← Commit history
README.mdadded+58@@ -0,0 +1,58 @@+# TPS2373-4RGWR++**Texas Instruments** · Ethernet Transceivers · VQFN-20-EP(5x5)++TPS2373-4RGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VDD | power_in | Positive PoE input supply rail, bypass with 0.1µF capacitor to VSS. |+| 2 | DEN | bidirectional | Detection and enable input; connect 24.9kΩ resistor to VDD for PoE detection or pull to VSS during operation to disable pass-through MOSFET. |+| 3 | CLSA | output | Open-drain classification current output A; connect resistor to VSS to set first classification current per IEEE 802.3bt. |+| 4 | VSS | power_in | Negative supply rail connection from PoE source. |+| 5 | VSS | power_in | Negative supply rail connection from PoE source. |+| 6 | CLSB | output | Open-drain classification current output B; connect resistor to VSS to set second classification current per IEEE 802.3bt. |+| 7 | REF | output | Internal 1.5V voltage reference; connect 49.9kΩ ±1% resistor to VSS. |+| 8 | AMPS_CTL | output | Automatic MPS control output; connect resistor to VSS to set MPS current amplitude or leave open to disable MPS function. |+| 9 | MPS_DUTY | input | MPS duty cycle selection input referenced to VSS; resistor to VSS selects duty cycle as 5.4% (open), 8.1% (60.4kΩ), or 12.5% (shorted). |+| 10 | APD | input | Auxiliary Power Detect input; voltage 1.65V above RTN disables pass-through MOSFET, connect to RTN if not used. |+| 11 | RTN | power_in | Drain of PoE pass-through MOSFET; surge current limit approximately 200mA (TPS2373-3) or 335mA (TPS2373-4), normal current limit 1.85A or 2.2A. |+| 12 | RTN | power_in | Drain of PoE pass-through MOSFET; surge current limit approximately 200mA (TPS2373-3) or 335mA (TPS2373-4), normal current limit 1.85A or 2.2A. |+| 13 | PG | output | Power Good; open-drain active high output referenced to RTN, low during surge phase and open when surge complete to enable downstream converter. |+| 14 | VC_OUT | output | Low-voltage auxiliary supply output for PWM controller; bypass with 1µF capacitor to RTN, startup current source capability up to 30mA at VDD ≥ 28V. |+| 15 | VC_IN | input | Auxiliary bias voltage input (typically 8V to 15V referenced to RTN); bypass with 0.1µF capacitor to RTN, connects internally to VC_OUT after converter startup. |+| 16 | UVLO_SEL | input | UVLO selection input referenced to RTN; keep open for PWM with UVLO above 7.25V, pull low for 3.9V threshold selection. |+| 17 | TPL | output | PSE Allocated Power type L output (binary encoded); open-drain active high referenced to RTN, becomes high-impedance if auxiliary adapter detected. |+| 18 | TPH | output | PSE Allocated Power type H output (binary encoded); open-drain active high referenced to RTN, indicates PSE power class allocation. |+| 19 | BT | output | IEEE802.3bt detection indicator; open-drain active low referenced to RTN, low indicates IEEE802.3bt PSE Type 3 or 4 detected. |+| 20 | NC | unconnected | No Connect pin; leave open. |+| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-20-EP(5x5) |+| Category | Interface |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `TPS2373-4RGWR`+- Footprint: `Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm`+- 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)+- 3D model files: `tps2373-4rgwr-etched.step` / `tps2373-4rgwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps2373-4rgwr.step` / `tps2373-4rgwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2373) (46 pp, sha256 `215423c8efd715bb`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps2373-4rgwr-datasheet.pdf)
page.jsonadded+222@@ -0,0 +1,222 @@+{+ "slug": "tps2373-4rgwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Ethernet Transceivers, VQFN-20-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "tps2373-4rgwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps2373-4rgwr.kicad_sym",+ "tps2373-4rgwr.kicad_mod",+ "tps2373-4rgwr.glb",+ "tps2373-4rgwr.step",+ "tps2373-4rgwr.lbr",+ "docs/hero.png",+ "docs/tps2373-4rgwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS2373-4RGWR",+ "manufacturer": "Texas Instruments",+ "package": "VQFN-20-EP(5x5)",+ "pin_count": 21,+ "category": "Interface",+ "subcategory": "Ethernet Transceivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps2373",+ "parts": {+ "symbol": "tps2373-4rgwr.kicad_sym",+ "footprint": "tps2373-4rgwr.kicad_mod",+ "model_3d": "tps2373-4rgwr-etched.glb",+ "model_3d_plain": "tps2373-4rgwr.glb",+ "model_3d_step": "tps2373-4rgwr-etched.step",+ "model_3d_step_plain": "tps2373-4rgwr.step",+ "lbr": "tps2373-4rgwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C470963"+ },+ "pins": [+ {+ "number": "1",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive PoE input supply rail, bypass with 0.1µF capacitor to VSS."