component
TPS1HC30BQPWPRQ1
Public Made by Adomby adom
Texas Instruments Power Management - Specialized, HTSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+51@@ -0,0 +1,51 @@+# TPS1HC30BQPWPRQ1++**Texas Instruments** · Power Management - Specialized · HTSSOP-14++TPS1HC30BQPWPRQ1 from Texas Instruments, in a HTSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Power ground of device, internally connected to thermal pad; connect to resistor-diode ground network for reverse battery protection. |+| 2 | EN | input | Input control for channel activation with internal pulldown; VIL = 0.8 V, VIH = 1.5 V, operating range 0-5.5 V. |+| 3 | DIAG_EN | input | Enable-disable input for diagnostics with internal pulldown; VIL = 0.8 V, VIH = 1.5 V, controls SNS and FLT pin functionality when high. |+| 4 | FAULT | output | Open-drain global fault output with internal 150 kΩ pull-up; pulled low (VFLT ≤ 0.5 V) on overcurrent, thermal shutdown, open load, or short-to-battery fault conditions. |+| 5 | LATCH | input | Input control for thermal shutdown behavior with internal pulldown; VIL = 0.8 V, VIH = 1.5 V, determines latch-off mode (high) or auto-retry mode (low). |+| 6 | SNS | output | Analog current sense output reflecting load current through 1560:1 sense ratio (ISNS = IOUT/1560); output voltage 0-4 V linear, clamped to VSNSFH (3.15-5.77 V) at fault. |+| 7 | ILIM | output | Adjustable current limit reference output; connect external resistor RILIM (7.15-71.5 kΩ) to GND to set ICL via KCL ratio, or short to GND for 12 A fixed limit, or leave floating for 6 A default. |+| 8 | NC | unconnected | No internal connection; can be left unconnected or grounded. |+| 9 | VOUT | power_out | High-side switch power output connected to load; sources maximum 5 A continuous at 30 mΩ on-resistance (TJ = 25°C, VBB = 6-28 V) with integrated inductive load clamp. |+| 10 | VOUT | power_out | High-side switch power output connected to load; sources maximum 5 A continuous at 30 mΩ on-resistance (TJ = 25°C, VBB = 6-28 V) with integrated inductive load clamp. |+| 11 | NC | unconnected | No internal connection; can be left unconnected or grounded. |+| 12 | VBB | power_in | Power supply input; operating range 2.6-28 V extended (3.0-18 V nominal) with UVLO protection at VUVLOR = 3.5 V and VUVLOF = 2.6 V; includes reverse polarity and load dump protection. |+| 13 | VBB | power_in | Power supply input; operating range 2.6-28 V extended (3.0-18 V nominal) with UVLO protection at VUVLOR = 3.5 V and VUVLOF = 2.6 V; includes reverse polarity and load dump protection. |+| 14 | NC | unconnected | No internal connection; can be left unconnected or grounded. |+| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-14 |+| Category | Power Management (PMIC) |+| Pins | 15 |++## CAD (KiCad official)++- Symbol: `TPS1HC30BQPWPRQ1`+- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-14 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904044279832576) (55 pp, sha256 `109968a76198453e`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps1hc30bqpwprq1-datasheet.pdf)
page.jsonadded+183@@ -0,0 +1,183 @@+{+ "slug": "tps1hc30bqpwprq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Power Management - Specialized, HTSSOP-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tps1hc30bqpwprq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tps1hc30bqpwprq1.kicad_sym",+ "tps1hc30bqpwprq1.kicad_mod",+ "tps1hc30bqpwprq1.glb",+ "tps1hc30bqpwprq1.step",+ "tps1hc30bqpwprq1.lbr",+ "docs/hero.png",+ "docs/tps1hc30bqpwprq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPS1HC30BQPWPRQ1",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-14",+ "pin_count": 15,+ "category": "Power Management (PMIC)",+ "subcategory": "Power Management - Specialized",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904044279832576",+ "parts": {+ "symbol": "tps1hc30bqpwprq1.kicad_sym",+ "footprint": "tps1hc30bqpwprq1.kicad_mod",+ "model_3d": "tps1hc30bqpwprq1.glb",+ "model_3d_step": "tps1hc30bqpwprq1.step",+ "lbr": "tps1hc30bqpwprq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C7496534"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground of device, internally connected to thermal pad; connect to resistor-diode ground network for reverse battery protection."+ },+ {+ "number": "2",+ "name": "EN",+ "type": "input",+ "description": "Input control for channel activation with internal pulldown; VIL = 0.8 V, VIH = 1.5 V, operating range 0-5.5 V."+ },+ {+ "number": "3",+ "name": "DIAG_EN",+ "type": "input",+ "description": "Enable-disable input for diagnostics with internal pulldown; VIL = 0.8 V, VIH = 1.5 V, controls SNS and FLT pin functionality when high."+ },+ {+ "number": "4",+ "name": "FAULT",+ "type": "output",+ "description": "Open-drain global fault output with internal 150 kΩ pull-up; pulled low (VFLT ≤ 0.5 V) on overcurrent, thermal shutdown, open load, or short-to-battery fault conditions."+ },+ {+ "number": "5",+ "name": "LATCH",+ "type": "input",+ "description": "Input control for thermal shutdown behavior with internal pulldown; VIL = 0.8 V, VIH = 1.5 V, determines latch-off mode (high) or auto-retry mode (low)."+ },+ {+ "number": "6",+ "name": "SNS",+ "type": "output",+ "description": "Analog current sense output reflecting load current through 1560:1 sense ratio (ISNS = IOUT/1560); output voltage 0-4 V linear, clamped to VSNSFH (3.15-5.77 V) at fault."+ },+ {+ "number": "7",+ "name": "ILIM",+ "type": "output",+ "description": "Adjustable current limit reference output; connect external resistor RILIM (7.15-71.5 kΩ) to GND to set ICL via KCL ratio, or short to GND for 12 A fixed limit, or leave floating for 6 A default."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; can be left unconnected or grounded."+ },+ {+ "number": "9",+ "name": "VOUT",+ "type": "power_out",+ "description": "High-side switch power output connected to load; sources maximum 5 A continuous at 30 mΩ on-resistance (TJ = 25°C, VBB = 6-28 V) with integrated inductive load clamp."+ },+ {+ "number": "10",+ "name": "VOUT",+ "type": "power_out",+ "description": "High-side switch power output connected to load; sources maximum 5 A continuous at 30 mΩ on-resistance (TJ = 25°C, VBB = 6-28 V) with integrated inductive load clamp."+ },+ {+ "number": "11",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; can be left unconnected or grounded."+ },+ {+ "number": "12",+ "name": "VBB",+ "type": "power_in",+ "description": "Power supply input; operating range 2.6-28 V extended (3.0-18 V nominal) with UVLO protection at VUVLOR = 3.5 V and VUVLOF = 2.6 V; includes reverse polarity and load dump protection."+ },+ {+ "number": "13",+ "name": "VBB",+ "type": "power_in",+ "description": "Power supply input; operating range 2.6-28 V extended (3.0-18 V nominal) with UVLO protection at VUVLOR = 3.5 V and VUVLOF = 2.6 V; includes reverse polarity and load dump protection."+ },+ {+ "number": "14",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; can be left unconnected or grounded."+ },+ {+ "number": "15",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "exposed pad 15 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 55,+ "cost_usd": 0.5075,+ "at": "2026-09-17T18:26:47"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904044279832576",+ "pages": 55,+ "sha256": "109968a76198453e",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 15,+ "described": 15,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}