← Commit history

Initial commit: component/tps22990dmlr

Ray ·a1f93f26b1 ·
2 files changed +210
README.mdadded+48
@@ -0,0 +1,48 @@+# TPS22990DMLR++**Texas Instruments** · Power Distribution Switches · WSON-10-EP(2x3)++TPS22990DMLR from Texas Instruments, in a WSON-10-EP(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CT | output | Capacitor-to-GND pin used to set the VOUT controlled slew rate (rise time); voltage on this pin can reach 15 V, so a capacitor rated ≥25 V is recommended; without a capacitor, rise time is at its fastest. |+| 2 | NC | unconnected | Not internally connected; no electrical function. |+| 3 | VIN | power_in | Switch input supply; operating range 0.6 V to VBIAS; bypass to GND with a ceramic capacitor (typ. 1 µF) close to the pin. |+| 4 | VBIAS | power_in | Bias voltage input that powers the device; operating range 2.5 V to 5.5 V. |+| 5 | ON | input | Active-high switch control input that enables the load switch when driven high; must not be left floating (tie high or low); VIH,min = 1.05-1.2 V, VIL,max = 0.5 V. |+| 6 | GND | power_in | Device ground reference. |+| 7 | PG | output | Power-good indicator; active-high, open-drain output that requires an external pull-up (e.g., to VOUT or another supply); indicates the pass FET is fully on and output is full-load ready; tie to GND if unused. |+| 8 | VOUT | power_out | Switch output; ganged internally with pins 9 and 10 to carry the full switch current up to 10 A continuous. |+| 9 | VOUT | power_out | Switch output; ganged internally with pins 8 and 10 to carry the full switch current up to 10 A continuous. |+| 10 | VOUT | power_out | Switch output; ganged internally with pins 8 and 9 to carry the full switch current up to 10 A continuous. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-10-EP(2x3) |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TPS22990DMLR`+- Footprint: `Package_SON:WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm`+- 3D model: WSON-10-EP(2x3) (KiCad packages3D, STEP)+- 3D model files: `tps22990dmlr-etched.step` / `tps22990dmlr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps22990dmlr.step` / `tps22990dmlr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps22990) (34 pp, sha256 `7f62e2e91fab880c`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps22990dmlr-datasheet.pdf)
page.jsonadded+162
@@ -0,0 +1,162 @@+{+  "slug": "tps22990dmlr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Power Distribution Switches, WSON-10-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps22990dmlr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps22990dmlr.kicad_sym",+    "tps22990dmlr.kicad_mod",+    "tps22990dmlr.glb",+    "tps22990dmlr.step",+    "tps22990dmlr.lbr",+    "docs/hero.png",+    "docs/tps22990dmlr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS22990DMLR",+    "manufacturer": "Texas Instruments",+    "package": "WSON-10-EP(2x3)",+    "pin_count": 11,+    "category": "Power Management (PMIC)",+    "subcategory": "Power Distribution Switches",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps22990",+    "parts": {+      "symbol": "tps22990dmlr.kicad_sym",+      "footprint": "tps22990dmlr.kicad_mod",+      "model_3d": "tps22990dmlr-etched.glb",+      "model_3d_plain": "tps22990dmlr.glb",+      "model_3d_step": "tps22990dmlr-etched.step",+      "model_3d_step_plain": "tps22990dmlr.step",+      "lbr": "tps22990dmlr.lbr"+    },+    "distributor_links": {+      "lcsc": "C962990"+    },+    "pins": [+      {+        "number": "1",+        "name": "CT",+        "type": "output",+        "description": "Capacitor-to-GND pin used to set the VOUT controlled slew rate (rise time); voltage on this pin can reach 15 V, so a capacitor rated ≥25 V is recommended; without a capacitor, rise time is at its fastest."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "Not internally connected; no electrical function."+      },+      {+        "number": "3",+        "name": "VIN",+        "type": "power_in",+        "description": "Switch input supply; operating range 0.6 V to VBIAS; bypass to GND with a ceramic capacitor (typ. 1 µF) close to the pin."+      },+      {+        "number": "4",+        "name": "VBIAS",+        "type": "power_in",+        "description": "Bias voltage input that powers the device; operating range 2.5 V to 5.5 V."+      },+      {+        "number": "5",+        "name": "ON",+        "type": "input",+        "description": "Active-high switch control input that enables the load switch when driven high; must not be left floating (tie high or low); VIH,min = 1.05-1.2 V, VIL,max = 0.5 V."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference."+      },+      {+        "number": "7",+        "name": "PG",+        "type": "output",+        "description": "Power-good indicator; active-high, open-drain output that requires an external pull-up (e.g., to VOUT or another supply); indicates the pass FET is fully on and output is full-load ready; tie to GND if unused."+      },+      {+        "number": "8",+        "name": "VOUT",+        "type": "power_out",+        "description": "Switch output; ganged internally with pins 9 and 10 to carry the full switch current up to 10 A continuous."+      },+      {+        "number": "9",+        "name": "VOUT",+        "type": "power_out",+        "description": "Switch output; ganged internally with pins 8 and 10 to carry the full switch current up to 10 A continuous."+      },+      {+        "number": "10",+        "name": "VOUT",+        "type": "power_out",+        "description": "Switch output; ganged internally with pins 8 and 9 to carry the full switch current up to 10 A continuous."+      },+      {+        "number": "11",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 8 name and description inferred from context (layout diagrams, typical load switch design, and t",+          "exposed pad 11 added from the footprint"+        ],+        "pages_sent": 34,+        "cost_usd": 0.413,+        "at": "2026-09-24T00:31:18"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps22990",+        "pages": 34,+        "sha256": "7f62e2e91fab880c",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 11,+        "described": 11,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file