+ },+ {+ "number": "2",+ "name": "DEN",+ "type": "bidirectional",+ "description": "Detection and enable input; connect 24.9kΩ resistor to VDD for PoE detection or pull to VSS during operation to disable pass-through MOSFET."+ },+ {+ "number": "3",+ "name": "CLSA",+ "type": "output",+ "description": "Open-drain classification current output A; connect resistor to VSS to set first classification current per IEEE 802.3bt."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Negative supply rail connection from PoE source."+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "Negative supply rail connection from PoE source."+ },+ {+ "number": "6",+ "name": "CLSB",+ "type": "output",+ "description": "Open-drain classification current output B; connect resistor to VSS to set second classification current per IEEE 802.3bt."+ },+ {+ "number": "7",+ "name": "REF",+ "type": "output",+ "description": "Internal 1.5V voltage reference; connect 49.9kΩ ±1% resistor to VSS."+ },+ {+ "number": "8",+ "name": "AMPS_CTL",+ "type": "output",+ "description": "Automatic MPS control output; connect resistor to VSS to set MPS current amplitude or leave open to disable MPS function."+ },+ {+ "number": "9",+ "name": "MPS_DUTY",+ "type": "input",+ "description": "MPS duty cycle selection input referenced to VSS; resistor to VSS selects duty cycle as 5.4% (open), 8.1% (60.4kΩ), or 12.5% (shorted)."+ },+ {+ "number": "10",+ "name": "APD",+ "type": "input",+ "description": "Auxiliary Power Detect input; voltage 1.65V above RTN disables pass-through MOSFET, connect to RTN if not used."+ },+ {+ "number": "11",+ "name": "RTN",+ "type": "power_in",+ "description": "Drain of PoE pass-through MOSFET; surge current limit approximately 200mA (TPS2373-3) or 335mA (TPS2373-4), normal current limit 1.85A or 2.2A."+ },+ {+ "number": "12",+ "name": "RTN",+ "type": "power_in",+ "description": "Drain of PoE pass-through MOSFET; surge current limit approximately 200mA (TPS2373-3) or 335mA (TPS2373-4), normal current limit 1.85A or 2.2A."+ },+ {+ "number": "13",+ "name": "PG",+ "type": "output",+ "description": "Power Good; open-drain active high output referenced to RTN, low during surge phase and open when surge complete to enable downstream converter."+ },+ {+ "number": "14",+ "name": "VC_OUT",+ "type": "output",+ "description": "Low-voltage auxiliary supply output for PWM controller; bypass with 1µF capacitor to RTN, startup current source capability up to 30mA at VDD ≥ 28V."+ },+ {+ "number": "15",+ "name": "VC_IN",+ "type": "input",+ "description": "Auxiliary bias voltage input (typically 8V to 15V referenced to RTN); bypass with 0.1µF capacitor to RTN, connects internally to VC_OUT after converter startup."+ },+ {+ "number": "16",+ "name": "UVLO_SEL",+ "type": "input",+ "description": "UVLO selection input referenced to RTN; keep open for PWM with UVLO above 7.25V, pull low for 3.9V threshold selection."+ },+ {+ "number": "17",+ "name": "TPL",+ "type": "output",+ "description": "PSE Allocated Power type L output (binary encoded); open-drain active high referenced to RTN, becomes high-impedance if auxiliary adapter detected."+ },+ {+ "number": "18",+ "name": "TPH",+ "type": "output",+ "description": "PSE Allocated Power type H output (binary encoded); open-drain active high referenced to RTN, indicates PSE power class allocation."+ },+ {+ "number": "19",+ "name": "BT",+ "type": "output",+ "description": "IEEE802.3bt detection indicator; open-drain active low referenced to RTN, low indicates IEEE802.3bt PSE Type 3 or 4 detected."+ },+ {+ "number": "20",+ "name": "NC",+ "type": "unconnected",+ "description": "No Connect pin; leave open."+ },+ {+ "number": "21",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 21 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 46,+ "cost_usd": 0.5977,+ "at": "2026-09-22T11:21:59"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps2373",+ "pages": 46,+ "sha256": "215423c8efd715bb",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 21,+ "described": 21,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}