component
TNPW060317K8BEEA
Public Made by Adomby adom
Vishay Intertech Chip Resistor - Surface Mount, 0603. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Add precision resistor source libraries with original Vishay model and datasheets
14 files changed
+1829−25
README.md+23−1TNPW060317K8BEEA.adom-lbr.json+298TNPW060317K8BEEA.lbr+112TNPW_e3_0603.glbTNPW_e3_0603.stp+553canonical-export/TNPW060317K8BEEA.kicad_mod+30canonical-export/TNPW060317K8BEEA.kicad_sym+117canonical-export/TNPW_e3_0603.stp+553exports/altium/TNPW060317K8BEEA.PcbLibexports/altium/TNPW060317K8BEEA.SchLibpage.json+31−24provenance.json+112recommended-lands.pdftnpw-e3-datasheet.pdfREADME.md+23−1@@ -1,3 +1,25 @@ # TNPW060317K8BEEA -Vishay 17.8k ohm 0.1% 25 ppm/K 0603 resistor; manufacturer STEP and design libraries, validation in progress.+Vishay TNPW e3 **17.8k ohm, ±0.1%, ±25 ppm/K**, nonpolar 0603 thin-film resistor. Candidate feedback component for [TMF8829 Depth Lab](https://wiki.adom.inc/adom/tmf8829-depth-lab). This is a component library in validation, not a qualified board or fabrication release.++## Manufacturer originals++- [TNPW e3 datasheet](https://www.vishay.com/docs/28758/tnpw_e3.pdf), revision 10-Apr-2026: ordering codes on page 4, dimensions on page 15. B means ±0.1%, E means ±25 ppm/K, EA means lead-free 5000-piece reel packaging. Distributor cut-tape terms need confirmation before procurement.+- [Original STEP archive](https://www.vishay.com/docs/28967/tnpw_e3_3dmodels.zip), linked directly by that datasheet: member `TNPW_V_e3/TNPW_e3_0603.stp`. Unchanged manufacturer bytes are preserved. The shared family geometry applies to this 0603 variant.+- [Recommended lands](https://www.vishay.com/docs/28950/recsoldpaddims-drabeyresfus.pdf), revision 12-Jul-2022. Selected IPC reflow recommendation: pads 0.90 × 1.00 mm, centers X ±0.80 mm, inner gap 0.70 mm, outer span 2.50 mm. Factory profile validation remains open.++## Library construction and pose++The symbol derives from KiCad Device:R_US, obtained through service-kicad (KiCad libraries CC-BY-SA 4.0 with the library exception). Exact MPN/value, footprint and manufacturer datasheet fields are added. Both pins are passive: 1→pad 1, 2→pad 2. The part is nonpolar; the silk dot is an assembly pad-1 cue.++The footprint was authored with adom-footprint from the manufacturer's land dimensions. Its generated full silk rectangle crossed the pads, so the project derivative replaces it with top/bottom lines clear of copper. Original generator output is retained locally. The fab outline is 1.55 × 0.85 mm; the courtyard encloses the pads with 0.25 mm clearance.++OCCT read-back of the manufacturer STEP is X 0..0.85, Y 0..1.55, Z 0..0.45 mm. The canonical candidate pose rotates Z −90° then translates (−0.775,+0.425,0) mm to center the body along the footprint X axis with floor Z=0. Actual contact seating in native KiCad/Fusion/Altium is still pending. The GLB is an OCCT visualization derivative; it does not replace the original STEP. Virtual MPN marking remains to be added as a separate annotation derivative.++The adom-lbr JSON is canonical. KiCad exports are in `canonical-export/`, Fusion's complete deviceset is `TNPW060317K8BEEA.lbr`, and Altium libraries are in `exports/altium/`. Export success is not native application parity.++## Sourcing snapshot++Parts Search snapshot on 9 September 2026: exact Mouser `71-TNPW060317K8BEEA` reports 5,851 stock at $0.26. Preferred available source is Mouser. Lead time field: 154 Days. No reservation or order; cut-tape availability and fulfillment remain unconfirmed.++These precision parts are a documented exception to the Basic Parts preference: the current regulator/supervisor allocation is tighter than generic 1% parts after temperature and drift. This does not claim every possible stock-resistor network is unsuitable.
TNPW060317K8BEEA.adom-lbr.jsonadded+298@@ -0,0 +1,298 @@+{+ "schema_version": 2,+ "mpn": "TNPW060317K8BEEA",+ "manufacturer": "Vishay",+ "package": "0603",+ "value": "17.8k",+ "category": "resistor",+ "symbol": {+ "name": "TNPW060317K8BEEA",+ "pins": [+ {+ "number": "1",+ "name": "",+ "electrical_type": "passive",+ "x": 0,+ "y": 150,+ "length": 50,+ "rotation": 270+ },+ {+ "number": "2",+ "name": "",+ "electrical_type": "passive",+ "x": 0,+ "y": -150,+ "length": 50,+ "rotation": 90+ }+ ],+ "body": null,+ "graphics": [+ {+ "kind": "polyline",+ "points": [+ [+ 0.0,+ 90.0+ ],+ [+ 0.0,+ 100.0+ ]+ ],+ "width": 0.0+ },+ {+ "kind": "polyline",+ "points": [+ [+ 0.0,+ 90.0+ ],+ [+ 40.0,+ 75.0+ ],+ [+ 0.0,+ 60.0+ ],+ [+ -40.0,+ 45.0+ ],+ [+ 0.0,+ 30.0+ ]+ ],+ "width": 0.0+ },+ {+ "kind": "polyline",+ "points": [+ [+ 0.0,+ 30.0+ ],+ [+ 40.0,+ 15.0+ ],+ [+ 0.0,+ 0.0+ ],+ [+ -40.0,+ -15.0+ ],+ [+ 0.0,+ -30.0+ ]+ ],+ "width": 0.0+ },+ {+ "kind": "polyline",+ "points": [+ [+ 0.0,+ -30.0+ ],+ [+ 40.0,+ -45.0+ ],+ [+ 0.0,+ -60.0+ ],+ [+ -40.0,+ -75.0+ ],+ [+ 0.0,+ -90.0+ ]+ ],+ "width": 0.0+ },+ {+ "kind": "polyline",+ "points": [+ [+ 0.0,+ -90.0+ ],+ [+ 0.0,+ -100.0+ ]+ ],+ "width": 0.0+ }+ ],+ "designator_prefix": "R",+ "footprint": "TNPW060317K8BEEA",+ "parameters": [+ {+ "name": "Value",+ "value": "17.8k",+ "visible": true+ },+ {+ "name": "Datasheet",+ "value": "https://www.vishay.com/docs/28758/tnpw_e3.pdf",+ "visible": true+ },+ {+ "name": "Description",+ "value": "Vishay TNPW e3 17.8k ohm 0.1% 25 ppm/K, 0603; nonpolar",+ "visible": true+ },+ {+ "name": "ki_keywords",+ "value": "R res resistor",+ "visible": true+ },+ {+ "name": "ki_fp_filters",+ "value": "R_*",+ "visible": true+ }+ ],+ "pin_numbers_hidden": true,+ "pin_names_hidden": false+ },+ "footprint": {+ "aperture_defaults": {},+ "name": "TNPW060317K8BEEA",+ "pads": [+ {+ "apertures": {},+ "layers": [+ "F.Cu",+ "F.Paste",+ "F.Mask"+ ],+ "number": "1",+ "x_mm": -0.8,+ "y_mm": 0.0,+ "w_mm": 0.9,+ "h_mm": 1.0,+ "drill_mm": 0.0,+ "rotation": 0.0,+ "shape": "rect"+ },+ {+ "apertures": {},+ "layers": [+ "F.Cu",+ "F.Paste",+ "F.Mask"+ ],+ "number": "2",+ "x_mm": 0.8,+ "y_mm": 0.0,+ "w_mm": 0.9,+ "h_mm": 1.0,+ "drill_mm": 0.0,+ "rotation": 0.0,+ "shape": "rect"+ }+ ],+ "graphics": [+ {+ "kind": "line",+ "layer": {+ "role": "silk"+ },+ "x1": -1.25,+ "y1": -0.75,+ "x2": 1.25,+ "y2": -0.75,+ "width": 0.12+ },+ {+ "kind": "line",+ "layer": {+ "role": "silk"+ },+ "x1": -1.25,+ "y1": 0.75,+ "x2": 1.25,+ "y2": 0.75,+ "width": 0.12+ },+ {+ "kind": "rect",+ "layer": {+ "role": "courtyard"+ },+ "x1": -1.5,+ "y1": -0.75,+ "x2": 1.5,+ "y2": 0.75,+ "width": 0.05+ },+ {+ "kind": "rect",+ "layer": {+ "role": "fab"+ },+ "x1": -0.775,+ "y1": -0.425,+ "x2": 0.775,+ "y2": 0.425,+ "width": 0.1+ },+ {+ "kind": "circle",+ "layer": {+ "role": "silk"+ },+ "cx": -1.05,+ "cy": -1.05,+ "r": 0.06000000000000005,+ "width": 0.1+ }+ ],+ "models": [+ {+ "path": "TNPW_e3_0603.stp",+ "translation_mm": [+ -0.775,+ 0.425,+ 0.0+ ],+ "rotation_deg": [+ 0.0,+ 0.0,+ -90.0+ ],+ "scale": [+ 1.0,+ 1.0,+ 1.0+ ]+ }+ ]+ },+ "connect": [+ {+ "pin": "1",+ "pad": "1"+ },+ {+ "pin": "2",+ "pad": "2"+ }+ ],+ "provenance": {+ "source": "kicad_import"+ }+}
