← Commit history

Initial commit: component/tps1hb50aqpwprq1

Ray ·64e799fbca ·
2 files changed +249
README.mdadded+54
@@ -0,0 +1,54 @@+# TPS1HB50AQPWPRQ1++**Texas Instruments** · Power Distribution Switches · HTSSOP-16-EP++TPS1HB50AQPWPRQ1 from Texas Instruments, in a HTSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Device ground reference and return path for all internal circuits and external currents; 0V potential node for all signal measurements. |+| 2 | SNS | output | Proportional current sense output sourcing IOUT/KSNS (KSNS=1500) when SEL1=0, or temperature sense current (dISNST/dT=0.0112 mA/°C) when SEL1=1, or ISNSFH (4.5 mA typ) during fault indication. |+| 3 | LATCH | input | Latch control input with 350 mV hysteresis; high level (VIH≥2.0V) latches output after fault events, low level (VIL<0.8V) enables auto-retry after tRETRY (1-3 ms) expiration. |+| 4 | EN | input | Active-high enable control input with 350 mV hysteresis; high level (VIH≥2.0V) enables output switch, low level (VIL<0.8V) disables output. |+| 5 | ILIM | output | Programmable current limit threshold output; connect external resistor (RILIM 5 kΩ to 25 kΩ) from this pin to VBB to set current limit (ICL = KCL / RILIM). |+| 6 | VOUT | output | High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection. |+| 7 | VOUT | output | High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection. |+| 8 | VOUT | output | High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection. |+| 9 | NC | unconnected | No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused. |+| 10 | NC | unconnected | No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused. |+| 11 | NC | unconnected | No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused. |+| 12 | NC | unconnected | No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused. |+| 13 | NC | unconnected | No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused. |+| 14 | SEL1 | input | Multiplexer select input with 350 mV hysteresis; low (SEL1=0) routes load current sense to SNS, high (SEL1=1) routes junction temperature sense to SNS. |+| 15 | NC | unconnected | No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused. |+| 16 | DIA_EN | input | Active-high diagnostic enable input with 350 mV hysteresis; high level enables open-load and short-to-battery detection while switch disabled, allowing analog SNS measurements and fault indication. |+| 17 | VBB | power_in | Positive supply input (exposed thermal pad); nominal operating range 6 V to 18 V (extended range 3 V to 28 V), with VBB clamp 58-76 V for transient protection to 40 V load dump. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-16-EP |+| Category | Power Management (PMIC) |+| Pins | 17 |++## CAD (KiCad official)++- Symbol: `TPS1HB50AQPWPRQ1`+- Footprint: `Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm`+- 3D model: HTSSOP-16-EP (KiCad packages3D, STEP)+- 3D model files: `tps1hb50aqpwprq1-etched.step` / `tps1hb50aqpwprq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tps1hb50aqpwprq1.step` / `tps1hb50aqpwprq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tps1hb50-q1) (49 pp, sha256 `9d75688a469e9115`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tps1hb50aqpwprq1-datasheet.pdf)
page.jsonadded+195
@@ -0,0 +1,195 @@+{+  "slug": "tps1hb50aqpwprq1",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Power Distribution Switches, HTSSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tps1hb50aqpwprq1",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tps1hb50aqpwprq1.kicad_sym",+    "tps1hb50aqpwprq1.kicad_mod",+    "tps1hb50aqpwprq1.glb",+    "tps1hb50aqpwprq1.step",+    "tps1hb50aqpwprq1.lbr",+    "docs/hero.png",+    "docs/tps1hb50aqpwprq1-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TPS1HB50AQPWPRQ1",+    "manufacturer": "Texas Instruments",+    "package": "HTSSOP-16-EP",+    "pin_count": 17,+    "category": "Power Management (PMIC)",+    "subcategory": "Power Distribution Switches",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tps1hb50-q1",+    "parts": {+      "symbol": "tps1hb50aqpwprq1.kicad_sym",+      "footprint": "tps1hb50aqpwprq1.kicad_mod",+      "model_3d": "tps1hb50aqpwprq1-etched.glb",+      "model_3d_plain": "tps1hb50aqpwprq1.glb",+      "model_3d_step": "tps1hb50aqpwprq1-etched.step",+      "model_3d_step_plain": "tps1hb50aqpwprq1.step",+      "lbr": "tps1hb50aqpwprq1.lbr"+    },+    "distributor_links": {+      "lcsc": "C2861208"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference and return path for all internal circuits and external currents; 0V potential node for all signal measurements."+      },+      {+        "number": "2",+        "name": "SNS",+        "type": "output",+        "description": "Proportional current sense output sourcing IOUT/KSNS (KSNS=1500) when SEL1=0, or temperature sense current (dISNST/dT=0.0112 mA/°C) when SEL1=1, or ISNSFH (4.5 mA typ) during fault indication."+      },+      {+        "number": "3",+        "name": "LATCH",+        "type": "input",+        "description": "Latch control input with 350 mV hysteresis; high level (VIH≥2.0V) latches output after fault events, low level (VIL<0.8V) enables auto-retry after tRETRY (1-3 ms) expiration."+      },+      {+        "number": "4",+        "name": "EN",+        "type": "input",+        "description": "Active-high enable control input with 350 mV hysteresis; high level (VIH≥2.0V) enables output switch, low level (VIL<0.8V) disables output."+      },+      {+        "number": "5",+        "name": "ILIM",+        "type": "output",+        "description": "Programmable current limit threshold output; connect external resistor (RILIM 5 kΩ to 25 kΩ) from this pin to VBB to set current limit (ICL = KCL / RILIM)."+      },+      {+        "number": "6",+        "name": "VOUT",+        "type": "output",+        "description": "High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection."+      },+      {+        "number": "7",+        "name": "VOUT",+        "type": "output",+        "description": "High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection."+      },+      {+        "number": "8",+        "name": "VOUT",+        "type": "output",+        "description": "High-side switch output pin (one of three parallel pins); RON 50 mΩ at TJ=25°C and 100 mΩ at TJ=150°C, with VDS clamp voltage 40-46V for inductive load protection."+      },+      {+        "number": "9",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused."+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused."+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused."+      },+      {+        "number": "12",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused."+      },+      {+        "number": "13",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused."+      },+      {+        "number": "14",+        "name": "SEL1",+        "type": "input",+        "description": "Multiplexer select input with 350 mV hysteresis; low (SEL1=0) routes load current sense to SNS, high (SEL1=1) routes junction temperature sense to SNS."+      },+      {+        "number": "15",+        "name": "NC",+        "type": "unconnected",+        "description": "No Connect pin; leave floating for normal operation or optionally ground through RPROT resistor if unused."+      },+      {+        "number": "16",+        "name": "DIA_EN",+        "type": "input",+        "description": "Active-high diagnostic enable input with 350 mV hysteresis; high level enables open-load and short-to-battery detection while switch disabled, allowing analog SNS measurements and fault indication."+      },+      {+        "number": "17",+        "name": "VBB",+        "type": "power_in",+        "description": "Positive supply input (exposed thermal pad); nominal operating range 6 V to 18 V (extended range 3 V to 28 V), with VBB clamp 58-76 V for transient protection to 40 V load dump."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 49,+        "cost_usd": 0.4587,+        "at": "2026-09-24T03:30:07"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tps1hb50-q1",+        "pages": 49,+        "sha256": "9d75688a469e9115",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 17,+        "described": 17,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file