← Commit history

tps2001ddbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·73afd57109 · ·parent 14dbc6a
2 files changed +87−7
package.json+45−5
@@ -65,19 +65,19 @@         "number": "3",         "name": "FLT",         "type": "output",-        "description": "Active-low open-drain fault output asserted during overcurrent (\u22652.3 A) or overtemperature (\u2265135\u00b0C in current limit) with 6 ms to 12 ms deglitch period."+        "description": "Active-low open-drain fault output asserted during overcurrent (≥2.3 A) or overtemperature (≥135°C in current limit) with 6 ms to 12 ms deglitch period."       },       {         "number": "4",         "name": "EN",         "type": "input",-        "description": "Enable input, logic high (\u22651.8 V) turns on power switch; logic low (\u22640.7 V) disables device with quiescent current reduced below 1 \u00b5A."+        "description": "Enable input, logic high (≥1.8 V) turns on power switch; logic low (≤0.7 V) disables device with quiescent current reduced below 1 µA."       },       {         "number": "5",         "name": "IN",         "type": "power_in",-        "description": "Input voltage supply, rated 4.5 V to 5.5 V; power-switch drain requiring 0.1 \u00b5F or greater ceramic bypass capacitor to GND."+        "description": "Input voltage supply, rated 4.5 V to 5.5 V; power-switch drain requiring 0.1 µF or greater ceramic bypass capacitor to GND."       }     ],     "provenance": {@@ -112,6 +112,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps2001ddbvr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps2001ddbvr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3dfacd449f36fb82fe87a883010a6fddbbb14bca61c048245f9e64d5d077b0cf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -97,7 +97,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps2001ddbvr.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps2001ddbvr-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.8,+          2.9,+          1.55+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "3dfacd449f36fb82fe87a883010a6fddbbb14bca61c048245f9e64d5d077b0cf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -145,4 +185,4 @@     "public": true   },   "updated_at": "2026-09-25T11:47:23.576Z"-}\ No newline at end of file+}