TNPW060317K8BEEA.lbradded+112@@ -0,0 +1,112 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>Vishay TNPW e3 17.8k ohm 0.1% 25 ppm/K, 0603; nonpolar</description>+<packages>+<package name="TNPW060317K8BEEA">+ <description>2 pads, 2.5 x 1.0 mm</description>+ <smd name="1" x="-0.8000" y="-0.0000" dx="0.9000" dy="1.0000" layer="1"/>+ <smd name="2" x="0.8000" y="-0.0000" dx="0.9000" dy="1.0000" layer="1"/>+ <circle x="-1.0500" y="1.0500" radius="0.0600" width="0.1000" layer="21"/>+ <wire x1="-0.7750" y1="0.4250" x2="0.7750" y2="0.4250" width="0.1000" layer="51"/>+ <wire x1="0.7750" y1="0.4250" x2="0.7750" y2="-0.4250" width="0.1000" layer="51"/>+ <wire x1="0.7750" y1="-0.4250" x2="-0.7750" y2="-0.4250" width="0.1000" layer="51"/>+ <wire x1="-0.7750" y1="-0.4250" x2="-0.7750" y2="0.4250" width="0.1000" layer="51"/>+ <wire x1="-1.2500" y1="0.7500" x2="1.2500" y2="0.7500" width="0.1200" layer="21"/>+ <wire x1="-1.2500" y1="-0.7500" x2="1.2500" y2="-0.7500" width="0.1200" layer="21"/>+ <text x="0" y="1.350" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-1.350" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="TNPW060317K8BEEA">+ <description>Vishay TNPW e3 17.8k ohm 0.1% 25 ppm/K, 0603; nonpolar</description>+ <wire x1="0.0000" y1="2.2860" x2="0.0000" y2="2.5400" width="0.1524" layer="94"/>+ <wire x1="0.0000" y1="2.2860" x2="1.0160" y2="1.9050" width="0.1524" layer="94"/>+ <wire x1="1.0160" y1="1.9050" x2="0.0000" y2="1.5240" width="0.1524" layer="94"/>+ <wire x1="0.0000" y1="1.5240" x2="-1.0160" y2="1.1430" width="0.1524" layer="94"/>+ <wire x1="-1.0160" y1="1.1430" x2="0.0000" y2="0.7620" width="0.1524" layer="94"/>+ <wire x1="0.0000" y1="0.7620" x2="1.0160" y2="0.3810" width="0.1524" layer="94"/>+ <wire x1="1.0160" y1="0.3810" x2="0.0000" y2="0.0000" width="0.1524" layer="94"/>+ <wire x1="0.0000" y1="0.0000" x2="-1.0160" y2="-0.3810" width="0.1524" layer="94"/>+ <wire x1="-1.0160" y1="-0.3810" x2="0.0000" y2="-0.7620" width="0.1524" layer="94"/>+ <wire x1="0.0000" y1="-0.7620" x2="1.0160" y2="-1.1430" width="0.1524" layer="94"/>+ <wire x1="1.0160" y1="-1.1430" x2="0.0000" y2="-1.5240" width="0.1524" layer="94"/>+ <wire x1="0.0000" y1="-1.5240" x2="-1.0160" y2="-1.9050" width="0.1524" layer="94"/>+ <wire x1="-1.0160" y1="-1.9050" x2="0.0000" y2="-2.2860" width="0.1524" layer="94"/>+ <wire x1="0.0000" y1="-2.2860" x2="0.0000" y2="-2.5400" width="0.1524" layer="94"/>+ <text x="0" y="10" size="1.27" layer="95" align="bottom-center">>NAME</text>+ <text x="0" y="-10" size="1.27" layer="96" align="top-center">>VALUE</text>+ <pin name="1" x="0" y="3.81" length="short" direction="pas" rot="R270" visible="pad"/>+ <pin name="2" x="0" y="-3.81" length="short" direction="pas" rot="R90" visible="pad"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="TNPW060317K8BEEA" prefix="R">+ <description>Vishay TNPW e3 17.8k ohm 0.1% 25 ppm/K, 0603; nonpolar</description>+ <gates>+ <gate name="G$1" symbol="TNPW060317K8BEEA" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="TNPW060317K8BEEA">+ <connects>+ <connect gate="G$1" pin="1" pad="1"/>+ <connect gate="G$1" pin="2" pad="2"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
TNPW_e3_0603.glbadded⋯ 1 unchanged line ⋯
TNPW_e3_0603.stpadded+553@@ -0,0 +1,553 @@+ISO-10303-21; +HEADER; +/* Generated by software containing ST-Developer + * from STEP Tools, Inc. (www.steptools.com) + */ + +FILE_DESCRIPTION( +/* description */ (''), +/* implementation_level */ '2;1'); + +FILE_NAME( +/* name */ '\\\\wsse03\\home\\msaalfrank\\Konstruktion\\tknuschke\\060 +3.stp', +/* time_stamp */ '2020-11-09T12:41:58+01:00', +/* author */ ('msaalfrank'), +/* organization */ (''), +/* preprocessor_version */ 'ST-DEVELOPER v16.5', +/* originating_system */ 'Autodesk Inventor 2017', +/* authorisation */ ''); + +FILE_SCHEMA (('AUTOMOTIVE_DESIGN { 1 0 10303 214 3 1 1 }')); +ENDSEC; + +DATA; +#10=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#15,#14, +#16,#17,#18,#19,#20,#23,#21,#22,#24),#451); +#11=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#460,#12); +#12=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#13),#450); +#13=MANIFOLD_SOLID_BREP('Volumenk\X\F6rper1',#285); +#14=STYLED_ITEM('',(#470),#272); +#15=STYLED_ITEM('',(#470),#273); +#16=STYLED_ITEM('',(#471),#277); +#17=STYLED_ITEM('',(#470),#278); +#18=STYLED_ITEM('',(#472),#279); +#19=STYLED_ITEM('',(#470),#280); +#20=STYLED_ITEM('',(#470),#281); +#21=STYLED_ITEM('',(#471),#282); +#22=STYLED_ITEM('',(#471),#283); +#23=STYLED_ITEM('',(#470),#284); +#24=STYLED_ITEM('',(#469),#13); +#25=FACE_OUTER_BOUND('',#39,.T.); +#26=FACE_OUTER_BOUND('',#40,.T.); +#27=FACE_OUTER_BOUND('',#41,.T.); +#28=FACE_OUTER_BOUND('',#42,.T.); +#29=FACE_OUTER_BOUND('',#43,.T.); +#30=FACE_OUTER_BOUND('',#44,.T.); +#31=FACE_OUTER_BOUND('',#45,.T.); +#32=FACE_OUTER_BOUND('',#46,.T.); +#33=FACE_OUTER_BOUND('',#47,.T.); +#34=FACE_OUTER_BOUND('',#48,.T.); +#35=FACE_OUTER_BOUND('',#49,.T.); +#36=FACE_OUTER_BOUND('',#50,.T.); +#37=FACE_OUTER_BOUND('',#51,.T.); +#38=FACE_OUTER_BOUND('',#52,.T.); +#39=EDGE_LOOP('',(#185,#186,#187,#188)); +#40=EDGE_LOOP('',(#189,#190,#191,#192)); +#41=EDGE_LOOP('',(#193,#194,#195,#196)); +#42=EDGE_LOOP('',(#197,#198,#199,#200)); +#43=EDGE_LOOP('',(#201,#202,#203,#204)); +#44=EDGE_LOOP('',(#205,#206,#207,#208)); +#45=EDGE_LOOP('',(#209,#210,#211,#212)); +#46=EDGE_LOOP('',(#213,#214,#215,#216)); +#47=EDGE_LOOP('',(#217,#218,#219,#220)); +#48=EDGE_LOOP('',(#221,#222,#223,#224)); +#49=EDGE_LOOP('',(#225,#226,#227,#228)); +#50=EDGE_LOOP('',(#229,#230,#231,#232,#233,#234,#235,#236,#237,#238,#239, +#240)); +#51=EDGE_LOOP('',(#241,#242,#243,#244,#245,#246,#247,#248,#249,#250,#251, +#252)); +#52=EDGE_LOOP('',(#253,#254,#255,#256)); +#53=LINE('',#377,#89); +#54=LINE('',#379,#90); +#55=LINE('',#381,#91); +#56=LINE('',#382,#92); +#57=LINE('',#385,#93); +#58=LINE('',#387,#94); +#59=LINE('',#388,#95); +#60=LINE('',#392,#96); +#61=LINE('',#394,#97); +#62=LINE('',#396,#98); +#63=LINE('',#397,#99); +#64=LINE('',#400,#100); +#65=LINE('',#402,#101); +#66=LINE('',#403,#102); +#67=LINE('',#407,#103); +#68=LINE('',#409,#104); +#69=LINE('',#411,#105); +#70=LINE('',#412,#106); +#71=LINE('',#416,#107); +#72=LINE('',#418,#108); +#73=LINE('',#420,#109); +#74=LINE('',#421,#110); +#75=LINE('',#423,#111); +#76=LINE('',#424,#112); +#77=LINE('',#427,#113); +#78=LINE('',#429,#114); +#79=LINE('',#430,#115); +#80=LINE('',#432,#116); +#81=LINE('',#433,#117); +#82=LINE('',#435,#118); +#83=LINE('',#436,#119); +#84=LINE('',#439,#120); +#85=LINE('',#441,#121); +#86=LINE('',#442,#122); +#87=LINE('',#444,#123); +#88=LINE('',#446,#124); +#89=VECTOR('',#311,10.); +#90=VECTOR('',#312,10.); +#91=VECTOR('',#313,10.); +#92=VECTOR('',#314,10.); +#93=VECTOR('',#317,10.); +#94=VECTOR('',#318,10.); +#95=VECTOR('',#319,10.); +#96=VECTOR('',#322,10.); +#97=VECTOR('',#323,10.); +#98=VECTOR('',#324,10.); +#99=VECTOR('',#325,10.); +#100=VECTOR('',#328,10.); +#101=VECTOR('',#329,10.); +#102=VECTOR('',#330,10.); +#103=VECTOR('',#333,10.); +#104=VECTOR('',#334,10.); +#105=VECTOR('',#335,10.); +#106=VECTOR('',#336,10.); +#107=VECTOR('',#339,10.); +#108=VECTOR('',#340,10.); +#109=VECTOR('',#341,10.); +#110=VECTOR('',#342,10.); +#111=VECTOR('',#345,10.); +#112=VECTOR('',#346,10.); +#113=VECTOR('',#349,10.); +#114=VECTOR('',#350,10.); +#115=VECTOR('',#351,10.); +#116=VECTOR('',#354,10.); +#117=VECTOR('',#355,10.); +#118=VECTOR('',#358,10.); +#119=VECTOR('',#359,10.); +#120=VECTOR('',#362,10.); +#121=VECTOR('',#363,10.); +#122=VECTOR('',#364,10.); +#123=VECTOR('',#367,10.); +#124=VECTOR('',#370,10.); +#125=VERTEX_POINT('',#375); +#126=VERTEX_POINT('',#376); +#127=VERTEX_POINT('',#378); +#128=VERTEX_POINT('',#380); +#129=VERTEX_POINT('',#384); +#130=VERTEX_POINT('',#386); +#131=VERTEX_POINT('',#390); +#132=VERTEX_POINT('',#391); +#133=VERTEX_POINT('',#393); +#134=VERTEX_POINT('',#395); +#135=VERTEX_POINT('',#399); +#136=VERTEX_POINT('',#401); +#137=VERTEX_POINT('',#405); +#138=VERTEX_POINT('',#406); +#139=VERTEX_POINT('',#408); +#140=VERTEX_POINT('',#410); +#141=VERTEX_POINT('',#414); +#142=VERTEX_POINT('',#415); +#143=VERTEX_POINT('',#417); +#144=VERTEX_POINT('',#419); +#145=VERTEX_POINT('',#426); +#146=VERTEX_POINT('',#428); +#147=VERTEX_POINT('',#438); +#148=VERTEX_POINT('',#440); +#149=EDGE_CURVE('',#125,#126,#53,.T.); +#150=EDGE_CURVE('',#127,#125,#54,.T.); +#151=EDGE_CURVE('',#128,#127,#55,.T.); +#152=EDGE_CURVE('',#126,#128,#56,.T.); +#153=EDGE_CURVE('',#129,#125,#57,.T.); +#154=EDGE_CURVE('',#130,#129,#58,.T.); +#155=EDGE_CURVE('',#127,#130,#59,.T.); +#156=EDGE_CURVE('',#131,#132,#60,.T.); +#157=EDGE_CURVE('',#133,#131,#61,.T.); +#158=EDGE_CURVE('',#134,#133,#62,.T.); +#159=EDGE_CURVE('',#132,#134,#63,.T.); +#160=EDGE_CURVE('',#135,#131,#64,.T.); +#161=EDGE_CURVE('',#136,#135,#65,.T.); +#162=EDGE_CURVE('',#133,#136,#66,.T.); +#163=EDGE_CURVE('',#137,#138,#67,.T.); +#164=EDGE_CURVE('',#139,#137,#68,.T.); +#165=EDGE_CURVE('',#140,#139,#69,.T.); +#166=EDGE_CURVE('',#138,#140,#70,.T.); +#167=EDGE_CURVE('',#141,#142,#71,.T.); +#168=EDGE_CURVE('',#143,#141,#72,.T.); +#169=EDGE_CURVE('',#144,#143,#73,.T.); +#170=EDGE_CURVE('',#144,#142,#74,.T.); +#171=EDGE_CURVE('',#142,#137,#75,.T.); +#172=EDGE_CURVE('',#139,#144,#76,.T.); +#173=EDGE_CURVE('',#145,#134,#77,.T.); +#174=EDGE_CURVE('',#145,#146,#78,.T.); +#175=EDGE_CURVE('',#146,#132,#79,.T.); +#176=EDGE_CURVE('',#128,#136,#80,.T.); +#177=EDGE_CURVE('',#135,#126,#81,.T.); +#178=EDGE_CURVE('',#146,#141,#82,.T.); +#179=EDGE_CURVE('',#143,#145,#83,.T.); +#180=EDGE_CURVE('',#147,#140,#84,.T.); +#181=EDGE_CURVE('',#148,#147,#85,.T.); +#182=EDGE_CURVE('',#138,#148,#86,.T.); +#183=EDGE_CURVE('',#147,#130,#87,.T.); +#184=EDGE_CURVE('',#148,#129,#88,.T.); +#185=ORIENTED_EDGE('',*,*,#149,.F.); +#186=ORIENTED_EDGE('',*,*,#150,.F.); +#187=ORIENTED_EDGE('',*,*,#151,.F.); +#188=ORIENTED_EDGE('',*,*,#152,.F.); +#189=ORIENTED_EDGE('',*,*,#153,.F.); +#190=ORIENTED_EDGE('',*,*,#154,.F.); +#191=ORIENTED_EDGE('',*,*,#155,.F.); +#192=ORIENTED_EDGE('',*,*,#150,.T.); +#193=ORIENTED_EDGE('',*,*,#156,.F.); +#194=ORIENTED_EDGE('',*,*,#157,.F.); +#195=ORIENTED_EDGE('',*,*,#158,.F.); +#196=ORIENTED_EDGE('',*,*,#159,.F.); +#197=ORIENTED_EDGE('',*,*,#160,.F.); +#198=ORIENTED_EDGE('',*,*,#161,.F.); +#199=ORIENTED_EDGE('',*,*,#162,.F.); +#200=ORIENTED_EDGE('',*,*,#157,.T.); +#201=ORIENTED_EDGE('',*,*,#163,.F.); +#202=ORIENTED_EDGE('',*,*,#164,.F.); +#203=ORIENTED_EDGE('',*,*,#165,.F.); +#204=ORIENTED_EDGE('',*,*,#166,.F.); +#205=ORIENTED_EDGE('',*,*,#167,.F.); +#206=ORIENTED_EDGE('',*,*,#168,.F.); +#207=ORIENTED_EDGE('',*,*,#169,.F.); +#208=ORIENTED_EDGE('',*,*,#170,.T.); +#209=ORIENTED_EDGE('',*,*,#171,.F.); +#210=ORIENTED_EDGE('',*,*,#170,.F.); +#211=ORIENTED_EDGE('',*,*,#172,.F.); +#212=ORIENTED_EDGE('',*,*,#164,.T.); +#213=ORIENTED_EDGE('',*,*,#159,.T.); +#214=ORIENTED_EDGE('',*,*,#173,.F.); +#215=ORIENTED_EDGE('',*,*,#174,.T.); +#216=ORIENTED_EDGE('',*,*,#175,.T.); +#217=ORIENTED_EDGE('',*,*,#152,.T.); +#218=ORIENTED_EDGE('',*,*,#176,.T.); +#219=ORIENTED_EDGE('',*,*,#161,.T.); +#220=ORIENTED_EDGE('',*,*,#177,.T.); +#221=ORIENTED_EDGE('',*,*,#168,.T.); +#222=ORIENTED_EDGE('',*,*,#178,.F.); +#223=ORIENTED_EDGE('',*,*,#174,.F.); +#224=ORIENTED_EDGE('',*,*,#179,.F.); +#225=ORIENTED_EDGE('',*,*,#166,.T.); +#226=ORIENTED_EDGE('',*,*,#180,.F.); +#227=ORIENTED_EDGE('',*,*,#181,.F.); +#228=ORIENTED_EDGE('',*,*,#182,.F.); +#229=ORIENTED_EDGE('',*,*,#151,.T.); +#230=ORIENTED_EDGE('',*,*,#155,.T.); +#231=ORIENTED_EDGE('',*,*,#183,.F.); +#232=ORIENTED_EDGE('',*,*,#180,.T.); +#233=ORIENTED_EDGE('',*,*,#165,.T.); +#234=ORIENTED_EDGE('',*,*,#172,.T.); +#235=ORIENTED_EDGE('',*,*,#169,.T.); +#236=ORIENTED_EDGE('',*,*,#179,.T.); +#237=ORIENTED_EDGE('',*,*,#173,.T.); +#238=ORIENTED_EDGE('',*,*,#158,.T.); +#239=ORIENTED_EDGE('',*,*,#162,.T.); +#240=ORIENTED_EDGE('',*,*,#176,.F.); +#241=ORIENTED_EDGE('',*,*,#149,.T.); +#242=ORIENTED_EDGE('',*,*,#177,.F.); +#243=ORIENTED_EDGE('',*,*,#160,.T.); +#244=ORIENTED_EDGE('',*,*,#156,.T.); +#245=ORIENTED_EDGE('',*,*,#175,.F.); +#246=ORIENTED_EDGE('',*,*,#178,.T.); +#247=ORIENTED_EDGE('',*,*,#167,.T.); +#248=ORIENTED_EDGE('',*,*,#171,.T.); +#249=ORIENTED_EDGE('',*,*,#163,.T.); +#250=ORIENTED_EDGE('',*,*,#182,.T.); +#251=ORIENTED_EDGE('',*,*,#184,.T.); +#252=ORIENTED_EDGE('',*,*,#153,.T.); +#253=ORIENTED_EDGE('',*,*,#154,.T.); +#254=ORIENTED_EDGE('',*,*,#184,.F.); +#255=ORIENTED_EDGE('',*,*,#181,.T.); +#256=ORIENTED_EDGE('',*,*,#183,.T.); +#257=PLANE('',#293); +#258=PLANE('',#294); +#259=PLANE('',#295); +#260=PLANE('',#296); +#261=PLANE('',#297); +#262=PLANE('',#298); +#263=PLANE('',#299); +#264=PLANE('',#300); +#265=PLANE('',#301); +#266=PLANE('',#302); +#267=PLANE('',#303); +#268=PLANE('',#304); +#269=PLANE('',#305); +#270=PLANE('',#306); +#271=ADVANCED_FACE('',(#25),#257,.F.); +#272=ADVANCED_FACE('',(#26),#258,.F.); +#273=ADVANCED_FACE('',(#27),#259,.F.); +#274=ADVANCED_FACE('',(#28),#260,.F.); +#275=ADVANCED_FACE('',(#29),#261,.F.); +#276=ADVANCED_FACE('',(#30),#262,.F.); +#277=ADVANCED_FACE('',(#31),#263,.F.); +#278=ADVANCED_FACE('',(#32),#264,.T.); +#279=ADVANCED_FACE('',(#33),#265,.T.); +#280=ADVANCED_FACE('',(#34),#266,.F.); +#281=ADVANCED_FACE('',(#35),#267,.F.); +#282=ADVANCED_FACE('',(#36),#268,.T.); +#283=ADVANCED_FACE('',(#37),#269,.T.); +#284=ADVANCED_FACE('',(#38),#270,.T.); +#285=CLOSED_SHELL('',(#271,#272,#273,#274,#275,#276,#277,#278,#279,#280, +#281,#282,#283,#284)); +#286=DATE_TIME_ROLE('creation_date'); +#287=APPLIED_DATE_AND_TIME_ASSIGNMENT(#288,#286,(#462)); +#288=DATE_AND_TIME(#289,#290); +#289=CALENDAR_DATE(2019,30,6); +#290=LOCAL_TIME(22,0,0.,#291); +#291=COORDINATED_UNIVERSAL_TIME_OFFSET(0,0,.BEHIND.); +#292=AXIS2_PLACEMENT_3D('placement',#373,#307,#308); +#293=AXIS2_PLACEMENT_3D('',#374,#309,#310); +#294=AXIS2_PLACEMENT_3D('',#383,#315,#316); +#295=AXIS2_PLACEMENT_3D('',#389,#320,#321); +#296=AXIS2_PLACEMENT_3D('',#398,#326,#327); +#297=AXIS2_PLACEMENT_3D('',#404,#331,#332); +#298=AXIS2_PLACEMENT_3D('',#413,#337,#338); +#299=AXIS2_PLACEMENT_3D('',#422,#343,#344); +#300=AXIS2_PLACEMENT_3D('',#425,#347,#348); +#301=AXIS2_PLACEMENT_3D('',#431,#352,#353); +#302=AXIS2_PLACEMENT_3D('',#434,#356,#357); +#303=AXIS2_PLACEMENT_3D('',#437,#360,#361); +#304=AXIS2_PLACEMENT_3D('',#443,#365,#366); +#305=AXIS2_PLACEMENT_3D('',#445,#368,#369); +#306=AXIS2_PLACEMENT_3D('',#447,#371,#372); +#307=DIRECTION('axis',(0.,0.,1.)); +#308=DIRECTION('refdir',(1.,0.,0.)); +#309=DIRECTION('center_axis',(-1.79068229778251E-16,1.,0.)); +#310=DIRECTION('ref_axis',(0.,0.,-1.)); +#311=DIRECTION('',(0.,0.,1.)); +#312=DIRECTION('',(-1.,-1.79068229778251E-16,0.)); +#313=DIRECTION('',(0.,0.,-1.)); +#314=DIRECTION('',(1.,1.79068229778251E-16,0.)); +#315=DIRECTION('center_axis',(-8.28356965327843E-32,4.62592926927149E-16, +-1.)); +#316=DIRECTION('ref_axis',(1.77635683940025E-16,-1.,-4.6074255521944E-16)); +#317=DIRECTION('',(-3.96292026025416E-16,1.,4.62592926927149E-16)); +#318=DIRECTION('',(-1.,0.,8.28356965327843E-32)); +#319=DIRECTION('',(1.79068229778251E-16,-1.,-4.62592926927149E-16)); +#320=DIRECTION('center_axis',(0.,0.,-1.)); +#321=DIRECTION('ref_axis',(1.77635683940025E-16,-1.,0.)); +#322=DIRECTION('',(-3.96292026025416E-16,1.,0.)); +#323=DIRECTION('',(-1.,-2.17690789142187E-16,0.)); +#324=DIRECTION('',(1.79068229778251E-16,-1.,0.)); +#325=DIRECTION('',(1.,0.,0.)); +#326=DIRECTION('center_axis',(2.17690789142187E-16,-1.,0.)); +#327=DIRECTION('ref_axis',(0.,0.,1.)); +#328=DIRECTION('',(0.,0.,-1.)); +#329=DIRECTION('',(-1.,-2.17690789142187E-16,0.)); +#330=DIRECTION('',(0.,0.,1.)); +#331=DIRECTION('center_axis',(1.90479440499414E-16,-1.,0.)); +#332=DIRECTION('ref_axis',(0.,0.,1.)); +#333=DIRECTION('',(0.,0.,-1.)); +#334=DIRECTION('',(-1.,-1.90479440499414E-16,0.)); +#335=DIRECTION('',(0.,0.,1.)); +#336=DIRECTION('',(1.,1.90479440499414E-16,0.)); +#337=DIRECTION('center_axis',(-1.90479440499414E-16,1.,5.55111512312578E-14)); +#338=DIRECTION('ref_axis',(0.,5.55111512312578E-14,-1.)); +#339=DIRECTION('',(2.19986265884384E-29,-5.55111512312578E-14,1.)); +#340=DIRECTION('',(-1.,-1.90479440499414E-16,0.)); +#