component
TPS2211AIDBR
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, SSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TPS2211AIDBR++**Texas Instruments** · Power Distribution Switches · SSOP-16++TPS2211AIDBR from Texas Instruments, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VCCD0 | input | Logic input that controls the voltage of AVCC according to the datasheet control-logic table. |+| 2 | VCCD1 | input | Logic input that controls the voltage of AVCC according to the datasheet control-logic table. |+| 3 | 3.3V | power_in | 3.3-V VCC input for card power and/or chip power if 5 V is not present, with a recommended input range of 0 to 5.25 V. |+| 4 | 3.3V | power_in | 3.3-V VCC input for card power and/or chip power if 5 V is not present, with a recommended input range of 0 to 5.25 V. |+| 5 | 5V | power_in | 5-V VCC input for card power and/or chip power, with a recommended input range of 0 to 5.25 V. |+| 6 | 5V | power_in | 5-V VCC input for card power and/or chip power, with a recommended input range of 0 to 5.25 V. |+| 7 | GND | power_in | Ground. |+| 8 | OC | output | Logic-level overcurrent reporting output that goes low when an overcurrent condition exists. |+| 9 | 12V | power_in | 12-V Vpp input card power, with a recommended input range of 0 to 13.5 V and an absolute maximum of 14 V. |+| 10 | AVPP | power_out | Switched output that delivers 0 V, 3.3 V, 5 V, 12 V, or high impedance to the card, with a recommended maximum output current of 150 mA. |+| 11 | AVCC | power_out | Switched output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card; the three AVCC pins must be tied together externally to minimize power loss, with a recommended maximum output current of 1 A. |+| 12 | AVCC | power_out | Switched output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card; the three AVCC pins must be tied together externally to minimize power loss, with a recommended maximum output current of 1 A. |+| 13 | AVCC | power_out | Switched output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card; the three AVCC pins must be tied together externally to minimize power loss, with a recommended maximum output current of 1 A. |+| 14 | VPPD1 | input | Logic input that controls the voltage of AVPP according to the datasheet control-logic table. |+| 15 | VPPD0 | input | Logic input that controls the voltage of AVPP according to the datasheet control-logic table. |+| 16 | SHDN | input | Logic input that shuts down the device and sets all power outputs to the high-impedance state. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-16 |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TPS2211AIDBR`+- Footprint: `Package_SO:SSOP-16_5.3x6.2mm_P0.65mm`+- 3D model: SSOP-16 (KiCad packages3D, STEP)+- 3D model files: `tps2211aidbr-etched.step` / `tps2211aidbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps2211aidbr.step` / `tps2211aidbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2211a) (33 pp, sha256 `9792d13803598229`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps2211aidbr-datasheet.pdf)
page.jsonadded+247@@ -0,0 +1,247 @@+{+ "slug": "tps2211aidbr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Power Distribution Switches, SSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps2211aidbr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps2211aidbr.kicad_sym",+ "tps2211aidbr.kicad_mod",+ "tps2211aidbr.glb",+ "tps2211aidbr.step",+ "tps2211aidbr.lbr",+ "docs/hero.png",+ "docs/tps2211aidbr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps2211aidbr-hero.glb",+ "tps2211aidbr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS2211AIDBR",+ "manufacturer": "Texas Instruments",+ "package": "SSOP-16",+ "pin_count": 16,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Distribution Switches",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps2211a",+ "parts": {+ "symbol": "tps2211aidbr.kicad_sym",+ "footprint": "tps2211aidbr.kicad_mod",+ "model_3d": "tps2211aidbr-hero.glb",+ "model_3d_plain": "tps2211aidbr.glb",+ "model_3d_step": "tps2211aidbr-etched.step",+ "model_3d_step_plain": "tps2211aidbr.step",+ "lbr": "tps2211aidbr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2865672",+ "digikey": "296-13827-2-ND",+ "mouser": "595-TPS2211AIDBR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T16:35:49Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-13827-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TPS2211AIDBR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VCCD0",+ "type": "input",+ "description": "Logic input that controls the voltage of AVCC according to the datasheet control-logic table."+ },+ {+ "number": "2",+ "name": "VCCD1",+ "type": "input",+ "description": "Logic input that controls the voltage of AVCC according to the datasheet control-logic table."+ },+ {+ "number": "3",+ "name": "3.3V",+ "type": "power_in",+ "description": "3.3-V VCC input for card power and/or chip power if 5 V is not present, with a recommended input range of 0 to 5.25 V."+ },+ {+ "number": "4",+ "name": "3.3V",+ "type": "power_in",+ "description": "3.3-V VCC input for card power and/or chip power if 5 V is not present, with a recommended input range of 0 to 5.25 V."+ },+ {+ "number": "5",+ "name": "5V",+ "type": "power_in",+ "description": "5-V VCC input for card power and/or chip power, with a recommended input range of 0 to 5.25 V."+ },+ {+ "number": "6",+ "name": "5V",+ "type": "power_in",+ "description": "5-V VCC input for card power and/or chip power, with a recommended input range of 0 to 5.25 V."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "8",+ "name": "OC",+ "type": "output",+ "description": "Logic-level overcurrent reporting output that goes low when an overcurrent condition exists."+ },+ {+ "number": "9",+ "name": "12V",+ "type": "power_in",+ "description": "12-V Vpp input card power, with a recommended input range of 0 to 13.5 V and an absolute maximum of 14 V."+ },+ {+ "number": "10",+ "name": "AVPP",+ "type": "power_out",+ "description": "Switched output that delivers 0 V, 3.3 V, 5 V, 12 V, or high impedance to the card, with a recommended maximum output current of 150 mA."+ },+ {+ "number": "11",+ "name": "AVCC",+ "type": "power_out",+ "description": "Switched output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card; the three AVCC pins must be tied together externally to minimize power loss, with a recommended maximum output current of 1 A."+ },+ {+ "number": "12",+ "name": "AVCC",+ "type": "power_out",+ "description": "Switched output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card; the three AVCC pins must be tied together externally to minimize power loss, with a recommended maximum output current of 1 A."+ },+ {+ "number": "13",+ "name": "AVCC",+ "type": "power_out",+ "description": "Switched output that delivers 0 V, 3.3 V, 5 V, or high impedance to the card; the three AVCC pins must be tied together externally to minimize power loss, with a recommended maximum output current of 1 A."+ },+ {+ "number": "14",+ "name": "VPPD1",+ "type": "input",+ "description": "Logic input that controls the voltage of AVPP according to the datasheet control-logic table."+ },+ {+ "number": "15",+ "name": "VPPD0",+ "type": "input",+ "description": "Logic input that controls the voltage of AVPP according to the datasheet control-logic table."+ },+ {+ "number": "16",+ "name": "SHDN",+ "type": "input",+ "description": "Logic input that shuts down the device and sets all power outputs to the high-impedance state."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The DB (16-pin SSOP) pinout is taken from the DB column of the Terminal Functions table (page 3) and; Pins 3 and 4 are both printed as '3.3V' and pins 5 and 6 as '5V'; they are kept as printed. Pin 7 is; The datasheet gives I/O direction only (I, O, Ground). Types were mapped to KiCad ERC classes by fun"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0641,+ "at": "2026-10-08T16:35:31"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps2211a",+ "pages": 33,+ "sha256": "9792d13803598229",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps2211aidbr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps2211aidbr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 7.8,+ 6.2,+ 2.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6722bfd6960a128503a7d862ac99b4248abc81a3300320424ee2297523cb2571",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}