TNPW060331K2BEEA

@@ -1,59 +1,38 @@ # TNPW060331K2BEEA -Vishay TNPW e3 **31.2k ohm, ±0.1%, ±25 ppm/K**, nonpolar 0603 thin-film resistor. Candidate feedback component for [TMF8829 Depth Lab](https://wiki.adom.inc/adom/tmf8829-depth-lab). This is a component library in validation, not a qualified board or fabrication release.+**Vishay Intertech** · Chip Resistor - Surface Mount · 0603 -## Manufacturer originals+TNPW060331K2BEEA from Vishay Intertech, in a 0603. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD. -- [TNPW e3 datasheet](https://www.vishay.com/docs/28758/tnpw_e3.pdf), revision 10-Apr-2026: ordering codes on page 4, dimensions on page 15. B means ±0.1%, E means ±25 ppm/K, EA means lead-free 5000-piece reel packaging. Distributor cut-tape terms need confirmation before procurement.-- [Original STEP archive](https://www.vishay.com/docs/28967/tnpw_e3_3dmodels.zip), linked directly by that datasheet: member `TNPW_V_e3/TNPW_e3_0603.stp`. Unchanged manufacturer bytes are preserved. The shared family geometry applies to this 0603 variant.-- [Recommended lands](https://www.vishay.com/docs/28950/recsoldpaddims-drabeyresfus.pdf), revision 12-Jul-2022. Selected IPC reflow recommendation: pads 0.90 × 1.00 mm, centers X ±0.80 mm, inner gap 0.70 mm, outer span 2.50 mm. Factory profile validation remains open.+## Pinout -## Library construction and pose+| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |+| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. | -The symbol derives from KiCad Device:R_US, obtained through service-kicad (KiCad libraries CC-BY-SA 4.0 with the library exception). Exact MPN/value, footprint and manufacturer datasheet fields are added. Both pins are passive: 1→pad 1, 2→pad 2. The part is nonpolar; the silk dot is an assembly pad-1 cue.+## Key specifications -The footprint was authored with adom-footprint from the manufacturer's land dimensions. Its generated full silk rectangle crossed the pads, so the project derivative replaces it with top/bottom lines clear of copper. Original generator output is retained locally. The fab outline is 1.55 × 0.85 mm; the courtyard encloses the pads with 0.25 mm clearance.+| Parameter | Value |+|---|---|+| Manufacturer | Vishay Intertech |+| Package | 0603 |+| Category | Resistors |+| Pins | 2 | -OCCT read-back of the manufacturer STEP is X 0..0.85, Y 0..1.55, Z 0..0.45 mm. The canonical candidate pose rotates Z −90° then translates (−0.775,+0.425,0) mm to center the body along the footprint X axis with floor Z=0. Actual contact seating in native KiCad/Fusion/Altium is still pending. The GLB is an OCCT visualization derivative; it does not replace the original STEP. Virtual MPN marking remains to be added as a separate annotation derivative.+## CAD (KiCad official) -The adom-lbr JSON is canonical. KiCad exports are in `canonical-export/`, Fusion's complete deviceset is `TNPW060331K2BEEA.lbr`, and Altium libraries are in `exports/altium/`. Export success is not native application parity.+- Symbol: `TNPW060331K2BEEA`+- Footprint: `Resistor_SMD:R_0603_1608Metric`+- 3D model: 0603 (KiCad packages3D, STEP)+- 3D model files: `tnpw060331k2beea-etched.step` / `tnpw060331k2beea-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tnpw060331k2beea.step` / `tnpw060331k2beea.glb` are the bare package body. -## Sourcing snapshot+## Provenance -Parts Search on 9 September 2026: Mouser `71-TNPW060331K2BEEA` reports 4,593 stock at $0.26; its lead-time field is 154 Days. DigiKey reports 8,537 at $0.2600. Preferred available source for this snapshot: **Mouser**. Stock is not reserved; fulfillment and packaging are unconfirmed. No order was placed.+Data extracted from the manufacturer datasheet, not a distributor listing: -These precision parts are a documented exception to the Basic Parts preference: the current regulator/supervisor allocation is tighter than generic 1% parts after temperature and drift. This does not claim every possible stock-resistor network is unsuitable.+- **Datasheet:** [Vishay Intertech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590250497354596352) (15 pp, sha256 `e8dac2d71a582825`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0). --## 3D reference artwork--The derived display retains the source model geometry and materials, with a recorded rigid pose into Adom Z-up footprint coordinates. Nonphysical reference layers show teal dashed copper-pad boundaries at 50% opacity, silkscreen at 30% opacity, and signal names at 50% opacity. Labels follow the canonical pin-to-pad mapping. Unnamed nonpolarized passive connections are labeled “Terminal”; no polarity or signal function is invented. Original manufacturer STEP files remain unchanged.--Orbit underneath to compare contacts with copper boundaries. These are copper perimeters, not mask or paste apertures. Display artwork does not qualify native model seating, pin 1, electrical behavior or manufacture. The virtual MPN is applied through Adom Chip Laser at the chosen clear package surface described below. See `TNPW060331K2BEEA.adom-reference-v3.overlay.json` for source hashes, pose and layer metadata.---## MPN marking, source and license--**Mark location:** Center of resistor top, text width limited to 45 percent of package length to stay off metal terminations. The exact MPN is a virtual identification inlay generated by `adom-chip-laser`, not a claim about the manufacturer’s actual package marking. The physical source model and reference-artwork geometry remain unchanged.--The Source field links to the manufacturer/reference authority. Generation tools such as adom-lbr, adom-symbol, step2glb and Adom Chip Laser are recorded separately in artifact provenance. Original Adom-authored content defaults to the MIT open-source license; manufacturer and upstream assets retain their original terms and attribution. See [license scope](LICENSE-Adom.md). Native CAD parity and manufacturing qualification are separate checks.---## Cached chip artwork--These reusable chip previews and symbol outlines retain the reviewed Z-up pose and virtual MPN placement. Read the manifest before generating new artwork; compare its source hashes before reuse. Electrical and native model-seating qualification remain separate.--::adom-chip-thumbnail{src="/adom/tnpw060331k2beea/render/artwork/TNPW060331K2BEEA-thumbs.json"}--[Cache manifest and generation recipe](artwork/TNPW060331K2BEEA-thumbs.json) · [Original manufacturer STEP](TNPW_e3_0603.stp)---## Component LODs--Four board-use detail levels preserve the reviewed Z-up pose and real package terminals. High and medium retain the virtual MPN in its reviewed location. All four exclude the footprint outlines, pad labels and silkscreen used by the separate annotated wiki hero; the EDA board supplies those layers.--Cached PNG/WebP previews show each level without starting another 3D viewer. Choose **Turn on 3D preview** to inspect zoom-driven detail changes. Closing or hiding that preview releases its models and viewer resources. The manifest records source hashes, geometry estimates and review limits; display fidelity does not establish native seating or manufacturing qualification.--::adom-component-lod{src="/adom/tnpw060331k2beea/render/lod/manifest.json"}--[LOD manifest and reuse contract](lod/manifest.json)+[Datasheet PDF](docs/tnpw060331k2beea-datasheet.pdf)

@@ -0,0 +1,157 @@+{+  "slug": "tnpw060331k2beea",+  "version": "0.2.0",+  "type": "component",+  "description": "Vishay Intertech Chip Resistor - Surface Mount, 0603. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "resistors",+    "tnpw060331k2beea",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tnpw060331k2beea.kicad_sym",+    "tnpw060331k2beea.kicad_mod",+    "tnpw060331k2beea.glb",+    "tnpw060331k2beea.step",+    "tnpw060331k2beea.lbr",+    "docs/hero.png",+    "docs/tnpw060331k2beea-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "tnpw060331k2beea-hero.glb",+    "tnpw060331k2beea-hero.overlay.json"+  ],+  "component": {+    "mpn": "TNPW060331K2BEEA",+    "manufacturer": "Vishay Intertech",+    "package": "0603",+    "pin_count": 2,+    "category": "Resistors",+    "subcategory": "Chip Resistor - Surface Mount",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590250497354596352",+    "parts": {+      "symbol": "tnpw060331k2beea.kicad_sym",+      "footprint": "tnpw060331k2beea.kicad_mod",+      "model_3d": "tnpw060331k2beea-hero.glb",+      "model_3d_plain": "tnpw060331k2beea.glb",+      "model_3d_step": "tnpw060331k2beea-etched.step",+      "model_3d_step_plain": "tnpw060331k2beea.step",+      "lbr": "tnpw060331k2beea.lbr"+    },+    "distributor_links": {+      "lcsc": "C4212132",+      "digikey": "541-3650-2-ND",+      "mouser": "71-TNPW060331K2BEEA"+    },+    "distributor_check": {+      "checked_at": "2026-10-08T18:48:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "541-3650-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "71-TNPW060331K2BEEA",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1",+        "type": "passive",+        "description": "Terminal 1 of an unpolarised resistor; either orientation."+      },+      {+        "number": "2",+        "name": "2",+        "type": "passive",+        "description": "Terminal 2 of an unpolarised resistor; either orientation."+      }+    ],+    "provenance": {+      "extractor": "extract_pins",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins",+        "primary_model": "two-terminal convention",+        "primary_mode": "convention",+        "consensus_model": null,+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 15,+        "cost_usd": 0.1042,+        "at": "2026-10-08T18:47:54"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590250497354596352",+        "pages": 15,+        "sha256": "e8dac2d71a582825",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 2,+        "described": 2,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "tnpw060331k2beea.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          1.6,+          0.8,+          0.45+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "1875571c326d0d9e96f36b4efeb8094068ef7619f0a449c781caf0b49c2e5861",+        "checked": "2026-10-08",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tnpw060331k2beea-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          1.6,+          0.8,+          0.45+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2fe6b0f19ae124dfe797c84482403cf57009ea56aeafe8a4d725e0aa54d667e5",+        "checked": "2026-10-08",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}

@@ -1,30 +1,135 @@ {   "schema_version": 1,   "slug": "tnpw060331k2beea",-  "type": "hardware",+  "type": "component",   "kind": "component",   "title": "TNPW060331K2BEEA",   "brief": "Vishay 31.2k ohm 0.1% 25 ppm/K 0603 resistor; manufacturer STEP and design libraries, validation in progress.",-  "version": "0.1.0",-  "visibility": "private",+  "version": "0.2.0",+  "visibility": "public",   "component": {     "mpn": "TNPW060331K2BEEA",-    "manufacturer": "Vishay",+    "manufacturer": "Vishay Intertech",     "package": "0603",     "pin_count": 2,-    "category": "resistor",+    "category": "Resistors",+    "subcategory": "Chip Resistor - Surface Mount",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590250497354596352",     "parts": {-      "symbol": "canonical-export/TNPW060331K2BEEA.kicad_sym",-      "footprint": "canonical-export/TNPW060331K2BEEA.kicad_mod",-      "step": "TNPW_e3_0603.stp",-      "glb": "TNPW060331K2BEEA.adom-reference-marked-v4.glb",-      "model_3d": "TNPW060331K2BEEA.adom-reference-marked-v4.glb",-      "adom_lbr": "TNPW060331K2BEEA.adom-lbr.json",-      "datasheet": "tnpw-e3-datasheet.pdf"+      "symbol": "tnpw060331k2beea.kicad_sym",+      "footprint": "tnpw060331k2beea.kicad_mod",+      "model_3d": "tnpw060331k2beea-hero.glb",+      "model_3d_plain": "tnpw060331k2beea.glb",+      "model_3d_step": "tnpw060331k2beea-etched.step",+      "model_3d_step_plain": "tnpw060331k2beea.step",+      "lbr": "tnpw060331k2beea.lbr"     },     "distributor_links": {+      "lcsc": "C4212132",+      "digikey": "541-3650-2-ND",       "mouser": "71-TNPW060331K2BEEA"-    }+    },+    "distributor_check": {+      "checked_at": "2026-10-08T18:48:06Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "541-3650-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "71-TNPW060331K2BEEA",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1",+        "type": "passive",+        "description": "Terminal 1 of an unpolarised resistor; either orientation."+      },+      {+        "number": "2",+        "name": "2",+        "type": "passive",+        "description": "Terminal 2 of an unpolarised resistor; either orientation."+      }+    ],+    "provenance": {+      "extractor": "extract_pins",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins",+        "primary_model": "two-terminal convention",+        "primary_mode": "convention",+        "consensus_model": null,+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 15,+        "cost_usd": 0.1042,+        "at": "2026-10-08T18:47:54"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590250497354596352",+        "pages": 15,+        "sha256": "e8dac2d71a582825",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 2,+        "described": 2,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "tnpw060331k2beea.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          1.6,+          0.8,+          0.45+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "1875571c326d0d9e96f36b4efeb8094068ef7619f0a449c781caf0b49c2e5861",+        "checked": "2026-10-08",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tnpw060331k2beea-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          1.6,+          0.8,+          0.45+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "2fe6b0f19ae124dfe797c84482403cf57009ea56aeafe8a4d725e0aa54d667e5",+        "checked": "2026-10-08",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "source": {     "tool": "manufacturer",@@ -52,5 +157,34 @@       "widget": "adom-chip-thumbnail",       "reuse": "Verify source hashes and reuse the reviewed Z-up pose and surface-selected MPN placement."     }+  },+  "description": "Vishay Intertech Chip Resistor - Surface Mount, 0603. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "resistors",+    "tnpw060331k2beea",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "files": [+    "page.json",+    "README.md",+    "tnpw060331k2beea.kicad_sym",+    "tnpw060331k2beea.kicad_mod",+    "tnpw060331k2beea.glb",+    "tnpw060331k2beea.step",+    "tnpw060331k2beea.lbr",+    "docs/hero.png",+    "docs/tnpw060331k2beea-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html",+    "tnpw060331k2beea-hero.glb",+    "tnpw060331k2beea-hero.overlay.json"+  ],+  "org": "adom",+  "author": {+    "name": "John Lauer",+    "email": "[email protected]"   }-}+}\ No newline at end of file

