component
TMUX6211PWR
Public Made by Adomby adom
Texas Instruments Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+52@@ -0,0 +1,52 @@+# TMUX6211PWR++**Texas Instruments** · Analog Switches, Multiplexers · TSSOP-16++TMUX6211PWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SEL1 | input | Logic control input 1 has an internal 4 MΩ pull-down resistor and controls the channel 1 state as shown in Section 8.5. |+| 2 | D1 | bidirectional | Drain pin 1 can be an input or output. |+| 3 | S1 | bidirectional | Source pin 1 can be an input or output. |+| 4 | VSS | power_in | Negative power supply, the most negative power-supply potential; in single-supply applications it can be connected to ground, with a 0.1 µF to 10 µF decoupling capacitor between VSS and GND. |+| 5 | GND | power_in | Ground (0 V) reference. |+| 6 | S4 | bidirectional | Source pin 4 can be an input or output. |+| 7 | D4 | bidirectional | Drain pin 4 can be an input or output. |+| 8 | SEL4 | input | Logic control input 4 has an internal 4 MΩ pull-down resistor and controls the channel 4 state as shown in Section 8.5. |+| 9 | SEL3 | input | Logic control input 3 has an internal 4 MΩ pull-down resistor and controls the channel 3 state as shown in Section 8.5. |+| 10 | D3 | bidirectional | Drain pin 3 can be an input or output. |+| 11 | S3 | bidirectional | Source pin 3 can be an input or output. |+| 12 | N.C. | unconnected | No internal connection; can be shorted to GND or left floating. |+| 13 | VDD | power_in | Positive power supply, the most positive power-supply potential; connect a 0.1 µF to 10 µF decoupling capacitor between VDD and GND. |+| 14 | S2 | bidirectional | Source pin 2 can be an input or output. |+| 15 | D2 | bidirectional | Drain pin 2 can be an input or output. |+| 16 | SEL2 | input | Logic control input 2 has an internal 4 MΩ pull-down resistor and controls the channel 2 state as shown in Section 8.5. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Interface |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TMUX6211PWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `tmux6211pwr-etched.step` / `tmux6211pwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tmux6211pwr.step` / `tmux6211pwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/tmux6211.pdf) (45 pp, sha256 `411a9cc9b155bbe9`, retrieved 2026-10-07, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tmux6211pwr-datasheet.pdf)
page.jsonadded+247@@ -0,0 +1,247 @@+{+ "slug": "tmux6211pwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Analog Switches, Multiplexers, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "tmux6211pwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tmux6211pwr.kicad_sym",+ "tmux6211pwr.kicad_mod",+ "tmux6211pwr.glb",+ "tmux6211pwr.step",+ "tmux6211pwr.lbr",+ "docs/hero.png",+ "docs/tmux6211pwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tmux6211pwr-hero.glb",+ "tmux6211pwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TMUX6211PWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-16",+ "pin_count": 16,+ "category": "Interface",+ "subcategory": "Analog Switches, Multiplexers",+ "datasheet": "https://www.ti.com/lit/ds/symlink/tmux6211.pdf",+ "parts": {+ "symbol": "tmux6211pwr.kicad_sym",+ "footprint": "tmux6211pwr.kicad_mod",+ "model_3d": "tmux6211pwr-hero.glb",+ "model_3d_plain": "tmux6211pwr.glb",+ "model_3d_step": "tmux6211pwr-etched.step",+ "model_3d_step_plain": "tmux6211pwr.step",+ "lbr": "tmux6211pwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C3657060",+ "digikey": "296-TMUX6211PWRTR-ND",+ "mouser": "595-TMUX6211PWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-07T21:33:40Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TMUX6211PWRTR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TMUX6211PWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SEL1",+ "type": "input",+ "description": "Logic control input 1 has an internal 4 MΩ pull-down resistor and controls the channel 1 state as shown in Section 8.5."+ },+ {+ "number": "2",+ "name": "D1",+ "type": "bidirectional",+ "description": "Drain pin 1 can be an input or output."+ },+ {+ "number": "3",+ "name": "S1",+ "type": "bidirectional",+ "description": "Source pin 1 can be an input or output."+ },+ {+ "number": "4",+ "name": "VSS",+ "type": "power_in",+ "description": "Negative power supply, the most negative power-supply potential; in single-supply applications it can be connected to ground, with a 0.1 µF to 10 µF decoupling capacitor between VSS and GND."+ },+ {+ "number": "5",+ "name": "GND",+ "type": "power_in",+ "description": "Ground (0 V) reference."+ },+ {+ "number": "6",+ "name": "S4",+ "type": "bidirectional",+ "description": "Source pin 4 can be an input or output."+ },+ {+ "number": "7",+ "name": "D4",+ "type": "bidirectional",+ "description": "Drain pin 4 can be an input or output."+ },+ {+ "number": "8",+ "name": "SEL4",+ "type": "input",+ "description": "Logic control input 4 has an internal 4 MΩ pull-down resistor and controls the channel 4 state as shown in Section 8.5."+ },+ {+ "number": "9",+ "name": "SEL3",+ "type": "input",+ "description": "Logic control input 3 has an internal 4 MΩ pull-down resistor and controls the channel 3 state as shown in Section 8.5."+ },+ {+ "number": "10",+ "name": "D3",+ "type": "bidirectional",+ "description": "Drain pin 3 can be an input or output."+ },+ {+ "number": "11",+ "name": "S3",+ "type": "bidirectional",+ "description": "Source pin 3 can be an input or output."+ },+ {+ "number": "12",+ "name": "N.C.",+ "type": "unconnected",+ "description": "No internal connection; can be shorted to GND or left floating."+ },+ {+ "number": "13",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive power supply, the most positive power-supply potential; connect a 0.1 µF to 10 µF decoupling capacitor between VDD and GND."+ },+ {+ "number": "14",+ "name": "S2",+ "type": "bidirectional",+ "description": "Source pin 2 can be an input or output."+ },+ {+ "number": "15",+ "name": "D2",+ "type": "bidirectional",+ "description": "Drain pin 2 can be an input or output."+ },+ {+ "number": "16",+ "name": "SEL2",+ "type": "input",+ "description": "Logic control input 2 has an internal 4 MΩ pull-down resistor and controls the channel 2 state as shown in Section 8.5."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The Table 5-1 extract lists the S3 row twice (TSSOP pin 11, WQFN pin 9). Both entries agree, so it w; Table 5-1 lists a 'Thermal Pad' row shared by the PW and RUM packages. The TSSOP pin list has no num; The pin mapping comes from the Table 5-1 text extract. The Figure 5-1 top-view drawing was not in th"+ ],+ "pages_sent": 8,+ "cost_usd": 0.0639,+ "at": "2026-10-07T21:33:21"+ },+ "datasheet": {+ "url": "https://www.ti.com/lit/ds/symlink/tmux6211.pdf",+ "pages": 45,+ "sha256": "411a9cc9b155bbe9",+ "source_tier": "mfr"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 16,+ "described": 16,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tmux6211pwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tmux6211pwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.4,+ 5,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f70b79e11220ccf1fd67d26cc40d9ff809819b22c7967b58a77c6d59929186cc",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}