component
TPD6S300RUKR
Public Made by Adomby adom
Texas Instruments ESD And Surge Protection (TVS/ESD), WQFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+58@@ -0,0 +1,58 @@+# TPD6S300RUKR++**Texas Instruments** · ESD And Surge Protection (TVS/ESD) · WQFN-20-EP(3x3)++TPD6S300RUKR from Texas Instruments, in a WQFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C_SBU1 | bidirectional | Connector side of the SBU1 OVP FET; connect to either SBU pin of the USB Type-C connector. |+| 2 | C_SBU2 | bidirectional | Connector side of the SBU2 OVP FET; connect to either SBU pin of the USB Type-C connector. |+| 3 | VBIAS | power_in | Power pin for ESD support capacitor; place a 0.1-µF capacitor on this pin to ground. |+| 4 | C_CC1 | bidirectional | Connector side of the CC1 OVP FET; connect to either CC pin of the USB Type-C connector. |+| 5 | C_CC2 | bidirectional | Connector side of the CC2 OVP FET; connect to either CC pin of the USB Type-C connector. |+| 6 | RPD_G2 | bidirectional | Short to C_CC2 if dead battery resistors are needed; if not needed, short pin to GND. |+| 7 | RPD_G1 | bidirectional | Short to C_CC1 if dead battery resistors are needed; if not needed, short pin to GND. |+| 8 | GND | power_in | Ground. |+| 9 | FLT | output | Open drain for fault reporting. |+| 10 | VPWR | power_in | 2.7-V-3.6-V power supply. |+| 11 | CC2 | bidirectional | System side of the CC2 OVP FET; connect to either CC pin of the CC/PD controller. |+| 12 | CC1 | bidirectional | System side of the CC1 OVP FET; connect to either CC pin of the CC/PD controller. |+| 13 | GND | power_in | Ground. |+| 14 | SBU2 | bidirectional | System side of the SBU2 OVP FET; connect to either SBU pin of the SBU MUX. |+| 15 | SBU1 | bidirectional | System side of the SBU1 OVP FET; connect to either SBU pin of the SBU MUX. |+| 16 | N.C. | unconnected | Unused pin; connect to ground. |+| 17 | N.C. | unconnected | Unused pin; connect to ground. |+| 18 | GND | power_in | Ground. |+| 19 | D2 | bidirectional | USB2.0 IEC ESD protection; connect to any of the USB2.0 pins of the USB Type-C connector. |+| 20 | D1 | bidirectional | USB2.0 IEC ESD protection; connect to any of the USB2.0 pins of the USB Type-C connector. |+| 21 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WQFN-20-EP(3x3) |+| Category | Circuit Protection |+| Pins | 21 |++## CAD (KiCad official)++- Symbol: `TPD6S300RUKR`+- Footprint: `Package_DFN_QFN:UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm`+- 3D model: WQFN-20-EP(3x3) (KiCad packages3D, STEP)+- 3D model files: `tpd6s300rukr-etched.step` / `tpd6s300rukr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tpd6s300rukr.step` / `tpd6s300rukr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tpd6s300) (35 pp, sha256 `3be210d93b38eb2d`, retrieved 2026-10-03, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tpd6s300rukr-datasheet.pdf)
page.jsonadded+235@@ -0,0 +1,235 @@+{+ "slug": "tpd6s300rukr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments ESD And Surge Protection (TVS/ESD), WQFN-20-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "circuit protection",+ "tpd6s300rukr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tpd6s300rukr.kicad_sym",+ "tpd6s300rukr.kicad_mod",+ "tpd6s300rukr.glb",+ "tpd6s300rukr.step",+ "tpd6s300rukr.lbr",+ "docs/hero.png",+ "docs/tpd6s300rukr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tpd6s300rukr-hero.glb",+ "tpd6s300rukr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TPD6S300RUKR",+ "manufacturer": "Texas Instruments",+ "package": "WQFN-20-EP(3x3)",+ "pin_count": 21,+ "category": "Circuit Protection",+ "subcategory": "ESD And Surge Protection (TVS/ESD)",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tpd6s300",+ "parts": {+ "symbol": "tpd6s300rukr.kicad_sym",+ "footprint": "tpd6s300rukr.kicad_mod",+ "model_3d": "tpd6s300rukr-hero.glb",+ "model_3d_plain": "tpd6s300rukr.glb",+ "model_3d_step": "tpd6s300rukr-etched.step",+ "model_3d_step_plain": "tpd6s300rukr.step",+ "lbr": "tpd6s300rukr.lbr"+ },+ "distributor_links": {+ "lcsc": 2649810,+ "digikey": "296-45176-2-ND",+ "mouser": "595-TPD6S300RUKR"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T01:03:06Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-45176-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TPD6S300RUKR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "C_SBU1",+ "type": "bidirectional",+ "description": "Connector side of the SBU1 OVP FET; connect to either SBU pin of the USB Type-C connector."+ },+ {+ "number": "2",+ "name": "C_SBU2",+ "type": "bidirectional",+ "description": "Connector side of the SBU2 OVP FET; connect to either SBU pin of the USB Type-C connector."+ },+ {+ "number": "3",+ "name": "VBIAS",+ "type": "power_in",+ "description": "Power pin for ESD support capacitor; place a 0.1-µF capacitor on this pin to ground."+ },+ {+ "number": "4",+ "name": "C_CC1",+ "type": "bidirectional",+ "description": "Connector side of the CC1 OVP FET; connect to either CC pin of the USB Type-C connector."+ },+ {+ "number": "5",+ "name": "C_CC2",+ "type": "bidirectional",+ "description": "Connector side of the CC2 OVP FET; connect to either CC pin of the USB Type-C connector."+ },+ {+ "number": "6",+ "name": "RPD_G2",+ "type": "bidirectional",+ "description": "Short to C_CC2 if dead battery resistors are needed; if not needed, short pin to GND."+ },+ {+ "number": "7",+ "name": "RPD_G1",+ "type": "bidirectional",+ "description": "Short to C_CC1 if dead battery resistors are needed; if not needed, short pin to GND."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "9",+ "name": "FLT",+ "type": "output",+ "description": "Open drain for fault reporting."+ },+ {+ "number": "10",+ "name": "VPWR",+ "type": "power_in",+ "description": "2.7-V-3.6-V power supply."+ },+ {+ "number": "11",+ "name": "CC2",+ "type": "bidirectional",+ "description": "System side of the CC2 OVP FET; connect to either CC pin of the CC/PD controller."+ },+ {+ "number": "12",+ "name": "CC1",+ "type": "bidirectional",+ "description": "System side of the CC1 OVP FET; connect to either CC pin of the CC/PD controller."+ },+ {+ "number": "13",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "14",+ "name": "SBU2",+ "type": "bidirectional",+ "description": "System side of the SBU2 OVP FET; connect to either SBU pin of the SBU MUX."+ },+ {+ "number": "15",+ "name": "SBU1",+ "type": "bidirectional",+ "description": "System side of the SBU1 OVP FET; connect to either SBU pin of the SBU MUX."+ },+ {+ "number": "16",+ "name": "N.C.",+ "type": "unconnected",+ "description": "Unused pin; connect to ground."+ },+ {+ "number": "17",+ "name": "N.C.",+ "type": "unconnected",+ "description": "Unused pin; connect to ground."+ },+ {+ "number": "18",+ "name": "GND",+ "type": "power_in",+ "description": "Ground."+ },+ {+ "number": "19",+ "name": "D2",+ "type": "bidirectional",+ "description": "USB2.0 IEC ESD protection; connect to any of the USB2.0 pins of the USB Type-C connector."+ },+ {+ "number": "20",+ "name": "D1",+ "type": "bidirectional",+ "description": "USB2.0 IEC ESD protection; connect to any of the USB2.0 pins of the USB Type-C connector."+ },+ {+ "number": "21",+ "name": "Thermal Pad",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 8,+ "cost_usd": 0.1173,+ "at": "2026-10-03T01:02:31"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tpd6s300",+ "pages": 35,+ "sha256": "3be210d93b38eb2d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 21,+ "described": 21,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}