component
TMP112BIDRLR
Public Made by Adomby adom
UMW Temperature and Humidity Sensor, SOT-563. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,7 +32,7 @@ "number": "1", "name": "SCL", "type": "input",- "description": "Serial clock input for the SMBus/I\u00b2C interface. Open-drain, requires an external pull-up resistor. Supports fast mode up to 400 kHz and high-speed mode up to 2.75 MHz."+ "description": "Serial clock input for the SMBus/I²C interface. Open-drain, requires an external pull-up resistor. Supports fast mode up to 400 kHz and high-speed mode up to 2.75 MHz." }, { "number": "2",@@ -44,25 +44,25 @@ "number": "3", "name": "ALERT", "type": "output",- "description": "Over-temperature alert output. Open-drain, requires an external pull-up resistor. Voltage limited to (V+)+0.3V and \u22645.5V absolute maximum."+ "description": "Over-temperature alert output. Open-drain, requires an external pull-up resistor. Voltage limited to (V+)+0.3V and ≤5.5V absolute maximum." }, { "number": "4", "name": "ADD0", "type": "input",- "description": "Address select input. Tie to V+, GND, SCL, or SDA to select one of four possible I\u00b2C slave addresses, allowing up to four devices on one bus."+ "description": "Address select input. Tie to V+, GND, SCL, or SDA to select one of four possible I²C slave addresses, allowing up to four devices on one bus." }, { "number": "5", "name": "V+", "type": "power_in",- "description": "Positive supply voltage input, 1.4V to 5.5V (3.3V nominal). Absolute maximum 6V. Bypass with a 0.1\u00b5F ceramic capacitor to GND close to the device."+ "description": "Positive supply voltage input, 1.4V to 5.5V (3.3V nominal). Absolute maximum 6V. Bypass with a 0.1µF ceramic capacitor to GND close to the device." }, { "number": "6", "name": "SDA", "type": "bidirectional",- "description": "Serial data line for the SMBus/I\u00b2C interface. Open-drain, requires an external pull-up resistor. Used for both data input and output."+ "description": "Serial data line for the SMBus/I²C interface. Open-drain, requires an external pull-up resistor. Used for both data input and output." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/tmp112bidrlr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }