component
TPS2062QDGNRQ1
Public Made by Adomby adom
Texas Instruments Power Distribution Switches, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+46@@ -0,0 +1,46 @@+# TPS2062QDGNRQ1++**Texas Instruments** · Power Distribution Switches · MSOP-8-EP++TPS2062QDGNRQ1 from Texas Instruments, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground reference for the device; all device voltages are specified with respect to GND, and the exposed PowerPAD must be connected to this pin. |+| 2 | IN | power_in | Input voltage to the power switches, recommended 2.7 V to 5.5 V with an absolute maximum range of -0.3 V to 6 V. |+| 3 | EN1 | input | Enable input for the IN-OUT1 power switch; a logic low turns the switch on, with a recommended input range of 0 V to 5.5 V. |+| 4 | EN2 | input | Enable input for the IN-OUT2 power switch; a logic low turns the switch on, with a recommended input range of 0 V to 5.5 V. |+| 5 | OC2 | output | Open-drain overcurrent output for IN-OUT2, asserted active low after a 10-ms deglitch on overcurrent or overtemperature, with output low voltage of 0.4 V max at 5 mA. |+| 6 | OUT2 | output | Power-switch output for IN-OUT2, rated for a continuous output current of 0 to 1 A. |+| 7 | OUT1 | output | Power-switch output for IN-OUT1, rated for a continuous output current of 0 to 1 A. |+| 8 | OC1 | output | Open-drain overcurrent output for IN-OUT1, asserted active low after a 10-ms deglitch on overcurrent or overtemperature, with output low voltage of 0.4 V max at 5 mA. |+| 9 | PowerPAD | power_in | Exposed thermal pad internally connected to GND, used to heat-sink the part to the board; it should be connected to the GND pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | MSOP-8-EP |+| Category | Power Management (PMIC) |+| Pins | 9 |++## CAD (KiCad official)++- Symbol: `TPS2062QDGNRQ1`+- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`+- 3D model: MSOP-8-EP (KiCad packages3D, STEP)+- 3D model files: `tps2062qdgnrq1-etched.step` / `tps2062qdgnrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps2062qdgnrq1.step` / `tps2062qdgnrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps2062-q1) (28 pp, sha256 `15b91d2401ea94b3`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps2062qdgnrq1-datasheet.pdf)
page.jsonadded+206@@ -0,0 +1,206 @@+{+ "slug": "tps2062qdgnrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Power Distribution Switches, MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps2062qdgnrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps2062qdgnrq1.kicad_sym",+ "tps2062qdgnrq1.kicad_mod",+ "tps2062qdgnrq1.glb",+ "tps2062qdgnrq1.step",+ "tps2062qdgnrq1.lbr",+ "docs/hero.png",+ "docs/tps2062qdgnrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tps2062qdgnrq1-hero.glb",+ "tps2062qdgnrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPS2062QDGNRQ1",+ "manufacturer": "Texas Instruments",+ "package": "MSOP-8-EP",+ "pin_count": 9,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Distribution Switches",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tps2062-q1",+ "parts": {+ "symbol": "tps2062qdgnrq1.kicad_sym",+ "footprint": "tps2062qdgnrq1.kicad_mod",+ "model_3d": "tps2062qdgnrq1-hero.glb",+ "model_3d_plain": "tps2062qdgnrq1.glb",+ "model_3d_step": "tps2062qdgnrq1-etched.step",+ "model_3d_step_plain": "tps2062qdgnrq1.step",+ "lbr": "tps2062qdgnrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C2150423",+ "digikey": "296-25160-2-ND",+ "mouser": "595-TPS2062QDGNRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:33:43Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-25160-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TPS2062QDGNRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device; all device voltages are specified with respect to GND, and the exposed PowerPAD must be connected to this pin."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Input voltage to the power switches, recommended 2.7 V to 5.5 V with an absolute maximum range of -0.3 V to 6 V."+ },+ {+ "number": "3",+ "name": "EN1",+ "type": "input",+ "description": "Enable input for the IN-OUT1 power switch; a logic low turns the switch on, with a recommended input range of 0 V to 5.5 V."+ },+ {+ "number": "4",+ "name": "EN2",+ "type": "input",+ "description": "Enable input for the IN-OUT2 power switch; a logic low turns the switch on, with a recommended input range of 0 V to 5.5 V."+ },+ {+ "number": "5",+ "name": "OC2",+ "type": "output",+ "description": "Open-drain overcurrent output for IN-OUT2, asserted active low after a 10-ms deglitch on overcurrent or overtemperature, with output low voltage of 0.4 V max at 5 mA."+ },+ {+ "number": "6",+ "name": "OUT2",+ "type": "output",+ "description": "Power-switch output for IN-OUT2, rated for a continuous output current of 0 to 1 A."+ },+ {+ "number": "7",+ "name": "OUT1",+ "type": "output",+ "description": "Power-switch output for IN-OUT1, rated for a continuous output current of 0 to 1 A."+ },+ {+ "number": "8",+ "name": "OC1",+ "type": "output",+ "description": "Open-drain overcurrent output for IN-OUT1, asserted active low after a 10-ms deglitch on overcurrent or overtemperature, with output low voltage of 0.4 V max at 5 mA."+ },+ {+ "number": "9",+ "name": "PowerPAD",+ "type": "power_in",+ "description": "Exposed thermal pad internally connected to GND, used to heat-sink the part to the board; it should be connected to the GND pin."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin table lists EN1 and EN2 as active-low on pins 3 and 4, and also lists active-high EN1/EN2 en; The exposed thermal pad has no number in the pin table. Pad number 9 comes from the land pattern and; Pin 2 IN and the other pins have no pin description with a specific limit in the pin table. The IN v"+ ],+ "pages_sent": 28,+ "cost_usd": 0.1117,+ "at": "2026-10-08T15:33:24"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tps2062-q1",+ "pages": 28,+ "sha256": "15b91d2401ea94b3",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 9,+ "described": 9,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tps2062qdgnrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 0.96+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps2062qdgnrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 0.96+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5134bcbff8d902b0186772fc4707a7392636fb62a1f8c2b37a0a20948ebf85e1",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}