@@ -0,0 +1,125 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "TNPW060331K2BEEA",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 2,+      "span_mm": 2.45,+      "dash_mm": 0.12,+      "gap_mm": 0.072,+      "pad_stroke_mm": 0.03+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 2,+      "pin1": null+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 2,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 2+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.25,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -0.8,+      0.8,+      -0.4,+      0.4+    ],+    "pads_bbox_mm": [+      -1.225,+      1.225,+      -0.475,+      0.475+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "tnpw060331k2beea.glb",+    "glb_sha256": "38a14ef2e18f32857e967bbfaaf464c4dd4091d3e673f46eaaf3079e5fa41ff4",+    "footprint": "tnpw060331k2beea.kicad_mod",+    "footprint_sha256": "7190ac4a00125b807e54129ef0d87d87f2a658eeb74d025a7028203419b09f23",+    "pins": "page.json component.pins",+    "pins_sha256": "f89b6cef1dd40bf094bc57ef23dc246a408922a81bfac75b8bc341584ea4e214"+  },+  "generator": "adom-wiki 1.7.69 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "1",+      "x": -1.365,+      "y": 0.0,+      "align": "right",+      "vertical": false,+      "h": 0.56+    },+    {+      "pad": "2",+      "text": "2",+      "x": 1.365,+      "y": 0.0,+      "align": "left",+      "vertical": false,+      "h": 0.56+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -0.825,+        0.0+      ],+      "size_mm": [+        0.8,+        0.95+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        0.825,+        0.0+      ],+      "size_mm": [+        0.8,+        0.95+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,112 @@+(footprint "R_0603_1608Metric"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf)")+	(tags "resistor")+	(property "Reference" "REF**"+		(at 0 -1.43 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "R_0603_1608Metric"+		(at 0 1.43 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "SMD_2terminal_chip_molded"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -0.237258 -0.5225)+		(end 0.237258 -0.5225)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -0.237258 0.5225)+		(end 0.237258 0.5225)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_rect+		(start -1.48 -0.73)+		(end 1.48 0.73)+		(stroke+			(width 0.05)+			(type solid)+		)+		(fill no)+		(layer "F.CrtYd")+	)+	(fp_rect+		(start -0.8 -0.4125)+		(end 0.8 0.4125)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 0.4 0.4)+				(thickness 0.06)+			)+		)+	)+	(pad "1" smd roundrect+		(at -0.825 0)+		(size 0.8 0.95)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at 0.825 0)+		(size 0.8 0.95)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0603_1608Metric.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+)

@@ -0,0 +1,100 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="R_0603_1608Metric">+  <description>2 pads, 2.5 x 0.9 mm. Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC-7351 nominal</description>+  <smd name="1" x="-0.8250" y="-0.0000" dx="0.8000" dy="0.9500" layer="1" roundness="50"/>+  <smd name="2" x="0.8250" y="-0.0000" dx="0.8000" dy="0.9500" layer="1" roundness="50"/>+  <wire x1="-0.8000" y1="0.4125" x2="0.8000" y2="0.4125" width="0.1000" layer="51"/>+  <wire x1="0.8000" y1="0.4125" x2="0.8000" y2="-0.4125" width="0.1000" layer="51"/>+  <wire x1="0.8000" y1="-0.4125" x2="-0.8000" y2="-0.4125" width="0.1000" layer="51"/>+  <wire x1="-0.8000" y1="-0.4125" x2="-0.8000" y2="0.4125" width="0.1000" layer="51"/>+  <wire x1="-0.2373" y1="0.5225" x2="0.2373" y2="0.5225" width="0.1200" layer="21"/>+  <wire x1="-0.2373" y1="-0.5225" x2="0.2373" y2="-0.5225" width="0.1200" layer="21"/>+  <text x="0" y="1.123" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-1.123" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="TNPW060331K2BEEA">+  <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+  <wire x1="12.7" y1="2.54" x2="12.7" y2="-2.54" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-2.54" x2="-12.7" y2="-2.54" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-2.54" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+  <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-5.0800" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="1" x="-17.78" y="0" length="middle" direction="pas"/>+  <pin name="2" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="TNPW060331K2BEEA" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="TNPW060331K2BEEA" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="R_0603_1608Metric">+      <connects>+        <connect gate="G$1" pin="1" pad="1"/>+        <connect gate="G$1" pin="2" pad="2"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,1049 @@+ISO-10303-21;+HEADER;+/* R_0603_1608Metric.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2018, kicad StepUp+ * + * This work is licensed under the [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode), + * with the following exception:+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be considered to be 'Adapted Material', + * then the copyright holder waives article 3 of the license with respect to these designs and any generated files which use data provided + * as part of the 'Licensed Material'.+ * You are free to use the library data in your own projects without the obligation to share your project files under this or any other license agreement.+ * However, if you wish to redistribute these libraries, or parts thereof (including in modified form) as a collection then the exception above does not apply. + * Please refer to https://github.com/KiCad/kicad-packages3D/blob/master/LICENSE.md for further clarification of the exception.+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * *USE 3D CAD DATA AT YOUR OWN RISK*+ * *DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.*+ * + */++FILE_DESCRIPTION(+/* description */ ('model of R_0603_1608Metric'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'R_0603_1608Metric.step',+/* time_stamp */ '2018-01-04T00:45:34',+/* author */ ('kicad StepUp','ksu'),+/* organization */ ('FreeCAD'),+/* preprocessor_version */ 'OCC',+/* originating_system */ 'kicad StepUp',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('R_0603_1608Metric','R_0603_1608Metric','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#805);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#57,#140,#165,#190,#257,#274,#291,#340,#357,+#374,#423,#440,#509,#540,#564,#633,#657,#674,#691,#708,#725,#742,+#759,#776,#793));+#17 = ADVANCED_FACE('',(#18),#52,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#30,#38,#46));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-0.8,-0.4,0.405));+#26 = LINE('',#27,#28);+#27 = CARTESIAN_POINT('',(-0.8,-0.4,0.));+#28 = VECTOR('',#29,1.);+#29 = DIRECTION('',(0.,0.,1.));+#30 = ORIENTED_EDGE('',*,*,#31,.T.);+#31 = EDGE_CURVE('',#22,#32,#34,.T.);+#32 = VERTEX_POINT('',#33);+#33 = CARTESIAN_POINT('',(-0.8,0.4,4.5E-02));+#34 = LINE('',#35,#36);+#35 = CARTESIAN_POINT('',(-0.8,-0.4,4.5E-02));+#36 = VECTOR('',#37,1.);+#37 = DIRECTION('',(0.,1.,0.));+#38 = ORIENTED_EDGE('',*,*,#39,.T.);+#39 = EDGE_CURVE('',#32,#40,#42,.T.);+#40 = VERTEX_POINT('',#41);+#41 = CARTESIAN_POINT('',(-0.8,0.4,0.405));+#42 = LINE('',#43,#44);+#43 = CARTESIAN_POINT('',(-0.8,0.4,0.));+#44 = VECTOR('',#45,1.);+#45 = DIRECTION('',(0.,0.,1.));+#46 = ORIENTED_EDGE('',*,*,#47,.F.);+#47 = EDGE_CURVE('',#24,#40,#48,.T.);+#48 = LINE('',#49,#50);+#49 = CARTESIAN_POINT('',(-0.8,-0.4,0.405));+#50 = VECTOR('',#51,1.);+#51 = DIRECTION('',(0.,1.,0.));+#52 = PLANE('',#53);+#53 = AXIS2_PLACEMENT_3D('',#54,#55,#56);+#54 = CARTESIAN_POINT('',(-0.8,-0.4,0.));+#55 = DIRECTION('',(1.,0.,0.));+#56 = DIRECTION('',(0.,0.,1.));+#57 = ADVANCED_FACE('',(#58),#135,.F.);+#58 = FACE_BOUND('',#59,.F.);+#59 = EDGE_LOOP('',(#60,#70,#77,#78,#87,#95,#104,#112,#120,#128));+#60 = ORIENTED_EDGE('',*,*,#61,.F.);+#61 = EDGE_CURVE('',#62,#64,#66,.T.);+#62 = VERTEX_POINT('',#63);+#63 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17));+#64 = VERTEX_POINT('',#65);+#65 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17));+#66 = LINE('',#67,#68);+#67 = CARTESIAN_POINT('',(-0.8,-0.4,0.));+#68 = VECTOR('',#69,1.);+#69 = DIRECTION('',(1.,0.,0.));+#70 = ORIENTED_EDGE('',*,*,#71,.F.);+#71 = EDGE_CURVE('',#22,#62,#72,.T.);+#72 = CIRCLE('',#73,4.5E-02);+#73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);+#74 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#75 = DIRECTION('',(0.,-1.,0.));+#76 = DIRECTION('',(0.,0.,1.));+#77 = ORIENTED_EDGE('',*,*,#21,.T.);+#78 = ORIENTED_EDGE('',*,*,#79,.T.);+#79 = EDGE_CURVE('',#24,#80,#82,.T.);+#80 = VERTEX_POINT('',#81);+#81 = CARTESIAN_POINT('',(-0.755,-0.4,0.45));+#82 = CIRCLE('',#83,4.5E-02);+#83 = AXIS2_PLACEMENT_3D('',#84,#85,#86);+#84 = CARTESIAN_POINT('',(-0.755,-0.4,0.405));+#85 = DIRECTION('',(0.,1.,0.));+#86 = DIRECTION('',(0.,0.,1.));+#87 = ORIENTED_EDGE('',*,*,#88,.T.);+#88 = EDGE_CURVE('',#80,#89,#91,.T.);+#89 = VERTEX_POINT('',#90);+#90 = CARTESIAN_POINT('',(-0.545,-0.4,0.45));+#91 = LINE('',#92,#93);+#92 = CARTESIAN_POINT('',(-0.8,-0.4,0.45));+#93 = VECTOR('',#94,1.);+#94 = DIRECTION('',(1.,0.,0.));+#95 = ORIENTED_EDGE('',*,*,#96,.F.);+#96 = EDGE_CURVE('',#97,#89,#99,.T.);+#97 = VERTEX_POINT('',#98);+#98 = CARTESIAN_POINT('',(-0.5,-0.4,0.405));+#99 = CIRCLE('',#100,4.5E-02);+#100 = AXIS2_PLACEMENT_3D('',#101,#102,#103);+#101 = CARTESIAN_POINT('',(-0.545,-0.4,0.405));+#102 = DIRECTION('',(0.,-1.,0.));+#103 = DIRECTION('',(0.,0.,1.));+#104 = ORIENTED_EDGE('',*,*,#105,.F.);+#105 = EDGE_CURVE('',#106,#97,#108,.T.);+#106 = VERTEX_POINT('',#107);+#107 = CARTESIAN_POINT('',(-0.755,-0.4,0.405));+#108 = LINE('',#109,#110);+#109 = CARTESIAN_POINT('',(-0.755,-0.4,0.405));+#110 = VECTOR('',#111,1.);+#111 = DIRECTION('',(1.,0.,0.));+#112 = ORIENTED_EDGE('',*,*,#113,.F.);+#113 = EDGE_CURVE('',#114,#106,#116,.T.);+#114 = VERTEX_POINT('',#115);+#115 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#116 = LINE('',#117,#118);+#117 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#118 = VECTOR('',#119,1.);+#119 = DIRECTION('',(0.,0.,1.));+#120 = ORIENTED_EDGE('',*,*,#121,.T.);+#121 = EDGE_CURVE('',#114,#122,#124,.T.);+#122 = VERTEX_POINT('',#123);+#123 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02));+#124 = LINE('',#125,#126);+#125 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#126 = VECTOR('',#127,1.);+#127 = DIRECTION('',(1.,0.,0.));+#128 = ORIENTED_EDGE('',*,*,#129,.T.);+#129 = EDGE_CURVE('',#122,#64,#130,.T.);+#130 = CIRCLE('',#131,4.5E-02);+#131 = AXIS2_PLACEMENT_3D('',#132,#133,#134);+#132 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02));+#133 = DIRECTION('',(0.,1.,0.));+#134 = DIRECTION('',(0.,0.,1.));+#135 = PLANE('',#136);+#136 = AXIS2_PLACEMENT_3D('',#137,#138,#139);+#137 = CARTESIAN_POINT('',(-0.8,-0.4,0.));+#138 = DIRECTION('',(0.,1.,0.));+#139 = DIRECTION('',(0.,0.,1.));+#140 = ADVANCED_FACE('',(#141),#160,.T.);+#141 = FACE_BOUND('',#142,.F.);+#142 = EDGE_LOOP('',(#143,#144,#152,#159));+#143 = ORIENTED_EDGE('',*,*,#71,.T.);+#144 = ORIENTED_EDGE('',*,*,#145,.T.);+#145 = EDGE_CURVE('',#62,#146,#148,.T.);+#146 = VERTEX_POINT('',#147);+#147 = CARTESIAN_POINT('',(-0.755,0.4,-2.775557561563E-17));+#148 = LINE('',#149,#150);+#149 = CARTESIAN_POINT('',(-0.755,-0.4,-2.775557561563E-17));+#150 = VECTOR('',#151,1.);+#151 = DIRECTION('',(0.,1.,0.));+#152 = ORIENTED_EDGE('',*,*,#153,.F.);+#153 = EDGE_CURVE('',#32,#146,#154,.T.);+#154 = CIRCLE('',#155,4.5E-02);+#155 = AXIS2_PLACEMENT_3D('',#156,#157,#158);+#156 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02));+#157 = DIRECTION('',(0.,-1.,0.));+#158 = DIRECTION('',(0.,0.,1.));+#159 = ORIENTED_EDGE('',*,*,#31,.F.);+#160 = CYLINDRICAL_SURFACE('',#161,4.5E-02);+#161 = AXIS2_PLACEMENT_3D('',#162,#163,#164);+#162 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#163 = DIRECTION('',(0.,1.,0.));+#164 = DIRECTION('',(-1.,0.,0.));+#165 = ADVANCED_FACE('',(#166),#185,.T.);+#166 = FACE_BOUND('',#167,.T.);+#167 = EDGE_LOOP('',(#168,#169,#177,#184));+#168 = ORIENTED_EDGE('',*,*,#79,.T.);+#169 = ORIENTED_EDGE('',*,*,#170,.T.);+#170 = EDGE_CURVE('',#80,#171,#173,.T.);+#171 = VERTEX_POINT('',#172);+#172 = CARTESIAN_POINT('',(-0.755,0.4,0.45));+#173 = LINE('',#174,#175);+#174 = CARTESIAN_POINT('',(-0.755,-0.4,0.45));+#175 = VECTOR('',#176,1.);+#176 = DIRECTION('',(0.,1.,0.));+#177 = ORIENTED_EDGE('',*,*,#178,.F.);+#178 = EDGE_CURVE('',#40,#171,#179,.T.);+#179 = CIRCLE('',#180,4.5E-02);+#180 = AXIS2_PLACEMENT_3D('',#181,#182,#183);+#181 = CARTESIAN_POINT('',(-0.755,0.4,0.405));+#182 = DIRECTION('',(0.,1.,0.));+#183 = DIRECTION('',(0.,0.,1.));+#184 = ORIENTED_EDGE('',*,*,#47,.F.);+#185 = CYLINDRICAL_SURFACE('',#186,4.5E-02);+#186 = AXIS2_PLACEMENT_3D('',#187,#188,#189);+#187 = CARTESIAN_POINT('',(-0.755,-0.4,0.405));+#188 = DIRECTION('',(0.,1.,0.));+#189 = DIRECTION('',(-1.,0.,0.));+#190 = ADVANCED_FACE('',(#191),#252,.T.);+#191 = FACE_BOUND('',#192,.T.);+#192 = EDGE_LOOP('',(#193,#201,#202,#203,#204,#212,#221,#229,#237,#245)+);+#193 = ORIENTED_EDGE('',*,*,#194,.F.);+#194 = EDGE_CURVE('',#146,#195,#197,.T.);+#195 = VERTEX_POINT('',#196);+#196 = CARTESIAN_POINT('',(-0.545,0.4,-2.775557561563E-17));+#197 = LINE('',#198,#199);+#198 = CARTESIAN_POINT('',(-0.8,0.4,0.));+#199 = VECTOR('',#200,1.);+#200 = DIRECTION('',(1.,0.,0.));+#201 = ORIENTED_EDGE('',*,*,#153,.F.);+#202 = ORIENTED_EDGE('',*,*,#39,.T.);+#203 = ORIENTED_EDGE('',*,*,#178,.T.);+#204 = ORIENTED_EDGE('',*,*,#205,.T.);+#205 = EDGE_CURVE('',#171,#206,#208,.T.);+#206 = VERTEX_POINT('',#207);+#207 = CARTESIAN_POINT('',(-0.545,0.4,0.45));+#208 = LINE('',#209,#210);+#209 = CARTESIAN_POINT('',(-0.8,0.4,0.45));+#210 = VECTOR('',#211,1.);+#211 = DIRECTION('',(1.,0.,0.));+#212 = ORIENTED_EDGE('',*,*,#213,.F.);+#213 = EDGE_CURVE('',#214,#206,#216,.T.);+#214 = VERTEX_POINT('',#215);+#215 = CARTESIAN_POINT('',(-0.5,0.4,0.405));+#216 = CIRCLE('',#217,4.5E-02);+#217 = AXIS2_PLACEMENT_3D('',#218,#219,#220);+#218 = CARTESIAN_POINT('',(-0.545,0.4,0.405));+#219 = DIRECTION('',(0.,-1.,0.));+#220 = DIRECTION('',(0.,0.,1.));+#221 = ORIENTED_EDGE('',*,*,#222,.F.);+#222 = EDGE_CURVE('',#223,#214,#225,.T.);+#223 = VERTEX_POINT('',#224);+#224 = CARTESIAN_POINT('',(-0.755,0.4,0.405));+#225 = LINE('',#226,#227);+#226 = CARTESIAN_POINT('',(-0.755,0.4,0.405));+#227 = VECTOR('',#228,1.);+#228 = DIRECTION('',(1.,0.,0.));+#229 = ORIENTED_EDGE('',*,*,#230,.F.);+#230 = EDGE_CURVE('',#231,#223,#233,.T.);+#231 = VERTEX_POINT('',#232);+#232 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02));+#233 = LINE('',#234,#235);+#234 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02));+#235 = VECTOR('',#236,1.);+#236 = DIRECTION('',(0.,0.,1.));+#237 = ORIENTED_EDGE('',*,*,#238,.T.);+#238 = EDGE_CURVE('',#231,#239,#241,.T.);+#239 = VERTEX_POINT('',#240);+#240 = CARTESIAN_POINT('',(-0.5,0.4,4.5E-02));+#241 = LINE('',#242,#243);+#242 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02));+#243 = VECTOR('',#244,1.);+#244 = DIRECTION('',(1.,0.,0.));+#245 = ORIENTED_EDGE('',*,*,#246,.T.);+#246 = EDGE_CURVE('',#239,#195,#247,.T.);+#247 = CIRCLE('',#248,4.5E-02);+#248 = AXIS2_PLACEMENT_3D('',#249,#250,#251);+#249 = CARTESIAN_POINT('',(-0.545,0.4,4.5E-02));+#250 = DIRECTION('',(0.,1.,0.));+#251 = DIRECTION('',(0.,0.,1.));+#252 = PLANE('',#253);+#253 = AXIS2_PLACEMENT_3D('',#254,#255,#256);+#254 = CARTESIAN_POINT('',(-0.8,0.4,0.));+#255 = DIRECTION('',(0.,1.,0.));+#256 = DIRECTION('',(0.,0.,1.));+#257 = ADVANCED_FACE('',(#258),#269,.F.);+#258 = FACE_BOUND('',#259,.F.);+#259 = EDGE_LOOP('',(#260,#261,#262,#263));+#260 = ORIENTED_EDGE('',*,*,#194,.F.);+#261 = ORIENTED_EDGE('',*,*,#145,.F.);+#262 = ORIENTED_EDGE('',*,*,#61,.T.);+#263 = ORIENTED_EDGE('',*,*,#264,.T.);+#264 = EDGE_CURVE('',#64,#195,#265,.T.);+#265 = LINE('',#266,#267);+#266 = CARTESIAN_POINT('',(-0.545,-0.4,-2.775557561563E-17));+#267 = VECTOR('',#268,1.);+#268 = DIRECTION('',(0.,1.,0.));+#269 = PLANE('',#270);+#270 = AXIS2_PLACEMENT_3D('',#271,#272,#273);+#271 = CARTESIAN_POINT('',(-0.8,-0.4,0.));+#272 = DIRECTION('',(0.,0.,1.));+#273 = DIRECTION('',(1.,0.,0.));+#274 = ADVANCED_FACE('',(#275),#286,.T.);+#275 = FACE_BOUND('',#276,.T.);+#276 = EDGE_LOOP('',(#277,#278,#279,#280));+#277 = ORIENTED_EDGE('',*,*,#129,.T.);+#278 = ORIENTED_EDGE('',*,*,#264,.T.);+#279 = ORIENTED_EDGE('',*,*,#246,.F.);+#280 = ORIENTED_EDGE('',*,*,#281,.F.);+#281 = EDGE_CURVE('',#122,#239,#282,.T.);+#282 = LINE('',#283,#284);+#283 = CARTESIAN_POINT('',(-0.5,-0.4,4.5E-02));+#284 = VECTOR('',#285,1.);+#285 = DIRECTION('',(0.,1.,0.));+#286 = CYLINDRICAL_SURFACE('',#287,4.5E-02);+#287 = AXIS2_PLACEMENT_3D('',#288,#289,#290);+#288 = CARTESIAN_POINT('',(-0.545,-0.4,4.5E-02));+#289 = DIRECTION('',(0.,1.,0.));+#290 = DIRECTION('',(1.,0.,0.));+#291 = ADVANCED_FACE('',(#292),#335,.F.);+#292 = FACE_BOUND('',#293,.F.);+#293 = EDGE_LOOP('',(#294,#295,#296,#297,#305,#313,#321,#329));+#294 = ORIENTED_EDGE('',*,*,#121,.F.);+#295 = ORIENTED_EDGE('',*,*,#113,.T.);+#296 = ORIENTED_EDGE('',*,*,#105,.T.);+#297 = ORIENTED_EDGE('',*,*,#298,.T.);+#298 = EDGE_CURVE('',#97,#299,#301,.T.);+#299 = VERTEX_POINT('',#300);+#300 = CARTESIAN_POINT('',(0.5,-0.4,0.405));+#301 = LINE('',#302,#303);+#302 = CARTESIAN_POINT('',(-0.5,-0.4,0.405));+#303 = VECTOR('',#304,1.);+#304 = DIRECTION('',(1.,0.,0.));+#305 = ORIENTED_EDGE('',*,*,#306,.T.);+#306 = EDGE_CURVE('',#299,#307,#309,.T.);+#307 = VERTEX_POINT('',#308);+#308 = CARTESIAN_POINT('',(0.755,-0.4,0.405));+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(-0.755,-0.4,0.405));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(1.,0.,0.));+#313 = ORIENTED_EDGE('',*,*,#314,.F.);+#314 = EDGE_CURVE('',#315,#307,#317,.T.);+#315 = VERTEX_POINT('',#316);+#316 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02));+#317 = LINE('',#318,#319);+#318 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02));+#319 = VECTOR('',#320,1.);+#320 = DIRECTION('',(0.,0.,1.));+#321 = ORIENTED_EDGE('',*,*,#322,.F.);+#322 = EDGE_CURVE('',#323,#315,#325,.T.);+#323 = VERTEX_POINT('',#324);+#324 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02));+#325 = LINE('',#326,#327);+#326 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#327 = VECTOR('',#328,1.);+#328 = DIRECTION('',(1.,0.,0.));+#329 = ORIENTED_EDGE('',*,*,#330,.F.);+#330 = EDGE_CURVE('',#122,#323,#331,.T.);+#331 = LINE('',#332,#333);+#332 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#333 = VECTOR('',#334,1.);+#334 = DIRECTION('',(1.,0.,0.));+#335 = PLANE('',#336);+#336 = AXIS2_PLACEMENT_3D('',#337,#338,#339);+#337 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#338 = DIRECTION('',(0.,1.,0.));+#339 = DIRECTION('',(0.,0.,1.));+#340 = ADVANCED_FACE('',(#341),#352,.T.);+#341 = FACE_BOUND('',#342,.T.);+#342 = EDGE_LOOP('',(#343,#344,#345,#346));+#343 = ORIENTED_EDGE('',*,*,#205,.F.);+#344 = ORIENTED_EDGE('',*,*,#170,.F.);+#345 = ORIENTED_EDGE('',*,*,#88,.T.);+#346 = ORIENTED_EDGE('',*,*,#347,.T.);+#347 = EDGE_CURVE('',#89,#206,#348,.T.);+#348 = LINE('',#349,#350);+#349 = CARTESIAN_POINT('',(-0.545,-0.4,0.45));+#350 = VECTOR('',#351,1.);+#351 = DIRECTION('',(0.,1.,0.));+#352 = PLANE('',#353);+#353 = AXIS2_PLACEMENT_3D('',#354,#355,#356);+#354 = CARTESIAN_POINT('',(-0.8,-0.4,0.45));+#355 = DIRECTION('',(0.,0.,1.));+#356 = DIRECTION('',(1.,0.,0.));+#357 = ADVANCED_FACE('',(#358),#369,.T.);+#358 = FACE_BOUND('',#359,.F.);+#359 = EDGE_LOOP('',(#360,#361,#362,#363));+#360 = ORIENTED_EDGE('',*,*,#96,.T.);+#361 = ORIENTED_EDGE('',*,*,#347,.T.);+#362 = ORIENTED_EDGE('',*,*,#213,.F.);+#363 = ORIENTED_EDGE('',*,*,#364,.F.);+#364 = EDGE_CURVE('',#97,#214,#365,.T.);+#365 = LINE('',#366,#367);+#366 = CARTESIAN_POINT('',(-0.5,-0.4,0.405));+#367 = VECTOR('',#368,1.);+#368 = DIRECTION('',(0.,1.,0.));+#369 = CYLINDRICAL_SURFACE('',#370,4.5E-02);+#370 = AXIS2_PLACEMENT_3D('',#371,#372,#373);+#371 = CARTESIAN_POINT('',(-0.545,-0.4,0.405));+#372 = DIRECTION('',(0.,1.,0.));+#373 = DIRECTION('',(1.,0.,0.));+#374 = ADVANCED_FACE('',(#375),#418,.T.);+#375 = FACE_BOUND('',#376,.T.);+#376 = EDGE_LOOP('',(#377,#378,#379,#380,#388,#396,#404,#412));+#377 = ORIENTED_EDGE('',*,*,#238,.F.);+#378 = ORIENTED_EDGE('',*,*,#230,.T.);+#379 = ORIENTED_EDGE('',*,*,#222,.T.);+#380 = ORIENTED_EDGE('',*,*,#381,.T.);+#381 = EDGE_CURVE('',#214,#382,#384,.T.);+#382 = VERTEX_POINT('',#383);+#383 = CARTESIAN_POINT('',(0.5,0.4,0.405));+#384 = LINE('',#385,#386);+#385 = CARTESIAN_POINT('',(-0.5,0.4,0.405));+#386 = VECTOR('',#387,1.);+#387 = DIRECTION('',(1.,0.,0.));+#388 = ORIENTED_EDGE('',*,*,#389,.T.);+#389 = EDGE_CURVE('',#382,#390,#392,.T.);+#390 = VERTEX_POINT('',#391);+#391 = CARTESIAN_POINT('',(0.755,0.4,0.405));+#392 = LINE('',#393,#394);+#393 = CARTESIAN_POINT('',(-0.755,0.4,0.405));+#394 = VECTOR('',#395,1.);+#395 = DIRECTION('',(1.,0.,0.));+#396 = ORIENTED_EDGE('',*,*,#397,.F.);+#397 = EDGE_CURVE('',#398,#390,#400,.T.);+#398 = VERTEX_POINT('',#399);+#399 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02));+#400 = LINE('',#401,#402);+#401 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02));+#402 = VECTOR('',#403,1.);+#403 = DIRECTION('',(0.,0.,1.));+#404 = ORIENTED_EDGE('',*,*,#405,.F.);+#405 = EDGE_CURVE('',#406,#398,#408,.T.);+#406 = VERTEX_POINT('',#407);+#407 = CARTESIAN_POINT('',(0.5,0.4,4.5E-02));+#408 = LINE('',#409,#410);+#409 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02));+#410 = VECTOR('',#411,1.);+#411 = DIRECTION('',(1.,0.,0.));+#412 = ORIENTED_EDGE('',*,*,#413,.F.);+#413 = EDGE_CURVE('',#239,#406,#414,.T.);+#414 = LINE('',#415,#416);+#415 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02));+#416 = VECTOR('',#417,1.);+#417 = DIRECTION('',(1.,0.,0.));+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(-0.755,0.4,4.5E-02));+#421 = DIRECTION('',(0.,1.,0.));+#422 = DIRECTION('',(0.,0.,1.));+#423 = ADVANCED_FACE('',(#424),#435,.F.);+#424 = FACE_BOUND('',#425,.F.);+#425 = EDGE_LOOP('',(#426,#427,#428,#434));+#426 = ORIENTED_EDGE('',*,*,#281,.F.);+#427 = ORIENTED_EDGE('',*,*,#330,.T.);+#428 = ORIENTED_EDGE('',*,*,#429,.T.);+#429 = EDGE_CURVE('',#323,#406,#430,.T.);+#430 = LINE('',#431,#432);+#431 = CARTESIAN_POINT('',(0.5,-0.4,4.5E-02));+#432 = VECTOR('',#433,1.);+#433 = DIRECTION('',(0.,1.,0.));+#434 = ORIENTED_EDGE('',*,*,#413,.F.);+#435 = PLANE('',#436);+#436 = AXIS2_PLACEMENT_3D('',#437,#438,#439);+#437 = CARTESIAN_POINT('',(-0.755,-0.4,4.5E-02));+#438 = DIRECTION('',(0.,0.,1.));+#439 = DIRECTION('',(1.,0.,0.));+#440 = ADVANCED_FACE('',(#441),#504,.F.);+#441 = FACE_BOUND('',#442,.F.);+#442 = EDGE_LOOP('',(#443,#453,#460,#461,#462,#463,#472,#480,#489,#497)+);+#443 = ORIENTED_EDGE('',*,*,#444,.F.);+#444 = EDGE_CURVE('',#445,#447,#449,.T.);+#445 = VERTEX_POINT('',#446);+#446 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17));+#447 = VERTEX_POINT('',#448);+#448 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17));+#449 = LINE('',#450,#451);+#450 = CARTESIAN_POINT('',(0.5,-0.4,0.));+#451 = VECTOR('',#452,1.);+#452 = DIRECTION('',(1.,0.,0.));+#453 = ORIENTED_EDGE('',*,*,#454,.F.);+#454 = EDGE_CURVE('',#323,#445,#455,.T.);+#455 = CIRCLE('',#456,4.5E-02);+#456 = AXIS2_PLACEMENT_3D('',#457,#458,#459);+#457 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02));+#458 = DIRECTION('',(0.,-1.,0.));+#459 = DIRECTION('',(0.,0.,1.));+#460 = ORIENTED_EDGE('',*,*,#322,.T.);+#461 = ORIENTED_EDGE('',*,*,#314,.T.);+#462 = ORIENTED_EDGE('',*,*,#306,.F.);+#463 = ORIENTED_EDGE('',*,*,#464,.T.);+#464 = EDGE_CURVE('',#299,#465,#467,.T.);+#465 = VERTEX_POINT('',#466);+#466 = CARTESIAN_POINT('',(0.545,-0.4,0.45));+#467 = CIRCLE('',#468,4.5E-02);+#468 = AXIS2_PLACEMENT_3D('',#469,#470,#471);+#469 = CARTESIAN_POINT('',(0.545,-0.4,0.405));+#470 = DIRECTION('',(0.,1.,0.));+#471 = DIRECTION('',(0.,0.,1.));+#472 = ORIENTED_EDGE('',*,*,#473,.T.);+#473 = EDGE_CURVE('',#465,#474,#476,.T.);+#474 = VERTEX_POINT('',#475);+#475 = CARTESIAN_POINT('',(0.755,-0.4,0.45));+#476 = LINE('',#477,#478);+#477 = CARTESIAN_POINT('',(0.5,-0.4,0.45));+#478 = VECTOR('',#479,1.);+#479 = DIRECTION('',(1.,0.,0.));+#480 = ORIENTED_EDGE('',*,*,#481,.F.);+#481 = EDGE_CURVE('',#482,#474,#484,.T.);+#482 = VERTEX_POINT('',#483);+#483 = CARTESIAN_POINT('',(0.8,-0.4,0.405));+#484 = CIRCLE('',#485,4.5E-02);+#485 = AXIS2_PLACEMENT_3D('',#486,#487,#488);+#486 = CARTESIAN_POINT('',(0.755,-0.4,0.405));+#487 = DIRECTION('',(0.,-1.,0.));+#488 = DIRECTION('',(0.,0.,1.));+#489 = ORIENTED_EDGE('',*,*,#490,.F.);+#490 = EDGE_CURVE('',#491,#482,#493,.T.);+#491 = VERTEX_POINT('',#492);+#492 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02));+#493 = LINE('',#494,#495);+#494 = CARTESIAN_POINT('',(0.8,-0.4,0.));+#495 = VECTOR('',#496,1.);+#496 = DIRECTION('',(0.,0.,1.));+#497 = ORIENTED_EDGE('',*,*,#498,.T.);+#498 = EDGE_CURVE('',#491,#447,#499,.T.);+#499 = CIRCLE('',#500,4.5E-02);+#500 = AXIS2_PLACEMENT_3D('',#501,#502,#503);+#501 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02));+#502 = DIRECTION('',(0.,1.,0.));+#503 = DIRECTION('',(0.,0.,1.));+#504 = PLANE('',#505);+#505 = AXIS2_PLACEMENT_3D('',#506,#507,#508);+#506 = CARTESIAN_POINT('',(0.5,-0.4,0.));+#507 = DIRECTION('',(0.,1.,0.));+#508 = DIRECTION('',(0.,0.,1.));+#509 = ADVANCED_FACE('',(#510),#535,.F.);+#510 = FACE_BOUND('',#511,.F.);+#511 = EDGE_LOOP('',(#512,#513,#521,#529));+#512 = ORIENTED_EDGE('',*,*,#298,.F.);+#513 = ORIENTED_EDGE('',*,*,#514,.T.);+#514 = EDGE_CURVE('',#97,#515,#517,.T.);+#515 = VERTEX_POINT('',#516);+#516 = CARTESIAN_POINT('',(-0.5,-0.4,0.45));+#517 = LINE('',#518,#519);+#518 = CARTESIAN_POINT('',(-0.5,-0.4,0.405));+#519 = VECTOR('',#520,1.);+#520 = DIRECTION('',(0.,0.,1.));+#521 = ORIENTED_EDGE('',*,*,#522,.T.);+#522 = EDGE_CURVE('',#515,#523,#525,.T.);+#523 = VERTEX_POINT('',#524);+#524 = CARTESIAN_POINT('',(0.5,-0.4,0.45));+#525 = LINE('',#526,#527);+#526 = CARTESIAN_POINT('',(-0.5,-0.4,0.45));+#527 = VECTOR('',#528,1.);+#528 = DIRECTION('',(1.,0.,0.));+#529 = ORIENTED_EDGE('',*,*,#530,.F.);+#530 = EDGE_CURVE('',#299,#523,#531,.T.);+#531 = LINE('',#532,#533);+#532 = CARTESIAN_POINT('',(0.5,-0.4,0.405));+#533 = VECTOR('',#534,1.);+#534 = DIRECTION('',(0.,0.,1.));+#535 = PLANE('',#536);+#536 = AXIS2_PLACEMENT_3D('',#537,#538,#539);+#537 = CARTESIAN_POINT('',(-0.5,-0.4,0.405));+#538 = DIRECTION('',(0.,1.,0.));+#539 = DIRECTION('',(0.,0.,1.));+#540 = ADVANCED_FACE('',(#541),#559,.F.);+#541 = FACE_BOUND('',#542,.F.);+#542 = EDGE_LOOP('',(#543,#544,#545,#553));+#543 = ORIENTED_EDGE('',*,*,#514,.F.);+#544 = ORIENTED_EDGE('',*,*,#364,.T.);+#545 = ORIENTED_EDGE('',*,*,#546,.T.);+#546 = EDGE_CURVE('',#214,#547,#549,.T.);+#547 = VERTEX_POINT('',#548);+#548 = CARTESIAN_POINT('',(-0.5,0.4,0.45));+#549 = LINE('',#550,#551);+#550 = CARTESIAN_POINT('',(-0.5,0.4,0.405));+#551 = VECTOR('',#552,1.);+#552 = DIRECTION('',(0.,0.,1.));+#553 = ORIENTED_EDGE('',*,*,#554,.F.);+#554 = EDGE_CURVE('',#515,#547,#555,.T.);+#555 = LINE('',#556,#557);+#556 = CARTESIAN_POINT('',(-0.5,-0.4,0.45));+#557 = VECTOR('',#558,1.);+#558 = DIRECTION('',(0.,1.,0.));+#559 = PLANE('',#560);+#560 = AXIS2_PLACEMENT_3D('',#561,#562,#563);+#561 = CARTESIAN_POINT('',(-0.5,-0.4,0.405));+#562 = DIRECTION('',(1.,0.,0.));+#563 = DIRECTION('',(0.,0.,1.));+#564 = ADVANCED_FACE('',(#565),#628,.T.);+#565 = FACE_BOUND('',#566,.T.);+#566 = EDGE_LOOP('',(#567,#577,#584,#585,#586,#587,#596,#604,#613,#621)+);+#567 = ORIENTED_EDGE('',*,*,#568,.F.);+#568 = EDGE_CURVE('',#569,#571,#573,.T.);+#569 = VERTEX_POINT('',#570);+#570 = CARTESIAN_POINT('',(0.545,0.4,-2.775557561563E-17));+#571 = VERTEX_POINT('',#572);+#572 = CARTESIAN_POINT('',(0.755,0.4,-2.775557561563E-17));+#573 = LINE('',#574,#575);+#574 = CARTESIAN_POINT('',(0.5,0.4,0.));+#575 = VECTOR('',#576,1.);+#576 = DIRECTION('',(1.,0.,0.));+#577 = ORIENTED_EDGE('',*,*,#578,.F.);+#578 = EDGE_CURVE('',#406,#569,#579,.T.);+#579 = CIRCLE('',#580,4.5E-02);+#580 = AXIS2_PLACEMENT_3D('',#581,#582,#583);+#581 = CARTESIAN_POINT('',(0.545,0.4,4.5E-02));+#582 = DIRECTION('',(0.,-1.,0.));+#583 = DIRECTION('',(0.,0.,1.));+#584 = ORIENTED_EDGE('',*,*,#405,.T.);+#585 = ORIENTED_EDGE('',*,*,#397,.T.);+#586 = ORIENTED_EDGE('',*,*,#389,.F.);+#587 = ORIENTED_EDGE('',*,*,#588,.T.);+#588 = EDGE_CURVE('',#382,#589,#591,.T.);+#589 = VERTEX_POINT('',#590);+#590 = CARTESIAN_POINT('',(0.545,0.4,0.45));+#591 = CIRCLE('',#592,4.5E-02);+#592 = AXIS2_PLACEMENT_3D('',#593,#594,#595);+#593 = CARTESIAN_POINT('',(0.545,0.4,0.405));+#594 = DIRECTION('',(0.,1.,0.));+#595 = DIRECTION('',(0.,0.,1.));+#596 = ORIENTED_EDGE('',*,*,#597,.T.);+#597 = EDGE_CURVE('',#589,#598,#600,.T.);+#598 = VERTEX_POINT('',#599);+#599 = CARTESIAN_POINT('',(0.755,0.4,0.45));+#600 = LINE('',#601,#602);+#601 = CARTESIAN_POINT('',(0.5,0.4,0.45));+#602 = VECTOR('',#603,1.);+#603 = DIRECTION('',(1.,0.,0.));+#604 = ORIENTED_EDGE('',*,*,#605,.F.);+#605 = EDGE_CURVE('',#606,#598,#608,.T.);+#606 = VERTEX_POINT('',#607);+#607 = CARTESIAN_POINT('',(0.8,0.4,0.405));+#608 = CIRCLE('',#609,4.5E-02);+#609 = AXIS2_PLACEMENT_3D('',#610,#611,#612);+#610 = CARTESIAN_POINT('',(0.755,0.4,0.405));+#611 = DIRECTION('',(0.,-1.,0.));+#612 = DIRECTION('',(0.,0.,1.));+#613 = ORIENTED_EDGE('',*,*,#614,.F.);+#614 = EDGE_CURVE('',#615,#606,#617,.T.);+#615 = VERTEX_POINT('',#616);+#616 = CARTESIAN_POINT('',(0.8,0.4,4.5E-02));+#617 = LINE('',#618,#619);+#618 = CARTESIAN_POINT('',(0.8,0.4,0.));+#619 = VECTOR('',#620,1.);+#620 = DIRECTION('',(0.,0.,1.));+#621 = ORIENTED_EDGE('',*,*,#622,.T.);+#622 = EDGE_CURVE('',#615,#571,#623,.T.);+#623 = CIRCLE('',#624,4.5E-02);+#624 = AXIS2_PLACEMENT_3D('',#625,#626,#627);+#625 = CARTESIAN_POINT('',(0.755,0.4,4.5E-02));+#626 = DIRECTION('',(0.,1.,0.));+#627 = DIRECTION('',(0.,0.,1.));+#628 = PLANE('',#629);+#629 = AXIS2_PLACEMENT_3D('',#630,#631,#632);+#630 = CARTESIAN_POINT('',(0.5,0.4,0.));+#631 = DIRECTION('',(0.,1.,0.));+#632 = DIRECTION('',(0.,0.,1.));+#633 = ADVANCED_FACE('',(#634),#652,.T.);+#634 = FACE_BOUND('',#635,.T.);+#635 = EDGE_LOOP('',(#636,#637,#638,#646));+#636 = ORIENTED_EDGE('',*,*,#381,.F.);+#637 = ORIENTED_EDGE('',*,*,#546,.T.);+#638 = ORIENTED_EDGE('',*,*,#639,.T.);+#639 = EDGE_CURVE('',#547,#640,#642,.T.);+#640 = VERTEX_POINT('',#641);+#641 = CARTESIAN_POINT('',(0.5,0.4,0.45));+#642 = LINE('',#643,#644);+#643 = CARTESIAN_POINT('',(-0.5,0.4,0.45));+#644 = VECTOR('',#645,1.);+#645 = DIRECTION('',(1.,0.,0.));+#646 = ORIENTED_EDGE('',*,*,#647,.F.);+#647 = EDGE_CURVE('',#382,#640,#648,.T.);+#648 = LINE('',#649,#650);+#649 = CARTESIAN_POINT('',(0.5,0.4,0.405));+#650 = VECTOR('',#651,1.);+#651 = DIRECTION('',(0.,0.,1.));+#652 = PLANE('',#653);+#653 = AXIS2_PLACEMENT_3D('',#654,#655,#656);+#654 = CARTESIAN_POINT('',(-0.5,0.4,0.405));+#655 = DIRECTION('',(0.,1.,0.));+#656 = DIRECTION('',(0.,0.,1.));+#657 = ADVANCED_FACE('',(#658),#669,.T.);+#658 = FACE_BOUND('',#659,.F.);+#659 = EDGE_LOOP('',(#660,#661,#667,#668));+#660 = ORIENTED_EDGE('',*,*,#454,.T.);+#661 = ORIENTED_EDGE('',*,*,#662,.T.);+#662 = EDGE_CURVE('',#445,#569,#663,.T.);+#663 = LINE('',#664,#665);+#664 = CARTESIAN_POINT('',(0.545,-0.4,-2.775557561563E-17));+#665 = VECTOR('',#666,1.);+#666 = DIRECTION('',(0.,1.,0.));+#667 = ORIENTED_EDGE('',*,*,#578,.F.);+#668 = ORIENTED_EDGE('',*,*,#429,.F.);+#669 = CYLINDRICAL_SURFACE('',#670,4.5E-02);+#670 = AXIS2_PLACEMENT_3D('',#671,#672,#673);+#671 = CARTESIAN_POINT('',(0.545,-0.4,4.5E-02));+#672 = DIRECTION('',(0.,1.,0.));+#673 = DIRECTION('',(-1.,0.,0.));+#674 = ADVANCED_FACE('',(#675),#686,.F.);+#675 = FACE_BOUND('',#676,.F.);+#676 = EDGE_LOOP('',(#677,#678,#679,#680));+#677 = ORIENTED_EDGE('',*,*,#568,.F.);+#678 = ORIENTED_EDGE('',*,*,#662,.F.);+#679 = ORIENTED_EDGE('',*,*,#444,.T.);+#680 = ORIENTED_EDGE('',*,*,#681,.T.);+#681 = EDGE_CURVE('',#447,#571,#682,.T.);+#682 = LINE('',#683,#684);+#683 = CARTESIAN_POINT('',(0.755,-0.4,-2.775557561563E-17));+#684 = VECTOR('',#685,1.);+#685 = DIRECTION('',(0.,1.,0.));+#686 = PLANE('',#687);+#687 = AXIS2_PLACEMENT_3D('',#688,#689,#690);+#688 = CARTESIAN_POINT('',(0.5,-0.4,0.));+#689 = DIRECTION('',(0.,0.,1.));+#690 = DIRECTION('',(1.,0.,0.));+#691 = ADVANCED_FACE('',(#692),#703,.T.);+#692 = FACE_BOUND('',#693,.T.);+#693 = EDGE_LOOP('',(#694,#695,#696,#697));+#694 = ORIENTED_EDGE('',*,*,#498,.T.);+#695 = ORIENTED_EDGE('',*,*,#681,.T.);+#696 = ORIENTED_EDGE('',*,*,#622,.F.);+#697 = ORIENTED_EDGE('',*,*,#698,.F.);+#698 = EDGE_CURVE('',#491,#615,#699,.T.);+#699 = LINE('',#700,#701);+#700 = CARTESIAN_POINT('',(0.8,-0.4,4.5E-02));+#701 = VECTOR('',#702,1.);+#702 = DIRECTION('',(0.,1.,0.));+#703 = CYLINDRICAL_SURFACE('',#704,4.5E-02);+#704 = AXIS2_PLACEMENT_3D('',#705,#706,#707);+#705 = CARTESIAN_POINT('',(0.755,-0.4,4.5E-02));+#706 = DIRECTION('',(0.,1.,0.));+#707 = DIRECTION('',(1.,0.,0.));+#708 = ADVANCED_FACE('',(#709),#720,.T.);+#709 = FACE_BOUND('',#710,.T.);+#710 = EDGE_LOOP('',(#711,#712,#713,#714));+#711 = ORIENTED_EDGE('',*,*,#490,.F.);+#712 = ORIENTED_EDGE('',*,*,#698,.T.);+#713 = ORIENTED_EDGE('',*,*,#614,.T.);+#714 = ORIENTED_EDGE('',*,*,#715,.F.);+#715 = EDGE_CURVE('',#482,#606,#716,.T.);+#716 = LINE('',#717,#718);+#717 = CARTESIAN_POINT('',(0.8,-0.4,0.405));+#718 = VECTOR('',#719,1.);+#719 = DIRECTION('',(0.,1.,0.));+#720 = PLANE('',#721);+#721 = AXIS2_PLACEMENT_3D('',#722,#723,#724);+#722 = CARTESIAN_POINT('',(0.8,-0.4,0.));+#723 = DIRECTION('',(1.,0.,0.));+#724 = DIRECTION('',(0.,0.,1.));+#725 = ADVANCED_FACE('',(#726),#737,.T.);+#726 = FACE_BOUND('',#727,.F.);+#727 = EDGE_LOOP('',(#728,#729,#735,#736));+#728 = ORIENTED_EDGE('',*,*,#481,.T.);+#729 = ORIENTED_EDGE('',*,*,#730,.T.);+#730 = EDGE_CURVE('',#474,#598,#731,.T.);+#731 = LINE('',#732,#733);+#732 = CARTESIAN_POINT('',(0.755,-0.4,0.45));+#733 = VECTOR('',#734,1.);+#734 = DIRECTION('',(0.,1.,0.));+#735 = ORIENTED_EDGE('',*,*,#605,.F.);+#736 = ORIENTED_EDGE('',*,*,#715,.F.);+#737 = CYLINDRICAL_SURFACE('',#738,4.5E-02);+#738 = AXIS2_PLACEMENT_3D('',#739,#740,#741);+#739 = CARTESIAN_POINT('',(0.755,-0.4,0.405));+#740 = DIRECTION('',(0.,1.,0.));+#741 = DIRECTION('',(1.,0.,0.));+#742 = ADVANCED_FACE('',(#743),#754,.T.);+#743 = FACE_BOUND('',#744,.T.);+#744 = EDGE_LOOP('',(#745,#746,#752,#753));+#745 = ORIENTED_EDGE('',*,*,#597,.F.);+#746 = ORIENTED_EDGE('',*,*,#747,.F.);+#747 = EDGE_CURVE('',#465,#589,#748,.T.);+#748 = LINE('',#749,#750);+#749 = CARTESIAN_POINT('',(0.545,-0.4,0.45));+#750 = VECTOR('',#751,1.);+#751 = DIRECTION('',(0.,1.,0.));+#752 = ORIENTED_EDGE('',*,*,#473,.T.);+#753 = ORIENTED_EDGE('',*,*,#730,.T.);+#754 = PLANE('',#755);+#755 = AXIS2_PLACEMENT_3D('',#756,#757,#758);+#756 = CARTESIAN_POINT('',(0.5,-0.4,0.45));+#757 = DIRECTION('',(0.,0.,1.));+#758 = DIRECTION('',(1.,0.,0.));+#759 = ADVANCED_FACE('',(#760),#771,.T.);+#760 = FACE_BOUND('',#761,.T.);+#761 = EDGE_LOOP('',(#762,#763,#764,#765));+#762 = ORIENTED_EDGE('',*,*,#464,.T.);+#763 = ORIENTED_EDGE('',*,*,#747,.T.);+#764 = ORIENTED_EDGE('',*,*,#588,.F.);+#765 = ORIENTED_EDGE('',*,*,#766,.F.);+#766 = EDGE_CURVE('',#299,#382,#767,.T.);+#767 = LINE('',#768,#769);+#768 = CARTESIAN_POINT('',(0.5,-0.4,0.405));+#769 = VECTOR('',#770,1.);+#770 = DIRECTION('',(0.,1.,0.));+#771 = CYLINDRICAL_SURFACE('',#772,4.5E-02);+#772 = AXIS2_PLACEMENT_3D('',#773,#774,#775);+#773 = CARTESIAN_POINT('',(0.545,-0.4,0.405));+#774 = DIRECTION('',(0.,1.,0.));+#775 = DIRECTION('',(-1.,0.,0.));+#776 = ADVANCED_FACE('',(#777),#788,.T.);+#777 = FACE_BOUND('',#778,.T.);+#778 = EDGE_LOOP('',(#779,#780,#781,#782));+#779 = ORIENTED_EDGE('',*,*,#530,.F.);+#780 = ORIENTED_EDGE('',*,*,#766,.T.);+#781 = ORIENTED_EDGE('',*,*,#647,.T.);+#782 = ORIENTED_EDGE('',*,*,#783,.F.);+#783 = EDGE_CURVE('',#523,#640,#784,.T.);+#784 = LINE('',#785,#786);+#785 = CARTESIAN_POINT('',(0.5,-0.4,0.45));+#786 = VECTOR('',#787,1.);+#787 = DIRECTION('',(0.,1.,0.));+#788 = PLANE('',#789);+#789 = AXIS2_PLACEMENT_3D('',#790,#791,#792);+#790 = CARTESIAN_POINT('',(0.5,-0.4,0.405));+#791 = DIRECTION('',(1.,0.,0.));+#792 = DIRECTION('',(0.,0.,1.));+#793 = ADVANCED_FACE('',(#794),#800,.T.);+#794 = FACE_BOUND('',#795,.T.);+#795 = EDGE_LOOP('',(#796,#797,#798,#799));+#796 = ORIENTED_EDGE('',*,*,#554,.F.);+#797 = ORIENTED_EDGE('',*,*,#522,.T.);+#798 = ORIENTED_EDGE('',*,*,#783,.T.);+#799 = ORIENTED_EDGE('',*,*,#639,.F.);+#800 = PLANE('',#801);+#801 = AXIS2_PLACEMENT_3D('',#802,#803,#804);+#802 = CARTESIAN_POINT('',(-0.5,-0.4,0.45));+#803 = DIRECTION('',(0.,0.,1.));+#804 = DIRECTION('',(1.,0.,0.));+#805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3)+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#809)) GLOBAL_UNIT_ASSIGNED_CONTEXT+((#806,#807,#808)) REPRESENTATION_CONTEXT('Context #1',+'3D Context with UNIT and UNCERTAINTY') );+#806 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#807 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#808 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#809 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#806,+'distance_accuracy_value','confusion accuracy');+#810 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#811 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#812,+#820,#827,#834,#841,#848,#855,#862,#870,#877,#884,#891,#898,#905,+#913,#920,#927,#934,#941,#948,#955,#962,#969,#976,#983,#990),#805);+#812 = STYLED_ITEM('color',(#813),#17);+#813 = PRESENTATION_STYLE_ASSIGNMENT((#814));+#814 = SURFACE_STYLE_USAGE(.BOTH.,#815);+#815 = SURFACE_SIDE_STYLE('',(#816));+#816 = SURFACE_STYLE_FILL_AREA(#817);+#817 = FILL_AREA_STYLE('',(#818));+#818 = FILL_AREA_STYLE_COLOUR('',#819);+#819 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812);+#820 = STYLED_ITEM('color',(#821),#57);+#821 = PRESENTATION_STYLE_ASSIGNMENT((#822));+#822 = SURFACE_STYLE_USAGE(.BOTH.,#823);+#823 = SURFACE_SIDE_STYLE('',(#824));+#824 = SURFACE_STYLE_FILL_AREA(#825);+#825 = FILL_AREA_STYLE('',(#826));+#826 = FILL_AREA_STYLE_COLOUR('',#819);+#827 = STYLED_ITEM('color',(#828),#140);+#828 = PRESENTATION_STYLE_ASSIGNMENT((#829));+#829 = SURFACE_STYLE_USAGE(.BOTH.,#830);+#830 = SURFACE_SIDE_STYLE('',(#831));+#831 = SURFACE_STYLE_FILL_AREA(#832);+#832 = FILL_AREA_STYLE('',(#833));+#833 = FILL_AREA_STYLE_COLOUR('',#819);+#834 = STYLED_ITEM('color',(#835),#165);+#835 = PRESENTATION_STYLE_ASSIGNMENT((#836));+#836 = SURFACE_STYLE_USAGE(.BOTH.,#837);+#837 = SURFACE_SIDE_STYLE('',(#838));+#838 = SURFACE_STYLE_FILL_AREA(#839);+#839 = FILL_AREA_STYLE('',(#840));+#840 = FILL_AREA_STYLE_COLOUR('',#819);+#841 = STYLED_ITEM('color',(#842),#190);+#842 = PRESENTATION_STYLE_ASSIGNMENT((#843));+#843 = SURFACE_STYLE_USAGE(.BOTH.,#844);+#844 = SURFACE_SIDE_STYLE('',(#845));+#845 = SURFACE_STYLE_FILL_AREA(#846);+#846 = FILL_AREA_STYLE('',(#847));+#847 = FILL_AREA_STYLE_COLOUR('',#819);+#848 = STYLED_ITEM('color',(#849),#257);+#849 = PRESENTATION_STYLE_ASSIGNMENT((#850));+#850 = SURFACE_STYLE_USAGE(.BOTH.,#851);+#851 = SURFACE_SIDE_STYLE('',(#852));+#852 = SURFACE_STYLE_FILL_AREA(#853);+#853 = FILL_AREA_STYLE('',(#854));+#854 = FILL_AREA_STYLE_COLOUR('',#819);+#855 = STYLED_ITEM('color',(#856),#274);+#856 = PRESENTATION_STYLE_ASSIGNMENT((#857));+#857 = SURFACE_STYLE_USAGE(.BOTH.,#858);+#858 = SURFACE_SIDE_STYLE('',(#859));+#859 = SURFACE_STYLE_FILL_AREA(#860);+#860 = FILL_AREA_STYLE('',(#861));+#861 = FILL_AREA_STYLE_COLOUR('',#819);+#862 = STYLED_ITEM('color',(#863),#291);+#863 = PRESENTATION_STYLE_ASSIGNMENT((#864));+#864 = SURFACE_STYLE_USAGE(.BOTH.,#865);+#865 = SURFACE_SIDE_STYLE('',(#866));+#866 = SURFACE_STYLE_FILL_AREA(#867);+#867 = FILL_AREA_STYLE('',(#868));+#868 = FILL_AREA_STYLE_COLOUR('',#869);+#869 = COLOUR_RGB('',0.894999980927,0.89099997282,0.813000023365);+#870 = STYLED_ITEM('color',(#871),#340);+#871 = PRESENTATION_STYLE_ASSIGNMENT((#872));+#872 = SURFACE_STYLE_USAGE(.BOTH.,#873);+#873 = SURFACE_SIDE_STYLE('',(#874));+#874 = SURFACE_STYLE_FILL_AREA(#875);+#875 = FILL_AREA_STYLE('',(#876));+#876 = FILL_AREA_STYLE_COLOUR('',#819);+#877 = STYLED_ITEM('color',(#878),#357);+#878 = PRESENTATION_STYLE_ASSIGNMENT((#879));+#879 = SURFACE_STYLE_USAGE(.BOTH.,#880);+#880 = SURFACE_SIDE_STYLE('',(#881));+#881 = SURFACE_STYLE_FILL_AREA(#882);+#882 = FILL_AREA_STYLE('',(#883));+#883 = FILL_AREA_STYLE_COLOUR('',#819);+#884 = STYLED_ITEM('color',(#885),#374);+#885 = PRESENTATION_STYLE_ASSIGNMENT((#886));+#886 = SURFACE_STYLE_USAGE(.BOTH.,#887);+#887 = SURFACE_SIDE_STYLE('',(#888));+#888 = SURFACE_STYLE_FILL_AREA(#889);+#889 = FILL_AREA_STYLE('',(#890));+#890 = FILL_AREA_STYLE_COLOUR('',#869);+#891 = STYLED_ITEM('color',(#892),#423);+#892 = PRESENTATION_STYLE_ASSIGNMENT((#893));+#893 = SURFACE_STYLE_USAGE(.BOTH.,#894);+#894 = SURFACE_SIDE_STYLE('',(#895));+#895 = SURFACE_STYLE_FILL_AREA(#896);+#896 = FILL_AREA_STYLE('',(#897));+#897 = FILL_AREA_STYLE_COLOUR('',#869);+#898 = STYLED_ITEM('color',(#899),#440);+#899 = PRESENTATION_STYLE_ASSIGNMENT((#900));+#900 = SURFACE_STYLE_USAGE(.BOTH.,#901);+#901 = SURFACE_SIDE_STYLE('',(#902));+#902 = SURFACE_STYLE_FILL_AREA(#903);+#903 = FILL_AREA_STYLE('',(#904));+#904 = FILL_AREA_STYLE_COLOUR('',#819);+#905 = STYLED_ITEM('color',(#906),#509);+#906 = PRESENTATION_STYLE_ASSIGNMENT((#907));+#907 = SURFACE_STYLE_USAGE(.BOTH.,#908);+#908 = SURFACE_SIDE_STYLE('',(#909));+#909 = SURFACE_STYLE_FILL_AREA(#910);+#910 = FILL_AREA_STYLE('',(#911));+#911 = FILL_AREA_STYLE_COLOUR('',#912);+#912 = COLOUR_RGB('',8.200000226498E-02,8.600000292063E-02,+9.399999678135E-02);+#913 = STYLED_ITEM('color',(#914),#540);+#914 = PRESENTATION_STYLE_ASSIGNMENT((#915));+#915 = SURFACE_STYLE_USAGE(.BOTH.,#916);+#916 = SURFACE_SIDE_STYLE('',(#917));+#917 = SURFACE_STYLE_FILL_AREA(#918);+#918 = FILL_AREA_STYLE('',(#919));+#919 = FILL_AREA_STYLE_COLOUR('',#912);+#920 = STYLED_ITEM('color',(#921),#564);+#921 = PRESENTATION_STYLE_ASSIGNMENT((#922));+#922 = SURFACE_STYLE_USAGE(.BOTH.,#923);+#923 = SURFACE_SIDE_STYLE('',(#924));+#924 = SURFACE_STYLE_FILL_AREA(#925);+#925 = FILL_AREA_STYLE('',(#926));+#926 = FILL_AREA_STYLE_COLOUR('',#819);+#927 = STYLED_ITEM('color',(#928),#633);+#928 = PRESENTATION_STYLE_ASSIGNMENT((#929));+#929 = SURFACE_STYLE_USAGE(.BOTH.,#930);+#930 = SURFACE_SIDE_STYLE('',(#931));+#931 = SURFACE_STYLE_FILL_AREA(#932);+#932 = FILL_AREA_STYLE('',(#933));+#933 = FILL_AREA_STYLE_COLOUR('',#912);+#934 = STYLED_ITEM('color',(#935),#657);+#935 = PRESENTATION_STYLE_ASSIGNMENT((#936));+#936 = SURFACE_STYLE_USAGE(.BOTH.,#937);+#937 = SURFACE_SIDE_STYLE('',(#938));+#938 = SURFACE_STYLE_FILL_AREA(#939);+#939 = FILL_AREA_STYLE('',(#940));+#940 = FILL_AREA_STYLE_COLOUR('',#819);+#941 = STYLED_ITEM('color',(#942),#674);+#942 = PRESENTATION_STYLE_ASSIGNMENT((#943));+#943 = SURFACE_STYLE_USAGE(.BOTH.,#944);+#944 = SURFACE_SIDE_STYLE('',(#945));+#945 = SURFACE_STYLE_FILL_AREA(#946);+#946 = FILL_AREA_STYLE('',(#947));+#947 = FILL_AREA_STYLE_COLOUR('',#819);+#948 = STYLED_ITEM('color',(#949),#691);+#949 = PRESENTATION_STYLE_ASSIGNMENT((#950));+#950 = SURFACE_STYLE_USAGE(.BOTH.,#951);+#951 = SURFACE_SIDE_STYLE('',(#952));+#952 = SURFACE_STYLE_FILL_AREA(#953);+#953 = FILL_AREA_STYLE('',(#954));+#954 = FILL_AREA_STYLE_COLOUR('',#819);+#955 = STYLED_ITEM('color',(#956),#708);+#956 = PRESENTATION_STYLE_ASSIGNMENT((#957));+#957 = SURFACE_STYLE_USAGE(.BOTH.,#958);+#958 = SURFACE_SIDE_STYLE('',(#959));+#959 = SURFACE_STYLE_FILL_AREA(#960);+#960 = FILL_AREA_STYLE('',(#961));+#961 = FILL_AREA_STYLE_COLOUR('',#819);+#962 = STYLED_ITEM('color',(#963),#725);+#963 = PRESENTATION_STYLE_ASSIGNMENT((#964));+#964 = SURFACE_STYLE_USAGE(.BOTH.,#965);+#965 = SURFACE_SIDE_STYLE('',(#966));+#966 = SURFACE_STYLE_FILL_AREA(#967);+#967 = FILL_AREA_STYLE('',(#968));+#968 = FILL_AREA_STYLE_COLOUR('',#819);+#969 = STYLED_ITEM('color',(#970),#742);+#970 = PRESENTATION_STYLE_ASSIGNMENT((#971));+#971 = SURFACE_STYLE_USAGE(.BOTH.,#972);+#972 = SURFACE_SIDE_STYLE('',(#973));+#973 = SURFACE_STYLE_FILL_AREA(#974);+#974 = FILL_AREA_STYLE('',(#975));+#975 = FILL_AREA_STYLE_COLOUR('',#819);+#976 = STYLED_ITEM('color',(#977),#759);+#977 = PRESENTATION_STYLE_ASSIGNMENT((#978));+#978 = SURFACE_STYLE_USAGE(.BOTH.,#979);+#979 = SURFACE_SIDE_STYLE('',(#980));+#980 = SURFACE_STYLE_FILL_AREA(#981);+#981 = FILL_AREA_STYLE('',(#982));+#982 = FILL_AREA_STYLE_COLOUR('',#819);+#983 = STYLED_ITEM('color',(#984),#776);+#984 = PRESENTATION_STYLE_ASSIGNMENT((#985));+#985 = SURFACE_STYLE_USAGE(.BOTH.,#986);+#986 = SURFACE_SIDE_STYLE('',(#987));+#987 = SURFACE_STYLE_FILL_AREA(#988);+#988 = FILL_AREA_STYLE('',(#989));+#989 = FILL_AREA_STYLE_COLOUR('',#912);+#990 = STYLED_ITEM('color',(#991),#793);+#991 = PRESENTATION_STYLE_ASSIGNMENT((#992));+#992 = SURFACE_STYLE_USAGE(.BOTH.,#993);+#993 = SURFACE_SIDE_STYLE('',(#994));+#994 = SURFACE_STYLE_FILL_AREA(#995);+#995 = FILL_AREA_STYLE('',(#996));+#996 = FILL_AREA_STYLE_COLOUR('',#912);+ENDSEC;+END-ISO-10303-21;