TPS1HC30BQPWPRQ1

@@ -69,7 +69,7 @@         "number": "4",         "name": "FAULT",         "type": "output",-        "description": "Open-drain global fault output with internal 150 k\u03a9 pull-up; pulled low (VFLT \u2264 0.5 V) on overcurrent, thermal shutdown, open load, or short-to-battery fault conditions."+        "description": "Open-drain global fault output with internal 150 kΩ pull-up; pulled low (VFLT ≤ 0.5 V) on overcurrent, thermal shutdown, open load, or short-to-battery fault conditions."       },       {         "number": "5",@@ -87,7 +87,7 @@         "number": "7",         "name": "ILIM",         "type": "output",-        "description": "Adjustable current limit reference output; connect external resistor RILIM (7.15-71.5 k\u03a9) to GND to set ICL via KCL ratio, or short to GND for 12 A fixed limit, or leave floating for 6 A default."+        "description": "Adjustable current limit reference output; connect external resistor RILIM (7.15-71.5 kΩ) to GND to set ICL via KCL ratio, or short to GND for 12 A fixed limit, or leave floating for 6 A default."       },       {         "number": "8",@@ -99,13 +99,13 @@         "number": "9",         "name": "VOUT",         "type": "power_out",-        "description": "High-side switch power output connected to load; sources maximum 5 A continuous at 30 m\u03a9 on-resistance (TJ = 25\u00b0C, VBB = 6-28 V) with integrated inductive load clamp."+        "description": "High-side switch power output connected to load; sources maximum 5 A continuous at 30 mΩ on-resistance (TJ = 25°C, VBB = 6-28 V) with integrated inductive load clamp."       },       {         "number": "10",         "name": "VOUT",         "type": "power_out",-        "description": "High-side switch power output connected to load; sources maximum 5 A continuous at 30 m\u03a9 on-resistance (TJ = 25\u00b0C, VBB = 6-28 V) with integrated inductive load clamp."+        "description": "High-side switch power output connected to load; sources maximum 5 A continuous at 30 mΩ on-resistance (TJ = 25°C, VBB = 6-28 V) with integrated inductive load clamp."       },       {         "number": "11",@@ -173,6 +173,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tps1hc30bqpwprq1.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tps1hc30bqpwprq1-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          7.35,+          5.0,+          1.05+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "ed5417e841fac7a318e2dc7ae74ecbb787b734c332479d5f5bca60ac52583dfc",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}