341=DIRECTION('',(-9.94028358393412E-30,5.55111512312578E-14,-1.)); +#342=DIRECTION('',(-1.,-1.90479440499414E-16,0.)); +#343=DIRECTION('center_axis',(3.84776057968231E-32,-2.0200398371572E-16, +1.)); +#344=DIRECTION('ref_axis',(-1.77635683940025E-16,1.,2.02008548777499E-16)); +#345=DIRECTION('',(3.96292026025416E-16,-1.,-2.0200398371572E-16)); +#346=DIRECTION('',(-1.79068229778251E-16,1.,2.0200398371572E-16)); +#347=DIRECTION('center_axis',(0.,1.,0.)); +#348=DIRECTION('ref_axis',(-1.,0.,0.)); +#349=DIRECTION('',(0.,0.,1.)); +#350=DIRECTION('',(-1.,0.,0.)); +#351=DIRECTION('',(0.,0.,1.)); +#352=DIRECTION('center_axis',(0.,0.,1.)); +#353=DIRECTION('ref_axis',(1.,0.,0.)); +#354=DIRECTION('',(-1.79068229778251E-16,1.,0.)); +#355=DIRECTION('',(3.96292026025416E-16,-1.,0.)); +#356=DIRECTION('center_axis',(0.,0.,1.)); +#357=DIRECTION('ref_axis',(1.,0.,0.)); +#358=DIRECTION('',(3.96292026025416E-16,-1.,0.)); +#359=DIRECTION('',(-1.79068229778251E-16,1.,0.)); +#360=DIRECTION('center_axis',(0.,0.,1.)); +#361=DIRECTION('ref_axis',(1.,0.,0.)); +#362=DIRECTION('',(-1.79068229778251E-16,1.,0.)); +#363=DIRECTION('',(1.,0.,0.)); +#364=DIRECTION('',(3.96292026025416E-16,-1.,0.)); +#365=DIRECTION('center_axis',(1.,1.79068229778251E-16,0.)); +#366=DIRECTION('ref_axis',(-1.77635683940025E-16,1.,0.)); +#367=DIRECTION('',(0.,0.,1.)); +#368=DIRECTION('center_axis',(-1.,-3.96292026025416E-16,0.)); +#369=DIRECTION('ref_axis',(3.96292026025416E-16,-1.,0.)); +#370=DIRECTION('',(0.,0.,1.)); +#371=DIRECTION('center_axis',(0.,-1.,0.)); +#372=DIRECTION('ref_axis',(1.,0.,0.)); +#373=CARTESIAN_POINT('',(0.,0.,0.)); +#374=CARTESIAN_POINT('Origin',(0.85,0.3,0.45)); +#375=CARTESIAN_POINT('',(0.,0.3,0.445)); +#376=CARTESIAN_POINT('',(0.,0.3,0.45)); +#377=CARTESIAN_POINT('',(-1.38777878078145E-16,0.3,0.225)); +#378=CARTESIAN_POINT('',(0.85,0.3,0.445)); +#379=CARTESIAN_POINT('',(0.85,0.3,0.445)); +#380=CARTESIAN_POINT('',(0.85,0.3,0.45)); +#381=CARTESIAN_POINT('',(0.85,0.3,0.225)); +#382=CARTESIAN_POINT('',(0.6375,0.3,0.45)); +#383=CARTESIAN_POINT('Origin',(0.85,0.3,0.445)); +#384=CARTESIAN_POINT('',(0.,-1.45983671529924E-16,0.445)); +#385=CARTESIAN_POINT('',(-3.46944695195361E-16,0.925,0.445)); +#386=CARTESIAN_POINT('',(0.85,6.22432378158933E-18,0.445)); +#387=CARTESIAN_POINT('',(0.425,0.,0.445)); +#388=CARTESIAN_POINT('',(0.85,0.15,0.445)); +#389=CARTESIAN_POINT('Origin',(0.85,1.55,0.445)); +#390=CARTESIAN_POINT('',(-4.16333634234434E-16,1.25,0.445)); +#391=CARTESIAN_POINT('',(-5.55111512312578E-16,1.55,0.445)); +#392=CARTESIAN_POINT('',(-6.24500451351651E-16,1.55,0.445)); +#393=CARTESIAN_POINT('',(0.85,1.25,0.445)); +#394=CARTESIAN_POINT('',(0.85,1.25,0.445)); +#395=CARTESIAN_POINT('',(0.85,1.55,0.445)); +#396=CARTESIAN_POINT('',(0.85,0.775,0.445)); +#397=CARTESIAN_POINT('',(0.85,1.55,0.445)); +#398=CARTESIAN_POINT('Origin',(0.85,1.25,0.445)); +#399=CARTESIAN_POINT('',(-4.16333634234434E-16,1.25,0.45)); +#400=CARTESIAN_POINT('',(-4.85722573273506E-16,1.25,0.2225)); +#401=CARTESIAN_POINT('',(0.85,1.25,0.45)); +#402=CARTESIAN_POINT('',(0.6375,1.25,0.45)); +#403=CARTESIAN_POINT('',(0.85,1.25,0.2225)); +#404=CARTESIAN_POINT('Origin',(0.85,0.3,0.)); +#405=CARTESIAN_POINT('',(0.,0.3,0.00500000000000009)); +#406=CARTESIAN_POINT('',(0.,0.3,0.)); +#407=CARTESIAN_POINT('',(-1.38777878078145E-16,0.3,0.)); +#408=CARTESIAN_POINT('',(0.85,0.3,0.00500000000000009)); +#409=CARTESIAN_POINT('',(0.85,0.3,0.00500000000000009)); +#410=CARTESIAN_POINT('',(0.85,0.3,0.)); +#411=CARTESIAN_POINT('',(0.85,0.3,0.)); +#412=CARTESIAN_POINT('',(0.6375,0.3,0.)); +#413=CARTESIAN_POINT('Origin',(0.85,1.25,0.00500000000000028)); +#414=CARTESIAN_POINT('',(-4.16333634234434E-16,1.25,2.81892564846231E-16)); +#415=CARTESIAN_POINT('',(-4.16333634234434E-16,1.25,0.00500000000000028)); +#416=CARTESIAN_POINT('',(-4.85722573273506E-16,1.25,0.00249999999999181)); +#417=CARTESIAN_POINT('',(0.85,1.25,2.81892564846231E-16)); +#418=CARTESIAN_POINT('',(0.6375,1.25,0.)); +#419=CARTESIAN_POINT('',(0.85,1.25,0.00500000000000028)); +#420=CARTESIAN_POINT('',(0.85,1.25,0.00250000000003484)); +#421=CARTESIAN_POINT('',(0.85,1.25,0.00500000000000028)); +#422=CARTESIAN_POINT('Origin',(0.85,0.3,0.00500000000000009)); +#423=CARTESIAN_POINT('',(-3.46944695195361E-16,0.925,0.00500000000000022)); +#424=CARTESIAN_POINT('',(0.85,0.15,0.00500000000000006)); +#425=CARTESIAN_POINT('Origin',(0.85,1.55,0.)); +#426=CARTESIAN_POINT('',(0.85,1.55,0.)); +#427=CARTESIAN_POINT('',(0.85,1.55,0.)); +#428=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.)); +#429=CARTESIAN_POINT('',(0.85,1.55,0.)); +#430=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.)); +#431=CARTESIAN_POINT('Origin',(0.425,0.775,0.45)); +#432=CARTESIAN_POINT('',(0.85,0.,0.45)); +#433=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.45)); +#434=CARTESIAN_POINT('Origin',(0.425,0.775,0.)); +#435=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.)); +#436=CARTESIAN_POINT('',(0.85,0.,0.)); +#437=CARTESIAN_POINT('Origin',(0.425,0.775,0.)); +#438=CARTESIAN_POINT('',(0.85,0.,0.)); +#439=CARTESIAN_POINT('',(0.85,0.,0.)); +#440=CARTESIAN_POINT('',(0.,0.,0.)); +#441=CARTESIAN_POINT('',(0.,0.,0.)); +#442=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.)); +#443=CARTESIAN_POINT('Origin',(0.85,0.,0.)); +#444=CARTESIAN_POINT('',(0.85,0.,0.)); +#445=CARTESIAN_POINT('Origin',(-6.14252640339395E-16,1.55,0.)); +#446=CARTESIAN_POINT('',(0.,0.,0.)); +#447=CARTESIAN_POINT('Origin',(0.,0.,0.)); +#448=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#452, +'DISTANCE_ACCURACY_VALUE', +'Maximum model space distance between geometric entities at asserted c +onnectivities'); +#449=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-6),#452, +'DISTANCE_ACCURACY_VALUE', +'Maximum model space distance between geometric entities at asserted c +onnectivities'); +#450=( +GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#448)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#452,#455,#453)) +REPRESENTATION_CONTEXT('','3D') +); +#451=( +GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#449)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#452,#455,#453)) +REPRESENTATION_CONTEXT('','3D') +); +#452=( +LENGTH_UNIT() +NAMED_UNIT(*) +SI_UNIT(.MILLI.,.METRE.) +); +#453=( +NAMED_UNIT(*) +SI_UNIT($,.STERADIAN.) +SOLID_ANGLE_UNIT() +); +#454=DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.); +#455=( +CONVERSION_BASED_UNIT('degree',#457) +NAMED_UNIT(#454) +PLANE_ANGLE_UNIT() +); +#456=( +NAMED_UNIT(*) +PLANE_ANGLE_UNIT() +SI_UNIT($,.RADIAN.) +); +#457=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.01745329252),#456); +#458=SHAPE_DEFINITION_REPRESENTATION(#459,#460); +#459=PRODUCT_DEFINITION_SHAPE('',$,#462); +#460=SHAPE_REPRESENTATION('',(#292),#450); +#461=PRODUCT_DEFINITION_CONTEXT('part definition',#466,'design'); +#462=PRODUCT_DEFINITION('0603','0603',#463,#461); +#463=PRODUCT_DEFINITION_FORMATION('',$,#468); +#464=PRODUCT_RELATED_PRODUCT_CATEGORY('0603','0603',(#468)); +#465=APPLICATION_PROTOCOL_DEFINITION('international standard', +'automotive_design',2009,#466); +#466=APPLICATION_CONTEXT( +'Core Data for Automotive Mechanical Design Process'); +#467=PRODUCT_CONTEXT('part definition',#466,'mechanical'); +#468=PRODUCT('0603','0603',$,(#467)); +#469=PRESENTATION_STYLE_ASSIGNMENT((#473)); +#470=PRESENTATION_STYLE_ASSIGNMENT((#474)); +#471=PRESENTATION_STYLE_ASSIGNMENT((#475)); +#472=PRESENTATION_STYLE_ASSIGNMENT((#476)); +#473=SURFACE_STYLE_USAGE(.BOTH.,#477); +#474=SURFACE_STYLE_USAGE(.BOTH.,#478); +#475=SURFACE_STYLE_USAGE(.BOTH.,#479); +#476=SURFACE_STYLE_USAGE(.BOTH.,#480); +#477=SURFACE_SIDE_STYLE('',(#481)); +#478=SURFACE_SIDE_STYLE('',(#482)); +#479=SURFACE_SIDE_STYLE('',(#483)); +#480=SURFACE_SIDE_STYLE('',(#484)); +#481=SURFACE_STYLE_FILL_AREA(#485); +#482=SURFACE_STYLE_FILL_AREA(#486); +#483=SURFACE_STYLE_FILL_AREA(#487); +#484=SURFACE_STYLE_FILL_AREA(#488); +#485=FILL_AREA_STYLE('',(#489)); +#486=FILL_AREA_STYLE('',(#490)); +#487=FILL_AREA_STYLE('',(#491)); +#488=FILL_AREA_STYLE('',(#492)); +#489=FILL_AREA_STYLE_COLOUR('',#493); +#490=FILL_AREA_STYLE_COLOUR('',#494); +#491=FILL_AREA_STYLE_COLOUR('',#495); +#492=FILL_AREA_STYLE_COLOUR('',#496); +#493=COLOUR_RGB('',0.749019607843137,0.749019607843137,0.749019607843137); +#494=COLOUR_RGB('',0.831372549019608,0.831372549019608,0.831372549019608); +#495=COLOUR_RGB('',0.988235294117647,1.,1.); +#496=COLOUR_RGB('',0.0784313725490196,0.43921568627451,0.); +ENDSEC; +END-ISO-10303-21;
