← Commit history
README.mdadded+66@@ -0,0 +1,66 @@+# TPA3136D2PWPR++**Texas Instruments** · Audio Amplifiers · HTSSOP-28++TPA3136D2PWPR from Texas Instruments, in a HTSSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SD | input | Shutdown logic input for audio amp (LOW = outputs Hi-Z, HIGH = outputs enabled), TTL logic levels with compliance to AVCC. |+| 2 | FAULT | tri_state | Open drain output used to display short circuit or dc detect fault status, voltage compliant to AVCC. |+| 3 | LINP | input | Positive audio input for left channel, biased at 3 V. |+| 4 | LINN | input | Negative audio input for left channel, biased at 3 V. |+| 5 | NC | unconnected | No Connect pin, can be shorted to PVCC, shorted to GND, or left open. |+| 6 | NC | unconnected | No Connect pin, can be shorted to PVCC, shorted to GND, or left open. |+| 7 | AVCC | power_in | Analog supply voltage. |+| 8 | GND | power_in | Analog signal ground. |+| 9 | GVDD | power_out | High-side FET gate drive supply output with nominal voltage of 7 V. |+| 10 | PLIMIT | input | Power Limiter Control pin, virtual output rail is approximately 4 times the voltage at this pin. |+| 11 | RINN | input | Negative audio input for right channel, biased at 3 V. |+| 12 | RINP | input | Positive audio input for right channel, biased at 3 V. |+| 13 | NC | unconnected | No Connect pin, can be shorted to PVCC, shorted to GND, or left open. |+| 14 | PBTL | input | Parallel BTL mode select pin: LOW = Stereo BTL mode, HIGH = Mono PBTL mode. |+| 15 | PVCC | power_in | Power supply for right channel H-bridge, right and left channel power supplies are connected internally. |+| 16 | PVCC | power_in | Power supply for right channel H-bridge, right and left channel power supplies are connected internally. |+| 17 | BSPR | bidirectional | Bootstrap input/output for right channel positive high-side FET, connect 0.22 µF capacitor from BSPR to OUTPR. |+| 18 | OUTPR | output | Class-D H-bridge positive output for right channel. |+| 19 | GND | power_in | Power ground for the H-bridges. |+| 20 | OUTNR | output | Class-D H-bridge negative output for right channel. |+| 21 | BSNR | bidirectional | Bootstrap input/output for right channel negative high-side FET, connect 0.22 µF capacitor from BSNR to OUTNR. |+| 22 | BSNL | bidirectional | Bootstrap input/output for left channel negative high-side FET, connect 0.22 µF capacitor from BSNL to OUTNL. |+| 23 | OUTNL | output | Class-D H-bridge negative output for left channel. |+| 24 | GND | power_in | Power ground for the H-bridges. |+| 25 | OUTPL | output | Class-D H-bridge positive output for left channel. |+| 26 | BSPL | bidirectional | Bootstrap input/output for left channel positive high-side FET, connect 0.22 µF capacitor from BSPL to OUTPL. |+| 27 | PVCC | power_in | Power supply for left channel H-bridge, right and left channel power supplies are connected internally. |+| 28 | PVCC | power_in | Power supply for left channel H-bridge, right and left channel power supplies are connected internally. |+| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | HTSSOP-28 |+| Category | Amplifiers/Comparators |+| Pins | 29 |++## CAD (KiCad official)++- Symbol: `TPA3136D2PWPR`+- Footprint: `Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm`+- 3D model: HTSSOP-28 (KiCad packages3D, STEP)+- 3D model files: `tpa3136d2pwpr-etched.step` / `tpa3136d2pwpr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tpa3136d2pwpr.step` / `tpa3136d2pwpr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tpa3136d2) (38 pp, sha256 `5c11f426fed7ffaf`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tpa3136d2pwpr-datasheet.pdf)
page.jsonadded+271@@ -0,0 +1,271 @@+{+ "slug": "tpa3136d2pwpr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Audio Amplifiers, HTSSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "tpa3136d2pwpr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tpa3136d2pwpr.kicad_sym",+ "tpa3136d2pwpr.kicad_mod",+ "tpa3136d2pwpr.glb",+ "tpa3136d2pwpr.step",+ "tpa3136d2pwpr.lbr",+ "docs/hero.png",+ "docs/tpa3136d2pwpr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TPA3136D2PWPR",+ "manufacturer": "Texas Instruments",+ "package": "HTSSOP-28",+ "pin_count": 29,+ "category": "Amplifiers/Comparators",+ "subcategory": "Audio Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tpa3136d2",+ "parts": {+ "symbol": "tpa3136d2pwpr.kicad_sym",+ "footprint": "tpa3136d2pwpr.kicad_mod",+ "model_3d": "tpa3136d2pwpr-etched.glb",+ "model_3d_plain": "tpa3136d2pwpr.glb",+ "model_3d_step": "tpa3136d2pwpr-etched.step",+ "model_3d_step_plain": "tpa3136d2pwpr.step",+ "lbr": "tpa3136d2pwpr.lbr"+ },+ "distributor_links": {+ "lcsc": "C527556"+ },+ "pins": [+ {+ "number": "1",+ "name": "SD",+ "type": "input",+ "description": "Shutdown logic input for audio amp (LOW = outputs Hi-Z, HIGH = outputs enabled), TTL logic levels with compliance to AVCC."+ },+ {+ "number": "2",+ "name": "FAULT",+ "type": "tri_state",+ "description": "Open drain output used to display short circuit or dc detect fault status, voltage compliant to AVCC."+ },+ {+ "number": "3",+ "name": "LINP",+ "type": "input",+ "description": "Positive audio input for left channel, biased at 3 V."+ },+ {+ "number": "4",+ "name": "LINN",+ "type": "input",+ "description": "Negative audio input for left channel, biased at 3 V."+ },+ {+ "number": "5",+ "name": "NC",+ "type": "unconnected",+ "description": "No Connect pin, can be shorted to PVCC, shorted to GND, or left open."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No Connect pin, can be shorted to PVCC, shorted to GND, or left open."+ },+ {+ "number": "7",+ "name": "AVCC",+ "type": "power_in",+ "description": "Analog supply voltage."+ },+ {+ "number": "8",+ "name": "GND",+ "type": "power_in",+ "description": "Analog signal ground."+ },+ {+ "number": "9",+ "name": "GVDD",+ "type": "power_out",+ "description": "High-side FET gate drive supply output with nominal voltage of 7 V."+ },+ {+ "number": "10",+ "name": "PLIMIT",+ "type": "input",+ "description": "Power Limiter Control pin, virtual output rail is approximately 4 times the voltage at this pin."+ },+ {+ "number": "11",+ "name": "RINN",+ "type": "input",+ "description": "Negative audio input for right channel, biased at 3 V."+ },+ {+ "number": "12",+ "name": "RINP",+ "type": "input",+ "description": "Positive audio input for right channel, biased at 3 V."+ },+ {+ "number": "13",+ "name": "NC",+ "type": "unconnected",+ "description": "No Connect pin, can be shorted to PVCC, shorted to GND, or left open."+ },+ {+ "number": "14",+ "name": "PBTL",+ "type": "input",+ "description": "Parallel BTL mode select pin: LOW = Stereo BTL mode, HIGH = Mono PBTL mode."+ },+ {+ "number": "15",+ "name": "PVCC",+ "type": "power_in",+ "description": "Power supply for right channel H-bridge, right and left channel power supplies are connected internally."+ },+ {+ "number": "16",+ "name": "PVCC",+ "type": "power_in",+ "description": "Power supply for right channel H-bridge, right and left channel power supplies are connected internally."+ },+ {+ "number": "17",+ "name": "BSPR",+ "type": "bidirectional",+ "description": "Bootstrap input/output for right channel positive high-side FET, connect 0.22 µF capacitor from BSPR to OUTPR."+ },+ {+ "number": "18",+ "name": "OUTPR",+ "type": "output",+ "description": "Class-D H-bridge positive output for right channel."+ },+ {+ "number": "19",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground for the H-bridges."+ },+ {+ "number": "20",+ "name": "OUTNR",+ "type": "output",+ "description": "Class-D H-bridge negative output for right channel."+ },+ {+ "number": "21",+ "name": "BSNR",+ "type": "bidirectional",+ "description": "Bootstrap input/output for right channel negative high-side FET, connect 0.22 µF capacitor from BSNR to OUTNR."+ },+ {+ "number": "22",+ "name": "BSNL",+ "type": "bidirectional",+ "description": "Bootstrap input/output for left channel negative high-side FET, connect 0.22 µF capacitor from BSNL to OUTNL."+ },+ {+ "number": "23",+ "name": "OUTNL",+ "type": "output",+ "description": "Class-D H-bridge negative output for left channel."+ },+ {+ "number": "24",+ "name": "GND",+ "type": "power_in",+ "description": "Power ground for the H-bridges."+ },+ {+ "number": "25",+ "name": "OUTPL",+ "type": "output",+ "description": "Class-D H-bridge positive output for left channel."+ },+ {+ "number": "26",+ "name": "BSPL",+ "type": "bidirectional",+ "description": "Bootstrap input/output for left channel positive high-side FET, connect 0.22 µF capacitor from BSPL to OUTPL."+ },+ {+ "number": "27",+ "name": "PVCC",+ "type": "power_in",+ "description": "Power supply for left channel H-bridge, right and left channel power supplies are connected internally."+ },+ {+ "number": "28",+ "name": "PVCC",+ "type": "power_in",+ "description": "Power supply for left channel H-bridge, right and left channel power supplies are connected internally."+ },+ {+ "number": "29",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: NC pins (5, 6, 13) are specified as user-connectable to PVCC or GND, which is unusual for 'no connec; Bootstrap pins (17, 21, 22, 26) require external 0.22 µF capacitor connections to their correspondin; Thermal pad (PAD) is not part of standard 28-pin numbering but is critical for thermal management; m",+ "exposed pad 29 added from the footprint",+ "dropped thermal pad ['EP'] absent from footprint"+ ],+ "pages_sent": 38,+ "cost_usd": 0.3856,+ "at": "2026-09-24T10:17:41"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tpa3136d2",+ "pages": 38,+ "sha256": "5c11f426fed7ffaf",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 29,+ "described": 29,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}