← Commit history
tps1hb50aqpwprq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+91−11
package.json+49−9@@ -59,43 +59,43 @@ "number": "2", "name": "SNS", "type": "output",- "description": "Proportional current sense output sourcing IOUT/KSNS (KSNS=1500) when SEL1=0, or temperature sense current (dISNST/dT=0.0112 mA/\u00b0C) when SEL1=1, or ISNSFH (4.5 mA typ) during fault indication."+ "description": "Proportional current sense output sourcing IOUT/KSNS (KSNS=1500) when SEL1=0, or temperature sense current (dISNST/dT=0.0112 mA/°C) when SEL1=1, or ISNSFH (4.5 mA typ) during fault indication." }, { "number": "3", "name": "LATCH", "type": "input",- "description": "Latch control input with 350 mV hysteresis; high level (VIH\u22652.0V) latches output after fault events, low level (VIL<0.8V) enables auto-retry after tRETRY (1-3 ms) expiration."+ "description": "Latch control input with 350 mV hysteresis; high level (VIH≥2.0V) latches output after fault events, low level (VIL<0.8V) enables auto-retry after tRETRY (1-3 ms) expiration." }, { "number": "4", "name": "EN", "type": "input",- "description": "Active-high enable control input with 350 mV hysteresis; high level (VIH\u22652.0V) enables output switch, low level (VIL<0.8V) disables output."+ "description": "Active-high enable control input with 350 mV hysteresis; high level (VIH≥2.0V) enables output switch, low level (VIL<0.8V) disables output." }, { "number": "5", "name": "ILIM", "type": "output",- "description": "Programmable current limit threshold output; connect external resistor (RILIM 5 k\u03a9 to 25 k\u03a9) from this pin to VBB to set current limit (ICL = KCL / RILIM)."+ "description": "Programmable current limit threshold output; connect external resistor (RILIM 5 kΩ to 25 kΩ) from this pin to VBB to set current limit (ICL = KCL / RILIM)." }, { "number": "6", "name": "VOUT", "type": "output",- "description": "High-side switch output pin (one of three parallel pins); RON 50 m\u03a9 at TJ=25\u00b0C and 100 m\u03a9 at TJ=150\u00b0C, with VDS clamp voltage 40-46V for inductive load protection."+ "description": "High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection." }, { "number": "7", "name": "VOUT", "type": "output",- "description": "High-side switch output pin (one of three parallel pins); RON 50 m\u03a9 at TJ=25\u00b0C and 100 m\u03a9 at TJ=150\u00b0C, with VDS clamp voltage 40-46V for inductive load protection."+ "description": "High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection." }, { "number": "8", "name": "VOUT", "type": "output",- "description": "High-side switch output pin (one of three parallel pins); RON 50 m\u03a9 at TJ=25\u00b0C and 100 m\u03a9 at TJ=150\u00b0C, with VDS clamp voltage 40-46V for inductive load protection."+ "description": "High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection." }, { "number": "9",@@ -184,6 +184,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tps1hb50aqpwprq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps1hb50aqpwprq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "143f3e75dd2a3c6d03ed485554c6ff340e23f43c888307d0d546dfb605e8ebf2",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -169,7 +169,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tps1hb50aqpwprq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "7982746831c0bd23f4690608869ad67776faae5c762fb0376666126a3998921b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tps1hb50aqpwprq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5.0,+ 1.1+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "143f3e75dd2a3c6d03ed485554c6ff340e23f43c888307d0d546dfb605e8ebf2",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -216,4 +256,4 @@ "visibility": { "public": true }-}+}