component
TPLP5907MFX-3.3
Public Made by Adomby adom
TECH PUBLIC TPLP5907MFX 3 3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C5370990). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+27−7
page.json+7−5@@ -26,25 +26,27 @@ "model_3d_step": "tplp5907mfx-3-3.step", "lbr": "tplp5907mfx-3-3.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C5370990"+ }, "pins": [ { "number": "1", "name": "VIN", "type": "power_in",- "description": "Input supply voltage. Accepts 1.2V to 5.5V; absolute maximum -0.3V to 6.5V referenced to GND. Bypass to GND with a 1µF ceramic or tantalum capacitor placed close to the pin."+ "description": "Input supply voltage. Accepts 1.2V to 5.5V; absolute maximum -0.3V to 6.5V referenced to GND. Bypass to GND with a 1\u00b5F ceramic or tantalum capacitor placed close to the pin." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Device ground. Serves as the return for VIN, VOUT, and the internal reference. Typical ground (quiescent) current is 2µA at no load."+ "description": "Device ground. Serves as the return for VIN, VOUT, and the internal reference. Typical ground (quiescent) current is 2\u00b5A at no load." }, { "number": "3", "name": "EN", "type": "input",- "description": "Enable control input. Logic-high (VENH ≥ 0.5V typ 0.7V) turns the regulator on; logic-low (VENL ≤ 0.85V max, with typ threshold 0.65V) shuts it down to ~0.1µA. When disabled, VOUT is actively discharged through an internal ~80Ω resistor. Absolute maximum -0.3V to 6.5V; do not leave floating."+ "description": "Enable control input. Logic-high (VENH \u2265 0.5V typ 0.7V) turns the regulator on; logic-low (VENL \u2264 0.85V max, with typ threshold 0.65V) shuts it down to ~0.1\u00b5A. When disabled, VOUT is actively discharged through an internal ~80\u03a9 resistor. Absolute maximum -0.3V to 6.5V; do not leave floating." }, { "number": "4",@@ -56,7 +58,7 @@ "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated output of the LDO. Fixed 3.3V ±2% at up to 300mA. Requires a minimum 1µF ceramic or tantalum output capacitor to GND for loop stability."+ "description": "Regulated output of the LDO. Fixed 3.3V \u00b12% at up to 300mA. Requires a minimum 1\u00b5F ceramic or tantalum output capacitor to GND for loop stability." } ], "provenance": {
tplp5907mfx-3-3.lbr+20−2@@ -59,6 +59,18 @@ <smd name="3" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/> <smd name="5" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.4500" y="1.5100"/>+ <vertex x="-1.6900" y="1.8400"/>+ <vertex x="-1.2100" y="1.8400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.4000" y="1.4500"/>+ <vertex x="0.8000" y="1.4500"/>+ <vertex x="0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="-1.4500"/>+ <vertex x="-0.8000" y="1.0500"/>+ </polygon> <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@ <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="TPLP5907MFX-3.3">@@ -100,7 +112,13 @@ <connect gate="G$1" pin="VOUT" pad="5"/> <connect gate="G$1" pin="NC" pad="4"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="TPLP5907MFX-3.3" constant="no"/>+ <attribute name="MANUFACTURER" value="TECH PUBLIC TPLP5907MFX 3 3" constant="no"/>+ <attribute name="LCSC_PN" value="C5370990" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>