component
TMP175AIDR
Public Made by Adomby adom
UMW Temperature and Humidity Sensor, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+10−7@@ -32,19 +32,19 @@ "number": "1", "name": "SDA", "type": "bidirectional",- "description": "Serial data line for I\u00b2C/SMBus interface. Open-drain output; requires an external pull-up resistor to V+."+ "description": "Serial data line for I²C/SMBus interface. Open-drain output; requires an external pull-up resistor to V+." }, { "number": "2", "name": "SCL", "type": "input",- "description": "Serial clock line for I\u00b2C/SMBus interface. Open-drain; requires an external pull-up resistor to V+. Fast mode up to 400 kHz, High-speed mode up to 2.75 MHz."+ "description": "Serial clock line for I²C/SMBus interface. Open-drain; requires an external pull-up resistor to V+. Fast mode up to 400 kHz, High-speed mode up to 2.75 MHz." }, { "number": "3", "name": "ALERT", "type": "output",- "description": "Over-temperature alert output (SMBus Alert). Open-drain; requires an external pull-up resistor. Max voltage ((V+)+0.3) and \u22645.5V."+ "description": "Over-temperature alert output (SMBus Alert). Open-drain; requires an external pull-up resistor. Max voltage ((V+)+0.3) and ≤5.5V." }, { "number": "4",@@ -56,19 +56,19 @@ "number": "5", "name": "A2", "type": "input",- "description": "I\u00b2C address select bit 2. Connect to GND, V+, or leave floating (floating available on TMP175 only) to program the device address."+ "description": "I²C address select bit 2. Connect to GND, V+, or leave floating (floating available on TMP175 only) to program the device address." }, { "number": "6", "name": "A1", "type": "input",- "description": "I\u00b2C address select bit 1. Connect to GND, V+, or leave floating (floating available on TMP175 only) to program the device address."+ "description": "I²C address select bit 1. Connect to GND, V+, or leave floating (floating available on TMP175 only) to program the device address." }, { "number": "7", "name": "A0", "type": "input",- "description": "I\u00b2C address select bit 0. Connect to GND, V+, or leave floating (floating available on TMP175 only) to program the device address."+ "description": "I²C address select bit 0. Connect to GND, V+, or leave floating (floating available on TMP175 only) to program the device address." }, { "number": "8",@@ -138,5 +138,8 @@ "docs/tmp175aidr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }