TP4336

@@ -26,13 +26,15 @@       "model_3d_step": "tp4336.step",       "lbr": "tp4336.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C29075510"+    },     "pins": [       {         "number": "1",         "name": "VDD",         "type": "power_in",-        "description": "Charger power input. Recommended operating range 4.5-5.5 V (absolute max 6.5 V). Overvoltage protection trips at ~6.15 V and recovers below 5.85 V. Typically fed from a 5 V USB source through a small series resistor with a 2.2 µF decoupling capacitor to GND."+        "description": "Charger power input. Recommended operating range 4.5-5.5 V (absolute max 6.5 V). Overvoltage protection trips at ~6.15 V and recovers below 5.85 V. Typically fed from a 5 V USB source through a small series resistor with a 2.2 \u00b5F decoupling capacitor to GND."       },       {         "number": "2",@@ -62,19 +64,19 @@         "number": "6",         "name": "BAT",         "type": "power_out",-        "description": "Li-ion battery positive terminal. Sinks up to 1 A constant-current charge (10% trickle below 2.85 V) with 4.2 V float and 130 mV recharge hysteresis. Also sources current to the boost stage during discharge; UVLO releases boost above 3.1 V and terminates discharge below 2.8 V. Bypass with 10 µF close to the pin plus 10 µF near the inductor."+        "description": "Li-ion battery positive terminal. Sinks up to 1 A constant-current charge (10% trickle below 2.85 V) with 4.2 V float and 130 mV recharge hysteresis. Also sources current to the boost stage during discharge; UVLO releases boost above 3.1 V and terminates discharge below 2.8 V. Bypass with 10 \u00b5F close to the pin plus 10 \u00b5F near the inductor."       },       {         "number": "7",         "name": "SW",         "type": "power_out",-        "description": "Switching node of the synchronous boost converter (internal high-side and low-side power MOSFETs). Connects to an external 1.5 µH power inductor between BAT and SW. Operates at ~1 MHz with up to 90% duty cycle."+        "description": "Switching node of the synchronous boost converter (internal high-side and low-side power MOSFETs). Connects to an external 1.5 \u00b5H power inductor between BAT and SW. Operates at ~1 MHz with up to 90% duty cycle."       },       {         "number": "8",         "name": "OUT",         "type": "power_out",-        "description": "Synchronous boost output, regulated to 5.0 V at up to 1 A. Includes OVP at 5.25 V, OCP at 4.3 V with 8 ms delay, and short-circuit protection at 2.8 V with 500 µs delay (latched until load is removed or button pressed). Bypass with 2× 10 µF low-ESR ceramics close to the pin."+        "description": "Synchronous boost output, regulated to 5.0 V at up to 1 A. Includes OVP at 5.25 V, OCP at 4.3 V with 8 ms delay, and short-circuit protection at 2.8 V with 500 \u00b5s delay (latched until load is removed or button pressed). Bypass with 2\u00d7 10 \u00b5F low-ESR ceramics close to the pin."       },       {         "number": "9",

@@ -63,6 +63,18 @@   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1"/>   <smd name="9" x="0.0000" y="-0.0000" dx="2.4100" dy="3.3000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-2.6000" y="2.4700"/>+    <vertex x="-2.8400" y="2.8000"/>+    <vertex x="-2.3600" y="2.8000"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.9750" y="2.4500"/>+    <vertex x="1.9500" y="2.4500"/>+    <vertex x="1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="-2.4500"/>+    <vertex x="-1.9500" y="1.4750"/>+  </polygon>   <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="2.4650" x2="-2.0600" y2="2.5600" width="0.1200" layer="21"/>   <wire x1="-2.0600" y1="-2.5600" x2="-2.0600" y2="-2.4650" width="0.1200" layer="21"/>@@ -71,7 +83,7 @@   <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>   <text x="0" y="3.480" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-3.480" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-2.6000" y="2.4700"/><vertex x="-2.8400" y="2.8000"/><vertex x="-2.3600" y="2.8000"/></polygon></package>+</package> </packages> <symbols> <symbol name="TP4336">@@ -111,7 +123,13 @@         <connect gate="G$1" pin="SWT" pad="5"/>         <connect gate="G$1" pin="GND" pad="9"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="TP4336" constant="no"/>+          <attribute name="MANUFACTURER" value="TPOWER" constant="no"/>+          <attribute name="LCSC_PN" value="C29075510" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>