canonical-export/TNPW060317K8BEEA.kicad_modadded+30@@ -0,0 +1,30 @@+(footprint "TNPW060317K8BEEA"+ (version 20240108)+ (generator "adom-lbr")+ (generator_version "8.0")+ (layer "F.Cu")+ (attr smd)+ (fp_text reference "REF**" (at 0 -2.16 0) (layer "F.SilkS")+ (effects (font (size 1 1) (thickness 0.15)))+ )+ (fp_text value "TNPW060317K8BEEA" (at 0 1.81 0) (layer "F.Fab")+ (effects (font (size 1 1) (thickness 0.15)))+ )+ (fp_line (start -1.25 -0.75) (end 1.25 -0.75)+ (stroke (width 0.12) (type default)) (layer "F.SilkS"))+ (fp_line (start -1.25 0.75) (end 1.25 0.75)+ (stroke (width 0.12) (type default)) (layer "F.SilkS"))+ (fp_rect (start -1.5 -0.75) (end 1.5 0.75)+ (stroke (width 0.05) (type default)) (fill none) (layer "F.CrtYd"))+ (fp_rect (start -0.775 -0.425) (end 0.775 0.425)+ (stroke (width 0.1) (type default)) (fill none) (layer "F.Fab"))+ (fp_circle (center -1.05 -1.05) (end -0.99 -1.05)+ (stroke (width 0.1) (type default)) (fill none) (layer "F.SilkS"))+ (pad "1" smd rect (at -0.8 0) (size 0.9 1) (layers "F.Cu" "F.Paste" "F.Mask"))+ (pad "2" smd rect (at 0.8 0) (size 0.9 1) (layers "F.Cu" "F.Paste" "F.Mask"))+ (model "TNPW_e3_0603.stp"+ (offset (xyz -0.775 0.425 0))+ (scale (xyz 1 1 1))+ (rotate (xyz 0 0 90))+ )+)
canonical-export/TNPW060317K8BEEA.kicad_symadded+117@@ -0,0 +1,117 @@+(kicad_symbol_lib+ (version 20231120)+ (generator "adom-lbr")+ (generator_version "8.0")+ (symbol "TNPW060317K8BEEA"+ (pin_numbers (hide yes))+ (pin_names (offset 0.254))+ (exclude_from_sim no)+ (in_bom yes)+ (on_board yes)+ (property "Reference" "R"+ (at 0 5.08 0)+ (effects (font (size 1.27 1.27)))+ )+ (property "Value" "17.8k"+ (at 0 -5.08 0)+ (effects (font (size 1.27 1.27)))+ )+ (property "Footprint" "TNPW060317K8BEEA"+ (at 0 -7.62 0)+ (effects (font (size 1.27 1.27)) (hide yes))+ )+ (property "Datasheet" "https://www.vishay.com/docs/28758/tnpw_e3.pdf"+ (at 0 -10.16 0)+ (effects (font (size 1.27 1.27)) (hide yes))+ )+ (property "Description" "Vishay TNPW e3 17.8k ohm 0.1% 25 ppm/K, 0603; nonpolar"+ (at 0 -12.7 0)+ (effects (font (size 1.27 1.27)))+ )+ (property "ki_keywords" "R res resistor"+ (at 0 -15.24 0)+ (effects (font (size 1.27 1.27)))+ )+ (property "ki_fp_filters" "R_*"+ (at 0 -17.78 0)+ (effects (font (size 1.27 1.27)))+ )+ (property "Manufacturer" "Vishay"+ (at 0 -20.32 0)+ (effects (font (size 1.27 1.27)) (hide yes))+ )+ (property "Manufacturer Part Number" "TNPW060317K8BEEA"+ (at 0 -22.86 0)+ (effects (font (size 1.27 1.27)) (hide yes))+ )+ (property "Package" "0603"+ (at 0 -25.4 0)+ (effects (font (size 1.27 1.27)) (hide yes))+ )+ (symbol "TNPW060317K8BEEA_0_1"+ (polyline+ (pts+ (xy 0 2.286)+ (xy 0 2.54)+ )+ (stroke (width 0) (type default))+ (fill (type none))+ )+ (polyline+ (pts+ (xy 0 2.286)+ (xy 1.016 1.905)+ (xy 0 1.524)+ (xy -1.016 1.143)+ (xy 0 0.762)+ )+ (stroke (width 0) (type default))+ (fill (type none))+ )+ (polyline+ (pts+ (xy 0 0.762)+ (xy 1.016 0.381)+ (xy 0 0)+ (xy -1.016 -0.381)+ (xy 0 -0.762)+ )+ (stroke (width 0) (type default))+ (fill (type none))+ )+ (polyline+ (pts+ (xy 0 -0.762)+ (xy 1.016 -1.143)+ (xy 0 -1.524)+ (xy -1.016 -1.905)+ (xy 0 -2.286)+ )+ (stroke (width 0) (type default))+ (fill (type none))+ )+ (polyline+ (pts+ (xy 0 -2.286)+ (xy 0 -2.54)+ )+ (stroke (width 0) (type default))+ (fill (type none))+ )+ )+ (symbol "TNPW060317K8BEEA_1_1"+ (pin passive line+ (at 0 3.81 270)+ (length 1.27)+ (name "" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin passive line+ (at 0 -3.81 90)+ (length 1.27)+ (name "" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
canonical-export/TNPW_e3_0603.stpadded+553@@ -0,0 +1,553 @@+ISO-10303-21; +HEADER; +/* Generated by software containing ST-Developer + * from STEP Tools, Inc. (www.steptools.com) + */ + +FILE_DESCRIPTION( +/* description */ (''), +/* implementation_level */ '2;1'); + +FILE_NAME( +/* name */ '\\\\wsse03\\home\\msaalfrank\\Konstruktion\\tknuschke\\060 +3.stp', +/* time_stamp */ '2020-11-09T12:41:58+01:00', +/* author */ ('msaalfrank'), +/* organization */ (''), +/* preprocessor_version */ 'ST-DEVELOPER v16.5', +/* originating_system */ 'Autodesk Inventor 2017', +/* authorisation */ ''); + +FILE_SCHEMA (('AUTOMOTIVE_DESIGN { 1 0 10303 214 3 1 1 }')); +ENDSEC; + +DATA; +#10=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#15,#14, +#16,#17,#18,#19,#20,#23,#21,#22,#24),#451); +#11=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#460,#12); +#12=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#13),#450); +#13=MANIFOLD_SOLID_BREP('Volumenk\X\F6rper1',#285); +#14=STYLED_ITEM('',(#470),#272); +#15=STYLED_ITEM('',(#470),#273); +#16=STYLED_ITEM('',(#471),#277); +#17=STYLED_ITEM('',(#470),#278); +#18=STYLED_ITEM('',(#472),#279); +#19=STYLED_ITEM('',(#470),#280); +#20=STYLED_ITEM('',(#470),#281); +#21=STYLED_ITEM('',(#471),#282); +#22=STYLED_ITEM('',(#471),#283); +#23=STYLED_ITEM('',(#470),#284); +#24=STYLED_ITEM('',(#469),#13); +#25=FACE_OUTER_BOUND('',#39,.T.); +#26=FACE_OUTER_BOUND('',#40,.T.); +#27=FACE_OUTER_BOUND('',#41,.T.); +#28=FACE_OUTER_BOUND('',#42,.T.); +#29=FACE_OUTER_BOUND('',#43,.T.); +#30=FACE_OUTER_BOUND('',#44,.T.); +#31=FACE_OUTER_BOUND('',#45,.T.); +#32=FACE_OUTER_BOUND('',#46,.T.); +#33=FACE_OUTER_BOUND('',#47,.T.); +#34=FACE_OUTER_BOUND('',#48,.T.); +#35=FACE_OUTER_BOUND('',#49,.T.); +#36=FACE_OUTER_BOUND('',#50,.T.); +#37=FACE_OUTER_BOUND('',#51,.T.); +#38=FACE_OUTER_BOUND('',#52,.T.); +#39=EDGE_LOOP('',(#185,#186,#187,#188)); +#40=EDGE_LOOP('',(#189,#190,#191,#192)); +#41=EDGE_LOOP('',(#193,#194,#195,#196)); +#42=EDGE_LOOP('',(#197,#198,#199,#200)); +#43=EDGE_LOOP('',(#201,#202,#203,#204)); +#44=EDGE_LOOP('',(#205,#206,#207,#208)); +#45=EDGE_LOOP('',(#209,#210,#211,#212)); +#46=EDGE_LOOP('',(#213,#214,#215,#216)); +#47=EDGE_LOOP('',(#217,#218,#219,#220)); +#48=EDGE_LOOP('',(#221,#222,#223,#224)); +#49=EDGE_LOOP('',(#225,#226,#227,#228)); +#50=EDGE_LOOP('',(#229,#230,#231,#232,#233,#234,#235,#236,#237,#238,#239, +#240)); +#51=EDGE_LOOP('',(#241,#242,#243,#244,#245,#246,#247,#248,#249,#250,#251, +#252)); +#52=EDGE_LOOP('',(#253,#254,#255,#256)); +#53=LINE('',#377,#89); +#54=LINE('',#379,#90); +#55=LINE('',#381,#91); +#56=LINE('',#382,#92); +#57=LINE('',#385,#93); +#58=LINE('',#387,#94); +#59=LINE('',#388,#95); +#60=LINE('',#392,#96); +#61=LINE('',#394,#97); +#62=LINE('',#396,#98); +#63=LINE('',#397,#99); +#64=LINE('',#400,#100); +#65=LINE('',#402,#101); +#66=LINE('',#403,#102); +#67=LINE('',#407,#103); +#68=LINE('',#409,#104); +#69=LINE('',#411,#105); +#70=LINE('',#412,#106); +#71=LINE('',#416,#107); +#72=LINE('',#418,#108); +#73=LINE('',#420,#109); +#74=LINE('',#421,#110); +#75=LINE('',#423,#111); +#76=LINE('',#424,#112); +#77=LINE('',#427,#113); +#78=LINE('',#429,#114); +#79=LINE('',#430,#115); +#80=LINE('',#432,#116); +#81=LINE('',#433,#117); +#82=LINE('',#435,#118); +#83=LINE('',#436,#119); +#84=LINE('',#439,#120); +#85=LINE('',#441,#121); +#86=LINE('',#442,#122); +#87=LINE('',#444,#123); +#88=LINE('',#446,#124); +#89=VECTOR('',#311,10.); +#90=VECTOR('',#312,10.); +#91=VECTOR('',#313,10.); +#92=VECTOR('',#314,10.); +#93=VECTOR('',#317,10.); +#94=VECTOR('',#318,10.); +#95=VECTOR('',#319,10.); +#96=VECTOR('',#322,10.); +#97=VECTOR('',#323,10.); +#98=VECTOR('',#324,10.); +#99=VECTOR('',#325,10.); +#100=VECTOR('',#328,10.); +#101=VECTOR('',#329,10.); +#102=VECTOR('',#330,10.); +#103=VECTOR('',#333,10.); +#104=VECTOR('',#334,10.); +#105=VECTOR('',#335,10.); +#106=VECTOR('',#336,10.); +#107=VECTOR('',#339,10.); +#108=VECTOR('',#340,10.); +#109=VECTOR('',#341,10.); +#110=VECTOR('',#342,10.); +#111=VECTOR('',#345,10.); +#112=VECTOR('',#346,10.); +#113=VECTOR('',#349,10.); +#114=VECTOR('',#350,10.); +#115=VECTOR('',#351,10.); +#116=VECTOR('',#354,10.); +#117=VECTOR('',#355,10.); +#118=VECTOR('',#358,10.); +#119=VECTOR('',#359,10.); +#120=VECTOR('',#362,10.); +#121=VECTOR('',#363,10.); +#122=VECTOR('',#364,10.); +#123=VECTOR('',#367,10.); +#124=VECTOR('',#370,10.); +#125=VERTEX_POINT('',#375); +#126=VERTEX_POINT('',#376); +#127=VERTEX_POINT('',#378); +#128=VERTEX_POINT('',#380); +#129=VERTEX_POINT('',#384); +#130=VERTEX_POINT('',#386); +#131=VERTEX_POINT('',#390); +#132=VERTEX_POINT('',#391); +#133=VERTEX_POINT('',#393); +#134=VERTEX_POINT('',#395); +#135=VERTEX_POINT('',#399); +#136=VERTEX_POINT('',#401); +#137=VERTEX_POINT('',#405); +#138=VERTEX_POINT('',#406); +#139=VERTEX_POINT('',#408); +#140=VERTEX_POINT('',#410); +#141=VERTEX_POINT('',#414); +#142=VERTEX_POINT('',#415); +#143=VERTEX_POINT('',#417); +#144=VERTEX_POINT('',#419); +#145=VERTEX_POINT('',#426); +#146=VERTEX_POINT('',#428); +#147=VERTEX_POINT('',#438); +#148=VERTEX_POINT('',#440); +#149=EDGE_CURVE('',#125,#126,#53,.T.); +#150=EDGE_CURVE('',#127,#125,#54,.T.); +#151=EDGE_CURVE('',#128,#127,#55,.T.); +#152=EDGE_CURVE('',#126,#128,#56,.T.); +#153=EDGE_CURVE('',#129,#125,#57,.T.); +#154=EDGE_CURVE('',#130,#129,#58,.T.); +#155=EDGE_CURVE('',#127,#130,#59,.T.); +#156=EDGE_CURVE('',#131,#132,#60,.T.); +#157=EDGE_CURVE('',#133,#131,#61,.T.); +#158=EDGE_CURVE('',#134,#133,#62,.T.); +#159=EDGE_CURVE('',#132,#134,#63,.T.); +#160=EDGE_CURVE('',#135,#131,#64,.T.); +#161=EDGE_CURVE('',#136,#135,#65,.T.); +#162=EDGE_CURVE('',#133,#136,#66,.T.); +#163=EDGE_CURVE('',#137,#138,#67,.T.); +#164=EDGE_CURVE('',#139,#137,#68,.T.); +#165=EDGE_CURVE('',#140,#139,#69,.T.); +#166=EDGE_CURVE('',#138,#140,#70,.T.); +#167=EDGE_CURVE('',#141,#142,#71,.T.); +#168=EDGE_CURVE('',#143,#141,#72,.T.); +#169=EDGE_CURVE('',#144,#143,#73,.T.); +#170=EDGE_CURVE('',#144,#142,#74,.T.); +#171=EDGE_CURVE('',#142,#137,#75,.T.); +#172=EDGE_CURVE('',#139,#144,#76,.T.); +#173=EDGE_CURVE('',#145,#134,#77,.T.); +#174=EDGE_CURVE('',#145,#146,#78,.T.); +#175=EDGE_CURVE('',#146,#132,#79,.T.); +#176=EDGE_CURVE('',#128,#136,#80,.T.); +#177=EDGE_CURVE('',#135,#126,#81,.T.); +#178=EDGE_CURVE('',#146,#141,#82,.T.); +#179=EDGE_CURVE('',#143,#145,#83,.T.); +#180=EDGE_CURVE('',#147,#140,#84,.T.); +#181=EDGE_CURVE('',#148,#147,#85,.T.); +#182=EDGE_CURVE('',#138,#148,#86,.T.); +#183=EDGE_CURVE('',#147,#130,#87,.T.); +#184=EDGE_CURVE('',#148,#129,#88,.T.); +#185=ORIENTED_EDGE('',*,*,#149,.F.); +#186=ORIENTED_EDGE('',*,*,#150,.F.); +#187=ORIENTED_EDGE('',*,*,#151,.F.); +#188=ORIENTED_EDGE('',*,*,#152,.F.); +#189=ORIENTED_EDGE('',*,*,#153,.F.); +#190=ORIENTED_EDGE('',*,*,#154,.F.); +#191=ORIENTED_EDGE('',*,*,#155,.F.); +#192=ORIENTED_EDGE('',*,*,#150,.T.); +#193=ORIENTED_EDGE('',*,*,#156,.F.); +#194=ORIENTED_EDGE('',*,*,#157,.F.); +#195=ORIENTED_EDGE('',*,*,#158,.F.); +#196=ORIENTED_EDGE('',*,*,#159,.F.); +#197=ORIENTED_EDGE('',*,*,#160,.F.); +#198=ORIENTED_EDGE('',*,*,#161,.F.); +#199=ORIENTED_EDGE('',*,*,#162,.F.); +#200=ORIENTED_EDGE('',*,*,#157,.T.); +#201=ORIENTED_EDGE('',*,*,#163,.F.); +#202=ORIENTED_EDGE('',*,*,#164,.F.); +#203=ORIENTED_EDGE('',*,*,#165,.F.); +#204=ORIENTED_EDGE('',*,*,#166,.F.); +#205=ORIENTED_EDGE('',*,*,#167,.F.); +#206=ORIENTED_EDGE('',*,*,#168,.F.); +#207=ORIENTED_EDGE('',*,*,#169,.F.); +#208=ORIENTED_EDGE('',*,*,#170,.T.); +#209=ORIENTED_EDGE('',*,*,#171,.F.); +#210=ORIENTED_EDGE('',*,*,#170,.F.); +#211=ORIENTED_EDGE('',*,*,#172,.F.); +#212=ORIENTED_EDGE('',*,*,#164,.T.); +#213=ORIENTED_EDGE('',*,*,#159,.T.); +#214=ORIENTED_EDGE('',*,*,#173,.F.); +#215=ORIENTED_EDGE('',*,*,#174,.T.); +#216=ORIENTED_EDGE('',*,*,#175,.T.); +#217=ORIENTED_EDGE('',*,*,#152,.T.); +#218=ORIENTED_EDGE('',*,*,#176,.T.); +#219=ORIENTED_EDGE('',*,*,#161,.T.); +#220=ORIENTED_EDGE('',*,*,#177,.T.); +#221=ORIENTED_EDGE('',*,*,#168,.T.); +#222=ORIENTED_EDGE('',*,*,#178,.F.); +#223=ORIENTED_EDGE('',*,*,#174,.F.); +#224=ORIENTED_EDGE('',*,*,#179,.F.); +#225=ORIENTED_EDGE('',*,*,#166,.T.); +#226=ORIENTED_EDGE('',*,*,#180,.F.); +#227=ORIENTED_EDGE('',*,*,#181,.F.); +#228=ORIENTED_EDGE('',*,*,#182,.F.); +#229=ORIENTED_EDGE('',*,*,#151,.T.); +#230=ORIENTED_EDGE('',*,*,#155,.T.); +#231=ORIENTED_EDGE('',*,*,#183,.F.); +#232=ORIENTED_EDGE('',*,*,#180,.T.); +#233=ORIENTED_EDGE('',*,*,#165,.T.); +#234=ORIENTED_EDGE('',*,*,#172,.T.); +#235=ORIENTED_EDGE('',*,*,#169,.T.); +#236=ORIENTED_EDGE('',*,*,#179,.T.); +#237=ORIENTED_EDGE('',*,*,#173,.T.); +#238=ORIENTED_EDGE('',*,*,#158,.T.); +#239=ORIENTED_EDGE('',*,*,#162,.T.); +#240=ORIENTED_EDGE('',*,*,#176,.F.); +#241=ORIENTED_EDGE('',*,*,#149,.T.); +#242=ORIENTED_EDGE('',*,*,#177,.F.); +#243=ORIENTED_EDGE('',*,*,#160,.T.); +#244=ORIENTED_EDGE('',*,*,#156,.T.); +#245=ORIENTED_EDGE('',*,*,#175,.F.); +#246=ORIENTED_EDGE('',*,*,#178,.T.); +#247=ORIENTED_EDGE('',*,*,#167,.T.); +#248=ORIENTED_EDGE('',*,*,#171,.T.); +#249=ORIENTED_EDGE('',*,*,#163,.T.); +#250=ORIENTED_EDGE('',*,*,#182,.T.); +#251=ORIENTED_EDGE('',*,*,#184,.T.); +#252=ORIENTED_EDGE('',*,*,#153,.T.); +#253=ORIENTED_EDGE('',*,*,#154,.T.); +#254=ORIENTED_EDGE('',*,*,#184,.F.); +#255=ORIENTED_EDGE('',*,*,#181,.T.); +#256=ORIENTED_EDGE('',*,*,#183,.T.); +#257=PLANE('',#293); +#258=PLANE('',#294); +#259=PLANE('',#295); +#260=PLANE('',#296); +#261=PLANE('',#297); +#262=PLANE('',#298); +#263=PLANE('',#299); +#264=PLANE('',#300); +#265=PLANE('',#301); +#266=PLANE('',#302); +#267=PLANE('',#303); +#268=PLANE('',#304); +#269=PLANE('',#305); +#270=PLANE('',#306); +#271=ADVANCED_FACE('',(#25),#257,.F.); +#272=ADVANCED_FACE('',(#26),#258,.F.); +#273=ADVANCED_FACE('',(#27),#259,.F.); +#274=ADVANCED_FACE('',(#28),#260,.F.); +#275=ADVANCED_FACE('',(#29),#261,.F.); +#276=ADVANCED_FACE('',(#30),#262,.F.); +#277=ADVANCED_FACE('',(#31),#263,.F.); +#278=ADVANCED_FACE('',(#32),#264,.T.); +#279=ADVANCED_FACE('',(#33),#265,.T.); +#280=ADVANCED_FACE('',(#34),#266,.F.); +#281=ADVANCED_FACE('',(#35),#267,.F.); +#282=ADVANCED_FACE('',(#36),#268,.T.); +#283=ADVANCED_FACE('',(#37),#269,.T.); +#284=ADVANCED_FACE('',(#38),#270,.T.); +#285=CLOSED_SHELL('',(#271,#272,#273,#274,#275,#276,#277,#278,#279,#280, +#281,#282,#283,#284)); +#286=DATE_TIME_ROLE('creation_date'); +#287=APPLIED_DATE_AND_TIME_ASSIGNMENT(#288,#286,(#462)); +#288=DATE_AND_TIME(#289,#290); +#289=CALENDAR_DATE(2019,30,6); +#290=LOCAL_TIME(22,0,0.,#291); +#291=COORDINATED_UNIVERSAL_TIME_OFFSET(0,0,.BEHIND.); +#292=AXIS2_PLACEMENT_3D('placement',#373,#307,#308); +#293=AXIS2_PLACEMENT_3D('',#374,#309,#310); +#294=AXIS2_PLACEMENT_3D('',#383,#315,#316); +#295=AXIS2_PLACEMENT_3D('',#389,#320,#321); +#296=AXIS2_PLACEMENT_3D('',#398,#326,#327); +#297=AXIS2_PLACEMENT_3D('',#404,#331,#332); +#298=AXIS2_PLACEMENT_3D('',#413,#337,#338); +#299=AXIS2_PLACEMENT_3D('',#422,#343,#344); +#300=AXIS2_PLACEMENT_3D('',#425,#347,#348); +#301=AXIS2_PLACEMENT_3D('',#431,#352,#353); +#302=AXIS2_PLACEMENT_3D('',#434,#356,#357); +#303=AXIS2_PLACEMENT_3D('',#437,#360,#361); +#304=AXIS2_PLACEMENT_3D('',#443,#365,#366); +#305=AXIS2_PLACEMENT_3D('',#445,#368,#369); +#306=AXIS2_PLACEMENT_3D('',#447,#371,#372); +#307=DIRECTION('axis',(0.,0.,1.)); +#308=DIRECTION('refdir',(1.,0.,0.)); +#309=DIRECTION('center_axis',(-1.79068229778251E-16,1.,0.)); +#310=DIRECTION('ref_axis',(0.,0.,-1.)); +#311=DIRECTION('',(0.,0.,1.)); +#312=DIRECTION('',(-1.,-1.79068229778251E-16,0.)); +#313=DIRECTION('',(0.,0.,-1.)); +#314=DIRECTION('',(1.,1.79068229778251E-16,0.)); +#315=DIRECTION('center_axis',(-8.28356965327843E-32,4.62592926927149E-16, +-1.)); +#316=DIRECTION('ref_axis',(1.77635683940025E-16,-1.,-4.6074255521944E-16)); +#317=DIRECTION('',(-3.96292026025416E-16,1.,4.62592926927149E-16)); +#318=DIRECTION('',(-1.,0.,8.28356965327843E-32)); +#319=DIRECTION('',(1.79068229778251E-16,-1.,-4.62592926927149E-16)); +#320=DIRECTION('center_axis',(0.,0.,-1.)); +#321=DIRECTION('ref_axis',(1.77635683940025E-16,-1.,0.)); +#322=DIRECTION('',(-3.96292026025416E-16,1.,0.)); +#323=DIRECTION('',(-1.,-2.17690789142187E-16,0.)); +#324=DIRECTION('',(1.79068229778251E-16,-1.,0.)); +#325=DIRECTION('',(1.,0.,0.)); +#326=DIRECTION('center_axis',(2.17690789142187E-16,-1.,0.)); +#327=DIRECTION('ref_axis',(0.,0.,1.)); +#328=DIRECTION('',(0.,0.,-1.)); +#329=DIRECTION('',(-1.,-2.17690789142187E-16,0.)); +#330=DIRECTION('',(0.,0.,1.)); +#331=DIRECTION('center_axis',(1.90479440499414E-16,-1.,0.)); +#332=DIRECTION('ref_axis',(0.,0.,1.)); +#333=DIRECTION('',(0.,0.,-1.)); +#334=DIRECTION('',(-1.,-1.90479440499414E-16,0.)); +#335=DIRECTION('',(0.,0.,1.)); +#336=DIRECTION('',(1.,1.90479440499414E-16,0.)); +#337=DIRECTION('center_axis',(-1.90479440499414E-16,1.,5.55111512312578E-14)); +#338=DIRECTION('ref_axis',(0.,5.55111512312578E-14,-1.)); +#339=DIRECTION('',(2.19986265884384E-29,-5.55111512312578E-14,1.)); +#340=DIRECTION('',(-1.,-1.90479440499414E-16,0.)); +#341=DIRECTION('',(-9.94028358393412E-30,5.55111512312578E-14,-1.)); +#342=DIRECTION('',(-1.,-1.90479440499414E-16,0.)); +#343=DIRECTION('center_axis',(3.84776057968231E-32,-2.0200398371572E-16, +1.)); +#344=DIRECTION('ref_axis',(-1.77635683940025E-16,1.,2.02008548777499E-16)); +#345=DIRECTION('',(3.96292026025416E-16,-1.,-2.0200398371572E-16)); +#346=DIRECTION('',(-1.79068229778251E-16,1.,2.0200398371572E-16)); +#347=DIRECTION('center_axis',(0.,1.,0.)); +#348=DIRECTION('ref_axis',(-1.,0.,0.)); +#349=DIRECTION('',(0.,0.,1.)); +#350=DIRECTION('',(-1.,0.,0.)); +#351=DIRECTION('',(0.,0.,1.)); +#352=DIRECTION('center_axis',(0.,0.,1.)); +#353=DIRECTION('ref_axis',(1.,0.,0.)); +#354=DIRECTION('',(-1.79068229778251E-16,1.,0.)); +#355=DIRECTION('',(3.96292026025416E-16,-1.,0.)); +#356=DIRECTION('center_axis',(0.,0.,1.)); +#357=DIRECTION('ref_axis',(1.,0.,0.)); +#358=DIRECTION('',(3.96292026025416E-16,-1.,0.)); +#359=DIRECTION('',(-1.79068229778251E-16,1.,0.)); +#360=DIRECTION('center_axis',(0.,0.,1.)); +#361=DIRECTION('ref_axis',(1.,0.,0.)); +#362=DIRECTION('',(-1.79068229778251E-16,1.,0.)); +#363=DIRECTION('',(1.,0.,0.)); +#364=DIRECTION('',(3.96292026025416E-16,-1.,0.)); +#365=DIRECTION('center_axis',(1.,1.79068229778251E-16,0.)); +#366=DIRECTION('ref_axis',(-1.77635683940025E-16,1.,0.)); +#367=DIRECTION('',(0.,0.,1.)); +#368=DIRECTION('center_axis',(-1.,-3.96292026025416E-16,0.)); +#369=DIRECTION('ref_axis',(3.96292026025416E-16,-1.,0.)); +#370=DIRECTION('',(0.,0.,1.)); +#371=DIRECTION('center_axis',(0.,-1.,0.)); +#372=DIRECTION('ref_axis',(1.,0.,0.)); +#373=CARTESIAN_POINT('',(0.,0.,0.)); +#374=CARTESIAN_POINT('Origin',(0.85,0.3,0.45)); +#375=CARTESIAN_POINT('',(0.,0.3,0.445)); +#376=CARTESIAN_POINT('',(0.,0.3,0.45)); +#377=CARTESIAN_POINT('',(-1.38777878078145E-16,0.3,0.225)); +#378=CARTESIAN_POINT('',(0.85,0.3,0.445)); +#379=CARTESIAN_POINT('',(0.85,0.3,0.445)); +#380=CARTESIAN_POINT('',(0.85,0.3,0.45)); +#381=CARTESIAN_POINT('',(0.85,0.3,0.225)); +#382=CARTESIAN_POINT('',(0.6375,0.3,0.45)); +#383=CARTESIAN_POINT('Origin',(0.85,0.3,0.445)); +#384=CARTESIAN_POINT('',(0.,-1.45983671529924E-16,0.445)); +#385=CARTESIAN_POINT('',(-3.46944695195361E-16,0.925,0.445)); +#386=CARTESIAN_POINT('',(0.85,6.22432378158933E-18,0.445)); +#387=CARTESIAN_POINT('',(0.425,0.,0.445)); +#388=CARTESIAN_POINT('',(0.85,0.15,0.445)); +#389=CARTESIAN_POINT('Origin',(0.85,1.55,0.445)); +#390=CARTESIAN_POINT('',(-4.16333634234434E-16,1.25,0.445)); +#391=CARTESIAN_POINT('',(-5.55111512312578E-16,1.55,0.445)); +#392=CARTESIAN_POINT('',(-6.24500451351651E-16,1.55,0.445)); +#393=CARTESIAN_POINT('',(0.85,1.25,0.445)); +#394=CARTESIAN_POINT('',(0.85,1.25,0.445)); +#395=CARTESIAN_POINT('',(0.85,1.55,0.445)); +#396=CARTESIAN_POINT('',(0.85,0.775,0.445)); +#397=CARTESIAN_POINT('',(0.85,1.55,0.445)); +#398=CARTESIAN_POINT('Origin',(0.85,1.25,0.445)); +#399=CARTESIAN_POINT('',(-4.16333634234434E-16,1.25,0.45)); +#400=CARTESIAN_POINT('',(-4.85722573273506E-16,1.25,0.2225)); +#401=CARTESIAN_POINT('',(0.85,1.25,0.45)); +#402=CARTESIAN_POINT('',(0.6375,1.25,0.45)); +#403=CARTESIAN_POINT('',(0.85,1.25,0.2225)); +#404=CARTESIAN_POINT('Origin',(0.85,0.3,0.)); +#405=CARTESIAN_POINT('',(0.,0.3,0.00500000000000009)); +#406=CARTESIAN_POINT('',(0.,0.3,0.)); +#407=CARTESIAN_POINT('',(-1.38777878078145E-16,0.3,0.)); +#408=CARTESIAN_POINT('',(0.85,0.3,0.00500000000000009)); +#409=CARTESIAN_POINT('',(0.85,0.3,0.00500000000000009)); +#410=CARTESIAN_POINT('',(0.85,0.3,0.)); +#411=CARTESIAN_POINT('',(0.85,0.3,0.)); +#412=CARTESIAN_POINT('',(0.6375,0.3,0.)); +#413=CARTESIAN_POINT('Origin',(0.85,1.25,0.00500000000000028)); +#414=CARTESIAN_POINT('',(-4.16333634234434E-16,1.25,2.81892564846231E-16)); +#415=CARTESIAN_POINT('',(-4.16333634234434E-16,1.25,0.00500000000000028)); +#416=CARTESIAN_POINT('',(-4.85722573273506E-16,1.25,0.00249999999999181)); +#417=CARTESIAN_POINT('',(0.85,1.25,2.81892564846231E-16)); +#418=CARTESIAN_POINT('',(0.6375,1.25,0.)); +#419=CARTESIAN_POINT('',(0.85,1.25,0.00500000000000028)); +#420=CARTESIAN_POINT('',(0.85,1.25,0.00250000000003484)); +#421=CARTESIAN_POINT('',(0.85,1.25,0.00500000000000028)); +#422=CARTESIAN_POINT('Origin',(0.85,0.3,0.00500000000000009)); +#423=CARTESIAN_POINT('',(-3.46944695195361E-16,0.925,0.00500000000000022)); +#424=CARTESIAN_POINT('',(0.85,0.15,0.00500000000000006)); +#425=CARTESIAN_POINT('Origin',(0.85,1.55,0.)); +#426=CARTESIAN_POINT('',(0.85,1.55,0.)); +#427=CARTESIAN_POINT('',(0.85,1.55,0.)); +#428=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.)); +#429=CARTESIAN_POINT('',(0.85,1.55,0.)); +#430=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.)); +#431=CARTESIAN_POINT('Origin',(0.425,0.775,0.45)); +#432=CARTESIAN_POINT('',(0.85,0.,0.45)); +#433=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.45)); +#434=CARTESIAN_POINT('Origin',(0.425,0.775,0.)); +#435=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.)); +#436=CARTESIAN_POINT('',(0.85,0.,0.)); +#437=CARTESIAN_POINT('Origin',(0.425,0.775,0.)); +#438=CARTESIAN_POINT('',(0.85,0.,0.)); +#439=CARTESIAN_POINT('',(0.85,0.,0.)); +#440=CARTESIAN_POINT('',(0.,0.,0.)); +#441=CARTESIAN_POINT('',(0.,0.,0.)); +#442=CARTESIAN_POINT('',(-6.14252640339395E-16,1.55,0.)); +#443=CARTESIAN_POINT('Origin',(0.85,0.,0.)); +#444=CARTESIAN_POINT('',(0.85,0.,0.)); +#445=CARTESIAN_POINT('Origin',(-6.14252640339395E-16,1.55,0.)); +#446=CARTESIAN_POINT('',(0.,0.,0.)); +#447=CARTESIAN_POINT('Origin',(0.,0.,0.)); +#448=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#452, +'DISTANCE_ACCURACY_VALUE', +'Maximum model space distance between geometric entities at asserted c +onnectivities'); +#449=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-6),#452, +'DISTANCE_ACCURACY_VALUE', +'Maximum model space distance between geometric entities at asserted c +onnectivities'); +#450=( +GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#448)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#452,#455,#453)) +REPRESENTATION_CONTEXT('','3D') +); +#451=( +GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#449)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#452,#455,#453)) +REPRESENTATION_CONTEXT('','3D') +); +#452=( +LENGTH_UNIT() +NAMED_UNIT(*) +SI_UNIT(.MILLI.,.METRE.) +); +#453=( +NAMED_UNIT(*) +SI_UNIT($,.STERADIAN.) +SOLID_ANGLE_UNIT() +); +#454=DIMENSIONAL_EXPONENTS(0.,0.,0.,0.,0.,0.,0.); +#455=( +CONVERSION_BASED_UNIT('degree',#457) +NAMED_UNIT(#454) +PLANE_ANGLE_UNIT() +); +#456=( +NAMED_UNIT(*) +PLANE_ANGLE_UNIT() +SI_UNIT($,.RADIAN.) +); +#457=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.01745329252),#456); +#458=SHAPE_DEFINITION_REPRESENTATION(#459,#460); +#459=PRODUCT_DEFINITION_SHAPE('',$,#462); +#460=SHAPE_REPRESENTATION('',(#292),#450); +#461=PRODUCT_DEFINITION_CONTEXT('part definition',#466,'design'); +#462=PRODUCT_DEFINITION('0603','0603',#463,#461); +#463=PRODUCT_DEFINITION_FORMATION('',$,#468); +#464=PRODUCT_RELATED_PRODUCT_CATEGORY('0603','0603',(#468)); +#465=APPLICATION_PROTOCOL_DEFINITION('international standard', +'automotive_design',2009,#466); +#466=APPLICATION_CONTEXT( +'Core Data for Automotive Mechanical Design Process'); +#467=PRODUCT_CONTEXT('part definition',#466,'mechanical'); +#468=PRODUCT('0603','0603',$,(#467)); +#469=PRESENTATION_STYLE_ASSIGNMENT((#473)); +#470=PRESENTATION_STYLE_ASSIGNMENT((#474)); +#471=PRESENTATION_STYLE_ASSIGNMENT((#475)); +#472=PRESENTATION_STYLE_ASSIGNMENT((#476)); +#473=SURFACE_STYLE_USAGE(.BOTH.,#477); +#474=SURFACE_STYLE_USAGE(.BOTH.,#478); +#475=SURFACE_STYLE_USAGE(.BOTH.,#479); +#476=SURFACE_STYLE_USAGE(.BOTH.,#480); +#477=SURFACE_SIDE_STYLE('',(#481)); +#478=SURFACE_SIDE_STYLE('',(#482)); +#479=SURFACE_SIDE_STYLE('',(#483)); +#480=SURFACE_SIDE_STYLE('',(#484)); +#481=SURFACE_STYLE_FILL_AREA(#485); +#482=SURFACE_STYLE_FILL_AREA(#486); +#483=SURFACE_STYLE_FILL_AREA(#487); +#484=SURFACE_STYLE_FILL_AREA(#488); +#485=FILL_AREA_STYLE('',(#489)); +#486=FILL_AREA_STYLE('',(#490)); +#487=FILL_AREA_STYLE('',(#491)); +#488=FILL_AREA_STYLE('',(#492)); +#489=FILL_AREA_STYLE_COLOUR('',#493); +#490=FILL_AREA_STYLE_COLOUR('',#494); +#491=FILL_AREA_STYLE_COLOUR('',#495); +#492=FILL_AREA_STYLE_COLOUR('',#496); +#493=COLOUR_RGB('',0.749019607843137,0.749019607843137,0.749019607843137); +#494=COLOUR_RGB('',0.831372549019608,0.831372549019608,0.831372549019608); +#495=COLOUR_RGB('',0.988235294117647,1.,1.); +#496=COLOUR_RGB('',0.0784313725490196,0.43921568627451,0.); +ENDSEC; +END-ISO-10303-21;
exports/altium/TNPW060317K8BEEA.PcbLibadded⋯ 1 unchanged line ⋯
exports/altium/TNPW060317K8BEEA.SchLibadded⋯ 1 unchanged line ⋯
page.json+31−24@@ -1,39 +1,46 @@ { "schema_version": 1, "slug": "tnpw060317k8beea",- "type": "component",+ "type": "hardware",+ "kind": "component", "title": "TNPW060317K8BEEA", "brief": "Vishay 17.8k ohm 0.1% 25 ppm/K 0603 resistor; manufacturer STEP and design libraries, validation in progress.", "version": "0.1.0", "visibility": "private",- "kind": "component", "component": { "mpn": "TNPW060317K8BEEA",- "manufacturer": "",- "package": "",- "pin_count": null,- "category": "",- "subcategory": "",- "body_size": null,- "parts": {},- "distributor_links": {}+ "manufacturer": "Vishay",+ "package": "0603",+ "pin_count": 2,+ "category": "resistor",+ "parts": {+ "symbol": "canonical-export/TNPW060317K8BEEA.kicad_sym",+ "footprint": "canonical-export/TNPW060317K8BEEA.kicad_mod",+ "step": "TNPW_e3_0603.stp",+ "glb": "TNPW_e3_0603.glb",+ "model_3d": "TNPW_e3_0603.glb",+ "adom_lbr": "TNPW060317K8BEEA.adom-lbr.json",+ "datasheet": "tnpw-e3-datasheet.pdf"+ },+ "distributor_links": {+ "mouser": "71-TNPW060317K8BEEA"+ }+ },+ "source": {+ "tool": "adom-lbr",+ "url": "https://www.vishay.com/docs/28758/tnpw_e3.pdf" }, "hero": { "type": "billboard", "headline": "TNPW060317K8BEEA", "subhead": "17.8k ohm precision resistor; manufacturer source assets" },- "author": {- "name": "John Lauer",- "email": "[email protected]"- },- "tags": [],- "license": "proprietary",- "sample_prompts": [],- "discovery_triggers": [],- "discovery_pitch": null,- "metadata": {},- "created_at": "2026-09-09T20:53:46.352Z",- "updated_at": "2026-09-09T20:53:46.352Z",- "org": "adom"-}+ "eda_assets": {+ "kicad": {+ "symbol": "canonical-export/TNPW060317K8BEEA.kicad_sym",+ "footprint": "canonical-export/TNPW060317K8BEEA.kicad_mod",+ "model": "TNPW_e3_0603.stp",+ "provenance": "generated"+ }+ }+}
provenance.jsonadded+112@@ -0,0 +1,112 @@+{+ "mpn": "TNPW060317K8BEEA",+ "value": "17.8k",+ "tolerance_percent": 0.1,+ "tcr_ppm_per_K": 25,+ "datasheet": {+ "url": "https://www.vishay.com/docs/28758/tnpw_e3.pdf",+ "revision": "10-Apr-2026",+ "orderingPage": 4,+ "dimensionsPage": 15+ },+ "step": {+ "source": "https://www.vishay.com/docs/28967/tnpw_e3_3dmodels.zip",+ "member": "TNPW_V_e3/TNPW_e3_0603.stp",+ "authorship": "Manufacturer-hosted original linked from current manufacturer datasheet",+ "seating": "Candidate rigid pose from OCCT bounds: rotate Z -90 degrees then translate (-0.775,+0.425,0) mm; body becomes centered, long axis X, floor Z=0. Native pad/contact read-back pending"+ },+ "landPattern": {+ "source": "https://www.vishay.com/docs/28950/recsoldpaddims-drabeyresfus.pdf",+ "revision": "12-Jul-2022",+ "choice": "IPC-7351 reflow recommendation",+ "padSize_mm": [+ 0.9,+ 1.0+ ],+ "centres_mm": [+ [+ -0.8,+ 0+ ],+ [+ 0.8,+ 0+ ]+ ],+ "innerGap_mm": 0.7,+ "outerSpan_mm": 2.5+ },+ "symbol": {+ "source": "KiCad Device:R_US via service-kicad",+ "license": "KiCad library CC-BY-SA 4.0 with exception; retain upstream attribution",+ "changes": "Exact MPN, value, footprint and manufacturer datasheet fields"+ },+ "stage": "Design candidate with component wiki sources and generated KiCad/Fusion/Altium libraries; native seating and board qualification pending",+ "files": [+ {+ "file": "TNPW060317K8BEEA-footprint-input.json",+ "sha256": "11b7a81b0a28a74bf28db42d56c2da9d7246d433aa9a28871e91769024ddb967",+ "bytes": 591+ },+ {+ "file": "TNPW060317K8BEEA.adom-lbr.json",+ "sha256": "d1d7e673cf28f99cf13e1c10917557ca8af13b7f8ab99536132960ca73102b5a",+ "bytes": 5211+ },+ {+ "file": "TNPW060317K8BEEA.kicad_mod",+ "sha256": "dbcbc7232a7571fcf2ed2d36d481662b72811dc036ba505ddc2c438f7f331ce5",+ "bytes": 1182+ },+ {+ "file": "TNPW060317K8BEEA.kicad_sym",+ "sha256": "076896e820937810b62ba578c81480b454120f7438f5cad898ed0de12b6a2a57",+ "bytes": 2978+ },+ {+ "file": "TNPW060317K8BEEA.lbr",+ "sha256": "acc204361ee1bbcc80420b3eab6063100a5478c0c7a92b2768a1b9db64301c79",+ "bytes": 7170+ },+ {+ "file": "TNPW_e3_0603.glb",+ "sha256": "b1182e546da9145f71cb4c393ebcd3d72f10bd2ee21c654029698f32cea7c6ed",+ "bytes": 7532+ },+ {+ "file": "TNPW_e3_0603.stp",+ "sha256": "8fe9ba5706ffaa001ec280abe05a6f532c0c2bbee5e7eb23445b1c58f845973a",+ "bytes": 21221+ },+ {+ "file": "export-altium-result.txt",+ "sha256": "f74df19ab57dddbd44f9457f7cee69c5ad71e389a0b49d33ec0b354ebee0ca7c",+ "bytes": 270+ },+ {+ "file": "export-kicad-result.txt",+ "sha256": "0d7eaacce65587aa37db58ea32b72618851d80571d3952d5fe44495d3048a1cd",+ "bytes": 292+ },+ {+ "file": "footprint-create-result.txt",+ "sha256": "c4ea74c854409cea74bc623e048cd2ca661aa2e06a1e46392f673d0533453015",+ "bytes": 404+ },+ {+ "file": "fusion-export-result.txt",+ "sha256": "6e20bcc19c599e4194630e6c6d1c59eb1d19c569a477a338537894312d034447",+ "bytes": 505+ },+ {+ "file": "recommended-lands.pdf",+ "sha256": "9e2b145c937da3be1e926b8afc2856959754eeb4d1103241d838038f7308144e",+ "bytes": 83913+ },+ {+ "file": "tnpw-e3-datasheet.pdf",+ "sha256": "4655e998be78cfc13a74dbd04749f675a1e380dc0918cb38a33cde5a6de59b39",+ "bytes": 363615+ }+ ]+}
recommended-lands.pdfadded⋯ 1 unchanged line ⋯
tnpw-e3-datasheet.pdfadded⋯ 1 unchanged line ⋯