TPS24740RGER

@@ -0,0 +1,303 @@+{+  "slug": "tps24740rger",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Supervisor And Reset ICs, VQFN-24-EP(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps24740rger",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps24740rger.kicad_sym",+    "tps24740rger.kicad_mod",+    "tps24740rger.glb",+    "tps24740rger.step",+    "tps24740rger.lbr",+    "docs/hero.png",+    "docs/tps24740rger-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "tps24740rger-hero.glb",+    "tps24740rger-hero.overlay.json"+  ],+  "component": {+    "mpn": "TPS24740RGER",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Power Management (PMIC)",+    "subcategory": "Supervisor And Reset ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps24741",+    "parts": {+      "symbol": "tps24740rger.kicad_sym",+      "footprint": "tps24740rger.kicad_mod",+      "model_3d": "tps24740rger-hero.glb",+      "model_3d_plain": "tps24740rger.glb",+      "model_3d_step": "tps24740rger-etched.step",+      "model_3d_step_plain": "tps24740rger.step",+      "lbr": "tps24740rger.lbr"+    },+    "distributor_links": {+      "lcsc": "C2655465",+      "digikey": "296-51876-2-ND",+      "mouser": "595-TPS24740RGER"+    },+    "distributor_check": {+      "checked_at": "2026-10-08T15:48:54Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-51876-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TPS24740RGER",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "CP",+        "type": "bidirectional",+        "description": "Connect a storage capacitor from CP to A for fast turn-on of the blocking gate; recommended external capacitance is 1 nF to 1000 nF."+      },+      {+        "number": "2",+        "name": "ENHS",+        "type": "input",+        "description": "Active-high enable input of the hot-swap function, a logic input that connects to a resistor divider and is rated 0 V to 18 V."+      },+      {+        "number": "3",+        "name": "ENOR",+        "type": "input",+        "description": "Active-high enable input of the ORing function, a logic input that connects to a resistor divider and is rated 0 V to 18 V."+      },+      {+        "number": "4",+        "name": "FLTb",+        "type": "output",+        "description": "Active-low open-drain output indicating various faults, with recommended sink current of 0 to 2 mA and input voltage of 0 V to 18 V."+      },+      {+        "number": "5",+        "name": "PGHS",+        "type": "output",+        "description": "Active-high open-drain power-good indicator, with recommended sink current of 0 to 2 mA."+      },+      {+        "number": "6",+        "name": "STAT",+        "type": "output",+        "description": "Output that is high when BGATE is ON, with recommended sink current of 0 to 2 mA."+      },+      {+        "number": "7",+        "name": "TINR",+        "type": "bidirectional",+        "description": "Inrush timer that runs during start-up when the part is in current limit or power limit, with a recommended external capacitance of 1 nF."+      },+      {+        "number": "8",+        "name": "TFLT",+        "type": "bidirectional",+        "description": "Fault timer that runs when the device goes from regular operation to an over-current condition, with a recommended external capacitance of 1 nF."+      },+      {+        "number": "9",+        "name": "OV",+        "type": "input",+        "description": "Overvoltage comparator input that connects to a resistor divider; HGATE and BGATE are pulled low when OV exceeds the threshold, and it should be connected to ground when not used."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference pin for the device."+      },+      {+        "number": "11",+        "name": "PLIM",+        "type": "input",+        "description": "Power-limiting programming pin where a resistor from this pin to GND sets the maximum power dissipation of the hot-swap FET, with a recommended resistance of 4.99 kΩ to 500 kΩ."+      },+      {+        "number": "12",+        "name": "IMON",+        "type": "bidirectional",+        "description": "Analog current monitor and load current limit program point that is connected to RIMON, which is tied to ground, with a recommended resistance of 1 kΩ to 6 kΩ and a maximum capacitance of 30 pF."+      },+      {+        "number": "13",+        "name": "IMONBUF",+        "type": "output",+        "description": "Voltage output proportional to the load current over 0 V to 3.0 V, with a maximum source current of 5 mA and a maximum capacitance of 100 pF."+      },+      {+        "number": "14",+        "name": "VDD",+        "type": "power_in",+        "description": "Power supply pin with a recommended operating range of 2.5 V to 18 V and an absolute maximum of 30 V."+      },+      {+        "number": "15",+        "name": "SET",+        "type": "input",+        "description": "Current-limit programming set pin for hot-swap, connected from the positive terminal of the sensing resistor, with a recommended resistance of 10 Ω to 400 Ω; voltage must not be applied to this pin."+      },+      {+        "number": "16",+        "name": "FSTP",+        "type": "input",+        "description": "Fast-trip programming set pin for hot-swap, connected from the positive terminal of the sensing resistor, with a recommended resistance of 10 Ω to 4000 Ω and a recommended operating range of 2.5 V to 18 V."+      },+      {+        "number": "17",+        "name": "SENM",+        "type": "input",+        "description": "Current-sensing input connected directly to the negative terminal of the sensing resistor, with a recommended operating range of 2.5 V to 18 V."+      },+      {+        "number": "18",+        "name": "HGATE",+        "type": "output",+        "description": "Gate driver output for the external hot-swap MOSFET, with a maximum HGATE-to-OUTH voltage of 15 V and external capacitance of up to 1 µF in series with at least 1 kΩ."+      },+      {+        "number": "19",+        "name": "OUTH",+        "type": "input",+        "description": "Output voltage sense input for monitoring hot-swap MOSFET power, connected to the source terminal of the hot-swap N-channel MOSFET, with a recommended input voltage of 0 V to 18 V."+      },+      {+        "number": "20",+        "name": "C",+        "type": "input",+        "description": "Voltage sense input connected to the OR MOSFET body-diode cathode (drain in the typical configuration), with a recommended range of 0.7 V to 18 V; it also supplies the ORing block under certain biasing conditions."+      },+      {+        "number": "21",+        "name": "RVSNP",+        "type": "input",+        "description": "Positive input of the reverse-voltage comparator, where a resistor from RVSNP to C sets the blocking-FET reverse-voltage trip point, with a recommended resistance of 10 Ω to 1000 Ω."+      },+      {+        "number": "22",+        "name": "BGATE",+        "type": "output",+        "description": "Gate output that controls the external OR MOSFET to emulate a low forward-voltage diode, with a maximum voltage of 12 V to pin A and up to 1 µF of external capacitance in series with at least 1 kΩ."+      },+      {+        "number": "23",+        "name": "A",+        "type": "input",+        "description": "Voltage sense input connected to the OR MOSFET body-diode anode (source in the typical configuration), with a recommended range of 0.7 V to 18 V; it also supplies the ORing block under certain biasing conditions."+      },+      {+        "number": "24",+        "name": "RVSNM",+        "type": "input",+        "description": "Negative input of the reverse-voltage comparator, with a recommended range of 0.7 V to 18 V."+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The datasheet's pin table lists pins A and C as type I/P (sense input that also supplies the ORing b; The 24-pin RGE package has an exposed thermal pad. The datasheet's pin table does not assign it a pi; Pin descriptions include recommended-operating limits drawn from the Recommended Operating Condition",+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 9,+        "cost_usd": 0.0742,+        "at": "2026-10-08T15:48:31"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps24741",+        "pages": 62,+        "sha256": "ec6cf2628a5bace6",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "tps24740rger.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4,+          4,+          0.77+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+        "checked": "2026-10-08",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps24740rger-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          4,+          4,+          0.77+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "2b5dd7fc78667810eb313111d797650504aeca932558f64504f5aac8bcd2f38b",+        "checked": "2026-10-08",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file