component
TPS2553DBVR-1
Public Made by Adomby adom
Texas Instruments AC-DC Controllers and Regulators, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input supply voltage, 2.5 V to 5.5 V (abs max 7 V). Source side of the internal high-side MOSFET. Bypass with a 0.1 \u00b5F or greater ceramic capacitor from IN to GND located as close to the IC as possible."+ "description": "Input supply voltage, 2.5 V to 5.5 V (abs max 7 V). Source side of the internal high-side MOSFET. Bypass with a 0.1 µF or greater ceramic capacitor from IN to GND located as close to the IC as possible." }, { "number": "2",@@ -50,19 +50,19 @@ "number": "4", "name": "FAULT", "type": "output",- "description": "Active-low open-drain fault indicator. Asserted (pulled low) during overcurrent, overtemperature, or reverse-voltage conditions. Requires an external pull-up resistor (e.g. 100 k\u03a9 to logic rail). Continuous sink current 0-25 mA."+ "description": "Active-low open-drain fault indicator. Asserted (pulled low) during overcurrent, overtemperature, or reverse-voltage conditions. Requires an external pull-up resistor (e.g. 100 kΩ to logic rail). Continuous sink current 0-25 mA." }, { "number": "5", "name": "ILIM", "type": "output",- "description": "Current-limit programming pin. Connect an external resistor R_ILIM from ILIM to GND to set the current-limit threshold from 75 mA to 1.7 A. Recommended 1% resistor range 15 k\u03a9 \u2264 R_ILIM \u2264 232 k\u03a9. ILIM source current 0-1 mA (abs max)."+ "description": "Current-limit programming pin. Connect an external resistor R_ILIM from ILIM to GND to set the current-limit threshold from 75 mA to 1.7 A. Recommended 1% resistor range 15 kΩ ≤ R_ILIM ≤ 232 kΩ. ILIM source current 0-1 mA (abs max)." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Power-switch output. Drain side of the internal high-side MOSFET. Delivers up to 1.5 A continuous to the downstream load (e.g. USB port). For USB applications bypass with \u2265120 \u00b5F per hub."+ "description": "Power-switch output. Drain side of the internal high-side MOSFET. Delivers up to 1.5 A continuous to the downstream load (e.g. USB port). For USB applications bypass with ≥120 µF per hub." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/tps2553dbvr-1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }