component
TPS25221DBVR
Public Made by Adomby adom
Texas Instruments Supervisor and Reset ICs, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input voltage and power switch drain. Operating range 2.5 V to 5.5 V. Connect a 0.1 \u00b5F or greater ceramic bypass capacitor from IN to GND close to the IC."+ "description": "Input voltage and power switch drain. Operating range 2.5 V to 5.5 V. Connect a 0.1 µF or greater ceramic bypass capacitor from IN to GND close to the IC." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "EN", "type": "input",- "description": "Active-high enable input. Logic high turns the power switch on; logic low turns it off. VIH \u2265 1.7 V, VIL \u2264 0.66 V; absolute range 0 to 5.5 V."+ "description": "Active-high enable input. Logic high turns the power switch on; logic low turns it off. VIH ≥ 1.7 V, VIL ≤ 0.66 V; absolute range 0 to 5.5 V." }, { "number": "4", "name": "FAULT", "type": "output",- "description": "Active-low open-drain fault flag. Asserted low during over-current or over-temperature conditions after the ~8 ms deglitch. Requires an external pull-up (typ. 20 k\u03a9). Max sink current 25 mA."+ "description": "Active-low open-drain fault flag. Asserted low during over-current or over-temperature conditions after the ~8 ms deglitch. Requires an external pull-up (typ. 20 kΩ). Max sink current 25 mA." }, { "number": "5", "name": "ILIM", "type": "output",- "description": "Current-limit programming pin. External resistor to GND (20 k\u03a9 to 210 k\u03a9) sets the current-limit threshold from ~2.72 A down to ~275 mA. ILIM source current limited to 1 mA max."+ "description": "Current-limit programming pin. External resistor to GND (20 kΩ to 210 kΩ) sets the current-limit threshold from ~2.72 A down to ~275 mA. ILIM source current limited to 1 mA max." }, { "number": "6", "name": "OUT", "type": "power_out",- "description": "Power switch output; connect to load. Delivers up to 2 A continuous. USB applications require \u2265120 \u00b5F bulk capacitance on downstream ports."+ "description": "Power switch output; connect to load. Delivers up to 2 A continuous. USB applications require ≥120 µF bulk capacitance on downstream ports." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/tps25221dbvr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }