,-5.00001E-02));+#3236 = CARTESIAN_POINT('',(0.500054117043,-5.00001E-02));+#3237 = CARTESIAN_POINT('',(0.250024382579,-5.00001E-02));+#3238 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3240 = ORIENTED_EDGE('',*,*,#3241,.F.);+#3241 = EDGE_CURVE('',#3242,#3206,#3244,.T.);+#3242 = VERTEX_POINT('',#3243);+#3243 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,1.55));+#3244 = SURFACE_CURVE('',#3245,(#3251,#3260),.PCURVE_S1.);+#3245 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3246,#3247,#3248,#3249,#3250),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3246 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,1.55));+#3247 = CARTESIAN_POINT('',(-0.374096076394,-6.494089436473E-02,1.55));+#3248 = CARTESIAN_POINT('',(-0.369082060181,-5.664133084807E-02,1.55));+#3249 = CARTESIAN_POINT('',(-0.366577148438,-4.642354096737E-02,1.55));+#3250 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,1.55));+#3251 = PCURVE('',#2112,#3252);+#3252 = DEFINITIONAL_REPRESENTATION('',(#3253),#3259);+#3253 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3254,#3255,#3256,#3257,#3258),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3254 = CARTESIAN_POINT('',(1.379868121216,-0.374486533854));+#3255 = CARTESIAN_POINT('',(1.377408693588,-0.364935762692));+#3256 = CARTESIAN_POINT('',(1.372129132679,-0.356802537638));+#3257 = CARTESIAN_POINT('',(1.364028690472,-0.350089814723));+#3258 = CARTESIAN_POINT('',(1.353114680711,-0.344796481306));+#3259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3260 = PCURVE('',#3261,#3268);+#3261 = SURFACE_OF_LINEAR_EXTRUSION('',#3262,#3266);+#3262 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3263,#3264,#3265),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3263 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,+ 1.6000001));+#3264 = CARTESIAN_POINT('',(-0.366577148438,-5.856119791667E-02,+ 1.6000001));+#3265 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,+ 1.6000001));+#3266 = VECTOR('',#3267,1.);+#3267 = DIRECTION('',(0.,0.,1.));+#3268 = DEFINITIONAL_REPRESENTATION('',(#3269),#3275);+#3269 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3270,#3271,#3272,#3273,#3274),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3270 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3271 = CARTESIAN_POINT('',(0.749979942455,-5.00001E-02));+#3272 = CARTESIAN_POINT('',(0.499933449216,-5.00001E-02));+#3273 = CARTESIAN_POINT('',(0.249920307523,-5.00001E-02));+#3274 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3276 = ORIENTED_EDGE('',*,*,#3277,.F.);+#3277 = EDGE_CURVE('',#3278,#3242,#3280,.T.);+#3278 = VERTEX_POINT('',#3279);+#3279 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.55));+#3280 = SURFACE_CURVE('',#3281,(#3287,#3296),.PCURVE_S1.);+#3281 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3282,#3283,#3284,#3285,#3286),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3282 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.55));+#3283 = CARTESIAN_POINT('',(-0.411018641809,-8.408203125E-02,1.55));+#3284 = CARTESIAN_POINT('',(-0.398939727737,-8.195763675982E-02,1.55));+#3285 = CARTESIAN_POINT('',(-0.389138134429,-7.770385269702E-02,1.55));+#3286 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,1.55));+#3287 = PCURVE('',#2112,#3288);+#3288 = DEFINITIONAL_REPRESENTATION('',(#3289),#3295);+#3289 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3290,#3291,#3292,#3293,#3294),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3290 = CARTESIAN_POINT('',(1.372257517356,-0.419419477697));+#3291 = CARTESIAN_POINT('',(1.378518602322,-0.406510118497));+#3292 = CARTESIAN_POINT('',(1.381878233164,-0.394714945853));+#3293 = CARTESIAN_POINT('',(1.382328133913,-0.384039577028));+#3294 = CARTESIAN_POINT('',(1.379868121216,-0.374486533854));+#3295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3296 = PCURVE('',#3297,#3304);+#3297 = SURFACE_OF_LINEAR_EXTRUSION('',#3298,#3302);+#3298 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3299,#3300,#3301),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3299 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,+ 1.6000001));+#3300 = CARTESIAN_POINT('',(-0.396655273438,-8.408203125E-02,1.6000001)+ );+#3301 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.6000001)+ );+#3302 = VECTOR('',#3303,1.);+#3303 = DIRECTION('',(0.,0.,1.));+#3304 = DEFINITIONAL_REPRESENTATION('',(#3305),#3311);+#3305 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3306,#3307,#3308,#3309,#3310),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3306 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3307 = CARTESIAN_POINT('',(0.750137571634,-5.00001E-02));+#3308 = CARTESIAN_POINT('',(0.500144846294,-5.00001E-02));+#3309 = CARTESIAN_POINT('',(0.250079534251,-5.00001E-02));+#3310 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3312 = ORIENTED_EDGE('',*,*,#3313,.F.);+#3313 = EDGE_CURVE('',#3314,#3278,#3316,.T.);+#3314 = VERTEX_POINT('',#3315);+#3315 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,1.55));+#3316 = SURFACE_CURVE('',#3317,(#3323,#3332),.PCURVE_S1.);+#3317 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3318,#3319,#3320,#3321,#3322),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3318 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,1.55));+#3319 = CARTESIAN_POINT('',(-0.443367582452,-8.280027823109E-02,1.55));+#3320 = CARTESIAN_POINT('',(-0.437348164757,-8.365477907947E-02,1.55));+#3321 = CARTESIAN_POINT('',(-0.431347698786,-8.408203125E-02,1.55));+#3322 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.55));+#3323 = PCURVE('',#2112,#3324);+#3324 = DEFINITIONAL_REPRESENTATION('',(#3325),#3331);+#3325 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3326,#3327,#3328,#3329,#3330),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3326 = CARTESIAN_POINT('',(1.359460399798,-0.439930767795));+#3327 = CARTESIAN_POINT('',(1.363248693245,-0.435057040018));+#3328 = CARTESIAN_POINT('',(1.366644330763,-0.430013905385));+#3329 = CARTESIAN_POINT('',(1.369647277021,-0.424801377202));+#3330 = CARTESIAN_POINT('',(1.372257517356,-0.419419477697));+#3331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3332 = PCURVE('',#3333,#3340);+#3333 = SURFACE_OF_LINEAR_EXTRUSION('',#3334,#3338);+#3334 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3335,#3336,#3337),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3335 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.6000001)+ );+#3336 = CARTESIAN_POINT('',(-0.437329101563,-8.408203125E-02,1.6000001)+ );+#3337 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,1.6000001+ ));+#3338 = VECTOR('',#3339,1.);+#3339 = DIRECTION('',(0.,0.,1.));+#3340 = DEFINITIONAL_REPRESENTATION('',(#3341),#3347);+#3341 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3342,#3343,#3344,#3345,#3346),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3342 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3343 = CARTESIAN_POINT('',(0.750002874545,-5.00001E-02));+#3344 = CARTESIAN_POINT('',(0.500003101643,-5.00001E-02));+#3345 = CARTESIAN_POINT('',(0.250001777846,-5.00001E-02));+#3346 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3348 = ORIENTED_EDGE('',*,*,#3349,.F.);+#3349 = EDGE_CURVE('',#3350,#3314,#3352,.T.);+#3350 = VERTEX_POINT('',#3351);+#3351 = CARTESIAN_POINT('',(-0.473673502604,-7.3828125E-02,1.55));+#3352 = SURFACE_CURVE('',#3353,(#3359,#3368),.PCURVE_S1.);+#3353 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3354,#3355,#3356,#3357,#3358),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3354 = CARTESIAN_POINT('',(-0.473673502604,-7.3828125E-02,1.55));+#3355 = CARTESIAN_POINT('',(-0.467578275294,-7.639153835477E-02,1.55));+#3356 = CARTESIAN_POINT('',(-0.461501917749,-7.852777631703E-02,1.55));+#3357 = CARTESIAN_POINT('',(-0.455444458346,-8.023679042333E-02,1.55));+#3358 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,1.55));+#3359 = PCURVE('',#2112,#3360);+#3360 = DEFINITIONAL_REPRESENTATION('',(#3361),#3367);+#3361 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3362,#3363,#3364,#3365,#3366),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3362 = CARTESIAN_POINT('',(1.341950821308,-0.45840974823));+#3363 = CARTESIAN_POINT('',(1.346917151089,-0.454044149474));+#3364 = CARTESIAN_POINT('',(1.351490891315,-0.449509115407));+#3365 = CARTESIAN_POINT('',(1.355671985997,-0.444804650411));+#3366 = CARTESIAN_POINT('',(1.359460399798,-0.439930767795));+#3367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3368 = PCURVE('',#3369,#3376);+#3369 = SURFACE_OF_LINEAR_EXTRUSION('',#3370,#3374);+#3370 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3371,#3372,#3373),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3371 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,1.6000001+ ));+#3372 = CARTESIAN_POINT('',(-0.461482747396,-7.8955078125E-02,1.6000001)+ );+#3373 = CARTESIAN_POINT('',(-0.473673502604,-7.3828125E-02,1.6000001));+#3374 = VECTOR('',#3375,1.);+#3375 = DIRECTION('',(0.,0.,1.));+#3376 = DEFINITIONAL_REPRESENTATION('',(#3377),#3383);+#3377 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3378,#3379,#3380,#3381,#3382),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3378 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3379 = CARTESIAN_POINT('',(0.750006164259,-5.00001E-02));+#3380 = CARTESIAN_POINT('',(0.500007488222,-5.00001E-02));+#3381 = CARTESIAN_POINT('',(0.250005067907,-5.00001E-02));+#3382 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3384 = ORIENTED_EDGE('',*,*,#3385,.T.);+#3385 = EDGE_CURVE('',#3350,#3386,#3388,.T.);+#3386 = VERTEX_POINT('',#3387);+#3387 = CARTESIAN_POINT('',(-0.473673502604,-4.933268229167E-02,1.55));+#3388 = SURFACE_CURVE('',#3389,(#3393,#3400),.PCURVE_S1.);+#3389 = LINE('',#3390,#3391);+#3390 = CARTESIAN_POINT('',(-0.473673502604,0.629910166222,1.55));+#3391 = VECTOR('',#3392,1.);+#3392 = DIRECTION('',(0.,1.,0.));+#3393 = PCURVE('',#2112,#3394);+#3394 = DEFINITIONAL_REPRESENTATION('',(#3395),#3399);+#3395 = LINE('',#3396,#3397);+#3396 = CARTESIAN_POINT('',(0.708755727254,-0.151307883375));+#3397 = VECTOR('',#3398,1.);+#3398 = DIRECTION('',(-0.899759330922,0.436386464522));+#3399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3400 = PCURVE('',#3401,#3406);+#3401 = PLANE('',#3402);+#3402 = AXIS2_PLACEMENT_3D('',#3403,#3404,#3405);+#3403 = CARTESIAN_POINT('',(-0.473673502604,-7.3828125E-02,1.6000001));+#3404 = DIRECTION('',(1.,0.,0.));+#3405 = DIRECTION('',(0.,1.,0.));+#3406 = DEFINITIONAL_REPRESENTATION('',(#3407),#3410);+#3407 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3408,#3409),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.703738291222,-0.679242848513),.PIECEWISE_BEZIER_KNOTS.);+#3408 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3409 = CARTESIAN_POINT('',(2.449544270833E-02,-5.00001E-02));+#3410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3411 = ORIENTED_EDGE('',*,*,#3412,.F.);+#3412 = EDGE_CURVE('',#3413,#3386,#3415,.T.);+#3413 = VERTEX_POINT('',#3414);+#3414 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.55));+#3415 = SURFACE_CURVE('',#3416,(#3422,#3431),.PCURVE_S1.);+#3416 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3417,#3418,#3419,#3420,#3421),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3417 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.55));+#3418 = CARTESIAN_POINT('',(-0.454732738774,-5.958642943516E-02,1.55));+#3419 = CARTESIAN_POINT('',(-0.460809382956,-5.690882715332E-02,1.55));+#3420 = CARTESIAN_POINT('',(-0.467123028861,-5.349080910275E-02,1.55));+#3421 = CARTESIAN_POINT('',(-0.473673502604,-4.933268229167E-02,1.55));+#3422 = PCURVE('',#2112,#3423);+#3423 = DEFINITIONAL_REPRESENTATION('',(#3424),#3430);+#3424 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3425,#3426,#3427,#3428,#3429),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3425 = CARTESIAN_POINT('',(1.341693339831,-0.430743866906));+#3426 = CARTESIAN_POINT('',(1.337402215798,-0.435152736062));+#3427 = CARTESIAN_POINT('',(1.33234125289,-0.439451783973));+#3428 = CARTESIAN_POINT('',(1.326510669641,-0.443640968975));+#3429 = CARTESIAN_POINT('',(1.319910818166,-0.447720268589));+#3430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3431 = PCURVE('',#3432,#3439);+#3432 = SURFACE_OF_LINEAR_EXTRUSION('',#3433,#3437);+#3433 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3434,#3435,#3436),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3434 = CARTESIAN_POINT('',(-0.473673502604,-4.933268229167E-02,+ 1.6000001));+#3435 = CARTESIAN_POINT('',(-0.460571289062,-5.764973958333E-02,+ 1.6000001));+#3436 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.6000001));+#3437 = VECTOR('',#3438,1.);+#3438 = DIRECTION('',(0.,0.,1.));+#3439 = DEFINITIONAL_REPRESENTATION('',(#3440),#3446);+#3440 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3441,#3442,#3443,#3444,#3445),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3441 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3442 = CARTESIAN_POINT('',(0.749979463227,-5.00001E-02));+#3443 = CARTESIAN_POINT('',(0.499970202582,-5.00001E-02));+#3444 = CARTESIAN_POINT('',(0.249975842733,-5.00001E-02));+#3445 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3447 = ORIENTED_EDGE('',*,*,#3448,.F.);+#3448 = EDGE_CURVE('',#3449,#3413,#3451,.T.);+#3449 = VERTEX_POINT('',#3450);+#3450 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,1.55));+#3451 = SURFACE_CURVE('',#3452,(#3458,#3467),.PCURVE_S1.);+#3452 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3453,#3454,#3455,#3456,#3457),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3453 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,1.55));+#3454 = CARTESIAN_POINT('',(-0.431290725473,-6.539713541667E-02,1.55));+#3455 = CARTESIAN_POINT('',(-0.437186772582,-6.475151138828E-02,1.55));+#3456 = CARTESIAN_POINT('',(-0.443054292567,-6.346025549406E-02,1.55));+#3457 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.55));+#3458 = PCURVE('',#2112,#3459);+#3459 = DEFINITIONAL_REPRESENTATION('',(#3460),#3466);+#3460 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3461,#3462,#3463,#3464,#3465),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3461 = CARTESIAN_POINT('',(1.355445607982,-0.411265642064));+#3462 = CARTESIAN_POINT('',(1.35286023003,-0.416596279298));+#3463 = CARTESIAN_POINT('',(1.349706368634,-0.421619561113));+#3464 = CARTESIAN_POINT('',(1.345984042793,-0.426335430375));+#3465 = CARTESIAN_POINT('',(1.341693339831,-0.430743866906));+#3466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3467 = PCURVE('',#3468,#3475);+#3468 = SURFACE_OF_LINEAR_EXTRUSION('',#3469,#3473);+#3469 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3470,#3471,#3472),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3470 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.6000001));+#3471 = CARTESIAN_POINT('',(-0.437215169271,-6.539713541667E-02,+ 1.6000001));+#3472 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,+ 1.6000001));+#3473 = VECTOR('',#3474,1.);+#3474 = DIRECTION('',(0.,0.,1.));+#3475 = DEFINITIONAL_REPRESENTATION('',(#3476),#3482);+#3476 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3477,#3478,#3479,#3480,#3481),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3477 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3478 = CARTESIAN_POINT('',(0.749998507528,-5.00001E-02));+#3479 = CARTESIAN_POINT('',(0.49999634044,-5.00001E-02));+#3480 = CARTESIAN_POINT('',(0.249996003267,-5.00001E-02));+#3481 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3483 = ORIENTED_EDGE('',*,*,#3484,.F.);+#3484 = EDGE_CURVE('',#3485,#3449,#3487,.T.);+#3485 = VERTEX_POINT('',#3486);+#3486 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,1.55));+#3487 = SURFACE_CURVE('',#3488,(#3494,#3503),.PCURVE_S1.);+#3488 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3489,#3490,#3491,#3492,#3493),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3489 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,1.55));+#3490 = CARTESIAN_POINT('',(-0.403092974644,-6.149537890707E-02,1.55));+#3491 = CARTESIAN_POINT('',(-0.40922704639,-6.409690087761E-02,1.55));+#3492 = CARTESIAN_POINT('',(-0.416652040295,-6.539713541667E-02,1.55));+#3493 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,1.55));+#3494 = PCURVE('',#2112,#3495);+#3495 = DEFINITIONAL_REPRESENTATION('',(#3496),#3502);+#3496 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3497,#3498,#3499,#3500,#3501),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3497 = CARTESIAN_POINT('',(1.360256565839,-0.383462153212));+#3498 = CARTESIAN_POINT('',(1.361654704996,-0.38952241615));+#3499 = CARTESIAN_POINT('',(1.361318622781,-0.396176873416));+#3500 = CARTESIAN_POINT('',(1.3592483541,-0.403424985718));+#3501 = CARTESIAN_POINT('',(1.355445607982,-0.411265642064));+#3502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3503 = PCURVE('',#3504,#3511);+#3504 = SURFACE_OF_LINEAR_EXTRUSION('',#3505,#3509);+#3505 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3506,#3507,#3508),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3506 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,+ 1.6000001));+#3507 = CARTESIAN_POINT('',(-0.407934570313,-6.539713541667E-02,+ 1.6000001));+#3508 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,1.6000001+ ));+#3509 = VECTOR('',#3510,1.);+#3510 = DIRECTION('',(0.,0.,1.));+#3511 = DEFINITIONAL_REPRESENTATION('',(#3512),#3518);+#3512 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3513,#3514,#3515,#3516,#3517),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3513 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3514 = CARTESIAN_POINT('',(0.749972804953,-5.00001E-02));+#3515 = CARTESIAN_POINT('',(0.49995031158,-5.00001E-02));+#3516 = CARTESIAN_POINT('',(0.249952681723,-5.00001E-02));+#3517 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3519 = ORIENTED_EDGE('',*,*,#3520,.F.);+#3520 = EDGE_CURVE('',#3521,#3485,#3523,.T.);+#3521 = VERTEX_POINT('',#3522);+#3522 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,1.55));+#3523 = SURFACE_CURVE('',#3524,(#3530,#3539),.PCURVE_S1.);+#3524 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3525,#3526,#3527,#3528,#3529),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3525 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,1.55));+#3526 = CARTESIAN_POINT('',(-0.388566080729,-4.278097473454E-02,1.55));+#3527 = CARTESIAN_POINT('',(-0.390179844709,-4.875331466041E-02,1.55));+#3528 = CARTESIAN_POINT('',(-0.393408214864,-5.369060190802E-02,1.55));+#3529 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,1.55));+#3530 = PCURVE('',#2112,#3531);+#3531 = DEFINITIONAL_REPRESENTATION('',(#3532),#3538);+#3532 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3533,#3534,#3535,#3536,#3537),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3533 = CARTESIAN_POINT('',(1.344851659643,-0.365227568942));+#3534 = CARTESIAN_POINT('',(1.351155585095,-0.368284995129));+#3535 = CARTESIAN_POINT('',(1.355825028913,-0.372343242633));+#3536 = CARTESIAN_POINT('',(1.358858582145,-0.37740256413));+#3537 = CARTESIAN_POINT('',(1.360256565839,-0.383462153212));+#3538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3539 = PCURVE('',#3540,#3547);+#3540 = SURFACE_OF_LINEAR_EXTRUSION('',#3541,#3545);+#3541 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3542,#3543,#3544),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3542 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,1.6000001+ ));+#3543 = CARTESIAN_POINT('',(-0.388566080729,-4.978841145833E-02,+ 1.6000001));+#3544 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,+ 1.6000001));+#3545 = VECTOR('',#3546,1.);+#3546 = DIRECTION('',(0.,0.,1.));+#3547 = DEFINITIONAL_REPRESENTATION('',(#3548),#3554);+#3548 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3549,#3550,#3551,#3552,#3553),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3549 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3550 = CARTESIAN_POINT('',(0.75002143572,-5.00001E-02));+#3551 = CARTESIAN_POINT('',(0.500013890183,-5.00001E-02));+#3552 = CARTESIAN_POINT('',(0.249999393922,-5.00001E-02));+#3553 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3555 = ORIENTED_EDGE('',*,*,#3556,.F.);+#3556 = EDGE_CURVE('',#3557,#3521,#3559,.T.);+#3557 = VERTEX_POINT('',#3558);+#3558 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,1.55));+#3559 = SURFACE_CURVE('',#3560,(#3566,#3575),.PCURVE_S1.);+#3560 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3561,#3562,#3563,#3564,#3565),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3561 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,1.55));+#3562 = CARTESIAN_POINT('',(-0.391898446169,-1.965347572136E-02,1.55));+#3563 = CARTESIAN_POINT('',(-0.389676698109,-2.402114593346E-02,1.55));+#3564 = CARTESIAN_POINT('',(-0.388566080729,-2.939517005739E-02,1.55));+#3565 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,1.55));+#3566 = PCURVE('',#2112,#3567);+#3567 = DEFINITIONAL_REPRESENTATION('',(#3568),#3574);+#3568 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3569,#3570,#3571,#3572,#3573),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3569 = CARTESIAN_POINT('',(1.324413635939,-0.362722634827));+#3570 = CARTESIAN_POINT('',(1.328892202884,-0.361190794499));+#3571 = CARTESIAN_POINT('',(1.333791595693,-0.361097748114));+#3572 = CARTESIAN_POINT('',(1.339111582434,-0.362443611151));+#3573 = CARTESIAN_POINT('',(1.344851659643,-0.365227568942));+#3574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3575 = PCURVE('',#3576,#3583);+#3576 = SURFACE_OF_LINEAR_EXTRUSION('',#3577,#3581);+#3577 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3578,#3579,#3580),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3578 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,+ 1.6000001));+#3579 = CARTESIAN_POINT('',(-0.388566080729,-2.301432291667E-02,+ 1.6000001));+#3580 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,+ 1.6000001));+#3581 = VECTOR('',#3582,1.);+#3582 = DIRECTION('',(0.,0.,1.));+#3583 = DEFINITIONAL_REPRESENTATION('',(#3584),#3590);+#3584 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3585,#3586,#3587,#3588,#3589),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3585 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3586 = CARTESIAN_POINT('',(0.74998844029,-5.00001E-02));+#3587 = CARTESIAN_POINT('',(0.499975602052,-5.00001E-02));+#3588 = CARTESIAN_POINT('',(0.24997496918,-5.00001E-02));+#3589 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3591 = ORIENTED_EDGE('',*,*,#3592,.F.);+#3592 = EDGE_CURVE('',#3593,#3557,#3595,.T.);+#3593 = VERTEX_POINT('',#3594);+#3594 = CARTESIAN_POINT('',(-0.418416341146,-5.924479166667E-03,1.55));+#3595 = SURFACE_CURVE('',#3596,(#3602,#3611),.PCURVE_S1.);+#3596 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3597,#3598,#3599,#3600,#3601),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3597 = CARTESIAN_POINT('',(-0.418416341146,-5.924479166667E-03,1.55));+#3598 = CARTESIAN_POINT('',(-0.4101581655,-7.746973102383E-03,1.55));+#3599 = CARTESIAN_POINT('',(-0.403540084878,-1.008229241871E-02,1.55));+#3600 = CARTESIAN_POINT('',(-0.398564175832,-1.293077400955E-02,1.55));+#3601 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,1.55));+#3602 = PCURVE('',#2112,#3603);+#3603 = DEFINITIONAL_REPRESENTATION('',(#3604),#3610);+#3604 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3605,#3606,#3607,#3608,#3609),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3605 = CARTESIAN_POINT('',(1.304967359694,-0.379059369674));+#3606 = CARTESIAN_POINT('',(1.310210921692,-0.372424310765));+#3607 = CARTESIAN_POINT('',(1.315200187842,-0.367488732713));+#3608 = CARTESIAN_POINT('',(1.319934555088,-0.364254650929));+#3609 = CARTESIAN_POINT('',(1.324413635939,-0.362722634827));+#3610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3611 = PCURVE('',#3612,#3619);+#3612 = SURFACE_OF_LINEAR_EXTRUSION('',#3613,#3617);+#3613 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3614,#3615,#3616),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3614 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,+ 1.6000001));+#3615 = CARTESIAN_POINT('',(-0.401896158854,-9.5703125E-03,1.6000001));+#3616 = CARTESIAN_POINT('',(-0.418416341146,-5.924479166667E-03,+ 1.6000001));+#3617 = VECTOR('',#3618,1.);+#3618 = DIRECTION('',(0.,0.,1.));+#3619 = DEFINITIONAL_REPRESENTATION('',(#3620),#3626);+#3620 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3621,#3622,#3623,#3624,#3625),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3621 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3622 = CARTESIAN_POINT('',(0.75005797453,-5.00001E-02));+#3623 = CARTESIAN_POINT('',(0.500065496745,-5.00001E-02));+#3624 = CARTESIAN_POINT('',(0.250040248006,-5.00001E-02));+#3625 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3627 = ORIENTED_EDGE('',*,*,#3628,.T.);+#3628 = EDGE_CURVE('',#3593,#3629,#3631,.T.);+#3629 = VERTEX_POINT('',#3630);+#3630 = CARTESIAN_POINT('',(-0.430721028646,-3.076171875E-03,1.55));+#3631 = SURFACE_CURVE('',#3632,(#3636,#3643),.PCURVE_S1.);+#3632 = LINE('',#3633,#3634);+#3633 = CARTESIAN_POINT('',(-0.673969947197,5.323144816008E-02,1.55));+#3634 = VECTOR('',#3635,1.);+#3635 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#3636 = PCURVE('',#2112,#3637);+#3637 = DEFINITIONAL_REPRESENTATION('',(#3638),#3642);+#3638 = LINE('',#3639,#3640);+#3639 = CARTESIAN_POINT('',(1.140221127462,-0.583181265288));+#3640 = VECTOR('',#3641,1.);+#3641 = DIRECTION('',(-0.628056856012,-0.778167453455));+#3642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3643 = PCURVE('',#3644,#3649);+#3644 = PLANE('',#3645);+#3645 = AXIS2_PLACEMENT_3D('',#3646,#3647,#3648);+#3646 = CARTESIAN_POINT('',(-0.418416341146,-5.924479166667E-03,+ 1.6000001));+#3647 = DIRECTION('',(0.225518272727,0.97423893818,0.));+#3648 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#3649 = DEFINITIONAL_REPRESENTATION('',(#3650),#3653);+#3650 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3651,#3652),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.26231101636,-0.249680965335),.PIECEWISE_BEZIER_KNOTS.);+#3651 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3652 = CARTESIAN_POINT('',(1.263005102525E-02,-5.00001E-02));+#3653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3654 = ORIENTED_EDGE('',*,*,#3655,.F.);+#3655 = EDGE_CURVE('',#3656,#3629,#3658,.T.);+#3656 = VERTEX_POINT('',#3657);+#3657 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,1.55));+#3658 = SURFACE_CURVE('',#3659,(#3665,#3674),.PCURVE_S1.);+#3659 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3660,#3661,#3662,#3663,#3664),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3660 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,1.55));+#3661 = CARTESIAN_POINT('',(-0.45977220007,7.688850110028E-03,1.55));+#3662 = CARTESIAN_POINT('',(-0.452250411433,3.188053691728E-03,1.55));+#3663 = CARTESIAN_POINT('',(-0.442564966139,-3.998975376129E-04,1.55));+#3664 = CARTESIAN_POINT('',(-0.430721028646,-3.076171875E-03,1.55));+#3665 = PCURVE('',#2112,#3666);+#3666 = DEFINITIONAL_REPRESENTATION('',(#3667),#3673);+#3667 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3668,#3669,#3670,#3671,#3672),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3668 = CARTESIAN_POINT('',(1.267463326311,-0.412786151945));+#3669 = CARTESIAN_POINT('',(1.274671502589,-0.410329016996));+#3670 = CARTESIAN_POINT('',(1.282003542913,-0.405525304121));+#3671 = CARTESIAN_POINT('',(1.28945843274,-0.398376467695));+#3672 = CARTESIAN_POINT('',(1.297034969556,-0.388887664317));+#3673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3674 = PCURVE('',#3675,#3682);+#3675 = SURFACE_OF_LINEAR_EXTRUSION('',#3676,#3680);+#3676 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3677,#3678,#3679),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3677 = CARTESIAN_POINT('',(-0.430721028646,-3.076171875E-03,1.6000001)+ );+#3678 = CARTESIAN_POINT('',(-0.454418945313,2.278645833333E-03,1.6000001+ ));+#3679 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,1.6000001+ ));+#3680 = VECTOR('',#3681,1.);+#3681 = DIRECTION('',(0.,0.,1.));+#3682 = DEFINITIONAL_REPRESENTATION('',(#3683),#3689);+#3683 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3684,#3685,#3686,#3687,#3688),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3684 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3685 = CARTESIAN_POINT('',(0.749927030647,-5.00001E-02));+#3686 = CARTESIAN_POINT('',(0.499880680067,-5.00001E-02));+#3687 = CARTESIAN_POINT('',(0.249894065789,-5.00001E-02));+#3688 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3690 = ORIENTED_EDGE('',*,*,#3691,.F.);+#3691 = EDGE_CURVE('',#3692,#3656,#3694,.T.);+#3692 = VERTEX_POINT('',#3693);+#3693 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,1.55));+#3694 = SURFACE_CURVE('',#3695,(#3701,#3710),.PCURVE_S1.);+#3695 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3696,#3697,#3698,#3699,#3700),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3696 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,1.55));+#3697 = CARTESIAN_POINT('',(-0.475838216146,3.304179356138E-02,1.55));+#3698 = CARTESIAN_POINT('',(-0.474053836707,2.516088047947E-02,1.55));+#3699 = CARTESIAN_POINT('',(-0.470483633491,1.851423494947E-02,1.55));+#3700 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,1.55));+#3701 = PCURVE('',#2112,#3702);+#3702 = DEFINITIONAL_REPRESENTATION('',(#3703),#3709);+#3703 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3704,#3705,#3706,#3707,#3708),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3704 = CARTESIAN_POINT('',(1.236649317533,-0.409744026303));+#3705 = CARTESIAN_POINT('',(1.244848963198,-0.413720883513));+#3706 = CARTESIAN_POINT('',(1.252718567315,-0.41555449526));+#3707 = CARTESIAN_POINT('',(1.260256937009,-0.415242677746));+#3708 = CARTESIAN_POINT('',(1.267463326311,-0.412786151945));+#3709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3710 = PCURVE('',#3711,#3718);+#3711 = SURFACE_OF_LINEAR_EXTRUSION('',#3712,#3716);+#3712 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3713,#3714,#3715),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3713 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,1.6000001+ ));+#3714 = CARTESIAN_POINT('',(-0.475838216146,2.392578125E-02,1.6000001));+#3715 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,1.6000001+ ));+#3716 = VECTOR('',#3717,1.);+#3717 = DIRECTION('',(0.,0.,1.));+#3718 = DEFINITIONAL_REPRESENTATION('',(#3719),#3725);+#3719 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3720,#3721,#3722,#3723,#3724),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3720 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3721 = CARTESIAN_POINT('',(0.750039194826,-5.00001E-02));+#3722 = CARTESIAN_POINT('',(0.5000334582,-5.00001E-02));+#3723 = CARTESIAN_POINT('',(0.250010973906,-5.00001E-02));+#3724 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3726 = ORIENTED_EDGE('',*,*,#3727,.F.);+#3727 = EDGE_CURVE('',#3728,#3692,#3730,.T.);+#3728 = VERTEX_POINT('',#3729);+#3729 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,1.55));+#3730 = SURFACE_CURVE('',#3731,(#3737,#3746),.PCURVE_S1.);+#3731 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3732,#3733,#3734,#3735,#3736),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3732 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,1.55));+#3733 = CARTESIAN_POINT('',(-0.468176195199,7.180589341806E-02,1.55));+#3734 = CARTESIAN_POINT('',(-0.473285261769,6.343095569466E-02,1.55));+#3735 = CARTESIAN_POINT('',(-0.475838216146,5.354588521825E-02,1.55));+#3736 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,1.55));+#3737 = PCURVE('',#2112,#3738);+#3738 = DEFINITIONAL_REPRESENTATION('',(#3739),#3745);+#3739 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3740,#3741,#3742,#3743,#3744),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3740 = CARTESIAN_POINT('',(1.210481475694,-0.380021427943));+#3741 = CARTESIAN_POINT('',(1.213314204879,-0.389910780185));+#3742 = CARTESIAN_POINT('',(1.218620105744,-0.398162419968));+#3743 = CARTESIAN_POINT('',(1.226400215408,-0.404773175446));+#3744 = CARTESIAN_POINT('',(1.236649317533,-0.409744026303));+#3745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3746 = PCURVE('',#3747,#3754);+#3747 = SURFACE_OF_LINEAR_EXTRUSION('',#3748,#3752);+#3748 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3749,#3750,#3751),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3749 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,1.6000001+ ));+#3750 = CARTESIAN_POINT('',(-0.475838216146,6.494140625E-02,1.6000001));+#3751 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,1.6000001+ ));+#3752 = VECTOR('',#3753,1.);+#3753 = DIRECTION('',(0.,0.,1.));+#3754 = DEFINITIONAL_REPRESENTATION('',(#3755),#3761);+#3755 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3756,#3757,#3758,#3759,#3760),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3756 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3757 = CARTESIAN_POINT('',(0.750002425374,-5.00001E-02));+#3758 = CARTESIAN_POINT('',(0.499968068373,-5.00001E-02));+#3759 = CARTESIAN_POINT('',(0.249949709932,-5.00001E-02));+#3760 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3762 = ORIENTED_EDGE('',*,*,#3763,.F.);+#3763 = EDGE_CURVE('',#3764,#3728,#3766,.T.);+#3764 = VERTEX_POINT('',#3765);+#3765 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,1.55));+#3766 = SURFACE_CURVE('',#3767,(#3773,#3782),.PCURVE_S1.);+#3767 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3768,#3769,#3770,#3771,#3772),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3768 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,1.55));+#3769 = CARTESIAN_POINT('',(-0.432482937257,9.239908854167E-02,1.55));+#3770 = CARTESIAN_POINT('',(-0.443507240447,9.011240492736E-02,1.55));+#3771 = CARTESIAN_POINT('',(-0.452851416639,8.553552774097E-02,1.55));+#3772 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,1.55));+#3773 = PCURVE('',#2112,#3774);+#3774 = DEFINITIONAL_REPRESENTATION('',(#3775),#3781);+#3775 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3776,#3777,#3778,#3779,#3780),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3776 = CARTESIAN_POINT('',(1.215903190079,-0.337382435293));+#3777 = CARTESIAN_POINT('',(1.210361340054,-0.348808846688));+#3778 = CARTESIAN_POINT('',(1.20760794828,-0.359725944127));+#3779 = CARTESIAN_POINT('',(1.207648364222,-0.3701307411));+#3780 = CARTESIAN_POINT('',(1.210481475694,-0.380021427943));+#3781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3782 = PCURVE('',#3783,#3790);+#3783 = SURFACE_OF_LINEAR_EXTRUSION('',#3784,#3788);+#3784 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3785,#3786,#3787),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3785 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,1.6000001+ ));+#3786 = CARTESIAN_POINT('',(-0.445190429688,9.239908854167E-02,1.6000001+ ));+#3787 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,1.6000001+ ));+#3788 = VECTOR('',#3789,1.);+#3789 = DIRECTION('',(0.,0.,1.));+#3790 = DEFINITIONAL_REPRESENTATION('',(#3791),#3797);+#3791 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3792,#3793,#3794,#3795,#3796),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3792 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3793 = CARTESIAN_POINT('',(0.750079543535,-5.00001E-02));+#3794 = CARTESIAN_POINT('',(0.500073950511,-5.00001E-02));+#3795 = CARTESIAN_POINT('',(0.250031312629,-5.00001E-02));+#3796 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3798 = ORIENTED_EDGE('',*,*,#3799,.F.);+#3799 = EDGE_CURVE('',#2855,#3764,#3800,.T.);+#3800 = SURFACE_CURVE('',#3801,(#3807,#3816),.PCURVE_S1.);+#3801 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3802,#3803,#3804,#3805,#3806),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3802 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,1.55));+#3803 = CARTESIAN_POINT('',(-0.404573415833,9.128821752356E-02,1.55));+#3804 = CARTESIAN_POINT('',(-0.409814274603,9.202879076368E-02,1.55));+#3805 = CARTESIAN_POINT('',(-0.414884322155,9.239908854167E-02,1.55));+#3806 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,1.55));+#3807 = PCURVE('',#2112,#3808);+#3808 = DEFINITIONAL_REPRESENTATION('',(#3809),#3815);+#3809 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3810,#3811,#3812,#3813,#3814),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3810 = CARTESIAN_POINT('',(1.22690121741,-0.31979733894));+#3811 = CARTESIAN_POINT('',(1.223540193999,-0.324181763441));+#3812 = CARTESIAN_POINT('',(1.220586816486,-0.328574098883));+#3813 = CARTESIAN_POINT('',(1.218041137479,-0.332974328538));+#3814 = CARTESIAN_POINT('',(1.215903190079,-0.337382435293));+#3815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3816 = PCURVE('',#3817,#3824);+#3817 = SURFACE_OF_LINEAR_EXTRUSION('',#3818,#3822);+#3818 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3819,#3820,#3821),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3819 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,1.6000001+ ));+#3820 = CARTESIAN_POINT('',(-0.409985351563,9.239908854167E-02,1.6000001+ ));+#3821 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,1.6000001+ ));+#3822 = VECTOR('',#3823,1.);+#3823 = DIRECTION('',(0.,0.,1.));+#3824 = DEFINITIONAL_REPRESENTATION('',(#3825),#3831);+#3825 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3826,#3827,#3828,#3829,#3830),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3826 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3827 = CARTESIAN_POINT('',(0.750007015943,-5.00001E-02));+#3828 = CARTESIAN_POINT('',(0.500008690041,-5.00001E-02));+#3829 = CARTESIAN_POINT('',(0.250006018944,-5.00001E-02));+#3830 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3832 = FACE_BOUND('',#3833,.T.);+#3833 = EDGE_LOOP('',(#3834,#3872,#3899,#3926,#3953,#3980,#4016,#4052,+ #4088,#4124,#4160,#4196,#4232,#4268,#4295,#4331,#4367,#4403,#4448,+ #4484,#4520));+#3834 = ORIENTED_EDGE('',*,*,#3835,.F.);+#3835 = EDGE_CURVE('',#3836,#3838,#3840,.T.);+#3836 = VERTEX_POINT('',#3837);+#3837 = CARTESIAN_POINT('',(-0.308699544271,-6.140950520833E-02,1.55));+#3838 = VERTEX_POINT('',#3839);+#3839 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.55));+#3840 = SURFACE_CURVE('',#3841,(#3847,#3856),.PCURVE_S1.);+#3841 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3842,#3843,#3844,#3845,#3846),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3842 = CARTESIAN_POINT('',(-0.308699544271,-6.140950520833E-02,1.55));+#3843 = CARTESIAN_POINT('',(-0.296294384657,-4.837839717348E-02,1.55));+#3844 = CARTESIAN_POINT('',(-0.285991118943,-3.749600909954E-02,1.55));+#3845 = CARTESIAN_POINT('',(-0.277800670294,-2.877358360696E-02,1.55));+#3846 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.55));+#3847 = PCURVE('',#2112,#3848);+#3848 = DEFINITIONAL_REPRESENTATION('',(#3849),#3855);+#3849 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3850,#3851,#3852,#3853,#3854),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3850 = CARTESIAN_POINT('',(1.402769454688,-0.304553572275));+#3851 = CARTESIAN_POINT('',(1.396458037388,-0.287705314996));+#3852 = CARTESIAN_POINT('',(1.391162712873,-0.273685928674));+#3853 = CARTESIAN_POINT('',(1.386888830077,-0.262510147655));+#3854 = CARTESIAN_POINT('',(1.383639106142,-0.254185376852));+#3855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3856 = PCURVE('',#3857,#3864);+#3857 = SURFACE_OF_LINEAR_EXTRUSION('',#3858,#3862);+#3858 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#3859,#3860,#3861),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3859 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.6000001)+ );+#3860 = CARTESIAN_POINT('',(-0.283862304688,-3.531901041667E-02,+ 1.6000001));+#3861 = CARTESIAN_POINT('',(-0.308699544271,-6.140950520833E-02,+ 1.6000001));+#3862 = VECTOR('',#3863,1.);+#3863 = DIRECTION('',(0.,0.,1.));+#3864 = DEFINITIONAL_REPRESENTATION('',(#3865),#3871);+#3865 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3866,#3867,#3868,#3869,#3870),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3866 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#3867 = CARTESIAN_POINT('',(0.750270967666,-5.00001E-02));+#3868 = CARTESIAN_POINT('',(0.500325379179,-5.00001E-02));+#3869 = CARTESIAN_POINT('',(0.250216755784,-5.00001E-02));+#3870 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3872 = ORIENTED_EDGE('',*,*,#3873,.T.);+#3873 = EDGE_CURVE('',#3836,#3874,#3876,.T.);+#3874 = VERTEX_POINT('',#3875);+#3875 = CARTESIAN_POINT('',(-0.230541992188,-6.140950520833E-02,1.55));+#3876 = SURFACE_CURVE('',#3877,(#3881,#3888),.PCURVE_S1.);+#3877 = LINE('',#3878,#3879);+#3878 = CARTESIAN_POINT('',(-0.477761886496,-6.140950520833E-02,1.55));+#3879 = VECTOR('',#3880,1.);+#3880 = DIRECTION('',(1.,0.,-0.));+#3881 = PCURVE('',#2112,#3882);+#3882 = DEFINITIONAL_REPRESENTATION('',(#3883),#3887);+#3883 = LINE('',#3884,#3885);+#3884 = CARTESIAN_POINT('',(1.328992936881,-0.4566689922));+#3885 = VECTOR('',#3886,1.);+#3886 = DIRECTION('',(0.436386464522,0.899759330922));+#3887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3888 = PCURVE('',#3889,#3894);+#3889 = PLANE('',#3890);+#3890 = AXIS2_PLACEMENT_3D('',#3891,#3892,#3893);+#3891 = CARTESIAN_POINT('',(-0.308699544271,-6.140950520833E-02,+ 1.6000001));+#3892 = DIRECTION('',(0.,-1.,0.));+#3893 = DIRECTION('',(1.,0.,0.));+#3894 = DEFINITIONAL_REPRESENTATION('',(#3895),#3898);+#3895 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3896,#3897),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.169062342226,0.247219894309),.PIECEWISE_BEZIER_KNOTS.);+#3896 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3897 = CARTESIAN_POINT('',(7.815755208333E-02,-5.00001E-02));+#3898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3899 = ORIENTED_EDGE('',*,*,#3900,.T.);+#3900 = EDGE_CURVE('',#3874,#3901,#3903,.T.);+#3901 = VERTEX_POINT('',#3902);+#3902 = CARTESIAN_POINT('',(-0.230541992188,-8.077799479167E-02,1.55));+#3903 = SURFACE_CURVE('',#3904,(#3908,#3915),.PCURVE_S1.);+#3904 = LINE('',#3905,#3906);+#3905 = CARTESIAN_POINT('',(-0.230541992188,0.636119476117,1.55));+#3906 = VECTOR('',#3907,1.);+#3907 = DIRECTION('',(0.,-1.,0.));+#3908 = PCURVE('',#2112,#3909);+#3909 = DEFINITIONAL_REPRESENTATION('',(#3910),#3914);+#3910 = LINE('',#3911,#3912);+#3911 = CARTESIAN_POINT('',(0.809268142981,7.016162055668E-02));+#3912 = VECTOR('',#3913,1.);+#3913 = DIRECTION('',(0.899759330922,-0.436386464522));+#3914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3915 = PCURVE('',#3916,#3921);+#3916 = PLANE('',#3917);+#3917 = AXIS2_PLACEMENT_3D('',#3918,#3919,#3920);+#3918 = CARTESIAN_POINT('',(-0.230541992188,-6.140950520833E-02,+ 1.6000001));+#3919 = DIRECTION('',(-1.,0.,0.));+#3920 = DIRECTION('',(0.,-1.,0.));+#3921 = DEFINITIONAL_REPRESENTATION('',(#3922),#3925);+#3922 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3923,#3924),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.697528981326,0.716897470909),.PIECEWISE_BEZIER_KNOTS.);+#3923 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3924 = CARTESIAN_POINT('',(1.936848958333E-02,-5.00001E-02));+#3925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3926 = ORIENTED_EDGE('',*,*,#3927,.T.);+#3927 = EDGE_CURVE('',#3901,#3928,#3930,.T.);+#3928 = VERTEX_POINT('',#3929);+#3929 = CARTESIAN_POINT('',(-0.333878580729,-8.077799479167E-02,1.55));+#3930 = SURFACE_CURVE('',#3931,(#3935,#3942),.PCURVE_S1.);+#3931 = LINE('',#3932,#3933);+#3932 = CARTESIAN_POINT('',(-0.438683110455,-8.077799479167E-02,1.55));+#3933 = VECTOR('',#3934,1.);+#3934 = DIRECTION('',(-1.,0.,0.));+#3935 = PCURVE('',#2112,#3936);+#3936 = DEFINITIONAL_REPRESENTATION('',(#3937),#3941);+#3937 = LINE('',#3938,#3939);+#3938 = CARTESIAN_POINT('',(1.363473365024,-0.429959645508));+#3939 = VECTOR('',#3940,1.);+#3940 = DIRECTION('',(-0.436386464522,-0.899759330922));+#3941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3942 = PCURVE('',#3943,#3948);+#3943 = PLANE('',#3944);+#3944 = AXIS2_PLACEMENT_3D('',#3945,#3946,#3947);+#3945 = CARTESIAN_POINT('',(-0.230541992188,-8.077799479167E-02,+ 1.6000001));+#3946 = DIRECTION('',(0.,1.,0.));+#3947 = DIRECTION('',(-1.,0.,0.));+#3948 = DEFINITIONAL_REPRESENTATION('',(#3949),#3952);+#3949 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3950,#3951),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.208141118267,-0.104804529726),.PIECEWISE_BEZIER_KNOTS.);+#3950 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3951 = CARTESIAN_POINT('',(0.103336588542,-5.00001E-02));+#3952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3953 = ORIENTED_EDGE('',*,*,#3954,.T.);+#3954 = EDGE_CURVE('',#3928,#3955,#3957,.T.);+#3955 = VERTEX_POINT('',#3956);+#3956 = CARTESIAN_POINT('',(-0.333878580729,-6.140950520833E-02,1.55));+#3957 = SURFACE_CURVE('',#3958,(#3962,#3969),.PCURVE_S1.);+#3958 = LINE('',#3959,#3960);+#3959 = CARTESIAN_POINT('',(-0.333878580729,0.626435231326,1.55));+#3960 = VECTOR('',#3961,1.);+#3961 = DIRECTION('',(0.,1.,0.));+#3962 = PCURVE('',#2112,#3963);+#3963 = DEFINITIONAL_REPRESENTATION('',(#3964),#3968);+#3964 = LINE('',#3965,#3966);+#3965 = CARTESIAN_POINT('',(0.772886944066,-2.704251255557E-02));+#3966 = VECTOR('',#3967,1.);+#3967 = DIRECTION('',(-0.899759330922,0.436386464522));+#3968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3969 = PCURVE('',#3970,#3975);+#3970 = PLANE('',#3971);+#3971 = AXIS2_PLACEMENT_3D('',#3972,#3973,#3974);+#3972 = CARTESIAN_POINT('',(-0.333878580729,-8.077799479167E-02,+ 1.6000001));+#3973 = DIRECTION('',(1.,0.,0.));+#3974 = DIRECTION('',(0.,1.,0.));+#3975 = DEFINITIONAL_REPRESENTATION('',(#3976),#3979);+#3976 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3977,#3978),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707213226117,-0.687844736534),.PIECEWISE_BEZIER_KNOTS.);+#3977 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#3978 = CARTESIAN_POINT('',(1.936848958333E-02,-5.00001E-02));+#3979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3980 = ORIENTED_EDGE('',*,*,#3981,.F.);+#3981 = EDGE_CURVE('',#3982,#3955,#3984,.T.);+#3982 = VERTEX_POINT('',#3983);+#3983 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,1.55));+#3984 = SURFACE_CURVE('',#3985,(#3991,#4000),.PCURVE_S1.);+#3985 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3986,#3987,#3988,#3989,#3990),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3986 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,1.55));+#3987 = CARTESIAN_POINT('',(-0.304601073149,-3.03662900011E-02,1.55));+#3988 = CARTESIAN_POINT('',(-0.313470722342,-3.984365976824E-02,1.55));+#3989 = CARTESIAN_POINT('',(-0.323230433488,-5.019193832898E-02,1.55));+#3990 = CARTESIAN_POINT('',(-0.333878580729,-6.140950520833E-02,1.55));+#3991 = PCURVE('',#2112,#3992);+#3992 = DEFINITIONAL_REPRESENTATION('',(#3993),#3999);+#3993 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#3994,#3995,#3996,#3997,#3998),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3994 = CARTESIAN_POINT('',(1.372365565147,-0.276385296703));+#3995 = CARTESIAN_POINT('',(1.376626549467,-0.287319095709));+#3996 = CARTESIAN_POINT('',(1.381283306494,-0.299435441218));+#3997 = CARTESIAN_POINT('',(1.386335260846,-0.312732681084));+#3998 = CARTESIAN_POINT('',(1.391781663988,-0.327208645272));+#3999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4000 = PCURVE('',#4001,#4008);+#4001 = SURFACE_OF_LINEAR_EXTRUSION('',#4002,#4006);+#4002 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4003,#4004,#4005),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4003 = CARTESIAN_POINT('',(-0.333878580729,-6.140950520833E-02,+ 1.6000001));+#4004 = CARTESIAN_POINT('',(-0.312573242188,-3.896484375E-02,1.6000001)+ );+#4005 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,+ 1.6000001));+#4006 = VECTOR('',#4007,1.);+#4007 = DIRECTION('',(0.,0.,1.));+#4008 = DEFINITIONAL_REPRESENTATION('',(#4009),#4015);+#4009 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4010,#4011,#4012,#4013,#4014),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4010 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4011 = CARTESIAN_POINT('',(0.749903094765,-5.00001E-02));+#4012 = CARTESIAN_POINT('',(0.499864630674,-5.00001E-02));+#4013 = CARTESIAN_POINT('',(0.249893875659,-5.00001E-02));+#4014 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4016 = ORIENTED_EDGE('',*,*,#4017,.F.);+#4017 = EDGE_CURVE('',#4018,#3982,#4020,.T.);+#4018 = VERTEX_POINT('',#4019);+#4019 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,1.55));+#4020 = SURFACE_CURVE('',#4021,(#4027,#4036),.PCURVE_S1.);+#4021 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4022,#4023,#4024,#4025,#4026),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4022 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,1.55));+#4023 = CARTESIAN_POINT('',(-0.277654192657,-1.026791900875E-03,1.55));+#4024 = CARTESIAN_POINT('',(-0.28232739695,-6.250812605268E-03,1.55));+#4025 = CARTESIAN_POINT('',(-0.288651688372,-1.316373927791E-02,1.55));+#4026 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,1.55));+#4027 = PCURVE('',#2112,#4028);+#4028 = DEFINITIONAL_REPRESENTATION('',(#4029),#4035);+#4029 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4030,#4031,#4032,#4033,#4034),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4030 = CARTESIAN_POINT('',(1.360126257711,-0.246010507076));+#4031 = CARTESIAN_POINT('',(1.361987316194,-0.2502700287));+#4032 = CARTESIAN_POINT('',(1.364648354468,-0.256754479794));+#4033 = CARTESIAN_POINT('',(1.368108489572,-0.265461527643));+#4034 = CARTESIAN_POINT('',(1.372365565147,-0.276385296703));+#4035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4036 = PCURVE('',#4037,#4044);+#4037 = SURFACE_OF_LINEAR_EXTRUSION('',#4038,#4042);+#4038 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4039,#4040,#4041),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4039 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,+ 1.6000001));+#4040 = CARTESIAN_POINT('',(-0.280672200521,-4.557291666667E-03,+ 1.6000001));+#4041 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,1.6000001+ ));+#4042 = VECTOR('',#4043,1.);+#4043 = DIRECTION('',(0.,0.,1.));+#4044 = DEFINITIONAL_REPRESENTATION('',(#4045),#4051);+#4045 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4046,#4047,#4048,#4049,#4050),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4046 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4047 = CARTESIAN_POINT('',(0.749900812915,-5.00001E-02));+#4048 = CARTESIAN_POINT('',(0.499845463533,-5.00001E-02));+#4049 = CARTESIAN_POINT('',(0.249867482859,-5.00001E-02));+#4050 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4052 = ORIENTED_EDGE('',*,*,#4053,.F.);+#4053 = EDGE_CURVE('',#4054,#4018,#4056,.T.);+#4054 = VERTEX_POINT('',#4055);+#4055 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,1.55));+#4056 = SURFACE_CURVE('',#4057,(#4063,#4072),.PCURVE_S1.);+#4057 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4058,#4059,#4060,#4061,#4062),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4058 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,1.55));+#4059 = CARTESIAN_POINT('',(-0.261247154268,2.070631071242E-02,1.55));+#4060 = CARTESIAN_POINT('',(-0.264475952828,1.552157602214E-02,1.55));+#4061 = CARTESIAN_POINT('',(-0.268938658215,9.454570050995E-03,1.55));+#4062 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,1.55));+#4063 = PCURVE('',#2112,#4064);+#4064 = DEFINITIONAL_REPRESENTATION('',(#4065),#4071);+#4065 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4066,#4067,#4068,#4069,#4070),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4066 = CARTESIAN_POINT('',(1.346592207157,-0.22235202962));+#4067 = CARTESIAN_POINT('',(1.349592563804,-0.226023611004));+#4068 = CARTESIAN_POINT('',(1.352848573231,-0.231191300677));+#4069 = CARTESIAN_POINT('',(1.356359954239,-0.237854220776));+#4070 = CARTESIAN_POINT('',(1.360126257711,-0.246010507076));+#4071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4072 = PCURVE('',#4073,#4080);+#4073 = SURFACE_OF_LINEAR_EXTRUSION('',#4074,#4078);+#4074 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4075,#4076,#4077),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4075 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,1.6000001+ ));+#4076 = CARTESIAN_POINT('',(-0.263240559896,1.640625E-02,1.6000001));+#4077 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,1.6000001+ ));+#4078 = VECTOR('',#4079,1.);+#4079 = DIRECTION('',(0.,0.,1.));+#4080 = DEFINITIONAL_REPRESENTATION('',(#4081),#4087);+#4081 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4082,#4083,#4084,#4085,#4086),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4082 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4083 = CARTESIAN_POINT('',(0.749948656737,-5.00001E-02));+#4084 = CARTESIAN_POINT('',(0.499922347432,-5.00001E-02));+#4085 = CARTESIAN_POINT('',(0.249934885207,-5.00001E-02));+#4086 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4088 = ORIENTED_EDGE('',*,*,#4089,.F.);+#4089 = EDGE_CURVE('',#4090,#4054,#4092,.T.);+#4090 = VERTEX_POINT('',#4091);+#4091 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,1.55));+#4092 = SURFACE_CURVE('',#4093,(#4099,#4108),.PCURVE_S1.);+#4093 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4094,#4095,#4096,#4097,#4098),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4094 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,1.55));+#4095 = CARTESIAN_POINT('',(-0.255265299479,3.81103356878E-02,1.55));+#4096 = CARTESIAN_POINT('',(-0.255929909203,3.367643373509E-02,1.55));+#4097 = CARTESIAN_POINT('',(-0.257259142956,2.930902082694E-02,1.55));+#4098 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,1.55));+#4099 = PCURVE('',#2112,#4100);+#4100 = DEFINITIONAL_REPRESENTATION('',(#4101),#4107);+#4101 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4102,#4103,#4104,#4105,#4106),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4102 = CARTESIAN_POINT('',(1.332494306236,-0.211082612344));+#4103 = CARTESIAN_POINT('',(1.336543530399,-0.213046500414));+#4104 = CARTESIAN_POINT('',(1.340242948366,-0.215579384012));+#4105 = CARTESIAN_POINT('',(1.343592509264,-0.218681254362));+#4106 = CARTESIAN_POINT('',(1.346592207157,-0.22235202962));+#4107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4108 = PCURVE('',#4109,#4116);+#4109 = SURFACE_OF_LINEAR_EXTRUSION('',#4110,#4114);+#4110 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4111,#4112,#4113),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4111 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,1.6000001+ ));+#4112 = CARTESIAN_POINT('',(-0.255265299479,3.361002604167E-02,1.6000001+ ));+#4113 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,1.6000001+ ));+#4114 = VECTOR('',#4115,1.);+#4115 = DIRECTION('',(0.,0.,1.));+#4116 = DEFINITIONAL_REPRESENTATION('',(#4117),#4123);+#4117 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4118,#4119,#4120,#4121,#4122),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4118 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4119 = CARTESIAN_POINT('',(0.749999118136,-5.00001E-02));+#4120 = CARTESIAN_POINT('',(0.499997040272,-5.00001E-02));+#4121 = CARTESIAN_POINT('',(0.249996442391,-5.00001E-02));+#4122 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4124 = ORIENTED_EDGE('',*,*,#4125,.F.);+#4125 = EDGE_CURVE('',#4126,#4090,#4128,.T.);+#4126 = VERTEX_POINT('',#4127);+#4127 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.55));+#4128 = SURFACE_CURVE('',#4129,(#4135,#4144),.PCURVE_S1.);+#4129 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4130,#4131,#4132,#4133,#4134),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4130 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.55));+#4131 = CARTESIAN_POINT('',(-0.259452180353,6.089668350173E-02,1.55));+#4132 = CARTESIAN_POINT('',(-0.25666068201,5.582639623572E-02,1.55));+#4133 = CARTESIAN_POINT('',(-0.255265299479,4.973071060795E-02,1.55));+#4134 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,1.55));+#4135 = PCURVE('',#2112,#4136);+#4136 = DEFINITIONAL_REPRESENTATION('',(#4137),#4143);+#4137 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4138,#4139,#4140,#4141,#4142),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4138 = CARTESIAN_POINT('',(1.308747713821,-0.208872390118));+#4139 = CARTESIAN_POINT('',(1.314214203194,-0.206870031786));+#4140 = CARTESIAN_POINT('',(1.319994413565,-0.206570959839));+#4141 = CARTESIAN_POINT('',(1.326087989636,-0.207975526086));+#4142 = CARTESIAN_POINT('',(1.332494306236,-0.211082612344));+#4143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4144 = PCURVE('',#4145,#4152);+#4145 = SURFACE_OF_LINEAR_EXTRUSION('',#4146,#4150);+#4146 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4147,#4148,#4149),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4147 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,1.6000001+ ));+#4148 = CARTESIAN_POINT('',(-0.255265299479,5.685221354167E-02,1.6000001+ ));+#4149 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.6000001));+#4150 = VECTOR('',#4151,1.);+#4151 = DIRECTION('',(0.,0.,1.));+#4152 = DEFINITIONAL_REPRESENTATION('',(#4153),#4159);+#4153 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4154,#4155,#4156,#4157,#4158),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4154 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4155 = CARTESIAN_POINT('',(0.749992187471,-5.00001E-02));+#4156 = CARTESIAN_POINT('',(0.499977590068,-5.00001E-02));+#4157 = CARTESIAN_POINT('',(0.249974205573,-5.00001E-02));+#4158 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4160 = ORIENTED_EDGE('',*,*,#4161,.F.);+#4161 = EDGE_CURVE('',#4162,#4126,#4164,.T.);+#4162 = VERTEX_POINT('',#4163);+#4163 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,1.55));+#4164 = SURFACE_CURVE('',#4165,(#4171,#4180),.PCURVE_S1.);+#4165 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4166,#4167,#4168,#4169,#4170),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4166 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,1.55));+#4167 = CARTESIAN_POINT('',(-0.279305827437,7.303059895833E-02,1.55));+#4168 = CARTESIAN_POINT('',(-0.273048749473,7.16827013767E-02,1.55));+#4169 = CARTESIAN_POINT('',(-0.267826512266,6.898617419263E-02,1.55));+#4170 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.55));+#4171 = PCURVE('',#2112,#4172);+#4172 = DEFINITIONAL_REPRESENTATION('',(#4173),#4179);+#4173 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4174,#4175,#4176,#4177,#4178),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4174 = CARTESIAN_POINT('',(1.291451107446,-0.225998471879));+#4175 = CARTESIAN_POINT('',(1.294632736683,-0.219438459536));+#4176 = CARTESIAN_POINT('',(1.29857602424,-0.214396799513));+#4177 = CARTESIAN_POINT('',(1.303281163366,-0.210874770822));+#4178 = CARTESIAN_POINT('',(1.308747713821,-0.208872390118));+#4179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4180 = PCURVE('',#4181,#4188);+#4181 = SURFACE_OF_LINEAR_EXTRUSION('',#4182,#4186);+#4182 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4183,#4184,#4185),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4183 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.6000001));+#4184 = CARTESIAN_POINT('',(-0.272013346354,7.303059895833E-02,1.6000001+ ));+#4185 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,1.6000001+ ));+#4186 = VECTOR('',#4187,1.);+#4187 = DIRECTION('',(0.,0.,1.));+#4188 = DEFINITIONAL_REPRESENTATION('',(#4189),#4195);+#4189 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4190,#4191,#4192,#4193,#4194),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4190 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4191 = CARTESIAN_POINT('',(0.750027922835,-5.00001E-02));+#4192 = CARTESIAN_POINT('',(0.500025691689,-5.00001E-02));+#4193 = CARTESIAN_POINT('',(0.250010606031,-5.00001E-02));+#4194 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4196 = ORIENTED_EDGE('',*,*,#4197,.F.);+#4197 = EDGE_CURVE('',#4198,#4162,#4200,.T.);+#4198 = VERTEX_POINT('',#4199);+#4199 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,1.55));+#4200 = SURFACE_CURVE('',#4201,(#4207,#4216),.PCURVE_S1.);+#4201 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4202,#4203,#4204,#4205,#4206),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4202 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,1.55));+#4203 = CARTESIAN_POINT('',(-0.30266136916,7.115063815124E-02,1.55));+#4204 = CARTESIAN_POINT('',(-0.297135679205,7.240393203374E-02,1.55));+#4205 = CARTESIAN_POINT('',(-0.291780761592,7.303059895833E-02,1.55));+#4206 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,1.55));+#4207 = PCURVE('',#2112,#4208);+#4208 = DEFINITIONAL_REPRESENTATION('',(#4209),#4215);+#4209 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4210,#4211,#4212,#4213,#4214),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4210 = CARTESIAN_POINT('',(1.285337756247,-0.247218906428));+#4211 = CARTESIAN_POINT('',(1.286132206681,-0.24127321558));+#4212 = CARTESIAN_POINT('',(1.287415880119,-0.235754503997));+#4213 = CARTESIAN_POINT('',(1.289188844271,-0.230662897944));+#4214 = CARTESIAN_POINT('',(1.291451107446,-0.225998471879));+#4215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4216 = PCURVE('',#4217,#4224);+#4217 = SURFACE_OF_LINEAR_EXTRUSION('',#4218,#4222);+#4218 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4219,#4220,#4221),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4219 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,1.6000001+ ));+#4220 = CARTESIAN_POINT('',(-0.296964518229,7.303059895833E-02,1.6000001+ ));+#4221 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,1.6000001+ ));+#4222 = VECTOR('',#4223,1.);+#4223 = DIRECTION('',(0.,0.,1.));+#4224 = DEFINITIONAL_REPRESENTATION('',(#4225),#4231);+#4225 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4226,#4227,#4228,#4229,#4230),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4226 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4227 = CARTESIAN_POINT('',(0.750010372268,-5.00001E-02));+#4228 = CARTESIAN_POINT('',(0.500012144046,-5.00001E-02));+#4229 = CARTESIAN_POINT('',(0.250007843185,-5.00001E-02));+#4230 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4232 = ORIENTED_EDGE('',*,*,#4233,.F.);+#4233 = EDGE_CURVE('',#4234,#4198,#4236,.T.);+#4234 = VERTEX_POINT('',#4235);+#4235 = CARTESIAN_POINT('',(-0.332511393229,5.787760416667E-02,1.55));+#4236 = SURFACE_CURVE('',#4237,(#4243,#4252),.PCURVE_S1.);+#4237 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4238,#4239,#4240,#4241,#4242),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4238 = CARTESIAN_POINT('',(-0.332511393229,5.787760416667E-02,1.55));+#4239 = CARTESIAN_POINT('',(-0.32613171262,6.169402024531E-02,1.55));+#4240 = CARTESIAN_POINT('',(-0.319979459359,6.486516581683E-02,1.55));+#4241 = CARTESIAN_POINT('',(-0.314054769212,6.739081613405E-02,1.55));+#4242 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,1.55));+#4243 = PCURVE('',#2112,#4244);+#4244 = DEFINITIONAL_REPRESENTATION('',(#4245),#4251);+#4245 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4246,#4247,#4248,#4249,#4250),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4246 = CARTESIAN_POINT('',(1.285048596389,-0.273923225638));+#4247 = CARTESIAN_POINT('',(1.284398746677,-0.266517616162));+#4248 = CARTESIAN_POINT('',(1.284230238909,-0.25959822388));+#4249 = CARTESIAN_POINT('',(1.284543216056,-0.253165269025));+#4250 = CARTESIAN_POINT('',(1.285337756247,-0.247218906428));+#4251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4252 = PCURVE('',#4253,#4260);+#4253 = SURFACE_OF_LINEAR_EXTRUSION('',#4254,#4258);+#4254 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4255,#4256,#4257),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4255 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,1.6000001+ ));+#4256 = CARTESIAN_POINT('',(-0.319750976563,6.551106770833E-02,1.6000001+ ));+#4257 = CARTESIAN_POINT('',(-0.332511393229,5.787760416667E-02,1.6000001+ ));+#4258 = VECTOR('',#4259,1.);+#4259 = DIRECTION('',(0.,0.,1.));+#4260 = DEFINITIONAL_REPRESENTATION('',(#4261),#4267);+#4261 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4262,#4263,#4264,#4265,#4266),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4262 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4263 = CARTESIAN_POINT('',(0.750020678175,-5.00001E-02));+#4264 = CARTESIAN_POINT('',(0.500025700865,-5.00001E-02));+#4265 = CARTESIAN_POINT('',(0.250017871697,-5.00001E-02));+#4266 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4268 = ORIENTED_EDGE('',*,*,#4269,.T.);+#4269 = EDGE_CURVE('',#4234,#4270,#4272,.T.);+#4270 = VERTEX_POINT('',#4271);+#4271 = CARTESIAN_POINT('',(-0.332511393229,8.111979166667E-02,1.55));+#4272 = SURFACE_CURVE('',#4273,(#4277,#4284),.PCURVE_S1.);+#4273 = LINE('',#4274,#4275);+#4274 = CARTESIAN_POINT('',(-0.332511393229,0.695763030805,1.55));+#4275 = VECTOR('',#4276,1.);+#4276 = DIRECTION('',(0.,1.,0.));+#4277 = PCURVE('',#2112,#4278);+#4278 = DEFINITIONAL_REPRESENTATION('',(#4279),#4283);+#4279 = LINE('',#4280,#4281);+#4280 = CARTESIAN_POINT('',(0.711105231712,4.441340462493E-03));+#4281 = VECTOR('',#4282,1.);+#4282 = DIRECTION('',(-0.899759330922,0.436386464522));+#4283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4284 = PCURVE('',#4285,#4290);+#4285 = PLANE('',#4286);+#4286 = AXIS2_PLACEMENT_3D('',#4287,#4288,#4289);+#4287 = CARTESIAN_POINT('',(-0.332511393229,5.787760416667E-02,1.6000001+ ));+#4288 = DIRECTION('',(1.,0.,0.));+#4289 = DIRECTION('',(0.,1.,0.));+#4290 = DEFINITIONAL_REPRESENTATION('',(#4291),#4294);+#4291 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4292,#4293),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.637885426638,-0.614643239138),.PIECEWISE_BEZIER_KNOTS.);+#4292 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4293 = CARTESIAN_POINT('',(2.32421875E-02,-5.00001E-02));+#4294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4295 = ORIENTED_EDGE('',*,*,#4296,.F.);+#4296 = EDGE_CURVE('',#4297,#4270,#4299,.T.);+#4297 = VERTEX_POINT('',#4298);+#4298 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.55));+#4299 = SURFACE_CURVE('',#4300,(#4306,#4315),.PCURVE_S1.);+#4300 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4301,#4302,#4303,#4304,#4305),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4301 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.55));+#4302 = CARTESIAN_POINT('',(-0.315108403972,8.812658531913E-02,1.55));+#4303 = CARTESIAN_POINT('',(-0.320843075248,8.624665651966E-02,1.55));+#4304 = CARTESIAN_POINT('',(-0.326644084257,8.391103574069E-02,1.55));+#4305 = CARTESIAN_POINT('',(-0.332511393229,8.111979166667E-02,1.55));+#4306 = PCURVE('',#2112,#4307);+#4307 = DEFINITIONAL_REPRESENTATION('',(#4308),#4314);+#4308 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4309,#4310,#4311,#4312,#4313),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4309 = CARTESIAN_POINT('',(1.266618358034,-0.23934287226));+#4310 = CARTESIAN_POINT('',(1.2654262223,-0.245064477727));+#4311 = CARTESIAN_POINT('',(1.264615172855,-0.251044677201));+#4312 = CARTESIAN_POINT('',(1.264185187633,-0.257283422479));+#4313 = CARTESIAN_POINT('',(1.264136221315,-0.263780649607));+#4314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4315 = PCURVE('',#4316,#4323);+#4316 = SURFACE_OF_LINEAR_EXTRUSION('',#4317,#4321);+#4317 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4318,#4319,#4320),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4318 = CARTESIAN_POINT('',(-0.332511393229,8.111979166667E-02,1.6000001+ ));+#4319 = CARTESIAN_POINT('',(-0.320776367188,8.670247395833E-02,1.6000001+ ));+#4320 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.6000001));+#4321 = VECTOR('',#4322,1.);+#4322 = DIRECTION('',(0.,0.,1.));+#4323 = DEFINITIONAL_REPRESENTATION('',(#4324),#4330);+#4324 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4325,#4326,#4327,#4328,#4329),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4325 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4326 = CARTESIAN_POINT('',(0.749992577163,-5.00001E-02));+#4327 = CARTESIAN_POINT('',(0.499989255261,-5.00001E-02));+#4328 = CARTESIAN_POINT('',(0.249991305989,-5.00001E-02));+#4329 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4331 = ORIENTED_EDGE('',*,*,#4332,.F.);+#4332 = EDGE_CURVE('',#4333,#4297,#4335,.T.);+#4333 = VERTEX_POINT('',#4334);+#4334 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,1.55));+#4335 = SURFACE_CURVE('',#4336,(#4342,#4351),.PCURVE_S1.);+#4336 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4337,#4338,#4339,#4340,#4341),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4337 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,1.55));+#4338 = CARTESIAN_POINT('',(-0.29257818994,9.239908854167E-02,1.55));+#4339 = CARTESIAN_POINT('',(-0.29815142075,9.192435950126E-02,1.55));+#4340 = CARTESIAN_POINT('',(-0.303772070214,9.097491038375E-02,1.55));+#4341 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.55));+#4342 = PCURVE('',#2112,#4343);+#4343 = DEFINITIONAL_REPRESENTATION('',(#4344),#4350);+#4344 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4345,#4346,#4347,#4348,#4349),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4345 = CARTESIAN_POINT('',(1.273825254177,-0.217956371756));+#4346 = CARTESIAN_POINT('',(1.271413878105,-0.222928244849));+#4347 = CARTESIAN_POINT('',(1.2694089375,-0.228149976601));+#4348 = CARTESIAN_POINT('',(1.267810437855,-0.233621535146));+#4349 = CARTESIAN_POINT('',(1.266618358034,-0.23934287226));+#4350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4351 = PCURVE('',#4352,#4359);+#4352 = SURFACE_OF_LINEAR_EXTRUSION('',#4353,#4357);+#4353 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4354,#4355,#4356),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4354 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.6000001));+#4355 = CARTESIAN_POINT('',(-0.298103841146,9.239908854167E-02,1.6000001+ ));+#4356 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,1.6000001+ ));+#4357 = VECTOR('',#4358,1.);+#4358 = DIRECTION('',(0.,0.,1.));+#4359 = DEFINITIONAL_REPRESENTATION('',(#4360),#4366);+#4360 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4361,#4362,#4363,#4364,#4365),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4361 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4362 = CARTESIAN_POINT('',(0.749997061905,-5.00001E-02));+#4363 = CARTESIAN_POINT('',(0.499995172575,-5.00001E-02));+#4364 = CARTESIAN_POINT('',(0.249995697078,-5.00001E-02));+#4365 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4367 = ORIENTED_EDGE('',*,*,#4368,.F.);+#4368 = EDGE_CURVE('',#4369,#4333,#4371,.T.);+#4369 = VERTEX_POINT('',#4370);+#4370 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.55));+#4371 = SURFACE_CURVE('',#4372,(#4378,#4387),.PCURVE_S1.);+#4372 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4373,#4374,#4375,#4376,#4377),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4373 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.55));+#4374 = CARTESIAN_POINT('',(-0.254497203006,8.576335851979E-02,1.55));+#4375 = CARTESIAN_POINT('',(-0.263727353862,9.018825179101E-02,1.55));+#4376 = CARTESIAN_POINT('',(-0.274580624285,9.239908854167E-02,1.55));+#4377 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,1.55));+#4378 = PCURVE('',#2112,#4379);+#4379 = DEFINITIONAL_REPRESENTATION('',(#4380),#4386);+#4380 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4381,#4382,#4383,#4384,#4385),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4381 = CARTESIAN_POINT('',(1.30329363529,-0.187613224178));+#4382 = CARTESIAN_POINT('',(1.294002465364,-0.191560264288));+#4383 = CARTESIAN_POINT('',(1.285993213456,-0.197934215116));+#4384 = CARTESIAN_POINT('',(1.279267772152,-0.206734767217));+#4385 = CARTESIAN_POINT('',(1.273825254177,-0.217956371756));+#4386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4387 = PCURVE('',#4388,#4395);+#4388 = SURFACE_OF_LINEAR_EXTRUSION('',#4389,#4393);+#4389 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4390,#4391,#4392),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4390 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,1.6000001+ ));+#4391 = CARTESIAN_POINT('',(-0.262101236979,9.239908854167E-02,1.6000001+ ));+#4392 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.6000001)+ );+#4393 = VECTOR('',#4394,1.);+#4394 = DIRECTION('',(0.,0.,1.));+#4395 = DEFINITIONAL_REPRESENTATION('',(#4396),#4402);+#4396 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4397,#4398,#4399,#4400,#4401),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4397 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4398 = CARTESIAN_POINT('',(0.74996888568,-5.00001E-02));+#4399 = CARTESIAN_POINT('',(0.499928431087,-5.00001E-02));+#4400 = CARTESIAN_POINT('',(0.249923823855,-5.00001E-02));+#4401 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4403 = ORIENTED_EDGE('',*,*,#4404,.F.);+#4404 = EDGE_CURVE('',#4405,#4369,#4407,.T.);+#4405 = VERTEX_POINT('',#4406);+#4406 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,1.55));+#4407 = SURFACE_CURVE('',#4408,(#4417,#4429),.PCURVE_S1.);+#4408 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4409,#4410,#4411,#4412,#4413,+ #4414,#4415,#4416),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.592009112148,+ 1.),.UNSPECIFIED.);+#4409 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,1.55));+#4410 = CARTESIAN_POINT('',(-0.231681315104,5.069259499153E-02,1.55));+#4411 = CARTESIAN_POINT('',(-0.232569489642,5.658407955875E-02,1.55));+#4412 = CARTESIAN_POINT('',(-0.234346399075,6.199336622599E-02,1.55));+#4413 = CARTESIAN_POINT('',(-0.238848795617,7.031543939668E-02,1.55));+#4414 = CARTESIAN_POINT('',(-0.241107745723,7.348158739119E-02,1.55));+#4415 = CARTESIAN_POINT('',(-0.24378864868,7.641844032524E-02,1.55));+#4416 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.55));+#4417 = PCURVE('',#2112,#4418);+#4418 = DEFINITIONAL_REPRESENTATION('',(#4419),#4428);+#4419 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4420,#4421,#4422,#4423,#4424,+ #4425,#4426,#4427),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.592009112148,+ 1.),.UNSPECIFIED.);+#4420 = CARTESIAN_POINT('',(1.341248363159,-0.189116924692));+#4421 = CARTESIAN_POINT('',(1.335514256747,-0.186335862759));+#4422 = CARTESIAN_POINT('',(1.329825751188,-0.184564041966));+#4423 = CARTESIAN_POINT('',(1.324183275811,-0.183802293324));+#4424 = CARTESIAN_POINT('',(1.314730627914,-0.184221726536));+#4425 = CARTESIAN_POINT('',(1.310896081463,-0.184872573843));+#4426 = CARTESIAN_POINT('',(1.307083710869,-0.186003138424));+#4427 = CARTESIAN_POINT('',(1.30329363529,-0.187613224178));+#4428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4429 = PCURVE('',#4430,#4437);+#4430 = SURFACE_OF_LINEAR_EXTRUSION('',#4431,#4435);+#4431 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4432,#4433,#4434),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4432 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.6000001)+ );+#4433 = CARTESIAN_POINT('',(-0.231681315104,6.585286458333E-02,1.6000001+ ));+#4434 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,1.6000001+ ));+#4435 = VECTOR('',#4436,1.);+#4436 = DIRECTION('',(0.,0.,1.));+#4437 = DEFINITIONAL_REPRESENTATION('',(#4438),#4447);+#4438 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4439,#4440,#4441,#4442,#4443,+ #4444,#4445,#4446),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.592009112148,+ 1.),.UNSPECIFIED.);+#4439 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4440 = CARTESIAN_POINT('',(0.852020772381,-5.00001E-02));+#4441 = CARTESIAN_POINT('',(0.704020809071,-5.00001E-02));+#4442 = CARTESIAN_POINT('',(0.556010434143,-5.00001E-02));+#4443 = CARTESIAN_POINT('',(0.305996657149,-5.00001E-02));+#4444 = CARTESIAN_POINT('',(0.203993285287,-5.00001E-02));+#4445 = CARTESIAN_POINT('',(0.101993271868,-5.00001E-02));+#4446 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4448 = ORIENTED_EDGE('',*,*,#4449,.F.);+#4449 = EDGE_CURVE('',#4450,#4405,#4452,.T.);+#4450 = VERTEX_POINT('',#4451);+#4451 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,1.55));+#4452 = SURFACE_CURVE('',#4453,(#4459,#4468),.PCURVE_S1.);+#4453 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4454,#4455,#4456,#4457,#4458),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4454 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,1.55));+#4455 = CARTESIAN_POINT('',(-0.234216395427,2.791322413319E-02,1.55));+#4456 = CARTESIAN_POINT('',(-0.232526341883,3.338197411825E-02,1.55));+#4457 = CARTESIAN_POINT('',(-0.231681315104,3.88508177902E-02,1.55));+#4458 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,1.55));+#4459 = PCURVE('',#2112,#4460);+#4460 = DEFINITIONAL_REPRESENTATION('',(#4461),#4467);+#4461 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4462,#4463,#4464,#4465,#4466),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4462 = CARTESIAN_POINT('',(1.35871812483,-0.203224646696));+#4463 = CARTESIAN_POINT('',(1.35490393349,-0.198557434047));+#4464 = CARTESIAN_POINT('',(1.350720891154,-0.19465030413));+#4465 = CARTESIAN_POINT('',(1.346169006279,-0.191503454046));+#4466 = CARTESIAN_POINT('',(1.341248363159,-0.189116924692));+#4467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4468 = PCURVE('',#4469,#4476);+#4469 = SURFACE_OF_LINEAR_EXTRUSION('',#4470,#4474);+#4470 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4471,#4472,#4473),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4471 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,1.6000001+ ));+#4472 = CARTESIAN_POINT('',(-0.231681315104,3.338216145833E-02,1.6000001+ ));+#4473 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,1.6000001+ ));+#4474 = VECTOR('',#4475,1.);+#4475 = DIRECTION('',(0.,0.,1.));+#4476 = DEFINITIONAL_REPRESENTATION('',(#4477),#4483);+#4477 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4478,#4479,#4480,#4481,#4482),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4478 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4479 = CARTESIAN_POINT('',(0.750008563435,-5.00001E-02));+#4480 = CARTESIAN_POINT('',(0.500008564118,-5.00001E-02));+#4481 = CARTESIAN_POINT('',(0.250004281972,-5.00001E-02));+#4482 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4484 = ORIENTED_EDGE('',*,*,#4485,.F.);+#4485 = EDGE_CURVE('',#4486,#4450,#4488,.T.);+#4486 = VERTEX_POINT('',#4487);+#4487 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.55));+#4488 = SURFACE_CURVE('',#4489,(#4495,#4504),.PCURVE_S1.);+#4489 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4490,#4491,#4492,#4493,#4494),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4490 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.55));+#4491 = CARTESIAN_POINT('',(-0.247518894884,4.897938705336E-03,1.55));+#4492 = CARTESIAN_POINT('',(-0.242876003744,1.112611833244E-02,1.55));+#4493 = CARTESIAN_POINT('',(-0.239286660564,1.697512406078E-02,1.55));+#4494 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,1.55));+#4495 = PCURVE('',#2112,#4496);+#4496 = DEFINITIONAL_REPRESENTATION('',(#4497),#4503);+#4497 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4498,#4499,#4500,#4501,#4502),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4498 = CARTESIAN_POINT('',(1.373266268356,-0.228577903151));+#4499 = CARTESIAN_POINT('',(1.369807120601,-0.220570041096));+#4500 = CARTESIAN_POINT('',(1.366229352716,-0.213674663183));+#4501 = CARTESIAN_POINT('',(1.362532996016,-0.207892691234));+#4502 = CARTESIAN_POINT('',(1.35871812483,-0.203224646696));+#4503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4504 = PCURVE('',#4505,#4512);+#4505 = SURFACE_OF_LINEAR_EXTRUSION('',#4506,#4510);+#4506 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4507,#4508,#4509),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4507 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,1.6000001+ ));+#4508 = CARTESIAN_POINT('',(-0.241821289063,1.150716145833E-02,1.6000001+ ));+#4509 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.6000001)+ );+#4510 = VECTOR('',#4511,1.);+#4511 = DIRECTION('',(0.,0.,1.));+#4512 = DEFINITIONAL_REPRESENTATION('',(#4513),#4519);+#4513 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4514,#4515,#4516,#4517,#4518),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4514 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4515 = CARTESIAN_POINT('',(0.750043501197,-5.00001E-02));+#4516 = CARTESIAN_POINT('',(0.500053002884,-5.00001E-02));+#4517 = CARTESIAN_POINT('',(0.250035995317,-5.00001E-02));+#4518 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4520 = ORIENTED_EDGE('',*,*,#4521,.F.);+#4521 = EDGE_CURVE('',#3838,#4486,#4522,.T.);+#4522 = SURFACE_CURVE('',#4523,(#4529,#4538),.PCURVE_S1.);+#4523 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4524,#4525,#4526,#4527,#4528),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4524 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.55));+#4525 = CARTESIAN_POINT('',(-0.265663107029,-1.566729463481E-02,1.55));+#4526 = CARTESIAN_POINT('',(-0.260554992355,-1.006550351377E-02,1.55));+#4527 = CARTESIAN_POINT('',(-0.256405264847,-5.412529556566E-03,1.55));+#4528 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.55));+#4529 = PCURVE('',#2112,#4530);+#4530 = DEFINITIONAL_REPRESENTATION('',(#4531),#4537);+#4531 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4532,#4533,#4534,#4535,#4536),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4532 = CARTESIAN_POINT('',(1.383639106142,-0.254185376852));+#4533 = CARTESIAN_POINT('',(1.380392992602,-0.245869854745));+#4534 = CARTESIAN_POINT('',(1.377581840873,-0.238829235082));+#4535 = CARTESIAN_POINT('',(1.375206169055,-0.233064984181));+#4536 = CARTESIAN_POINT('',(1.373266268356,-0.228577903151));+#4537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4538 = PCURVE('',#4539,#4546);+#4539 = SURFACE_OF_LINEAR_EXTRUSION('',#4540,#4544);+#4540 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4541,#4542,#4543),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4541 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.6000001)+ );+#4542 = CARTESIAN_POINT('',(-0.259594726563,-9.114583333333E-03,+ 1.6000001));+#4543 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.6000001)+ );+#4544 = VECTOR('',#4545,1.);+#4545 = DIRECTION('',(0.,0.,1.));+#4546 = DEFINITIONAL_REPRESENTATION('',(#4547),#4553);+#4547 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4548,#4549,#4550,#4551,#4552),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4548 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4549 = CARTESIAN_POINT('',(0.750061231281,-5.00001E-02));+#4550 = CARTESIAN_POINT('',(0.500074396241,-5.00001E-02));+#4551 = CARTESIAN_POINT('',(0.250050347204,-5.00001E-02));+#4552 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4554 = FACE_BOUND('',#4555,.T.);+#4555 = EDGE_LOOP('',(#4556,#4594,#4621,#4648,#4675,#4702,#4729,#4765,+ #4801,#4846,#4882,#4927,#4963,#4999,#5035,#5062,#5098,#5134,#5170,+ #5206,#5242,#5278));+#4556 = ORIENTED_EDGE('',*,*,#4557,.F.);+#4557 = EDGE_CURVE('',#4558,#4560,#4562,.T.);+#4558 = VERTEX_POINT('',#4559);+#4559 = CARTESIAN_POINT('',(-0.187133789062,3.873697916667E-03,1.55));+#4560 = VERTEX_POINT('',#4561);+#4561 = CARTESIAN_POINT('',(-0.170385742187,1.019694010417E-02,1.55));+#4562 = SURFACE_CURVE('',#4563,(#4569,#4578),.PCURVE_S1.);+#4563 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4564,#4565,#4566,#4567,#4568),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4564 = CARTESIAN_POINT('',(-0.187133789063,3.873697916667E-03,1.55));+#4565 = CARTESIAN_POINT('',(-0.183146165486,5.981441807034E-03,1.55));+#4566 = CARTESIAN_POINT('',(-0.179025607926,7.737902726318E-03,1.55));+#4567 = CARTESIAN_POINT('',(-0.174772127865,9.143068220536E-03,1.55));+#4568 = CARTESIAN_POINT('',(-0.170385742188,1.019694010417E-02,1.55));+#4569 = PCURVE('',#2112,#4570);+#4570 = DEFINITIONAL_REPRESENTATION('',(#4571),#4577);+#4571 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4572,#4573,#4574,#4575,#4576),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4572 = CARTESIAN_POINT('',(1.397079933646,-0.166684943501));+#4573 = CARTESIAN_POINT('',(1.396923616368,-0.162177251076));+#4574 = CARTESIAN_POINT('',(1.397141379812,-0.157703245191));+#4575 = CARTESIAN_POINT('',(1.397733230173,-0.153262941616));+#4576 = CARTESIAN_POINT('',(1.39869915845,-0.148856354748));+#4577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4578 = PCURVE('',#4579,#4586);+#4579 = SURFACE_OF_LINEAR_EXTRUSION('',#4580,#4584);+#4580 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4581,#4582,#4583),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4581 = CARTESIAN_POINT('',(-0.170385742187,1.019694010417E-02,1.6000001+ ));+#4582 = CARTESIAN_POINT('',(-0.179158528646,8.089192708333E-03,1.6000001+ ));+#4583 = CARTESIAN_POINT('',(-0.187133789062,3.873697916667E-03,1.6000001+ ));+#4584 = VECTOR('',#4585,1.);+#4585 = DIRECTION('',(0.,0.,1.));+#4586 = DEFINITIONAL_REPRESENTATION('',(#4587),#4593);+#4587 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4588,#4589,#4590,#4591,#4592),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4588 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4589 = CARTESIAN_POINT('',(0.750000415783,-5.00001E-02));+#4590 = CARTESIAN_POINT('',(0.499999990255,-5.00001E-02));+#4591 = CARTESIAN_POINT('',(0.249999569615,-5.00001E-02));+#4592 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4594 = ORIENTED_EDGE('',*,*,#4595,.T.);+#4595 = EDGE_CURVE('',#4558,#4596,#4598,.T.);+#4596 = VERTEX_POINT('',#4597);+#4597 = CARTESIAN_POINT('',(-0.187133789062,8.932291666667E-02,1.55));+#4598 = SURFACE_CURVE('',#4599,(#4603,#4610),.PCURVE_S1.);+#4599 = LINE('',#4600,#4601);+#4600 = CARTESIAN_POINT('',(-0.187133789062,0.66876107768,1.55));+#4601 = VECTOR('',#4602,1.);+#4602 = DIRECTION('',(0.,1.,0.));+#4603 = PCURVE('',#2112,#4604);+#4604 = DEFINITIONAL_REPRESENTATION('',(#4605),#4609);+#4605 = LINE('',#4606,#4607);+#4606 = CARTESIAN_POINT('',(0.798841309692,0.123462909459));+#4607 = VECTOR('',#4608,1.);+#4608 = DIRECTION('',(-0.899759330922,0.436386464522));+#4609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4610 = PCURVE('',#4611,#4616);+#4611 = PLANE('',#4612);+#4612 = AXIS2_PLACEMENT_3D('',#4613,#4614,#4615);+#4613 = CARTESIAN_POINT('',(-0.187133789062,3.873697916667E-03,1.6000001+ ));+#4614 = DIRECTION('',(1.,0.,0.));+#4615 = DIRECTION('',(0.,1.,0.));+#4616 = DEFINITIONAL_REPRESENTATION('',(#4617),#4620);+#4617 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4618,#4619),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.664887379763,-0.579438161013),.PIECEWISE_BEZIER_KNOTS.);+#4618 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4619 = CARTESIAN_POINT('',(8.544921875E-02,-5.00001E-02));+#4620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4621 = ORIENTED_EDGE('',*,*,#4622,.T.);+#4622 = EDGE_CURVE('',#4596,#4623,#4625,.T.);+#4623 = VERTEX_POINT('',#4624);+#4624 = CARTESIAN_POINT('',(-0.101000976562,8.932291666667E-02,1.55));+#4625 = SURFACE_CURVE('',#4626,(#4630,#4637),.PCURVE_S1.);+#4626 = LINE('',#4627,#4628);+#4627 = CARTESIAN_POINT('',(-0.416979008892,8.932291666667E-02,1.55));+#4628 = VECTOR('',#4629,1.);+#4629 = DIRECTION('',(1.,0.,-0.));+#4630 = PCURVE('',#2112,#4631);+#4631 = DEFINITIONAL_REPRESENTATION('',(#4632),#4636);+#4632 = LINE('',#4633,#4634);+#4633 = CARTESIAN_POINT('',(1.219894858887,-0.336201442244));+#4634 = VECTOR('',#4635,1.);+#4635 = DIRECTION('',(0.436386464522,0.899759330922));+#4636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4637 = PCURVE('',#4638,#4643);+#4638 = PLANE('',#4639);+#4639 = AXIS2_PLACEMENT_3D('',#4640,#4641,#4642);+#4640 = CARTESIAN_POINT('',(-0.187133789062,8.932291666667E-02,1.6000001+ ));+#4641 = DIRECTION('',(0.,-1.,0.));+#4642 = DIRECTION('',(1.,0.,0.));+#4643 = DEFINITIONAL_REPRESENTATION('',(#4644),#4647);+#4644 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4645,#4646),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.22984521983,0.31597803233),.PIECEWISE_BEZIER_KNOTS.);+#4645 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4646 = CARTESIAN_POINT('',(8.61328125E-02,-5.00001E-02));+#4647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4648 = ORIENTED_EDGE('',*,*,#4649,.T.);+#4649 = EDGE_CURVE('',#4623,#4650,#4652,.T.);+#4650 = VERTEX_POINT('',#4651);+#4651 = CARTESIAN_POINT('',(-0.101000976562,6.995442708333E-02,1.55));+#4652 = SURFACE_CURVE('',#4653,(#4657,#4664),.PCURVE_S1.);+#4653 = LINE('',#4654,#4655);+#4654 = CARTESIAN_POINT('',(-0.101000976562,0.711485687055,1.55));+#4655 = VECTOR('',#4656,1.);+#4656 = DIRECTION('',(0.,-1.,0.));+#4657 = PCURVE('',#2112,#4658);+#4658 = DEFINITIONAL_REPRESENTATION('',(#4659),#4663);+#4659 = LINE('',#4660,#4661);+#4660 = CARTESIAN_POINT('',(0.797986637273,0.219606152438));+#4661 = VECTOR('',#4662,1.);+#4662 = DIRECTION('',(0.899759330922,-0.436386464522));+#4663 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4664 = PCURVE('',#4665,#4670);+#4665 = PLANE('',#4666);+#4666 = AXIS2_PLACEMENT_3D('',#4667,#4668,#4669);+#4667 = CARTESIAN_POINT('',(-0.101000976562,8.932291666667E-02,1.6000001+ ));+#4668 = DIRECTION('',(-1.,0.,0.));+#4669 = DIRECTION('',(0.,-1.,0.));+#4670 = DEFINITIONAL_REPRESENTATION('',(#4671),#4674);+#4671 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4672,#4673),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.622162770388,0.641531259971),.PIECEWISE_BEZIER_KNOTS.);+#4672 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4673 = CARTESIAN_POINT('',(1.936848958333E-02,-5.00001E-02));+#4674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4675 = ORIENTED_EDGE('',*,*,#4676,.T.);+#4676 = EDGE_CURVE('',#4650,#4677,#4679,.T.);+#4677 = VERTEX_POINT('',#4678);+#4678 = CARTESIAN_POINT('',(-0.166170247396,6.995442708333E-02,1.55));+#4679 = SURFACE_CURVE('',#4680,(#4684,#4691),.PCURVE_S1.);+#4680 = LINE('',#4681,#4682);+#4681 = CARTESIAN_POINT('',(-0.373912602642,6.995442708333E-02,1.55));+#4682 = VECTOR('',#4683,1.);+#4683 = DIRECTION('',(-1.,0.,0.));+#4684 = PCURVE('',#2112,#4685);+#4685 = DEFINITIONAL_REPRESENTATION('',(#4686),#4690);+#4686 = LINE('',#4687,#4688);+#4687 = CARTESIAN_POINT('',(1.256115434879,-0.305904188064));+#4688 = VECTOR('',#4689,1.);+#4689 = DIRECTION('',(-0.436386464522,-0.899759330922));+#4690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4691 = PCURVE('',#4692,#4697);+#4692 = PLANE('',#4693);+#4693 = AXIS2_PLACEMENT_3D('',#4694,#4695,#4696);+#4694 = CARTESIAN_POINT('',(-0.101000976562,6.995442708333E-02,1.6000001+ ));+#4695 = DIRECTION('',(0.,1.,0.));+#4696 = DIRECTION('',(-1.,0.,0.));+#4697 = DEFINITIONAL_REPRESENTATION('',(#4698),#4701);+#4698 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4699,#4700),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.27291162608,-0.207742355246),.PIECEWISE_BEZIER_KNOTS.);+#4699 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4700 = CARTESIAN_POINT('',(6.516927083333E-02,-5.00001E-02));+#4701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4702 = ORIENTED_EDGE('',*,*,#4703,.T.);+#4703 = EDGE_CURVE('',#4677,#4704,#4706,.T.);+#4704 = VERTEX_POINT('',#4705);+#4705 = CARTESIAN_POINT('',(-0.166170247396,2.814127604167E-02,1.55));+#4706 = SURFACE_CURVE('',#4707,(#4711,#4718),.PCURVE_S1.);+#4707 = LINE('',#4708,#4709);+#4708 = CARTESIAN_POINT('',(-0.166170247396,0.701801442263,1.55));+#4709 = VECTOR('',#4710,1.);+#4710 = DIRECTION('',(0.,-1.,0.));+#4711 = PCURVE('',#2112,#4712);+#4712 = DEFINITIONAL_REPRESENTATION('',(#4713),#4717);+#4713 = LINE('',#4714,#4715);+#4714 = CARTESIAN_POINT('',(0.778261139193,0.15674341957));+#4715 = VECTOR('',#4716,1.);+#4716 = DIRECTION('',(0.899759330922,-0.436386464522));+#4717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4718 = PCURVE('',#4719,#4724);+#4719 = PLANE('',#4720);+#4720 = AXIS2_PLACEMENT_3D('',#4721,#4722,#4723);+#4721 = CARTESIAN_POINT('',(-0.166170247396,6.995442708333E-02,1.6000001+ ));+#4722 = DIRECTION('',(-1.,0.,0.));+#4723 = DIRECTION('',(0.,-1.,0.));+#4724 = DEFINITIONAL_REPRESENTATION('',(#4725),#4728);+#4725 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4726,#4727),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.63184701518,0.673660166222),.PIECEWISE_BEZIER_KNOTS.);+#4726 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4727 = CARTESIAN_POINT('',(4.181315104167E-02,-5.00001E-02));+#4728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4729 = ORIENTED_EDGE('',*,*,#4730,.F.);+#4730 = EDGE_CURVE('',#4731,#4704,#4733,.T.);+#4731 = VERTEX_POINT('',#4732);+#4732 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,1.55));+#4733 = SURFACE_CURVE('',#4734,(#4740,#4749),.PCURVE_S1.);+#4734 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4735,#4736,#4737,#4738,#4739),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4735 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,1.55));+#4736 = CARTESIAN_POINT('',(-0.158793135767,3.039143806825E-02,1.55));+#4737 = CARTESIAN_POINT('',(-0.161261671175,2.98027869169E-02,1.55));+#4738 = CARTESIAN_POINT('',(-0.163720708869,2.905273223772E-02,1.55));+#4739 = CARTESIAN_POINT('',(-0.166170247396,2.814127604167E-02,1.55));+#4740 = PCURVE('',#2112,#4741);+#4741 = DEFINITIONAL_REPRESENTATION('',(#4742),#4748);+#4742 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4743,#4744,#4745,#4746,#4747),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4743 = CARTESIAN_POINT('',(1.386284787133,-0.127197116595));+#4744 = CARTESIAN_POINT('',(1.385587827004,-0.129613193382));+#4745 = CARTESIAN_POINT('',(1.385040235931,-0.132091160544));+#4746 = CARTESIAN_POINT('',(1.384642013862,-0.134631016364));+#4747 = CARTESIAN_POINT('',(1.384393159621,-0.137232758657));+#4748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4749 = PCURVE('',#4750,#4757);+#4750 = SURFACE_OF_LINEAR_EXTRUSION('',#4751,#4755);+#4751 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4752,#4753,#4754),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4752 = CARTESIAN_POINT('',(-0.166170247396,2.814127604167E-02,1.6000001+ ));+#4753 = CARTESIAN_POINT('',(-0.161271158854,2.996419270833E-02,1.6000001+ ));+#4754 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,1.6000001+ ));+#4755 = VECTOR('',#4756,1.);+#4756 = DIRECTION('',(0.,0.,1.));+#4757 = DEFINITIONAL_REPRESENTATION('',(#4758),#4764);+#4758 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4759,#4760,#4761,#4762,#4763),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4759 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4760 = CARTESIAN_POINT('',(0.749999570603,-5.00001E-02));+#4761 = CARTESIAN_POINT('',(0.499999322917,-5.00001E-02));+#4762 = CARTESIAN_POINT('',(0.249999413774,-5.00001E-02));+#4763 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4765 = ORIENTED_EDGE('',*,*,#4766,.F.);+#4766 = EDGE_CURVE('',#4767,#4731,#4769,.T.);+#4767 = VERTEX_POINT('',#4768);+#4768 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,1.55));+#4769 = SURFACE_CURVE('',#4770,(#4776,#4785),.PCURVE_S1.);+#4770 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4771,#4772,#4773,#4774,#4775),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4771 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,1.55));+#4772 = CARTESIAN_POINT('',(-0.148852538856,3.167317708333E-02,1.55));+#4773 = CARTESIAN_POINT('',(-0.151349555665,3.153076174216E-02,1.55));+#4774 = CARTESIAN_POINT('',(-0.153837077831,3.124593081583E-02,1.55));+#4775 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,1.55));+#4776 = PCURVE('',#2112,#4777);+#4777 = DEFINITIONAL_REPRESENTATION('',(#4778),#4784);+#4778 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4779,#4780,#4781,#4782,#4783),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4779 = CARTESIAN_POINT('',(1.389866319436,-0.11785445905));+#4780 = CARTESIAN_POINT('',(1.388772512306,-0.120109715));+#4781 = CARTESIAN_POINT('',(1.387810987501,-0.1224185773));+#4782 = CARTESIAN_POINT('',(1.386981745782,-0.12478104494));+#4783 = CARTESIAN_POINT('',(1.386284787133,-0.127197116595));+#4784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4785 = PCURVE('',#4786,#4793);+#4786 = SURFACE_OF_LINEAR_EXTRUSION('',#4787,#4791);+#4787 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4788,#4789,#4790),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4788 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,1.6000001+ ));+#4789 = CARTESIAN_POINT('',(-0.151359049479,3.167317708333E-02,1.6000001+ ));+#4790 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,1.6000001+ ));+#4791 = VECTOR('',#4792,1.);+#4792 = DIRECTION('',(0.,0.,1.));+#4793 = DEFINITIONAL_REPRESENTATION('',(#4794),#4800);+#4794 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4795,#4796,#4797,#4798,#4799),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4795 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4796 = CARTESIAN_POINT('',(0.75000002055,-5.00001E-02));+#4797 = CARTESIAN_POINT('',(0.499999945918,-5.00001E-02));+#4798 = CARTESIAN_POINT('',(0.249999898329,-5.00001E-02));+#4799 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4801 = ORIENTED_EDGE('',*,*,#4802,.F.);+#4802 = EDGE_CURVE('',#4803,#4767,#4805,.T.);+#4803 = VERTEX_POINT('',#4804);+#4804 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.55));+#4805 = SURFACE_CURVE('',#4806,(#4815,#4827),.PCURVE_S1.);+#4806 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4807,#4808,#4809,#4810,#4811,+ #4812,#4813,#4814),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202976911478,+ 1.),.UNSPECIFIED.);+#4807 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.55));+#4808 = CARTESIAN_POINT('',(-0.105991635071,1.764870677881E-02,1.55));+#4809 = CARTESIAN_POINT('',(-0.10763947389,1.912579316003E-02,1.55));+#4810 = CARTESIAN_POINT('',(-0.10936245288,2.049568682721E-02,1.55));+#4811 = CARTESIAN_POINT('',(-0.118221102238,2.671653386876E-02,1.55));+#4812 = CARTESIAN_POINT('',(-0.126439941108,3.002172238095E-02,1.55));+#4813 = CARTESIAN_POINT('',(-0.135815985784,3.167317708333E-02,1.55));+#4814 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,1.55));+#4815 = PCURVE('',#2112,#4816);+#4816 = DEFINITIONAL_REPRESENTATION('',(#4817),#4826);+#4817 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4818,#4819,#4820,#4821,#4822,+ #4823,#4824,#4825),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202976911478,+ 1.),.UNSPECIFIED.);+#4818 = CARTESIAN_POINT('',(1.422206826124,-8.694161046602E-02));+#4819 = CARTESIAN_POINT('',(1.420095078593,-8.76653059E-02));+#4820 = CARTESIAN_POINT('',(1.418046961783,-8.850338374952E-02));+#4821 = CARTESIAN_POINT('',(1.416062502464,-8.94558471186E-02));+#4822 = CARTESIAN_POINT('',(1.406599442618,-9.471180609141E-02));+#4823 = CARTESIAN_POINT('',(1.400038978377,-0.100664443525));+#4824 = CARTESIAN_POINT('',(1.394461487611,-0.10837995473));+#4825 = CARTESIAN_POINT('',(1.389866319436,-0.11785445905));+#4826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4827 = PCURVE('',#4828,#4835);+#4828 = SURFACE_OF_LINEAR_EXTRUSION('',#4829,#4833);+#4829 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4830,#4831,#4832),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4830 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,1.6000001+ ));+#4831 = CARTESIAN_POINT('',(-0.119913736979,3.167317708333E-02,1.6000001+ ));+#4832 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.6000001)+ );+#4833 = VECTOR('',#4834,1.);+#4834 = DIRECTION('',(0.,0.,1.));+#4835 = DEFINITIONAL_REPRESENTATION('',(#4836),#4845);+#4836 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4837,#4838,#4839,#4840,#4841,+ #4842,#4843,#4844),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202976911478,+ 1.),.UNSPECIFIED.);+#4837 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4838 = CARTESIAN_POINT('',(0.949251019557,-5.00001E-02));+#4839 = CARTESIAN_POINT('',(0.898501022453,-5.00001E-02));+#4840 = CARTESIAN_POINT('',(0.847750514073,-5.00001E-02));+#4841 = CARTESIAN_POINT('',(0.59771954403,-5.00001E-02));+#4842 = CARTESIAN_POINT('',(0.398438991522,-5.00001E-02));+#4843 = CARTESIAN_POINT('',(0.199188988123,-5.00001E-02));+#4844 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4846 = ORIENTED_EDGE('',*,*,#4847,.F.);+#4847 = EDGE_CURVE('',#4848,#4803,#4850,.T.);+#4848 = VERTEX_POINT('',#4849);+#4849 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,1.55+ ));+#4850 = SURFACE_CURVE('',#4851,(#4857,#4866),.PCURVE_S1.);+#4851 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4852,#4853,#4854,#4855,#4856),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4852 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,1.55+ ));+#4853 = CARTESIAN_POINT('',(-8.892415364583E-02,-1.287897298968E-02,1.55+ ));+#4854 = CARTESIAN_POINT('',(-9.150482649357E-02,-1.388926142758E-03,1.55+ ));+#4855 = CARTESIAN_POINT('',(-9.667072776836E-02,8.259263393031E-03,1.55)+ );+#4856 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.55));+#4857 = PCURVE('',#2112,#4858);+#4858 = DEFINITIONAL_REPRESENTATION('',(#4859),#4865);+#4859 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4860,#4861,#4862,#4863,#4864),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4860 = CARTESIAN_POINT('',(1.467000362853,-9.144559427666E-02));+#4861 = CARTESIAN_POINT('',(1.455010661194,-8.563054647658E-02));+#4862 = CARTESIAN_POINT('',(1.44354621363,-8.293843003066E-02));+#4863 = CARTESIAN_POINT('',(1.432610835676,-8.337615858471E-02));+#4864 = CARTESIAN_POINT('',(1.422206826124,-8.694161046602E-02));+#4865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4866 = PCURVE('',#4867,#4874);+#4867 = SURFACE_OF_LINEAR_EXTRUSION('',#4868,#4872);+#4868 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4869,#4870,#4871),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4869 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.6000001)+ );+#4870 = CARTESIAN_POINT('',(-8.892415364583E-02,4.557291666667E-04,+ 1.6000001));+#4871 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,+ 1.6000001));+#4872 = VECTOR('',#4873,1.);+#4873 = DIRECTION('',(0.,0.,1.));+#4874 = DEFINITIONAL_REPRESENTATION('',(#4875),#4881);+#4875 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4876,#4877,#4878,#4879,#4880),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4876 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4877 = CARTESIAN_POINT('',(0.75008672176,-5.00001E-02));+#4878 = CARTESIAN_POINT('',(0.500075550042,-5.00001E-02));+#4879 = CARTESIAN_POINT('',(0.25002651571,-5.00001E-02));+#4880 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4882 = ORIENTED_EDGE('',*,*,#4883,.F.);+#4883 = EDGE_CURVE('',#4884,#4848,#4886,.T.);+#4884 = VERTEX_POINT('',#4885);+#4885 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,1.55));+#4886 = SURFACE_CURVE('',#4887,(#4896,#4908),.PCURVE_S1.);+#4887 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4888,#4889,#4890,#4891,#4892,+ #4893,#4894,#4895),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223974522066,+ 1.),.UNSPECIFIED.);+#4888 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,1.55));+#4889 = CARTESIAN_POINT('',(-0.103341192725,-6.685186766973E-02,1.55));+#4890 = CARTESIAN_POINT('',(-0.101658596894,-6.502117786553E-02,1.55));+#4891 = CARTESIAN_POINT('',(-0.100111757441,-6.309518183017E-02,1.55));+#4892 = CARTESIAN_POINT('',(-9.38116447333E-02,-5.407060367046E-02,1.55)+ );+#4893 = CARTESIAN_POINT('',(-9.055254455179E-02,-4.592348911069E-02,1.55+ ));+#4894 = CARTESIAN_POINT('',(-8.892415364583E-02,-3.663367552894E-02,1.55+ ));+#4895 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,1.55+ ));+#4896 = PCURVE('',#2112,#4897);+#4897 = DEFINITIONAL_REPRESENTATION('',(#4898),#4907);+#4898 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4899,#4900,#4901,#4902,#4903,+ #4904,#4905,#4906),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223974522066,+ 1.),.UNSPECIFIED.);+#4899 = CARTESIAN_POINT('',(1.498049806202,-0.124548789039));+#4900 = CARTESIAN_POINT('',(1.497281876086,-0.122155452602));+#4901 = CARTESIAN_POINT('',(1.496368957899,-0.119842633051));+#4902 = CARTESIAN_POINT('',(1.495311044795,-0.11761037122));+#4903 = CARTESIAN_POINT('',(1.489940380299,-0.108003582268));+#4904 = CARTESIAN_POINT('',(1.484032165159,-0.10151588595));+#4905 = CARTESIAN_POINT('',(1.476384176457,-9.599677713346E-02));+#4906 = CARTESIAN_POINT('',(1.467000362853,-9.144559427666E-02));+#4907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4908 = PCURVE('',#4909,#4916);+#4909 = SURFACE_OF_LINEAR_EXTRUSION('',#4910,#4914);+#4910 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4911,#4912,#4913),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4911 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,+ 1.6000001));+#4912 = CARTESIAN_POINT('',(-8.892415364583E-02,-5.309244791667E-02,+ 1.6000001));+#4913 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,+ 1.6000001));+#4914 = VECTOR('',#4915,1.);+#4915 = DIRECTION('',(0.,0.,1.));+#4916 = DEFINITIONAL_REPRESENTATION('',(#4917),#4926);+#4917 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4918,#4919,#4920,#4921,#4922,+ #4923,#4924,#4925),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223974522066,+ 1.),.UNSPECIFIED.);+#4918 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4919 = CARTESIAN_POINT('',(0.944001444133,-5.00001E-02));+#4920 = CARTESIAN_POINT('',(0.888001435293,-5.00001E-02));+#4921 = CARTESIAN_POINT('',(0.832000708715,-5.00001E-02));+#4922 = CARTESIAN_POINT('',(0.581969106021,-5.00001E-02));+#4923 = CARTESIAN_POINT('',(0.387938417204,-5.00001E-02));+#4924 = CARTESIAN_POINT('',(0.193938566737,-5.00001E-02));+#4925 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4927 = ORIENTED_EDGE('',*,*,#4928,.F.);+#4928 = EDGE_CURVE('',#4929,#4884,#4931,.T.);+#4929 = VERTEX_POINT('',#4930);+#4930 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.55));+#4931 = SURFACE_CURVE('',#4932,(#4938,#4947),.PCURVE_S1.);+#4932 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4933,#4934,#4935,#4936,#4937),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4933 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.55));+#4934 = CARTESIAN_POINT('',(-0.135471324905,-8.408203125E-02,1.55));+#4935 = CARTESIAN_POINT('',(-0.123382930032,-8.150170705324E-02,1.55));+#4936 = CARTESIAN_POINT('',(-0.113278484721,-7.633587967925E-02,1.55));+#4937 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,1.55));+#4938 = PCURVE('',#2112,#4939);+#4939 = DEFINITIONAL_REPRESENTATION('',(#4940),#4946);+#4940 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4941,#4942,#4943,#4944,#4945),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4941 = CARTESIAN_POINT('',(1.492626029958,-0.171238791155));+#4942 = CARTESIAN_POINT('',(1.498763721755,-0.158583849002));+#4943 = CARTESIAN_POINT('',(1.501717262882,-0.146581184366));+#4944 = CARTESIAN_POINT('',(1.501478704666,-0.135235318269));+#4945 = CARTESIAN_POINT('',(1.498049806202,-0.124548789039));+#4946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4947 = PCURVE('',#4948,#4955);+#4948 = SURFACE_OF_LINEAR_EXTRUSION('',#4949,#4953);+#4949 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4950,#4951,#4952),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4950 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,+ 1.6000001));+#4951 = CARTESIAN_POINT('',(-0.121394856771,-8.408203125E-02,1.6000001)+ );+#4952 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.6000001)+ );+#4953 = VECTOR('',#4954,1.);+#4954 = DIRECTION('',(0.,0.,1.));+#4955 = DEFINITIONAL_REPRESENTATION('',(#4956),#4962);+#4956 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4957,#4958,#4959,#4960,#4961),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4957 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4958 = CARTESIAN_POINT('',(0.750103586512,-5.00001E-02));+#4959 = CARTESIAN_POINT('',(0.50009590332,-5.00001E-02));+#4960 = CARTESIAN_POINT('',(0.250040150994,-5.00001E-02));+#4961 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4963 = ORIENTED_EDGE('',*,*,#4964,.F.);+#4964 = EDGE_CURVE('',#4965,#4929,#4967,.T.);+#4965 = VERTEX_POINT('',#4966);+#4966 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,1.55));+#4967 = SURFACE_CURVE('',#4968,(#4974,#4983),.PCURVE_S1.);+#4968 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4969,#4970,#4971,#4972,#4973),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4969 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,1.55));+#4970 = CARTESIAN_POINT('',(-0.168704951352,-8.317061994749E-02,1.55));+#4971 = CARTESIAN_POINT('',(-0.162704358783,-8.377824670808E-02,1.55));+#4972 = CARTESIAN_POINT('',(-0.156314714782,-8.408203125E-02,1.55));+#4973 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.55));+#4974 = PCURVE('',#2112,#4975);+#4975 = DEFINITIONAL_REPRESENTATION('',(#4976),#4982);+#4976 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4977,#4978,#4979,#4980,#4981),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4977 = CARTESIAN_POINT('',(1.480172067762,-0.192739577244));+#4978 = CARTESIAN_POINT('',(1.483440966182,-0.188088386942));+#4979 = CARTESIAN_POINT('',(1.486606261406,-0.182954457881));+#4980 = CARTESIAN_POINT('',(1.489667948537,-0.177337883532));+#4981 = CARTESIAN_POINT('',(1.492626029958,-0.171238791155));+#4982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4983 = PCURVE('',#4984,#4991);+#4984 = SURFACE_OF_LINEAR_EXTRUSION('',#4985,#4989);+#4985 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#4986,#4987,#4988),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4986 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.6000001)+ );+#4987 = CARTESIAN_POINT('',(-0.163094075521,-8.408203125E-02,1.6000001)+ );+#4988 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,1.6000001+ ));+#4989 = VECTOR('',#4990,1.);+#4990 = DIRECTION('',(0.,0.,1.));+#4991 = DEFINITIONAL_REPRESENTATION('',(#4992),#4998);+#4992 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#4993,#4994,#4995,#4996,#4997),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4993 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#4994 = CARTESIAN_POINT('',(0.749987100118,-5.00001E-02));+#4995 = CARTESIAN_POINT('',(0.499981826396,-5.00001E-02));+#4996 = CARTESIAN_POINT('',(0.249985639987,-5.00001E-02));+#4997 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#4998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4999 = ORIENTED_EDGE('',*,*,#5000,.F.);+#5000 = EDGE_CURVE('',#5001,#4965,#5003,.T.);+#5001 = VERTEX_POINT('',#5002);+#5002 = CARTESIAN_POINT('',(-0.194425455729,-7.679036458333E-02,1.55));+#5003 = SURFACE_CURVE('',#5004,(#5010,#5019),.PCURVE_S1.);+#5004 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5005,#5006,#5007,#5008,#5009),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5005 = CARTESIAN_POINT('',(-0.194425455729,-7.679036458333E-02,1.55));+#5006 = CARTESIAN_POINT('',(-0.18998194502,-7.86133433357E-02,1.55));+#5007 = CARTESIAN_POINT('',(-0.1851492227,-8.013244766312E-02,1.55));+#5008 = CARTESIAN_POINT('',(-0.179927347705,-8.134769262112E-02,1.55));+#5009 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,1.55));+#5010 = PCURVE('',#2112,#5011);+#5011 = DEFINITIONAL_REPRESENTATION('',(#5012),#5018);+#5012 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5013,#5014,#5015,#5016,#5017),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5013 = CARTESIAN_POINT('',(1.466476191914,-0.208446393671));+#5014 = CARTESIAN_POINT('',(1.470055521985,-0.205243826701));+#5015 = CARTESIAN_POINT('',(1.473531284885,-0.201558456266));+#5016 = CARTESIAN_POINT('',(1.476903468443,-0.197390341965));+#5017 = CARTESIAN_POINT('',(1.480172067762,-0.192739577244));+#5018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5019 = PCURVE('',#5020,#5027);+#5020 = SURFACE_OF_LINEAR_EXTRUSION('',#5021,#5025);+#5021 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5022,#5023,#5024),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5022 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,1.6000001+ ));+#5023 = CARTESIAN_POINT('',(-0.185538736979,-8.043619791667E-02,+ 1.6000001));+#5024 = CARTESIAN_POINT('',(-0.194425455729,-7.679036458333E-02,+ 1.6000001));+#5025 = VECTOR('',#5026,1.);+#5026 = DIRECTION('',(0.,0.,1.));+#5027 = DEFINITIONAL_REPRESENTATION('',(#5028),#5034);+#5028 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5029,#5030,#5031,#5032,#5033),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5029 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5030 = CARTESIAN_POINT('',(0.74999148539,-5.00001E-02));+#5031 = CARTESIAN_POINT('',(0.499987672645,-5.00001E-02));+#5032 = CARTESIAN_POINT('',(0.249990023921,-5.00001E-02));+#5033 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5035 = ORIENTED_EDGE('',*,*,#5036,.T.);+#5036 = EDGE_CURVE('',#5001,#5037,#5039,.T.);+#5037 = VERTEX_POINT('',#5038);+#5038 = CARTESIAN_POINT('',(-0.194425455729,-5.343424479167E-02,1.55));+#5039 = SURFACE_CURVE('',#5040,(#5044,#5051),.PCURVE_S1.);+#5040 = LINE('',#5041,#5042);+#5041 = CARTESIAN_POINT('',(-0.194425455729,0.62842904643,1.55));+#5042 = VECTOR('',#5043,1.);+#5043 = DIRECTION('',(0.,1.,0.));+#5044 = PCURVE('',#2112,#5045);+#5045 = DEFINITIONAL_REPRESENTATION('',(#5046),#5050);+#5046 = LINE('',#5047,#5048);+#5047 = CARTESIAN_POINT('',(0.831948446507,9.930181181368E-02));+#5048 = VECTOR('',#5049,1.);+#5049 = DIRECTION('',(-0.899759330922,0.436386464522));+#5050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5051 = PCURVE('',#5052,#5057);+#5052 = PLANE('',#5053);+#5053 = AXIS2_PLACEMENT_3D('',#5054,#5055,#5056);+#5054 = CARTESIAN_POINT('',(-0.194425455729,-7.679036458333E-02,+ 1.6000001));+#5055 = DIRECTION('',(1.,0.,0.));+#5056 = DIRECTION('',(0.,1.,0.));+#5057 = DEFINITIONAL_REPRESENTATION('',(#5058),#5061);+#5058 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5059,#5060),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.705219411013,-0.681863291222),.PIECEWISE_BEZIER_KNOTS.);+#5059 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5060 = CARTESIAN_POINT('',(2.335611979167E-02,-5.00001E-02));+#5061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5062 = ORIENTED_EDGE('',*,*,#5063,.F.);+#5063 = EDGE_CURVE('',#5064,#5037,#5066,.T.);+#5064 = VERTEX_POINT('',#5065);+#5065 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,1.55));+#5066 = SURFACE_CURVE('',#5067,(#5073,#5082),.PCURVE_S1.);+#5067 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5068,#5069,#5070,#5071,#5072),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5068 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,1.55));+#5069 = CARTESIAN_POINT('',(-0.178645936276,-6.052650282871E-02,1.55));+#5070 = CARTESIAN_POINT('',(-0.183924852592,-5.86465869179E-02,1.55));+#5071 = CARTESIAN_POINT('',(-0.189184701662,-5.628248069778E-02,1.55));+#5072 = CARTESIAN_POINT('',(-0.194425455729,-5.343424479167E-02,1.55));+#5073 = PCURVE('',#2112,#5074);+#5074 = DEFINITIONAL_REPRESENTATION('',(#5075),#5081);+#5075 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5076,#5077,#5078,#5079,#5080),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5076 = CARTESIAN_POINT('',(1.462296346907,-0.182993474255));+#5077 = CARTESIAN_POINT('',(1.458728599249,-0.187151294674));+#5078 = CARTESIAN_POINT('',(1.45473347974,-0.191080679029));+#5079 = CARTESIAN_POINT('',(1.450311026169,-0.194781613354));+#5080 = CARTESIAN_POINT('',(1.445461305197,-0.19825409913));+#5081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5082 = PCURVE('',#5083,#5090);+#5083 = SURFACE_OF_LINEAR_EXTRUSION('',#5084,#5088);+#5084 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5085,#5086,#5087),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5085 = CARTESIAN_POINT('',(-0.194425455729,-5.343424479167E-02,+ 1.6000001));+#5086 = CARTESIAN_POINT('',(-0.183943684896,-5.9130859375E-02,1.6000001)+ );+#5087 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,+ 1.6000001));+#5088 = VECTOR('',#5089,1.);+#5089 = DIRECTION('',(0.,0.,1.));+#5090 = DEFINITIONAL_REPRESENTATION('',(#5091),#5097);+#5091 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5092,#5093,#5094,#5095,#5096),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5092 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5093 = CARTESIAN_POINT('',(0.749995142262,-5.00001E-02));+#5094 = CARTESIAN_POINT('',(0.499992584302,-5.00001E-02));+#5095 = CARTESIAN_POINT('',(0.249993734388,-5.00001E-02));+#5096 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5098 = ORIENTED_EDGE('',*,*,#5099,.F.);+#5099 = EDGE_CURVE('',#5100,#5064,#5102,.T.);+#5100 = VERTEX_POINT('',#5101);+#5101 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,1.55));+#5102 = SURFACE_CURVE('',#5103,(#5109,#5118),.PCURVE_S1.);+#5103 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5104,#5105,#5106,#5107,#5108),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5104 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,1.55));+#5105 = CARTESIAN_POINT('',(-0.15722653632,-6.471354166667E-02,1.55));+#5106 = CARTESIAN_POINT('',(-0.162676309234,-6.424832255062E-02,1.55));+#5107 = CARTESIAN_POINT('',(-0.168050133348,-6.331787026675E-02,1.55));+#5108 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,1.55));+#5109 = PCURVE('',#2112,#5110);+#5110 = DEFINITIONAL_REPRESENTATION('',(#5111),#5117);+#5111 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5112,#5113,#5114,#5115,#5116),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5112 = CARTESIAN_POINT('',(1.47425439904,-0.16473436567));+#5113 = CARTESIAN_POINT('',(1.471843062731,-0.169706156777));+#5114 = CARTESIAN_POINT('',(1.469046270357,-0.174406625482));+#5115 = CARTESIAN_POINT('',(1.465864023126,-0.178835737089));+#5116 = CARTESIAN_POINT('',(1.462296346907,-0.182993474255));+#5117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5118 = PCURVE('',#5119,#5126);+#5119 = SURFACE_OF_LINEAR_EXTRUSION('',#5120,#5124);+#5120 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5121,#5122,#5123),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5121 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,+ 1.6000001));+#5122 = CARTESIAN_POINT('',(-0.162752278646,-6.471354166667E-02,+ 1.6000001));+#5123 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,+ 1.6000001));+#5124 = VECTOR('',#5125,1.);+#5125 = DIRECTION('',(0.,0.,1.));+#5126 = DEFINITIONAL_REPRESENTATION('',(#5127),#5133);+#5127 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5128,#5129,#5130,#5131,#5132),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5128 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5129 = CARTESIAN_POINT('',(0.750001184443,-5.00001E-02));+#5130 = CARTESIAN_POINT('',(0.500000690878,-5.00001E-02));+#5131 = CARTESIAN_POINT('',(0.249999851863,-5.00001E-02));+#5132 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5134 = ORIENTED_EDGE('',*,*,#5135,.F.);+#5135 = EDGE_CURVE('',#5136,#5100,#5138,.T.);+#5136 = VERTEX_POINT('',#5137);+#5137 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.55));+#5138 = SURFACE_CURVE('',#5139,(#5145,#5154),.PCURVE_S1.);+#5139 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5140,#5141,#5142,#5143,#5144),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5140 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.55));+#5141 = CARTESIAN_POINT('',(-0.127519213696,-5.970100337309E-02,1.55));+#5142 = CARTESIAN_POINT('',(-0.134128136046,-6.30432491691E-02,1.55));+#5143 = CARTESIAN_POINT('',(-0.14218953329,-6.471354166667E-02,1.55));+#5144 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,1.55));+#5145 = PCURVE('',#2112,#5146);+#5146 = DEFINITIONAL_REPRESENTATION('',(#5147),#5153);+#5147 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5148,#5149,#5150,#5151,#5152),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5148 = CARTESIAN_POINT('',(1.478035890812,-0.133962388845));+#5149 = CARTESIAN_POINT('',(1.480296858121,-0.140789312185));+#5150 = CARTESIAN_POINT('',(1.480420030703,-0.148194262563));+#5151 = CARTESIAN_POINT('',(1.478405007321,-0.156176472991));+#5152 = CARTESIAN_POINT('',(1.47425439904,-0.16473436567));+#5153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5154 = PCURVE('',#5155,#5162);+#5155 = SURFACE_OF_LINEAR_EXTRUSION('',#5156,#5160);+#5156 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5157,#5158,#5159),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5157 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,+ 1.6000001));+#5158 = CARTESIAN_POINT('',(-0.132674153646,-6.471354166667E-02,+ 1.6000001));+#5159 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.6000001));+#5160 = VECTOR('',#5161,1.);+#5161 = DIRECTION('',(0.,0.,1.));+#5162 = DEFINITIONAL_REPRESENTATION('',(#5163),#5169);+#5163 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5164,#5165,#5166,#5167,#5168),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5164 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5165 = CARTESIAN_POINT('',(0.749975935679,-5.00001E-02));+#5166 = CARTESIAN_POINT('',(0.499948315696,-5.00001E-02));+#5167 = CARTESIAN_POINT('',(0.249946567447,-5.00001E-02));+#5168 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5170 = ORIENTED_EDGE('',*,*,#5171,.F.);+#5171 = EDGE_CURVE('',#5172,#5136,#5174,.T.);+#5172 = VERTEX_POINT('',#5173);+#5173 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,1.55));+#5174 = SURFACE_CURVE('',#5175,(#5181,#5190),.PCURVE_S1.);+#5175 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5176,#5177,#5178,#5179,#5180),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5176 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,1.55));+#5177 = CARTESIAN_POINT('',(-0.112052408854,-3.543116417435E-02,1.55));+#5178 = CARTESIAN_POINT('',(-0.113770225065,-4.325518970901E-02,1.55));+#5179 = CARTESIAN_POINT('',(-0.117207460343,-4.967410508517E-02,1.55));+#5180 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.55));+#5181 = PCURVE('',#2112,#5182);+#5182 = DEFINITIONAL_REPRESENTATION('',(#5183),#5189);+#5183 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5184,#5185,#5186,#5187,#5188),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5184 = CARTESIAN_POINT('',(1.456907505332,-0.112255457708));+#5185 = CARTESIAN_POINT('',(1.465209348124,-0.116281880887));+#5186 = CARTESIAN_POINT('',(1.471499456361,-0.121241800892));+#5187 = CARTESIAN_POINT('',(1.475774972415,-0.127135613194));+#5188 = CARTESIAN_POINT('',(1.478035890812,-0.133962388845));+#5189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5190 = PCURVE('',#5191,#5198);+#5191 = SURFACE_OF_LINEAR_EXTRUSION('',#5192,#5196);+#5192 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5193,#5194,#5195),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5193 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.6000001));+#5194 = CARTESIAN_POINT('',(-0.112052408854,-4.466145833333E-02,+ 1.6000001));+#5195 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,+ 1.6000001));+#5196 = VECTOR('',#5197,1.);+#5197 = DIRECTION('',(0.,0.,1.));+#5198 = DEFINITIONAL_REPRESENTATION('',(#5199),#5205);+#5199 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5200,#5201,#5202,#5203,#5204),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5200 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5201 = CARTESIAN_POINT('',(0.750048180392,-5.00001E-02));+#5202 = CARTESIAN_POINT('',(0.500044574465,-5.00001E-02));+#5203 = CARTESIAN_POINT('',(0.250018655493,-5.00001E-02));+#5204 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5206 = ORIENTED_EDGE('',*,*,#5207,.F.);+#5207 = EDGE_CURVE('',#5208,#5172,#5210,.T.);+#5208 = VERTEX_POINT('',#5209);+#5209 = CARTESIAN_POINT('',(-0.122705078125,2.164713541667E-03,1.55));+#5210 = SURFACE_CURVE('',#5211,(#5217,#5226),.PCURVE_S1.);+#5211 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5212,#5213,#5214,#5215,#5216),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5212 = CARTESIAN_POINT('',(-0.122705078125,2.164713541666E-03,1.55));+#5213 = CARTESIAN_POINT('',(-0.117378443573,-2.905558920063E-03,1.55));+#5214 = CARTESIAN_POINT('',(-0.11382723066,-9.324394754419E-03,1.55));+#5215 = CARTESIAN_POINT('',(-0.112052408854,-1.709144273293E-02,1.55));+#5216 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,1.55));+#5217 = PCURVE('',#2112,#5218);+#5218 = DEFINITIONAL_REPRESENTATION('',(#5219),#5225);+#5219 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5220,#5221,#5222,#5223,#5224),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5220 = CARTESIAN_POINT('',(1.426733425664,-0.109460387305));+#5221 = CARTESIAN_POINT('',(1.433619921842,-0.106880296438));+#5222 = CARTESIAN_POINT('',(1.440945030525,-0.106486152559));+#5223 = CARTESIAN_POINT('',(1.448708012631,-0.108278674686));+#5224 = CARTESIAN_POINT('',(1.456907505332,-0.112255457708));+#5225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5226 = PCURVE('',#5227,#5234);+#5227 = SURFACE_OF_LINEAR_EXTRUSION('',#5228,#5232);+#5228 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5229,#5230,#5231),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5229 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,+ 1.6000001));+#5230 = CARTESIAN_POINT('',(-0.112052408854,-7.975260416667E-03,+ 1.6000001));+#5231 = CARTESIAN_POINT('',(-0.122705078125,2.164713541667E-03,1.6000001+ ));+#5232 = VECTOR('',#5233,1.);+#5233 = DIRECTION('',(0.,0.,1.));+#5234 = DEFINITIONAL_REPRESENTATION('',(#5235),#5241);+#5235 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5236,#5237,#5238,#5239,#5240),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5236 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5237 = CARTESIAN_POINT('',(0.749985922914,-5.00001E-02));+#5238 = CARTESIAN_POINT('',(0.499961361682,-5.00001E-02));+#5239 = CARTESIAN_POINT('',(0.249956142183,-5.00001E-02));+#5240 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5242 = ORIENTED_EDGE('',*,*,#5243,.F.);+#5243 = EDGE_CURVE('',#5244,#5208,#5246,.T.);+#5244 = VERTEX_POINT('',#5245);+#5245 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.55));+#5246 = SURFACE_CURVE('',#5247,(#5253,#5262),.PCURVE_S1.);+#5247 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5248,#5249,#5250,#5251,#5252),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5248 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.55));+#5249 = CARTESIAN_POINT('',(-0.142873025897,1.23046875E-02,1.55));+#5250 = CARTESIAN_POINT('',(-0.134754697712,1.061537846037E-02,1.55));+#5251 = CARTESIAN_POINT('',(-0.128031881374,7.235146580822E-03,1.55));+#5252 = CARTESIAN_POINT('',(-0.122705078125,2.164713541666E-03,1.55));+#5253 = PCURVE('',#2112,#5254);+#5254 = DEFINITIONAL_REPRESENTATION('',(#5255),#5261);+#5255 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5256,#5257,#5258,#5259,#5260),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5256 = CARTESIAN_POINT('',(1.404658217636,-0.131739722796));+#5257 = CARTESIAN_POINT('',(1.408808870055,-0.123181739112));+#5258 = CARTESIAN_POINT('',(1.41387157016,-0.116614389176));+#5259 = CARTESIAN_POINT('',(1.419846711388,-0.112040559885));+#5260 = CARTESIAN_POINT('',(1.426733425664,-0.109460387305));+#5261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5262 = PCURVE('',#5263,#5270);+#5263 = SURFACE_OF_LINEAR_EXTRUSION('',#5264,#5268);+#5264 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5265,#5266,#5267),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5265 = CARTESIAN_POINT('',(-0.122705078125,2.164713541667E-03,1.6000001+ ));+#5266 = CARTESIAN_POINT('',(-0.133357747396,1.23046875E-02,1.6000001));+#5267 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.6000001));+#5268 = VECTOR('',#5269,1.);+#5269 = DIRECTION('',(0.,0.,1.));+#5270 = DEFINITIONAL_REPRESENTATION('',(#5271),#5277);+#5271 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5272,#5273,#5274,#5275,#5276),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5272 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5273 = CARTESIAN_POINT('',(0.75005077463,-5.00001E-02));+#5274 = CARTESIAN_POINT('',(0.500048531391,-5.00001E-02));+#5275 = CARTESIAN_POINT('',(0.250021995125,-5.00001E-02));+#5276 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5278 = ORIENTED_EDGE('',*,*,#5279,.F.);+#5279 = EDGE_CURVE('',#4560,#5244,#5280,.T.);+#5280 = SURFACE_CURVE('',#5281,(#5287,#5296),.PCURVE_S1.);+#5281 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5282,#5283,#5284,#5285,#5286),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5282 = CARTESIAN_POINT('',(-0.170385742188,1.019694010417E-02,1.55));+#5283 = CARTESIAN_POINT('',(-0.165999339263,1.125081613148E-02,1.55));+#5284 = CARTESIAN_POINT('',(-0.161536978542,1.195339999768E-02,1.55));+#5285 = CARTESIAN_POINT('',(-0.156998673418,1.23046875E-02,1.55));+#5286 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.55));+#5287 = PCURVE('',#2112,#5288);+#5288 = DEFINITIONAL_REPRESENTATION('',(#5289),#5295);+#5289 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5290,#5291,#5292,#5293,#5294),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5290 = CARTESIAN_POINT('',(1.39869915845,-0.148856354748));+#5291 = CARTESIAN_POINT('',(1.399665090525,-0.144449750554));+#5292 = CARTESIAN_POINT('',(1.400980247954,-0.140128101768));+#5293 = CARTESIAN_POINT('',(1.402644628674,-0.135891422274));+#5294 = CARTESIAN_POINT('',(1.404658217636,-0.131739722796));+#5295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5296 = PCURVE('',#5297,#5304);+#5297 = SURFACE_OF_LINEAR_EXTRUSION('',#5298,#5302);+#5298 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5299,#5300,#5301),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5299 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.6000001));+#5300 = CARTESIAN_POINT('',(-0.161612955729,1.23046875E-02,1.6000001));+#5301 = CARTESIAN_POINT('',(-0.170385742187,1.019694010417E-02,1.6000001+ ));+#5302 = VECTOR('',#5303,1.);+#5303 = DIRECTION('',(0.,0.,1.));+#5304 = DEFINITIONAL_REPRESENTATION('',(#5305),#5311);+#5305 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5306,#5307,#5308,#5309,#5310),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5306 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5307 = CARTESIAN_POINT('',(0.749999447421,-5.00001E-02));+#5308 = CARTESIAN_POINT('',(0.499998746702,-5.00001E-02));+#5309 = CARTESIAN_POINT('',(0.249998672641,-5.00001E-02));+#5310 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5312 = FACE_BOUND('',#5313,.T.);+#5313 = EDGE_LOOP('',(#5314,#5352,#5379,#5406,#5433,#5460,#5487,#5523,+ #5559,#5604,#5640,#5685,#5721,#5757,#5793,#5820,#5856,#5892,#5928,+ #5964,#6000,#6036));+#5314 = ORIENTED_EDGE('',*,*,#5315,.F.);+#5315 = EDGE_CURVE('',#5316,#5318,#5320,.T.);+#5316 = VERTEX_POINT('',#5317);+#5317 = CARTESIAN_POINT('',(-4.66552734375E-02,3.873697916667E-03,1.55)+ );+#5318 = VERTEX_POINT('',#5319);+#5319 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,1.55)+ );+#5320 = SURFACE_CURVE('',#5321,(#5327,#5336),.PCURVE_S1.);+#5321 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5322,#5323,#5324,#5325,#5326),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5322 = CARTESIAN_POINT('',(-4.66552734375E-02,3.873697916666E-03,1.55)+ );+#5323 = CARTESIAN_POINT('',(-4.266764986113E-02,5.981441807034E-03,1.55)+ );+#5324 = CARTESIAN_POINT('',(-3.854709230058E-02,7.737902726319E-03,1.55)+ );+#5325 = CARTESIAN_POINT('',(-3.429361224031E-02,9.143068220536E-03,1.55)+ );+#5326 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,1.55)+ );+#5327 = PCURVE('',#2112,#5328);+#5328 = DEFINITIONAL_REPRESENTATION('',(#5329),#5335);+#5329 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5330,#5331,#5332,#5333,#5334),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5330 = CARTESIAN_POINT('',(1.458382856421,-4.028808827337E-02));+#5331 = CARTESIAN_POINT('',(1.458226539143,-3.578039584789E-02));+#5332 = CARTESIAN_POINT('',(1.458444302587,-3.130638996354E-02));+#5333 = CARTESIAN_POINT('',(1.459036152948,-2.686608638834E-02));+#5334 = CARTESIAN_POINT('',(1.460002081225,-2.245949952034E-02));+#5335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5336 = PCURVE('',#5337,#5344);+#5337 = SURFACE_OF_LINEAR_EXTRUSION('',#5338,#5342);+#5338 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5339,#5340,#5341),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5339 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,+ 1.6000001));+#5340 = CARTESIAN_POINT('',(-3.868001302083E-02,8.089192708333E-03,+ 1.6000001));+#5341 = CARTESIAN_POINT('',(-4.66552734375E-02,3.873697916667E-03,+ 1.6000001));+#5342 = VECTOR('',#5343,1.);+#5343 = DIRECTION('',(0.,0.,1.));+#5344 = DEFINITIONAL_REPRESENTATION('',(#5345),#5351);+#5345 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5346,#5347,#5348,#5349,#5350),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5346 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5347 = CARTESIAN_POINT('',(0.750000415783,-5.00001E-02));+#5348 = CARTESIAN_POINT('',(0.499999990255,-5.00001E-02));+#5349 = CARTESIAN_POINT('',(0.249999569615,-5.00001E-02));+#5350 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5352 = ORIENTED_EDGE('',*,*,#5353,.T.);+#5353 = EDGE_CURVE('',#5316,#5354,#5356,.T.);+#5354 = VERTEX_POINT('',#5355);+#5355 = CARTESIAN_POINT('',(-4.66552734375E-02,8.932291666667E-02,1.55)+ );+#5356 = SURFACE_CURVE('',#5357,(#5361,#5368),.PCURVE_S1.);+#5357 = LINE('',#5358,#5359);+#5358 = CARTESIAN_POINT('',(-4.66552734375E-02,0.66876107768,1.55));+#5359 = VECTOR('',#5360,1.);+#5360 = DIRECTION('',(0.,1.,0.));+#5361 = PCURVE('',#2112,#5362);+#5362 = DEFINITIONAL_REPRESENTATION('',(#5363),#5367);+#5363 = LINE('',#5364,#5365);+#5364 = CARTESIAN_POINT('',(0.860144232467,0.249859764687));+#5365 = VECTOR('',#5366,1.);+#5366 = DIRECTION('',(-0.899759330922,0.436386464522));+#5367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5368 = PCURVE('',#5369,#5374);+#5369 = PLANE('',#5370);+#5370 = AXIS2_PLACEMENT_3D('',#5371,#5372,#5373);+#5371 = CARTESIAN_POINT('',(-4.66552734375E-02,3.873697916667E-03,+ 1.6000001));+#5372 = DIRECTION('',(1.,0.,0.));+#5373 = DIRECTION('',(0.,1.,0.));+#5374 = DEFINITIONAL_REPRESENTATION('',(#5375),#5378);+#5375 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5376,#5377),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.664887379763,-0.579438161013),.PIECEWISE_BEZIER_KNOTS.);+#5376 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5377 = CARTESIAN_POINT('',(8.544921875E-02,-5.00001E-02));+#5378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5379 = ORIENTED_EDGE('',*,*,#5380,.T.);+#5380 = EDGE_CURVE('',#5354,#5381,#5383,.T.);+#5381 = VERTEX_POINT('',#5382);+#5382 = CARTESIAN_POINT('',(3.94775390625E-02,8.932291666667E-02,1.55));+#5383 = SURFACE_CURVE('',#5384,(#5388,#5395),.PCURVE_S1.);+#5384 = LINE('',#5385,#5386);+#5385 = CARTESIAN_POINT('',(-0.34673975108,8.932291666667E-02,1.55));+#5386 = VECTOR('',#5387,1.);+#5387 = DIRECTION('',(1.,0.,-0.));+#5388 = PCURVE('',#2112,#5389);+#5389 = DEFINITIONAL_REPRESENTATION('',(#5390),#5394);+#5390 = LINE('',#5391,#5392);+#5391 = CARTESIAN_POINT('',(1.250546320275,-0.27300301463));+#5392 = VECTOR('',#5393,1.);+#5393 = DIRECTION('',(0.436386464522,0.899759330922));+#5394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5395 = PCURVE('',#5396,#5401);+#5396 = PLANE('',#5397);+#5397 = AXIS2_PLACEMENT_3D('',#5398,#5399,#5400);+#5398 = CARTESIAN_POINT('',(-4.66552734375E-02,8.932291666667E-02,+ 1.6000001));+#5399 = DIRECTION('',(0.,-1.,0.));+#5400 = DIRECTION('',(1.,0.,0.));+#5401 = DEFINITIONAL_REPRESENTATION('',(#5402),#5405);+#5402 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5403,#5404),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.300084477642,0.386217290142),.PIECEWISE_BEZIER_KNOTS.);+#5403 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5404 = CARTESIAN_POINT('',(8.61328125E-02,-5.00001E-02));+#5405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5406 = ORIENTED_EDGE('',*,*,#5407,.T.);+#5407 = EDGE_CURVE('',#5381,#5408,#5410,.T.);+#5408 = VERTEX_POINT('',#5409);+#5409 = CARTESIAN_POINT('',(3.94775390625E-02,6.995442708333E-02,1.55));+#5410 = SURFACE_CURVE('',#5411,(#5415,#5422),.PCURVE_S1.);+#5411 = LINE('',#5412,#5413);+#5412 = CARTESIAN_POINT('',(3.94775390625E-02,0.711485687055,1.55));+#5413 = VECTOR('',#5414,1.);+#5414 = DIRECTION('',(0.,-1.,0.));+#5415 = PCURVE('',#2112,#5416);+#5416 = DEFINITIONAL_REPRESENTATION('',(#5417),#5421);+#5417 = LINE('',#5418,#5419);+#5418 = CARTESIAN_POINT('',(0.859289560048,0.346003007666));+#5419 = VECTOR('',#5420,1.);+#5420 = DIRECTION('',(0.899759330922,-0.436386464522));+#5421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5422 = PCURVE('',#5423,#5428);+#5423 = PLANE('',#5424);+#5424 = AXIS2_PLACEMENT_3D('',#5425,#5426,#5427);+#5425 = CARTESIAN_POINT('',(3.94775390625E-02,8.932291666667E-02,+ 1.6000001));+#5426 = DIRECTION('',(-1.,0.,0.));+#5427 = DIRECTION('',(0.,-1.,0.));+#5428 = DEFINITIONAL_REPRESENTATION('',(#5429),#5432);+#5429 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5430,#5431),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.622162770388,0.641531259971),.PIECEWISE_BEZIER_KNOTS.);+#5430 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5431 = CARTESIAN_POINT('',(1.936848958333E-02,-5.00001E-02));+#5432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5433 = ORIENTED_EDGE('',*,*,#5434,.T.);+#5434 = EDGE_CURVE('',#5408,#5435,#5437,.T.);+#5435 = VERTEX_POINT('',#5436);+#5436 = CARTESIAN_POINT('',(-2.569173177083E-02,6.995442708333E-02,1.55)+ );+#5437 = SURFACE_CURVE('',#5438,(#5442,#5449),.PCURVE_S1.);+#5438 = LINE('',#5439,#5440);+#5439 = CARTESIAN_POINT('',(-0.30367334483,6.995442708333E-02,1.55));+#5440 = VECTOR('',#5441,1.);+#5441 = DIRECTION('',(-1.,0.,0.));+#5442 = PCURVE('',#2112,#5443);+#5443 = DEFINITIONAL_REPRESENTATION('',(#5444),#5448);+#5444 = LINE('',#5445,#5446);+#5445 = CARTESIAN_POINT('',(1.286766896266,-0.24270576045));+#5446 = VECTOR('',#5447,1.);+#5447 = DIRECTION('',(-0.436386464522,-0.899759330922));+#5448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5449 = PCURVE('',#5450,#5455);+#5450 = PLANE('',#5451);+#5451 = AXIS2_PLACEMENT_3D('',#5452,#5453,#5454);+#5452 = CARTESIAN_POINT('',(3.94775390625E-02,6.995442708333E-02,+ 1.6000001));+#5453 = DIRECTION('',(0.,1.,0.));+#5454 = DIRECTION('',(-1.,0.,0.));+#5455 = DEFINITIONAL_REPRESENTATION('',(#5456),#5459);+#5456 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5457,#5458),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.343150883892,-0.277981613059),.PIECEWISE_BEZIER_KNOTS.);+#5457 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5458 = CARTESIAN_POINT('',(6.516927083333E-02,-5.00001E-02));+#5459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5460 = ORIENTED_EDGE('',*,*,#5461,.T.);+#5461 = EDGE_CURVE('',#5435,#5462,#5464,.T.);+#5462 = VERTEX_POINT('',#5463);+#5463 = CARTESIAN_POINT('',(-2.569173177083E-02,2.814127604167E-02,1.55)+ );+#5464 = SURFACE_CURVE('',#5465,(#5469,#5476),.PCURVE_S1.);+#5465 = LINE('',#5466,#5467);+#5466 = CARTESIAN_POINT('',(-2.569173177083E-02,0.701801442263,1.55));+#5467 = VECTOR('',#5468,1.);+#5468 = DIRECTION('',(0.,-1.,0.));+#5469 = PCURVE('',#2112,#5470);+#5470 = DEFINITIONAL_REPRESENTATION('',(#5471),#5475);+#5471 = LINE('',#5472,#5473);+#5472 = CARTESIAN_POINT('',(0.839564061968,0.283140274798));+#5473 = VECTOR('',#5474,1.);+#5474 = DIRECTION('',(0.899759330922,-0.436386464522));+#5475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5476 = PCURVE('',#5477,#5482);+#5477 = PLANE('',#5478);+#5478 = AXIS2_PLACEMENT_3D('',#5479,#5480,#5481);+#5479 = CARTESIAN_POINT('',(-2.569173177083E-02,6.995442708333E-02,+ 1.6000001));+#5480 = DIRECTION('',(-1.,0.,0.));+#5481 = DIRECTION('',(0.,-1.,0.));+#5482 = DEFINITIONAL_REPRESENTATION('',(#5483),#5486);+#5483 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5484,#5485),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.63184701518,0.673660166222),.PIECEWISE_BEZIER_KNOTS.);+#5484 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5485 = CARTESIAN_POINT('',(4.181315104167E-02,-5.00001E-02));+#5486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5487 = ORIENTED_EDGE('',*,*,#5488,.F.);+#5488 = EDGE_CURVE('',#5489,#5462,#5491,.T.);+#5489 = VERTEX_POINT('',#5490);+#5490 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,1.55)+ );+#5491 = SURFACE_CURVE('',#5492,(#5498,#5507),.PCURVE_S1.);+#5492 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5493,#5494,#5495,#5496,#5497),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5493 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,1.55)+ );+#5494 = CARTESIAN_POINT('',(-1.831462014164E-02,3.039143806825E-02,1.55)+ );+#5495 = CARTESIAN_POINT('',(-2.078315555023E-02,2.98027869169E-02,1.55)+ );+#5496 = CARTESIAN_POINT('',(-2.324219324395E-02,2.905273223772E-02,1.55)+ );+#5497 = CARTESIAN_POINT('',(-2.569173177083E-02,2.814127604167E-02,1.55)+ );+#5498 = PCURVE('',#2112,#5499);+#5499 = DEFINITIONAL_REPRESENTATION('',(#5500),#5506);+#5500 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5501,#5502,#5503,#5504,#5505),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5501 = CARTESIAN_POINT('',(1.447587709908,-8.002613671516E-04));+#5502 = CARTESIAN_POINT('',(1.446890749779,-3.216338154117E-03));+#5503 = CARTESIAN_POINT('',(1.446343158706,-5.694305316483E-03));+#5504 = CARTESIAN_POINT('',(1.445944936637,-8.23416113614E-03));+#5505 = CARTESIAN_POINT('',(1.445696082396,-1.083590342912E-02));+#5506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5507 = PCURVE('',#5508,#5515);+#5508 = SURFACE_OF_LINEAR_EXTRUSION('',#5509,#5513);+#5509 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5510,#5511,#5512),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5510 = CARTESIAN_POINT('',(-2.569173177083E-02,2.814127604167E-02,+ 1.6000001));+#5511 = CARTESIAN_POINT('',(-2.079264322917E-02,2.996419270833E-02,+ 1.6000001));+#5512 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,+ 1.6000001));+#5513 = VECTOR('',#5514,1.);+#5514 = DIRECTION('',(0.,0.,1.));+#5515 = DEFINITIONAL_REPRESENTATION('',(#5516),#5522);+#5516 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5517,#5518,#5519,#5520,#5521),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5517 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5518 = CARTESIAN_POINT('',(0.749999570603,-5.00001E-02));+#5519 = CARTESIAN_POINT('',(0.499999322917,-5.00001E-02));+#5520 = CARTESIAN_POINT('',(0.249999413774,-5.00001E-02));+#5521 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5523 = ORIENTED_EDGE('',*,*,#5524,.F.);+#5524 = EDGE_CURVE('',#5525,#5489,#5527,.T.);+#5525 = VERTEX_POINT('',#5526);+#5526 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,1.55)+ );+#5527 = SURFACE_CURVE('',#5528,(#5534,#5543),.PCURVE_S1.);+#5528 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5529,#5530,#5531,#5532,#5533),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5529 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,1.55)+ );+#5530 = CARTESIAN_POINT('',(-8.374023231467E-03,3.167317708333E-02,1.55)+ );+#5531 = CARTESIAN_POINT('',(-1.087104004031E-02,3.153076174216E-02,1.55)+ );+#5532 = CARTESIAN_POINT('',(-1.335856220569E-02,3.124593081583E-02,1.55)+ );+#5533 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,1.55)+ );+#5534 = PCURVE('',#2112,#5535);+#5535 = DEFINITIONAL_REPRESENTATION('',(#5536),#5542);+#5536 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5537,#5538,#5539,#5540,#5541),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5537 = CARTESIAN_POINT('',(1.45116924221,8.542396178053E-03));+#5538 = CARTESIAN_POINT('',(1.450075435081,6.287140227983E-03));+#5539 = CARTESIAN_POINT('',(1.449113910276,3.978277927526E-03));+#5540 = CARTESIAN_POINT('',(1.448284668557,1.61581028742E-03));+#5541 = CARTESIAN_POINT('',(1.447587709908,-8.002613671516E-04));+#5542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5543 = PCURVE('',#5544,#5551);+#5544 = SURFACE_OF_LINEAR_EXTRUSION('',#5545,#5549);+#5545 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5546,#5547,#5548),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5546 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,+ 1.6000001));+#5547 = CARTESIAN_POINT('',(-1.088053385417E-02,3.167317708333E-02,+ 1.6000001));+#5548 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,+ 1.6000001));+#5549 = VECTOR('',#5550,1.);+#5550 = DIRECTION('',(0.,0.,1.));+#5551 = DEFINITIONAL_REPRESENTATION('',(#5552),#5558);+#5552 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5553,#5554,#5555,#5556,#5557),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5553 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5554 = CARTESIAN_POINT('',(0.75000002055,-5.00001E-02));+#5555 = CARTESIAN_POINT('',(0.499999945918,-5.00001E-02));+#5556 = CARTESIAN_POINT('',(0.249999898329,-5.00001E-02));+#5557 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5559 = ORIENTED_EDGE('',*,*,#5560,.F.);+#5560 = EDGE_CURVE('',#5561,#5525,#5563,.T.);+#5561 = VERTEX_POINT('',#5562);+#5562 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,1.55));+#5563 = SURFACE_CURVE('',#5564,(#5573,#5585),.PCURVE_S1.);+#5564 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5565,#5566,#5567,#5568,#5569,+ #5570,#5571,#5572),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202976911479,+ 1.),.UNSPECIFIED.);+#5565 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,1.55));+#5566 = CARTESIAN_POINT('',(3.448688055398E-02,1.764870677881E-02,1.55)+ );+#5567 = CARTESIAN_POINT('',(3.283904173502E-02,1.912579316003E-02,1.55)+ );+#5568 = CARTESIAN_POINT('',(3.111606274497E-02,2.049568682721E-02,1.55)+ );+#5569 = CARTESIAN_POINT('',(2.225741338656E-02,2.671653386876E-02,1.55)+ );+#5570 = CARTESIAN_POINT('',(1.40385745167E-02,3.002172238095E-02,1.55));+#5571 = CARTESIAN_POINT('',(4.662529840853E-03,3.167317708333E-02,1.55)+ );+#5572 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,1.55)+ );+#5573 = PCURVE('',#2112,#5574);+#5574 = DEFINITIONAL_REPRESENTATION('',(#5575),#5584);+#5575 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5576,#5577,#5578,#5579,#5580,+ #5581,#5582,#5583),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202976911479,+ 1.),.UNSPECIFIED.);+#5576 = CARTESIAN_POINT('',(1.483509748899,3.94552447617E-02));+#5577 = CARTESIAN_POINT('',(1.481398001368,3.873154932771E-02));+#5578 = CARTESIAN_POINT('',(1.479349884558,3.789347147819E-02));+#5579 = CARTESIAN_POINT('',(1.477365425238,3.694100810911E-02));+#5580 = CARTESIAN_POINT('',(1.467902365393,3.16850491363E-02));+#5581 = CARTESIAN_POINT('',(1.461341901151,2.573241170321E-02));+#5582 = CARTESIAN_POINT('',(1.455764410386,1.801690049787E-02));+#5583 = CARTESIAN_POINT('',(1.45116924221,8.542396178053E-03));+#5584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5585 = PCURVE('',#5586,#5593);+#5586 = SURFACE_OF_LINEAR_EXTRUSION('',#5587,#5591);+#5587 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5588,#5589,#5590),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5588 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,+ 1.6000001));+#5589 = CARTESIAN_POINT('',(2.056477864583E-02,3.167317708333E-02,+ 1.6000001));+#5590 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,1.6000001+ ));+#5591 = VECTOR('',#5592,1.);+#5592 = DIRECTION('',(0.,0.,1.));+#5593 = DEFINITIONAL_REPRESENTATION('',(#5594),#5603);+#5594 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5595,#5596,#5597,#5598,#5599,+ #5600,#5601,#5602),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.202976911479,+ 1.),.UNSPECIFIED.);+#5595 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5596 = CARTESIAN_POINT('',(0.949251019557,-5.00001E-02));+#5597 = CARTESIAN_POINT('',(0.898501022453,-5.00001E-02));+#5598 = CARTESIAN_POINT('',(0.847750514073,-5.00001E-02));+#5599 = CARTESIAN_POINT('',(0.59771954403,-5.00001E-02));+#5600 = CARTESIAN_POINT('',(0.398438991522,-5.00001E-02));+#5601 = CARTESIAN_POINT('',(0.199188988123,-5.00001E-02));+#5602 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5604 = ORIENTED_EDGE('',*,*,#5605,.F.);+#5605 = EDGE_CURVE('',#5606,#5561,#5608,.T.);+#5606 = VERTEX_POINT('',#5607);+#5607 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,1.55)+ );+#5608 = SURFACE_CURVE('',#5609,(#5615,#5624),.PCURVE_S1.);+#5609 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5610,#5611,#5612,#5613,#5614),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5610 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,1.55)+ );+#5611 = CARTESIAN_POINT('',(5.155436197917E-02,-1.287897298968E-02,1.55)+ );+#5612 = CARTESIAN_POINT('',(4.897368913143E-02,-1.388926142758E-03,1.55)+ );+#5613 = CARTESIAN_POINT('',(4.380778785664E-02,8.259263393031E-03,1.55)+ );+#5614 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,1.55));+#5615 = PCURVE('',#2112,#5616);+#5616 = DEFINITIONAL_REPRESENTATION('',(#5617),#5623);+#5617 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5618,#5619,#5620,#5621,#5622),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5618 = CARTESIAN_POINT('',(1.528303285628,3.495126095105E-02));+#5619 = CARTESIAN_POINT('',(1.516313583969,4.076630875114E-02));+#5620 = CARTESIAN_POINT('',(1.504849136405,4.345842519705E-02));+#5621 = CARTESIAN_POINT('',(1.493913758451,4.3020696643E-02));+#5622 = CARTESIAN_POINT('',(1.483509748899,3.94552447617E-02));+#5623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5624 = PCURVE('',#5625,#5632);+#5625 = SURFACE_OF_LINEAR_EXTRUSION('',#5626,#5630);+#5626 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5627,#5628,#5629),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5627 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,1.6000001+ ));+#5628 = CARTESIAN_POINT('',(5.155436197917E-02,4.557291666667E-04,+ 1.6000001));+#5629 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,+ 1.6000001));+#5630 = VECTOR('',#5631,1.);+#5631 = DIRECTION('',(0.,0.,1.));+#5632 = DEFINITIONAL_REPRESENTATION('',(#5633),#5639);+#5633 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5634,#5635,#5636,#5637,#5638),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5634 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5635 = CARTESIAN_POINT('',(0.75008672176,-5.00001E-02));+#5636 = CARTESIAN_POINT('',(0.500075550042,-5.00001E-02));+#5637 = CARTESIAN_POINT('',(0.25002651571,-5.00001E-02));+#5638 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5640 = ORIENTED_EDGE('',*,*,#5641,.F.);+#5641 = EDGE_CURVE('',#5642,#5606,#5644,.T.);+#5642 = VERTEX_POINT('',#5643);+#5643 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,1.55)+ );+#5644 = SURFACE_CURVE('',#5645,(#5654,#5666),.PCURVE_S1.);+#5645 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5646,#5647,#5648,#5649,#5650,+ #5651,#5652,#5653),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223974522066,+ 1.),.UNSPECIFIED.);+#5646 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,1.55)+ );+#5647 = CARTESIAN_POINT('',(3.713732289967E-02,-6.685186766973E-02,1.55)+ );+#5648 = CARTESIAN_POINT('',(3.881991873108E-02,-6.502117786553E-02,1.55)+ );+#5649 = CARTESIAN_POINT('',(4.036675818399E-02,-6.309518183017E-02,1.55)+ );+#5650 = CARTESIAN_POINT('',(4.66668708917E-02,-5.407060367046E-02,1.55)+ );+#5651 = CARTESIAN_POINT('',(4.992597107321E-02,-4.592348911069E-02,1.55)+ );+#5652 = CARTESIAN_POINT('',(5.155436197917E-02,-3.663367552894E-02,1.55)+ );+#5653 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,1.55)+ );+#5654 = PCURVE('',#2112,#5655);+#5655 = DEFINITIONAL_REPRESENTATION('',(#5656),#5665);+#5656 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5657,#5658,#5659,#5660,#5661,+ #5662,#5663,#5664),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223974522066,+ 1.),.UNSPECIFIED.);+#5657 = CARTESIAN_POINT('',(1.559352728977,1.848066188509E-03));+#5658 = CARTESIAN_POINT('',(1.558584798861,4.241402625629E-03));+#5659 = CARTESIAN_POINT('',(1.557671880674,6.554222176403E-03));+#5660 = CARTESIAN_POINT('',(1.55661396757,8.786484008156E-03));+#5661 = CARTESIAN_POINT('',(1.551243303074,1.83932729597E-02));+#5662 = CARTESIAN_POINT('',(1.545335087934,2.488096927722E-02));+#5663 = CARTESIAN_POINT('',(1.537687099232,3.040007809425E-02));+#5664 = CARTESIAN_POINT('',(1.528303285628,3.495126095105E-02));+#5665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5666 = PCURVE('',#5667,#5674);+#5667 = SURFACE_OF_LINEAR_EXTRUSION('',#5668,#5672);+#5668 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5669,#5670,#5671),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5669 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,+ 1.6000001));+#5670 = CARTESIAN_POINT('',(5.155436197917E-02,-5.309244791667E-02,+ 1.6000001));+#5671 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,+ 1.6000001));+#5672 = VECTOR('',#5673,1.);+#5673 = DIRECTION('',(0.,0.,1.));+#5674 = DEFINITIONAL_REPRESENTATION('',(#5675),#5684);+#5675 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5676,#5677,#5678,#5679,#5680,+ #5681,#5682,#5683),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.223974522066,+ 1.),.UNSPECIFIED.);+#5676 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5677 = CARTESIAN_POINT('',(0.944001444133,-5.00001E-02));+#5678 = CARTESIAN_POINT('',(0.888001435293,-5.00001E-02));+#5679 = CARTESIAN_POINT('',(0.832000708715,-5.00001E-02));+#5680 = CARTESIAN_POINT('',(0.581969106021,-5.00001E-02));+#5681 = CARTESIAN_POINT('',(0.387938417204,-5.00001E-02));+#5682 = CARTESIAN_POINT('',(0.193938566737,-5.00001E-02));+#5683 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5685 = ORIENTED_EDGE('',*,*,#5686,.F.);+#5686 = EDGE_CURVE('',#5687,#5642,#5689,.T.);+#5687 = VERTEX_POINT('',#5688);+#5688 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,1.55));+#5689 = SURFACE_CURVE('',#5690,(#5696,#5705),.PCURVE_S1.);+#5690 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5691,#5692,#5693,#5694,#5695),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5691 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,1.55));+#5692 = CARTESIAN_POINT('',(5.007190720069E-03,-8.408203125E-02,1.55));+#5693 = CARTESIAN_POINT('',(1.709558559291E-02,-8.150170705324E-02,1.55)+ );+#5694 = CARTESIAN_POINT('',(2.72000309044E-02,-7.633587967925E-02,1.55)+ );+#5695 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,1.55)+ );+#5696 = PCURVE('',#2112,#5697);+#5697 = DEFINITIONAL_REPRESENTATION('',(#5698),#5704);+#5698 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5699,#5700,#5701,#5702,#5703),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5699 = CARTESIAN_POINT('',(1.553928952732,-4.484193592713E-02));+#5700 = CARTESIAN_POINT('',(1.560066644529,-3.218699377467E-02));+#5701 = CARTESIAN_POINT('',(1.563020185657,-2.018432913841E-02));+#5702 = CARTESIAN_POINT('',(1.562781627441,-8.838463041537E-03));+#5703 = CARTESIAN_POINT('',(1.559352728977,1.848066188509E-03));+#5704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5705 = PCURVE('',#5706,#5713);+#5706 = SURFACE_OF_LINEAR_EXTRUSION('',#5707,#5711);+#5707 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5708,#5709,#5710),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5708 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,+ 1.6000001));+#5709 = CARTESIAN_POINT('',(1.908365885417E-02,-8.408203125E-02,+ 1.6000001));+#5710 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,1.6000001+ ));+#5711 = VECTOR('',#5712,1.);+#5712 = DIRECTION('',(0.,0.,1.));+#5713 = DEFINITIONAL_REPRESENTATION('',(#5714),#5720);+#5714 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5715,#5716,#5717,#5718,#5719),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5715 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5716 = CARTESIAN_POINT('',(0.750103586512,-5.00001E-02));+#5717 = CARTESIAN_POINT('',(0.50009590332,-5.00001E-02));+#5718 = CARTESIAN_POINT('',(0.250040150994,-5.00001E-02));+#5719 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5721 = ORIENTED_EDGE('',*,*,#5722,.F.);+#5722 = EDGE_CURVE('',#5723,#5687,#5725,.T.);+#5723 = VERTEX_POINT('',#5724);+#5724 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,1.55)+ );+#5725 = SURFACE_CURVE('',#5726,(#5732,#5741),.PCURVE_S1.);+#5726 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5727,#5728,#5729,#5730,#5731),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5727 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,1.55)+ );+#5728 = CARTESIAN_POINT('',(-2.822643572693E-02,-8.317061994749E-02,1.55+ ));+#5729 = CARTESIAN_POINT('',(-2.222584315814E-02,-8.377824670808E-02,1.55+ ));+#5730 = CARTESIAN_POINT('',(-1.583619915719E-02,-8.408203125E-02,1.55));+#5731 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,1.55));+#5732 = PCURVE('',#2112,#5733);+#5733 = DEFINITIONAL_REPRESENTATION('',(#5734),#5740);+#5734 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5735,#5736,#5737,#5738,#5739),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5735 = CARTESIAN_POINT('',(1.541474990537,-6.634272201604E-02));+#5736 = CARTESIAN_POINT('',(1.544743888957,-6.169153171471E-02));+#5737 = CARTESIAN_POINT('',(1.547909184181,-5.655760265369E-02));+#5738 = CARTESIAN_POINT('',(1.550970871312,-5.094102830478E-02));+#5739 = CARTESIAN_POINT('',(1.553928952732,-4.484193592713E-02));+#5740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5741 = PCURVE('',#5742,#5749);+#5742 = SURFACE_OF_LINEAR_EXTRUSION('',#5743,#5747);+#5743 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5744,#5745,#5746),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5744 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,1.6000001+ ));+#5745 = CARTESIAN_POINT('',(-2.261555989583E-02,-8.408203125E-02,+ 1.6000001));+#5746 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,+ 1.6000001));+#5747 = VECTOR('',#5748,1.);+#5748 = DIRECTION('',(0.,0.,1.));+#5749 = DEFINITIONAL_REPRESENTATION('',(#5750),#5756);+#5750 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5751,#5752,#5753,#5754,#5755),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5751 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5752 = CARTESIAN_POINT('',(0.749987100118,-5.00001E-02));+#5753 = CARTESIAN_POINT('',(0.499981826396,-5.00001E-02));+#5754 = CARTESIAN_POINT('',(0.249985639987,-5.00001E-02));+#5755 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5757 = ORIENTED_EDGE('',*,*,#5758,.F.);+#5758 = EDGE_CURVE('',#5759,#5723,#5761,.T.);+#5759 = VERTEX_POINT('',#5760);+#5760 = CARTESIAN_POINT('',(-5.394694010417E-02,-7.679036458333E-02,1.55+ ));+#5761 = SURFACE_CURVE('',#5762,(#5768,#5777),.PCURVE_S1.);+#5762 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5763,#5764,#5765,#5766,#5767),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5763 = CARTESIAN_POINT('',(-5.394694010417E-02,-7.679036458333E-02,1.55+ ));+#5764 = CARTESIAN_POINT('',(-4.950342939528E-02,-7.86133433357E-02,1.55)+ );+#5765 = CARTESIAN_POINT('',(-4.467070707466E-02,-8.013244766312E-02,1.55+ ));+#5766 = CARTESIAN_POINT('',(-3.944883207987E-02,-8.134769262112E-02,1.55+ ));+#5767 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,1.55)+ );+#5768 = PCURVE('',#2112,#5769);+#5769 = DEFINITIONAL_REPRESENTATION('',(#5770),#5776);+#5770 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5771,#5772,#5773,#5774,#5775),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5771 = CARTESIAN_POINT('',(1.527779114689,-8.204953844305E-02));+#5772 = CARTESIAN_POINT('',(1.53135844476,-7.884697147331E-02));+#5773 = CARTESIAN_POINT('',(1.53483420766,-7.516160103826E-02));+#5774 = CARTESIAN_POINT('',(1.538206391218,-7.099348673754E-02));+#5775 = CARTESIAN_POINT('',(1.541474990537,-6.634272201604E-02));+#5776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5777 = PCURVE('',#5778,#5785);+#5778 = SURFACE_OF_LINEAR_EXTRUSION('',#5779,#5783);+#5779 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5780,#5781,#5782),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5780 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,+ 1.6000001));+#5781 = CARTESIAN_POINT('',(-4.506022135417E-02,-8.043619791667E-02,+ 1.6000001));+#5782 = CARTESIAN_POINT('',(-5.394694010417E-02,-7.679036458333E-02,+ 1.6000001));+#5783 = VECTOR('',#5784,1.);+#5784 = DIRECTION('',(0.,0.,1.));+#5785 = DEFINITIONAL_REPRESENTATION('',(#5786),#5792);+#5786 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5787,#5788,#5789,#5790,#5791),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5787 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5788 = CARTESIAN_POINT('',(0.74999148539,-5.00001E-02));+#5789 = CARTESIAN_POINT('',(0.499987672645,-5.00001E-02));+#5790 = CARTESIAN_POINT('',(0.249990023921,-5.00001E-02));+#5791 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5793 = ORIENTED_EDGE('',*,*,#5794,.T.);+#5794 = EDGE_CURVE('',#5759,#5795,#5797,.T.);+#5795 = VERTEX_POINT('',#5796);+#5796 = CARTESIAN_POINT('',(-5.394694010417E-02,-5.343424479167E-02,1.55+ ));+#5797 = SURFACE_CURVE('',#5798,(#5802,#5809),.PCURVE_S1.);+#5798 = LINE('',#5799,#5800);+#5799 = CARTESIAN_POINT('',(-5.394694010417E-02,0.62842904643,1.55));+#5800 = VECTOR('',#5801,1.);+#5801 = DIRECTION('',(0.,1.,0.));+#5802 = PCURVE('',#2112,#5803);+#5803 = DEFINITIONAL_REPRESENTATION('',(#5804),#5808);+#5804 = LINE('',#5805,#5806);+#5805 = CARTESIAN_POINT('',(0.893251369282,0.225698667041));+#5806 = VECTOR('',#5807,1.);+#5807 = DIRECTION('',(-0.899759330922,0.436386464522));+#5808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5809 = PCURVE('',#5810,#5815);+#5810 = PLANE('',#5811);+#5811 = AXIS2_PLACEMENT_3D('',#5812,#5813,#5814);+#5812 = CARTESIAN_POINT('',(-5.394694010417E-02,-7.679036458333E-02,+ 1.6000001));+#5813 = DIRECTION('',(1.,0.,0.));+#5814 = DIRECTION('',(0.,1.,0.));+#5815 = DEFINITIONAL_REPRESENTATION('',(#5816),#5819);+#5816 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5817,#5818),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.705219411013,-0.681863291222),.PIECEWISE_BEZIER_KNOTS.);+#5817 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5818 = CARTESIAN_POINT('',(2.335611979167E-02,-5.00001E-02));+#5819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5820 = ORIENTED_EDGE('',*,*,#5821,.F.);+#5821 = EDGE_CURVE('',#5822,#5795,#5824,.T.);+#5822 = VERTEX_POINT('',#5823);+#5823 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,1.55+ ));+#5824 = SURFACE_CURVE('',#5825,(#5831,#5840),.PCURVE_S1.);+#5825 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5826,#5827,#5828,#5829,#5830),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5826 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,1.55+ ));+#5827 = CARTESIAN_POINT('',(-3.816742065064E-02,-6.052650282871E-02,1.55+ ));+#5828 = CARTESIAN_POINT('',(-4.344633696666E-02,-5.86465869179E-02,1.55)+ );+#5829 = CARTESIAN_POINT('',(-4.870618603691E-02,-5.628248069778E-02,1.55+ ));+#5830 = CARTESIAN_POINT('',(-5.394694010417E-02,-5.343424479167E-02,1.55+ ));+#5831 = PCURVE('',#2112,#5832);+#5832 = DEFINITIONAL_REPRESENTATION('',(#5833),#5839);+#5833 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5834,#5835,#5836,#5837,#5838),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5834 = CARTESIAN_POINT('',(1.523599269682,-5.659661902759E-02));+#5835 = CARTESIAN_POINT('',(1.520031522024,-6.075443944669E-02));+#5836 = CARTESIAN_POINT('',(1.516036402515,-6.468382380126E-02));+#5837 = CARTESIAN_POINT('',(1.511613948944,-6.838475812632E-02));+#5838 = CARTESIAN_POINT('',(1.506764227972,-7.185724390221E-02));+#5839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5840 = PCURVE('',#5841,#5848);+#5841 = SURFACE_OF_LINEAR_EXTRUSION('',#5842,#5846);+#5842 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5843,#5844,#5845),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5843 = CARTESIAN_POINT('',(-5.394694010417E-02,-5.343424479167E-02,+ 1.6000001));+#5844 = CARTESIAN_POINT('',(-4.346516927083E-02,-5.9130859375E-02,+ 1.6000001));+#5845 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,+ 1.6000001));+#5846 = VECTOR('',#5847,1.);+#5847 = DIRECTION('',(0.,0.,1.));+#5848 = DEFINITIONAL_REPRESENTATION('',(#5849),#5855);+#5849 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5850,#5851,#5852,#5853,#5854),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5850 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5851 = CARTESIAN_POINT('',(0.749995142262,-5.00001E-02));+#5852 = CARTESIAN_POINT('',(0.499992584302,-5.00001E-02));+#5853 = CARTESIAN_POINT('',(0.249993734388,-5.00001E-02));+#5854 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5856 = ORIENTED_EDGE('',*,*,#5857,.F.);+#5857 = EDGE_CURVE('',#5858,#5822,#5860,.T.);+#5858 = VERTEX_POINT('',#5859);+#5859 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,1.55+ ));+#5860 = SURFACE_CURVE('',#5861,(#5867,#5876),.PCURVE_S1.);+#5861 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5862,#5863,#5864,#5865,#5866),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5862 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,1.55+ ));+#5863 = CARTESIAN_POINT('',(-1.674802069542E-02,-6.471354166667E-02,1.55+ ));+#5864 = CARTESIAN_POINT('',(-2.219779360906E-02,-6.424832255062E-02,1.55+ ));+#5865 = CARTESIAN_POINT('',(-2.757161772257E-02,-6.331787026675E-02,1.55+ ));+#5866 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,1.55+ ));+#5867 = PCURVE('',#2112,#5868);+#5868 = DEFINITIONAL_REPRESENTATION('',(#5869),#5875);+#5869 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5870,#5871,#5872,#5873,#5874),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5870 = CARTESIAN_POINT('',(1.535557321815,-3.833751044261E-02));+#5871 = CARTESIAN_POINT('',(1.533145985506,-4.330930154953E-02));+#5872 = CARTESIAN_POINT('',(1.530349193132,-4.800977025472E-02));+#5873 = CARTESIAN_POINT('',(1.527166945901,-5.243888186101E-02));+#5874 = CARTESIAN_POINT('',(1.523599269682,-5.659661902759E-02));+#5875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5876 = PCURVE('',#5877,#5884);+#5877 = SURFACE_OF_LINEAR_EXTRUSION('',#5878,#5882);+#5878 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5879,#5880,#5881),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5879 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,+ 1.6000001));+#5880 = CARTESIAN_POINT('',(-2.227376302083E-02,-6.471354166667E-02,+ 1.6000001));+#5881 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,+ 1.6000001));+#5882 = VECTOR('',#5883,1.);+#5883 = DIRECTION('',(0.,0.,1.));+#5884 = DEFINITIONAL_REPRESENTATION('',(#5885),#5891);+#5885 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5886,#5887,#5888,#5889,#5890),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5886 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5887 = CARTESIAN_POINT('',(0.750001184443,-5.00001E-02));+#5888 = CARTESIAN_POINT('',(0.500000690878,-5.00001E-02));+#5889 = CARTESIAN_POINT('',(0.249999851863,-5.00001E-02));+#5890 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5892 = ORIENTED_EDGE('',*,*,#5893,.F.);+#5893 = EDGE_CURVE('',#5894,#5858,#5896,.T.);+#5894 = VERTEX_POINT('',#5895);+#5895 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.55));+#5896 = SURFACE_CURVE('',#5897,(#5903,#5912),.PCURVE_S1.);+#5897 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5898,#5899,#5900,#5901,#5902),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5898 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.55));+#5899 = CARTESIAN_POINT('',(1.295930192881E-02,-5.970100337309E-02,1.55)+ );+#5900 = CARTESIAN_POINT('',(6.350379579325E-03,-6.30432491691E-02,1.55)+ );+#5901 = CARTESIAN_POINT('',(-1.711017664545E-03,-6.471354166667E-02,1.55+ ));+#5902 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,1.55+ ));+#5903 = PCURVE('',#2112,#5904);+#5904 = DEFINITIONAL_REPRESENTATION('',(#5905),#5911);+#5905 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5906,#5907,#5908,#5909,#5910),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5906 = CARTESIAN_POINT('',(1.539338813587,-7.565533617529E-03));+#5907 = CARTESIAN_POINT('',(1.541599780896,-1.439245695745E-02));+#5908 = CARTESIAN_POINT('',(1.541722953478,-2.179740733522E-02));+#5909 = CARTESIAN_POINT('',(1.539707930096,-2.97796177634E-02));+#5910 = CARTESIAN_POINT('',(1.535557321815,-3.833751044261E-02));+#5911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5912 = PCURVE('',#5913,#5920);+#5913 = SURFACE_OF_LINEAR_EXTRUSION('',#5914,#5918);+#5914 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5915,#5916,#5917),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5915 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,+ 1.6000001));+#5916 = CARTESIAN_POINT('',(7.804361979167E-03,-6.471354166667E-02,+ 1.6000001));+#5917 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.6000001));+#5918 = VECTOR('',#5919,1.);+#5919 = DIRECTION('',(0.,0.,1.));+#5920 = DEFINITIONAL_REPRESENTATION('',(#5921),#5927);+#5921 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5922,#5923,#5924,#5925,#5926),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5922 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5923 = CARTESIAN_POINT('',(0.749975935679,-5.00001E-02));+#5924 = CARTESIAN_POINT('',(0.499948315696,-5.00001E-02));+#5925 = CARTESIAN_POINT('',(0.249946567447,-5.00001E-02));+#5926 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5928 = ORIENTED_EDGE('',*,*,#5929,.F.);+#5929 = EDGE_CURVE('',#5930,#5894,#5932,.T.);+#5930 = VERTEX_POINT('',#5931);+#5931 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,1.55)+ );+#5932 = SURFACE_CURVE('',#5933,(#5939,#5948),.PCURVE_S1.);+#5933 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5934,#5935,#5936,#5937,#5938),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5934 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,1.55)+ );+#5935 = CARTESIAN_POINT('',(2.842610677083E-02,-3.543116417435E-02,1.55)+ );+#5936 = CARTESIAN_POINT('',(2.670829056035E-02,-4.325518970901E-02,1.55)+ );+#5937 = CARTESIAN_POINT('',(2.327105528173E-02,-4.967410508517E-02,1.55)+ );+#5938 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.55));+#5939 = PCURVE('',#2112,#5940);+#5940 = DEFINITIONAL_REPRESENTATION('',(#5941),#5947);+#5941 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5942,#5943,#5944,#5945,#5946),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5942 = CARTESIAN_POINT('',(1.518210428107,1.41413975194E-02));+#5943 = CARTESIAN_POINT('',(1.526512270899,1.011497434118E-02));+#5944 = CARTESIAN_POINT('',(1.532802379136,5.155054335586E-03));+#5945 = CARTESIAN_POINT('',(1.53707789519,-7.387579659957E-04));+#5946 = CARTESIAN_POINT('',(1.539338813587,-7.565533617529E-03));+#5947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5948 = PCURVE('',#5949,#5956);+#5949 = SURFACE_OF_LINEAR_EXTRUSION('',#5950,#5954);+#5950 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5951,#5952,#5953),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5951 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.6000001));+#5952 = CARTESIAN_POINT('',(2.842610677083E-02,-4.466145833333E-02,+ 1.6000001));+#5953 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,+ 1.6000001));+#5954 = VECTOR('',#5955,1.);+#5955 = DIRECTION('',(0.,0.,1.));+#5956 = DEFINITIONAL_REPRESENTATION('',(#5957),#5963);+#5957 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5958,#5959,#5960,#5961,#5962),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5958 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5959 = CARTESIAN_POINT('',(0.750048180392,-5.00001E-02));+#5960 = CARTESIAN_POINT('',(0.500044574465,-5.00001E-02));+#5961 = CARTESIAN_POINT('',(0.250018655493,-5.00001E-02));+#5962 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5964 = ORIENTED_EDGE('',*,*,#5965,.F.);+#5965 = EDGE_CURVE('',#5966,#5930,#5968,.T.);+#5966 = VERTEX_POINT('',#5967);+#5967 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.55));+#5968 = SURFACE_CURVE('',#5969,(#5975,#5984),.PCURVE_S1.);+#5969 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5970,#5971,#5972,#5973,#5974),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5970 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.55));+#5971 = CARTESIAN_POINT('',(2.310007205249E-02,-2.905558920063E-03,1.55)+ );+#5972 = CARTESIAN_POINT('',(2.665128496537E-02,-9.324394754419E-03,1.55)+ );+#5973 = CARTESIAN_POINT('',(2.842610677083E-02,-1.709144273293E-02,1.55)+ );+#5974 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,1.55)+ );+#5975 = PCURVE('',#2112,#5976);+#5976 = DEFINITIONAL_REPRESENTATION('',(#5977),#5983);+#5977 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5978,#5979,#5980,#5981,#5982),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5978 = CARTESIAN_POINT('',(1.488036348439,1.693646792262E-02));+#5979 = CARTESIAN_POINT('',(1.494922844617,1.95165587899E-02));+#5980 = CARTESIAN_POINT('',(1.5022479533,1.991070266825E-02));+#5981 = CARTESIAN_POINT('',(1.510010935406,1.811818054132E-02));+#5982 = CARTESIAN_POINT('',(1.518210428107,1.41413975194E-02));+#5983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5984 = PCURVE('',#5985,#5992);+#5985 = SURFACE_OF_LINEAR_EXTRUSION('',#5986,#5990);+#5986 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#5987,#5988,#5989),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5987 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,+ 1.6000001));+#5988 = CARTESIAN_POINT('',(2.842610677083E-02,-7.975260416667E-03,+ 1.6000001));+#5989 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.6000001)+ );+#5990 = VECTOR('',#5991,1.);+#5991 = DIRECTION('',(0.,0.,1.));+#5992 = DEFINITIONAL_REPRESENTATION('',(#5993),#5999);+#5993 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#5994,#5995,#5996,#5997,#5998),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5994 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#5995 = CARTESIAN_POINT('',(0.749985922914,-5.00001E-02));+#5996 = CARTESIAN_POINT('',(0.499961361682,-5.00001E-02));+#5997 = CARTESIAN_POINT('',(0.249956142183,-5.00001E-02));+#5998 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#5999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6000 = ORIENTED_EDGE('',*,*,#6001,.F.);+#6001 = EDGE_CURVE('',#6002,#5966,#6004,.T.);+#6002 = VERTEX_POINT('',#6003);+#6003 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,1.55));+#6004 = SURFACE_CURVE('',#6005,(#6011,#6020),.PCURVE_S1.);+#6005 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6006,#6007,#6008,#6009,#6010),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6006 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,1.55));+#6007 = CARTESIAN_POINT('',(-2.394510271559E-03,1.23046875E-02,1.55));+#6008 = CARTESIAN_POINT('',(5.723817912694E-03,1.061537846037E-02,1.55)+ );+#6009 = CARTESIAN_POINT('',(1.2446634251E-02,7.235146580822E-03,1.55));+#6010 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.55));+#6011 = PCURVE('',#2112,#6012);+#6012 = DEFINITIONAL_REPRESENTATION('',(#6013),#6019);+#6013 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6014,#6015,#6016,#6017,#6018),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6014 = CARTESIAN_POINT('',(1.465961140411,-5.342867567936E-03));+#6015 = CARTESIAN_POINT('',(1.47011179283,3.215116115626E-03));+#6016 = CARTESIAN_POINT('',(1.475174492935,9.782466051608E-03));+#6017 = CARTESIAN_POINT('',(1.481149634163,1.435629534289E-02));+#6018 = CARTESIAN_POINT('',(1.488036348439,1.693646792262E-02));+#6019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6020 = PCURVE('',#6021,#6028);+#6021 = SURFACE_OF_LINEAR_EXTRUSION('',#6022,#6026);+#6022 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6023,#6024,#6025),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6023 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.6000001)+ );+#6024 = CARTESIAN_POINT('',(7.120768229167E-03,1.23046875E-02,1.6000001)+ );+#6025 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,1.6000001+ ));+#6026 = VECTOR('',#6027,1.);+#6027 = DIRECTION('',(0.,0.,1.));+#6028 = DEFINITIONAL_REPRESENTATION('',(#6029),#6035);+#6029 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6030,#6031,#6032,#6033,#6034),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6030 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6031 = CARTESIAN_POINT('',(0.75005077463,-5.00001E-02));+#6032 = CARTESIAN_POINT('',(0.500048531391,-5.00001E-02));+#6033 = CARTESIAN_POINT('',(0.250021995125,-5.00001E-02));+#6034 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6036 = ORIENTED_EDGE('',*,*,#6037,.F.);+#6037 = EDGE_CURVE('',#5318,#6002,#6038,.T.);+#6038 = SURFACE_CURVE('',#6039,(#6045,#6054),.PCURVE_S1.);+#6039 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6040,#6041,#6042,#6043,#6044),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6040 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,1.55)+ );+#6041 = CARTESIAN_POINT('',(-2.552082363801E-02,1.125081613148E-02,1.55)+ );+#6042 = CARTESIAN_POINT('',(-2.105846291746E-02,1.195339999768E-02,1.55)+ );+#6043 = CARTESIAN_POINT('',(-1.652015779256E-02,1.23046875E-02,1.55));+#6044 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,1.55));+#6045 = PCURVE('',#2112,#6046);+#6046 = DEFINITIONAL_REPRESENTATION('',(#6047),#6053);+#6047 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6048,#6049,#6050,#6051,#6052),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6048 = CARTESIAN_POINT('',(1.460002081225,-2.245949952034E-02));+#6049 = CARTESIAN_POINT('',(1.4609680133,-1.805289532624E-02));+#6050 = CARTESIAN_POINT('',(1.462283170729,-1.373124654058E-02));+#6051 = CARTESIAN_POINT('',(1.463947551449,-9.494567046717E-03));+#6052 = CARTESIAN_POINT('',(1.465961140411,-5.342867567936E-03));+#6053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6054 = PCURVE('',#6055,#6062);+#6055 = SURFACE_OF_LINEAR_EXTRUSION('',#6056,#6060);+#6056 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6057,#6058,#6059),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6057 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,1.6000001+ ));+#6058 = CARTESIAN_POINT('',(-2.113444010417E-02,1.23046875E-02,1.6000001+ ));+#6059 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,+ 1.6000001));+#6060 = VECTOR('',#6061,1.);+#6061 = DIRECTION('',(0.,0.,1.));+#6062 = DEFINITIONAL_REPRESENTATION('',(#6063),#6069);+#6063 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6064,#6065,#6066,#6067,#6068),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6064 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6065 = CARTESIAN_POINT('',(0.749999447421,-5.00001E-02));+#6066 = CARTESIAN_POINT('',(0.499998746702,-5.00001E-02));+#6067 = CARTESIAN_POINT('',(0.249998672641,-5.00001E-02));+#6068 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6070 = FACE_BOUND('',#6071,.T.);+#6071 = EDGE_LOOP('',(#6072,#6110,#6146,#6182,#6218,#6254,#6290,#6317,+ #6353,#6389,#6425,#6461,#6497,#6533,#6560,#6587,#6614,#6650,#6695,+ #6731,#6767,#6803,#6839,#6866,#6902,#6938,#6974,#7019,#7055));+#6072 = ORIENTED_EDGE('',*,*,#6073,.F.);+#6073 = EDGE_CURVE('',#6074,#6076,#6078,.T.);+#6074 = VERTEX_POINT('',#6075);+#6075 = CARTESIAN_POINT('',(0.184285481771,-5.525716145833E-03,1.55));+#6076 = VERTEX_POINT('',#6077);+#6077 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.55));+#6078 = SURFACE_CURVE('',#6079,(#6085,#6094),.PCURVE_S1.);+#6079 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6080,#6081,#6082,#6083,#6084),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6080 = CARTESIAN_POINT('',(0.184285481771,-5.525716145834E-03,1.55));+#6081 = CARTESIAN_POINT('',(0.179841872383,1.427342917217E-04,1.55));+#6082 = CARTESIAN_POINT('',(0.174087845071,4.662300692093E-03,1.55));+#6083 = CARTESIAN_POINT('',(0.167023658918,8.032513269711E-03,1.55));+#6084 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.55));+#6085 = PCURVE('',#2112,#6086);+#6086 = DEFINITIONAL_REPRESENTATION('',(#6087),#6093);+#6087 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6088,#6089,#6090,#6091,#6092),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6088 = CARTESIAN_POINT('',(1.567619486609,0.163401234044));+#6089 = CARTESIAN_POINT('',(1.560580114445,0.16187669008));+#6090 = CARTESIAN_POINT('',(1.554002612769,0.158671727918));+#6091 = CARTESIAN_POINT('',(1.547887517335,0.153786375663));+#6092 = CARTESIAN_POINT('',(1.54223495938,0.147222128106));+#6093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6094 = PCURVE('',#6095,#6102);+#6095 = SURFACE_OF_LINEAR_EXTRUSION('',#6096,#6100);+#6096 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6097,#6098,#6099),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6097 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.6000001));+#6098 = CARTESIAN_POINT('',(0.175398763021,5.810546875E-03,1.6000001));+#6099 = CARTESIAN_POINT('',(0.184285481771,-5.525716145833E-03,1.6000001+ ));+#6100 = VECTOR('',#6101,1.);+#6101 = DIRECTION('',(0.,0.,1.));+#6102 = DEFINITIONAL_REPRESENTATION('',(#6103),#6109);+#6103 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6104,#6105,#6106,#6107,#6108),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6104 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6105 = CARTESIAN_POINT('',(0.749985933321,-5.00001E-02));+#6106 = CARTESIAN_POINT('',(0.49996910655,-5.00001E-02));+#6107 = CARTESIAN_POINT('',(0.249967737562,-5.00001E-02));+#6108 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6110 = ORIENTED_EDGE('',*,*,#6111,.F.);+#6111 = EDGE_CURVE('',#6112,#6074,#6114,.T.);+#6112 = VERTEX_POINT('',#6113);+#6113 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.55));+#6114 = SURFACE_CURVE('',#6115,(#6121,#6130),.PCURVE_S1.);+#6115 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6116,#6117,#6118,#6119,#6120),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6116 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.55));+#6117 = CARTESIAN_POINT('',(0.193172200521,-2.535093221009E-02,1.55));+#6118 = CARTESIAN_POINT('',(0.191691428833,-1.780261221155E-02,1.55));+#6119 = CARTESIAN_POINT('',(0.188729035454,-1.119409552421E-02,1.55));+#6120 = CARTESIAN_POINT('',(0.184285481771,-5.525716145834E-03,1.55));+#6121 = PCURVE('',#2112,#6122);+#6122 = DEFINITIONAL_REPRESENTATION('',(#6123),#6129);+#6123 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6124,#6125,#6126,#6127,#6128),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6124 = CARTESIAN_POINT('',(1.596971673552,0.159042092437));+#6125 = CARTESIAN_POINT('',(1.589335453527,0.162745686214));+#6126 = CARTESIAN_POINT('',(1.581897593454,0.164707332749));+#6127 = CARTESIAN_POINT('',(1.574658770528,0.164925758897));+#6128 = CARTESIAN_POINT('',(1.567619486609,0.163401234044));+#6129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6130 = PCURVE('',#6131,#6138);+#6131 = SURFACE_OF_LINEAR_EXTRUSION('',#6132,#6136);+#6132 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6133,#6134,#6135),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6133 = CARTESIAN_POINT('',(0.184285481771,-5.525716145833E-03,1.6000001+ ));+#6134 = CARTESIAN_POINT('',(0.193172200521,-1.686197916667E-02,1.6000001+ ));+#6135 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.6000001)+ );+#6136 = VECTOR('',#6137,1.);+#6137 = DIRECTION('',(0.,0.,1.));+#6138 = DEFINITIONAL_REPRESENTATION('',(#6139),#6145);+#6139 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6140,#6141,#6142,#6143,#6144),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6140 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6141 = CARTESIAN_POINT('',(0.750029374395,-5.00001E-02));+#6142 = CARTESIAN_POINT('',(0.500026877819,-5.00001E-02));+#6143 = CARTESIAN_POINT('',(0.250010932525,-5.00001E-02));+#6144 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6146 = ORIENTED_EDGE('',*,*,#6147,.F.);+#6147 = EDGE_CURVE('',#6148,#6112,#6150,.T.);+#6148 = VERTEX_POINT('',#6149);+#6149 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,1.55));+#6150 = SURFACE_CURVE('',#6151,(#6157,#6166),.PCURVE_S1.);+#6151 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6152,#6153,#6154,#6155,#6156),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6152 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,1.55));+#6153 = CARTESIAN_POINT('',(0.185282434413,-6.40014265904E-02,1.55));+#6154 = CARTESIAN_POINT('',(0.190543521245,-5.562632884675E-02,1.55));+#6155 = CARTESIAN_POINT('',(0.193172200521,-4.557011146715E-02,1.55));+#6156 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.55));+#6157 = PCURVE('',#2112,#6158);+#6158 = DEFINITIONAL_REPRESENTATION('',(#6159),#6165);+#6159 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6160,#6161,#6162,#6163,#6164),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6160 = CARTESIAN_POINT('',(1.623248176278,0.128760291977));+#6161 = CARTESIAN_POINT('',(1.620668609352,0.138780242945));+#6162 = CARTESIAN_POINT('',(1.615428904092,0.147168734207));+#6163 = CARTESIAN_POINT('',(1.607527848727,0.153922310063));+#6164 = CARTESIAN_POINT('',(1.596971673552,0.159042092437));+#6165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6166 = PCURVE('',#6167,#6174);+#6167 = SURFACE_OF_LINEAR_EXTRUSION('',#6168,#6172);+#6168 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6169,#6170,#6171),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6169 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.6000001)+ );+#6170 = CARTESIAN_POINT('',(0.193172200521,-5.730794270833E-02,1.6000001+ ));+#6171 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,1.6000001+ ));+#6172 = VECTOR('',#6173,1.);+#6173 = DIRECTION('',(0.,0.,1.));+#6174 = DEFINITIONAL_REPRESENTATION('',(#6175),#6181);+#6175 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6176,#6177,#6178,#6179,#6180),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6176 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6177 = CARTESIAN_POINT('',(0.749998571255,-5.00001E-02));+#6178 = CARTESIAN_POINT('',(0.499959176196,-5.00001E-02));+#6179 = CARTESIAN_POINT('',(0.249940238745,-5.00001E-02));+#6180 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6182 = ORIENTED_EDGE('',*,*,#6183,.F.);+#6183 = EDGE_CURVE('',#6184,#6148,#6186,.T.);+#6184 = VERTEX_POINT('',#6185);+#6185 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.55));+#6186 = SURFACE_CURVE('',#6187,(#6193,#6202),.PCURVE_S1.);+#6187 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6188,#6189,#6190,#6191,#6192),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6188 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.55));+#6189 = CARTESIAN_POINT('',(0.147649851185,-8.408203125E-02,1.55));+#6190 = CARTESIAN_POINT('',(0.159585993711,-8.185290391141E-02,1.55));+#6191 = CARTESIAN_POINT('',(0.169500860318,-7.739012663451E-02,1.55));+#6192 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,1.55));+#6193 = PCURVE('',#2112,#6194);+#6194 = DEFINITIONAL_REPRESENTATION('',(#6195),#6201);+#6195 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6196,#6197,#6198,#6199,#6200),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6196 = CARTESIAN_POINT('',(1.616226245706,8.360515215099E-02));+#6197 = CARTESIAN_POINT('',(1.62231397082,9.615707096594E-02));+#6198 = CARTESIAN_POINT('',(1.625517063734,0.107869487578));+#6199 = CARTESIAN_POINT('',(1.625828351822,0.11873797692));+#6200 = CARTESIAN_POINT('',(1.623248176278,0.128760291977));+#6201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6202 = PCURVE('',#6203,#6210);+#6203 = SURFACE_OF_LINEAR_EXTRUSION('',#6204,#6208);+#6204 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6205,#6206,#6207),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6205 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,1.6000001+ ));+#6206 = CARTESIAN_POINT('',(0.161612955729,-8.408203125E-02,1.6000001));+#6207 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.6000001));+#6208 = VECTOR('',#6209,1.);+#6209 = DIRECTION('',(0.,0.,1.));+#6210 = DEFINITIONAL_REPRESENTATION('',(#6211),#6217);+#6211 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6212,#6213,#6214,#6215,#6216),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6212 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6213 = CARTESIAN_POINT('',(0.750114619013,-5.00001E-02));+#6214 = CARTESIAN_POINT('',(0.500116770761,-5.00001E-02));+#6215 = CARTESIAN_POINT('',(0.250060413632,-5.00001E-02));+#6216 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6218 = ORIENTED_EDGE('',*,*,#6219,.F.);+#6219 = EDGE_CURVE('',#6220,#6184,#6222,.T.);+#6220 = VERTEX_POINT('',#6221);+#6221 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,1.55));+#6222 = SURFACE_CURVE('',#6223,(#6229,#6238),.PCURVE_S1.);+#6223 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6224,#6225,#6226,#6227,#6228),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6224 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,1.55));+#6225 = CARTESIAN_POINT('',(0.11586903572,-8.299965585124E-02,1.55));+#6226 = CARTESIAN_POINT('',(0.121888439355,-8.372123559316E-02,1.55));+#6227 = CARTESIAN_POINT('',(0.127831949395,-8.408203125E-02,1.55));+#6228 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.55));+#6229 = PCURVE('',#2112,#6230);+#6230 = DEFINITIONAL_REPRESENTATION('',(#6231),#6237);+#6231 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6232,#6233,#6234,#6235,#6236),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6232 = CARTESIAN_POINT('',(1.603837637408,6.302235891085E-02));+#6233 = CARTESIAN_POINT('',(1.607471375755,6.803431968118E-02));+#6234 = CARTESIAN_POINT('',(1.610747410131,7.313544663577E-02));+#6235 = CARTESIAN_POINT('',(1.613665706723,7.83257289111E-02));+#6236 = CARTESIAN_POINT('',(1.616226245706,8.360515215099E-02));+#6237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6238 = PCURVE('',#6239,#6246);+#6239 = SURFACE_OF_LINEAR_EXTRUSION('',#6240,#6244);+#6240 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6241,#6242,#6243),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6241 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.6000001));+#6242 = CARTESIAN_POINT('',(0.121964518229,-8.408203125E-02,1.6000001));+#6243 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,1.6000001+ ));+#6244 = VECTOR('',#6245,1.);+#6245 = DIRECTION('',(0.,0.,1.));+#6246 = DEFINITIONAL_REPRESENTATION('',(#6247),#6253);+#6247 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6248,#6249,#6250,#6251,#6252),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6248 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6249 = CARTESIAN_POINT('',(0.75000430263,-5.00001E-02));+#6250 = CARTESIAN_POINT('',(0.500005193579,-5.00001E-02));+#6251 = CARTESIAN_POINT('',(0.25000348765,-5.00001E-02));+#6252 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6254 = ORIENTED_EDGE('',*,*,#6255,.F.);+#6255 = EDGE_CURVE('',#6256,#6220,#6258,.T.);+#6256 = VERTEX_POINT('',#6257);+#6257 = CARTESIAN_POINT('',(8.584798177083E-02,-7.565104166667E-02,1.55)+ );+#6258 = SURFACE_CURVE('',#6259,(#6265,#6274),.PCURVE_S1.);+#6259 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6260,#6261,#6262,#6263,#6264),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6260 = CARTESIAN_POINT('',(8.584798177083E-02,-7.565104166667E-02,1.55)+ );+#6261 = CARTESIAN_POINT('',(9.171547982205E-02,-7.770181768457E-02,1.55)+ );+#6262 = CARTESIAN_POINT('',(9.765895264465E-02,-7.942979428428E-02,1.55)+ );+#6263 = CARTESIAN_POINT('',(0.103678385944,-8.083496103113E-02,1.55));+#6264 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,1.55));+#6265 = PCURVE('',#2112,#6266);+#6266 = DEFINITIONAL_REPRESENTATION('',(#6267),#6273);+#6267 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6268,#6269,#6270,#6271,#6272),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6268 = CARTESIAN_POINT('',(1.587758609979,4.42294320291E-02));+#6269 = CARTESIAN_POINT('',(1.592164311567,4.861383725387E-02));+#6270 = CARTESIAN_POINT('',(1.596312725728,5.320746678496E-02));+#6271 = CARTESIAN_POINT('',(1.600203836836,5.801031231417E-02));+#6272 = CARTESIAN_POINT('',(1.603837637408,6.302235891085E-02));+#6273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6274 = PCURVE('',#6275,#6282);+#6275 = SURFACE_OF_LINEAR_EXTRUSION('',#6276,#6280);+#6276 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6277,#6278,#6279),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6277 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,1.6000001+ ));+#6278 = CARTESIAN_POINT('',(9.75830078125E-02,-7.975260416667E-02,+ 1.6000001));+#6279 = CARTESIAN_POINT('',(8.584798177083E-02,-7.565104166667E-02,+ 1.6000001));+#6280 = VECTOR('',#6281,1.);+#6281 = DIRECTION('',(0.,0.,1.));+#6282 = DEFINITIONAL_REPRESENTATION('',(#6283),#6289);+#6283 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6284,#6285,#6286,#6287,#6288),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6284 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6285 = CARTESIAN_POINT('',(0.750000637818,-5.00001E-02));+#6286 = CARTESIAN_POINT('',(0.500000410796,-5.00001E-02));+#6287 = CARTESIAN_POINT('',(0.249999978373,-5.00001E-02));+#6288 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6290 = ORIENTED_EDGE('',*,*,#6291,.T.);+#6291 = EDGE_CURVE('',#6256,#6292,#6294,.T.);+#6292 = VERTEX_POINT('',#6293);+#6293 = CARTESIAN_POINT('',(8.584798177083E-02,-5.275065104167E-02,1.55)+ );+#6294 = SURFACE_CURVE('',#6295,(#6299,#6306),.PCURVE_S1.);+#6295 = LINE('',#6296,#6297);+#6296 = CARTESIAN_POINT('',(8.584798177083E-02,0.628998707888,1.55));+#6297 = VECTOR('',#6298,1.);+#6298 = DIRECTION('',(0.,1.,0.));+#6299 = PCURVE('',#2112,#6300);+#6300 = DEFINITIONAL_REPRESENTATION('',(#6301),#6305);+#6301 = LINE('',#6302,#6303);+#6302 = CARTESIAN_POINT('',(0.953743422785,0.351729044964));+#6303 = VECTOR('',#6304,1.);+#6304 = DIRECTION('',(-0.899759330922,0.436386464522));+#6305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6306 = PCURVE('',#6307,#6312);+#6307 = PLANE('',#6308);+#6308 = AXIS2_PLACEMENT_3D('',#6309,#6310,#6311);+#6309 = CARTESIAN_POINT('',(8.584798177083E-02,-7.565104166667E-02,+ 1.6000001));+#6310 = DIRECTION('',(1.,0.,0.));+#6311 = DIRECTION('',(0.,1.,0.));+#6312 = DEFINITIONAL_REPRESENTATION('',(#6313),#6316);+#6313 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6314,#6315),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.704649749555,-0.68174935893),.PIECEWISE_BEZIER_KNOTS.);+#6314 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6315 = CARTESIAN_POINT('',(2.2900390625E-02,-5.00001E-02));+#6316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6317 = ORIENTED_EDGE('',*,*,#6318,.F.);+#6318 = EDGE_CURVE('',#6319,#6292,#6321,.T.);+#6319 = VERTEX_POINT('',#6320);+#6320 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,1.55));+#6321 = SURFACE_CURVE('',#6322,(#6328,#6337),.PCURVE_S1.);+#6322 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6323,#6324,#6325,#6326,#6327),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6323 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,1.55));+#6324 = CARTESIAN_POINT('',(0.103108541779,-6.027013444661E-02,1.55));+#6325 = CARTESIAN_POINT('',(9.741183879907E-02,-5.827626396888E-02,1.55)+ );+#6326 = CARTESIAN_POINT('',(9.165830387934E-02,-5.57697399804E-02,1.55)+ );+#6327 = CARTESIAN_POINT('',(8.584798177083E-02,-5.275065104167E-02,1.55)+ );+#6328 = PCURVE('',#2112,#6329);+#6329 = DEFINITIONAL_REPRESENTATION('',(#6330),#6336);+#6330 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6331,#6332,#6333,#6334,#6335),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6331 = CARTESIAN_POINT('',(1.585245610092,7.089993039026E-02));+#6332 = CARTESIAN_POINT('',(1.581451769947,6.647180167637E-02));+#6333 = CARTESIAN_POINT('',(1.577171802307,6.22162381031E-02));+#6334 = CARTESIAN_POINT('',(1.572405769198,5.813325451486E-02));+#6335 = CARTESIAN_POINT('',(1.567153769832,5.422285253012E-02));+#6336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6337 = PCURVE('',#6338,#6345);+#6338 = SURFACE_OF_LINEAR_EXTRUSION('',#6339,#6343);+#6339 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6340,#6341,#6342),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6340 = CARTESIAN_POINT('',(8.584798177083E-02,-5.275065104167E-02,+ 1.6000001));+#6341 = CARTESIAN_POINT('',(9.746907552083E-02,-5.87890625E-02,1.6000001+ ));+#6342 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,1.6000001+ ));+#6343 = VECTOR('',#6344,1.);+#6344 = DIRECTION('',(0.,0.,1.));+#6345 = DEFINITIONAL_REPRESENTATION('',(#6346),#6352);+#6346 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6347,#6348,#6349,#6350,#6351),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6347 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6348 = CARTESIAN_POINT('',(0.749991924175,-5.00001E-02));+#6349 = CARTESIAN_POINT('',(0.499988168793,-5.00001E-02));+#6350 = CARTESIAN_POINT('',(0.249990329374,-5.00001E-02));+#6351 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6353 = ORIENTED_EDGE('',*,*,#6354,.F.);+#6354 = EDGE_CURVE('',#6355,#6319,#6357,.T.);+#6355 = VERTEX_POINT('',#6356);+#6356 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,1.55));+#6357 = SURFACE_CURVE('',#6358,(#6364,#6373),.PCURVE_S1.);+#6358 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6359,#6360,#6361,#6362,#6363),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6359 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,1.55));+#6360 = CARTESIAN_POINT('',(0.125610304676,-6.471354166667E-02,1.55));+#6361 = CARTESIAN_POINT('',(0.120008595928,-6.421982677639E-02,1.55));+#6362 = CARTESIAN_POINT('',(0.114387940447,-6.323240076354E-02,1.55));+#6363 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,1.55));+#6364 = PCURVE('',#2112,#6365);+#6365 = DEFINITIONAL_REPRESENTATION('',(#6366),#6372);+#6366 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6367,#6368,#6369,#6370,#6371),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6367 = CARTESIAN_POINT('',(1.597705459259,8.980204270795E-02));+#6368 = CARTESIAN_POINT('',(1.595269231811,8.477893003818E-02));+#6369 = CARTESIAN_POINT('',(1.592380497356,7.995419081853E-02));+#6370 = CARTESIAN_POINT('',(1.589039273613,7.532785295037E-02));+#6371 = CARTESIAN_POINT('',(1.585245610092,7.089993039026E-02));+#6372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6373 = PCURVE('',#6374,#6381);+#6374 = SURFACE_OF_LINEAR_EXTRUSION('',#6375,#6379);+#6375 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6376,#6377,#6378),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6376 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,1.6000001+ ));+#6377 = CARTESIAN_POINT('',(0.120027669271,-6.471354166667E-02,1.6000001+ ));+#6378 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,1.6000001+ ));+#6379 = VECTOR('',#6380,1.);+#6380 = DIRECTION('',(0.,0.,1.));+#6381 = DEFINITIONAL_REPRESENTATION('',(#6382),#6388);+#6382 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6383,#6384,#6385,#6386,#6387),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6383 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6384 = CARTESIAN_POINT('',(0.749997900374,-5.00001E-02));+#6385 = CARTESIAN_POINT('',(0.499996224564,-5.00001E-02));+#6386 = CARTESIAN_POINT('',(0.249996436572,-5.00001E-02));+#6387 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6389 = ORIENTED_EDGE('',*,*,#6390,.F.);+#6390 = EDGE_CURVE('',#6391,#6355,#6393,.T.);+#6391 = VERTEX_POINT('',#6392);+#6392 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,1.55));+#6393 = SURFACE_CURVE('',#6394,(#6400,#6409),.PCURVE_S1.);+#6394 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6395,#6396,#6397,#6398,#6399),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6395 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,1.55));+#6396 = CARTESIAN_POINT('',(0.155175113256,-6.044164364543E-02,1.55));+#6397 = CARTESIAN_POINT('',(0.148642049314,-6.329004768059E-02,1.55));+#6398 = CARTESIAN_POINT('',(0.140647224396,-6.471354166667E-02,1.55));+#6399 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,1.55));+#6400 = PCURVE('',#2112,#6401);+#6401 = DEFINITIONAL_REPRESENTATION('',(#6402),#6408);+#6402 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6403,#6404,#6405,#6406,#6407),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6403 = CARTESIAN_POINT('',(1.602695306109,0.119671399797));+#6404 = CARTESIAN_POINT('',(1.604327233996,0.113244340899));+#6405 = CARTESIAN_POINT('',(1.604039171429,0.106123150691));+#6406 = CARTESIAN_POINT('',(1.601831140045,9.830853886454E-02));+#6407 = CARTESIAN_POINT('',(1.597705459259,8.980204270795E-02));+#6408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6409 = PCURVE('',#6410,#6417);+#6410 = SURFACE_OF_LINEAR_EXTRUSION('',#6411,#6415);+#6411 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6412,#6413,#6414),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6412 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,1.6000001+ ));+#6413 = CARTESIAN_POINT('',(0.150105794271,-6.471354166667E-02,1.6000001+ ));+#6414 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,1.6000001+ ));+#6415 = VECTOR('',#6416,1.);+#6416 = DIRECTION('',(0.,0.,1.));+#6417 = DEFINITIONAL_REPRESENTATION('',(#6418),#6424);+#6418 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6419,#6420,#6421,#6422,#6423),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6419 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6420 = CARTESIAN_POINT('',(0.749967061357,-5.00001E-02));+#6421 = CARTESIAN_POINT('',(0.499939428968,-5.00001E-02));+#6422 = CARTESIAN_POINT('',(0.249942111406,-5.00001E-02));+#6423 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6425 = ORIENTED_EDGE('',*,*,#6426,.F.);+#6426 = EDGE_CURVE('',#6427,#6391,#6429,.T.);+#6427 = VERTEX_POINT('',#6428);+#6428 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,1.55));+#6429 = SURFACE_CURVE('',#6430,(#6436,#6445),.PCURVE_S1.);+#6430 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6431,#6432,#6433,#6434,#6435),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6431 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,1.55));+#6432 = CARTESIAN_POINT('',(0.170385742188,-3.959038518211E-02,1.55));+#6433 = CARTESIAN_POINT('',(0.168696203678,-4.636990155302E-02,1.55));+#6434 = CARTESIAN_POINT('',(0.165315902669,-5.18960345897E-02,1.55));+#6435 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,1.55));+#6436 = PCURVE('',#2112,#6437);+#6437 = DEFINITIONAL_REPRESENTATION('',(#6438),#6444);+#6438 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6439,#6440,#6441,#6442,#6443),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6439 = CARTESIAN_POINT('',(1.58497773871,0.139534134132));+#6440 = CARTESIAN_POINT('',(1.592203832214,0.136029453171));+#6441 = CARTESIAN_POINT('',(1.597566473591,0.131550785952));+#6442 = CARTESIAN_POINT('',(1.601063545749,0.126097798919));+#6443 = CARTESIAN_POINT('',(1.602695306109,0.119671399797));+#6444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6445 = PCURVE('',#6446,#6453);+#6446 = SURFACE_OF_LINEAR_EXTRUSION('',#6447,#6451);+#6447 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6448,#6449,#6450),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6448 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,1.6000001+ ));+#6449 = CARTESIAN_POINT('',(0.170385742188,-4.762369791667E-02,1.6000001+ ));+#6450 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,1.6000001+ ));+#6451 = VECTOR('',#6452,1.);+#6452 = DIRECTION('',(0.,0.,1.));+#6453 = DEFINITIONAL_REPRESENTATION('',(#6454),#6460);+#6454 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6455,#6456,#6457,#6458,#6459),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6455 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6456 = CARTESIAN_POINT('',(0.750033806692,-5.00001E-02));+#6457 = CARTESIAN_POINT('',(0.50002739482,-5.00001E-02));+#6458 = CARTESIAN_POINT('',(0.250007271247,-5.00001E-02));+#6459 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6461 = ORIENTED_EDGE('',*,*,#6462,.F.);+#6462 = EDGE_CURVE('',#6463,#6427,#6465,.T.);+#6463 = VERTEX_POINT('',#6464);+#6464 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.55));+#6465 = SURFACE_CURVE('',#6466,(#6472,#6481),.PCURVE_S1.);+#6466 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6467,#6468,#6469,#6470,#6471),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6467 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.55));+#6468 = CARTESIAN_POINT('',(0.165315724435,-1.239011026793E-02,1.55));+#6469 = CARTESIAN_POINT('',(0.168696041216,-1.776416654089E-02,1.55));+#6470 = CARTESIAN_POINT('',(0.170385742188,-2.415429141473E-02,1.55));+#6471 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,1.55));+#6472 = PCURVE('',#2112,#6473);+#6473 = DEFINITIONAL_REPRESENTATION('',(#6474),#6480);+#6474 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6475,#6476,#6477,#6478,#6479),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6475 = CARTESIAN_POINT('',(1.559384137144,0.140677470253));+#6476 = CARTESIAN_POINT('',(1.565517643935,0.143337489194));+#6477 = CARTESIAN_POINT('',(1.5718281257,0.144033795342));+#6478 = CARTESIAN_POINT('',(1.578315062814,0.142765555556));+#6479 = CARTESIAN_POINT('',(1.58497773871,0.139534134132));+#6480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6481 = PCURVE('',#6482,#6489);+#6482 = SURFACE_OF_LINEAR_EXTRUSION('',#6483,#6487);+#6483 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6484,#6485,#6486),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6484 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,1.6000001+ ));+#6485 = CARTESIAN_POINT('',(0.170385742188,-1.6748046875E-02,1.6000001)+ );+#6486 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.6000001)+ );+#6487 = VECTOR('',#6488,1.);+#6488 = DIRECTION('',(0.,0.,1.));+#6489 = DEFINITIONAL_REPRESENTATION('',(#6490),#6496);+#6490 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6491,#6492,#6493,#6494,#6495),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6491 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6492 = CARTESIAN_POINT('',(0.750001517403,-5.00001E-02));+#6493 = CARTESIAN_POINT('',(0.499986478381,-5.00001E-02));+#6494 = CARTESIAN_POINT('',(0.249978206307,-5.00001E-02));+#6495 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6497 = ORIENTED_EDGE('',*,*,#6498,.F.);+#6498 = EDGE_CURVE('',#6499,#6463,#6501,.T.);+#6499 = VERTEX_POINT('',#6500);+#6500 = CARTESIAN_POINT('',(0.132788085938,6.8359375E-04,1.55));+#6501 = SURFACE_CURVE('',#6502,(#6508,#6517),.PCURVE_S1.);+#6502 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6503,#6504,#6505,#6506,#6507),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6503 = CARTESIAN_POINT('',(0.132788085938,6.835937499998E-04,1.55));+#6504 = CARTESIAN_POINT('',(0.141445524941,6.8359375E-04,1.55));+#6505 = CARTESIAN_POINT('',(0.148908498987,-7.685680671714E-04,1.55));+#6506 = CARTESIAN_POINT('',(0.15517538296,-3.673974055603E-03,1.55));+#6507 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.55));+#6508 = PCURVE('',#2112,#6509);+#6509 = DEFINITIONAL_REPRESENTATION('',(#6510),#6516);+#6510 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6511,#6512,#6513,#6514,#6515),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6511 = CARTESIAN_POINT('',(1.539559835592,0.119775630418));+#6512 = CARTESIAN_POINT('',(1.54333782479,0.127565241943));+#6513 = CARTESIAN_POINT('',(1.547901161794,0.133646418716));+#6514 = CARTESIAN_POINT('',(1.553250111283,0.138017226199));+#6515 = CARTESIAN_POINT('',(1.559384137144,0.140677470253));+#6516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6517 = PCURVE('',#6518,#6525);+#6518 = SURFACE_OF_LINEAR_EXTRUSION('',#6519,#6523);+#6519 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6520,#6521,#6522),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6520 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.6000001)+ );+#6521 = CARTESIAN_POINT('',(0.150105794271,6.8359375E-04,1.6000001));+#6522 = CARTESIAN_POINT('',(0.132788085938,6.8359375E-04,1.6000001));+#6523 = VECTOR('',#6524,1.);+#6524 = DIRECTION('',(0.,0.,1.));+#6525 = DEFINITIONAL_REPRESENTATION('',(#6526),#6532);+#6526 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6527,#6528,#6529,#6530,#6531),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6527 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6528 = CARTESIAN_POINT('',(0.750040858838,-5.00001E-02));+#6529 = CARTESIAN_POINT('',(0.500040343591,-5.00001E-02));+#6530 = CARTESIAN_POINT('',(0.250019639611,-5.00001E-02));+#6531 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6533 = ORIENTED_EDGE('',*,*,#6534,.T.);+#6534 = EDGE_CURVE('',#6499,#6535,#6537,.T.);+#6535 = VERTEX_POINT('',#6536);+#6536 = CARTESIAN_POINT('',(0.115242513021,6.8359375E-04,1.55));+#6537 = SURFACE_CURVE('',#6538,(#6542,#6549),.PCURVE_S1.);+#6538 = LINE('',#6539,#6540);+#6539 = CARTESIAN_POINT('',(-0.257018071392,6.8359375E-04,1.55));+#6540 = VECTOR('',#6541,1.);+#6541 = DIRECTION('',(-1.,0.,0.));+#6542 = PCURVE('',#2112,#6543);+#6543 = DEFINITIONAL_REPRESENTATION('',(#6544),#6548);+#6544 = LINE('',#6545,#6546);+#6545 = CARTESIAN_POINT('',(1.369453704746,-0.230956096891));+#6546 = VECTOR('',#6547,1.);+#6547 = DIRECTION('',(-0.436386464522,-0.899759330922));+#6548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6549 = PCURVE('',#6550,#6555);+#6550 = PLANE('',#6551);+#6551 = AXIS2_PLACEMENT_3D('',#6552,#6553,#6554);+#6552 = CARTESIAN_POINT('',(0.132788085938,6.8359375E-04,1.6000001));+#6553 = DIRECTION('',(0.,1.,0.));+#6554 = DIRECTION('',(-1.,0.,0.));+#6555 = DEFINITIONAL_REPRESENTATION('',(#6556),#6559);+#6556 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6557,#6558),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.38980615733,-0.372260584413),.PIECEWISE_BEZIER_KNOTS.);+#6557 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6558 = CARTESIAN_POINT('',(1.754557291667E-02,-5.00001E-02));+#6559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6560 = ORIENTED_EDGE('',*,*,#6561,.T.);+#6561 = EDGE_CURVE('',#6535,#6562,#6564,.T.);+#6562 = VERTEX_POINT('',#6563);+#6563 = CARTESIAN_POINT('',(0.115242513021,1.959635416667E-02,1.55));+#6564 = SURFACE_CURVE('',#6565,(#6569,#6576),.PCURVE_S1.);+#6565 = LINE('',#6566,#6567);+#6566 = CARTESIAN_POINT('',(0.115242513021,0.667166025597,1.55));+#6567 = VECTOR('',#6568,1.);+#6568 = DIRECTION('',(0.,1.,0.));+#6569 = PCURVE('',#2112,#6570);+#6570 = DEFINITIONAL_REPRESENTATION('',(#6571),#6575);+#6571 = LINE('',#6572,#6573);+#6572 = CARTESIAN_POINT('',(0.932229398109,0.394832749569));+#6573 = VECTOR('',#6574,1.);+#6574 = DIRECTION('',(-0.899759330922,0.436386464522));+#6575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6576 = PCURVE('',#6577,#6582);+#6577 = PLANE('',#6578);+#6578 = AXIS2_PLACEMENT_3D('',#6579,#6580,#6581);+#6579 = CARTESIAN_POINT('',(0.115242513021,6.8359375E-04,1.6000001));+#6580 = DIRECTION('',(1.,0.,0.));+#6581 = DIRECTION('',(0.,1.,0.));+#6582 = DEFINITIONAL_REPRESENTATION('',(#6583),#6586);+#6583 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6584,#6585),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.666482431847,-0.64756967143),.PIECEWISE_BEZIER_KNOTS.);+#6584 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6585 = CARTESIAN_POINT('',(1.891276041667E-02,-5.00001E-02));+#6586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6587 = ORIENTED_EDGE('',*,*,#6588,.T.);+#6588 = EDGE_CURVE('',#6562,#6589,#6591,.T.);+#6589 = VERTEX_POINT('',#6590);+#6590 = CARTESIAN_POINT('',(0.132788085938,1.959635416667E-02,1.55));+#6591 = SURFACE_CURVE('',#6592,(#6596,#6603),.PCURVE_S1.);+#6592 = LINE('',#6593,#6594);+#6593 = CARTESIAN_POINT('',(-0.265790857851,1.959635416667E-02,1.55));+#6594 = VECTOR('',#6595,1.);+#6595 = DIRECTION('',(1.,0.,-0.));+#6596 = PCURVE('',#2112,#6597);+#6597 = DEFINITIONAL_REPRESENTATION('',(#6598),#6602);+#6598 = LINE('',#6599,#6600);+#6599 = CARTESIAN_POINT('',(1.348608446821,-0.230596220712));+#6600 = VECTOR('',#6601,1.);+#6601 = DIRECTION('',(0.436386464522,0.899759330922));+#6602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6603 = PCURVE('',#6604,#6609);+#6604 = PLANE('',#6605);+#6605 = AXIS2_PLACEMENT_3D('',#6606,#6607,#6608);+#6606 = CARTESIAN_POINT('',(0.115242513021,1.959635416667E-02,1.6000001)+ );+#6607 = DIRECTION('',(0.,-1.,0.));+#6608 = DIRECTION('',(1.,0.,0.));+#6609 = DEFINITIONAL_REPRESENTATION('',(#6610),#6613);+#6610 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6611,#6612),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.381033370871,0.398578943788),.PIECEWISE_BEZIER_KNOTS.);+#6611 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6612 = CARTESIAN_POINT('',(1.754557291667E-02,-5.00001E-02));+#6613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6614 = ORIENTED_EDGE('',*,*,#6615,.F.);+#6615 = EDGE_CURVE('',#6616,#6589,#6618,.T.);+#6616 = VERTEX_POINT('',#6617);+#6617 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.55));+#6618 = SURFACE_CURVE('',#6619,(#6625,#6634),.PCURVE_S1.);+#6619 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6620,#6621,#6622,#6623,#6624),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6620 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.55));+#6621 = CARTESIAN_POINT('',(0.153067628319,2.307097191339E-02,1.55));+#6622 = CARTESIAN_POINT('',(0.147465419954,2.075430532848E-02,1.55));+#6623 = CARTESIAN_POINT('',(0.140705148255,1.959635416667E-02,1.55));+#6624 = CARTESIAN_POINT('',(0.132788085938,1.959635416667E-02,1.55));+#6625 = PCURVE('',#2112,#6626);+#6626 = DEFINITIONAL_REPRESENTATION('',(#6627),#6633);+#6627 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6628,#6629,#6630,#6631,#6632),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6628 = CARTESIAN_POINT('',(1.5270786094,0.153306758604));+#6629 = CARTESIAN_POINT('',(1.528266300996,0.147791886709));+#6630 = CARTESIAN_POINT('',(1.527906015471,0.141740285518));+#6631 = CARTESIAN_POINT('',(1.525997801767,0.135152353764));+#6632 = CARTESIAN_POINT('',(1.522542902933,0.12802890307));+#6633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6634 = PCURVE('',#6635,#6642);+#6635 = SURFACE_OF_LINEAR_EXTRUSION('',#6636,#6640);+#6636 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6637,#6638,#6639),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6637 = CARTESIAN_POINT('',(0.132788085938,1.959635416667E-02,1.6000001)+ );+#6638 = CARTESIAN_POINT('',(0.148624674479,1.959635416667E-02,1.6000001)+ );+#6639 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.6000001)+ );+#6640 = VECTOR('',#6641,1.);+#6641 = DIRECTION('',(0.,0.,1.));+#6642 = DEFINITIONAL_REPRESENTATION('',(#6643),#6649);+#6643 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6644,#6645,#6646,#6647,#6648),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6644 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6645 = CARTESIAN_POINT('',(0.74997718309,-5.00001E-02));+#6646 = CARTESIAN_POINT('',(0.499958849604,-5.00001E-02));+#6647 = CARTESIAN_POINT('',(0.249961104197,-5.00001E-02));+#6648 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6650 = ORIENTED_EDGE('',*,*,#6651,.F.);+#6651 = EDGE_CURVE('',#6652,#6616,#6654,.T.);+#6652 = VERTEX_POINT('',#6653);+#6653 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.55));+#6654 = SURFACE_CURVE('',#6655,(#6664,#6676),.PCURVE_S1.);+#6655 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6656,#6657,#6658,#6659,#6660,+ #6661,#6662,#6663),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.625004187076,+ 1.),.UNSPECIFIED.);+#6656 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.55));+#6657 = CARTESIAN_POINT('',(0.166398111979,4.203411414433E-02,1.55));+#6658 = CARTESIAN_POINT('',(0.165819614948,3.850929344085E-02,1.55));+#6659 = CARTESIAN_POINT('',(0.164662473618,3.534045195628E-02,1.55));+#6660 = CARTESIAN_POINT('',(0.161885314382,3.084002980934E-02,1.55));+#6661 = CARTESIAN_POINT('',(0.160635604604,2.928056693276E-02,1.55));+#6662 = CARTESIAN_POINT('',(0.159177618824,2.784929782101E-02,1.55));+#6663 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.55));+#6664 = PCURVE('',#2112,#6665);+#6665 = DEFINITIONAL_REPRESENTATION('',(#6666),#6675);+#6666 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6667,#6668,#6669,#6670,#6671,+ #6672,#6673,#6674),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.625004187076,+ 1.),.UNSPECIFIED.);+#6667 = CARTESIAN_POINT('',(1.513529673948,0.169754813413));+#6668 = CARTESIAN_POINT('',(1.517021279465,0.168061372362));+#6669 = CARTESIAN_POINT('',(1.519940321509,0.166002680216));+#6670 = CARTESIAN_POINT('',(1.522286555389,0.163578691975));+#6671 = CARTESIAN_POINT('',(1.525123937508,0.159115993729));+#6672 = CARTESIAN_POINT('',(1.525981722351,0.157311027204));+#6673 = CARTESIAN_POINT('',(1.526633274829,0.155374604427));+#6674 = CARTESIAN_POINT('',(1.5270786094,0.153306758604));+#6675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6676 = PCURVE('',#6677,#6684);+#6677 = SURFACE_OF_LINEAR_EXTRUSION('',#6678,#6682);+#6678 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6679,#6680,#6681),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6679 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.6000001)+ );+#6680 = CARTESIAN_POINT('',(0.166398111979,3.349609375E-02,1.6000001));+#6681 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.6000001)+ );+#6682 = VECTOR('',#6683,1.);+#6683 = DIRECTION('',(0.,0.,1.));+#6684 = DEFINITIONAL_REPRESENTATION('',(#6685),#6694);+#6685 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6686,#6687,#6688,#6689,#6690,+ #6691,#6692,#6693),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.625004187076,+ 1.),.UNSPECIFIED.);+#6686 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6687 = CARTESIAN_POINT('',(0.843758828983,-5.00001E-02));+#6688 = CARTESIAN_POINT('',(0.687508821274,-5.00001E-02));+#6689 = CARTESIAN_POINT('',(0.531254401622,-5.00001E-02));+#6690 = CARTESIAN_POINT('',(0.281249033893,-5.00001E-02));+#6691 = CARTESIAN_POINT('',(0.187498074173,-5.00001E-02));+#6692 = CARTESIAN_POINT('',(9.374807742692E-02,-5.00001E-02));+#6693 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6695 = ORIENTED_EDGE('',*,*,#6696,.F.);+#6696 = EDGE_CURVE('',#6697,#6652,#6699,.T.);+#6697 = VERTEX_POINT('',#6698);+#6698 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.55));+#6699 = SURFACE_CURVE('',#6700,(#6706,#6715),.PCURVE_S1.);+#6700 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6701,#6702,#6703,#6704,#6705),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6701 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.55));+#6702 = CARTESIAN_POINT('',(0.16226814572,6.252027777217E-02,1.55));+#6703 = CARTESIAN_POINT('',(0.165021676344,5.800073801768E-02,1.55));+#6704 = CARTESIAN_POINT('',(0.166398111979,5.246523454444E-02,1.55));+#6705 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.55));+#6706 = PCURVE('',#2112,#6707);+#6707 = DEFINITIONAL_REPRESENTATION('',(#6708),#6714);+#6708 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6709,#6710,#6711,#6712,#6713),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6709 = CARTESIAN_POINT('',(1.491831777071,0.171098036338));+#6710 = CARTESIAN_POINT('',(1.496786401212,0.173285281201));+#6711 = CARTESIAN_POINT('',(1.502054502771,0.173790530099));+#6712 = CARTESIAN_POINT('',(1.507635781553,0.172613372115));+#6713 = CARTESIAN_POINT('',(1.513529673948,0.169754813413));+#6714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6715 = PCURVE('',#6716,#6723);+#6716 = SURFACE_OF_LINEAR_EXTRUSION('',#6717,#6721);+#6717 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6718,#6719,#6720),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6718 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.6000001)+ );+#6719 = CARTESIAN_POINT('',(0.166398111979,5.901692708333E-02,1.6000001)+ );+#6720 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.6000001)+ );+#6721 = VECTOR('',#6722,1.);+#6722 = DIRECTION('',(0.,0.,1.));+#6723 = DEFINITIONAL_REPRESENTATION('',(#6724),#6730);+#6724 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6725,#6726,#6727,#6728,#6729),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6725 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6726 = CARTESIAN_POINT('',(0.749995198981,-5.00001E-02));+#6727 = CARTESIAN_POINT('',(0.499981892611,-5.00001E-02));+#6728 = CARTESIAN_POINT('',(0.249977646218,-5.00001E-02));+#6729 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6731 = ORIENTED_EDGE('',*,*,#6732,.F.);+#6732 = EDGE_CURVE('',#6733,#6697,#6735,.T.);+#6733 = VERTEX_POINT('',#6734);+#6734 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.55));+#6735 = SURFACE_CURVE('',#6736,(#6742,#6751),.PCURVE_S1.);+#6736 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6737,#6738,#6739,#6740,#6741),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6737 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.55));+#6738 = CARTESIAN_POINT('',(0.14224333364,7.303059895833E-02,1.55));+#6739 = CARTESIAN_POINT('',(0.14870929273,7.186313952391E-02,1.55));+#6740 = CARTESIAN_POINT('',(0.15400763256,6.952747169367E-02,1.55));+#6741 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.55));+#6742 = PCURVE('',#2112,#6743);+#6743 = DEFINITIONAL_REPRESENTATION('',(#6744),#6750);+#6744 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6745,#6746,#6747,#6748,#6749),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6745 = CARTESIAN_POINT('',(1.47526043875,0.15298707052));+#6746 = CARTESIAN_POINT('',(1.478591084707,0.159854331586));+#6747 = CARTESIAN_POINT('',(1.482463174254,0.165162675116));+#6748 = CARTESIAN_POINT('',(1.486876836964,0.168910651989));+#6749 = CARTESIAN_POINT('',(1.491831777071,0.171098036338));+#6750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6751 = PCURVE('',#6752,#6759);+#6752 = SURFACE_OF_LINEAR_EXTRUSION('',#6753,#6757);+#6753 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6754,#6755,#6756),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6754 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.6000001)+ );+#6755 = CARTESIAN_POINT('',(0.149877929688,7.303059895833E-02,1.6000001)+ );+#6756 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.6000001)+ );+#6757 = VECTOR('',#6758,1.);+#6758 = DIRECTION('',(0.,0.,1.));+#6759 = DEFINITIONAL_REPRESENTATION('',(#6760),#6766);+#6760 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6761,#6762,#6763,#6764,#6765),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6761 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6762 = CARTESIAN_POINT('',(0.750037090176,-5.00001E-02));+#6763 = CARTESIAN_POINT('',(0.500038564498,-5.00001E-02));+#6764 = CARTESIAN_POINT('',(0.250020744319,-5.00001E-02));+#6765 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6767 = ORIENTED_EDGE('',*,*,#6768,.F.);+#6768 = EDGE_CURVE('',#6769,#6733,#6771,.T.);+#6769 = VERTEX_POINT('',#6770);+#6770 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.55));+#6771 = SURFACE_CURVE('',#6772,(#6778,#6787),.PCURVE_S1.);+#6772 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6773,#6774,#6775,#6776,#6777),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6773 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.55));+#6774 = CARTESIAN_POINT('',(0.119059128984,7.189125166118E-02,1.55));+#6775 = CARTESIAN_POINT('',(0.124356960421,7.265081126253E-02,1.55));+#6776 = CARTESIAN_POINT('',(0.129540926247,7.303059895833E-02,1.55));+#6777 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.55));+#6778 = PCURVE('',#2112,#6779);+#6779 = DEFINITIONAL_REPRESENTATION('',(#6780),#6786);+#6780 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6781,#6782,#6783,#6784,#6785),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6781 = CARTESIAN_POINT('',(1.468162465769,0.133130558097));+#6782 = CARTESIAN_POINT('',(1.469498949967,0.138496931378));+#6783 = CARTESIAN_POINT('',(1.471127431058,0.143595166176));+#6784 = CARTESIAN_POINT('',(1.473047926054,0.148425222009));+#6785 = CARTESIAN_POINT('',(1.47526043875,0.15298707052));+#6786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6787 = PCURVE('',#6788,#6795);+#6788 = SURFACE_OF_LINEAR_EXTRUSION('',#6789,#6793);+#6789 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6790,#6791,#6792),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6790 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.6000001)+ );+#6791 = CARTESIAN_POINT('',(0.124471028646,7.303059895833E-02,1.6000001)+ );+#6792 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.6000001));+#6793 = VECTOR('',#6794,1.);+#6794 = DIRECTION('',(0.,0.,1.));+#6795 = DEFINITIONAL_REPRESENTATION('',(#6796),#6802);+#6796 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6797,#6798,#6799,#6800,#6801),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6797 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6798 = CARTESIAN_POINT('',(0.750005349776,-5.00001E-02));+#6799 = CARTESIAN_POINT('',(0.500006504731,-5.00001E-02));+#6800 = CARTESIAN_POINT('',(0.250004407194,-5.00001E-02));+#6801 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6803 = ORIENTED_EDGE('',*,*,#6804,.F.);+#6804 = EDGE_CURVE('',#6805,#6769,#6807,.T.);+#6805 = VERTEX_POINT('',#6806);+#6806 = CARTESIAN_POINT('',(9.097493489583E-02,6.3916015625E-02,1.55));+#6807 = SURFACE_CURVE('',#6808,(#6814,#6823),.PCURVE_S1.);+#6808 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6809,#6810,#6811,#6812,#6813),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6809 = CARTESIAN_POINT('',(9.097493489583E-02,6.3916015625E-02,1.55));+#6810 = CARTESIAN_POINT('',(9.689917186489E-02,6.61945683054E-02,1.55));+#6811 = CARTESIAN_POINT('',(0.102652702245,6.809344614488E-02,1.55));+#6812 = CARTESIAN_POINT('',(0.108235478337,6.961258836699E-02,1.55));+#6813 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.55));+#6814 = PCURVE('',#2112,#6815);+#6815 = DEFINITIONAL_REPRESENTATION('',(#6816),#6822);+#6816 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6817,#6818,#6819,#6820,#6821),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6817 = CARTESIAN_POINT('',(1.464419180839,0.109747630638));+#6818 = CARTESIAN_POINT('',(1.46495428863,0.116072347678));+#6819 = CARTESIAN_POINT('',(1.465756518357,0.12207778491));+#6820 = CARTESIAN_POINT('',(1.466825903888,0.127763872895));+#6821 = CARTESIAN_POINT('',(1.468162465769,0.133130558097));+#6822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6823 = PCURVE('',#6824,#6831);+#6824 = SURFACE_OF_LINEAR_EXTRUSION('',#6825,#6829);+#6825 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6826,#6827,#6828),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6826 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.6000001));+#6827 = CARTESIAN_POINT('',(0.102823893229,6.847330729167E-02,1.6000001)+ );+#6828 = CARTESIAN_POINT('',(9.097493489583E-02,6.3916015625E-02,+ 1.6000001));+#6829 = VECTOR('',#6830,1.);+#6830 = DIRECTION('',(0.,0.,1.));+#6831 = DEFINITIONAL_REPRESENTATION('',(#6832),#6838);+#6832 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6833,#6834,#6835,#6836,#6837),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6833 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6834 = CARTESIAN_POINT('',(0.750010220207,-5.00001E-02));+#6835 = CARTESIAN_POINT('',(0.500012934441,-5.00001E-02));+#6836 = CARTESIAN_POINT('',(0.250009181185,-5.00001E-02));+#6837 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6839 = ORIENTED_EDGE('',*,*,#6840,.T.);+#6840 = EDGE_CURVE('',#6805,#6841,#6843,.T.);+#6841 = VERTEX_POINT('',#6842);+#6842 = CARTESIAN_POINT('',(9.097493489583E-02,8.5107421875E-02,1.55));+#6843 = SURFACE_CURVE('',#6844,(#6848,#6855),.PCURVE_S1.);+#6844 = LINE('',#6845,#6846);+#6845 = CARTESIAN_POINT('',(9.097493489583E-02,0.698782236534,1.55));+#6846 = VECTOR('',#6847,1.);+#6847 = DIRECTION('',(0.,1.,0.));+#6848 = PCURVE('',#2112,#6849);+#6849 = DEFINITIONAL_REPRESENTATION('',(#6850),#6854);+#6850 = LINE('',#6851,#6852);+#6851 = CARTESIAN_POINT('',(0.893192374689,0.386794656225));+#6852 = VECTOR('',#6853,1.);+#6853 = DIRECTION('',(-0.899759330922,0.436386464522));+#6854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6855 = PCURVE('',#6856,#6861);+#6856 = PLANE('',#6857);+#6857 = AXIS2_PLACEMENT_3D('',#6858,#6859,#6860);+#6858 = CARTESIAN_POINT('',(9.097493489583E-02,6.3916015625E-02,+ 1.6000001));+#6859 = DIRECTION('',(1.,0.,0.));+#6860 = DIRECTION('',(0.,1.,0.));+#6861 = DEFINITIONAL_REPRESENTATION('',(#6862),#6865);+#6862 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6863,#6864),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.634866220909,-0.613674814659),.PIECEWISE_BEZIER_KNOTS.);+#6863 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6864 = CARTESIAN_POINT('',(2.119140625E-02,-5.00001E-02));+#6865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6866 = ORIENTED_EDGE('',*,*,#6867,.F.);+#6867 = EDGE_CURVE('',#6868,#6841,#6870,.T.);+#6868 = VERTEX_POINT('',#6869);+#6869 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.55));+#6870 = SURFACE_CURVE('',#6871,(#6877,#6886),.PCURVE_S1.);+#6871 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6872,#6873,#6874,#6875,#6876),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6872 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.55));+#6873 = CARTESIAN_POINT('',(0.110143612794,8.966464070782E-02,1.55));+#6874 = CARTESIAN_POINT('',(0.10425685755,8.844928506581E-02,1.55));+#6875 = CARTESIAN_POINT('',(9.786723074299E-02,8.693017780152E-02,1.55)+ );+#6876 = CARTESIAN_POINT('',(9.097493489583E-02,8.5107421875E-02,1.55));+#6877 = PCURVE('',#2112,#6878);+#6878 = DEFINITIONAL_REPRESENTATION('',(#6879),#6885);+#6879 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6880,#6881,#6882,#6883,#6884),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6880 = CARTESIAN_POINT('',(1.451145795385,0.14347302093));+#6881 = CARTESIAN_POINT('',(1.44961656674,0.138231178904));+#6882 = CARTESIAN_POINT('',(1.448141194011,0.132404151193));+#6883 = CARTESIAN_POINT('',(1.446719678295,0.125992107004));+#6884 = CARTESIAN_POINT('',(1.44535201533,0.118995273489));+#6885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6886 = PCURVE('',#6887,#6894);+#6887 = SURFACE_OF_LINEAR_EXTRUSION('',#6888,#6892);+#6888 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6889,#6890,#6891),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6889 = CARTESIAN_POINT('',(9.097493489583E-02,8.5107421875E-02,+ 1.6000001));+#6890 = CARTESIAN_POINT('',(0.104760742188,8.875325520833E-02,1.6000001)+ );+#6891 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.6000001));+#6892 = VECTOR('',#6893,1.);+#6893 = DIRECTION('',(0.,0.,1.));+#6894 = DEFINITIONAL_REPRESENTATION('',(#6895),#6901);+#6895 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6896,#6897,#6898,#6899,#6900),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6896 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6897 = CARTESIAN_POINT('',(0.749980022716,-5.00001E-02));+#6898 = CARTESIAN_POINT('',(0.499971984822,-5.00001E-02));+#6899 = CARTESIAN_POINT('',(0.249977955637,-5.00001E-02));+#6900 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6902 = ORIENTED_EDGE('',*,*,#6903,.F.);+#6903 = EDGE_CURVE('',#6904,#6868,#6906,.T.);+#6904 = VERTEX_POINT('',#6905);+#6905 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.55));+#6906 = SURFACE_CURVE('',#6907,(#6913,#6922),.PCURVE_S1.);+#6907 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6908,#6909,#6910,#6911,#6912),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6908 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.55));+#6909 = CARTESIAN_POINT('',(0.130452278728,9.239908854167E-02,1.55));+#6910 = CARTESIAN_POINT('',(0.12588537208,9.209524056903E-02,1.55));+#6911 = CARTESIAN_POINT('',(0.12091035839,9.148758176107E-02,1.55));+#6912 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.55));+#6913 = PCURVE('',#2112,#6914);+#6914 = DEFINITIONAL_REPRESENTATION('',(#6915),#6921);+#6915 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6916,#6917,#6918,#6919,#6920),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6916 = CARTESIAN_POINT('',(1.457833459522,0.161439217212));+#6917 = CARTESIAN_POINT('',(1.456018648713,0.1576973666));+#6918 = CARTESIAN_POINT('',(1.454299102515,0.153455654587));+#6919 = CARTESIAN_POINT('',(1.452674820563,0.148714165519));+#6920 = CARTESIAN_POINT('',(1.451145795385,0.14347302093));+#6921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6922 = PCURVE('',#6923,#6930);+#6923 = SURFACE_OF_LINEAR_EXTRUSION('',#6924,#6928);+#6924 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6925,#6926,#6927),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6925 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.6000001));+#6926 = CARTESIAN_POINT('',(0.126293945313,9.239908854167E-02,1.6000001)+ );+#6927 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.6000001)+ );+#6928 = VECTOR('',#6929,1.);+#6929 = DIRECTION('',(0.,0.,1.));+#6930 = DEFINITIONAL_REPRESENTATION('',(#6931),#6937);+#6931 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6932,#6933,#6934,#6935,#6936),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6932 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6933 = CARTESIAN_POINT('',(0.749988263247,-5.00001E-02));+#6934 = CARTESIAN_POINT('',(0.49998331624,-5.00001E-02));+#6935 = CARTESIAN_POINT('',(0.249986711609,-5.00001E-02));+#6936 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6938 = ORIENTED_EDGE('',*,*,#6939,.F.);+#6939 = EDGE_CURVE('',#6940,#6904,#6942,.T.);+#6940 = VERTEX_POINT('',#6941);+#6941 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.55));+#6942 = SURFACE_CURVE('',#6943,(#6949,#6958),.PCURVE_S1.);+#6943 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6944,#6945,#6946,#6947,#6948),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6944 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.55));+#6945 = CARTESIAN_POINT('',(0.16688117258,8.616226189022E-02,1.55));+#6946 = CARTESIAN_POINT('',(0.157783837159,9.032117394453E-02,1.55));+#6947 = CARTESIAN_POINT('',(0.147025592991,9.239908854167E-02,1.55));+#6948 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.55));+#6949 = PCURVE('',#2112,#6950);+#6950 = DEFINITIONAL_REPRESENTATION('',(#6951),#6957);+#6951 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6952,#6953,#6954,#6955,#6956),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6952 = CARTESIAN_POINT('',(1.486385385097,0.19172034779));+#6953 = CARTESIAN_POINT('',(1.477527367882,0.187752937026));+#6954 = CARTESIAN_POINT('',(1.469815393914,0.181382417522));+#6955 = CARTESIAN_POINT('',(1.463251018729,0.172609360752));+#6956 = CARTESIAN_POINT('',(1.457833459522,0.161439217212));+#6957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6958 = PCURVE('',#6959,#6966);+#6959 = SURFACE_OF_LINEAR_EXTRUSION('',#6960,#6964);+#6960 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#6961,#6962,#6963),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6961 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.6000001)+ );+#6962 = CARTESIAN_POINT('',(0.159448242188,9.239908854167E-02,1.6000001)+ );+#6963 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.6000001)+ );+#6964 = VECTOR('',#6965,1.);+#6965 = DIRECTION('',(0.,0.,1.));+#6966 = DEFINITIONAL_REPRESENTATION('',(#6967),#6973);+#6967 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6968,#6969,#6970,#6971,#6972),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6968 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#6969 = CARTESIAN_POINT('',(0.749961271666,-5.00001E-02));+#6970 = CARTESIAN_POINT('',(0.499920059766,-5.00001E-02));+#6971 = CARTESIAN_POINT('',(0.249918883794,-5.00001E-02));+#6972 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#6973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6974 = ORIENTED_EDGE('',*,*,#6975,.F.);+#6975 = EDGE_CURVE('',#6976,#6940,#6978,.T.);+#6976 = VERTEX_POINT('',#6977);+#6977 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.55));+#6978 = SURFACE_CURVE('',#6979,(#6988,#7000),.PCURVE_S1.);+#6979 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6980,#6981,#6982,#6983,#6984,+ #6985,#6986,#6987),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.58400787386,+ 1.),.UNSPECIFIED.);+#6980 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.55));+#6981 = CARTESIAN_POINT('',(0.189184570313,5.284693465058E-02,1.55));+#6982 = CARTESIAN_POINT('',(0.188339645079,5.840555520736E-02,1.55));+#6983 = CARTESIAN_POINT('',(0.186649297891,6.35013691003E-02,1.55));+#6984 = CARTESIAN_POINT('',(0.182307568517,7.143397505401E-02,1.55));+#6985 = CARTESIAN_POINT('',(0.180072577333,7.449890446467E-02,1.55));+#6986 = CARTESIAN_POINT('',(0.177408779917,7.732875228601E-02,1.55));+#6987 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.55));+#6988 = PCURVE('',#2112,#6989);+#6989 = DEFINITIONAL_REPRESENTATION('',(#6990),#6999);+#6990 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#6991,#6992,#6993,#6994,#6995,+ #6996,#6997,#6998),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.58400787386,+ 1.),.UNSPECIFIED.);+#6991 = CARTESIAN_POINT('',(1.522653282799,0.190654889997));+#6992 = CARTESIAN_POINT('',(1.517236045312,0.193282269378));+#6993 = CARTESIAN_POINT('',(1.511865910664,0.194947746788));+#6994 = CARTESIAN_POINT('',(1.506543259931,0.195650585341));+#6995 = CARTESIAN_POINT('',(1.497511151775,0.195205755691));+#6996 = CARTESIAN_POINT('',(1.493778133038,0.194532295229));+#6997 = CARTESIAN_POINT('',(1.490069505919,0.193370425934));+#6998 = CARTESIAN_POINT('',(1.486385385097,0.19172034779));+#6999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7000 = PCURVE('',#7001,#7008);+#7001 = SURFACE_OF_LINEAR_EXTRUSION('',#7002,#7006);+#7002 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7003,#7004,#7005),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7003 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.6000001)+ );+#7004 = CARTESIAN_POINT('',(0.189184570313,6.744791666667E-02,1.6000001)+ );+#7005 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.6000001));+#7006 = VECTOR('',#7007,1.);+#7007 = DIRECTION('',(0.,0.,1.));+#7008 = DEFINITIONAL_REPRESENTATION('',(#7009),#7018);+#7009 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7010,#7011,#7012,#7013,#7014,+ #7015,#7016,#7017),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.58400787386,+ 1.),.UNSPECIFIED.);+#7010 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7011 = CARTESIAN_POINT('',(0.854019074613,-5.00001E-02));+#7012 = CARTESIAN_POINT('',(0.708019087651,-5.00001E-02));+#7013 = CARTESIAN_POINT('',(0.562009550797,-5.00001E-02));+#7014 = CARTESIAN_POINT('',(0.311996567527,-5.00001E-02));+#7015 = CARTESIAN_POINT('',(0.207993127143,-5.00001E-02));+#7016 = CARTESIAN_POINT('',(0.103993124297,-5.00001E-02));+#7017 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7019 = ORIENTED_EDGE('',*,*,#7020,.F.);+#7020 = EDGE_CURVE('',#7021,#6976,#7023,.T.);+#7021 = VERTEX_POINT('',#7022);+#7022 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.55));+#7023 = SURFACE_CURVE('',#7024,(#7030,#7039),.PCURVE_S1.);+#7024 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7025,#7026,#7027,#7028,#7029),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7025 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.55));+#7026 = CARTESIAN_POINT('',(0.185282469722,2.814137228581E-02,1.55));+#7027 = CARTESIAN_POINT('',(0.187884040303,3.359136942461E-02,1.55));+#7028 = CARTESIAN_POINT('',(0.189184570313,3.981986645785E-02,1.55));+#7029 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.55));+#7030 = PCURVE('',#2112,#7031);+#7031 = DEFINITIONAL_REPRESENTATION('',(#7032),#7038);+#7032 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7033,#7034,#7035,#7036,#7037),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7033 = CARTESIAN_POINT('',(1.540262451583,0.173440547944));+#7034 = CARTESIAN_POINT('',(1.537762281695,0.178990144948));+#7035 = CARTESIAN_POINT('',(1.533993886104,0.183709237336));+#7036 = CARTESIAN_POINT('',(1.528957271473,0.187597433147));+#7037 = CARTESIAN_POINT('',(1.522653282799,0.190654889997));+#7038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7039 = PCURVE('',#7040,#7047);+#7040 = SURFACE_OF_LINEAR_EXTRUSION('',#7041,#7045);+#7041 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7042,#7043,#7044),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7042 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.6000001));+#7043 = CARTESIAN_POINT('',(0.189184570313,3.28125E-02,1.6000001));+#7044 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.6000001)+ );+#7045 = VECTOR('',#7046,1.);+#7046 = DIRECTION('',(0.,0.,1.));+#7047 = DEFINITIONAL_REPRESENTATION('',(#7048),#7054);+#7048 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7049,#7050,#7051,#7052,#7053),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7049 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7050 = CARTESIAN_POINT('',(0.749994849094,-5.00001E-02));+#7051 = CARTESIAN_POINT('',(0.499983944147,-5.00001E-02));+#7052 = CARTESIAN_POINT('',(0.24998107133,-5.00001E-02));+#7053 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7055 = ORIENTED_EDGE('',*,*,#7056,.F.);+#7056 = EDGE_CURVE('',#6076,#7021,#7057,.T.);+#7057 = SURFACE_CURVE('',#7058,(#7064,#7073),.PCURVE_S1.);+#7058 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7059,#7060,#7061,#7062,#7063),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7059 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.55));+#7060 = CARTESIAN_POINT('',(0.166112413021,1.219052986646E-02,1.55));+#7061 = CARTESIAN_POINT('',(0.172388437102,1.503861921026E-02,1.55));+#7062 = CARTESIAN_POINT('',(0.177477782821,1.879853541114E-02,1.55));+#7063 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.55));+#7064 = PCURVE('',#2112,#7065);+#7065 = DEFINITIONAL_REPRESENTATION('',(#7066),#7072);+#7066 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7067,#7068,#7069,#7070,#7071),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7067 = CARTESIAN_POINT('',(1.54223495938,0.147222128106));+#7068 = CARTESIAN_POINT('',(1.543748647729,0.154780975827));+#7069 = CARTESIAN_POINT('',(1.543924824727,0.161670754695));+#7070 = CARTESIAN_POINT('',(1.542762726626,0.167890717531));+#7071 = CARTESIAN_POINT('',(1.540262451583,0.173440547944));+#7072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7073 = PCURVE('',#7074,#7081);+#7074 = SURFACE_OF_LINEAR_EXTRUSION('',#7075,#7079);+#7075 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7076,#7077,#7078),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7076 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.6000001)+ );+#7077 = CARTESIAN_POINT('',(0.173575846354,1.412760416667E-02,1.6000001)+ );+#7078 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.6000001));+#7079 = VECTOR('',#7080,1.);+#7080 = DIRECTION('',(0.,0.,1.));+#7081 = DEFINITIONAL_REPRESENTATION('',(#7082),#7088);+#7082 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7083,#7084,#7085,#7086,#7087),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7083 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7084 = CARTESIAN_POINT('',(0.750029086145,-5.00001E-02));+#7085 = CARTESIAN_POINT('',(0.500029839919,-5.00001E-02));+#7086 = CARTESIAN_POINT('',(0.250015665801,-5.00001E-02));+#7087 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7089 = FACE_BOUND('',#7090,.T.);+#7090 = EDGE_LOOP('',(#7091,#7120,#7147,#7183,#7219,#7255,#7291));+#7091 = ORIENTED_EDGE('',*,*,#7092,.T.);+#7092 = EDGE_CURVE('',#7093,#7095,#7097,.T.);+#7093 = VERTEX_POINT('',#7094);+#7094 = CARTESIAN_POINT('',(0.226326497396,-8.077799479167E-02,1.55));+#7095 = VERTEX_POINT('',#7096);+#7096 = CARTESIAN_POINT('',(0.226326497396,8.932291666667E-02,1.55));+#7097 = SURFACE_CURVE('',#7098,(#7102,#7109),.PCURVE_S1.);+#7098 = LINE('',#7099,#7100);+#7099 = CARTESIAN_POINT('',(0.226326497396,0.626435231326,1.55));+#7100 = VECTOR('',#7101,1.);+#7101 = DIRECTION('',(0.,1.,0.));+#7102 = PCURVE('',#2112,#7103);+#7103 = DEFINITIONAL_REPRESENTATION('',(#7104),#7108);+#7104 = LINE('',#7105,#7106);+#7105 = CARTESIAN_POINT('',(1.017352857516,0.477007233717));+#7106 = VECTOR('',#7107,1.);+#7107 = DIRECTION('',(-0.899759330922,0.436386464522));+#7108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7109 = PCURVE('',#7110,#7115);+#7110 = PLANE('',#7111);+#7111 = AXIS2_PLACEMENT_3D('',#7112,#7113,#7114);+#7112 = CARTESIAN_POINT('',(0.226326497396,-8.077799479167E-02,1.6000001+ ));+#7113 = DIRECTION('',(1.,0.,0.));+#7114 = DIRECTION('',(0.,1.,0.));+#7115 = DEFINITIONAL_REPRESENTATION('',(#7116),#7119);+#7116 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7117,#7118),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707213226117,-0.537112314659),.PIECEWISE_BEZIER_KNOTS.);+#7117 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7118 = CARTESIAN_POINT('',(0.170100911458,-5.00001E-02));+#7119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7120 = ORIENTED_EDGE('',*,*,#7121,.T.);+#7121 = EDGE_CURVE('',#7095,#7122,#7124,.T.);+#7122 = VERTEX_POINT('',#7123);+#7123 = CARTESIAN_POINT('',(0.260847981771,8.932291666667E-02,1.55));+#7124 = SURFACE_CURVE('',#7125,(#7129,#7136),.PCURVE_S1.);+#7125 = LINE('',#7126,#7127);+#7126 = CARTESIAN_POINT('',(-0.210248865663,8.932291666667E-02,1.55));+#7127 = VECTOR('',#7128,1.);+#7128 = DIRECTION('',(1.,0.,-0.));+#7129 = PCURVE('',#2112,#7130);+#7130 = DEFINITIONAL_REPRESENTATION('',(#7131),#7135);+#7131 = LINE('',#7132,#7133);+#7132 = CARTESIAN_POINT('',(1.310109095201,-0.150194066891));+#7133 = VECTOR('',#7134,1.);+#7134 = DIRECTION('',(0.436386464522,0.899759330922));+#7135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7136 = PCURVE('',#7137,#7142);+#7137 = PLANE('',#7138);+#7138 = AXIS2_PLACEMENT_3D('',#7139,#7140,#7141);+#7139 = CARTESIAN_POINT('',(0.226326497396,8.932291666667E-02,1.6000001)+ );+#7140 = DIRECTION('',(0.,-1.,0.));+#7141 = DIRECTION('',(1.,0.,0.));+#7142 = DEFINITIONAL_REPRESENTATION('',(#7143),#7146);+#7143 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7144,#7145),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.436575363059,0.471096847434),.PIECEWISE_BEZIER_KNOTS.);+#7144 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7145 = CARTESIAN_POINT('',(3.4521484375E-02,-5.00001E-02));+#7146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7147 = ORIENTED_EDGE('',*,*,#7148,.F.);+#7148 = EDGE_CURVE('',#7149,#7122,#7151,.T.);+#7149 = VERTEX_POINT('',#7150);+#7150 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.55));+#7151 = SURFACE_CURVE('',#7152,(#7158,#7167),.PCURVE_S1.);+#7152 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7153,#7154,#7155,#7156,#7157),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7153 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.55));+#7154 = CARTESIAN_POINT('',(0.309037074032,7.895987204302E-02,1.55));+#7155 = CARTESIAN_POINT('',(0.296382513314,8.587406713477E-02,1.55));+#7156 = CARTESIAN_POINT('',(0.280310421483,8.932291666667E-02,1.55));+#7157 = CARTESIAN_POINT('',(0.260847981771,8.932291666667E-02,1.55));+#7158 = PCURVE('',#2112,#7159);+#7159 = DEFINITIONAL_REPRESENTATION('',(#7160),#7166);+#7160 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7161,#7162,#7163,#7164,#7165),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7161 = CARTESIAN_POINT('',(1.559404630857,0.316296816374));+#7162 = CARTESIAN_POINT('',(1.546042696598,0.312516010361));+#7163 = CARTESIAN_POINT('',(1.534299306036,0.304147212428));+#7164 = CARTESIAN_POINT('',(1.524182528158,0.291191229089));+#7165 = CARTESIAN_POINT('',(1.515689382901,0.273679717356));+#7166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7167 = PCURVE('',#7168,#7175);+#7168 = SURFACE_OF_LINEAR_EXTRUSION('',#7169,#7173);+#7169 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7170,#7171,#7172),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7170 = CARTESIAN_POINT('',(0.260847981771,8.932291666667E-02,1.6000001)+ );+#7171 = CARTESIAN_POINT('',(0.299812825521,8.932291666667E-02,1.6000001)+ );+#7172 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.6000001)+ );+#7173 = VECTOR('',#7174,1.);+#7174 = DIRECTION('',(0.,0.,1.));+#7175 = DEFINITIONAL_REPRESENTATION('',(#7176),#7182);+#7176 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7177,#7178,#7179,#7180,#7181),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7177 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7178 = CARTESIAN_POINT('',(0.749884404112,-5.00001E-02));+#7179 = CARTESIAN_POINT('',(0.499751543718,-5.00001E-02));+#7180 = CARTESIAN_POINT('',(0.249743587285,-5.00001E-02));+#7181 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7183 = ORIENTED_EDGE('',*,*,#7184,.F.);+#7184 = EDGE_CURVE('',#7185,#7149,#7187,.T.);+#7185 = VERTEX_POINT('',#7186);+#7186 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.55));+#7187 = SURFACE_CURVE('',#7188,(#7194,#7203),.PCURVE_S1.);+#7188 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7189,#7190,#7191,#7192,#7193),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7189 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.55));+#7190 = CARTESIAN_POINT('',(0.336726888021,2.594541253406E-02,1.55));+#7191 = CARTESIAN_POINT('',(0.333659486311,4.399355348003E-02,1.55));+#7192 = CARTESIAN_POINT('',(0.327506216794,5.821058819956E-02,1.55));+#7193 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.55));+#7194 = PCURVE('',#2112,#7195);+#7195 = DEFINITIONAL_REPRESENTATION('',(#7196),#7202);+#7196 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7197,#7198,#7199,#7200,#7201),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7197 = CARTESIAN_POINT('',(1.625480619136,0.304763025828));+#7198 = CARTESIAN_POINT('',(1.605826411245,0.314295386316));+#7199 = CARTESIAN_POINT('',(1.588248855435,0.319411427424));+#7200 = CARTESIAN_POINT('',(1.572771742258,0.320079087278));+#7201 = CARTESIAN_POINT('',(1.559404630857,0.316296816374));+#7202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7203 = PCURVE('',#7204,#7211);+#7204 = SURFACE_OF_LINEAR_EXTRUSION('',#7205,#7209);+#7205 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7206,#7207,#7208),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7206 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.6000001)+ );+#7207 = CARTESIAN_POINT('',(0.336726888021,4.78515625E-02,1.6000001));+#7208 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.6000001));+#7209 = VECTOR('',#7210,1.);+#7210 = DIRECTION('',(0.,0.,1.));+#7211 = DEFINITIONAL_REPRESENTATION('',(#7212),#7218);+#7212 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7213,#7214,#7215,#7216,#7217),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7213 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7214 = CARTESIAN_POINT('',(0.750355999611,-5.00001E-02));+#7215 = CARTESIAN_POINT('',(0.500379704821,-5.00001E-02));+#7216 = CARTESIAN_POINT('',(0.250212504325,-5.00001E-02));+#7217 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7219 = ORIENTED_EDGE('',*,*,#7220,.F.);+#7220 = EDGE_CURVE('',#7221,#7185,#7223,.T.);+#7221 = VERTEX_POINT('',#7222);+#7222 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,1.55));+#7223 = SURFACE_CURVE('',#7224,(#7230,#7239),.PCURVE_S1.);+#7224 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7225,#7226,#7227,#7228,#7229),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7225 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,1.55));+#7226 = CARTESIAN_POINT('',(0.327506079843,-4.975129319017E-02,1.55));+#7227 = CARTESIAN_POINT('',(0.333659363604,-3.559149257639E-02,1.55));+#7228 = CARTESIAN_POINT('',(0.336726888021,-1.762895079675E-02,1.55));+#7229 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.55));+#7230 = PCURVE('',#2112,#7231);+#7231 = DEFINITIONAL_REPRESENTATION('',(#7232),#7238);+#7232 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7233,#7234,#7235,#7236,#7237),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7233 = CARTESIAN_POINT('',(1.675191531084,0.26013975938));+#7234 = CARTESIAN_POINT('',(1.669911392659,0.272965860332));+#7235 = CARTESIAN_POINT('',(1.659856189679,0.28468148014));+#7236 = CARTESIAN_POINT('',(1.645032851241,0.295280123958));+#7237 = CARTESIAN_POINT('',(1.625480619136,0.304763025828));+#7238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7239 = PCURVE('',#7240,#7247);+#7240 = SURFACE_OF_LINEAR_EXTRUSION('',#7241,#7245);+#7241 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7242,#7243,#7244),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7242 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.6000001));+#7243 = CARTESIAN_POINT('',(0.336726888021,-3.942057291667E-02,1.6000001+ ));+#7244 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,1.6000001+ ));+#7245 = VECTOR('',#7246,1.);+#7246 = DIRECTION('',(0.,0.,1.));+#7247 = DEFINITIONAL_REPRESENTATION('',(#7248),#7254);+#7248 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7249,#7250,#7251,#7252,#7253),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7249 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7250 = CARTESIAN_POINT('',(0.749791205669,-5.00001E-02));+#7251 = CARTESIAN_POINT('',(0.499626104162,-5.00001E-02));+#7252 = CARTESIAN_POINT('',(0.249648978488,-5.00001E-02));+#7253 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7255 = ORIENTED_EDGE('',*,*,#7256,.F.);+#7256 = EDGE_CURVE('',#7257,#7221,#7259,.T.);+#7257 = VERTEX_POINT('',#7258);+#7258 = CARTESIAN_POINT('',(0.260847981771,-8.077799479167E-02,1.55));+#7259 = SURFACE_CURVE('',#7260,(#7266,#7275),.PCURVE_S1.);+#7260 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7261,#7262,#7263,#7264,#7265),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7261 = CARTESIAN_POINT('',(0.260847981771,-8.077799479167E-02,1.55));+#7262 = CARTESIAN_POINT('',(0.280310390999,-8.077799479167E-02,1.55));+#7263 = CARTESIAN_POINT('',(0.296382462898,-7.733863090279E-02,1.55));+#7264 = CARTESIAN_POINT('',(0.309037045065,-7.044345252415E-02,1.55));+#7265 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,1.55));+#7266 = PCURVE('',#2112,#7267);+#7267 = DEFINITIONAL_REPRESENTATION('',(#7268),#7274);+#7268 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7269,#7270,#7271,#7272,#7273),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7269 = CARTESIAN_POINT('',(1.668739265184,0.199449981993));+#7270 = CARTESIAN_POINT('',(1.677232397138,0.216961466298));+#7271 = CARTESIAN_POINT('',(1.68115143202,0.232923354804));+#7272 = CARTESIAN_POINT('',(1.680469719307,0.247318395703));+#7273 = CARTESIAN_POINT('',(1.675191531084,0.26013975938));+#7274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7275 = PCURVE('',#7276,#7283);+#7276 = SURFACE_OF_LINEAR_EXTRUSION('',#7277,#7281);+#7277 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7278,#7279,#7280),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7278 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,1.6000001+ ));+#7279 = CARTESIAN_POINT('',(0.299812825521,-8.077799479167E-02,1.6000001+ ));+#7280 = CARTESIAN_POINT('',(0.260847981771,-8.077799479167E-02,1.6000001+ ));+#7281 = VECTOR('',#7282,1.);+#7282 = DIRECTION('',(0.,0.,1.));+#7283 = DEFINITIONAL_REPRESENTATION('',(#7284),#7290);+#7284 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7285,#7286,#7287,#7288,#7289),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7285 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7286 = CARTESIAN_POINT('',(0.750256803888,-5.00001E-02));+#7287 = CARTESIAN_POINT('',(0.500249240434,-5.00001E-02));+#7288 = CARTESIAN_POINT('',(0.250116380592,-5.00001E-02));+#7289 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7291 = ORIENTED_EDGE('',*,*,#7292,.T.);+#7292 = EDGE_CURVE('',#7257,#7093,#7293,.T.);+#7293 = SURFACE_CURVE('',#7294,(#7298,#7305),.PCURVE_S1.);+#7294 = LINE('',#7295,#7296);+#7295 = CARTESIAN_POINT('',(-0.192988123476,-8.077799479167E-02,1.55));+#7296 = VECTOR('',#7297,1.);+#7297 = DIRECTION('',(-1.,0.,0.));+#7298 = PCURVE('',#2112,#7299);+#7299 = DEFINITIONAL_REPRESENTATION('',(#7300),#7304);+#7300 = LINE('',#7301,#7302);+#7301 = CARTESIAN_POINT('',(1.470691331743,-0.208893288412));+#7302 = VECTOR('',#7303,1.);+#7303 = DIRECTION('',(-0.436386464522,-0.899759330922));+#7304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7305 = PCURVE('',#7306,#7311);+#7306 = PLANE('',#7307);+#7307 = AXIS2_PLACEMENT_3D('',#7308,#7309,#7310);+#7308 = CARTESIAN_POINT('',(0.260847981771,-8.077799479167E-02,1.6000001+ ));+#7309 = DIRECTION('',(0.,1.,0.));+#7310 = DIRECTION('',(-1.,0.,0.));+#7311 = DEFINITIONAL_REPRESENTATION('',(#7312),#7315);+#7312 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7313,#7314),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.453836105246,-0.419314620871),.PIECEWISE_BEZIER_KNOTS.);+#7313 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7314 = CARTESIAN_POINT('',(3.4521484375E-02,-5.00001E-02));+#7315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7316 = FACE_BOUND('',#7317,.T.);+#7317 = EDGE_LOOP('',(#7318,#7347,#7374,#7401,#7437,#7482,#7518,#7554,+ #7590,#7626,#7671));+#7318 = ORIENTED_EDGE('',*,*,#7319,.T.);+#7319 = EDGE_CURVE('',#7320,#7322,#7324,.T.);+#7320 = VERTEX_POINT('',#7321);+#7321 = CARTESIAN_POINT('',(0.420467122396,-8.077799479167E-02,1.55));+#7322 = VERTEX_POINT('',#7323);+#7323 = CARTESIAN_POINT('',(0.370109049479,-8.077799479167E-02,1.55));+#7324 = SURFACE_CURVE('',#7325,(#7329,#7336),.PCURVE_S1.);+#7325 = LINE('',#7326,#7327);+#7326 = CARTESIAN_POINT('',(-0.113178553163,-8.077799479167E-02,1.55));+#7327 = VECTOR('',#7328,1.);+#7328 = DIRECTION('',(-1.,0.,0.));+#7329 = PCURVE('',#2112,#7330);+#7330 = DEFINITIONAL_REPRESENTATION('',(#7331),#7335);+#7331 = LINE('',#7332,#7333);+#7332 = CARTESIAN_POINT('',(1.505519147966,-0.137083882827));+#7333 = VECTOR('',#7334,1.);+#7334 = DIRECTION('',(-0.436386464522,-0.899759330922));+#7335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7336 = PCURVE('',#7337,#7342);+#7337 = PLANE('',#7338);+#7338 = AXIS2_PLACEMENT_3D('',#7339,#7340,#7341);+#7339 = CARTESIAN_POINT('',(0.420467122396,-8.077799479167E-02,1.6000001+ ));+#7340 = DIRECTION('',(0.,1.,0.));+#7341 = DIRECTION('',(-1.,0.,0.));+#7342 = DEFINITIONAL_REPRESENTATION('',(#7343),#7346);+#7343 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7344,#7345),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.533645675559,-0.483287602642),.PIECEWISE_BEZIER_KNOTS.);+#7344 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7345 = CARTESIAN_POINT('',(5.035807291667E-02,-5.00001E-02));+#7346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7347 = ORIENTED_EDGE('',*,*,#7348,.T.);+#7348 = EDGE_CURVE('',#7322,#7349,#7351,.T.);+#7349 = VERTEX_POINT('',#7350);+#7350 = CARTESIAN_POINT('',(0.370109049479,8.932291666667E-02,1.55));+#7351 = SURFACE_CURVE('',#7352,(#7356,#7363),.PCURVE_S1.);+#7352 = LINE('',#7353,#7354);+#7353 = CARTESIAN_POINT('',(0.370109049479,0.626435231326,1.55));+#7354 = VECTOR('',#7355,1.);+#7355 = DIRECTION('',(0.,1.,0.));+#7356 = PCURVE('',#2112,#7357);+#7357 = DEFINITIONAL_REPRESENTATION('',(#7358),#7362);+#7358 = LINE('',#7359,#7360);+#7359 = CARTESIAN_POINT('',(1.08009761708,0.606376926578));+#7360 = VECTOR('',#7361,1.);+#7361 = DIRECTION('',(-0.899759330922,0.436386464522));+#7362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7363 = PCURVE('',#7364,#7369);+#7364 = PLANE('',#7365);+#7365 = AXIS2_PLACEMENT_3D('',#7366,#7367,#7368);+#7366 = CARTESIAN_POINT('',(0.370109049479,-8.077799479167E-02,1.6000001+ ));+#7367 = DIRECTION('',(1.,0.,0.));+#7368 = DIRECTION('',(0.,1.,0.));+#7369 = DEFINITIONAL_REPRESENTATION('',(#7370),#7373);+#7370 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7371,#7372),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.707213226117,-0.537112314659),.PIECEWISE_BEZIER_KNOTS.);+#7371 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7372 = CARTESIAN_POINT('',(0.170100911458,-5.00001E-02));+#7373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7374 = ORIENTED_EDGE('',*,*,#7375,.T.);+#7375 = EDGE_CURVE('',#7349,#7376,#7378,.T.);+#7376 = VERTEX_POINT('',#7377);+#7377 = CARTESIAN_POINT('',(0.420467122396,8.932291666667E-02,1.55));+#7378 = SURFACE_CURVE('',#7379,(#7383,#7390),.PCURVE_S1.);+#7379 = LINE('',#7380,#7381);+#7380 = CARTESIAN_POINT('',(-0.138357589621,8.932291666667E-02,1.55));+#7381 = VECTOR('',#7382,1.);+#7382 = DIRECTION('',(1.,0.,-0.));+#7383 = PCURVE('',#2112,#7384);+#7384 = DEFINITIONAL_REPRESENTATION('',(#7385),#7389);+#7385 = LINE('',#7386,#7387);+#7386 = CARTESIAN_POINT('',(1.341481474983,-8.550922046054E-02));+#7387 = VECTOR('',#7388,1.);+#7388 = DIRECTION('',(0.436386464522,0.899759330922));+#7389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7390 = PCURVE('',#7391,#7396);+#7391 = PLANE('',#7392);+#7392 = AXIS2_PLACEMENT_3D('',#7393,#7394,#7395);+#7393 = CARTESIAN_POINT('',(0.370109049479,8.932291666667E-02,1.6000001)+ );+#7394 = DIRECTION('',(0.,-1.,0.));+#7395 = DIRECTION('',(1.,0.,0.));+#7396 = DEFINITIONAL_REPRESENTATION('',(#7397),#7400);+#7397 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7398,#7399),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.508466639101,0.558824712017),.PIECEWISE_BEZIER_KNOTS.);+#7398 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7399 = CARTESIAN_POINT('',(5.035807291667E-02,-5.00001E-02));+#7400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7401 = ORIENTED_EDGE('',*,*,#7402,.F.);+#7402 = EDGE_CURVE('',#7403,#7376,#7405,.T.);+#7403 = VERTEX_POINT('',#7404);+#7404 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.55));+#7405 = SURFACE_CURVE('',#7406,(#7412,#7421),.PCURVE_S1.);+#7406 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7407,#7408,#7409,#7410,#7411),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7407 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.55));+#7408 = CARTESIAN_POINT('',(0.453619558805,8.368475360105E-02,1.55));+#7409 = CARTESIAN_POINT('',(0.44455942265,8.744469974171E-02,1.55));+#7410 = CARTESIAN_POINT('',(0.433506591556,8.932291666667E-02,1.55));+#7411 = CARTESIAN_POINT('',(0.420467122396,8.932291666667E-02,1.55));+#7412 = PCURVE('',#2112,#7413);+#7413 = DEFINITIONAL_REPRESENTATION('',(#7414),#7420);+#7414 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7415,#7416,#7417,#7418,#7419),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7415 = CARTESIAN_POINT('',(1.613044301972,0.448563005851));+#7416 = CARTESIAN_POINT('',(1.60488527969,0.444667324482));+#7417 = CARTESIAN_POINT('',(1.597548512282,0.43815617204));+#7418 = CARTESIAN_POINT('',(1.591035263194,0.429030912574));+#7419 = CARTESIAN_POINT('',(1.585345015348,0.417298528527));+#7420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7421 = PCURVE('',#7422,#7429);+#7422 = SURFACE_OF_LINEAR_EXTRUSION('',#7423,#7427);+#7423 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7424,#7425,#7426),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7424 = CARTESIAN_POINT('',(0.420467122396,8.932291666667E-02,1.6000001)+ );+#7425 = CARTESIAN_POINT('',(0.446557617188,8.932291666667E-02,1.6000001)+ );+#7426 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.6000001)+ );+#7427 = VECTOR('',#7428,1.);+#7428 = DIRECTION('',(0.,0.,1.));+#7429 = DEFINITIONAL_REPRESENTATION('',(#7430),#7436);+#7430 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7431,#7432,#7433,#7434,#7435),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7431 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7432 = CARTESIAN_POINT('',(0.749934154943,-5.00001E-02));+#7433 = CARTESIAN_POINT('',(0.499882212203,-5.00001E-02));+#7434 = CARTESIAN_POINT('',(0.249889265508,-5.00001E-02));+#7435 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7437 = ORIENTED_EDGE('',*,*,#7438,.F.);+#7438 = EDGE_CURVE('',#7439,#7403,#7441,.T.);+#7439 = VERTEX_POINT('',#7440);+#7440 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.55));+#7441 = SURFACE_CURVE('',#7442,(#7451,#7463),.PCURVE_S1.);+#7442 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7443,#7444,#7445,#7446,#7447,+ #7448,#7449,#7450),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.6720144284,1.+ ),.UNSPECIFIED.);+#7443 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.55));+#7444 = CARTESIAN_POINT('',(0.474812825521,5.307029055991E-02,1.55));+#7445 = CARTESIAN_POINT('',(0.473749891982,5.929628906625E-02,1.55));+#7446 = CARTESIAN_POINT('',(0.471623200148,6.48194319554E-02,1.55));+#7447 = CARTESIAN_POINT('',(0.466876018403,7.199170529642E-02,1.55));+#7448 = CARTESIAN_POINT('',(0.465065683551,7.417658411554E-02,1.55));+#7449 = CARTESIAN_POINT('',(0.463002053036,7.619389127156E-02,1.55));+#7450 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.55));+#7451 = PCURVE('',#2112,#7452);+#7452 = DEFINITIONAL_REPRESENTATION('',(#7453),#7462);+#7453 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7454,#7455,#7456,#7457,#7458,+ #7459,#7460,#7461),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.6720144284,1.+ ),.UNSPECIFIED.);+#7454 = CARTESIAN_POINT('',(1.647912657112,0.447353266736));+#7455 = CARTESIAN_POINT('',(1.641679383207,0.450376426673));+#7456 = CARTESIAN_POINT('',(1.635613633147,0.45213698378));+#7457 = CARTESIAN_POINT('',(1.629716074266,0.452633697756));+#7458 = CARTESIAN_POINT('',(1.621191148545,0.451492259691));+#7459 = CARTESIAN_POINT('',(1.618435277815,0.45081684556));+#7460 = CARTESIAN_POINT('',(1.615719646454,0.449840400286));+#7461 = CARTESIAN_POINT('',(1.613044301972,0.448563005851));+#7462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7463 = PCURVE('',#7464,#7471);+#7464 = SURFACE_OF_LINEAR_EXTRUSION('',#7465,#7469);+#7465 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7466,#7467,#7468),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7466 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.6000001)+ );+#7467 = CARTESIAN_POINT('',(0.474812825521,6.676432291667E-02,1.6000001)+ );+#7468 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.6000001));+#7469 = VECTOR('',#7470,1.);+#7470 = DIRECTION('',(0.,0.,1.));+#7471 = DEFINITIONAL_REPRESENTATION('',(#7472),#7481);+#7472 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7473,#7474,#7475,#7476,#7477,+ #7478,#7479,#7480),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.6720144284,1.+ ),.UNSPECIFIED.);+#7473 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7474 = CARTESIAN_POINT('',(0.83202894554,-5.00001E-02));+#7475 = CARTESIAN_POINT('',(0.664028947504,-5.00001E-02));+#7476 = CARTESIAN_POINT('',(0.49601446356,-5.00001E-02));+#7477 = CARTESIAN_POINT('',(0.245998308461,-5.00001E-02));+#7478 = CARTESIAN_POINT('',(0.163996621132,-5.00001E-02));+#7479 = CARTESIAN_POINT('',(8.199662357544E-02,-5.00001E-02));+#7480 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7482 = ORIENTED_EDGE('',*,*,#7483,.F.);+#7483 = EDGE_CURVE('',#7484,#7439,#7486,.T.);+#7484 = VERTEX_POINT('',#7485);+#7485 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.55));+#7486 = SURFACE_CURVE('',#7487,(#7493,#7502),.PCURVE_S1.);+#7487 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7488,#7489,#7490,#7491,#7492),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7488 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.55));+#7489 = CARTESIAN_POINT('',(0.471081818208,2.603386061354E-02,1.55));+#7490 = CARTESIAN_POINT('',(0.473569412782,3.163600345245E-02,1.55));+#7491 = CARTESIAN_POINT('',(0.474812825521,3.833930818125E-02,1.55));+#7492 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.55));+#7493 = PCURVE('',#2112,#7494);+#7494 = DEFINITIONAL_REPRESENTATION('',(#7495),#7501);+#7495 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7496,#7497,#7498,#7499,#7500),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7496 = CARTESIAN_POINT('',(1.666798609494,0.429899556001));+#7497 = CARTESIAN_POINT('',(1.664377502235,0.435221085952));+#7498 = CARTESIAN_POINT('',(1.660422474544,0.439904021689));+#7499 = CARTESIAN_POINT('',(1.654933722055,0.443948025354));+#7500 = CARTESIAN_POINT('',(1.647912657112,0.447353266736));+#7501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7502 = PCURVE('',#7503,#7510);+#7503 = SURFACE_OF_LINEAR_EXTRUSION('',#7504,#7508);+#7504 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7505,#7506,#7507),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7505 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.6000001));+#7506 = CARTESIAN_POINT('',(0.474812825521,3.053385416667E-02,1.6000001)+ );+#7507 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.6000001));+#7508 = VECTOR('',#7509,1.);+#7509 = DIRECTION('',(0.,0.,1.));+#7510 = DEFINITIONAL_REPRESENTATION('',(#7511),#7517);+#7511 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7512,#7513,#7514,#7515,#7516),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7512 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7513 = CARTESIAN_POINT('',(0.749981558684,-5.00001E-02));+#7514 = CARTESIAN_POINT('',(0.499964377242,-5.00001E-02));+#7515 = CARTESIAN_POINT('',(0.249965018428,-5.00001E-02));+#7516 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7518 = ORIENTED_EDGE('',*,*,#7519,.F.);+#7519 = EDGE_CURVE('',#7520,#7484,#7522,.T.);+#7520 = VERTEX_POINT('',#7521);+#7521 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.55));+#7522 = SURFACE_CURVE('',#7523,(#7529,#7538),.PCURVE_S1.);+#7523 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7524,#7525,#7526,#7527,#7528),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7524 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.55));+#7525 = CARTESIAN_POINT('',(0.452424199089,1.139308701106E-02,1.55));+#7526 = CARTESIAN_POINT('',(0.458643337426,1.365246813548E-02,1.55));+#7527 = CARTESIAN_POINT('',(0.463618762984,1.703261843535E-02,1.55));+#7528 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.55));+#7529 = PCURVE('',#2112,#7530);+#7530 = DEFINITIONAL_REPRESENTATION('',(#7531),#7537);+#7531 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7532,#7533,#7534,#7535,#7536),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7532 = CARTESIAN_POINT('',(1.667177574897,0.40483388576));+#7533 = CARTESIAN_POINT('',(1.669408742452,0.412044683627));+#7534 = CARTESIAN_POINT('',(1.670089790995,0.418626374716));+#7535 = CARTESIAN_POINT('',(1.669219677591,0.424578112126));+#7536 = CARTESIAN_POINT('',(1.666798609494,0.429899556001));+#7537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7538 = PCURVE('',#7539,#7546);+#7539 = SURFACE_OF_LINEAR_EXTRUSION('',#7540,#7544);+#7540 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7541,#7542,#7543),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7541 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.6000001));+#7542 = CARTESIAN_POINT('',(0.459887695313,1.253255208333E-02,1.6000001)+ );+#7543 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.6000001));+#7544 = VECTOR('',#7545,1.);+#7545 = DIRECTION('',(0.,0.,1.));+#7546 = DEFINITIONAL_REPRESENTATION('',(#7547),#7553);+#7547 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7548,#7549,#7550,#7551,#7552),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7548 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7549 = CARTESIAN_POINT('',(0.750031193002,-5.00001E-02));+#7550 = CARTESIAN_POINT('',(0.500030400002,-5.00001E-02));+#7551 = CARTESIAN_POINT('',(0.250014397226,-5.00001E-02));+#7552 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7554 = ORIENTED_EDGE('',*,*,#7555,.F.);+#7555 = EDGE_CURVE('',#7556,#7520,#7558,.T.);+#7556 = VERTEX_POINT('',#7557);+#7557 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.55));+#7558 = SURFACE_CURVE('',#7559,(#7565,#7574),.PCURVE_S1.);+#7559 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7560,#7561,#7562,#7563,#7564),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7560 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.55));+#7561 = CARTESIAN_POINT('',(0.466467232718,1.851464737417E-03,1.55));+#7562 = CARTESIAN_POINT('',(0.460504439279,6.200230869958E-03,1.55));+#7563 = CARTESIAN_POINT('',(0.45333572349,9.000780505191E-03,1.55));+#7564 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.55));+#7565 = PCURVE('',#2112,#7566);+#7566 = DEFINITIONAL_REPRESENTATION('',(#7567),#7573);+#7567 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7568,#7569,#7570,#7571,#7572),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7568 = CARTESIAN_POINT('',(1.691502902579,0.422223146361));+#7569 = CARTESIAN_POINT('',(1.684122095922,0.420516199359));+#7570 = CARTESIAN_POINT('',(1.677607170669,0.417048863002));+#7571 = CARTESIAN_POINT('',(1.671959019464,0.411820866033));+#7572 = CARTESIAN_POINT('',(1.667177574897,0.40483388576));+#7573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7574 = PCURVE('',#7575,#7582);+#7575 = SURFACE_OF_LINEAR_EXTRUSION('',#7576,#7580);+#7576 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7577,#7578,#7579),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7577 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.6000001));+#7578 = CARTESIAN_POINT('',(0.461710611979,7.747395833333E-03,1.6000001)+ );+#7579 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.6000001+ ));+#7580 = VECTOR('',#7581,1.);+#7581 = DIRECTION('',(0.,0.,1.));+#7582 = DEFINITIONAL_REPRESENTATION('',(#7583),#7589);+#7583 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7584,#7585,#7586,#7587,#7588),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7584 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7585 = CARTESIAN_POINT('',(0.749997243984,-5.00001E-02));+#7586 = CARTESIAN_POINT('',(0.499980939984,-5.00001E-02));+#7587 = CARTESIAN_POINT('',(0.249974174549,-5.00001E-02));+#7588 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7590 = ORIENTED_EDGE('',*,*,#7591,.F.);+#7591 = EDGE_CURVE('',#7592,#7556,#7594,.T.);+#7592 = VERTEX_POINT('',#7593);+#7593 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.55));+#7594 = SURFACE_CURVE('',#7595,(#7601,#7610),.PCURVE_S1.);+#7595 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7596,#7597,#7598,#7599,#7600),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7596 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.55));+#7597 = CARTESIAN_POINT('',(0.480737304688,-2.4952507603E-02,1.55));+#7598 = CARTESIAN_POINT('',(0.479152211759,-1.691038401232E-02,1.55));+#7599 = CARTESIAN_POINT('',(0.475980910761,-9.940938585079E-03,1.55));+#7600 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.55));+#7601 = PCURVE('',#2112,#7602);+#7602 = DEFINITIONAL_REPRESENTATION('',(#7603),#7609);+#7603 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7604,#7605,#7606,#7607,#7608),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7604 = CARTESIAN_POINT('',(1.722666215964,0.417682041139));+#7605 = CARTESIAN_POINT('',(1.714466486396,0.421658939041));+#7606 = CARTESIAN_POINT('',(1.706538797556,0.42374221077));+#7607 = CARTESIAN_POINT('',(1.698884061171,0.423930174755));+#7608 = CARTESIAN_POINT('',(1.691502902579,0.422223146361));+#7609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7610 = PCURVE('',#7611,#7618);+#7611 = SURFACE_OF_LINEAR_EXTRUSION('',#7612,#7616);+#7612 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7613,#7614,#7615),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7613 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.6000001+ ));+#7614 = CARTESIAN_POINT('',(0.480737304688,-1.583658854167E-02,1.6000001+ ));+#7615 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.6000001+ ));+#7616 = VECTOR('',#7617,1.);+#7617 = DIRECTION('',(0.,0.,1.));+#7618 = DEFINITIONAL_REPRESENTATION('',(#7619),#7625);+#7619 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7620,#7621,#7622,#7623,#7624),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7620 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7621 = CARTESIAN_POINT('',(0.750036637111,-5.00001E-02));+#7622 = CARTESIAN_POINT('',(0.500034218815,-5.00001E-02));+#7623 = CARTESIAN_POINT('',(0.250014676789,-5.00001E-02));+#7624 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7626 = ORIENTED_EDGE('',*,*,#7627,.F.);+#7627 = EDGE_CURVE('',#7628,#7592,#7630,.T.);+#7628 = VERTEX_POINT('',#7629);+#7629 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.55));+#7630 = SURFACE_CURVE('',#7631,(#7640,#7652),.PCURVE_S1.);+#7631 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7632,#7633,#7634,#7635,#7636,+ #7637,#7638,#7639),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.26597848358,+ 1.),.UNSPECIFIED.);+#7632 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.55));+#7633 = CARTESIAN_POINT('',(0.467599589489,-6.741772111652E-02,1.55));+#7634 = CARTESIAN_POINT('',(0.469436255519,-6.571571069242E-02,1.55));+#7635 = CARTESIAN_POINT('',(0.471094246683,-6.387997733708E-02,1.55));+#7636 = CARTESIAN_POINT('',(0.476655941458,-5.647553177269E-02,1.55));+#7637 = CARTESIAN_POINT('',(0.479377373037,-5.00223327311E-02,1.55));+#7638 = CARTESIAN_POINT('',(0.480737304688,-4.255165394612E-02,1.55));+#7639 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.55));+#7640 = PCURVE('',#2112,#7641);+#7641 = DEFINITIONAL_REPRESENTATION('',(#7642),#7651);+#7642 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7643,#7644,#7645,#7646,#7647,+ #7648,#7649,#7650),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.26597848358,+ 1.),.UNSPECIFIED.);+#7643 = CARTESIAN_POINT('',(1.747473472572,0.388809269382));+#7644 = CARTESIAN_POINT('',(1.746941837407,0.391306912814));+#7645 = CARTESIAN_POINT('',(1.746211933842,0.393702204524));+#7646 = CARTESIAN_POINT('',(1.745283740529,0.395995086733));+#7647 = CARTESIAN_POINT('',(1.741048569862,0.404230473325));+#7648 = CARTESIAN_POINT('',(1.736429839715,0.409495195496));+#7649 = CARTESIAN_POINT('',(1.730301482535,0.41397890979));+#7650 = CARTESIAN_POINT('',(1.722666215964,0.417682041139));+#7651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7652 = PCURVE('',#7653,#7660);+#7653 = SURFACE_OF_LINEAR_EXTRUSION('',#7654,#7658);+#7654 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7655,#7656,#7657),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7655 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.6000001+ ));+#7656 = CARTESIAN_POINT('',(0.480737304688,-5.719401041667E-02,1.6000001+ ));+#7657 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.6000001+ ));+#7658 = VECTOR('',#7659,1.);+#7659 = DIRECTION('',(0.,0.,1.));+#7660 = DEFINITIONAL_REPRESENTATION('',(#7661),#7670);+#7661 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7662,#7663,#7664,#7665,#7666,+ #7667,#7668,#7669),.UNSPECIFIED.,.F.,.F.,(5,3,5),(0.,0.26597848358,+ 1.),.UNSPECIFIED.);+#7662 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7663 = CARTESIAN_POINT('',(0.933502267356,-5.00001E-02));+#7664 = CARTESIAN_POINT('',(0.867002275475,-5.00001E-02));+#7665 = CARTESIAN_POINT('',(0.80050114567,-5.00001E-02));+#7666 = CARTESIAN_POINT('',(0.550476614456,-5.00001E-02));+#7667 = CARTESIAN_POINT('',(0.366953102281,-5.00001E-02));+#7668 = CARTESIAN_POINT('',(0.183453067716,-5.00001E-02));+#7669 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7671 = ORIENTED_EDGE('',*,*,#7672,.F.);+#7672 = EDGE_CURVE('',#7320,#7628,#7673,.T.);+#7673 = SURFACE_CURVE('',#7674,(#7680,#7689),.PCURVE_S1.);+#7674 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7675,#7676,#7677,#7678,#7679),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7675 = CARTESIAN_POINT('',(0.420467122396,-8.077799479167E-02,1.55));+#7676 = CARTESIAN_POINT('',(0.435439531082,-8.077799479167E-02,1.55));+#7677 = CARTESIAN_POINT('',(0.447955424543,-7.881520545472E-02,1.55));+#7678 = CARTESIAN_POINT('',(0.458004714008,-7.488440993048E-02,1.55));+#7679 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.55));+#7680 = PCURVE('',#2112,#7681);+#7681 = DEFINITIONAL_REPRESENTATION('',(#7682),#7688);+#7682 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7683,#7684,#7685,#7686,#7687),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7683 = CARTESIAN_POINT('',(1.738394897631,0.343068793164));+#7684 = CARTESIAN_POINT('',(1.744928654123,0.356540357585));+#7685 = CARTESIAN_POINT('',(1.7486243826,0.368658184211));+#7686 = CARTESIAN_POINT('',(1.74947298655,0.379415472138));+#7687 = CARTESIAN_POINT('',(1.747473472572,0.388809269382));+#7688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7689 = PCURVE('',#7690,#7697);+#7690 = SURFACE_OF_LINEAR_EXTRUSION('',#7691,#7695);+#7691 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#7692,#7693,#7694),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7692 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.6000001+ ));+#7693 = CARTESIAN_POINT('',(0.450431315104,-8.077799479167E-02,1.6000001+ ));+#7694 = CARTESIAN_POINT('',(0.420467122396,-8.077799479167E-02,1.6000001+ ));+#7695 = VECTOR('',#7696,1.);+#7696 = DIRECTION('',(0.,0.,1.));+#7697 = DEFINITIONAL_REPRESENTATION('',(#7698),#7704);+#7698 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#7699,#7700,#7701,#7702,#7703),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7699 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#7700 = CARTESIAN_POINT('',(0.750161654088,-5.00001E-02));+#7701 = CARTESIAN_POINT('',(0.500176065104,-5.00001E-02));+#7702 = CARTESIAN_POINT('',(0.250102240254,-5.00001E-02));+#7703 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7705 = FACE_BOUND('',#7706,.T.);+#7706 = EDGE_LOOP('',(#7707,#7736,#7763,#7790,#7817,#7844,#7871));+#7707 = ORIENTED_EDGE('',*,*,#7708,.T.);+#7708 = EDGE_CURVE('',#7709,#7711,#7713,.T.);+#7709 = VERTEX_POINT('',#7710);+#7710 = CARTESIAN_POINT('',(0.498168945312,8.932291666667E-02,1.55));+#7711 = VERTEX_POINT('',#7712);+#7712 = CARTESIAN_POINT('',(0.521980794271,8.932291666667E-02,1.55));+#7713 = SURFACE_CURVE('',#7714,(#7718,#7725),.PCURVE_S1.);+#7714 = LINE('',#7715,#7716);+#7715 = CARTESIAN_POINT('',(-7.432764170475E-02,8.932291666667E-02,1.55)+ );+#7716 = VECTOR('',#7717,1.);+#7717 = DIRECTION('',(1.,0.,-0.));+#7718 = PCURVE('',#2112,#7719);+#7719 = DEFINITIONAL_REPRESENTATION('',(#7720),#7724);+#7720 = LINE('',#7721,#7722);+#7721 = CARTESIAN_POINT('',(1.369423277578,-2.789767736405E-02));+#7722 = VECTOR('',#7723,1.);+#7723 = DIRECTION('',(0.436386464522,0.899759330922));+#7724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7725 = PCURVE('',#7726,#7731);+#7726 = PLANE('',#7727);+#7727 = AXIS2_PLACEMENT_3D('',#7728,#7729,#7730);+#7728 = CARTESIAN_POINT('',(0.498168945312,8.932291666667E-02,1.6000001)+ );+#7729 = DIRECTION('',(0.,-1.,0.));+#7730 = DIRECTION('',(1.,0.,0.));+#7731 = DEFINITIONAL_REPRESENTATION('',(#7732),#7735);+#7732 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7733,#7734),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.572496587017,0.596308435976),.PIECEWISE_BEZIER_KNOTS.);+#7733 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7734 = CARTESIAN_POINT('',(2.381184895833E-02,-5.00001E-02));+#7735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7736 = ORIENTED_EDGE('',*,*,#7737,.T.);+#7737 = EDGE_CURVE('',#7711,#7738,#7740,.T.);+#7738 = VERTEX_POINT('',#7739);+#7739 = CARTESIAN_POINT('',(0.561857096354,-6.140950520833E-02,1.55));+#7740 = SURFACE_CURVE('',#7741,(#7745,#7752),.PCURVE_S1.);+#7741 = LINE('',#7742,#7743);+#7742 = CARTESIAN_POINT('',(0.329928141046,0.815281945857,1.55));+#7743 = VECTOR('',#7744,1.);+#7744 = DIRECTION('',(0.255751966392,-0.966742432961,0.));+#7745 = PCURVE('',#2112,#7746);+#7746 = DEFINITIONAL_REPRESENTATION('',(#7747),#7751);+#7747 = LINE('',#7748,#7749);+#7748 = CARTESIAN_POINT('',(0.892646618994,0.652633929381));+#7749 = VECTOR('',#7750,1.);+#7750 = DIRECTION('',(0.981442221063,-0.191758094261));+#7751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7752 = PCURVE('',#7753,#7758);+#7753 = PLANE('',#7754);+#7754 = AXIS2_PLACEMENT_3D('',#7755,#7756,#7757);+#7755 = CARTESIAN_POINT('',(0.521980794271,8.932291666667E-02,1.6000001)+ );+#7756 = DIRECTION('',(-0.966742432961,-0.255751966392,0.));+#7757 = DIRECTION('',(0.255751966392,-0.966742432961,0.));+#7758 = DEFINITIONAL_REPRESENTATION('',(#7759),#7762);+#7759 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7760,#7761),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.750933241822,0.906851112742),.PIECEWISE_BEZIER_KNOTS.);+#7760 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7761 = CARTESIAN_POINT('',(0.15591787092,-5.00001E-02));+#7762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7763 = ORIENTED_EDGE('',*,*,#7764,.T.);+#7764 = EDGE_CURVE('',#7738,#7765,#7767,.T.);+#7765 = VERTEX_POINT('',#7766);+#7766 = CARTESIAN_POINT('',(0.601847330729,8.932291666667E-02,1.55));+#7767 = SURFACE_CURVE('',#7768,(#7772,#7779),.PCURVE_S1.);+#7768 = LINE('',#7769,#7770);+#7769 = CARTESIAN_POINT('',(0.695005885901,0.440459009238,1.55));+#7770 = VECTOR('',#7771,1.);+#7771 = DIRECTION('',(0.256434699025,0.966561557862,-0.));+#7772 = PCURVE('',#2112,#7773);+#7773 = DEFINITIONAL_REPRESENTATION('',(#7774),#7778);+#7774 = LINE('',#7775,#7776);+#7775 = CARTESIAN_POINT('',(1.389212040014,0.817548380694));+#7776 = VECTOR('',#7777,1.);+#7777 = DIRECTION('',(-0.757768148909,0.652523894198));+#7778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7779 = PCURVE('',#7780,#7785);+#7780 = PLANE('',#7781);+#7781 = AXIS2_PLACEMENT_3D('',#7782,#7783,#7784);+#7782 = CARTESIAN_POINT('',(0.561857096354,-6.140950520833E-02,1.6000001+ ));+#7783 = DIRECTION('',(0.966561557862,-0.256434699025,0.));+#7784 = DIRECTION('',(0.256434699025,0.966561557862,0.));+#7785 = DEFINITIONAL_REPRESENTATION('',(#7786),#7789);+#7786 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7787,#7788),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.519230782938,-0.363283734714),.PIECEWISE_BEZIER_KNOTS.);+#7787 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7788 = CARTESIAN_POINT('',(0.155947048224,-5.00001E-02));+#7789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7790 = ORIENTED_EDGE('',*,*,#7791,.T.);+#7791 = EDGE_CURVE('',#7765,#7792,#7794,.T.);+#7792 = VERTEX_POINT('',#7793);+#7793 = CARTESIAN_POINT('',(0.625659179688,8.932291666667E-02,1.55));+#7794 = SURFACE_CURVE('',#7795,(#7799,#7806),.PCURVE_S1.);+#7795 = LINE('',#7796,#7797);+#7796 = CARTESIAN_POINT('',(-2.248844899642E-02,8.932291666667E-02,1.55)+ );+#7797 = VECTOR('',#7798,1.);+#7798 = DIRECTION('',(1.,0.,-0.));+#7799 = PCURVE('',#2112,#7800);+#7800 = DEFINITIONAL_REPRESENTATION('',(#7801),#7805);+#7801 = LINE('',#7802,#7803);+#7802 = CARTESIAN_POINT('',(1.392045199608,1.874511998275E-02));+#7803 = VECTOR('',#7804,1.);+#7804 = DIRECTION('',(0.436386464522,0.899759330922));+#7805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7806 = PCURVE('',#7807,#7812);+#7807 = PLANE('',#7808);+#7808 = AXIS2_PLACEMENT_3D('',#7809,#7810,#7811);+#7809 = CARTESIAN_POINT('',(0.601847330729,8.932291666667E-02,1.6000001)+ );+#7810 = DIRECTION('',(0.,-1.,0.));+#7811 = DIRECTION('',(1.,0.,0.));+#7812 = DEFINITIONAL_REPRESENTATION('',(#7813),#7816);+#7813 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7814,#7815),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.624335779726,0.648147628684),.PIECEWISE_BEZIER_KNOTS.);+#7814 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7815 = CARTESIAN_POINT('',(2.381184895833E-02,-5.00001E-02));+#7816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7817 = ORIENTED_EDGE('',*,*,#7818,.T.);+#7818 = EDGE_CURVE('',#7792,#7819,#7821,.T.);+#7819 = VERTEX_POINT('',#7820);+#7820 = CARTESIAN_POINT('',(0.575870768229,-8.077799479167E-02,1.55));+#7821 = SURFACE_CURVE('',#7822,(#7826,#7833),.PCURVE_S1.);+#7822 = LINE('',#7823,#7824);+#7823 = CARTESIAN_POINT('',(0.743188081565,0.490857586011,1.55));+#7824 = VECTOR('',#7825,1.);+#7825 = DIRECTION('',(-0.280913194718,-0.959733180125,0.));+#7826 = PCURVE('',#2112,#7827);+#7827 = DEFINITIONAL_REPRESENTATION('',(#7828),#7832);+#7828 = LINE('',#7829,#7830);+#7829 = CARTESIAN_POINT('',(1.364891508315,0.882894017562));+#7830 = VECTOR('',#7831,1.);+#7831 = DIRECTION('',(0.740942168133,-0.671568837487));+#7832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7833 = PCURVE('',#7834,#7839);+#7834 = PLANE('',#7835);+#7835 = AXIS2_PLACEMENT_3D('',#7836,#7837,#7838);+#7836 = CARTESIAN_POINT('',(0.625659179688,8.932291666667E-02,1.6000001)+ );+#7837 = DIRECTION('',(-0.959733180125,0.280913194718,0.));+#7838 = DIRECTION('',(-0.280913194718,-0.959733180125,0.));+#7839 = DEFINITIONAL_REPRESENTATION('',(#7840),#7843);+#7840 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7841,#7842),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.418381564439,0.595619274858),.PIECEWISE_BEZIER_KNOTS.);+#7841 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7842 = CARTESIAN_POINT('',(0.177237710419,-5.00001E-02));+#7843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7844 = ORIENTED_EDGE('',*,*,#7845,.T.);+#7845 = EDGE_CURVE('',#7819,#7846,#7848,.T.);+#7846 = VERTEX_POINT('',#7847);+#7847 = CARTESIAN_POINT('',(0.547957356771,-8.077799479167E-02,1.55));+#7848 = SURFACE_CURVE('',#7849,(#7853,#7860),.PCURVE_S1.);+#7849 = LINE('',#7850,#7851);+#7850 = CARTESIAN_POINT('',(-3.547673024642E-02,-8.077799479167E-02,1.55+ ));+#7851 = VECTOR('',#7852,1.);+#7852 = DIRECTION('',(-1.,0.,0.));+#7853 = PCURVE('',#2112,#7854);+#7854 = DEFINITIONAL_REPRESENTATION('',(#7855),#7859);+#7855 = LINE('',#7856,#7857);+#7856 = CARTESIAN_POINT('',(1.539427171756,-6.717094262788E-02));+#7857 = VECTOR('',#7858,1.);+#7858 = DIRECTION('',(-0.436386464522,-0.899759330922));+#7859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7860 = PCURVE('',#7861,#7866);+#7861 = PLANE('',#7862);+#7862 = AXIS2_PLACEMENT_3D('',#7863,#7864,#7865);+#7863 = CARTESIAN_POINT('',(0.575870768229,-8.077799479167E-02,1.6000001+ ));+#7864 = DIRECTION('',(0.,1.,0.));+#7865 = DIRECTION('',(-1.,0.,0.));+#7866 = DEFINITIONAL_REPRESENTATION('',(#7867),#7870);+#7867 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7868,#7869),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.611347498476,-0.583434087017),.PIECEWISE_BEZIER_KNOTS.);+#7868 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7869 = CARTESIAN_POINT('',(2.791341145833E-02,-5.00001E-02));+#7870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7871 = ORIENTED_EDGE('',*,*,#7872,.T.);+#7872 = EDGE_CURVE('',#7846,#7709,#7873,.T.);+#7873 = SURFACE_CURVE('',#7874,(#7878,#7885),.PCURVE_S1.);+#7874 = LINE('',#7875,#7876);+#7875 = CARTESIAN_POINT('',(0.310150023618,0.731685045018,1.55));+#7876 = VECTOR('',#7877,1.);+#7877 = DIRECTION('',(-0.280913194718,0.959733180125,0.));+#7878 = PCURVE('',#2112,#7879);+#7879 = DEFINITIONAL_REPRESENTATION('',(#7880),#7884);+#7880 = LINE('',#7881,#7882);+#7881 = CARTESIAN_POINT('',(0.959232807821,0.598357827676));+#7882 = VECTOR('',#7883,1.);+#7883 = DIRECTION('',(-0.986115599894,0.166060301232));+#7884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7885 = PCURVE('',#7886,#7891);+#7886 = PLANE('',#7887);+#7887 = AXIS2_PLACEMENT_3D('',#7888,#7889,#7890);+#7888 = CARTESIAN_POINT('',(0.547957356771,-8.077799479167E-02,1.6000001+ ));+#7889 = DIRECTION('',(0.959733180125,0.280913194718,0.));+#7890 = DIRECTION('',(-0.280913194718,0.959733180125,0.));+#7891 = DEFINITIONAL_REPRESENTATION('',(#7892),#7895);+#7892 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7893,#7894),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.846550954614,-0.669313244195),.PIECEWISE_BEZIER_KNOTS.);+#7893 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#7894 = CARTESIAN_POINT('',(0.177237710419,-5.00001E-02));+#7895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7896 = ADVANCED_FACE('',(#7897),#7886,.T.);+#7897 = FACE_BOUND('',#7898,.T.);+#7898 = EDGE_LOOP('',(#7899,#7900,#7923,#7951));+#7899 = ORIENTED_EDGE('',*,*,#7872,.F.);+#7900 = ORIENTED_EDGE('',*,*,#7901,.T.);+#7901 = EDGE_CURVE('',#7846,#7902,#7904,.T.);+#7902 = VERTEX_POINT('',#7903);+#7903 = CARTESIAN_POINT('',(0.547957356771,-8.077799479167E-02,1.5000001+ ));+#7904 = SURFACE_CURVE('',#7905,(#7909,#7916),.PCURVE_S1.);+#7905 = LINE('',#7906,#7907);+#7906 = CARTESIAN_POINT('',(0.547957356771,-8.077799479167E-02,1.6000001+ ));+#7907 = VECTOR('',#7908,1.);+#7908 = DIRECTION('',(-0.,-0.,-1.));+#7909 = PCURVE('',#7886,#7910);+#7910 = DEFINITIONAL_REPRESENTATION('',(#7911),#7915);+#7911 = LINE('',#7912,#7913);+#7912 = CARTESIAN_POINT('',(0.,0.));+#7913 = VECTOR('',#7914,1.);+#7914 = DIRECTION('',(0.,-1.));+#7915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7916 = PCURVE('',#7861,#7917);+#7917 = DEFINITIONAL_REPRESENTATION('',(#7918),#7922);+#7918 = LINE('',#7919,#7920);+#7919 = CARTESIAN_POINT('',(2.791341145833E-02,0.));+#7920 = VECTOR('',#7921,1.);+#7921 = DIRECTION('',(0.,-1.));+#7922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7923 = ORIENTED_EDGE('',*,*,#7924,.T.);+#7924 = EDGE_CURVE('',#7902,#7925,#7927,.T.);+#7925 = VERTEX_POINT('',#7926);+#7926 = CARTESIAN_POINT('',(0.498168945312,8.932291666667E-02,1.5000001)+ );+#7927 = SURFACE_CURVE('',#7928,(#7932,#7939),.PCURVE_S1.);+#7928 = LINE('',#7929,#7930);+#7929 = CARTESIAN_POINT('',(0.547957356771,-8.077799479167E-02,1.5000001+ ));+#7930 = VECTOR('',#7931,1.);+#7931 = DIRECTION('',(-0.280913194718,0.959733180125,0.));+#7932 = PCURVE('',#7886,#7933);+#7933 = DEFINITIONAL_REPRESENTATION('',(#7934),#7938);+#7934 = LINE('',#7935,#7936);+#7935 = CARTESIAN_POINT('',(0.,-0.1));+#7936 = VECTOR('',#7937,1.);+#7937 = DIRECTION('',(1.,0.));+#7938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7939 = PCURVE('',#7940,#7945);+#7940 = PLANE('',#7941);+#7941 = AXIS2_PLACEMENT_3D('',#7942,#7943,#7944);+#7942 = CARTESIAN_POINT('',(0.491674804688,-8.077799479167E-02,1.5000001+ ));+#7943 = DIRECTION('',(0.,0.,1.));+#7944 = DIRECTION('',(1.,0.,0.));+#7945 = DEFINITIONAL_REPRESENTATION('',(#7946),#7950);+#7946 = LINE('',#7947,#7948);+#7947 = CARTESIAN_POINT('',(5.628255208333E-02,0.));+#7948 = VECTOR('',#7949,1.);+#7949 = DIRECTION('',(-0.280913194718,0.959733180125));+#7950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7951 = ORIENTED_EDGE('',*,*,#7952,.F.);+#7952 = EDGE_CURVE('',#7709,#7925,#7953,.T.);+#7953 = SURFACE_CURVE('',#7954,(#7958,#7965),.PCURVE_S1.);+#7954 = LINE('',#7955,#7956);+#7955 = CARTESIAN_POINT('',(0.498168945312,8.932291666667E-02,1.6000001)+ );+#7956 = VECTOR('',#7957,1.);+#7957 = DIRECTION('',(-0.,-0.,-1.));+#7958 = PCURVE('',#7886,#7959);+#7959 = DEFINITIONAL_REPRESENTATION('',(#7960),#7964);+#7960 = LINE('',#7961,#7962);+#7961 = CARTESIAN_POINT('',(0.177237710419,0.));+#7962 = VECTOR('',#7963,1.);+#7963 = DIRECTION('',(0.,-1.));+#7964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7965 = PCURVE('',#7726,#7966);+#7966 = DEFINITIONAL_REPRESENTATION('',(#7967),#7971);+#7967 = LINE('',#7968,#7969);+#7968 = CARTESIAN_POINT('',(0.,0.));+#7969 = VECTOR('',#7970,1.);+#7970 = DIRECTION('',(0.,-1.));+#7971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7972 = ADVANCED_FACE('',(#7973),#7940,.T.);+#7973 = FACE_BOUND('',#7974,.F.);+#7974 = EDGE_LOOP('',(#7975,#8000,#8023,#8046,#8069,#8090,#8091));+#7975 = ORIENTED_EDGE('',*,*,#7976,.T.);+#7976 = EDGE_CURVE('',#7977,#7979,#7981,.T.);+#7977 = VERTEX_POINT('',#7978);+#7978 = CARTESIAN_POINT('',(0.521980794271,8.932291666667E-02,1.5000001)+ );+#7979 = VERTEX_POINT('',#7980);+#7980 = CARTESIAN_POINT('',(0.561857096354,-6.140950520833E-02,1.5000001+ ));+#7981 = SURFACE_CURVE('',#7982,(#7986,#7993),.PCURVE_S1.);+#7982 = LINE('',#7983,#7984);+#7983 = CARTESIAN_POINT('',(0.521980794271,8.932291666667E-02,1.5000001)+ );+#7984 = VECTOR('',#7985,1.);+#7985 = DIRECTION('',(0.255751966392,-0.966742432961,0.));+#7986 = PCURVE('',#7940,#7987);+#7987 = DEFINITIONAL_REPRESENTATION('',(#7988),#7992);+#7988 = LINE('',#7989,#7990);+#7989 = CARTESIAN_POINT('',(3.030598958333E-02,0.170100911458));+#7990 = VECTOR('',#7991,1.);+#7991 = DIRECTION('',(0.255751966392,-0.966742432961));+#7992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7993 = PCURVE('',#7753,#7994);+#7994 = DEFINITIONAL_REPRESENTATION('',(#7995),#7999);+#7995 = LINE('',#7996,#7997);+#7996 = CARTESIAN_POINT('',(0.,-0.1));+#7997 = VECTOR('',#7998,1.);+#7998 = DIRECTION('',(1.,0.));+#7999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8000 = ORIENTED_EDGE('',*,*,#8001,.T.);+#8001 = EDGE_CURVE('',#7979,#8002,#8004,.T.);+#8002 = VERTEX_POINT('',#8003);+#8003 = CARTESIAN_POINT('',(0.601847330729,8.932291666667E-02,1.5000001)+ );+#8004 = SURFACE_CURVE('',#8005,(#8009,#8016),.PCURVE_S1.);+#8005 = LINE('',#8006,#8007);+#8006 = CARTESIAN_POINT('',(0.561857096354,-6.140950520833E-02,1.5000001+ ));+#8007 = VECTOR('',#8008,1.);+#8008 = DIRECTION('',(0.256434699025,0.966561557862,0.));+#8009 = PCURVE('',#7940,#8010);+#8010 = DEFINITIONAL_REPRESENTATION('',(#8011),#8015);+#8011 = LINE('',#8012,#8013);+#8012 = CARTESIAN_POINT('',(7.018229166667E-02,1.936848958333E-02));+#8013 = VECTOR('',#8014,1.);+#8014 = DIRECTION('',(0.256434699025,0.966561557862));+#8015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8016 = PCURVE('',#7780,#8017);+#8017 = DEFINITIONAL_REPRESENTATION('',(#8018),#8022);+#8018 = LINE('',#8019,#8020);+#8019 = CARTESIAN_POINT('',(0.,-0.1));+#8020 = VECTOR('',#8021,1.);+#8021 = DIRECTION('',(1.,0.));+#8022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8023 = ORIENTED_EDGE('',*,*,#8024,.T.);+#8024 = EDGE_CURVE('',#8002,#8025,#8027,.T.);+#8025 = VERTEX_POINT('',#8026);+#8026 = CARTESIAN_POINT('',(0.625659179688,8.932291666667E-02,1.5000001)+ );+#8027 = SURFACE_CURVE('',#8028,(#8032,#8039),.PCURVE_S1.);+#8028 = LINE('',#8029,#8030);+#8029 = CARTESIAN_POINT('',(0.601847330729,8.932291666667E-02,1.5000001)+ );+#8030 = VECTOR('',#8031,1.);+#8031 = DIRECTION('',(1.,0.,0.));+#8032 = PCURVE('',#7940,#8033);+#8033 = DEFINITIONAL_REPRESENTATION('',(#8034),#8038);+#8034 = LINE('',#8035,#8036);+#8035 = CARTESIAN_POINT('',(0.110172526042,0.170100911458));+#8036 = VECTOR('',#8037,1.);+#8037 = DIRECTION('',(1.,0.));+#8038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8039 = PCURVE('',#7807,#8040);+#8040 = DEFINITIONAL_REPRESENTATION('',(#8041),#8045);+#8041 = LINE('',#8042,#8043);+#8042 = CARTESIAN_POINT('',(0.,-0.1));+#8043 = VECTOR('',#8044,1.);+#8044 = DIRECTION('',(1.,0.));+#8045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8046 = ORIENTED_EDGE('',*,*,#8047,.T.);+#8047 = EDGE_CURVE('',#8025,#8048,#8050,.T.);+#8048 = VERTEX_POINT('',#8049);+#8049 = CARTESIAN_POINT('',(0.575870768229,-8.077799479167E-02,1.5000001+ ));+#8050 = SURFACE_CURVE('',#8051,(#8055,#8062),.PCURVE_S1.);+#8051 = LINE('',#8052,#8053);+#8052 = CARTESIAN_POINT('',(0.625659179688,8.932291666667E-02,1.5000001)+ );+#8053 = VECTOR('',#8054,1.);+#8054 = DIRECTION('',(-0.280913194718,-0.959733180125,0.));+#8055 = PCURVE('',#7940,#8056);+#8056 = DEFINITIONAL_REPRESENTATION('',(#8057),#8061);+#8057 = LINE('',#8058,#8059);+#8058 = CARTESIAN_POINT('',(0.133984375,0.170100911458));+#8059 = VECTOR('',#8060,1.);+#8060 = DIRECTION('',(-0.280913194718,-0.959733180125));+#8061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8062 = PCURVE('',#7834,#8063);+#8063 = DEFINITIONAL_REPRESENTATION('',(#8064),#8068);+#8064 = LINE('',#8065,#8066);+#8065 = CARTESIAN_POINT('',(-0.,-0.1));+#8066 = VECTOR('',#8067,1.);+#8067 = DIRECTION('',(1.,0.));+#8068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8069 = ORIENTED_EDGE('',*,*,#8070,.T.);+#8070 = EDGE_CURVE('',#8048,#7902,#8071,.T.);+#8071 = SURFACE_CURVE('',#8072,(#8076,#8083),.PCURVE_S1.);+#8072 = LINE('',#8073,#8074);+#8073 = CARTESIAN_POINT('',(0.575870768229,-8.077799479167E-02,1.5000001+ ));+#8074 = VECTOR('',#8075,1.);+#8075 = DIRECTION('',(-1.,0.,0.));+#8076 = PCURVE('',#7940,#8077);+#8077 = DEFINITIONAL_REPRESENTATION('',(#8078),#8082);+#8078 = LINE('',#8079,#8080);+#8079 = CARTESIAN_POINT('',(8.419596354167E-02,0.));+#8080 = VECTOR('',#8081,1.);+#8081 = DIRECTION('',(-1.,0.));+#8082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8083 = PCURVE('',#7861,#8084);+#8084 = DEFINITIONAL_REPRESENTATION('',(#8085),#8089);+#8085 = LINE('',#8086,#8087);+#8086 = CARTESIAN_POINT('',(0.,-0.1));+#8087 = VECTOR('',#8088,1.);+#8088 = DIRECTION('',(1.,0.));+#8089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8090 = ORIENTED_EDGE('',*,*,#7924,.T.);+#8091 = ORIENTED_EDGE('',*,*,#8092,.T.);+#8092 = EDGE_CURVE('',#7925,#7977,#8093,.T.);+#8093 = SURFACE_CURVE('',#8094,(#8098,#8105),.PCURVE_S1.);+#8094 = LINE('',#8095,#8096);+#8095 = CARTESIAN_POINT('',(0.498168945312,8.932291666667E-02,1.5000001)+ );+#8096 = VECTOR('',#8097,1.);+#8097 = DIRECTION('',(1.,0.,0.));+#8098 = PCURVE('',#7940,#8099);+#8099 = DEFINITIONAL_REPRESENTATION('',(#8100),#8104);+#8100 = LINE('',#8101,#8102);+#8101 = CARTESIAN_POINT('',(6.494140625E-03,0.170100911458));+#8102 = VECTOR('',#8103,1.);+#8103 = DIRECTION('',(1.,0.));+#8104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8105 = PCURVE('',#7726,#8106);+#8106 = DEFINITIONAL_REPRESENTATION('',(#8107),#8111);+#8107 = LINE('',#8108,#8109);+#8108 = CARTESIAN_POINT('',(0.,-0.1));+#8109 = VECTOR('',#8110,1.);+#8110 = DIRECTION('',(1.,0.));+#8111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8112 = ADVANCED_FACE('',(#8113),#7861,.T.);+#8113 = FACE_BOUND('',#8114,.T.);+#8114 = EDGE_LOOP('',(#8115,#8116,#8137,#8138));+#8115 = ORIENTED_EDGE('',*,*,#7845,.F.);+#8116 = ORIENTED_EDGE('',*,*,#8117,.T.);+#8117 = EDGE_CURVE('',#7819,#8048,#8118,.T.);+#8118 = SURFACE_CURVE('',#8119,(#8123,#8130),.PCURVE_S1.);+#8119 = LINE('',#8120,#8121);+#8120 = CARTESIAN_POINT('',(0.575870768229,-8.077799479167E-02,1.6000001+ ));+#8121 = VECTOR('',#8122,1.);+#8122 = DIRECTION('',(-0.,-0.,-1.));+#8123 = PCURVE('',#7861,#8124);+#8124 = DEFINITIONAL_REPRESENTATION('',(#8125),#8129);+#8125 = LINE('',#8126,#8127);+#8126 = CARTESIAN_POINT('',(0.,0.));+#8127 = VECTOR('',#8128,1.);+#8128 = DIRECTION('',(0.,-1.));+#8129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8130 = PCURVE('',#7834,#8131);+#8131 = DEFINITIONAL_REPRESENTATION('',(#8132),#8136);+#8132 = LINE('',#8133,#8134);+#8133 = CARTESIAN_POINT('',(0.177237710419,0.));+#8134 = VECTOR('',#8135,1.);+#8135 = DIRECTION('',(0.,-1.));+#8136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8137 = ORIENTED_EDGE('',*,*,#8070,.T.);+#8138 = ORIENTED_EDGE('',*,*,#7901,.F.);+#8139 = ADVANCED_FACE('',(#8140),#7834,.T.);+#8140 = FACE_BOUND('',#8141,.T.);+#8141 = EDGE_LOOP('',(#8142,#8143,#8164,#8165));+#8142 = ORIENTED_EDGE('',*,*,#7818,.F.);+#8143 = ORIENTED_EDGE('',*,*,#8144,.T.);+#8144 = EDGE_CURVE('',#7792,#8025,#8145,.T.);+#8145 = SURFACE_CURVE('',#8146,(#8150,#8157),.PCURVE_S1.);+#8146 = LINE('',#8147,#8148);+#8147 = CARTESIAN_POINT('',(0.625659179688,8.932291666667E-02,1.6000001)+ );+#8148 = VECTOR('',#8149,1.);+#8149 = DIRECTION('',(-0.,-0.,-1.));+#8150 = PCURVE('',#7834,#8151);+#8151 = DEFINITIONAL_REPRESENTATION('',(#8152),#8156);+#8152 = LINE('',#8153,#8154);+#8153 = CARTESIAN_POINT('',(0.,0.));+#8154 = VECTOR('',#8155,1.);+#8155 = DIRECTION('',(0.,-1.));+#8156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8157 = PCURVE('',#7807,#8158);+#8158 = DEFINITIONAL_REPRESENTATION('',(#8159),#8163);+#8159 = LINE('',#8160,#8161);+#8160 = CARTESIAN_POINT('',(2.381184895833E-02,0.));+#8161 = VECTOR('',#8162,1.);+#8162 = DIRECTION('',(0.,-1.));+#8163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8164 = ORIENTED_EDGE('',*,*,#8047,.T.);+#8165 = ORIENTED_EDGE('',*,*,#8117,.F.);+#8166 = ADVANCED_FACE('',(#8167),#7807,.T.);+#8167 = FACE_BOUND('',#8168,.T.);+#8168 = EDGE_LOOP('',(#8169,#8170,#8191,#8192));+#8169 = ORIENTED_EDGE('',*,*,#7791,.F.);+#8170 = ORIENTED_EDGE('',*,*,#8171,.T.);+#8171 = EDGE_CURVE('',#7765,#8002,#8172,.T.);+#8172 = SURFACE_CURVE('',#8173,(#8177,#8184),.PCURVE_S1.);+#8173 = LINE('',#8174,#8175);+#8174 = CARTESIAN_POINT('',(0.601847330729,8.932291666667E-02,1.6000001)+ );+#8175 = VECTOR('',#8176,1.);+#8176 = DIRECTION('',(-0.,-0.,-1.));+#8177 = PCURVE('',#7807,#8178);+#8178 = DEFINITIONAL_REPRESENTATION('',(#8179),#8183);+#8179 = LINE('',#8180,#8181);+#8180 = CARTESIAN_POINT('',(0.,0.));+#8181 = VECTOR('',#8182,1.);+#8182 = DIRECTION('',(0.,-1.));+#8183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8184 = PCURVE('',#7780,#8185);+#8185 = DEFINITIONAL_REPRESENTATION('',(#8186),#8190);+#8186 = LINE('',#8187,#8188);+#8187 = CARTESIAN_POINT('',(0.155947048224,0.));+#8188 = VECTOR('',#8189,1.);+#8189 = DIRECTION('',(0.,-1.));+#8190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8191 = ORIENTED_EDGE('',*,*,#8024,.T.);+#8192 = ORIENTED_EDGE('',*,*,#8144,.F.);+#8193 = ADVANCED_FACE('',(#8194),#7780,.T.);+#8194 = FACE_BOUND('',#8195,.T.);+#8195 = EDGE_LOOP('',(#8196,#8197,#8218,#8219));+#8196 = ORIENTED_EDGE('',*,*,#7764,.F.);+#8197 = ORIENTED_EDGE('',*,*,#8198,.T.);+#8198 = EDGE_CURVE('',#7738,#7979,#8199,.T.);+#8199 = SURFACE_CURVE('',#8200,(#8204,#8211),.PCURVE_S1.);+#8200 = LINE('',#8201,#8202);+#8201 = CARTESIAN_POINT('',(0.561857096354,-6.140950520833E-02,1.6000001+ ));+#8202 = VECTOR('',#8203,1.);+#8203 = DIRECTION('',(-0.,-0.,-1.));+#8204 = PCURVE('',#7780,#8205);+#8205 = DEFINITIONAL_REPRESENTATION('',(#8206),#8210);+#8206 = LINE('',#8207,#8208);+#8207 = CARTESIAN_POINT('',(-6.706868101598E-18,0.));+#8208 = VECTOR('',#8209,1.);+#8209 = DIRECTION('',(0.,-1.));+#8210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8211 = PCURVE('',#7753,#8212);+#8212 = DEFINITIONAL_REPRESENTATION('',(#8213),#8217);+#8213 = LINE('',#8214,#8215);+#8214 = CARTESIAN_POINT('',(0.15591787092,0.));+#8215 = VECTOR('',#8216,1.);+#8216 = DIRECTION('',(0.,-1.));+#8217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8218 = ORIENTED_EDGE('',*,*,#8001,.T.);+#8219 = ORIENTED_EDGE('',*,*,#8171,.F.);+#8220 = ADVANCED_FACE('',(#8221),#7753,.T.);+#8221 = FACE_BOUND('',#8222,.T.);+#8222 = EDGE_LOOP('',(#8223,#8224,#8245,#8246));+#8223 = ORIENTED_EDGE('',*,*,#7737,.F.);+#8224 = ORIENTED_EDGE('',*,*,#8225,.T.);+#8225 = EDGE_CURVE('',#7711,#7977,#8226,.T.);+#8226 = SURFACE_CURVE('',#8227,(#8231,#8238),.PCURVE_S1.);+#8227 = LINE('',#8228,#8229);+#8228 = CARTESIAN_POINT('',(0.521980794271,8.932291666667E-02,1.6000001)+ );+#8229 = VECTOR('',#8230,1.);+#8230 = DIRECTION('',(-0.,-0.,-1.));+#8231 = PCURVE('',#7753,#8232);+#8232 = DEFINITIONAL_REPRESENTATION('',(#8233),#8237);+#8233 = LINE('',#8234,#8235);+#8234 = CARTESIAN_POINT('',(0.,0.));+#8235 = VECTOR('',#8236,1.);+#8236 = DIRECTION('',(0.,-1.));+#8237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8238 = PCURVE('',#7726,#8239);+#8239 = DEFINITIONAL_REPRESENTATION('',(#8240),#8244);+#8240 = LINE('',#8241,#8242);+#8241 = CARTESIAN_POINT('',(2.381184895833E-02,0.));+#8242 = VECTOR('',#8243,1.);+#8243 = DIRECTION('',(0.,-1.));+#8244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8245 = ORIENTED_EDGE('',*,*,#7976,.T.);+#8246 = ORIENTED_EDGE('',*,*,#8198,.F.);+#8247 = ADVANCED_FACE('',(#8248),#7726,.T.);+#8248 = FACE_BOUND('',#8249,.T.);+#8249 = EDGE_LOOP('',(#8250,#8251,#8252,#8253));+#8250 = ORIENTED_EDGE('',*,*,#7708,.F.);+#8251 = ORIENTED_EDGE('',*,*,#7952,.T.);+#8252 = ORIENTED_EDGE('',*,*,#8092,.T.);+#8253 = ORIENTED_EDGE('',*,*,#8225,.F.);+#8254 = ADVANCED_FACE('',(#8255),#7690,.T.);+#8255 = FACE_BOUND('',#8256,.T.);+#8256 = EDGE_LOOP('',(#8257,#8258,#8281,#8309));+#8257 = ORIENTED_EDGE('',*,*,#7672,.T.);+#8258 = ORIENTED_EDGE('',*,*,#8259,.T.);+#8259 = EDGE_CURVE('',#7628,#8260,#8262,.T.);+#8260 = VERTEX_POINT('',#8261);+#8261 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.5000001+ ));+#8262 = SURFACE_CURVE('',#8263,(#8267,#8274),.PCURVE_S1.);+#8263 = LINE('',#8264,#8265);+#8264 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.6000001+ ));+#8265 = VECTOR('',#8266,1.);+#8266 = DIRECTION('',(-0.,-0.,-1.));+#8267 = PCURVE('',#7690,#8268);+#8268 = DEFINITIONAL_REPRESENTATION('',(#8269),#8273);+#8269 = LINE('',#8270,#8271);+#8270 = CARTESIAN_POINT('',(0.,0.));+#8271 = VECTOR('',#8272,1.);+#8272 = DIRECTION('',(0.,-1.));+#8273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8274 = PCURVE('',#7653,#8275);+#8275 = DEFINITIONAL_REPRESENTATION('',(#8276),#8280);+#8276 = LINE('',#8277,#8278);+#8277 = CARTESIAN_POINT('',(1.,0.));+#8278 = VECTOR('',#8279,1.);+#8279 = DIRECTION('',(0.,-1.));+#8280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8281 = ORIENTED_EDGE('',*,*,#8282,.T.);+#8282 = EDGE_CURVE('',#8260,#8283,#8285,.T.);+#8283 = VERTEX_POINT('',#8284);+#8284 = CARTESIAN_POINT('',(0.420467122396,-8.077799479167E-02,1.5000001+ ));+#8285 = SURFACE_CURVE('',#8286,(#8290,#8297),.PCURVE_S1.);+#8286 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8287,#8288,#8289),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8287 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.5000001+ ));+#8288 = CARTESIAN_POINT('',(0.450431315104,-8.077799479167E-02,1.5000001+ ));+#8289 = CARTESIAN_POINT('',(0.420467122396,-8.077799479167E-02,1.5000001+ ));+#8290 = PCURVE('',#7690,#8291);+#8291 = DEFINITIONAL_REPRESENTATION('',(#8292),#8296);+#8292 = LINE('',#8293,#8294);+#8293 = CARTESIAN_POINT('',(0.,-0.1));+#8294 = VECTOR('',#8295,1.);+#8295 = DIRECTION('',(1.,0.));+#8296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8297 = PCURVE('',#8298,#8303);+#8298 = PLANE('',#8299);+#8299 = AXIS2_PLACEMENT_3D('',#8300,#8301,#8302);+#8300 = CARTESIAN_POINT('',(0.351196289063,-8.077799479167E-02,1.5000001+ ));+#8301 = DIRECTION('',(0.,0.,1.));+#8302 = DIRECTION('',(1.,0.,0.));+#8303 = DEFINITIONAL_REPRESENTATION('',(#8304),#8308);+#8304 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8305,#8306,#8307),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8305 = CARTESIAN_POINT('',(0.114388020833,1.17919921875E-02));+#8306 = CARTESIAN_POINT('',(9.923502604167E-02,0.));+#8307 = CARTESIAN_POINT('',(6.927083333333E-02,0.));+#8308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8309 = ORIENTED_EDGE('',*,*,#8310,.F.);+#8310 = EDGE_CURVE('',#7320,#8283,#8311,.T.);+#8311 = SURFACE_CURVE('',#8312,(#8316,#8323),.PCURVE_S1.);+#8312 = LINE('',#8313,#8314);+#8313 = CARTESIAN_POINT('',(0.420467122396,-8.077799479167E-02,1.6000001+ ));+#8314 = VECTOR('',#8315,1.);+#8315 = DIRECTION('',(-0.,-0.,-1.));+#8316 = PCURVE('',#7690,#8317);+#8317 = DEFINITIONAL_REPRESENTATION('',(#8318),#8322);+#8318 = LINE('',#8319,#8320);+#8319 = CARTESIAN_POINT('',(1.,0.));+#8320 = VECTOR('',#8321,1.);+#8321 = DIRECTION('',(0.,-1.));+#8322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8323 = PCURVE('',#7337,#8324);+#8324 = DEFINITIONAL_REPRESENTATION('',(#8325),#8329);+#8325 = LINE('',#8326,#8327);+#8326 = CARTESIAN_POINT('',(0.,0.));+#8327 = VECTOR('',#8328,1.);+#8328 = DIRECTION('',(0.,-1.));+#8329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8330 = ADVANCED_FACE('',(#8331,#8562,#8768),#8298,.T.);+#8331 = FACE_BOUND('',#8332,.F.);+#8332 = EDGE_LOOP('',(#8333,#8358,#8381,#8404,#8427,#8450,#8473,#8496,+ #8519,#8540,#8541));+#8333 = ORIENTED_EDGE('',*,*,#8334,.T.);+#8334 = EDGE_CURVE('',#8335,#8337,#8339,.T.);+#8335 = VERTEX_POINT('',#8336);+#8336 = CARTESIAN_POINT('',(0.370109049479,-8.077799479167E-02,1.5000001+ ));+#8337 = VERTEX_POINT('',#8338);+#8338 = CARTESIAN_POINT('',(0.370109049479,8.932291666667E-02,1.5000001)+ );+#8339 = SURFACE_CURVE('',#8340,(#8344,#8351),.PCURVE_S1.);+#8340 = LINE('',#8341,#8342);+#8341 = CARTESIAN_POINT('',(0.370109049479,-8.077799479167E-02,1.5000001+ ));+#8342 = VECTOR('',#8343,1.);+#8343 = DIRECTION('',(0.,1.,0.));+#8344 = PCURVE('',#8298,#8345);+#8345 = DEFINITIONAL_REPRESENTATION('',(#8346),#8350);+#8346 = LINE('',#8347,#8348);+#8347 = CARTESIAN_POINT('',(1.891276041667E-02,0.));+#8348 = VECTOR('',#8349,1.);+#8349 = DIRECTION('',(0.,1.));+#8350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8351 = PCURVE('',#7364,#8352);+#8352 = DEFINITIONAL_REPRESENTATION('',(#8353),#8357);+#8353 = LINE('',#8354,#8355);+#8354 = CARTESIAN_POINT('',(0.,-0.1));+#8355 = VECTOR('',#8356,1.);+#8356 = DIRECTION('',(1.,0.));+#8357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8358 = ORIENTED_EDGE('',*,*,#8359,.T.);+#8359 = EDGE_CURVE('',#8337,#8360,#8362,.T.);+#8360 = VERTEX_POINT('',#8361);+#8361 = CARTESIAN_POINT('',(0.420467122396,8.932291666667E-02,1.5000001)+ );+#8362 = SURFACE_CURVE('',#8363,(#8367,#8374),.PCURVE_S1.);+#8363 = LINE('',#8364,#8365);+#8364 = CARTESIAN_POINT('',(0.370109049479,8.932291666667E-02,1.5000001)+ );+#8365 = VECTOR('',#8366,1.);+#8366 = DIRECTION('',(1.,0.,0.));+#8367 = PCURVE('',#8298,#8368);+#8368 = DEFINITIONAL_REPRESENTATION('',(#8369),#8373);+#8369 = LINE('',#8370,#8371);+#8370 = CARTESIAN_POINT('',(1.891276041667E-02,0.170100911458));+#8371 = VECTOR('',#8372,1.);+#8372 = DIRECTION('',(1.,0.));+#8373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8374 = PCURVE('',#7391,#8375);+#8375 = DEFINITIONAL_REPRESENTATION('',(#8376),#8380);+#8376 = LINE('',#8377,#8378);+#8377 = CARTESIAN_POINT('',(0.,-0.1));+#8378 = VECTOR('',#8379,1.);+#8379 = DIRECTION('',(1.,0.));+#8380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8381 = ORIENTED_EDGE('',*,*,#8382,.T.);+#8382 = EDGE_CURVE('',#8360,#8383,#8385,.T.);+#8383 = VERTEX_POINT('',#8384);+#8384 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.5000001)+ );+#8385 = SURFACE_CURVE('',#8386,(#8390,#8397),.PCURVE_S1.);+#8386 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8387,#8388,#8389),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8387 = CARTESIAN_POINT('',(0.420467122396,8.932291666667E-02,1.5000001)+ );+#8388 = CARTESIAN_POINT('',(0.446557617188,8.932291666667E-02,1.5000001)+ );+#8389 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.5000001)+ );+#8390 = PCURVE('',#8298,#8391);+#8391 = DEFINITIONAL_REPRESENTATION('',(#8392),#8396);+#8392 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8393,#8394,#8395),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8393 = CARTESIAN_POINT('',(6.927083333333E-02,0.170100911458));+#8394 = CARTESIAN_POINT('',(9.5361328125E-02,0.170100911458));+#8395 = CARTESIAN_POINT('',(0.109488932292,0.158821614583));+#8396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8397 = PCURVE('',#7422,#8398);+#8398 = DEFINITIONAL_REPRESENTATION('',(#8399),#8403);+#8399 = LINE('',#8400,#8401);+#8400 = CARTESIAN_POINT('',(0.,-0.1));+#8401 = VECTOR('',#8402,1.);+#8402 = DIRECTION('',(1.,0.));+#8403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8404 = ORIENTED_EDGE('',*,*,#8405,.T.);+#8405 = EDGE_CURVE('',#8383,#8406,#8408,.T.);+#8406 = VERTEX_POINT('',#8407);+#8407 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.5000001));+#8408 = SURFACE_CURVE('',#8409,(#8413,#8420),.PCURVE_S1.);+#8409 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8410,#8411,#8412),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8410 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.5000001)+ );+#8411 = CARTESIAN_POINT('',(0.474812825521,6.676432291667E-02,1.5000001)+ );+#8412 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.5000001));+#8413 = PCURVE('',#8298,#8414);+#8414 = DEFINITIONAL_REPRESENTATION('',(#8415),#8419);+#8415 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8416,#8417,#8418),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8416 = CARTESIAN_POINT('',(0.109488932292,0.158821614583));+#8417 = CARTESIAN_POINT('',(0.123616536458,0.147542317708));+#8418 = CARTESIAN_POINT('',(0.123616536458,0.126920572917));+#8419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8420 = PCURVE('',#7464,#8421);+#8421 = DEFINITIONAL_REPRESENTATION('',(#8422),#8426);+#8422 = LINE('',#8423,#8424);+#8423 = CARTESIAN_POINT('',(0.,-0.1));+#8424 = VECTOR('',#8425,1.);+#8425 = DIRECTION('',(1.,0.));+#8426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8427 = ORIENTED_EDGE('',*,*,#8428,.T.);+#8428 = EDGE_CURVE('',#8406,#8429,#8431,.T.);+#8429 = VERTEX_POINT('',#8430);+#8430 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.5000001));+#8431 = SURFACE_CURVE('',#8432,(#8436,#8443),.PCURVE_S1.);+#8432 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8433,#8434,#8435),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8433 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.5000001));+#8434 = CARTESIAN_POINT('',(0.474812825521,3.053385416667E-02,1.5000001)+ );+#8435 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.5000001));+#8436 = PCURVE('',#8298,#8437);+#8437 = DEFINITIONAL_REPRESENTATION('',(#8438),#8442);+#8438 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8439,#8440,#8441),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8439 = CARTESIAN_POINT('',(0.123616536458,0.126920572917));+#8440 = CARTESIAN_POINT('',(0.123616536458,0.111311848958));+#8441 = CARTESIAN_POINT('',(0.116153971354,0.102311197917));+#8442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8443 = PCURVE('',#7503,#8444);+#8444 = DEFINITIONAL_REPRESENTATION('',(#8445),#8449);+#8445 = LINE('',#8446,#8447);+#8446 = CARTESIAN_POINT('',(0.,-0.1));+#8447 = VECTOR('',#8448,1.);+#8448 = DIRECTION('',(1.,0.));+#8449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8450 = ORIENTED_EDGE('',*,*,#8451,.T.);+#8451 = EDGE_CURVE('',#8429,#8452,#8454,.T.);+#8452 = VERTEX_POINT('',#8453);+#8453 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.5000001));+#8454 = SURFACE_CURVE('',#8455,(#8459,#8466),.PCURVE_S1.);+#8455 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8456,#8457,#8458),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8456 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.5000001));+#8457 = CARTESIAN_POINT('',(0.459887695313,1.253255208333E-02,1.5000001)+ );+#8458 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.5000001));+#8459 = PCURVE('',#8298,#8460);+#8460 = DEFINITIONAL_REPRESENTATION('',(#8461),#8465);+#8461 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8462,#8463,#8464),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8462 = CARTESIAN_POINT('',(0.116153971354,0.102311197917));+#8463 = CARTESIAN_POINT('',(0.10869140625,9.3310546875E-02));+#8464 = CARTESIAN_POINT('',(9.376627604167E-02,9.103190104167E-02));+#8465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8466 = PCURVE('',#7539,#8467);+#8467 = DEFINITIONAL_REPRESENTATION('',(#8468),#8472);+#8468 = LINE('',#8469,#8470);+#8469 = CARTESIAN_POINT('',(0.,-0.1));+#8470 = VECTOR('',#8471,1.);+#8471 = DIRECTION('',(1.,0.));+#8472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8473 = ORIENTED_EDGE('',*,*,#8474,.T.);+#8474 = EDGE_CURVE('',#8452,#8475,#8477,.T.);+#8475 = VERTEX_POINT('',#8476);+#8476 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.5000001+ ));+#8477 = SURFACE_CURVE('',#8478,(#8482,#8489),.PCURVE_S1.);+#8478 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8479,#8480,#8481),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8479 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.5000001));+#8480 = CARTESIAN_POINT('',(0.461710611979,7.747395833333E-03,1.5000001)+ );+#8481 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.5000001+ ));+#8482 = PCURVE('',#8298,#8483);+#8483 = DEFINITIONAL_REPRESENTATION('',(#8484),#8488);+#8484 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8485,#8486,#8487),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8485 = CARTESIAN_POINT('',(9.376627604167E-02,9.103190104167E-02));+#8486 = CARTESIAN_POINT('',(0.110514322917,8.8525390625E-02));+#8487 = CARTESIAN_POINT('',(0.120027669271,7.67333984375E-02));+#8488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8489 = PCURVE('',#7575,#8490);+#8490 = DEFINITIONAL_REPRESENTATION('',(#8491),#8495);+#8491 = LINE('',#8492,#8493);+#8492 = CARTESIAN_POINT('',(0.,-0.1));+#8493 = VECTOR('',#8494,1.);+#8494 = DIRECTION('',(1.,0.));+#8495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8496 = ORIENTED_EDGE('',*,*,#8497,.T.);+#8497 = EDGE_CURVE('',#8475,#8498,#8500,.T.);+#8498 = VERTEX_POINT('',#8499);+#8499 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.5000001+ ));+#8500 = SURFACE_CURVE('',#8501,(#8505,#8512),.PCURVE_S1.);+#8501 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8502,#8503,#8504),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8502 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.5000001+ ));+#8503 = CARTESIAN_POINT('',(0.480737304688,-1.583658854167E-02,1.5000001+ ));+#8504 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.5000001+ ));+#8505 = PCURVE('',#8298,#8506);+#8506 = DEFINITIONAL_REPRESENTATION('',(#8507),#8511);+#8507 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8508,#8509,#8510),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8508 = CARTESIAN_POINT('',(0.120027669271,7.67333984375E-02));+#8509 = CARTESIAN_POINT('',(0.129541015625,6.494140625E-02));+#8510 = CARTESIAN_POINT('',(0.129541015625,4.671223958333E-02));+#8511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8512 = PCURVE('',#7611,#8513);+#8513 = DEFINITIONAL_REPRESENTATION('',(#8514),#8518);+#8514 = LINE('',#8515,#8516);+#8515 = CARTESIAN_POINT('',(0.,-0.1));+#8516 = VECTOR('',#8517,1.);+#8517 = DIRECTION('',(1.,0.));+#8518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8519 = ORIENTED_EDGE('',*,*,#8520,.T.);+#8520 = EDGE_CURVE('',#8498,#8260,#8521,.T.);+#8521 = SURFACE_CURVE('',#8522,(#8526,#8533),.PCURVE_S1.);+#8522 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8523,#8524,#8525),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8523 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.5000001+ ));+#8524 = CARTESIAN_POINT('',(0.480737304688,-5.719401041667E-02,1.5000001+ ));+#8525 = CARTESIAN_POINT('',(0.465584309896,-6.898600260417E-02,1.5000001+ ));+#8526 = PCURVE('',#8298,#8527);+#8527 = DEFINITIONAL_REPRESENTATION('',(#8528),#8532);+#8528 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8529,#8530,#8531),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8529 = CARTESIAN_POINT('',(0.129541015625,4.671223958333E-02));+#8530 = CARTESIAN_POINT('',(0.129541015625,2.3583984375E-02));+#8531 = CARTESIAN_POINT('',(0.114388020833,1.17919921875E-02));+#8532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8533 = PCURVE('',#7653,#8534);+#8534 = DEFINITIONAL_REPRESENTATION('',(#8535),#8539);+#8535 = LINE('',#8536,#8537);+#8536 = CARTESIAN_POINT('',(0.,-0.1));+#8537 = VECTOR('',#8538,1.);+#8538 = DIRECTION('',(1.,0.));+#8539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8540 = ORIENTED_EDGE('',*,*,#8282,.T.);+#8541 = ORIENTED_EDGE('',*,*,#8542,.T.);+#8542 = EDGE_CURVE('',#8283,#8335,#8543,.T.);+#8543 = SURFACE_CURVE('',#8544,(#8548,#8555),.PCURVE_S1.);+#8544 = LINE('',#8545,#8546);+#8545 = CARTESIAN_POINT('',(0.420467122396,-8.077799479167E-02,1.5000001+ ));+#8546 = VECTOR('',#8547,1.);+#8547 = DIRECTION('',(-1.,0.,0.));+#8548 = PCURVE('',#8298,#8549);+#8549 = DEFINITIONAL_REPRESENTATION('',(#8550),#8554);+#8550 = LINE('',#8551,#8552);+#8551 = CARTESIAN_POINT('',(6.927083333333E-02,0.));+#8552 = VECTOR('',#8553,1.);+#8553 = DIRECTION('',(-1.,0.));+#8554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8555 = PCURVE('',#7337,#8556);+#8556 = DEFINITIONAL_REPRESENTATION('',(#8557),#8561);+#8557 = LINE('',#8558,#8559);+#8558 = CARTESIAN_POINT('',(0.,-0.1));+#8559 = VECTOR('',#8560,1.);+#8560 = DIRECTION('',(1.,0.));+#8561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8562 = FACE_BOUND('',#8563,.F.);+#8563 = EDGE_LOOP('',(#8564,#8594,#8622,#8650,#8680,#8710,#8740));+#8564 = ORIENTED_EDGE('',*,*,#8565,.T.);+#8565 = EDGE_CURVE('',#8566,#8568,#8570,.T.);+#8566 = VERTEX_POINT('',#8567);+#8567 = CARTESIAN_POINT('',(0.420467122396,4.557291666667E-04,1.5000001)+ );+#8568 = VERTEX_POINT('',#8569);+#8569 = CARTESIAN_POINT('',(0.393237304688,4.557291666667E-04,1.5000001)+ );+#8570 = SURFACE_CURVE('',#8571,(#8575,#8582),.PCURVE_S1.);+#8571 = LINE('',#8572,#8573);+#8572 = CARTESIAN_POINT('',(0.420467122396,4.557291666667E-04,1.5000001)+ );+#8573 = VECTOR('',#8574,1.);+#8574 = DIRECTION('',(-1.,0.,0.));+#8575 = PCURVE('',#8298,#8576);+#8576 = DEFINITIONAL_REPRESENTATION('',(#8577),#8581);+#8577 = LINE('',#8578,#8579);+#8578 = CARTESIAN_POINT('',(6.927083333333E-02,8.123372395833E-02));+#8579 = VECTOR('',#8580,1.);+#8580 = DIRECTION('',(-1.,0.));+#8581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8582 = PCURVE('',#8583,#8588);+#8583 = PLANE('',#8584);+#8584 = AXIS2_PLACEMENT_3D('',#8585,#8586,#8587);+#8585 = CARTESIAN_POINT('',(0.420467122396,4.557291666667E-04,1.6000001)+ );+#8586 = DIRECTION('',(0.,1.,0.));+#8587 = DIRECTION('',(-1.,0.,0.));+#8588 = DEFINITIONAL_REPRESENTATION('',(#8589),#8593);+#8589 = LINE('',#8590,#8591);+#8590 = CARTESIAN_POINT('',(0.,-0.1));+#8591 = VECTOR('',#8592,1.);+#8592 = DIRECTION('',(1.,0.));+#8593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8594 = ORIENTED_EDGE('',*,*,#8595,.T.);+#8595 = EDGE_CURVE('',#8568,#8596,#8598,.T.);+#8596 = VERTEX_POINT('',#8597);+#8597 = CARTESIAN_POINT('',(0.393237304688,-6.1865234375E-02,1.5000001)+ );+#8598 = SURFACE_CURVE('',#8599,(#8603,#8610),.PCURVE_S1.);+#8599 = LINE('',#8600,#8601);+#8600 = CARTESIAN_POINT('',(0.393237304688,4.557291666667E-04,1.5000001)+ );+#8601 = VECTOR('',#8602,1.);+#8602 = DIRECTION('',(0.,-1.,0.));+#8603 = PCURVE('',#8298,#8604);+#8604 = DEFINITIONAL_REPRESENTATION('',(#8605),#8609);+#8605 = LINE('',#8606,#8607);+#8606 = CARTESIAN_POINT('',(4.2041015625E-02,8.123372395833E-02));+#8607 = VECTOR('',#8608,1.);+#8608 = DIRECTION('',(0.,-1.));+#8609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8610 = PCURVE('',#8611,#8616);+#8611 = PLANE('',#8612);+#8612 = AXIS2_PLACEMENT_3D('',#8613,#8614,#8615);+#8613 = CARTESIAN_POINT('',(0.393237304688,4.557291666667E-04,1.6000001)+ );+#8614 = DIRECTION('',(-1.,0.,0.));+#8615 = DIRECTION('',(0.,-1.,0.));+#8616 = DEFINITIONAL_REPRESENTATION('',(#8617),#8621);+#8617 = LINE('',#8618,#8619);+#8618 = CARTESIAN_POINT('',(0.,-0.1));+#8619 = VECTOR('',#8620,1.);+#8620 = DIRECTION('',(1.,0.));+#8621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8622 = ORIENTED_EDGE('',*,*,#8623,.T.);+#8623 = EDGE_CURVE('',#8596,#8624,#8626,.T.);+#8624 = VERTEX_POINT('',#8625);+#8625 = CARTESIAN_POINT('',(0.420467122396,-6.1865234375E-02,1.5000001)+ );+#8626 = SURFACE_CURVE('',#8627,(#8631,#8638),.PCURVE_S1.);+#8627 = LINE('',#8628,#8629);+#8628 = CARTESIAN_POINT('',(0.393237304688,-6.1865234375E-02,1.5000001)+ );+#8629 = VECTOR('',#8630,1.);+#8630 = DIRECTION('',(1.,0.,0.));+#8631 = PCURVE('',#8298,#8632);+#8632 = DEFINITIONAL_REPRESENTATION('',(#8633),#8637);+#8633 = LINE('',#8634,#8635);+#8634 = CARTESIAN_POINT('',(4.2041015625E-02,1.891276041667E-02));+#8635 = VECTOR('',#8636,1.);+#8636 = DIRECTION('',(1.,0.));+#8637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8638 = PCURVE('',#8639,#8644);+#8639 = PLANE('',#8640);+#8640 = AXIS2_PLACEMENT_3D('',#8641,#8642,#8643);+#8641 = CARTESIAN_POINT('',(0.393237304688,-6.1865234375E-02,1.6000001)+ );+#8642 = DIRECTION('',(0.,-1.,0.));+#8643 = DIRECTION('',(1.,0.,0.));+#8644 = DEFINITIONAL_REPRESENTATION('',(#8645),#8649);+#8645 = LINE('',#8646,#8647);+#8646 = CARTESIAN_POINT('',(0.,-0.1));+#8647 = VECTOR('',#8648,1.);+#8648 = DIRECTION('',(1.,0.));+#8649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8650 = ORIENTED_EDGE('',*,*,#8651,.T.);+#8651 = EDGE_CURVE('',#8624,#8652,#8654,.T.);+#8652 = VERTEX_POINT('',#8653);+#8653 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.5000001)+ );+#8654 = SURFACE_CURVE('',#8655,(#8659,#8666),.PCURVE_S1.);+#8655 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8656,#8657,#8658),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8656 = CARTESIAN_POINT('',(0.420467122396,-6.1865234375E-02,1.5000001)+ );+#8657 = CARTESIAN_POINT('',(0.440519205729,-6.1865234375E-02,1.5000001)+ );+#8658 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.5000001)+ );+#8659 = PCURVE('',#8298,#8660);+#8660 = DEFINITIONAL_REPRESENTATION('',(#8661),#8665);+#8661 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8662,#8663,#8664),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8662 = CARTESIAN_POINT('',(6.927083333333E-02,1.891276041667E-02));+#8663 = CARTESIAN_POINT('',(8.932291666667E-02,1.891276041667E-02));+#8664 = CARTESIAN_POINT('',(9.786783854167E-02,2.591959635417E-02));+#8665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8666 = PCURVE('',#8667,#8674);+#8667 = SURFACE_OF_LINEAR_EXTRUSION('',#8668,#8672);+#8668 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8669,#8670,#8671),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8669 = CARTESIAN_POINT('',(0.420467122396,-6.1865234375E-02,1.6000001)+ );+#8670 = CARTESIAN_POINT('',(0.440519205729,-6.1865234375E-02,1.6000001)+ );+#8671 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.6000001)+ );+#8672 = VECTOR('',#8673,1.);+#8673 = DIRECTION('',(0.,0.,1.));+#8674 = DEFINITIONAL_REPRESENTATION('',(#8675),#8679);+#8675 = LINE('',#8676,#8677);+#8676 = CARTESIAN_POINT('',(0.,-0.1));+#8677 = VECTOR('',#8678,1.);+#8678 = DIRECTION('',(1.,0.));+#8679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8680 = ORIENTED_EDGE('',*,*,#8681,.T.);+#8681 = EDGE_CURVE('',#8652,#8682,#8684,.T.);+#8682 = VERTEX_POINT('',#8683);+#8683 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.5000001)+ );+#8684 = SURFACE_CURVE('',#8685,(#8689,#8696),.PCURVE_S1.);+#8685 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8686,#8687,#8688),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8686 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.5000001)+ );+#8687 = CARTESIAN_POINT('',(0.457609049479,-4.78515625E-02,1.5000001));+#8688 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.5000001)+ );+#8689 = PCURVE('',#8298,#8690);+#8690 = DEFINITIONAL_REPRESENTATION('',(#8691),#8695);+#8691 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8692,#8693,#8694),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8692 = CARTESIAN_POINT('',(9.786783854167E-02,2.591959635417E-02));+#8693 = CARTESIAN_POINT('',(0.106412760417,3.292643229167E-02));+#8694 = CARTESIAN_POINT('',(0.106412760417,4.899088541667E-02));+#8695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8696 = PCURVE('',#8697,#8704);+#8697 = SURFACE_OF_LINEAR_EXTRUSION('',#8698,#8702);+#8698 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8699,#8700,#8701),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8699 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.6000001)+ );+#8700 = CARTESIAN_POINT('',(0.457609049479,-4.78515625E-02,1.6000001));+#8701 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.6000001)+ );+#8702 = VECTOR('',#8703,1.);+#8703 = DIRECTION('',(0.,0.,1.));+#8704 = DEFINITIONAL_REPRESENTATION('',(#8705),#8709);+#8705 = LINE('',#8706,#8707);+#8706 = CARTESIAN_POINT('',(0.,-0.1));+#8707 = VECTOR('',#8708,1.);+#8708 = DIRECTION('',(1.,0.));+#8709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8710 = ORIENTED_EDGE('',*,*,#8711,.T.);+#8711 = EDGE_CURVE('',#8682,#8712,#8714,.T.);+#8712 = VERTEX_POINT('',#8713);+#8713 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.5000001)+ );+#8714 = SURFACE_CURVE('',#8715,(#8719,#8726),.PCURVE_S1.);+#8715 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8716,#8717,#8718),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8716 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.5000001)+ );+#8717 = CARTESIAN_POINT('',(0.457609049479,-1.515299479167E-02,1.5000001+ ));+#8718 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.5000001)+ );+#8719 = PCURVE('',#8298,#8720);+#8720 = DEFINITIONAL_REPRESENTATION('',(#8721),#8725);+#8721 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8722,#8723,#8724),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8722 = CARTESIAN_POINT('',(0.106412760417,4.899088541667E-02));+#8723 = CARTESIAN_POINT('',(0.106412760417,6.5625E-02));+#8724 = CARTESIAN_POINT('',(9.7412109375E-02,7.342936197917E-02));+#8725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8726 = PCURVE('',#8727,#8734);+#8727 = SURFACE_OF_LINEAR_EXTRUSION('',#8728,#8732);+#8728 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8729,#8730,#8731),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8729 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.6000001)+ );+#8730 = CARTESIAN_POINT('',(0.457609049479,-1.515299479167E-02,1.6000001+ ));+#8731 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.6000001)+ );+#8732 = VECTOR('',#8733,1.);+#8733 = DIRECTION('',(0.,0.,1.));+#8734 = DEFINITIONAL_REPRESENTATION('',(#8735),#8739);+#8735 = LINE('',#8736,#8737);+#8736 = CARTESIAN_POINT('',(0.,-0.1));+#8737 = VECTOR('',#8738,1.);+#8738 = DIRECTION('',(1.,0.));+#8739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8740 = ORIENTED_EDGE('',*,*,#8741,.T.);+#8741 = EDGE_CURVE('',#8712,#8566,#8742,.T.);+#8742 = SURFACE_CURVE('',#8743,(#8747,#8754),.PCURVE_S1.);+#8743 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8744,#8745,#8746),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8744 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.5000001)+ );+#8745 = CARTESIAN_POINT('',(0.439607747396,4.557291666667E-04,1.5000001)+ );+#8746 = CARTESIAN_POINT('',(0.420467122396,4.557291666667E-04,1.5000001)+ );+#8747 = PCURVE('',#8298,#8748);+#8748 = DEFINITIONAL_REPRESENTATION('',(#8749),#8753);+#8749 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8750,#8751,#8752),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8750 = CARTESIAN_POINT('',(9.7412109375E-02,7.342936197917E-02));+#8751 = CARTESIAN_POINT('',(8.841145833333E-02,8.123372395833E-02));+#8752 = CARTESIAN_POINT('',(6.927083333333E-02,8.123372395833E-02));+#8753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8754 = PCURVE('',#8755,#8762);+#8755 = SURFACE_OF_LINEAR_EXTRUSION('',#8756,#8760);+#8756 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8757,#8758,#8759),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8757 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.6000001)+ );+#8758 = CARTESIAN_POINT('',(0.439607747396,4.557291666667E-04,1.6000001)+ );+#8759 = CARTESIAN_POINT('',(0.420467122396,4.557291666667E-04,1.6000001)+ );+#8760 = VECTOR('',#8761,1.);+#8761 = DIRECTION('',(0.,0.,1.));+#8762 = DEFINITIONAL_REPRESENTATION('',(#8763),#8767);+#8763 = LINE('',#8764,#8765);+#8764 = CARTESIAN_POINT('',(0.,-0.1));+#8765 = VECTOR('',#8766,1.);+#8766 = DIRECTION('',(1.,0.));+#8767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8768 = FACE_BOUND('',#8769,.F.);+#8769 = EDGE_LOOP('',(#8770,#8800,#8828,#8856,#8886,#8916,#8946));+#8770 = ORIENTED_EDGE('',*,*,#8771,.T.);+#8771 = EDGE_CURVE('',#8772,#8774,#8776,.T.);+#8772 = VERTEX_POINT('',#8773);+#8773 = CARTESIAN_POINT('',(0.420011393229,7.041015625E-02,1.5000001));+#8774 = VERTEX_POINT('',#8775);+#8775 = CARTESIAN_POINT('',(0.393237304688,7.041015625E-02,1.5000001));+#8776 = SURFACE_CURVE('',#8777,(#8781,#8788),.PCURVE_S1.);+#8777 = LINE('',#8778,#8779);+#8778 = CARTESIAN_POINT('',(0.420011393229,7.041015625E-02,1.5000001));+#8779 = VECTOR('',#8780,1.);+#8780 = DIRECTION('',(-1.,0.,0.));+#8781 = PCURVE('',#8298,#8782);+#8782 = DEFINITIONAL_REPRESENTATION('',(#8783),#8787);+#8783 = LINE('',#8784,#8785);+#8784 = CARTESIAN_POINT('',(6.881510416667E-02,0.151188151042));+#8785 = VECTOR('',#8786,1.);+#8786 = DIRECTION('',(-1.,0.));+#8787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8788 = PCURVE('',#8789,#8794);+#8789 = PLANE('',#8790);+#8790 = AXIS2_PLACEMENT_3D('',#8791,#8792,#8793);+#8791 = CARTESIAN_POINT('',(0.420011393229,7.041015625E-02,1.6000001));+#8792 = DIRECTION('',(0.,1.,0.));+#8793 = DIRECTION('',(-1.,0.,0.));+#8794 = DEFINITIONAL_REPRESENTATION('',(#8795),#8799);+#8795 = LINE('',#8796,#8797);+#8796 = CARTESIAN_POINT('',(0.,-0.1));+#8797 = VECTOR('',#8798,1.);+#8798 = DIRECTION('',(1.,0.));+#8799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8800 = ORIENTED_EDGE('',*,*,#8801,.T.);+#8801 = EDGE_CURVE('',#8774,#8802,#8804,.T.);+#8802 = VERTEX_POINT('',#8803);+#8803 = CARTESIAN_POINT('',(0.393237304688,1.9140625E-02,1.5000001));+#8804 = SURFACE_CURVE('',#8805,(#8809,#8816),.PCURVE_S1.);+#8805 = LINE('',#8806,#8807);+#8806 = CARTESIAN_POINT('',(0.393237304688,7.041015625E-02,1.5000001));+#8807 = VECTOR('',#8808,1.);+#8808 = DIRECTION('',(0.,-1.,0.));+#8809 = PCURVE('',#8298,#8810);+#8810 = DEFINITIONAL_REPRESENTATION('',(#8811),#8815);+#8811 = LINE('',#8812,#8813);+#8812 = CARTESIAN_POINT('',(4.2041015625E-02,0.151188151042));+#8813 = VECTOR('',#8814,1.);+#8814 = DIRECTION('',(0.,-1.));+#8815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8816 = PCURVE('',#8817,#8822);+#8817 = PLANE('',#8818);+#8818 = AXIS2_PLACEMENT_3D('',#8819,#8820,#8821);+#8819 = CARTESIAN_POINT('',(0.393237304688,7.041015625E-02,1.6000001));+#8820 = DIRECTION('',(-1.,0.,0.));+#8821 = DIRECTION('',(0.,-1.,0.));+#8822 = DEFINITIONAL_REPRESENTATION('',(#8823),#8827);+#8823 = LINE('',#8824,#8825);+#8824 = CARTESIAN_POINT('',(0.,-0.1));+#8825 = VECTOR('',#8826,1.);+#8826 = DIRECTION('',(1.,0.));+#8827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8828 = ORIENTED_EDGE('',*,*,#8829,.T.);+#8829 = EDGE_CURVE('',#8802,#8830,#8832,.T.);+#8830 = VERTEX_POINT('',#8831);+#8831 = CARTESIAN_POINT('',(0.420011393229,1.9140625E-02,1.5000001));+#8832 = SURFACE_CURVE('',#8833,(#8837,#8844),.PCURVE_S1.);+#8833 = LINE('',#8834,#8835);+#8834 = CARTESIAN_POINT('',(0.393237304688,1.9140625E-02,1.5000001));+#8835 = VECTOR('',#8836,1.);+#8836 = DIRECTION('',(1.,0.,0.));+#8837 = PCURVE('',#8298,#8838);+#8838 = DEFINITIONAL_REPRESENTATION('',(#8839),#8843);+#8839 = LINE('',#8840,#8841);+#8840 = CARTESIAN_POINT('',(4.2041015625E-02,9.991861979167E-02));+#8841 = VECTOR('',#8842,1.);+#8842 = DIRECTION('',(1.,0.));+#8843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8844 = PCURVE('',#8845,#8850);+#8845 = PLANE('',#8846);+#8846 = AXIS2_PLACEMENT_3D('',#8847,#8848,#8849);+#8847 = CARTESIAN_POINT('',(0.393237304688,1.9140625E-02,1.6000001));+#8848 = DIRECTION('',(0.,-1.,0.));+#8849 = DIRECTION('',(1.,0.,0.));+#8850 = DEFINITIONAL_REPRESENTATION('',(#8851),#8855);+#8851 = LINE('',#8852,#8853);+#8852 = CARTESIAN_POINT('',(0.,-0.1));+#8853 = VECTOR('',#8854,1.);+#8854 = DIRECTION('',(1.,0.));+#8855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8856 = ORIENTED_EDGE('',*,*,#8857,.T.);+#8857 = EDGE_CURVE('',#8830,#8858,#8860,.T.);+#8858 = VERTEX_POINT('',#8859);+#8859 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.5000001)+ );+#8860 = SURFACE_CURVE('',#8861,(#8865,#8872),.PCURVE_S1.);+#8861 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8862,#8863,#8864),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8862 = CARTESIAN_POINT('',(0.420011393229,1.9140625E-02,1.5000001));+#8863 = CARTESIAN_POINT('',(0.436645507813,1.9140625E-02,1.5000001));+#8864 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.5000001)+ );+#8865 = PCURVE('',#8298,#8866);+#8866 = DEFINITIONAL_REPRESENTATION('',(#8867),#8871);+#8867 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8868,#8869,#8870),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8868 = CARTESIAN_POINT('',(6.881510416667E-02,9.991861979167E-02));+#8869 = CARTESIAN_POINT('',(8.544921875E-02,9.991861979167E-02));+#8870 = CARTESIAN_POINT('',(9.291178385417E-02,0.106298828125));+#8871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8872 = PCURVE('',#8873,#8880);+#8873 = SURFACE_OF_LINEAR_EXTRUSION('',#8874,#8878);+#8874 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8875,#8876,#8877),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8875 = CARTESIAN_POINT('',(0.420011393229,1.9140625E-02,1.6000001));+#8876 = CARTESIAN_POINT('',(0.436645507813,1.9140625E-02,1.6000001));+#8877 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.6000001)+ );+#8878 = VECTOR('',#8879,1.);+#8879 = DIRECTION('',(0.,0.,1.));+#8880 = DEFINITIONAL_REPRESENTATION('',(#8881),#8885);+#8881 = LINE('',#8882,#8883);+#8882 = CARTESIAN_POINT('',(0.,-0.1));+#8883 = VECTOR('',#8884,1.);+#8884 = DIRECTION('',(1.,0.));+#8885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8886 = ORIENTED_EDGE('',*,*,#8887,.T.);+#8887 = EDGE_CURVE('',#8858,#8888,#8890,.T.);+#8888 = VERTEX_POINT('',#8889);+#8889 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.5000001));+#8890 = SURFACE_CURVE('',#8891,(#8895,#8902),.PCURVE_S1.);+#8891 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8892,#8893,#8894),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8892 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.5000001)+ );+#8893 = CARTESIAN_POINT('',(0.451570638021,3.190104166667E-02,1.5000001)+ );+#8894 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.5000001));+#8895 = PCURVE('',#8298,#8896);+#8896 = DEFINITIONAL_REPRESENTATION('',(#8897),#8901);+#8897 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8898,#8899,#8900),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8898 = CARTESIAN_POINT('',(9.291178385417E-02,0.106298828125));+#8899 = CARTESIAN_POINT('',(0.100374348958,0.112679036458));+#8900 = CARTESIAN_POINT('',(0.100374348958,0.126920572917));+#8901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8902 = PCURVE('',#8903,#8910);+#8903 = SURFACE_OF_LINEAR_EXTRUSION('',#8904,#8908);+#8904 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8905,#8906,#8907),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8905 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.6000001)+ );+#8906 = CARTESIAN_POINT('',(0.451570638021,3.190104166667E-02,1.6000001)+ );+#8907 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.6000001));+#8908 = VECTOR('',#8909,1.);+#8909 = DIRECTION('',(0.,0.,1.));+#8910 = DEFINITIONAL_REPRESENTATION('',(#8911),#8915);+#8911 = LINE('',#8912,#8913);+#8912 = CARTESIAN_POINT('',(0.,-0.1));+#8913 = VECTOR('',#8914,1.);+#8914 = DIRECTION('',(1.,0.));+#8915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8916 = ORIENTED_EDGE('',*,*,#8917,.T.);+#8917 = EDGE_CURVE('',#8888,#8918,#8920,.T.);+#8918 = VERTEX_POINT('',#8919);+#8919 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.5000001)+ );+#8920 = SURFACE_CURVE('',#8921,(#8925,#8932),.PCURVE_S1.);+#8921 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8922,#8923,#8924),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8922 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.5000001));+#8923 = CARTESIAN_POINT('',(0.451570638021,5.901692708333E-02,1.5000001)+ );+#8924 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.5000001)+ );+#8925 = PCURVE('',#8298,#8926);+#8926 = DEFINITIONAL_REPRESENTATION('',(#8927),#8931);+#8927 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8928,#8929,#8930),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8928 = CARTESIAN_POINT('',(0.100374348958,0.126920572917));+#8929 = CARTESIAN_POINT('',(0.100374348958,0.139794921875));+#8930 = CARTESIAN_POINT('',(9.302571614583E-02,0.145491536458));+#8931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8932 = PCURVE('',#8933,#8940);+#8933 = SURFACE_OF_LINEAR_EXTRUSION('',#8934,#8938);+#8934 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8935,#8936,#8937),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8935 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.6000001));+#8936 = CARTESIAN_POINT('',(0.451570638021,5.901692708333E-02,1.6000001)+ );+#8937 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.6000001)+ );+#8938 = VECTOR('',#8939,1.);+#8939 = DIRECTION('',(0.,0.,1.));+#8940 = DEFINITIONAL_REPRESENTATION('',(#8941),#8945);+#8941 = LINE('',#8942,#8943);+#8942 = CARTESIAN_POINT('',(0.,-0.1));+#8943 = VECTOR('',#8944,1.);+#8944 = DIRECTION('',(1.,0.));+#8945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8946 = ORIENTED_EDGE('',*,*,#8947,.T.);+#8947 = EDGE_CURVE('',#8918,#8772,#8948,.T.);+#8948 = SURFACE_CURVE('',#8949,(#8953,#8960),.PCURVE_S1.);+#8949 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8950,#8951,#8952),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8950 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.5000001)+ );+#8951 = CARTESIAN_POINT('',(0.436873372396,7.041015625E-02,1.5000001));+#8952 = CARTESIAN_POINT('',(0.420011393229,7.041015625E-02,1.5000001));+#8953 = PCURVE('',#8298,#8954);+#8954 = DEFINITIONAL_REPRESENTATION('',(#8955),#8959);+#8955 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8956,#8957,#8958),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8956 = CARTESIAN_POINT('',(9.302571614583E-02,0.145491536458));+#8957 = CARTESIAN_POINT('',(8.567708333333E-02,0.151188151042));+#8958 = CARTESIAN_POINT('',(6.881510416667E-02,0.151188151042));+#8959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8960 = PCURVE('',#8961,#8968);+#8961 = SURFACE_OF_LINEAR_EXTRUSION('',#8962,#8966);+#8962 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#8963,#8964,#8965),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8963 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.6000001)+ );+#8964 = CARTESIAN_POINT('',(0.436873372396,7.041015625E-02,1.6000001));+#8965 = CARTESIAN_POINT('',(0.420011393229,7.041015625E-02,1.6000001));+#8966 = VECTOR('',#8967,1.);+#8967 = DIRECTION('',(0.,0.,1.));+#8968 = DEFINITIONAL_REPRESENTATION('',(#8969),#8973);+#8969 = LINE('',#8970,#8971);+#8970 = CARTESIAN_POINT('',(0.,-0.1));+#8971 = VECTOR('',#8972,1.);+#8972 = DIRECTION('',(1.,0.));+#8973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8974 = ADVANCED_FACE('',(#8975),#8961,.T.);+#8975 = FACE_BOUND('',#8976,.T.);+#8976 = EDGE_LOOP('',(#8977,#9013,#9034,#9035));+#8977 = ORIENTED_EDGE('',*,*,#8978,.T.);+#8978 = EDGE_CURVE('',#8979,#8981,#8983,.T.);+#8979 = VERTEX_POINT('',#8980);+#8980 = CARTESIAN_POINT('',(0.420011393229,7.041015625E-02,1.55));+#8981 = VERTEX_POINT('',#8982);+#8982 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.55));+#8983 = SURFACE_CURVE('',#8984,(#8990,#8999),.PCURVE_S1.);+#8984 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8985,#8986,#8987,#8988,#8989),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8985 = CARTESIAN_POINT('',(0.420011393229,7.041015625E-02,1.55));+#8986 = CARTESIAN_POINT('',(0.428440370986,7.041015625E-02,1.55));+#8987 = CARTESIAN_POINT('',(0.435286348288,6.94611736638E-02,1.55));+#8988 = CARTESIAN_POINT('',(0.440547112627,6.756229560541E-02,1.55));+#8989 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.55));+#8990 = PCURVE('',#8961,#8991);+#8991 = DEFINITIONAL_REPRESENTATION('',(#8992),#8998);+#8992 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#8993,#8994,#8995,#8996,#8997),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8993 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#8994 = CARTESIAN_POINT('',(0.750059655691,-5.00001E-02));+#8995 = CARTESIAN_POINT('',(0.500065923144,-5.00001E-02));+#8996 = CARTESIAN_POINT('',(0.250039202852,-5.00001E-02));+#8997 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#8998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#8999 = PCURVE('',#9000,#9005);+#9000 = PLANE('',#9001);+#9001 = AXIS2_PLACEMENT_3D('',#9002,#9003,#9004);+#9002 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#9003 = DIRECTION('',(0.,0.,1.));+#9004 = DIRECTION('',(0.436386464522,-0.899759330922,0.));+#9005 = DEFINITIONAL_REPRESENTATION('',(#9006),#9012);+#9006 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9007,#9008,#9009,#9010,#9011),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9007 = CARTESIAN_POINT('',(1.602163073966,0.408635209304));+#9008 = CARTESIAN_POINT('',(1.60584136577,0.416219260692));+#9009 = CARTESIAN_POINT('',(1.609682713537,0.421964869492));+#9010 = CARTESIAN_POINT('',(1.613686973139,0.425869646612));+#9011 = CARTESIAN_POINT('',(1.617853839458,0.427933007842));+#9012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9013 = ORIENTED_EDGE('',*,*,#9014,.T.);+#9014 = EDGE_CURVE('',#8981,#8918,#9015,.T.);+#9015 = SURFACE_CURVE('',#9016,(#9020,#9027),.PCURVE_S1.);+#9016 = LINE('',#9017,#9018);+#9017 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.6000001)+ );+#9018 = VECTOR('',#9019,1.);+#9019 = DIRECTION('',(-0.,-0.,-1.));+#9020 = PCURVE('',#8961,#9021);+#9021 = DEFINITIONAL_REPRESENTATION('',(#9022),#9026);+#9022 = LINE('',#9023,#9024);+#9023 = CARTESIAN_POINT('',(0.,0.));+#9024 = VECTOR('',#9025,1.);+#9025 = DIRECTION('',(0.,-1.));+#9026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9027 = PCURVE('',#8933,#9028);+#9028 = DEFINITIONAL_REPRESENTATION('',(#9029),#9033);+#9029 = LINE('',#9030,#9031);+#9030 = CARTESIAN_POINT('',(1.,0.));+#9031 = VECTOR('',#9032,1.);+#9032 = DIRECTION('',(0.,-1.));+#9033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9034 = ORIENTED_EDGE('',*,*,#8947,.T.);+#9035 = ORIENTED_EDGE('',*,*,#9036,.F.);+#9036 = EDGE_CURVE('',#8979,#8772,#9037,.T.);+#9037 = SURFACE_CURVE('',#9038,(#9042,#9049),.PCURVE_S1.);+#9038 = LINE('',#9039,#9040);+#9039 = CARTESIAN_POINT('',(0.420011393229,7.041015625E-02,1.6000001));+#9040 = VECTOR('',#9041,1.);+#9041 = DIRECTION('',(-0.,-0.,-1.));+#9042 = PCURVE('',#8961,#9043);+#9043 = DEFINITIONAL_REPRESENTATION('',(#9044),#9048);+#9044 = LINE('',#9045,#9046);+#9045 = CARTESIAN_POINT('',(1.,0.));+#9046 = VECTOR('',#9047,1.);+#9047 = DIRECTION('',(0.,-1.));+#9048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9049 = PCURVE('',#8789,#9050);+#9050 = DEFINITIONAL_REPRESENTATION('',(#9051),#9055);+#9051 = LINE('',#9052,#9053);+#9052 = CARTESIAN_POINT('',(0.,0.));+#9053 = VECTOR('',#9054,1.);+#9054 = DIRECTION('',(0.,-1.));+#9055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9056 = ADVANCED_FACE('',(#9057),#9000,.T.);+#9057 = FACE_BOUND('',#9058,.T.);+#9058 = EDGE_LOOP('',(#9059,#9060,#9081,#9102,#9123,#9152,#9181));+#9059 = ORIENTED_EDGE('',*,*,#8978,.F.);+#9060 = ORIENTED_EDGE('',*,*,#9061,.T.);+#9061 = EDGE_CURVE('',#8979,#9062,#9064,.T.);+#9062 = VERTEX_POINT('',#9063);+#9063 = CARTESIAN_POINT('',(0.393237304688,7.041015625E-02,1.55));+#9064 = SURFACE_CURVE('',#9065,(#9069,#9075),.PCURVE_S1.);+#9065 = LINE('',#9066,#9067);+#9066 = CARTESIAN_POINT('',(-0.113406417746,7.041015625E-02,1.55));+#9067 = VECTOR('',#9068,1.);+#9068 = DIRECTION('',(-1.,0.,0.));+#9069 = PCURVE('',#9000,#9070);+#9070 = DEFINITIONAL_REPRESENTATION('',(#9071),#9074);+#9071 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9072,#9073),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.533417810976,-0.506643722434),.PIECEWISE_BEZIER_KNOTS.);+#9072 = CARTESIAN_POINT('',(1.602163073966,0.408635209304));+#9073 = CARTESIAN_POINT('',(1.590479224127,0.384544973312));+#9074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9075 = PCURVE('',#8789,#9076);+#9076 = DEFINITIONAL_REPRESENTATION('',(#9077),#9080);+#9077 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9078,#9079),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.533417810976,-0.506643722434),.PIECEWISE_BEZIER_KNOTS.);+#9078 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9079 = CARTESIAN_POINT('',(2.677408854167E-02,-5.00001E-02));+#9080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9081 = ORIENTED_EDGE('',*,*,#9082,.T.);+#9082 = EDGE_CURVE('',#9062,#9083,#9085,.T.);+#9083 = VERTEX_POINT('',#9084);+#9084 = CARTESIAN_POINT('',(0.393237304688,1.9140625E-02,1.55));+#9085 = SURFACE_CURVE('',#9086,(#9090,#9096),.PCURVE_S1.);+#9086 = LINE('',#9087,#9088);+#9087 = CARTESIAN_POINT('',(0.393237304688,0.702029306847,1.55));+#9088 = VECTOR('',#9089,1.);+#9089 = DIRECTION('',(0.,-1.,0.));+#9090 = PCURVE('',#9000,#9091);+#9091 = DEFINITIONAL_REPRESENTATION('',(#9092),#9095);+#9092 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9093,#9094),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.631619150596,0.682888681846),.PIECEWISE_BEZIER_KNOTS.);+#9093 = CARTESIAN_POINT('',(1.590479224127,0.384544973312));+#9094 = CARTESIAN_POINT('',(1.636609463261,0.362171643832));+#9095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9096 = PCURVE('',#8817,#9097);+#9097 = DEFINITIONAL_REPRESENTATION('',(#9098),#9101);+#9098 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9099,#9100),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.631619150596,0.682888681846),.PIECEWISE_BEZIER_KNOTS.);+#9099 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9100 = CARTESIAN_POINT('',(5.126953125E-02,-5.00001E-02));+#9101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9102 = ORIENTED_EDGE('',*,*,#9103,.T.);+#9103 = EDGE_CURVE('',#9083,#9104,#9106,.T.);+#9104 = VERTEX_POINT('',#9105);+#9105 = CARTESIAN_POINT('',(0.420011393229,1.9140625E-02,1.55));+#9106 = SURFACE_CURVE('',#9107,(#9111,#9117),.PCURVE_S1.);+#9107 = LINE('',#9108,#9109);+#9108 = CARTESIAN_POINT('',(-0.126793462017,1.9140625E-02,1.55));+#9109 = VECTOR('',#9110,1.);+#9110 = DIRECTION('',(1.,0.,-0.));+#9111 = PCURVE('',#9000,#9112);+#9112 = DEFINITIONAL_REPRESENTATION('',(#9113),#9116);+#9113 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9114,#9115),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.520030766705,0.546804855246),.PIECEWISE_BEZIER_KNOTS.);+#9114 = CARTESIAN_POINT('',(1.636609463261,0.362171643832));+#9115 = CARTESIAN_POINT('',(1.648293313101,0.386261879824));+#9116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9117 = PCURVE('',#8845,#9118);+#9118 = DEFINITIONAL_REPRESENTATION('',(#9119),#9122);+#9119 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9120,#9121),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.520030766705,0.546804855246),.PIECEWISE_BEZIER_KNOTS.);+#9120 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9121 = CARTESIAN_POINT('',(2.677408854167E-02,-5.00001E-02));+#9122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9123 = ORIENTED_EDGE('',*,*,#9124,.F.);+#9124 = EDGE_CURVE('',#9125,#9104,#9127,.T.);+#9125 = VERTEX_POINT('',#9126);+#9126 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.55));+#9127 = SURFACE_CURVE('',#9128,(#9134,#9143),.PCURVE_S1.);+#9128 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9129,#9130,#9131,#9132,#9133),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9129 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.55));+#9130 = CARTESIAN_POINT('',(0.440376273143,2.233028696224E-02,1.55));+#9131 = CARTESIAN_POINT('',(0.435115595743,2.020352150691E-02,1.55));+#9132 = CARTESIAN_POINT('',(0.428326606699,1.9140625E-02,1.55));+#9133 = CARTESIAN_POINT('',(0.420011393229,1.9140625E-02,1.55));+#9134 = PCURVE('',#9000,#9135);+#9135 = DEFINITIONAL_REPRESENTATION('',(#9136),#9142);+#9136 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9137,#9138,#9139,#9140,#9141),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9137 = CARTESIAN_POINT('',(1.653068125975,0.410727328775));+#9138 = CARTESIAN_POINT('',(1.654310342934,0.405977295857));+#9139 = CARTESIAN_POINT('',(1.653928231585,0.400315860621));+#9140 = CARTESIAN_POINT('',(1.651921959708,0.393743570732));+#9141 = CARTESIAN_POINT('',(1.648293313101,0.386261879824));+#9142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9143 = PCURVE('',#8873,#9144);+#9144 = DEFINITIONAL_REPRESENTATION('',(#9145),#9151);+#9145 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9146,#9147,#9148,#9149,#9150),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9146 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9147 = CARTESIAN_POINT('',(0.749965345612,-5.00001E-02));+#9148 = CARTESIAN_POINT('',(0.49993993246,-5.00001E-02));+#9149 = CARTESIAN_POINT('',(0.249944577088,-5.00001E-02));+#9150 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9152 = ORIENTED_EDGE('',*,*,#9153,.F.);+#9153 = EDGE_CURVE('',#9154,#9125,#9156,.T.);+#9154 = VERTEX_POINT('',#9155);+#9155 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.55));+#9156 = SURFACE_CURVE('',#9157,(#9163,#9172),.PCURVE_S1.);+#9157 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9158,#9159,#9160,#9161,#9162),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9158 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.55));+#9159 = CARTESIAN_POINT('',(0.451570638021,3.902284585364E-02,1.55));+#9160 = CARTESIAN_POINT('',(0.450327239118,3.321189177274E-02,1.55));+#9161 = CARTESIAN_POINT('',(0.447839606318,2.871115196638E-02,1.55));+#9162 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.55));+#9163 = PCURVE('',#9000,#9164);+#9164 = DEFINITIONAL_REPRESENTATION('',(#9165),#9171);+#9165 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9166,#9167,#9168,#9169,#9170),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9166 = CARTESIAN_POINT('',(1.637770081081,0.426440891662));+#9167 = CARTESIAN_POINT('',(1.644176126626,0.423333936868));+#9168 = CARTESIAN_POINT('',(1.64886198433,0.419679355396));+#9169 = CARTESIAN_POINT('',(1.651825997685,0.41547702264));+#9170 = CARTESIAN_POINT('',(1.653068125975,0.410727328775));+#9171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9172 = PCURVE('',#8903,#9173);+#9173 = DEFINITIONAL_REPRESENTATION('',(#9174),#9180);+#9174 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9175,#9176,#9177,#9178,#9179),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9175 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9176 = CARTESIAN_POINT('',(0.750036370999,-5.00001E-02));+#9177 = CARTESIAN_POINT('',(0.500035461082,-5.00001E-02));+#9178 = CARTESIAN_POINT('',(0.250016807161,-5.00001E-02));+#9179 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9181 = ORIENTED_EDGE('',*,*,#9182,.F.);+#9182 = EDGE_CURVE('',#8981,#9154,#9183,.T.);+#9183 = SURFACE_CURVE('',#9184,(#9190,#9199),.PCURVE_S1.);+#9184 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9185,#9186,#9187,#9188,#9189),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9185 = CARTESIAN_POINT('',(0.444222005208,6.471354166667E-02,1.55));+#9186 = CARTESIAN_POINT('',(0.447896483659,6.186510875926E-02,1.55));+#9187 = CARTESIAN_POINT('',(0.450346146155,5.782023140682E-02,1.55));+#9188 = CARTESIAN_POINT('',(0.451570638021,5.257901617716E-02,1.55));+#9189 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.55));+#9190 = PCURVE('',#9000,#9191);+#9191 = DEFINITIONAL_REPRESENTATION('',(#9192),#9198);+#9192 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9193,#9194,#9195,#9196,#9197),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9193 = CARTESIAN_POINT('',(1.617853839458,0.427933007842));+#9194 = CARTESIAN_POINT('',(1.622020236205,0.429996136548));+#9195 = CARTESIAN_POINT('',(1.626728651901,0.43043511351));+#9196 = CARTESIAN_POINT('',(1.631978835886,0.429249666108));+#9197 = CARTESIAN_POINT('',(1.637770081081,0.426440891662));+#9198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9199 = PCURVE('',#8933,#9200);+#9200 = DEFINITIONAL_REPRESENTATION('',(#9201),#9207);+#9201 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9202,#9203,#9204,#9205,#9206),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9202 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9203 = CARTESIAN_POINT('',(0.749988974527,-5.00001E-02));+#9204 = CARTESIAN_POINT('',(0.49997357669,-5.00001E-02));+#9205 = CARTESIAN_POINT('',(0.249971399447,-5.00001E-02));+#9206 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9208 = ADVANCED_FACE('',(#9209),#8933,.T.);+#9209 = FACE_BOUND('',#9210,.T.);+#9210 = EDGE_LOOP('',(#9211,#9212,#9233,#9234));+#9211 = ORIENTED_EDGE('',*,*,#9182,.T.);+#9212 = ORIENTED_EDGE('',*,*,#9213,.T.);+#9213 = EDGE_CURVE('',#9154,#8888,#9214,.T.);+#9214 = SURFACE_CURVE('',#9215,(#9219,#9226),.PCURVE_S1.);+#9215 = LINE('',#9216,#9217);+#9216 = CARTESIAN_POINT('',(0.451570638021,4.6142578125E-02,1.6000001));+#9217 = VECTOR('',#9218,1.);+#9218 = DIRECTION('',(-0.,-0.,-1.));+#9219 = PCURVE('',#8933,#9220);+#9220 = DEFINITIONAL_REPRESENTATION('',(#9221),#9225);+#9221 = LINE('',#9222,#9223);+#9222 = CARTESIAN_POINT('',(0.,0.));+#9223 = VECTOR('',#9224,1.);+#9224 = DIRECTION('',(0.,-1.));+#9225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9226 = PCURVE('',#8903,#9227);+#9227 = DEFINITIONAL_REPRESENTATION('',(#9228),#9232);+#9228 = LINE('',#9229,#9230);+#9229 = CARTESIAN_POINT('',(1.,0.));+#9230 = VECTOR('',#9231,1.);+#9231 = DIRECTION('',(0.,-1.));+#9232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9233 = ORIENTED_EDGE('',*,*,#8917,.T.);+#9234 = ORIENTED_EDGE('',*,*,#9014,.F.);+#9235 = ADVANCED_FACE('',(#9236),#8903,.T.);+#9236 = FACE_BOUND('',#9237,.T.);+#9237 = EDGE_LOOP('',(#9238,#9239,#9260,#9261));+#9238 = ORIENTED_EDGE('',*,*,#9153,.T.);+#9239 = ORIENTED_EDGE('',*,*,#9240,.T.);+#9240 = EDGE_CURVE('',#9125,#8858,#9241,.T.);+#9241 = SURFACE_CURVE('',#9242,(#9246,#9253),.PCURVE_S1.);+#9242 = LINE('',#9243,#9244);+#9243 = CARTESIAN_POINT('',(0.444108072917,2.552083333333E-02,1.6000001)+ );+#9244 = VECTOR('',#9245,1.);+#9245 = DIRECTION('',(-0.,-0.,-1.));+#9246 = PCURVE('',#8903,#9247);+#9247 = DEFINITIONAL_REPRESENTATION('',(#9248),#9252);+#9248 = LINE('',#9249,#9250);+#9249 = CARTESIAN_POINT('',(0.,0.));+#9250 = VECTOR('',#9251,1.);+#9251 = DIRECTION('',(0.,-1.));+#9252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9253 = PCURVE('',#8873,#9254);+#9254 = DEFINITIONAL_REPRESENTATION('',(#9255),#9259);+#9255 = LINE('',#9256,#9257);+#9256 = CARTESIAN_POINT('',(1.,0.));+#9257 = VECTOR('',#9258,1.);+#9258 = DIRECTION('',(0.,-1.));+#9259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9260 = ORIENTED_EDGE('',*,*,#8887,.T.);+#9261 = ORIENTED_EDGE('',*,*,#9213,.F.);+#9262 = ADVANCED_FACE('',(#9263),#8873,.T.);+#9263 = FACE_BOUND('',#9264,.T.);+#9264 = EDGE_LOOP('',(#9265,#9266,#9287,#9288));+#9265 = ORIENTED_EDGE('',*,*,#9124,.T.);+#9266 = ORIENTED_EDGE('',*,*,#9267,.T.);+#9267 = EDGE_CURVE('',#9104,#8830,#9268,.T.);+#9268 = SURFACE_CURVE('',#9269,(#9273,#9280),.PCURVE_S1.);+#9269 = LINE('',#9270,#9271);+#9270 = CARTESIAN_POINT('',(0.420011393229,1.9140625E-02,1.6000001));+#9271 = VECTOR('',#9272,1.);+#9272 = DIRECTION('',(-0.,-0.,-1.));+#9273 = PCURVE('',#8873,#9274);+#9274 = DEFINITIONAL_REPRESENTATION('',(#9275),#9279);+#9275 = LINE('',#9276,#9277);+#9276 = CARTESIAN_POINT('',(0.,0.));+#9277 = VECTOR('',#9278,1.);+#9278 = DIRECTION('',(0.,-1.));+#9279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9280 = PCURVE('',#8845,#9281);+#9281 = DEFINITIONAL_REPRESENTATION('',(#9282),#9286);+#9282 = LINE('',#9283,#9284);+#9283 = CARTESIAN_POINT('',(2.677408854167E-02,0.));+#9284 = VECTOR('',#9285,1.);+#9285 = DIRECTION('',(0.,-1.));+#9286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9287 = ORIENTED_EDGE('',*,*,#8857,.T.);+#9288 = ORIENTED_EDGE('',*,*,#9240,.F.);+#9289 = ADVANCED_FACE('',(#9290),#8845,.T.);+#9290 = FACE_BOUND('',#9291,.T.);+#9291 = EDGE_LOOP('',(#9292,#9293,#9314,#9315));+#9292 = ORIENTED_EDGE('',*,*,#9103,.F.);+#9293 = ORIENTED_EDGE('',*,*,#9294,.T.);+#9294 = EDGE_CURVE('',#9083,#8802,#9295,.T.);+#9295 = SURFACE_CURVE('',#9296,(#9300,#9307),.PCURVE_S1.);+#9296 = LINE('',#9297,#9298);+#9297 = CARTESIAN_POINT('',(0.393237304688,1.9140625E-02,1.6000001));+#9298 = VECTOR('',#9299,1.);+#9299 = DIRECTION('',(-0.,-0.,-1.));+#9300 = PCURVE('',#8845,#9301);+#9301 = DEFINITIONAL_REPRESENTATION('',(#9302),#9306);+#9302 = LINE('',#9303,#9304);+#9303 = CARTESIAN_POINT('',(0.,0.));+#9304 = VECTOR('',#9305,1.);+#9305 = DIRECTION('',(0.,-1.));+#9306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9307 = PCURVE('',#8817,#9308);+#9308 = DEFINITIONAL_REPRESENTATION('',(#9309),#9313);+#9309 = LINE('',#9310,#9311);+#9310 = CARTESIAN_POINT('',(5.126953125E-02,0.));+#9311 = VECTOR('',#9312,1.);+#9312 = DIRECTION('',(0.,-1.));+#9313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9314 = ORIENTED_EDGE('',*,*,#8829,.T.);+#9315 = ORIENTED_EDGE('',*,*,#9267,.F.);+#9316 = ADVANCED_FACE('',(#9317),#8817,.T.);+#9317 = FACE_BOUND('',#9318,.T.);+#9318 = EDGE_LOOP('',(#9319,#9320,#9341,#9342));+#9319 = ORIENTED_EDGE('',*,*,#9082,.F.);+#9320 = ORIENTED_EDGE('',*,*,#9321,.T.);+#9321 = EDGE_CURVE('',#9062,#8774,#9322,.T.);+#9322 = SURFACE_CURVE('',#9323,(#9327,#9334),.PCURVE_S1.);+#9323 = LINE('',#9324,#9325);+#9324 = CARTESIAN_POINT('',(0.393237304688,7.041015625E-02,1.6000001));+#9325 = VECTOR('',#9326,1.);+#9326 = DIRECTION('',(-0.,-0.,-1.));+#9327 = PCURVE('',#8817,#9328);+#9328 = DEFINITIONAL_REPRESENTATION('',(#9329),#9333);+#9329 = LINE('',#9330,#9331);+#9330 = CARTESIAN_POINT('',(0.,0.));+#9331 = VECTOR('',#9332,1.);+#9332 = DIRECTION('',(0.,-1.));+#9333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9334 = PCURVE('',#8789,#9335);+#9335 = DEFINITIONAL_REPRESENTATION('',(#9336),#9340);+#9336 = LINE('',#9337,#9338);+#9337 = CARTESIAN_POINT('',(2.677408854167E-02,0.));+#9338 = VECTOR('',#9339,1.);+#9339 = DIRECTION('',(0.,-1.));+#9340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9341 = ORIENTED_EDGE('',*,*,#8801,.T.);+#9342 = ORIENTED_EDGE('',*,*,#9294,.F.);+#9343 = ADVANCED_FACE('',(#9344),#8789,.T.);+#9344 = FACE_BOUND('',#9345,.T.);+#9345 = EDGE_LOOP('',(#9346,#9347,#9348,#9349));+#9346 = ORIENTED_EDGE('',*,*,#9061,.F.);+#9347 = ORIENTED_EDGE('',*,*,#9036,.T.);+#9348 = ORIENTED_EDGE('',*,*,#8771,.T.);+#9349 = ORIENTED_EDGE('',*,*,#9321,.F.);+#9350 = ADVANCED_FACE('',(#9351),#8755,.T.);+#9351 = FACE_BOUND('',#9352,.T.);+#9352 = EDGE_LOOP('',(#9353,#9389,#9410,#9411));+#9353 = ORIENTED_EDGE('',*,*,#9354,.T.);+#9354 = EDGE_CURVE('',#9355,#9357,#9359,.T.);+#9355 = VERTEX_POINT('',#9356);+#9356 = CARTESIAN_POINT('',(0.420467122396,4.557291666667E-04,1.55));+#9357 = VERTEX_POINT('',#9358);+#9358 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.55));+#9359 = SURFACE_CURVE('',#9360,(#9366,#9375),.PCURVE_S1.);+#9360 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9361,#9362,#9363,#9364,#9365),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9361 = CARTESIAN_POINT('',(0.420467122396,4.557291666665E-04,1.55));+#9362 = CARTESIAN_POINT('',(0.430034768014,4.557291666665E-04,1.55));+#9363 = CARTESIAN_POINT('',(0.437915831864,-8.442727612255E-04,1.55));+#9364 = CARTESIAN_POINT('',(0.444107309012,-3.445789450113E-03,1.55));+#9365 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.55));+#9366 = PCURVE('',#8755,#9367);+#9367 = DEFINITIONAL_REPRESENTATION('',(#9368),#9374);+#9368 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9369,#9370,#9371,#9372,#9373),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9369 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9370 = CARTESIAN_POINT('',(0.750069665494,-5.00001E-02));+#9371 = CARTESIAN_POINT('',(0.500074760681,-5.00001E-02));+#9372 = CARTESIAN_POINT('',(0.250042436064,-5.00001E-02));+#9373 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9375 = PCURVE('',#9376,#9381);+#9376 = PLANE('',#9377);+#9377 = AXIS2_PLACEMENT_3D('',#9378,#9379,#9380);+#9378 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#9379 = DIRECTION('',(0.,0.,1.));+#9380 = DIRECTION('',(0.436386464522,-0.899759330922,0.));+#9381 = DEFINITIONAL_REPRESENTATION('',(#9382),#9388);+#9382 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9383,#9384,#9385,#9386,#9387),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9383 = CARTESIAN_POINT('',(1.665304096514,0.378518090762));+#9384 = CARTESIAN_POINT('',(1.669479287559,0.387126669181));+#9385 = CARTESIAN_POINT('',(1.674088166014,0.393650426673));+#9386 = CARTESIAN_POINT('',(1.679130781752,0.398085999339));+#9387 = CARTESIAN_POINT('',(1.684606615985,0.400432748532));+#9388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9389 = ORIENTED_EDGE('',*,*,#9390,.T.);+#9390 = EDGE_CURVE('',#9357,#8712,#9391,.T.);+#9391 = SURFACE_CURVE('',#9392,(#9396,#9403),.PCURVE_S1.);+#9392 = LINE('',#9393,#9394);+#9393 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.6000001)+ );+#9394 = VECTOR('',#9395,1.);+#9395 = DIRECTION('',(-0.,-0.,-1.));+#9396 = PCURVE('',#8755,#9397);+#9397 = DEFINITIONAL_REPRESENTATION('',(#9398),#9402);+#9398 = LINE('',#9399,#9400);+#9399 = CARTESIAN_POINT('',(0.,0.));+#9400 = VECTOR('',#9401,1.);+#9401 = DIRECTION('',(0.,-1.));+#9402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9403 = PCURVE('',#8727,#9404);+#9404 = DEFINITIONAL_REPRESENTATION('',(#9405),#9409);+#9405 = LINE('',#9406,#9407);+#9406 = CARTESIAN_POINT('',(1.,0.));+#9407 = VECTOR('',#9408,1.);+#9408 = DIRECTION('',(0.,-1.));+#9409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9410 = ORIENTED_EDGE('',*,*,#8741,.T.);+#9411 = ORIENTED_EDGE('',*,*,#9412,.F.);+#9412 = EDGE_CURVE('',#9355,#8566,#9413,.T.);+#9413 = SURFACE_CURVE('',#9414,(#9418,#9425),.PCURVE_S1.);+#9414 = LINE('',#9415,#9416);+#9415 = CARTESIAN_POINT('',(0.420467122396,4.557291666667E-04,1.6000001)+ );+#9416 = VECTOR('',#9417,1.);+#9417 = DIRECTION('',(-0.,-0.,-1.));+#9418 = PCURVE('',#8755,#9419);+#9419 = DEFINITIONAL_REPRESENTATION('',(#9420),#9424);+#9420 = LINE('',#9421,#9422);+#9421 = CARTESIAN_POINT('',(1.,0.));+#9422 = VECTOR('',#9423,1.);+#9423 = DIRECTION('',(0.,-1.));+#9424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9425 = PCURVE('',#8583,#9426);+#9426 = DEFINITIONAL_REPRESENTATION('',(#9427),#9431);+#9427 = LINE('',#9428,#9429);+#9428 = CARTESIAN_POINT('',(0.,0.));+#9429 = VECTOR('',#9430,1.);+#9430 = DIRECTION('',(0.,-1.));+#9431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9432 = ADVANCED_FACE('',(#9433),#9376,.T.);+#9433 = FACE_BOUND('',#9434,.T.);+#9434 = EDGE_LOOP('',(#9435,#9436,#9457,#9478,#9499,#9528,#9557));+#9435 = ORIENTED_EDGE('',*,*,#9354,.F.);+#9436 = ORIENTED_EDGE('',*,*,#9437,.T.);+#9437 = EDGE_CURVE('',#9355,#9438,#9440,.T.);+#9438 = VERTEX_POINT('',#9439);+#9439 = CARTESIAN_POINT('',(0.393237304688,4.557291666667E-04,1.55));+#9440 = SURFACE_CURVE('',#9441,(#9445,#9451),.PCURVE_S1.);+#9441 = LINE('',#9442,#9443);+#9442 = CARTESIAN_POINT('',(-0.113178553163,4.557291666667E-04,1.55));+#9443 = VECTOR('',#9444,1.);+#9444 = DIRECTION('',(-1.,0.,0.));+#9445 = PCURVE('',#9376,#9446);+#9446 = DEFINITIONAL_REPRESENTATION('',(#9447),#9450);+#9447 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9448,#9449),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.533645675559,-0.506415857851),.PIECEWISE_BEZIER_KNOTS.);+#9448 = CARTESIAN_POINT('',(1.665304096514,0.378518090762));+#9449 = CARTESIAN_POINT('',(1.653421372635,0.354017808199));+#9450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9451 = PCURVE('',#8583,#9452);+#9452 = DEFINITIONAL_REPRESENTATION('',(#9453),#9456);+#9453 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9454,#9455),.UNSPECIFIED.,.F.,+ .F.,(2,2),(-0.533645675559,-0.506415857851),.PIECEWISE_BEZIER_KNOTS.);+#9454 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9455 = CARTESIAN_POINT('',(2.722981770833E-02,-5.00001E-02));+#9456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9457 = ORIENTED_EDGE('',*,*,#9458,.T.);+#9458 = EDGE_CURVE('',#9438,#9459,#9461,.T.);+#9459 = VERTEX_POINT('',#9460);+#9460 = CARTESIAN_POINT('',(0.393237304688,-6.1865234375E-02,1.55));+#9461 = SURFACE_CURVE('',#9462,(#9466,#9472),.PCURVE_S1.);+#9462 = LINE('',#9463,#9464);+#9463 = CARTESIAN_POINT('',(0.393237304688,0.667052093305,1.55));+#9464 = VECTOR('',#9465,1.);+#9465 = DIRECTION('',(0.,-1.,0.));+#9466 = PCURVE('',#9376,#9467);+#9467 = DEFINITIONAL_REPRESENTATION('',(#9468),#9471);+#9468 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9469,#9470),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.666596364138,0.72891732768),.PIECEWISE_BEZIER_KNOTS.);+#9469 = CARTESIAN_POINT('',(1.653421372635,0.354017808199));+#9470 = CARTESIAN_POINT('',(1.709495241093,0.326821783254));+#9471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9472 = PCURVE('',#8611,#9473);+#9473 = DEFINITIONAL_REPRESENTATION('',(#9474),#9477);+#9474 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9475,#9476),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.666596364138,0.72891732768),.PIECEWISE_BEZIER_KNOTS.);+#9475 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9476 = CARTESIAN_POINT('',(6.232096354167E-02,-5.00001E-02));+#9477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9478 = ORIENTED_EDGE('',*,*,#9479,.T.);+#9479 = EDGE_CURVE('',#9459,#9480,#9482,.T.);+#9480 = VERTEX_POINT('',#9481);+#9481 = CARTESIAN_POINT('',(0.420467122396,-6.1865234375E-02,1.55));+#9482 = SURFACE_CURVE('',#9483,(#9487,#9493),.PCURVE_S1.);+#9483 = LINE('',#9484,#9485);+#9484 = CARTESIAN_POINT('',(-0.126793462017,-6.1865234375E-02,1.55));+#9485 = VECTOR('',#9486,1.);+#9486 = DIRECTION('',(1.,0.,-0.));+#9487 = PCURVE('',#9376,#9488);+#9488 = DEFINITIONAL_REPRESENTATION('',(#9489),#9492);+#9489 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9490,#9491),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.520030766705,0.547260584413),.PIECEWISE_BEZIER_KNOTS.);+#9490 = CARTESIAN_POINT('',(1.709495241093,0.326821783254));+#9491 = CARTESIAN_POINT('',(1.721377964973,0.351322065816));+#9492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9493 = PCURVE('',#8639,#9494);+#9494 = DEFINITIONAL_REPRESENTATION('',(#9495),#9498);+#9495 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9496,#9497),.UNSPECIFIED.,.F.,+ .F.,(2,2),(0.520030766705,0.547260584413),.PIECEWISE_BEZIER_KNOTS.);+#9496 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9497 = CARTESIAN_POINT('',(2.722981770833E-02,-5.00001E-02));+#9498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9499 = ORIENTED_EDGE('',*,*,#9500,.F.);+#9500 = EDGE_CURVE('',#9501,#9480,#9503,.T.);+#9501 = VERTEX_POINT('',#9502);+#9502 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.55));+#9503 = SURFACE_CURVE('',#9504,(#9510,#9519),.PCURVE_S1.);+#9504 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9505,#9506,#9507,#9508,#9509),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9505 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.55));+#9506 = CARTESIAN_POINT('',(0.444790729626,-5.836258477971E-02,1.55));+#9507 = CARTESIAN_POINT('',(0.43859890991,-6.069822267601E-02,1.55));+#9508 = CARTESIAN_POINT('',(0.430489755144,-6.1865234375E-02,1.55));+#9509 = CARTESIAN_POINT('',(0.420467122396,-6.1865234375E-02,1.55));+#9510 = PCURVE('',#9376,#9511);+#9511 = DEFINITIONAL_REPRESENTATION('',(#9512),#9518);+#9512 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9513,#9514,#9515,#9516,#9517),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9513 = CARTESIAN_POINT('',(1.727552844956,0.380110176451));+#9514 = CARTESIAN_POINT('',(1.72884091628,0.374735967257));+#9515 = CARTESIAN_POINT('',(1.728240401956,0.368145578928));+#9516 = CARTESIAN_POINT('',(1.725751706243,0.360340023152));+#9517 = CARTESIAN_POINT('',(1.721377964973,0.351322065816));+#9518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9519 = PCURVE('',#8667,#9520);+#9520 = DEFINITIONAL_REPRESENTATION('',(#9521),#9527);+#9521 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9522,#9523,#9524,#9525,#9526),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9522 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9523 = CARTESIAN_POINT('',(0.749945169727,-5.00001E-02));+#9524 = CARTESIAN_POINT('',(0.499906742333,-5.00001E-02));+#9525 = CARTESIAN_POINT('',(0.249914998399,-5.00001E-02));+#9526 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9528 = ORIENTED_EDGE('',*,*,#9529,.F.);+#9529 = EDGE_CURVE('',#9530,#9501,#9532,.T.);+#9530 = VERTEX_POINT('',#9531);+#9531 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.55));+#9532 = SURFACE_CURVE('',#9533,(#9539,#9548),.PCURVE_S1.);+#9533 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9534,#9535,#9536,#9537,#9538),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9534 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.55));+#9535 = CARTESIAN_POINT('',(0.457609049479,-3.98178301284E-02,1.55));+#9536 = CARTESIAN_POINT('',(0.456185429912,-4.634107042966E-02,1.55));+#9537 = CARTESIAN_POINT('',(0.45333694836,-5.135468541747E-02,1.55));+#9538 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.55));+#9539 = PCURVE('',#9376,#9540);+#9540 = DEFINITIONAL_REPRESENTATION('',(#9541),#9547);+#9541 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9542,#9543,#9544,#9545,#9546),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9542 = CARTESIAN_POINT('',(1.710523125593,0.397866547906));+#9543 = CARTESIAN_POINT('',(1.717748841524,0.394362050069));+#9544 = CARTESIAN_POINT('',(1.722996939544,0.390234481308));+#9545 = CARTESIAN_POINT('',(1.726264947617,0.385483659733));+#9546 = CARTESIAN_POINT('',(1.727552844956,0.380110176451));+#9547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9548 = PCURVE('',#8697,#9549);+#9549 = DEFINITIONAL_REPRESENTATION('',(#9550),#9556);+#9550 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9551,#9552,#9553,#9554,#9555),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9551 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9552 = CARTESIAN_POINT('',(0.750046867736,-5.00001E-02));+#9553 = CARTESIAN_POINT('',(0.500045296574,-5.00001E-02));+#9554 = CARTESIAN_POINT('',(0.25002105453,-5.00001E-02));+#9555 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9557 = ORIENTED_EDGE('',*,*,#9558,.F.);+#9558 = EDGE_CURVE('',#9357,#9530,#9559,.T.);+#9559 = SURFACE_CURVE('',#9560,(#9566,#9575),.PCURVE_S1.);+#9560 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9561,#9562,#9563,#9564,#9565),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9561 = CARTESIAN_POINT('',(0.448608398438,-7.3486328125E-03,1.55));+#9562 = CARTESIAN_POINT('',(0.453109091749,-1.125113270889E-02,1.55));+#9563 = CARTESIAN_POINT('',(0.456109503872,-1.662556175311E-02,1.55));+#9564 = CARTESIAN_POINT('',(0.457609049479,-2.347161222064E-02,1.55));+#9565 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.55));+#9566 = PCURVE('',#9376,#9567);+#9567 = DEFINITIONAL_REPRESENTATION('',(#9568),#9574);+#9568 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9569,#9570,#9571,#9572,#9573),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9569 = CARTESIAN_POINT('',(1.684606615985,0.400432748532));+#9570 = CARTESIAN_POINT('',(1.690081968323,0.402779291202));+#9571 = CARTESIAN_POINT('',(1.696227000243,0.403133611918));+#9572 = CARTESIAN_POINT('',(1.703041179437,0.40149531831));+#9573 = CARTESIAN_POINT('',(1.710523125593,0.397866547906));+#9574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9575 = PCURVE('',#8727,#9576);+#9576 = DEFINITIONAL_REPRESENTATION('',(#9577),#9583);+#9577 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#9578,#9579,#9580,#9581,#9582),+ .UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9578 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#9579 = CARTESIAN_POINT('',(0.749979568682,-5.00001E-02));+#9580 = CARTESIAN_POINT('',(0.499955100116,-5.00001E-02));+#9581 = CARTESIAN_POINT('',(0.249953104288,-5.00001E-02));+#9582 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#9583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9584 = ADVANCED_FACE('',(#9585),#8727,.T.);+#9585 = FACE_BOUND('',#9586,.T.);+#9586 = EDGE_LOOP('',(#9587,#9588,#9609,#9610));+#9587 = ORIENTED_EDGE('',*,*,#9558,.T.);+#9588 = ORIENTED_EDGE('',*,*,#9589,.T.);+#9589 = EDGE_CURVE('',#9530,#8682,#9590,.T.);+#9590 = SURFACE_CURVE('',#9591,(#9595,#9602),.PCURVE_S1.);+#9591 = LINE('',#9592,#9593);+#9592 = CARTESIAN_POINT('',(0.457609049479,-3.1787109375E-02,1.6000001)+ );+#9593 = VECTOR('',#9594,1.);+#9594 = DIRECTION('',(-0.,-0.,-1.));+#9595 = PCURVE('',#8727,#9596);+#9596 = DEFINITIONAL_REPRESENTATION('',(#9597),#9601);+#9597 = LINE('',#9598,#9599);+#9598 = CARTESIAN_POINT('',(0.,0.));+#9599 = VECTOR('',#9600,1.);+#9600 = DIRECTION('',(0.,-1.));+#9601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9602 = PCURVE('',#8697,#9603);+#9603 = DEFINITIONAL_REPRESENTATION('',(#9604),#9608);+#9604 = LINE('',#9605,#9606);+#9605 = CARTESIAN_POINT('',(1.,0.));+#9606 = VECTOR('',#9607,1.);+#9607 = DIRECTION('',(0.,-1.));+#9608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9609 = ORIENTED_EDGE('',*,*,#8711,.T.);+#9610 = ORIENTED_EDGE('',*,*,#9390,.F.);+#9611 = ADVANCED_FACE('',(#9612),#8697,.T.);+#9612 = FACE_BOUND('',#9613,.T.);+#9613 = EDGE_LOOP('',(#9614,#9615,#9636,#9637));+#9614 = ORIENTED_EDGE('',*,*,#9529,.T.);+#9615 = ORIENTED_EDGE('',*,*,#9616,.T.);+#9616 = EDGE_CURVE('',#9501,#8652,#9617,.T.);+#9617 = SURFACE_CURVE('',#9618,(#9622,#9629),.PCURVE_S1.);+#9618 = LINE('',#9619,#9620);+#9619 = CARTESIAN_POINT('',(0.449064127604,-5.48583984375E-02,1.6000001)+ );+#9620 = VECTOR('',#9621,1.);+#9621 = DIRECTION('',(-0.,-0.,-1.));+#9622 = PCURVE('',#8697,#9623);+#9623 = DEFINITIONAL_REPRESENTATION('',(#9624),#9628);+#9624 = LINE('',#9625,#9626);+#9625 = CARTESIAN_POINT('',(0.,0.));+#9626 = VECTOR('',#9627,1.);+#9627 = DIRECTION('',(0.,-1.));+#9628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9629 = PCURVE('',#8667,#9630);+#9630 = DEFINITIONAL_REPRESENTATION('',(#9631),#9635);+#9631 = LINE('',#9632,#9633);+#9632 = CARTESIAN_POINT('',(1.,0.));+#9633 = VECTOR('',#9634,1.);+#9634 = DIRECTION('',(0.,-1.));+#9635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9636 = ORIENTED_EDGE('',*,*,#8681,.T.);+#9637 = ORIENTED_EDGE('',*,*,#9589,.F.);+#9638 = ADVANCED_FACE('',(#9639),#8667,.T.);+#9639 = FACE_BOUND('',#9640,.T.);+#9640 = EDGE_LOOP('',(#9641,#9642,#9663,#9664));+#9641 = ORIENTED_EDGE('',*,*,#9500,.T.);+#9642 = ORIENTED_EDGE('',*,*,#9643,.T.);+#9643 = EDGE_CURVE('',#9480,#8624,#9644,.T.);+#9644 = SURFACE_CURVE('',#9645,(#9649,#9656),.PCURVE_S1.);+#9645 = LINE('',#9646,#9647);+#9646 = CARTESIAN_POINT('',(0.420467122396,-6.1865234375E-02,1.6000001)+ );+#9647 = VECTOR('',#9648,1.);+#9648 = DIRECTION('',(-0.,-0.,-1.));+#9649 = PCURVE('',#8667,#9650);+#9650 = DEFINITIONAL_REPRESENTATION('',(#9651),#9655);+#9651 = LINE('',#9652,#9653);+#9652 = CARTESIAN_POINT('',(0.,0.));+#9653 = VECTOR('',#9654,1.);+#9654 = DIRECTION('',(0.,-1.));+#9655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9656 = PCURVE('',#8639,#9657);+#9657 = DEFINITIONAL_REPRESENTATION('',(#9658),#9662);+#9658 = LINE('',#9659,#9660);+#9659 = CARTESIAN_POINT('',(2.722981770833E-02,0.));+#9660 = VECTOR('',#9661,1.);+#9661 = DIRECTION('',(0.,-1.));+#9662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9663 = ORIENTED_EDGE('',*,*,#8651,.T.);+#9664 = ORIENTED_EDGE('',*,*,#9616,.F.);+#9665 = ADVANCED_FACE('',(#9666),#8639,.T.);+#9666 = FACE_BOUND('',#9667,.T.);+#9667 = EDGE_LOOP('',(#9668,#9669,#9690,#9691));+#9668 = ORIENTED_EDGE('',*,*,#9479,.F.);+#9669 = ORIENTED_EDGE('',*,*,#9670,.T.);+#9670 = EDGE_CURVE('',#9459,#8596,#9671,.T.);+#9671 = SURFACE_CURVE('',#9672,(#9676,#9683),.PCURVE_S1.);+#9672 = LINE('',#9673,#9674);+#9673 = CARTESIAN_POINT('',(0.393237304688,-6.1865234375E-02,1.6000001)+ );+#9674 = VECTOR('',#9675,1.);+#9675 = DIRECTION('',(-0.,-0.,-1.));+#9676 = PCURVE('',#8639,#9677);+#9677 = DEFINITIONAL_REPRESENTATION('',(#9678),#9682);+#9678 = LINE('',#9679,#9680);+#9679 = CARTESIAN_POINT('',(0.,0.));+#9680 = VECTOR('',#9681,1.);+#9681 = DIRECTION('',(0.,-1.));+#9682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9683 = PCURVE('',#8611,#9684);+#9684 = DEFINITIONAL_REPRESENTATION('',(#9685),#9689);+#9685 = LINE('',#9686,#9687);+#9686 = CARTESIAN_POINT('',(6.232096354167E-02,0.));+#9687 = VECTOR('',#9688,1.);+#9688 = DIRECTION('',(0.,-1.));+#9689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9690 = ORIENTED_EDGE('',*,*,#8623,.T.);+#9691 = ORIENTED_EDGE('',*,*,#9643,.F.);+#9692 = ADVANCED_FACE('',(#9693),#8611,.T.);+#9693 = FACE_BOUND('',#9694,.T.);+#9694 = EDGE_LOOP('',(#9695,#9696,#9717,#9718));+#9695 = ORIENTED_EDGE('',*,*,#9458,.F.);+#9696 = ORIENTED_EDGE('',*,*,#9697,.T.);+#9697 = EDGE_CURVE('',#9438,#8568,#9698,.T.);+#9698 = SURFACE_CURVE('',#9699,(#9703,#9710),.PCURVE_S1.);+#9699 = LINE('',#9700,#9701);+#9700 = CARTESIAN_POINT('',(0.393237304688,4.557291666667E-04,1.6000001)+ );+#9701 = VECTOR('',#9702,1.);+#9702 = DIRECTION('',(-0.,-0.,-1.));+#9703 = PCURVE('',#8611,#9704);+#9704 = DEFINITIONAL_REPRESENTATION('',(#9705),#9709);+#9705 = LINE('',#9706,#9707);+#9706 = CARTESIAN_POINT('',(0.,0.));+#9707 = VECTOR('',#9708,1.);+#9708 = DIRECTION('',(0.,-1.));+#9709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9710 = PCURVE('',#8583,#9711);+#9711 = DEFINITIONAL_REPRESENTATION('',(#9712),#9716);+#9712 = LINE('',#9713,#9714);+#9713 = CARTESIAN_POINT('',(2.722981770833E-02,0.));+#9714 = VECTOR('',#9715,1.);+#9715 = DIRECTION('',(0.,-1.));+#9716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9717 = ORIENTED_EDGE('',*,*,#8595,.T.);+#9718 = ORIENTED_EDGE('',*,*,#9670,.F.);+#9719 = ADVANCED_FACE('',(#9720),#8583,.T.);+#9720 = FACE_BOUND('',#9721,.T.);+#9721 = EDGE_LOOP('',(#9722,#9723,#9724,#9725));+#9722 = ORIENTED_EDGE('',*,*,#9437,.F.);+#9723 = ORIENTED_EDGE('',*,*,#9412,.T.);+#9724 = ORIENTED_EDGE('',*,*,#8565,.T.);+#9725 = ORIENTED_EDGE('',*,*,#9697,.F.);+#9726 = ADVANCED_FACE('',(#9727),#7653,.T.);+#9727 = FACE_BOUND('',#9728,.T.);+#9728 = EDGE_LOOP('',(#9729,#9730,#9751,#9752));+#9729 = ORIENTED_EDGE('',*,*,#7627,.T.);+#9730 = ORIENTED_EDGE('',*,*,#9731,.T.);+#9731 = EDGE_CURVE('',#7592,#8498,#9732,.T.);+#9732 = SURFACE_CURVE('',#9733,(#9737,#9744),.PCURVE_S1.);+#9733 = LINE('',#9734,#9735);+#9734 = CARTESIAN_POINT('',(0.480737304688,-3.406575520833E-02,1.6000001+ ));+#9735 = VECTOR('',#9736,1.);+#9736 = DIRECTION('',(-0.,-0.,-1.));+#9737 = PCURVE('',#7653,#9738);+#9738 = DEFINITIONAL_REPRESENTATION('',(#9739),#9743);+#9739 = LINE('',#9740,#9741);+#9740 = CARTESIAN_POINT('',(0.,0.));+#9741 = VECTOR('',#9742,1.);+#9742 = DIRECTION('',(0.,-1.));+#9743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9744 = PCURVE('',#7611,#9745);+#9745 = DEFINITIONAL_REPRESENTATION('',(#9746),#9750);+#9746 = LINE('',#9747,#9748);+#9747 = CARTESIAN_POINT('',(1.,0.));+#9748 = VECTOR('',#9749,1.);+#9749 = DIRECTION('',(0.,-1.));+#9750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9751 = ORIENTED_EDGE('',*,*,#8520,.T.);+#9752 = ORIENTED_EDGE('',*,*,#8259,.F.);+#9753 = ADVANCED_FACE('',(#9754),#7611,.T.);+#9754 = FACE_BOUND('',#9755,.T.);+#9755 = EDGE_LOOP('',(#9756,#9757,#9778,#9779));+#9756 = ORIENTED_EDGE('',*,*,#7591,.T.);+#9757 = ORIENTED_EDGE('',*,*,#9758,.T.);+#9758 = EDGE_CURVE('',#7556,#8475,#9759,.T.);+#9759 = SURFACE_CURVE('',#9760,(#9764,#9771),.PCURVE_S1.);+#9760 = LINE('',#9761,#9762);+#9761 = CARTESIAN_POINT('',(0.471223958333,-4.044596354167E-03,1.6000001+ ));+#9762 = VECTOR('',#9763,1.);+#9763 = DIRECTION('',(-0.,-0.,-1.));+#9764 = PCURVE('',#7611,#9765);+#9765 = DEFINITIONAL_REPRESENTATION('',(#9766),#9770);+#9766 = LINE('',#9767,#9768);+#9767 = CARTESIAN_POINT('',(0.,0.));+#9768 = VECTOR('',#9769,1.);+#9769 = DIRECTION('',(0.,-1.));+#9770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9771 = PCURVE('',#7575,#9772);+#9772 = DEFINITIONAL_REPRESENTATION('',(#9773),#9777);+#9773 = LINE('',#9774,#9775);+#9774 = CARTESIAN_POINT('',(1.,0.));+#9775 = VECTOR('',#9776,1.);+#9776 = DIRECTION('',(0.,-1.));+#9777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9778 = ORIENTED_EDGE('',*,*,#8497,.T.);+#9779 = ORIENTED_EDGE('',*,*,#9731,.F.);+#9780 = ADVANCED_FACE('',(#9781),#7575,.T.);+#9781 = FACE_BOUND('',#9782,.T.);+#9782 = EDGE_LOOP('',(#9783,#9784,#9805,#9806));+#9783 = ORIENTED_EDGE('',*,*,#7555,.T.);+#9784 = ORIENTED_EDGE('',*,*,#9785,.T.);+#9785 = EDGE_CURVE('',#7520,#8452,#9786,.T.);+#9786 = SURFACE_CURVE('',#9787,(#9791,#9798),.PCURVE_S1.);+#9787 = LINE('',#9788,#9789);+#9788 = CARTESIAN_POINT('',(0.444962565104,1.025390625E-02,1.6000001));+#9789 = VECTOR('',#9790,1.);+#9790 = DIRECTION('',(-0.,-0.,-1.));+#9791 = PCURVE('',#7575,#9792);+#9792 = DEFINITIONAL_REPRESENTATION('',(#9793),#9797);+#9793 = LINE('',#9794,#9795);+#9794 = CARTESIAN_POINT('',(0.,0.));+#9795 = VECTOR('',#9796,1.);+#9796 = DIRECTION('',(0.,-1.));+#9797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9798 = PCURVE('',#7539,#9799);+#9799 = DEFINITIONAL_REPRESENTATION('',(#9800),#9804);+#9800 = LINE('',#9801,#9802);+#9801 = CARTESIAN_POINT('',(1.,0.));+#9802 = VECTOR('',#9803,1.);+#9803 = DIRECTION('',(0.,-1.));+#9804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9805 = ORIENTED_EDGE('',*,*,#8474,.T.);+#9806 = ORIENTED_EDGE('',*,*,#9758,.F.);+#9807 = ADVANCED_FACE('',(#9808),#7539,.T.);+#9808 = FACE_BOUND('',#9809,.T.);+#9809 = EDGE_LOOP('',(#9810,#9811,#9832,#9833));+#9810 = ORIENTED_EDGE('',*,*,#7519,.T.);+#9811 = ORIENTED_EDGE('',*,*,#9812,.T.);+#9812 = EDGE_CURVE('',#7484,#8429,#9813,.T.);+#9813 = SURFACE_CURVE('',#9814,(#9818,#9825),.PCURVE_S1.);+#9814 = LINE('',#9815,#9816);+#9815 = CARTESIAN_POINT('',(0.467350260417,2.1533203125E-02,1.6000001));+#9816 = VECTOR('',#9817,1.);+#9817 = DIRECTION('',(-0.,-0.,-1.));+#9818 = PCURVE('',#7539,#9819);+#9819 = DEFINITIONAL_REPRESENTATION('',(#9820),#9824);+#9820 = LINE('',#9821,#9822);+#9821 = CARTESIAN_POINT('',(0.,0.));+#9822 = VECTOR('',#9823,1.);+#9823 = DIRECTION('',(0.,-1.));+#9824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9825 = PCURVE('',#7503,#9826);+#9826 = DEFINITIONAL_REPRESENTATION('',(#9827),#9831);+#9827 = LINE('',#9828,#9829);+#9828 = CARTESIAN_POINT('',(1.,0.));+#9829 = VECTOR('',#9830,1.);+#9830 = DIRECTION('',(0.,-1.));+#9831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9832 = ORIENTED_EDGE('',*,*,#8451,.T.);+#9833 = ORIENTED_EDGE('',*,*,#9785,.F.);+#9834 = ADVANCED_FACE('',(#9835),#7503,.T.);+#9835 = FACE_BOUND('',#9836,.T.);+#9836 = EDGE_LOOP('',(#9837,#9838,#9859,#9860));+#9837 = ORIENTED_EDGE('',*,*,#7483,.T.);+#9838 = ORIENTED_EDGE('',*,*,#9839,.T.);+#9839 = EDGE_CURVE('',#7439,#8406,#9840,.T.);+#9840 = SURFACE_CURVE('',#9841,(#9845,#9852),.PCURVE_S1.);+#9841 = LINE('',#9842,#9843);+#9842 = CARTESIAN_POINT('',(0.474812825521,4.6142578125E-02,1.6000001));+#9843 = VECTOR('',#9844,1.);+#9844 = DIRECTION('',(-0.,-0.,-1.));+#9845 = PCURVE('',#7503,#9846);+#9846 = DEFINITIONAL_REPRESENTATION('',(#9847),#9851);+#9847 = LINE('',#9848,#9849);+#9848 = CARTESIAN_POINT('',(0.,0.));+#9849 = VECTOR('',#9850,1.);+#9850 = DIRECTION('',(0.,-1.));+#9851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9852 = PCURVE('',#7464,#9853);+#9853 = DEFINITIONAL_REPRESENTATION('',(#9854),#9858);+#9854 = LINE('',#9855,#9856);+#9855 = CARTESIAN_POINT('',(1.,0.));+#9856 = VECTOR('',#9857,1.);+#9857 = DIRECTION('',(0.,-1.));+#9858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9859 = ORIENTED_EDGE('',*,*,#8428,.T.);+#9860 = ORIENTED_EDGE('',*,*,#9812,.F.);+#9861 = ADVANCED_FACE('',(#9862),#7464,.T.);+#9862 = FACE_BOUND('',#9863,.T.);+#9863 = EDGE_LOOP('',(#9864,#9865,#9886,#9887));+#9864 = ORIENTED_EDGE('',*,*,#7438,.T.);+#9865 = ORIENTED_EDGE('',*,*,#9866,.T.);+#9866 = EDGE_CURVE('',#7403,#8383,#9867,.T.);+#9867 = SURFACE_CURVE('',#9868,(#9872,#9879),.PCURVE_S1.);+#9868 = LINE('',#9869,#9870);+#9869 = CARTESIAN_POINT('',(0.460685221354,7.804361979167E-02,1.6000001)+ );+#9870 = VECTOR('',#9871,1.);+#9871 = DIRECTION('',(-0.,-0.,-1.));+#9872 = PCURVE('',#7464,#9873);+#9873 = DEFINITIONAL_REPRESENTATION('',(#9874),#9878);+#9874 = LINE('',#9875,#9876);+#9875 = CARTESIAN_POINT('',(0.,0.));+#9876 = VECTOR('',#9877,1.);+#9877 = DIRECTION('',(0.,-1.));+#9878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9879 = PCURVE('',#7422,#9880);+#9880 = DEFINITIONAL_REPRESENTATION('',(#9881),#9885);+#9881 = LINE('',#9882,#9883);+#9882 = CARTESIAN_POINT('',(1.,0.));+#9883 = VECTOR('',#9884,1.);+#9884 = DIRECTION('',(0.,-1.));+#9885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9886 = ORIENTED_EDGE('',*,*,#8405,.T.);+#9887 = ORIENTED_EDGE('',*,*,#9839,.F.);+#9888 = ADVANCED_FACE('',(#9889),#7422,.T.);+#9889 = FACE_BOUND('',#9890,.T.);+#9890 = EDGE_LOOP('',(#9891,#9892,#9913,#9914));+#9891 = ORIENTED_EDGE('',*,*,#7402,.T.);+#9892 = ORIENTED_EDGE('',*,*,#9893,.T.);+#9893 = EDGE_CURVE('',#7376,#8360,#9894,.T.);+#9894 = SURFACE_CURVE('',#9895,(#9899,#9906),.PCURVE_S1.);+#9895 = LINE('',#9896,#9897);+#9896 = CARTESIAN_POINT('',(0.420467122396,8.932291666667E-02,1.6000001)+ );+#9897 = VECTOR('',#9898,1.);+#9898 = DIRECTION('',(-0.,-0.,-1.));+#9899 = PCURVE('',#7422,#9900);+#9900 = DEFINITIONAL_REPRESENTATION('',(#9901),#9905);+#9901 = LINE('',#9902,#9903);+#9902 = CARTESIAN_POINT('',(0.,0.));+#9903 = VECTOR('',#9904,1.);+#9904 = DIRECTION('',(0.,-1.));+#9905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9906 = PCURVE('',#7391,#9907);+#9907 = DEFINITIONAL_REPRESENTATION('',(#9908),#9912);+#9908 = LINE('',#9909,#9910);+#9909 = CARTESIAN_POINT('',(5.035807291667E-02,0.));+#9910 = VECTOR('',#9911,1.);+#9911 = DIRECTION('',(0.,-1.));+#9912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9913 = ORIENTED_EDGE('',*,*,#8382,.T.);+#9914 = ORIENTED_EDGE('',*,*,#9866,.F.);+#9915 = ADVANCED_FACE('',(#9916),#7391,.T.);+#9916 = FACE_BOUND('',#9917,.T.);+#9917 = EDGE_LOOP('',(#9918,#9919,#9940,#9941));+#9918 = ORIENTED_EDGE('',*,*,#7375,.F.);+#9919 = ORIENTED_EDGE('',*,*,#9920,.T.);+#9920 = EDGE_CURVE('',#7349,#8337,#9921,.T.);+#9921 = SURFACE_CURVE('',#9922,(#9926,#9933),.PCURVE_S1.);+#9922 = LINE('',#9923,#9924);+#9923 = CARTESIAN_POINT('',(0.370109049479,8.932291666667E-02,1.6000001)+ );+#9924 = VECTOR('',#9925,1.);+#9925 = DIRECTION('',(-0.,-0.,-1.));+#9926 = PCURVE('',#7391,#9927);+#9927 = DEFINITIONAL_REPRESENTATION('',(#9928),#9932);+#9928 = LINE('',#9929,#9930);+#9929 = CARTESIAN_POINT('',(0.,0.));+#9930 = VECTOR('',#9931,1.);+#9931 = DIRECTION('',(0.,-1.));+#9932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9933 = PCURVE('',#7364,#9934);+#9934 = DEFINITIONAL_REPRESENTATION('',(#9935),#9939);+#9935 = LINE('',#9936,#9937);+#9936 = CARTESIAN_POINT('',(0.170100911458,0.));+#9937 = VECTOR('',#9938,1.);+#9938 = DIRECTION('',(0.,-1.));+#9939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9940 = ORIENTED_EDGE('',*,*,#8359,.T.);+#9941 = ORIENTED_EDGE('',*,*,#9893,.F.);+#9942 = ADVANCED_FACE('',(#9943),#7364,.T.);+#9943 = FACE_BOUND('',#9944,.T.);+#9944 = EDGE_LOOP('',(#9945,#9946,#9967,#9968));+#9945 = ORIENTED_EDGE('',*,*,#7348,.F.);+#9946 = ORIENTED_EDGE('',*,*,#9947,.T.);+#9947 = EDGE_CURVE('',#7322,#8335,#9948,.T.);+#9948 = SURFACE_CURVE('',#9949,(#9953,#9960),.PCURVE_S1.);+#9949 = LINE('',#9950,#9951);+#9950 = CARTESIAN_POINT('',(0.370109049479,-8.077799479167E-02,1.6000001+ ));+#9951 = VECTOR('',#9952,1.);+#9952 = DIRECTION('',(-0.,-0.,-1.));+#9953 = PCURVE('',#7364,#9954);+#9954 = DEFINITIONAL_REPRESENTATION('',(#9955),#9959);+#9955 = LINE('',#9956,#9957);+#9956 = CARTESIAN_POINT('',(0.,0.));+#9957 = VECTOR('',#9958,1.);+#9958 = DIRECTION('',(0.,-1.));+#9959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9960 = PCURVE('',#7337,#9961);+#9961 = DEFINITIONAL_REPRESENTATION('',(#9962),#9966);+#9962 = LINE('',#9963,#9964);+#9963 = CARTESIAN_POINT('',(5.035807291667E-02,0.));+#9964 = VECTOR('',#9965,1.);+#9965 = DIRECTION('',(0.,-1.));+#9966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9967 = ORIENTED_EDGE('',*,*,#8334,.T.);+#9968 = ORIENTED_EDGE('',*,*,#9920,.F.);+#9969 = ADVANCED_FACE('',(#9970),#7337,.T.);+#9970 = FACE_BOUND('',#9971,.T.);+#9971 = EDGE_LOOP('',(#9972,#9973,#9974,#9975));+#9972 = ORIENTED_EDGE('',*,*,#7319,.F.);+#9973 = ORIENTED_EDGE('',*,*,#8310,.T.);+#9974 = ORIENTED_EDGE('',*,*,#8542,.T.);+#9975 = ORIENTED_EDGE('',*,*,#9947,.F.);+#9976 = ADVANCED_FACE('',(#9977),#7306,.T.);+#9977 = FACE_BOUND('',#9978,.T.);+#9978 = EDGE_LOOP('',(#9979,#9980,#10003,#10031));+#9979 = ORIENTED_EDGE('',*,*,#7292,.F.);+#9980 = ORIENTED_EDGE('',*,*,#9981,.T.);+#9981 = EDGE_CURVE('',#7257,#9982,#9984,.T.);+#9982 = VERTEX_POINT('',#9983);+#9983 = CARTESIAN_POINT('',(0.260847981771,-8.077799479167E-02,1.5000001+ ));+#9984 = SURFACE_CURVE('',#9985,(#9989,#9996),.PCURVE_S1.);+#9985 = LINE('',#9986,#9987);+#9986 = CARTESIAN_POINT('',(0.260847981771,-8.077799479167E-02,1.6000001+ ));+#9987 = VECTOR('',#9988,1.);+#9988 = DIRECTION('',(-0.,-0.,-1.));+#9989 = PCURVE('',#7306,#9990);+#9990 = DEFINITIONAL_REPRESENTATION('',(#9991),#9995);+#9991 = LINE('',#9992,#9993);+#9992 = CARTESIAN_POINT('',(0.,0.));+#9993 = VECTOR('',#9994,1.);+#9994 = DIRECTION('',(0.,-1.));+#9995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#9996 = PCURVE('',#7276,#9997);+#9997 = DEFINITIONAL_REPRESENTATION('',(#9998),#10002);+#9998 = LINE('',#9999,#10000);+#9999 = CARTESIAN_POINT('',(1.,0.));+#10000 = VECTOR('',#10001,1.);+#10001 = DIRECTION('',(0.,-1.));+#10002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10003 = ORIENTED_EDGE('',*,*,#10004,.T.);+#10004 = EDGE_CURVE('',#9982,#10005,#10007,.T.);+#10005 = VERTEX_POINT('',#10006);+#10006 = CARTESIAN_POINT('',(0.226326497396,-8.077799479167E-02,+ 1.5000001));+#10007 = SURFACE_CURVE('',#10008,(#10012,#10019),.PCURVE_S1.);+#10008 = LINE('',#10009,#10010);+#10009 = CARTESIAN_POINT('',(0.260847981771,-8.077799479167E-02,+ 1.5000001));+#10010 = VECTOR('',#10011,1.);+#10011 = DIRECTION('',(-1.,0.,0.));+#10012 = PCURVE('',#7306,#10013);+#10013 = DEFINITIONAL_REPRESENTATION('',(#10014),#10018);+#10014 = LINE('',#10015,#10016);+#10015 = CARTESIAN_POINT('',(0.,-0.1));+#10016 = VECTOR('',#10017,1.);+#10017 = DIRECTION('',(1.,0.));+#10018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10019 = PCURVE('',#10020,#10025);+#10020 = PLANE('',#10021);+#10021 = AXIS2_PLACEMENT_3D('',#10022,#10023,#10024);+#10022 = CARTESIAN_POINT('',(0.210717773438,-8.077799479167E-02,+ 1.5000001));+#10023 = DIRECTION('',(0.,0.,1.));+#10024 = DIRECTION('',(1.,0.,0.));+#10025 = DEFINITIONAL_REPRESENTATION('',(#10026),#10030);+#10026 = LINE('',#10027,#10028);+#10027 = CARTESIAN_POINT('',(5.013020833333E-02,0.));+#10028 = VECTOR('',#10029,1.);+#10029 = DIRECTION('',(-1.,0.));+#10030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10031 = ORIENTED_EDGE('',*,*,#10032,.F.);+#10032 = EDGE_CURVE('',#7093,#10005,#10033,.T.);+#10033 = SURFACE_CURVE('',#10034,(#10038,#10045),.PCURVE_S1.);+#10034 = LINE('',#10035,#10036);+#10035 = CARTESIAN_POINT('',(0.226326497396,-8.077799479167E-02,+ 1.6000001));+#10036 = VECTOR('',#10037,1.);+#10037 = DIRECTION('',(-0.,-0.,-1.));+#10038 = PCURVE('',#7306,#10039);+#10039 = DEFINITIONAL_REPRESENTATION('',(#10040),#10044);+#10040 = LINE('',#10041,#10042);+#10041 = CARTESIAN_POINT('',(3.4521484375E-02,0.));+#10042 = VECTOR('',#10043,1.);+#10043 = DIRECTION('',(0.,-1.));+#10044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10045 = PCURVE('',#7110,#10046);+#10046 = DEFINITIONAL_REPRESENTATION('',(#10047),#10051);+#10047 = LINE('',#10048,#10049);+#10048 = CARTESIAN_POINT('',(0.,0.));+#10049 = VECTOR('',#10050,1.);+#10050 = DIRECTION('',(0.,-1.));+#10051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10052 = ADVANCED_FACE('',(#10053,#10192),#10020,.T.);+#10053 = FACE_BOUND('',#10054,.F.);+#10054 = EDGE_LOOP('',(#10055,#10080,#10103,#10126,#10149,#10170,#10171)+ );+#10055 = ORIENTED_EDGE('',*,*,#10056,.T.);+#10056 = EDGE_CURVE('',#10057,#10059,#10061,.T.);+#10057 = VERTEX_POINT('',#10058);+#10058 = CARTESIAN_POINT('',(0.226326497396,8.932291666667E-02,1.5000001+ ));+#10059 = VERTEX_POINT('',#10060);+#10060 = CARTESIAN_POINT('',(0.260847981771,8.932291666667E-02,1.5000001+ ));+#10061 = SURFACE_CURVE('',#10062,(#10066,#10073),.PCURVE_S1.);+#10062 = LINE('',#10063,#10064);+#10063 = CARTESIAN_POINT('',(0.226326497396,8.932291666667E-02,1.5000001+ ));+#10064 = VECTOR('',#10065,1.);+#10065 = DIRECTION('',(1.,0.,0.));+#10066 = PCURVE('',#10020,#10067);+#10067 = DEFINITIONAL_REPRESENTATION('',(#10068),#10072);+#10068 = LINE('',#10069,#10070);+#10069 = CARTESIAN_POINT('',(1.560872395833E-02,0.170100911458));+#10070 = VECTOR('',#10071,1.);+#10071 = DIRECTION('',(1.,0.));+#10072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10073 = PCURVE('',#7137,#10074);+#10074 = DEFINITIONAL_REPRESENTATION('',(#10075),#10079);+#10075 = LINE('',#10076,#10077);+#10076 = CARTESIAN_POINT('',(0.,-0.1));+#10077 = VECTOR('',#10078,1.);+#10078 = DIRECTION('',(1.,0.));+#10079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10080 = ORIENTED_EDGE('',*,*,#10081,.T.);+#10081 = EDGE_CURVE('',#10059,#10082,#10084,.T.);+#10082 = VERTEX_POINT('',#10083);+#10083 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.5000001+ ));+#10084 = SURFACE_CURVE('',#10085,(#10089,#10096),.PCURVE_S1.);+#10085 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10086,#10087,#10088),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10086 = CARTESIAN_POINT('',(0.260847981771,8.932291666667E-02,1.5000001+ ));+#10087 = CARTESIAN_POINT('',(0.299812825521,8.932291666667E-02,1.5000001+ ));+#10088 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.5000001+ ));+#10089 = PCURVE('',#10020,#10090);+#10090 = DEFINITIONAL_REPRESENTATION('',(#10091),#10095);+#10091 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10092,#10093,#10094),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10092 = CARTESIAN_POINT('',(5.013020833333E-02,0.170100911458));+#10093 = CARTESIAN_POINT('',(8.909505208333E-02,0.170100911458));+#10094 = CARTESIAN_POINT('',(0.107552083333,0.149365234375));+#10095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10096 = PCURVE('',#7168,#10097);+#10097 = DEFINITIONAL_REPRESENTATION('',(#10098),#10102);+#10098 = LINE('',#10099,#10100);+#10099 = CARTESIAN_POINT('',(0.,-0.1));+#10100 = VECTOR('',#10101,1.);+#10101 = DIRECTION('',(1.,0.));+#10102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10103 = ORIENTED_EDGE('',*,*,#10104,.T.);+#10104 = EDGE_CURVE('',#10082,#10105,#10107,.T.);+#10105 = VERTEX_POINT('',#10106);+#10106 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.5000001));+#10107 = SURFACE_CURVE('',#10108,(#10112,#10119),.PCURVE_S1.);+#10108 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10109,#10110,#10111),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10109 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.5000001+ ));+#10110 = CARTESIAN_POINT('',(0.336726888021,4.78515625E-02,1.5000001));+#10111 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.5000001));+#10112 = PCURVE('',#10020,#10113);+#10113 = DEFINITIONAL_REPRESENTATION('',(#10114),#10118);+#10114 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10115,#10116,#10117),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10115 = CARTESIAN_POINT('',(0.107552083333,0.149365234375));+#10116 = CARTESIAN_POINT('',(0.126009114583,0.128629557292));+#10117 = CARTESIAN_POINT('',(0.126009114583,8.487955729167E-02));+#10118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10119 = PCURVE('',#7204,#10120);+#10120 = DEFINITIONAL_REPRESENTATION('',(#10121),#10125);+#10121 = LINE('',#10122,#10123);+#10122 = CARTESIAN_POINT('',(0.,-0.1));+#10123 = VECTOR('',#10124,1.);+#10124 = DIRECTION('',(1.,0.));+#10125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10126 = ORIENTED_EDGE('',*,*,#10127,.T.);+#10127 = EDGE_CURVE('',#10105,#10128,#10130,.T.);+#10128 = VERTEX_POINT('',#10129);+#10129 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,+ 1.5000001));+#10130 = SURFACE_CURVE('',#10131,(#10135,#10142),.PCURVE_S1.);+#10131 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10132,#10133,#10134),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10132 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.5000001));+#10133 = CARTESIAN_POINT('',(0.336726888021,-3.942057291667E-02,+ 1.5000001));+#10134 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,+ 1.5000001));+#10135 = PCURVE('',#10020,#10136);+#10136 = DEFINITIONAL_REPRESENTATION('',(#10137),#10141);+#10137 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10138,#10139,#10140),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10138 = CARTESIAN_POINT('',(0.126009114583,8.487955729167E-02));+#10139 = CARTESIAN_POINT('',(0.126009114583,4.1357421875E-02));+#10140 = CARTESIAN_POINT('',(0.107552083333,2.06787109375E-02));+#10141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10142 = PCURVE('',#7240,#10143);+#10143 = DEFINITIONAL_REPRESENTATION('',(#10144),#10148);+#10144 = LINE('',#10145,#10146);+#10145 = CARTESIAN_POINT('',(0.,-0.1));+#10146 = VECTOR('',#10147,1.);+#10147 = DIRECTION('',(1.,0.));+#10148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10149 = ORIENTED_EDGE('',*,*,#10150,.T.);+#10150 = EDGE_CURVE('',#10128,#9982,#10151,.T.);+#10151 = SURFACE_CURVE('',#10152,(#10156,#10163),.PCURVE_S1.);+#10152 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10153,#10154,#10155),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10153 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,+ 1.5000001));+#10154 = CARTESIAN_POINT('',(0.299812825521,-8.077799479167E-02,+ 1.5000001));+#10155 = CARTESIAN_POINT('',(0.260847981771,-8.077799479167E-02,+ 1.5000001));+#10156 = PCURVE('',#10020,#10157);+#10157 = DEFINITIONAL_REPRESENTATION('',(#10158),#10162);+#10158 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10159,#10160,#10161),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10159 = CARTESIAN_POINT('',(0.107552083333,2.06787109375E-02));+#10160 = CARTESIAN_POINT('',(8.909505208333E-02,0.));+#10161 = CARTESIAN_POINT('',(5.013020833333E-02,0.));+#10162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10163 = PCURVE('',#7276,#10164);+#10164 = DEFINITIONAL_REPRESENTATION('',(#10165),#10169);+#10165 = LINE('',#10166,#10167);+#10166 = CARTESIAN_POINT('',(0.,-0.1));+#10167 = VECTOR('',#10168,1.);+#10168 = DIRECTION('',(1.,0.));+#10169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10170 = ORIENTED_EDGE('',*,*,#10004,.T.);+#10171 = ORIENTED_EDGE('',*,*,#10172,.T.);+#10172 = EDGE_CURVE('',#10005,#10057,#10173,.T.);+#10173 = SURFACE_CURVE('',#10174,(#10178,#10185),.PCURVE_S1.);+#10174 = LINE('',#10175,#10176);+#10175 = CARTESIAN_POINT('',(0.226326497396,-8.077799479167E-02,+ 1.5000001));+#10176 = VECTOR('',#10177,1.);+#10177 = DIRECTION('',(0.,1.,0.));+#10178 = PCURVE('',#10020,#10179);+#10179 = DEFINITIONAL_REPRESENTATION('',(#10180),#10184);+#10180 = LINE('',#10181,#10182);+#10181 = CARTESIAN_POINT('',(1.560872395833E-02,0.));+#10182 = VECTOR('',#10183,1.);+#10183 = DIRECTION('',(0.,1.));+#10184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10185 = PCURVE('',#7110,#10186);+#10186 = DEFINITIONAL_REPRESENTATION('',(#10187),#10191);+#10187 = LINE('',#10188,#10189);+#10188 = CARTESIAN_POINT('',(0.,-0.1));+#10189 = VECTOR('',#10190,1.);+#10190 = DIRECTION('',(1.,0.));+#10191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10192 = FACE_BOUND('',#10193,.F.);+#10193 = EDGE_LOOP('',(#10194,#10224,#10254,#10284,#10314,#10344,#10372)+ );+#10194 = ORIENTED_EDGE('',*,*,#10195,.T.);+#10195 = EDGE_CURVE('',#10196,#10198,#10200,.T.);+#10196 = VERTEX_POINT('',#10197);+#10197 = CARTESIAN_POINT('',(0.249454752604,-6.1865234375E-02,1.5000001)+ );+#10198 = VERTEX_POINT('',#10199);+#10199 = CARTESIAN_POINT('',(0.260392252604,-6.1865234375E-02,1.5000001)+ );+#10200 = SURFACE_CURVE('',#10201,(#10205,#10212),.PCURVE_S1.);+#10201 = LINE('',#10202,#10203);+#10202 = CARTESIAN_POINT('',(0.249454752604,-6.1865234375E-02,1.5000001)+ );+#10203 = VECTOR('',#10204,1.);+#10204 = DIRECTION('',(1.,0.,0.));+#10205 = PCURVE('',#10020,#10206);+#10206 = DEFINITIONAL_REPRESENTATION('',(#10207),#10211);+#10207 = LINE('',#10208,#10209);+#10208 = CARTESIAN_POINT('',(3.873697916667E-02,1.891276041667E-02));+#10209 = VECTOR('',#10210,1.);+#10210 = DIRECTION('',(1.,0.));+#10211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10212 = PCURVE('',#10213,#10218);+#10213 = PLANE('',#10214);+#10214 = AXIS2_PLACEMENT_3D('',#10215,#10216,#10217);+#10215 = CARTESIAN_POINT('',(0.249454752604,-6.1865234375E-02,1.6000001)+ );+#10216 = DIRECTION('',(0.,-1.,0.));+#10217 = DIRECTION('',(1.,0.,0.));+#10218 = DEFINITIONAL_REPRESENTATION('',(#10219),#10223);+#10219 = LINE('',#10220,#10221);+#10220 = CARTESIAN_POINT('',(0.,-0.1));+#10221 = VECTOR('',#10222,1.);+#10222 = DIRECTION('',(1.,0.));+#10223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10224 = ORIENTED_EDGE('',*,*,#10225,.T.);+#10225 = EDGE_CURVE('',#10198,#10226,#10228,.T.);+#10226 = VERTEX_POINT('',#10227);+#10227 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,+ 1.5000001));+#10228 = SURFACE_CURVE('',#10229,(#10233,#10240),.PCURVE_S1.);+#10229 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10230,#10231,#10232),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10230 = CARTESIAN_POINT('',(0.260392252604,-6.1865234375E-02,1.5000001)+ );+#10231 = CARTESIAN_POINT('',(0.289444986979,-6.1865234375E-02,1.5000001)+ );+#10232 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,+ 1.5000001));+#10233 = PCURVE('',#10020,#10234);+#10234 = DEFINITIONAL_REPRESENTATION('',(#10235),#10239);+#10235 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10236,#10237,#10238),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10236 = CARTESIAN_POINT('',(4.967447916667E-02,1.891276041667E-02));+#10237 = CARTESIAN_POINT('',(7.872721354167E-02,1.891276041667E-02));+#10238 = CARTESIAN_POINT('',(9.0234375E-02,3.321126302083E-02));+#10239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10240 = PCURVE('',#10241,#10248);+#10241 = SURFACE_OF_LINEAR_EXTRUSION('',#10242,#10246);+#10242 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10243,#10244,#10245),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10243 = CARTESIAN_POINT('',(0.260392252604,-6.1865234375E-02,1.6000001)+ );+#10244 = CARTESIAN_POINT('',(0.289444986979,-6.1865234375E-02,1.6000001)+ );+#10245 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,+ 1.6000001));+#10246 = VECTOR('',#10247,1.);+#10247 = DIRECTION('',(0.,0.,1.));+#10248 = DEFINITIONAL_REPRESENTATION('',(#10249),#10253);+#10249 = LINE('',#10250,#10251);+#10250 = CARTESIAN_POINT('',(0.,-0.1));+#10251 = VECTOR('',#10252,1.);+#10252 = DIRECTION('',(1.,0.));+#10253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10254 = ORIENTED_EDGE('',*,*,#10255,.T.);+#10255 = EDGE_CURVE('',#10226,#10256,#10258,.T.);+#10256 = VERTEX_POINT('',#10257);+#10257 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.5000001));+#10258 = SURFACE_CURVE('',#10259,(#10263,#10270),.PCURVE_S1.);+#10259 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10260,#10261,#10262),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10260 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,+ 1.5000001));+#10261 = CARTESIAN_POINT('',(0.312459309896,-3.326822916667E-02,+ 1.5000001));+#10262 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.5000001));+#10263 = PCURVE('',#10020,#10264);+#10264 = DEFINITIONAL_REPRESENTATION('',(#10265),#10269);+#10265 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10266,#10267,#10268),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10266 = CARTESIAN_POINT('',(9.0234375E-02,3.321126302083E-02));+#10267 = CARTESIAN_POINT('',(0.101741536458,4.7509765625E-02));+#10268 = CARTESIAN_POINT('',(0.101741536458,8.487955729167E-02));+#10269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10270 = PCURVE('',#10271,#10278);+#10271 = SURFACE_OF_LINEAR_EXTRUSION('',#10272,#10276);+#10272 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10273,#10274,#10275),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10273 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,+ 1.6000001));+#10274 = CARTESIAN_POINT('',(0.312459309896,-3.326822916667E-02,+ 1.6000001));+#10275 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.6000001));+#10276 = VECTOR('',#10277,1.);+#10277 = DIRECTION('',(0.,0.,1.));+#10278 = DEFINITIONAL_REPRESENTATION('',(#10279),#10283);+#10279 = LINE('',#10280,#10281);+#10280 = CARTESIAN_POINT('',(0.,-0.1));+#10281 = VECTOR('',#10282,1.);+#10282 = DIRECTION('',(1.,0.));+#10283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10284 = ORIENTED_EDGE('',*,*,#10285,.T.);+#10285 = EDGE_CURVE('',#10256,#10286,#10288,.T.);+#10286 = VERTEX_POINT('',#10287);+#10287 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.5000001+ ));+#10288 = SURFACE_CURVE('',#10289,(#10293,#10300),.PCURVE_S1.);+#10289 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10290,#10291,#10292),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10290 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.5000001));+#10291 = CARTESIAN_POINT('',(0.312459309896,4.181315104167E-02,1.5000001+ ));+#10292 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.5000001+ ));+#10293 = PCURVE('',#10020,#10294);+#10294 = DEFINITIONAL_REPRESENTATION('',(#10295),#10299);+#10295 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10296,#10297,#10298),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10296 = CARTESIAN_POINT('',(0.101741536458,8.487955729167E-02));+#10297 = CARTESIAN_POINT('',(0.101741536458,0.122591145833));+#10298 = CARTESIAN_POINT('',(9.029134114583E-02,0.136889648438));+#10299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10300 = PCURVE('',#10301,#10308);+#10301 = SURFACE_OF_LINEAR_EXTRUSION('',#10302,#10306);+#10302 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10303,#10304,#10305),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10303 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.6000001));+#10304 = CARTESIAN_POINT('',(0.312459309896,4.181315104167E-02,1.6000001+ ));+#10305 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.6000001+ ));+#10306 = VECTOR('',#10307,1.);+#10307 = DIRECTION('',(0.,0.,1.));+#10308 = DEFINITIONAL_REPRESENTATION('',(#10309),#10313);+#10309 = LINE('',#10310,#10311);+#10310 = CARTESIAN_POINT('',(0.,-0.1));+#10311 = VECTOR('',#10312,1.);+#10312 = DIRECTION('',(1.,0.));+#10313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10314 = ORIENTED_EDGE('',*,*,#10315,.T.);+#10315 = EDGE_CURVE('',#10286,#10316,#10318,.T.);+#10316 = VERTEX_POINT('',#10317);+#10317 = CARTESIAN_POINT('',(0.260392252604,7.041015625E-02,1.5000001));+#10318 = SURFACE_CURVE('',#10319,(#10323,#10330),.PCURVE_S1.);+#10319 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10320,#10321,#10322),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10320 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.5000001+ ));+#10321 = CARTESIAN_POINT('',(0.289558919271,7.041015625E-02,1.5000001));+#10322 = CARTESIAN_POINT('',(0.260392252604,7.041015625E-02,1.5000001));+#10323 = PCURVE('',#10020,#10324);+#10324 = DEFINITIONAL_REPRESENTATION('',(#10325),#10329);+#10325 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10326,#10327,#10328),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10326 = CARTESIAN_POINT('',(9.029134114583E-02,0.136889648438));+#10327 = CARTESIAN_POINT('',(7.884114583333E-02,0.151188151042));+#10328 = CARTESIAN_POINT('',(4.967447916667E-02,0.151188151042));+#10329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10330 = PCURVE('',#10331,#10338);+#10331 = SURFACE_OF_LINEAR_EXTRUSION('',#10332,#10336);+#10332 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10333,#10334,#10335),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10333 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.6000001+ ));+#10334 = CARTESIAN_POINT('',(0.289558919271,7.041015625E-02,1.6000001));+#10335 = CARTESIAN_POINT('',(0.260392252604,7.041015625E-02,1.6000001));+#10336 = VECTOR('',#10337,1.);+#10337 = DIRECTION('',(0.,0.,1.));+#10338 = DEFINITIONAL_REPRESENTATION('',(#10339),#10343);+#10339 = LINE('',#10340,#10341);+#10340 = CARTESIAN_POINT('',(0.,-0.1));+#10341 = VECTOR('',#10342,1.);+#10342 = DIRECTION('',(1.,0.));+#10343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10344 = ORIENTED_EDGE('',*,*,#10345,.T.);+#10345 = EDGE_CURVE('',#10316,#10346,#10348,.T.);+#10346 = VERTEX_POINT('',#10347);+#10347 = CARTESIAN_POINT('',(0.249454752604,7.041015625E-02,1.5000001));+#10348 = SURFACE_CURVE('',#10349,(#10353,#10360),.PCURVE_S1.);+#10349 = LINE('',#10350,#10351);+#10350 = CARTESIAN_POINT('',(0.260392252604,7.041015625E-02,1.5000001));+#10351 = VECTOR('',#10352,1.);+#10352 = DIRECTION('',(-1.,0.,0.));+#10353 = PCURVE('',#10020,#10354);+#10354 = DEFINITIONAL_REPRESENTATION('',(#10355),#10359);+#10355 = LINE('',#10356,#10357);+#10356 = CARTESIAN_POINT('',(4.967447916667E-02,0.151188151042));+#10357 = VECTOR('',#10358,1.);+#10358 = DIRECTION('',(-1.,0.));+#10359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10360 = PCURVE('',#10361,#10366);+#10361 = PLANE('',#10362);+#10362 = AXIS2_PLACEMENT_3D('',#10363,#10364,#10365);+#10363 = CARTESIAN_POINT('',(0.260392252604,7.041015625E-02,1.6000001));+#10364 = DIRECTION('',(0.,1.,0.));+#10365 = DIRECTION('',(-1.,0.,0.));+#10366 = DEFINITIONAL_REPRESENTATION('',(#10367),#10371);+#10367 = LINE('',#10368,#10369);+#10368 = CARTESIAN_POINT('',(0.,-0.1));+#10369 = VECTOR('',#10370,1.);+#10370 = DIRECTION('',(1.,0.));+#10371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10372 = ORIENTED_EDGE('',*,*,#10373,.T.);+#10373 = EDGE_CURVE('',#10346,#10196,#10374,.T.);+#10374 = SURFACE_CURVE('',#10375,(#10379,#10386),.PCURVE_S1.);+#10375 = LINE('',#10376,#10377);+#10376 = CARTESIAN_POINT('',(0.249454752604,7.041015625E-02,1.5000001));+#10377 = VECTOR('',#10378,1.);+#10378 = DIRECTION('',(0.,-1.,0.));+#10379 = PCURVE('',#10020,#10380);+#10380 = DEFINITIONAL_REPRESENTATION('',(#10381),#10385);+#10381 = LINE('',#10382,#10383);+#10382 = CARTESIAN_POINT('',(3.873697916667E-02,0.151188151042));+#10383 = VECTOR('',#10384,1.);+#10384 = DIRECTION('',(0.,-1.));+#10385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10386 = PCURVE('',#10387,#10392);+#10387 = PLANE('',#10388);+#10388 = AXIS2_PLACEMENT_3D('',#10389,#10390,#10391);+#10389 = CARTESIAN_POINT('',(0.249454752604,7.041015625E-02,1.6000001));+#10390 = DIRECTION('',(-1.,0.,0.));+#10391 = DIRECTION('',(0.,-1.,0.));+#10392 = DEFINITIONAL_REPRESENTATION('',(#10393),#10397);+#10393 = LINE('',#10394,#10395);+#10394 = CARTESIAN_POINT('',(0.,-0.1));+#10395 = VECTOR('',#10396,1.);+#10396 = DIRECTION('',(1.,0.));+#10397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10398 = ADVANCED_FACE('',(#10399),#10387,.T.);+#10399 = FACE_BOUND('',#10400,.T.);+#10400 = EDGE_LOOP('',(#10401,#10429,#10450,#10451));+#10401 = ORIENTED_EDGE('',*,*,#10402,.F.);+#10402 = EDGE_CURVE('',#10403,#10405,#10407,.T.);+#10403 = VERTEX_POINT('',#10404);+#10404 = CARTESIAN_POINT('',(0.249454752604,7.041015625E-02,1.55));+#10405 = VERTEX_POINT('',#10406);+#10406 = CARTESIAN_POINT('',(0.249454752604,-6.1865234375E-02,1.55));+#10407 = SURFACE_CURVE('',#10408,(#10412,#10418),.PCURVE_S1.);+#10408 = LINE('',#10409,#10410);+#10409 = CARTESIAN_POINT('',(0.249454752604,0.702029306847,1.55));+#10410 = VECTOR('',#10411,1.);+#10411 = DIRECTION('',(0.,-1.,0.));+#10412 = PCURVE('',#10387,#10413);+#10413 = DEFINITIONAL_REPRESENTATION('',(#10414),#10417);+#10414 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10415,#10416),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.631619150596,0.763894541222),+ .PIECEWISE_BEZIER_KNOTS.);+#10415 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10416 = CARTESIAN_POINT('',(0.132275390625,-5.00001E-02));+#10417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10418 = PCURVE('',#10419,#10424);+#10419 = PLANE('',#10420);+#10420 = AXIS2_PLACEMENT_3D('',#10421,#10422,#10423);+#10421 = CARTESIAN_POINT('',(-0.646824228722,1.333648457443,1.55));+#10422 = DIRECTION('',(0.,0.,1.));+#10423 = DIRECTION('',(0.436386464522,-0.899759330922,0.));+#10424 = DEFINITIONAL_REPRESENTATION('',(#10425),#10428);+#10425 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10426,#10427),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.631619150596,0.763894541222),+ .PIECEWISE_BEZIER_KNOTS.);+#10426 = CARTESIAN_POINT('',(1.527734464563,0.255175280451));+#10427 = CARTESIAN_POINT('',(1.64675048153,0.197452090393));+#10428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10429 = ORIENTED_EDGE('',*,*,#10430,.T.);+#10430 = EDGE_CURVE('',#10403,#10346,#10431,.T.);+#10431 = SURFACE_CURVE('',#10432,(#10436,#10443),.PCURVE_S1.);+#10432 = LINE('',#10433,#10434);+#10433 = CARTESIAN_POINT('',(0.249454752604,7.041015625E-02,1.6000001));+#10434 = VECTOR('',#10435,1.);+#10435 = DIRECTION('',(-0.,-0.,-1.));+#10436 = PCURVE('',#10387,#10437);+#10437 = DEFINITIONAL_REPRESENTATION('',(#10438),#10442);+#10438 = LINE('',#10439,#10440);+#10439 = CARTESIAN_POINT('',(0.,0.));+#10440 = VECTOR('',#10441,1.);+#10441 = DIRECTION('',(0.,-1.));+#10442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10443 = PCURVE('',#10361,#10444);+#10444 = DEFINITIONAL_REPRESENTATION('',(#10445),#10449);+#10445 = LINE('',#10446,#10447);+#10446 = CARTESIAN_POINT('',(1.09375E-02,0.));+#10447 = VECTOR('',#10448,1.);+#10448 = DIRECTION('',(0.,-1.));+#10449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10450 = ORIENTED_EDGE('',*,*,#10373,.T.);+#10451 = ORIENTED_EDGE('',*,*,#10452,.F.);+#10452 = EDGE_CURVE('',#10405,#10196,#10453,.T.);+#10453 = SURFACE_CURVE('',#10454,(#10458,#10465),.PCURVE_S1.);+#10454 = LINE('',#10455,#10456);+#10455 = CARTESIAN_POINT('',(0.249454752604,-6.1865234375E-02,1.6000001)+ );+#10456 = VECTOR('',#10457,1.);+#10457 = DIRECTION('',(-0.,-0.,-1.));+#10458 = PCURVE('',#10387,#10459);+#10459 = DEFINITIONAL_REPRESENTATION('',(#10460),#10464);+#10460 = LINE('',#10461,#10462);+#10461 = CARTESIAN_POINT('',(0.132275390625,0.));+#10462 = VECTOR('',#10463,1.);+#10463 = DIRECTION('',(0.,-1.));+#10464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10465 = PCURVE('',#10213,#10466);+#10466 = DEFINITIONAL_REPRESENTATION('',(#10467),#10471);+#10467 = LINE('',#10468,#10469);+#10468 = CARTESIAN_POINT('',(0.,0.));+#10469 = VECTOR('',#10470,1.);+#10470 = DIRECTION('',(0.,-1.));+#10471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10472 = ADVANCED_FACE('',(#10473),#10419,.T.);+#10473 = FACE_BOUND('',#10474,.T.);+#10474 = EDGE_LOOP('',(#10475,#10476,#10497,#10526,#10555,#10584,#10613)+ );+#10475 = ORIENTED_EDGE('',*,*,#10402,.T.);+#10476 = ORIENTED_EDGE('',*,*,#10477,.T.);+#10477 = EDGE_CURVE('',#10405,#10478,#10480,.T.);+#10478 = VERTEX_POINT('',#10479);+#10479 = CARTESIAN_POINT('',(0.260392252604,-6.1865234375E-02,1.55));+#10480 = SURFACE_CURVE('',#10481,(#10485,#10491),.PCURVE_S1.);+#10481 = LINE('',#10482,#10483);+#10482 = CARTESIAN_POINT('',(-0.198684738059,-6.1865234375E-02,1.55));+#10483 = VECTOR('',#10484,1.);+#10484 = DIRECTION('',(1.,0.,-0.));+#10485 = PCURVE('',#10419,#10486);+#10486 = DEFINITIONAL_REPRESENTATION('',(#10487),#10490);+#10487 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10488,#10489),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.448139490663,0.459076990663),+ .PIECEWISE_BEZIER_KNOTS.);+#10488 = CARTESIAN_POINT('',(1.64675048153,0.197452090393));+#10489 = CARTESIAN_POINT('',(1.651523458485,0.207293208075));+#10490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10491 = PCURVE('',#10213,#10492);+#10492 = DEFINITIONAL_REPRESENTATION('',(#10493),#10496);+#10493 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10494,#10495),.UNSPECIFIED.,+ .F.,.F.,(2,2),(0.448139490663,0.459076990663),+ .PIECEWISE_BEZIER_KNOTS.);+#10494 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10495 = CARTESIAN_POINT('',(1.09375E-02,-5.00001E-02));+#10496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10497 = ORIENTED_EDGE('',*,*,#10498,.F.);+#10498 = EDGE_CURVE('',#10499,#10478,#10501,.T.);+#10499 = VERTEX_POINT('',#10500);+#10500 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,1.55));+#10501 = SURFACE_CURVE('',#10502,(#10508,#10517),.PCURVE_S1.);+#10502 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10503,#10504,#10505,#10506,+ #10507),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10503 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,1.55));+#10504 = CARTESIAN_POINT('',(0.295196635405,-5.471838410367E-02,1.55));+#10505 = CARTESIAN_POINT('',(0.286514871279,-5.948537457781E-02,1.55));+#10506 = CARTESIAN_POINT('',(0.274908800037,-6.1865234375E-02,1.55));+#10507 = CARTESIAN_POINT('',(0.260392252604,-6.1865234375E-02,1.55));+#10508 = PCURVE('',#10419,#10509);+#10509 = DEFINITIONAL_REPRESENTATION('',(#10510),#10516);+#10510 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10511,#10512,#10513,#10514,+ #10515),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10511 = CARTESIAN_POINT('',(1.656358036893,0.250027025812));+#10512 = CARTESIAN_POINT('',(1.660281174827,0.241727564979));+#10513 = CARTESIAN_POINT('',(1.660781714634,0.231835816579));+#10514 = CARTESIAN_POINT('',(1.657858283297,0.22035460708));+#10515 = CARTESIAN_POINT('',(1.651523458485,0.207293208075));+#10516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10517 = PCURVE('',#10241,#10518);+#10518 = DEFINITIONAL_REPRESENTATION('',(#10519),#10525);+#10519 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10520,#10521,#10522,#10523,+ #10524),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10520 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10521 = CARTESIAN_POINT('',(0.749916039084,-5.00001E-02));+#10522 = CARTESIAN_POINT('',(0.499831175033,-5.00001E-02));+#10523 = CARTESIAN_POINT('',(0.249831001194,-5.00001E-02));+#10524 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10526 = ORIENTED_EDGE('',*,*,#10527,.F.);+#10527 = EDGE_CURVE('',#10528,#10499,#10530,.T.);+#10528 = VERTEX_POINT('',#10529);+#10529 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.55));+#10530 = SURFACE_CURVE('',#10531,(#10537,#10546),.PCURVE_S1.);+#10531 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10532,#10533,#10534,#10535,+ #10536),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10532 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.55));+#10533 = CARTESIAN_POINT('',(0.312459309896,-1.455950714352E-02,1.55));+#10534 = CARTESIAN_POINT('',(0.310546344515,-2.940648882651E-02,1.55));+#10535 = CARTESIAN_POINT('',(0.306710541144,-4.041150122902E-02,1.55));+#10536 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,1.55));+#10537 = PCURVE('',#10419,#10538);+#10538 = DEFINITIONAL_REPRESENTATION('',(#10539),#10545);+#10539 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10540,#10541,#10542,#10543,+ #10544),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10540 = CARTESIAN_POINT('',(1.614890576516,0.282928045971));+#10541 = CARTESIAN_POINT('',(1.631681048052,0.274784607765));+#10542 = CARTESIAN_POINT('',(1.644204966158,0.266584377469));+#10543 = CARTESIAN_POINT('',(1.652432936083,0.25833063914));+#10544 = CARTESIAN_POINT('',(1.656358036893,0.250027025812));+#10545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10546 = PCURVE('',#10271,#10547);+#10547 = DEFINITIONAL_REPRESENTATION('',(#10548),#10554);+#10548 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10549,#10550,#10551,#10552,+ #10553),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10549 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10550 = CARTESIAN_POINT('',(0.750318789439,-5.00001E-02));+#10551 = CARTESIAN_POINT('',(0.500352416374,-5.00001E-02));+#10552 = CARTESIAN_POINT('',(0.25020908622,-5.00001E-02));+#10553 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10555 = ORIENTED_EDGE('',*,*,#10556,.F.);+#10556 = EDGE_CURVE('',#10557,#10528,#10559,.T.);+#10557 = VERTEX_POINT('',#10558);+#10558 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.55));+#10559 = SURFACE_CURVE('',#10560,(#10566,#10575),.PCURVE_S1.);+#10560 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10561,#10562,#10563,#10564,+ #10565),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10561 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.55));+#10562 = CARTESIAN_POINT('',(0.306739126658,4.895626543299E-02,1.55));+#10563 = CARTESIAN_POINT('',(0.310555935318,3.789391987257E-02,1.55));+#10564 = CARTESIAN_POINT('',(0.312459309896,2.293271730113E-02,1.55));+#10565 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.55));+#10566 = PCURVE('',#10419,#10567);+#10567 = DEFINITIONAL_REPRESENTATION('',(#10568),#10574);+#10568 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10569,#10570,#10571,#10572,+ #10573),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10569 = CARTESIAN_POINT('',(1.563097301454,0.295322125692));+#10570 = CARTESIAN_POINT('',(1.572035928476,0.297355242958));+#10571 = CARTESIAN_POINT('',(1.583654980753,0.295961994296));+#10572 = CARTESIAN_POINT('',(1.597947069271,0.291145707038));+#10573 = CARTESIAN_POINT('',(1.614890576516,0.282928045971));+#10574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10575 = PCURVE('',#10301,#10576);+#10576 = DEFINITIONAL_REPRESENTATION('',(#10577),#10583);+#10577 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10578,#10579,#10580,#10581,+ #10582),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10578 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10579 = CARTESIAN_POINT('',(0.749785400229,-5.00001E-02));+#10580 = CARTESIAN_POINT('',(0.499638621883,-5.00001E-02));+#10581 = CARTESIAN_POINT('',(0.249673317001,-5.00001E-02));+#10582 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10584 = ORIENTED_EDGE('',*,*,#10585,.F.);+#10585 = EDGE_CURVE('',#10586,#10557,#10588,.T.);+#10586 = VERTEX_POINT('',#10587);+#10587 = CARTESIAN_POINT('',(0.260392252604,7.041015625E-02,1.55));+#10588 = SURFACE_CURVE('',#10589,(#10595,#10604),.PCURVE_S1.);+#10589 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10590,#10591,#10592,#10593,+ #10594),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10590 = CARTESIAN_POINT('',(0.260392252604,7.041015625E-02,1.55));+#10591 = CARTESIAN_POINT('',(0.274965583198,7.041015625E-02,1.55));+#10592 = CARTESIAN_POINT('',(0.286600224949,6.803034372715E-02,1.55));+#10593 = CARTESIAN_POINT('',(0.295282060288,6.326334831327E-02,1.55));+#10594 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.55));+#10595 = PCURVE('',#10419,#10596);+#10596 = DEFINITIONAL_REPRESENTATION('',(#10597),#10603);+#10597 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10598,#10599,#10600,#10601,+ #10602),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10598 = CARTESIAN_POINT('',(1.532507441519,0.265016398133));+#10599 = CARTESIAN_POINT('',(1.538867045733,0.278128888317));+#10600 = CARTESIAN_POINT('',(1.546085504436,0.287558747822));+#10601 = CARTESIAN_POINT('',(1.554163288469,0.293290057903));+#10602 = CARTESIAN_POINT('',(1.563097301454,0.295322125692));+#10603 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10604 = PCURVE('',#10331,#10605);+#10605 = DEFINITIONAL_REPRESENTATION('',(#10606),#10612);+#10606 = B_SPLINE_CURVE_WITH_KNOTS('',4,(#10607,#10608,#10609,#10610,+ #10611),.UNSPECIFIED.,.F.,.F.,(5,5),(0.,1.),+ .PIECEWISE_BEZIER_KNOTS.);+#10607 = CARTESIAN_POINT('',(1.,-5.00001E-02));+#10608 = CARTESIAN_POINT('',(0.750171475539,-5.00001E-02));+#10609 = CARTESIAN_POINT('',(0.500171468202,-5.00001E-02));+#10610 = CARTESIAN_POINT('',(0.250085441302,-5.00001E-02));+#10611 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10613 = ORIENTED_EDGE('',*,*,#10614,.T.);+#10614 = EDGE_CURVE('',#10586,#10403,#10615,.T.);+#10615 = SURFACE_CURVE('',#10616,(#10620,#10626),.PCURVE_S1.);+#10616 = LINE('',#10617,#10618);+#10617 = CARTESIAN_POINT('',(-0.193215988059,7.041015625E-02,1.55));+#10618 = VECTOR('',#10619,1.);+#10619 = DIRECTION('',(-1.,0.,0.));+#10620 = PCURVE('',#10419,#10621);+#10621 = DEFINITIONAL_REPRESENTATION('',(#10622),#10625);+#10622 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10623,#10624),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.453608240663,-0.442670740663),+ .PIECEWISE_BEZIER_KNOTS.);+#10623 = CARTESIAN_POINT('',(1.532507441519,0.265016398133));+#10624 = CARTESIAN_POINT('',(1.527734464563,0.255175280451));+#10625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10626 = PCURVE('',#10361,#10627);+#10627 = DEFINITIONAL_REPRESENTATION('',(#10628),#10631);+#10628 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10629,#10630),.UNSPECIFIED.,+ .F.,.F.,(2,2),(-0.453608240663,-0.442670740663),+ .PIECEWISE_BEZIER_KNOTS.);+#10629 = CARTESIAN_POINT('',(0.,-5.00001E-02));+#10630 = CARTESIAN_POINT('',(1.09375E-02,-5.00001E-02));+#10631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10632 = ADVANCED_FACE('',(#10633),#10361,.T.);+#10633 = FACE_BOUND('',#10634,.T.);+#10634 = EDGE_LOOP('',(#10635,#10636,#10657,#10658));+#10635 = ORIENTED_EDGE('',*,*,#10614,.F.);+#10636 = ORIENTED_EDGE('',*,*,#10637,.T.);+#10637 = EDGE_CURVE('',#10586,#10316,#10638,.T.);+#10638 = SURFACE_CURVE('',#10639,(#10643,#10650),.PCURVE_S1.);+#10639 = LINE('',#10640,#10641);+#10640 = CARTESIAN_POINT('',(0.260392252604,7.041015625E-02,1.6000001));+#10641 = VECTOR('',#10642,1.);+#10642 = DIRECTION('',(-0.,-0.,-1.));+#10643 = PCURVE('',#10361,#10644);+#10644 = DEFINITIONAL_REPRESENTATION('',(#10645),#10649);+#10645 = LINE('',#10646,#10647);+#10646 = CARTESIAN_POINT('',(0.,0.));+#10647 = VECTOR('',#10648,1.);+#10648 = DIRECTION('',(0.,-1.));+#10649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10650 = PCURVE('',#10331,#10651);+#10651 = DEFINITIONAL_REPRESENTATION('',(#10652),#10656);+#10652 = LINE('',#10653,#10654);+#10653 = CARTESIAN_POINT('',(1.,0.));+#10654 = VECTOR('',#10655,1.);+#10655 = DIRECTION('',(0.,-1.));+#10656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10657 = ORIENTED_EDGE('',*,*,#10345,.T.);+#10658 = ORIENTED_EDGE('',*,*,#10430,.F.);+#10659 = ADVANCED_FACE('',(#10660),#10331,.T.);+#10660 = FACE_BOUND('',#10661,.T.);+#10661 = EDGE_LOOP('',(#10662,#10663,#10684,#10685));+#10662 = ORIENTED_EDGE('',*,*,#10585,.T.);+#10663 = ORIENTED_EDGE('',*,*,#10664,.T.);+#10664 = EDGE_CURVE('',#10557,#10286,#10665,.T.);+#10665 = SURFACE_CURVE('',#10666,(#10670,#10677),.PCURVE_S1.);+#10666 = LINE('',#10667,#10668);+#10667 = CARTESIAN_POINT('',(0.301009114583,5.611165364583E-02,1.6000001+ ));+#10668 = VECTOR('',#10669,1.);+#10669 = DIRECTION('',(-0.,-0.,-1.));+#10670 = PCURVE('',#10331,#10671);+#10671 = DEFINITIONAL_REPRESENTATION('',(#10672),#10676);+#10672 = LINE('',#10673,#10674);+#10673 = CARTESIAN_POINT('',(0.,0.));+#10674 = VECTOR('',#10675,1.);+#10675 = DIRECTION('',(0.,-1.));+#10676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10677 = PCURVE('',#10301,#10678);+#10678 = DEFINITIONAL_REPRESENTATION('',(#10679),#10683);+#10679 = LINE('',#10680,#10681);+#10680 = CARTESIAN_POINT('',(1.,0.));+#10681 = VECTOR('',#10682,1.);+#10682 = DIRECTION('',(0.,-1.));+#10683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10684 = ORIENTED_EDGE('',*,*,#10315,.T.);+#10685 = ORIENTED_EDGE('',*,*,#10637,.F.);+#10686 = ADVANCED_FACE('',(#10687),#10301,.T.);+#10687 = FACE_BOUND('',#10688,.T.);+#10688 = EDGE_LOOP('',(#10689,#10690,#10711,#10712));+#10689 = ORIENTED_EDGE('',*,*,#10556,.T.);+#10690 = ORIENTED_EDGE('',*,*,#10691,.T.);+#10691 = EDGE_CURVE('',#10528,#10256,#10692,.T.);+#10692 = SURFACE_CURVE('',#10693,(#10697,#10704),.PCURVE_S1.);+#10693 = LINE('',#10694,#10695);+#10694 = CARTESIAN_POINT('',(0.312459309896,4.1015625E-03,1.6000001));+#10695 = VECTOR('',#10696,1.);+#10696 = DIRECTION('',(-0.,-0.,-1.));+#10697 = PCURVE('',#10301,#10698);+#10698 = DEFINITIONAL_REPRESENTATION('',(#10699),#10703);+#10699 = LINE('',#10700,#10701);+#10700 = CARTESIAN_POINT('',(0.,0.));+#10701 = VECTOR('',#10702,1.);+#10702 = DIRECTION('',(0.,-1.));+#10703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10704 = PCURVE('',#10271,#10705);+#10705 = DEFINITIONAL_REPRESENTATION('',(#10706),#10710);+#10706 = LINE('',#10707,#10708);+#10707 = CARTESIAN_POINT('',(1.,0.));+#10708 = VECTOR('',#10709,1.);+#10709 = DIRECTION('',(0.,-1.));+#10710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10711 = ORIENTED_EDGE('',*,*,#10285,.T.);+#10712 = ORIENTED_EDGE('',*,*,#10664,.F.);+#10713 = ADVANCED_FACE('',(#10714),#10271,.T.);+#10714 = FACE_BOUND('',#10715,.T.);+#10715 = EDGE_LOOP('',(#10716,#10717,#10738,#10739));+#10716 = ORIENTED_EDGE('',*,*,#10527,.T.);+#10717 = ORIENTED_EDGE('',*,*,#10718,.T.);+#10718 = EDGE_CURVE('',#10499,#10226,#10719,.T.);+#10719 = SURFACE_CURVE('',#10720,(#10724,#10731),.PCURVE_S1.);+#10720 = LINE('',#10721,#10722);+#10721 = CARTESIAN_POINT('',(0.300952148438,-4.756673177083E-02,+ 1.6000001));+#10722 = VECTOR('',#10723,1.);+#10723 = DIRECTION('',(-0.,-0.,-1.));+#10724 = PCURVE('',#10271,#10725);+#10725 = DEFINITIONAL_REPRESENTATION('',(#10726),#10730);+#10726 = LINE('',#10727,#10728);+#10727 = CARTESIAN_POINT('',(0.,0.));+#10728 = VECTOR('',#10729,1.);+#10729 = DIRECTION('',(0.,-1.));+#10730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10731 = PCURVE('',#10241,#10732);+#10732 = DEFINITIONAL_REPRESENTATION('',(#10733),#10737);+#10733 = LINE('',#10734,#10735);+#10734 = CARTESIAN_POINT('',(1.,0.));+#10735 = VECTOR('',#10736,1.);+#10736 = DIRECTION('',(0.,-1.));+#10737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10738 = ORIENTED_EDGE('',*,*,#10255,.T.);+#10739 = ORIENTED_EDGE('',*,*,#10691,.F.);+#10740 = ADVANCED_FACE('',(#10741),#10241,.T.);+#10741 = FACE_BOUND('',#10742,.T.);+#10742 = EDGE_LOOP('',(#10743,#10744,#10765,#10766));+#10743 = ORIENTED_EDGE('',*,*,#10498,.T.);+#10744 = ORIENTED_EDGE('',*,*,#10745,.T.);+#10745 = EDGE_CURVE('',#10478,#10198,#10746,.T.);+#10746 = SURFACE_CURVE('',#10747,(#10751,#10758),.PCURVE_S1.);+#10747 = LINE('',#10748,#10749);+#10748 = CARTESIAN_POINT('',(0.260392252604,-6.1865234375E-02,1.6000001)+ );+#10749 = VECTOR('',#10750,1.);+#10750 = DIRECTION('',(-0.,-0.,-1.));+#10751 = PCURVE('',#10241,#10752);+#10752 = DEFINITIONAL_REPRESENTATION('',(#10753),#10757);+#10753 = LINE('',#10754,#10755);+#10754 = CARTESIAN_POINT('',(0.,0.));+#10755 = VECTOR('',#10756,1.);+#10756 = DIRECTION('',(0.,-1.));+#10757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10758 = PCURVE('',#10213,#10759);+#10759 = DEFINITIONAL_REPRESENTATION('',(#10760),#10764);+#10760 = LINE('',#10761,#10762);+#10761 = CARTESIAN_POINT('',(1.09375E-02,0.));+#10762 = VECTOR('',#10763,1.);+#10763 = DIRECTION('',(0.,-1.));+#10764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10765 = ORIENTED_EDGE('',*,*,#10225,.T.);+#10766 = ORIENTED_EDGE('',*,*,#10718,.F.);+#10767 = ADVANCED_FACE('',(#10768),#10213,.T.);+#10768 = FACE_BOUND('',#10769,.T.);+#10769 = EDGE_LOOP('',(#10770,#10771,#10772,#10773));+#10770 = ORIENTED_EDGE('',*,*,#10477,.F.);+#10771 = ORIENTED_EDGE('',*,*,#10452,.T.);+#10772 = ORIENTED_EDGE('',*,*,#10195,.T.);+#10773 = ORIENTED_EDGE('',*,*,#10745,.F.);+#10774 = ADVANCED_FACE('',(#10775),#7276,.T.);+#10775 = FACE_BOUND('',#10776,.T.);+#10776 = EDGE_LOOP('',(#10777,#10778,#10799,#10800));+#10777 = ORIENTED_EDGE('',*,*,#7256,.T.);+#10778 = ORIENTED_EDGE('',*,*,#10779,.T.);+#10779 = EDGE_CURVE('',#7221,#10128,#10780,.T.);+#10780 = SURFACE_CURVE('',#10781,(#10785,#10792),.PCURVE_S1.);+#10781 = LINE('',#10782,#10783);+#10782 = CARTESIAN_POINT('',(0.318269856771,-6.009928385417E-02,+ 1.6000001));+#10783 = VECTOR('',#10784,1.);+#10784 = DIRECTION('',(-0.,-0.,-1.));+#10785 = PCURVE('',#7276,#10786);+#10786 = DEFINITIONAL_REPRESENTATION('',(#10787),#10791);+#10787 = LINE('',#10788,#10789);+#10788 = CARTESIAN_POINT('',(0.,0.));+#10789 = VECTOR('',#10790,1.);+#10790 = DIRECTION('',(0.,-1.));+#10791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10792 = PCURVE('',#7240,#10793);+#10793 = DEFINITIONAL_REPRESENTATION('',(#10794),#10798);+#10794 = LINE('',#10795,#10796);+#10795 = CARTESIAN_POINT('',(1.,0.));+#10796 = VECTOR('',#10797,1.);+#10797 = DIRECTION('',(0.,-1.));+#10798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10799 = ORIENTED_EDGE('',*,*,#10150,.T.);+#10800 = ORIENTED_EDGE('',*,*,#9981,.F.);+#10801 = ADVANCED_FACE('',(#10802),#7240,.T.);+#10802 = FACE_BOUND('',#10803,.T.);+#10803 = EDGE_LOOP('',(#10804,#10805,#10826,#10827));+#10804 = ORIENTED_EDGE('',*,*,#7220,.T.);+#10805 = ORIENTED_EDGE('',*,*,#10806,.T.);+#10806 = EDGE_CURVE('',#7185,#10105,#10807,.T.);+#10807 = SURFACE_CURVE('',#10808,(#10812,#10819),.PCURVE_S1.);+#10808 = LINE('',#10809,#10810);+#10809 = CARTESIAN_POINT('',(0.336726888021,4.1015625E-03,1.6000001));+#10810 = VECTOR('',#10811,1.);+#10811 = DIRECTION('',(-0.,-0.,-1.));+#10812 = PCURVE('',#7240,#10813);+#10813 = DEFINITIONAL_REPRESENTATION('',(#10814),#10818);+#10814 = LINE('',#10815,#10816);+#10815 = CARTESIAN_POINT('',(0.,0.));+#10816 = VECTOR('',#10817,1.);+#10817 = DIRECTION('',(0.,-1.));+#10818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10819 = PCURVE('',#7204,#10820);+#10820 = DEFINITIONAL_REPRESENTATION('',(#10821),#10825);+#10821 = LINE('',#10822,#10823);+#10822 = CARTESIAN_POINT('',(1.,0.));+#10823 = VECTOR('',#10824,1.);+#10824 = DIRECTION('',(0.,-1.));+#10825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10826 = ORIENTED_EDGE('',*,*,#10127,.T.);+#10827 = ORIENTED_EDGE('',*,*,#10779,.F.);+#10828 = ADVANCED_FACE('',(#10829),#7204,.T.);+#10829 = FACE_BOUND('',#10830,.T.);+#10830 = EDGE_LOOP('',(#10831,#10832,#10853,#10854));+#10831 = ORIENTED_EDGE('',*,*,#7184,.T.);+#10832 = ORIENTED_EDGE('',*,*,#10833,.T.);+#10833 = EDGE_CURVE('',#7149,#10082,#10834,.T.);+#10834 = SURFACE_CURVE('',#10835,(#10839,#10846),.PCURVE_S1.);+#10835 = LINE('',#10836,#10837);+#10836 = CARTESIAN_POINT('',(0.318269856771,6.858723958333E-02,1.6000001+ ));+#10837 = VECTOR('',#10838,1.);+#10838 = DIRECTION('',(-0.,-0.,-1.));+#10839 = PCURVE('',#7204,#10840);+#10840 = DEFINITIONAL_REPRESENTATION('',(#10841),#10845);+#10841 = LINE('',#10842,#10843);+#10842 = CARTESIAN_POINT('',(0.,0.));+#10843 = VECTOR('',#10844,1.);+#10844 = DIRECTION('',(0.,-1.));+#10845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10846 = PCURVE('',#7168,#10847);+#10847 = DEFINITIONAL_REPRESENTATION('',(#10848),#10852);+#10848 = LINE('',#10849,#10850);+#10849 = CARTESIAN_POINT('',(1.,0.));+#10850 = VECTOR('',#10851,1.);+#10851 = DIRECTION('',(0.,-1.));+#10852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10853 = ORIENTED_EDGE('',*,*,#10104,.T.);+#10854 = ORIENTED_EDGE('',*,*,#10806,.F.);+#10855 = ADVANCED_FACE('',(#10856),#7168,.T.);+#10856 = FACE_BOUND('',#10857,.T.);+#10857 = EDGE_LOOP('',(#10858,#10859,#10880,#10881));+#10858 = ORIENTED_EDGE('',*,*,#7148,.T.);+#10859 = ORIENTED_EDGE('',*,*,#10860,.T.);+#10860 = EDGE_CURVE('',#7122,#10059,#10861,.T.);+#10861 = SURFACE_CURVE('',#10862,(#10866,#10873),.PCURVE_S1.);+#10862 = LINE('',#10863,#10864);+#10863 = CARTESIAN_POINT('',(0.260847981771,8.932291666667E-02,1.6000001+ ));+#10864 = VECTOR('',#10865,1.);+#10865 = DIRECTION('',(-0.,-0.,-1.));+#10866 = PCURVE('',#7168,#10867);+#10867 = DEFINITIONAL_REPRESENTATION('',(#10868),#10872);+#10868 = LINE('',#10869,#10870);+#10869 = CARTESIAN_POINT('',(0.,0.));+#10870 = VECTOR('',#10871,1.);+#10871 = DIRECTION('',(0.,-1.));+#10872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10873 = PCURVE('',#7137,#10874);+#10874 = DEFINITIONAL_REPRESENTATION('',(#10875),#10879);+#10875 = LINE('',#10876,#10877);+#10876 = CARTESIAN_POINT('',(3.4521484375E-02,0.));+#10877 = VECTOR('',#10878,1.);+#10878 = DIRECTION('',(0.,-1.));+#10879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10880 = ORIENTED_EDGE('',*,*,#10081,.T.);+#10881 = ORIENTED_EDGE('',*,*,#10833,.F.);+#10882 = ADVANCED_FACE('',(#10883),#7137,.T.);+#10883 = FACE_BOUND('',#10884,.T.);+#10884 = EDGE_LOOP('',(#10885,#10886,#10907,#10908));+#10885 = ORIENTED_EDGE('',*,*,#7121,.F.);+#10886 = ORIENTED_EDGE('',*,*,#10887,.T.);+#10887 = EDGE_CURVE('',#7095,#10057,#10888,.T.);+#10888 = SURFACE_CURVE('',#10889,(#10893,#10900),.PCURVE_S1.);+#10889 = LINE('',#10890,#10891);+#10890 = CARTESIAN_POINT('',(0.226326497396,8.932291666667E-02,1.6000001+ ));+#10891 = VECTOR('',#10892,1.);+#10892 = DIRECTION('',(-0.,-0.,-1.));+#10893 = PCURVE('',#7137,#10894);+#10894 = DEFINITIONAL_REPRESENTATION('',(#10895),#10899);+#10895 = LINE('',#10896,#10897);+#10896 = CARTESIAN_POINT('',(0.,0.));+#10897 = VECTOR('',#10898,1.);+#10898 = DIRECTION('',(0.,-1.));+#10899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10900 = PCURVE('',#7110,#10901);+#10901 = DEFINITIONAL_REPRESENTATION('',(#10902),#10906);+#10902 = LINE('',#10903,#10904);+#10903 = CARTESIAN_POINT('',(0.170100911458,0.));+#10904 = VECTOR('',#10905,1.);+#10905 = DIRECTION('',(0.,-1.));+#10906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10907 = ORIENTED_EDGE('',*,*,#10056,.T.);+#10908 = ORIENTED_EDGE('',*,*,#10860,.F.);+#10909 = ADVANCED_FACE('',(#10910),#7110,.T.);+#10910 = FACE_BOUND('',#10911,.T.);+#10911 = EDGE_LOOP('',(#10912,#10913,#10914,#10915));+#10912 = ORIENTED_EDGE('',*,*,#7092,.F.);+#10913 = ORIENTED_EDGE('',*,*,#10032,.T.);+#10914 = ORIENTED_EDGE('',*,*,#10172,.T.);+#10915 = ORIENTED_EDGE('',*,*,#10887,.F.);+#10916 = ADVANCED_FACE('',(#10917),#7074,.T.);+#10917 = FACE_BOUND('',#10918,.T.);+#10918 = EDGE_LOOP('',(#10919,#10920,#10943,#10971));+#10919 = ORIENTED_EDGE('',*,*,#7056,.T.);+#10920 = ORIENTED_EDGE('',*,*,#10921,.T.);+#10921 = EDGE_CURVE('',#7021,#10922,#10924,.T.);+#10922 = VERTEX_POINT('',#10923);+#10923 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.5000001+ ));+#10924 = SURFACE_CURVE('',#10925,(#10929,#10936),.PCURVE_S1.);+#10925 = LINE('',#10926,#10927);+#10926 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.6000001+ ));+#10927 = VECTOR('',#10928,1.);+#10928 = DIRECTION('',(-0.,-0.,-1.));+#10929 = PCURVE('',#7074,#10930);+#10930 = DEFINITIONAL_REPRESENTATION('',(#10931),#10935);+#10931 = LINE('',#10932,#10933);+#10932 = CARTESIAN_POINT('',(0.,0.));+#10933 = VECTOR('',#10934,1.);+#10934 = DIRECTION('',(0.,-1.));+#10935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10936 = PCURVE('',#7040,#10937);+#10937 = DEFINITIONAL_REPRESENTATION('',(#10938),#10942);+#10938 = LINE('',#10939,#10940);+#10939 = CARTESIAN_POINT('',(1.,0.));+#10940 = VECTOR('',#10941,1.);+#10941 = DIRECTION('',(0.,-1.));+#10942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10943 = ORIENTED_EDGE('',*,*,#10944,.T.);+#10944 = EDGE_CURVE('',#10922,#10945,#10947,.T.);+#10945 = VERTEX_POINT('',#10946);+#10946 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.5000001));+#10947 = SURFACE_CURVE('',#10948,(#10952,#10959),.PCURVE_S1.);+#10948 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10949,#10950,#10951),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10949 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.5000001+ ));+#10950 = CARTESIAN_POINT('',(0.173575846354,1.412760416667E-02,1.5000001+ ));+#10951 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.5000001));+#10952 = PCURVE('',#7074,#10953);+#10953 = DEFINITIONAL_REPRESENTATION('',(#10954),#10958);+#10954 = LINE('',#10955,#10956);+#10955 = CARTESIAN_POINT('',(0.,-0.1));+#10956 = VECTOR('',#10957,1.);+#10957 = DIRECTION('',(1.,0.));+#10958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10959 = PCURVE('',#10960,#10965);+#10960 = PLANE('',#10961);+#10961 = AXIS2_PLACEMENT_3D('',#10962,#10963,#10964);+#10962 = CARTESIAN_POINT('',(7.02392578125E-02,-8.077799479167E-02,+ 1.5000001));+#10963 = DIRECTION('',(0.,0.,1.));+#10964 = DIRECTION('',(1.,0.,0.));+#10965 = DEFINITIONAL_REPRESENTATION('',(#10966),#10970);+#10966 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#10967,#10968,#10969),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10967 = CARTESIAN_POINT('',(0.111140950521,0.104248046875));+#10968 = CARTESIAN_POINT('',(0.103336588542,9.490559895833E-02));+#10969 = CARTESIAN_POINT('',(8.841145833333E-02,9.103190104167E-02));+#10970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10971 = ORIENTED_EDGE('',*,*,#10972,.F.);+#10972 = EDGE_CURVE('',#6076,#10945,#10973,.T.);+#10973 = SURFACE_CURVE('',#10974,(#10978,#10985),.PCURVE_S1.);+#10974 = LINE('',#10975,#10976);+#10975 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.6000001));+#10976 = VECTOR('',#10977,1.);+#10977 = DIRECTION('',(-0.,-0.,-1.));+#10978 = PCURVE('',#7074,#10979);+#10979 = DEFINITIONAL_REPRESENTATION('',(#10980),#10984);+#10980 = LINE('',#10981,#10982);+#10981 = CARTESIAN_POINT('',(1.,0.));+#10982 = VECTOR('',#10983,1.);+#10983 = DIRECTION('',(0.,-1.));+#10984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10985 = PCURVE('',#6095,#10986);+#10986 = DEFINITIONAL_REPRESENTATION('',(#10987),#10991);+#10987 = LINE('',#10988,#10989);+#10988 = CARTESIAN_POINT('',(0.,0.));+#10989 = VECTOR('',#10990,1.);+#10990 = DIRECTION('',(0.,-1.));+#10991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#10992 = ADVANCED_FACE('',(#10993),#10960,.T.);+#10993 = FACE_BOUND('',#10994,.F.);+#10994 = EDGE_LOOP('',(#10995,#11018,#11041,#11064,#11087,#11110,#11133,+ #11156,#11179,#11202,#11225,#11248,#11271,#11294,#11317,#11340,+ #11363,#11386,#11409,#11432,#11455,#11478,#11501,#11524,#11547,+ #11570,#11593,#11616,#11637));+#10995 = ORIENTED_EDGE('',*,*,#10996,.T.);+#10996 = EDGE_CURVE('',#10945,#10997,#10999,.T.);+#10997 = VERTEX_POINT('',#10998);+#10998 = CARTESIAN_POINT('',(0.184285481771,-5.525716145833E-03,+ 1.5000001));+#10999 = SURFACE_CURVE('',#11000,(#11004,#11011),.PCURVE_S1.);+#11000 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11001,#11002,#11003),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11001 = CARTESIAN_POINT('',(0.158650716146,1.025390625E-02,1.5000001));+#11002 = CARTESIAN_POINT('',(0.175398763021,5.810546875E-03,1.5000001));+#11003 = CARTESIAN_POINT('',(0.184285481771,-5.525716145833E-03,+ 1.5000001));+#11004 = PCURVE('',#10960,#11005);+#11005 = DEFINITIONAL_REPRESENTATION('',(#11006),#11010);+#11006 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11007,#11008,#11009),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11007 = CARTESIAN_POINT('',(8.841145833333E-02,9.103190104167E-02));+#11008 = CARTESIAN_POINT('',(0.105159505208,8.658854166667E-02));+#11009 = CARTESIAN_POINT('',(0.114046223958,7.525227864583E-02));+#11010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11011 = PCURVE('',#6095,#11012);+#11012 = DEFINITIONAL_REPRESENTATION('',(#11013),#11017);+#11013 = LINE('',#11014,#11015);+#11014 = CARTESIAN_POINT('',(0.,-0.1));+#11015 = VECTOR('',#11016,1.);+#11016 = DIRECTION('',(1.,0.));+#11017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11018 = ORIENTED_EDGE('',*,*,#11019,.T.);+#11019 = EDGE_CURVE('',#10997,#11020,#11022,.T.);+#11020 = VERTEX_POINT('',#11021);+#11021 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.5000001)+ );+#11022 = SURFACE_CURVE('',#11023,(#11027,#11034),.PCURVE_S1.);+#11023 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11024,#11025,#11026),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11024 = CARTESIAN_POINT('',(0.184285481771,-5.525716145833E-03,+ 1.5000001));+#11025 = CARTESIAN_POINT('',(0.193172200521,-1.686197916667E-02,+ 1.5000001));+#11026 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.5000001)+ );+#11027 = PCURVE('',#10960,#11028);+#11028 = DEFINITIONAL_REPRESENTATION('',(#11029),#11033);+#11029 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11030,#11031,#11032),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11030 = CARTESIAN_POINT('',(0.114046223958,7.525227864583E-02));+#11031 = CARTESIAN_POINT('',(0.122932942708,6.3916015625E-02));+#11032 = CARTESIAN_POINT('',(0.122932942708,4.694010416667E-02));+#11033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11034 = PCURVE('',#6131,#11035);+#11035 = DEFINITIONAL_REPRESENTATION('',(#11036),#11040);+#11036 = LINE('',#11037,#11038);+#11037 = CARTESIAN_POINT('',(0.,-0.1));+#11038 = VECTOR('',#11039,1.);+#11039 = DIRECTION('',(1.,0.));+#11040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11041 = ORIENTED_EDGE('',*,*,#11042,.T.);+#11042 = EDGE_CURVE('',#11020,#11043,#11045,.T.);+#11043 = VERTEX_POINT('',#11044);+#11044 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,+ 1.5000001));+#11045 = SURFACE_CURVE('',#11046,(#11050,#11057),.PCURVE_S1.);+#11046 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11047,#11048,#11049),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11047 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.5000001)+ );+#11048 = CARTESIAN_POINT('',(0.193172200521,-5.730794270833E-02,+ 1.5000001));+#11049 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,+ 1.5000001));+#11050 = PCURVE('',#10960,#11051);+#11051 = DEFINITIONAL_REPRESENTATION('',(#11052),#11056);+#11052 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11053,#11054,#11055),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11053 = CARTESIAN_POINT('',(0.122932942708,4.694010416667E-02));+#11054 = CARTESIAN_POINT('',(0.122932942708,2.347005208333E-02));+#11055 = CARTESIAN_POINT('',(0.107153320313,1.00830078125E-02));+#11056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11057 = PCURVE('',#6167,#11058);+#11058 = DEFINITIONAL_REPRESENTATION('',(#11059),#11063);+#11059 = LINE('',#11060,#11061);+#11060 = CARTESIAN_POINT('',(0.,-0.1));+#11061 = VECTOR('',#11062,1.);+#11062 = DIRECTION('',(1.,0.));+#11063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11064 = ORIENTED_EDGE('',*,*,#11065,.T.);+#11065 = EDGE_CURVE('',#11043,#11066,#11068,.T.);+#11066 = VERTEX_POINT('',#11067);+#11067 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.5000001)+ );+#11068 = SURFACE_CURVE('',#11069,(#11073,#11080),.PCURVE_S1.);+#11069 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11070,#11071,#11072),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11070 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,+ 1.5000001));+#11071 = CARTESIAN_POINT('',(0.161612955729,-8.408203125E-02,1.5000001)+ );+#11072 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.5000001)+ );+#11073 = PCURVE('',#10960,#11074);+#11074 = DEFINITIONAL_REPRESENTATION('',(#11075),#11079);+#11075 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11076,#11077,#11078),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11076 = CARTESIAN_POINT('',(0.107153320313,1.00830078125E-02));+#11077 = CARTESIAN_POINT('',(9.137369791667E-02,-3.304036458333E-03));+#11078 = CARTESIAN_POINT('',(6.346028645833E-02,-3.304036458333E-03));+#11079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11080 = PCURVE('',#6203,#11081);+#11081 = DEFINITIONAL_REPRESENTATION('',(#11082),#11086);+#11082 = LINE('',#11083,#11084);+#11083 = CARTESIAN_POINT('',(0.,-0.1));+#11084 = VECTOR('',#11085,1.);+#11085 = DIRECTION('',(1.,0.));+#11086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11087 = ORIENTED_EDGE('',*,*,#11088,.T.);+#11088 = EDGE_CURVE('',#11066,#11089,#11091,.T.);+#11089 = VERTEX_POINT('',#11090);+#11090 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,+ 1.5000001));+#11091 = SURFACE_CURVE('',#11092,(#11096,#11103),.PCURVE_S1.);+#11092 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11093,#11094,#11095),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11093 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.5000001)+ );+#11094 = CARTESIAN_POINT('',(0.121964518229,-8.408203125E-02,1.5000001)+ );+#11095 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,+ 1.5000001));+#11096 = PCURVE('',#10960,#11097);+#11097 = DEFINITIONAL_REPRESENTATION('',(#11098),#11102);+#11098 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11099,#11100,#11101),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11099 = CARTESIAN_POINT('',(6.346028645833E-02,-3.304036458333E-03));+#11100 = CARTESIAN_POINT('',(5.172526041667E-02,-3.304036458333E-03));+#11101 = CARTESIAN_POINT('',(3.953450520833E-02,-1.139322916667E-03));+#11102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11103 = PCURVE('',#6239,#11104);+#11104 = DEFINITIONAL_REPRESENTATION('',(#11105),#11109);+#11105 = LINE('',#11106,#11107);+#11106 = CARTESIAN_POINT('',(0.,-0.1));+#11107 = VECTOR('',#11108,1.);+#11108 = DIRECTION('',(1.,0.));+#11109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11110 = ORIENTED_EDGE('',*,*,#11111,.T.);+#11111 = EDGE_CURVE('',#11089,#11112,#11114,.T.);+#11112 = VERTEX_POINT('',#11113);+#11113 = CARTESIAN_POINT('',(8.584798177083E-02,-7.565104166667E-02,+ 1.5000001));+#11114 = SURFACE_CURVE('',#11115,(#11119,#11126),.PCURVE_S1.);+#11115 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11116,#11117,#11118),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11116 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,+ 1.5000001));+#11117 = CARTESIAN_POINT('',(9.75830078125E-02,-7.975260416667E-02,+ 1.5000001));+#11118 = CARTESIAN_POINT('',(8.584798177083E-02,-7.565104166667E-02,+ 1.5000001));+#11119 = PCURVE('',#10960,#11120);+#11120 = DEFINITIONAL_REPRESENTATION('',(#11121),#11125);+#11121 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11122,#11123,#11124),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11122 = CARTESIAN_POINT('',(3.953450520833E-02,-1.139322916667E-03));+#11123 = CARTESIAN_POINT('',(2.734375E-02,1.025390625E-03));+#11124 = CARTESIAN_POINT('',(1.560872395833E-02,5.126953125E-03));+#11125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11126 = PCURVE('',#6275,#11127);+#11127 = DEFINITIONAL_REPRESENTATION('',(#11128),#11132);+#11128 = LINE('',#11129,#11130);+#11129 = CARTESIAN_POINT('',(0.,-0.1));+#11130 = VECTOR('',#11131,1.);+#11131 = DIRECTION('',(1.,0.));+#11132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11133 = ORIENTED_EDGE('',*,*,#11134,.T.);+#11134 = EDGE_CURVE('',#11112,#11135,#11137,.T.);+#11135 = VERTEX_POINT('',#11136);+#11136 = CARTESIAN_POINT('',(8.584798177083E-02,-5.275065104167E-02,+ 1.5000001));+#11137 = SURFACE_CURVE('',#11138,(#11142,#11149),.PCURVE_S1.);+#11138 = LINE('',#11139,#11140);+#11139 = CARTESIAN_POINT('',(8.584798177083E-02,-7.565104166667E-02,+ 1.5000001));+#11140 = VECTOR('',#11141,1.);+#11141 = DIRECTION('',(0.,1.,0.));+#11142 = PCURVE('',#10960,#11143);+#11143 = DEFINITIONAL_REPRESENTATION('',(#11144),#11148);+#11144 = LINE('',#11145,#11146);+#11145 = CARTESIAN_POINT('',(1.560872395833E-02,5.126953125E-03));+#11146 = VECTOR('',#11147,1.);+#11147 = DIRECTION('',(0.,1.));+#11148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11149 = PCURVE('',#6307,#11150);+#11150 = DEFINITIONAL_REPRESENTATION('',(#11151),#11155);+#11151 = LINE('',#11152,#11153);+#11152 = CARTESIAN_POINT('',(0.,-0.1));+#11153 = VECTOR('',#11154,1.);+#11154 = DIRECTION('',(1.,0.));+#11155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11156 = ORIENTED_EDGE('',*,*,#11157,.T.);+#11157 = EDGE_CURVE('',#11135,#11158,#11160,.T.);+#11158 = VERTEX_POINT('',#11159);+#11159 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,+ 1.5000001));+#11160 = SURFACE_CURVE('',#11161,(#11165,#11172),.PCURVE_S1.);+#11161 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11162,#11163,#11164),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11162 = CARTESIAN_POINT('',(8.584798177083E-02,-5.275065104167E-02,+ 1.5000001));+#11163 = CARTESIAN_POINT('',(9.746907552083E-02,-5.87890625E-02,+ 1.5000001));+#11164 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,+ 1.5000001));+#11165 = PCURVE('',#10960,#11166);+#11166 = DEFINITIONAL_REPRESENTATION('',(#11167),#11171);+#11167 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11168,#11169,#11170),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11168 = CARTESIAN_POINT('',(1.560872395833E-02,2.802734375E-02));+#11169 = CARTESIAN_POINT('',(2.722981770833E-02,2.198893229167E-02));+#11170 = CARTESIAN_POINT('',(3.850911458333E-02,1.902669270833E-02));+#11171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11172 = PCURVE('',#6338,#11173);+#11173 = DEFINITIONAL_REPRESENTATION('',(#11174),#11178);+#11174 = LINE('',#11175,#11176);+#11175 = CARTESIAN_POINT('',(0.,-0.1));+#11176 = VECTOR('',#11177,1.);+#11177 = DIRECTION('',(1.,0.));+#11178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11179 = ORIENTED_EDGE('',*,*,#11180,.T.);+#11180 = EDGE_CURVE('',#11158,#11181,#11183,.T.);+#11181 = VERTEX_POINT('',#11182);+#11182 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,+ 1.5000001));+#11183 = SURFACE_CURVE('',#11184,(#11188,#11195),.PCURVE_S1.);+#11184 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11185,#11186,#11187),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11185 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,+ 1.5000001));+#11186 = CARTESIAN_POINT('',(0.120027669271,-6.471354166667E-02,+ 1.5000001));+#11187 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,+ 1.5000001));+#11188 = PCURVE('',#10960,#11189);+#11189 = DEFINITIONAL_REPRESENTATION('',(#11190),#11194);+#11190 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11191,#11192,#11193),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11191 = CARTESIAN_POINT('',(3.850911458333E-02,1.902669270833E-02));+#11192 = CARTESIAN_POINT('',(4.978841145833E-02,1.6064453125E-02));+#11193 = CARTESIAN_POINT('',(6.095377604167E-02,1.6064453125E-02));+#11194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11195 = PCURVE('',#6374,#11196);+#11196 = DEFINITIONAL_REPRESENTATION('',(#11197),#11201);+#11197 = LINE('',#11198,#11199);+#11198 = CARTESIAN_POINT('',(0.,-0.1));+#11199 = VECTOR('',#11200,1.);+#11200 = DIRECTION('',(1.,0.));+#11201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11202 = ORIENTED_EDGE('',*,*,#11203,.T.);+#11203 = EDGE_CURVE('',#11181,#11204,#11206,.T.);+#11204 = VERTEX_POINT('',#11205);+#11205 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,+ 1.5000001));+#11206 = SURFACE_CURVE('',#11207,(#11211,#11218),.PCURVE_S1.);+#11207 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11208,#11209,#11210),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11208 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,+ 1.5000001));+#11209 = CARTESIAN_POINT('',(0.150105794271,-6.471354166667E-02,+ 1.5000001));+#11210 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,+ 1.5000001));+#11211 = PCURVE('',#10960,#11212);+#11212 = DEFINITIONAL_REPRESENTATION('',(#11213),#11217);+#11213 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11214,#11215,#11216),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11214 = CARTESIAN_POINT('',(6.095377604167E-02,1.6064453125E-02));+#11215 = CARTESIAN_POINT('',(7.986653645833E-02,1.6064453125E-02));+#11216 = CARTESIAN_POINT('',(9.000651041667E-02,2.4609375E-02));+#11217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11218 = PCURVE('',#6410,#11219);+#11219 = DEFINITIONAL_REPRESENTATION('',(#11220),#11224);+#11220 = LINE('',#11221,#11222);+#11221 = CARTESIAN_POINT('',(0.,-0.1));+#11222 = VECTOR('',#11223,1.);+#11223 = DIRECTION('',(1.,0.));+#11224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11225 = ORIENTED_EDGE('',*,*,#11226,.T.);+#11226 = EDGE_CURVE('',#11204,#11227,#11229,.T.);+#11227 = VERTEX_POINT('',#11228);+#11228 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,+ 1.5000001));+#11229 = SURFACE_CURVE('',#11230,(#11234,#11241),.PCURVE_S1.);+#11230 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11231,#11232,#11233),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11231 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,+ 1.5000001));+#11232 = CARTESIAN_POINT('',(0.170385742188,-4.762369791667E-02,+ 1.5000001));+#11233 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,+ 1.5000001));+#11234 = PCURVE('',#10960,#11235);+#11235 = DEFINITIONAL_REPRESENTATION('',(#11236),#11240);+#11236 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11237,#11238,#11239),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11237 = CARTESIAN_POINT('',(9.000651041667E-02,2.4609375E-02));+#11238 = CARTESIAN_POINT('',(0.100146484375,3.3154296875E-02));+#11239 = CARTESIAN_POINT('',(0.100146484375,4.921875E-02));+#11240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11241 = PCURVE('',#6446,#11242);+#11242 = DEFINITIONAL_REPRESENTATION('',(#11243),#11247);+#11243 = LINE('',#11244,#11245);+#11244 = CARTESIAN_POINT('',(0.,-0.1));+#11245 = VECTOR('',#11246,1.);+#11246 = DIRECTION('',(1.,0.));+#11247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11248 = ORIENTED_EDGE('',*,*,#11249,.T.);+#11249 = EDGE_CURVE('',#11227,#11250,#11252,.T.);+#11250 = VERTEX_POINT('',#11251);+#11251 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.5000001)+ );+#11252 = SURFACE_CURVE('',#11253,(#11257,#11264),.PCURVE_S1.);+#11253 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11254,#11255,#11256),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11254 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,+ 1.5000001));+#11255 = CARTESIAN_POINT('',(0.170385742188,-1.6748046875E-02,1.5000001)+ );+#11256 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.5000001)+ );+#11257 = PCURVE('',#10960,#11258);+#11258 = DEFINITIONAL_REPRESENTATION('',(#11259),#11263);+#11259 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11260,#11261,#11262),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11260 = CARTESIAN_POINT('',(0.100146484375,4.921875E-02));+#11261 = CARTESIAN_POINT('',(0.100146484375,6.402994791667E-02));+#11262 = CARTESIAN_POINT('',(9.000651041667E-02,7.274576822917E-02));+#11263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11264 = PCURVE('',#6482,#11265);+#11265 = DEFINITIONAL_REPRESENTATION('',(#11266),#11270);+#11266 = LINE('',#11267,#11268);+#11267 = CARTESIAN_POINT('',(0.,-0.1));+#11268 = VECTOR('',#11269,1.);+#11269 = DIRECTION('',(1.,0.));+#11270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11271 = ORIENTED_EDGE('',*,*,#11272,.T.);+#11272 = EDGE_CURVE('',#11250,#11273,#11275,.T.);+#11273 = VERTEX_POINT('',#11274);+#11274 = CARTESIAN_POINT('',(0.132788085938,6.8359375E-04,1.5000001));+#11275 = SURFACE_CURVE('',#11276,(#11280,#11287),.PCURVE_S1.);+#11276 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11277,#11278,#11279),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11277 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.5000001)+ );+#11278 = CARTESIAN_POINT('',(0.150105794271,6.8359375E-04,1.5000001));+#11279 = CARTESIAN_POINT('',(0.132788085938,6.8359375E-04,1.5000001));+#11280 = PCURVE('',#10960,#11281);+#11281 = DEFINITIONAL_REPRESENTATION('',(#11282),#11286);+#11282 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11283,#11284,#11285),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11283 = CARTESIAN_POINT('',(9.000651041667E-02,7.274576822917E-02));+#11284 = CARTESIAN_POINT('',(7.986653645833E-02,8.146158854167E-02));+#11285 = CARTESIAN_POINT('',(6.2548828125E-02,8.146158854167E-02));+#11286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11287 = PCURVE('',#6518,#11288);+#11288 = DEFINITIONAL_REPRESENTATION('',(#11289),#11293);+#11289 = LINE('',#11290,#11291);+#11290 = CARTESIAN_POINT('',(0.,-0.1));+#11291 = VECTOR('',#11292,1.);+#11292 = DIRECTION('',(1.,0.));+#11293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11294 = ORIENTED_EDGE('',*,*,#11295,.T.);+#11295 = EDGE_CURVE('',#11273,#11296,#11298,.T.);+#11296 = VERTEX_POINT('',#11297);+#11297 = CARTESIAN_POINT('',(0.115242513021,6.8359375E-04,1.5000001));+#11298 = SURFACE_CURVE('',#11299,(#11303,#11310),.PCURVE_S1.);+#11299 = LINE('',#11300,#11301);+#11300 = CARTESIAN_POINT('',(0.132788085938,6.8359375E-04,1.5000001));+#11301 = VECTOR('',#11302,1.);+#11302 = DIRECTION('',(-1.,0.,0.));+#11303 = PCURVE('',#10960,#11304);+#11304 = DEFINITIONAL_REPRESENTATION('',(#11305),#11309);+#11305 = LINE('',#11306,#11307);+#11306 = CARTESIAN_POINT('',(6.2548828125E-02,8.146158854167E-02));+#11307 = VECTOR('',#11308,1.);+#11308 = DIRECTION('',(-1.,0.));+#11309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11310 = PCURVE('',#6550,#11311);+#11311 = DEFINITIONAL_REPRESENTATION('',(#11312),#11316);+#11312 = LINE('',#11313,#11314);+#11313 = CARTESIAN_POINT('',(0.,-0.1));+#11314 = VECTOR('',#11315,1.);+#11315 = DIRECTION('',(1.,0.));+#11316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11317 = ORIENTED_EDGE('',*,*,#11318,.T.);+#11318 = EDGE_CURVE('',#11296,#11319,#11321,.T.);+#11319 = VERTEX_POINT('',#11320);+#11320 = CARTESIAN_POINT('',(0.115242513021,1.959635416667E-02,1.5000001+ ));+#11321 = SURFACE_CURVE('',#11322,(#11326,#11333),.PCURVE_S1.);+#11322 = LINE('',#11323,#11324);+#11323 = CARTESIAN_POINT('',(0.115242513021,6.8359375E-04,1.5000001));+#11324 = VECTOR('',#11325,1.);+#11325 = DIRECTION('',(0.,1.,0.));+#11326 = PCURVE('',#10960,#11327);+#11327 = DEFINITIONAL_REPRESENTATION('',(#11328),#11332);+#11328 = LINE('',#11329,#11330);+#11329 = CARTESIAN_POINT('',(4.500325520833E-02,8.146158854167E-02));+#11330 = VECTOR('',#11331,1.);+#11331 = DIRECTION('',(0.,1.));+#11332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11333 = PCURVE('',#6577,#11334);+#11334 = DEFINITIONAL_REPRESENTATION('',(#11335),#11339);+#11335 = LINE('',#11336,#11337);+#11336 = CARTESIAN_POINT('',(0.,-0.1));+#11337 = VECTOR('',#11338,1.);+#11338 = DIRECTION('',(1.,0.));+#11339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11340 = ORIENTED_EDGE('',*,*,#11341,.T.);+#11341 = EDGE_CURVE('',#11319,#11342,#11344,.T.);+#11342 = VERTEX_POINT('',#11343);+#11343 = CARTESIAN_POINT('',(0.132788085938,1.959635416667E-02,1.5000001+ ));+#11344 = SURFACE_CURVE('',#11345,(#11349,#11356),.PCURVE_S1.);+#11345 = LINE('',#11346,#11347);+#11346 = CARTESIAN_POINT('',(0.115242513021,1.959635416667E-02,1.5000001+ ));+#11347 = VECTOR('',#11348,1.);+#11348 = DIRECTION('',(1.,0.,0.));+#11349 = PCURVE('',#10960,#11350);+#11350 = DEFINITIONAL_REPRESENTATION('',(#11351),#11355);+#11351 = LINE('',#11352,#11353);+#11352 = CARTESIAN_POINT('',(4.500325520833E-02,0.100374348958));+#11353 = VECTOR('',#11354,1.);+#11354 = DIRECTION('',(1.,0.));+#11355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11356 = PCURVE('',#6604,#11357);+#11357 = DEFINITIONAL_REPRESENTATION('',(#11358),#11362);+#11358 = LINE('',#11359,#11360);+#11359 = CARTESIAN_POINT('',(0.,-0.1));+#11360 = VECTOR('',#11361,1.);+#11361 = DIRECTION('',(1.,0.));+#11362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11363 = ORIENTED_EDGE('',*,*,#11364,.T.);+#11364 = EDGE_CURVE('',#11342,#11365,#11367,.T.);+#11365 = VERTEX_POINT('',#11366);+#11366 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.5000001+ ));+#11367 = SURFACE_CURVE('',#11368,(#11372,#11379),.PCURVE_S1.);+#11368 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11369,#11370,#11371),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11369 = CARTESIAN_POINT('',(0.132788085938,1.959635416667E-02,1.5000001+ ));+#11370 = CARTESIAN_POINT('',(0.148624674479,1.959635416667E-02,1.5000001+ ));+#11371 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.5000001+ ));+#11372 = PCURVE('',#10960,#11373);+#11373 = DEFINITIONAL_REPRESENTATION('',(#11374),#11378);+#11374 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11375,#11376,#11377),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11375 = CARTESIAN_POINT('',(6.2548828125E-02,0.100374348958));+#11376 = CARTESIAN_POINT('',(7.838541666667E-02,0.100374348958));+#11377 = CARTESIAN_POINT('',(8.727213541667E-02,0.10732421875));+#11378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11379 = PCURVE('',#6635,#11380);+#11380 = DEFINITIONAL_REPRESENTATION('',(#11381),#11385);+#11381 = LINE('',#11382,#11383);+#11382 = CARTESIAN_POINT('',(0.,-0.1));+#11383 = VECTOR('',#11384,1.);+#11384 = DIRECTION('',(1.,0.));+#11385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11386 = ORIENTED_EDGE('',*,*,#11387,.T.);+#11387 = EDGE_CURVE('',#11365,#11388,#11390,.T.);+#11388 = VERTEX_POINT('',#11389);+#11389 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.5000001+ ));+#11390 = SURFACE_CURVE('',#11391,(#11395,#11402),.PCURVE_S1.);+#11391 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11392,#11393,#11394),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11392 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.5000001+ ));+#11393 = CARTESIAN_POINT('',(0.166398111979,3.349609375E-02,1.5000001));+#11394 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.5000001+ ));+#11395 = PCURVE('',#10960,#11396);+#11396 = DEFINITIONAL_REPRESENTATION('',(#11397),#11401);+#11397 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11398,#11399,#11400),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11398 = CARTESIAN_POINT('',(8.727213541667E-02,0.10732421875));+#11399 = CARTESIAN_POINT('',(9.615885416667E-02,0.114274088542));+#11400 = CARTESIAN_POINT('',(9.615885416667E-02,0.126692708333));+#11401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11402 = PCURVE('',#6677,#11403);+#11403 = DEFINITIONAL_REPRESENTATION('',(#11404),#11408);+#11404 = LINE('',#11405,#11406);+#11405 = CARTESIAN_POINT('',(0.,-0.1));+#11406 = VECTOR('',#11407,1.);+#11407 = DIRECTION('',(1.,0.));+#11408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11409 = ORIENTED_EDGE('',*,*,#11410,.T.);+#11410 = EDGE_CURVE('',#11388,#11411,#11413,.T.);+#11411 = VERTEX_POINT('',#11412);+#11412 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.5000001+ ));+#11413 = SURFACE_CURVE('',#11414,(#11418,#11425),.PCURVE_S1.);+#11414 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11415,#11416,#11417),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11415 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.5000001+ ));+#11416 = CARTESIAN_POINT('',(0.166398111979,5.901692708333E-02,1.5000001+ ));+#11417 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.5000001+ ));+#11418 = PCURVE('',#10960,#11419);+#11419 = DEFINITIONAL_REPRESENTATION('',(#11420),#11424);+#11420 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11421,#11422,#11423),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11421 = CARTESIAN_POINT('',(9.615885416667E-02,0.126692708333));+#11422 = CARTESIAN_POINT('',(9.615885416667E-02,0.139794921875));+#11423 = CARTESIAN_POINT('',(8.789876302083E-02,0.146801757812));+#11424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11425 = PCURVE('',#6716,#11426);+#11426 = DEFINITIONAL_REPRESENTATION('',(#11427),#11431);+#11427 = LINE('',#11428,#11429);+#11428 = CARTESIAN_POINT('',(0.,-0.1));+#11429 = VECTOR('',#11430,1.);+#11430 = DIRECTION('',(1.,0.));+#11431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11432 = ORIENTED_EDGE('',*,*,#11433,.T.);+#11433 = EDGE_CURVE('',#11411,#11434,#11436,.T.);+#11434 = VERTEX_POINT('',#11435);+#11435 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.5000001+ ));+#11436 = SURFACE_CURVE('',#11437,(#11441,#11448),.PCURVE_S1.);+#11437 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11438,#11439,#11440),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11438 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.5000001+ ));+#11439 = CARTESIAN_POINT('',(0.149877929688,7.303059895833E-02,1.5000001+ ));+#11440 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.5000001+ ));+#11441 = PCURVE('',#10960,#11442);+#11442 = DEFINITIONAL_REPRESENTATION('',(#11443),#11447);+#11443 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11444,#11445,#11446),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11444 = CARTESIAN_POINT('',(8.789876302083E-02,0.146801757812));+#11445 = CARTESIAN_POINT('',(7.9638671875E-02,0.15380859375));+#11446 = CARTESIAN_POINT('',(6.437174479167E-02,0.15380859375));+#11447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11448 = PCURVE('',#6752,#11449);+#11449 = DEFINITIONAL_REPRESENTATION('',(#11450),#11454);+#11450 = LINE('',#11451,#11452);+#11451 = CARTESIAN_POINT('',(0.,-0.1));+#11452 = VECTOR('',#11453,1.);+#11453 = DIRECTION('',(1.,0.));+#11454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11455 = ORIENTED_EDGE('',*,*,#11456,.T.);+#11456 = EDGE_CURVE('',#11434,#11457,#11459,.T.);+#11457 = VERTEX_POINT('',#11458);+#11458 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.5000001)+ );+#11459 = SURFACE_CURVE('',#11460,(#11464,#11471),.PCURVE_S1.);+#11460 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11461,#11462,#11463),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11461 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.5000001+ ));+#11462 = CARTESIAN_POINT('',(0.124471028646,7.303059895833E-02,1.5000001+ ));+#11463 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.5000001)+ );+#11464 = PCURVE('',#10960,#11465);+#11465 = DEFINITIONAL_REPRESENTATION('',(#11466),#11470);+#11466 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11467,#11468,#11469),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11467 = CARTESIAN_POINT('',(6.437174479167E-02,0.15380859375));+#11468 = CARTESIAN_POINT('',(5.423177083333E-02,0.15380859375));+#11469 = CARTESIAN_POINT('',(4.3408203125E-02,0.151529947917));+#11470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11471 = PCURVE('',#6788,#11472);+#11472 = DEFINITIONAL_REPRESENTATION('',(#11473),#11477);+#11473 = LINE('',#11474,#11475);+#11474 = CARTESIAN_POINT('',(0.,-0.1));+#11475 = VECTOR('',#11476,1.);+#11476 = DIRECTION('',(1.,0.));+#11477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11478 = ORIENTED_EDGE('',*,*,#11479,.T.);+#11479 = EDGE_CURVE('',#11457,#11480,#11482,.T.);+#11480 = VERTEX_POINT('',#11481);+#11481 = CARTESIAN_POINT('',(9.097493489583E-02,6.3916015625E-02,+ 1.5000001));+#11482 = SURFACE_CURVE('',#11483,(#11487,#11494),.PCURVE_S1.);+#11483 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11484,#11485,#11486),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11484 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.5000001)+ );+#11485 = CARTESIAN_POINT('',(0.102823893229,6.847330729167E-02,1.5000001+ ));+#11486 = CARTESIAN_POINT('',(9.097493489583E-02,6.3916015625E-02,+ 1.5000001));+#11487 = PCURVE('',#10960,#11488);+#11488 = DEFINITIONAL_REPRESENTATION('',(#11489),#11493);+#11489 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11490,#11491,#11492),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11490 = CARTESIAN_POINT('',(4.3408203125E-02,0.151529947917));+#11491 = CARTESIAN_POINT('',(3.258463541667E-02,0.149251302083));+#11492 = CARTESIAN_POINT('',(2.073567708333E-02,0.144694010417));+#11493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11494 = PCURVE('',#6824,#11495);+#11495 = DEFINITIONAL_REPRESENTATION('',(#11496),#11500);+#11496 = LINE('',#11497,#11498);+#11497 = CARTESIAN_POINT('',(0.,-0.1));+#11498 = VECTOR('',#11499,1.);+#11499 = DIRECTION('',(1.,0.));+#11500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11501 = ORIENTED_EDGE('',*,*,#11502,.T.);+#11502 = EDGE_CURVE('',#11480,#11503,#11505,.T.);+#11503 = VERTEX_POINT('',#11504);+#11504 = CARTESIAN_POINT('',(9.097493489583E-02,8.5107421875E-02,+ 1.5000001));+#11505 = SURFACE_CURVE('',#11506,(#11510,#11517),.PCURVE_S1.);+#11506 = LINE('',#11507,#11508);+#11507 = CARTESIAN_POINT('',(9.097493489583E-02,6.3916015625E-02,+ 1.5000001));+#11508 = VECTOR('',#11509,1.);+#11509 = DIRECTION('',(0.,1.,0.));+#11510 = PCURVE('',#10960,#11511);+#11511 = DEFINITIONAL_REPRESENTATION('',(#11512),#11516);+#11512 = LINE('',#11513,#11514);+#11513 = CARTESIAN_POINT('',(2.073567708333E-02,0.144694010417));+#11514 = VECTOR('',#11515,1.);+#11515 = DIRECTION('',(0.,1.));+#11516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11517 = PCURVE('',#6856,#11518);+#11518 = DEFINITIONAL_REPRESENTATION('',(#11519),#11523);+#11519 = LINE('',#11520,#11521);+#11520 = CARTESIAN_POINT('',(0.,-0.1));+#11521 = VECTOR('',#11522,1.);+#11522 = DIRECTION('',(1.,0.));+#11523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11524 = ORIENTED_EDGE('',*,*,#11525,.T.);+#11525 = EDGE_CURVE('',#11503,#11526,#11528,.T.);+#11526 = VERTEX_POINT('',#11527);+#11527 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.5000001));+#11528 = SURFACE_CURVE('',#11529,(#11533,#11540),.PCURVE_S1.);+#11529 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11530,#11531,#11532),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11530 = CARTESIAN_POINT('',(9.097493489583E-02,8.5107421875E-02,+ 1.5000001));+#11531 = CARTESIAN_POINT('',(0.104760742188,8.875325520833E-02,1.5000001+ ));+#11532 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.5000001));+#11533 = PCURVE('',#10960,#11534);+#11534 = DEFINITIONAL_REPRESENTATION('',(#11535),#11539);+#11535 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11536,#11537,#11538),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11536 = CARTESIAN_POINT('',(2.073567708333E-02,0.165885416667));+#11537 = CARTESIAN_POINT('',(3.4521484375E-02,0.16953125));+#11538 = CARTESIAN_POINT('',(4.52880859375E-02,0.171354166667));+#11539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11540 = PCURVE('',#6887,#11541);+#11541 = DEFINITIONAL_REPRESENTATION('',(#11542),#11546);+#11542 = LINE('',#11543,#11544);+#11543 = CARTESIAN_POINT('',(0.,-0.1));+#11544 = VECTOR('',#11545,1.);+#11545 = DIRECTION('',(1.,0.));+#11546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11547 = ORIENTED_EDGE('',*,*,#11548,.T.);+#11548 = EDGE_CURVE('',#11526,#11549,#11551,.T.);+#11549 = VERTEX_POINT('',#11550);+#11550 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.5000001+ ));+#11551 = SURFACE_CURVE('',#11552,(#11556,#11563),.PCURVE_S1.);+#11552 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11553,#11554,#11555),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11553 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.5000001));+#11554 = CARTESIAN_POINT('',(0.126293945313,9.239908854167E-02,1.5000001+ ));+#11555 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.5000001+ ));+#11556 = PCURVE('',#10960,#11557);+#11557 = DEFINITIONAL_REPRESENTATION('',(#11558),#11562);+#11558 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11559,#11560,#11561),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11559 = CARTESIAN_POINT('',(4.52880859375E-02,0.171354166667));+#11560 = CARTESIAN_POINT('',(5.60546875E-02,0.173177083333));+#11561 = CARTESIAN_POINT('',(6.437174479167E-02,0.173177083333));+#11562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11563 = PCURVE('',#6923,#11564);+#11564 = DEFINITIONAL_REPRESENTATION('',(#11565),#11569);+#11565 = LINE('',#11566,#11567);+#11566 = CARTESIAN_POINT('',(0.,-0.1));+#11567 = VECTOR('',#11568,1.);+#11568 = DIRECTION('',(1.,0.));+#11569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11570 = ORIENTED_EDGE('',*,*,#11571,.T.);+#11571 = EDGE_CURVE('',#11549,#11572,#11574,.T.);+#11572 = VERTEX_POINT('',#11573);+#11573 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.5000001)+ );+#11574 = SURFACE_CURVE('',#11575,(#11579,#11586),.PCURVE_S1.);+#11575 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11576,#11577,#11578),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11576 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.5000001+ ));+#11577 = CARTESIAN_POINT('',(0.159448242188,9.239908854167E-02,1.5000001+ ));+#11578 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.5000001)+ );+#11579 = PCURVE('',#10960,#11580);+#11580 = DEFINITIONAL_REPRESENTATION('',(#11581),#11585);+#11581 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11582,#11583,#11584),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11582 = CARTESIAN_POINT('',(6.437174479167E-02,0.173177083333));+#11583 = CARTESIAN_POINT('',(8.9208984375E-02,0.173177083333));+#11584 = CARTESIAN_POINT('',(0.104077148438,0.160701497396));+#11585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11586 = PCURVE('',#6959,#11587);+#11587 = DEFINITIONAL_REPRESENTATION('',(#11588),#11592);+#11588 = LINE('',#11589,#11590);+#11589 = CARTESIAN_POINT('',(0.,-0.1));+#11590 = VECTOR('',#11591,1.);+#11591 = DIRECTION('',(1.,0.));+#11592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11593 = ORIENTED_EDGE('',*,*,#11594,.T.);+#11594 = EDGE_CURVE('',#11572,#11595,#11597,.T.);+#11595 = VERTEX_POINT('',#11596);+#11596 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.5000001)+ );+#11597 = SURFACE_CURVE('',#11598,(#11602,#11609),.PCURVE_S1.);+#11598 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11599,#11600,#11601),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11599 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.5000001)+ );+#11600 = CARTESIAN_POINT('',(0.189184570313,6.744791666667E-02,1.5000001+ ));+#11601 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.5000001)+ );+#11602 = PCURVE('',#10960,#11603);+#11603 = DEFINITIONAL_REPRESENTATION('',(#11604),#11608);+#11604 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11605,#11606,#11607),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11605 = CARTESIAN_POINT('',(0.104077148438,0.160701497396));+#11606 = CARTESIAN_POINT('',(0.1189453125,0.148225911458));+#11607 = CARTESIAN_POINT('',(0.1189453125,0.127604166667));+#11608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11609 = PCURVE('',#7001,#11610);+#11610 = DEFINITIONAL_REPRESENTATION('',(#11611),#11615);+#11611 = LINE('',#11612,#11613);+#11612 = CARTESIAN_POINT('',(0.,-0.1));+#11613 = VECTOR('',#11614,1.);+#11614 = DIRECTION('',(1.,0.));+#11615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11616 = ORIENTED_EDGE('',*,*,#11617,.T.);+#11617 = EDGE_CURVE('',#11595,#10922,#11618,.T.);+#11618 = SURFACE_CURVE('',#11619,(#11623,#11630),.PCURVE_S1.);+#11619 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11620,#11621,#11622),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11620 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.5000001)+ );+#11621 = CARTESIAN_POINT('',(0.189184570313,3.28125E-02,1.5000001));+#11622 = CARTESIAN_POINT('',(0.181380208333,2.347005208333E-02,1.5000001+ ));+#11623 = PCURVE('',#10960,#11624);+#11624 = DEFINITIONAL_REPRESENTATION('',(#11625),#11629);+#11625 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#11626,#11627,#11628),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11626 = CARTESIAN_POINT('',(0.1189453125,0.127604166667));+#11627 = CARTESIAN_POINT('',(0.1189453125,0.113590494792));+#11628 = CARTESIAN_POINT('',(0.111140950521,0.104248046875));+#11629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11630 = PCURVE('',#7040,#11631);+#11631 = DEFINITIONAL_REPRESENTATION('',(#11632),#11636);+#11632 = LINE('',#11633,#11634);+#11633 = CARTESIAN_POINT('',(0.,-0.1));+#11634 = VECTOR('',#11635,1.);+#11635 = DIRECTION('',(1.,0.));+#11636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11637 = ORIENTED_EDGE('',*,*,#10944,.T.);+#11638 = ADVANCED_FACE('',(#11639),#7040,.T.);+#11639 = FACE_BOUND('',#11640,.T.);+#11640 = EDGE_LOOP('',(#11641,#11642,#11663,#11664));+#11641 = ORIENTED_EDGE('',*,*,#7020,.T.);+#11642 = ORIENTED_EDGE('',*,*,#11643,.T.);+#11643 = EDGE_CURVE('',#6976,#11595,#11644,.T.);+#11644 = SURFACE_CURVE('',#11645,(#11649,#11656),.PCURVE_S1.);+#11645 = LINE('',#11646,#11647);+#11646 = CARTESIAN_POINT('',(0.189184570313,4.6826171875E-02,1.6000001)+ );+#11647 = VECTOR('',#11648,1.);+#11648 = DIRECTION('',(-0.,-0.,-1.));+#11649 = PCURVE('',#7040,#11650);+#11650 = DEFINITIONAL_REPRESENTATION('',(#11651),#11655);+#11651 = LINE('',#11652,#11653);+#11652 = CARTESIAN_POINT('',(0.,0.));+#11653 = VECTOR('',#11654,1.);+#11654 = DIRECTION('',(0.,-1.));+#11655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11656 = PCURVE('',#7001,#11657);+#11657 = DEFINITIONAL_REPRESENTATION('',(#11658),#11662);+#11658 = LINE('',#11659,#11660);+#11659 = CARTESIAN_POINT('',(1.,0.));+#11660 = VECTOR('',#11661,1.);+#11661 = DIRECTION('',(0.,-1.));+#11662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11663 = ORIENTED_EDGE('',*,*,#11617,.T.);+#11664 = ORIENTED_EDGE('',*,*,#10921,.F.);+#11665 = ADVANCED_FACE('',(#11666),#7001,.T.);+#11666 = FACE_BOUND('',#11667,.T.);+#11667 = EDGE_LOOP('',(#11668,#11669,#11690,#11691));+#11668 = ORIENTED_EDGE('',*,*,#6975,.T.);+#11669 = ORIENTED_EDGE('',*,*,#11670,.T.);+#11670 = EDGE_CURVE('',#6940,#11572,#11671,.T.);+#11671 = SURFACE_CURVE('',#11672,(#11676,#11683),.PCURVE_S1.);+#11672 = LINE('',#11673,#11674);+#11673 = CARTESIAN_POINT('',(0.17431640625,7.992350260417E-02,1.6000001)+ );+#11674 = VECTOR('',#11675,1.);+#11675 = DIRECTION('',(-0.,-0.,-1.));+#11676 = PCURVE('',#7001,#11677);+#11677 = DEFINITIONAL_REPRESENTATION('',(#11678),#11682);+#11678 = LINE('',#11679,#11680);+#11679 = CARTESIAN_POINT('',(0.,0.));+#11680 = VECTOR('',#11681,1.);+#11681 = DIRECTION('',(0.,-1.));+#11682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11683 = PCURVE('',#6959,#11684);+#11684 = DEFINITIONAL_REPRESENTATION('',(#11685),#11689);+#11685 = LINE('',#11686,#11687);+#11686 = CARTESIAN_POINT('',(1.,0.));+#11687 = VECTOR('',#11688,1.);+#11688 = DIRECTION('',(0.,-1.));+#11689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11690 = ORIENTED_EDGE('',*,*,#11594,.T.);+#11691 = ORIENTED_EDGE('',*,*,#11643,.F.);+#11692 = ADVANCED_FACE('',(#11693),#6959,.T.);+#11693 = FACE_BOUND('',#11694,.T.);+#11694 = EDGE_LOOP('',(#11695,#11696,#11717,#11718));+#11695 = ORIENTED_EDGE('',*,*,#6939,.T.);+#11696 = ORIENTED_EDGE('',*,*,#11697,.T.);+#11697 = EDGE_CURVE('',#6904,#11549,#11698,.T.);+#11698 = SURFACE_CURVE('',#11699,(#11703,#11710),.PCURVE_S1.);+#11699 = LINE('',#11700,#11701);+#11700 = CARTESIAN_POINT('',(0.134611002604,9.239908854167E-02,1.6000001+ ));+#11701 = VECTOR('',#11702,1.);+#11702 = DIRECTION('',(-0.,-0.,-1.));+#11703 = PCURVE('',#6959,#11704);+#11704 = DEFINITIONAL_REPRESENTATION('',(#11705),#11709);+#11705 = LINE('',#11706,#11707);+#11706 = CARTESIAN_POINT('',(0.,0.));+#11707 = VECTOR('',#11708,1.);+#11708 = DIRECTION('',(0.,-1.));+#11709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11710 = PCURVE('',#6923,#11711);+#11711 = DEFINITIONAL_REPRESENTATION('',(#11712),#11716);+#11712 = LINE('',#11713,#11714);+#11713 = CARTESIAN_POINT('',(1.,0.));+#11714 = VECTOR('',#11715,1.);+#11715 = DIRECTION('',(0.,-1.));+#11716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11717 = ORIENTED_EDGE('',*,*,#11571,.T.);+#11718 = ORIENTED_EDGE('',*,*,#11670,.F.);+#11719 = ADVANCED_FACE('',(#11720),#6923,.T.);+#11720 = FACE_BOUND('',#11721,.T.);+#11721 = EDGE_LOOP('',(#11722,#11723,#11744,#11745));+#11722 = ORIENTED_EDGE('',*,*,#6903,.T.);+#11723 = ORIENTED_EDGE('',*,*,#11724,.T.);+#11724 = EDGE_CURVE('',#6868,#11526,#11725,.T.);+#11725 = SURFACE_CURVE('',#11726,(#11730,#11737),.PCURVE_S1.);+#11726 = LINE('',#11727,#11728);+#11727 = CARTESIAN_POINT('',(0.11552734375,9.0576171875E-02,1.6000001));+#11728 = VECTOR('',#11729,1.);+#11729 = DIRECTION('',(-0.,-0.,-1.));+#11730 = PCURVE('',#6923,#11731);+#11731 = DEFINITIONAL_REPRESENTATION('',(#11732),#11736);+#11732 = LINE('',#11733,#11734);+#11733 = CARTESIAN_POINT('',(0.,0.));+#11734 = VECTOR('',#11735,1.);+#11735 = DIRECTION('',(0.,-1.));+#11736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11737 = PCURVE('',#6887,#11738);+#11738 = DEFINITIONAL_REPRESENTATION('',(#11739),#11743);+#11739 = LINE('',#11740,#11741);+#11740 = CARTESIAN_POINT('',(1.,0.));+#11741 = VECTOR('',#11742,1.);+#11742 = DIRECTION('',(0.,-1.));+#11743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11744 = ORIENTED_EDGE('',*,*,#11548,.T.);+#11745 = ORIENTED_EDGE('',*,*,#11697,.F.);+#11746 = ADVANCED_FACE('',(#11747),#6887,.T.);+#11747 = FACE_BOUND('',#11748,.T.);+#11748 = EDGE_LOOP('',(#11749,#11750,#11771,#11772));+#11749 = ORIENTED_EDGE('',*,*,#6867,.T.);+#11750 = ORIENTED_EDGE('',*,*,#11751,.T.);+#11751 = EDGE_CURVE('',#6841,#11503,#11752,.T.);+#11752 = SURFACE_CURVE('',#11753,(#11757,#11764),.PCURVE_S1.);+#11753 = LINE('',#11754,#11755);+#11754 = CARTESIAN_POINT('',(9.097493489583E-02,8.5107421875E-02,+ 1.6000001));+#11755 = VECTOR('',#11756,1.);+#11756 = DIRECTION('',(-0.,-0.,-1.));+#11757 = PCURVE('',#6887,#11758);+#11758 = DEFINITIONAL_REPRESENTATION('',(#11759),#11763);+#11759 = LINE('',#11760,#11761);+#11760 = CARTESIAN_POINT('',(0.,0.));+#11761 = VECTOR('',#11762,1.);+#11762 = DIRECTION('',(0.,-1.));+#11763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11764 = PCURVE('',#6856,#11765);+#11765 = DEFINITIONAL_REPRESENTATION('',(#11766),#11770);+#11766 = LINE('',#11767,#11768);+#11767 = CARTESIAN_POINT('',(2.119140625E-02,0.));+#11768 = VECTOR('',#11769,1.);+#11769 = DIRECTION('',(0.,-1.));+#11770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11771 = ORIENTED_EDGE('',*,*,#11525,.T.);+#11772 = ORIENTED_EDGE('',*,*,#11724,.F.);+#11773 = ADVANCED_FACE('',(#11774),#6856,.T.);+#11774 = FACE_BOUND('',#11775,.T.);+#11775 = EDGE_LOOP('',(#11776,#11777,#11798,#11799));+#11776 = ORIENTED_EDGE('',*,*,#6840,.F.);+#11777 = ORIENTED_EDGE('',*,*,#11778,.T.);+#11778 = EDGE_CURVE('',#6805,#11480,#11779,.T.);+#11779 = SURFACE_CURVE('',#11780,(#11784,#11791),.PCURVE_S1.);+#11780 = LINE('',#11781,#11782);+#11781 = CARTESIAN_POINT('',(9.097493489583E-02,6.3916015625E-02,+ 1.6000001));+#11782 = VECTOR('',#11783,1.);+#11783 = DIRECTION('',(-0.,-0.,-1.));+#11784 = PCURVE('',#6856,#11785);+#11785 = DEFINITIONAL_REPRESENTATION('',(#11786),#11790);+#11786 = LINE('',#11787,#11788);+#11787 = CARTESIAN_POINT('',(0.,0.));+#11788 = VECTOR('',#11789,1.);+#11789 = DIRECTION('',(0.,-1.));+#11790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11791 = PCURVE('',#6824,#11792);+#11792 = DEFINITIONAL_REPRESENTATION('',(#11793),#11797);+#11793 = LINE('',#11794,#11795);+#11794 = CARTESIAN_POINT('',(1.,0.));+#11795 = VECTOR('',#11796,1.);+#11796 = DIRECTION('',(0.,-1.));+#11797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11798 = ORIENTED_EDGE('',*,*,#11502,.T.);+#11799 = ORIENTED_EDGE('',*,*,#11751,.F.);+#11800 = ADVANCED_FACE('',(#11801),#6824,.T.);+#11801 = FACE_BOUND('',#11802,.T.);+#11802 = EDGE_LOOP('',(#11803,#11804,#11825,#11826));+#11803 = ORIENTED_EDGE('',*,*,#6804,.T.);+#11804 = ORIENTED_EDGE('',*,*,#11805,.T.);+#11805 = EDGE_CURVE('',#6769,#11457,#11806,.T.);+#11806 = SURFACE_CURVE('',#11807,(#11811,#11818),.PCURVE_S1.);+#11807 = LINE('',#11808,#11809);+#11808 = CARTESIAN_POINT('',(0.113647460938,7.0751953125E-02,1.6000001)+ );+#11809 = VECTOR('',#11810,1.);+#11810 = DIRECTION('',(-0.,-0.,-1.));+#11811 = PCURVE('',#6824,#11812);+#11812 = DEFINITIONAL_REPRESENTATION('',(#11813),#11817);+#11813 = LINE('',#11814,#11815);+#11814 = CARTESIAN_POINT('',(0.,0.));+#11815 = VECTOR('',#11816,1.);+#11816 = DIRECTION('',(0.,-1.));+#11817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11818 = PCURVE('',#6788,#11819);+#11819 = DEFINITIONAL_REPRESENTATION('',(#11820),#11824);+#11820 = LINE('',#11821,#11822);+#11821 = CARTESIAN_POINT('',(1.,0.));+#11822 = VECTOR('',#11823,1.);+#11823 = DIRECTION('',(0.,-1.));+#11824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11825 = ORIENTED_EDGE('',*,*,#11479,.T.);+#11826 = ORIENTED_EDGE('',*,*,#11778,.F.);+#11827 = ADVANCED_FACE('',(#11828),#6788,.T.);+#11828 = FACE_BOUND('',#11829,.T.);+#11829 = EDGE_LOOP('',(#11830,#11831,#11852,#11853));+#11830 = ORIENTED_EDGE('',*,*,#6768,.T.);+#11831 = ORIENTED_EDGE('',*,*,#11832,.T.);+#11832 = EDGE_CURVE('',#6733,#11434,#11833,.T.);+#11833 = SURFACE_CURVE('',#11834,(#11838,#11845),.PCURVE_S1.);+#11834 = LINE('',#11835,#11836);+#11835 = CARTESIAN_POINT('',(0.134611002604,7.303059895833E-02,1.6000001+ ));+#11836 = VECTOR('',#11837,1.);+#11837 = DIRECTION('',(-0.,-0.,-1.));+#11838 = PCURVE('',#6788,#11839);+#11839 = DEFINITIONAL_REPRESENTATION('',(#11840),#11844);+#11840 = LINE('',#11841,#11842);+#11841 = CARTESIAN_POINT('',(0.,0.));+#11842 = VECTOR('',#11843,1.);+#11843 = DIRECTION('',(0.,-1.));+#11844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11845 = PCURVE('',#6752,#11846);+#11846 = DEFINITIONAL_REPRESENTATION('',(#11847),#11851);+#11847 = LINE('',#11848,#11849);+#11848 = CARTESIAN_POINT('',(1.,0.));+#11849 = VECTOR('',#11850,1.);+#11850 = DIRECTION('',(0.,-1.));+#11851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11852 = ORIENTED_EDGE('',*,*,#11456,.T.);+#11853 = ORIENTED_EDGE('',*,*,#11805,.F.);+#11854 = ADVANCED_FACE('',(#11855),#6752,.T.);+#11855 = FACE_BOUND('',#11856,.T.);+#11856 = EDGE_LOOP('',(#11857,#11858,#11879,#11880));+#11857 = ORIENTED_EDGE('',*,*,#6732,.T.);+#11858 = ORIENTED_EDGE('',*,*,#11859,.T.);+#11859 = EDGE_CURVE('',#6697,#11411,#11860,.T.);+#11860 = SURFACE_CURVE('',#11861,(#11865,#11872),.PCURVE_S1.);+#11861 = LINE('',#11862,#11863);+#11862 = CARTESIAN_POINT('',(0.158138020833,6.602376302083E-02,1.6000001+ ));+#11863 = VECTOR('',#11864,1.);+#11864 = DIRECTION('',(-0.,-0.,-1.));+#11865 = PCURVE('',#6752,#11866);+#11866 = DEFINITIONAL_REPRESENTATION('',(#11867),#11871);+#11867 = LINE('',#11868,#11869);+#11868 = CARTESIAN_POINT('',(0.,0.));+#11869 = VECTOR('',#11870,1.);+#11870 = DIRECTION('',(0.,-1.));+#11871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11872 = PCURVE('',#6716,#11873);+#11873 = DEFINITIONAL_REPRESENTATION('',(#11874),#11878);+#11874 = LINE('',#11875,#11876);+#11875 = CARTESIAN_POINT('',(1.,0.));+#11876 = VECTOR('',#11877,1.);+#11877 = DIRECTION('',(0.,-1.));+#11878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11879 = ORIENTED_EDGE('',*,*,#11433,.T.);+#11880 = ORIENTED_EDGE('',*,*,#11832,.F.);+#11881 = ADVANCED_FACE('',(#11882),#6716,.T.);+#11882 = FACE_BOUND('',#11883,.T.);+#11883 = EDGE_LOOP('',(#11884,#11885,#11906,#11907));+#11884 = ORIENTED_EDGE('',*,*,#6696,.T.);+#11885 = ORIENTED_EDGE('',*,*,#11886,.T.);+#11886 = EDGE_CURVE('',#6652,#11388,#11887,.T.);+#11887 = SURFACE_CURVE('',#11888,(#11892,#11899),.PCURVE_S1.);+#11888 = LINE('',#11889,#11890);+#11889 = CARTESIAN_POINT('',(0.166398111979,4.591471354167E-02,1.6000001+ ));+#11890 = VECTOR('',#11891,1.);+#11891 = DIRECTION('',(-0.,-0.,-1.));+#11892 = PCURVE('',#6716,#11893);+#11893 = DEFINITIONAL_REPRESENTATION('',(#11894),#11898);+#11894 = LINE('',#11895,#11896);+#11895 = CARTESIAN_POINT('',(0.,0.));+#11896 = VECTOR('',#11897,1.);+#11897 = DIRECTION('',(0.,-1.));+#11898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11899 = PCURVE('',#6677,#11900);+#11900 = DEFINITIONAL_REPRESENTATION('',(#11901),#11905);+#11901 = LINE('',#11902,#11903);+#11902 = CARTESIAN_POINT('',(1.,0.));+#11903 = VECTOR('',#11904,1.);+#11904 = DIRECTION('',(0.,-1.));+#11905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11906 = ORIENTED_EDGE('',*,*,#11410,.T.);+#11907 = ORIENTED_EDGE('',*,*,#11859,.F.);+#11908 = ADVANCED_FACE('',(#11909),#6677,.T.);+#11909 = FACE_BOUND('',#11910,.T.);+#11910 = EDGE_LOOP('',(#11911,#11912,#11933,#11934));+#11911 = ORIENTED_EDGE('',*,*,#6651,.T.);+#11912 = ORIENTED_EDGE('',*,*,#11913,.T.);+#11913 = EDGE_CURVE('',#6616,#11365,#11914,.T.);+#11914 = SURFACE_CURVE('',#11915,(#11919,#11926),.PCURVE_S1.);+#11915 = LINE('',#11916,#11917);+#11916 = CARTESIAN_POINT('',(0.157511393229,2.654622395833E-02,1.6000001+ ));+#11917 = VECTOR('',#11918,1.);+#11918 = DIRECTION('',(-0.,-0.,-1.));+#11919 = PCURVE('',#6677,#11920);+#11920 = DEFINITIONAL_REPRESENTATION('',(#11921),#11925);+#11921 = LINE('',#11922,#11923);+#11922 = CARTESIAN_POINT('',(0.,0.));+#11923 = VECTOR('',#11924,1.);+#11924 = DIRECTION('',(0.,-1.));+#11925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11926 = PCURVE('',#6635,#11927);+#11927 = DEFINITIONAL_REPRESENTATION('',(#11928),#11932);+#11928 = LINE('',#11929,#11930);+#11929 = CARTESIAN_POINT('',(1.,0.));+#11930 = VECTOR('',#11931,1.);+#11931 = DIRECTION('',(0.,-1.));+#11932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11933 = ORIENTED_EDGE('',*,*,#11387,.T.);+#11934 = ORIENTED_EDGE('',*,*,#11886,.F.);+#11935 = ADVANCED_FACE('',(#11936),#6635,.T.);+#11936 = FACE_BOUND('',#11937,.T.);+#11937 = EDGE_LOOP('',(#11938,#11939,#11960,#11961));+#11938 = ORIENTED_EDGE('',*,*,#6615,.T.);+#11939 = ORIENTED_EDGE('',*,*,#11940,.T.);+#11940 = EDGE_CURVE('',#6589,#11342,#11941,.T.);+#11941 = SURFACE_CURVE('',#11942,(#11946,#11953),.PCURVE_S1.);+#11942 = LINE('',#11943,#11944);+#11943 = CARTESIAN_POINT('',(0.132788085938,1.959635416667E-02,1.6000001+ ));+#11944 = VECTOR('',#11945,1.);+#11945 = DIRECTION('',(-0.,-0.,-1.));+#11946 = PCURVE('',#6635,#11947);+#11947 = DEFINITIONAL_REPRESENTATION('',(#11948),#11952);+#11948 = LINE('',#11949,#11950);+#11949 = CARTESIAN_POINT('',(0.,0.));+#11950 = VECTOR('',#11951,1.);+#11951 = DIRECTION('',(0.,-1.));+#11952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11953 = PCURVE('',#6604,#11954);+#11954 = DEFINITIONAL_REPRESENTATION('',(#11955),#11959);+#11955 = LINE('',#11956,#11957);+#11956 = CARTESIAN_POINT('',(1.754557291667E-02,0.));+#11957 = VECTOR('',#11958,1.);+#11958 = DIRECTION('',(0.,-1.));+#11959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11960 = ORIENTED_EDGE('',*,*,#11364,.T.);+#11961 = ORIENTED_EDGE('',*,*,#11913,.F.);+#11962 = ADVANCED_FACE('',(#11963),#6604,.T.);+#11963 = FACE_BOUND('',#11964,.T.);+#11964 = EDGE_LOOP('',(#11965,#11966,#11987,#11988));+#11965 = ORIENTED_EDGE('',*,*,#6588,.F.);+#11966 = ORIENTED_EDGE('',*,*,#11967,.T.);+#11967 = EDGE_CURVE('',#6562,#11319,#11968,.T.);+#11968 = SURFACE_CURVE('',#11969,(#11973,#11980),.PCURVE_S1.);+#11969 = LINE('',#11970,#11971);+#11970 = CARTESIAN_POINT('',(0.115242513021,1.959635416667E-02,1.6000001+ ));+#11971 = VECTOR('',#11972,1.);+#11972 = DIRECTION('',(-0.,-0.,-1.));+#11973 = PCURVE('',#6604,#11974);+#11974 = DEFINITIONAL_REPRESENTATION('',(#11975),#11979);+#11975 = LINE('',#11976,#11977);+#11976 = CARTESIAN_POINT('',(0.,0.));+#11977 = VECTOR('',#11978,1.);+#11978 = DIRECTION('',(0.,-1.));+#11979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11980 = PCURVE('',#6577,#11981);+#11981 = DEFINITIONAL_REPRESENTATION('',(#11982),#11986);+#11982 = LINE('',#11983,#11984);+#11983 = CARTESIAN_POINT('',(1.891276041667E-02,0.));+#11984 = VECTOR('',#11985,1.);+#11985 = DIRECTION('',(0.,-1.));+#11986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#11987 = ORIENTED_EDGE('',*,*,#11341,.T.);+#11988 = ORIENTED_EDGE('',*,*,#11940,.F.);+#11989 = ADVANCED_FACE('',(#11990),#6577,.T.);+#11990 = FACE_BOUND('',#11991,.T.);+#11991 = EDGE_LOOP('',(#11992,#11993,#12014,#12015));+#11992 = ORIENTED_EDGE('',*,*,#6561,.F.);+#11993 = ORIENTED_EDGE('',*,*,#11994,.T.);+#11994 = EDGE_CURVE('',#6535,#11296,#11995,.T.);+#11995 = SURFACE_CURVE('',#11996,(#12000,#12007),.PCURVE_S1.);+#11996 = LINE('',#11997,#11998);+#11997 = CARTESIAN_POINT('',(0.115242513021,6.8359375E-04,1.6000001));+#11998 = VECTOR('',#11999,1.);+#11999 = DIRECTION('',(-0.,-0.,-1.));+#12000 = PCURVE('',#6577,#12001);+#12001 = DEFINITIONAL_REPRESENTATION('',(#12002),#12006);+#12002 = LINE('',#12003,#12004);+#12003 = CARTESIAN_POINT('',(0.,0.));+#12004 = VECTOR('',#12005,1.);+#12005 = DIRECTION('',(0.,-1.));+#12006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12007 = PCURVE('',#6550,#12008);+#12008 = DEFINITIONAL_REPRESENTATION('',(#12009),#12013);+#12009 = LINE('',#12010,#12011);+#12010 = CARTESIAN_POINT('',(1.754557291667E-02,0.));+#12011 = VECTOR('',#12012,1.);+#12012 = DIRECTION('',(0.,-1.));+#12013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12014 = ORIENTED_EDGE('',*,*,#11318,.T.);+#12015 = ORIENTED_EDGE('',*,*,#11967,.F.);+#12016 = ADVANCED_FACE('',(#12017),#6550,.T.);+#12017 = FACE_BOUND('',#12018,.T.);+#12018 = EDGE_LOOP('',(#12019,#12020,#12041,#12042));+#12019 = ORIENTED_EDGE('',*,*,#6534,.F.);+#12020 = ORIENTED_EDGE('',*,*,#12021,.T.);+#12021 = EDGE_CURVE('',#6499,#11273,#12022,.T.);+#12022 = SURFACE_CURVE('',#12023,(#12027,#12034),.PCURVE_S1.);+#12023 = LINE('',#12024,#12025);+#12024 = CARTESIAN_POINT('',(0.132788085938,6.8359375E-04,1.6000001));+#12025 = VECTOR('',#12026,1.);+#12026 = DIRECTION('',(-0.,-0.,-1.));+#12027 = PCURVE('',#6550,#12028);+#12028 = DEFINITIONAL_REPRESENTATION('',(#12029),#12033);+#12029 = LINE('',#12030,#12031);+#12030 = CARTESIAN_POINT('',(0.,0.));+#12031 = VECTOR('',#12032,1.);+#12032 = DIRECTION('',(0.,-1.));+#12033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12034 = PCURVE('',#6518,#12035);+#12035 = DEFINITIONAL_REPRESENTATION('',(#12036),#12040);+#12036 = LINE('',#12037,#12038);+#12037 = CARTESIAN_POINT('',(1.,0.));+#12038 = VECTOR('',#12039,1.);+#12039 = DIRECTION('',(0.,-1.));+#12040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12041 = ORIENTED_EDGE('',*,*,#11295,.T.);+#12042 = ORIENTED_EDGE('',*,*,#11994,.F.);+#12043 = ADVANCED_FACE('',(#12044),#6518,.T.);+#12044 = FACE_BOUND('',#12045,.T.);+#12045 = EDGE_LOOP('',(#12046,#12047,#12068,#12069));+#12046 = ORIENTED_EDGE('',*,*,#6498,.T.);+#12047 = ORIENTED_EDGE('',*,*,#12048,.T.);+#12048 = EDGE_CURVE('',#6463,#11250,#12049,.T.);+#12049 = SURFACE_CURVE('',#12050,(#12054,#12061),.PCURVE_S1.);+#12050 = LINE('',#12051,#12052);+#12051 = CARTESIAN_POINT('',(0.160245768229,-8.0322265625E-03,1.6000001)+ );+#12052 = VECTOR('',#12053,1.);+#12053 = DIRECTION('',(-0.,-0.,-1.));+#12054 = PCURVE('',#6518,#12055);+#12055 = DEFINITIONAL_REPRESENTATION('',(#12056),#12060);+#12056 = LINE('',#12057,#12058);+#12057 = CARTESIAN_POINT('',(0.,0.));+#12058 = VECTOR('',#12059,1.);+#12059 = DIRECTION('',(0.,-1.));+#12060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12061 = PCURVE('',#6482,#12062);+#12062 = DEFINITIONAL_REPRESENTATION('',(#12063),#12067);+#12063 = LINE('',#12064,#12065);+#12064 = CARTESIAN_POINT('',(1.,0.));+#12065 = VECTOR('',#12066,1.);+#12066 = DIRECTION('',(0.,-1.));+#12067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12068 = ORIENTED_EDGE('',*,*,#11272,.T.);+#12069 = ORIENTED_EDGE('',*,*,#12021,.F.);+#12070 = ADVANCED_FACE('',(#12071),#6482,.T.);+#12071 = FACE_BOUND('',#12072,.T.);+#12072 = EDGE_LOOP('',(#12073,#12074,#12095,#12096));+#12073 = ORIENTED_EDGE('',*,*,#6462,.T.);+#12074 = ORIENTED_EDGE('',*,*,#12075,.T.);+#12075 = EDGE_CURVE('',#6427,#11227,#12076,.T.);+#12076 = SURFACE_CURVE('',#12077,(#12081,#12088),.PCURVE_S1.);+#12077 = LINE('',#12078,#12079);+#12078 = CARTESIAN_POINT('',(0.170385742188,-3.155924479167E-02,+ 1.6000001));+#12079 = VECTOR('',#12080,1.);+#12080 = DIRECTION('',(-0.,-0.,-1.));+#12081 = PCURVE('',#6482,#12082);+#12082 = DEFINITIONAL_REPRESENTATION('',(#12083),#12087);+#12083 = LINE('',#12084,#12085);+#12084 = CARTESIAN_POINT('',(0.,0.));+#12085 = VECTOR('',#12086,1.);+#12086 = DIRECTION('',(0.,-1.));+#12087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12088 = PCURVE('',#6446,#12089);+#12089 = DEFINITIONAL_REPRESENTATION('',(#12090),#12094);+#12090 = LINE('',#12091,#12092);+#12091 = CARTESIAN_POINT('',(1.,0.));+#12092 = VECTOR('',#12093,1.);+#12093 = DIRECTION('',(0.,-1.));+#12094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12095 = ORIENTED_EDGE('',*,*,#11249,.T.);+#12096 = ORIENTED_EDGE('',*,*,#12048,.F.);+#12097 = ADVANCED_FACE('',(#12098),#6446,.T.);+#12098 = FACE_BOUND('',#12099,.T.);+#12099 = EDGE_LOOP('',(#12100,#12101,#12122,#12123));+#12100 = ORIENTED_EDGE('',*,*,#6426,.T.);+#12101 = ORIENTED_EDGE('',*,*,#12102,.T.);+#12102 = EDGE_CURVE('',#6391,#11204,#12103,.T.);+#12103 = SURFACE_CURVE('',#12104,(#12108,#12115),.PCURVE_S1.);+#12104 = LINE('',#12105,#12106);+#12105 = CARTESIAN_POINT('',(0.160245768229,-5.616861979167E-02,+ 1.6000001));+#12106 = VECTOR('',#12107,1.);+#12107 = DIRECTION('',(-0.,-0.,-1.));+#12108 = PCURVE('',#6446,#12109);+#12109 = DEFINITIONAL_REPRESENTATION('',(#12110),#12114);+#12110 = LINE('',#12111,#12112);+#12111 = CARTESIAN_POINT('',(0.,0.));+#12112 = VECTOR('',#12113,1.);+#12113 = DIRECTION('',(0.,-1.));+#12114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12115 = PCURVE('',#6410,#12116);+#12116 = DEFINITIONAL_REPRESENTATION('',(#12117),#12121);+#12117 = LINE('',#12118,#12119);+#12118 = CARTESIAN_POINT('',(1.,0.));+#12119 = VECTOR('',#12120,1.);+#12120 = DIRECTION('',(0.,-1.));+#12121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12122 = ORIENTED_EDGE('',*,*,#11226,.T.);+#12123 = ORIENTED_EDGE('',*,*,#12075,.F.);+#12124 = ADVANCED_FACE('',(#12125),#6410,.T.);+#12125 = FACE_BOUND('',#12126,.T.);+#12126 = EDGE_LOOP('',(#12127,#12128,#12149,#12150));+#12127 = ORIENTED_EDGE('',*,*,#6390,.T.);+#12128 = ORIENTED_EDGE('',*,*,#12129,.T.);+#12129 = EDGE_CURVE('',#6355,#11181,#12130,.T.);+#12130 = SURFACE_CURVE('',#12131,(#12135,#12142),.PCURVE_S1.);+#12131 = LINE('',#12132,#12133);+#12132 = CARTESIAN_POINT('',(0.131193033854,-6.471354166667E-02,+ 1.6000001));+#12133 = VECTOR('',#12134,1.);+#12134 = DIRECTION('',(-0.,-0.,-1.));+#12135 = PCURVE('',#6410,#12136);+#12136 = DEFINITIONAL_REPRESENTATION('',(#12137),#12141);+#12137 = LINE('',#12138,#12139);+#12138 = CARTESIAN_POINT('',(0.,0.));+#12139 = VECTOR('',#12140,1.);+#12140 = DIRECTION('',(0.,-1.));+#12141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12142 = PCURVE('',#6374,#12143);+#12143 = DEFINITIONAL_REPRESENTATION('',(#12144),#12148);+#12144 = LINE('',#12145,#12146);+#12145 = CARTESIAN_POINT('',(1.,0.));+#12146 = VECTOR('',#12147,1.);+#12147 = DIRECTION('',(0.,-1.));+#12148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12149 = ORIENTED_EDGE('',*,*,#11203,.T.);+#12150 = ORIENTED_EDGE('',*,*,#12102,.F.);+#12151 = ADVANCED_FACE('',(#12152),#6374,.T.);+#12152 = FACE_BOUND('',#12153,.T.);+#12153 = EDGE_LOOP('',(#12154,#12155,#12176,#12177));+#12154 = ORIENTED_EDGE('',*,*,#6354,.T.);+#12155 = ORIENTED_EDGE('',*,*,#12156,.T.);+#12156 = EDGE_CURVE('',#6319,#11158,#12157,.T.);+#12157 = SURFACE_CURVE('',#12158,(#12162,#12169),.PCURVE_S1.);+#12158 = LINE('',#12159,#12160);+#12159 = CARTESIAN_POINT('',(0.108748372396,-6.175130208333E-02,+ 1.6000001));+#12160 = VECTOR('',#12161,1.);+#12161 = DIRECTION('',(-0.,-0.,-1.));+#12162 = PCURVE('',#6374,#12163);+#12163 = DEFINITIONAL_REPRESENTATION('',(#12164),#12168);+#12164 = LINE('',#12165,#12166);+#12165 = CARTESIAN_POINT('',(0.,0.));+#12166 = VECTOR('',#12167,1.);+#12167 = DIRECTION('',(0.,-1.));+#12168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12169 = PCURVE('',#6338,#12170);+#12170 = DEFINITIONAL_REPRESENTATION('',(#12171),#12175);+#12171 = LINE('',#12172,#12173);+#12172 = CARTESIAN_POINT('',(1.,0.));+#12173 = VECTOR('',#12174,1.);+#12174 = DIRECTION('',(0.,-1.));+#12175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12176 = ORIENTED_EDGE('',*,*,#11180,.T.);+#12177 = ORIENTED_EDGE('',*,*,#12129,.F.);+#12178 = ADVANCED_FACE('',(#12179),#6338,.T.);+#12179 = FACE_BOUND('',#12180,.T.);+#12180 = EDGE_LOOP('',(#12181,#12182,#12203,#12204));+#12181 = ORIENTED_EDGE('',*,*,#6318,.T.);+#12182 = ORIENTED_EDGE('',*,*,#12183,.T.);+#12183 = EDGE_CURVE('',#6292,#11135,#12184,.T.);+#12184 = SURFACE_CURVE('',#12185,(#12189,#12196),.PCURVE_S1.);+#12185 = LINE('',#12186,#12187);+#12186 = CARTESIAN_POINT('',(8.584798177083E-02,-5.275065104167E-02,+ 1.6000001));+#12187 = VECTOR('',#12188,1.);+#12188 = DIRECTION('',(-0.,-0.,-1.));+#12189 = PCURVE('',#6338,#12190);+#12190 = DEFINITIONAL_REPRESENTATION('',(#12191),#12195);+#12191 = LINE('',#12192,#12193);+#12192 = CARTESIAN_POINT('',(0.,0.));+#12193 = VECTOR('',#12194,1.);+#12194 = DIRECTION('',(0.,-1.));+#12195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12196 = PCURVE('',#6307,#12197);+#12197 = DEFINITIONAL_REPRESENTATION('',(#12198),#12202);+#12198 = LINE('',#12199,#12200);+#12199 = CARTESIAN_POINT('',(2.2900390625E-02,0.));+#12200 = VECTOR('',#12201,1.);+#12201 = DIRECTION('',(0.,-1.));+#12202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12203 = ORIENTED_EDGE('',*,*,#11157,.T.);+#12204 = ORIENTED_EDGE('',*,*,#12156,.F.);+#12205 = ADVANCED_FACE('',(#12206),#6307,.T.);+#12206 = FACE_BOUND('',#12207,.T.);+#12207 = EDGE_LOOP('',(#12208,#12209,#12230,#12231));+#12208 = ORIENTED_EDGE('',*,*,#6291,.F.);+#12209 = ORIENTED_EDGE('',*,*,#12210,.T.);+#12210 = EDGE_CURVE('',#6256,#11112,#12211,.T.);+#12211 = SURFACE_CURVE('',#12212,(#12216,#12223),.PCURVE_S1.);+#12212 = LINE('',#12213,#12214);+#12213 = CARTESIAN_POINT('',(8.584798177083E-02,-7.565104166667E-02,+ 1.6000001));+#12214 = VECTOR('',#12215,1.);+#12215 = DIRECTION('',(-0.,-0.,-1.));+#12216 = PCURVE('',#6307,#12217);+#12217 = DEFINITIONAL_REPRESENTATION('',(#12218),#12222);+#12218 = LINE('',#12219,#12220);+#12219 = CARTESIAN_POINT('',(0.,0.));+#12220 = VECTOR('',#12221,1.);+#12221 = DIRECTION('',(0.,-1.));+#12222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12223 = PCURVE('',#6275,#12224);+#12224 = DEFINITIONAL_REPRESENTATION('',(#12225),#12229);+#12225 = LINE('',#12226,#12227);+#12226 = CARTESIAN_POINT('',(1.,0.));+#12227 = VECTOR('',#12228,1.);+#12228 = DIRECTION('',(0.,-1.));+#12229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12230 = ORIENTED_EDGE('',*,*,#11134,.T.);+#12231 = ORIENTED_EDGE('',*,*,#12183,.F.);+#12232 = ADVANCED_FACE('',(#12233),#6275,.T.);+#12233 = FACE_BOUND('',#12234,.T.);+#12234 = EDGE_LOOP('',(#12235,#12236,#12257,#12258));+#12235 = ORIENTED_EDGE('',*,*,#6255,.T.);+#12236 = ORIENTED_EDGE('',*,*,#12237,.T.);+#12237 = EDGE_CURVE('',#6220,#11089,#12238,.T.);+#12238 = SURFACE_CURVE('',#12239,(#12243,#12250),.PCURVE_S1.);+#12239 = LINE('',#12240,#12241);+#12240 = CARTESIAN_POINT('',(0.109773763021,-8.191731770833E-02,+ 1.6000001));+#12241 = VECTOR('',#12242,1.);+#12242 = DIRECTION('',(-0.,-0.,-1.));+#12243 = PCURVE('',#6275,#12244);+#12244 = DEFINITIONAL_REPRESENTATION('',(#12245),#12249);+#12245 = LINE('',#12246,#12247);+#12246 = CARTESIAN_POINT('',(0.,0.));+#12247 = VECTOR('',#12248,1.);+#12248 = DIRECTION('',(0.,-1.));+#12249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12250 = PCURVE('',#6239,#12251);+#12251 = DEFINITIONAL_REPRESENTATION('',(#12252),#12256);+#12252 = LINE('',#12253,#12254);+#12253 = CARTESIAN_POINT('',(1.,0.));+#12254 = VECTOR('',#12255,1.);+#12255 = DIRECTION('',(0.,-1.));+#12256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12257 = ORIENTED_EDGE('',*,*,#11111,.T.);+#12258 = ORIENTED_EDGE('',*,*,#12210,.F.);+#12259 = ADVANCED_FACE('',(#12260),#6239,.T.);+#12260 = FACE_BOUND('',#12261,.T.);+#12261 = EDGE_LOOP('',(#12262,#12263,#12284,#12285));+#12262 = ORIENTED_EDGE('',*,*,#6219,.T.);+#12263 = ORIENTED_EDGE('',*,*,#12264,.T.);+#12264 = EDGE_CURVE('',#6184,#11066,#12265,.T.);+#12265 = SURFACE_CURVE('',#12266,(#12270,#12277),.PCURVE_S1.);+#12266 = LINE('',#12267,#12268);+#12267 = CARTESIAN_POINT('',(0.133699544271,-8.408203125E-02,1.6000001)+ );+#12268 = VECTOR('',#12269,1.);+#12269 = DIRECTION('',(-0.,-0.,-1.));+#12270 = PCURVE('',#6239,#12271);+#12271 = DEFINITIONAL_REPRESENTATION('',(#12272),#12276);+#12272 = LINE('',#12273,#12274);+#12273 = CARTESIAN_POINT('',(0.,0.));+#12274 = VECTOR('',#12275,1.);+#12275 = DIRECTION('',(0.,-1.));+#12276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12277 = PCURVE('',#6203,#12278);+#12278 = DEFINITIONAL_REPRESENTATION('',(#12279),#12283);+#12279 = LINE('',#12280,#12281);+#12280 = CARTESIAN_POINT('',(1.,0.));+#12281 = VECTOR('',#12282,1.);+#12282 = DIRECTION('',(0.,-1.));+#12283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12284 = ORIENTED_EDGE('',*,*,#11088,.T.);+#12285 = ORIENTED_EDGE('',*,*,#12237,.F.);+#12286 = ADVANCED_FACE('',(#12287),#6203,.T.);+#12287 = FACE_BOUND('',#12288,.T.);+#12288 = EDGE_LOOP('',(#12289,#12290,#12311,#12312));+#12289 = ORIENTED_EDGE('',*,*,#6183,.T.);+#12290 = ORIENTED_EDGE('',*,*,#12291,.T.);+#12291 = EDGE_CURVE('',#6148,#11043,#12292,.T.);+#12292 = SURFACE_CURVE('',#12293,(#12297,#12304),.PCURVE_S1.);+#12293 = LINE('',#12294,#12295);+#12294 = CARTESIAN_POINT('',(0.177392578125,-7.069498697917E-02,+ 1.6000001));+#12295 = VECTOR('',#12296,1.);+#12296 = DIRECTION('',(-0.,-0.,-1.));+#12297 = PCURVE('',#6203,#12298);+#12298 = DEFINITIONAL_REPRESENTATION('',(#12299),#12303);+#12299 = LINE('',#12300,#12301);+#12300 = CARTESIAN_POINT('',(0.,0.));+#12301 = VECTOR('',#12302,1.);+#12302 = DIRECTION('',(0.,-1.));+#12303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12304 = PCURVE('',#6167,#12305);+#12305 = DEFINITIONAL_REPRESENTATION('',(#12306),#12310);+#12306 = LINE('',#12307,#12308);+#12307 = CARTESIAN_POINT('',(1.,0.));+#12308 = VECTOR('',#12309,1.);+#12309 = DIRECTION('',(0.,-1.));+#12310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12311 = ORIENTED_EDGE('',*,*,#11065,.T.);+#12312 = ORIENTED_EDGE('',*,*,#12264,.F.);+#12313 = ADVANCED_FACE('',(#12314),#6167,.T.);+#12314 = FACE_BOUND('',#12315,.T.);+#12315 = EDGE_LOOP('',(#12316,#12317,#12338,#12339));+#12316 = ORIENTED_EDGE('',*,*,#6147,.T.);+#12317 = ORIENTED_EDGE('',*,*,#12318,.T.);+#12318 = EDGE_CURVE('',#6112,#11020,#12319,.T.);+#12319 = SURFACE_CURVE('',#12320,(#12324,#12331),.PCURVE_S1.);+#12320 = LINE('',#12321,#12322);+#12321 = CARTESIAN_POINT('',(0.193172200521,-3.3837890625E-02,1.6000001)+ );+#12322 = VECTOR('',#12323,1.);+#12323 = DIRECTION('',(-0.,-0.,-1.));+#12324 = PCURVE('',#6167,#12325);+#12325 = DEFINITIONAL_REPRESENTATION('',(#12326),#12330);+#12326 = LINE('',#12327,#12328);+#12327 = CARTESIAN_POINT('',(0.,0.));+#12328 = VECTOR('',#12329,1.);+#12329 = DIRECTION('',(0.,-1.));+#12330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12331 = PCURVE('',#6131,#12332);+#12332 = DEFINITIONAL_REPRESENTATION('',(#12333),#12337);+#12333 = LINE('',#12334,#12335);+#12334 = CARTESIAN_POINT('',(1.,0.));+#12335 = VECTOR('',#12336,1.);+#12336 = DIRECTION('',(0.,-1.));+#12337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12338 = ORIENTED_EDGE('',*,*,#11042,.T.);+#12339 = ORIENTED_EDGE('',*,*,#12291,.F.);+#12340 = ADVANCED_FACE('',(#12341),#6131,.T.);+#12341 = FACE_BOUND('',#12342,.T.);+#12342 = EDGE_LOOP('',(#12343,#12344,#12365,#12366));+#12343 = ORIENTED_EDGE('',*,*,#6111,.T.);+#12344 = ORIENTED_EDGE('',*,*,#12345,.T.);+#12345 = EDGE_CURVE('',#6074,#10997,#12346,.T.);+#12346 = SURFACE_CURVE('',#12347,(#12351,#12358),.PCURVE_S1.);+#12347 = LINE('',#12348,#12349);+#12348 = CARTESIAN_POINT('',(0.184285481771,-5.525716145833E-03,+ 1.6000001));+#12349 = VECTOR('',#12350,1.);+#12350 = DIRECTION('',(-0.,-0.,-1.));+#12351 = PCURVE('',#6131,#12352);+#12352 = DEFINITIONAL_REPRESENTATION('',(#12353),#12357);+#12353 = LINE('',#12354,#12355);+#12354 = CARTESIAN_POINT('',(0.,0.));+#12355 = VECTOR('',#12356,1.);+#12356 = DIRECTION('',(0.,-1.));+#12357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12358 = PCURVE('',#6095,#12359);+#12359 = DEFINITIONAL_REPRESENTATION('',(#12360),#12364);+#12360 = LINE('',#12361,#12362);+#12361 = CARTESIAN_POINT('',(1.,0.));+#12362 = VECTOR('',#12363,1.);+#12363 = DIRECTION('',(0.,-1.));+#12364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12365 = ORIENTED_EDGE('',*,*,#11019,.T.);+#12366 = ORIENTED_EDGE('',*,*,#12318,.F.);+#12367 = ADVANCED_FACE('',(#12368),#6095,.T.);+#12368 = FACE_BOUND('',#12369,.T.);+#12369 = EDGE_LOOP('',(#12370,#12371,#12372,#12373));+#12370 = ORIENTED_EDGE('',*,*,#6073,.T.);+#12371 = ORIENTED_EDGE('',*,*,#10972,.T.);+#12372 = ORIENTED_EDGE('',*,*,#10996,.T.);+#12373 = ORIENTED_EDGE('',*,*,#12345,.F.);+#12374 = ADVANCED_FACE('',(#12375),#6055,.T.);+#12375 = FACE_BOUND('',#12376,.T.);+#12376 = EDGE_LOOP('',(#12377,#12378,#12401,#12429));+#12377 = ORIENTED_EDGE('',*,*,#6037,.T.);+#12378 = ORIENTED_EDGE('',*,*,#12379,.T.);+#12379 = EDGE_CURVE('',#6002,#12380,#12382,.T.);+#12380 = VERTEX_POINT('',#12381);+#12381 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,+ 1.5000001));+#12382 = SURFACE_CURVE('',#12383,(#12387,#12394),.PCURVE_S1.);+#12383 = LINE('',#12384,#12385);+#12384 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,+ 1.6000001));+#12385 = VECTOR('',#12386,1.);+#12386 = DIRECTION('',(-0.,-0.,-1.));+#12387 = PCURVE('',#6055,#12388);+#12388 = DEFINITIONAL_REPRESENTATION('',(#12389),#12393);+#12389 = LINE('',#12390,#12391);+#12390 = CARTESIAN_POINT('',(0.,0.));+#12391 = VECTOR('',#12392,1.);+#12392 = DIRECTION('',(0.,-1.));+#12393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12394 = PCURVE('',#6021,#12395);+#12395 = DEFINITIONAL_REPRESENTATION('',(#12396),#12400);+#12396 = LINE('',#12397,#12398);+#12397 = CARTESIAN_POINT('',(1.,0.));+#12398 = VECTOR('',#12399,1.);+#12399 = DIRECTION('',(0.,-1.));+#12400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12401 = ORIENTED_EDGE('',*,*,#12402,.T.);+#12402 = EDGE_CURVE('',#12380,#12403,#12405,.T.);+#12403 = VERTEX_POINT('',#12404);+#12404 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,+ 1.5000001));+#12405 = SURFACE_CURVE('',#12406,(#12410,#12417),.PCURVE_S1.);+#12406 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12407,#12408,#12409),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12407 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,+ 1.5000001));+#12408 = CARTESIAN_POINT('',(-2.113444010417E-02,1.23046875E-02,+ 1.5000001));+#12409 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,+ 1.5000001));+#12410 = PCURVE('',#6055,#12411);+#12411 = DEFINITIONAL_REPRESENTATION('',(#12412),#12416);+#12412 = LINE('',#12413,#12414);+#12413 = CARTESIAN_POINT('',(0.,-0.1));+#12414 = VECTOR('',#12415,1.);+#12415 = DIRECTION('',(1.,0.));+#12416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12417 = PCURVE('',#12418,#12423);+#12418 = PLANE('',#12419);+#12419 = AXIS2_PLACEMENT_3D('',#12420,#12421,#12422);+#12420 = CARTESIAN_POINT('',(-7.02392578125E-02,-8.077799479167E-02,+ 1.5000001));+#12421 = DIRECTION('',(0.,0.,1.));+#12422 = DIRECTION('',(1.,0.,0.));+#12423 = DEFINITIONAL_REPRESENTATION('',(#12424),#12428);+#12424 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12425,#12426,#12427),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12425 = CARTESIAN_POINT('',(5.833333333333E-02,9.308268229167E-02));+#12426 = CARTESIAN_POINT('',(4.910481770833E-02,9.308268229167E-02));+#12427 = CARTESIAN_POINT('',(4.033203125E-02,9.097493489583E-02));+#12428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12429 = ORIENTED_EDGE('',*,*,#12430,.F.);+#12430 = EDGE_CURVE('',#5318,#12403,#12431,.T.);+#12431 = SURFACE_CURVE('',#12432,(#12436,#12443),.PCURVE_S1.);+#12432 = LINE('',#12433,#12434);+#12433 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,+ 1.6000001));+#12434 = VECTOR('',#12435,1.);+#12435 = DIRECTION('',(-0.,-0.,-1.));+#12436 = PCURVE('',#6055,#12437);+#12437 = DEFINITIONAL_REPRESENTATION('',(#12438),#12442);+#12438 = LINE('',#12439,#12440);+#12439 = CARTESIAN_POINT('',(1.,0.));+#12440 = VECTOR('',#12441,1.);+#12441 = DIRECTION('',(0.,-1.));+#12442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12443 = PCURVE('',#5337,#12444);+#12444 = DEFINITIONAL_REPRESENTATION('',(#12445),#12449);+#12445 = LINE('',#12446,#12447);+#12446 = CARTESIAN_POINT('',(0.,0.));+#12447 = VECTOR('',#12448,1.);+#12448 = DIRECTION('',(0.,-1.));+#12449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12450 = ADVANCED_FACE('',(#12451),#12418,.T.);+#12451 = FACE_BOUND('',#12452,.F.);+#12452 = EDGE_LOOP('',(#12453,#12478,#12501,#12524,#12547,#12570,#12593,+ #12616,#12639,#12662,#12685,#12708,#12731,#12754,#12777,#12800,+ #12823,#12846,#12869,#12892,#12913,#12914));+#12453 = ORIENTED_EDGE('',*,*,#12454,.T.);+#12454 = EDGE_CURVE('',#12455,#12457,#12459,.T.);+#12455 = VERTEX_POINT('',#12456);+#12456 = CARTESIAN_POINT('',(-4.66552734375E-02,3.873697916667E-03,+ 1.5000001));+#12457 = VERTEX_POINT('',#12458);+#12458 = CARTESIAN_POINT('',(-4.66552734375E-02,8.932291666667E-02,+ 1.5000001));+#12459 = SURFACE_CURVE('',#12460,(#12464,#12471),.PCURVE_S1.);+#12460 = LINE('',#12461,#12462);+#12461 = CARTESIAN_POINT('',(-4.66552734375E-02,3.873697916667E-03,+ 1.5000001));+#12462 = VECTOR('',#12463,1.);+#12463 = DIRECTION('',(0.,1.,0.));+#12464 = PCURVE('',#12418,#12465);+#12465 = DEFINITIONAL_REPRESENTATION('',(#12466),#12470);+#12466 = LINE('',#12467,#12468);+#12467 = CARTESIAN_POINT('',(2.3583984375E-02,8.465169270833E-02));+#12468 = VECTOR('',#12469,1.);+#12469 = DIRECTION('',(0.,1.));+#12470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12471 = PCURVE('',#5369,#12472);+#12472 = DEFINITIONAL_REPRESENTATION('',(#12473),#12477);+#12473 = LINE('',#12474,#12475);+#12474 = CARTESIAN_POINT('',(0.,-0.1));+#12475 = VECTOR('',#12476,1.);+#12476 = DIRECTION('',(1.,0.));+#12477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12478 = ORIENTED_EDGE('',*,*,#12479,.T.);+#12479 = EDGE_CURVE('',#12457,#12480,#12482,.T.);+#12480 = VERTEX_POINT('',#12481);+#12481 = CARTESIAN_POINT('',(3.94775390625E-02,8.932291666667E-02,+ 1.5000001));+#12482 = SURFACE_CURVE('',#12483,(#12487,#12494),.PCURVE_S1.);+#12483 = LINE('',#12484,#12485);+#12484 = CARTESIAN_POINT('',(-4.66552734375E-02,8.932291666667E-02,+ 1.5000001));+#12485 = VECTOR('',#12486,1.);+#12486 = DIRECTION('',(1.,0.,0.));+#12487 = PCURVE('',#12418,#12488);+#12488 = DEFINITIONAL_REPRESENTATION('',(#12489),#12493);+#12489 = LINE('',#12490,#12491);+#12490 = CARTESIAN_POINT('',(2.3583984375E-02,0.170100911458));+#12491 = VECTOR('',#12492,1.);+#12492 = DIRECTION('',(1.,0.));+#12493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12494 = PCURVE('',#5396,#12495);+#12495 = DEFINITIONAL_REPRESENTATION('',(#12496),#12500);+#12496 = LINE('',#12497,#12498);+#12497 = CARTESIAN_POINT('',(0.,-0.1));+#12498 = VECTOR('',#12499,1.);+#12499 = DIRECTION('',(1.,0.));+#12500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12501 = ORIENTED_EDGE('',*,*,#12502,.T.);+#12502 = EDGE_CURVE('',#12480,#12503,#12505,.T.);+#12503 = VERTEX_POINT('',#12504);+#12504 = CARTESIAN_POINT('',(3.94775390625E-02,6.995442708333E-02,+ 1.5000001));+#12505 = SURFACE_CURVE('',#12506,(#12510,#12517),.PCURVE_S1.);+#12506 = LINE('',#12507,#12508);+#12507 = CARTESIAN_POINT('',(3.94775390625E-02,8.932291666667E-02,+ 1.5000001));+#12508 = VECTOR('',#12509,1.);+#12509 = DIRECTION('',(0.,-1.,0.));+#12510 = PCURVE('',#12418,#12511);+#12511 = DEFINITIONAL_REPRESENTATION('',(#12512),#12516);+#12512 = LINE('',#12513,#12514);+#12513 = CARTESIAN_POINT('',(0.109716796875,0.170100911458));+#12514 = VECTOR('',#12515,1.);+#12515 = DIRECTION('',(0.,-1.));+#12516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12517 = PCURVE('',#5423,#12518);+#12518 = DEFINITIONAL_REPRESENTATION('',(#12519),#12523);+#12519 = LINE('',#12520,#12521);+#12520 = CARTESIAN_POINT('',(0.,-0.1));+#12521 = VECTOR('',#12522,1.);+#12522 = DIRECTION('',(1.,0.));+#12523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12524 = ORIENTED_EDGE('',*,*,#12525,.T.);+#12525 = EDGE_CURVE('',#12503,#12526,#12528,.T.);+#12526 = VERTEX_POINT('',#12527);+#12527 = CARTESIAN_POINT('',(-2.569173177083E-02,6.995442708333E-02,+ 1.5000001));+#12528 = SURFACE_CURVE('',#12529,(#12533,#12540),.PCURVE_S1.);+#12529 = LINE('',#12530,#12531);+#12530 = CARTESIAN_POINT('',(3.94775390625E-02,6.995442708333E-02,+ 1.5000001));+#12531 = VECTOR('',#12532,1.);+#12532 = DIRECTION('',(-1.,0.,0.));+#12533 = PCURVE('',#12418,#12534);+#12534 = DEFINITIONAL_REPRESENTATION('',(#12535),#12539);+#12535 = LINE('',#12536,#12537);+#12536 = CARTESIAN_POINT('',(0.109716796875,0.150732421875));+#12537 = VECTOR('',#12538,1.);+#12538 = DIRECTION('',(-1.,0.));+#12539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12540 = PCURVE('',#5450,#12541);+#12541 = DEFINITIONAL_REPRESENTATION('',(#12542),#12546);+#12542 = LINE('',#12543,#12544);+#12543 = CARTESIAN_POINT('',(0.,-0.1));+#12544 = VECTOR('',#12545,1.);+#12545 = DIRECTION('',(1.,0.));+#12546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12547 = ORIENTED_EDGE('',*,*,#12548,.T.);+#12548 = EDGE_CURVE('',#12526,#12549,#12551,.T.);+#12549 = VERTEX_POINT('',#12550);+#12550 = CARTESIAN_POINT('',(-2.569173177083E-02,2.814127604167E-02,+ 1.5000001));+#12551 = SURFACE_CURVE('',#12552,(#12556,#12563),.PCURVE_S1.);+#12552 = LINE('',#12553,#12554);+#12553 = CARTESIAN_POINT('',(-2.569173177083E-02,6.995442708333E-02,+ 1.5000001));+#12554 = VECTOR('',#12555,1.);+#12555 = DIRECTION('',(0.,-1.,0.));+#12556 = PCURVE('',#12418,#12557);+#12557 = DEFINITIONAL_REPRESENTATION('',(#12558),#12562);+#12558 = LINE('',#12559,#12560);+#12559 = CARTESIAN_POINT('',(4.454752604167E-02,0.150732421875));+#12560 = VECTOR('',#12561,1.);+#12561 = DIRECTION('',(0.,-1.));+#12562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12563 = PCURVE('',#5477,#12564);+#12564 = DEFINITIONAL_REPRESENTATION('',(#12565),#12569);+#12565 = LINE('',#12566,#12567);+#12566 = CARTESIAN_POINT('',(0.,-0.1));+#12567 = VECTOR('',#12568,1.);+#12568 = DIRECTION('',(1.,0.));+#12569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12570 = ORIENTED_EDGE('',*,*,#12571,.T.);+#12571 = EDGE_CURVE('',#12549,#12572,#12574,.T.);+#12572 = VERTEX_POINT('',#12573);+#12573 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,+ 1.5000001));+#12574 = SURFACE_CURVE('',#12575,(#12579,#12586),.PCURVE_S1.);+#12575 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12576,#12577,#12578),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12576 = CARTESIAN_POINT('',(-2.569173177083E-02,2.814127604167E-02,+ 1.5000001));+#12577 = CARTESIAN_POINT('',(-2.079264322917E-02,2.996419270833E-02,+ 1.5000001));+#12578 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,+ 1.5000001));+#12579 = PCURVE('',#12418,#12580);+#12580 = DEFINITIONAL_REPRESENTATION('',(#12581),#12585);+#12581 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12582,#12583,#12584),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12582 = CARTESIAN_POINT('',(4.454752604167E-02,0.108919270833));+#12583 = CARTESIAN_POINT('',(4.944661458333E-02,0.1107421875));+#12584 = CARTESIAN_POINT('',(5.440266927083E-02,0.111596679688));+#12585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12586 = PCURVE('',#5508,#12587);+#12587 = DEFINITIONAL_REPRESENTATION('',(#12588),#12592);+#12588 = LINE('',#12589,#12590);+#12589 = CARTESIAN_POINT('',(0.,-0.1));+#12590 = VECTOR('',#12591,1.);+#12591 = DIRECTION('',(1.,0.));+#12592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12593 = ORIENTED_EDGE('',*,*,#12594,.T.);+#12594 = EDGE_CURVE('',#12572,#12595,#12597,.T.);+#12595 = VERTEX_POINT('',#12596);+#12596 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,+ 1.5000001));+#12597 = SURFACE_CURVE('',#12598,(#12602,#12609),.PCURVE_S1.);+#12598 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12599,#12600,#12601),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12599 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,+ 1.5000001));+#12600 = CARTESIAN_POINT('',(-1.088053385417E-02,3.167317708333E-02,+ 1.5000001));+#12601 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,+ 1.5000001));+#12602 = PCURVE('',#12418,#12603);+#12603 = DEFINITIONAL_REPRESENTATION('',(#12604),#12608);+#12604 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12605,#12606,#12607),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12605 = CARTESIAN_POINT('',(5.440266927083E-02,0.111596679688));+#12606 = CARTESIAN_POINT('',(5.935872395833E-02,0.112451171875));+#12607 = CARTESIAN_POINT('',(6.437174479167E-02,0.112451171875));+#12608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12609 = PCURVE('',#5544,#12610);+#12610 = DEFINITIONAL_REPRESENTATION('',(#12611),#12615);+#12611 = LINE('',#12612,#12613);+#12612 = CARTESIAN_POINT('',(0.,-0.1));+#12613 = VECTOR('',#12614,1.);+#12614 = DIRECTION('',(1.,0.));+#12615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12616 = ORIENTED_EDGE('',*,*,#12617,.T.);+#12617 = EDGE_CURVE('',#12595,#12618,#12620,.T.);+#12618 = VERTEX_POINT('',#12619);+#12619 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,+ 1.5000001));+#12620 = SURFACE_CURVE('',#12621,(#12625,#12632),.PCURVE_S1.);+#12621 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12622,#12623,#12624),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12622 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,+ 1.5000001));+#12623 = CARTESIAN_POINT('',(2.056477864583E-02,3.167317708333E-02,+ 1.5000001));+#12624 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,+ 1.5000001));+#12625 = PCURVE('',#12418,#12626);+#12626 = DEFINITIONAL_REPRESENTATION('',(#12627),#12631);+#12627 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12628,#12629,#12630),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12628 = CARTESIAN_POINT('',(6.437174479167E-02,0.112451171875));+#12629 = CARTESIAN_POINT('',(9.080403645833E-02,0.112451171875));+#12630 = CARTESIAN_POINT('',(0.106298828125,9.684244791667E-02));+#12631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12632 = PCURVE('',#5586,#12633);+#12633 = DEFINITIONAL_REPRESENTATION('',(#12634),#12638);+#12634 = LINE('',#12635,#12636);+#12635 = CARTESIAN_POINT('',(0.,-0.1));+#12636 = VECTOR('',#12637,1.);+#12637 = DIRECTION('',(1.,0.));+#12638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12639 = ORIENTED_EDGE('',*,*,#12640,.T.);+#12640 = EDGE_CURVE('',#12618,#12641,#12643,.T.);+#12641 = VERTEX_POINT('',#12642);+#12642 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,+ 1.5000001));+#12643 = SURFACE_CURVE('',#12644,(#12648,#12655),.PCURVE_S1.);+#12644 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12645,#12646,#12647),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12645 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,+ 1.5000001));+#12646 = CARTESIAN_POINT('',(5.155436197917E-02,4.557291666667E-04,+ 1.5000001));+#12647 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,+ 1.5000001));+#12648 = PCURVE('',#12418,#12649);+#12649 = DEFINITIONAL_REPRESENTATION('',(#12650),#12654);+#12650 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12651,#12652,#12653),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12651 = CARTESIAN_POINT('',(0.106298828125,9.684244791667E-02));+#12652 = CARTESIAN_POINT('',(0.121793619792,8.123372395833E-02));+#12653 = CARTESIAN_POINT('',(0.121793619792,5.457356770833E-02));+#12654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12655 = PCURVE('',#5625,#12656);+#12656 = DEFINITIONAL_REPRESENTATION('',(#12657),#12661);+#12657 = LINE('',#12658,#12659);+#12658 = CARTESIAN_POINT('',(0.,-0.1));+#12659 = VECTOR('',#12660,1.);+#12660 = DIRECTION('',(1.,0.));+#12661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12662 = ORIENTED_EDGE('',*,*,#12663,.T.);+#12663 = EDGE_CURVE('',#12641,#12664,#12666,.T.);+#12664 = VERTEX_POINT('',#12665);+#12665 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,+ 1.5000001));+#12666 = SURFACE_CURVE('',#12667,(#12671,#12678),.PCURVE_S1.);+#12667 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12668,#12669,#12670),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12668 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,+ 1.5000001));+#12669 = CARTESIAN_POINT('',(5.155436197917E-02,-5.309244791667E-02,+ 1.5000001));+#12670 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,+ 1.5000001));+#12671 = PCURVE('',#12418,#12672);+#12672 = DEFINITIONAL_REPRESENTATION('',(#12673),#12677);+#12673 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12674,#12675,#12676),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12674 = CARTESIAN_POINT('',(0.121793619792,5.457356770833E-02));+#12675 = CARTESIAN_POINT('',(0.121793619792,2.7685546875E-02));+#12676 = CARTESIAN_POINT('',(0.105558268229,1.219075520833E-02));+#12677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12678 = PCURVE('',#5667,#12679);+#12679 = DEFINITIONAL_REPRESENTATION('',(#12680),#12684);+#12680 = LINE('',#12681,#12682);+#12681 = CARTESIAN_POINT('',(0.,-0.1));+#12682 = VECTOR('',#12683,1.);+#12683 = DIRECTION('',(1.,0.));+#12684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12685 = ORIENTED_EDGE('',*,*,#12686,.T.);+#12686 = EDGE_CURVE('',#12664,#12687,#12689,.T.);+#12687 = VERTEX_POINT('',#12688);+#12688 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,+ 1.5000001));+#12689 = SURFACE_CURVE('',#12690,(#12694,#12701),.PCURVE_S1.);+#12690 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12691,#12692,#12693),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12691 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,+ 1.5000001));+#12692 = CARTESIAN_POINT('',(1.908365885417E-02,-8.408203125E-02,+ 1.5000001));+#12693 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,+ 1.5000001));+#12694 = PCURVE('',#12418,#12695);+#12695 = DEFINITIONAL_REPRESENTATION('',(#12696),#12700);+#12696 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12697,#12698,#12699),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12697 = CARTESIAN_POINT('',(0.105558268229,1.219075520833E-02));+#12698 = CARTESIAN_POINT('',(8.932291666667E-02,-3.304036458333E-03));+#12699 = CARTESIAN_POINT('',(6.1181640625E-02,-3.304036458333E-03));+#12700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12701 = PCURVE('',#5706,#12702);+#12702 = DEFINITIONAL_REPRESENTATION('',(#12703),#12707);+#12703 = LINE('',#12704,#12705);+#12704 = CARTESIAN_POINT('',(0.,-0.1));+#12705 = VECTOR('',#12706,1.);+#12706 = DIRECTION('',(1.,0.));+#12707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12708 = ORIENTED_EDGE('',*,*,#12709,.T.);+#12709 = EDGE_CURVE('',#12687,#12710,#12712,.T.);+#12710 = VERTEX_POINT('',#12711);+#12711 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,+ 1.5000001));+#12712 = SURFACE_CURVE('',#12713,(#12717,#12724),.PCURVE_S1.);+#12713 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12714,#12715,#12716),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12714 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,+ 1.5000001));+#12715 = CARTESIAN_POINT('',(-2.261555989583E-02,-8.408203125E-02,+ 1.5000001));+#12716 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,+ 1.5000001));+#12717 = PCURVE('',#12418,#12718);+#12718 = DEFINITIONAL_REPRESENTATION('',(#12719),#12723);+#12719 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12720,#12721,#12722),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12720 = CARTESIAN_POINT('',(6.1181640625E-02,-3.304036458333E-03));+#12721 = CARTESIAN_POINT('',(4.762369791667E-02,-3.304036458333E-03));+#12722 = CARTESIAN_POINT('',(3.64013671875E-02,-1.481119791667E-03));+#12723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12724 = PCURVE('',#5742,#12725);+#12725 = DEFINITIONAL_REPRESENTATION('',(#12726),#12730);+#12726 = LINE('',#12727,#12728);+#12727 = CARTESIAN_POINT('',(0.,-0.1));+#12728 = VECTOR('',#12729,1.);+#12729 = DIRECTION('',(1.,0.));+#12730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12731 = ORIENTED_EDGE('',*,*,#12732,.T.);+#12732 = EDGE_CURVE('',#12710,#12733,#12735,.T.);+#12733 = VERTEX_POINT('',#12734);+#12734 = CARTESIAN_POINT('',(-5.394694010417E-02,-7.679036458333E-02,+ 1.5000001));+#12735 = SURFACE_CURVE('',#12736,(#12740,#12747),.PCURVE_S1.);+#12736 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12737,#12738,#12739),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12737 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,+ 1.5000001));+#12738 = CARTESIAN_POINT('',(-4.506022135417E-02,-8.043619791667E-02,+ 1.5000001));+#12739 = CARTESIAN_POINT('',(-5.394694010417E-02,-7.679036458333E-02,+ 1.5000001));+#12740 = PCURVE('',#12418,#12741);+#12741 = DEFINITIONAL_REPRESENTATION('',(#12742),#12746);+#12742 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12743,#12744,#12745),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12743 = CARTESIAN_POINT('',(3.64013671875E-02,-1.481119791667E-03));+#12744 = CARTESIAN_POINT('',(2.517903645833E-02,3.41796875E-04));+#12745 = CARTESIAN_POINT('',(1.629231770833E-02,3.987630208333E-03));+#12746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12747 = PCURVE('',#5778,#12748);+#12748 = DEFINITIONAL_REPRESENTATION('',(#12749),#12753);+#12749 = LINE('',#12750,#12751);+#12750 = CARTESIAN_POINT('',(0.,-0.1));+#12751 = VECTOR('',#12752,1.);+#12752 = DIRECTION('',(1.,0.));+#12753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12754 = ORIENTED_EDGE('',*,*,#12755,.T.);+#12755 = EDGE_CURVE('',#12733,#12756,#12758,.T.);+#12756 = VERTEX_POINT('',#12757);+#12757 = CARTESIAN_POINT('',(-5.394694010417E-02,-5.343424479167E-02,+ 1.5000001));+#12758 = SURFACE_CURVE('',#12759,(#12763,#12770),.PCURVE_S1.);+#12759 = LINE('',#12760,#12761);+#12760 = CARTESIAN_POINT('',(-5.394694010417E-02,-7.679036458333E-02,+ 1.5000001));+#12761 = VECTOR('',#12762,1.);+#12762 = DIRECTION('',(0.,1.,0.));+#12763 = PCURVE('',#12418,#12764);+#12764 = DEFINITIONAL_REPRESENTATION('',(#12765),#12769);+#12765 = LINE('',#12766,#12767);+#12766 = CARTESIAN_POINT('',(1.629231770833E-02,3.987630208333E-03));+#12767 = VECTOR('',#12768,1.);+#12768 = DIRECTION('',(0.,1.));+#12769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12770 = PCURVE('',#5810,#12771);+#12771 = DEFINITIONAL_REPRESENTATION('',(#12772),#12776);+#12772 = LINE('',#12773,#12774);+#12773 = CARTESIAN_POINT('',(0.,-0.1));+#12774 = VECTOR('',#12775,1.);+#12775 = DIRECTION('',(1.,0.));+#12776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12777 = ORIENTED_EDGE('',*,*,#12778,.T.);+#12778 = EDGE_CURVE('',#12756,#12779,#12781,.T.);+#12779 = VERTEX_POINT('',#12780);+#12780 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,+ 1.5000001));+#12781 = SURFACE_CURVE('',#12782,(#12786,#12793),.PCURVE_S1.);+#12782 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12783,#12784,#12785),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12783 = CARTESIAN_POINT('',(-5.394694010417E-02,-5.343424479167E-02,+ 1.5000001));+#12784 = CARTESIAN_POINT('',(-4.346516927083E-02,-5.9130859375E-02,+ 1.5000001));+#12785 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,+ 1.5000001));+#12786 = PCURVE('',#12418,#12787);+#12787 = DEFINITIONAL_REPRESENTATION('',(#12788),#12792);+#12788 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12789,#12790,#12791),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12789 = CARTESIAN_POINT('',(1.629231770833E-02,2.734375E-02));+#12790 = CARTESIAN_POINT('',(2.677408854167E-02,2.164713541667E-02));+#12791 = CARTESIAN_POINT('',(3.736979166667E-02,1.885579427083E-02));+#12792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12793 = PCURVE('',#5841,#12794);+#12794 = DEFINITIONAL_REPRESENTATION('',(#12795),#12799);+#12795 = LINE('',#12796,#12797);+#12796 = CARTESIAN_POINT('',(0.,-0.1));+#12797 = VECTOR('',#12798,1.);+#12798 = DIRECTION('',(1.,0.));+#12799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12800 = ORIENTED_EDGE('',*,*,#12801,.T.);+#12801 = EDGE_CURVE('',#12779,#12802,#12804,.T.);+#12802 = VERTEX_POINT('',#12803);+#12803 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,+ 1.5000001));+#12804 = SURFACE_CURVE('',#12805,(#12809,#12816),.PCURVE_S1.);+#12805 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12806,#12807,#12808),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12806 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,+ 1.5000001));+#12807 = CARTESIAN_POINT('',(-2.227376302083E-02,-6.471354166667E-02,+ 1.5000001));+#12808 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,+ 1.5000001));+#12809 = PCURVE('',#12418,#12810);+#12810 = DEFINITIONAL_REPRESENTATION('',(#12811),#12815);+#12811 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12812,#12813,#12814),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12812 = CARTESIAN_POINT('',(3.736979166667E-02,1.885579427083E-02));+#12813 = CARTESIAN_POINT('',(4.796549479167E-02,1.6064453125E-02));+#12814 = CARTESIAN_POINT('',(5.901692708333E-02,1.6064453125E-02));+#12815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12816 = PCURVE('',#5877,#12817);+#12817 = DEFINITIONAL_REPRESENTATION('',(#12818),#12822);+#12818 = LINE('',#12819,#12820);+#12819 = CARTESIAN_POINT('',(0.,-0.1));+#12820 = VECTOR('',#12821,1.);+#12821 = DIRECTION('',(1.,0.));+#12822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12823 = ORIENTED_EDGE('',*,*,#12824,.T.);+#12824 = EDGE_CURVE('',#12802,#12825,#12827,.T.);+#12825 = VERTEX_POINT('',#12826);+#12826 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.5000001));+#12827 = SURFACE_CURVE('',#12828,(#12832,#12839),.PCURVE_S1.);+#12828 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12829,#12830,#12831),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12829 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,+ 1.5000001));+#12830 = CARTESIAN_POINT('',(7.804361979167E-03,-6.471354166667E-02,+ 1.5000001));+#12831 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.5000001));+#12832 = PCURVE('',#12418,#12833);+#12833 = DEFINITIONAL_REPRESENTATION('',(#12834),#12838);+#12834 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12835,#12836,#12837),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12835 = CARTESIAN_POINT('',(5.901692708333E-02,1.6064453125E-02));+#12836 = CARTESIAN_POINT('',(7.804361979167E-02,1.6064453125E-02));+#12837 = CARTESIAN_POINT('',(8.83544921875E-02,2.609049479167E-02));+#12838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12839 = PCURVE('',#5913,#12840);+#12840 = DEFINITIONAL_REPRESENTATION('',(#12841),#12845);+#12841 = LINE('',#12842,#12843);+#12842 = CARTESIAN_POINT('',(0.,-0.1));+#12843 = VECTOR('',#12844,1.);+#12844 = DIRECTION('',(1.,0.));+#12845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12846 = ORIENTED_EDGE('',*,*,#12847,.T.);+#12847 = EDGE_CURVE('',#12825,#12848,#12850,.T.);+#12848 = VERTEX_POINT('',#12849);+#12849 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,+ 1.5000001));+#12850 = SURFACE_CURVE('',#12851,(#12855,#12862),.PCURVE_S1.);+#12851 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12852,#12853,#12854),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12852 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.5000001));+#12853 = CARTESIAN_POINT('',(2.842610677083E-02,-4.466145833333E-02,+ 1.5000001));+#12854 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,+ 1.5000001));+#12855 = PCURVE('',#12418,#12856);+#12856 = DEFINITIONAL_REPRESENTATION('',(#12857),#12861);+#12857 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12858,#12859,#12860),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12858 = CARTESIAN_POINT('',(8.83544921875E-02,2.609049479167E-02));+#12859 = CARTESIAN_POINT('',(9.866536458333E-02,3.611653645833E-02));+#12860 = CARTESIAN_POINT('',(9.866536458333E-02,5.457356770833E-02));+#12861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12862 = PCURVE('',#5949,#12863);+#12863 = DEFINITIONAL_REPRESENTATION('',(#12864),#12868);+#12864 = LINE('',#12865,#12866);+#12865 = CARTESIAN_POINT('',(0.,-0.1));+#12866 = VECTOR('',#12867,1.);+#12867 = DIRECTION('',(1.,0.));+#12868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12869 = ORIENTED_EDGE('',*,*,#12870,.T.);+#12870 = EDGE_CURVE('',#12848,#12871,#12873,.T.);+#12871 = VERTEX_POINT('',#12872);+#12872 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.5000001+ ));+#12873 = SURFACE_CURVE('',#12874,(#12878,#12885),.PCURVE_S1.);+#12874 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12875,#12876,#12877),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12875 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,+ 1.5000001));+#12876 = CARTESIAN_POINT('',(2.842610677083E-02,-7.975260416667E-03,+ 1.5000001));+#12877 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.5000001+ ));+#12878 = PCURVE('',#12418,#12879);+#12879 = DEFINITIONAL_REPRESENTATION('',(#12880),#12884);+#12880 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12881,#12882,#12883),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12881 = CARTESIAN_POINT('',(9.866536458333E-02,5.457356770833E-02));+#12882 = CARTESIAN_POINT('',(9.866536458333E-02,7.2802734375E-02));+#12883 = CARTESIAN_POINT('',(8.80126953125E-02,8.294270833333E-02));+#12884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12885 = PCURVE('',#5985,#12886);+#12886 = DEFINITIONAL_REPRESENTATION('',(#12887),#12891);+#12887 = LINE('',#12888,#12889);+#12888 = CARTESIAN_POINT('',(0.,-0.1));+#12889 = VECTOR('',#12890,1.);+#12890 = DIRECTION('',(1.,0.));+#12891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12892 = ORIENTED_EDGE('',*,*,#12893,.T.);+#12893 = EDGE_CURVE('',#12871,#12380,#12894,.T.);+#12894 = SURFACE_CURVE('',#12895,(#12899,#12906),.PCURVE_S1.);+#12895 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12896,#12897,#12898),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12896 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.5000001+ ));+#12897 = CARTESIAN_POINT('',(7.120768229167E-03,1.23046875E-02,1.5000001+ ));+#12898 = CARTESIAN_POINT('',(-1.190592447917E-02,1.23046875E-02,+ 1.5000001));+#12899 = PCURVE('',#12418,#12900);+#12900 = DEFINITIONAL_REPRESENTATION('',(#12901),#12905);+#12901 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12902,#12903,#12904),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12902 = CARTESIAN_POINT('',(8.80126953125E-02,8.294270833333E-02));+#12903 = CARTESIAN_POINT('',(7.736002604167E-02,9.308268229167E-02));+#12904 = CARTESIAN_POINT('',(5.833333333333E-02,9.308268229167E-02));+#12905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12906 = PCURVE('',#6021,#12907);+#12907 = DEFINITIONAL_REPRESENTATION('',(#12908),#12912);+#12908 = LINE('',#12909,#12910);+#12909 = CARTESIAN_POINT('',(0.,-0.1));+#12910 = VECTOR('',#12911,1.);+#12911 = DIRECTION('',(1.,0.));+#12912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12913 = ORIENTED_EDGE('',*,*,#12402,.T.);+#12914 = ORIENTED_EDGE('',*,*,#12915,.T.);+#12915 = EDGE_CURVE('',#12403,#12455,#12916,.T.);+#12916 = SURFACE_CURVE('',#12917,(#12921,#12928),.PCURVE_S1.);+#12917 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12918,#12919,#12920),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12918 = CARTESIAN_POINT('',(-2.99072265625E-02,1.019694010417E-02,+ 1.5000001));+#12919 = CARTESIAN_POINT('',(-3.868001302083E-02,8.089192708333E-03,+ 1.5000001));+#12920 = CARTESIAN_POINT('',(-4.66552734375E-02,3.873697916667E-03,+ 1.5000001));+#12921 = PCURVE('',#12418,#12922);+#12922 = DEFINITIONAL_REPRESENTATION('',(#12923),#12927);+#12923 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#12924,#12925,#12926),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#12924 = CARTESIAN_POINT('',(4.033203125E-02,9.097493489583E-02));+#12925 = CARTESIAN_POINT('',(3.155924479167E-02,8.88671875E-02));+#12926 = CARTESIAN_POINT('',(2.3583984375E-02,8.465169270833E-02));+#12927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12928 = PCURVE('',#5337,#12929);+#12929 = DEFINITIONAL_REPRESENTATION('',(#12930),#12934);+#12930 = LINE('',#12931,#12932);+#12931 = CARTESIAN_POINT('',(0.,-0.1));+#12932 = VECTOR('',#12933,1.);+#12933 = DIRECTION('',(1.,0.));+#12934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12935 = ADVANCED_FACE('',(#12936),#6021,.T.);+#12936 = FACE_BOUND('',#12937,.T.);+#12937 = EDGE_LOOP('',(#12938,#12939,#12960,#12961));+#12938 = ORIENTED_EDGE('',*,*,#6001,.T.);+#12939 = ORIENTED_EDGE('',*,*,#12940,.T.);+#12940 = EDGE_CURVE('',#5966,#12871,#12941,.T.);+#12941 = SURFACE_CURVE('',#12942,(#12946,#12953),.PCURVE_S1.);+#12942 = LINE('',#12943,#12944);+#12943 = CARTESIAN_POINT('',(1.77734375E-02,2.164713541667E-03,1.6000001+ ));+#12944 = VECTOR('',#12945,1.);+#12945 = DIRECTION('',(-0.,-0.,-1.));+#12946 = PCURVE('',#6021,#12947);+#12947 = DEFINITIONAL_REPRESENTATION('',(#12948),#12952);+#12948 = LINE('',#12949,#12950);+#12949 = CARTESIAN_POINT('',(0.,0.));+#12950 = VECTOR('',#12951,1.);+#12951 = DIRECTION('',(0.,-1.));+#12952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12953 = PCURVE('',#5985,#12954);+#12954 = DEFINITIONAL_REPRESENTATION('',(#12955),#12959);+#12955 = LINE('',#12956,#12957);+#12956 = CARTESIAN_POINT('',(1.,0.));+#12957 = VECTOR('',#12958,1.);+#12958 = DIRECTION('',(0.,-1.));+#12959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12960 = ORIENTED_EDGE('',*,*,#12893,.T.);+#12961 = ORIENTED_EDGE('',*,*,#12379,.F.);+#12962 = ADVANCED_FACE('',(#12963),#5985,.T.);+#12963 = FACE_BOUND('',#12964,.T.);+#12964 = EDGE_LOOP('',(#12965,#12966,#12987,#12988));+#12965 = ORIENTED_EDGE('',*,*,#5965,.T.);+#12966 = ORIENTED_EDGE('',*,*,#12967,.T.);+#12967 = EDGE_CURVE('',#5930,#12848,#12968,.T.);+#12968 = SURFACE_CURVE('',#12969,(#12973,#12980),.PCURVE_S1.);+#12969 = LINE('',#12970,#12971);+#12970 = CARTESIAN_POINT('',(2.842610677083E-02,-2.620442708333E-02,+ 1.6000001));+#12971 = VECTOR('',#12972,1.);+#12972 = DIRECTION('',(-0.,-0.,-1.));+#12973 = PCURVE('',#5985,#12974);+#12974 = DEFINITIONAL_REPRESENTATION('',(#12975),#12979);+#12975 = LINE('',#12976,#12977);+#12976 = CARTESIAN_POINT('',(0.,0.));+#12977 = VECTOR('',#12978,1.);+#12978 = DIRECTION('',(0.,-1.));+#12979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12980 = PCURVE('',#5949,#12981);+#12981 = DEFINITIONAL_REPRESENTATION('',(#12982),#12986);+#12982 = LINE('',#12983,#12984);+#12983 = CARTESIAN_POINT('',(1.,0.));+#12984 = VECTOR('',#12985,1.);+#12985 = DIRECTION('',(0.,-1.));+#12986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#12987 = ORIENTED_EDGE('',*,*,#12870,.T.);+#12988 = ORIENTED_EDGE('',*,*,#12940,.F.);+#12989 = ADVANCED_FACE('',(#12990),#5949,.T.);+#12990 = FACE_BOUND('',#12991,.T.);+#12991 = EDGE_LOOP('',(#12992,#12993,#13014,#13015));+#12992 = ORIENTED_EDGE('',*,*,#5929,.T.);+#12993 = ORIENTED_EDGE('',*,*,#12994,.T.);+#12994 = EDGE_CURVE('',#5894,#12825,#12995,.T.);+#12995 = SURFACE_CURVE('',#12996,(#13000,#13007),.PCURVE_S1.);+#12996 = LINE('',#12997,#12998);+#12997 = CARTESIAN_POINT('',(1.8115234375E-02,-5.46875E-02,1.6000001));+#12998 = VECTOR('',#12999,1.);+#12999 = DIRECTION('',(-0.,-0.,-1.));+#13000 = PCURVE('',#5949,#13001);+#13001 = DEFINITIONAL_REPRESENTATION('',(#13002),#13006);+#13002 = LINE('',#13003,#13004);+#13003 = CARTESIAN_POINT('',(0.,0.));+#13004 = VECTOR('',#13005,1.);+#13005 = DIRECTION('',(0.,-1.));+#13006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13007 = PCURVE('',#5913,#13008);+#13008 = DEFINITIONAL_REPRESENTATION('',(#13009),#13013);+#13009 = LINE('',#13010,#13011);+#13010 = CARTESIAN_POINT('',(1.,0.));+#13011 = VECTOR('',#13012,1.);+#13012 = DIRECTION('',(0.,-1.));+#13013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13014 = ORIENTED_EDGE('',*,*,#12847,.T.);+#13015 = ORIENTED_EDGE('',*,*,#12967,.F.);+#13016 = ADVANCED_FACE('',(#13017),#5913,.T.);+#13017 = FACE_BOUND('',#13018,.T.);+#13018 = EDGE_LOOP('',(#13019,#13020,#13041,#13042));+#13019 = ORIENTED_EDGE('',*,*,#5893,.T.);+#13020 = ORIENTED_EDGE('',*,*,#13021,.T.);+#13021 = EDGE_CURVE('',#5858,#12802,#13022,.T.);+#13022 = SURFACE_CURVE('',#13023,(#13027,#13034),.PCURVE_S1.);+#13023 = LINE('',#13024,#13025);+#13024 = CARTESIAN_POINT('',(-1.122233072917E-02,-6.471354166667E-02,+ 1.6000001));+#13025 = VECTOR('',#13026,1.);+#13026 = DIRECTION('',(-0.,-0.,-1.));+#13027 = PCURVE('',#5913,#13028);+#13028 = DEFINITIONAL_REPRESENTATION('',(#13029),#13033);+#13029 = LINE('',#13030,#13031);+#13030 = CARTESIAN_POINT('',(0.,0.));+#13031 = VECTOR('',#13032,1.);+#13032 = DIRECTION('',(0.,-1.));+#13033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13034 = PCURVE('',#5877,#13035);+#13035 = DEFINITIONAL_REPRESENTATION('',(#13036),#13040);+#13036 = LINE('',#13037,#13038);+#13037 = CARTESIAN_POINT('',(1.,0.));+#13038 = VECTOR('',#13039,1.);+#13039 = DIRECTION('',(0.,-1.));+#13040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13041 = ORIENTED_EDGE('',*,*,#12824,.T.);+#13042 = ORIENTED_EDGE('',*,*,#12994,.F.);+#13043 = ADVANCED_FACE('',(#13044),#5877,.T.);+#13044 = FACE_BOUND('',#13045,.T.);+#13045 = EDGE_LOOP('',(#13046,#13047,#13068,#13069));+#13046 = ORIENTED_EDGE('',*,*,#5857,.T.);+#13047 = ORIENTED_EDGE('',*,*,#13048,.T.);+#13048 = EDGE_CURVE('',#5822,#12779,#13049,.T.);+#13049 = SURFACE_CURVE('',#13050,(#13054,#13061),.PCURVE_S1.);+#13050 = LINE('',#13051,#13052);+#13051 = CARTESIAN_POINT('',(-3.286946614583E-02,-6.192220052083E-02,+ 1.6000001));+#13052 = VECTOR('',#13053,1.);+#13053 = DIRECTION('',(-0.,-0.,-1.));+#13054 = PCURVE('',#5877,#13055);+#13055 = DEFINITIONAL_REPRESENTATION('',(#13056),#13060);+#13056 = LINE('',#13057,#13058);+#13057 = CARTESIAN_POINT('',(0.,0.));+#13058 = VECTOR('',#13059,1.);+#13059 = DIRECTION('',(0.,-1.));+#13060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13061 = PCURVE('',#5841,#13062);+#13062 = DEFINITIONAL_REPRESENTATION('',(#13063),#13067);+#13063 = LINE('',#13064,#13065);+#13064 = CARTESIAN_POINT('',(1.,0.));+#13065 = VECTOR('',#13066,1.);+#13066 = DIRECTION('',(0.,-1.));+#13067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13068 = ORIENTED_EDGE('',*,*,#12801,.T.);+#13069 = ORIENTED_EDGE('',*,*,#13021,.F.);+#13070 = ADVANCED_FACE('',(#13071),#5841,.T.);+#13071 = FACE_BOUND('',#13072,.T.);+#13072 = EDGE_LOOP('',(#13073,#13074,#13095,#13096));+#13073 = ORIENTED_EDGE('',*,*,#5821,.T.);+#13074 = ORIENTED_EDGE('',*,*,#13075,.T.);+#13075 = EDGE_CURVE('',#5795,#12756,#13076,.T.);+#13076 = SURFACE_CURVE('',#13077,(#13081,#13088),.PCURVE_S1.);+#13077 = LINE('',#13078,#13079);+#13078 = CARTESIAN_POINT('',(-5.394694010417E-02,-5.343424479167E-02,+ 1.6000001));+#13079 = VECTOR('',#13080,1.);+#13080 = DIRECTION('',(-0.,-0.,-1.));+#13081 = PCURVE('',#5841,#13082);+#13082 = DEFINITIONAL_REPRESENTATION('',(#13083),#13087);+#13083 = LINE('',#13084,#13085);+#13084 = CARTESIAN_POINT('',(0.,0.));+#13085 = VECTOR('',#13086,1.);+#13086 = DIRECTION('',(0.,-1.));+#13087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13088 = PCURVE('',#5810,#13089);+#13089 = DEFINITIONAL_REPRESENTATION('',(#13090),#13094);+#13090 = LINE('',#13091,#13092);+#13091 = CARTESIAN_POINT('',(2.335611979167E-02,0.));+#13092 = VECTOR('',#13093,1.);+#13093 = DIRECTION('',(0.,-1.));+#13094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13095 = ORIENTED_EDGE('',*,*,#12778,.T.);+#13096 = ORIENTED_EDGE('',*,*,#13048,.F.);+#13097 = ADVANCED_FACE('',(#13098),#5810,.T.);+#13098 = FACE_BOUND('',#13099,.T.);+#13099 = EDGE_LOOP('',(#13100,#13101,#13122,#13123));+#13100 = ORIENTED_EDGE('',*,*,#5794,.F.);+#13101 = ORIENTED_EDGE('',*,*,#13102,.T.);+#13102 = EDGE_CURVE('',#5759,#12733,#13103,.T.);+#13103 = SURFACE_CURVE('',#13104,(#13108,#13115),.PCURVE_S1.);+#13104 = LINE('',#13105,#13106);+#13105 = CARTESIAN_POINT('',(-5.394694010417E-02,-7.679036458333E-02,+ 1.6000001));+#13106 = VECTOR('',#13107,1.);+#13107 = DIRECTION('',(-0.,-0.,-1.));+#13108 = PCURVE('',#5810,#13109);+#13109 = DEFINITIONAL_REPRESENTATION('',(#13110),#13114);+#13110 = LINE('',#13111,#13112);+#13111 = CARTESIAN_POINT('',(0.,0.));+#13112 = VECTOR('',#13113,1.);+#13113 = DIRECTION('',(0.,-1.));+#13114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13115 = PCURVE('',#5778,#13116);+#13116 = DEFINITIONAL_REPRESENTATION('',(#13117),#13121);+#13117 = LINE('',#13118,#13119);+#13118 = CARTESIAN_POINT('',(1.,0.));+#13119 = VECTOR('',#13120,1.);+#13120 = DIRECTION('',(0.,-1.));+#13121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13122 = ORIENTED_EDGE('',*,*,#12755,.T.);+#13123 = ORIENTED_EDGE('',*,*,#13075,.F.);+#13124 = ADVANCED_FACE('',(#13125),#5778,.T.);+#13125 = FACE_BOUND('',#13126,.T.);+#13126 = EDGE_LOOP('',(#13127,#13128,#13149,#13150));+#13127 = ORIENTED_EDGE('',*,*,#5758,.T.);+#13128 = ORIENTED_EDGE('',*,*,#13129,.T.);+#13129 = EDGE_CURVE('',#5723,#12710,#13130,.T.);+#13130 = SURFACE_CURVE('',#13131,(#13135,#13142),.PCURVE_S1.);+#13131 = LINE('',#13132,#13133);+#13132 = CARTESIAN_POINT('',(-3.3837890625E-02,-8.225911458333E-02,+ 1.6000001));+#13133 = VECTOR('',#13134,1.);+#13134 = DIRECTION('',(-0.,-0.,-1.));+#13135 = PCURVE('',#5778,#13136);+#13136 = DEFINITIONAL_REPRESENTATION('',(#13137),#13141);+#13137 = LINE('',#13138,#13139);+#13138 = CARTESIAN_POINT('',(0.,0.));+#13139 = VECTOR('',#13140,1.);+#13140 = DIRECTION('',(0.,-1.));+#13141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13142 = PCURVE('',#5742,#13143);+#13143 = DEFINITIONAL_REPRESENTATION('',(#13144),#13148);+#13144 = LINE('',#13145,#13146);+#13145 = CARTESIAN_POINT('',(1.,0.));+#13146 = VECTOR('',#13147,1.);+#13147 = DIRECTION('',(0.,-1.));+#13148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13149 = ORIENTED_EDGE('',*,*,#12732,.T.);+#13150 = ORIENTED_EDGE('',*,*,#13102,.F.);+#13151 = ADVANCED_FACE('',(#13152),#5742,.T.);+#13152 = FACE_BOUND('',#13153,.T.);+#13153 = EDGE_LOOP('',(#13154,#13155,#13176,#13177));+#13154 = ORIENTED_EDGE('',*,*,#5722,.T.);+#13155 = ORIENTED_EDGE('',*,*,#13156,.T.);+#13156 = EDGE_CURVE('',#5687,#12687,#13157,.T.);+#13157 = SURFACE_CURVE('',#13158,(#13162,#13169),.PCURVE_S1.);+#13158 = LINE('',#13159,#13160);+#13159 = CARTESIAN_POINT('',(-9.0576171875E-03,-8.408203125E-02,+ 1.6000001));+#13160 = VECTOR('',#13161,1.);+#13161 = DIRECTION('',(-0.,-0.,-1.));+#13162 = PCURVE('',#5742,#13163);+#13163 = DEFINITIONAL_REPRESENTATION('',(#13164),#13168);+#13164 = LINE('',#13165,#13166);+#13165 = CARTESIAN_POINT('',(0.,0.));+#13166 = VECTOR('',#13167,1.);+#13167 = DIRECTION('',(0.,-1.));+#13168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13169 = PCURVE('',#5706,#13170);+#13170 = DEFINITIONAL_REPRESENTATION('',(#13171),#13175);+#13171 = LINE('',#13172,#13173);+#13172 = CARTESIAN_POINT('',(1.,0.));+#13173 = VECTOR('',#13174,1.);+#13174 = DIRECTION('',(0.,-1.));+#13175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13176 = ORIENTED_EDGE('',*,*,#12709,.T.);+#13177 = ORIENTED_EDGE('',*,*,#13129,.F.);+#13178 = ADVANCED_FACE('',(#13179),#5706,.T.);+#13179 = FACE_BOUND('',#13180,.T.);+#13180 = EDGE_LOOP('',(#13181,#13182,#13203,#13204));+#13181 = ORIENTED_EDGE('',*,*,#5686,.T.);+#13182 = ORIENTED_EDGE('',*,*,#13183,.T.);+#13183 = EDGE_CURVE('',#5642,#12664,#13184,.T.);+#13184 = SURFACE_CURVE('',#13185,(#13189,#13196),.PCURVE_S1.);+#13185 = LINE('',#13186,#13187);+#13186 = CARTESIAN_POINT('',(3.531901041667E-02,-6.858723958333E-02,+ 1.6000001));+#13187 = VECTOR('',#13188,1.);+#13188 = DIRECTION('',(-0.,-0.,-1.));+#13189 = PCURVE('',#5706,#13190);+#13190 = DEFINITIONAL_REPRESENTATION('',(#13191),#13195);+#13191 = LINE('',#13192,#13193);+#13192 = CARTESIAN_POINT('',(0.,0.));+#13193 = VECTOR('',#13194,1.);+#13194 = DIRECTION('',(0.,-1.));+#13195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13196 = PCURVE('',#5667,#13197);+#13197 = DEFINITIONAL_REPRESENTATION('',(#13198),#13202);+#13198 = LINE('',#13199,#13200);+#13199 = CARTESIAN_POINT('',(1.,0.));+#13200 = VECTOR('',#13201,1.);+#13201 = DIRECTION('',(0.,-1.));+#13202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13203 = ORIENTED_EDGE('',*,*,#12686,.T.);+#13204 = ORIENTED_EDGE('',*,*,#13156,.F.);+#13205 = ADVANCED_FACE('',(#13206),#5667,.T.);+#13206 = FACE_BOUND('',#13207,.T.);+#13207 = EDGE_LOOP('',(#13208,#13209,#13230,#13231));+#13208 = ORIENTED_EDGE('',*,*,#5641,.T.);+#13209 = ORIENTED_EDGE('',*,*,#13210,.T.);+#13210 = EDGE_CURVE('',#5606,#12641,#13211,.T.);+#13211 = SURFACE_CURVE('',#13212,(#13216,#13223),.PCURVE_S1.);+#13212 = LINE('',#13213,#13214);+#13213 = CARTESIAN_POINT('',(5.155436197917E-02,-2.620442708333E-02,+ 1.6000001));+#13214 = VECTOR('',#13215,1.);+#13215 = DIRECTION('',(-0.,-0.,-1.));+#13216 = PCURVE('',#5667,#13217);+#13217 = DEFINITIONAL_REPRESENTATION('',(#13218),#13222);+#13218 = LINE('',#13219,#13220);+#13219 = CARTESIAN_POINT('',(0.,0.));+#13220 = VECTOR('',#13221,1.);+#13221 = DIRECTION('',(0.,-1.));+#13222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13223 = PCURVE('',#5625,#13224);+#13224 = DEFINITIONAL_REPRESENTATION('',(#13225),#13229);+#13225 = LINE('',#13226,#13227);+#13226 = CARTESIAN_POINT('',(1.,0.));+#13227 = VECTOR('',#13228,1.);+#13228 = DIRECTION('',(0.,-1.));+#13229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13230 = ORIENTED_EDGE('',*,*,#12663,.T.);+#13231 = ORIENTED_EDGE('',*,*,#13183,.F.);+#13232 = ADVANCED_FACE('',(#13233),#5625,.T.);+#13233 = FACE_BOUND('',#13234,.T.);+#13234 = EDGE_LOOP('',(#13235,#13236,#13257,#13258));+#13235 = ORIENTED_EDGE('',*,*,#5605,.T.);+#13236 = ORIENTED_EDGE('',*,*,#13237,.T.);+#13237 = EDGE_CURVE('',#5561,#12618,#13238,.T.);+#13238 = SURFACE_CURVE('',#13239,(#13243,#13250),.PCURVE_S1.);+#13239 = LINE('',#13240,#13241);+#13240 = CARTESIAN_POINT('',(3.60595703125E-02,1.6064453125E-02,+ 1.6000001));+#13241 = VECTOR('',#13242,1.);+#13242 = DIRECTION('',(-0.,-0.,-1.));+#13243 = PCURVE('',#5625,#13244);+#13244 = DEFINITIONAL_REPRESENTATION('',(#13245),#13249);+#13245 = LINE('',#13246,#13247);+#13246 = CARTESIAN_POINT('',(0.,0.));+#13247 = VECTOR('',#13248,1.);+#13248 = DIRECTION('',(0.,-1.));+#13249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13250 = PCURVE('',#5586,#13251);+#13251 = DEFINITIONAL_REPRESENTATION('',(#13252),#13256);+#13252 = LINE('',#13253,#13254);+#13253 = CARTESIAN_POINT('',(1.,0.));+#13254 = VECTOR('',#13255,1.);+#13255 = DIRECTION('',(0.,-1.));+#13256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13257 = ORIENTED_EDGE('',*,*,#12640,.T.);+#13258 = ORIENTED_EDGE('',*,*,#13210,.F.);+#13259 = ADVANCED_FACE('',(#13260),#5586,.T.);+#13260 = FACE_BOUND('',#13261,.T.);+#13261 = EDGE_LOOP('',(#13262,#13263,#13284,#13285));+#13262 = ORIENTED_EDGE('',*,*,#5560,.T.);+#13263 = ORIENTED_EDGE('',*,*,#13264,.T.);+#13264 = EDGE_CURVE('',#5525,#12595,#13265,.T.);+#13265 = SURFACE_CURVE('',#13266,(#13270,#13277),.PCURVE_S1.);+#13266 = LINE('',#13267,#13268);+#13267 = CARTESIAN_POINT('',(-5.867513020833E-03,3.167317708333E-02,+ 1.6000001));+#13268 = VECTOR('',#13269,1.);+#13269 = DIRECTION('',(-0.,-0.,-1.));+#13270 = PCURVE('',#5586,#13271);+#13271 = DEFINITIONAL_REPRESENTATION('',(#13272),#13276);+#13272 = LINE('',#13273,#13274);+#13273 = CARTESIAN_POINT('',(0.,0.));+#13274 = VECTOR('',#13275,1.);+#13275 = DIRECTION('',(0.,-1.));+#13276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13277 = PCURVE('',#5544,#13278);+#13278 = DEFINITIONAL_REPRESENTATION('',(#13279),#13283);+#13279 = LINE('',#13280,#13281);+#13280 = CARTESIAN_POINT('',(1.,0.));+#13281 = VECTOR('',#13282,1.);+#13282 = DIRECTION('',(0.,-1.));+#13283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13284 = ORIENTED_EDGE('',*,*,#12617,.T.);+#13285 = ORIENTED_EDGE('',*,*,#13237,.F.);+#13286 = ADVANCED_FACE('',(#13287),#5544,.T.);+#13287 = FACE_BOUND('',#13288,.T.);+#13288 = EDGE_LOOP('',(#13289,#13290,#13311,#13312));+#13289 = ORIENTED_EDGE('',*,*,#5524,.T.);+#13290 = ORIENTED_EDGE('',*,*,#13291,.T.);+#13291 = EDGE_CURVE('',#5489,#12572,#13292,.T.);+#13292 = SURFACE_CURVE('',#13293,(#13297,#13304),.PCURVE_S1.);+#13293 = LINE('',#13294,#13295);+#13294 = CARTESIAN_POINT('',(-1.583658854167E-02,3.081868489583E-02,+ 1.6000001));+#13295 = VECTOR('',#13296,1.);+#13296 = DIRECTION('',(-0.,-0.,-1.));+#13297 = PCURVE('',#5544,#13298);+#13298 = DEFINITIONAL_REPRESENTATION('',(#13299),#13303);+#13299 = LINE('',#13300,#13301);+#13300 = CARTESIAN_POINT('',(0.,0.));+#13301 = VECTOR('',#13302,1.);+#13302 = DIRECTION('',(0.,-1.));+#13303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13304 = PCURVE('',#5508,#13305);+#13305 = DEFINITIONAL_REPRESENTATION('',(#13306),#13310);+#13306 = LINE('',#13307,#13308);+#13307 = CARTESIAN_POINT('',(1.,0.));+#13308 = VECTOR('',#13309,1.);+#13309 = DIRECTION('',(0.,-1.));+#13310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13311 = ORIENTED_EDGE('',*,*,#12594,.T.);+#13312 = ORIENTED_EDGE('',*,*,#13264,.F.);+#13313 = ADVANCED_FACE('',(#13314),#5508,.T.);+#13314 = FACE_BOUND('',#13315,.T.);+#13315 = EDGE_LOOP('',(#13316,#13317,#13338,#13339));+#13316 = ORIENTED_EDGE('',*,*,#5488,.T.);+#13317 = ORIENTED_EDGE('',*,*,#13318,.T.);+#13318 = EDGE_CURVE('',#5462,#12549,#13319,.T.);+#13319 = SURFACE_CURVE('',#13320,(#13324,#13331),.PCURVE_S1.);+#13320 = LINE('',#13321,#13322);+#13321 = CARTESIAN_POINT('',(-2.569173177083E-02,2.814127604167E-02,+ 1.6000001));+#13322 = VECTOR('',#13323,1.);+#13323 = DIRECTION('',(-0.,-0.,-1.));+#13324 = PCURVE('',#5508,#13325);+#13325 = DEFINITIONAL_REPRESENTATION('',(#13326),#13330);+#13326 = LINE('',#13327,#13328);+#13327 = CARTESIAN_POINT('',(0.,0.));+#13328 = VECTOR('',#13329,1.);+#13329 = DIRECTION('',(0.,-1.));+#13330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13331 = PCURVE('',#5477,#13332);+#13332 = DEFINITIONAL_REPRESENTATION('',(#13333),#13337);+#13333 = LINE('',#13334,#13335);+#13334 = CARTESIAN_POINT('',(4.181315104167E-02,0.));+#13335 = VECTOR('',#13336,1.);+#13336 = DIRECTION('',(0.,-1.));+#13337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13338 = ORIENTED_EDGE('',*,*,#12571,.T.);+#13339 = ORIENTED_EDGE('',*,*,#13291,.F.);+#13340 = ADVANCED_FACE('',(#13341),#5477,.T.);+#13341 = FACE_BOUND('',#13342,.T.);+#13342 = EDGE_LOOP('',(#13343,#13344,#13365,#13366));+#13343 = ORIENTED_EDGE('',*,*,#5461,.F.);+#13344 = ORIENTED_EDGE('',*,*,#13345,.T.);+#13345 = EDGE_CURVE('',#5435,#12526,#13346,.T.);+#13346 = SURFACE_CURVE('',#13347,(#13351,#13358),.PCURVE_S1.);+#13347 = LINE('',#13348,#13349);+#13348 = CARTESIAN_POINT('',(-2.569173177083E-02,6.995442708333E-02,+ 1.6000001));+#13349 = VECTOR('',#13350,1.);+#13350 = DIRECTION('',(-0.,-0.,-1.));+#13351 = PCURVE('',#5477,#13352);+#13352 = DEFINITIONAL_REPRESENTATION('',(#13353),#13357);+#13353 = LINE('',#13354,#13355);+#13354 = CARTESIAN_POINT('',(0.,0.));+#13355 = VECTOR('',#13356,1.);+#13356 = DIRECTION('',(0.,-1.));+#13357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13358 = PCURVE('',#5450,#13359);+#13359 = DEFINITIONAL_REPRESENTATION('',(#13360),#13364);+#13360 = LINE('',#13361,#13362);+#13361 = CARTESIAN_POINT('',(6.516927083333E-02,0.));+#13362 = VECTOR('',#13363,1.);+#13363 = DIRECTION('',(0.,-1.));+#13364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13365 = ORIENTED_EDGE('',*,*,#12548,.T.);+#13366 = ORIENTED_EDGE('',*,*,#13318,.F.);+#13367 = ADVANCED_FACE('',(#13368),#5450,.T.);+#13368 = FACE_BOUND('',#13369,.T.);+#13369 = EDGE_LOOP('',(#13370,#13371,#13392,#13393));+#13370 = ORIENTED_EDGE('',*,*,#5434,.F.);+#13371 = ORIENTED_EDGE('',*,*,#13372,.T.);+#13372 = EDGE_CURVE('',#5408,#12503,#13373,.T.);+#13373 = SURFACE_CURVE('',#13374,(#13378,#13385),.PCURVE_S1.);+#13374 = LINE('',#13375,#13376);+#13375 = CARTESIAN_POINT('',(3.94775390625E-02,6.995442708333E-02,+ 1.6000001));+#13376 = VECTOR('',#13377,1.);+#13377 = DIRECTION('',(-0.,-0.,-1.));+#13378 = PCURVE('',#5450,#13379);+#13379 = DEFINITIONAL_REPRESENTATION('',(#13380),#13384);+#13380 = LINE('',#13381,#13382);+#13381 = CARTESIAN_POINT('',(0.,0.));+#13382 = VECTOR('',#13383,1.);+#13383 = DIRECTION('',(0.,-1.));+#13384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13385 = PCURVE('',#5423,#13386);+#13386 = DEFINITIONAL_REPRESENTATION('',(#13387),#13391);+#13387 = LINE('',#13388,#13389);+#13388 = CARTESIAN_POINT('',(1.936848958333E-02,0.));+#13389 = VECTOR('',#13390,1.);+#13390 = DIRECTION('',(0.,-1.));+#13391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13392 = ORIENTED_EDGE('',*,*,#12525,.T.);+#13393 = ORIENTED_EDGE('',*,*,#13345,.F.);+#13394 = ADVANCED_FACE('',(#13395),#5423,.T.);+#13395 = FACE_BOUND('',#13396,.T.);+#13396 = EDGE_LOOP('',(#13397,#13398,#13419,#13420));+#13397 = ORIENTED_EDGE('',*,*,#5407,.F.);+#13398 = ORIENTED_EDGE('',*,*,#13399,.T.);+#13399 = EDGE_CURVE('',#5381,#12480,#13400,.T.);+#13400 = SURFACE_CURVE('',#13401,(#13405,#13412),.PCURVE_S1.);+#13401 = LINE('',#13402,#13403);+#13402 = CARTESIAN_POINT('',(3.94775390625E-02,8.932291666667E-02,+ 1.6000001));+#13403 = VECTOR('',#13404,1.);+#13404 = DIRECTION('',(-0.,-0.,-1.));+#13405 = PCURVE('',#5423,#13406);+#13406 = DEFINITIONAL_REPRESENTATION('',(#13407),#13411);+#13407 = LINE('',#13408,#13409);+#13408 = CARTESIAN_POINT('',(0.,0.));+#13409 = VECTOR('',#13410,1.);+#13410 = DIRECTION('',(0.,-1.));+#13411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13412 = PCURVE('',#5396,#13413);+#13413 = DEFINITIONAL_REPRESENTATION('',(#13414),#13418);+#13414 = LINE('',#13415,#13416);+#13415 = CARTESIAN_POINT('',(8.61328125E-02,0.));+#13416 = VECTOR('',#13417,1.);+#13417 = DIRECTION('',(0.,-1.));+#13418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13419 = ORIENTED_EDGE('',*,*,#12502,.T.);+#13420 = ORIENTED_EDGE('',*,*,#13372,.F.);+#13421 = ADVANCED_FACE('',(#13422),#5396,.T.);+#13422 = FACE_BOUND('',#13423,.T.);+#13423 = EDGE_LOOP('',(#13424,#13425,#13446,#13447));+#13424 = ORIENTED_EDGE('',*,*,#5380,.F.);+#13425 = ORIENTED_EDGE('',*,*,#13426,.T.);+#13426 = EDGE_CURVE('',#5354,#12457,#13427,.T.);+#13427 = SURFACE_CURVE('',#13428,(#13432,#13439),.PCURVE_S1.);+#13428 = LINE('',#13429,#13430);+#13429 = CARTESIAN_POINT('',(-4.66552734375E-02,8.932291666667E-02,+ 1.6000001));+#13430 = VECTOR('',#13431,1.);+#13431 = DIRECTION('',(-0.,-0.,-1.));+#13432 = PCURVE('',#5396,#13433);+#13433 = DEFINITIONAL_REPRESENTATION('',(#13434),#13438);+#13434 = LINE('',#13435,#13436);+#13435 = CARTESIAN_POINT('',(0.,0.));+#13436 = VECTOR('',#13437,1.);+#13437 = DIRECTION('',(0.,-1.));+#13438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13439 = PCURVE('',#5369,#13440);+#13440 = DEFINITIONAL_REPRESENTATION('',(#13441),#13445);+#13441 = LINE('',#13442,#13443);+#13442 = CARTESIAN_POINT('',(8.544921875E-02,0.));+#13443 = VECTOR('',#13444,1.);+#13444 = DIRECTION('',(0.,-1.));+#13445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13446 = ORIENTED_EDGE('',*,*,#12479,.T.);+#13447 = ORIENTED_EDGE('',*,*,#13399,.F.);+#13448 = ADVANCED_FACE('',(#13449),#5369,.T.);+#13449 = FACE_BOUND('',#13450,.T.);+#13450 = EDGE_LOOP('',(#13451,#13452,#13473,#13474));+#13451 = ORIENTED_EDGE('',*,*,#5353,.F.);+#13452 = ORIENTED_EDGE('',*,*,#13453,.T.);+#13453 = EDGE_CURVE('',#5316,#12455,#13454,.T.);+#13454 = SURFACE_CURVE('',#13455,(#13459,#13466),.PCURVE_S1.);+#13455 = LINE('',#13456,#13457);+#13456 = CARTESIAN_POINT('',(-4.66552734375E-02,3.873697916667E-03,+ 1.6000001));+#13457 = VECTOR('',#13458,1.);+#13458 = DIRECTION('',(-0.,-0.,-1.));+#13459 = PCURVE('',#5369,#13460);+#13460 = DEFINITIONAL_REPRESENTATION('',(#13461),#13465);+#13461 = LINE('',#13462,#13463);+#13462 = CARTESIAN_POINT('',(0.,0.));+#13463 = VECTOR('',#13464,1.);+#13464 = DIRECTION('',(0.,-1.));+#13465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13466 = PCURVE('',#5337,#13467);+#13467 = DEFINITIONAL_REPRESENTATION('',(#13468),#13472);+#13468 = LINE('',#13469,#13470);+#13469 = CARTESIAN_POINT('',(1.,0.));+#13470 = VECTOR('',#13471,1.);+#13471 = DIRECTION('',(0.,-1.));+#13472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13473 = ORIENTED_EDGE('',*,*,#12454,.T.);+#13474 = ORIENTED_EDGE('',*,*,#13426,.F.);+#13475 = ADVANCED_FACE('',(#13476),#5337,.T.);+#13476 = FACE_BOUND('',#13477,.T.);+#13477 = EDGE_LOOP('',(#13478,#13479,#13480,#13481));+#13478 = ORIENTED_EDGE('',*,*,#5315,.T.);+#13479 = ORIENTED_EDGE('',*,*,#12430,.T.);+#13480 = ORIENTED_EDGE('',*,*,#12915,.T.);+#13481 = ORIENTED_EDGE('',*,*,#13453,.F.);+#13482 = ADVANCED_FACE('',(#13483),#5297,.T.);+#13483 = FACE_BOUND('',#13484,.T.);+#13484 = EDGE_LOOP('',(#13485,#13486,#13509,#13537));+#13485 = ORIENTED_EDGE('',*,*,#5279,.T.);+#13486 = ORIENTED_EDGE('',*,*,#13487,.T.);+#13487 = EDGE_CURVE('',#5244,#13488,#13490,.T.);+#13488 = VERTEX_POINT('',#13489);+#13489 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.5000001));+#13490 = SURFACE_CURVE('',#13491,(#13495,#13502),.PCURVE_S1.);+#13491 = LINE('',#13492,#13493);+#13492 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.6000001));+#13493 = VECTOR('',#13494,1.);+#13494 = DIRECTION('',(-0.,-0.,-1.));+#13495 = PCURVE('',#5297,#13496);+#13496 = DEFINITIONAL_REPRESENTATION('',(#13497),#13501);+#13497 = LINE('',#13498,#13499);+#13498 = CARTESIAN_POINT('',(0.,0.));+#13499 = VECTOR('',#13500,1.);+#13500 = DIRECTION('',(0.,-1.));+#13501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13502 = PCURVE('',#5263,#13503);+#13503 = DEFINITIONAL_REPRESENTATION('',(#13504),#13508);+#13504 = LINE('',#13505,#13506);+#13505 = CARTESIAN_POINT('',(1.,0.));+#13506 = VECTOR('',#13507,1.);+#13507 = DIRECTION('',(0.,-1.));+#13508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13509 = ORIENTED_EDGE('',*,*,#13510,.T.);+#13510 = EDGE_CURVE('',#13488,#13511,#13513,.T.);+#13511 = VERTEX_POINT('',#13512);+#13512 = CARTESIAN_POINT('',(-0.170385742187,1.019694010417E-02,+ 1.5000001));+#13513 = SURFACE_CURVE('',#13514,(#13518,#13525),.PCURVE_S1.);+#13514 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13515,#13516,#13517),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13515 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.5000001));+#13516 = CARTESIAN_POINT('',(-0.161612955729,1.23046875E-02,1.5000001));+#13517 = CARTESIAN_POINT('',(-0.170385742187,1.019694010417E-02,+ 1.5000001));+#13518 = PCURVE('',#5297,#13519);+#13519 = DEFINITIONAL_REPRESENTATION('',(#13520),#13524);+#13520 = LINE('',#13521,#13522);+#13521 = CARTESIAN_POINT('',(0.,-0.1));+#13522 = VECTOR('',#13523,1.);+#13523 = DIRECTION('',(1.,0.));+#13524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13525 = PCURVE('',#13526,#13531);+#13526 = PLANE('',#13527);+#13527 = AXIS2_PLACEMENT_3D('',#13528,#13529,#13530);+#13528 = CARTESIAN_POINT('',(-0.210717773438,-8.077799479167E-02,+ 1.5000001));+#13529 = DIRECTION('',(0.,0.,1.));+#13530 = DIRECTION('',(1.,0.,0.));+#13531 = DEFINITIONAL_REPRESENTATION('',(#13532),#13536);+#13532 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13533,#13534,#13535),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13533 = CARTESIAN_POINT('',(5.833333333333E-02,9.308268229167E-02));+#13534 = CARTESIAN_POINT('',(4.910481770833E-02,9.308268229167E-02));+#13535 = CARTESIAN_POINT('',(4.033203125E-02,9.097493489583E-02));+#13536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13537 = ORIENTED_EDGE('',*,*,#13538,.F.);+#13538 = EDGE_CURVE('',#4560,#13511,#13539,.T.);+#13539 = SURFACE_CURVE('',#13540,(#13544,#13551),.PCURVE_S1.);+#13540 = LINE('',#13541,#13542);+#13541 = CARTESIAN_POINT('',(-0.170385742187,1.019694010417E-02,+ 1.6000001));+#13542 = VECTOR('',#13543,1.);+#13543 = DIRECTION('',(-0.,-0.,-1.));+#13544 = PCURVE('',#5297,#13545);+#13545 = DEFINITIONAL_REPRESENTATION('',(#13546),#13550);+#13546 = LINE('',#13547,#13548);+#13547 = CARTESIAN_POINT('',(1.,0.));+#13548 = VECTOR('',#13549,1.);+#13549 = DIRECTION('',(0.,-1.));+#13550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13551 = PCURVE('',#4579,#13552);+#13552 = DEFINITIONAL_REPRESENTATION('',(#13553),#13557);+#13553 = LINE('',#13554,#13555);+#13554 = CARTESIAN_POINT('',(0.,0.));+#13555 = VECTOR('',#13556,1.);+#13556 = DIRECTION('',(0.,-1.));+#13557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13558 = ADVANCED_FACE('',(#13559),#13526,.T.);+#13559 = FACE_BOUND('',#13560,.F.);+#13560 = EDGE_LOOP('',(#13561,#13586,#13609,#13632,#13655,#13678,#13701,+ #13724,#13747,#13770,#13793,#13816,#13839,#13862,#13885,#13908,+ #13931,#13954,#13977,#14000,#14021,#14022));+#13561 = ORIENTED_EDGE('',*,*,#13562,.T.);+#13562 = EDGE_CURVE('',#13563,#13565,#13567,.T.);+#13563 = VERTEX_POINT('',#13564);+#13564 = CARTESIAN_POINT('',(-0.187133789062,3.873697916667E-03,+ 1.5000001));+#13565 = VERTEX_POINT('',#13566);+#13566 = CARTESIAN_POINT('',(-0.187133789062,8.932291666667E-02,+ 1.5000001));+#13567 = SURFACE_CURVE('',#13568,(#13572,#13579),.PCURVE_S1.);+#13568 = LINE('',#13569,#13570);+#13569 = CARTESIAN_POINT('',(-0.187133789062,3.873697916667E-03,+ 1.5000001));+#13570 = VECTOR('',#13571,1.);+#13571 = DIRECTION('',(0.,1.,0.));+#13572 = PCURVE('',#13526,#13573);+#13573 = DEFINITIONAL_REPRESENTATION('',(#13574),#13578);+#13574 = LINE('',#13575,#13576);+#13575 = CARTESIAN_POINT('',(2.3583984375E-02,8.465169270833E-02));+#13576 = VECTOR('',#13577,1.);+#13577 = DIRECTION('',(0.,1.));+#13578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13579 = PCURVE('',#4611,#13580);+#13580 = DEFINITIONAL_REPRESENTATION('',(#13581),#13585);+#13581 = LINE('',#13582,#13583);+#13582 = CARTESIAN_POINT('',(0.,-0.1));+#13583 = VECTOR('',#13584,1.);+#13584 = DIRECTION('',(1.,0.));+#13585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13586 = ORIENTED_EDGE('',*,*,#13587,.T.);+#13587 = EDGE_CURVE('',#13565,#13588,#13590,.T.);+#13588 = VERTEX_POINT('',#13589);+#13589 = CARTESIAN_POINT('',(-0.101000976562,8.932291666667E-02,+ 1.5000001));+#13590 = SURFACE_CURVE('',#13591,(#13595,#13602),.PCURVE_S1.);+#13591 = LINE('',#13592,#13593);+#13592 = CARTESIAN_POINT('',(-0.187133789062,8.932291666667E-02,+ 1.5000001));+#13593 = VECTOR('',#13594,1.);+#13594 = DIRECTION('',(1.,0.,0.));+#13595 = PCURVE('',#13526,#13596);+#13596 = DEFINITIONAL_REPRESENTATION('',(#13597),#13601);+#13597 = LINE('',#13598,#13599);+#13598 = CARTESIAN_POINT('',(2.3583984375E-02,0.170100911458));+#13599 = VECTOR('',#13600,1.);+#13600 = DIRECTION('',(1.,0.));+#13601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13602 = PCURVE('',#4638,#13603);+#13603 = DEFINITIONAL_REPRESENTATION('',(#13604),#13608);+#13604 = LINE('',#13605,#13606);+#13605 = CARTESIAN_POINT('',(0.,-0.1));+#13606 = VECTOR('',#13607,1.);+#13607 = DIRECTION('',(1.,0.));+#13608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13609 = ORIENTED_EDGE('',*,*,#13610,.T.);+#13610 = EDGE_CURVE('',#13588,#13611,#13613,.T.);+#13611 = VERTEX_POINT('',#13612);+#13612 = CARTESIAN_POINT('',(-0.101000976562,6.995442708333E-02,+ 1.5000001));+#13613 = SURFACE_CURVE('',#13614,(#13618,#13625),.PCURVE_S1.);+#13614 = LINE('',#13615,#13616);+#13615 = CARTESIAN_POINT('',(-0.101000976562,8.932291666667E-02,+ 1.5000001));+#13616 = VECTOR('',#13617,1.);+#13617 = DIRECTION('',(0.,-1.,0.));+#13618 = PCURVE('',#13526,#13619);+#13619 = DEFINITIONAL_REPRESENTATION('',(#13620),#13624);+#13620 = LINE('',#13621,#13622);+#13621 = CARTESIAN_POINT('',(0.109716796875,0.170100911458));+#13622 = VECTOR('',#13623,1.);+#13623 = DIRECTION('',(0.,-1.));+#13624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13625 = PCURVE('',#4665,#13626);+#13626 = DEFINITIONAL_REPRESENTATION('',(#13627),#13631);+#13627 = LINE('',#13628,#13629);+#13628 = CARTESIAN_POINT('',(0.,-0.1));+#13629 = VECTOR('',#13630,1.);+#13630 = DIRECTION('',(1.,0.));+#13631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13632 = ORIENTED_EDGE('',*,*,#13633,.T.);+#13633 = EDGE_CURVE('',#13611,#13634,#13636,.T.);+#13634 = VERTEX_POINT('',#13635);+#13635 = CARTESIAN_POINT('',(-0.166170247396,6.995442708333E-02,+ 1.5000001));+#13636 = SURFACE_CURVE('',#13637,(#13641,#13648),.PCURVE_S1.);+#13637 = LINE('',#13638,#13639);+#13638 = CARTESIAN_POINT('',(-0.101000976562,6.995442708333E-02,+ 1.5000001));+#13639 = VECTOR('',#13640,1.);+#13640 = DIRECTION('',(-1.,0.,0.));+#13641 = PCURVE('',#13526,#13642);+#13642 = DEFINITIONAL_REPRESENTATION('',(#13643),#13647);+#13643 = LINE('',#13644,#13645);+#13644 = CARTESIAN_POINT('',(0.109716796875,0.150732421875));+#13645 = VECTOR('',#13646,1.);+#13646 = DIRECTION('',(-1.,0.));+#13647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13648 = PCURVE('',#4692,#13649);+#13649 = DEFINITIONAL_REPRESENTATION('',(#13650),#13654);+#13650 = LINE('',#13651,#13652);+#13651 = CARTESIAN_POINT('',(0.,-0.1));+#13652 = VECTOR('',#13653,1.);+#13653 = DIRECTION('',(1.,0.));+#13654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13655 = ORIENTED_EDGE('',*,*,#13656,.T.);+#13656 = EDGE_CURVE('',#13634,#13657,#13659,.T.);+#13657 = VERTEX_POINT('',#13658);+#13658 = CARTESIAN_POINT('',(-0.166170247396,2.814127604167E-02,+ 1.5000001));+#13659 = SURFACE_CURVE('',#13660,(#13664,#13671),.PCURVE_S1.);+#13660 = LINE('',#13661,#13662);+#13661 = CARTESIAN_POINT('',(-0.166170247396,6.995442708333E-02,+ 1.5000001));+#13662 = VECTOR('',#13663,1.);+#13663 = DIRECTION('',(0.,-1.,0.));+#13664 = PCURVE('',#13526,#13665);+#13665 = DEFINITIONAL_REPRESENTATION('',(#13666),#13670);+#13666 = LINE('',#13667,#13668);+#13667 = CARTESIAN_POINT('',(4.454752604167E-02,0.150732421875));+#13668 = VECTOR('',#13669,1.);+#13669 = DIRECTION('',(0.,-1.));+#13670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13671 = PCURVE('',#4719,#13672);+#13672 = DEFINITIONAL_REPRESENTATION('',(#13673),#13677);+#13673 = LINE('',#13674,#13675);+#13674 = CARTESIAN_POINT('',(0.,-0.1));+#13675 = VECTOR('',#13676,1.);+#13676 = DIRECTION('',(1.,0.));+#13677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13678 = ORIENTED_EDGE('',*,*,#13679,.T.);+#13679 = EDGE_CURVE('',#13657,#13680,#13682,.T.);+#13680 = VERTEX_POINT('',#13681);+#13681 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,+ 1.5000001));+#13682 = SURFACE_CURVE('',#13683,(#13687,#13694),.PCURVE_S1.);+#13683 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13684,#13685,#13686),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13684 = CARTESIAN_POINT('',(-0.166170247396,2.814127604167E-02,+ 1.5000001));+#13685 = CARTESIAN_POINT('',(-0.161271158854,2.996419270833E-02,+ 1.5000001));+#13686 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,+ 1.5000001));+#13687 = PCURVE('',#13526,#13688);+#13688 = DEFINITIONAL_REPRESENTATION('',(#13689),#13693);+#13689 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13690,#13691,#13692),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13690 = CARTESIAN_POINT('',(4.454752604167E-02,0.108919270833));+#13691 = CARTESIAN_POINT('',(4.944661458333E-02,0.1107421875));+#13692 = CARTESIAN_POINT('',(5.440266927083E-02,0.111596679688));+#13693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13694 = PCURVE('',#4750,#13695);+#13695 = DEFINITIONAL_REPRESENTATION('',(#13696),#13700);+#13696 = LINE('',#13697,#13698);+#13697 = CARTESIAN_POINT('',(0.,-0.1));+#13698 = VECTOR('',#13699,1.);+#13699 = DIRECTION('',(1.,0.));+#13700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13701 = ORIENTED_EDGE('',*,*,#13702,.T.);+#13702 = EDGE_CURVE('',#13680,#13703,#13705,.T.);+#13703 = VERTEX_POINT('',#13704);+#13704 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,+ 1.5000001));+#13705 = SURFACE_CURVE('',#13706,(#13710,#13717),.PCURVE_S1.);+#13706 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13707,#13708,#13709),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13707 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,+ 1.5000001));+#13708 = CARTESIAN_POINT('',(-0.151359049479,3.167317708333E-02,+ 1.5000001));+#13709 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,+ 1.5000001));+#13710 = PCURVE('',#13526,#13711);+#13711 = DEFINITIONAL_REPRESENTATION('',(#13712),#13716);+#13712 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13713,#13714,#13715),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13713 = CARTESIAN_POINT('',(5.440266927083E-02,0.111596679688));+#13714 = CARTESIAN_POINT('',(5.935872395833E-02,0.112451171875));+#13715 = CARTESIAN_POINT('',(6.437174479167E-02,0.112451171875));+#13716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13717 = PCURVE('',#4786,#13718);+#13718 = DEFINITIONAL_REPRESENTATION('',(#13719),#13723);+#13719 = LINE('',#13720,#13721);+#13720 = CARTESIAN_POINT('',(0.,-0.1));+#13721 = VECTOR('',#13722,1.);+#13722 = DIRECTION('',(1.,0.));+#13723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13724 = ORIENTED_EDGE('',*,*,#13725,.T.);+#13725 = EDGE_CURVE('',#13703,#13726,#13728,.T.);+#13726 = VERTEX_POINT('',#13727);+#13727 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.5000001)+ );+#13728 = SURFACE_CURVE('',#13729,(#13733,#13740),.PCURVE_S1.);+#13729 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13730,#13731,#13732),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13730 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,+ 1.5000001));+#13731 = CARTESIAN_POINT('',(-0.119913736979,3.167317708333E-02,+ 1.5000001));+#13732 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.5000001)+ );+#13733 = PCURVE('',#13526,#13734);+#13734 = DEFINITIONAL_REPRESENTATION('',(#13735),#13739);+#13735 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13736,#13737,#13738),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13736 = CARTESIAN_POINT('',(6.437174479167E-02,0.112451171875));+#13737 = CARTESIAN_POINT('',(9.080403645833E-02,0.112451171875));+#13738 = CARTESIAN_POINT('',(0.106298828125,9.684244791667E-02));+#13739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13740 = PCURVE('',#4828,#13741);+#13741 = DEFINITIONAL_REPRESENTATION('',(#13742),#13746);+#13742 = LINE('',#13743,#13744);+#13743 = CARTESIAN_POINT('',(0.,-0.1));+#13744 = VECTOR('',#13745,1.);+#13745 = DIRECTION('',(1.,0.));+#13746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13747 = ORIENTED_EDGE('',*,*,#13748,.T.);+#13748 = EDGE_CURVE('',#13726,#13749,#13751,.T.);+#13749 = VERTEX_POINT('',#13750);+#13750 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,+ 1.5000001));+#13751 = SURFACE_CURVE('',#13752,(#13756,#13763),.PCURVE_S1.);+#13752 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13753,#13754,#13755),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13753 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.5000001)+ );+#13754 = CARTESIAN_POINT('',(-8.892415364583E-02,4.557291666667E-04,+ 1.5000001));+#13755 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,+ 1.5000001));+#13756 = PCURVE('',#13526,#13757);+#13757 = DEFINITIONAL_REPRESENTATION('',(#13758),#13762);+#13758 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13759,#13760,#13761),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13759 = CARTESIAN_POINT('',(0.106298828125,9.684244791667E-02));+#13760 = CARTESIAN_POINT('',(0.121793619792,8.123372395833E-02));+#13761 = CARTESIAN_POINT('',(0.121793619792,5.457356770833E-02));+#13762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13763 = PCURVE('',#4867,#13764);+#13764 = DEFINITIONAL_REPRESENTATION('',(#13765),#13769);+#13765 = LINE('',#13766,#13767);+#13766 = CARTESIAN_POINT('',(0.,-0.1));+#13767 = VECTOR('',#13768,1.);+#13768 = DIRECTION('',(1.,0.));+#13769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13770 = ORIENTED_EDGE('',*,*,#13771,.T.);+#13771 = EDGE_CURVE('',#13749,#13772,#13774,.T.);+#13772 = VERTEX_POINT('',#13773);+#13773 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,+ 1.5000001));+#13774 = SURFACE_CURVE('',#13775,(#13779,#13786),.PCURVE_S1.);+#13775 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13776,#13777,#13778),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13776 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,+ 1.5000001));+#13777 = CARTESIAN_POINT('',(-8.892415364583E-02,-5.309244791667E-02,+ 1.5000001));+#13778 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,+ 1.5000001));+#13779 = PCURVE('',#13526,#13780);+#13780 = DEFINITIONAL_REPRESENTATION('',(#13781),#13785);+#13781 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13782,#13783,#13784),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13782 = CARTESIAN_POINT('',(0.121793619792,5.457356770833E-02));+#13783 = CARTESIAN_POINT('',(0.121793619792,2.7685546875E-02));+#13784 = CARTESIAN_POINT('',(0.105558268229,1.219075520833E-02));+#13785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13786 = PCURVE('',#4909,#13787);+#13787 = DEFINITIONAL_REPRESENTATION('',(#13788),#13792);+#13788 = LINE('',#13789,#13790);+#13789 = CARTESIAN_POINT('',(0.,-0.1));+#13790 = VECTOR('',#13791,1.);+#13791 = DIRECTION('',(1.,0.));+#13792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13793 = ORIENTED_EDGE('',*,*,#13794,.T.);+#13794 = EDGE_CURVE('',#13772,#13795,#13797,.T.);+#13795 = VERTEX_POINT('',#13796);+#13796 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.5000001)+ );+#13797 = SURFACE_CURVE('',#13798,(#13802,#13809),.PCURVE_S1.);+#13798 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13799,#13800,#13801),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13799 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,+ 1.5000001));+#13800 = CARTESIAN_POINT('',(-0.121394856771,-8.408203125E-02,1.5000001)+ );+#13801 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.5000001)+ );+#13802 = PCURVE('',#13526,#13803);+#13803 = DEFINITIONAL_REPRESENTATION('',(#13804),#13808);+#13804 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13805,#13806,#13807),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13805 = CARTESIAN_POINT('',(0.105558268229,1.219075520833E-02));+#13806 = CARTESIAN_POINT('',(8.932291666667E-02,-3.304036458333E-03));+#13807 = CARTESIAN_POINT('',(6.1181640625E-02,-3.304036458333E-03));+#13808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13809 = PCURVE('',#4948,#13810);+#13810 = DEFINITIONAL_REPRESENTATION('',(#13811),#13815);+#13811 = LINE('',#13812,#13813);+#13812 = CARTESIAN_POINT('',(0.,-0.1));+#13813 = VECTOR('',#13814,1.);+#13814 = DIRECTION('',(1.,0.));+#13815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13816 = ORIENTED_EDGE('',*,*,#13817,.T.);+#13817 = EDGE_CURVE('',#13795,#13818,#13820,.T.);+#13818 = VERTEX_POINT('',#13819);+#13819 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,+ 1.5000001));+#13820 = SURFACE_CURVE('',#13821,(#13825,#13832),.PCURVE_S1.);+#13821 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13822,#13823,#13824),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13822 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.5000001)+ );+#13823 = CARTESIAN_POINT('',(-0.163094075521,-8.408203125E-02,1.5000001)+ );+#13824 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,+ 1.5000001));+#13825 = PCURVE('',#13526,#13826);+#13826 = DEFINITIONAL_REPRESENTATION('',(#13827),#13831);+#13827 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13828,#13829,#13830),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13828 = CARTESIAN_POINT('',(6.1181640625E-02,-3.304036458333E-03));+#13829 = CARTESIAN_POINT('',(4.762369791667E-02,-3.304036458333E-03));+#13830 = CARTESIAN_POINT('',(3.64013671875E-02,-1.481119791667E-03));+#13831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13832 = PCURVE('',#4984,#13833);+#13833 = DEFINITIONAL_REPRESENTATION('',(#13834),#13838);+#13834 = LINE('',#13835,#13836);+#13835 = CARTESIAN_POINT('',(0.,-0.1));+#13836 = VECTOR('',#13837,1.);+#13837 = DIRECTION('',(1.,0.));+#13838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13839 = ORIENTED_EDGE('',*,*,#13840,.T.);+#13840 = EDGE_CURVE('',#13818,#13841,#13843,.T.);+#13841 = VERTEX_POINT('',#13842);+#13842 = CARTESIAN_POINT('',(-0.194425455729,-7.679036458333E-02,+ 1.5000001));+#13843 = SURFACE_CURVE('',#13844,(#13848,#13855),.PCURVE_S1.);+#13844 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13845,#13846,#13847),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13845 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,+ 1.5000001));+#13846 = CARTESIAN_POINT('',(-0.185538736979,-8.043619791667E-02,+ 1.5000001));+#13847 = CARTESIAN_POINT('',(-0.194425455729,-7.679036458333E-02,+ 1.5000001));+#13848 = PCURVE('',#13526,#13849);+#13849 = DEFINITIONAL_REPRESENTATION('',(#13850),#13854);+#13850 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13851,#13852,#13853),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13851 = CARTESIAN_POINT('',(3.64013671875E-02,-1.481119791667E-03));+#13852 = CARTESIAN_POINT('',(2.517903645833E-02,3.41796875E-04));+#13853 = CARTESIAN_POINT('',(1.629231770833E-02,3.987630208333E-03));+#13854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13855 = PCURVE('',#5020,#13856);+#13856 = DEFINITIONAL_REPRESENTATION('',(#13857),#13861);+#13857 = LINE('',#13858,#13859);+#13858 = CARTESIAN_POINT('',(0.,-0.1));+#13859 = VECTOR('',#13860,1.);+#13860 = DIRECTION('',(1.,0.));+#13861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13862 = ORIENTED_EDGE('',*,*,#13863,.T.);+#13863 = EDGE_CURVE('',#13841,#13864,#13866,.T.);+#13864 = VERTEX_POINT('',#13865);+#13865 = CARTESIAN_POINT('',(-0.194425455729,-5.343424479167E-02,+ 1.5000001));+#13866 = SURFACE_CURVE('',#13867,(#13871,#13878),.PCURVE_S1.);+#13867 = LINE('',#13868,#13869);+#13868 = CARTESIAN_POINT('',(-0.194425455729,-7.679036458333E-02,+ 1.5000001));+#13869 = VECTOR('',#13870,1.);+#13870 = DIRECTION('',(0.,1.,0.));+#13871 = PCURVE('',#13526,#13872);+#13872 = DEFINITIONAL_REPRESENTATION('',(#13873),#13877);+#13873 = LINE('',#13874,#13875);+#13874 = CARTESIAN_POINT('',(1.629231770833E-02,3.987630208333E-03));+#13875 = VECTOR('',#13876,1.);+#13876 = DIRECTION('',(0.,1.));+#13877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13878 = PCURVE('',#5052,#13879);+#13879 = DEFINITIONAL_REPRESENTATION('',(#13880),#13884);+#13880 = LINE('',#13881,#13882);+#13881 = CARTESIAN_POINT('',(0.,-0.1));+#13882 = VECTOR('',#13883,1.);+#13883 = DIRECTION('',(1.,0.));+#13884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13885 = ORIENTED_EDGE('',*,*,#13886,.T.);+#13886 = EDGE_CURVE('',#13864,#13887,#13889,.T.);+#13887 = VERTEX_POINT('',#13888);+#13888 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,+ 1.5000001));+#13889 = SURFACE_CURVE('',#13890,(#13894,#13901),.PCURVE_S1.);+#13890 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13891,#13892,#13893),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13891 = CARTESIAN_POINT('',(-0.194425455729,-5.343424479167E-02,+ 1.5000001));+#13892 = CARTESIAN_POINT('',(-0.183943684896,-5.9130859375E-02,1.5000001+ ));+#13893 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,+ 1.5000001));+#13894 = PCURVE('',#13526,#13895);+#13895 = DEFINITIONAL_REPRESENTATION('',(#13896),#13900);+#13896 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13897,#13898,#13899),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13897 = CARTESIAN_POINT('',(1.629231770833E-02,2.734375E-02));+#13898 = CARTESIAN_POINT('',(2.677408854167E-02,2.164713541667E-02));+#13899 = CARTESIAN_POINT('',(3.736979166667E-02,1.885579427083E-02));+#13900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13901 = PCURVE('',#5083,#13902);+#13902 = DEFINITIONAL_REPRESENTATION('',(#13903),#13907);+#13903 = LINE('',#13904,#13905);+#13904 = CARTESIAN_POINT('',(0.,-0.1));+#13905 = VECTOR('',#13906,1.);+#13906 = DIRECTION('',(1.,0.));+#13907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13908 = ORIENTED_EDGE('',*,*,#13909,.T.);+#13909 = EDGE_CURVE('',#13887,#13910,#13912,.T.);+#13910 = VERTEX_POINT('',#13911);+#13911 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,+ 1.5000001));+#13912 = SURFACE_CURVE('',#13913,(#13917,#13924),.PCURVE_S1.);+#13913 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13914,#13915,#13916),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13914 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,+ 1.5000001));+#13915 = CARTESIAN_POINT('',(-0.162752278646,-6.471354166667E-02,+ 1.5000001));+#13916 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,+ 1.5000001));+#13917 = PCURVE('',#13526,#13918);+#13918 = DEFINITIONAL_REPRESENTATION('',(#13919),#13923);+#13919 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13920,#13921,#13922),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13920 = CARTESIAN_POINT('',(3.736979166667E-02,1.885579427083E-02));+#13921 = CARTESIAN_POINT('',(4.796549479167E-02,1.6064453125E-02));+#13922 = CARTESIAN_POINT('',(5.901692708333E-02,1.6064453125E-02));+#13923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13924 = PCURVE('',#5119,#13925);+#13925 = DEFINITIONAL_REPRESENTATION('',(#13926),#13930);+#13926 = LINE('',#13927,#13928);+#13927 = CARTESIAN_POINT('',(0.,-0.1));+#13928 = VECTOR('',#13929,1.);+#13929 = DIRECTION('',(1.,0.));+#13930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13931 = ORIENTED_EDGE('',*,*,#13932,.T.);+#13932 = EDGE_CURVE('',#13910,#13933,#13935,.T.);+#13933 = VERTEX_POINT('',#13934);+#13934 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.5000001));+#13935 = SURFACE_CURVE('',#13936,(#13940,#13947),.PCURVE_S1.);+#13936 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13937,#13938,#13939),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13937 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,+ 1.5000001));+#13938 = CARTESIAN_POINT('',(-0.132674153646,-6.471354166667E-02,+ 1.5000001));+#13939 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.5000001));+#13940 = PCURVE('',#13526,#13941);+#13941 = DEFINITIONAL_REPRESENTATION('',(#13942),#13946);+#13942 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13943,#13944,#13945),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13943 = CARTESIAN_POINT('',(5.901692708333E-02,1.6064453125E-02));+#13944 = CARTESIAN_POINT('',(7.804361979167E-02,1.6064453125E-02));+#13945 = CARTESIAN_POINT('',(8.83544921875E-02,2.609049479167E-02));+#13946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13947 = PCURVE('',#5155,#13948);+#13948 = DEFINITIONAL_REPRESENTATION('',(#13949),#13953);+#13949 = LINE('',#13950,#13951);+#13950 = CARTESIAN_POINT('',(0.,-0.1));+#13951 = VECTOR('',#13952,1.);+#13952 = DIRECTION('',(1.,0.));+#13953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13954 = ORIENTED_EDGE('',*,*,#13955,.T.);+#13955 = EDGE_CURVE('',#13933,#13956,#13958,.T.);+#13956 = VERTEX_POINT('',#13957);+#13957 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,+ 1.5000001));+#13958 = SURFACE_CURVE('',#13959,(#13963,#13970),.PCURVE_S1.);+#13959 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13960,#13961,#13962),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13960 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.5000001));+#13961 = CARTESIAN_POINT('',(-0.112052408854,-4.466145833333E-02,+ 1.5000001));+#13962 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,+ 1.5000001));+#13963 = PCURVE('',#13526,#13964);+#13964 = DEFINITIONAL_REPRESENTATION('',(#13965),#13969);+#13965 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13966,#13967,#13968),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13966 = CARTESIAN_POINT('',(8.83544921875E-02,2.609049479167E-02));+#13967 = CARTESIAN_POINT('',(9.866536458333E-02,3.611653645833E-02));+#13968 = CARTESIAN_POINT('',(9.866536458333E-02,5.457356770833E-02));+#13969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13970 = PCURVE('',#5191,#13971);+#13971 = DEFINITIONAL_REPRESENTATION('',(#13972),#13976);+#13972 = LINE('',#13973,#13974);+#13973 = CARTESIAN_POINT('',(0.,-0.1));+#13974 = VECTOR('',#13975,1.);+#13975 = DIRECTION('',(1.,0.));+#13976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13977 = ORIENTED_EDGE('',*,*,#13978,.T.);+#13978 = EDGE_CURVE('',#13956,#13979,#13981,.T.);+#13979 = VERTEX_POINT('',#13980);+#13980 = CARTESIAN_POINT('',(-0.122705078125,2.164713541667E-03,+ 1.5000001));+#13981 = SURFACE_CURVE('',#13982,(#13986,#13993),.PCURVE_S1.);+#13982 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13983,#13984,#13985),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13983 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,+ 1.5000001));+#13984 = CARTESIAN_POINT('',(-0.112052408854,-7.975260416667E-03,+ 1.5000001));+#13985 = CARTESIAN_POINT('',(-0.122705078125,2.164713541667E-03,+ 1.5000001));+#13986 = PCURVE('',#13526,#13987);+#13987 = DEFINITIONAL_REPRESENTATION('',(#13988),#13992);+#13988 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#13989,#13990,#13991),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#13989 = CARTESIAN_POINT('',(9.866536458333E-02,5.457356770833E-02));+#13990 = CARTESIAN_POINT('',(9.866536458333E-02,7.2802734375E-02));+#13991 = CARTESIAN_POINT('',(8.80126953125E-02,8.294270833333E-02));+#13992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#13993 = PCURVE('',#5227,#13994);+#13994 = DEFINITIONAL_REPRESENTATION('',(#13995),#13999);+#13995 = LINE('',#13996,#13997);+#13996 = CARTESIAN_POINT('',(0.,-0.1));+#13997 = VECTOR('',#13998,1.);+#13998 = DIRECTION('',(1.,0.));+#13999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14000 = ORIENTED_EDGE('',*,*,#14001,.T.);+#14001 = EDGE_CURVE('',#13979,#13488,#14002,.T.);+#14002 = SURFACE_CURVE('',#14003,(#14007,#14014),.PCURVE_S1.);+#14003 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14004,#14005,#14006),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14004 = CARTESIAN_POINT('',(-0.122705078125,2.164713541667E-03,+ 1.5000001));+#14005 = CARTESIAN_POINT('',(-0.133357747396,1.23046875E-02,1.5000001));+#14006 = CARTESIAN_POINT('',(-0.152384440104,1.23046875E-02,1.5000001));+#14007 = PCURVE('',#13526,#14008);+#14008 = DEFINITIONAL_REPRESENTATION('',(#14009),#14013);+#14009 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14010,#14011,#14012),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14010 = CARTESIAN_POINT('',(8.80126953125E-02,8.294270833333E-02));+#14011 = CARTESIAN_POINT('',(7.736002604167E-02,9.308268229167E-02));+#14012 = CARTESIAN_POINT('',(5.833333333333E-02,9.308268229167E-02));+#14013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14014 = PCURVE('',#5263,#14015);+#14015 = DEFINITIONAL_REPRESENTATION('',(#14016),#14020);+#14016 = LINE('',#14017,#14018);+#14017 = CARTESIAN_POINT('',(0.,-0.1));+#14018 = VECTOR('',#14019,1.);+#14019 = DIRECTION('',(1.,0.));+#14020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14021 = ORIENTED_EDGE('',*,*,#13510,.T.);+#14022 = ORIENTED_EDGE('',*,*,#14023,.T.);+#14023 = EDGE_CURVE('',#13511,#13563,#14024,.T.);+#14024 = SURFACE_CURVE('',#14025,(#14029,#14036),.PCURVE_S1.);+#14025 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14026,#14027,#14028),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14026 = CARTESIAN_POINT('',(-0.170385742187,1.019694010417E-02,+ 1.5000001));+#14027 = CARTESIAN_POINT('',(-0.179158528646,8.089192708333E-03,+ 1.5000001));+#14028 = CARTESIAN_POINT('',(-0.187133789062,3.873697916667E-03,+ 1.5000001));+#14029 = PCURVE('',#13526,#14030);+#14030 = DEFINITIONAL_REPRESENTATION('',(#14031),#14035);+#14031 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14032,#14033,#14034),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14032 = CARTESIAN_POINT('',(4.033203125E-02,9.097493489583E-02));+#14033 = CARTESIAN_POINT('',(3.155924479167E-02,8.88671875E-02));+#14034 = CARTESIAN_POINT('',(2.3583984375E-02,8.465169270833E-02));+#14035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14036 = PCURVE('',#4579,#14037);+#14037 = DEFINITIONAL_REPRESENTATION('',(#14038),#14042);+#14038 = LINE('',#14039,#14040);+#14039 = CARTESIAN_POINT('',(0.,-0.1));+#14040 = VECTOR('',#14041,1.);+#14041 = DIRECTION('',(1.,0.));+#14042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14043 = ADVANCED_FACE('',(#14044),#5263,.T.);+#14044 = FACE_BOUND('',#14045,.T.);+#14045 = EDGE_LOOP('',(#14046,#14047,#14068,#14069));+#14046 = ORIENTED_EDGE('',*,*,#5243,.T.);+#14047 = ORIENTED_EDGE('',*,*,#14048,.T.);+#14048 = EDGE_CURVE('',#5208,#13979,#14049,.T.);+#14049 = SURFACE_CURVE('',#14050,(#14054,#14061),.PCURVE_S1.);+#14050 = LINE('',#14051,#14052);+#14051 = CARTESIAN_POINT('',(-0.122705078125,2.164713541667E-03,+ 1.6000001));+#14052 = VECTOR('',#14053,1.);+#14053 = DIRECTION('',(-0.,-0.,-1.));+#14054 = PCURVE('',#5263,#14055);+#14055 = DEFINITIONAL_REPRESENTATION('',(#14056),#14060);+#14056 = LINE('',#14057,#14058);+#14057 = CARTESIAN_POINT('',(0.,0.));+#14058 = VECTOR('',#14059,1.);+#14059 = DIRECTION('',(0.,-1.));+#14060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14061 = PCURVE('',#5227,#14062);+#14062 = DEFINITIONAL_REPRESENTATION('',(#14063),#14067);+#14063 = LINE('',#14064,#14065);+#14064 = CARTESIAN_POINT('',(1.,0.));+#14065 = VECTOR('',#14066,1.);+#14066 = DIRECTION('',(0.,-1.));+#14067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14068 = ORIENTED_EDGE('',*,*,#14001,.T.);+#14069 = ORIENTED_EDGE('',*,*,#13487,.F.);+#14070 = ADVANCED_FACE('',(#14071),#5227,.T.);+#14071 = FACE_BOUND('',#14072,.T.);+#14072 = EDGE_LOOP('',(#14073,#14074,#14095,#14096));+#14073 = ORIENTED_EDGE('',*,*,#5207,.T.);+#14074 = ORIENTED_EDGE('',*,*,#14075,.T.);+#14075 = EDGE_CURVE('',#5172,#13956,#14076,.T.);+#14076 = SURFACE_CURVE('',#14077,(#14081,#14088),.PCURVE_S1.);+#14077 = LINE('',#14078,#14079);+#14078 = CARTESIAN_POINT('',(-0.112052408854,-2.620442708333E-02,+ 1.6000001));+#14079 = VECTOR('',#14080,1.);+#14080 = DIRECTION('',(-0.,-0.,-1.));+#14081 = PCURVE('',#5227,#14082);+#14082 = DEFINITIONAL_REPRESENTATION('',(#14083),#14087);+#14083 = LINE('',#14084,#14085);+#14084 = CARTESIAN_POINT('',(0.,0.));+#14085 = VECTOR('',#14086,1.);+#14086 = DIRECTION('',(0.,-1.));+#14087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14088 = PCURVE('',#5191,#14089);+#14089 = DEFINITIONAL_REPRESENTATION('',(#14090),#14094);+#14090 = LINE('',#14091,#14092);+#14091 = CARTESIAN_POINT('',(1.,0.));+#14092 = VECTOR('',#14093,1.);+#14093 = DIRECTION('',(0.,-1.));+#14094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14095 = ORIENTED_EDGE('',*,*,#13978,.T.);+#14096 = ORIENTED_EDGE('',*,*,#14048,.F.);+#14097 = ADVANCED_FACE('',(#14098),#5191,.T.);+#14098 = FACE_BOUND('',#14099,.T.);+#14099 = EDGE_LOOP('',(#14100,#14101,#14122,#14123));+#14100 = ORIENTED_EDGE('',*,*,#5171,.T.);+#14101 = ORIENTED_EDGE('',*,*,#14102,.T.);+#14102 = EDGE_CURVE('',#5136,#13933,#14103,.T.);+#14103 = SURFACE_CURVE('',#14104,(#14108,#14115),.PCURVE_S1.);+#14104 = LINE('',#14105,#14106);+#14105 = CARTESIAN_POINT('',(-0.12236328125,-5.46875E-02,1.6000001));+#14106 = VECTOR('',#14107,1.);+#14107 = DIRECTION('',(-0.,-0.,-1.));+#14108 = PCURVE('',#5191,#14109);+#14109 = DEFINITIONAL_REPRESENTATION('',(#14110),#14114);+#14110 = LINE('',#14111,#14112);+#14111 = CARTESIAN_POINT('',(0.,0.));+#14112 = VECTOR('',#14113,1.);+#14113 = DIRECTION('',(0.,-1.));+#14114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14115 = PCURVE('',#5155,#14116);+#14116 = DEFINITIONAL_REPRESENTATION('',(#14117),#14121);+#14117 = LINE('',#14118,#14119);+#14118 = CARTESIAN_POINT('',(1.,0.));+#14119 = VECTOR('',#14120,1.);+#14120 = DIRECTION('',(0.,-1.));+#14121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14122 = ORIENTED_EDGE('',*,*,#13955,.T.);+#14123 = ORIENTED_EDGE('',*,*,#14075,.F.);+#14124 = ADVANCED_FACE('',(#14125),#5155,.T.);+#14125 = FACE_BOUND('',#14126,.T.);+#14126 = EDGE_LOOP('',(#14127,#14128,#14149,#14150));+#14127 = ORIENTED_EDGE('',*,*,#5135,.T.);+#14128 = ORIENTED_EDGE('',*,*,#14129,.T.);+#14129 = EDGE_CURVE('',#5100,#13910,#14130,.T.);+#14130 = SURFACE_CURVE('',#14131,(#14135,#14142),.PCURVE_S1.);+#14131 = LINE('',#14132,#14133);+#14132 = CARTESIAN_POINT('',(-0.151700846354,-6.471354166667E-02,+ 1.6000001));+#14133 = VECTOR('',#14134,1.);+#14134 = DIRECTION('',(-0.,-0.,-1.));+#14135 = PCURVE('',#5155,#14136);+#14136 = DEFINITIONAL_REPRESENTATION('',(#14137),#14141);+#14137 = LINE('',#14138,#14139);+#14138 = CARTESIAN_POINT('',(0.,0.));+#14139 = VECTOR('',#14140,1.);+#14140 = DIRECTION('',(0.,-1.));+#14141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14142 = PCURVE('',#5119,#14143);+#14143 = DEFINITIONAL_REPRESENTATION('',(#14144),#14148);+#14144 = LINE('',#14145,#14146);+#14145 = CARTESIAN_POINT('',(1.,0.));+#14146 = VECTOR('',#14147,1.);+#14147 = DIRECTION('',(0.,-1.));+#14148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14149 = ORIENTED_EDGE('',*,*,#13932,.T.);+#14150 = ORIENTED_EDGE('',*,*,#14102,.F.);+#14151 = ADVANCED_FACE('',(#14152),#5119,.T.);+#14152 = FACE_BOUND('',#14153,.T.);+#14153 = EDGE_LOOP('',(#14154,#14155,#14176,#14177));+#14154 = ORIENTED_EDGE('',*,*,#5099,.T.);+#14155 = ORIENTED_EDGE('',*,*,#14156,.T.);+#14156 = EDGE_CURVE('',#5064,#13887,#14157,.T.);+#14157 = SURFACE_CURVE('',#14158,(#14162,#14169),.PCURVE_S1.);+#14158 = LINE('',#14159,#14160);+#14159 = CARTESIAN_POINT('',(-0.173347981771,-6.192220052083E-02,+ 1.6000001));+#14160 = VECTOR('',#14161,1.);+#14161 = DIRECTION('',(-0.,-0.,-1.));+#14162 = PCURVE('',#5119,#14163);+#14163 = DEFINITIONAL_REPRESENTATION('',(#14164),#14168);+#14164 = LINE('',#14165,#14166);+#14165 = CARTESIAN_POINT('',(0.,0.));+#14166 = VECTOR('',#14167,1.);+#14167 = DIRECTION('',(0.,-1.));+#14168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14169 = PCURVE('',#5083,#14170);+#14170 = DEFINITIONAL_REPRESENTATION('',(#14171),#14175);+#14171 = LINE('',#14172,#14173);+#14172 = CARTESIAN_POINT('',(1.,0.));+#14173 = VECTOR('',#14174,1.);+#14174 = DIRECTION('',(0.,-1.));+#14175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14176 = ORIENTED_EDGE('',*,*,#13909,.T.);+#14177 = ORIENTED_EDGE('',*,*,#14129,.F.);+#14178 = ADVANCED_FACE('',(#14179),#5083,.T.);+#14179 = FACE_BOUND('',#14180,.T.);+#14180 = EDGE_LOOP('',(#14181,#14182,#14203,#14204));+#14181 = ORIENTED_EDGE('',*,*,#5063,.T.);+#14182 = ORIENTED_EDGE('',*,*,#14183,.T.);+#14183 = EDGE_CURVE('',#5037,#13864,#14184,.T.);+#14184 = SURFACE_CURVE('',#14185,(#14189,#14196),.PCURVE_S1.);+#14185 = LINE('',#14186,#14187);+#14186 = CARTESIAN_POINT('',(-0.194425455729,-5.343424479167E-02,+ 1.6000001));+#14187 = VECTOR('',#14188,1.);+#14188 = DIRECTION('',(-0.,-0.,-1.));+#14189 = PCURVE('',#5083,#14190);+#14190 = DEFINITIONAL_REPRESENTATION('',(#14191),#14195);+#14191 = LINE('',#14192,#14193);+#14192 = CARTESIAN_POINT('',(0.,0.));+#14193 = VECTOR('',#14194,1.);+#14194 = DIRECTION('',(0.,-1.));+#14195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14196 = PCURVE('',#5052,#14197);+#14197 = DEFINITIONAL_REPRESENTATION('',(#14198),#14202);+#14198 = LINE('',#14199,#14200);+#14199 = CARTESIAN_POINT('',(2.335611979167E-02,0.));+#14200 = VECTOR('',#14201,1.);+#14201 = DIRECTION('',(0.,-1.));+#14202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14203 = ORIENTED_EDGE('',*,*,#13886,.T.);+#14204 = ORIENTED_EDGE('',*,*,#14156,.F.);+#14205 = ADVANCED_FACE('',(#14206),#5052,.T.);+#14206 = FACE_BOUND('',#14207,.T.);+#14207 = EDGE_LOOP('',(#14208,#14209,#14230,#14231));+#14208 = ORIENTED_EDGE('',*,*,#5036,.F.);+#14209 = ORIENTED_EDGE('',*,*,#14210,.T.);+#14210 = EDGE_CURVE('',#5001,#13841,#14211,.T.);+#14211 = SURFACE_CURVE('',#14212,(#14216,#14223),.PCURVE_S1.);+#14212 = LINE('',#14213,#14214);+#14213 = CARTESIAN_POINT('',(-0.194425455729,-7.679036458333E-02,+ 1.6000001));+#14214 = VECTOR('',#14215,1.);+#14215 = DIRECTION('',(-0.,-0.,-1.));+#14216 = PCURVE('',#5052,#14217);+#14217 = DEFINITIONAL_REPRESENTATION('',(#14218),#14222);+#14218 = LINE('',#14219,#14220);+#14219 = CARTESIAN_POINT('',(0.,0.));+#14220 = VECTOR('',#14221,1.);+#14221 = DIRECTION('',(0.,-1.));+#14222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14223 = PCURVE('',#5020,#14224);+#14224 = DEFINITIONAL_REPRESENTATION('',(#14225),#14229);+#14225 = LINE('',#14226,#14227);+#14226 = CARTESIAN_POINT('',(1.,0.));+#14227 = VECTOR('',#14228,1.);+#14228 = DIRECTION('',(0.,-1.));+#14229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14230 = ORIENTED_EDGE('',*,*,#13863,.T.);+#14231 = ORIENTED_EDGE('',*,*,#14183,.F.);+#14232 = ADVANCED_FACE('',(#14233),#5020,.T.);+#14233 = FACE_BOUND('',#14234,.T.);+#14234 = EDGE_LOOP('',(#14235,#14236,#14257,#14258));+#14235 = ORIENTED_EDGE('',*,*,#5000,.T.);+#14236 = ORIENTED_EDGE('',*,*,#14237,.T.);+#14237 = EDGE_CURVE('',#4965,#13818,#14238,.T.);+#14238 = SURFACE_CURVE('',#14239,(#14243,#14250),.PCURVE_S1.);+#14239 = LINE('',#14240,#14241);+#14240 = CARTESIAN_POINT('',(-0.17431640625,-8.225911458333E-02,+ 1.6000001));+#14241 = VECTOR('',#14242,1.);+#14242 = DIRECTION('',(-0.,-0.,-1.));+#14243 = PCURVE('',#5020,#14244);+#14244 = DEFINITIONAL_REPRESENTATION('',(#14245),#14249);+#14245 = LINE('',#14246,#14247);+#14246 = CARTESIAN_POINT('',(0.,0.));+#14247 = VECTOR('',#14248,1.);+#14248 = DIRECTION('',(0.,-1.));+#14249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14250 = PCURVE('',#4984,#14251);+#14251 = DEFINITIONAL_REPRESENTATION('',(#14252),#14256);+#14252 = LINE('',#14253,#14254);+#14253 = CARTESIAN_POINT('',(1.,0.));+#14254 = VECTOR('',#14255,1.);+#14255 = DIRECTION('',(0.,-1.));+#14256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14257 = ORIENTED_EDGE('',*,*,#13840,.T.);+#14258 = ORIENTED_EDGE('',*,*,#14210,.F.);+#14259 = ADVANCED_FACE('',(#14260),#4984,.T.);+#14260 = FACE_BOUND('',#14261,.T.);+#14261 = EDGE_LOOP('',(#14262,#14263,#14284,#14285));+#14262 = ORIENTED_EDGE('',*,*,#4964,.T.);+#14263 = ORIENTED_EDGE('',*,*,#14264,.T.);+#14264 = EDGE_CURVE('',#4929,#13795,#14265,.T.);+#14265 = SURFACE_CURVE('',#14266,(#14270,#14277),.PCURVE_S1.);+#14266 = LINE('',#14267,#14268);+#14267 = CARTESIAN_POINT('',(-0.149536132812,-8.408203125E-02,1.6000001)+ );+#14268 = VECTOR('',#14269,1.);+#14269 = DIRECTION('',(-0.,-0.,-1.));+#14270 = PCURVE('',#4984,#14271);+#14271 = DEFINITIONAL_REPRESENTATION('',(#14272),#14276);+#14272 = LINE('',#14273,#14274);+#14273 = CARTESIAN_POINT('',(0.,0.));+#14274 = VECTOR('',#14275,1.);+#14275 = DIRECTION('',(0.,-1.));+#14276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14277 = PCURVE('',#4948,#14278);+#14278 = DEFINITIONAL_REPRESENTATION('',(#14279),#14283);+#14279 = LINE('',#14280,#14281);+#14280 = CARTESIAN_POINT('',(1.,0.));+#14281 = VECTOR('',#14282,1.);+#14282 = DIRECTION('',(0.,-1.));+#14283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14284 = ORIENTED_EDGE('',*,*,#13817,.T.);+#14285 = ORIENTED_EDGE('',*,*,#14237,.F.);+#14286 = ADVANCED_FACE('',(#14287),#4948,.T.);+#14287 = FACE_BOUND('',#14288,.T.);+#14288 = EDGE_LOOP('',(#14289,#14290,#14311,#14312));+#14289 = ORIENTED_EDGE('',*,*,#4928,.T.);+#14290 = ORIENTED_EDGE('',*,*,#14291,.T.);+#14291 = EDGE_CURVE('',#4884,#13772,#14292,.T.);+#14292 = SURFACE_CURVE('',#14293,(#14297,#14304),.PCURVE_S1.);+#14293 = LINE('',#14294,#14295);+#14294 = CARTESIAN_POINT('',(-0.105159505208,-6.858723958333E-02,+ 1.6000001));+#14295 = VECTOR('',#14296,1.);+#14296 = DIRECTION('',(-0.,-0.,-1.));+#14297 = PCURVE('',#4948,#14298);+#14298 = DEFINITIONAL_REPRESENTATION('',(#14299),#14303);+#14299 = LINE('',#14300,#14301);+#14300 = CARTESIAN_POINT('',(0.,0.));+#14301 = VECTOR('',#14302,1.);+#14302 = DIRECTION('',(0.,-1.));+#14303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14304 = PCURVE('',#4909,#14305);+#14305 = DEFINITIONAL_REPRESENTATION('',(#14306),#14310);+#14306 = LINE('',#14307,#14308);+#14307 = CARTESIAN_POINT('',(1.,0.));+#14308 = VECTOR('',#14309,1.);+#14309 = DIRECTION('',(0.,-1.));+#14310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14311 = ORIENTED_EDGE('',*,*,#13794,.T.);+#14312 = ORIENTED_EDGE('',*,*,#14264,.F.);+#14313 = ADVANCED_FACE('',(#14314),#4909,.T.);+#14314 = FACE_BOUND('',#14315,.T.);+#14315 = EDGE_LOOP('',(#14316,#14317,#14338,#14339));+#14316 = ORIENTED_EDGE('',*,*,#4883,.T.);+#14317 = ORIENTED_EDGE('',*,*,#14318,.T.);+#14318 = EDGE_CURVE('',#4848,#13749,#14319,.T.);+#14319 = SURFACE_CURVE('',#14320,(#14324,#14331),.PCURVE_S1.);+#14320 = LINE('',#14321,#14322);+#14321 = CARTESIAN_POINT('',(-8.892415364583E-02,-2.620442708333E-02,+ 1.6000001));+#14322 = VECTOR('',#14323,1.);+#14323 = DIRECTION('',(-0.,-0.,-1.));+#14324 = PCURVE('',#4909,#14325);+#14325 = DEFINITIONAL_REPRESENTATION('',(#14326),#14330);+#14326 = LINE('',#14327,#14328);+#14327 = CARTESIAN_POINT('',(0.,0.));+#14328 = VECTOR('',#14329,1.);+#14329 = DIRECTION('',(0.,-1.));+#14330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14331 = PCURVE('',#4867,#14332);+#14332 = DEFINITIONAL_REPRESENTATION('',(#14333),#14337);+#14333 = LINE('',#14334,#14335);+#14334 = CARTESIAN_POINT('',(1.,0.));+#14335 = VECTOR('',#14336,1.);+#14336 = DIRECTION('',(0.,-1.));+#14337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14338 = ORIENTED_EDGE('',*,*,#13771,.T.);+#14339 = ORIENTED_EDGE('',*,*,#14291,.F.);+#14340 = ADVANCED_FACE('',(#14341),#4867,.T.);+#14341 = FACE_BOUND('',#14342,.T.);+#14342 = EDGE_LOOP('',(#14343,#14344,#14365,#14366));+#14343 = ORIENTED_EDGE('',*,*,#4847,.T.);+#14344 = ORIENTED_EDGE('',*,*,#14345,.T.);+#14345 = EDGE_CURVE('',#4803,#13726,#14346,.T.);+#14346 = SURFACE_CURVE('',#14347,(#14351,#14358),.PCURVE_S1.);+#14347 = LINE('',#14348,#14349);+#14348 = CARTESIAN_POINT('',(-0.104418945312,1.6064453125E-02,1.6000001)+ );+#14349 = VECTOR('',#14350,1.);+#14350 = DIRECTION('',(-0.,-0.,-1.));+#14351 = PCURVE('',#4867,#14352);+#14352 = DEFINITIONAL_REPRESENTATION('',(#14353),#14357);+#14353 = LINE('',#14354,#14355);+#14354 = CARTESIAN_POINT('',(0.,0.));+#14355 = VECTOR('',#14356,1.);+#14356 = DIRECTION('',(0.,-1.));+#14357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14358 = PCURVE('',#4828,#14359);+#14359 = DEFINITIONAL_REPRESENTATION('',(#14360),#14364);+#14360 = LINE('',#14361,#14362);+#14361 = CARTESIAN_POINT('',(1.,0.));+#14362 = VECTOR('',#14363,1.);+#14363 = DIRECTION('',(0.,-1.));+#14364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14365 = ORIENTED_EDGE('',*,*,#13748,.T.);+#14366 = ORIENTED_EDGE('',*,*,#14318,.F.);+#14367 = ADVANCED_FACE('',(#14368),#4828,.T.);+#14368 = FACE_BOUND('',#14369,.T.);+#14369 = EDGE_LOOP('',(#14370,#14371,#14392,#14393));+#14370 = ORIENTED_EDGE('',*,*,#4802,.T.);+#14371 = ORIENTED_EDGE('',*,*,#14372,.T.);+#14372 = EDGE_CURVE('',#4767,#13703,#14373,.T.);+#14373 = SURFACE_CURVE('',#14374,(#14378,#14385),.PCURVE_S1.);+#14374 = LINE('',#14375,#14376);+#14375 = CARTESIAN_POINT('',(-0.146346028646,3.167317708333E-02,+ 1.6000001));+#14376 = VECTOR('',#14377,1.);+#14377 = DIRECTION('',(-0.,-0.,-1.));+#14378 = PCURVE('',#4828,#14379);+#14379 = DEFINITIONAL_REPRESENTATION('',(#14380),#14384);+#14380 = LINE('',#14381,#14382);+#14381 = CARTESIAN_POINT('',(0.,0.));+#14382 = VECTOR('',#14383,1.);+#14383 = DIRECTION('',(0.,-1.));+#14384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14385 = PCURVE('',#4786,#14386);+#14386 = DEFINITIONAL_REPRESENTATION('',(#14387),#14391);+#14387 = LINE('',#14388,#14389);+#14388 = CARTESIAN_POINT('',(1.,0.));+#14389 = VECTOR('',#14390,1.);+#14390 = DIRECTION('',(0.,-1.));+#14391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14392 = ORIENTED_EDGE('',*,*,#13725,.T.);+#14393 = ORIENTED_EDGE('',*,*,#14345,.F.);+#14394 = ADVANCED_FACE('',(#14395),#4786,.T.);+#14395 = FACE_BOUND('',#14396,.T.);+#14396 = EDGE_LOOP('',(#14397,#14398,#14419,#14420));+#14397 = ORIENTED_EDGE('',*,*,#4766,.T.);+#14398 = ORIENTED_EDGE('',*,*,#14399,.T.);+#14399 = EDGE_CURVE('',#4731,#13680,#14400,.T.);+#14400 = SURFACE_CURVE('',#14401,(#14405,#14412),.PCURVE_S1.);+#14401 = LINE('',#14402,#14403);+#14402 = CARTESIAN_POINT('',(-0.156315104167,3.081868489583E-02,+ 1.6000001));+#14403 = VECTOR('',#14404,1.);+#14404 = DIRECTION('',(-0.,-0.,-1.));+#14405 = PCURVE('',#4786,#14406);+#14406 = DEFINITIONAL_REPRESENTATION('',(#14407),#14411);+#14407 = LINE('',#14408,#14409);+#14408 = CARTESIAN_POINT('',(0.,0.));+#14409 = VECTOR('',#14410,1.);+#14410 = DIRECTION('',(0.,-1.));+#14411 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14412 = PCURVE('',#4750,#14413);+#14413 = DEFINITIONAL_REPRESENTATION('',(#14414),#14418);+#14414 = LINE('',#14415,#14416);+#14415 = CARTESIAN_POINT('',(1.,0.));+#14416 = VECTOR('',#14417,1.);+#14417 = DIRECTION('',(0.,-1.));+#14418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14419 = ORIENTED_EDGE('',*,*,#13702,.T.);+#14420 = ORIENTED_EDGE('',*,*,#14372,.F.);+#14421 = ADVANCED_FACE('',(#14422),#4750,.T.);+#14422 = FACE_BOUND('',#14423,.T.);+#14423 = EDGE_LOOP('',(#14424,#14425,#14446,#14447));+#14424 = ORIENTED_EDGE('',*,*,#4730,.T.);+#14425 = ORIENTED_EDGE('',*,*,#14426,.T.);+#14426 = EDGE_CURVE('',#4704,#13657,#14427,.T.);+#14427 = SURFACE_CURVE('',#14428,(#14432,#14439),.PCURVE_S1.);+#14428 = LINE('',#14429,#14430);+#14429 = CARTESIAN_POINT('',(-0.166170247396,2.814127604167E-02,+ 1.6000001));+#14430 = VECTOR('',#14431,1.);+#14431 = DIRECTION('',(-0.,-0.,-1.));+#14432 = PCURVE('',#4750,#14433);+#14433 = DEFINITIONAL_REPRESENTATION('',(#14434),#14438);+#14434 = LINE('',#14435,#14436);+#14435 = CARTESIAN_POINT('',(0.,0.));+#14436 = VECTOR('',#14437,1.);+#14437 = DIRECTION('',(0.,-1.));+#14438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14439 = PCURVE('',#4719,#14440);+#14440 = DEFINITIONAL_REPRESENTATION('',(#14441),#14445);+#14441 = LINE('',#14442,#14443);+#14442 = CARTESIAN_POINT('',(4.181315104167E-02,0.));+#14443 = VECTOR('',#14444,1.);+#14444 = DIRECTION('',(0.,-1.));+#14445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14446 = ORIENTED_EDGE('',*,*,#13679,.T.);+#14447 = ORIENTED_EDGE('',*,*,#14399,.F.);+#14448 = ADVANCED_FACE('',(#14449),#4719,.T.);+#14449 = FACE_BOUND('',#14450,.T.);+#14450 = EDGE_LOOP('',(#14451,#14452,#14473,#14474));+#14451 = ORIENTED_EDGE('',*,*,#4703,.F.);+#14452 = ORIENTED_EDGE('',*,*,#14453,.T.);+#14453 = EDGE_CURVE('',#4677,#13634,#14454,.T.);+#14454 = SURFACE_CURVE('',#14455,(#14459,#14466),.PCURVE_S1.);+#14455 = LINE('',#14456,#14457);+#14456 = CARTESIAN_POINT('',(-0.166170247396,6.995442708333E-02,+ 1.6000001));+#14457 = VECTOR('',#14458,1.);+#14458 = DIRECTION('',(-0.,-0.,-1.));+#14459 = PCURVE('',#4719,#14460);+#14460 = DEFINITIONAL_REPRESENTATION('',(#14461),#14465);+#14461 = LINE('',#14462,#14463);+#14462 = CARTESIAN_POINT('',(0.,0.));+#14463 = VECTOR('',#14464,1.);+#14464 = DIRECTION('',(0.,-1.));+#14465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14466 = PCURVE('',#4692,#14467);+#14467 = DEFINITIONAL_REPRESENTATION('',(#14468),#14472);+#14468 = LINE('',#14469,#14470);+#14469 = CARTESIAN_POINT('',(6.516927083333E-02,0.));+#14470 = VECTOR('',#14471,1.);+#14471 = DIRECTION('',(0.,-1.));+#14472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14473 = ORIENTED_EDGE('',*,*,#13656,.T.);+#14474 = ORIENTED_EDGE('',*,*,#14426,.F.);+#14475 = ADVANCED_FACE('',(#14476),#4692,.T.);+#14476 = FACE_BOUND('',#14477,.T.);+#14477 = EDGE_LOOP('',(#14478,#14479,#14500,#14501));+#14478 = ORIENTED_EDGE('',*,*,#4676,.F.);+#14479 = ORIENTED_EDGE('',*,*,#14480,.T.);+#14480 = EDGE_CURVE('',#4650,#13611,#14481,.T.);+#14481 = SURFACE_CURVE('',#14482,(#14486,#14493),.PCURVE_S1.);+#14482 = LINE('',#14483,#14484);+#14483 = CARTESIAN_POINT('',(-0.101000976562,6.995442708333E-02,+ 1.6000001));+#14484 = VECTOR('',#14485,1.);+#14485 = DIRECTION('',(-0.,-0.,-1.));+#14486 = PCURVE('',#4692,#14487);+#14487 = DEFINITIONAL_REPRESENTATION('',(#14488),#14492);+#14488 = LINE('',#14489,#14490);+#14489 = CARTESIAN_POINT('',(0.,0.));+#14490 = VECTOR('',#14491,1.);+#14491 = DIRECTION('',(0.,-1.));+#14492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14493 = PCURVE('',#4665,#14494);+#14494 = DEFINITIONAL_REPRESENTATION('',(#14495),#14499);+#14495 = LINE('',#14496,#14497);+#14496 = CARTESIAN_POINT('',(1.936848958333E-02,0.));+#14497 = VECTOR('',#14498,1.);+#14498 = DIRECTION('',(0.,-1.));+#14499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14500 = ORIENTED_EDGE('',*,*,#13633,.T.);+#14501 = ORIENTED_EDGE('',*,*,#14453,.F.);+#14502 = ADVANCED_FACE('',(#14503),#4665,.T.);+#14503 = FACE_BOUND('',#14504,.T.);+#14504 = EDGE_LOOP('',(#14505,#14506,#14527,#14528));+#14505 = ORIENTED_EDGE('',*,*,#4649,.F.);+#14506 = ORIENTED_EDGE('',*,*,#14507,.T.);+#14507 = EDGE_CURVE('',#4623,#13588,#14508,.T.);+#14508 = SURFACE_CURVE('',#14509,(#14513,#14520),.PCURVE_S1.);+#14509 = LINE('',#14510,#14511);+#14510 = CARTESIAN_POINT('',(-0.101000976562,8.932291666667E-02,+ 1.6000001));+#14511 = VECTOR('',#14512,1.);+#14512 = DIRECTION('',(-0.,-0.,-1.));+#14513 = PCURVE('',#4665,#14514);+#14514 = DEFINITIONAL_REPRESENTATION('',(#14515),#14519);+#14515 = LINE('',#14516,#14517);+#14516 = CARTESIAN_POINT('',(0.,0.));+#14517 = VECTOR('',#14518,1.);+#14518 = DIRECTION('',(0.,-1.));+#14519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14520 = PCURVE('',#4638,#14521);+#14521 = DEFINITIONAL_REPRESENTATION('',(#14522),#14526);+#14522 = LINE('',#14523,#14524);+#14523 = CARTESIAN_POINT('',(8.61328125E-02,0.));+#14524 = VECTOR('',#14525,1.);+#14525 = DIRECTION('',(0.,-1.));+#14526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14527 = ORIENTED_EDGE('',*,*,#13610,.T.);+#14528 = ORIENTED_EDGE('',*,*,#14480,.F.);+#14529 = ADVANCED_FACE('',(#14530),#4638,.T.);+#14530 = FACE_BOUND('',#14531,.T.);+#14531 = EDGE_LOOP('',(#14532,#14533,#14554,#14555));+#14532 = ORIENTED_EDGE('',*,*,#4622,.F.);+#14533 = ORIENTED_EDGE('',*,*,#14534,.T.);+#14534 = EDGE_CURVE('',#4596,#13565,#14535,.T.);+#14535 = SURFACE_CURVE('',#14536,(#14540,#14547),.PCURVE_S1.);+#14536 = LINE('',#14537,#14538);+#14537 = CARTESIAN_POINT('',(-0.187133789062,8.932291666667E-02,+ 1.6000001));+#14538 = VECTOR('',#14539,1.);+#14539 = DIRECTION('',(-0.,-0.,-1.));+#14540 = PCURVE('',#4638,#14541);+#14541 = DEFINITIONAL_REPRESENTATION('',(#14542),#14546);+#14542 = LINE('',#14543,#14544);+#14543 = CARTESIAN_POINT('',(0.,0.));+#14544 = VECTOR('',#14545,1.);+#14545 = DIRECTION('',(0.,-1.));+#14546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14547 = PCURVE('',#4611,#14548);+#14548 = DEFINITIONAL_REPRESENTATION('',(#14549),#14553);+#14549 = LINE('',#14550,#14551);+#14550 = CARTESIAN_POINT('',(8.544921875E-02,0.));+#14551 = VECTOR('',#14552,1.);+#14552 = DIRECTION('',(0.,-1.));+#14553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14554 = ORIENTED_EDGE('',*,*,#13587,.T.);+#14555 = ORIENTED_EDGE('',*,*,#14507,.F.);+#14556 = ADVANCED_FACE('',(#14557),#4611,.T.);+#14557 = FACE_BOUND('',#14558,.T.);+#14558 = EDGE_LOOP('',(#14559,#14560,#14581,#14582));+#14559 = ORIENTED_EDGE('',*,*,#4595,.F.);+#14560 = ORIENTED_EDGE('',*,*,#14561,.T.);+#14561 = EDGE_CURVE('',#4558,#13563,#14562,.T.);+#14562 = SURFACE_CURVE('',#14563,(#14567,#14574),.PCURVE_S1.);+#14563 = LINE('',#14564,#14565);+#14564 = CARTESIAN_POINT('',(-0.187133789062,3.873697916667E-03,+ 1.6000001));+#14565 = VECTOR('',#14566,1.);+#14566 = DIRECTION('',(-0.,-0.,-1.));+#14567 = PCURVE('',#4611,#14568);+#14568 = DEFINITIONAL_REPRESENTATION('',(#14569),#14573);+#14569 = LINE('',#14570,#14571);+#14570 = CARTESIAN_POINT('',(0.,0.));+#14571 = VECTOR('',#14572,1.);+#14572 = DIRECTION('',(0.,-1.));+#14573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14574 = PCURVE('',#4579,#14575);+#14575 = DEFINITIONAL_REPRESENTATION('',(#14576),#14580);+#14576 = LINE('',#14577,#14578);+#14577 = CARTESIAN_POINT('',(1.,0.));+#14578 = VECTOR('',#14579,1.);+#14579 = DIRECTION('',(0.,-1.));+#14580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14581 = ORIENTED_EDGE('',*,*,#13562,.T.);+#14582 = ORIENTED_EDGE('',*,*,#14534,.F.);+#14583 = ADVANCED_FACE('',(#14584),#4579,.T.);+#14584 = FACE_BOUND('',#14585,.T.);+#14585 = EDGE_LOOP('',(#14586,#14587,#14588,#14589));+#14586 = ORIENTED_EDGE('',*,*,#4557,.T.);+#14587 = ORIENTED_EDGE('',*,*,#13538,.T.);+#14588 = ORIENTED_EDGE('',*,*,#14023,.T.);+#14589 = ORIENTED_EDGE('',*,*,#14561,.F.);+#14590 = ADVANCED_FACE('',(#14591),#4539,.T.);+#14591 = FACE_BOUND('',#14592,.T.);+#14592 = EDGE_LOOP('',(#14593,#14594,#14617,#14645));+#14593 = ORIENTED_EDGE('',*,*,#4521,.T.);+#14594 = ORIENTED_EDGE('',*,*,#14595,.T.);+#14595 = EDGE_CURVE('',#4486,#14596,#14598,.T.);+#14596 = VERTEX_POINT('',#14597);+#14597 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.5000001)+ );+#14598 = SURFACE_CURVE('',#14599,(#14603,#14610),.PCURVE_S1.);+#14599 = LINE('',#14600,#14601);+#14600 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.6000001)+ );+#14601 = VECTOR('',#14602,1.);+#14602 = DIRECTION('',(-0.,-0.,-1.));+#14603 = PCURVE('',#4539,#14604);+#14604 = DEFINITIONAL_REPRESENTATION('',(#14605),#14609);+#14605 = LINE('',#14606,#14607);+#14606 = CARTESIAN_POINT('',(0.,0.));+#14607 = VECTOR('',#14608,1.);+#14608 = DIRECTION('',(0.,-1.));+#14609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14610 = PCURVE('',#4505,#14611);+#14611 = DEFINITIONAL_REPRESENTATION('',(#14612),#14616);+#14612 = LINE('',#14613,#14614);+#14613 = CARTESIAN_POINT('',(1.,0.));+#14614 = VECTOR('',#14615,1.);+#14615 = DIRECTION('',(0.,-1.));+#14616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14617 = ORIENTED_EDGE('',*,*,#14618,.T.);+#14618 = EDGE_CURVE('',#14596,#14619,#14621,.T.);+#14619 = VERTEX_POINT('',#14620);+#14620 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.5000001+ ));+#14621 = SURFACE_CURVE('',#14622,(#14626,#14633),.PCURVE_S1.);+#14622 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14623,#14624,#14625),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14623 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.5000001)+ );+#14624 = CARTESIAN_POINT('',(-0.259594726563,-9.114583333333E-03,+ 1.5000001));+#14625 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.5000001+ ));+#14626 = PCURVE('',#4539,#14627);+#14627 = DEFINITIONAL_REPRESENTATION('',(#14628),#14632);+#14628 = LINE('',#14629,#14630);+#14629 = CARTESIAN_POINT('',(0.,-0.1));+#14630 = VECTOR('',#14631,1.);+#14631 = DIRECTION('',(1.,0.));+#14632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14633 = PCURVE('',#14634,#14639);+#14634 = PLANE('',#14635);+#14635 = AXIS2_PLACEMENT_3D('',#14636,#14637,#14638);+#14636 = CARTESIAN_POINT('',(-0.351196289063,-8.077799479167E-02,+ 1.5000001));+#14637 = DIRECTION('',(0.,0.,1.));+#14638 = DIRECTION('',(1.,0.,0.));+#14639 = DEFINITIONAL_REPRESENTATION('',(#14640),#14644);+#14640 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14641,#14642,#14643),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14641 = CARTESIAN_POINT('',(9.798177083333E-02,7.906901041667E-02));+#14642 = CARTESIAN_POINT('',(9.16015625E-02,7.166341145833E-02));+#14643 = CARTESIAN_POINT('',(7.94677734375E-02,5.856119791667E-02));+#14644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14645 = ORIENTED_EDGE('',*,*,#14646,.F.);+#14646 = EDGE_CURVE('',#3838,#14619,#14647,.T.);+#14647 = SURFACE_CURVE('',#14648,(#14652,#14659),.PCURVE_S1.);+#14648 = LINE('',#14649,#14650);+#14649 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.6000001+ ));+#14650 = VECTOR('',#14651,1.);+#14651 = DIRECTION('',(-0.,-0.,-1.));+#14652 = PCURVE('',#4539,#14653);+#14653 = DEFINITIONAL_REPRESENTATION('',(#14654),#14658);+#14654 = LINE('',#14655,#14656);+#14655 = CARTESIAN_POINT('',(1.,0.));+#14656 = VECTOR('',#14657,1.);+#14657 = DIRECTION('',(0.,-1.));+#14658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14659 = PCURVE('',#3857,#14660);+#14660 = DEFINITIONAL_REPRESENTATION('',(#14661),#14665);+#14661 = LINE('',#14662,#14663);+#14662 = CARTESIAN_POINT('',(0.,0.));+#14663 = VECTOR('',#14664,1.);+#14664 = DIRECTION('',(0.,-1.));+#14665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14666 = ADVANCED_FACE('',(#14667),#14634,.T.);+#14667 = FACE_BOUND('',#14668,.F.);+#14668 = EDGE_LOOP('',(#14669,#14694,#14717,#14740,#14763,#14786,#14809,+ #14832,#14855,#14878,#14901,#14924,#14947,#14970,#14993,#15016,+ #15039,#15062,#15085,#15106,#15107));+#14669 = ORIENTED_EDGE('',*,*,#14670,.T.);+#14670 = EDGE_CURVE('',#14671,#14673,#14675,.T.);+#14671 = VERTEX_POINT('',#14672);+#14672 = CARTESIAN_POINT('',(-0.308699544271,-6.140950520833E-02,+ 1.5000001));+#14673 = VERTEX_POINT('',#14674);+#14674 = CARTESIAN_POINT('',(-0.230541992188,-6.140950520833E-02,+ 1.5000001));+#14675 = SURFACE_CURVE('',#14676,(#14680,#14687),.PCURVE_S1.);+#14676 = LINE('',#14677,#14678);+#14677 = CARTESIAN_POINT('',(-0.308699544271,-6.140950520833E-02,+ 1.5000001));+#14678 = VECTOR('',#14679,1.);+#14679 = DIRECTION('',(1.,0.,0.));+#14680 = PCURVE('',#14634,#14681);+#14681 = DEFINITIONAL_REPRESENTATION('',(#14682),#14686);+#14682 = LINE('',#14683,#14684);+#14683 = CARTESIAN_POINT('',(4.249674479167E-02,1.936848958333E-02));+#14684 = VECTOR('',#14685,1.);+#14685 = DIRECTION('',(1.,0.));+#14686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14687 = PCURVE('',#3889,#14688);+#14688 = DEFINITIONAL_REPRESENTATION('',(#14689),#14693);+#14689 = LINE('',#14690,#14691);+#14690 = CARTESIAN_POINT('',(0.,-0.1));+#14691 = VECTOR('',#14692,1.);+#14692 = DIRECTION('',(1.,0.));+#14693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14694 = ORIENTED_EDGE('',*,*,#14695,.T.);+#14695 = EDGE_CURVE('',#14673,#14696,#14698,.T.);+#14696 = VERTEX_POINT('',#14697);+#14697 = CARTESIAN_POINT('',(-0.230541992188,-8.077799479167E-02,+ 1.5000001));+#14698 = SURFACE_CURVE('',#14699,(#14703,#14710),.PCURVE_S1.);+#14699 = LINE('',#14700,#14701);+#14700 = CARTESIAN_POINT('',(-0.230541992188,-6.140950520833E-02,+ 1.5000001));+#14701 = VECTOR('',#14702,1.);+#14702 = DIRECTION('',(0.,-1.,0.));+#14703 = PCURVE('',#14634,#14704);+#14704 = DEFINITIONAL_REPRESENTATION('',(#14705),#14709);+#14705 = LINE('',#14706,#14707);+#14706 = CARTESIAN_POINT('',(0.120654296875,1.936848958333E-02));+#14707 = VECTOR('',#14708,1.);+#14708 = DIRECTION('',(0.,-1.));+#14709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14710 = PCURVE('',#3916,#14711);+#14711 = DEFINITIONAL_REPRESENTATION('',(#14712),#14716);+#14712 = LINE('',#14713,#14714);+#14713 = CARTESIAN_POINT('',(0.,-0.1));+#14714 = VECTOR('',#14715,1.);+#14715 = DIRECTION('',(1.,0.));+#14716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14717 = ORIENTED_EDGE('',*,*,#14718,.T.);+#14718 = EDGE_CURVE('',#14696,#14719,#14721,.T.);+#14719 = VERTEX_POINT('',#14720);+#14720 = CARTESIAN_POINT('',(-0.333878580729,-8.077799479167E-02,+ 1.5000001));+#14721 = SURFACE_CURVE('',#14722,(#14726,#14733),.PCURVE_S1.);+#14722 = LINE('',#14723,#14724);+#14723 = CARTESIAN_POINT('',(-0.230541992188,-8.077799479167E-02,+ 1.5000001));+#14724 = VECTOR('',#14725,1.);+#14725 = DIRECTION('',(-1.,0.,0.));+#14726 = PCURVE('',#14634,#14727);+#14727 = DEFINITIONAL_REPRESENTATION('',(#14728),#14732);+#14728 = LINE('',#14729,#14730);+#14729 = CARTESIAN_POINT('',(0.120654296875,0.));+#14730 = VECTOR('',#14731,1.);+#14731 = DIRECTION('',(-1.,0.));+#14732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14733 = PCURVE('',#3943,#14734);+#14734 = DEFINITIONAL_REPRESENTATION('',(#14735),#14739);+#14735 = LINE('',#14736,#14737);+#14736 = CARTESIAN_POINT('',(0.,-0.1));+#14737 = VECTOR('',#14738,1.);+#14738 = DIRECTION('',(1.,0.));+#14739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14740 = ORIENTED_EDGE('',*,*,#14741,.T.);+#14741 = EDGE_CURVE('',#14719,#14742,#14744,.T.);+#14742 = VERTEX_POINT('',#14743);+#14743 = CARTESIAN_POINT('',(-0.333878580729,-6.140950520833E-02,+ 1.5000001));+#14744 = SURFACE_CURVE('',#14745,(#14749,#14756),.PCURVE_S1.);+#14745 = LINE('',#14746,#14747);+#14746 = CARTESIAN_POINT('',(-0.333878580729,-8.077799479167E-02,+ 1.5000001));+#14747 = VECTOR('',#14748,1.);+#14748 = DIRECTION('',(0.,1.,0.));+#14749 = PCURVE('',#14634,#14750);+#14750 = DEFINITIONAL_REPRESENTATION('',(#14751),#14755);+#14751 = LINE('',#14752,#14753);+#14752 = CARTESIAN_POINT('',(1.731770833333E-02,0.));+#14753 = VECTOR('',#14754,1.);+#14754 = DIRECTION('',(0.,1.));+#14755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14756 = PCURVE('',#3970,#14757);+#14757 = DEFINITIONAL_REPRESENTATION('',(#14758),#14762);+#14758 = LINE('',#14759,#14760);+#14759 = CARTESIAN_POINT('',(0.,-0.1));+#14760 = VECTOR('',#14761,1.);+#14761 = DIRECTION('',(1.,0.));+#14762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14763 = ORIENTED_EDGE('',*,*,#14764,.T.);+#14764 = EDGE_CURVE('',#14742,#14765,#14767,.T.);+#14765 = VERTEX_POINT('',#14766);+#14766 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,+ 1.5000001));+#14767 = SURFACE_CURVE('',#14768,(#14772,#14779),.PCURVE_S1.);+#14768 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14769,#14770,#14771),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14769 = CARTESIAN_POINT('',(-0.333878580729,-6.140950520833E-02,+ 1.5000001));+#14770 = CARTESIAN_POINT('',(-0.312573242188,-3.896484375E-02,1.5000001)+ );+#14771 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,+ 1.5000001));+#14772 = PCURVE('',#14634,#14773);+#14773 = DEFINITIONAL_REPRESENTATION('',(#14774),#14778);+#14774 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14775,#14776,#14777),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14775 = CARTESIAN_POINT('',(1.731770833333E-02,1.936848958333E-02));+#14776 = CARTESIAN_POINT('',(3.8623046875E-02,4.181315104167E-02));+#14777 = CARTESIAN_POINT('',(5.457356770833E-02,5.901692708333E-02));+#14778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14779 = PCURVE('',#4001,#14780);+#14780 = DEFINITIONAL_REPRESENTATION('',(#14781),#14785);+#14781 = LINE('',#14782,#14783);+#14782 = CARTESIAN_POINT('',(0.,-0.1));+#14783 = VECTOR('',#14784,1.);+#14784 = DIRECTION('',(1.,0.));+#14785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14786 = ORIENTED_EDGE('',*,*,#14787,.T.);+#14787 = EDGE_CURVE('',#14765,#14788,#14790,.T.);+#14788 = VERTEX_POINT('',#14789);+#14789 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,+ 1.5000001));+#14790 = SURFACE_CURVE('',#14791,(#14795,#14802),.PCURVE_S1.);+#14791 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14792,#14793,#14794),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14792 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,+ 1.5000001));+#14793 = CARTESIAN_POINT('',(-0.280672200521,-4.557291666667E-03,+ 1.5000001));+#14794 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,+ 1.5000001));+#14795 = PCURVE('',#14634,#14796);+#14796 = DEFINITIONAL_REPRESENTATION('',(#14797),#14801);+#14797 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14798,#14799,#14800),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14798 = CARTESIAN_POINT('',(5.457356770833E-02,5.901692708333E-02));+#14799 = CARTESIAN_POINT('',(7.052408854167E-02,7.6220703125E-02));+#14800 = CARTESIAN_POINT('',(7.65625E-02,8.328450520833E-02));+#14801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14802 = PCURVE('',#4037,#14803);+#14803 = DEFINITIONAL_REPRESENTATION('',(#14804),#14808);+#14804 = LINE('',#14805,#14806);+#14805 = CARTESIAN_POINT('',(0.,-0.1));+#14806 = VECTOR('',#14807,1.);+#14807 = DIRECTION('',(1.,0.));+#14808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14809 = ORIENTED_EDGE('',*,*,#14810,.T.);+#14810 = EDGE_CURVE('',#14788,#14811,#14813,.T.);+#14811 = VERTEX_POINT('',#14812);+#14812 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,+ 1.5000001));+#14813 = SURFACE_CURVE('',#14814,(#14818,#14825),.PCURVE_S1.);+#14814 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14815,#14816,#14817),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14815 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,+ 1.5000001));+#14816 = CARTESIAN_POINT('',(-0.263240559896,1.640625E-02,1.5000001));+#14817 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,+ 1.5000001));+#14818 = PCURVE('',#14634,#14819);+#14819 = DEFINITIONAL_REPRESENTATION('',(#14820),#14824);+#14820 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14821,#14822,#14823),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14821 = CARTESIAN_POINT('',(7.65625E-02,8.328450520833E-02));+#14822 = CARTESIAN_POINT('',(8.795572916667E-02,9.718424479167E-02));+#14823 = CARTESIAN_POINT('',(9.1943359375E-02,0.105786132813));+#14824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14825 = PCURVE('',#4073,#14826);+#14826 = DEFINITIONAL_REPRESENTATION('',(#14827),#14831);+#14827 = LINE('',#14828,#14829);+#14828 = CARTESIAN_POINT('',(0.,-0.1));+#14829 = VECTOR('',#14830,1.);+#14830 = DIRECTION('',(1.,0.));+#14831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14832 = ORIENTED_EDGE('',*,*,#14833,.T.);+#14833 = EDGE_CURVE('',#14811,#14834,#14836,.T.);+#14834 = VERTEX_POINT('',#14835);+#14835 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,+ 1.5000001));+#14836 = SURFACE_CURVE('',#14837,(#14841,#14848),.PCURVE_S1.);+#14837 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14838,#14839,#14840),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14838 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,+ 1.5000001));+#14839 = CARTESIAN_POINT('',(-0.255265299479,3.361002604167E-02,+ 1.5000001));+#14840 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,+ 1.5000001));+#14841 = PCURVE('',#14634,#14842);+#14842 = DEFINITIONAL_REPRESENTATION('',(#14843),#14847);+#14843 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14844,#14845,#14846),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14844 = CARTESIAN_POINT('',(9.1943359375E-02,0.105786132813));+#14845 = CARTESIAN_POINT('',(9.593098958333E-02,0.114388020833));+#14846 = CARTESIAN_POINT('',(9.593098958333E-02,0.123388671875));+#14847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14848 = PCURVE('',#4109,#14849);+#14849 = DEFINITIONAL_REPRESENTATION('',(#14850),#14854);+#14850 = LINE('',#14851,#14852);+#14851 = CARTESIAN_POINT('',(0.,-0.1));+#14852 = VECTOR('',#14853,1.);+#14853 = DIRECTION('',(1.,0.));+#14854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14855 = ORIENTED_EDGE('',*,*,#14856,.T.);+#14856 = EDGE_CURVE('',#14834,#14857,#14859,.T.);+#14857 = VERTEX_POINT('',#14858);+#14858 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.5000001)+ );+#14859 = SURFACE_CURVE('',#14860,(#14864,#14871),.PCURVE_S1.);+#14860 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14861,#14862,#14863),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14861 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,+ 1.5000001));+#14862 = CARTESIAN_POINT('',(-0.255265299479,5.685221354167E-02,+ 1.5000001));+#14863 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.5000001)+ );+#14864 = PCURVE('',#14634,#14865);+#14865 = DEFINITIONAL_REPRESENTATION('',(#14866),#14870);+#14866 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14867,#14868,#14869),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14867 = CARTESIAN_POINT('',(9.593098958333E-02,0.123388671875));+#14868 = CARTESIAN_POINT('',(9.593098958333E-02,0.137630208333));+#14869 = CARTESIAN_POINT('',(8.755696614583E-02,0.145719401042));+#14870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14871 = PCURVE('',#4145,#14872);+#14872 = DEFINITIONAL_REPRESENTATION('',(#14873),#14877);+#14873 = LINE('',#14874,#14875);+#14874 = CARTESIAN_POINT('',(0.,-0.1));+#14875 = VECTOR('',#14876,1.);+#14876 = DIRECTION('',(1.,0.));+#14877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14878 = ORIENTED_EDGE('',*,*,#14879,.T.);+#14879 = EDGE_CURVE('',#14857,#14880,#14882,.T.);+#14880 = VERTEX_POINT('',#14881);+#14881 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,+ 1.5000001));+#14882 = SURFACE_CURVE('',#14883,(#14887,#14894),.PCURVE_S1.);+#14883 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14884,#14885,#14886),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14884 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.5000001)+ );+#14885 = CARTESIAN_POINT('',(-0.272013346354,7.303059895833E-02,+ 1.5000001));+#14886 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,+ 1.5000001));+#14887 = PCURVE('',#14634,#14888);+#14888 = DEFINITIONAL_REPRESENTATION('',(#14889),#14893);+#14889 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14890,#14891,#14892),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14890 = CARTESIAN_POINT('',(8.755696614583E-02,0.145719401042));+#14891 = CARTESIAN_POINT('',(7.918294270833E-02,0.15380859375));+#14892 = CARTESIAN_POINT('',(6.4599609375E-02,0.15380859375));+#14893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14894 = PCURVE('',#4181,#14895);+#14895 = DEFINITIONAL_REPRESENTATION('',(#14896),#14900);+#14896 = LINE('',#14897,#14898);+#14897 = CARTESIAN_POINT('',(0.,-0.1));+#14898 = VECTOR('',#14899,1.);+#14899 = DIRECTION('',(1.,0.));+#14900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14901 = ORIENTED_EDGE('',*,*,#14902,.T.);+#14902 = EDGE_CURVE('',#14880,#14903,#14905,.T.);+#14903 = VERTEX_POINT('',#14904);+#14904 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,+ 1.5000001));+#14905 = SURFACE_CURVE('',#14906,(#14910,#14917),.PCURVE_S1.);+#14906 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14907,#14908,#14909),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14907 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,+ 1.5000001));+#14908 = CARTESIAN_POINT('',(-0.296964518229,7.303059895833E-02,+ 1.5000001));+#14909 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,+ 1.5000001));+#14910 = PCURVE('',#14634,#14911);+#14911 = DEFINITIONAL_REPRESENTATION('',(#14912),#14916);+#14912 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14913,#14914,#14915),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14913 = CARTESIAN_POINT('',(6.4599609375E-02,0.15380859375));+#14914 = CARTESIAN_POINT('',(5.423177083333E-02,0.15380859375));+#14915 = CARTESIAN_POINT('',(4.283854166667E-02,0.150048828125));+#14916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14917 = PCURVE('',#4217,#14918);+#14918 = DEFINITIONAL_REPRESENTATION('',(#14919),#14923);+#14919 = LINE('',#14920,#14921);+#14920 = CARTESIAN_POINT('',(0.,-0.1));+#14921 = VECTOR('',#14922,1.);+#14922 = DIRECTION('',(1.,0.));+#14923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14924 = ORIENTED_EDGE('',*,*,#14925,.T.);+#14925 = EDGE_CURVE('',#14903,#14926,#14928,.T.);+#14926 = VERTEX_POINT('',#14927);+#14927 = CARTESIAN_POINT('',(-0.332511393229,5.787760416667E-02,+ 1.5000001));+#14928 = SURFACE_CURVE('',#14929,(#14933,#14940),.PCURVE_S1.);+#14929 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14930,#14931,#14932),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14930 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,+ 1.5000001));+#14931 = CARTESIAN_POINT('',(-0.319750976563,6.551106770833E-02,+ 1.5000001));+#14932 = CARTESIAN_POINT('',(-0.332511393229,5.787760416667E-02,+ 1.5000001));+#14933 = PCURVE('',#14634,#14934);+#14934 = DEFINITIONAL_REPRESENTATION('',(#14935),#14939);+#14935 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14936,#14937,#14938),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14936 = CARTESIAN_POINT('',(4.283854166667E-02,0.150048828125));+#14937 = CARTESIAN_POINT('',(3.14453125E-02,0.1462890625));+#14938 = CARTESIAN_POINT('',(1.868489583333E-02,0.138655598958));+#14939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14940 = PCURVE('',#4253,#14941);+#14941 = DEFINITIONAL_REPRESENTATION('',(#14942),#14946);+#14942 = LINE('',#14943,#14944);+#14943 = CARTESIAN_POINT('',(0.,-0.1));+#14944 = VECTOR('',#14945,1.);+#14945 = DIRECTION('',(1.,0.));+#14946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14947 = ORIENTED_EDGE('',*,*,#14948,.T.);+#14948 = EDGE_CURVE('',#14926,#14949,#14951,.T.);+#14949 = VERTEX_POINT('',#14950);+#14950 = CARTESIAN_POINT('',(-0.332511393229,8.111979166667E-02,+ 1.5000001));+#14951 = SURFACE_CURVE('',#14952,(#14956,#14963),.PCURVE_S1.);+#14952 = LINE('',#14953,#14954);+#14953 = CARTESIAN_POINT('',(-0.332511393229,5.787760416667E-02,+ 1.5000001));+#14954 = VECTOR('',#14955,1.);+#14955 = DIRECTION('',(0.,1.,0.));+#14956 = PCURVE('',#14634,#14957);+#14957 = DEFINITIONAL_REPRESENTATION('',(#14958),#14962);+#14958 = LINE('',#14959,#14960);+#14959 = CARTESIAN_POINT('',(1.868489583333E-02,0.138655598958));+#14960 = VECTOR('',#14961,1.);+#14961 = DIRECTION('',(0.,1.));+#14962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14963 = PCURVE('',#4285,#14964);+#14964 = DEFINITIONAL_REPRESENTATION('',(#14965),#14969);+#14965 = LINE('',#14966,#14967);+#14966 = CARTESIAN_POINT('',(0.,-0.1));+#14967 = VECTOR('',#14968,1.);+#14968 = DIRECTION('',(1.,0.));+#14969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14970 = ORIENTED_EDGE('',*,*,#14971,.T.);+#14971 = EDGE_CURVE('',#14949,#14972,#14974,.T.);+#14972 = VERTEX_POINT('',#14973);+#14973 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.5000001)+ );+#14974 = SURFACE_CURVE('',#14975,(#14979,#14986),.PCURVE_S1.);+#14975 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14976,#14977,#14978),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14976 = CARTESIAN_POINT('',(-0.332511393229,8.111979166667E-02,+ 1.5000001));+#14977 = CARTESIAN_POINT('',(-0.320776367188,8.670247395833E-02,+ 1.5000001));+#14978 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.5000001)+ );+#14979 = PCURVE('',#14634,#14980);+#14980 = DEFINITIONAL_REPRESENTATION('',(#14981),#14985);+#14981 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14982,#14983,#14984),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14982 = CARTESIAN_POINT('',(1.868489583333E-02,0.161897786458));+#14983 = CARTESIAN_POINT('',(3.0419921875E-02,0.16748046875));+#14984 = CARTESIAN_POINT('',(4.175618489583E-02,0.170328776042));+#14985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14986 = PCURVE('',#4316,#14987);+#14987 = DEFINITIONAL_REPRESENTATION('',(#14988),#14992);+#14988 = LINE('',#14989,#14990);+#14989 = CARTESIAN_POINT('',(0.,-0.1));+#14990 = VECTOR('',#14991,1.);+#14991 = DIRECTION('',(1.,0.));+#14992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#14993 = ORIENTED_EDGE('',*,*,#14994,.T.);+#14994 = EDGE_CURVE('',#14972,#14995,#14997,.T.);+#14995 = VERTEX_POINT('',#14996);+#14996 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,+ 1.5000001));+#14997 = SURFACE_CURVE('',#14998,(#15002,#15009),.PCURVE_S1.);+#14998 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#14999,#15000,#15001),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#14999 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.5000001)+ );+#15000 = CARTESIAN_POINT('',(-0.298103841146,9.239908854167E-02,+ 1.5000001));+#15001 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,+ 1.5000001));+#15002 = PCURVE('',#14634,#15003);+#15003 = DEFINITIONAL_REPRESENTATION('',(#15004),#15008);+#15004 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15005,#15006,#15007),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15005 = CARTESIAN_POINT('',(4.175618489583E-02,0.170328776042));+#15006 = CARTESIAN_POINT('',(5.309244791667E-02,0.173177083333));+#15007 = CARTESIAN_POINT('',(6.414388020833E-02,0.173177083333));+#15008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15009 = PCURVE('',#4352,#15010);+#15010 = DEFINITIONAL_REPRESENTATION('',(#15011),#15015);+#15011 = LINE('',#15012,#15013);+#15012 = CARTESIAN_POINT('',(0.,-0.1));+#15013 = VECTOR('',#15014,1.);+#15014 = DIRECTION('',(1.,0.));+#15015 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15016 = ORIENTED_EDGE('',*,*,#15017,.T.);+#15017 = EDGE_CURVE('',#14995,#15018,#15020,.T.);+#15018 = VERTEX_POINT('',#15019);+#15019 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.5000001+ ));+#15020 = SURFACE_CURVE('',#15021,(#15025,#15032),.PCURVE_S1.);+#15021 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15022,#15023,#15024),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15022 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,+ 1.5000001));+#15023 = CARTESIAN_POINT('',(-0.262101236979,9.239908854167E-02,+ 1.5000001));+#15024 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.5000001+ ));+#15025 = PCURVE('',#14634,#15026);+#15026 = DEFINITIONAL_REPRESENTATION('',(#15027),#15031);+#15027 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15028,#15029,#15030),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15028 = CARTESIAN_POINT('',(6.414388020833E-02,0.173177083333));+#15029 = CARTESIAN_POINT('',(8.909505208333E-02,0.173177083333));+#15030 = CARTESIAN_POINT('',(0.104305013021,0.159903971354));+#15031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15032 = PCURVE('',#4388,#15033);+#15033 = DEFINITIONAL_REPRESENTATION('',(#15034),#15038);+#15034 = LINE('',#15035,#15036);+#15035 = CARTESIAN_POINT('',(0.,-0.1));+#15036 = VECTOR('',#15037,1.);+#15037 = DIRECTION('',(1.,0.));+#15038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15039 = ORIENTED_EDGE('',*,*,#15040,.T.);+#15040 = EDGE_CURVE('',#15018,#15041,#15043,.T.);+#15041 = VERTEX_POINT('',#15042);+#15042 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,+ 1.5000001));+#15043 = SURFACE_CURVE('',#15044,(#15048,#15055),.PCURVE_S1.);+#15044 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15045,#15046,#15047),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15045 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.5000001+ ));+#15046 = CARTESIAN_POINT('',(-0.231681315104,6.585286458333E-02,+ 1.5000001));+#15047 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,+ 1.5000001));+#15048 = PCURVE('',#14634,#15049);+#15049 = DEFINITIONAL_REPRESENTATION('',(#15050),#15054);+#15050 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15051,#15052,#15053),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15051 = CARTESIAN_POINT('',(0.104305013021,0.159903971354));+#15052 = CARTESIAN_POINT('',(0.119514973958,0.146630859375));+#15053 = CARTESIAN_POINT('',(0.119514973958,0.12509765625));+#15054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15055 = PCURVE('',#4430,#15056);+#15056 = DEFINITIONAL_REPRESENTATION('',(#15057),#15061);+#15057 = LINE('',#15058,#15059);+#15058 = CARTESIAN_POINT('',(0.,-0.1));+#15059 = VECTOR('',#15060,1.);+#15060 = DIRECTION('',(1.,0.));+#15061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15062 = ORIENTED_EDGE('',*,*,#15063,.T.);+#15063 = EDGE_CURVE('',#15041,#15064,#15066,.T.);+#15064 = VERTEX_POINT('',#15065);+#15065 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,+ 1.5000001));+#15066 = SURFACE_CURVE('',#15067,(#15071,#15078),.PCURVE_S1.);+#15067 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15068,#15069,#15070),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15068 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,+ 1.5000001));+#15069 = CARTESIAN_POINT('',(-0.231681315104,3.338216145833E-02,+ 1.5000001));+#15070 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,+ 1.5000001));+#15071 = PCURVE('',#14634,#15072);+#15072 = DEFINITIONAL_REPRESENTATION('',(#15073),#15077);+#15073 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15074,#15075,#15076),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15074 = CARTESIAN_POINT('',(0.119514973958,0.12509765625));+#15075 = CARTESIAN_POINT('',(0.119514973958,0.11416015625));+#15076 = CARTESIAN_POINT('',(0.114444986979,0.10322265625));+#15077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15078 = PCURVE('',#4469,#15079);+#15079 = DEFINITIONAL_REPRESENTATION('',(#15080),#15084);+#15080 = LINE('',#15081,#15082);+#15081 = CARTESIAN_POINT('',(0.,-0.1));+#15082 = VECTOR('',#15083,1.);+#15083 = DIRECTION('',(1.,0.));+#15084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15085 = ORIENTED_EDGE('',*,*,#15086,.T.);+#15086 = EDGE_CURVE('',#15064,#14596,#15087,.T.);+#15087 = SURFACE_CURVE('',#15088,(#15092,#15099),.PCURVE_S1.);+#15088 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15089,#15090,#15091),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15089 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,+ 1.5000001));+#15090 = CARTESIAN_POINT('',(-0.241821289063,1.150716145833E-02,+ 1.5000001));+#15091 = CARTESIAN_POINT('',(-0.253214518229,-1.708984375E-03,1.5000001)+ );+#15092 = PCURVE('',#14634,#15093);+#15093 = DEFINITIONAL_REPRESENTATION('',(#15094),#15098);+#15094 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15095,#15096,#15097),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15095 = CARTESIAN_POINT('',(0.114444986979,0.10322265625));+#15096 = CARTESIAN_POINT('',(0.109375,9.228515625E-02));+#15097 = CARTESIAN_POINT('',(9.798177083333E-02,7.906901041667E-02));+#15098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15099 = PCURVE('',#4505,#15100);+#15100 = DEFINITIONAL_REPRESENTATION('',(#15101),#15105);+#15101 = LINE('',#15102,#15103);+#15102 = CARTESIAN_POINT('',(0.,-0.1));+#15103 = VECTOR('',#15104,1.);+#15104 = DIRECTION('',(1.,0.));+#15105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15106 = ORIENTED_EDGE('',*,*,#14618,.T.);+#15107 = ORIENTED_EDGE('',*,*,#15108,.T.);+#15108 = EDGE_CURVE('',#14619,#14671,#15109,.T.);+#15109 = SURFACE_CURVE('',#15110,(#15114,#15121),.PCURVE_S1.);+#15110 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15111,#15112,#15113),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15111 = CARTESIAN_POINT('',(-0.271728515625,-2.2216796875E-02,1.5000001+ ));+#15112 = CARTESIAN_POINT('',(-0.283862304688,-3.531901041667E-02,+ 1.5000001));+#15113 = CARTESIAN_POINT('',(-0.308699544271,-6.140950520833E-02,+ 1.5000001));+#15114 = PCURVE('',#14634,#15115);+#15115 = DEFINITIONAL_REPRESENTATION('',(#15116),#15120);+#15116 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15117,#15118,#15119),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15117 = CARTESIAN_POINT('',(7.94677734375E-02,5.856119791667E-02));+#15118 = CARTESIAN_POINT('',(6.7333984375E-02,4.5458984375E-02));+#15119 = CARTESIAN_POINT('',(4.249674479167E-02,1.936848958333E-02));+#15120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15121 = PCURVE('',#3857,#15122);+#15122 = DEFINITIONAL_REPRESENTATION('',(#15123),#15127);+#15123 = LINE('',#15124,#15125);+#15124 = CARTESIAN_POINT('',(0.,-0.1));+#15125 = VECTOR('',#15126,1.);+#15126 = DIRECTION('',(1.,0.));+#15127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15128 = ADVANCED_FACE('',(#15129),#4505,.T.);+#15129 = FACE_BOUND('',#15130,.T.);+#15130 = EDGE_LOOP('',(#15131,#15132,#15153,#15154));+#15131 = ORIENTED_EDGE('',*,*,#4485,.T.);+#15132 = ORIENTED_EDGE('',*,*,#15133,.T.);+#15133 = EDGE_CURVE('',#4450,#15064,#15134,.T.);+#15134 = SURFACE_CURVE('',#15135,(#15139,#15146),.PCURVE_S1.);+#15135 = LINE('',#15136,#15137);+#15136 = CARTESIAN_POINT('',(-0.236751302083,2.244466145833E-02,+ 1.6000001));+#15137 = VECTOR('',#15138,1.);+#15138 = DIRECTION('',(-0.,-0.,-1.));+#15139 = PCURVE('',#4505,#15140);+#15140 = DEFINITIONAL_REPRESENTATION('',(#15141),#15145);+#15141 = LINE('',#15142,#15143);+#15142 = CARTESIAN_POINT('',(0.,0.));+#15143 = VECTOR('',#15144,1.);+#15144 = DIRECTION('',(0.,-1.));+#15145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15146 = PCURVE('',#4469,#15147);+#15147 = DEFINITIONAL_REPRESENTATION('',(#15148),#15152);+#15148 = LINE('',#15149,#15150);+#15149 = CARTESIAN_POINT('',(1.,0.));+#15150 = VECTOR('',#15151,1.);+#15151 = DIRECTION('',(0.,-1.));+#15152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15153 = ORIENTED_EDGE('',*,*,#15086,.T.);+#15154 = ORIENTED_EDGE('',*,*,#14595,.F.);+#15155 = ADVANCED_FACE('',(#15156),#4469,.T.);+#15156 = FACE_BOUND('',#15157,.T.);+#15157 = EDGE_LOOP('',(#15158,#15159,#15180,#15181));+#15158 = ORIENTED_EDGE('',*,*,#4449,.T.);+#15159 = ORIENTED_EDGE('',*,*,#15160,.T.);+#15160 = EDGE_CURVE('',#4405,#15041,#15161,.T.);+#15161 = SURFACE_CURVE('',#15162,(#15166,#15173),.PCURVE_S1.);+#15162 = LINE('',#15163,#15164);+#15163 = CARTESIAN_POINT('',(-0.231681315104,4.431966145833E-02,+ 1.6000001));+#15164 = VECTOR('',#15165,1.);+#15165 = DIRECTION('',(-0.,-0.,-1.));+#15166 = PCURVE('',#4469,#15167);+#15167 = DEFINITIONAL_REPRESENTATION('',(#15168),#15172);+#15168 = LINE('',#15169,#15170);+#15169 = CARTESIAN_POINT('',(0.,0.));+#15170 = VECTOR('',#15171,1.);+#15171 = DIRECTION('',(0.,-1.));+#15172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15173 = PCURVE('',#4430,#15174);+#15174 = DEFINITIONAL_REPRESENTATION('',(#15175),#15179);+#15175 = LINE('',#15176,#15177);+#15176 = CARTESIAN_POINT('',(1.,0.));+#15177 = VECTOR('',#15178,1.);+#15178 = DIRECTION('',(0.,-1.));+#15179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15180 = ORIENTED_EDGE('',*,*,#15063,.T.);+#15181 = ORIENTED_EDGE('',*,*,#15133,.F.);+#15182 = ADVANCED_FACE('',(#15183),#4430,.T.);+#15183 = FACE_BOUND('',#15184,.T.);+#15184 = EDGE_LOOP('',(#15185,#15186,#15207,#15208));+#15185 = ORIENTED_EDGE('',*,*,#4404,.T.);+#15186 = ORIENTED_EDGE('',*,*,#15187,.T.);+#15187 = EDGE_CURVE('',#4369,#15018,#15188,.T.);+#15188 = SURFACE_CURVE('',#15189,(#15193,#15200),.PCURVE_S1.);+#15189 = LINE('',#15190,#15191);+#15190 = CARTESIAN_POINT('',(-0.246891276042,7.91259765625E-02,1.6000001+ ));+#15191 = VECTOR('',#15192,1.);+#15192 = DIRECTION('',(-0.,-0.,-1.));+#15193 = PCURVE('',#4430,#15194);+#15194 = DEFINITIONAL_REPRESENTATION('',(#15195),#15199);+#15195 = LINE('',#15196,#15197);+#15196 = CARTESIAN_POINT('',(0.,0.));+#15197 = VECTOR('',#15198,1.);+#15198 = DIRECTION('',(0.,-1.));+#15199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15200 = PCURVE('',#4388,#15201);+#15201 = DEFINITIONAL_REPRESENTATION('',(#15202),#15206);+#15202 = LINE('',#15203,#15204);+#15203 = CARTESIAN_POINT('',(1.,0.));+#15204 = VECTOR('',#15205,1.);+#15205 = DIRECTION('',(0.,-1.));+#15206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15207 = ORIENTED_EDGE('',*,*,#15040,.T.);+#15208 = ORIENTED_EDGE('',*,*,#15160,.F.);+#15209 = ADVANCED_FACE('',(#15210),#4388,.T.);+#15210 = FACE_BOUND('',#15211,.T.);+#15211 = EDGE_LOOP('',(#15212,#15213,#15234,#15235));+#15212 = ORIENTED_EDGE('',*,*,#4368,.T.);+#15213 = ORIENTED_EDGE('',*,*,#15214,.T.);+#15214 = EDGE_CURVE('',#4333,#14995,#15215,.T.);+#15215 = SURFACE_CURVE('',#15216,(#15220,#15227),.PCURVE_S1.);+#15216 = LINE('',#15217,#15218);+#15217 = CARTESIAN_POINT('',(-0.287052408854,9.239908854167E-02,+ 1.6000001));+#15218 = VECTOR('',#15219,1.);+#15219 = DIRECTION('',(-0.,-0.,-1.));+#15220 = PCURVE('',#4388,#15221);+#15221 = DEFINITIONAL_REPRESENTATION('',(#15222),#15226);+#15222 = LINE('',#15223,#15224);+#15223 = CARTESIAN_POINT('',(0.,0.));+#15224 = VECTOR('',#15225,1.);+#15225 = DIRECTION('',(0.,-1.));+#15226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15227 = PCURVE('',#4352,#15228);+#15228 = DEFINITIONAL_REPRESENTATION('',(#15229),#15233);+#15229 = LINE('',#15230,#15231);+#15230 = CARTESIAN_POINT('',(1.,0.));+#15231 = VECTOR('',#15232,1.);+#15232 = DIRECTION('',(0.,-1.));+#15233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15234 = ORIENTED_EDGE('',*,*,#15017,.T.);+#15235 = ORIENTED_EDGE('',*,*,#15187,.F.);+#15236 = ADVANCED_FACE('',(#15237),#4352,.T.);+#15237 = FACE_BOUND('',#15238,.T.);+#15238 = EDGE_LOOP('',(#15239,#15240,#15261,#15262));+#15239 = ORIENTED_EDGE('',*,*,#4332,.T.);+#15240 = ORIENTED_EDGE('',*,*,#15241,.T.);+#15241 = EDGE_CURVE('',#4297,#14972,#15242,.T.);+#15242 = SURFACE_CURVE('',#15243,(#15247,#15254),.PCURVE_S1.);+#15243 = LINE('',#15244,#15245);+#15244 = CARTESIAN_POINT('',(-0.309440104167,8.955078125E-02,1.6000001)+ );+#15245 = VECTOR('',#15246,1.);+#15246 = DIRECTION('',(-0.,-0.,-1.));+#15247 = PCURVE('',#4352,#15248);+#15248 = DEFINITIONAL_REPRESENTATION('',(#15249),#15253);+#15249 = LINE('',#15250,#15251);+#15250 = CARTESIAN_POINT('',(0.,0.));+#15251 = VECTOR('',#15252,1.);+#15252 = DIRECTION('',(0.,-1.));+#15253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15254 = PCURVE('',#4316,#15255);+#15255 = DEFINITIONAL_REPRESENTATION('',(#15256),#15260);+#15256 = LINE('',#15257,#15258);+#15257 = CARTESIAN_POINT('',(1.,0.));+#15258 = VECTOR('',#15259,1.);+#15259 = DIRECTION('',(0.,-1.));+#15260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15261 = ORIENTED_EDGE('',*,*,#14994,.T.);+#15262 = ORIENTED_EDGE('',*,*,#15214,.F.);+#15263 = ADVANCED_FACE('',(#15264),#4316,.T.);+#15264 = FACE_BOUND('',#15265,.T.);+#15265 = EDGE_LOOP('',(#15266,#15267,#15288,#15289));+#15266 = ORIENTED_EDGE('',*,*,#4296,.T.);+#15267 = ORIENTED_EDGE('',*,*,#15268,.T.);+#15268 = EDGE_CURVE('',#4270,#14949,#15269,.T.);+#15269 = SURFACE_CURVE('',#15270,(#15274,#15281),.PCURVE_S1.);+#15270 = LINE('',#15271,#15272);+#15271 = CARTESIAN_POINT('',(-0.332511393229,8.111979166667E-02,+ 1.6000001));+#15272 = VECTOR('',#15273,1.);+#15273 = DIRECTION('',(-0.,-0.,-1.));+#15274 = PCURVE('',#4316,#15275);+#15275 = DEFINITIONAL_REPRESENTATION('',(#15276),#15280);+#15276 = LINE('',#15277,#15278);+#15277 = CARTESIAN_POINT('',(0.,0.));+#15278 = VECTOR('',#15279,1.);+#15279 = DIRECTION('',(0.,-1.));+#15280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15281 = PCURVE('',#4285,#15282);+#15282 = DEFINITIONAL_REPRESENTATION('',(#15283),#15287);+#15283 = LINE('',#15284,#15285);+#15284 = CARTESIAN_POINT('',(2.32421875E-02,0.));+#15285 = VECTOR('',#15286,1.);+#15286 = DIRECTION('',(0.,-1.));+#15287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15288 = ORIENTED_EDGE('',*,*,#14971,.T.);+#15289 = ORIENTED_EDGE('',*,*,#15241,.F.);+#15290 = ADVANCED_FACE('',(#15291),#4285,.T.);+#15291 = FACE_BOUND('',#15292,.T.);+#15292 = EDGE_LOOP('',(#15293,#15294,#15315,#15316));+#15293 = ORIENTED_EDGE('',*,*,#4269,.F.);+#15294 = ORIENTED_EDGE('',*,*,#15295,.T.);+#15295 = EDGE_CURVE('',#4234,#14926,#15296,.T.);+#15296 = SURFACE_CURVE('',#15297,(#15301,#15308),.PCURVE_S1.);+#15297 = LINE('',#15298,#15299);+#15298 = CARTESIAN_POINT('',(-0.332511393229,5.787760416667E-02,+ 1.6000001));+#15299 = VECTOR('',#15300,1.);+#15300 = DIRECTION('',(-0.,-0.,-1.));+#15301 = PCURVE('',#4285,#15302);+#15302 = DEFINITIONAL_REPRESENTATION('',(#15303),#15307);+#15303 = LINE('',#15304,#15305);+#15304 = CARTESIAN_POINT('',(0.,0.));+#15305 = VECTOR('',#15306,1.);+#15306 = DIRECTION('',(0.,-1.));+#15307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15308 = PCURVE('',#4253,#15309);+#15309 = DEFINITIONAL_REPRESENTATION('',(#15310),#15314);+#15310 = LINE('',#15311,#15312);+#15311 = CARTESIAN_POINT('',(1.,0.));+#15312 = VECTOR('',#15313,1.);+#15313 = DIRECTION('',(0.,-1.));+#15314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15315 = ORIENTED_EDGE('',*,*,#14948,.T.);+#15316 = ORIENTED_EDGE('',*,*,#15268,.F.);+#15317 = ADVANCED_FACE('',(#15318),#4253,.T.);+#15318 = FACE_BOUND('',#15319,.T.);+#15319 = EDGE_LOOP('',(#15320,#15321,#15342,#15343));+#15320 = ORIENTED_EDGE('',*,*,#4233,.T.);+#15321 = ORIENTED_EDGE('',*,*,#15322,.T.);+#15322 = EDGE_CURVE('',#4198,#14903,#15323,.T.);+#15323 = SURFACE_CURVE('',#15324,(#15328,#15335),.PCURVE_S1.);+#15324 = LINE('',#15325,#15326);+#15325 = CARTESIAN_POINT('',(-0.308357747396,6.927083333333E-02,+ 1.6000001));+#15326 = VECTOR('',#15327,1.);+#15327 = DIRECTION('',(-0.,-0.,-1.));+#15328 = PCURVE('',#4253,#15329);+#15329 = DEFINITIONAL_REPRESENTATION('',(#15330),#15334);+#15330 = LINE('',#15331,#15332);+#15331 = CARTESIAN_POINT('',(0.,0.));+#15332 = VECTOR('',#15333,1.);+#15333 = DIRECTION('',(0.,-1.));+#15334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15335 = PCURVE('',#4217,#15336);+#15336 = DEFINITIONAL_REPRESENTATION('',(#15337),#15341);+#15337 = LINE('',#15338,#15339);+#15338 = CARTESIAN_POINT('',(1.,0.));+#15339 = VECTOR('',#15340,1.);+#15340 = DIRECTION('',(0.,-1.));+#15341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15342 = ORIENTED_EDGE('',*,*,#14925,.T.);+#15343 = ORIENTED_EDGE('',*,*,#15295,.F.);+#15344 = ADVANCED_FACE('',(#15345),#4217,.T.);+#15345 = FACE_BOUND('',#15346,.T.);+#15346 = EDGE_LOOP('',(#15347,#15348,#15369,#15370));+#15347 = ORIENTED_EDGE('',*,*,#4197,.T.);+#15348 = ORIENTED_EDGE('',*,*,#15349,.T.);+#15349 = EDGE_CURVE('',#4162,#14880,#15350,.T.);+#15350 = SURFACE_CURVE('',#15351,(#15355,#15362),.PCURVE_S1.);+#15351 = LINE('',#15352,#15353);+#15352 = CARTESIAN_POINT('',(-0.286596679688,7.303059895833E-02,+ 1.6000001));+#15353 = VECTOR('',#15354,1.);+#15354 = DIRECTION('',(-0.,-0.,-1.));+#15355 = PCURVE('',#4217,#15356);+#15356 = DEFINITIONAL_REPRESENTATION('',(#15357),#15361);+#15357 = LINE('',#15358,#15359);+#15358 = CARTESIAN_POINT('',(0.,0.));+#15359 = VECTOR('',#15360,1.);+#15360 = DIRECTION('',(0.,-1.));+#15361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15362 = PCURVE('',#4181,#15363);+#15363 = DEFINITIONAL_REPRESENTATION('',(#15364),#15368);+#15364 = LINE('',#15365,#15366);+#15365 = CARTESIAN_POINT('',(1.,0.));+#15366 = VECTOR('',#15367,1.);+#15367 = DIRECTION('',(0.,-1.));+#15368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15369 = ORIENTED_EDGE('',*,*,#14902,.T.);+#15370 = ORIENTED_EDGE('',*,*,#15322,.F.);+#15371 = ADVANCED_FACE('',(#15372),#4181,.T.);+#15372 = FACE_BOUND('',#15373,.T.);+#15373 = EDGE_LOOP('',(#15374,#15375,#15396,#15397));+#15374 = ORIENTED_EDGE('',*,*,#4161,.T.);+#15375 = ORIENTED_EDGE('',*,*,#15376,.T.);+#15376 = EDGE_CURVE('',#4126,#14857,#15377,.T.);+#15377 = SURFACE_CURVE('',#15378,(#15382,#15389),.PCURVE_S1.);+#15378 = LINE('',#15379,#15380);+#15379 = CARTESIAN_POINT('',(-0.263639322917,6.494140625E-02,1.6000001)+ );+#15380 = VECTOR('',#15381,1.);+#15381 = DIRECTION('',(-0.,-0.,-1.));+#15382 = PCURVE('',#4181,#15383);+#15383 = DEFINITIONAL_REPRESENTATION('',(#15384),#15388);+#15384 = LINE('',#15385,#15386);+#15385 = CARTESIAN_POINT('',(0.,0.));+#15386 = VECTOR('',#15387,1.);+#15387 = DIRECTION('',(0.,-1.));+#15388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15389 = PCURVE('',#4145,#15390);+#15390 = DEFINITIONAL_REPRESENTATION('',(#15391),#15395);+#15391 = LINE('',#15392,#15393);+#15392 = CARTESIAN_POINT('',(1.,0.));+#15393 = VECTOR('',#15394,1.);+#15394 = DIRECTION('',(0.,-1.));+#15395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15396 = ORIENTED_EDGE('',*,*,#14879,.T.);+#15397 = ORIENTED_EDGE('',*,*,#15349,.F.);+#15398 = ADVANCED_FACE('',(#15399),#4145,.T.);+#15399 = FACE_BOUND('',#15400,.T.);+#15400 = EDGE_LOOP('',(#15401,#15402,#15423,#15424));+#15401 = ORIENTED_EDGE('',*,*,#4125,.T.);+#15402 = ORIENTED_EDGE('',*,*,#15403,.T.);+#15403 = EDGE_CURVE('',#4090,#14834,#15404,.T.);+#15404 = SURFACE_CURVE('',#15405,(#15409,#15416),.PCURVE_S1.);+#15405 = LINE('',#15406,#15407);+#15406 = CARTESIAN_POINT('',(-0.255265299479,4.261067708333E-02,+ 1.6000001));+#15407 = VECTOR('',#15408,1.);+#15408 = DIRECTION('',(-0.,-0.,-1.));+#15409 = PCURVE('',#4145,#15410);+#15410 = DEFINITIONAL_REPRESENTATION('',(#15411),#15415);+#15411 = LINE('',#15412,#15413);+#15412 = CARTESIAN_POINT('',(0.,0.));+#15413 = VECTOR('',#15414,1.);+#15414 = DIRECTION('',(0.,-1.));+#15415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15416 = PCURVE('',#4109,#15417);+#15417 = DEFINITIONAL_REPRESENTATION('',(#15418),#15422);+#15418 = LINE('',#15419,#15420);+#15419 = CARTESIAN_POINT('',(1.,0.));+#15420 = VECTOR('',#15421,1.);+#15421 = DIRECTION('',(0.,-1.));+#15422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15423 = ORIENTED_EDGE('',*,*,#14856,.T.);+#15424 = ORIENTED_EDGE('',*,*,#15376,.F.);+#15425 = ADVANCED_FACE('',(#15426),#4109,.T.);+#15426 = FACE_BOUND('',#15427,.T.);+#15427 = EDGE_LOOP('',(#15428,#15429,#15450,#15451));+#15428 = ORIENTED_EDGE('',*,*,#4089,.T.);+#15429 = ORIENTED_EDGE('',*,*,#15430,.T.);+#15430 = EDGE_CURVE('',#4054,#14811,#15431,.T.);+#15431 = SURFACE_CURVE('',#15432,(#15436,#15443),.PCURVE_S1.);+#15432 = LINE('',#15433,#15434);+#15433 = CARTESIAN_POINT('',(-0.259252929688,2.500813802083E-02,+ 1.6000001));+#15434 = VECTOR('',#15435,1.);+#15435 = DIRECTION('',(-0.,-0.,-1.));+#15436 = PCURVE('',#4109,#15437);+#15437 = DEFINITIONAL_REPRESENTATION('',(#15438),#15442);+#15438 = LINE('',#15439,#15440);+#15439 = CARTESIAN_POINT('',(0.,0.));+#15440 = VECTOR('',#15441,1.);+#15441 = DIRECTION('',(0.,-1.));+#15442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15443 = PCURVE('',#4073,#15444);+#15444 = DEFINITIONAL_REPRESENTATION('',(#15445),#15449);+#15445 = LINE('',#15446,#15447);+#15446 = CARTESIAN_POINT('',(1.,0.));+#15447 = VECTOR('',#15448,1.);+#15448 = DIRECTION('',(0.,-1.));+#15449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15450 = ORIENTED_EDGE('',*,*,#14833,.T.);+#15451 = ORIENTED_EDGE('',*,*,#15403,.F.);+#15452 = ADVANCED_FACE('',(#15453),#4073,.T.);+#15453 = FACE_BOUND('',#15454,.T.);+#15454 = EDGE_LOOP('',(#15455,#15456,#15477,#15478));+#15455 = ORIENTED_EDGE('',*,*,#4053,.T.);+#15456 = ORIENTED_EDGE('',*,*,#15457,.T.);+#15457 = EDGE_CURVE('',#4018,#14788,#15458,.T.);+#15458 = SURFACE_CURVE('',#15459,(#15463,#15470),.PCURVE_S1.);+#15459 = LINE('',#15460,#15461);+#15460 = CARTESIAN_POINT('',(-0.274633789063,2.506510416667E-03,+ 1.6000001));+#15461 = VECTOR('',#15462,1.);+#15462 = DIRECTION('',(-0.,-0.,-1.));+#15463 = PCURVE('',#4073,#15464);+#15464 = DEFINITIONAL_REPRESENTATION('',(#15465),#15469);+#15465 = LINE('',#15466,#15467);+#15466 = CARTESIAN_POINT('',(0.,0.));+#15467 = VECTOR('',#15468,1.);+#15468 = DIRECTION('',(0.,-1.));+#15469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15470 = PCURVE('',#4037,#15471);+#15471 = DEFINITIONAL_REPRESENTATION('',(#15472),#15476);+#15472 = LINE('',#15473,#15474);+#15473 = CARTESIAN_POINT('',(1.,0.));+#15474 = VECTOR('',#15475,1.);+#15475 = DIRECTION('',(0.,-1.));+#15476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15477 = ORIENTED_EDGE('',*,*,#14810,.T.);+#15478 = ORIENTED_EDGE('',*,*,#15430,.F.);+#15479 = ADVANCED_FACE('',(#15480),#4037,.T.);+#15480 = FACE_BOUND('',#15481,.T.);+#15481 = EDGE_LOOP('',(#15482,#15483,#15504,#15505));+#15482 = ORIENTED_EDGE('',*,*,#4017,.T.);+#15483 = ORIENTED_EDGE('',*,*,#15484,.T.);+#15484 = EDGE_CURVE('',#3982,#14765,#15485,.T.);+#15485 = SURFACE_CURVE('',#15486,(#15490,#15497),.PCURVE_S1.);+#15486 = LINE('',#15487,#15488);+#15487 = CARTESIAN_POINT('',(-0.296622721354,-2.176106770833E-02,+ 1.6000001));+#15488 = VECTOR('',#15489,1.);+#15489 = DIRECTION('',(-0.,-0.,-1.));+#15490 = PCURVE('',#4037,#15491);+#15491 = DEFINITIONAL_REPRESENTATION('',(#15492),#15496);+#15492 = LINE('',#15493,#15494);+#15493 = CARTESIAN_POINT('',(0.,0.));+#15494 = VECTOR('',#15495,1.);+#15495 = DIRECTION('',(0.,-1.));+#15496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15497 = PCURVE('',#4001,#15498);+#15498 = DEFINITIONAL_REPRESENTATION('',(#15499),#15503);+#15499 = LINE('',#15500,#15501);+#15500 = CARTESIAN_POINT('',(1.,0.));+#15501 = VECTOR('',#15502,1.);+#15502 = DIRECTION('',(0.,-1.));+#15503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15504 = ORIENTED_EDGE('',*,*,#14787,.T.);+#15505 = ORIENTED_EDGE('',*,*,#15457,.F.);+#15506 = ADVANCED_FACE('',(#15507),#4001,.T.);+#15507 = FACE_BOUND('',#15508,.T.);+#15508 = EDGE_LOOP('',(#15509,#15510,#15531,#15532));+#15509 = ORIENTED_EDGE('',*,*,#3981,.T.);+#15510 = ORIENTED_EDGE('',*,*,#15511,.T.);+#15511 = EDGE_CURVE('',#3955,#14742,#15512,.T.);+#15512 = SURFACE_CURVE('',#15513,(#15517,#15524),.PCURVE_S1.);+#15513 = LINE('',#15514,#15515);+#15514 = CARTESIAN_POINT('',(-0.333878580729,-6.140950520833E-02,+ 1.6000001));+#15515 = VECTOR('',#15516,1.);+#15516 = DIRECTION('',(-0.,-0.,-1.));+#15517 = PCURVE('',#4001,#15518);+#15518 = DEFINITIONAL_REPRESENTATION('',(#15519),#15523);+#15519 = LINE('',#15520,#15521);+#15520 = CARTESIAN_POINT('',(0.,0.));+#15521 = VECTOR('',#15522,1.);+#15522 = DIRECTION('',(0.,-1.));+#15523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15524 = PCURVE('',#3970,#15525);+#15525 = DEFINITIONAL_REPRESENTATION('',(#15526),#15530);+#15526 = LINE('',#15527,#15528);+#15527 = CARTESIAN_POINT('',(1.936848958333E-02,0.));+#15528 = VECTOR('',#15529,1.);+#15529 = DIRECTION('',(0.,-1.));+#15530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15531 = ORIENTED_EDGE('',*,*,#14764,.T.);+#15532 = ORIENTED_EDGE('',*,*,#15484,.F.);+#15533 = ADVANCED_FACE('',(#15534),#3970,.T.);+#15534 = FACE_BOUND('',#15535,.T.);+#15535 = EDGE_LOOP('',(#15536,#15537,#15558,#15559));+#15536 = ORIENTED_EDGE('',*,*,#3954,.F.);+#15537 = ORIENTED_EDGE('',*,*,#15538,.T.);+#15538 = EDGE_CURVE('',#3928,#14719,#15539,.T.);+#15539 = SURFACE_CURVE('',#15540,(#15544,#15551),.PCURVE_S1.);+#15540 = LINE('',#15541,#15542);+#15541 = CARTESIAN_POINT('',(-0.333878580729,-8.077799479167E-02,+ 1.6000001));+#15542 = VECTOR('',#15543,1.);+#15543 = DIRECTION('',(-0.,-0.,-1.));+#15544 = PCURVE('',#3970,#15545);+#15545 = DEFINITIONAL_REPRESENTATION('',(#15546),#15550);+#15546 = LINE('',#15547,#15548);+#15547 = CARTESIAN_POINT('',(0.,0.));+#15548 = VECTOR('',#15549,1.);+#15549 = DIRECTION('',(0.,-1.));+#15550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15551 = PCURVE('',#3943,#15552);+#15552 = DEFINITIONAL_REPRESENTATION('',(#15553),#15557);+#15553 = LINE('',#15554,#15555);+#15554 = CARTESIAN_POINT('',(0.103336588542,0.));+#15555 = VECTOR('',#15556,1.);+#15556 = DIRECTION('',(0.,-1.));+#15557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15558 = ORIENTED_EDGE('',*,*,#14741,.T.);+#15559 = ORIENTED_EDGE('',*,*,#15511,.F.);+#15560 = ADVANCED_FACE('',(#15561),#3943,.T.);+#15561 = FACE_BOUND('',#15562,.T.);+#15562 = EDGE_LOOP('',(#15563,#15564,#15585,#15586));+#15563 = ORIENTED_EDGE('',*,*,#3927,.F.);+#15564 = ORIENTED_EDGE('',*,*,#15565,.T.);+#15565 = EDGE_CURVE('',#3901,#14696,#15566,.T.);+#15566 = SURFACE_CURVE('',#15567,(#15571,#15578),.PCURVE_S1.);+#15567 = LINE('',#15568,#15569);+#15568 = CARTESIAN_POINT('',(-0.230541992188,-8.077799479167E-02,+ 1.6000001));+#15569 = VECTOR('',#15570,1.);+#15570 = DIRECTION('',(-0.,-0.,-1.));+#15571 = PCURVE('',#3943,#15572);+#15572 = DEFINITIONAL_REPRESENTATION('',(#15573),#15577);+#15573 = LINE('',#15574,#15575);+#15574 = CARTESIAN_POINT('',(0.,0.));+#15575 = VECTOR('',#15576,1.);+#15576 = DIRECTION('',(0.,-1.));+#15577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15578 = PCURVE('',#3916,#15579);+#15579 = DEFINITIONAL_REPRESENTATION('',(#15580),#15584);+#15580 = LINE('',#15581,#15582);+#15581 = CARTESIAN_POINT('',(1.936848958333E-02,0.));+#15582 = VECTOR('',#15583,1.);+#15583 = DIRECTION('',(0.,-1.));+#15584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15585 = ORIENTED_EDGE('',*,*,#14718,.T.);+#15586 = ORIENTED_EDGE('',*,*,#15538,.F.);+#15587 = ADVANCED_FACE('',(#15588),#3916,.T.);+#15588 = FACE_BOUND('',#15589,.T.);+#15589 = EDGE_LOOP('',(#15590,#15591,#15612,#15613));+#15590 = ORIENTED_EDGE('',*,*,#3900,.F.);+#15591 = ORIENTED_EDGE('',*,*,#15592,.T.);+#15592 = EDGE_CURVE('',#3874,#14673,#15593,.T.);+#15593 = SURFACE_CURVE('',#15594,(#15598,#15605),.PCURVE_S1.);+#15594 = LINE('',#15595,#15596);+#15595 = CARTESIAN_POINT('',(-0.230541992188,-6.140950520833E-02,+ 1.6000001));+#15596 = VECTOR('',#15597,1.);+#15597 = DIRECTION('',(-0.,-0.,-1.));+#15598 = PCURVE('',#3916,#15599);+#15599 = DEFINITIONAL_REPRESENTATION('',(#15600),#15604);+#15600 = LINE('',#15601,#15602);+#15601 = CARTESIAN_POINT('',(0.,0.));+#15602 = VECTOR('',#15603,1.);+#15603 = DIRECTION('',(0.,-1.));+#15604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15605 = PCURVE('',#3889,#15606);+#15606 = DEFINITIONAL_REPRESENTATION('',(#15607),#15611);+#15607 = LINE('',#15608,#15609);+#15608 = CARTESIAN_POINT('',(7.815755208333E-02,0.));+#15609 = VECTOR('',#15610,1.);+#15610 = DIRECTION('',(0.,-1.));+#15611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15612 = ORIENTED_EDGE('',*,*,#14695,.T.);+#15613 = ORIENTED_EDGE('',*,*,#15565,.F.);+#15614 = ADVANCED_FACE('',(#15615),#3889,.T.);+#15615 = FACE_BOUND('',#15616,.T.);+#15616 = EDGE_LOOP('',(#15617,#15618,#15639,#15640));+#15617 = ORIENTED_EDGE('',*,*,#3873,.F.);+#15618 = ORIENTED_EDGE('',*,*,#15619,.T.);+#15619 = EDGE_CURVE('',#3836,#14671,#15620,.T.);+#15620 = SURFACE_CURVE('',#15621,(#15625,#15632),.PCURVE_S1.);+#15621 = LINE('',#15622,#15623);+#15622 = CARTESIAN_POINT('',(-0.308699544271,-6.140950520833E-02,+ 1.6000001));+#15623 = VECTOR('',#15624,1.);+#15624 = DIRECTION('',(-0.,-0.,-1.));+#15625 = PCURVE('',#3889,#15626);+#15626 = DEFINITIONAL_REPRESENTATION('',(#15627),#15631);+#15627 = LINE('',#15628,#15629);+#15628 = CARTESIAN_POINT('',(0.,0.));+#15629 = VECTOR('',#15630,1.);+#15630 = DIRECTION('',(0.,-1.));+#15631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15632 = PCURVE('',#3857,#15633);+#15633 = DEFINITIONAL_REPRESENTATION('',(#15634),#15638);+#15634 = LINE('',#15635,#15636);+#15635 = CARTESIAN_POINT('',(1.,0.));+#15636 = VECTOR('',#15637,1.);+#15637 = DIRECTION('',(0.,-1.));+#15638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15639 = ORIENTED_EDGE('',*,*,#14670,.T.);+#15640 = ORIENTED_EDGE('',*,*,#15592,.F.);+#15641 = ADVANCED_FACE('',(#15642),#3857,.T.);+#15642 = FACE_BOUND('',#15643,.T.);+#15643 = EDGE_LOOP('',(#15644,#15645,#15646,#15647));+#15644 = ORIENTED_EDGE('',*,*,#3835,.T.);+#15645 = ORIENTED_EDGE('',*,*,#14646,.T.);+#15646 = ORIENTED_EDGE('',*,*,#15108,.T.);+#15647 = ORIENTED_EDGE('',*,*,#15619,.F.);+#15648 = ADVANCED_FACE('',(#15649),#3817,.T.);+#15649 = FACE_BOUND('',#15650,.T.);+#15650 = EDGE_LOOP('',(#15651,#15652,#15675,#15703));+#15651 = ORIENTED_EDGE('',*,*,#3799,.T.);+#15652 = ORIENTED_EDGE('',*,*,#15653,.T.);+#15653 = EDGE_CURVE('',#3764,#15654,#15656,.T.);+#15654 = VERTEX_POINT('',#15655);+#15655 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,+ 1.5000001));+#15656 = SURFACE_CURVE('',#15657,(#15661,#15668),.PCURVE_S1.);+#15657 = LINE('',#15658,#15659);+#15658 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,+ 1.6000001));+#15659 = VECTOR('',#15660,1.);+#15660 = DIRECTION('',(-0.,-0.,-1.));+#15661 = PCURVE('',#3817,#15662);+#15662 = DEFINITIONAL_REPRESENTATION('',(#15663),#15667);+#15663 = LINE('',#15664,#15665);+#15664 = CARTESIAN_POINT('',(0.,0.));+#15665 = VECTOR('',#15666,1.);+#15666 = DIRECTION('',(0.,-1.));+#15667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15668 = PCURVE('',#3783,#15669);+#15669 = DEFINITIONAL_REPRESENTATION('',(#15670),#15674);+#15670 = LINE('',#15671,#15672);+#15671 = CARTESIAN_POINT('',(1.,0.));+#15672 = VECTOR('',#15673,1.);+#15673 = DIRECTION('',(0.,-1.));+#15674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15675 = ORIENTED_EDGE('',*,*,#15676,.T.);+#15676 = EDGE_CURVE('',#15654,#15677,#15679,.T.);+#15677 = VERTEX_POINT('',#15678);+#15678 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,+ 1.5000001));+#15679 = SURFACE_CURVE('',#15680,(#15684,#15691),.PCURVE_S1.);+#15680 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15681,#15682,#15683),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15681 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,+ 1.5000001));+#15682 = CARTESIAN_POINT('',(-0.409985351563,9.239908854167E-02,+ 1.5000001));+#15683 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,+ 1.5000001));+#15684 = PCURVE('',#3817,#15685);+#15685 = DEFINITIONAL_REPRESENTATION('',(#15686),#15690);+#15686 = LINE('',#15687,#15688);+#15687 = CARTESIAN_POINT('',(0.,-0.1));+#15688 = VECTOR('',#15689,1.);+#15689 = DIRECTION('',(1.,0.));+#15690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15691 = PCURVE('',#15692,#15697);+#15692 = PLANE('',#15693);+#15693 = AXIS2_PLACEMENT_3D('',#15694,#15695,#15696);+#15694 = CARTESIAN_POINT('',(-0.491674804688,-8.077799479167E-02,+ 1.5000001));+#15695 = DIRECTION('',(0.,0.,1.));+#15696 = DIRECTION('',(1.,0.,0.));+#15697 = DEFINITIONAL_REPRESENTATION('',(#15698),#15702);+#15698 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15699,#15700,#15701),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15699 = CARTESIAN_POINT('',(7.189127604167E-02,0.173177083333));+#15700 = CARTESIAN_POINT('',(8.1689453125E-02,0.173177083333));+#15701 = CARTESIAN_POINT('',(9.251302083333E-02,0.170955403646));+#15702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15703 = ORIENTED_EDGE('',*,*,#15704,.F.);+#15704 = EDGE_CURVE('',#2855,#15677,#15705,.T.);+#15705 = SURFACE_CURVE('',#15706,(#15710,#15717),.PCURVE_S1.);+#15706 = LINE('',#15707,#15708);+#15707 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,+ 1.6000001));+#15708 = VECTOR('',#15709,1.);+#15709 = DIRECTION('',(-0.,-0.,-1.));+#15710 = PCURVE('',#3817,#15711);+#15711 = DEFINITIONAL_REPRESENTATION('',(#15712),#15716);+#15712 = LINE('',#15713,#15714);+#15713 = CARTESIAN_POINT('',(1.,0.));+#15714 = VECTOR('',#15715,1.);+#15715 = DIRECTION('',(0.,-1.));+#15716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15717 = PCURVE('',#2874,#15718);+#15718 = DEFINITIONAL_REPRESENTATION('',(#15719),#15723);+#15719 = LINE('',#15720,#15721);+#15720 = CARTESIAN_POINT('',(0.,0.));+#15721 = VECTOR('',#15722,1.);+#15722 = DIRECTION('',(0.,-1.));+#15723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15724 = ADVANCED_FACE('',(#15725),#15692,.T.);+#15725 = FACE_BOUND('',#15726,.F.);+#15726 = EDGE_LOOP('',(#15727,#15752,#15775,#15798,#15821,#15844,#15867,+ #15890,#15913,#15936,#15959,#15982,#16005,#16028,#16051,#16074,+ #16097,#16120,#16143,#16166,#16189,#16212,#16235,#16258,#16281,+ #16304,#16325,#16326));+#15727 = ORIENTED_EDGE('',*,*,#15728,.T.);+#15728 = EDGE_CURVE('',#15729,#15731,#15733,.T.);+#15729 = VERTEX_POINT('',#15730);+#15730 = CARTESIAN_POINT('',(-0.376375325521,8.351236979167E-02,+ 1.5000001));+#15731 = VERTEX_POINT('',#15732);+#15732 = CARTESIAN_POINT('',(-0.376375325521,6.015625E-02,1.5000001));+#15733 = SURFACE_CURVE('',#15734,(#15738,#15745),.PCURVE_S1.);+#15734 = LINE('',#15735,#15736);+#15735 = CARTESIAN_POINT('',(-0.376375325521,8.351236979167E-02,+ 1.5000001));+#15736 = VECTOR('',#15737,1.);+#15737 = DIRECTION('',(0.,-1.,0.));+#15738 = PCURVE('',#15692,#15739);+#15739 = DEFINITIONAL_REPRESENTATION('',(#15740),#15744);+#15740 = LINE('',#15741,#15742);+#15741 = CARTESIAN_POINT('',(0.115299479167,0.164290364583));+#15742 = VECTOR('',#15743,1.);+#15743 = DIRECTION('',(0.,-1.));+#15744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15745 = PCURVE('',#2906,#15746);+#15746 = DEFINITIONAL_REPRESENTATION('',(#15747),#15751);+#15747 = LINE('',#15748,#15749);+#15748 = CARTESIAN_POINT('',(0.,-0.1));+#15749 = VECTOR('',#15750,1.);+#15750 = DIRECTION('',(1.,0.));+#15751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15752 = ORIENTED_EDGE('',*,*,#15753,.T.);+#15753 = EDGE_CURVE('',#15731,#15754,#15756,.T.);+#15754 = VERTEX_POINT('',#15755);+#15755 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,+ 1.5000001));+#15756 = SURFACE_CURVE('',#15757,(#15761,#15768),.PCURVE_S1.);+#15757 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15758,#15759,#15760),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15758 = CARTESIAN_POINT('',(-0.376375325521,6.015625E-02,1.5000001));+#15759 = CARTESIAN_POINT('',(-0.386857096354,6.687825520833E-02,+ 1.5000001));+#15760 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,+ 1.5000001));+#15761 = PCURVE('',#15692,#15762);+#15762 = DEFINITIONAL_REPRESENTATION('',(#15763),#15767);+#15763 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15764,#15765,#15766),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15764 = CARTESIAN_POINT('',(0.115299479167,0.140934244792));+#15765 = CARTESIAN_POINT('',(0.104817708333,0.14765625));+#15766 = CARTESIAN_POINT('',(9.427897135417E-02,0.15107421875));+#15767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15768 = PCURVE('',#2937,#15769);+#15769 = DEFINITIONAL_REPRESENTATION('',(#15770),#15774);+#15770 = LINE('',#15771,#15772);+#15771 = CARTESIAN_POINT('',(0.,-0.1));+#15772 = VECTOR('',#15773,1.);+#15773 = DIRECTION('',(1.,0.));+#15774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15775 = ORIENTED_EDGE('',*,*,#15776,.T.);+#15776 = EDGE_CURVE('',#15754,#15777,#15779,.T.);+#15777 = VERTEX_POINT('',#15778);+#15778 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,+ 1.5000001));+#15779 = SURFACE_CURVE('',#15780,(#15784,#15791),.PCURVE_S1.);+#15780 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15781,#15782,#15783),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15781 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,+ 1.5000001));+#15782 = CARTESIAN_POINT('',(-0.407934570313,7.371419270833E-02,+ 1.5000001));+#15783 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,+ 1.5000001));+#15784 = PCURVE('',#15692,#15785);+#15785 = DEFINITIONAL_REPRESENTATION('',(#15786),#15790);+#15786 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15787,#15788,#15789),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15787 = CARTESIAN_POINT('',(9.427897135417E-02,0.15107421875));+#15788 = CARTESIAN_POINT('',(8.3740234375E-02,0.1544921875));+#15789 = CARTESIAN_POINT('',(7.303059895833E-02,0.1544921875));+#15790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15791 = PCURVE('',#2973,#15792);+#15792 = DEFINITIONAL_REPRESENTATION('',(#15793),#15797);+#15793 = LINE('',#15794,#15795);+#15794 = CARTESIAN_POINT('',(0.,-0.1));+#15795 = VECTOR('',#15796,1.);+#15796 = DIRECTION('',(1.,0.));+#15797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15798 = ORIENTED_EDGE('',*,*,#15799,.T.);+#15799 = EDGE_CURVE('',#15777,#15800,#15802,.T.);+#15800 = VERTEX_POINT('',#15801);+#15801 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.5000001+ ));+#15802 = SURFACE_CURVE('',#15803,(#15807,#15814),.PCURVE_S1.);+#15803 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15804,#15805,#15806),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15804 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,+ 1.5000001));+#15805 = CARTESIAN_POINT('',(-0.434936523438,7.371419270833E-02,+ 1.5000001));+#15806 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.5000001+ ));+#15807 = PCURVE('',#15692,#15808);+#15808 = DEFINITIONAL_REPRESENTATION('',(#15809),#15813);+#15809 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15810,#15811,#15812),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15810 = CARTESIAN_POINT('',(7.303059895833E-02,0.1544921875));+#15811 = CARTESIAN_POINT('',(5.673828125E-02,0.1544921875));+#15812 = CARTESIAN_POINT('',(4.728190104167E-02,0.146915690104));+#15813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15814 = PCURVE('',#3009,#15815);+#15815 = DEFINITIONAL_REPRESENTATION('',(#15816),#15820);+#15816 = LINE('',#15817,#15818);+#15817 = CARTESIAN_POINT('',(0.,-0.1));+#15818 = VECTOR('',#15819,1.);+#15819 = DIRECTION('',(1.,0.));+#15820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15821 = ORIENTED_EDGE('',*,*,#15822,.T.);+#15822 = EDGE_CURVE('',#15800,#15823,#15825,.T.);+#15823 = VERTEX_POINT('',#15824);+#15824 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,+ 1.5000001));+#15825 = SURFACE_CURVE('',#15826,(#15830,#15837),.PCURVE_S1.);+#15826 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15827,#15828,#15829),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15827 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.5000001+ ));+#15828 = CARTESIAN_POINT('',(-0.453849283854,5.856119791667E-02,+ 1.5000001));+#15829 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,+ 1.5000001));+#15830 = PCURVE('',#15692,#15831);+#15831 = DEFINITIONAL_REPRESENTATION('',(#15832),#15836);+#15832 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15833,#15834,#15835),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15833 = CARTESIAN_POINT('',(4.728190104167E-02,0.146915690104));+#15834 = CARTESIAN_POINT('',(3.782552083333E-02,0.139339192708));+#15835 = CARTESIAN_POINT('',(3.782552083333E-02,0.12646484375));+#15836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15837 = PCURVE('',#3051,#15838);+#15838 = DEFINITIONAL_REPRESENTATION('',(#15839),#15843);+#15839 = LINE('',#15840,#15841);+#15840 = CARTESIAN_POINT('',(0.,-0.1));+#15841 = VECTOR('',#15842,1.);+#15842 = DIRECTION('',(1.,0.));+#15843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15844 = ORIENTED_EDGE('',*,*,#15845,.T.);+#15845 = EDGE_CURVE('',#15823,#15846,#15848,.T.);+#15846 = VERTEX_POINT('',#15847);+#15847 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,+ 1.5000001));+#15848 = SURFACE_CURVE('',#15849,(#15853,#15860),.PCURVE_S1.);+#15849 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15850,#15851,#15852),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15850 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,+ 1.5000001));+#15851 = CARTESIAN_POINT('',(-0.453849283854,3.440755208333E-02,+ 1.5000001));+#15852 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,+ 1.5000001));+#15853 = PCURVE('',#15692,#15854);+#15854 = DEFINITIONAL_REPRESENTATION('',(#15855),#15859);+#15855 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15856,#15857,#15858),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15856 = CARTESIAN_POINT('',(3.782552083333E-02,0.12646484375));+#15857 = CARTESIAN_POINT('',(3.782552083333E-02,0.115185546875));+#15858 = CARTESIAN_POINT('',(4.403483072917E-02,0.109261067708));+#15859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15860 = PCURVE('',#3090,#15861);+#15861 = DEFINITIONAL_REPRESENTATION('',(#15862),#15866);+#15862 = LINE('',#15863,#15864);+#15863 = CARTESIAN_POINT('',(0.,-0.1));+#15864 = VECTOR('',#15865,1.);+#15865 = DIRECTION('',(1.,0.));+#15866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15867 = ORIENTED_EDGE('',*,*,#15868,.T.);+#15868 = EDGE_CURVE('',#15846,#15869,#15871,.T.);+#15869 = VERTEX_POINT('',#15870);+#15870 = CARTESIAN_POINT('',(-0.424454752604,1.857096354167E-02,+ 1.5000001));+#15871 = SURFACE_CURVE('',#15872,(#15876,#15883),.PCURVE_S1.);+#15872 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15873,#15874,#15875),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15873 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,+ 1.5000001));+#15874 = CARTESIAN_POINT('',(-0.441430664063,2.255859375E-02,1.5000001)+ );+#15875 = CARTESIAN_POINT('',(-0.424454752604,1.857096354167E-02,+ 1.5000001));+#15876 = PCURVE('',#15692,#15877);+#15877 = DEFINITIONAL_REPRESENTATION('',(#15878),#15882);+#15878 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15879,#15880,#15881),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15879 = CARTESIAN_POINT('',(4.403483072917E-02,0.109261067708));+#15880 = CARTESIAN_POINT('',(5.0244140625E-02,0.103336588542));+#15881 = CARTESIAN_POINT('',(6.722005208333E-02,9.934895833333E-02));+#15882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15883 = PCURVE('',#3126,#15884);+#15884 = DEFINITIONAL_REPRESENTATION('',(#15885),#15889);+#15885 = LINE('',#15886,#15887);+#15886 = CARTESIAN_POINT('',(0.,-0.1));+#15887 = VECTOR('',#15888,1.);+#15888 = DIRECTION('',(1.,0.));+#15889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15890 = ORIENTED_EDGE('',*,*,#15891,.T.);+#15891 = EDGE_CURVE('',#15869,#15892,#15894,.T.);+#15892 = VERTEX_POINT('',#15893);+#15893 = CARTESIAN_POINT('',(-0.412377929688,1.583658854167E-02,+ 1.5000001));+#15894 = SURFACE_CURVE('',#15895,(#15899,#15906),.PCURVE_S1.);+#15895 = LINE('',#15896,#15897);+#15896 = CARTESIAN_POINT('',(-0.424454752604,1.857096354167E-02,+ 1.5000001));+#15897 = VECTOR('',#15898,1.);+#15898 = DIRECTION('',(0.975313298974,-0.220825652598,0.));+#15899 = PCURVE('',#15692,#15900);+#15900 = DEFINITIONAL_REPRESENTATION('',(#15901),#15905);+#15901 = LINE('',#15902,#15903);+#15902 = CARTESIAN_POINT('',(6.722005208333E-02,9.934895833333E-02));+#15903 = VECTOR('',#15904,1.);+#15904 = DIRECTION('',(0.975313298974,-0.220825652598));+#15905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15906 = PCURVE('',#3158,#15907);+#15907 = DEFINITIONAL_REPRESENTATION('',(#15908),#15912);+#15908 = LINE('',#15909,#15910);+#15909 = CARTESIAN_POINT('',(0.,-0.1));+#15910 = VECTOR('',#15911,1.);+#15911 = DIRECTION('',(1.,0.));+#15912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15913 = ORIENTED_EDGE('',*,*,#15914,.T.);+#15914 = EDGE_CURVE('',#15892,#15915,#15917,.T.);+#15915 = VERTEX_POINT('',#15916);+#15916 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.5000001)+ );+#15917 = SURFACE_CURVE('',#15918,(#15922,#15929),.PCURVE_S1.);+#15918 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15919,#15920,#15921),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15919 = CARTESIAN_POINT('',(-0.412377929688,1.583658854167E-02,+ 1.5000001));+#15920 = CARTESIAN_POINT('',(-0.388452148438,1.025390625E-02,1.5000001)+ );+#15921 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.5000001)+ );+#15922 = PCURVE('',#15692,#15923);+#15923 = DEFINITIONAL_REPRESENTATION('',(#15924),#15928);+#15924 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15925,#15926,#15927),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15925 = CARTESIAN_POINT('',(7.9296875E-02,9.661458333333E-02));+#15926 = CARTESIAN_POINT('',(0.10322265625,9.103190104167E-02));+#15927 = CARTESIAN_POINT('',(0.11416015625,7.906901041667E-02));+#15928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15929 = PCURVE('',#3189,#15930);+#15930 = DEFINITIONAL_REPRESENTATION('',(#15931),#15935);+#15931 = LINE('',#15932,#15933);+#15932 = CARTESIAN_POINT('',(0.,-0.1));+#15933 = VECTOR('',#15934,1.);+#15934 = DIRECTION('',(1.,0.));+#15935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15936 = ORIENTED_EDGE('',*,*,#15937,.T.);+#15937 = EDGE_CURVE('',#15915,#15938,#15940,.T.);+#15938 = VERTEX_POINT('',#15939);+#15939 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,+ 1.5000001));+#15940 = SURFACE_CURVE('',#15941,(#15945,#15952),.PCURVE_S1.);+#15941 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15942,#15943,#15944),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15942 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.5000001)+ );+#15943 = CARTESIAN_POINT('',(-0.366577148438,-1.3671875E-02,1.5000001));+#15944 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,+ 1.5000001));+#15945 = PCURVE('',#15692,#15946);+#15946 = DEFINITIONAL_REPRESENTATION('',(#15947),#15951);+#15947 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15948,#15949,#15950),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15948 = CARTESIAN_POINT('',(0.11416015625,7.906901041667E-02));+#15949 = CARTESIAN_POINT('',(0.12509765625,6.710611979167E-02));+#15950 = CARTESIAN_POINT('',(0.12509765625,4.6484375E-02));+#15951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15952 = PCURVE('',#3225,#15953);+#15953 = DEFINITIONAL_REPRESENTATION('',(#15954),#15958);+#15954 = LINE('',#15955,#15956);+#15955 = CARTESIAN_POINT('',(0.,-0.1));+#15956 = VECTOR('',#15957,1.);+#15957 = DIRECTION('',(1.,0.));+#15958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15959 = ORIENTED_EDGE('',*,*,#15960,.T.);+#15960 = EDGE_CURVE('',#15938,#15961,#15963,.T.);+#15961 = VERTEX_POINT('',#15962);+#15962 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,+ 1.5000001));+#15963 = SURFACE_CURVE('',#15964,(#15968,#15975),.PCURVE_S1.);+#15964 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15965,#15966,#15967),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15965 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,+ 1.5000001));+#15966 = CARTESIAN_POINT('',(-0.366577148438,-5.856119791667E-02,+ 1.5000001));+#15967 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,+ 1.5000001));+#15968 = PCURVE('',#15692,#15969);+#15969 = DEFINITIONAL_REPRESENTATION('',(#15970),#15974);+#15970 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15971,#15972,#15973),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15971 = CARTESIAN_POINT('',(0.12509765625,4.6484375E-02));+#15972 = CARTESIAN_POINT('',(0.12509765625,2.2216796875E-02));+#15973 = CARTESIAN_POINT('',(0.11005859375,9.456380208333E-03));+#15974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15975 = PCURVE('',#3261,#15976);+#15976 = DEFINITIONAL_REPRESENTATION('',(#15977),#15981);+#15977 = LINE('',#15978,#15979);+#15978 = CARTESIAN_POINT('',(0.,-0.1));+#15979 = VECTOR('',#15980,1.);+#15980 = DIRECTION('',(1.,0.));+#15981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15982 = ORIENTED_EDGE('',*,*,#15983,.T.);+#15983 = EDGE_CURVE('',#15961,#15984,#15986,.T.);+#15984 = VERTEX_POINT('',#15985);+#15985 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.5000001)+ );+#15986 = SURFACE_CURVE('',#15987,(#15991,#15998),.PCURVE_S1.);+#15987 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15988,#15989,#15990),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15988 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,+ 1.5000001));+#15989 = CARTESIAN_POINT('',(-0.396655273438,-8.408203125E-02,1.5000001)+ );+#15990 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.5000001)+ );+#15991 = PCURVE('',#15692,#15992);+#15992 = DEFINITIONAL_REPRESENTATION('',(#15993),#15997);+#15993 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#15994,#15995,#15996),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#15994 = CARTESIAN_POINT('',(0.11005859375,9.456380208333E-03));+#15995 = CARTESIAN_POINT('',(9.501953125E-02,-3.304036458333E-03));+#15996 = CARTESIAN_POINT('',(6.630859375E-02,-3.304036458333E-03));+#15997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#15998 = PCURVE('',#3297,#15999);+#15999 = DEFINITIONAL_REPRESENTATION('',(#16000),#16004);+#16000 = LINE('',#16001,#16002);+#16001 = CARTESIAN_POINT('',(0.,-0.1));+#16002 = VECTOR('',#16003,1.);+#16003 = DIRECTION('',(1.,0.));+#16004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16005 = ORIENTED_EDGE('',*,*,#16006,.T.);+#16006 = EDGE_CURVE('',#15984,#16007,#16009,.T.);+#16007 = VERTEX_POINT('',#16008);+#16008 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,+ 1.5000001));+#16009 = SURFACE_CURVE('',#16010,(#16014,#16021),.PCURVE_S1.);+#16010 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16011,#16012,#16013),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16011 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.5000001)+ );+#16012 = CARTESIAN_POINT('',(-0.437329101563,-8.408203125E-02,1.5000001)+ );+#16013 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,+ 1.5000001));+#16014 = PCURVE('',#15692,#16015);+#16015 = DEFINITIONAL_REPRESENTATION('',(#16016),#16020);+#16016 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16017,#16018,#16019),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16017 = CARTESIAN_POINT('',(6.630859375E-02,-3.304036458333E-03));+#16018 = CARTESIAN_POINT('',(5.4345703125E-02,-3.304036458333E-03));+#16019 = CARTESIAN_POINT('',(4.226888020833E-02,-7.405598958333E-04));+#16020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16021 = PCURVE('',#3333,#16022);+#16022 = DEFINITIONAL_REPRESENTATION('',(#16023),#16027);+#16023 = LINE('',#16024,#16025);+#16024 = CARTESIAN_POINT('',(0.,-0.1));+#16025 = VECTOR('',#16026,1.);+#16026 = DIRECTION('',(1.,0.));+#16027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16028 = ORIENTED_EDGE('',*,*,#16029,.T.);+#16029 = EDGE_CURVE('',#16007,#16030,#16032,.T.);+#16030 = VERTEX_POINT('',#16031);+#16031 = CARTESIAN_POINT('',(-0.473673502604,-7.3828125E-02,1.5000001));+#16032 = SURFACE_CURVE('',#16033,(#16037,#16044),.PCURVE_S1.);+#16033 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16034,#16035,#16036),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16034 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,+ 1.5000001));+#16035 = CARTESIAN_POINT('',(-0.461482747396,-7.8955078125E-02,1.5000001+ ));+#16036 = CARTESIAN_POINT('',(-0.473673502604,-7.3828125E-02,1.5000001));+#16037 = PCURVE('',#15692,#16038);+#16038 = DEFINITIONAL_REPRESENTATION('',(#16039),#16043);+#16039 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16040,#16041,#16042),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16040 = CARTESIAN_POINT('',(4.226888020833E-02,-7.405598958333E-04));+#16041 = CARTESIAN_POINT('',(3.019205729167E-02,1.822916666667E-03));+#16042 = CARTESIAN_POINT('',(1.800130208333E-02,6.949869791667E-03));+#16043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16044 = PCURVE('',#3369,#16045);+#16045 = DEFINITIONAL_REPRESENTATION('',(#16046),#16050);+#16046 = LINE('',#16047,#16048);+#16047 = CARTESIAN_POINT('',(0.,-0.1));+#16048 = VECTOR('',#16049,1.);+#16049 = DIRECTION('',(1.,0.));+#16050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16051 = ORIENTED_EDGE('',*,*,#16052,.T.);+#16052 = EDGE_CURVE('',#16030,#16053,#16055,.T.);+#16053 = VERTEX_POINT('',#16054);+#16054 = CARTESIAN_POINT('',(-0.473673502604,-4.933268229167E-02,+ 1.5000001));+#16055 = SURFACE_CURVE('',#16056,(#16060,#16067),.PCURVE_S1.);+#16056 = LINE('',#16057,#16058);+#16057 = CARTESIAN_POINT('',(-0.473673502604,-7.3828125E-02,1.5000001));+#16058 = VECTOR('',#16059,1.);+#16059 = DIRECTION('',(0.,1.,0.));+#16060 = PCURVE('',#15692,#16061);+#16061 = DEFINITIONAL_REPRESENTATION('',(#16062),#16066);+#16062 = LINE('',#16063,#16064);+#16063 = CARTESIAN_POINT('',(1.800130208333E-02,6.949869791667E-03));+#16064 = VECTOR('',#16065,1.);+#16065 = DIRECTION('',(0.,1.));+#16066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16067 = PCURVE('',#3401,#16068);+#16068 = DEFINITIONAL_REPRESENTATION('',(#16069),#16073);+#16069 = LINE('',#16070,#16071);+#16070 = CARTESIAN_POINT('',(0.,-0.1));+#16071 = VECTOR('',#16072,1.);+#16072 = DIRECTION('',(1.,0.));+#16073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16074 = ORIENTED_EDGE('',*,*,#16075,.T.);+#16075 = EDGE_CURVE('',#16053,#16076,#16078,.T.);+#16076 = VERTEX_POINT('',#16077);+#16077 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.5000001)+ );+#16078 = SURFACE_CURVE('',#16079,(#16083,#16090),.PCURVE_S1.);+#16079 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16080,#16081,#16082),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16080 = CARTESIAN_POINT('',(-0.473673502604,-4.933268229167E-02,+ 1.5000001));+#16081 = CARTESIAN_POINT('',(-0.460571289062,-5.764973958333E-02,+ 1.5000001));+#16082 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.5000001)+ );+#16083 = PCURVE('',#15692,#16084);+#16084 = DEFINITIONAL_REPRESENTATION('',(#16085),#16089);+#16085 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16086,#16087,#16088),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16086 = CARTESIAN_POINT('',(1.800130208333E-02,3.14453125E-02));+#16087 = CARTESIAN_POINT('',(3.1103515625E-02,2.312825520833E-02));+#16088 = CARTESIAN_POINT('',(4.278157552083E-02,1.925455729167E-02));+#16089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16090 = PCURVE('',#3432,#16091);+#16091 = DEFINITIONAL_REPRESENTATION('',(#16092),#16096);+#16092 = LINE('',#16093,#16094);+#16093 = CARTESIAN_POINT('',(0.,-0.1));+#16094 = VECTOR('',#16095,1.);+#16095 = DIRECTION('',(1.,0.));+#16096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16097 = ORIENTED_EDGE('',*,*,#16098,.T.);+#16098 = EDGE_CURVE('',#16076,#16099,#16101,.T.);+#16099 = VERTEX_POINT('',#16100);+#16100 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,+ 1.5000001));+#16101 = SURFACE_CURVE('',#16102,(#16106,#16113),.PCURVE_S1.);+#16102 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16103,#16104,#16105),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16103 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.5000001)+ );+#16104 = CARTESIAN_POINT('',(-0.437215169271,-6.539713541667E-02,+ 1.5000001));+#16105 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,+ 1.5000001));+#16106 = PCURVE('',#15692,#16107);+#16107 = DEFINITIONAL_REPRESENTATION('',(#16108),#16112);+#16108 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16109,#16110,#16111),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16109 = CARTESIAN_POINT('',(4.278157552083E-02,1.925455729167E-02));+#16110 = CARTESIAN_POINT('',(5.445963541667E-02,1.5380859375E-02));+#16111 = CARTESIAN_POINT('',(6.630859375E-02,1.5380859375E-02));+#16112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16113 = PCURVE('',#3468,#16114);+#16114 = DEFINITIONAL_REPRESENTATION('',(#16115),#16119);+#16115 = LINE('',#16116,#16117);+#16116 = CARTESIAN_POINT('',(0.,-0.1));+#16117 = VECTOR('',#16118,1.);+#16118 = DIRECTION('',(1.,0.));+#16119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16120 = ORIENTED_EDGE('',*,*,#16121,.T.);+#16121 = EDGE_CURVE('',#16099,#16122,#16124,.T.);+#16122 = VERTEX_POINT('',#16123);+#16123 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,+ 1.5000001));+#16124 = SURFACE_CURVE('',#16125,(#16129,#16136),.PCURVE_S1.);+#16125 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16126,#16127,#16128),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16126 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,+ 1.5000001));+#16127 = CARTESIAN_POINT('',(-0.407934570313,-6.539713541667E-02,+ 1.5000001));+#16128 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,+ 1.5000001));+#16129 = PCURVE('',#15692,#16130);+#16130 = DEFINITIONAL_REPRESENTATION('',(#16131),#16135);+#16131 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16132,#16133,#16134),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16132 = CARTESIAN_POINT('',(6.630859375E-02,1.5380859375E-02));+#16133 = CARTESIAN_POINT('',(8.3740234375E-02,1.5380859375E-02));+#16134 = CARTESIAN_POINT('',(9.342447916667E-02,2.318522135417E-02));+#16135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16136 = PCURVE('',#3504,#16137);+#16137 = DEFINITIONAL_REPRESENTATION('',(#16138),#16142);+#16138 = LINE('',#16139,#16140);+#16139 = CARTESIAN_POINT('',(0.,-0.1));+#16140 = VECTOR('',#16141,1.);+#16141 = DIRECTION('',(1.,0.));+#16142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16143 = ORIENTED_EDGE('',*,*,#16144,.T.);+#16144 = EDGE_CURVE('',#16122,#16145,#16147,.T.);+#16145 = VERTEX_POINT('',#16146);+#16146 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,+ 1.5000001));+#16147 = SURFACE_CURVE('',#16148,(#16152,#16159),.PCURVE_S1.);+#16148 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16149,#16150,#16151),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16149 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,+ 1.5000001));+#16150 = CARTESIAN_POINT('',(-0.388566080729,-4.978841145833E-02,+ 1.5000001));+#16151 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,+ 1.5000001));+#16152 = PCURVE('',#15692,#16153);+#16153 = DEFINITIONAL_REPRESENTATION('',(#16154),#16158);+#16154 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16155,#16156,#16157),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16155 = CARTESIAN_POINT('',(9.342447916667E-02,2.318522135417E-02));+#16156 = CARTESIAN_POINT('',(0.103108723958,3.098958333333E-02));+#16157 = CARTESIAN_POINT('',(0.103108723958,4.500325520833E-02));+#16158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16159 = PCURVE('',#3540,#16160);+#16160 = DEFINITIONAL_REPRESENTATION('',(#16161),#16165);+#16161 = LINE('',#16162,#16163);+#16162 = CARTESIAN_POINT('',(0.,-0.1));+#16163 = VECTOR('',#16164,1.);+#16164 = DIRECTION('',(1.,0.));+#16165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16166 = ORIENTED_EDGE('',*,*,#16167,.T.);+#16167 = EDGE_CURVE('',#16145,#16168,#16170,.T.);+#16168 = VERTEX_POINT('',#16169);+#16169 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,+ 1.5000001));+#16170 = SURFACE_CURVE('',#16171,(#16175,#16182),.PCURVE_S1.);+#16171 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16172,#16173,#16174),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16172 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,+ 1.5000001));+#16173 = CARTESIAN_POINT('',(-0.388566080729,-2.301432291667E-02,+ 1.5000001));+#16174 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,+ 1.5000001));+#16175 = PCURVE('',#15692,#16176);+#16176 = DEFINITIONAL_REPRESENTATION('',(#16177),#16181);+#16177 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16178,#16179,#16180),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16178 = CARTESIAN_POINT('',(0.103108723958,4.500325520833E-02));+#16179 = CARTESIAN_POINT('',(0.103108723958,5.7763671875E-02));+#16180 = CARTESIAN_POINT('',(9.644368489583E-02,6.448567708333E-02));+#16181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16182 = PCURVE('',#3576,#16183);+#16183 = DEFINITIONAL_REPRESENTATION('',(#16184),#16188);+#16184 = LINE('',#16185,#16186);+#16185 = CARTESIAN_POINT('',(0.,-0.1));+#16186 = VECTOR('',#16187,1.);+#16187 = DIRECTION('',(1.,0.));+#16188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16189 = ORIENTED_EDGE('',*,*,#16190,.T.);+#16190 = EDGE_CURVE('',#16168,#16191,#16193,.T.);+#16191 = VERTEX_POINT('',#16192);+#16192 = CARTESIAN_POINT('',(-0.418416341146,-5.924479166667E-03,+ 1.5000001));+#16193 = SURFACE_CURVE('',#16194,(#16198,#16205),.PCURVE_S1.);+#16194 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16195,#16196,#16197),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16195 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,+ 1.5000001));+#16196 = CARTESIAN_POINT('',(-0.401896158854,-9.5703125E-03,1.5000001));+#16197 = CARTESIAN_POINT('',(-0.418416341146,-5.924479166667E-03,+ 1.5000001));+#16198 = PCURVE('',#15692,#16199);+#16199 = DEFINITIONAL_REPRESENTATION('',(#16200),#16204);+#16200 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16201,#16202,#16203),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16201 = CARTESIAN_POINT('',(9.644368489583E-02,6.448567708333E-02));+#16202 = CARTESIAN_POINT('',(8.977864583333E-02,7.120768229167E-02));+#16203 = CARTESIAN_POINT('',(7.325846354167E-02,7.4853515625E-02));+#16204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16205 = PCURVE('',#3612,#16206);+#16206 = DEFINITIONAL_REPRESENTATION('',(#16207),#16211);+#16207 = LINE('',#16208,#16209);+#16208 = CARTESIAN_POINT('',(0.,-0.1));+#16209 = VECTOR('',#16210,1.);+#16210 = DIRECTION('',(1.,0.));+#16211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16212 = ORIENTED_EDGE('',*,*,#16213,.T.);+#16213 = EDGE_CURVE('',#16191,#16214,#16216,.T.);+#16214 = VERTEX_POINT('',#16215);+#16215 = CARTESIAN_POINT('',(-0.430721028646,-3.076171875E-03,1.5000001)+ );+#16216 = SURFACE_CURVE('',#16217,(#16221,#16228),.PCURVE_S1.);+#16217 = LINE('',#16218,#16219);+#16218 = CARTESIAN_POINT('',(-0.418416341146,-5.924479166667E-03,+ 1.5000001));+#16219 = VECTOR('',#16220,1.);+#16220 = DIRECTION('',(-0.97423893818,0.225518272727,0.));+#16221 = PCURVE('',#15692,#16222);+#16222 = DEFINITIONAL_REPRESENTATION('',(#16223),#16227);+#16223 = LINE('',#16224,#16225);+#16224 = CARTESIAN_POINT('',(7.325846354167E-02,7.4853515625E-02));+#16225 = VECTOR('',#16226,1.);+#16226 = DIRECTION('',(-0.97423893818,0.225518272727));+#16227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16228 = PCURVE('',#3644,#16229);+#16229 = DEFINITIONAL_REPRESENTATION('',(#16230),#16234);+#16230 = LINE('',#16231,#16232);+#16231 = CARTESIAN_POINT('',(0.,-0.1));+#16232 = VECTOR('',#16233,1.);+#16233 = DIRECTION('',(1.,0.));+#16234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16235 = ORIENTED_EDGE('',*,*,#16236,.T.);+#16236 = EDGE_CURVE('',#16214,#16237,#16239,.T.);+#16237 = VERTEX_POINT('',#16238);+#16238 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,+ 1.5000001));+#16239 = SURFACE_CURVE('',#16240,(#16244,#16251),.PCURVE_S1.);+#16240 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16241,#16242,#16243),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16241 = CARTESIAN_POINT('',(-0.430721028646,-3.076171875E-03,1.5000001)+ );+#16242 = CARTESIAN_POINT('',(-0.454418945313,2.278645833333E-03,+ 1.5000001));+#16243 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,+ 1.5000001));+#16244 = PCURVE('',#15692,#16245);+#16245 = DEFINITIONAL_REPRESENTATION('',(#16246),#16250);+#16246 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16247,#16248,#16249),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16247 = CARTESIAN_POINT('',(6.095377604167E-02,7.770182291667E-02));+#16248 = CARTESIAN_POINT('',(3.7255859375E-02,8.3056640625E-02));+#16249 = CARTESIAN_POINT('',(2.654622395833E-02,9.388020833333E-02));+#16250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16251 = PCURVE('',#3675,#16252);+#16252 = DEFINITIONAL_REPRESENTATION('',(#16253),#16257);+#16253 = LINE('',#16254,#16255);+#16254 = CARTESIAN_POINT('',(0.,-0.1));+#16255 = VECTOR('',#16256,1.);+#16256 = DIRECTION('',(1.,0.));+#16257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16258 = ORIENTED_EDGE('',*,*,#16259,.T.);+#16259 = EDGE_CURVE('',#16237,#16260,#16262,.T.);+#16260 = VERTEX_POINT('',#16261);+#16261 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,+ 1.5000001));+#16262 = SURFACE_CURVE('',#16263,(#16267,#16274),.PCURVE_S1.);+#16263 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16264,#16265,#16266),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16264 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,+ 1.5000001));+#16265 = CARTESIAN_POINT('',(-0.475838216146,2.392578125E-02,1.5000001)+ );+#16266 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,+ 1.5000001));+#16267 = PCURVE('',#15692,#16268);+#16268 = DEFINITIONAL_REPRESENTATION('',(#16269),#16273);+#16269 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16270,#16271,#16272),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16270 = CARTESIAN_POINT('',(2.654622395833E-02,9.388020833333E-02));+#16271 = CARTESIAN_POINT('',(1.583658854167E-02,0.104703776042));+#16272 = CARTESIAN_POINT('',(1.583658854167E-02,0.122932942708));+#16273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16274 = PCURVE('',#3711,#16275);+#16275 = DEFINITIONAL_REPRESENTATION('',(#16276),#16280);+#16276 = LINE('',#16277,#16278);+#16277 = CARTESIAN_POINT('',(0.,-0.1));+#16278 = VECTOR('',#16279,1.);+#16279 = DIRECTION('',(1.,0.));+#16280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16281 = ORIENTED_EDGE('',*,*,#16282,.T.);+#16282 = EDGE_CURVE('',#16260,#16283,#16285,.T.);+#16283 = VERTEX_POINT('',#16284);+#16284 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,+ 1.5000001));+#16285 = SURFACE_CURVE('',#16286,(#16290,#16297),.PCURVE_S1.);+#16286 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16287,#16288,#16289),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16287 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,+ 1.5000001));+#16288 = CARTESIAN_POINT('',(-0.475838216146,6.494140625E-02,1.5000001)+ );+#16289 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,+ 1.5000001));+#16290 = PCURVE('',#15692,#16291);+#16291 = DEFINITIONAL_REPRESENTATION('',(#16292),#16296);+#16292 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16293,#16294,#16295),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16293 = CARTESIAN_POINT('',(1.583658854167E-02,0.122932942708));+#16294 = CARTESIAN_POINT('',(1.583658854167E-02,0.145719401042));+#16295 = CARTESIAN_POINT('',(3.116048177083E-02,0.159448242188));+#16296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16297 = PCURVE('',#3747,#16298);+#16298 = DEFINITIONAL_REPRESENTATION('',(#16299),#16303);+#16299 = LINE('',#16300,#16301);+#16300 = CARTESIAN_POINT('',(0.,-0.1));+#16301 = VECTOR('',#16302,1.);+#16302 = DIRECTION('',(1.,0.));+#16303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16304 = ORIENTED_EDGE('',*,*,#16305,.T.);+#16305 = EDGE_CURVE('',#16283,#15654,#16306,.T.);+#16306 = SURFACE_CURVE('',#16307,(#16311,#16318),.PCURVE_S1.);+#16307 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16308,#16309,#16310),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16308 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,+ 1.5000001));+#16309 = CARTESIAN_POINT('',(-0.445190429688,9.239908854167E-02,+ 1.5000001));+#16310 = CARTESIAN_POINT('',(-0.419783528646,9.239908854167E-02,+ 1.5000001));+#16311 = PCURVE('',#15692,#16312);+#16312 = DEFINITIONAL_REPRESENTATION('',(#16313),#16317);+#16313 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16314,#16315,#16316),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16314 = CARTESIAN_POINT('',(3.116048177083E-02,0.159448242188));+#16315 = CARTESIAN_POINT('',(4.6484375E-02,0.173177083333));+#16316 = CARTESIAN_POINT('',(7.189127604167E-02,0.173177083333));+#16317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16318 = PCURVE('',#3783,#16319);+#16319 = DEFINITIONAL_REPRESENTATION('',(#16320),#16324);+#16320 = LINE('',#16321,#16322);+#16321 = CARTESIAN_POINT('',(0.,-0.1));+#16322 = VECTOR('',#16323,1.);+#16323 = DIRECTION('',(1.,0.));+#16324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16325 = ORIENTED_EDGE('',*,*,#15676,.T.);+#16326 = ORIENTED_EDGE('',*,*,#16327,.T.);+#16327 = EDGE_CURVE('',#15677,#15729,#16328,.T.);+#16328 = SURFACE_CURVE('',#16329,(#16333,#16340),.PCURVE_S1.);+#16329 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16330,#16331,#16332),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16330 = CARTESIAN_POINT('',(-0.399161783854,9.017740885417E-02,+ 1.5000001));+#16331 = CARTESIAN_POINT('',(-0.388338216146,8.795572916667E-02,+ 1.5000001));+#16332 = CARTESIAN_POINT('',(-0.376375325521,8.351236979167E-02,+ 1.5000001));+#16333 = PCURVE('',#15692,#16334);+#16334 = DEFINITIONAL_REPRESENTATION('',(#16335),#16339);+#16335 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#16336,#16337,#16338),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#16336 = CARTESIAN_POINT('',(9.251302083333E-02,0.170955403646));+#16337 = CARTESIAN_POINT('',(0.103336588542,0.168733723958));+#16338 = CARTESIAN_POINT('',(0.115299479167,0.164290364583));+#16339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16340 = PCURVE('',#2874,#16341);+#16341 = DEFINITIONAL_REPRESENTATION('',(#16342),#16346);+#16342 = LINE('',#16343,#16344);+#16343 = CARTESIAN_POINT('',(0.,-0.1));+#16344 = VECTOR('',#16345,1.);+#16345 = DIRECTION('',(1.,0.));+#16346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16347 = ADVANCED_FACE('',(#16348),#3783,.T.);+#16348 = FACE_BOUND('',#16349,.T.);+#16349 = EDGE_LOOP('',(#16350,#16351,#16372,#16373));+#16350 = ORIENTED_EDGE('',*,*,#3763,.T.);+#16351 = ORIENTED_EDGE('',*,*,#16352,.T.);+#16352 = EDGE_CURVE('',#3728,#16283,#16353,.T.);+#16353 = SURFACE_CURVE('',#16354,(#16358,#16365),.PCURVE_S1.);+#16354 = LINE('',#16355,#16356);+#16355 = CARTESIAN_POINT('',(-0.460514322917,7.867024739583E-02,+ 1.6000001));+#16356 = VECTOR('',#16357,1.);+#16357 = DIRECTION('',(-0.,-0.,-1.));+#16358 = PCURVE('',#3783,#16359);+#16359 = DEFINITIONAL_REPRESENTATION('',(#16360),#16364);+#16360 = LINE('',#16361,#16362);+#16361 = CARTESIAN_POINT('',(0.,0.));+#16362 = VECTOR('',#16363,1.);+#16363 = DIRECTION('',(0.,-1.));+#16364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16365 = PCURVE('',#3747,#16366);+#16366 = DEFINITIONAL_REPRESENTATION('',(#16367),#16371);+#16367 = LINE('',#16368,#16369);+#16368 = CARTESIAN_POINT('',(1.,0.));+#16369 = VECTOR('',#16370,1.);+#16370 = DIRECTION('',(0.,-1.));+#16371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16372 = ORIENTED_EDGE('',*,*,#16305,.T.);+#16373 = ORIENTED_EDGE('',*,*,#15653,.F.);+#16374 = ADVANCED_FACE('',(#16375),#3747,.T.);+#16375 = FACE_BOUND('',#16376,.T.);+#16376 = EDGE_LOOP('',(#16377,#16378,#16399,#16400));+#16377 = ORIENTED_EDGE('',*,*,#3727,.T.);+#16378 = ORIENTED_EDGE('',*,*,#16379,.T.);+#16379 = EDGE_CURVE('',#3692,#16260,#16380,.T.);+#16380 = SURFACE_CURVE('',#16381,(#16385,#16392),.PCURVE_S1.);+#16381 = LINE('',#16382,#16383);+#16382 = CARTESIAN_POINT('',(-0.475838216146,4.215494791667E-02,+ 1.6000001));+#16383 = VECTOR('',#16384,1.);+#16384 = DIRECTION('',(-0.,-0.,-1.));+#16385 = PCURVE('',#3747,#16386);+#16386 = DEFINITIONAL_REPRESENTATION('',(#16387),#16391);+#16387 = LINE('',#16388,#16389);+#16388 = CARTESIAN_POINT('',(0.,0.));+#16389 = VECTOR('',#16390,1.);+#16390 = DIRECTION('',(0.,-1.));+#16391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16392 = PCURVE('',#3711,#16393);+#16393 = DEFINITIONAL_REPRESENTATION('',(#16394),#16398);+#16394 = LINE('',#16395,#16396);+#16395 = CARTESIAN_POINT('',(1.,0.));+#16396 = VECTOR('',#16397,1.);+#16397 = DIRECTION('',(0.,-1.));+#16398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16399 = ORIENTED_EDGE('',*,*,#16282,.T.);+#16400 = ORIENTED_EDGE('',*,*,#16352,.F.);+#16401 = ADVANCED_FACE('',(#16402),#3711,.T.);+#16402 = FACE_BOUND('',#16403,.T.);+#16403 = EDGE_LOOP('',(#16404,#16405,#16426,#16427));+#16404 = ORIENTED_EDGE('',*,*,#3691,.T.);+#16405 = ORIENTED_EDGE('',*,*,#16406,.T.);+#16406 = EDGE_CURVE('',#3656,#16237,#16407,.T.);+#16407 = SURFACE_CURVE('',#16408,(#16412,#16419),.PCURVE_S1.);+#16408 = LINE('',#16409,#16410);+#16409 = CARTESIAN_POINT('',(-0.465128580729,1.310221354167E-02,+ 1.6000001));+#16410 = VECTOR('',#16411,1.);+#16411 = DIRECTION('',(-0.,-0.,-1.));+#16412 = PCURVE('',#3711,#16413);+#16413 = DEFINITIONAL_REPRESENTATION('',(#16414),#16418);+#16414 = LINE('',#16415,#16416);+#16415 = CARTESIAN_POINT('',(0.,0.));+#16416 = VECTOR('',#16417,1.);+#16417 = DIRECTION('',(0.,-1.));+#16418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16419 = PCURVE('',#3675,#16420);+#16420 = DEFINITIONAL_REPRESENTATION('',(#16421),#16425);+#16421 = LINE('',#16422,#16423);+#16422 = CARTESIAN_POINT('',(1.,0.));+#16423 = VECTOR('',#16424,1.);+#16424 = DIRECTION('',(0.,-1.));+#16425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16426 = ORIENTED_EDGE('',*,*,#16259,.T.);+#16427 = ORIENTED_EDGE('',*,*,#16379,.F.);+#16428 = ADVANCED_FACE('',(#16429),#3675,.T.);+#16429 = FACE_BOUND('',#16430,.T.);+#16430 = EDGE_LOOP('',(#16431,#16432,#16453,#16454));+#16431 = ORIENTED_EDGE('',*,*,#3655,.T.);+#16432 = ORIENTED_EDGE('',*,*,#16433,.T.);+#16433 = EDGE_CURVE('',#3629,#16214,#16434,.T.);+#16434 = SURFACE_CURVE('',#16435,(#16439,#16446),.PCURVE_S1.);+#16435 = LINE('',#16436,#16437);+#16436 = CARTESIAN_POINT('',(-0.430721028646,-3.076171875E-03,1.6000001)+ );+#16437 = VECTOR('',#16438,1.);+#16438 = DIRECTION('',(-0.,-0.,-1.));+#16439 = PCURVE('',#3675,#16440);+#16440 = DEFINITIONAL_REPRESENTATION('',(#16441),#16445);+#16441 = LINE('',#16442,#16443);+#16442 = CARTESIAN_POINT('',(0.,0.));+#16443 = VECTOR('',#16444,1.);+#16444 = DIRECTION('',(0.,-1.));+#16445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16446 = PCURVE('',#3644,#16447);+#16447 = DEFINITIONAL_REPRESENTATION('',(#16448),#16452);+#16448 = LINE('',#16449,#16450);+#16449 = CARTESIAN_POINT('',(1.263005102525E-02,0.));+#16450 = VECTOR('',#16451,1.);+#16451 = DIRECTION('',(0.,-1.));+#16452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16453 = ORIENTED_EDGE('',*,*,#16236,.T.);+#16454 = ORIENTED_EDGE('',*,*,#16406,.F.);+#16455 = ADVANCED_FACE('',(#16456),#3644,.T.);+#16456 = FACE_BOUND('',#16457,.T.);+#16457 = EDGE_LOOP('',(#16458,#16459,#16480,#16481));+#16458 = ORIENTED_EDGE('',*,*,#3628,.F.);+#16459 = ORIENTED_EDGE('',*,*,#16460,.T.);+#16460 = EDGE_CURVE('',#3593,#16191,#16461,.T.);+#16461 = SURFACE_CURVE('',#16462,(#16466,#16473),.PCURVE_S1.);+#16462 = LINE('',#16463,#16464);+#16463 = CARTESIAN_POINT('',(-0.418416341146,-5.924479166667E-03,+ 1.6000001));+#16464 = VECTOR('',#16465,1.);+#16465 = DIRECTION('',(-0.,-0.,-1.));+#16466 = PCURVE('',#3644,#16467);+#16467 = DEFINITIONAL_REPRESENTATION('',(#16468),#16472);+#16468 = LINE('',#16469,#16470);+#16469 = CARTESIAN_POINT('',(0.,0.));+#16470 = VECTOR('',#16471,1.);+#16471 = DIRECTION('',(0.,-1.));+#16472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16473 = PCURVE('',#3612,#16474);+#16474 = DEFINITIONAL_REPRESENTATION('',(#16475),#16479);+#16475 = LINE('',#16476,#16477);+#16476 = CARTESIAN_POINT('',(1.,0.));+#16477 = VECTOR('',#16478,1.);+#16478 = DIRECTION('',(0.,-1.));+#16479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16480 = ORIENTED_EDGE('',*,*,#16213,.T.);+#16481 = ORIENTED_EDGE('',*,*,#16433,.F.);+#16482 = ADVANCED_FACE('',(#16483),#3612,.T.);+#16483 = FACE_BOUND('',#16484,.T.);+#16484 = EDGE_LOOP('',(#16485,#16486,#16507,#16508));+#16485 = ORIENTED_EDGE('',*,*,#3592,.T.);+#16486 = ORIENTED_EDGE('',*,*,#16487,.T.);+#16487 = EDGE_CURVE('',#3557,#16168,#16488,.T.);+#16488 = SURFACE_CURVE('',#16489,(#16493,#16500),.PCURVE_S1.);+#16489 = LINE('',#16490,#16491);+#16490 = CARTESIAN_POINT('',(-0.395231119792,-1.629231770833E-02,+ 1.6000001));+#16491 = VECTOR('',#16492,1.);+#16492 = DIRECTION('',(-0.,-0.,-1.));+#16493 = PCURVE('',#3612,#16494);+#16494 = DEFINITIONAL_REPRESENTATION('',(#16495),#16499);+#16495 = LINE('',#16496,#16497);+#16496 = CARTESIAN_POINT('',(0.,0.));+#16497 = VECTOR('',#16498,1.);+#16498 = DIRECTION('',(0.,-1.));+#16499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16500 = PCURVE('',#3576,#16501);+#16501 = DEFINITIONAL_REPRESENTATION('',(#16502),#16506);+#16502 = LINE('',#16503,#16504);+#16503 = CARTESIAN_POINT('',(1.,0.));+#16504 = VECTOR('',#16505,1.);+#16505 = DIRECTION('',(0.,-1.));+#16506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16507 = ORIENTED_EDGE('',*,*,#16190,.T.);+#16508 = ORIENTED_EDGE('',*,*,#16460,.F.);+#16509 = ADVANCED_FACE('',(#16510),#3576,.T.);+#16510 = FACE_BOUND('',#16511,.T.);+#16511 = EDGE_LOOP('',(#16512,#16513,#16534,#16535));+#16512 = ORIENTED_EDGE('',*,*,#3556,.T.);+#16513 = ORIENTED_EDGE('',*,*,#16514,.T.);+#16514 = EDGE_CURVE('',#3521,#16145,#16515,.T.);+#16515 = SURFACE_CURVE('',#16516,(#16520,#16527),.PCURVE_S1.);+#16516 = LINE('',#16517,#16518);+#16517 = CARTESIAN_POINT('',(-0.388566080729,-3.577473958333E-02,+ 1.6000001));+#16518 = VECTOR('',#16519,1.);+#16519 = DIRECTION('',(-0.,-0.,-1.));+#16520 = PCURVE('',#3576,#16521);+#16521 = DEFINITIONAL_REPRESENTATION('',(#16522),#16526);+#16522 = LINE('',#16523,#16524);+#16523 = CARTESIAN_POINT('',(0.,0.));+#16524 = VECTOR('',#16525,1.);+#16525 = DIRECTION('',(0.,-1.));+#16526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16527 = PCURVE('',#3540,#16528);+#16528 = DEFINITIONAL_REPRESENTATION('',(#16529),#16533);+#16529 = LINE('',#16530,#16531);+#16530 = CARTESIAN_POINT('',(1.,0.));+#16531 = VECTOR('',#16532,1.);+#16532 = DIRECTION('',(0.,-1.));+#16533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16534 = ORIENTED_EDGE('',*,*,#16167,.T.);+#16535 = ORIENTED_EDGE('',*,*,#16487,.F.);+#16536 = ADVANCED_FACE('',(#16537),#3540,.T.);+#16537 = FACE_BOUND('',#16538,.T.);+#16538 = EDGE_LOOP('',(#16539,#16540,#16561,#16562));+#16539 = ORIENTED_EDGE('',*,*,#3520,.T.);+#16540 = ORIENTED_EDGE('',*,*,#16541,.T.);+#16541 = EDGE_CURVE('',#3485,#16122,#16542,.T.);+#16542 = SURFACE_CURVE('',#16543,(#16547,#16554),.PCURVE_S1.);+#16543 = LINE('',#16544,#16545);+#16544 = CARTESIAN_POINT('',(-0.398250325521,-5.75927734375E-02,+ 1.6000001));+#16545 = VECTOR('',#16546,1.);+#16546 = DIRECTION('',(-0.,-0.,-1.));+#16547 = PCURVE('',#3540,#16548);+#16548 = DEFINITIONAL_REPRESENTATION('',(#16549),#16553);+#16549 = LINE('',#16550,#16551);+#16550 = CARTESIAN_POINT('',(0.,0.));+#16551 = VECTOR('',#16552,1.);+#16552 = DIRECTION('',(0.,-1.));+#16553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16554 = PCURVE('',#3504,#16555);+#16555 = DEFINITIONAL_REPRESENTATION('',(#16556),#16560);+#16556 = LINE('',#16557,#16558);+#16557 = CARTESIAN_POINT('',(1.,0.));+#16558 = VECTOR('',#16559,1.);+#16559 = DIRECTION('',(0.,-1.));+#16560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16561 = ORIENTED_EDGE('',*,*,#16144,.T.);+#16562 = ORIENTED_EDGE('',*,*,#16514,.F.);+#16563 = ADVANCED_FACE('',(#16564),#3504,.T.);+#16564 = FACE_BOUND('',#16565,.T.);+#16565 = EDGE_LOOP('',(#16566,#16567,#16588,#16589));+#16566 = ORIENTED_EDGE('',*,*,#3484,.T.);+#16567 = ORIENTED_EDGE('',*,*,#16568,.T.);+#16568 = EDGE_CURVE('',#3449,#16099,#16569,.T.);+#16569 = SURFACE_CURVE('',#16570,(#16574,#16581),.PCURVE_S1.);+#16570 = LINE('',#16571,#16572);+#16571 = CARTESIAN_POINT('',(-0.425366210938,-6.539713541667E-02,+ 1.6000001));+#16572 = VECTOR('',#16573,1.);+#16573 = DIRECTION('',(-0.,-0.,-1.));+#16574 = PCURVE('',#3504,#16575);+#16575 = DEFINITIONAL_REPRESENTATION('',(#16576),#16580);+#16576 = LINE('',#16577,#16578);+#16577 = CARTESIAN_POINT('',(0.,0.));+#16578 = VECTOR('',#16579,1.);+#16579 = DIRECTION('',(0.,-1.));+#16580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16581 = PCURVE('',#3468,#16582);+#16582 = DEFINITIONAL_REPRESENTATION('',(#16583),#16587);+#16583 = LINE('',#16584,#16585);+#16584 = CARTESIAN_POINT('',(1.,0.));+#16585 = VECTOR('',#16586,1.);+#16586 = DIRECTION('',(0.,-1.));+#16587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16588 = ORIENTED_EDGE('',*,*,#16121,.T.);+#16589 = ORIENTED_EDGE('',*,*,#16541,.F.);+#16590 = ADVANCED_FACE('',(#16591),#3468,.T.);+#16591 = FACE_BOUND('',#16592,.T.);+#16592 = EDGE_LOOP('',(#16593,#16594,#16615,#16616));+#16593 = ORIENTED_EDGE('',*,*,#3448,.T.);+#16594 = ORIENTED_EDGE('',*,*,#16595,.T.);+#16595 = EDGE_CURVE('',#3413,#16076,#16596,.T.);+#16596 = SURFACE_CURVE('',#16597,(#16601,#16608),.PCURVE_S1.);+#16597 = LINE('',#16598,#16599);+#16598 = CARTESIAN_POINT('',(-0.448893229167,-6.15234375E-02,1.6000001)+ );+#16599 = VECTOR('',#16600,1.);+#16600 = DIRECTION('',(-0.,-0.,-1.));+#16601 = PCURVE('',#3468,#16602);+#16602 = DEFINITIONAL_REPRESENTATION('',(#16603),#16607);+#16603 = LINE('',#16604,#16605);+#16604 = CARTESIAN_POINT('',(0.,0.));+#16605 = VECTOR('',#16606,1.);+#16606 = DIRECTION('',(0.,-1.));+#16607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16608 = PCURVE('',#3432,#16609);+#16609 = DEFINITIONAL_REPRESENTATION('',(#16610),#16614);+#16610 = LINE('',#16611,#16612);+#16611 = CARTESIAN_POINT('',(1.,0.));+#16612 = VECTOR('',#16613,1.);+#16613 = DIRECTION('',(0.,-1.));+#16614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16615 = ORIENTED_EDGE('',*,*,#16098,.T.);+#16616 = ORIENTED_EDGE('',*,*,#16568,.F.);+#16617 = ADVANCED_FACE('',(#16618),#3432,.T.);+#16618 = FACE_BOUND('',#16619,.T.);+#16619 = EDGE_LOOP('',(#16620,#16621,#16642,#16643));+#16620 = ORIENTED_EDGE('',*,*,#3412,.T.);+#16621 = ORIENTED_EDGE('',*,*,#16622,.T.);+#16622 = EDGE_CURVE('',#3386,#16053,#16623,.T.);+#16623 = SURFACE_CURVE('',#16624,(#16628,#16635),.PCURVE_S1.);+#16624 = LINE('',#16625,#16626);+#16625 = CARTESIAN_POINT('',(-0.473673502604,-4.933268229167E-02,+ 1.6000001));+#16626 = VECTOR('',#16627,1.);+#16627 = DIRECTION('',(-0.,-0.,-1.));+#16628 = PCURVE('',#3432,#16629);+#16629 = DEFINITIONAL_REPRESENTATION('',(#16630),#16634);+#16630 = LINE('',#16631,#16632);+#16631 = CARTESIAN_POINT('',(0.,0.));+#16632 = VECTOR('',#16633,1.);+#16633 = DIRECTION('',(0.,-1.));+#16634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16635 = PCURVE('',#3401,#16636);+#16636 = DEFINITIONAL_REPRESENTATION('',(#16637),#16641);+#16637 = LINE('',#16638,#16639);+#16638 = CARTESIAN_POINT('',(2.449544270833E-02,0.));+#16639 = VECTOR('',#16640,1.);+#16640 = DIRECTION('',(0.,-1.));+#16641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16642 = ORIENTED_EDGE('',*,*,#16075,.T.);+#16643 = ORIENTED_EDGE('',*,*,#16595,.F.);+#16644 = ADVANCED_FACE('',(#16645),#3401,.T.);+#16645 = FACE_BOUND('',#16646,.T.);+#16646 = EDGE_LOOP('',(#16647,#16648,#16669,#16670));+#16647 = ORIENTED_EDGE('',*,*,#3385,.F.);+#16648 = ORIENTED_EDGE('',*,*,#16649,.T.);+#16649 = EDGE_CURVE('',#3350,#16030,#16650,.T.);+#16650 = SURFACE_CURVE('',#16651,(#16655,#16662),.PCURVE_S1.);+#16651 = LINE('',#16652,#16653);+#16652 = CARTESIAN_POINT('',(-0.473673502604,-7.3828125E-02,1.6000001));+#16653 = VECTOR('',#16654,1.);+#16654 = DIRECTION('',(-0.,-0.,-1.));+#16655 = PCURVE('',#3401,#16656);+#16656 = DEFINITIONAL_REPRESENTATION('',(#16657),#16661);+#16657 = LINE('',#16658,#16659);+#16658 = CARTESIAN_POINT('',(0.,0.));+#16659 = VECTOR('',#16660,1.);+#16660 = DIRECTION('',(0.,-1.));+#16661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16662 = PCURVE('',#3369,#16663);+#16663 = DEFINITIONAL_REPRESENTATION('',(#16664),#16668);+#16664 = LINE('',#16665,#16666);+#16665 = CARTESIAN_POINT('',(1.,0.));+#16666 = VECTOR('',#16667,1.);+#16667 = DIRECTION('',(0.,-1.));+#16668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16669 = ORIENTED_EDGE('',*,*,#16052,.T.);+#16670 = ORIENTED_EDGE('',*,*,#16622,.F.);+#16671 = ADVANCED_FACE('',(#16672),#3369,.T.);+#16672 = FACE_BOUND('',#16673,.T.);+#16673 = EDGE_LOOP('',(#16674,#16675,#16696,#16697));+#16674 = ORIENTED_EDGE('',*,*,#3349,.T.);+#16675 = ORIENTED_EDGE('',*,*,#16676,.T.);+#16676 = EDGE_CURVE('',#3314,#16007,#16677,.T.);+#16677 = SURFACE_CURVE('',#16678,(#16682,#16689),.PCURVE_S1.);+#16678 = LINE('',#16679,#16680);+#16679 = CARTESIAN_POINT('',(-0.449405924479,-8.15185546875E-02,+ 1.6000001));+#16680 = VECTOR('',#16681,1.);+#16681 = DIRECTION('',(-0.,-0.,-1.));+#16682 = PCURVE('',#3369,#16683);+#16683 = DEFINITIONAL_REPRESENTATION('',(#16684),#16688);+#16684 = LINE('',#16685,#16686);+#16685 = CARTESIAN_POINT('',(0.,0.));+#16686 = VECTOR('',#16687,1.);+#16687 = DIRECTION('',(0.,-1.));+#16688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16689 = PCURVE('',#3333,#16690);+#16690 = DEFINITIONAL_REPRESENTATION('',(#16691),#16695);+#16691 = LINE('',#16692,#16693);+#16692 = CARTESIAN_POINT('',(1.,0.));+#16693 = VECTOR('',#16694,1.);+#16694 = DIRECTION('',(0.,-1.));+#16695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16696 = ORIENTED_EDGE('',*,*,#16029,.T.);+#16697 = ORIENTED_EDGE('',*,*,#16649,.F.);+#16698 = ADVANCED_FACE('',(#16699),#3333,.T.);+#16699 = FACE_BOUND('',#16700,.T.);+#16700 = EDGE_LOOP('',(#16701,#16702,#16723,#16724));+#16701 = ORIENTED_EDGE('',*,*,#3313,.T.);+#16702 = ORIENTED_EDGE('',*,*,#16703,.T.);+#16703 = EDGE_CURVE('',#3278,#15984,#16704,.T.);+#16704 = SURFACE_CURVE('',#16705,(#16709,#16716),.PCURVE_S1.);+#16705 = LINE('',#16706,#16707);+#16706 = CARTESIAN_POINT('',(-0.425366210938,-8.408203125E-02,1.6000001)+ );+#16707 = VECTOR('',#16708,1.);+#16708 = DIRECTION('',(-0.,-0.,-1.));+#16709 = PCURVE('',#3333,#16710);+#16710 = DEFINITIONAL_REPRESENTATION('',(#16711),#16715);+#16711 = LINE('',#16712,#16713);+#16712 = CARTESIAN_POINT('',(0.,0.));+#16713 = VECTOR('',#16714,1.);+#16714 = DIRECTION('',(0.,-1.));+#16715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16716 = PCURVE('',#3297,#16717);+#16717 = DEFINITIONAL_REPRESENTATION('',(#16718),#16722);+#16718 = LINE('',#16719,#16720);+#16719 = CARTESIAN_POINT('',(1.,0.));+#16720 = VECTOR('',#16721,1.);+#16721 = DIRECTION('',(0.,-1.));+#16722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16723 = ORIENTED_EDGE('',*,*,#16006,.T.);+#16724 = ORIENTED_EDGE('',*,*,#16676,.F.);+#16725 = ADVANCED_FACE('',(#16726),#3297,.T.);+#16726 = FACE_BOUND('',#16727,.T.);+#16727 = EDGE_LOOP('',(#16728,#16729,#16750,#16751));+#16728 = ORIENTED_EDGE('',*,*,#3277,.T.);+#16729 = ORIENTED_EDGE('',*,*,#16730,.T.);+#16730 = EDGE_CURVE('',#3242,#15961,#16731,.T.);+#16731 = SURFACE_CURVE('',#16732,(#16736,#16743),.PCURVE_S1.);+#16732 = LINE('',#16733,#16734);+#16733 = CARTESIAN_POINT('',(-0.381616210937,-7.132161458333E-02,+ 1.6000001));+#16734 = VECTOR('',#16735,1.);+#16735 = DIRECTION('',(-0.,-0.,-1.));+#16736 = PCURVE('',#3297,#16737);+#16737 = DEFINITIONAL_REPRESENTATION('',(#16738),#16742);+#16738 = LINE('',#16739,#16740);+#16739 = CARTESIAN_POINT('',(0.,0.));+#16740 = VECTOR('',#16741,1.);+#16741 = DIRECTION('',(0.,-1.));+#16742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16743 = PCURVE('',#3261,#16744);+#16744 = DEFINITIONAL_REPRESENTATION('',(#16745),#16749);+#16745 = LINE('',#16746,#16747);+#16746 = CARTESIAN_POINT('',(1.,0.));+#16747 = VECTOR('',#16748,1.);+#16748 = DIRECTION('',(0.,-1.));+#16749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16750 = ORIENTED_EDGE('',*,*,#15983,.T.);+#16751 = ORIENTED_EDGE('',*,*,#16703,.F.);+#16752 = ADVANCED_FACE('',(#16753),#3261,.T.);+#16753 = FACE_BOUND('',#16754,.T.);+#16754 = EDGE_LOOP('',(#16755,#16756,#16777,#16778));+#16755 = ORIENTED_EDGE('',*,*,#3241,.T.);+#16756 = ORIENTED_EDGE('',*,*,#16757,.T.);+#16757 = EDGE_CURVE('',#3206,#15938,#16758,.T.);+#16758 = SURFACE_CURVE('',#16759,(#16763,#16770),.PCURVE_S1.);+#16759 = LINE('',#16760,#16761);+#16760 = CARTESIAN_POINT('',(-0.366577148438,-3.429361979167E-02,+ 1.6000001));+#16761 = VECTOR('',#16762,1.);+#16762 = DIRECTION('',(-0.,-0.,-1.));+#16763 = PCURVE('',#3261,#16764);+#16764 = DEFINITIONAL_REPRESENTATION('',(#16765),#16769);+#16765 = LINE('',#16766,#16767);+#16766 = CARTESIAN_POINT('',(0.,0.));+#16767 = VECTOR('',#16768,1.);+#16768 = DIRECTION('',(0.,-1.));+#16769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16770 = PCURVE('',#3225,#16771);+#16771 = DEFINITIONAL_REPRESENTATION('',(#16772),#16776);+#16772 = LINE('',#16773,#16774);+#16773 = CARTESIAN_POINT('',(1.,0.));+#16774 = VECTOR('',#16775,1.);+#16775 = DIRECTION('',(0.,-1.));+#16776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16777 = ORIENTED_EDGE('',*,*,#15960,.T.);+#16778 = ORIENTED_EDGE('',*,*,#16730,.F.);+#16779 = ADVANCED_FACE('',(#16780),#3225,.T.);+#16780 = FACE_BOUND('',#16781,.T.);+#16781 = EDGE_LOOP('',(#16782,#16783,#16804,#16805));+#16782 = ORIENTED_EDGE('',*,*,#3205,.T.);+#16783 = ORIENTED_EDGE('',*,*,#16784,.T.);+#16784 = EDGE_CURVE('',#3170,#15915,#16785,.T.);+#16785 = SURFACE_CURVE('',#16786,(#16790,#16797),.PCURVE_S1.);+#16786 = LINE('',#16787,#16788);+#16787 = CARTESIAN_POINT('',(-0.377514648438,-1.708984375E-03,1.6000001)+ );+#16788 = VECTOR('',#16789,1.);+#16789 = DIRECTION('',(-0.,-0.,-1.));+#16790 = PCURVE('',#3225,#16791);+#16791 = DEFINITIONAL_REPRESENTATION('',(#16792),#16796);+#16792 = LINE('',#16793,#16794);+#16793 = CARTESIAN_POINT('',(0.,0.));+#16794 = VECTOR('',#16795,1.);+#16795 = DIRECTION('',(0.,-1.));+#16796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16797 = PCURVE('',#3189,#16798);+#16798 = DEFINITIONAL_REPRESENTATION('',(#16799),#16803);+#16799 = LINE('',#16800,#16801);+#16800 = CARTESIAN_POINT('',(1.,0.));+#16801 = VECTOR('',#16802,1.);+#16802 = DIRECTION('',(0.,-1.));+#16803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16804 = ORIENTED_EDGE('',*,*,#15937,.T.);+#16805 = ORIENTED_EDGE('',*,*,#16757,.F.);+#16806 = ADVANCED_FACE('',(#16807),#3189,.T.);+#16807 = FACE_BOUND('',#16808,.T.);+#16808 = EDGE_LOOP('',(#16809,#16810,#16831,#16832));+#16809 = ORIENTED_EDGE('',*,*,#3169,.T.);+#16810 = ORIENTED_EDGE('',*,*,#16811,.T.);+#16811 = EDGE_CURVE('',#3143,#15892,#16812,.T.);+#16812 = SURFACE_CURVE('',#16813,(#16817,#16824),.PCURVE_S1.);+#16813 = LINE('',#16814,#16815);+#16814 = CARTESIAN_POINT('',(-0.412377929688,1.583658854167E-02,+ 1.6000001));+#16815 = VECTOR('',#16816,1.);+#16816 = DIRECTION('',(-0.,-0.,-1.));+#16817 = PCURVE('',#3189,#16818);+#16818 = DEFINITIONAL_REPRESENTATION('',(#16819),#16823);+#16819 = LINE('',#16820,#16821);+#16820 = CARTESIAN_POINT('',(0.,0.));+#16821 = VECTOR('',#16822,1.);+#16822 = DIRECTION('',(0.,-1.));+#16823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16824 = PCURVE('',#3158,#16825);+#16825 = DEFINITIONAL_REPRESENTATION('',(#16826),#16830);+#16826 = LINE('',#16827,#16828);+#16827 = CARTESIAN_POINT('',(1.23825061438E-02,0.));+#16828 = VECTOR('',#16829,1.);+#16829 = DIRECTION('',(0.,-1.));+#16830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16831 = ORIENTED_EDGE('',*,*,#15914,.T.);+#16832 = ORIENTED_EDGE('',*,*,#16784,.F.);+#16833 = ADVANCED_FACE('',(#16834),#3158,.T.);+#16834 = FACE_BOUND('',#16835,.T.);+#16835 = EDGE_LOOP('',(#16836,#16837,#16858,#16859));+#16836 = ORIENTED_EDGE('',*,*,#3142,.F.);+#16837 = ORIENTED_EDGE('',*,*,#16838,.T.);+#16838 = EDGE_CURVE('',#3107,#15869,#16839,.T.);+#16839 = SURFACE_CURVE('',#16840,(#16844,#16851),.PCURVE_S1.);+#16840 = LINE('',#16841,#16842);+#16841 = CARTESIAN_POINT('',(-0.424454752604,1.857096354167E-02,+ 1.6000001));+#16842 = VECTOR('',#16843,1.);+#16843 = DIRECTION('',(-0.,-0.,-1.));+#16844 = PCURVE('',#3158,#16845);+#16845 = DEFINITIONAL_REPRESENTATION('',(#16846),#16850);+#16846 = LINE('',#16847,#16848);+#16847 = CARTESIAN_POINT('',(0.,0.));+#16848 = VECTOR('',#16849,1.);+#16849 = DIRECTION('',(0.,-1.));+#16850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16851 = PCURVE('',#3126,#16852);+#16852 = DEFINITIONAL_REPRESENTATION('',(#16853),#16857);+#16853 = LINE('',#16854,#16855);+#16854 = CARTESIAN_POINT('',(1.,0.));+#16855 = VECTOR('',#16856,1.);+#16856 = DIRECTION('',(0.,-1.));+#16857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16858 = ORIENTED_EDGE('',*,*,#15891,.T.);+#16859 = ORIENTED_EDGE('',*,*,#16811,.F.);+#16860 = ADVANCED_FACE('',(#16861),#3126,.T.);+#16861 = FACE_BOUND('',#16862,.T.);+#16862 = EDGE_LOOP('',(#16863,#16864,#16885,#16886));+#16863 = ORIENTED_EDGE('',*,*,#3106,.T.);+#16864 = ORIENTED_EDGE('',*,*,#16865,.T.);+#16865 = EDGE_CURVE('',#3071,#15846,#16866,.T.);+#16866 = SURFACE_CURVE('',#16867,(#16871,#16878),.PCURVE_S1.);+#16867 = LINE('',#16868,#16869);+#16868 = CARTESIAN_POINT('',(-0.447639973958,2.848307291667E-02,+ 1.6000001));+#16869 = VECTOR('',#16870,1.);+#16870 = DIRECTION('',(-0.,-0.,-1.));+#16871 = PCURVE('',#3126,#16872);+#16872 = DEFINITIONAL_REPRESENTATION('',(#16873),#16877);+#16873 = LINE('',#16874,#16875);+#16874 = CARTESIAN_POINT('',(0.,0.));+#16875 = VECTOR('',#16876,1.);+#16876 = DIRECTION('',(0.,-1.));+#16877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16878 = PCURVE('',#3090,#16879);+#16879 = DEFINITIONAL_REPRESENTATION('',(#16880),#16884);+#16880 = LINE('',#16881,#16882);+#16881 = CARTESIAN_POINT('',(1.,0.));+#16882 = VECTOR('',#16883,1.);+#16883 = DIRECTION('',(0.,-1.));+#16884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16885 = ORIENTED_EDGE('',*,*,#15868,.T.);+#16886 = ORIENTED_EDGE('',*,*,#16838,.F.);+#16887 = ADVANCED_FACE('',(#16888),#3090,.T.);+#16888 = FACE_BOUND('',#16889,.T.);+#16889 = EDGE_LOOP('',(#16890,#16891,#16912,#16913));+#16890 = ORIENTED_EDGE('',*,*,#3070,.T.);+#16891 = ORIENTED_EDGE('',*,*,#16892,.T.);+#16892 = EDGE_CURVE('',#3026,#15823,#16893,.T.);+#16893 = SURFACE_CURVE('',#16894,(#16898,#16905),.PCURVE_S1.);+#16894 = LINE('',#16895,#16896);+#16895 = CARTESIAN_POINT('',(-0.453849283854,4.568684895833E-02,+ 1.6000001));+#16896 = VECTOR('',#16897,1.);+#16897 = DIRECTION('',(-0.,-0.,-1.));+#16898 = PCURVE('',#3090,#16899);+#16899 = DEFINITIONAL_REPRESENTATION('',(#16900),#16904);+#16900 = LINE('',#16901,#16902);+#16901 = CARTESIAN_POINT('',(0.,0.));+#16902 = VECTOR('',#16903,1.);+#16903 = DIRECTION('',(0.,-1.));+#16904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16905 = PCURVE('',#3051,#16906);+#16906 = DEFINITIONAL_REPRESENTATION('',(#16907),#16911);+#16907 = LINE('',#16908,#16909);+#16908 = CARTESIAN_POINT('',(1.,0.));+#16909 = VECTOR('',#16910,1.);+#16910 = DIRECTION('',(0.,-1.));+#16911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16912 = ORIENTED_EDGE('',*,*,#15845,.T.);+#16913 = ORIENTED_EDGE('',*,*,#16865,.F.);+#16914 = ADVANCED_FACE('',(#16915),#3051,.T.);+#16915 = FACE_BOUND('',#16916,.T.);+#16916 = EDGE_LOOP('',(#16917,#16918,#16939,#16940));+#16917 = ORIENTED_EDGE('',*,*,#3025,.T.);+#16918 = ORIENTED_EDGE('',*,*,#16919,.T.);+#16919 = EDGE_CURVE('',#2990,#15800,#16920,.T.);+#16920 = SURFACE_CURVE('',#16921,(#16925,#16932),.PCURVE_S1.);+#16921 = LINE('',#16922,#16923);+#16922 = CARTESIAN_POINT('',(-0.444392903646,6.61376953125E-02,1.6000001+ ));+#16923 = VECTOR('',#16924,1.);+#16924 = DIRECTION('',(-0.,-0.,-1.));+#16925 = PCURVE('',#3051,#16926);+#16926 = DEFINITIONAL_REPRESENTATION('',(#16927),#16931);+#16927 = LINE('',#16928,#16929);+#16928 = CARTESIAN_POINT('',(0.,0.));+#16929 = VECTOR('',#16930,1.);+#16930 = DIRECTION('',(0.,-1.));+#16931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16932 = PCURVE('',#3009,#16933);+#16933 = DEFINITIONAL_REPRESENTATION('',(#16934),#16938);+#16934 = LINE('',#16935,#16936);+#16935 = CARTESIAN_POINT('',(1.,0.));+#16936 = VECTOR('',#16937,1.);+#16937 = DIRECTION('',(0.,-1.));+#16938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16939 = ORIENTED_EDGE('',*,*,#15822,.T.);+#16940 = ORIENTED_EDGE('',*,*,#16892,.F.);+#16941 = ADVANCED_FACE('',(#16942),#3009,.T.);+#16942 = FACE_BOUND('',#16943,.T.);+#16943 = EDGE_LOOP('',(#16944,#16945,#16966,#16967));+#16944 = ORIENTED_EDGE('',*,*,#2989,.T.);+#16945 = ORIENTED_EDGE('',*,*,#16946,.T.);+#16946 = EDGE_CURVE('',#2954,#15777,#16947,.T.);+#16947 = SURFACE_CURVE('',#16948,(#16952,#16959),.PCURVE_S1.);+#16948 = LINE('',#16949,#16950);+#16949 = CARTESIAN_POINT('',(-0.418644205729,7.371419270833E-02,+ 1.6000001));+#16950 = VECTOR('',#16951,1.);+#16951 = DIRECTION('',(-0.,-0.,-1.));+#16952 = PCURVE('',#3009,#16953);+#16953 = DEFINITIONAL_REPRESENTATION('',(#16954),#16958);+#16954 = LINE('',#16955,#16956);+#16955 = CARTESIAN_POINT('',(0.,0.));+#16956 = VECTOR('',#16957,1.);+#16957 = DIRECTION('',(0.,-1.));+#16958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16959 = PCURVE('',#2973,#16960);+#16960 = DEFINITIONAL_REPRESENTATION('',(#16961),#16965);+#16961 = LINE('',#16962,#16963);+#16962 = CARTESIAN_POINT('',(1.,0.));+#16963 = VECTOR('',#16964,1.);+#16964 = DIRECTION('',(0.,-1.));+#16965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16966 = ORIENTED_EDGE('',*,*,#15799,.T.);+#16967 = ORIENTED_EDGE('',*,*,#16919,.F.);+#16968 = ADVANCED_FACE('',(#16969),#2973,.T.);+#16969 = FACE_BOUND('',#16970,.T.);+#16970 = EDGE_LOOP('',(#16971,#16972,#16993,#16994));+#16971 = ORIENTED_EDGE('',*,*,#2953,.T.);+#16972 = ORIENTED_EDGE('',*,*,#16973,.T.);+#16973 = EDGE_CURVE('',#2918,#15754,#16974,.T.);+#16974 = SURFACE_CURVE('',#16975,(#16979,#16986),.PCURVE_S1.);+#16975 = LINE('',#16976,#16977);+#16976 = CARTESIAN_POINT('',(-0.397395833333,7.029622395833E-02,+ 1.6000001));+#16977 = VECTOR('',#16978,1.);+#16978 = DIRECTION('',(-0.,-0.,-1.));+#16979 = PCURVE('',#2973,#16980);+#16980 = DEFINITIONAL_REPRESENTATION('',(#16981),#16985);+#16981 = LINE('',#16982,#16983);+#16982 = CARTESIAN_POINT('',(0.,0.));+#16983 = VECTOR('',#16984,1.);+#16984 = DIRECTION('',(0.,-1.));+#16985 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16986 = PCURVE('',#2937,#16987);+#16987 = DEFINITIONAL_REPRESENTATION('',(#16988),#16992);+#16988 = LINE('',#16989,#16990);+#16989 = CARTESIAN_POINT('',(1.,0.));+#16990 = VECTOR('',#16991,1.);+#16991 = DIRECTION('',(0.,-1.));+#16992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#16993 = ORIENTED_EDGE('',*,*,#15776,.T.);+#16994 = ORIENTED_EDGE('',*,*,#16946,.F.);+#16995 = ADVANCED_FACE('',(#16996),#2937,.T.);+#16996 = FACE_BOUND('',#16997,.T.);+#16997 = EDGE_LOOP('',(#16998,#16999,#17020,#17021));+#16998 = ORIENTED_EDGE('',*,*,#2917,.T.);+#16999 = ORIENTED_EDGE('',*,*,#17000,.T.);+#17000 = EDGE_CURVE('',#2891,#15731,#17001,.T.);+#17001 = SURFACE_CURVE('',#17002,(#17006,#17013),.PCURVE_S1.);+#17002 = LINE('',#17003,#17004);+#17003 = CARTESIAN_POINT('',(-0.376375325521,6.015625E-02,1.6000001));+#17004 = VECTOR('',#17005,1.);+#17005 = DIRECTION('',(-0.,-0.,-1.));+#17006 = PCURVE('',#2937,#17007);+#17007 = DEFINITIONAL_REPRESENTATION('',(#17008),#17012);+#17008 = LINE('',#17009,#17010);+#17009 = CARTESIAN_POINT('',(0.,0.));+#17010 = VECTOR('',#17011,1.);+#17011 = DIRECTION('',(0.,-1.));+#17012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17013 = PCURVE('',#2906,#17014);+#17014 = DEFINITIONAL_REPRESENTATION('',(#17015),#17019);+#17015 = LINE('',#17016,#17017);+#17016 = CARTESIAN_POINT('',(2.335611979167E-02,0.));+#17017 = VECTOR('',#17018,1.);+#17018 = DIRECTION('',(0.,-1.));+#17019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17020 = ORIENTED_EDGE('',*,*,#15753,.T.);+#17021 = ORIENTED_EDGE('',*,*,#16973,.F.);+#17022 = ADVANCED_FACE('',(#17023),#2906,.T.);+#17023 = FACE_BOUND('',#17024,.T.);+#17024 = EDGE_LOOP('',(#17025,#17026,#17047,#17048));+#17025 = ORIENTED_EDGE('',*,*,#2890,.F.);+#17026 = ORIENTED_EDGE('',*,*,#17027,.T.);+#17027 = EDGE_CURVE('',#2853,#15729,#17028,.T.);+#17028 = SURFACE_CURVE('',#17029,(#17033,#17040),.PCURVE_S1.);+#17029 = LINE('',#17030,#17031);+#17030 = CARTESIAN_POINT('',(-0.376375325521,8.351236979167E-02,+ 1.6000001));+#17031 = VECTOR('',#17032,1.);+#17032 = DIRECTION('',(-0.,-0.,-1.));+#17033 = PCURVE('',#2906,#17034);+#17034 = DEFINITIONAL_REPRESENTATION('',(#17035),#17039);+#17035 = LINE('',#17036,#17037);+#17036 = CARTESIAN_POINT('',(0.,0.));+#17037 = VECTOR('',#17038,1.);+#17038 = DIRECTION('',(0.,-1.));+#17039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17040 = PCURVE('',#2874,#17041);+#17041 = DEFINITIONAL_REPRESENTATION('',(#17042),#17046);+#17042 = LINE('',#17043,#17044);+#17043 = CARTESIAN_POINT('',(1.,0.));+#17044 = VECTOR('',#17045,1.);+#17045 = DIRECTION('',(0.,-1.));+#17046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17047 = ORIENTED_EDGE('',*,*,#15728,.T.);+#17048 = ORIENTED_EDGE('',*,*,#17000,.F.);+#17049 = ADVANCED_FACE('',(#17050),#2874,.T.);+#17050 = FACE_BOUND('',#17051,.T.);+#17051 = EDGE_LOOP('',(#17052,#17053,#17054,#17055));+#17052 = ORIENTED_EDGE('',*,*,#2852,.T.);+#17053 = ORIENTED_EDGE('',*,*,#15704,.T.);+#17054 = ORIENTED_EDGE('',*,*,#16327,.T.);+#17055 = ORIENTED_EDGE('',*,*,#17027,.F.);+#17056 = ADVANCED_FACE('',(#17057),#2839,.T.);+#17057 = FACE_BOUND('',#17058,.T.);+#17058 = EDGE_LOOP('',(#17059,#17060,#17083,#17111));+#17059 = ORIENTED_EDGE('',*,*,#2825,.F.);+#17060 = ORIENTED_EDGE('',*,*,#17061,.T.);+#17061 = EDGE_CURVE('',#2799,#17062,#17064,.T.);+#17062 = VERTEX_POINT('',#17063);+#17063 = CARTESIAN_POINT('',(-0.586694335938,-1.241861979167E-02,+ 1.5000001));+#17064 = SURFACE_CURVE('',#17065,(#17069,#17076),.PCURVE_S1.);+#17065 = LINE('',#17066,#17067);+#17066 = CARTESIAN_POINT('',(-0.586694335938,-1.241861979167E-02,+ 1.6000001));+#17067 = VECTOR('',#17068,1.);+#17068 = DIRECTION('',(-0.,-0.,-1.));+#17069 = PCURVE('',#2839,#17070);+#17070 = DEFINITIONAL_REPRESENTATION('',(#17071),#17075);+#17071 = LINE('',#17072,#17073);+#17072 = CARTESIAN_POINT('',(0.,0.));+#17073 = VECTOR('',#17074,1.);+#17074 = DIRECTION('',(0.,-1.));+#17075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17076 = PCURVE('',#2814,#17077);+#17077 = DEFINITIONAL_REPRESENTATION('',(#17078),#17082);+#17078 = LINE('',#17079,#17080);+#17079 = CARTESIAN_POINT('',(2.666015625E-02,0.));+#17080 = VECTOR('',#17081,1.);+#17081 = DIRECTION('',(0.,-1.));+#17082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17083 = ORIENTED_EDGE('',*,*,#17084,.T.);+#17084 = EDGE_CURVE('',#17062,#17085,#17087,.T.);+#17085 = VERTEX_POINT('',#17086);+#17086 = CARTESIAN_POINT('',(-0.586694335938,-8.077799479167E-02,+ 1.5000001));+#17087 = SURFACE_CURVE('',#17088,(#17092,#17099),.PCURVE_S1.);+#17088 = LINE('',#17089,#17090);+#17089 = CARTESIAN_POINT('',(-0.586694335938,-1.241861979167E-02,+ 1.5000001));+#17090 = VECTOR('',#17091,1.);+#17091 = DIRECTION('',(0.,-1.,0.));+#17092 = PCURVE('',#2839,#17093);+#17093 = DEFINITIONAL_REPRESENTATION('',(#17094),#17098);+#17094 = LINE('',#17095,#17096);+#17095 = CARTESIAN_POINT('',(0.,-0.1));+#17096 = VECTOR('',#17097,1.);+#17097 = DIRECTION('',(1.,0.));+#17098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17099 = PCURVE('',#17100,#17105);+#17100 = PLANE('',#17101);+#17101 = AXIS2_PLACEMENT_3D('',#17102,#17103,#17104);+#17102 = CARTESIAN_POINT('',(-0.632153320313,-8.077799479167E-02,+ 1.5000001));+#17103 = DIRECTION('',(0.,0.,1.));+#17104 = DIRECTION('',(1.,0.,0.));+#17105 = DEFINITIONAL_REPRESENTATION('',(#17106),#17110);+#17106 = LINE('',#17107,#17108);+#17107 = CARTESIAN_POINT('',(4.5458984375E-02,6.8359375E-02));+#17108 = VECTOR('',#17109,1.);+#17109 = DIRECTION('',(0.,-1.));+#17110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17111 = ORIENTED_EDGE('',*,*,#17112,.F.);+#17112 = EDGE_CURVE('',#2563,#17085,#17113,.T.);+#17113 = SURFACE_CURVE('',#17114,(#17118,#17125),.PCURVE_S1.);+#17114 = LINE('',#17115,#17116);+#17115 = CARTESIAN_POINT('',(-0.586694335938,-8.077799479167E-02,+ 1.6000001));+#17116 = VECTOR('',#17117,1.);+#17117 = DIRECTION('',(-0.,-0.,-1.));+#17118 = PCURVE('',#2839,#17119);+#17119 = DEFINITIONAL_REPRESENTATION('',(#17120),#17124);+#17120 = LINE('',#17121,#17122);+#17121 = CARTESIAN_POINT('',(6.8359375E-02,0.));+#17122 = VECTOR('',#17123,1.);+#17123 = DIRECTION('',(0.,-1.));+#17124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17125 = PCURVE('',#2580,#17126);+#17126 = DEFINITIONAL_REPRESENTATION('',(#17127),#17131);+#17127 = LINE('',#17128,#17129);+#17128 = CARTESIAN_POINT('',(0.,0.));+#17129 = VECTOR('',#17130,1.);+#17130 = DIRECTION('',(0.,-1.));+#17131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17132 = ADVANCED_FACE('',(#17133,#17318),#17100,.T.);+#17133 = FACE_BOUND('',#17134,.F.);+#17134 = EDGE_LOOP('',(#17135,#17160,#17183,#17206,#17229,#17252,#17275,+ #17296,#17297));+#17135 = ORIENTED_EDGE('',*,*,#17136,.T.);+#17136 = EDGE_CURVE('',#17137,#17139,#17141,.T.);+#17137 = VERTEX_POINT('',#17138);+#17138 = CARTESIAN_POINT('',(-0.609708658854,-8.077799479167E-02,+ 1.5000001));+#17139 = VERTEX_POINT('',#17140);+#17140 = CARTESIAN_POINT('',(-0.609708658854,8.932291666667E-02,+ 1.5000001));+#17141 = SURFACE_CURVE('',#17142,(#17146,#17153),.PCURVE_S1.);+#17142 = LINE('',#17143,#17144);+#17143 = CARTESIAN_POINT('',(-0.609708658854,-8.077799479167E-02,+ 1.5000001));+#17144 = VECTOR('',#17145,1.);+#17145 = DIRECTION('',(0.,1.,0.));+#17146 = PCURVE('',#17100,#17147);+#17147 = DEFINITIONAL_REPRESENTATION('',(#17148),#17152);+#17148 = LINE('',#17149,#17150);+#17149 = CARTESIAN_POINT('',(2.244466145833E-02,0.));+#17150 = VECTOR('',#17151,1.);+#17151 = DIRECTION('',(0.,1.));+#17152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17153 = PCURVE('',#2607,#17154);+#17154 = DEFINITIONAL_REPRESENTATION('',(#17155),#17159);+#17155 = LINE('',#17156,#17157);+#17156 = CARTESIAN_POINT('',(0.,-0.1));+#17157 = VECTOR('',#17158,1.);+#17158 = DIRECTION('',(1.,0.));+#17159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17160 = ORIENTED_EDGE('',*,*,#17161,.T.);+#17161 = EDGE_CURVE('',#17139,#17162,#17164,.T.);+#17162 = VERTEX_POINT('',#17163);+#17163 = CARTESIAN_POINT('',(-0.560034179688,8.932291666667E-02,+ 1.5000001));+#17164 = SURFACE_CURVE('',#17165,(#17169,#17176),.PCURVE_S1.);+#17165 = LINE('',#17166,#17167);+#17166 = CARTESIAN_POINT('',(-0.609708658854,8.932291666667E-02,+ 1.5000001));+#17167 = VECTOR('',#17168,1.);+#17168 = DIRECTION('',(1.,0.,0.));+#17169 = PCURVE('',#17100,#17170);+#17170 = DEFINITIONAL_REPRESENTATION('',(#17171),#17175);+#17171 = LINE('',#17172,#17173);+#17172 = CARTESIAN_POINT('',(2.244466145833E-02,0.170100911458));+#17173 = VECTOR('',#17174,1.);+#17174 = DIRECTION('',(1.,0.));+#17175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17176 = PCURVE('',#2634,#17177);+#17177 = DEFINITIONAL_REPRESENTATION('',(#17178),#17182);+#17178 = LINE('',#17179,#17180);+#17179 = CARTESIAN_POINT('',(0.,-0.1));+#17180 = VECTOR('',#17181,1.);+#17181 = DIRECTION('',(1.,0.));+#17182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17183 = ORIENTED_EDGE('',*,*,#17184,.T.);+#17184 = EDGE_CURVE('',#17162,#17185,#17187,.T.);+#17185 = VERTEX_POINT('',#17186);+#17186 = CARTESIAN_POINT('',(-0.516853841146,7.63916015625E-02,1.5000001+ ));+#17187 = SURFACE_CURVE('',#17188,(#17192,#17199),.PCURVE_S1.);+#17188 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17189,#17190,#17191),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17189 = CARTESIAN_POINT('',(-0.560034179688,8.932291666667E-02,+ 1.5000001));+#17190 = CARTESIAN_POINT('',(-0.531551106771,8.932291666667E-02,+ 1.5000001));+#17191 = CARTESIAN_POINT('',(-0.516853841146,7.63916015625E-02,1.5000001+ ));+#17192 = PCURVE('',#17100,#17193);+#17193 = DEFINITIONAL_REPRESENTATION('',(#17194),#17198);+#17194 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17195,#17196,#17197),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17195 = CARTESIAN_POINT('',(7.2119140625E-02,0.170100911458));+#17196 = CARTESIAN_POINT('',(0.100602213542,0.170100911458));+#17197 = CARTESIAN_POINT('',(0.115299479167,0.157169596354));+#17198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17199 = PCURVE('',#2665,#17200);+#17200 = DEFINITIONAL_REPRESENTATION('',(#17201),#17205);+#17201 = LINE('',#17202,#17203);+#17202 = CARTESIAN_POINT('',(0.,-0.1));+#17203 = VECTOR('',#17204,1.);+#17204 = DIRECTION('',(1.,0.));+#17205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17206 = ORIENTED_EDGE('',*,*,#17207,.T.);+#17207 = EDGE_CURVE('',#17185,#17208,#17210,.T.);+#17208 = VERTEX_POINT('',#17209);+#17209 = CARTESIAN_POINT('',(-0.502156575521,3.850911458333E-02,+ 1.5000001));+#17210 = SURFACE_CURVE('',#17211,(#17215,#17222),.PCURVE_S1.);+#17211 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17212,#17213,#17214),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17212 = CARTESIAN_POINT('',(-0.516853841146,7.63916015625E-02,1.5000001+ ));+#17213 = CARTESIAN_POINT('',(-0.502156575521,6.346028645833E-02,+ 1.5000001));+#17214 = CARTESIAN_POINT('',(-0.502156575521,3.850911458333E-02,+ 1.5000001));+#17215 = PCURVE('',#17100,#17216);+#17216 = DEFINITIONAL_REPRESENTATION('',(#17217),#17221);+#17217 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17218,#17219,#17220),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17218 = CARTESIAN_POINT('',(0.115299479167,0.157169596354));+#17219 = CARTESIAN_POINT('',(0.129996744792,0.14423828125));+#17220 = CARTESIAN_POINT('',(0.129996744792,0.119287109375));+#17221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17222 = PCURVE('',#2701,#17223);+#17223 = DEFINITIONAL_REPRESENTATION('',(#17224),#17228);+#17224 = LINE('',#17225,#17226);+#17225 = CARTESIAN_POINT('',(0.,-0.1));+#17226 = VECTOR('',#17227,1.);+#17227 = DIRECTION('',(1.,0.));+#17228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17229 = ORIENTED_EDGE('',*,*,#17230,.T.);+#17230 = EDGE_CURVE('',#17208,#17231,#17233,.T.);+#17231 = VERTEX_POINT('',#17232);+#17232 = CARTESIAN_POINT('',(-0.516796875,4.557291666667E-04,1.5000001)+ );+#17233 = SURFACE_CURVE('',#17234,(#17238,#17245),.PCURVE_S1.);+#17234 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17235,#17236,#17237),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17235 = CARTESIAN_POINT('',(-0.502156575521,3.850911458333E-02,+ 1.5000001));+#17236 = CARTESIAN_POINT('',(-0.502156575521,1.3330078125E-02,1.5000001)+ );+#17237 = CARTESIAN_POINT('',(-0.516796875,4.557291666667E-04,1.5000001)+ );+#17238 = PCURVE('',#17100,#17239);+#17239 = DEFINITIONAL_REPRESENTATION('',(#17240),#17244);+#17240 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17241,#17242,#17243),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17241 = CARTESIAN_POINT('',(0.129996744792,0.119287109375));+#17242 = CARTESIAN_POINT('',(0.129996744792,9.410807291667E-02));+#17243 = CARTESIAN_POINT('',(0.115356445312,8.123372395833E-02));+#17244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17245 = PCURVE('',#2743,#17246);+#17246 = DEFINITIONAL_REPRESENTATION('',(#17247),#17251);+#17247 = LINE('',#17248,#17249);+#17248 = CARTESIAN_POINT('',(0.,-0.1));+#17249 = VECTOR('',#17250,1.);+#17250 = DIRECTION('',(1.,0.));+#17251 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17252 = ORIENTED_EDGE('',*,*,#17253,.T.);+#17253 = EDGE_CURVE('',#17231,#17254,#17256,.T.);+#17254 = VERTEX_POINT('',#17255);+#17255 = CARTESIAN_POINT('',(-0.560034179688,-1.241861979167E-02,+ 1.5000001));+#17256 = SURFACE_CURVE('',#17257,(#17261,#17268),.PCURVE_S1.);+#17257 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17258,#17259,#17260),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17258 = CARTESIAN_POINT('',(-0.516796875,4.557291666667E-04,1.5000001)+ );+#17259 = CARTESIAN_POINT('',(-0.531437174479,-1.241861979167E-02,+ 1.5000001));+#17260 = CARTESIAN_POINT('',(-0.560034179688,-1.241861979167E-02,+ 1.5000001));+#17261 = PCURVE('',#17100,#17262);+#17262 = DEFINITIONAL_REPRESENTATION('',(#17263),#17267);+#17263 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17264,#17265,#17266),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17264 = CARTESIAN_POINT('',(0.115356445312,8.123372395833E-02));+#17265 = CARTESIAN_POINT('',(0.100716145833,6.8359375E-02));+#17266 = CARTESIAN_POINT('',(7.2119140625E-02,6.8359375E-02));+#17267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17268 = PCURVE('',#2782,#17269);+#17269 = DEFINITIONAL_REPRESENTATION('',(#17270),#17274);+#17270 = LINE('',#17271,#17272);+#17271 = CARTESIAN_POINT('',(0.,-0.1));+#17272 = VECTOR('',#17273,1.);+#17273 = DIRECTION('',(1.,0.));+#17274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17275 = ORIENTED_EDGE('',*,*,#17276,.T.);+#17276 = EDGE_CURVE('',#17254,#17062,#17277,.T.);+#17277 = SURFACE_CURVE('',#17278,(#17282,#17289),.PCURVE_S1.);+#17278 = LINE('',#17279,#17280);+#17279 = CARTESIAN_POINT('',(-0.560034179688,-1.241861979167E-02,+ 1.5000001));+#17280 = VECTOR('',#17281,1.);+#17281 = DIRECTION('',(-1.,0.,0.));+#17282 = PCURVE('',#17100,#17283);+#17283 = DEFINITIONAL_REPRESENTATION('',(#17284),#17288);+#17284 = LINE('',#17285,#17286);+#17285 = CARTESIAN_POINT('',(7.2119140625E-02,6.8359375E-02));+#17286 = VECTOR('',#17287,1.);+#17287 = DIRECTION('',(-1.,0.));+#17288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17289 = PCURVE('',#2814,#17290);+#17290 = DEFINITIONAL_REPRESENTATION('',(#17291),#17295);+#17291 = LINE('',#17292,#17293);+#17292 = CARTESIAN_POINT('',(0.,-0.1));+#17293 = VECTOR('',#17294,1.);+#17294 = DIRECTION('',(1.,0.));+#17295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17296 = ORIENTED_EDGE('',*,*,#17084,.T.);+#17297 = ORIENTED_EDGE('',*,*,#17298,.T.);+#17298 = EDGE_CURVE('',#17085,#17137,#17299,.T.);+#17299 = SURFACE_CURVE('',#17300,(#17304,#17311),.PCURVE_S1.);+#17300 = LINE('',#17301,#17302);+#17301 = CARTESIAN_POINT('',(-0.586694335938,-8.077799479167E-02,+ 1.5000001));+#17302 = VECTOR('',#17303,1.);+#17303 = DIRECTION('',(-1.,0.,0.));+#17304 = PCURVE('',#17100,#17305);+#17305 = DEFINITIONAL_REPRESENTATION('',(#17306),#17310);+#17306 = LINE('',#17307,#17308);+#17307 = CARTESIAN_POINT('',(4.5458984375E-02,0.));+#17308 = VECTOR('',#17309,1.);+#17309 = DIRECTION('',(-1.,0.));+#17310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17311 = PCURVE('',#2580,#17312);+#17312 = DEFINITIONAL_REPRESENTATION('',(#17313),#17317);+#17313 = LINE('',#17314,#17315);+#17314 = CARTESIAN_POINT('',(0.,-0.1));+#17315 = VECTOR('',#17316,1.);+#17316 = DIRECTION('',(1.,0.));+#17317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17318 = FACE_BOUND('',#17319,.F.);+#17319 = EDGE_LOOP('',(#17320,#17350,#17378,#17406,#17436,#17466,#17496)+ );+#17320 = ORIENTED_EDGE('',*,*,#17321,.T.);+#17321 = EDGE_CURVE('',#17322,#17324,#17326,.T.);+#17322 = VERTEX_POINT('',#17323);+#17323 = CARTESIAN_POINT('',(-0.560034179688,7.041015625E-02,1.5000001)+ );+#17324 = VERTEX_POINT('',#17325);+#17325 = CARTESIAN_POINT('',(-0.586694335938,7.041015625E-02,1.5000001)+ );+#17326 = SURFACE_CURVE('',#17327,(#17331,#17338),.PCURVE_S1.);+#17327 = LINE('',#17328,#17329);+#17328 = CARTESIAN_POINT('',(-0.560034179688,7.041015625E-02,1.5000001)+ );+#17329 = VECTOR('',#17330,1.);+#17330 = DIRECTION('',(-1.,0.,0.));+#17331 = PCURVE('',#17100,#17332);+#17332 = DEFINITIONAL_REPRESENTATION('',(#17333),#17337);+#17333 = LINE('',#17334,#17335);+#17334 = CARTESIAN_POINT('',(7.2119140625E-02,0.151188151042));+#17335 = VECTOR('',#17336,1.);+#17336 = DIRECTION('',(-1.,0.));+#17337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17338 = PCURVE('',#17339,#17344);+#17339 = PLANE('',#17340);+#17340 = AXIS2_PLACEMENT_3D('',#17341,#17342,#17343);+#17341 = CARTESIAN_POINT('',(-0.560034179688,7.041015625E-02,1.6000001)+ );+#17342 = DIRECTION('',(0.,1.,0.));+#17343 = DIRECTION('',(-1.,0.,0.));+#17344 = DEFINITIONAL_REPRESENTATION('',(#17345),#17349);+#17345 = LINE('',#17346,#17347);+#17346 = CARTESIAN_POINT('',(0.,-0.1));+#17347 = VECTOR('',#17348,1.);+#17348 = DIRECTION('',(1.,0.));+#17349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17350 = ORIENTED_EDGE('',*,*,#17351,.T.);+#17351 = EDGE_CURVE('',#17324,#17352,#17354,.T.);+#17352 = VERTEX_POINT('',#17353);+#17353 = CARTESIAN_POINT('',(-0.586694335938,6.494140625E-03,1.5000001)+ );+#17354 = SURFACE_CURVE('',#17355,(#17359,#17366),.PCURVE_S1.);+#17355 = LINE('',#17356,#17357);+#17356 = CARTESIAN_POINT('',(-0.586694335938,7.041015625E-02,1.5000001)+ );+#17357 = VECTOR('',#17358,1.);+#17358 = DIRECTION('',(0.,-1.,0.));+#17359 = PCURVE('',#17100,#17360);+#17360 = DEFINITIONAL_REPRESENTATION('',(#17361),#17365);+#17361 = LINE('',#17362,#17363);+#17362 = CARTESIAN_POINT('',(4.5458984375E-02,0.151188151042));+#17363 = VECTOR('',#17364,1.);+#17364 = DIRECTION('',(0.,-1.));+#17365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17366 = PCURVE('',#17367,#17372);+#17367 = PLANE('',#17368);+#17368 = AXIS2_PLACEMENT_3D('',#17369,#17370,#17371);+#17369 = CARTESIAN_POINT('',(-0.586694335938,7.041015625E-02,1.6000001)+ );+#17370 = DIRECTION('',(-1.,0.,0.));+#17371 = DIRECTION('',(0.,-1.,0.));+#17372 = DEFINITIONAL_REPRESENTATION('',(#17373),#17377);+#17373 = LINE('',#17374,#17375);+#17374 = CARTESIAN_POINT('',(0.,-0.1));+#17375 = VECTOR('',#17376,1.);+#17376 = DIRECTION('',(1.,0.));+#17377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17378 = ORIENTED_EDGE('',*,*,#17379,.T.);+#17379 = EDGE_CURVE('',#17352,#17380,#17382,.T.);+#17380 = VERTEX_POINT('',#17381);+#17381 = CARTESIAN_POINT('',(-0.560034179688,6.494140625E-03,1.5000001)+ );+#17382 = SURFACE_CURVE('',#17383,(#17387,#17394),.PCURVE_S1.);+#17383 = LINE('',#17384,#17385);+#17384 = CARTESIAN_POINT('',(-0.586694335938,6.494140625E-03,1.5000001)+ );+#17385 = VECTOR('',#17386,1.);+#17386 = DIRECTION('',(1.,0.,0.));+#17387 = PCURVE('',#17100,#17388);+#17388 = DEFINITIONAL_REPRESENTATION('',(#17389),#17393);+#17389 = LINE('',#17390,#17391);+#17390 = CARTESIAN_POINT('',(4.5458984375E-02,8.727213541667E-02));+#17391 = VECTOR('',#17392,1.);+#17392 = DIRECTION('',(1.,0.));+#17393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17394 = PCURVE('',#17395,#17400);+#17395 = PLANE('',#17396);+#17396 = AXIS2_PLACEMENT_3D('',#17397,#17398,#17399);+#17397 = CARTESIAN_POINT('',(-0.586694335938,6.494140625E-03,1.6000001)+ );+#17398 = DIRECTION('',(0.,-1.,0.));+#17399 = DIRECTION('',(1.,0.,0.));+#17400 = DEFINITIONAL_REPRESENTATION('',(#17401),#17405);+#17401 = LINE('',#17402,#17403);+#17402 = CARTESIAN_POINT('',(0.,-0.1));+#17403 = VECTOR('',#17404,1.);+#17404 = DIRECTION('',(1.,0.));+#17405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17406 = ORIENTED_EDGE('',*,*,#17407,.T.);+#17407 = EDGE_CURVE('',#17380,#17408,#17410,.T.);+#17408 = VERTEX_POINT('',#17409);+#17409 = CARTESIAN_POINT('',(-0.535139973958,1.492513020833E-02,+ 1.5000001));+#17410 = SURFACE_CURVE('',#17411,(#17415,#17422),.PCURVE_S1.);+#17411 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17412,#17413,#17414),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17412 = CARTESIAN_POINT('',(-0.560034179688,6.494140625E-03,1.5000001)+ );+#17413 = CARTESIAN_POINT('',(-0.544083658854,6.494140625E-03,1.5000001)+ );+#17414 = CARTESIAN_POINT('',(-0.535139973958,1.492513020833E-02,+ 1.5000001));+#17415 = PCURVE('',#17100,#17416);+#17416 = DEFINITIONAL_REPRESENTATION('',(#17417),#17421);+#17417 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17418,#17419,#17420),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17418 = CARTESIAN_POINT('',(7.2119140625E-02,8.727213541667E-02));+#17419 = CARTESIAN_POINT('',(8.806966145833E-02,8.727213541667E-02));+#17420 = CARTESIAN_POINT('',(9.701334635417E-02,9.5703125E-02));+#17421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17422 = PCURVE('',#17423,#17430);+#17423 = SURFACE_OF_LINEAR_EXTRUSION('',#17424,#17428);+#17424 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17425,#17426,#17427),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17425 = CARTESIAN_POINT('',(-0.560034179688,6.494140625E-03,1.6000001)+ );+#17426 = CARTESIAN_POINT('',(-0.544083658854,6.494140625E-03,1.6000001)+ );+#17427 = CARTESIAN_POINT('',(-0.535139973958,1.492513020833E-02,+ 1.6000001));+#17428 = VECTOR('',#17429,1.);+#17429 = DIRECTION('',(0.,0.,1.));+#17430 = DEFINITIONAL_REPRESENTATION('',(#17431),#17435);+#17431 = LINE('',#17432,#17433);+#17432 = CARTESIAN_POINT('',(0.,-0.1));+#17433 = VECTOR('',#17434,1.);+#17434 = DIRECTION('',(1.,0.));+#17435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17436 = ORIENTED_EDGE('',*,*,#17437,.T.);+#17437 = EDGE_CURVE('',#17408,#17438,#17440,.T.);+#17438 = VERTEX_POINT('',#17439);+#17439 = CARTESIAN_POINT('',(-0.526196289063,3.850911458333E-02,+ 1.5000001));+#17440 = SURFACE_CURVE('',#17441,(#17445,#17452),.PCURVE_S1.);+#17441 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17442,#17443,#17444),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17442 = CARTESIAN_POINT('',(-0.535139973958,1.492513020833E-02,+ 1.5000001));+#17443 = CARTESIAN_POINT('',(-0.526196289063,2.335611979167E-02,+ 1.5000001));+#17444 = CARTESIAN_POINT('',(-0.526196289063,3.850911458333E-02,+ 1.5000001));+#17445 = PCURVE('',#17100,#17446);+#17446 = DEFINITIONAL_REPRESENTATION('',(#17447),#17451);+#17447 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17448,#17449,#17450),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17448 = CARTESIAN_POINT('',(9.701334635417E-02,9.5703125E-02));+#17449 = CARTESIAN_POINT('',(0.10595703125,0.104134114583));+#17450 = CARTESIAN_POINT('',(0.10595703125,0.119287109375));+#17451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17452 = PCURVE('',#17453,#17460);+#17453 = SURFACE_OF_LINEAR_EXTRUSION('',#17454,#17458);+#17454 = B_SPLINE_CURVE_WITH_KNOTS('',2,(#17455,#17456,#17457),+ .UNSPECIFIED.,.F.,.F.,(3,3),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#17455 = CARTESIAN_POINT('',(-0.535139973958,1.492513020833E-02,+ 1.6000001));+#17456 = CARTESIAN_POINT('',(-0.526196289063,2.335611979167E-02,+ 1.6000001));+#17457 = CARTESIAN_POINT('',(-0.526196289063,3.850911458333E-02,+ 1.6000001));+#17458 = VECTOR('',#17459,1.);+#17459 = DIRECTION('',(0.,0.,1.));+#17460 = DEFINITIONAL_REPRESENTATION('',(#17461),#17465);+#17461 = LINE('',#17462,#17463);+#17462 = CARTESIAN_POINT('',(0.,-0.1));+#17463 = VECTOR('',#17464,1.);+#17464 = DIRECTION('',(1.,0.));+#17465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#17466 = ORIENTED_EDGE('',*,*,#17467,.T.);+#17467 = EDGE_CURVE('',#17438,#17468,#17470,.T.);