← Commit history
page.json+11−8@@ -38,7 +38,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input supply voltage, 4.5 V to 6.5 V; connect a 0.1 \u00b5F or greater ceramic capacitor from IN to GND as close to the IC as possible."+ "description": "Input supply voltage, 4.5 V to 6.5 V; connect a 0.1 µF or greater ceramic capacitor from IN to GND as close to the IC as possible." }, { "number": "2",@@ -56,7 +56,7 @@ "number": "4", "name": "CS", "type": "output",- "description": "Provide sink current proportional to output current, 75 \u00b5A/A; for cable compensation, connect to the feedback divider of the up-stream voltage regulator."+ "description": "Provide sink current proportional to output current, 75 µA/A; for cable compensation, connect to the feedback divider of the up-stream voltage regulator." }, { "number": "5",@@ -92,19 +92,19 @@ "number": "10", "name": "DP_IN", "type": "bidirectional",- "description": "D+ data line to downstream connector; maximum voltage \u00b15.7 V with respect to GND."+ "description": "D+ data line to downstream connector; maximum voltage ±5.7 V with respect to GND." }, { "number": "11", "name": "DM_IN", "type": "bidirectional",- "description": "D- data line to downstream connector; maximum voltage \u00b15.7 V with respect to GND."+ "description": "D- data line to downstream connector; maximum voltage ±5.7 V with respect to GND." }, { "number": "12", "name": "OUT", "type": "power_out",- "description": "Power-switch output; 47 m\u03a9 typical on-resistance MOSFET with 3 A maximum continuous current capability."+ "description": "Power-switch output; 47 mΩ typical on-resistance MOSFET with 3 A maximum continuous current capability." }, { "number": "13",@@ -122,13 +122,13 @@ "number": "15", "name": "ILIM_LO", "type": "input",- "description": "Connect external resistor to ground to set the low current-limit threshold and the load-detection current threshold; 15.4 k\u03a9 to 1000 k\u03a9 recommended."+ "description": "Connect external resistor to ground to set the low current-limit threshold and the load-detection current threshold; 15.4 kΩ to 1000 kΩ recommended." }, { "number": "16", "name": "ILIM_HI", "type": "input",- "description": "Connect external resistor to ground to set the high current-limit threshold; 15.4 k\u03a9 to 1000 k\u03a9 recommended."+ "description": "Connect external resistor to ground to set the high current-limit threshold; 15.4 kΩ to 1000 kΩ recommended." }, { "number": "17",@@ -215,5 +215,8 @@ "docs/tps2549rter-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }