component
TMCS1123A2AQDVGR
Public Made by Adomby adom
Texas Instruments Current Sensors, SOIC-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+10364
README.md+77docs/hero.pngdocs/tmcs1123a2aqdvgr-datasheet.pdfpackage.json+207page.json+213tmcs1123a2aqdvgr-etched.glbtmcs1123a2aqdvgr-hero.glbtmcs1123a2aqdvgr-hero.overlay.json+304tmcs1123a2aqdvgr.glbtmcs1123a2aqdvgr.kicad_mod+276tmcs1123a2aqdvgr.kicad_sym+53tmcs1123a2aqdvgr.lbr+132tmcs1123a2aqdvgr.step+9100viewers/footprint.html+1viewers/symbol.html+1README.mdadded+77@@ -0,0 +1,77 @@+# TMCS1123A2AQDVGR++**Texas Instruments** · Current Sensors · SOIC-10++TMCS1123A2AQDVGR from Texas Instruments, in a SOIC-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | IN+ | input | Positive input current pin; the measured current flows into and out of IN+ and IN- through the isolated high-voltage-side lead frame. |+| 2 | IN- | input | Negative input current pin; the measured current flows into and out of IN+ and IN- through the isolated high-voltage-side lead frame. |+| 3 | GND | power_in | Analog ground for the low-voltage isolated side. |+| 4 | ALERT | output | Sensor diagnostic PWM output, open-drain and active low at 8 kHz, with duty cycle indicating thermal and/or sensor alert state; connect to GND when not used. |+| 5 | VREF | power_in | Zero-current output voltage reference, brought out so that reference error can be removed at system level; leave floating when not used. |+| 6 | VOUT | output | Analog output voltage proportional to input current; the linear output is limited to VS - 100 mV at the top and 100 mV above GND at the bottom. |+| 7 | OC | output | Overcurrent output, open-drain and active low; connect to GND when not used. |+| 8 | VS | power_in | Low-voltage supply, operating from 3 V to 5.5 V and typically decoupled with a 0.1 µF low-ESR capacitor placed close to the VS and GND pins. |+| 9 | VOC | input | Overcurrent threshold input that sets the overcurrent level through VOC = S x IOC / 2.5, with 120 kΩ input impedance; connect to VS when not used. |+| 10 | NC | unconnected | Reserved pin that may be connected to GND or left floating. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-10 |+| Category | Magnetic Sensors |+| Pins | 10 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| 最大连续输入电流 | IIN,MAX | | | 80 | ARMS | TA = 25°C | 8 |+| 最大连续输入电流 | IIN,MAX | | | 44 | ARMS | TA = 125°C | 8 |+| 灵敏度误差 | eS | -0.4 | 0.1 | 0.4 | % | 0.05V ≤ VOUT ≤ VS − 0.2V | 8 |+| 灵敏度热漂移 | Sdrift, therm | -50 | 20 | 50 | ppm/°C | 0.05V ≤ VOUT ≤ VS − 0.2V，TA = −40°C 至 125°C | 8 |+| 灵敏度寿命漂移 | Sdrift, life | -0.5 | 0.2 | 0.5 | % | 0.05V ≤ VOUT ≤ VS − 0.2V | 8 |+| 非线性误差 | eNL | -0.1 | | 0.1 | % | VOUT = 0.1V 至 VS - 0.1V | 8 |+| 输出电压失调误差 (TMCS1123x2A) | VOE | -1.5 | 0.3 | 1.5 | mV | VOUT,0A − VREF，IIN = 0A | 8 |+| 输出电压失调热漂移 (TMCS1123x2A) | VOE, drift, therm | -15 | 5 | 15 | µV/°C | VOUT,0A − VREF，IIN = 0A，TA = −40°C 至 125°C | 8 |+| 偏移寿命漂移 | IOS, drift, life | -16 | 8 | 16 | mA | 以输入为基准，(VOUT,0A − VREF) / S，IIN = 0A | 8 |+| 电源抑制比 | PSRR | -45 | 10 | 45 | mA/V | 以输入为基准，VS = 3V 至 5.5V，TA= -40ºC 至 125ºC | 8 |+| 最大容性负载 | CL,MAX | | | 4.7 | nF | VOUT 至 GND | 8 |+| 摆幅 GND 到 GND 的摆幅 | | | 5 | 10 | mV | | 9 |+| 基准输出电压误差 (TMCS1123AxA) | | -0.15 | 0.02 | 0.15 | % | | 9 |+| 基准输出电压热漂移 | | | 8 | 20 | ppm/°C | TA = -40°C 至 125°C | 9 |+| 基准输出电压 PSRR | | | 80 | 150 | µV/V | VS = 3V 至 5.5V | 9 |+| 最大基准输出容性负载 | | | | 20 | nF | | 9 |+| 过流阈值误差 | | -10 | 2 | 10 | % | TA = -40°C 至 125°C | 9 |+| 过流检测响应时间 (TMCS1123xxA) | | | 100 | 250 | ns | TMCS1123xxA，IIN 步进 = 120% 的 IOC | 9 |+| OC 引脚下拉电压 | OC, OL | | 0.07 | 0.2 | V | IOL = 3mA，TA = -40°C 至 125°C | 9 |+| ALERT 引脚下拉电压 | | | 0.07 | 0.2 | V | IOL = 3mA，TA = -40°C 至 125°C | 9 |+| VS 电源电压 | VS | 3 | | 5.5 | V | TA = -40ºC 至 +125ºC | 9 |+| IQ 静态电流 | IQ | | 11 | 14 | mA | TA = 25ºC | 10 |+| IQ 静态电流 | IQ | | | 14.5 | mA | TA = -40°C 至 +125°C，VS = 5.5V | 10 |++## CAD (KiCad official)++- Symbol: `TMCS1123A2AQDVGR`+- Footprint: `Package_SO:SOIC-10_3.9x4.9mm_P1mm`+- 3D model: SOIC-10, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.75 mm nominal SOIC height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)+- 3D model files: `tmcs1123a2aqdvgr-etched.step` / `tmcs1123a2aqdvgr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tmcs1123a2aqdvgr.step` / `tmcs1123a2aqdvgr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com.cn/cn/lit/ds/symlink/tmcs1123.pdf?ts=1734489631374&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D9%2526searchTerm%253DTMCS1123A2AQDVGR) (48 pp, sha256 `79c34d3aec782be0`, retrieved 2026-10-20, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tmcs1123a2aqdvgr-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/tmcs1123a2aqdvgr-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+207@@ -0,0 +1,207 @@+{+ "slug": "tmcs1123a2aqdvgr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Current Sensors, SOIC-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "magnetic sensors",+ "tmcs1123a2aqdvgr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tmcs1123a2aqdvgr.kicad_sym",+ "tmcs1123a2aqdvgr.kicad_mod",+ "tmcs1123a2aqdvgr.glb",+ "tmcs1123a2aqdvgr.step",+ "tmcs1123a2aqdvgr.lbr",+ "docs/hero.png",+ "docs/tmcs1123a2aqdvgr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tmcs1123a2aqdvgr-hero.glb",+ "tmcs1123a2aqdvgr-hero.overlay.json",+ "tmcs1123a2aqdvgr-etched.glb"+ ],+ "component": {+ "mpn": "TMCS1123A2AQDVGR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-10",+ "pin_count": 10,+ "category": "Magnetic Sensors",+ "subcategory": "Current Sensors",+ "datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/tmcs1123.pdf?ts=1734489631374&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D9%2526searchTerm%253DTMCS1123A2AQDVGR",+ "parts": {+ "symbol": "tmcs1123a2aqdvgr.kicad_sym",+ "footprint": "tmcs1123a2aqdvgr.kicad_mod",+ "model_3d": "tmcs1123a2aqdvgr-hero.glb",+ "model_3d_plain": "tmcs1123a2aqdvgr-etched.glb",+ "model_3d_step": "tmcs1123a2aqdvgr-etched.step",+ "model_3d_step_plain": "tmcs1123a2aqdvgr.step",+ "lbr": "tmcs1123a2aqdvgr.lbr"+ },+ "distributor_links": {+ "lcsc": "C22445466",+ "digikey": "296-TMCS1123A2AQDVGRTR-ND",+ "mouser": "595-TMCS1123A2AQDVGR"+ },+ "distributor_check": {+ "checked_at": "2026-10-20T22:37:33Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TMCS1123A2AQDVGRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TMCS1123A2AQDVGR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN+",+ "type": "input",+ "description": "Positive input current pin; the measured current flows into and out of IN+ and IN- through the isolated high-voltage-side lead frame."+ },+ {+ "number": "2",+ "name": "IN-",+ "type": "input",+ "description": "Negative input current pin; the measured current flows into and out of IN+ and IN- through the isolated high-voltage-side lead frame."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground for the low-voltage isolated side."+ },+ {+ "number": "4",+ "name": "ALERT",+ "type": "output",+ "description": "Sensor diagnostic PWM output, open-drain and active low at 8 kHz, with duty cycle indicating thermal and/or sensor alert state; connect to GND when not used."+ },+ {+ "number": "5",+ "name": "VREF",+ "type": "power_in",+ "description": "Zero-current output voltage reference, brought out so that reference error can be removed at system level; leave floating when not used."+ },+ {+ "number": "6",+ "name": "VOUT",+ "type": "output",+ "description": "Analog output voltage proportional to input current; the linear output is limited to VS - 100 mV at the top and 100 mV above GND at the bottom."+ },+ {+ "number": "7",+ "name": "OC",+ "type": "output",+ "description": "Overcurrent output, open-drain and active low; connect to GND when not used."+ },+ {+ "number": "8",+ "name": "VS",+ "type": "power_in",+ "description": "Low-voltage supply, operating from 3 V to 5.5 V and typically decoupled with a 0.1 µF low-ESR capacitor placed close to the VS and GND pins."+ },+ {+ "number": "9",+ "name": "VOC",+ "type": "input",+ "description": "Overcurrent threshold input that sets the overcurrent level through VOC = S x IOC / 2.5, with 120 kΩ input impedance; connect to VS when not used."+ },+ {+ "number": "10",+ "name": "NC",+ "type": "unconnected",+ "description": "Reserved pin that may be connected to GND or left floating."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: ALERT and OC are open-drain, active-low outputs; the KiCad output class is used because the schema h; Analog pins are mapped to KiCad input/output classes as no analog class exists in the schema; the da"+ ],+ "pages_sent": 31,+ "cost_usd": 0.1462,+ "at": "2026-10-20T22:27:55"+ },+ "datasheet": {+ "url": "https://www.ti.com.cn/cn/lit/ds/symlink/tmcs1123.pdf?ts=1734489631374&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D9%2526searchTerm%253DTMCS1123A2AQDVGR",+ "pages": 48,+ "sha256": "79c34d3aec782be0",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tmcs1123a2aqdvgr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.06,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "470223f3f6d456894dea19a2b8c36e903b25b437d6874e27373f57f28ca2d473",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tmcs1123a2aqdvgr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.06,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a3408200c58e48eddaf355bf06ff8d4494f29a532a755f549a0a52e34f711b67",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+213@@ -0,0 +1,213 @@+{+ "slug": "tmcs1123a2aqdvgr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Current Sensors, SOIC-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "magnetic sensors",+ "tmcs1123a2aqdvgr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tmcs1123a2aqdvgr.kicad_sym",+ "tmcs1123a2aqdvgr.kicad_mod",+ "tmcs1123a2aqdvgr.glb",+ "tmcs1123a2aqdvgr.step",+ "tmcs1123a2aqdvgr.lbr",+ "docs/hero.png",+ "docs/tmcs1123a2aqdvgr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tmcs1123a2aqdvgr-hero.glb",+ "tmcs1123a2aqdvgr-hero.overlay.json",+ "tmcs1123a2aqdvgr-etched.glb"+ ],+ "component": {+ "mpn": "TMCS1123A2AQDVGR",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-10",+ "pin_count": 10,+ "category": "Magnetic Sensors",+ "subcategory": "Current Sensors",+ "datasheet": "https://www.ti.com.cn/cn/lit/ds/symlink/tmcs1123.pdf?ts=1734489631374&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D9%2526searchTerm%253DTMCS1123A2AQDVGR",+ "parts": {+ "symbol": "tmcs1123a2aqdvgr.kicad_sym",+ "footprint": "tmcs1123a2aqdvgr.kicad_mod",+ "model_3d": "tmcs1123a2aqdvgr-hero.glb",+ "model_3d_plain": "tmcs1123a2aqdvgr-etched.glb",+ "model_3d_step": "tmcs1123a2aqdvgr-etched.step",+ "model_3d_step_plain": "tmcs1123a2aqdvgr.step",+ "lbr": "tmcs1123a2aqdvgr.lbr"+ },+ "distributor_links": {+ "lcsc": "C22445466",+ "digikey": "296-TMCS1123A2AQDVGRTR-ND",+ "mouser": "595-TMCS1123A2AQDVGR"+ },+ "distributor_check": {+ "checked_at": "2026-10-20T22:37:33Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TMCS1123A2AQDVGRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TMCS1123A2AQDVGR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "IN+",+ "type": "input",+ "description": "Positive input current pin; the measured current flows into and out of IN+ and IN- through the isolated high-voltage-side lead frame."+ },+ {+ "number": "2",+ "name": "IN-",+ "type": "input",+ "description": "Negative input current pin; the measured current flows into and out of IN+ and IN- through the isolated high-voltage-side lead frame."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Analog ground for the low-voltage isolated side."+ },+ {+ "number": "4",+ "name": "ALERT",+ "type": "output",+ "description": "Sensor diagnostic PWM output, open-drain and active low at 8 kHz, with duty cycle indicating thermal and/or sensor alert state; connect to GND when not used."+ },+ {+ "number": "5",+ "name": "VREF",+ "type": "power_in",+ "description": "Zero-current output voltage reference, brought out so that reference error can be removed at system level; leave floating when not used."+ },+ {+ "number": "6",+ "name": "VOUT",+ "type": "output",+ "description": "Analog output voltage proportional to input current; the linear output is limited to VS - 100 mV at the top and 100 mV above GND at the bottom."+ },+ {+ "number": "7",+ "name": "OC",+ "type": "output",+ "description": "Overcurrent output, open-drain and active low; connect to GND when not used."+ },+ {+ "number": "8",+ "name": "VS",+ "type": "power_in",+ "description": "Low-voltage supply, operating from 3 V to 5.5 V and typically decoupled with a 0.1 µF low-ESR capacitor placed close to the VS and GND pins."+ },+ {+ "number": "9",+ "name": "VOC",+ "type": "input",+ "description": "Overcurrent threshold input that sets the overcurrent level through VOC = S x IOC / 2.5, with 120 kΩ input impedance; connect to VS when not used."+ },+ {+ "number": "10",+ "name": "NC",+ "type": "unconnected",+ "description": "Reserved pin that may be connected to GND or left floating."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: ALERT and OC are open-drain, active-low outputs; the KiCad output class is used because the schema h; Analog pins are mapped to KiCad input/output classes as no analog class exists in the schema; the da"+ ],+ "pages_sent": 31,+ "cost_usd": 0.1462,+ "at": "2026-10-20T22:27:55"+ },+ "datasheet": {+ "url": "https://www.ti.com.cn/cn/lit/ds/symlink/tmcs1123.pdf?ts=1734489631374&ref_url=https%253A%252F%252Fwww.ti.com.cn%252Fsitesearch%252Fzh-cn%252Fdocs%252Funiversalsearch.tsp%253FlangPref%253Dzh-CN%2526nr%253D9%2526searchTerm%253DTMCS1123A2AQDVGR",+ "pages": 48,+ "sha256": "79c34d3aec782be0",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 10,+ "described": 10,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tmcs1123a2aqdvgr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.06,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "470223f3f6d456894dea19a2b8c36e903b25b437d6874e27373f57f28ca2d473",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tmcs1123a2aqdvgr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.06,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a3408200c58e48eddaf355bf06ff8d4494f29a532a755f549a0a52e34f711b67",+ "checked": "2026-10-20",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
tmcs1123a2aqdvgr-etched.glbadded⋯ 1 unchanged line ⋯
tmcs1123a2aqdvgr-hero.glbadded⋯ 1 unchanged line ⋯
tmcs1123a2aqdvgr-hero.overlay.jsonadded+304@@ -0,0 +1,304 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "TMCS1123A2AQDVGR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 10,+ "span_mm": 6.9,+ "dash_mm": 0.1725,+ "gap_mm": 0.1035,+ "pad_stroke_mm": 0.0414+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 10,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.03,+ 3.03,+ -2.225,+ 2.225+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.3,+ 2.3+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "tmcs1123a2aqdvgr-etched.glb",+ "glb_sha256": "c7e9806ce973858a3a9e93dcfbdeb6adc1c13b519efae6db63fe48e627783a11",+ "footprint": "tmcs1123a2aqdvgr.kicad_mod",+ "footprint_sha256": "24476bad03fba96ea248f60527caa9615991c2c72a0d416a63ddab76ee75741a",+ "pins": "page.json component.pins",+ "pins_sha256": "92ea82da5ae8e2cd1995bfb18df655bd19f86c3811b60fd9ddbb02cae44281e1"+ },+ "generator": "adom-wiki 1.7.76 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "IN+",+ "x": -4.165,+ "y": -2.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "2",+ "text": "IN-",+ "x": -3.575,+ "y": -1.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "3",+ "text": "GND",+ "x": -3.575,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "4",+ "text": "ALERT",+ "x": -3.575,+ "y": 1.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "5",+ "text": "VREF",+ "x": -3.575,+ "y": 2.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "6",+ "text": "VOUT",+ "x": 3.575,+ "y": 2.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "7",+ "text": "OC",+ "x": 3.575,+ "y": 1.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "8",+ "text": "VS",+ "x": 3.575,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "9",+ "text": "VOC",+ "x": 3.575,+ "y": -1.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "10",+ "text": "NC",+ "x": 3.575,+ "y": -2.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.6625,+ -2.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.6625,+ -1.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.6625,+ 0.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.6625,+ 1.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -2.6625,+ 2.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.6625,+ 2.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.6625,+ 1.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.6625,+ 0.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ 2.6625,+ -1.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ 2.6625,+ -2.0+ ],+ "size_mm": [+ 1.575,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}
tmcs1123a2aqdvgr.glbadded⋯ 1 unchanged line ⋯
tmcs1123a2aqdvgr.kicad_modadded+276@@ -0,0 +1,276 @@+(footprint "SOIC-10_3.9x4.9mm_P1mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "SOIC, 10 Pin (https://www.onsemi.com/pub/Collateral/751BQ.PDF)")+ (tags "SOIC SO SOIC-10 NB")+ (property "Reference" "REF**"+ (at 0 -3.4 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "SOIC-10_3.9x4.9mm_P1mm"+ (at 0 3.4 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -2.06 -2.56)+ (end 2.06 -2.56)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 2.06 2.56)+ (end -2.06 2.56)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -3.71 -2)+ (xy -4.04 -1.76)+ (xy -4.04 -2.24)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_line+ (start -3.7 -2.55)+ (end -2.2 -2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -3.7 2.55)+ (end -3.7 -2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.2 -2.7)+ (end 2.2 -2.7)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.2 -2.55)+ (end -2.2 -2.7)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.2 2.55)+ (end -3.7 2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.2 2.7)+ (end -2.2 2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.2 -2.7)+ (end 2.2 -2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.2 -2.55)+ (end 3.7 -2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.2 2.55)+ (end 2.2 2.7)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 2.2 2.7)+ (end -2.2 2.7)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.7 -2.55)+ (end 3.7 2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.7 2.55)+ (end 2.2 2.55)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_poly+ (pts+ (xy -0.975 -2.45)+ (xy 1.95 -2.45)+ (xy 1.95 2.45)+ (xy -1.95 2.45)+ (xy -1.95 -1.475)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 90)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" smd roundrect+ (at -2.6625 -2)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -2.6625 -1)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -2.6625 0)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -2.6625 1)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -2.6625 2)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at 2.6625 2)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at 2.6625 1)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at 2.6625 0)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at 2.6625 -1)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at 2.6625 -2)+ (size 1.575 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-10_3.9x4.9mm_P1mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
tmcs1123a2aqdvgr.kicad_symadded+53@@ -0,0 +1,53 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "TMCS1123A2AQDVGR" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 10.16 0) (effects (font (size 1.27 1.27))))+ (property "Value" "TMCS1123A2AQDVGR" (at 0 -10.16 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "TMCS1123A2AQDVGR_0_1"+ (rectangle (start -12.70 7.62) (end 12.70 -7.62)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "TMCS1123A2AQDVGR_1_1"+ (pin input line (at -17.78 5.08 0) (length 5.08)+ (name "IN+" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 2.54 0) (length 5.08)+ (name "IN-" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 0.00 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -2.54 0) (length 5.08)+ (name "ALERT" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -5.08 0) (length 5.08)+ (name "VREF" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin no_connect line (at 17.78 5.08 180) (length 5.08)+ (name "NC" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 2.54 180) (length 5.08)+ (name "VOC" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 0.00 180) (length 5.08)+ (name "VS" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -2.54 180) (length 5.08)+ (name "OC" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -5.08 180) (length 5.08)+ (name "VOUT" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
tmcs1123a2aqdvgr.lbradded+132@@ -0,0 +1,132 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="SOIC-10_3.9x4.9mm_P1mm">+ <description>SOIC-10, 3.9 x 4.9 mm, 1 mm pitch</description>+ <smd name="1" x="-2.6625" y="2.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="2" x="-2.6625" y="1.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="3" x="-2.6625" y="-0.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="4" x="-2.6625" y="-1.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="5" x="-2.6625" y="-2.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="6" x="2.6625" y="-2.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="7" x="2.6625" y="-1.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="8" x="2.6625" y="-0.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="9" x="2.6625" y="1.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <smd name="10" x="2.6625" y="2.0000" dx="1.5750" dy="0.6000" layer="1" roundness="50"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-3.7100" y="2.0000"/>+ <vertex x="-4.0400" y="1.7600"/>+ <vertex x="-4.0400" y="2.2400"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.9750" y="2.4500"/>+ <vertex x="1.9500" y="2.4500"/>+ <vertex x="1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="-2.4500"/>+ <vertex x="-1.9500" y="1.4750"/>+ </polygon>+ <wire x1="-2.0600" y1="2.5600" x2="2.0600" y2="2.5600" width="0.1200" layer="21"/>+ <wire x1="2.0600" y1="-2.5600" x2="-2.0600" y2="-2.5600" width="0.1200" layer="21"/>+ <text x="0" y="3.388" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-3.388" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="TMCS1123A2AQDVGR">+ <wire x1="-12.7" y1="7.62" x2="12.7" y2="7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="7.62" x2="12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="7.62" width="0.254" layer="94"/>+ <text x="0.0000" y="10.1600" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="IN+" x="-17.78" y="5.08" length="middle" direction="in"/>+ <pin name="IN-" x="-17.78" y="2.54" length="middle" direction="in"/>+ <pin name="GND" x="-17.78" y="0" length="middle" direction="pwr"/>+ <pin name="ALERT" x="-17.78" y="-2.54" length="middle" direction="out"/>+ <pin name="VREF" x="-17.78" y="-5.08" length="middle" direction="pwr"/>+ <pin name="NC" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+ <pin name="VOC" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>+ <pin name="VS" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+ <pin name="OC" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>+ <pin name="VOUT" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="TMCS1123A2AQDVGR" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="TMCS1123A2AQDVGR" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="SOIC-10_3.9x4.9mm_P1mm">+ <connects>+ <connect gate="G$1" pin="IN+" pad="1"/>+ <connect gate="G$1" pin="IN-" pad="2"/>+ <connect gate="G$1" pin="GND" pad="3"/>+ <connect gate="G$1" pin="ALERT" pad="4"/>+ <connect gate="G$1" pin="VREF" pad="5"/>+ <connect gate="G$1" pin="NC" pad="10"/>+ <connect gate="G$1" pin="VOC" pad="9"/>+ <connect gate="G$1" pin="VS" pad="8"/>+ <connect gate="G$1" pin="OC" pad="7"/>+ <connect gate="G$1" pin="VOUT" pad="6"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
tmcs1123a2aqdvgr.stepadded+9100@@ -0,0 +1,9100 @@+ISO-10303-21;+HEADER;+FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');+FILE_NAME('Open CASCADE Shape Model','2026-10-20T22:31:20',('Author'),(+ 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9'+ ,'Unknown');+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;+DATA;+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',+ 'automotive_design',2000,#2);+#2 = APPLICATION_CONTEXT(+ 'core data for automotive mechanical design processes');+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);+#5 = PRODUCT_DEFINITION('design','',#6,#9);+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);+#7 = PRODUCT('TMCS1123A2AQDVGR','TMCS1123A2AQDVGR','',(#8));+#8 = PRODUCT_CONTEXT('',#2,'mechanical');+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10 = SHAPE_REPRESENTATION('',(#11,#15,#655,#1297,#1939,#2581,#3223,+ #3865,#4507,#5149,#5791,#6433,#7075),#7173);+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12 = CARTESIAN_POINT('',(0.,0.,0.));+#13 = DIRECTION('',(0.,0.,1.));+#14 = DIRECTION('',(1.,0.,-0.));+#15 = MANIFOLD_SOLID_BREP('',#16);+#16 = CLOSED_SHELL('',(#17,#137,#218,#299,#348,#397,#429,#478,#562,#589,+ #596,#651));+#17 = ADVANCED_FACE('',(#18),#32,.F.);+#18 = FACE_BOUND('',#19,.F.);+#19 = EDGE_LOOP('',(#20,#55,#83,#111));+#20 = ORIENTED_EDGE('',*,*,#21,.F.);+#21 = EDGE_CURVE('',#22,#24,#26,.T.);+#22 = VERTEX_POINT('',#23);+#23 = CARTESIAN_POINT('',(-1.95,-2.45,0.15));+#24 = VERTEX_POINT('',#25);+#25 = CARTESIAN_POINT('',(-1.95,-2.45,1.67));+#26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.);+#27 = LINE('',#28,#29);+#28 = CARTESIAN_POINT('',(-1.95,-2.45,0.15));+#29 = VECTOR('',#30,1.);+#30 = DIRECTION('',(0.,0.,1.));+#31 = PCURVE('',#32,#37);+#32 = PLANE('',#33);+#33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);+#34 = CARTESIAN_POINT('',(-1.95,-2.45,0.15));+#35 = DIRECTION('',(1.,0.,0.));+#36 = DIRECTION('',(0.,0.,1.));+#37 = DEFINITIONAL_REPRESENTATION('',(#38),#42);+#38 = LINE('',#39,#40);+#39 = CARTESIAN_POINT('',(0.,0.));+#40 = VECTOR('',#41,1.);+#41 = DIRECTION('',(1.,0.));+#42 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#43 = PCURVE('',#44,#49);+#44 = PLANE('',#45);+#45 = AXIS2_PLACEMENT_3D('',#46,#47,#48);+#46 = CARTESIAN_POINT('',(-1.95,-2.45,0.15));+#47 = DIRECTION('',(0.,1.,0.));+#48 = DIRECTION('',(0.,0.,1.));+#49 = DEFINITIONAL_REPRESENTATION('',(#50),#54);+#50 = LINE('',#51,#52);+#51 = CARTESIAN_POINT('',(0.,0.));+#52 = VECTOR('',#53,1.);+#53 = DIRECTION('',(1.,0.));+#54 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#55 = ORIENTED_EDGE('',*,*,#56,.T.);+#56 = EDGE_CURVE('',#22,#57,#59,.T.);+#57 = VERTEX_POINT('',#58);+#58 = CARTESIAN_POINT('',(-1.95,2.45,0.15));+#59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.);+#60 = LINE('',#61,#62);+#61 = CARTESIAN_POINT('',(-1.95,-2.45,0.15));+#62 = VECTOR('',#63,1.);+#63 = DIRECTION('',(0.,1.,0.));+#64 = PCURVE('',#32,#65);+#65 = DEFINITIONAL_REPRESENTATION('',(#66),#70);+#66 = LINE('',#67,#68);+#67 = CARTESIAN_POINT('',(0.,0.));+#68 = VECTOR('',#69,1.);+#69 = DIRECTION('',(0.,-1.));+#70 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#71 = PCURVE('',#72,#77);+#72 = PLANE('',#73);+#73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);+#74 = CARTESIAN_POINT('',(-1.95,-2.45,0.15));+#75 = DIRECTION('',(0.,0.,1.));+#76 = DIRECTION('',(1.,0.,0.));+#77 = DEFINITIONAL_REPRESENTATION('',(#78),#82);+#78 = LINE('',#79,#80);+#79 = CARTESIAN_POINT('',(0.,0.));+#80 = VECTOR('',#81,1.);+#81 = DIRECTION('',(0.,1.));+#82 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#83 = ORIENTED_EDGE('',*,*,#84,.T.);+#84 = EDGE_CURVE('',#57,#85,#87,.T.);+#85 = VERTEX_POINT('',#86);+#86 = CARTESIAN_POINT('',(-1.95,2.45,1.67));+#87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.);+#88 = LINE('',#89,#90);+#89 = CARTESIAN_POINT('',(-1.95,2.45,0.15));+#90 = VECTOR('',#91,1.);+#91 = DIRECTION('',(0.,0.,1.));+#92 = PCURVE('',#32,#93);+#93 = DEFINITIONAL_REPRESENTATION('',(#94),#98);+#94 = LINE('',#95,#96);+#95 = CARTESIAN_POINT('',(0.,-4.9));+#96 = VECTOR('',#97,1.);+#97 = DIRECTION('',(1.,0.));+#98 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#99 = PCURVE('',#100,#105);+#100 = PLANE('',#101);+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);+#102 = CARTESIAN_POINT('',(-1.95,2.45,0.15));+#103 = DIRECTION('',(0.,1.,0.));+#104 = DIRECTION('',(0.,0.,1.));+#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);+#106 = LINE('',#107,#108);+#107 = CARTESIAN_POINT('',(0.,0.));+#108 = VECTOR('',#109,1.);+#109 = DIRECTION('',(1.,0.));+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#111 = ORIENTED_EDGE('',*,*,#112,.F.);+#112 = EDGE_CURVE('',#24,#85,#113,.T.);+#113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.);+#114 = LINE('',#115,#116);+#115 = CARTESIAN_POINT('',(-1.95,-2.45,1.67));+#116 = VECTOR('',#117,1.);+#117 = DIRECTION('',(0.,1.,0.));+#118 = PCURVE('',#32,#119);+#119 = DEFINITIONAL_REPRESENTATION('',(#120),#124);+#120 = LINE('',#121,#122);+#121 = CARTESIAN_POINT('',(1.52,0.));+#122 = VECTOR('',#123,1.);+#123 = DIRECTION('',(0.,-1.));+#124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#125 = PCURVE('',#126,#131);+#126 = PLANE('',#127);+#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);+#128 = CARTESIAN_POINT('',(-1.91,-2.45,1.71));+#129 = DIRECTION('',(0.707106781187,0.,-0.707106781187));+#130 = DIRECTION('',(0.,1.,0.));+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);+#132 = LINE('',#133,#134);+#133 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#134 = VECTOR('',#135,1.);+#135 = DIRECTION('',(1.,0.));+#136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#137 = ADVANCED_FACE('',(#138),#44,.F.);+#138 = FACE_BOUND('',#139,.F.);+#139 = EDGE_LOOP('',(#140,#170,#191,#192));+#140 = ORIENTED_EDGE('',*,*,#141,.F.);+#141 = EDGE_CURVE('',#142,#144,#146,.T.);+#142 = VERTEX_POINT('',#143);+#143 = CARTESIAN_POINT('',(1.95,-2.45,0.15));+#144 = VERTEX_POINT('',#145);+#145 = CARTESIAN_POINT('',(1.95,-2.45,1.67));+#146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.);+#147 = LINE('',#148,#149);+#148 = CARTESIAN_POINT('',(1.95,-2.45,0.15));+#149 = VECTOR('',#150,1.);+#150 = DIRECTION('',(0.,0.,1.));+#151 = PCURVE('',#44,#152);+#152 = DEFINITIONAL_REPRESENTATION('',(#153),#157);+#153 = LINE('',#154,#155);+#154 = CARTESIAN_POINT('',(0.,3.9));+#155 = VECTOR('',#156,1.);+#156 = DIRECTION('',(1.,0.));+#157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#158 = PCURVE('',#159,#164);+#159 = PLANE('',#160);+#160 = AXIS2_PLACEMENT_3D('',#161,#162,#163);+#161 = CARTESIAN_POINT('',(1.95,-2.45,0.15));+#162 = DIRECTION('',(1.,0.,0.));+#163 = DIRECTION('',(0.,0.,1.));+#164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);+#165 = LINE('',#166,#167);+#166 = CARTESIAN_POINT('',(0.,0.));+#167 = VECTOR('',#168,1.);+#168 = DIRECTION('',(1.,0.));+#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#170 = ORIENTED_EDGE('',*,*,#171,.F.);+#171 = EDGE_CURVE('',#22,#142,#172,.T.);+#172 = SURFACE_CURVE('',#173,(#177,#184),.PCURVE_S1.);+#173 = LINE('',#174,#175);+#174 = CARTESIAN_POINT('',(-1.95,-2.45,0.15));+#175 = VECTOR('',#176,1.);+#176 = DIRECTION('',(1.,0.,0.));+#177 = PCURVE('',#44,#178);+#178 = DEFINITIONAL_REPRESENTATION('',(#179),#183);+#179 = LINE('',#180,#181);+#180 = CARTESIAN_POINT('',(0.,0.));+#181 = VECTOR('',#182,1.);+#182 = DIRECTION('',(0.,1.));+#183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#184 = PCURVE('',#72,#185);+#185 = DEFINITIONAL_REPRESENTATION('',(#186),#190);+#186 = LINE('',#187,#188);+#187 = CARTESIAN_POINT('',(0.,0.));+#188 = VECTOR('',#189,1.);+#189 = DIRECTION('',(1.,0.));+#190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#191 = ORIENTED_EDGE('',*,*,#21,.T.);+#192 = ORIENTED_EDGE('',*,*,#193,.T.);+#193 = EDGE_CURVE('',#24,#144,#194,.T.);+#194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.);+#195 = LINE('',#196,#197);+#196 = CARTESIAN_POINT('',(-1.95,-2.45,1.67));+#197 = VECTOR('',#198,1.);+#198 = DIRECTION('',(1.,0.,0.));+#199 = PCURVE('',#44,#200);+#200 = DEFINITIONAL_REPRESENTATION('',(#201),#205);+#201 = LINE('',#202,#203);+#202 = CARTESIAN_POINT('',(1.52,0.));+#203 = VECTOR('',#204,1.);+#204 = DIRECTION('',(0.,1.));+#205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#206 = PCURVE('',#207,#212);+#207 = PLANE('',#208);+#208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);+#209 = CARTESIAN_POINT('',(-1.95,-2.41,1.71));+#210 = DIRECTION('',(0.,0.707106781187,-0.707106781187));+#211 = DIRECTION('',(-1.,0.,0.));+#212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);+#213 = LINE('',#214,#215);+#214 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#215 = VECTOR('',#216,1.);+#216 = DIRECTION('',(-1.,0.));+#217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#218 = ADVANCED_FACE('',(#219),#126,.F.);+#219 = FACE_BOUND('',#220,.F.);+#220 = EDGE_LOOP('',(#221,#244,#245,#273));+#221 = ORIENTED_EDGE('',*,*,#222,.F.);+#222 = EDGE_CURVE('',#24,#223,#225,.T.);+#223 = VERTEX_POINT('',#224);+#224 = CARTESIAN_POINT('',(-1.87,-2.37,1.75));+#225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.);+#226 = LINE('',#227,#228);+#227 = CARTESIAN_POINT('',(-1.923333333333,-2.423333333333,+ 1.696666666667));+#228 = VECTOR('',#229,1.);+#229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919));+#230 = PCURVE('',#126,#231);+#231 = DEFINITIONAL_REPRESENTATION('',(#232),#236);+#232 = LINE('',#233,#234);+#233 = CARTESIAN_POINT('',(2.6666666667E-02,-1.885618083117E-02));+#234 = VECTOR('',#235,1.);+#235 = DIRECTION('',(0.57735026919,0.816496580928));+#236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#237 = PCURVE('',#207,#238);+#238 = DEFINITIONAL_REPRESENTATION('',(#239),#243);+#239 = LINE('',#240,#241);+#240 = CARTESIAN_POINT('',(-2.6666666667E-02,-1.885618083117E-02));+#241 = VECTOR('',#242,1.);+#242 = DIRECTION('',(-0.57735026919,0.816496580928));+#243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#244 = ORIENTED_EDGE('',*,*,#112,.T.);+#245 = ORIENTED_EDGE('',*,*,#246,.T.);+#246 = EDGE_CURVE('',#85,#247,#249,.T.);+#247 = VERTEX_POINT('',#248);+#248 = CARTESIAN_POINT('',(-1.87,2.37,1.75));+#249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.);+#250 = LINE('',#251,#252);+#251 = CARTESIAN_POINT('',(-1.106666666667,1.606666666667,2.513333333333+ ));+#252 = VECTOR('',#253,1.);+#253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919));+#254 = PCURVE('',#126,#255);+#255 = DEFINITIONAL_REPRESENTATION('',(#256),#260);+#256 = LINE('',#257,#258);+#257 = CARTESIAN_POINT('',(4.056666666667,1.136084895106));+#258 = VECTOR('',#259,1.);+#259 = DIRECTION('',(-0.57735026919,0.816496580928));+#260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#261 = PCURVE('',#262,#267);+#262 = PLANE('',#263);+#263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);+#264 = CARTESIAN_POINT('',(-1.95,2.41,1.71));+#265 = DIRECTION('',(0.,0.707106781187,0.707106781187));+#266 = DIRECTION('',(-1.,0.,0.));+#267 = DEFINITIONAL_REPRESENTATION('',(#268),#272);+#268 = LINE('',#269,#270);+#269 = CARTESIAN_POINT('',(-0.843333333333,1.136084895106));+#270 = VECTOR('',#271,1.);+#271 = DIRECTION('',(-0.57735026919,0.816496580928));+#272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#273 = ORIENTED_EDGE('',*,*,#274,.F.);+#274 = EDGE_CURVE('',#223,#247,#275,.T.);+#275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.);+#276 = LINE('',#277,#278);+#277 = CARTESIAN_POINT('',(-1.87,-2.45,1.75));+#278 = VECTOR('',#279,1.);+#279 = DIRECTION('',(0.,1.,0.));+#280 = PCURVE('',#126,#281);+#281 = DEFINITIONAL_REPRESENTATION('',(#282),#286);+#282 = LINE('',#283,#284);+#283 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#284 = VECTOR('',#285,1.);+#285 = DIRECTION('',(1.,0.));+#286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#287 = PCURVE('',#288,#293);+#288 = PLANE('',#289);+#289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);+#290 = CARTESIAN_POINT('',(-1.95,-2.45,1.75));+#291 = DIRECTION('',(0.,0.,1.));+#292 = DIRECTION('',(1.,0.,0.));+#293 = DEFINITIONAL_REPRESENTATION('',(#294),#298);+#294 = LINE('',#295,#296);+#295 = CARTESIAN_POINT('',(8.E-02,0.));+#296 = VECTOR('',#297,1.);+#297 = DIRECTION('',(0.,1.));+#298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#299 = ADVANCED_FACE('',(#300),#72,.F.);+#300 = FACE_BOUND('',#301,.F.);+#301 = EDGE_LOOP('',(#302,#303,#304,#327));+#302 = ORIENTED_EDGE('',*,*,#56,.F.);+#303 = ORIENTED_EDGE('',*,*,#171,.T.);+#304 = ORIENTED_EDGE('',*,*,#305,.T.);+#305 = EDGE_CURVE('',#142,#306,#308,.T.);+#306 = VERTEX_POINT('',#307);+#307 = CARTESIAN_POINT('',(1.95,2.45,0.15));+#308 = SURFACE_CURVE('',#309,(#313,#320),.PCURVE_S1.);+#309 = LINE('',#310,#311);+#310 = CARTESIAN_POINT('',(1.95,-2.45,0.15));+#311 = VECTOR('',#312,1.);+#312 = DIRECTION('',(0.,1.,0.));+#313 = PCURVE('',#72,#314);+#314 = DEFINITIONAL_REPRESENTATION('',(#315),#319);+#315 = LINE('',#316,#317);+#316 = CARTESIAN_POINT('',(3.9,0.));+#317 = VECTOR('',#318,1.);+#318 = DIRECTION('',(0.,1.));+#319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#320 = PCURVE('',#159,#321);+#321 = DEFINITIONAL_REPRESENTATION('',(#322),#326);+#322 = LINE('',#323,#324);+#323 = CARTESIAN_POINT('',(0.,0.));+#324 = VECTOR('',#325,1.);+#325 = DIRECTION('',(0.,-1.));+#326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#327 = ORIENTED_EDGE('',*,*,#328,.F.);+#328 = EDGE_CURVE('',#57,#306,#329,.T.);+#329 = SURFACE_CURVE('',#330,(#334,#341),.PCURVE_S1.);+#330 = LINE('',#331,#332);+#331 = CARTESIAN_POINT('',(-1.95,2.45,0.15));+#332 = VECTOR('',#333,1.);+#333 = DIRECTION('',(1.,0.,0.));+#334 = PCURVE('',#72,#335);+#335 = DEFINITIONAL_REPRESENTATION('',(#336),#340);+#336 = LINE('',#337,#338);+#337 = CARTESIAN_POINT('',(0.,4.9));+#338 = VECTOR('',#339,1.);+#339 = DIRECTION('',(1.,0.));+#340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#341 = PCURVE('',#100,#342);+#342 = DEFINITIONAL_REPRESENTATION('',(#343),#347);+#343 = LINE('',#344,#345);+#344 = CARTESIAN_POINT('',(0.,0.));+#345 = VECTOR('',#346,1.);+#346 = DIRECTION('',(0.,1.));+#347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#348 = ADVANCED_FACE('',(#349),#100,.T.);+#349 = FACE_BOUND('',#350,.T.);+#350 = EDGE_LOOP('',(#351,#374,#375,#376));+#351 = ORIENTED_EDGE('',*,*,#352,.F.);+#352 = EDGE_CURVE('',#306,#353,#355,.T.);+#353 = VERTEX_POINT('',#354);+#354 = CARTESIAN_POINT('',(1.95,2.45,1.67));+#355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.);+#356 = LINE('',#357,#358);+#357 = CARTESIAN_POINT('',(1.95,2.45,0.15));+#358 = VECTOR('',#359,1.);+#359 = DIRECTION('',(0.,0.,1.));+#360 = PCURVE('',#100,#361);+#361 = DEFINITIONAL_REPRESENTATION('',(#362),#366);+#362 = LINE('',#363,#364);+#363 = CARTESIAN_POINT('',(0.,3.9));+#364 = VECTOR('',#365,1.);+#365 = DIRECTION('',(1.,0.));+#366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#367 = PCURVE('',#159,#368);+#368 = DEFINITIONAL_REPRESENTATION('',(#369),#373);+#369 = LINE('',#370,#371);+#370 = CARTESIAN_POINT('',(0.,-4.9));+#371 = VECTOR('',#372,1.);+#372 = DIRECTION('',(1.,0.));+#373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#374 = ORIENTED_EDGE('',*,*,#328,.F.);+#375 = ORIENTED_EDGE('',*,*,#84,.T.);+#376 = ORIENTED_EDGE('',*,*,#377,.T.);+#377 = EDGE_CURVE('',#85,#353,#378,.T.);+#378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.);+#379 = LINE('',#380,#381);+#380 = CARTESIAN_POINT('',(-1.95,2.45,1.67));+#381 = VECTOR('',#382,1.);+#382 = DIRECTION('',(1.,0.,0.));+#383 = PCURVE('',#100,#384);+#384 = DEFINITIONAL_REPRESENTATION('',(#385),#389);+#385 = LINE('',#386,#387);+#386 = CARTESIAN_POINT('',(1.52,0.));+#387 = VECTOR('',#388,1.);+#388 = DIRECTION('',(0.,1.));+#389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#390 = PCURVE('',#262,#391);+#391 = DEFINITIONAL_REPRESENTATION('',(#392),#396);+#392 = LINE('',#393,#394);+#393 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#394 = VECTOR('',#395,1.);+#395 = DIRECTION('',(-1.,0.));+#396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#397 = ADVANCED_FACE('',(#398),#159,.T.);+#398 = FACE_BOUND('',#399,.T.);+#399 = EDGE_LOOP('',(#400,#401,#402,#403));+#400 = ORIENTED_EDGE('',*,*,#141,.F.);+#401 = ORIENTED_EDGE('',*,*,#305,.T.);+#402 = ORIENTED_EDGE('',*,*,#352,.T.);+#403 = ORIENTED_EDGE('',*,*,#404,.F.);+#404 = EDGE_CURVE('',#144,#353,#405,.T.);+#405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.);+#406 = LINE('',#407,#408);+#407 = CARTESIAN_POINT('',(1.95,-2.45,1.67));+#408 = VECTOR('',#409,1.);+#409 = DIRECTION('',(0.,1.,0.));+#410 = PCURVE('',#159,#411);+#411 = DEFINITIONAL_REPRESENTATION('',(#412),#416);+#412 = LINE('',#413,#414);+#413 = CARTESIAN_POINT('',(1.52,0.));+#414 = VECTOR('',#415,1.);+#415 = DIRECTION('',(0.,-1.));+#416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#417 = PCURVE('',#418,#423);+#418 = PLANE('',#419);+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);+#420 = CARTESIAN_POINT('',(1.91,-2.45,1.71));+#421 = DIRECTION('',(0.707106781187,0.,0.707106781187));+#422 = DIRECTION('',(0.,1.,0.));+#423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);+#424 = LINE('',#425,#426);+#425 = CARTESIAN_POINT('',(0.,-5.656854249492E-02));+#426 = VECTOR('',#427,1.);+#427 = DIRECTION('',(1.,0.));+#428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#429 = ADVANCED_FACE('',(#430),#207,.F.);+#430 = FACE_BOUND('',#431,.T.);+#431 = EDGE_LOOP('',(#432,#433,#434,#457));+#432 = ORIENTED_EDGE('',*,*,#222,.F.);+#433 = ORIENTED_EDGE('',*,*,#193,.T.);+#434 = ORIENTED_EDGE('',*,*,#435,.T.);+#435 = EDGE_CURVE('',#144,#436,#438,.T.);+#436 = VERTEX_POINT('',#437);+#437 = CARTESIAN_POINT('',(1.87,-2.37,1.75));+#438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.);+#439 = LINE('',#440,#441);+#440 = CARTESIAN_POINT('',(1.273333333333,-1.773333333333,2.346666666667+ ));+#441 = VECTOR('',#442,1.);+#442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919));+#443 = PCURVE('',#207,#444);+#444 = DEFINITIONAL_REPRESENTATION('',(#445),#449);+#445 = LINE('',#446,#447);+#446 = CARTESIAN_POINT('',(-3.223333333333,0.900382634711));+#447 = VECTOR('',#448,1.);+#448 = DIRECTION('',(0.57735026919,0.816496580928));+#449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#450 = PCURVE('',#418,#451);+#451 = DEFINITIONAL_REPRESENTATION('',(#452),#456);+#452 = LINE('',#453,#454);+#453 = CARTESIAN_POINT('',(0.676666666667,0.900382634711));+#454 = VECTOR('',#455,1.);+#455 = DIRECTION('',(0.57735026919,0.816496580928));+#456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#457 = ORIENTED_EDGE('',*,*,#458,.F.);+#458 = EDGE_CURVE('',#223,#436,#459,.T.);+#459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.);+#460 = LINE('',#461,#462);+#461 = CARTESIAN_POINT('',(-1.95,-2.37,1.75));+#462 = VECTOR('',#463,1.);+#463 = DIRECTION('',(1.,0.,0.));+#464 = PCURVE('',#207,#465);+#465 = DEFINITIONAL_REPRESENTATION('',(#466),#470);+#466 = LINE('',#467,#468);+#467 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#468 = VECTOR('',#469,1.);+#469 = DIRECTION('',(-1.,0.));+#470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#471 = PCURVE('',#288,#472);+#472 = DEFINITIONAL_REPRESENTATION('',(#473),#477);+#473 = LINE('',#474,#475);+#474 = CARTESIAN_POINT('',(0.,8.E-02));+#475 = VECTOR('',#476,1.);+#476 = DIRECTION('',(1.,0.));+#477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#478 = ADVANCED_FACE('',(#479,#527),#288,.T.);+#479 = FACE_BOUND('',#480,.T.);+#480 = EDGE_LOOP('',(#481,#482,#483,#506));+#481 = ORIENTED_EDGE('',*,*,#274,.F.);+#482 = ORIENTED_EDGE('',*,*,#458,.T.);+#483 = ORIENTED_EDGE('',*,*,#484,.T.);+#484 = EDGE_CURVE('',#436,#485,#487,.T.);+#485 = VERTEX_POINT('',#486);+#486 = CARTESIAN_POINT('',(1.87,2.37,1.75));+#487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.);+#488 = LINE('',#489,#490);+#489 = CARTESIAN_POINT('',(1.87,-2.45,1.75));+#490 = VECTOR('',#491,1.);+#491 = DIRECTION('',(0.,1.,0.));+#492 = PCURVE('',#288,#493);+#493 = DEFINITIONAL_REPRESENTATION('',(#494),#498);+#494 = LINE('',#495,#496);+#495 = CARTESIAN_POINT('',(3.82,0.));+#496 = VECTOR('',#497,1.);+#497 = DIRECTION('',(0.,1.));+#498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#499 = PCURVE('',#418,#500);+#500 = DEFINITIONAL_REPRESENTATION('',(#501),#505);+#501 = LINE('',#502,#503);+#502 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#503 = VECTOR('',#504,1.);+#504 = DIRECTION('',(1.,0.));+#505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#506 = ORIENTED_EDGE('',*,*,#507,.F.);+#507 = EDGE_CURVE('',#247,#485,#508,.T.);+#508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.);+#509 = LINE('',#510,#511);+#510 = CARTESIAN_POINT('',(-1.95,2.37,1.75));+#511 = VECTOR('',#512,1.);+#512 = DIRECTION('',(1.,0.,0.));+#513 = PCURVE('',#288,#514);+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);+#515 = LINE('',#516,#517);+#516 = CARTESIAN_POINT('',(0.,4.82));+#517 = VECTOR('',#518,1.);+#518 = DIRECTION('',(1.,0.));+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#520 = PCURVE('',#262,#521);+#521 = DEFINITIONAL_REPRESENTATION('',(#522),#526);+#522 = LINE('',#523,#524);+#523 = CARTESIAN_POINT('',(0.,5.656854249492E-02));+#524 = VECTOR('',#525,1.);+#525 = DIRECTION('',(-1.,0.));+#526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#527 = FACE_BOUND('',#528,.T.);+#528 = EDGE_LOOP('',(#529));+#529 = ORIENTED_EDGE('',*,*,#530,.T.);+#530 = EDGE_CURVE('',#531,#531,#533,.T.);+#531 = VERTEX_POINT('',#532);+#532 = CARTESIAN_POINT('',(-1.17,1.943,1.75));+#533 = SURFACE_CURVE('',#534,(#539,#550),.PCURVE_S1.);+#534 = CIRCLE('',#535,0.273);+#535 = AXIS2_PLACEMENT_3D('',#536,#537,#538);+#536 = CARTESIAN_POINT('',(-1.443,1.943,1.75));+#537 = DIRECTION('',(0.,0.,-1.));+#538 = DIRECTION('',(1.,0.,0.));+#539 = PCURVE('',#288,#540);+#540 = DEFINITIONAL_REPRESENTATION('',(#541),#549);+#541 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#542,#543,#544,#545,#546,#547+,#548),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(+ -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718,+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(+ '') );+#542 = CARTESIAN_POINT('',(0.78,4.393));+#543 = CARTESIAN_POINT('',(0.78,3.920150129534));+#544 = CARTESIAN_POINT('',(0.3705,4.156575064767));+#545 = CARTESIAN_POINT('',(-3.9E-02,4.393));+#546 = CARTESIAN_POINT('',(0.3705,4.629424935233));+#547 = CARTESIAN_POINT('',(0.78,4.865849870466));+#548 = CARTESIAN_POINT('',(0.78,4.393));+#549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#550 = PCURVE('',#551,#556);+#551 = CYLINDRICAL_SURFACE('',#552,0.273);+#552 = AXIS2_PLACEMENT_3D('',#553,#554,#555);+#553 = CARTESIAN_POINT('',(-1.443,1.943,1.7));+#554 = DIRECTION('',(-0.,-0.,-1.));+#555 = DIRECTION('',(1.,0.,0.));+#556 = DEFINITIONAL_REPRESENTATION('',(#557),#561);+#557 = LINE('',#558,#559);+#558 = CARTESIAN_POINT('',(-4.138911435803E-13,-5.E-02));+#559 = VECTOR('',#560,1.);+#560 = DIRECTION('',(1.,-0.));+#561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#562 = ADVANCED_FACE('',(#563),#262,.T.);+#563 = FACE_BOUND('',#564,.F.);+#564 = EDGE_LOOP('',(#565,#566,#567,#588));+#565 = ORIENTED_EDGE('',*,*,#246,.F.);+#566 = ORIENTED_EDGE('',*,*,#377,.T.);+#567 = ORIENTED_EDGE('',*,*,#568,.T.);+#568 = EDGE_CURVE('',#353,#485,#569,.T.);+#569 = SURFACE_CURVE('',#570,(#574,#581),.PCURVE_S1.);+#570 = LINE('',#571,#572);+#571 = CARTESIAN_POINT('',(0.456666666667,0.956666666667,3.163333333333)+ );+#572 = VECTOR('',#573,1.);+#573 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919));+#574 = PCURVE('',#262,#575);+#575 = DEFINITIONAL_REPRESENTATION('',(#576),#580);+#576 = LINE('',#577,#578);+#577 = CARTESIAN_POINT('',(-2.406666666667,2.055323710648));+#578 = VECTOR('',#579,1.);+#579 = DIRECTION('',(0.57735026919,0.816496580928));+#580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#581 = PCURVE('',#418,#582);+#582 = DEFINITIONAL_REPRESENTATION('',(#583),#587);+#583 = LINE('',#584,#585);+#584 = CARTESIAN_POINT('',(3.406666666667,2.055323710648));+#585 = VECTOR('',#586,1.);+#586 = DIRECTION('',(-0.57735026919,0.816496580928));+#587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#588 = ORIENTED_EDGE('',*,*,#507,.F.);+#589 = ADVANCED_FACE('',(#590),#418,.T.);+#590 = FACE_BOUND('',#591,.T.);+#591 = EDGE_LOOP('',(#592,#593,#594,#595));+#592 = ORIENTED_EDGE('',*,*,#435,.F.);+#593 = ORIENTED_EDGE('',*,*,#404,.T.);+#594 = ORIENTED_EDGE('',*,*,#568,.T.);+#595 = ORIENTED_EDGE('',*,*,#484,.F.);+#596 = ADVANCED_FACE('',(#597),#551,.F.);+#597 = FACE_BOUND('',#598,.F.);+#598 = EDGE_LOOP('',(#599,#622,#623,#624));+#599 = ORIENTED_EDGE('',*,*,#600,.T.);+#600 = EDGE_CURVE('',#601,#531,#603,.T.);+#601 = VERTEX_POINT('',#602);+#602 = CARTESIAN_POINT('',(-1.17,1.943,1.7));+#603 = SEAM_CURVE('',#604,(#608,#615),.PCURVE_S1.);+#604 = LINE('',#605,#606);+#605 = CARTESIAN_POINT('',(-1.17,1.943,1.7));+#606 = VECTOR('',#607,1.);+#607 = DIRECTION('',(0.,0.,1.));+#608 = PCURVE('',#551,#609);+#609 = DEFINITIONAL_REPRESENTATION('',(#610),#614);+#610 = LINE('',#611,#612);+#611 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#612 = VECTOR('',#613,1.);+#613 = DIRECTION('',(-0.,-1.));+#614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#615 = PCURVE('',#551,#616);+#616 = DEFINITIONAL_REPRESENTATION('',(#617),#621);+#617 = LINE('',#618,#619);+#618 = CARTESIAN_POINT('',(6.28318530718,0.));+#619 = VECTOR('',#620,1.);+#620 = DIRECTION('',(-0.,-1.));+#621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#622 = ORIENTED_EDGE('',*,*,#530,.T.);+#623 = ORIENTED_EDGE('',*,*,#600,.F.);+#624 = ORIENTED_EDGE('',*,*,#625,.T.);+#625 = EDGE_CURVE('',#601,#601,#626,.T.);+#626 = SURFACE_CURVE('',#627,(#632,#639),.PCURVE_S1.);+#627 = CIRCLE('',#628,0.273);+#628 = AXIS2_PLACEMENT_3D('',#629,#630,#631);+#629 = CARTESIAN_POINT('',(-1.443,1.943,1.7));+#630 = DIRECTION('',(0.,0.,1.));+#631 = DIRECTION('',(1.,0.,0.));+#632 = PCURVE('',#551,#633);+#633 = DEFINITIONAL_REPRESENTATION('',(#634),#638);+#634 = LINE('',#635,#636);+#635 = CARTESIAN_POINT('',(6.28318530718,0.));+#636 = VECTOR('',#637,1.);+#637 = DIRECTION('',(-1.,0.));+#638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#639 = PCURVE('',#640,#645);+#640 = PLANE('',#641);+#641 = AXIS2_PLACEMENT_3D('',#642,#643,#644);+#642 = CARTESIAN_POINT('',(-1.443,1.943,1.7));+#643 = DIRECTION('',(0.,0.,1.));+#644 = DIRECTION('',(1.,0.,0.));+#645 = DEFINITIONAL_REPRESENTATION('',(#646),#650);+#646 = CIRCLE('',#647,0.273);+#647 = AXIS2_PLACEMENT_2D('',#648,#649);+#648 = CARTESIAN_POINT('',(0.,0.));+#649 = DIRECTION('',(1.,0.));+#650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#651 = ADVANCED_FACE('',(#652),#640,.T.);+#652 = FACE_BOUND('',#653,.T.);+#653 = EDGE_LOOP('',(#654));+#654 = ORIENTED_EDGE('',*,*,#625,.T.);+#655 = MANIFOLD_SOLID_BREP('',#656);+#656 = CLOSED_SHELL('',(#657,#777,#965,#1036,#1085,#1134,#1183,#1232,+ #1259,#1290));+#657 = ADVANCED_FACE('',(#658),#672,.F.);+#658 = FACE_BOUND('',#659,.F.);+#659 = EDGE_LOOP('',(#660,#695,#723,#751));+#660 = ORIENTED_EDGE('',*,*,#661,.F.);+#661 = EDGE_CURVE('',#662,#664,#666,.T.);+#662 = VERTEX_POINT('',#663);+#663 = CARTESIAN_POINT('',(-1.9,1.775,0.87));+#664 = VERTEX_POINT('',#665);+#665 = CARTESIAN_POINT('',(-1.9,2.225,0.87));+#666 = SURFACE_CURVE('',#667,(#671,#683),.PCURVE_S1.);+#667 = LINE('',#668,#669);+#668 = CARTESIAN_POINT('',(-1.9,1.775,0.87));+#669 = VECTOR('',#670,1.);+#670 = DIRECTION('',(0.,1.,0.));+#671 = PCURVE('',#672,#677);+#672 = PLANE('',#673);+#673 = AXIS2_PLACEMENT_3D('',#674,#675,#676);+#674 = CARTESIAN_POINT('',(-1.9,2.,0.87));+#675 = DIRECTION('',(-0.,-0.,-1.));+#676 = DIRECTION('',(-1.,0.,0.));+#677 = DEFINITIONAL_REPRESENTATION('',(#678),#682);+#678 = LINE('',#679,#680);+#679 = CARTESIAN_POINT('',(0.,-0.225));+#680 = VECTOR('',#681,1.);+#681 = DIRECTION('',(0.,1.));+#682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#683 = PCURVE('',#684,#689);+#684 = PLANE('',#685);+#685 = AXIS2_PLACEMENT_3D('',#686,#687,#688);+#686 = CARTESIAN_POINT('',(-1.9,2.,0.72));+#687 = DIRECTION('',(-1.,0.,0.));+#688 = DIRECTION('',(0.,0.,1.));+#689 = DEFINITIONAL_REPRESENTATION('',(#690),#694);+#690 = LINE('',#691,#692);+#691 = CARTESIAN_POINT('',(0.15,-0.225));+#692 = VECTOR('',#693,1.);+#693 = DIRECTION('',(0.,1.));+#694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#695 = ORIENTED_EDGE('',*,*,#696,.T.);+#696 = EDGE_CURVE('',#662,#697,#699,.T.);+#697 = VERTEX_POINT('',#698);+#698 = CARTESIAN_POINT('',(-2.1,1.775,0.87));+#699 = SURFACE_CURVE('',#700,(#704,#711),.PCURVE_S1.);+#700 = LINE('',#701,#702);+#701 = CARTESIAN_POINT('',(-1.9,1.775,0.87));+#702 = VECTOR('',#703,1.);+#703 = DIRECTION('',(-1.,0.,0.));+#704 = PCURVE('',#672,#705);+#705 = DEFINITIONAL_REPRESENTATION('',(#706),#710);+#706 = LINE('',#707,#708);+#707 = CARTESIAN_POINT('',(0.,-0.225));+#708 = VECTOR('',#709,1.);+#709 = DIRECTION('',(1.,0.));+#710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#711 = PCURVE('',#712,#717);+#712 = PLANE('',#713);+#713 = AXIS2_PLACEMENT_3D('',#714,#715,#716);+#714 = CARTESIAN_POINT('',(-2.38850950278,1.775,0.318416529686));+#715 = DIRECTION('',(-0.,-1.,-0.));+#716 = DIRECTION('',(0.,0.,-1.));+#717 = DEFINITIONAL_REPRESENTATION('',(#718),#722);+#718 = LINE('',#719,#720);+#719 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#720 = VECTOR('',#721,1.);+#721 = DIRECTION('',(0.,-1.));+#722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#723 = ORIENTED_EDGE('',*,*,#724,.F.);+#724 = EDGE_CURVE('',#725,#697,#727,.T.);+#725 = VERTEX_POINT('',#726);+#726 = CARTESIAN_POINT('',(-2.1,2.225,0.87));+#727 = SURFACE_CURVE('',#728,(#732,#739),.PCURVE_S1.);+#728 = LINE('',#729,#730);+#729 = CARTESIAN_POINT('',(-2.1,2.225,0.87));+#730 = VECTOR('',#731,1.);+#731 = DIRECTION('',(0.,-1.,0.));+#732 = PCURVE('',#672,#733);+#733 = DEFINITIONAL_REPRESENTATION('',(#734),#738);+#734 = LINE('',#735,#736);+#735 = CARTESIAN_POINT('',(0.2,0.225));+#736 = VECTOR('',#737,1.);+#737 = DIRECTION('',(0.,-1.));+#738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#739 = PCURVE('',#740,#745);+#740 = PLANE('',#741);+#741 = AXIS2_PLACEMENT_3D('',#742,#743,#744);+#742 = CARTESIAN_POINT('',(-2.1,2.,0.87));+#743 = DIRECTION('',(0.917323062896,0.,-0.398143690493));+#744 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#745 = DEFINITIONAL_REPRESENTATION('',(#746),#750);+#746 = LINE('',#747,#748);+#747 = CARTESIAN_POINT('',(0.,0.225));+#748 = VECTOR('',#749,1.);+#749 = DIRECTION('',(-0.,-1.));+#750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#751 = ORIENTED_EDGE('',*,*,#752,.F.);+#752 = EDGE_CURVE('',#664,#725,#753,.T.);+#753 = SURFACE_CURVE('',#754,(#758,#765),.PCURVE_S1.);+#754 = LINE('',#755,#756);+#755 = CARTESIAN_POINT('',(-1.9,2.225,0.87));+#756 = VECTOR('',#757,1.);+#757 = DIRECTION('',(-1.,0.,0.));+#758 = PCURVE('',#672,#759);+#759 = DEFINITIONAL_REPRESENTATION('',(#760),#764);+#760 = LINE('',#761,#762);+#761 = CARTESIAN_POINT('',(0.,0.225));+#762 = VECTOR('',#763,1.);+#763 = DIRECTION('',(1.,0.));+#764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#765 = PCURVE('',#766,#771);+#766 = PLANE('',#767);+#767 = AXIS2_PLACEMENT_3D('',#768,#769,#770);+#768 = CARTESIAN_POINT('',(-2.38850950278,2.225,0.318416529686));+#769 = DIRECTION('',(-0.,-1.,-0.));+#770 = DIRECTION('',(0.,0.,-1.));+#771 = DEFINITIONAL_REPRESENTATION('',(#772),#776);+#772 = LINE('',#773,#774);+#773 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#774 = VECTOR('',#775,1.);+#775 = DIRECTION('',(0.,-1.));+#776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#777 = ADVANCED_FACE('',(#778),#766,.F.);+#778 = FACE_BOUND('',#779,.F.);+#779 = EDGE_LOOP('',(#780,#781,#804,#832,#860,#888,#916,#944));+#780 = ORIENTED_EDGE('',*,*,#752,.T.);+#781 = ORIENTED_EDGE('',*,*,#782,.T.);+#782 = EDGE_CURVE('',#725,#783,#785,.T.);+#783 = VERTEX_POINT('',#784);+#784 = CARTESIAN_POINT('',(-2.4125,2.225,0.15));+#785 = SURFACE_CURVE('',#786,(#790,#797),.PCURVE_S1.);+#786 = LINE('',#787,#788);+#787 = CARTESIAN_POINT('',(-2.1,2.225,0.87));+#788 = VECTOR('',#789,1.);+#789 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#790 = PCURVE('',#766,#791);+#791 = DEFINITIONAL_REPRESENTATION('',(#792),#796);+#792 = LINE('',#793,#794);+#793 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#794 = VECTOR('',#795,1.);+#795 = DIRECTION('',(0.917323062896,-0.398143690493));+#796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#797 = PCURVE('',#740,#798);+#798 = DEFINITIONAL_REPRESENTATION('',(#799),#803);+#799 = LINE('',#800,#801);+#800 = CARTESIAN_POINT('',(0.,0.225));+#801 = VECTOR('',#802,1.);+#802 = DIRECTION('',(1.,0.));+#803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#804 = ORIENTED_EDGE('',*,*,#805,.T.);+#805 = EDGE_CURVE('',#783,#806,#808,.T.);+#806 = VERTEX_POINT('',#807);+#807 = CARTESIAN_POINT('',(-3.03,2.225,0.15));+#808 = SURFACE_CURVE('',#809,(#813,#820),.PCURVE_S1.);+#809 = LINE('',#810,#811);+#810 = CARTESIAN_POINT('',(-2.4125,2.225,0.15));+#811 = VECTOR('',#812,1.);+#812 = DIRECTION('',(-1.,0.,0.));+#813 = PCURVE('',#766,#814);+#814 = DEFINITIONAL_REPRESENTATION('',(#815),#819);+#815 = LINE('',#816,#817);+#816 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#817 = VECTOR('',#818,1.);+#818 = DIRECTION('',(0.,-1.));+#819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#820 = PCURVE('',#821,#826);+#821 = PLANE('',#822);+#822 = AXIS2_PLACEMENT_3D('',#823,#824,#825);+#823 = CARTESIAN_POINT('',(-2.4125,2.,0.15));+#824 = DIRECTION('',(-0.,-0.,-1.));+#825 = DIRECTION('',(-1.,0.,0.));+#826 = DEFINITIONAL_REPRESENTATION('',(#827),#831);+#827 = LINE('',#828,#829);+#828 = CARTESIAN_POINT('',(0.,0.225));+#829 = VECTOR('',#830,1.);+#830 = DIRECTION('',(1.,0.));+#831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#832 = ORIENTED_EDGE('',*,*,#833,.T.);+#833 = EDGE_CURVE('',#806,#834,#836,.T.);+#834 = VERTEX_POINT('',#835);+#835 = CARTESIAN_POINT('',(-3.03,2.225,0.));+#836 = SURFACE_CURVE('',#837,(#841,#848),.PCURVE_S1.);+#837 = LINE('',#838,#839);+#838 = CARTESIAN_POINT('',(-3.03,2.225,0.15));+#839 = VECTOR('',#840,1.);+#840 = DIRECTION('',(0.,0.,-1.));+#841 = PCURVE('',#766,#842);+#842 = DEFINITIONAL_REPRESENTATION('',(#843),#847);+#843 = LINE('',#844,#845);+#844 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#845 = VECTOR('',#846,1.);+#846 = DIRECTION('',(1.,0.));+#847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#848 = PCURVE('',#849,#854);+#849 = PLANE('',#850);+#850 = AXIS2_PLACEMENT_3D('',#851,#852,#853);+#851 = CARTESIAN_POINT('',(-3.03,2.,0.15));+#852 = DIRECTION('',(1.,0.,0.));+#853 = DIRECTION('',(0.,0.,-1.));+#854 = DEFINITIONAL_REPRESENTATION('',(#855),#859);+#855 = LINE('',#856,#857);+#856 = CARTESIAN_POINT('',(0.,0.225));+#857 = VECTOR('',#858,1.);+#858 = DIRECTION('',(1.,0.));+#859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#860 = ORIENTED_EDGE('',*,*,#861,.T.);+#861 = EDGE_CURVE('',#834,#862,#864,.T.);+#862 = VERTEX_POINT('',#863);+#863 = CARTESIAN_POINT('',(-2.2625,2.225,0.));+#864 = SURFACE_CURVE('',#865,(#869,#876),.PCURVE_S1.);+#865 = LINE('',#866,#867);+#866 = CARTESIAN_POINT('',(-3.03,2.225,0.));+#867 = VECTOR('',#868,1.);+#868 = DIRECTION('',(1.,0.,0.));+#869 = PCURVE('',#766,#870);+#870 = DEFINITIONAL_REPRESENTATION('',(#871),#875);+#871 = LINE('',#872,#873);+#872 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#873 = VECTOR('',#874,1.);+#874 = DIRECTION('',(0.,1.));+#875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#876 = PCURVE('',#877,#882);+#877 = PLANE('',#878);+#878 = AXIS2_PLACEMENT_3D('',#879,#880,#881);+#879 = CARTESIAN_POINT('',(-3.03,2.,0.));+#880 = DIRECTION('',(0.,0.,1.));+#881 = DIRECTION('',(1.,0.,0.));+#882 = DEFINITIONAL_REPRESENTATION('',(#883),#887);+#883 = LINE('',#884,#885);+#884 = CARTESIAN_POINT('',(0.,0.225));+#885 = VECTOR('',#886,1.);+#886 = DIRECTION('',(1.,0.));+#887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#888 = ORIENTED_EDGE('',*,*,#889,.T.);+#889 = EDGE_CURVE('',#862,#890,#892,.T.);+#890 = VERTEX_POINT('',#891);+#891 = CARTESIAN_POINT('',(-1.95,2.225,0.72));+#892 = SURFACE_CURVE('',#893,(#897,#904),.PCURVE_S1.);+#893 = LINE('',#894,#895);+#894 = CARTESIAN_POINT('',(-2.2625,2.225,0.));+#895 = VECTOR('',#896,1.);+#896 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#897 = PCURVE('',#766,#898);+#898 = DEFINITIONAL_REPRESENTATION('',(#899),#903);+#899 = LINE('',#900,#901);+#900 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#901 = VECTOR('',#902,1.);+#902 = DIRECTION('',(-0.917323062896,0.398143690493));+#903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#904 = PCURVE('',#905,#910);+#905 = PLANE('',#906);+#906 = AXIS2_PLACEMENT_3D('',#907,#908,#909);+#907 = CARTESIAN_POINT('',(-2.2625,2.,0.));+#908 = DIRECTION('',(-0.917323062896,0.,0.398143690493));+#909 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#910 = DEFINITIONAL_REPRESENTATION('',(#911),#915);+#911 = LINE('',#912,#913);+#912 = CARTESIAN_POINT('',(0.,0.225));+#913 = VECTOR('',#914,1.);+#914 = DIRECTION('',(1.,0.));+#915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#916 = ORIENTED_EDGE('',*,*,#917,.T.);+#917 = EDGE_CURVE('',#890,#918,#920,.T.);+#918 = VERTEX_POINT('',#919);+#919 = CARTESIAN_POINT('',(-1.9,2.225,0.72));+#920 = SURFACE_CURVE('',#921,(#925,#932),.PCURVE_S1.);+#921 = LINE('',#922,#923);+#922 = CARTESIAN_POINT('',(-1.95,2.225,0.72));+#923 = VECTOR('',#924,1.);+#924 = DIRECTION('',(1.,0.,0.));+#925 = PCURVE('',#766,#926);+#926 = DEFINITIONAL_REPRESENTATION('',(#927),#931);+#927 = LINE('',#928,#929);+#928 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#929 = VECTOR('',#930,1.);+#930 = DIRECTION('',(0.,1.));+#931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#932 = PCURVE('',#933,#938);+#933 = PLANE('',#934);+#934 = AXIS2_PLACEMENT_3D('',#935,#936,#937);+#935 = CARTESIAN_POINT('',(-1.95,2.,0.72));+#936 = DIRECTION('',(0.,0.,1.));+#937 = DIRECTION('',(1.,0.,0.));+#938 = DEFINITIONAL_REPRESENTATION('',(#939),#943);+#939 = LINE('',#940,#941);+#940 = CARTESIAN_POINT('',(0.,0.225));+#941 = VECTOR('',#942,1.);+#942 = DIRECTION('',(1.,0.));+#943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#944 = ORIENTED_EDGE('',*,*,#945,.T.);+#945 = EDGE_CURVE('',#918,#664,#946,.T.);+#946 = SURFACE_CURVE('',#947,(#951,#958),.PCURVE_S1.);+#947 = LINE('',#948,#949);+#948 = CARTESIAN_POINT('',(-1.9,2.225,0.72));+#949 = VECTOR('',#950,1.);+#950 = DIRECTION('',(0.,0.,1.));+#951 = PCURVE('',#766,#952);+#952 = DEFINITIONAL_REPRESENTATION('',(#953),#957);+#953 = LINE('',#954,#955);+#954 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#955 = VECTOR('',#956,1.);+#956 = DIRECTION('',(-1.,0.));+#957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#958 = PCURVE('',#684,#959);+#959 = DEFINITIONAL_REPRESENTATION('',(#960),#964);+#960 = LINE('',#961,#962);+#961 = CARTESIAN_POINT('',(0.,0.225));+#962 = VECTOR('',#963,1.);+#963 = DIRECTION('',(1.,0.));+#964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#965 = ADVANCED_FACE('',(#966),#933,.F.);+#966 = FACE_BOUND('',#967,.F.);+#967 = EDGE_LOOP('',(#968,#991,#1014,#1035));+#968 = ORIENTED_EDGE('',*,*,#969,.F.);+#969 = EDGE_CURVE('',#970,#890,#972,.T.);+#970 = VERTEX_POINT('',#971);+#971 = CARTESIAN_POINT('',(-1.95,1.775,0.72));+#972 = SURFACE_CURVE('',#973,(#977,#984),.PCURVE_S1.);+#973 = LINE('',#974,#975);+#974 = CARTESIAN_POINT('',(-1.95,1.775,0.72));+#975 = VECTOR('',#976,1.);+#976 = DIRECTION('',(0.,1.,0.));+#977 = PCURVE('',#933,#978);+#978 = DEFINITIONAL_REPRESENTATION('',(#979),#983);+#979 = LINE('',#980,#981);+#980 = CARTESIAN_POINT('',(0.,-0.225));+#981 = VECTOR('',#982,1.);+#982 = DIRECTION('',(0.,1.));+#983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#984 = PCURVE('',#905,#985);+#985 = DEFINITIONAL_REPRESENTATION('',(#986),#990);+#986 = LINE('',#987,#988);+#987 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#988 = VECTOR('',#989,1.);+#989 = DIRECTION('',(0.,1.));+#990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#991 = ORIENTED_EDGE('',*,*,#992,.T.);+#992 = EDGE_CURVE('',#970,#993,#995,.T.);+#993 = VERTEX_POINT('',#994);+#994 = CARTESIAN_POINT('',(-1.9,1.775,0.72));+#995 = SURFACE_CURVE('',#996,(#1000,#1007),.PCURVE_S1.);+#996 = LINE('',#997,#998);+#997 = CARTESIAN_POINT('',(-1.95,1.775,0.72));+#998 = VECTOR('',#999,1.);+#999 = DIRECTION('',(1.,0.,0.));+#1000 = PCURVE('',#933,#1001);+#1001 = DEFINITIONAL_REPRESENTATION('',(#1002),#1006);+#1002 = LINE('',#1003,#1004);+#1003 = CARTESIAN_POINT('',(0.,-0.225));+#1004 = VECTOR('',#1005,1.);+#1005 = DIRECTION('',(1.,0.));+#1006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1007 = PCURVE('',#712,#1008);+#1008 = DEFINITIONAL_REPRESENTATION('',(#1009),#1013);+#1009 = LINE('',#1010,#1011);+#1010 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#1011 = VECTOR('',#1012,1.);+#1012 = DIRECTION('',(0.,1.));+#1013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1014 = ORIENTED_EDGE('',*,*,#1015,.T.);+#1015 = EDGE_CURVE('',#993,#918,#1016,.T.);+#1016 = SURFACE_CURVE('',#1017,(#1021,#1028),.PCURVE_S1.);+#1017 = LINE('',#1018,#1019);+#1018 = CARTESIAN_POINT('',(-1.9,1.775,0.72));+#1019 = VECTOR('',#1020,1.);+#1020 = DIRECTION('',(0.,1.,0.));+#1021 = PCURVE('',#933,#1022);+#1022 = DEFINITIONAL_REPRESENTATION('',(#1023),#1027);+#1023 = LINE('',#1024,#1025);+#1024 = CARTESIAN_POINT('',(5.E-02,-0.225));+#1025 = VECTOR('',#1026,1.);+#1026 = DIRECTION('',(0.,1.));+#1027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1028 = PCURVE('',#684,#1029);+#1029 = DEFINITIONAL_REPRESENTATION('',(#1030),#1034);+#1030 = LINE('',#1031,#1032);+#1031 = CARTESIAN_POINT('',(0.,-0.225));+#1032 = VECTOR('',#1033,1.);+#1033 = DIRECTION('',(0.,1.));+#1034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1035 = ORIENTED_EDGE('',*,*,#917,.F.);+#1036 = ADVANCED_FACE('',(#1037),#905,.F.);+#1037 = FACE_BOUND('',#1038,.F.);+#1038 = EDGE_LOOP('',(#1039,#1062,#1063,#1064));+#1039 = ORIENTED_EDGE('',*,*,#1040,.T.);+#1040 = EDGE_CURVE('',#1041,#970,#1043,.T.);+#1041 = VERTEX_POINT('',#1042);+#1042 = CARTESIAN_POINT('',(-2.2625,1.775,0.));+#1043 = SURFACE_CURVE('',#1044,(#1048,#1055),.PCURVE_S1.);+#1044 = LINE('',#1045,#1046);+#1045 = CARTESIAN_POINT('',(-2.2625,1.775,0.));+#1046 = VECTOR('',#1047,1.);+#1047 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#1048 = PCURVE('',#905,#1049);+#1049 = DEFINITIONAL_REPRESENTATION('',(#1050),#1054);+#1050 = LINE('',#1051,#1052);+#1051 = CARTESIAN_POINT('',(0.,-0.225));+#1052 = VECTOR('',#1053,1.);+#1053 = DIRECTION('',(1.,0.));+#1054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1055 = PCURVE('',#712,#1056);+#1056 = DEFINITIONAL_REPRESENTATION('',(#1057),#1061);+#1057 = LINE('',#1058,#1059);+#1058 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#1059 = VECTOR('',#1060,1.);+#1060 = DIRECTION('',(-0.917323062896,0.398143690493));+#1061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1062 = ORIENTED_EDGE('',*,*,#969,.T.);+#1063 = ORIENTED_EDGE('',*,*,#889,.F.);+#1064 = ORIENTED_EDGE('',*,*,#1065,.T.);+#1065 = EDGE_CURVE('',#862,#1041,#1066,.T.);+#1066 = SURFACE_CURVE('',#1067,(#1071,#1078),.PCURVE_S1.);+#1067 = LINE('',#1068,#1069);+#1068 = CARTESIAN_POINT('',(-2.2625,2.225,0.));+#1069 = VECTOR('',#1070,1.);+#1070 = DIRECTION('',(0.,-1.,0.));+#1071 = PCURVE('',#905,#1072);+#1072 = DEFINITIONAL_REPRESENTATION('',(#1073),#1077);+#1073 = LINE('',#1074,#1075);+#1074 = CARTESIAN_POINT('',(0.,0.225));+#1075 = VECTOR('',#1076,1.);+#1076 = DIRECTION('',(0.,-1.));+#1077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1078 = PCURVE('',#877,#1079);+#1079 = DEFINITIONAL_REPRESENTATION('',(#1080),#1084);+#1080 = LINE('',#1081,#1082);+#1081 = CARTESIAN_POINT('',(0.7675,0.225));+#1082 = VECTOR('',#1083,1.);+#1083 = DIRECTION('',(0.,-1.));+#1084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1085 = ADVANCED_FACE('',(#1086),#877,.F.);+#1086 = FACE_BOUND('',#1087,.F.);+#1087 = EDGE_LOOP('',(#1088,#1111,#1112,#1113));+#1088 = ORIENTED_EDGE('',*,*,#1089,.T.);+#1089 = EDGE_CURVE('',#1090,#1041,#1092,.T.);+#1090 = VERTEX_POINT('',#1091);+#1091 = CARTESIAN_POINT('',(-3.03,1.775,0.));+#1092 = SURFACE_CURVE('',#1093,(#1097,#1104),.PCURVE_S1.);+#1093 = LINE('',#1094,#1095);+#1094 = CARTESIAN_POINT('',(-3.03,1.775,0.));+#1095 = VECTOR('',#1096,1.);+#1096 = DIRECTION('',(1.,0.,0.));+#1097 = PCURVE('',#877,#1098);+#1098 = DEFINITIONAL_REPRESENTATION('',(#1099),#1103);+#1099 = LINE('',#1100,#1101);+#1100 = CARTESIAN_POINT('',(0.,-0.225));+#1101 = VECTOR('',#1102,1.);+#1102 = DIRECTION('',(1.,0.));+#1103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1104 = PCURVE('',#712,#1105);+#1105 = DEFINITIONAL_REPRESENTATION('',(#1106),#1110);+#1106 = LINE('',#1107,#1108);+#1107 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#1108 = VECTOR('',#1109,1.);+#1109 = DIRECTION('',(0.,1.));+#1110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1111 = ORIENTED_EDGE('',*,*,#1065,.F.);+#1112 = ORIENTED_EDGE('',*,*,#861,.F.);+#1113 = ORIENTED_EDGE('',*,*,#1114,.T.);+#1114 = EDGE_CURVE('',#834,#1090,#1115,.T.);+#1115 = SURFACE_CURVE('',#1116,(#1120,#1127),.PCURVE_S1.);+#1116 = LINE('',#1117,#1118);+#1117 = CARTESIAN_POINT('',(-3.03,2.225,0.));+#1118 = VECTOR('',#1119,1.);+#1119 = DIRECTION('',(0.,-1.,0.));+#1120 = PCURVE('',#877,#1121);+#1121 = DEFINITIONAL_REPRESENTATION('',(#1122),#1126);+#1122 = LINE('',#1123,#1124);+#1123 = CARTESIAN_POINT('',(0.,0.225));+#1124 = VECTOR('',#1125,1.);+#1125 = DIRECTION('',(0.,-1.));+#1126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1127 = PCURVE('',#849,#1128);+#1128 = DEFINITIONAL_REPRESENTATION('',(#1129),#1133);+#1129 = LINE('',#1130,#1131);+#1130 = CARTESIAN_POINT('',(0.15,0.225));+#1131 = VECTOR('',#1132,1.);+#1132 = DIRECTION('',(0.,-1.));+#1133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1134 = ADVANCED_FACE('',(#1135),#849,.F.);+#1135 = FACE_BOUND('',#1136,.F.);+#1136 = EDGE_LOOP('',(#1137,#1160,#1161,#1162));+#1137 = ORIENTED_EDGE('',*,*,#1138,.T.);+#1138 = EDGE_CURVE('',#1139,#1090,#1141,.T.);+#1139 = VERTEX_POINT('',#1140);+#1140 = CARTESIAN_POINT('',(-3.03,1.775,0.15));+#1141 = SURFACE_CURVE('',#1142,(#1146,#1153),.PCURVE_S1.);+#1142 = LINE('',#1143,#1144);+#1143 = CARTESIAN_POINT('',(-3.03,1.775,0.15));+#1144 = VECTOR('',#1145,1.);+#1145 = DIRECTION('',(0.,0.,-1.));+#1146 = PCURVE('',#849,#1147);+#1147 = DEFINITIONAL_REPRESENTATION('',(#1148),#1152);+#1148 = LINE('',#1149,#1150);+#1149 = CARTESIAN_POINT('',(0.,-0.225));+#1150 = VECTOR('',#1151,1.);+#1151 = DIRECTION('',(1.,0.));+#1152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1153 = PCURVE('',#712,#1154);+#1154 = DEFINITIONAL_REPRESENTATION('',(#1155),#1159);+#1155 = LINE('',#1156,#1157);+#1156 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#1157 = VECTOR('',#1158,1.);+#1158 = DIRECTION('',(1.,0.));+#1159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1160 = ORIENTED_EDGE('',*,*,#1114,.F.);+#1161 = ORIENTED_EDGE('',*,*,#833,.F.);+#1162 = ORIENTED_EDGE('',*,*,#1163,.T.);+#1163 = EDGE_CURVE('',#806,#1139,#1164,.T.);+#1164 = SURFACE_CURVE('',#1165,(#1169,#1176),.PCURVE_S1.);+#1165 = LINE('',#1166,#1167);+#1166 = CARTESIAN_POINT('',(-3.03,2.225,0.15));+#1167 = VECTOR('',#1168,1.);+#1168 = DIRECTION('',(0.,-1.,0.));+#1169 = PCURVE('',#849,#1170);+#1170 = DEFINITIONAL_REPRESENTATION('',(#1171),#1175);+#1171 = LINE('',#1172,#1173);+#1172 = CARTESIAN_POINT('',(0.,0.225));+#1173 = VECTOR('',#1174,1.);+#1174 = DIRECTION('',(0.,-1.));+#1175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1176 = PCURVE('',#821,#1177);+#1177 = DEFINITIONAL_REPRESENTATION('',(#1178),#1182);+#1178 = LINE('',#1179,#1180);+#1179 = CARTESIAN_POINT('',(0.6175,0.225));+#1180 = VECTOR('',#1181,1.);+#1181 = DIRECTION('',(0.,-1.));+#1182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1183 = ADVANCED_FACE('',(#1184),#821,.F.);+#1184 = FACE_BOUND('',#1185,.F.);+#1185 = EDGE_LOOP('',(#1186,#1209,#1210,#1211));+#1186 = ORIENTED_EDGE('',*,*,#1187,.T.);+#1187 = EDGE_CURVE('',#1188,#1139,#1190,.T.);+#1188 = VERTEX_POINT('',#1189);+#1189 = CARTESIAN_POINT('',(-2.4125,1.775,0.15));+#1190 = SURFACE_CURVE('',#1191,(#1195,#1202),.PCURVE_S1.);+#1191 = LINE('',#1192,#1193);+#1192 = CARTESIAN_POINT('',(-2.4125,1.775,0.15));+#1193 = VECTOR('',#1194,1.);+#1194 = DIRECTION('',(-1.,0.,0.));+#1195 = PCURVE('',#821,#1196);+#1196 = DEFINITIONAL_REPRESENTATION('',(#1197),#1201);+#1197 = LINE('',#1198,#1199);+#1198 = CARTESIAN_POINT('',(0.,-0.225));+#1199 = VECTOR('',#1200,1.);+#1200 = DIRECTION('',(1.,0.));+#1201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1202 = PCURVE('',#712,#1203);+#1203 = DEFINITIONAL_REPRESENTATION('',(#1204),#1208);+#1204 = LINE('',#1205,#1206);+#1205 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#1206 = VECTOR('',#1207,1.);+#1207 = DIRECTION('',(0.,-1.));+#1208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1209 = ORIENTED_EDGE('',*,*,#1163,.F.);+#1210 = ORIENTED_EDGE('',*,*,#805,.F.);+#1211 = ORIENTED_EDGE('',*,*,#1212,.T.);+#1212 = EDGE_CURVE('',#783,#1188,#1213,.T.);+#1213 = SURFACE_CURVE('',#1214,(#1218,#1225),.PCURVE_S1.);+#1214 = LINE('',#1215,#1216);+#1215 = CARTESIAN_POINT('',(-2.4125,2.225,0.15));+#1216 = VECTOR('',#1217,1.);+#1217 = DIRECTION('',(0.,-1.,0.));+#1218 = PCURVE('',#821,#1219);+#1219 = DEFINITIONAL_REPRESENTATION('',(#1220),#1224);+#1220 = LINE('',#1221,#1222);+#1221 = CARTESIAN_POINT('',(0.,0.225));+#1222 = VECTOR('',#1223,1.);+#1223 = DIRECTION('',(0.,-1.));+#1224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1225 = PCURVE('',#740,#1226);+#1226 = DEFINITIONAL_REPRESENTATION('',(#1227),#1231);+#1227 = LINE('',#1228,#1229);+#1228 = CARTESIAN_POINT('',(0.784892508564,0.225));+#1229 = VECTOR('',#1230,1.);+#1230 = DIRECTION('',(-0.,-1.));+#1231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1232 = ADVANCED_FACE('',(#1233),#740,.F.);+#1233 = FACE_BOUND('',#1234,.F.);+#1234 = EDGE_LOOP('',(#1235,#1256,#1257,#1258));+#1235 = ORIENTED_EDGE('',*,*,#1236,.T.);+#1236 = EDGE_CURVE('',#697,#1188,#1237,.T.);+#1237 = SURFACE_CURVE('',#1238,(#1242,#1249),.PCURVE_S1.);+#1238 = LINE('',#1239,#1240);+#1239 = CARTESIAN_POINT('',(-2.1,1.775,0.87));+#1240 = VECTOR('',#1241,1.);+#1241 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#1242 = PCURVE('',#740,#1243);+#1243 = DEFINITIONAL_REPRESENTATION('',(#1244),#1248);+#1244 = LINE('',#1245,#1246);+#1245 = CARTESIAN_POINT('',(-0.,-0.225));+#1246 = VECTOR('',#1247,1.);+#1247 = DIRECTION('',(1.,0.));+#1248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1249 = PCURVE('',#712,#1250);+#1250 = DEFINITIONAL_REPRESENTATION('',(#1251),#1255);+#1251 = LINE('',#1252,#1253);+#1252 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#1253 = VECTOR('',#1254,1.);+#1254 = DIRECTION('',(0.917323062896,-0.398143690493));+#1255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1256 = ORIENTED_EDGE('',*,*,#1212,.F.);+#1257 = ORIENTED_EDGE('',*,*,#782,.F.);+#1258 = ORIENTED_EDGE('',*,*,#724,.T.);+#1259 = ADVANCED_FACE('',(#1260),#712,.T.);+#1260 = FACE_BOUND('',#1261,.T.);+#1261 = EDGE_LOOP('',(#1262,#1263,#1264,#1265,#1266,#1267,#1268,#1269));+#1262 = ORIENTED_EDGE('',*,*,#696,.T.);+#1263 = ORIENTED_EDGE('',*,*,#1236,.T.);+#1264 = ORIENTED_EDGE('',*,*,#1187,.T.);+#1265 = ORIENTED_EDGE('',*,*,#1138,.T.);+#1266 = ORIENTED_EDGE('',*,*,#1089,.T.);+#1267 = ORIENTED_EDGE('',*,*,#1040,.T.);+#1268 = ORIENTED_EDGE('',*,*,#992,.T.);+#1269 = ORIENTED_EDGE('',*,*,#1270,.T.);+#1270 = EDGE_CURVE('',#993,#662,#1271,.T.);+#1271 = SURFACE_CURVE('',#1272,(#1276,#1283),.PCURVE_S1.);+#1272 = LINE('',#1273,#1274);+#1273 = CARTESIAN_POINT('',(-1.9,1.775,0.72));+#1274 = VECTOR('',#1275,1.);+#1275 = DIRECTION('',(0.,0.,1.));+#1276 = PCURVE('',#712,#1277);+#1277 = DEFINITIONAL_REPRESENTATION('',(#1278),#1282);+#1278 = LINE('',#1279,#1280);+#1279 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#1280 = VECTOR('',#1281,1.);+#1281 = DIRECTION('',(-1.,0.));+#1282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1283 = PCURVE('',#684,#1284);+#1284 = DEFINITIONAL_REPRESENTATION('',(#1285),#1289);+#1285 = LINE('',#1286,#1287);+#1286 = CARTESIAN_POINT('',(0.,-0.225));+#1287 = VECTOR('',#1288,1.);+#1288 = DIRECTION('',(1.,0.));+#1289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1290 = ADVANCED_FACE('',(#1291),#684,.F.);+#1291 = FACE_BOUND('',#1292,.F.);+#1292 = EDGE_LOOP('',(#1293,#1294,#1295,#1296));+#1293 = ORIENTED_EDGE('',*,*,#1015,.F.);+#1294 = ORIENTED_EDGE('',*,*,#1270,.T.);+#1295 = ORIENTED_EDGE('',*,*,#661,.T.);+#1296 = ORIENTED_EDGE('',*,*,#945,.F.);+#1297 = MANIFOLD_SOLID_BREP('',#1298);+#1298 = CLOSED_SHELL('',(#1299,#1419,#1607,#1678,#1727,#1776,#1825,#1874+ ,#1901,#1932));+#1299 = ADVANCED_FACE('',(#1300),#1314,.F.);+#1300 = FACE_BOUND('',#1301,.F.);+#1301 = EDGE_LOOP('',(#1302,#1337,#1365,#1393));+#1302 = ORIENTED_EDGE('',*,*,#1303,.F.);+#1303 = EDGE_CURVE('',#1304,#1306,#1308,.T.);+#1304 = VERTEX_POINT('',#1305);+#1305 = CARTESIAN_POINT('',(-1.9,0.775,0.87));+#1306 = VERTEX_POINT('',#1307);+#1307 = CARTESIAN_POINT('',(-1.9,1.225,0.87));+#1308 = SURFACE_CURVE('',#1309,(#1313,#1325),.PCURVE_S1.);+#1309 = LINE('',#1310,#1311);+#1310 = CARTESIAN_POINT('',(-1.9,0.775,0.87));+#1311 = VECTOR('',#1312,1.);+#1312 = DIRECTION('',(0.,1.,0.));+#1313 = PCURVE('',#1314,#1319);+#1314 = PLANE('',#1315);+#1315 = AXIS2_PLACEMENT_3D('',#1316,#1317,#1318);+#1316 = CARTESIAN_POINT('',(-1.9,1.,0.87));+#1317 = DIRECTION('',(-0.,-0.,-1.));+#1318 = DIRECTION('',(-1.,0.,0.));+#1319 = DEFINITIONAL_REPRESENTATION('',(#1320),#1324);+#1320 = LINE('',#1321,#1322);+#1321 = CARTESIAN_POINT('',(0.,-0.225));+#1322 = VECTOR('',#1323,1.);+#1323 = DIRECTION('',(0.,1.));+#1324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1325 = PCURVE('',#1326,#1331);+#1326 = PLANE('',#1327);+#1327 = AXIS2_PLACEMENT_3D('',#1328,#1329,#1330);+#1328 = CARTESIAN_POINT('',(-1.9,1.,0.72));+#1329 = DIRECTION('',(-1.,0.,0.));+#1330 = DIRECTION('',(0.,0.,1.));+#1331 = DEFINITIONAL_REPRESENTATION('',(#1332),#1336);+#1332 = LINE('',#1333,#1334);+#1333 = CARTESIAN_POINT('',(0.15,-0.225));+#1334 = VECTOR('',#1335,1.);+#1335 = DIRECTION('',(0.,1.));+#1336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1337 = ORIENTED_EDGE('',*,*,#1338,.T.);+#1338 = EDGE_CURVE('',#1304,#1339,#1341,.T.);+#1339 = VERTEX_POINT('',#1340);+#1340 = CARTESIAN_POINT('',(-2.1,0.775,0.87));+#1341 = SURFACE_CURVE('',#1342,(#1346,#1353),.PCURVE_S1.);+#1342 = LINE('',#1343,#1344);+#1343 = CARTESIAN_POINT('',(-1.9,0.775,0.87));+#1344 = VECTOR('',#1345,1.);+#1345 = DIRECTION('',(-1.,0.,0.));+#1346 = PCURVE('',#1314,#1347);+#1347 = DEFINITIONAL_REPRESENTATION('',(#1348),#1352);+#1348 = LINE('',#1349,#1350);+#1349 = CARTESIAN_POINT('',(0.,-0.225));+#1350 = VECTOR('',#1351,1.);+#1351 = DIRECTION('',(1.,0.));+#1352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1353 = PCURVE('',#1354,#1359);+#1354 = PLANE('',#1355);+#1355 = AXIS2_PLACEMENT_3D('',#1356,#1357,#1358);+#1356 = CARTESIAN_POINT('',(-2.38850950278,0.775,0.318416529686));+#1357 = DIRECTION('',(-0.,-1.,-0.));+#1358 = DIRECTION('',(0.,0.,-1.));+#1359 = DEFINITIONAL_REPRESENTATION('',(#1360),#1364);+#1360 = LINE('',#1361,#1362);+#1361 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#1362 = VECTOR('',#1363,1.);+#1363 = DIRECTION('',(0.,-1.));+#1364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1365 = ORIENTED_EDGE('',*,*,#1366,.F.);+#1366 = EDGE_CURVE('',#1367,#1339,#1369,.T.);+#1367 = VERTEX_POINT('',#1368);+#1368 = CARTESIAN_POINT('',(-2.1,1.225,0.87));+#1369 = SURFACE_CURVE('',#1370,(#1374,#1381),.PCURVE_S1.);+#1370 = LINE('',#1371,#1372);+#1371 = CARTESIAN_POINT('',(-2.1,1.225,0.87));+#1372 = VECTOR('',#1373,1.);+#1373 = DIRECTION('',(0.,-1.,0.));+#1374 = PCURVE('',#1314,#1375);+#1375 = DEFINITIONAL_REPRESENTATION('',(#1376),#1380);+#1376 = LINE('',#1377,#1378);+#1377 = CARTESIAN_POINT('',(0.2,0.225));+#1378 = VECTOR('',#1379,1.);+#1379 = DIRECTION('',(0.,-1.));+#1380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1381 = PCURVE('',#1382,#1387);+#1382 = PLANE('',#1383);+#1383 = AXIS2_PLACEMENT_3D('',#1384,#1385,#1386);+#1384 = CARTESIAN_POINT('',(-2.1,1.,0.87));+#1385 = DIRECTION('',(0.917323062896,0.,-0.398143690493));+#1386 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#1387 = DEFINITIONAL_REPRESENTATION('',(#1388),#1392);+#1388 = LINE('',#1389,#1390);+#1389 = CARTESIAN_POINT('',(0.,0.225));+#1390 = VECTOR('',#1391,1.);+#1391 = DIRECTION('',(-0.,-1.));+#1392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1393 = ORIENTED_EDGE('',*,*,#1394,.F.);+#1394 = EDGE_CURVE('',#1306,#1367,#1395,.T.);+#1395 = SURFACE_CURVE('',#1396,(#1400,#1407),.PCURVE_S1.);+#1396 = LINE('',#1397,#1398);+#1397 = CARTESIAN_POINT('',(-1.9,1.225,0.87));+#1398 = VECTOR('',#1399,1.);+#1399 = DIRECTION('',(-1.,0.,0.));+#1400 = PCURVE('',#1314,#1401);+#1401 = DEFINITIONAL_REPRESENTATION('',(#1402),#1406);+#1402 = LINE('',#1403,#1404);+#1403 = CARTESIAN_POINT('',(0.,0.225));+#1404 = VECTOR('',#1405,1.);+#1405 = DIRECTION('',(1.,0.));+#1406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1407 = PCURVE('',#1408,#1413);+#1408 = PLANE('',#1409);+#1409 = AXIS2_PLACEMENT_3D('',#1410,#1411,#1412);+#1410 = CARTESIAN_POINT('',(-2.38850950278,1.225,0.318416529686));+#1411 = DIRECTION('',(-0.,-1.,-0.));+#1412 = DIRECTION('',(0.,0.,-1.));+#1413 = DEFINITIONAL_REPRESENTATION('',(#1414),#1418);+#1414 = LINE('',#1415,#1416);+#1415 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#1416 = VECTOR('',#1417,1.);+#1417 = DIRECTION('',(0.,-1.));+#1418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1419 = ADVANCED_FACE('',(#1420),#1408,.F.);+#1420 = FACE_BOUND('',#1421,.F.);+#1421 = EDGE_LOOP('',(#1422,#1423,#1446,#1474,#1502,#1530,#1558,#1586));+#1422 = ORIENTED_EDGE('',*,*,#1394,.T.);+#1423 = ORIENTED_EDGE('',*,*,#1424,.T.);+#1424 = EDGE_CURVE('',#1367,#1425,#1427,.T.);+#1425 = VERTEX_POINT('',#1426);+#1426 = CARTESIAN_POINT('',(-2.4125,1.225,0.15));+#1427 = SURFACE_CURVE('',#1428,(#1432,#1439),.PCURVE_S1.);+#1428 = LINE('',#1429,#1430);+#1429 = CARTESIAN_POINT('',(-2.1,1.225,0.87));+#1430 = VECTOR('',#1431,1.);+#1431 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#1432 = PCURVE('',#1408,#1433);+#1433 = DEFINITIONAL_REPRESENTATION('',(#1434),#1438);+#1434 = LINE('',#1435,#1436);+#1435 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#1436 = VECTOR('',#1437,1.);+#1437 = DIRECTION('',(0.917323062896,-0.398143690493));+#1438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1439 = PCURVE('',#1382,#1440);+#1440 = DEFINITIONAL_REPRESENTATION('',(#1441),#1445);+#1441 = LINE('',#1442,#1443);+#1442 = CARTESIAN_POINT('',(0.,0.225));+#1443 = VECTOR('',#1444,1.);+#1444 = DIRECTION('',(1.,0.));+#1445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1446 = ORIENTED_EDGE('',*,*,#1447,.T.);+#1447 = EDGE_CURVE('',#1425,#1448,#1450,.T.);+#1448 = VERTEX_POINT('',#1449);+#1449 = CARTESIAN_POINT('',(-3.03,1.225,0.15));+#1450 = SURFACE_CURVE('',#1451,(#1455,#1462),.PCURVE_S1.);+#1451 = LINE('',#1452,#1453);+#1452 = CARTESIAN_POINT('',(-2.4125,1.225,0.15));+#1453 = VECTOR('',#1454,1.);+#1454 = DIRECTION('',(-1.,0.,0.));+#1455 = PCURVE('',#1408,#1456);+#1456 = DEFINITIONAL_REPRESENTATION('',(#1457),#1461);+#1457 = LINE('',#1458,#1459);+#1458 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#1459 = VECTOR('',#1460,1.);+#1460 = DIRECTION('',(0.,-1.));+#1461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1462 = PCURVE('',#1463,#1468);+#1463 = PLANE('',#1464);+#1464 = AXIS2_PLACEMENT_3D('',#1465,#1466,#1467);+#1465 = CARTESIAN_POINT('',(-2.4125,1.,0.15));+#1466 = DIRECTION('',(-0.,-0.,-1.));+#1467 = DIRECTION('',(-1.,0.,0.));+#1468 = DEFINITIONAL_REPRESENTATION('',(#1469),#1473);+#1469 = LINE('',#1470,#1471);+#1470 = CARTESIAN_POINT('',(0.,0.225));+#1471 = VECTOR('',#1472,1.);+#1472 = DIRECTION('',(1.,0.));+#1473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1474 = ORIENTED_EDGE('',*,*,#1475,.T.);+#1475 = EDGE_CURVE('',#1448,#1476,#1478,.T.);+#1476 = VERTEX_POINT('',#1477);+#1477 = CARTESIAN_POINT('',(-3.03,1.225,0.));+#1478 = SURFACE_CURVE('',#1479,(#1483,#1490),.PCURVE_S1.);+#1479 = LINE('',#1480,#1481);+#1480 = CARTESIAN_POINT('',(-3.03,1.225,0.15));+#1481 = VECTOR('',#1482,1.);+#1482 = DIRECTION('',(0.,0.,-1.));+#1483 = PCURVE('',#1408,#1484);+#1484 = DEFINITIONAL_REPRESENTATION('',(#1485),#1489);+#1485 = LINE('',#1486,#1487);+#1486 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#1487 = VECTOR('',#1488,1.);+#1488 = DIRECTION('',(1.,0.));+#1489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1490 = PCURVE('',#1491,#1496);+#1491 = PLANE('',#1492);+#1492 = AXIS2_PLACEMENT_3D('',#1493,#1494,#1495);+#1493 = CARTESIAN_POINT('',(-3.03,1.,0.15));+#1494 = DIRECTION('',(1.,0.,0.));+#1495 = DIRECTION('',(0.,0.,-1.));+#1496 = DEFINITIONAL_REPRESENTATION('',(#1497),#1501);+#1497 = LINE('',#1498,#1499);+#1498 = CARTESIAN_POINT('',(0.,0.225));+#1499 = VECTOR('',#1500,1.);+#1500 = DIRECTION('',(1.,0.));+#1501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1502 = ORIENTED_EDGE('',*,*,#1503,.T.);+#1503 = EDGE_CURVE('',#1476,#1504,#1506,.T.);+#1504 = VERTEX_POINT('',#1505);+#1505 = CARTESIAN_POINT('',(-2.2625,1.225,0.));+#1506 = SURFACE_CURVE('',#1507,(#1511,#1518),.PCURVE_S1.);+#1507 = LINE('',#1508,#1509);+#1508 = CARTESIAN_POINT('',(-3.03,1.225,0.));+#1509 = VECTOR('',#1510,1.);+#1510 = DIRECTION('',(1.,0.,0.));+#1511 = PCURVE('',#1408,#1512);+#1512 = DEFINITIONAL_REPRESENTATION('',(#1513),#1517);+#1513 = LINE('',#1514,#1515);+#1514 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#1515 = VECTOR('',#1516,1.);+#1516 = DIRECTION('',(0.,1.));+#1517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1518 = PCURVE('',#1519,#1524);+#1519 = PLANE('',#1520);+#1520 = AXIS2_PLACEMENT_3D('',#1521,#1522,#1523);+#1521 = CARTESIAN_POINT('',(-3.03,1.,0.));+#1522 = DIRECTION('',(0.,0.,1.));+#1523 = DIRECTION('',(1.,0.,0.));+#1524 = DEFINITIONAL_REPRESENTATION('',(#1525),#1529);+#1525 = LINE('',#1526,#1527);+#1526 = CARTESIAN_POINT('',(0.,0.225));+#1527 = VECTOR('',#1528,1.);+#1528 = DIRECTION('',(1.,0.));+#1529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1530 = ORIENTED_EDGE('',*,*,#1531,.T.);+#1531 = EDGE_CURVE('',#1504,#1532,#1534,.T.);+#1532 = VERTEX_POINT('',#1533);+#1533 = CARTESIAN_POINT('',(-1.95,1.225,0.72));+#1534 = SURFACE_CURVE('',#1535,(#1539,#1546),.PCURVE_S1.);+#1535 = LINE('',#1536,#1537);+#1536 = CARTESIAN_POINT('',(-2.2625,1.225,0.));+#1537 = VECTOR('',#1538,1.);+#1538 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#1539 = PCURVE('',#1408,#1540);+#1540 = DEFINITIONAL_REPRESENTATION('',(#1541),#1545);+#1541 = LINE('',#1542,#1543);+#1542 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#1543 = VECTOR('',#1544,1.);+#1544 = DIRECTION('',(-0.917323062896,0.398143690493));+#1545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1546 = PCURVE('',#1547,#1552);+#1547 = PLANE('',#1548);+#1548 = AXIS2_PLACEMENT_3D('',#1549,#1550,#1551);+#1549 = CARTESIAN_POINT('',(-2.2625,1.,0.));+#1550 = DIRECTION('',(-0.917323062896,0.,0.398143690493));+#1551 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#1552 = DEFINITIONAL_REPRESENTATION('',(#1553),#1557);+#1553 = LINE('',#1554,#1555);+#1554 = CARTESIAN_POINT('',(0.,0.225));+#1555 = VECTOR('',#1556,1.);+#1556 = DIRECTION('',(1.,0.));+#1557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1558 = ORIENTED_EDGE('',*,*,#1559,.T.);+#1559 = EDGE_CURVE('',#1532,#1560,#1562,.T.);+#1560 = VERTEX_POINT('',#1561);+#1561 = CARTESIAN_POINT('',(-1.9,1.225,0.72));+#1562 = SURFACE_CURVE('',#1563,(#1567,#1574),.PCURVE_S1.);+#1563 = LINE('',#1564,#1565);+#1564 = CARTESIAN_POINT('',(-1.95,1.225,0.72));+#1565 = VECTOR('',#1566,1.);+#1566 = DIRECTION('',(1.,0.,0.));+#1567 = PCURVE('',#1408,#1568);+#1568 = DEFINITIONAL_REPRESENTATION('',(#1569),#1573);+#1569 = LINE('',#1570,#1571);+#1570 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#1571 = VECTOR('',#1572,1.);+#1572 = DIRECTION('',(0.,1.));+#1573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1574 = PCURVE('',#1575,#1580);+#1575 = PLANE('',#1576);+#1576 = AXIS2_PLACEMENT_3D('',#1577,#1578,#1579);+#1577 = CARTESIAN_POINT('',(-1.95,1.,0.72));+#1578 = DIRECTION('',(0.,0.,1.));+#1579 = DIRECTION('',(1.,0.,0.));+#1580 = DEFINITIONAL_REPRESENTATION('',(#1581),#1585);+#1581 = LINE('',#1582,#1583);+#1582 = CARTESIAN_POINT('',(0.,0.225));+#1583 = VECTOR('',#1584,1.);+#1584 = DIRECTION('',(1.,0.));+#1585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1586 = ORIENTED_EDGE('',*,*,#1587,.T.);+#1587 = EDGE_CURVE('',#1560,#1306,#1588,.T.);+#1588 = SURFACE_CURVE('',#1589,(#1593,#1600),.PCURVE_S1.);+#1589 = LINE('',#1590,#1591);+#1590 = CARTESIAN_POINT('',(-1.9,1.225,0.72));+#1591 = VECTOR('',#1592,1.);+#1592 = DIRECTION('',(0.,0.,1.));+#1593 = PCURVE('',#1408,#1594);+#1594 = DEFINITIONAL_REPRESENTATION('',(#1595),#1599);+#1595 = LINE('',#1596,#1597);+#1596 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#1597 = VECTOR('',#1598,1.);+#1598 = DIRECTION('',(-1.,0.));+#1599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1600 = PCURVE('',#1326,#1601);+#1601 = DEFINITIONAL_REPRESENTATION('',(#1602),#1606);+#1602 = LINE('',#1603,#1604);+#1603 = CARTESIAN_POINT('',(0.,0.225));+#1604 = VECTOR('',#1605,1.);+#1605 = DIRECTION('',(1.,0.));+#1606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1607 = ADVANCED_FACE('',(#1608),#1575,.F.);+#1608 = FACE_BOUND('',#1609,.F.);+#1609 = EDGE_LOOP('',(#1610,#1633,#1656,#1677));+#1610 = ORIENTED_EDGE('',*,*,#1611,.F.);+#1611 = EDGE_CURVE('',#1612,#1532,#1614,.T.);+#1612 = VERTEX_POINT('',#1613);+#1613 = CARTESIAN_POINT('',(-1.95,0.775,0.72));+#1614 = SURFACE_CURVE('',#1615,(#1619,#1626),.PCURVE_S1.);+#1615 = LINE('',#1616,#1617);+#1616 = CARTESIAN_POINT('',(-1.95,0.775,0.72));+#1617 = VECTOR('',#1618,1.);+#1618 = DIRECTION('',(0.,1.,0.));+#1619 = PCURVE('',#1575,#1620);+#1620 = DEFINITIONAL_REPRESENTATION('',(#1621),#1625);+#1621 = LINE('',#1622,#1623);+#1622 = CARTESIAN_POINT('',(0.,-0.225));+#1623 = VECTOR('',#1624,1.);+#1624 = DIRECTION('',(0.,1.));+#1625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1626 = PCURVE('',#1547,#1627);+#1627 = DEFINITIONAL_REPRESENTATION('',(#1628),#1632);+#1628 = LINE('',#1629,#1630);+#1629 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#1630 = VECTOR('',#1631,1.);+#1631 = DIRECTION('',(0.,1.));+#1632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1633 = ORIENTED_EDGE('',*,*,#1634,.T.);+#1634 = EDGE_CURVE('',#1612,#1635,#1637,.T.);+#1635 = VERTEX_POINT('',#1636);+#1636 = CARTESIAN_POINT('',(-1.9,0.775,0.72));+#1637 = SURFACE_CURVE('',#1638,(#1642,#1649),.PCURVE_S1.);+#1638 = LINE('',#1639,#1640);+#1639 = CARTESIAN_POINT('',(-1.95,0.775,0.72));+#1640 = VECTOR('',#1641,1.);+#1641 = DIRECTION('',(1.,0.,0.));+#1642 = PCURVE('',#1575,#1643);+#1643 = DEFINITIONAL_REPRESENTATION('',(#1644),#1648);+#1644 = LINE('',#1645,#1646);+#1645 = CARTESIAN_POINT('',(0.,-0.225));+#1646 = VECTOR('',#1647,1.);+#1647 = DIRECTION('',(1.,0.));+#1648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1649 = PCURVE('',#1354,#1650);+#1650 = DEFINITIONAL_REPRESENTATION('',(#1651),#1655);+#1651 = LINE('',#1652,#1653);+#1652 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#1653 = VECTOR('',#1654,1.);+#1654 = DIRECTION('',(0.,1.));+#1655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1656 = ORIENTED_EDGE('',*,*,#1657,.T.);+#1657 = EDGE_CURVE('',#1635,#1560,#1658,.T.);+#1658 = SURFACE_CURVE('',#1659,(#1663,#1670),.PCURVE_S1.);+#1659 = LINE('',#1660,#1661);+#1660 = CARTESIAN_POINT('',(-1.9,0.775,0.72));+#1661 = VECTOR('',#1662,1.);+#1662 = DIRECTION('',(0.,1.,0.));+#1663 = PCURVE('',#1575,#1664);+#1664 = DEFINITIONAL_REPRESENTATION('',(#1665),#1669);+#1665 = LINE('',#1666,#1667);+#1666 = CARTESIAN_POINT('',(5.E-02,-0.225));+#1667 = VECTOR('',#1668,1.);+#1668 = DIRECTION('',(0.,1.));+#1669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1670 = PCURVE('',#1326,#1671);+#1671 = DEFINITIONAL_REPRESENTATION('',(#1672),#1676);+#1672 = LINE('',#1673,#1674);+#1673 = CARTESIAN_POINT('',(0.,-0.225));+#1674 = VECTOR('',#1675,1.);+#1675 = DIRECTION('',(0.,1.));+#1676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1677 = ORIENTED_EDGE('',*,*,#1559,.F.);+#1678 = ADVANCED_FACE('',(#1679),#1547,.F.);+#1679 = FACE_BOUND('',#1680,.F.);+#1680 = EDGE_LOOP('',(#1681,#1704,#1705,#1706));+#1681 = ORIENTED_EDGE('',*,*,#1682,.T.);+#1682 = EDGE_CURVE('',#1683,#1612,#1685,.T.);+#1683 = VERTEX_POINT('',#1684);+#1684 = CARTESIAN_POINT('',(-2.2625,0.775,0.));+#1685 = SURFACE_CURVE('',#1686,(#1690,#1697),.PCURVE_S1.);+#1686 = LINE('',#1687,#1688);+#1687 = CARTESIAN_POINT('',(-2.2625,0.775,0.));+#1688 = VECTOR('',#1689,1.);+#1689 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#1690 = PCURVE('',#1547,#1691);+#1691 = DEFINITIONAL_REPRESENTATION('',(#1692),#1696);+#1692 = LINE('',#1693,#1694);+#1693 = CARTESIAN_POINT('',(0.,-0.225));+#1694 = VECTOR('',#1695,1.);+#1695 = DIRECTION('',(1.,0.));+#1696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1697 = PCURVE('',#1354,#1698);+#1698 = DEFINITIONAL_REPRESENTATION('',(#1699),#1703);+#1699 = LINE('',#1700,#1701);+#1700 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#1701 = VECTOR('',#1702,1.);+#1702 = DIRECTION('',(-0.917323062896,0.398143690493));+#1703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1704 = ORIENTED_EDGE('',*,*,#1611,.T.);+#1705 = ORIENTED_EDGE('',*,*,#1531,.F.);+#1706 = ORIENTED_EDGE('',*,*,#1707,.T.);+#1707 = EDGE_CURVE('',#1504,#1683,#1708,.T.);+#1708 = SURFACE_CURVE('',#1709,(#1713,#1720),.PCURVE_S1.);+#1709 = LINE('',#1710,#1711);+#1710 = CARTESIAN_POINT('',(-2.2625,1.225,0.));+#1711 = VECTOR('',#1712,1.);+#1712 = DIRECTION('',(0.,-1.,0.));+#1713 = PCURVE('',#1547,#1714);+#1714 = DEFINITIONAL_REPRESENTATION('',(#1715),#1719);+#1715 = LINE('',#1716,#1717);+#1716 = CARTESIAN_POINT('',(0.,0.225));+#1717 = VECTOR('',#1718,1.);+#1718 = DIRECTION('',(0.,-1.));+#1719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1720 = PCURVE('',#1519,#1721);+#1721 = DEFINITIONAL_REPRESENTATION('',(#1722),#1726);+#1722 = LINE('',#1723,#1724);+#1723 = CARTESIAN_POINT('',(0.7675,0.225));+#1724 = VECTOR('',#1725,1.);+#1725 = DIRECTION('',(0.,-1.));+#1726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1727 = ADVANCED_FACE('',(#1728),#1519,.F.);+#1728 = FACE_BOUND('',#1729,.F.);+#1729 = EDGE_LOOP('',(#1730,#1753,#1754,#1755));+#1730 = ORIENTED_EDGE('',*,*,#1731,.T.);+#1731 = EDGE_CURVE('',#1732,#1683,#1734,.T.);+#1732 = VERTEX_POINT('',#1733);+#1733 = CARTESIAN_POINT('',(-3.03,0.775,0.));+#1734 = SURFACE_CURVE('',#1735,(#1739,#1746),.PCURVE_S1.);+#1735 = LINE('',#1736,#1737);+#1736 = CARTESIAN_POINT('',(-3.03,0.775,0.));+#1737 = VECTOR('',#1738,1.);+#1738 = DIRECTION('',(1.,0.,0.));+#1739 = PCURVE('',#1519,#1740);+#1740 = DEFINITIONAL_REPRESENTATION('',(#1741),#1745);+#1741 = LINE('',#1742,#1743);+#1742 = CARTESIAN_POINT('',(0.,-0.225));+#1743 = VECTOR('',#1744,1.);+#1744 = DIRECTION('',(1.,0.));+#1745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1746 = PCURVE('',#1354,#1747);+#1747 = DEFINITIONAL_REPRESENTATION('',(#1748),#1752);+#1748 = LINE('',#1749,#1750);+#1749 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#1750 = VECTOR('',#1751,1.);+#1751 = DIRECTION('',(0.,1.));+#1752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1753 = ORIENTED_EDGE('',*,*,#1707,.F.);+#1754 = ORIENTED_EDGE('',*,*,#1503,.F.);+#1755 = ORIENTED_EDGE('',*,*,#1756,.T.);+#1756 = EDGE_CURVE('',#1476,#1732,#1757,.T.);+#1757 = SURFACE_CURVE('',#1758,(#1762,#1769),.PCURVE_S1.);+#1758 = LINE('',#1759,#1760);+#1759 = CARTESIAN_POINT('',(-3.03,1.225,0.));+#1760 = VECTOR('',#1761,1.);+#1761 = DIRECTION('',(0.,-1.,0.));+#1762 = PCURVE('',#1519,#1763);+#1763 = DEFINITIONAL_REPRESENTATION('',(#1764),#1768);+#1764 = LINE('',#1765,#1766);+#1765 = CARTESIAN_POINT('',(0.,0.225));+#1766 = VECTOR('',#1767,1.);+#1767 = DIRECTION('',(0.,-1.));+#1768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1769 = PCURVE('',#1491,#1770);+#1770 = DEFINITIONAL_REPRESENTATION('',(#1771),#1775);+#1771 = LINE('',#1772,#1773);+#1772 = CARTESIAN_POINT('',(0.15,0.225));+#1773 = VECTOR('',#1774,1.);+#1774 = DIRECTION('',(0.,-1.));+#1775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1776 = ADVANCED_FACE('',(#1777),#1491,.F.);+#1777 = FACE_BOUND('',#1778,.F.);+#1778 = EDGE_LOOP('',(#1779,#1802,#1803,#1804));+#1779 = ORIENTED_EDGE('',*,*,#1780,.T.);+#1780 = EDGE_CURVE('',#1781,#1732,#1783,.T.);+#1781 = VERTEX_POINT('',#1782);+#1782 = CARTESIAN_POINT('',(-3.03,0.775,0.15));+#1783 = SURFACE_CURVE('',#1784,(#1788,#1795),.PCURVE_S1.);+#1784 = LINE('',#1785,#1786);+#1785 = CARTESIAN_POINT('',(-3.03,0.775,0.15));+#1786 = VECTOR('',#1787,1.);+#1787 = DIRECTION('',(0.,0.,-1.));+#1788 = PCURVE('',#1491,#1789);+#1789 = DEFINITIONAL_REPRESENTATION('',(#1790),#1794);+#1790 = LINE('',#1791,#1792);+#1791 = CARTESIAN_POINT('',(0.,-0.225));+#1792 = VECTOR('',#1793,1.);+#1793 = DIRECTION('',(1.,0.));+#1794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1795 = PCURVE('',#1354,#1796);+#1796 = DEFINITIONAL_REPRESENTATION('',(#1797),#1801);+#1797 = LINE('',#1798,#1799);+#1798 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#1799 = VECTOR('',#1800,1.);+#1800 = DIRECTION('',(1.,0.));+#1801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1802 = ORIENTED_EDGE('',*,*,#1756,.F.);+#1803 = ORIENTED_EDGE('',*,*,#1475,.F.);+#1804 = ORIENTED_EDGE('',*,*,#1805,.T.);+#1805 = EDGE_CURVE('',#1448,#1781,#1806,.T.);+#1806 = SURFACE_CURVE('',#1807,(#1811,#1818),.PCURVE_S1.);+#1807 = LINE('',#1808,#1809);+#1808 = CARTESIAN_POINT('',(-3.03,1.225,0.15));+#1809 = VECTOR('',#1810,1.);+#1810 = DIRECTION('',(0.,-1.,0.));+#1811 = PCURVE('',#1491,#1812);+#1812 = DEFINITIONAL_REPRESENTATION('',(#1813),#1817);+#1813 = LINE('',#1814,#1815);+#1814 = CARTESIAN_POINT('',(0.,0.225));+#1815 = VECTOR('',#1816,1.);+#1816 = DIRECTION('',(0.,-1.));+#1817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1818 = PCURVE('',#1463,#1819);+#1819 = DEFINITIONAL_REPRESENTATION('',(#1820),#1824);+#1820 = LINE('',#1821,#1822);+#1821 = CARTESIAN_POINT('',(0.6175,0.225));+#1822 = VECTOR('',#1823,1.);+#1823 = DIRECTION('',(0.,-1.));+#1824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1825 = ADVANCED_FACE('',(#1826),#1463,.F.);+#1826 = FACE_BOUND('',#1827,.F.);+#1827 = EDGE_LOOP('',(#1828,#1851,#1852,#1853));+#1828 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1829 = EDGE_CURVE('',#1830,#1781,#1832,.T.);+#1830 = VERTEX_POINT('',#1831);+#1831 = CARTESIAN_POINT('',(-2.4125,0.775,0.15));+#1832 = SURFACE_CURVE('',#1833,(#1837,#1844),.PCURVE_S1.);+#1833 = LINE('',#1834,#1835);+#1834 = CARTESIAN_POINT('',(-2.4125,0.775,0.15));+#1835 = VECTOR('',#1836,1.);+#1836 = DIRECTION('',(-1.,0.,0.));+#1837 = PCURVE('',#1463,#1838);+#1838 = DEFINITIONAL_REPRESENTATION('',(#1839),#1843);+#1839 = LINE('',#1840,#1841);+#1840 = CARTESIAN_POINT('',(0.,-0.225));+#1841 = VECTOR('',#1842,1.);+#1842 = DIRECTION('',(1.,0.));+#1843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1844 = PCURVE('',#1354,#1845);+#1845 = DEFINITIONAL_REPRESENTATION('',(#1846),#1850);+#1846 = LINE('',#1847,#1848);+#1847 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#1848 = VECTOR('',#1849,1.);+#1849 = DIRECTION('',(0.,-1.));+#1850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1851 = ORIENTED_EDGE('',*,*,#1805,.F.);+#1852 = ORIENTED_EDGE('',*,*,#1447,.F.);+#1853 = ORIENTED_EDGE('',*,*,#1854,.T.);+#1854 = EDGE_CURVE('',#1425,#1830,#1855,.T.);+#1855 = SURFACE_CURVE('',#1856,(#1860,#1867),.PCURVE_S1.);+#1856 = LINE('',#1857,#1858);+#1857 = CARTESIAN_POINT('',(-2.4125,1.225,0.15));+#1858 = VECTOR('',#1859,1.);+#1859 = DIRECTION('',(0.,-1.,0.));+#1860 = PCURVE('',#1463,#1861);+#1861 = DEFINITIONAL_REPRESENTATION('',(#1862),#1866);+#1862 = LINE('',#1863,#1864);+#1863 = CARTESIAN_POINT('',(0.,0.225));+#1864 = VECTOR('',#1865,1.);+#1865 = DIRECTION('',(0.,-1.));+#1866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1867 = PCURVE('',#1382,#1868);+#1868 = DEFINITIONAL_REPRESENTATION('',(#1869),#1873);+#1869 = LINE('',#1870,#1871);+#1870 = CARTESIAN_POINT('',(0.784892508564,0.225));+#1871 = VECTOR('',#1872,1.);+#1872 = DIRECTION('',(-0.,-1.));+#1873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1874 = ADVANCED_FACE('',(#1875),#1382,.F.);+#1875 = FACE_BOUND('',#1876,.F.);+#1876 = EDGE_LOOP('',(#1877,#1898,#1899,#1900));+#1877 = ORIENTED_EDGE('',*,*,#1878,.T.);+#1878 = EDGE_CURVE('',#1339,#1830,#1879,.T.);+#1879 = SURFACE_CURVE('',#1880,(#1884,#1891),.PCURVE_S1.);+#1880 = LINE('',#1881,#1882);+#1881 = CARTESIAN_POINT('',(-2.1,0.775,0.87));+#1882 = VECTOR('',#1883,1.);+#1883 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#1884 = PCURVE('',#1382,#1885);+#1885 = DEFINITIONAL_REPRESENTATION('',(#1886),#1890);+#1886 = LINE('',#1887,#1888);+#1887 = CARTESIAN_POINT('',(-0.,-0.225));+#1888 = VECTOR('',#1889,1.);+#1889 = DIRECTION('',(1.,0.));+#1890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1891 = PCURVE('',#1354,#1892);+#1892 = DEFINITIONAL_REPRESENTATION('',(#1893),#1897);+#1893 = LINE('',#1894,#1895);+#1894 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#1895 = VECTOR('',#1896,1.);+#1896 = DIRECTION('',(0.917323062896,-0.398143690493));+#1897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1898 = ORIENTED_EDGE('',*,*,#1854,.F.);+#1899 = ORIENTED_EDGE('',*,*,#1424,.F.);+#1900 = ORIENTED_EDGE('',*,*,#1366,.T.);+#1901 = ADVANCED_FACE('',(#1902),#1354,.T.);+#1902 = FACE_BOUND('',#1903,.T.);+#1903 = EDGE_LOOP('',(#1904,#1905,#1906,#1907,#1908,#1909,#1910,#1911));+#1904 = ORIENTED_EDGE('',*,*,#1338,.T.);+#1905 = ORIENTED_EDGE('',*,*,#1878,.T.);+#1906 = ORIENTED_EDGE('',*,*,#1829,.T.);+#1907 = ORIENTED_EDGE('',*,*,#1780,.T.);+#1908 = ORIENTED_EDGE('',*,*,#1731,.T.);+#1909 = ORIENTED_EDGE('',*,*,#1682,.T.);+#1910 = ORIENTED_EDGE('',*,*,#1634,.T.);+#1911 = ORIENTED_EDGE('',*,*,#1912,.T.);+#1912 = EDGE_CURVE('',#1635,#1304,#1913,.T.);+#1913 = SURFACE_CURVE('',#1914,(#1918,#1925),.PCURVE_S1.);+#1914 = LINE('',#1915,#1916);+#1915 = CARTESIAN_POINT('',(-1.9,0.775,0.72));+#1916 = VECTOR('',#1917,1.);+#1917 = DIRECTION('',(0.,0.,1.));+#1918 = PCURVE('',#1354,#1919);+#1919 = DEFINITIONAL_REPRESENTATION('',(#1920),#1924);+#1920 = LINE('',#1921,#1922);+#1921 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#1922 = VECTOR('',#1923,1.);+#1923 = DIRECTION('',(-1.,0.));+#1924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1925 = PCURVE('',#1326,#1926);+#1926 = DEFINITIONAL_REPRESENTATION('',(#1927),#1931);+#1927 = LINE('',#1928,#1929);+#1928 = CARTESIAN_POINT('',(0.,-0.225));+#1929 = VECTOR('',#1930,1.);+#1930 = DIRECTION('',(1.,0.));+#1931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1932 = ADVANCED_FACE('',(#1933),#1326,.F.);+#1933 = FACE_BOUND('',#1934,.F.);+#1934 = EDGE_LOOP('',(#1935,#1936,#1937,#1938));+#1935 = ORIENTED_EDGE('',*,*,#1657,.F.);+#1936 = ORIENTED_EDGE('',*,*,#1912,.T.);+#1937 = ORIENTED_EDGE('',*,*,#1303,.T.);+#1938 = ORIENTED_EDGE('',*,*,#1587,.F.);+#1939 = MANIFOLD_SOLID_BREP('',#1940);+#1940 = CLOSED_SHELL('',(#1941,#2061,#2249,#2320,#2369,#2418,#2467,#2516+ ,#2543,#2574));+#1941 = ADVANCED_FACE('',(#1942),#1956,.F.);+#1942 = FACE_BOUND('',#1943,.F.);+#1943 = EDGE_LOOP('',(#1944,#1979,#2007,#2035));+#1944 = ORIENTED_EDGE('',*,*,#1945,.F.);+#1945 = EDGE_CURVE('',#1946,#1948,#1950,.T.);+#1946 = VERTEX_POINT('',#1947);+#1947 = CARTESIAN_POINT('',(-1.9,-0.225,0.87));+#1948 = VERTEX_POINT('',#1949);+#1949 = CARTESIAN_POINT('',(-1.9,0.225,0.87));+#1950 = SURFACE_CURVE('',#1951,(#1955,#1967),.PCURVE_S1.);+#1951 = LINE('',#1952,#1953);+#1952 = CARTESIAN_POINT('',(-1.9,-0.225,0.87));+#1953 = VECTOR('',#1954,1.);+#1954 = DIRECTION('',(0.,1.,0.));+#1955 = PCURVE('',#1956,#1961);+#1956 = PLANE('',#1957);+#1957 = AXIS2_PLACEMENT_3D('',#1958,#1959,#1960);+#1958 = CARTESIAN_POINT('',(-1.9,0.,0.87));+#1959 = DIRECTION('',(-0.,-0.,-1.));+#1960 = DIRECTION('',(-1.,0.,0.));+#1961 = DEFINITIONAL_REPRESENTATION('',(#1962),#1966);+#1962 = LINE('',#1963,#1964);+#1963 = CARTESIAN_POINT('',(0.,-0.225));+#1964 = VECTOR('',#1965,1.);+#1965 = DIRECTION('',(0.,1.));+#1966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1967 = PCURVE('',#1968,#1973);+#1968 = PLANE('',#1969);+#1969 = AXIS2_PLACEMENT_3D('',#1970,#1971,#1972);+#1970 = CARTESIAN_POINT('',(-1.9,0.,0.72));+#1971 = DIRECTION('',(-1.,0.,0.));+#1972 = DIRECTION('',(0.,0.,1.));+#1973 = DEFINITIONAL_REPRESENTATION('',(#1974),#1978);+#1974 = LINE('',#1975,#1976);+#1975 = CARTESIAN_POINT('',(0.15,-0.225));+#1976 = VECTOR('',#1977,1.);+#1977 = DIRECTION('',(0.,1.));+#1978 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1979 = ORIENTED_EDGE('',*,*,#1980,.T.);+#1980 = EDGE_CURVE('',#1946,#1981,#1983,.T.);+#1981 = VERTEX_POINT('',#1982);+#1982 = CARTESIAN_POINT('',(-2.1,-0.225,0.87));+#1983 = SURFACE_CURVE('',#1984,(#1988,#1995),.PCURVE_S1.);+#1984 = LINE('',#1985,#1986);+#1985 = CARTESIAN_POINT('',(-1.9,-0.225,0.87));+#1986 = VECTOR('',#1987,1.);+#1987 = DIRECTION('',(-1.,0.,0.));+#1988 = PCURVE('',#1956,#1989);+#1989 = DEFINITIONAL_REPRESENTATION('',(#1990),#1994);+#1990 = LINE('',#1991,#1992);+#1991 = CARTESIAN_POINT('',(0.,-0.225));+#1992 = VECTOR('',#1993,1.);+#1993 = DIRECTION('',(1.,0.));+#1994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#1995 = PCURVE('',#1996,#2001);+#1996 = PLANE('',#1997);+#1997 = AXIS2_PLACEMENT_3D('',#1998,#1999,#2000);+#1998 = CARTESIAN_POINT('',(-2.38850950278,-0.225,0.318416529686));+#1999 = DIRECTION('',(-0.,-1.,-0.));+#2000 = DIRECTION('',(0.,0.,-1.));+#2001 = DEFINITIONAL_REPRESENTATION('',(#2002),#2006);+#2002 = LINE('',#2003,#2004);+#2003 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#2004 = VECTOR('',#2005,1.);+#2005 = DIRECTION('',(0.,-1.));+#2006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2007 = ORIENTED_EDGE('',*,*,#2008,.F.);+#2008 = EDGE_CURVE('',#2009,#1981,#2011,.T.);+#2009 = VERTEX_POINT('',#2010);+#2010 = CARTESIAN_POINT('',(-2.1,0.225,0.87));+#2011 = SURFACE_CURVE('',#2012,(#2016,#2023),.PCURVE_S1.);+#2012 = LINE('',#2013,#2014);+#2013 = CARTESIAN_POINT('',(-2.1,0.225,0.87));+#2014 = VECTOR('',#2015,1.);+#2015 = DIRECTION('',(0.,-1.,0.));+#2016 = PCURVE('',#1956,#2017);+#2017 = DEFINITIONAL_REPRESENTATION('',(#2018),#2022);+#2018 = LINE('',#2019,#2020);+#2019 = CARTESIAN_POINT('',(0.2,0.225));+#2020 = VECTOR('',#2021,1.);+#2021 = DIRECTION('',(0.,-1.));+#2022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2023 = PCURVE('',#2024,#2029);+#2024 = PLANE('',#2025);+#2025 = AXIS2_PLACEMENT_3D('',#2026,#2027,#2028);+#2026 = CARTESIAN_POINT('',(-2.1,0.,0.87));+#2027 = DIRECTION('',(0.917323062896,0.,-0.398143690493));+#2028 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#2029 = DEFINITIONAL_REPRESENTATION('',(#2030),#2034);+#2030 = LINE('',#2031,#2032);+#2031 = CARTESIAN_POINT('',(0.,0.225));+#2032 = VECTOR('',#2033,1.);+#2033 = DIRECTION('',(-0.,-1.));+#2034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2035 = ORIENTED_EDGE('',*,*,#2036,.F.);+#2036 = EDGE_CURVE('',#1948,#2009,#2037,.T.);+#2037 = SURFACE_CURVE('',#2038,(#2042,#2049),.PCURVE_S1.);+#2038 = LINE('',#2039,#2040);+#2039 = CARTESIAN_POINT('',(-1.9,0.225,0.87));+#2040 = VECTOR('',#2041,1.);+#2041 = DIRECTION('',(-1.,0.,0.));+#2042 = PCURVE('',#1956,#2043);+#2043 = DEFINITIONAL_REPRESENTATION('',(#2044),#2048);+#2044 = LINE('',#2045,#2046);+#2045 = CARTESIAN_POINT('',(0.,0.225));+#2046 = VECTOR('',#2047,1.);+#2047 = DIRECTION('',(1.,0.));+#2048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2049 = PCURVE('',#2050,#2055);+#2050 = PLANE('',#2051);+#2051 = AXIS2_PLACEMENT_3D('',#2052,#2053,#2054);+#2052 = CARTESIAN_POINT('',(-2.38850950278,0.225,0.318416529686));+#2053 = DIRECTION('',(-0.,-1.,-0.));+#2054 = DIRECTION('',(0.,0.,-1.));+#2055 = DEFINITIONAL_REPRESENTATION('',(#2056),#2060);+#2056 = LINE('',#2057,#2058);+#2057 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#2058 = VECTOR('',#2059,1.);+#2059 = DIRECTION('',(0.,-1.));+#2060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2061 = ADVANCED_FACE('',(#2062),#2050,.F.);+#2062 = FACE_BOUND('',#2063,.F.);+#2063 = EDGE_LOOP('',(#2064,#2065,#2088,#2116,#2144,#2172,#2200,#2228));+#2064 = ORIENTED_EDGE('',*,*,#2036,.T.);+#2065 = ORIENTED_EDGE('',*,*,#2066,.T.);+#2066 = EDGE_CURVE('',#2009,#2067,#2069,.T.);+#2067 = VERTEX_POINT('',#2068);+#2068 = CARTESIAN_POINT('',(-2.4125,0.225,0.15));+#2069 = SURFACE_CURVE('',#2070,(#2074,#2081),.PCURVE_S1.);+#2070 = LINE('',#2071,#2072);+#2071 = CARTESIAN_POINT('',(-2.1,0.225,0.87));+#2072 = VECTOR('',#2073,1.);+#2073 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#2074 = PCURVE('',#2050,#2075);+#2075 = DEFINITIONAL_REPRESENTATION('',(#2076),#2080);+#2076 = LINE('',#2077,#2078);+#2077 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#2078 = VECTOR('',#2079,1.);+#2079 = DIRECTION('',(0.917323062896,-0.398143690493));+#2080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2081 = PCURVE('',#2024,#2082);+#2082 = DEFINITIONAL_REPRESENTATION('',(#2083),#2087);+#2083 = LINE('',#2084,#2085);+#2084 = CARTESIAN_POINT('',(0.,0.225));+#2085 = VECTOR('',#2086,1.);+#2086 = DIRECTION('',(1.,0.));+#2087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2088 = ORIENTED_EDGE('',*,*,#2089,.T.);+#2089 = EDGE_CURVE('',#2067,#2090,#2092,.T.);+#2090 = VERTEX_POINT('',#2091);+#2091 = CARTESIAN_POINT('',(-3.03,0.225,0.15));+#2092 = SURFACE_CURVE('',#2093,(#2097,#2104),.PCURVE_S1.);+#2093 = LINE('',#2094,#2095);+#2094 = CARTESIAN_POINT('',(-2.4125,0.225,0.15));+#2095 = VECTOR('',#2096,1.);+#2096 = DIRECTION('',(-1.,0.,0.));+#2097 = PCURVE('',#2050,#2098);+#2098 = DEFINITIONAL_REPRESENTATION('',(#2099),#2103);+#2099 = LINE('',#2100,#2101);+#2100 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#2101 = VECTOR('',#2102,1.);+#2102 = DIRECTION('',(0.,-1.));+#2103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2104 = PCURVE('',#2105,#2110);+#2105 = PLANE('',#2106);+#2106 = AXIS2_PLACEMENT_3D('',#2107,#2108,#2109);+#2107 = CARTESIAN_POINT('',(-2.4125,0.,0.15));+#2108 = DIRECTION('',(-0.,-0.,-1.));+#2109 = DIRECTION('',(-1.,0.,0.));+#2110 = DEFINITIONAL_REPRESENTATION('',(#2111),#2115);+#2111 = LINE('',#2112,#2113);+#2112 = CARTESIAN_POINT('',(0.,0.225));+#2113 = VECTOR('',#2114,1.);+#2114 = DIRECTION('',(1.,0.));+#2115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2116 = ORIENTED_EDGE('',*,*,#2117,.T.);+#2117 = EDGE_CURVE('',#2090,#2118,#2120,.T.);+#2118 = VERTEX_POINT('',#2119);+#2119 = CARTESIAN_POINT('',(-3.03,0.225,0.));+#2120 = SURFACE_CURVE('',#2121,(#2125,#2132),.PCURVE_S1.);+#2121 = LINE('',#2122,#2123);+#2122 = CARTESIAN_POINT('',(-3.03,0.225,0.15));+#2123 = VECTOR('',#2124,1.);+#2124 = DIRECTION('',(0.,0.,-1.));+#2125 = PCURVE('',#2050,#2126);+#2126 = DEFINITIONAL_REPRESENTATION('',(#2127),#2131);+#2127 = LINE('',#2128,#2129);+#2128 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#2129 = VECTOR('',#2130,1.);+#2130 = DIRECTION('',(1.,0.));+#2131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2132 = PCURVE('',#2133,#2138);+#2133 = PLANE('',#2134);+#2134 = AXIS2_PLACEMENT_3D('',#2135,#2136,#2137);+#2135 = CARTESIAN_POINT('',(-3.03,0.,0.15));+#2136 = DIRECTION('',(1.,0.,0.));+#2137 = DIRECTION('',(0.,0.,-1.));+#2138 = DEFINITIONAL_REPRESENTATION('',(#2139),#2143);+#2139 = LINE('',#2140,#2141);+#2140 = CARTESIAN_POINT('',(0.,0.225));+#2141 = VECTOR('',#2142,1.);+#2142 = DIRECTION('',(1.,0.));+#2143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2144 = ORIENTED_EDGE('',*,*,#2145,.T.);+#2145 = EDGE_CURVE('',#2118,#2146,#2148,.T.);+#2146 = VERTEX_POINT('',#2147);+#2147 = CARTESIAN_POINT('',(-2.2625,0.225,0.));+#2148 = SURFACE_CURVE('',#2149,(#2153,#2160),.PCURVE_S1.);+#2149 = LINE('',#2150,#2151);+#2150 = CARTESIAN_POINT('',(-3.03,0.225,0.));+#2151 = VECTOR('',#2152,1.);+#2152 = DIRECTION('',(1.,0.,0.));+#2153 = PCURVE('',#2050,#2154);+#2154 = DEFINITIONAL_REPRESENTATION('',(#2155),#2159);+#2155 = LINE('',#2156,#2157);+#2156 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#2157 = VECTOR('',#2158,1.);+#2158 = DIRECTION('',(0.,1.));+#2159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2160 = PCURVE('',#2161,#2166);+#2161 = PLANE('',#2162);+#2162 = AXIS2_PLACEMENT_3D('',#2163,#2164,#2165);+#2163 = CARTESIAN_POINT('',(-3.03,0.,0.));+#2164 = DIRECTION('',(0.,0.,1.));+#2165 = DIRECTION('',(1.,0.,0.));+#2166 = DEFINITIONAL_REPRESENTATION('',(#2167),#2171);+#2167 = LINE('',#2168,#2169);+#2168 = CARTESIAN_POINT('',(0.,0.225));+#2169 = VECTOR('',#2170,1.);+#2170 = DIRECTION('',(1.,0.));+#2171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2172 = ORIENTED_EDGE('',*,*,#2173,.T.);+#2173 = EDGE_CURVE('',#2146,#2174,#2176,.T.);+#2174 = VERTEX_POINT('',#2175);+#2175 = CARTESIAN_POINT('',(-1.95,0.225,0.72));+#2176 = SURFACE_CURVE('',#2177,(#2181,#2188),.PCURVE_S1.);+#2177 = LINE('',#2178,#2179);+#2178 = CARTESIAN_POINT('',(-2.2625,0.225,0.));+#2179 = VECTOR('',#2180,1.);+#2180 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#2181 = PCURVE('',#2050,#2182);+#2182 = DEFINITIONAL_REPRESENTATION('',(#2183),#2187);+#2183 = LINE('',#2184,#2185);+#2184 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#2185 = VECTOR('',#2186,1.);+#2186 = DIRECTION('',(-0.917323062896,0.398143690493));+#2187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2188 = PCURVE('',#2189,#2194);+#2189 = PLANE('',#2190);+#2190 = AXIS2_PLACEMENT_3D('',#2191,#2192,#2193);+#2191 = CARTESIAN_POINT('',(-2.2625,0.,0.));+#2192 = DIRECTION('',(-0.917323062896,0.,0.398143690493));+#2193 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#2194 = DEFINITIONAL_REPRESENTATION('',(#2195),#2199);+#2195 = LINE('',#2196,#2197);+#2196 = CARTESIAN_POINT('',(0.,0.225));+#2197 = VECTOR('',#2198,1.);+#2198 = DIRECTION('',(1.,0.));+#2199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2200 = ORIENTED_EDGE('',*,*,#2201,.T.);+#2201 = EDGE_CURVE('',#2174,#2202,#2204,.T.);+#2202 = VERTEX_POINT('',#2203);+#2203 = CARTESIAN_POINT('',(-1.9,0.225,0.72));+#2204 = SURFACE_CURVE('',#2205,(#2209,#2216),.PCURVE_S1.);+#2205 = LINE('',#2206,#2207);+#2206 = CARTESIAN_POINT('',(-1.95,0.225,0.72));+#2207 = VECTOR('',#2208,1.);+#2208 = DIRECTION('',(1.,0.,0.));+#2209 = PCURVE('',#2050,#2210);+#2210 = DEFINITIONAL_REPRESENTATION('',(#2211),#2215);+#2211 = LINE('',#2212,#2213);+#2212 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#2213 = VECTOR('',#2214,1.);+#2214 = DIRECTION('',(0.,1.));+#2215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2216 = PCURVE('',#2217,#2222);+#2217 = PLANE('',#2218);+#2218 = AXIS2_PLACEMENT_3D('',#2219,#2220,#2221);+#2219 = CARTESIAN_POINT('',(-1.95,0.,0.72));+#2220 = DIRECTION('',(0.,0.,1.));+#2221 = DIRECTION('',(1.,0.,0.));+#2222 = DEFINITIONAL_REPRESENTATION('',(#2223),#2227);+#2223 = LINE('',#2224,#2225);+#2224 = CARTESIAN_POINT('',(0.,0.225));+#2225 = VECTOR('',#2226,1.);+#2226 = DIRECTION('',(1.,0.));+#2227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2228 = ORIENTED_EDGE('',*,*,#2229,.T.);+#2229 = EDGE_CURVE('',#2202,#1948,#2230,.T.);+#2230 = SURFACE_CURVE('',#2231,(#2235,#2242),.PCURVE_S1.);+#2231 = LINE('',#2232,#2233);+#2232 = CARTESIAN_POINT('',(-1.9,0.225,0.72));+#2233 = VECTOR('',#2234,1.);+#2234 = DIRECTION('',(0.,0.,1.));+#2235 = PCURVE('',#2050,#2236);+#2236 = DEFINITIONAL_REPRESENTATION('',(#2237),#2241);+#2237 = LINE('',#2238,#2239);+#2238 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#2239 = VECTOR('',#2240,1.);+#2240 = DIRECTION('',(-1.,0.));+#2241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2242 = PCURVE('',#1968,#2243);+#2243 = DEFINITIONAL_REPRESENTATION('',(#2244),#2248);+#2244 = LINE('',#2245,#2246);+#2245 = CARTESIAN_POINT('',(0.,0.225));+#2246 = VECTOR('',#2247,1.);+#2247 = DIRECTION('',(1.,0.));+#2248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2249 = ADVANCED_FACE('',(#2250),#2217,.F.);+#2250 = FACE_BOUND('',#2251,.F.);+#2251 = EDGE_LOOP('',(#2252,#2275,#2298,#2319));+#2252 = ORIENTED_EDGE('',*,*,#2253,.F.);+#2253 = EDGE_CURVE('',#2254,#2174,#2256,.T.);+#2254 = VERTEX_POINT('',#2255);+#2255 = CARTESIAN_POINT('',(-1.95,-0.225,0.72));+#2256 = SURFACE_CURVE('',#2257,(#2261,#2268),.PCURVE_S1.);+#2257 = LINE('',#2258,#2259);+#2258 = CARTESIAN_POINT('',(-1.95,-0.225,0.72));+#2259 = VECTOR('',#2260,1.);+#2260 = DIRECTION('',(0.,1.,0.));+#2261 = PCURVE('',#2217,#2262);+#2262 = DEFINITIONAL_REPRESENTATION('',(#2263),#2267);+#2263 = LINE('',#2264,#2265);+#2264 = CARTESIAN_POINT('',(0.,-0.225));+#2265 = VECTOR('',#2266,1.);+#2266 = DIRECTION('',(0.,1.));+#2267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2268 = PCURVE('',#2189,#2269);+#2269 = DEFINITIONAL_REPRESENTATION('',(#2270),#2274);+#2270 = LINE('',#2271,#2272);+#2271 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#2272 = VECTOR('',#2273,1.);+#2273 = DIRECTION('',(0.,1.));+#2274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2275 = ORIENTED_EDGE('',*,*,#2276,.T.);+#2276 = EDGE_CURVE('',#2254,#2277,#2279,.T.);+#2277 = VERTEX_POINT('',#2278);+#2278 = CARTESIAN_POINT('',(-1.9,-0.225,0.72));+#2279 = SURFACE_CURVE('',#2280,(#2284,#2291),.PCURVE_S1.);+#2280 = LINE('',#2281,#2282);+#2281 = CARTESIAN_POINT('',(-1.95,-0.225,0.72));+#2282 = VECTOR('',#2283,1.);+#2283 = DIRECTION('',(1.,0.,0.));+#2284 = PCURVE('',#2217,#2285);+#2285 = DEFINITIONAL_REPRESENTATION('',(#2286),#2290);+#2286 = LINE('',#2287,#2288);+#2287 = CARTESIAN_POINT('',(0.,-0.225));+#2288 = VECTOR('',#2289,1.);+#2289 = DIRECTION('',(1.,0.));+#2290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2291 = PCURVE('',#1996,#2292);+#2292 = DEFINITIONAL_REPRESENTATION('',(#2293),#2297);+#2293 = LINE('',#2294,#2295);+#2294 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#2295 = VECTOR('',#2296,1.);+#2296 = DIRECTION('',(0.,1.));+#2297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2298 = ORIENTED_EDGE('',*,*,#2299,.T.);+#2299 = EDGE_CURVE('',#2277,#2202,#2300,.T.);+#2300 = SURFACE_CURVE('',#2301,(#2305,#2312),.PCURVE_S1.);+#2301 = LINE('',#2302,#2303);+#2302 = CARTESIAN_POINT('',(-1.9,-0.225,0.72));+#2303 = VECTOR('',#2304,1.);+#2304 = DIRECTION('',(0.,1.,0.));+#2305 = PCURVE('',#2217,#2306);+#2306 = DEFINITIONAL_REPRESENTATION('',(#2307),#2311);+#2307 = LINE('',#2308,#2309);+#2308 = CARTESIAN_POINT('',(5.E-02,-0.225));+#2309 = VECTOR('',#2310,1.);+#2310 = DIRECTION('',(0.,1.));+#2311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2312 = PCURVE('',#1968,#2313);+#2313 = DEFINITIONAL_REPRESENTATION('',(#2314),#2318);+#2314 = LINE('',#2315,#2316);+#2315 = CARTESIAN_POINT('',(0.,-0.225));+#2316 = VECTOR('',#2317,1.);+#2317 = DIRECTION('',(0.,1.));+#2318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2319 = ORIENTED_EDGE('',*,*,#2201,.F.);+#2320 = ADVANCED_FACE('',(#2321),#2189,.F.);+#2321 = FACE_BOUND('',#2322,.F.);+#2322 = EDGE_LOOP('',(#2323,#2346,#2347,#2348));+#2323 = ORIENTED_EDGE('',*,*,#2324,.T.);+#2324 = EDGE_CURVE('',#2325,#2254,#2327,.T.);+#2325 = VERTEX_POINT('',#2326);+#2326 = CARTESIAN_POINT('',(-2.2625,-0.225,0.));+#2327 = SURFACE_CURVE('',#2328,(#2332,#2339),.PCURVE_S1.);+#2328 = LINE('',#2329,#2330);+#2329 = CARTESIAN_POINT('',(-2.2625,-0.225,0.));+#2330 = VECTOR('',#2331,1.);+#2331 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#2332 = PCURVE('',#2189,#2333);+#2333 = DEFINITIONAL_REPRESENTATION('',(#2334),#2338);+#2334 = LINE('',#2335,#2336);+#2335 = CARTESIAN_POINT('',(0.,-0.225));+#2336 = VECTOR('',#2337,1.);+#2337 = DIRECTION('',(1.,0.));+#2338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2339 = PCURVE('',#1996,#2340);+#2340 = DEFINITIONAL_REPRESENTATION('',(#2341),#2345);+#2341 = LINE('',#2342,#2343);+#2342 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#2343 = VECTOR('',#2344,1.);+#2344 = DIRECTION('',(-0.917323062896,0.398143690493));+#2345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2346 = ORIENTED_EDGE('',*,*,#2253,.T.);+#2347 = ORIENTED_EDGE('',*,*,#2173,.F.);+#2348 = ORIENTED_EDGE('',*,*,#2349,.T.);+#2349 = EDGE_CURVE('',#2146,#2325,#2350,.T.);+#2350 = SURFACE_CURVE('',#2351,(#2355,#2362),.PCURVE_S1.);+#2351 = LINE('',#2352,#2353);+#2352 = CARTESIAN_POINT('',(-2.2625,0.225,0.));+#2353 = VECTOR('',#2354,1.);+#2354 = DIRECTION('',(0.,-1.,0.));+#2355 = PCURVE('',#2189,#2356);+#2356 = DEFINITIONAL_REPRESENTATION('',(#2357),#2361);+#2357 = LINE('',#2358,#2359);+#2358 = CARTESIAN_POINT('',(0.,0.225));+#2359 = VECTOR('',#2360,1.);+#2360 = DIRECTION('',(0.,-1.));+#2361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2362 = PCURVE('',#2161,#2363);+#2363 = DEFINITIONAL_REPRESENTATION('',(#2364),#2368);+#2364 = LINE('',#2365,#2366);+#2365 = CARTESIAN_POINT('',(0.7675,0.225));+#2366 = VECTOR('',#2367,1.);+#2367 = DIRECTION('',(0.,-1.));+#2368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2369 = ADVANCED_FACE('',(#2370),#2161,.F.);+#2370 = FACE_BOUND('',#2371,.F.);+#2371 = EDGE_LOOP('',(#2372,#2395,#2396,#2397));+#2372 = ORIENTED_EDGE('',*,*,#2373,.T.);+#2373 = EDGE_CURVE('',#2374,#2325,#2376,.T.);+#2374 = VERTEX_POINT('',#2375);+#2375 = CARTESIAN_POINT('',(-3.03,-0.225,0.));+#2376 = SURFACE_CURVE('',#2377,(#2381,#2388),.PCURVE_S1.);+#2377 = LINE('',#2378,#2379);+#2378 = CARTESIAN_POINT('',(-3.03,-0.225,0.));+#2379 = VECTOR('',#2380,1.);+#2380 = DIRECTION('',(1.,0.,0.));+#2381 = PCURVE('',#2161,#2382);+#2382 = DEFINITIONAL_REPRESENTATION('',(#2383),#2387);+#2383 = LINE('',#2384,#2385);+#2384 = CARTESIAN_POINT('',(0.,-0.225));+#2385 = VECTOR('',#2386,1.);+#2386 = DIRECTION('',(1.,0.));+#2387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2388 = PCURVE('',#1996,#2389);+#2389 = DEFINITIONAL_REPRESENTATION('',(#2390),#2394);+#2390 = LINE('',#2391,#2392);+#2391 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#2392 = VECTOR('',#2393,1.);+#2393 = DIRECTION('',(0.,1.));+#2394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2395 = ORIENTED_EDGE('',*,*,#2349,.F.);+#2396 = ORIENTED_EDGE('',*,*,#2145,.F.);+#2397 = ORIENTED_EDGE('',*,*,#2398,.T.);+#2398 = EDGE_CURVE('',#2118,#2374,#2399,.T.);+#2399 = SURFACE_CURVE('',#2400,(#2404,#2411),.PCURVE_S1.);+#2400 = LINE('',#2401,#2402);+#2401 = CARTESIAN_POINT('',(-3.03,0.225,0.));+#2402 = VECTOR('',#2403,1.);+#2403 = DIRECTION('',(0.,-1.,0.));+#2404 = PCURVE('',#2161,#2405);+#2405 = DEFINITIONAL_REPRESENTATION('',(#2406),#2410);+#2406 = LINE('',#2407,#2408);+#2407 = CARTESIAN_POINT('',(0.,0.225));+#2408 = VECTOR('',#2409,1.);+#2409 = DIRECTION('',(0.,-1.));+#2410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2411 = PCURVE('',#2133,#2412);+#2412 = DEFINITIONAL_REPRESENTATION('',(#2413),#2417);+#2413 = LINE('',#2414,#2415);+#2414 = CARTESIAN_POINT('',(0.15,0.225));+#2415 = VECTOR('',#2416,1.);+#2416 = DIRECTION('',(0.,-1.));+#2417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2418 = ADVANCED_FACE('',(#2419),#2133,.F.);+#2419 = FACE_BOUND('',#2420,.F.);+#2420 = EDGE_LOOP('',(#2421,#2444,#2445,#2446));+#2421 = ORIENTED_EDGE('',*,*,#2422,.T.);+#2422 = EDGE_CURVE('',#2423,#2374,#2425,.T.);+#2423 = VERTEX_POINT('',#2424);+#2424 = CARTESIAN_POINT('',(-3.03,-0.225,0.15));+#2425 = SURFACE_CURVE('',#2426,(#2430,#2437),.PCURVE_S1.);+#2426 = LINE('',#2427,#2428);+#2427 = CARTESIAN_POINT('',(-3.03,-0.225,0.15));+#2428 = VECTOR('',#2429,1.);+#2429 = DIRECTION('',(0.,0.,-1.));+#2430 = PCURVE('',#2133,#2431);+#2431 = DEFINITIONAL_REPRESENTATION('',(#2432),#2436);+#2432 = LINE('',#2433,#2434);+#2433 = CARTESIAN_POINT('',(0.,-0.225));+#2434 = VECTOR('',#2435,1.);+#2435 = DIRECTION('',(1.,0.));+#2436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2437 = PCURVE('',#1996,#2438);+#2438 = DEFINITIONAL_REPRESENTATION('',(#2439),#2443);+#2439 = LINE('',#2440,#2441);+#2440 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#2441 = VECTOR('',#2442,1.);+#2442 = DIRECTION('',(1.,0.));+#2443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2444 = ORIENTED_EDGE('',*,*,#2398,.F.);+#2445 = ORIENTED_EDGE('',*,*,#2117,.F.);+#2446 = ORIENTED_EDGE('',*,*,#2447,.T.);+#2447 = EDGE_CURVE('',#2090,#2423,#2448,.T.);+#2448 = SURFACE_CURVE('',#2449,(#2453,#2460),.PCURVE_S1.);+#2449 = LINE('',#2450,#2451);+#2450 = CARTESIAN_POINT('',(-3.03,0.225,0.15));+#2451 = VECTOR('',#2452,1.);+#2452 = DIRECTION('',(0.,-1.,0.));+#2453 = PCURVE('',#2133,#2454);+#2454 = DEFINITIONAL_REPRESENTATION('',(#2455),#2459);+#2455 = LINE('',#2456,#2457);+#2456 = CARTESIAN_POINT('',(0.,0.225));+#2457 = VECTOR('',#2458,1.);+#2458 = DIRECTION('',(0.,-1.));+#2459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2460 = PCURVE('',#2105,#2461);+#2461 = DEFINITIONAL_REPRESENTATION('',(#2462),#2466);+#2462 = LINE('',#2463,#2464);+#2463 = CARTESIAN_POINT('',(0.6175,0.225));+#2464 = VECTOR('',#2465,1.);+#2465 = DIRECTION('',(0.,-1.));+#2466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2467 = ADVANCED_FACE('',(#2468),#2105,.F.);+#2468 = FACE_BOUND('',#2469,.F.);+#2469 = EDGE_LOOP('',(#2470,#2493,#2494,#2495));+#2470 = ORIENTED_EDGE('',*,*,#2471,.T.);+#2471 = EDGE_CURVE('',#2472,#2423,#2474,.T.);+#2472 = VERTEX_POINT('',#2473);+#2473 = CARTESIAN_POINT('',(-2.4125,-0.225,0.15));+#2474 = SURFACE_CURVE('',#2475,(#2479,#2486),.PCURVE_S1.);+#2475 = LINE('',#2476,#2477);+#2476 = CARTESIAN_POINT('',(-2.4125,-0.225,0.15));+#2477 = VECTOR('',#2478,1.);+#2478 = DIRECTION('',(-1.,0.,0.));+#2479 = PCURVE('',#2105,#2480);+#2480 = DEFINITIONAL_REPRESENTATION('',(#2481),#2485);+#2481 = LINE('',#2482,#2483);+#2482 = CARTESIAN_POINT('',(0.,-0.225));+#2483 = VECTOR('',#2484,1.);+#2484 = DIRECTION('',(1.,0.));+#2485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2486 = PCURVE('',#1996,#2487);+#2487 = DEFINITIONAL_REPRESENTATION('',(#2488),#2492);+#2488 = LINE('',#2489,#2490);+#2489 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#2490 = VECTOR('',#2491,1.);+#2491 = DIRECTION('',(0.,-1.));+#2492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2493 = ORIENTED_EDGE('',*,*,#2447,.F.);+#2494 = ORIENTED_EDGE('',*,*,#2089,.F.);+#2495 = ORIENTED_EDGE('',*,*,#2496,.T.);+#2496 = EDGE_CURVE('',#2067,#2472,#2497,.T.);+#2497 = SURFACE_CURVE('',#2498,(#2502,#2509),.PCURVE_S1.);+#2498 = LINE('',#2499,#2500);+#2499 = CARTESIAN_POINT('',(-2.4125,0.225,0.15));+#2500 = VECTOR('',#2501,1.);+#2501 = DIRECTION('',(0.,-1.,0.));+#2502 = PCURVE('',#2105,#2503);+#2503 = DEFINITIONAL_REPRESENTATION('',(#2504),#2508);+#2504 = LINE('',#2505,#2506);+#2505 = CARTESIAN_POINT('',(0.,0.225));+#2506 = VECTOR('',#2507,1.);+#2507 = DIRECTION('',(0.,-1.));+#2508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2509 = PCURVE('',#2024,#2510);+#2510 = DEFINITIONAL_REPRESENTATION('',(#2511),#2515);+#2511 = LINE('',#2512,#2513);+#2512 = CARTESIAN_POINT('',(0.784892508564,0.225));+#2513 = VECTOR('',#2514,1.);+#2514 = DIRECTION('',(-0.,-1.));+#2515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2516 = ADVANCED_FACE('',(#2517),#2024,.F.);+#2517 = FACE_BOUND('',#2518,.F.);+#2518 = EDGE_LOOP('',(#2519,#2540,#2541,#2542));+#2519 = ORIENTED_EDGE('',*,*,#2520,.T.);+#2520 = EDGE_CURVE('',#1981,#2472,#2521,.T.);+#2521 = SURFACE_CURVE('',#2522,(#2526,#2533),.PCURVE_S1.);+#2522 = LINE('',#2523,#2524);+#2523 = CARTESIAN_POINT('',(-2.1,-0.225,0.87));+#2524 = VECTOR('',#2525,1.);+#2525 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#2526 = PCURVE('',#2024,#2527);+#2527 = DEFINITIONAL_REPRESENTATION('',(#2528),#2532);+#2528 = LINE('',#2529,#2530);+#2529 = CARTESIAN_POINT('',(-0.,-0.225));+#2530 = VECTOR('',#2531,1.);+#2531 = DIRECTION('',(1.,0.));+#2532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2533 = PCURVE('',#1996,#2534);+#2534 = DEFINITIONAL_REPRESENTATION('',(#2535),#2539);+#2535 = LINE('',#2536,#2537);+#2536 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#2537 = VECTOR('',#2538,1.);+#2538 = DIRECTION('',(0.917323062896,-0.398143690493));+#2539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2540 = ORIENTED_EDGE('',*,*,#2496,.F.);+#2541 = ORIENTED_EDGE('',*,*,#2066,.F.);+#2542 = ORIENTED_EDGE('',*,*,#2008,.T.);+#2543 = ADVANCED_FACE('',(#2544),#1996,.T.);+#2544 = FACE_BOUND('',#2545,.T.);+#2545 = EDGE_LOOP('',(#2546,#2547,#2548,#2549,#2550,#2551,#2552,#2553));+#2546 = ORIENTED_EDGE('',*,*,#1980,.T.);+#2547 = ORIENTED_EDGE('',*,*,#2520,.T.);+#2548 = ORIENTED_EDGE('',*,*,#2471,.T.);+#2549 = ORIENTED_EDGE('',*,*,#2422,.T.);+#2550 = ORIENTED_EDGE('',*,*,#2373,.T.);+#2551 = ORIENTED_EDGE('',*,*,#2324,.T.);+#2552 = ORIENTED_EDGE('',*,*,#2276,.T.);+#2553 = ORIENTED_EDGE('',*,*,#2554,.T.);+#2554 = EDGE_CURVE('',#2277,#1946,#2555,.T.);+#2555 = SURFACE_CURVE('',#2556,(#2560,#2567),.PCURVE_S1.);+#2556 = LINE('',#2557,#2558);+#2557 = CARTESIAN_POINT('',(-1.9,-0.225,0.72));+#2558 = VECTOR('',#2559,1.);+#2559 = DIRECTION('',(0.,0.,1.));+#2560 = PCURVE('',#1996,#2561);+#2561 = DEFINITIONAL_REPRESENTATION('',(#2562),#2566);+#2562 = LINE('',#2563,#2564);+#2563 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#2564 = VECTOR('',#2565,1.);+#2565 = DIRECTION('',(-1.,0.));+#2566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2567 = PCURVE('',#1968,#2568);+#2568 = DEFINITIONAL_REPRESENTATION('',(#2569),#2573);+#2569 = LINE('',#2570,#2571);+#2570 = CARTESIAN_POINT('',(0.,-0.225));+#2571 = VECTOR('',#2572,1.);+#2572 = DIRECTION('',(1.,0.));+#2573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2574 = ADVANCED_FACE('',(#2575),#1968,.F.);+#2575 = FACE_BOUND('',#2576,.F.);+#2576 = EDGE_LOOP('',(#2577,#2578,#2579,#2580));+#2577 = ORIENTED_EDGE('',*,*,#2299,.F.);+#2578 = ORIENTED_EDGE('',*,*,#2554,.T.);+#2579 = ORIENTED_EDGE('',*,*,#1945,.T.);+#2580 = ORIENTED_EDGE('',*,*,#2229,.F.);+#2581 = MANIFOLD_SOLID_BREP('',#2582);+#2582 = CLOSED_SHELL('',(#2583,#2703,#2891,#2962,#3011,#3060,#3109,#3158+ ,#3185,#3216));+#2583 = ADVANCED_FACE('',(#2584),#2598,.F.);+#2584 = FACE_BOUND('',#2585,.F.);+#2585 = EDGE_LOOP('',(#2586,#2621,#2649,#2677));+#2586 = ORIENTED_EDGE('',*,*,#2587,.F.);+#2587 = EDGE_CURVE('',#2588,#2590,#2592,.T.);+#2588 = VERTEX_POINT('',#2589);+#2589 = CARTESIAN_POINT('',(-1.9,-1.225,0.87));+#2590 = VERTEX_POINT('',#2591);+#2591 = CARTESIAN_POINT('',(-1.9,-0.775,0.87));+#2592 = SURFACE_CURVE('',#2593,(#2597,#2609),.PCURVE_S1.);+#2593 = LINE('',#2594,#2595);+#2594 = CARTESIAN_POINT('',(-1.9,-1.225,0.87));+#2595 = VECTOR('',#2596,1.);+#2596 = DIRECTION('',(0.,1.,0.));+#2597 = PCURVE('',#2598,#2603);+#2598 = PLANE('',#2599);+#2599 = AXIS2_PLACEMENT_3D('',#2600,#2601,#2602);+#2600 = CARTESIAN_POINT('',(-1.9,-1.,0.87));+#2601 = DIRECTION('',(-0.,-0.,-1.));+#2602 = DIRECTION('',(-1.,0.,0.));+#2603 = DEFINITIONAL_REPRESENTATION('',(#2604),#2608);+#2604 = LINE('',#2605,#2606);+#2605 = CARTESIAN_POINT('',(0.,-0.225));+#2606 = VECTOR('',#2607,1.);+#2607 = DIRECTION('',(0.,1.));+#2608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2609 = PCURVE('',#2610,#2615);+#2610 = PLANE('',#2611);+#2611 = AXIS2_PLACEMENT_3D('',#2612,#2613,#2614);+#2612 = CARTESIAN_POINT('',(-1.9,-1.,0.72));+#2613 = DIRECTION('',(-1.,0.,0.));+#2614 = DIRECTION('',(0.,0.,1.));+#2615 = DEFINITIONAL_REPRESENTATION('',(#2616),#2620);+#2616 = LINE('',#2617,#2618);+#2617 = CARTESIAN_POINT('',(0.15,-0.225));+#2618 = VECTOR('',#2619,1.);+#2619 = DIRECTION('',(0.,1.));+#2620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2621 = ORIENTED_EDGE('',*,*,#2622,.T.);+#2622 = EDGE_CURVE('',#2588,#2623,#2625,.T.);+#2623 = VERTEX_POINT('',#2624);+#2624 = CARTESIAN_POINT('',(-2.1,-1.225,0.87));+#2625 = SURFACE_CURVE('',#2626,(#2630,#2637),.PCURVE_S1.);+#2626 = LINE('',#2627,#2628);+#2627 = CARTESIAN_POINT('',(-1.9,-1.225,0.87));+#2628 = VECTOR('',#2629,1.);+#2629 = DIRECTION('',(-1.,0.,0.));+#2630 = PCURVE('',#2598,#2631);+#2631 = DEFINITIONAL_REPRESENTATION('',(#2632),#2636);+#2632 = LINE('',#2633,#2634);+#2633 = CARTESIAN_POINT('',(0.,-0.225));+#2634 = VECTOR('',#2635,1.);+#2635 = DIRECTION('',(1.,0.));+#2636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2637 = PCURVE('',#2638,#2643);+#2638 = PLANE('',#2639);+#2639 = AXIS2_PLACEMENT_3D('',#2640,#2641,#2642);+#2640 = CARTESIAN_POINT('',(-2.38850950278,-1.225,0.318416529686));+#2641 = DIRECTION('',(-0.,-1.,-0.));+#2642 = DIRECTION('',(0.,0.,-1.));+#2643 = DEFINITIONAL_REPRESENTATION('',(#2644),#2648);+#2644 = LINE('',#2645,#2646);+#2645 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#2646 = VECTOR('',#2647,1.);+#2647 = DIRECTION('',(0.,-1.));+#2648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2649 = ORIENTED_EDGE('',*,*,#2650,.F.);+#2650 = EDGE_CURVE('',#2651,#2623,#2653,.T.);+#2651 = VERTEX_POINT('',#2652);+#2652 = CARTESIAN_POINT('',(-2.1,-0.775,0.87));+#2653 = SURFACE_CURVE('',#2654,(#2658,#2665),.PCURVE_S1.);+#2654 = LINE('',#2655,#2656);+#2655 = CARTESIAN_POINT('',(-2.1,-0.775,0.87));+#2656 = VECTOR('',#2657,1.);+#2657 = DIRECTION('',(0.,-1.,0.));+#2658 = PCURVE('',#2598,#2659);+#2659 = DEFINITIONAL_REPRESENTATION('',(#2660),#2664);+#2660 = LINE('',#2661,#2662);+#2661 = CARTESIAN_POINT('',(0.2,0.225));+#2662 = VECTOR('',#2663,1.);+#2663 = DIRECTION('',(0.,-1.));+#2664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2665 = PCURVE('',#2666,#2671);+#2666 = PLANE('',#2667);+#2667 = AXIS2_PLACEMENT_3D('',#2668,#2669,#2670);+#2668 = CARTESIAN_POINT('',(-2.1,-1.,0.87));+#2669 = DIRECTION('',(0.917323062896,0.,-0.398143690493));+#2670 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#2671 = DEFINITIONAL_REPRESENTATION('',(#2672),#2676);+#2672 = LINE('',#2673,#2674);+#2673 = CARTESIAN_POINT('',(0.,0.225));+#2674 = VECTOR('',#2675,1.);+#2675 = DIRECTION('',(-0.,-1.));+#2676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2677 = ORIENTED_EDGE('',*,*,#2678,.F.);+#2678 = EDGE_CURVE('',#2590,#2651,#2679,.T.);+#2679 = SURFACE_CURVE('',#2680,(#2684,#2691),.PCURVE_S1.);+#2680 = LINE('',#2681,#2682);+#2681 = CARTESIAN_POINT('',(-1.9,-0.775,0.87));+#2682 = VECTOR('',#2683,1.);+#2683 = DIRECTION('',(-1.,0.,0.));+#2684 = PCURVE('',#2598,#2685);+#2685 = DEFINITIONAL_REPRESENTATION('',(#2686),#2690);+#2686 = LINE('',#2687,#2688);+#2687 = CARTESIAN_POINT('',(0.,0.225));+#2688 = VECTOR('',#2689,1.);+#2689 = DIRECTION('',(1.,0.));+#2690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2691 = PCURVE('',#2692,#2697);+#2692 = PLANE('',#2693);+#2693 = AXIS2_PLACEMENT_3D('',#2694,#2695,#2696);+#2694 = CARTESIAN_POINT('',(-2.38850950278,-0.775,0.318416529686));+#2695 = DIRECTION('',(-0.,-1.,-0.));+#2696 = DIRECTION('',(0.,0.,-1.));+#2697 = DEFINITIONAL_REPRESENTATION('',(#2698),#2702);+#2698 = LINE('',#2699,#2700);+#2699 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#2700 = VECTOR('',#2701,1.);+#2701 = DIRECTION('',(0.,-1.));+#2702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2703 = ADVANCED_FACE('',(#2704),#2692,.F.);+#2704 = FACE_BOUND('',#2705,.F.);+#2705 = EDGE_LOOP('',(#2706,#2707,#2730,#2758,#2786,#2814,#2842,#2870));+#2706 = ORIENTED_EDGE('',*,*,#2678,.T.);+#2707 = ORIENTED_EDGE('',*,*,#2708,.T.);+#2708 = EDGE_CURVE('',#2651,#2709,#2711,.T.);+#2709 = VERTEX_POINT('',#2710);+#2710 = CARTESIAN_POINT('',(-2.4125,-0.775,0.15));+#2711 = SURFACE_CURVE('',#2712,(#2716,#2723),.PCURVE_S1.);+#2712 = LINE('',#2713,#2714);+#2713 = CARTESIAN_POINT('',(-2.1,-0.775,0.87));+#2714 = VECTOR('',#2715,1.);+#2715 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#2716 = PCURVE('',#2692,#2717);+#2717 = DEFINITIONAL_REPRESENTATION('',(#2718),#2722);+#2718 = LINE('',#2719,#2720);+#2719 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#2720 = VECTOR('',#2721,1.);+#2721 = DIRECTION('',(0.917323062896,-0.398143690493));+#2722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2723 = PCURVE('',#2666,#2724);+#2724 = DEFINITIONAL_REPRESENTATION('',(#2725),#2729);+#2725 = LINE('',#2726,#2727);+#2726 = CARTESIAN_POINT('',(0.,0.225));+#2727 = VECTOR('',#2728,1.);+#2728 = DIRECTION('',(1.,0.));+#2729 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2730 = ORIENTED_EDGE('',*,*,#2731,.T.);+#2731 = EDGE_CURVE('',#2709,#2732,#2734,.T.);+#2732 = VERTEX_POINT('',#2733);+#2733 = CARTESIAN_POINT('',(-3.03,-0.775,0.15));+#2734 = SURFACE_CURVE('',#2735,(#2739,#2746),.PCURVE_S1.);+#2735 = LINE('',#2736,#2737);+#2736 = CARTESIAN_POINT('',(-2.4125,-0.775,0.15));+#2737 = VECTOR('',#2738,1.);+#2738 = DIRECTION('',(-1.,0.,0.));+#2739 = PCURVE('',#2692,#2740);+#2740 = DEFINITIONAL_REPRESENTATION('',(#2741),#2745);+#2741 = LINE('',#2742,#2743);+#2742 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#2743 = VECTOR('',#2744,1.);+#2744 = DIRECTION('',(0.,-1.));+#2745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2746 = PCURVE('',#2747,#2752);+#2747 = PLANE('',#2748);+#2748 = AXIS2_PLACEMENT_3D('',#2749,#2750,#2751);+#2749 = CARTESIAN_POINT('',(-2.4125,-1.,0.15));+#2750 = DIRECTION('',(-0.,-0.,-1.));+#2751 = DIRECTION('',(-1.,0.,0.));+#2752 = DEFINITIONAL_REPRESENTATION('',(#2753),#2757);+#2753 = LINE('',#2754,#2755);+#2754 = CARTESIAN_POINT('',(0.,0.225));+#2755 = VECTOR('',#2756,1.);+#2756 = DIRECTION('',(1.,0.));+#2757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2758 = ORIENTED_EDGE('',*,*,#2759,.T.);+#2759 = EDGE_CURVE('',#2732,#2760,#2762,.T.);+#2760 = VERTEX_POINT('',#2761);+#2761 = CARTESIAN_POINT('',(-3.03,-0.775,0.));+#2762 = SURFACE_CURVE('',#2763,(#2767,#2774),.PCURVE_S1.);+#2763 = LINE('',#2764,#2765);+#2764 = CARTESIAN_POINT('',(-3.03,-0.775,0.15));+#2765 = VECTOR('',#2766,1.);+#2766 = DIRECTION('',(0.,0.,-1.));+#2767 = PCURVE('',#2692,#2768);+#2768 = DEFINITIONAL_REPRESENTATION('',(#2769),#2773);+#2769 = LINE('',#2770,#2771);+#2770 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#2771 = VECTOR('',#2772,1.);+#2772 = DIRECTION('',(1.,0.));+#2773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2774 = PCURVE('',#2775,#2780);+#2775 = PLANE('',#2776);+#2776 = AXIS2_PLACEMENT_3D('',#2777,#2778,#2779);+#2777 = CARTESIAN_POINT('',(-3.03,-1.,0.15));+#2778 = DIRECTION('',(1.,0.,0.));+#2779 = DIRECTION('',(0.,0.,-1.));+#2780 = DEFINITIONAL_REPRESENTATION('',(#2781),#2785);+#2781 = LINE('',#2782,#2783);+#2782 = CARTESIAN_POINT('',(0.,0.225));+#2783 = VECTOR('',#2784,1.);+#2784 = DIRECTION('',(1.,0.));+#2785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2786 = ORIENTED_EDGE('',*,*,#2787,.T.);+#2787 = EDGE_CURVE('',#2760,#2788,#2790,.T.);+#2788 = VERTEX_POINT('',#2789);+#2789 = CARTESIAN_POINT('',(-2.2625,-0.775,0.));+#2790 = SURFACE_CURVE('',#2791,(#2795,#2802),.PCURVE_S1.);+#2791 = LINE('',#2792,#2793);+#2792 = CARTESIAN_POINT('',(-3.03,-0.775,0.));+#2793 = VECTOR('',#2794,1.);+#2794 = DIRECTION('',(1.,0.,0.));+#2795 = PCURVE('',#2692,#2796);+#2796 = DEFINITIONAL_REPRESENTATION('',(#2797),#2801);+#2797 = LINE('',#2798,#2799);+#2798 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#2799 = VECTOR('',#2800,1.);+#2800 = DIRECTION('',(0.,1.));+#2801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2802 = PCURVE('',#2803,#2808);+#2803 = PLANE('',#2804);+#2804 = AXIS2_PLACEMENT_3D('',#2805,#2806,#2807);+#2805 = CARTESIAN_POINT('',(-3.03,-1.,0.));+#2806 = DIRECTION('',(0.,0.,1.));+#2807 = DIRECTION('',(1.,0.,0.));+#2808 = DEFINITIONAL_REPRESENTATION('',(#2809),#2813);+#2809 = LINE('',#2810,#2811);+#2810 = CARTESIAN_POINT('',(0.,0.225));+#2811 = VECTOR('',#2812,1.);+#2812 = DIRECTION('',(1.,0.));+#2813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2814 = ORIENTED_EDGE('',*,*,#2815,.T.);+#2815 = EDGE_CURVE('',#2788,#2816,#2818,.T.);+#2816 = VERTEX_POINT('',#2817);+#2817 = CARTESIAN_POINT('',(-1.95,-0.775,0.72));+#2818 = SURFACE_CURVE('',#2819,(#2823,#2830),.PCURVE_S1.);+#2819 = LINE('',#2820,#2821);+#2820 = CARTESIAN_POINT('',(-2.2625,-0.775,0.));+#2821 = VECTOR('',#2822,1.);+#2822 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#2823 = PCURVE('',#2692,#2824);+#2824 = DEFINITIONAL_REPRESENTATION('',(#2825),#2829);+#2825 = LINE('',#2826,#2827);+#2826 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#2827 = VECTOR('',#2828,1.);+#2828 = DIRECTION('',(-0.917323062896,0.398143690493));+#2829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2830 = PCURVE('',#2831,#2836);+#2831 = PLANE('',#2832);+#2832 = AXIS2_PLACEMENT_3D('',#2833,#2834,#2835);+#2833 = CARTESIAN_POINT('',(-2.2625,-1.,0.));+#2834 = DIRECTION('',(-0.917323062896,0.,0.398143690493));+#2835 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#2836 = DEFINITIONAL_REPRESENTATION('',(#2837),#2841);+#2837 = LINE('',#2838,#2839);+#2838 = CARTESIAN_POINT('',(0.,0.225));+#2839 = VECTOR('',#2840,1.);+#2840 = DIRECTION('',(1.,0.));+#2841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2842 = ORIENTED_EDGE('',*,*,#2843,.T.);+#2843 = EDGE_CURVE('',#2816,#2844,#2846,.T.);+#2844 = VERTEX_POINT('',#2845);+#2845 = CARTESIAN_POINT('',(-1.9,-0.775,0.72));+#2846 = SURFACE_CURVE('',#2847,(#2851,#2858),.PCURVE_S1.);+#2847 = LINE('',#2848,#2849);+#2848 = CARTESIAN_POINT('',(-1.95,-0.775,0.72));+#2849 = VECTOR('',#2850,1.);+#2850 = DIRECTION('',(1.,0.,0.));+#2851 = PCURVE('',#2692,#2852);+#2852 = DEFINITIONAL_REPRESENTATION('',(#2853),#2857);+#2853 = LINE('',#2854,#2855);+#2854 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#2855 = VECTOR('',#2856,1.);+#2856 = DIRECTION('',(0.,1.));+#2857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2858 = PCURVE('',#2859,#2864);+#2859 = PLANE('',#2860);+#2860 = AXIS2_PLACEMENT_3D('',#2861,#2862,#2863);+#2861 = CARTESIAN_POINT('',(-1.95,-1.,0.72));+#2862 = DIRECTION('',(0.,0.,1.));+#2863 = DIRECTION('',(1.,0.,0.));+#2864 = DEFINITIONAL_REPRESENTATION('',(#2865),#2869);+#2865 = LINE('',#2866,#2867);+#2866 = CARTESIAN_POINT('',(0.,0.225));+#2867 = VECTOR('',#2868,1.);+#2868 = DIRECTION('',(1.,0.));+#2869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2870 = ORIENTED_EDGE('',*,*,#2871,.T.);+#2871 = EDGE_CURVE('',#2844,#2590,#2872,.T.);+#2872 = SURFACE_CURVE('',#2873,(#2877,#2884),.PCURVE_S1.);+#2873 = LINE('',#2874,#2875);+#2874 = CARTESIAN_POINT('',(-1.9,-0.775,0.72));+#2875 = VECTOR('',#2876,1.);+#2876 = DIRECTION('',(0.,0.,1.));+#2877 = PCURVE('',#2692,#2878);+#2878 = DEFINITIONAL_REPRESENTATION('',(#2879),#2883);+#2879 = LINE('',#2880,#2881);+#2880 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#2881 = VECTOR('',#2882,1.);+#2882 = DIRECTION('',(-1.,0.));+#2883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2884 = PCURVE('',#2610,#2885);+#2885 = DEFINITIONAL_REPRESENTATION('',(#2886),#2890);+#2886 = LINE('',#2887,#2888);+#2887 = CARTESIAN_POINT('',(0.,0.225));+#2888 = VECTOR('',#2889,1.);+#2889 = DIRECTION('',(1.,0.));+#2890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2891 = ADVANCED_FACE('',(#2892),#2859,.F.);+#2892 = FACE_BOUND('',#2893,.F.);+#2893 = EDGE_LOOP('',(#2894,#2917,#2940,#2961));+#2894 = ORIENTED_EDGE('',*,*,#2895,.F.);+#2895 = EDGE_CURVE('',#2896,#2816,#2898,.T.);+#2896 = VERTEX_POINT('',#2897);+#2897 = CARTESIAN_POINT('',(-1.95,-1.225,0.72));+#2898 = SURFACE_CURVE('',#2899,(#2903,#2910),.PCURVE_S1.);+#2899 = LINE('',#2900,#2901);+#2900 = CARTESIAN_POINT('',(-1.95,-1.225,0.72));+#2901 = VECTOR('',#2902,1.);+#2902 = DIRECTION('',(0.,1.,0.));+#2903 = PCURVE('',#2859,#2904);+#2904 = DEFINITIONAL_REPRESENTATION('',(#2905),#2909);+#2905 = LINE('',#2906,#2907);+#2906 = CARTESIAN_POINT('',(0.,-0.225));+#2907 = VECTOR('',#2908,1.);+#2908 = DIRECTION('',(0.,1.));+#2909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2910 = PCURVE('',#2831,#2911);+#2911 = DEFINITIONAL_REPRESENTATION('',(#2912),#2916);+#2912 = LINE('',#2913,#2914);+#2913 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#2914 = VECTOR('',#2915,1.);+#2915 = DIRECTION('',(0.,1.));+#2916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2917 = ORIENTED_EDGE('',*,*,#2918,.T.);+#2918 = EDGE_CURVE('',#2896,#2919,#2921,.T.);+#2919 = VERTEX_POINT('',#2920);+#2920 = CARTESIAN_POINT('',(-1.9,-1.225,0.72));+#2921 = SURFACE_CURVE('',#2922,(#2926,#2933),.PCURVE_S1.);+#2922 = LINE('',#2923,#2924);+#2923 = CARTESIAN_POINT('',(-1.95,-1.225,0.72));+#2924 = VECTOR('',#2925,1.);+#2925 = DIRECTION('',(1.,0.,0.));+#2926 = PCURVE('',#2859,#2927);+#2927 = DEFINITIONAL_REPRESENTATION('',(#2928),#2932);+#2928 = LINE('',#2929,#2930);+#2929 = CARTESIAN_POINT('',(0.,-0.225));+#2930 = VECTOR('',#2931,1.);+#2931 = DIRECTION('',(1.,0.));+#2932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2933 = PCURVE('',#2638,#2934);+#2934 = DEFINITIONAL_REPRESENTATION('',(#2935),#2939);+#2935 = LINE('',#2936,#2937);+#2936 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#2937 = VECTOR('',#2938,1.);+#2938 = DIRECTION('',(0.,1.));+#2939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2940 = ORIENTED_EDGE('',*,*,#2941,.T.);+#2941 = EDGE_CURVE('',#2919,#2844,#2942,.T.);+#2942 = SURFACE_CURVE('',#2943,(#2947,#2954),.PCURVE_S1.);+#2943 = LINE('',#2944,#2945);+#2944 = CARTESIAN_POINT('',(-1.9,-1.225,0.72));+#2945 = VECTOR('',#2946,1.);+#2946 = DIRECTION('',(0.,1.,0.));+#2947 = PCURVE('',#2859,#2948);+#2948 = DEFINITIONAL_REPRESENTATION('',(#2949),#2953);+#2949 = LINE('',#2950,#2951);+#2950 = CARTESIAN_POINT('',(5.E-02,-0.225));+#2951 = VECTOR('',#2952,1.);+#2952 = DIRECTION('',(0.,1.));+#2953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2954 = PCURVE('',#2610,#2955);+#2955 = DEFINITIONAL_REPRESENTATION('',(#2956),#2960);+#2956 = LINE('',#2957,#2958);+#2957 = CARTESIAN_POINT('',(0.,-0.225));+#2958 = VECTOR('',#2959,1.);+#2959 = DIRECTION('',(0.,1.));+#2960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2961 = ORIENTED_EDGE('',*,*,#2843,.F.);+#2962 = ADVANCED_FACE('',(#2963),#2831,.F.);+#2963 = FACE_BOUND('',#2964,.F.);+#2964 = EDGE_LOOP('',(#2965,#2988,#2989,#2990));+#2965 = ORIENTED_EDGE('',*,*,#2966,.T.);+#2966 = EDGE_CURVE('',#2967,#2896,#2969,.T.);+#2967 = VERTEX_POINT('',#2968);+#2968 = CARTESIAN_POINT('',(-2.2625,-1.225,0.));+#2969 = SURFACE_CURVE('',#2970,(#2974,#2981),.PCURVE_S1.);+#2970 = LINE('',#2971,#2972);+#2971 = CARTESIAN_POINT('',(-2.2625,-1.225,0.));+#2972 = VECTOR('',#2973,1.);+#2973 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#2974 = PCURVE('',#2831,#2975);+#2975 = DEFINITIONAL_REPRESENTATION('',(#2976),#2980);+#2976 = LINE('',#2977,#2978);+#2977 = CARTESIAN_POINT('',(0.,-0.225));+#2978 = VECTOR('',#2979,1.);+#2979 = DIRECTION('',(1.,0.));+#2980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2981 = PCURVE('',#2638,#2982);+#2982 = DEFINITIONAL_REPRESENTATION('',(#2983),#2987);+#2983 = LINE('',#2984,#2985);+#2984 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#2985 = VECTOR('',#2986,1.);+#2986 = DIRECTION('',(-0.917323062896,0.398143690493));+#2987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#2988 = ORIENTED_EDGE('',*,*,#2895,.T.);+#2989 = ORIENTED_EDGE('',*,*,#2815,.F.);+#2990 = ORIENTED_EDGE('',*,*,#2991,.T.);+#2991 = EDGE_CURVE('',#2788,#2967,#2992,.T.);+#2992 = SURFACE_CURVE('',#2993,(#2997,#3004),.PCURVE_S1.);+#2993 = LINE('',#2994,#2995);+#2994 = CARTESIAN_POINT('',(-2.2625,-0.775,0.));+#2995 = VECTOR('',#2996,1.);+#2996 = DIRECTION('',(0.,-1.,0.));+#2997 = PCURVE('',#2831,#2998);+#2998 = DEFINITIONAL_REPRESENTATION('',(#2999),#3003);+#2999 = LINE('',#3000,#3001);+#3000 = CARTESIAN_POINT('',(0.,0.225));+#3001 = VECTOR('',#3002,1.);+#3002 = DIRECTION('',(0.,-1.));+#3003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3004 = PCURVE('',#2803,#3005);+#3005 = DEFINITIONAL_REPRESENTATION('',(#3006),#3010);+#3006 = LINE('',#3007,#3008);+#3007 = CARTESIAN_POINT('',(0.7675,0.225));+#3008 = VECTOR('',#3009,1.);+#3009 = DIRECTION('',(0.,-1.));+#3010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3011 = ADVANCED_FACE('',(#3012),#2803,.F.);+#3012 = FACE_BOUND('',#3013,.F.);+#3013 = EDGE_LOOP('',(#3014,#3037,#3038,#3039));+#3014 = ORIENTED_EDGE('',*,*,#3015,.T.);+#3015 = EDGE_CURVE('',#3016,#2967,#3018,.T.);+#3016 = VERTEX_POINT('',#3017);+#3017 = CARTESIAN_POINT('',(-3.03,-1.225,0.));+#3018 = SURFACE_CURVE('',#3019,(#3023,#3030),.PCURVE_S1.);+#3019 = LINE('',#3020,#3021);+#3020 = CARTESIAN_POINT('',(-3.03,-1.225,0.));+#3021 = VECTOR('',#3022,1.);+#3022 = DIRECTION('',(1.,0.,0.));+#3023 = PCURVE('',#2803,#3024);+#3024 = DEFINITIONAL_REPRESENTATION('',(#3025),#3029);+#3025 = LINE('',#3026,#3027);+#3026 = CARTESIAN_POINT('',(0.,-0.225));+#3027 = VECTOR('',#3028,1.);+#3028 = DIRECTION('',(1.,0.));+#3029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3030 = PCURVE('',#2638,#3031);+#3031 = DEFINITIONAL_REPRESENTATION('',(#3032),#3036);+#3032 = LINE('',#3033,#3034);+#3033 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#3034 = VECTOR('',#3035,1.);+#3035 = DIRECTION('',(0.,1.));+#3036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3037 = ORIENTED_EDGE('',*,*,#2991,.F.);+#3038 = ORIENTED_EDGE('',*,*,#2787,.F.);+#3039 = ORIENTED_EDGE('',*,*,#3040,.T.);+#3040 = EDGE_CURVE('',#2760,#3016,#3041,.T.);+#3041 = SURFACE_CURVE('',#3042,(#3046,#3053),.PCURVE_S1.);+#3042 = LINE('',#3043,#3044);+#3043 = CARTESIAN_POINT('',(-3.03,-0.775,0.));+#3044 = VECTOR('',#3045,1.);+#3045 = DIRECTION('',(0.,-1.,0.));+#3046 = PCURVE('',#2803,#3047);+#3047 = DEFINITIONAL_REPRESENTATION('',(#3048),#3052);+#3048 = LINE('',#3049,#3050);+#3049 = CARTESIAN_POINT('',(0.,0.225));+#3050 = VECTOR('',#3051,1.);+#3051 = DIRECTION('',(0.,-1.));+#3052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3053 = PCURVE('',#2775,#3054);+#3054 = DEFINITIONAL_REPRESENTATION('',(#3055),#3059);+#3055 = LINE('',#3056,#3057);+#3056 = CARTESIAN_POINT('',(0.15,0.225));+#3057 = VECTOR('',#3058,1.);+#3058 = DIRECTION('',(0.,-1.));+#3059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3060 = ADVANCED_FACE('',(#3061),#2775,.F.);+#3061 = FACE_BOUND('',#3062,.F.);+#3062 = EDGE_LOOP('',(#3063,#3086,#3087,#3088));+#3063 = ORIENTED_EDGE('',*,*,#3064,.T.);+#3064 = EDGE_CURVE('',#3065,#3016,#3067,.T.);+#3065 = VERTEX_POINT('',#3066);+#3066 = CARTESIAN_POINT('',(-3.03,-1.225,0.15));+#3067 = SURFACE_CURVE('',#3068,(#3072,#3079),.PCURVE_S1.);+#3068 = LINE('',#3069,#3070);+#3069 = CARTESIAN_POINT('',(-3.03,-1.225,0.15));+#3070 = VECTOR('',#3071,1.);+#3071 = DIRECTION('',(0.,0.,-1.));+#3072 = PCURVE('',#2775,#3073);+#3073 = DEFINITIONAL_REPRESENTATION('',(#3074),#3078);+#3074 = LINE('',#3075,#3076);+#3075 = CARTESIAN_POINT('',(0.,-0.225));+#3076 = VECTOR('',#3077,1.);+#3077 = DIRECTION('',(1.,0.));+#3078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3079 = PCURVE('',#2638,#3080);+#3080 = DEFINITIONAL_REPRESENTATION('',(#3081),#3085);+#3081 = LINE('',#3082,#3083);+#3082 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#3083 = VECTOR('',#3084,1.);+#3084 = DIRECTION('',(1.,0.));+#3085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3086 = ORIENTED_EDGE('',*,*,#3040,.F.);+#3087 = ORIENTED_EDGE('',*,*,#2759,.F.);+#3088 = ORIENTED_EDGE('',*,*,#3089,.T.);+#3089 = EDGE_CURVE('',#2732,#3065,#3090,.T.);+#3090 = SURFACE_CURVE('',#3091,(#3095,#3102),.PCURVE_S1.);+#3091 = LINE('',#3092,#3093);+#3092 = CARTESIAN_POINT('',(-3.03,-0.775,0.15));+#3093 = VECTOR('',#3094,1.);+#3094 = DIRECTION('',(0.,-1.,0.));+#3095 = PCURVE('',#2775,#3096);+#3096 = DEFINITIONAL_REPRESENTATION('',(#3097),#3101);+#3097 = LINE('',#3098,#3099);+#3098 = CARTESIAN_POINT('',(0.,0.225));+#3099 = VECTOR('',#3100,1.);+#3100 = DIRECTION('',(0.,-1.));+#3101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3102 = PCURVE('',#2747,#3103);+#3103 = DEFINITIONAL_REPRESENTATION('',(#3104),#3108);+#3104 = LINE('',#3105,#3106);+#3105 = CARTESIAN_POINT('',(0.6175,0.225));+#3106 = VECTOR('',#3107,1.);+#3107 = DIRECTION('',(0.,-1.));+#3108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3109 = ADVANCED_FACE('',(#3110),#2747,.F.);+#3110 = FACE_BOUND('',#3111,.F.);+#3111 = EDGE_LOOP('',(#3112,#3135,#3136,#3137));+#3112 = ORIENTED_EDGE('',*,*,#3113,.T.);+#3113 = EDGE_CURVE('',#3114,#3065,#3116,.T.);+#3114 = VERTEX_POINT('',#3115);+#3115 = CARTESIAN_POINT('',(-2.4125,-1.225,0.15));+#3116 = SURFACE_CURVE('',#3117,(#3121,#3128),.PCURVE_S1.);+#3117 = LINE('',#3118,#3119);+#3118 = CARTESIAN_POINT('',(-2.4125,-1.225,0.15));+#3119 = VECTOR('',#3120,1.);+#3120 = DIRECTION('',(-1.,0.,0.));+#3121 = PCURVE('',#2747,#3122);+#3122 = DEFINITIONAL_REPRESENTATION('',(#3123),#3127);+#3123 = LINE('',#3124,#3125);+#3124 = CARTESIAN_POINT('',(0.,-0.225));+#3125 = VECTOR('',#3126,1.);+#3126 = DIRECTION('',(1.,0.));+#3127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3128 = PCURVE('',#2638,#3129);+#3129 = DEFINITIONAL_REPRESENTATION('',(#3130),#3134);+#3130 = LINE('',#3131,#3132);+#3131 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#3132 = VECTOR('',#3133,1.);+#3133 = DIRECTION('',(0.,-1.));+#3134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3135 = ORIENTED_EDGE('',*,*,#3089,.F.);+#3136 = ORIENTED_EDGE('',*,*,#2731,.F.);+#3137 = ORIENTED_EDGE('',*,*,#3138,.T.);+#3138 = EDGE_CURVE('',#2709,#3114,#3139,.T.);+#3139 = SURFACE_CURVE('',#3140,(#3144,#3151),.PCURVE_S1.);+#3140 = LINE('',#3141,#3142);+#3141 = CARTESIAN_POINT('',(-2.4125,-0.775,0.15));+#3142 = VECTOR('',#3143,1.);+#3143 = DIRECTION('',(0.,-1.,0.));+#3144 = PCURVE('',#2747,#3145);+#3145 = DEFINITIONAL_REPRESENTATION('',(#3146),#3150);+#3146 = LINE('',#3147,#3148);+#3147 = CARTESIAN_POINT('',(0.,0.225));+#3148 = VECTOR('',#3149,1.);+#3149 = DIRECTION('',(0.,-1.));+#3150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3151 = PCURVE('',#2666,#3152);+#3152 = DEFINITIONAL_REPRESENTATION('',(#3153),#3157);+#3153 = LINE('',#3154,#3155);+#3154 = CARTESIAN_POINT('',(0.784892508564,0.225));+#3155 = VECTOR('',#3156,1.);+#3156 = DIRECTION('',(-0.,-1.));+#3157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3158 = ADVANCED_FACE('',(#3159),#2666,.F.);+#3159 = FACE_BOUND('',#3160,.F.);+#3160 = EDGE_LOOP('',(#3161,#3182,#3183,#3184));+#3161 = ORIENTED_EDGE('',*,*,#3162,.T.);+#3162 = EDGE_CURVE('',#2623,#3114,#3163,.T.);+#3163 = SURFACE_CURVE('',#3164,(#3168,#3175),.PCURVE_S1.);+#3164 = LINE('',#3165,#3166);+#3165 = CARTESIAN_POINT('',(-2.1,-1.225,0.87));+#3166 = VECTOR('',#3167,1.);+#3167 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#3168 = PCURVE('',#2666,#3169);+#3169 = DEFINITIONAL_REPRESENTATION('',(#3170),#3174);+#3170 = LINE('',#3171,#3172);+#3171 = CARTESIAN_POINT('',(-0.,-0.225));+#3172 = VECTOR('',#3173,1.);+#3173 = DIRECTION('',(1.,0.));+#3174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3175 = PCURVE('',#2638,#3176);+#3176 = DEFINITIONAL_REPRESENTATION('',(#3177),#3181);+#3177 = LINE('',#3178,#3179);+#3178 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#3179 = VECTOR('',#3180,1.);+#3180 = DIRECTION('',(0.917323062896,-0.398143690493));+#3181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3182 = ORIENTED_EDGE('',*,*,#3138,.F.);+#3183 = ORIENTED_EDGE('',*,*,#2708,.F.);+#3184 = ORIENTED_EDGE('',*,*,#2650,.T.);+#3185 = ADVANCED_FACE('',(#3186),#2638,.T.);+#3186 = FACE_BOUND('',#3187,.T.);+#3187 = EDGE_LOOP('',(#3188,#3189,#3190,#3191,#3192,#3193,#3194,#3195));+#3188 = ORIENTED_EDGE('',*,*,#2622,.T.);+#3189 = ORIENTED_EDGE('',*,*,#3162,.T.);+#3190 = ORIENTED_EDGE('',*,*,#3113,.T.);+#3191 = ORIENTED_EDGE('',*,*,#3064,.T.);+#3192 = ORIENTED_EDGE('',*,*,#3015,.T.);+#3193 = ORIENTED_EDGE('',*,*,#2966,.T.);+#3194 = ORIENTED_EDGE('',*,*,#2918,.T.);+#3195 = ORIENTED_EDGE('',*,*,#3196,.T.);+#3196 = EDGE_CURVE('',#2919,#2588,#3197,.T.);+#3197 = SURFACE_CURVE('',#3198,(#3202,#3209),.PCURVE_S1.);+#3198 = LINE('',#3199,#3200);+#3199 = CARTESIAN_POINT('',(-1.9,-1.225,0.72));+#3200 = VECTOR('',#3201,1.);+#3201 = DIRECTION('',(0.,0.,1.));+#3202 = PCURVE('',#2638,#3203);+#3203 = DEFINITIONAL_REPRESENTATION('',(#3204),#3208);+#3204 = LINE('',#3205,#3206);+#3205 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#3206 = VECTOR('',#3207,1.);+#3207 = DIRECTION('',(-1.,0.));+#3208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3209 = PCURVE('',#2610,#3210);+#3210 = DEFINITIONAL_REPRESENTATION('',(#3211),#3215);+#3211 = LINE('',#3212,#3213);+#3212 = CARTESIAN_POINT('',(0.,-0.225));+#3213 = VECTOR('',#3214,1.);+#3214 = DIRECTION('',(1.,0.));+#3215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3216 = ADVANCED_FACE('',(#3217),#2610,.F.);+#3217 = FACE_BOUND('',#3218,.F.);+#3218 = EDGE_LOOP('',(#3219,#3220,#3221,#3222));+#3219 = ORIENTED_EDGE('',*,*,#2941,.F.);+#3220 = ORIENTED_EDGE('',*,*,#3196,.T.);+#3221 = ORIENTED_EDGE('',*,*,#2587,.T.);+#3222 = ORIENTED_EDGE('',*,*,#2871,.F.);+#3223 = MANIFOLD_SOLID_BREP('',#3224);+#3224 = CLOSED_SHELL('',(#3225,#3345,#3533,#3604,#3653,#3702,#3751,#3800+ ,#3827,#3858));+#3225 = ADVANCED_FACE('',(#3226),#3240,.F.);+#3226 = FACE_BOUND('',#3227,.F.);+#3227 = EDGE_LOOP('',(#3228,#3263,#3291,#3319));+#3228 = ORIENTED_EDGE('',*,*,#3229,.F.);+#3229 = EDGE_CURVE('',#3230,#3232,#3234,.T.);+#3230 = VERTEX_POINT('',#3231);+#3231 = CARTESIAN_POINT('',(-1.9,-2.225,0.87));+#3232 = VERTEX_POINT('',#3233);+#3233 = CARTESIAN_POINT('',(-1.9,-1.775,0.87));+#3234 = SURFACE_CURVE('',#3235,(#3239,#3251),.PCURVE_S1.);+#3235 = LINE('',#3236,#3237);+#3236 = CARTESIAN_POINT('',(-1.9,-2.225,0.87));+#3237 = VECTOR('',#3238,1.);+#3238 = DIRECTION('',(0.,1.,0.));+#3239 = PCURVE('',#3240,#3245);+#3240 = PLANE('',#3241);+#3241 = AXIS2_PLACEMENT_3D('',#3242,#3243,#3244);+#3242 = CARTESIAN_POINT('',(-1.9,-2.,0.87));+#3243 = DIRECTION('',(-0.,-0.,-1.));+#3244 = DIRECTION('',(-1.,0.,0.));+#3245 = DEFINITIONAL_REPRESENTATION('',(#3246),#3250);+#3246 = LINE('',#3247,#3248);+#3247 = CARTESIAN_POINT('',(0.,-0.225));+#3248 = VECTOR('',#3249,1.);+#3249 = DIRECTION('',(0.,1.));+#3250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3251 = PCURVE('',#3252,#3257);+#3252 = PLANE('',#3253);+#3253 = AXIS2_PLACEMENT_3D('',#3254,#3255,#3256);+#3254 = CARTESIAN_POINT('',(-1.9,-2.,0.72));+#3255 = DIRECTION('',(-1.,0.,0.));+#3256 = DIRECTION('',(0.,0.,1.));+#3257 = DEFINITIONAL_REPRESENTATION('',(#3258),#3262);+#3258 = LINE('',#3259,#3260);+#3259 = CARTESIAN_POINT('',(0.15,-0.225));+#3260 = VECTOR('',#3261,1.);+#3261 = DIRECTION('',(0.,1.));+#3262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3263 = ORIENTED_EDGE('',*,*,#3264,.T.);+#3264 = EDGE_CURVE('',#3230,#3265,#3267,.T.);+#3265 = VERTEX_POINT('',#3266);+#3266 = CARTESIAN_POINT('',(-2.1,-2.225,0.87));+#3267 = SURFACE_CURVE('',#3268,(#3272,#3279),.PCURVE_S1.);+#3268 = LINE('',#3269,#3270);+#3269 = CARTESIAN_POINT('',(-1.9,-2.225,0.87));+#3270 = VECTOR('',#3271,1.);+#3271 = DIRECTION('',(-1.,0.,0.));+#3272 = PCURVE('',#3240,#3273);+#3273 = DEFINITIONAL_REPRESENTATION('',(#3274),#3278);+#3274 = LINE('',#3275,#3276);+#3275 = CARTESIAN_POINT('',(0.,-0.225));+#3276 = VECTOR('',#3277,1.);+#3277 = DIRECTION('',(1.,0.));+#3278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3279 = PCURVE('',#3280,#3285);+#3280 = PLANE('',#3281);+#3281 = AXIS2_PLACEMENT_3D('',#3282,#3283,#3284);+#3282 = CARTESIAN_POINT('',(-2.38850950278,-2.225,0.318416529686));+#3283 = DIRECTION('',(-0.,-1.,-0.));+#3284 = DIRECTION('',(0.,0.,-1.));+#3285 = DEFINITIONAL_REPRESENTATION('',(#3286),#3290);+#3286 = LINE('',#3287,#3288);+#3287 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#3288 = VECTOR('',#3289,1.);+#3289 = DIRECTION('',(0.,-1.));+#3290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3291 = ORIENTED_EDGE('',*,*,#3292,.F.);+#3292 = EDGE_CURVE('',#3293,#3265,#3295,.T.);+#3293 = VERTEX_POINT('',#3294);+#3294 = CARTESIAN_POINT('',(-2.1,-1.775,0.87));+#3295 = SURFACE_CURVE('',#3296,(#3300,#3307),.PCURVE_S1.);+#3296 = LINE('',#3297,#3298);+#3297 = CARTESIAN_POINT('',(-2.1,-1.775,0.87));+#3298 = VECTOR('',#3299,1.);+#3299 = DIRECTION('',(0.,-1.,0.));+#3300 = PCURVE('',#3240,#3301);+#3301 = DEFINITIONAL_REPRESENTATION('',(#3302),#3306);+#3302 = LINE('',#3303,#3304);+#3303 = CARTESIAN_POINT('',(0.2,0.225));+#3304 = VECTOR('',#3305,1.);+#3305 = DIRECTION('',(0.,-1.));+#3306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3307 = PCURVE('',#3308,#3313);+#3308 = PLANE('',#3309);+#3309 = AXIS2_PLACEMENT_3D('',#3310,#3311,#3312);+#3310 = CARTESIAN_POINT('',(-2.1,-2.,0.87));+#3311 = DIRECTION('',(0.917323062896,0.,-0.398143690493));+#3312 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#3313 = DEFINITIONAL_REPRESENTATION('',(#3314),#3318);+#3314 = LINE('',#3315,#3316);+#3315 = CARTESIAN_POINT('',(0.,0.225));+#3316 = VECTOR('',#3317,1.);+#3317 = DIRECTION('',(-0.,-1.));+#3318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3319 = ORIENTED_EDGE('',*,*,#3320,.F.);+#3320 = EDGE_CURVE('',#3232,#3293,#3321,.T.);+#3321 = SURFACE_CURVE('',#3322,(#3326,#3333),.PCURVE_S1.);+#3322 = LINE('',#3323,#3324);+#3323 = CARTESIAN_POINT('',(-1.9,-1.775,0.87));+#3324 = VECTOR('',#3325,1.);+#3325 = DIRECTION('',(-1.,0.,0.));+#3326 = PCURVE('',#3240,#3327);+#3327 = DEFINITIONAL_REPRESENTATION('',(#3328),#3332);+#3328 = LINE('',#3329,#3330);+#3329 = CARTESIAN_POINT('',(0.,0.225));+#3330 = VECTOR('',#3331,1.);+#3331 = DIRECTION('',(1.,0.));+#3332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3333 = PCURVE('',#3334,#3339);+#3334 = PLANE('',#3335);+#3335 = AXIS2_PLACEMENT_3D('',#3336,#3337,#3338);+#3336 = CARTESIAN_POINT('',(-2.38850950278,-1.775,0.318416529686));+#3337 = DIRECTION('',(-0.,-1.,-0.));+#3338 = DIRECTION('',(0.,0.,-1.));+#3339 = DEFINITIONAL_REPRESENTATION('',(#3340),#3344);+#3340 = LINE('',#3341,#3342);+#3341 = CARTESIAN_POINT('',(-0.551583470314,0.48850950278));+#3342 = VECTOR('',#3343,1.);+#3343 = DIRECTION('',(0.,-1.));+#3344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3345 = ADVANCED_FACE('',(#3346),#3334,.F.);+#3346 = FACE_BOUND('',#3347,.F.);+#3347 = EDGE_LOOP('',(#3348,#3349,#3372,#3400,#3428,#3456,#3484,#3512));+#3348 = ORIENTED_EDGE('',*,*,#3320,.T.);+#3349 = ORIENTED_EDGE('',*,*,#3350,.T.);+#3350 = EDGE_CURVE('',#3293,#3351,#3353,.T.);+#3351 = VERTEX_POINT('',#3352);+#3352 = CARTESIAN_POINT('',(-2.4125,-1.775,0.15));+#3353 = SURFACE_CURVE('',#3354,(#3358,#3365),.PCURVE_S1.);+#3354 = LINE('',#3355,#3356);+#3355 = CARTESIAN_POINT('',(-2.1,-1.775,0.87));+#3356 = VECTOR('',#3357,1.);+#3357 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#3358 = PCURVE('',#3334,#3359);+#3359 = DEFINITIONAL_REPRESENTATION('',(#3360),#3364);+#3360 = LINE('',#3361,#3362);+#3361 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#3362 = VECTOR('',#3363,1.);+#3363 = DIRECTION('',(0.917323062896,-0.398143690493));+#3364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3365 = PCURVE('',#3308,#3366);+#3366 = DEFINITIONAL_REPRESENTATION('',(#3367),#3371);+#3367 = LINE('',#3368,#3369);+#3368 = CARTESIAN_POINT('',(0.,0.225));+#3369 = VECTOR('',#3370,1.);+#3370 = DIRECTION('',(1.,0.));+#3371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3372 = ORIENTED_EDGE('',*,*,#3373,.T.);+#3373 = EDGE_CURVE('',#3351,#3374,#3376,.T.);+#3374 = VERTEX_POINT('',#3375);+#3375 = CARTESIAN_POINT('',(-3.03,-1.775,0.15));+#3376 = SURFACE_CURVE('',#3377,(#3381,#3388),.PCURVE_S1.);+#3377 = LINE('',#3378,#3379);+#3378 = CARTESIAN_POINT('',(-2.4125,-1.775,0.15));+#3379 = VECTOR('',#3380,1.);+#3380 = DIRECTION('',(-1.,0.,0.));+#3381 = PCURVE('',#3334,#3382);+#3382 = DEFINITIONAL_REPRESENTATION('',(#3383),#3387);+#3383 = LINE('',#3384,#3385);+#3384 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#3385 = VECTOR('',#3386,1.);+#3386 = DIRECTION('',(0.,-1.));+#3387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3388 = PCURVE('',#3389,#3394);+#3389 = PLANE('',#3390);+#3390 = AXIS2_PLACEMENT_3D('',#3391,#3392,#3393);+#3391 = CARTESIAN_POINT('',(-2.4125,-2.,0.15));+#3392 = DIRECTION('',(-0.,-0.,-1.));+#3393 = DIRECTION('',(-1.,0.,0.));+#3394 = DEFINITIONAL_REPRESENTATION('',(#3395),#3399);+#3395 = LINE('',#3396,#3397);+#3396 = CARTESIAN_POINT('',(0.,0.225));+#3397 = VECTOR('',#3398,1.);+#3398 = DIRECTION('',(1.,0.));+#3399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3400 = ORIENTED_EDGE('',*,*,#3401,.T.);+#3401 = EDGE_CURVE('',#3374,#3402,#3404,.T.);+#3402 = VERTEX_POINT('',#3403);+#3403 = CARTESIAN_POINT('',(-3.03,-1.775,0.));+#3404 = SURFACE_CURVE('',#3405,(#3409,#3416),.PCURVE_S1.);+#3405 = LINE('',#3406,#3407);+#3406 = CARTESIAN_POINT('',(-3.03,-1.775,0.15));+#3407 = VECTOR('',#3408,1.);+#3408 = DIRECTION('',(0.,0.,-1.));+#3409 = PCURVE('',#3334,#3410);+#3410 = DEFINITIONAL_REPRESENTATION('',(#3411),#3415);+#3411 = LINE('',#3412,#3413);+#3412 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#3413 = VECTOR('',#3414,1.);+#3414 = DIRECTION('',(1.,0.));+#3415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3416 = PCURVE('',#3417,#3422);+#3417 = PLANE('',#3418);+#3418 = AXIS2_PLACEMENT_3D('',#3419,#3420,#3421);+#3419 = CARTESIAN_POINT('',(-3.03,-2.,0.15));+#3420 = DIRECTION('',(1.,0.,0.));+#3421 = DIRECTION('',(0.,0.,-1.));+#3422 = DEFINITIONAL_REPRESENTATION('',(#3423),#3427);+#3423 = LINE('',#3424,#3425);+#3424 = CARTESIAN_POINT('',(0.,0.225));+#3425 = VECTOR('',#3426,1.);+#3426 = DIRECTION('',(1.,0.));+#3427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3428 = ORIENTED_EDGE('',*,*,#3429,.T.);+#3429 = EDGE_CURVE('',#3402,#3430,#3432,.T.);+#3430 = VERTEX_POINT('',#3431);+#3431 = CARTESIAN_POINT('',(-2.2625,-1.775,0.));+#3432 = SURFACE_CURVE('',#3433,(#3437,#3444),.PCURVE_S1.);+#3433 = LINE('',#3434,#3435);+#3434 = CARTESIAN_POINT('',(-3.03,-1.775,0.));+#3435 = VECTOR('',#3436,1.);+#3436 = DIRECTION('',(1.,0.,0.));+#3437 = PCURVE('',#3334,#3438);+#3438 = DEFINITIONAL_REPRESENTATION('',(#3439),#3443);+#3439 = LINE('',#3440,#3441);+#3440 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#3441 = VECTOR('',#3442,1.);+#3442 = DIRECTION('',(0.,1.));+#3443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3444 = PCURVE('',#3445,#3450);+#3445 = PLANE('',#3446);+#3446 = AXIS2_PLACEMENT_3D('',#3447,#3448,#3449);+#3447 = CARTESIAN_POINT('',(-3.03,-2.,0.));+#3448 = DIRECTION('',(0.,0.,1.));+#3449 = DIRECTION('',(1.,0.,0.));+#3450 = DEFINITIONAL_REPRESENTATION('',(#3451),#3455);+#3451 = LINE('',#3452,#3453);+#3452 = CARTESIAN_POINT('',(0.,0.225));+#3453 = VECTOR('',#3454,1.);+#3454 = DIRECTION('',(1.,0.));+#3455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3456 = ORIENTED_EDGE('',*,*,#3457,.T.);+#3457 = EDGE_CURVE('',#3430,#3458,#3460,.T.);+#3458 = VERTEX_POINT('',#3459);+#3459 = CARTESIAN_POINT('',(-1.95,-1.775,0.72));+#3460 = SURFACE_CURVE('',#3461,(#3465,#3472),.PCURVE_S1.);+#3461 = LINE('',#3462,#3463);+#3462 = CARTESIAN_POINT('',(-2.2625,-1.775,0.));+#3463 = VECTOR('',#3464,1.);+#3464 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#3465 = PCURVE('',#3334,#3466);+#3466 = DEFINITIONAL_REPRESENTATION('',(#3467),#3471);+#3467 = LINE('',#3468,#3469);+#3468 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#3469 = VECTOR('',#3470,1.);+#3470 = DIRECTION('',(-0.917323062896,0.398143690493));+#3471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3472 = PCURVE('',#3473,#3478);+#3473 = PLANE('',#3474);+#3474 = AXIS2_PLACEMENT_3D('',#3475,#3476,#3477);+#3475 = CARTESIAN_POINT('',(-2.2625,-2.,0.));+#3476 = DIRECTION('',(-0.917323062896,0.,0.398143690493));+#3477 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#3478 = DEFINITIONAL_REPRESENTATION('',(#3479),#3483);+#3479 = LINE('',#3480,#3481);+#3480 = CARTESIAN_POINT('',(0.,0.225));+#3481 = VECTOR('',#3482,1.);+#3482 = DIRECTION('',(1.,0.));+#3483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3484 = ORIENTED_EDGE('',*,*,#3485,.T.);+#3485 = EDGE_CURVE('',#3458,#3486,#3488,.T.);+#3486 = VERTEX_POINT('',#3487);+#3487 = CARTESIAN_POINT('',(-1.9,-1.775,0.72));+#3488 = SURFACE_CURVE('',#3489,(#3493,#3500),.PCURVE_S1.);+#3489 = LINE('',#3490,#3491);+#3490 = CARTESIAN_POINT('',(-1.95,-1.775,0.72));+#3491 = VECTOR('',#3492,1.);+#3492 = DIRECTION('',(1.,0.,0.));+#3493 = PCURVE('',#3334,#3494);+#3494 = DEFINITIONAL_REPRESENTATION('',(#3495),#3499);+#3495 = LINE('',#3496,#3497);+#3496 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#3497 = VECTOR('',#3498,1.);+#3498 = DIRECTION('',(0.,1.));+#3499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3500 = PCURVE('',#3501,#3506);+#3501 = PLANE('',#3502);+#3502 = AXIS2_PLACEMENT_3D('',#3503,#3504,#3505);+#3503 = CARTESIAN_POINT('',(-1.95,-2.,0.72));+#3504 = DIRECTION('',(0.,0.,1.));+#3505 = DIRECTION('',(1.,0.,0.));+#3506 = DEFINITIONAL_REPRESENTATION('',(#3507),#3511);+#3507 = LINE('',#3508,#3509);+#3508 = CARTESIAN_POINT('',(0.,0.225));+#3509 = VECTOR('',#3510,1.);+#3510 = DIRECTION('',(1.,0.));+#3511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3512 = ORIENTED_EDGE('',*,*,#3513,.T.);+#3513 = EDGE_CURVE('',#3486,#3232,#3514,.T.);+#3514 = SURFACE_CURVE('',#3515,(#3519,#3526),.PCURVE_S1.);+#3515 = LINE('',#3516,#3517);+#3516 = CARTESIAN_POINT('',(-1.9,-1.775,0.72));+#3517 = VECTOR('',#3518,1.);+#3518 = DIRECTION('',(0.,0.,1.));+#3519 = PCURVE('',#3334,#3520);+#3520 = DEFINITIONAL_REPRESENTATION('',(#3521),#3525);+#3521 = LINE('',#3522,#3523);+#3522 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#3523 = VECTOR('',#3524,1.);+#3524 = DIRECTION('',(-1.,0.));+#3525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3526 = PCURVE('',#3252,#3527);+#3527 = DEFINITIONAL_REPRESENTATION('',(#3528),#3532);+#3528 = LINE('',#3529,#3530);+#3529 = CARTESIAN_POINT('',(0.,0.225));+#3530 = VECTOR('',#3531,1.);+#3531 = DIRECTION('',(1.,0.));+#3532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3533 = ADVANCED_FACE('',(#3534),#3501,.F.);+#3534 = FACE_BOUND('',#3535,.F.);+#3535 = EDGE_LOOP('',(#3536,#3559,#3582,#3603));+#3536 = ORIENTED_EDGE('',*,*,#3537,.F.);+#3537 = EDGE_CURVE('',#3538,#3458,#3540,.T.);+#3538 = VERTEX_POINT('',#3539);+#3539 = CARTESIAN_POINT('',(-1.95,-2.225,0.72));+#3540 = SURFACE_CURVE('',#3541,(#3545,#3552),.PCURVE_S1.);+#3541 = LINE('',#3542,#3543);+#3542 = CARTESIAN_POINT('',(-1.95,-2.225,0.72));+#3543 = VECTOR('',#3544,1.);+#3544 = DIRECTION('',(0.,1.,0.));+#3545 = PCURVE('',#3501,#3546);+#3546 = DEFINITIONAL_REPRESENTATION('',(#3547),#3551);+#3547 = LINE('',#3548,#3549);+#3548 = CARTESIAN_POINT('',(0.,-0.225));+#3549 = VECTOR('',#3550,1.);+#3550 = DIRECTION('',(0.,1.));+#3551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3552 = PCURVE('',#3473,#3553);+#3553 = DEFINITIONAL_REPRESENTATION('',(#3554),#3558);+#3554 = LINE('',#3555,#3556);+#3555 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#3556 = VECTOR('',#3557,1.);+#3557 = DIRECTION('',(0.,1.));+#3558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3559 = ORIENTED_EDGE('',*,*,#3560,.T.);+#3560 = EDGE_CURVE('',#3538,#3561,#3563,.T.);+#3561 = VERTEX_POINT('',#3562);+#3562 = CARTESIAN_POINT('',(-1.9,-2.225,0.72));+#3563 = SURFACE_CURVE('',#3564,(#3568,#3575),.PCURVE_S1.);+#3564 = LINE('',#3565,#3566);+#3565 = CARTESIAN_POINT('',(-1.95,-2.225,0.72));+#3566 = VECTOR('',#3567,1.);+#3567 = DIRECTION('',(1.,0.,0.));+#3568 = PCURVE('',#3501,#3569);+#3569 = DEFINITIONAL_REPRESENTATION('',(#3570),#3574);+#3570 = LINE('',#3571,#3572);+#3571 = CARTESIAN_POINT('',(0.,-0.225));+#3572 = VECTOR('',#3573,1.);+#3573 = DIRECTION('',(1.,0.));+#3574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3575 = PCURVE('',#3280,#3576);+#3576 = DEFINITIONAL_REPRESENTATION('',(#3577),#3581);+#3577 = LINE('',#3578,#3579);+#3578 = CARTESIAN_POINT('',(-0.401583470314,0.43850950278));+#3579 = VECTOR('',#3580,1.);+#3580 = DIRECTION('',(0.,1.));+#3581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3582 = ORIENTED_EDGE('',*,*,#3583,.T.);+#3583 = EDGE_CURVE('',#3561,#3486,#3584,.T.);+#3584 = SURFACE_CURVE('',#3585,(#3589,#3596),.PCURVE_S1.);+#3585 = LINE('',#3586,#3587);+#3586 = CARTESIAN_POINT('',(-1.9,-2.225,0.72));+#3587 = VECTOR('',#3588,1.);+#3588 = DIRECTION('',(0.,1.,0.));+#3589 = PCURVE('',#3501,#3590);+#3590 = DEFINITIONAL_REPRESENTATION('',(#3591),#3595);+#3591 = LINE('',#3592,#3593);+#3592 = CARTESIAN_POINT('',(5.E-02,-0.225));+#3593 = VECTOR('',#3594,1.);+#3594 = DIRECTION('',(0.,1.));+#3595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3596 = PCURVE('',#3252,#3597);+#3597 = DEFINITIONAL_REPRESENTATION('',(#3598),#3602);+#3598 = LINE('',#3599,#3600);+#3599 = CARTESIAN_POINT('',(0.,-0.225));+#3600 = VECTOR('',#3601,1.);+#3601 = DIRECTION('',(0.,1.));+#3602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3603 = ORIENTED_EDGE('',*,*,#3485,.F.);+#3604 = ADVANCED_FACE('',(#3605),#3473,.F.);+#3605 = FACE_BOUND('',#3606,.F.);+#3606 = EDGE_LOOP('',(#3607,#3630,#3631,#3632));+#3607 = ORIENTED_EDGE('',*,*,#3608,.T.);+#3608 = EDGE_CURVE('',#3609,#3538,#3611,.T.);+#3609 = VERTEX_POINT('',#3610);+#3610 = CARTESIAN_POINT('',(-2.2625,-2.225,0.));+#3611 = SURFACE_CURVE('',#3612,(#3616,#3623),.PCURVE_S1.);+#3612 = LINE('',#3613,#3614);+#3613 = CARTESIAN_POINT('',(-2.2625,-2.225,0.));+#3614 = VECTOR('',#3615,1.);+#3615 = DIRECTION('',(0.398143690493,0.,0.917323062896));+#3616 = PCURVE('',#3473,#3617);+#3617 = DEFINITIONAL_REPRESENTATION('',(#3618),#3622);+#3618 = LINE('',#3619,#3620);+#3619 = CARTESIAN_POINT('',(0.,-0.225));+#3620 = VECTOR('',#3621,1.);+#3621 = DIRECTION('',(1.,0.));+#3622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3623 = PCURVE('',#3280,#3624);+#3624 = DEFINITIONAL_REPRESENTATION('',(#3625),#3629);+#3625 = LINE('',#3626,#3627);+#3626 = CARTESIAN_POINT('',(0.318416529686,0.12600950278));+#3627 = VECTOR('',#3628,1.);+#3628 = DIRECTION('',(-0.917323062896,0.398143690493));+#3629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3630 = ORIENTED_EDGE('',*,*,#3537,.T.);+#3631 = ORIENTED_EDGE('',*,*,#3457,.F.);+#3632 = ORIENTED_EDGE('',*,*,#3633,.T.);+#3633 = EDGE_CURVE('',#3430,#3609,#3634,.T.);+#3634 = SURFACE_CURVE('',#3635,(#3639,#3646),.PCURVE_S1.);+#3635 = LINE('',#3636,#3637);+#3636 = CARTESIAN_POINT('',(-2.2625,-1.775,0.));+#3637 = VECTOR('',#3638,1.);+#3638 = DIRECTION('',(0.,-1.,0.));+#3639 = PCURVE('',#3473,#3640);+#3640 = DEFINITIONAL_REPRESENTATION('',(#3641),#3645);+#3641 = LINE('',#3642,#3643);+#3642 = CARTESIAN_POINT('',(0.,0.225));+#3643 = VECTOR('',#3644,1.);+#3644 = DIRECTION('',(0.,-1.));+#3645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3646 = PCURVE('',#3445,#3647);+#3647 = DEFINITIONAL_REPRESENTATION('',(#3648),#3652);+#3648 = LINE('',#3649,#3650);+#3649 = CARTESIAN_POINT('',(0.7675,0.225));+#3650 = VECTOR('',#3651,1.);+#3651 = DIRECTION('',(0.,-1.));+#3652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3653 = ADVANCED_FACE('',(#3654),#3445,.F.);+#3654 = FACE_BOUND('',#3655,.F.);+#3655 = EDGE_LOOP('',(#3656,#3679,#3680,#3681));+#3656 = ORIENTED_EDGE('',*,*,#3657,.T.);+#3657 = EDGE_CURVE('',#3658,#3609,#3660,.T.);+#3658 = VERTEX_POINT('',#3659);+#3659 = CARTESIAN_POINT('',(-3.03,-2.225,0.));+#3660 = SURFACE_CURVE('',#3661,(#3665,#3672),.PCURVE_S1.);+#3661 = LINE('',#3662,#3663);+#3662 = CARTESIAN_POINT('',(-3.03,-2.225,0.));+#3663 = VECTOR('',#3664,1.);+#3664 = DIRECTION('',(1.,0.,0.));+#3665 = PCURVE('',#3445,#3666);+#3666 = DEFINITIONAL_REPRESENTATION('',(#3667),#3671);+#3667 = LINE('',#3668,#3669);+#3668 = CARTESIAN_POINT('',(0.,-0.225));+#3669 = VECTOR('',#3670,1.);+#3670 = DIRECTION('',(1.,0.));+#3671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3672 = PCURVE('',#3280,#3673);+#3673 = DEFINITIONAL_REPRESENTATION('',(#3674),#3678);+#3674 = LINE('',#3675,#3676);+#3675 = CARTESIAN_POINT('',(0.318416529686,-0.64149049722));+#3676 = VECTOR('',#3677,1.);+#3677 = DIRECTION('',(0.,1.));+#3678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3679 = ORIENTED_EDGE('',*,*,#3633,.F.);+#3680 = ORIENTED_EDGE('',*,*,#3429,.F.);+#3681 = ORIENTED_EDGE('',*,*,#3682,.T.);+#3682 = EDGE_CURVE('',#3402,#3658,#3683,.T.);+#3683 = SURFACE_CURVE('',#3684,(#3688,#3695),.PCURVE_S1.);+#3684 = LINE('',#3685,#3686);+#3685 = CARTESIAN_POINT('',(-3.03,-1.775,0.));+#3686 = VECTOR('',#3687,1.);+#3687 = DIRECTION('',(0.,-1.,0.));+#3688 = PCURVE('',#3445,#3689);+#3689 = DEFINITIONAL_REPRESENTATION('',(#3690),#3694);+#3690 = LINE('',#3691,#3692);+#3691 = CARTESIAN_POINT('',(0.,0.225));+#3692 = VECTOR('',#3693,1.);+#3693 = DIRECTION('',(0.,-1.));+#3694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3695 = PCURVE('',#3417,#3696);+#3696 = DEFINITIONAL_REPRESENTATION('',(#3697),#3701);+#3697 = LINE('',#3698,#3699);+#3698 = CARTESIAN_POINT('',(0.15,0.225));+#3699 = VECTOR('',#3700,1.);+#3700 = DIRECTION('',(0.,-1.));+#3701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3702 = ADVANCED_FACE('',(#3703),#3417,.F.);+#3703 = FACE_BOUND('',#3704,.F.);+#3704 = EDGE_LOOP('',(#3705,#3728,#3729,#3730));+#3705 = ORIENTED_EDGE('',*,*,#3706,.T.);+#3706 = EDGE_CURVE('',#3707,#3658,#3709,.T.);+#3707 = VERTEX_POINT('',#3708);+#3708 = CARTESIAN_POINT('',(-3.03,-2.225,0.15));+#3709 = SURFACE_CURVE('',#3710,(#3714,#3721),.PCURVE_S1.);+#3710 = LINE('',#3711,#3712);+#3711 = CARTESIAN_POINT('',(-3.03,-2.225,0.15));+#3712 = VECTOR('',#3713,1.);+#3713 = DIRECTION('',(0.,0.,-1.));+#3714 = PCURVE('',#3417,#3715);+#3715 = DEFINITIONAL_REPRESENTATION('',(#3716),#3720);+#3716 = LINE('',#3717,#3718);+#3717 = CARTESIAN_POINT('',(0.,-0.225));+#3718 = VECTOR('',#3719,1.);+#3719 = DIRECTION('',(1.,0.));+#3720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3721 = PCURVE('',#3280,#3722);+#3722 = DEFINITIONAL_REPRESENTATION('',(#3723),#3727);+#3723 = LINE('',#3724,#3725);+#3724 = CARTESIAN_POINT('',(0.168416529686,-0.64149049722));+#3725 = VECTOR('',#3726,1.);+#3726 = DIRECTION('',(1.,0.));+#3727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3728 = ORIENTED_EDGE('',*,*,#3682,.F.);+#3729 = ORIENTED_EDGE('',*,*,#3401,.F.);+#3730 = ORIENTED_EDGE('',*,*,#3731,.T.);+#3731 = EDGE_CURVE('',#3374,#3707,#3732,.T.);+#3732 = SURFACE_CURVE('',#3733,(#3737,#3744),.PCURVE_S1.);+#3733 = LINE('',#3734,#3735);+#3734 = CARTESIAN_POINT('',(-3.03,-1.775,0.15));+#3735 = VECTOR('',#3736,1.);+#3736 = DIRECTION('',(0.,-1.,0.));+#3737 = PCURVE('',#3417,#3738);+#3738 = DEFINITIONAL_REPRESENTATION('',(#3739),#3743);+#3739 = LINE('',#3740,#3741);+#3740 = CARTESIAN_POINT('',(0.,0.225));+#3741 = VECTOR('',#3742,1.);+#3742 = DIRECTION('',(0.,-1.));+#3743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3744 = PCURVE('',#3389,#3745);+#3745 = DEFINITIONAL_REPRESENTATION('',(#3746),#3750);+#3746 = LINE('',#3747,#3748);+#3747 = CARTESIAN_POINT('',(0.6175,0.225));+#3748 = VECTOR('',#3749,1.);+#3749 = DIRECTION('',(0.,-1.));+#3750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3751 = ADVANCED_FACE('',(#3752),#3389,.F.);+#3752 = FACE_BOUND('',#3753,.F.);+#3753 = EDGE_LOOP('',(#3754,#3777,#3778,#3779));+#3754 = ORIENTED_EDGE('',*,*,#3755,.T.);+#3755 = EDGE_CURVE('',#3756,#3707,#3758,.T.);+#3756 = VERTEX_POINT('',#3757);+#3757 = CARTESIAN_POINT('',(-2.4125,-2.225,0.15));+#3758 = SURFACE_CURVE('',#3759,(#3763,#3770),.PCURVE_S1.);+#3759 = LINE('',#3760,#3761);+#3760 = CARTESIAN_POINT('',(-2.4125,-2.225,0.15));+#3761 = VECTOR('',#3762,1.);+#3762 = DIRECTION('',(-1.,0.,0.));+#3763 = PCURVE('',#3389,#3764);+#3764 = DEFINITIONAL_REPRESENTATION('',(#3765),#3769);+#3765 = LINE('',#3766,#3767);+#3766 = CARTESIAN_POINT('',(0.,-0.225));+#3767 = VECTOR('',#3768,1.);+#3768 = DIRECTION('',(1.,0.));+#3769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3770 = PCURVE('',#3280,#3771);+#3771 = DEFINITIONAL_REPRESENTATION('',(#3772),#3776);+#3772 = LINE('',#3773,#3774);+#3773 = CARTESIAN_POINT('',(0.168416529686,-2.399049722E-02));+#3774 = VECTOR('',#3775,1.);+#3775 = DIRECTION('',(0.,-1.));+#3776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3777 = ORIENTED_EDGE('',*,*,#3731,.F.);+#3778 = ORIENTED_EDGE('',*,*,#3373,.F.);+#3779 = ORIENTED_EDGE('',*,*,#3780,.T.);+#3780 = EDGE_CURVE('',#3351,#3756,#3781,.T.);+#3781 = SURFACE_CURVE('',#3782,(#3786,#3793),.PCURVE_S1.);+#3782 = LINE('',#3783,#3784);+#3783 = CARTESIAN_POINT('',(-2.4125,-1.775,0.15));+#3784 = VECTOR('',#3785,1.);+#3785 = DIRECTION('',(0.,-1.,0.));+#3786 = PCURVE('',#3389,#3787);+#3787 = DEFINITIONAL_REPRESENTATION('',(#3788),#3792);+#3788 = LINE('',#3789,#3790);+#3789 = CARTESIAN_POINT('',(0.,0.225));+#3790 = VECTOR('',#3791,1.);+#3791 = DIRECTION('',(0.,-1.));+#3792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3793 = PCURVE('',#3308,#3794);+#3794 = DEFINITIONAL_REPRESENTATION('',(#3795),#3799);+#3795 = LINE('',#3796,#3797);+#3796 = CARTESIAN_POINT('',(0.784892508564,0.225));+#3797 = VECTOR('',#3798,1.);+#3798 = DIRECTION('',(-0.,-1.));+#3799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3800 = ADVANCED_FACE('',(#3801),#3308,.F.);+#3801 = FACE_BOUND('',#3802,.F.);+#3802 = EDGE_LOOP('',(#3803,#3824,#3825,#3826));+#3803 = ORIENTED_EDGE('',*,*,#3804,.T.);+#3804 = EDGE_CURVE('',#3265,#3756,#3805,.T.);+#3805 = SURFACE_CURVE('',#3806,(#3810,#3817),.PCURVE_S1.);+#3806 = LINE('',#3807,#3808);+#3807 = CARTESIAN_POINT('',(-2.1,-2.225,0.87));+#3808 = VECTOR('',#3809,1.);+#3809 = DIRECTION('',(-0.398143690493,0.,-0.917323062896));+#3810 = PCURVE('',#3308,#3811);+#3811 = DEFINITIONAL_REPRESENTATION('',(#3812),#3816);+#3812 = LINE('',#3813,#3814);+#3813 = CARTESIAN_POINT('',(-0.,-0.225));+#3814 = VECTOR('',#3815,1.);+#3815 = DIRECTION('',(1.,0.));+#3816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3817 = PCURVE('',#3280,#3818);+#3818 = DEFINITIONAL_REPRESENTATION('',(#3819),#3823);+#3819 = LINE('',#3820,#3821);+#3820 = CARTESIAN_POINT('',(-0.551583470314,0.28850950278));+#3821 = VECTOR('',#3822,1.);+#3822 = DIRECTION('',(0.917323062896,-0.398143690493));+#3823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3824 = ORIENTED_EDGE('',*,*,#3780,.F.);+#3825 = ORIENTED_EDGE('',*,*,#3350,.F.);+#3826 = ORIENTED_EDGE('',*,*,#3292,.T.);+#3827 = ADVANCED_FACE('',(#3828),#3280,.T.);+#3828 = FACE_BOUND('',#3829,.T.);+#3829 = EDGE_LOOP('',(#3830,#3831,#3832,#3833,#3834,#3835,#3836,#3837));+#3830 = ORIENTED_EDGE('',*,*,#3264,.T.);+#3831 = ORIENTED_EDGE('',*,*,#3804,.T.);+#3832 = ORIENTED_EDGE('',*,*,#3755,.T.);+#3833 = ORIENTED_EDGE('',*,*,#3706,.T.);+#3834 = ORIENTED_EDGE('',*,*,#3657,.T.);+#3835 = ORIENTED_EDGE('',*,*,#3608,.T.);+#3836 = ORIENTED_EDGE('',*,*,#3560,.T.);+#3837 = ORIENTED_EDGE('',*,*,#3838,.T.);+#3838 = EDGE_CURVE('',#3561,#3230,#3839,.T.);+#3839 = SURFACE_CURVE('',#3840,(#3844,#3851),.PCURVE_S1.);+#3840 = LINE('',#3841,#3842);+#3841 = CARTESIAN_POINT('',(-1.9,-2.225,0.72));+#3842 = VECTOR('',#3843,1.);+#3843 = DIRECTION('',(0.,0.,1.));+#3844 = PCURVE('',#3280,#3845);+#3845 = DEFINITIONAL_REPRESENTATION('',(#3846),#3850);+#3846 = LINE('',#3847,#3848);+#3847 = CARTESIAN_POINT('',(-0.401583470314,0.48850950278));+#3848 = VECTOR('',#3849,1.);+#3849 = DIRECTION('',(-1.,0.));+#3850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3851 = PCURVE('',#3252,#3852);+#3852 = DEFINITIONAL_REPRESENTATION('',(#3853),#3857);+#3853 = LINE('',#3854,#3855);+#3854 = CARTESIAN_POINT('',(0.,-0.225));+#3855 = VECTOR('',#3856,1.);+#3856 = DIRECTION('',(1.,0.));+#3857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3858 = ADVANCED_FACE('',(#3859),#3252,.F.);+#3859 = FACE_BOUND('',#3860,.F.);+#3860 = EDGE_LOOP('',(#3861,#3862,#3863,#3864));+#3861 = ORIENTED_EDGE('',*,*,#3583,.F.);+#3862 = ORIENTED_EDGE('',*,*,#3838,.T.);+#3863 = ORIENTED_EDGE('',*,*,#3229,.T.);+#3864 = ORIENTED_EDGE('',*,*,#3513,.F.);+#3865 = MANIFOLD_SOLID_BREP('',#3866);+#3866 = CLOSED_SHELL('',(#3867,#3987,#4063,#4139,#4215,#4291,#4367,#4438+ ,#4469,#4496));+#3867 = ADVANCED_FACE('',(#3868),#3882,.T.);+#3868 = FACE_BOUND('',#3869,.T.);+#3869 = EDGE_LOOP('',(#3870,#3905,#3933,#3961));+#3870 = ORIENTED_EDGE('',*,*,#3871,.T.);+#3871 = EDGE_CURVE('',#3872,#3874,#3876,.T.);+#3872 = VERTEX_POINT('',#3873);+#3873 = CARTESIAN_POINT('',(1.9,-2.225,0.87));+#3874 = VERTEX_POINT('',#3875);+#3875 = CARTESIAN_POINT('',(2.1,-2.225,0.87));+#3876 = SURFACE_CURVE('',#3877,(#3881,#3893),.PCURVE_S1.);+#3877 = LINE('',#3878,#3879);+#3878 = CARTESIAN_POINT('',(1.9,-2.225,0.87));+#3879 = VECTOR('',#3880,1.);+#3880 = DIRECTION('',(1.,0.,0.));+#3881 = PCURVE('',#3882,#3887);+#3882 = PLANE('',#3883);+#3883 = AXIS2_PLACEMENT_3D('',#3884,#3885,#3886);+#3884 = CARTESIAN_POINT('',(1.9,-2.,0.87));+#3885 = DIRECTION('',(0.,0.,1.));+#3886 = DIRECTION('',(1.,0.,0.));+#3887 = DEFINITIONAL_REPRESENTATION('',(#3888),#3892);+#3888 = LINE('',#3889,#3890);+#3889 = CARTESIAN_POINT('',(0.,-0.225));+#3890 = VECTOR('',#3891,1.);+#3891 = DIRECTION('',(1.,0.));+#3892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3893 = PCURVE('',#3894,#3899);+#3894 = PLANE('',#3895);+#3895 = AXIS2_PLACEMENT_3D('',#3896,#3897,#3898);+#3896 = CARTESIAN_POINT('',(2.38850950278,-2.225,0.318416529686));+#3897 = DIRECTION('',(0.,1.,0.));+#3898 = DIRECTION('',(0.,0.,1.));+#3899 = DEFINITIONAL_REPRESENTATION('',(#3900),#3904);+#3900 = LINE('',#3901,#3902);+#3901 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#3902 = VECTOR('',#3903,1.);+#3903 = DIRECTION('',(0.,1.));+#3904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3905 = ORIENTED_EDGE('',*,*,#3906,.T.);+#3906 = EDGE_CURVE('',#3874,#3907,#3909,.T.);+#3907 = VERTEX_POINT('',#3908);+#3908 = CARTESIAN_POINT('',(2.1,-1.775,0.87));+#3909 = SURFACE_CURVE('',#3910,(#3914,#3921),.PCURVE_S1.);+#3910 = LINE('',#3911,#3912);+#3911 = CARTESIAN_POINT('',(2.1,-2.225,0.87));+#3912 = VECTOR('',#3913,1.);+#3913 = DIRECTION('',(0.,1.,0.));+#3914 = PCURVE('',#3882,#3915);+#3915 = DEFINITIONAL_REPRESENTATION('',(#3916),#3920);+#3916 = LINE('',#3917,#3918);+#3917 = CARTESIAN_POINT('',(0.2,-0.225));+#3918 = VECTOR('',#3919,1.);+#3919 = DIRECTION('',(0.,1.));+#3920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3921 = PCURVE('',#3922,#3927);+#3922 = PLANE('',#3923);+#3923 = AXIS2_PLACEMENT_3D('',#3924,#3925,#3926);+#3924 = CARTESIAN_POINT('',(2.1,-2.,0.87));+#3925 = DIRECTION('',(0.917323062896,0.,0.398143690493));+#3926 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#3927 = DEFINITIONAL_REPRESENTATION('',(#3928),#3932);+#3928 = LINE('',#3929,#3930);+#3929 = CARTESIAN_POINT('',(0.,-0.225));+#3930 = VECTOR('',#3931,1.);+#3931 = DIRECTION('',(0.,1.));+#3932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3933 = ORIENTED_EDGE('',*,*,#3934,.F.);+#3934 = EDGE_CURVE('',#3935,#3907,#3937,.T.);+#3935 = VERTEX_POINT('',#3936);+#3936 = CARTESIAN_POINT('',(1.9,-1.775,0.87));+#3937 = SURFACE_CURVE('',#3938,(#3942,#3949),.PCURVE_S1.);+#3938 = LINE('',#3939,#3940);+#3939 = CARTESIAN_POINT('',(1.9,-1.775,0.87));+#3940 = VECTOR('',#3941,1.);+#3941 = DIRECTION('',(1.,0.,0.));+#3942 = PCURVE('',#3882,#3943);+#3943 = DEFINITIONAL_REPRESENTATION('',(#3944),#3948);+#3944 = LINE('',#3945,#3946);+#3945 = CARTESIAN_POINT('',(0.,0.225));+#3946 = VECTOR('',#3947,1.);+#3947 = DIRECTION('',(1.,0.));+#3948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3949 = PCURVE('',#3950,#3955);+#3950 = PLANE('',#3951);+#3951 = AXIS2_PLACEMENT_3D('',#3952,#3953,#3954);+#3952 = CARTESIAN_POINT('',(2.38850950278,-1.775,0.318416529686));+#3953 = DIRECTION('',(0.,1.,0.));+#3954 = DIRECTION('',(0.,0.,1.));+#3955 = DEFINITIONAL_REPRESENTATION('',(#3956),#3960);+#3956 = LINE('',#3957,#3958);+#3957 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#3958 = VECTOR('',#3959,1.);+#3959 = DIRECTION('',(0.,1.));+#3960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3961 = ORIENTED_EDGE('',*,*,#3962,.T.);+#3962 = EDGE_CURVE('',#3935,#3872,#3963,.T.);+#3963 = SURFACE_CURVE('',#3964,(#3968,#3975),.PCURVE_S1.);+#3964 = LINE('',#3965,#3966);+#3965 = CARTESIAN_POINT('',(1.9,-1.775,0.87));+#3966 = VECTOR('',#3967,1.);+#3967 = DIRECTION('',(0.,-1.,0.));+#3968 = PCURVE('',#3882,#3969);+#3969 = DEFINITIONAL_REPRESENTATION('',(#3970),#3974);+#3970 = LINE('',#3971,#3972);+#3971 = CARTESIAN_POINT('',(0.,0.225));+#3972 = VECTOR('',#3973,1.);+#3973 = DIRECTION('',(0.,-1.));+#3974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3975 = PCURVE('',#3976,#3981);+#3976 = PLANE('',#3977);+#3977 = AXIS2_PLACEMENT_3D('',#3978,#3979,#3980);+#3978 = CARTESIAN_POINT('',(1.9,-2.,0.72));+#3979 = DIRECTION('',(-1.,0.,0.));+#3980 = DIRECTION('',(0.,0.,1.));+#3981 = DEFINITIONAL_REPRESENTATION('',(#3982),#3986);+#3982 = LINE('',#3983,#3984);+#3983 = CARTESIAN_POINT('',(0.15,0.225));+#3984 = VECTOR('',#3985,1.);+#3985 = DIRECTION('',(0.,-1.));+#3986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#3987 = ADVANCED_FACE('',(#3988),#3976,.T.);+#3988 = FACE_BOUND('',#3989,.T.);+#3989 = EDGE_LOOP('',(#3990,#4013,#4014,#4037));+#3990 = ORIENTED_EDGE('',*,*,#3991,.T.);+#3991 = EDGE_CURVE('',#3992,#3872,#3994,.T.);+#3992 = VERTEX_POINT('',#3993);+#3993 = CARTESIAN_POINT('',(1.9,-2.225,0.72));+#3994 = SURFACE_CURVE('',#3995,(#3999,#4006),.PCURVE_S1.);+#3995 = LINE('',#3996,#3997);+#3996 = CARTESIAN_POINT('',(1.9,-2.225,0.72));+#3997 = VECTOR('',#3998,1.);+#3998 = DIRECTION('',(0.,0.,1.));+#3999 = PCURVE('',#3976,#4000);+#4000 = DEFINITIONAL_REPRESENTATION('',(#4001),#4005);+#4001 = LINE('',#4002,#4003);+#4002 = CARTESIAN_POINT('',(0.,-0.225));+#4003 = VECTOR('',#4004,1.);+#4004 = DIRECTION('',(1.,0.));+#4005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4006 = PCURVE('',#3894,#4007);+#4007 = DEFINITIONAL_REPRESENTATION('',(#4008),#4012);+#4008 = LINE('',#4009,#4010);+#4009 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#4010 = VECTOR('',#4011,1.);+#4011 = DIRECTION('',(1.,0.));+#4012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4013 = ORIENTED_EDGE('',*,*,#3962,.F.);+#4014 = ORIENTED_EDGE('',*,*,#4015,.F.);+#4015 = EDGE_CURVE('',#4016,#3935,#4018,.T.);+#4016 = VERTEX_POINT('',#4017);+#4017 = CARTESIAN_POINT('',(1.9,-1.775,0.72));+#4018 = SURFACE_CURVE('',#4019,(#4023,#4030),.PCURVE_S1.);+#4019 = LINE('',#4020,#4021);+#4020 = CARTESIAN_POINT('',(1.9,-1.775,0.72));+#4021 = VECTOR('',#4022,1.);+#4022 = DIRECTION('',(0.,0.,1.));+#4023 = PCURVE('',#3976,#4024);+#4024 = DEFINITIONAL_REPRESENTATION('',(#4025),#4029);+#4025 = LINE('',#4026,#4027);+#4026 = CARTESIAN_POINT('',(0.,0.225));+#4027 = VECTOR('',#4028,1.);+#4028 = DIRECTION('',(1.,0.));+#4029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4030 = PCURVE('',#3950,#4031);+#4031 = DEFINITIONAL_REPRESENTATION('',(#4032),#4036);+#4032 = LINE('',#4033,#4034);+#4033 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#4034 = VECTOR('',#4035,1.);+#4035 = DIRECTION('',(1.,0.));+#4036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4037 = ORIENTED_EDGE('',*,*,#4038,.T.);+#4038 = EDGE_CURVE('',#4016,#3992,#4039,.T.);+#4039 = SURFACE_CURVE('',#4040,(#4044,#4051),.PCURVE_S1.);+#4040 = LINE('',#4041,#4042);+#4041 = CARTESIAN_POINT('',(1.9,-1.775,0.72));+#4042 = VECTOR('',#4043,1.);+#4043 = DIRECTION('',(0.,-1.,0.));+#4044 = PCURVE('',#3976,#4045);+#4045 = DEFINITIONAL_REPRESENTATION('',(#4046),#4050);+#4046 = LINE('',#4047,#4048);+#4047 = CARTESIAN_POINT('',(0.,0.225));+#4048 = VECTOR('',#4049,1.);+#4049 = DIRECTION('',(0.,-1.));+#4050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4051 = PCURVE('',#4052,#4057);+#4052 = PLANE('',#4053);+#4053 = AXIS2_PLACEMENT_3D('',#4054,#4055,#4056);+#4054 = CARTESIAN_POINT('',(1.95,-2.,0.72));+#4055 = DIRECTION('',(-0.,-0.,-1.));+#4056 = DIRECTION('',(-1.,0.,0.));+#4057 = DEFINITIONAL_REPRESENTATION('',(#4058),#4062);+#4058 = LINE('',#4059,#4060);+#4059 = CARTESIAN_POINT('',(5.E-02,0.225));+#4060 = VECTOR('',#4061,1.);+#4061 = DIRECTION('',(0.,-1.));+#4062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4063 = ADVANCED_FACE('',(#4064),#4052,.T.);+#4064 = FACE_BOUND('',#4065,.T.);+#4065 = EDGE_LOOP('',(#4066,#4089,#4090,#4113));+#4066 = ORIENTED_EDGE('',*,*,#4067,.T.);+#4067 = EDGE_CURVE('',#4068,#3992,#4070,.T.);+#4068 = VERTEX_POINT('',#4069);+#4069 = CARTESIAN_POINT('',(1.95,-2.225,0.72));+#4070 = SURFACE_CURVE('',#4071,(#4075,#4082),.PCURVE_S1.);+#4071 = LINE('',#4072,#4073);+#4072 = CARTESIAN_POINT('',(1.95,-2.225,0.72));+#4073 = VECTOR('',#4074,1.);+#4074 = DIRECTION('',(-1.,0.,0.));+#4075 = PCURVE('',#4052,#4076);+#4076 = DEFINITIONAL_REPRESENTATION('',(#4077),#4081);+#4077 = LINE('',#4078,#4079);+#4078 = CARTESIAN_POINT('',(0.,-0.225));+#4079 = VECTOR('',#4080,1.);+#4080 = DIRECTION('',(1.,0.));+#4081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4082 = PCURVE('',#3894,#4083);+#4083 = DEFINITIONAL_REPRESENTATION('',(#4084),#4088);+#4084 = LINE('',#4085,#4086);+#4085 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#4086 = VECTOR('',#4087,1.);+#4087 = DIRECTION('',(0.,-1.));+#4088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4089 = ORIENTED_EDGE('',*,*,#4038,.F.);+#4090 = ORIENTED_EDGE('',*,*,#4091,.F.);+#4091 = EDGE_CURVE('',#4092,#4016,#4094,.T.);+#4092 = VERTEX_POINT('',#4093);+#4093 = CARTESIAN_POINT('',(1.95,-1.775,0.72));+#4094 = SURFACE_CURVE('',#4095,(#4099,#4106),.PCURVE_S1.);+#4095 = LINE('',#4096,#4097);+#4096 = CARTESIAN_POINT('',(1.95,-1.775,0.72));+#4097 = VECTOR('',#4098,1.);+#4098 = DIRECTION('',(-1.,0.,0.));+#4099 = PCURVE('',#4052,#4100);+#4100 = DEFINITIONAL_REPRESENTATION('',(#4101),#4105);+#4101 = LINE('',#4102,#4103);+#4102 = CARTESIAN_POINT('',(0.,0.225));+#4103 = VECTOR('',#4104,1.);+#4104 = DIRECTION('',(1.,0.));+#4105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4106 = PCURVE('',#3950,#4107);+#4107 = DEFINITIONAL_REPRESENTATION('',(#4108),#4112);+#4108 = LINE('',#4109,#4110);+#4109 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#4110 = VECTOR('',#4111,1.);+#4111 = DIRECTION('',(0.,-1.));+#4112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4113 = ORIENTED_EDGE('',*,*,#4114,.T.);+#4114 = EDGE_CURVE('',#4092,#4068,#4115,.T.);+#4115 = SURFACE_CURVE('',#4116,(#4120,#4127),.PCURVE_S1.);+#4116 = LINE('',#4117,#4118);+#4117 = CARTESIAN_POINT('',(1.95,-1.775,0.72));+#4118 = VECTOR('',#4119,1.);+#4119 = DIRECTION('',(0.,-1.,0.));+#4120 = PCURVE('',#4052,#4121);+#4121 = DEFINITIONAL_REPRESENTATION('',(#4122),#4126);+#4122 = LINE('',#4123,#4124);+#4123 = CARTESIAN_POINT('',(0.,0.225));+#4124 = VECTOR('',#4125,1.);+#4125 = DIRECTION('',(0.,-1.));+#4126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4127 = PCURVE('',#4128,#4133);+#4128 = PLANE('',#4129);+#4129 = AXIS2_PLACEMENT_3D('',#4130,#4131,#4132);+#4130 = CARTESIAN_POINT('',(2.2625,-2.,0.));+#4131 = DIRECTION('',(-0.917323062896,-0.,-0.398143690493));+#4132 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#4133 = DEFINITIONAL_REPRESENTATION('',(#4134),#4138);+#4134 = LINE('',#4135,#4136);+#4135 = CARTESIAN_POINT('',(0.784892508564,0.225));+#4136 = VECTOR('',#4137,1.);+#4137 = DIRECTION('',(0.,-1.));+#4138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4139 = ADVANCED_FACE('',(#4140),#4128,.T.);+#4140 = FACE_BOUND('',#4141,.T.);+#4141 = EDGE_LOOP('',(#4142,#4172,#4193,#4194));+#4142 = ORIENTED_EDGE('',*,*,#4143,.F.);+#4143 = EDGE_CURVE('',#4144,#4146,#4148,.T.);+#4144 = VERTEX_POINT('',#4145);+#4145 = CARTESIAN_POINT('',(2.2625,-2.225,0.));+#4146 = VERTEX_POINT('',#4147);+#4147 = CARTESIAN_POINT('',(2.2625,-1.775,0.));+#4148 = SURFACE_CURVE('',#4149,(#4153,#4160),.PCURVE_S1.);+#4149 = LINE('',#4150,#4151);+#4150 = CARTESIAN_POINT('',(2.2625,-2.225,0.));+#4151 = VECTOR('',#4152,1.);+#4152 = DIRECTION('',(0.,1.,0.));+#4153 = PCURVE('',#4128,#4154);+#4154 = DEFINITIONAL_REPRESENTATION('',(#4155),#4159);+#4155 = LINE('',#4156,#4157);+#4156 = CARTESIAN_POINT('',(0.,-0.225));+#4157 = VECTOR('',#4158,1.);+#4158 = DIRECTION('',(0.,1.));+#4159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4160 = PCURVE('',#4161,#4166);+#4161 = PLANE('',#4162);+#4162 = AXIS2_PLACEMENT_3D('',#4163,#4164,#4165);+#4163 = CARTESIAN_POINT('',(3.03,-2.,0.));+#4164 = DIRECTION('',(-0.,-0.,-1.));+#4165 = DIRECTION('',(-1.,0.,0.));+#4166 = DEFINITIONAL_REPRESENTATION('',(#4167),#4171);+#4167 = LINE('',#4168,#4169);+#4168 = CARTESIAN_POINT('',(0.7675,-0.225));+#4169 = VECTOR('',#4170,1.);+#4170 = DIRECTION('',(0.,1.));+#4171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4172 = ORIENTED_EDGE('',*,*,#4173,.T.);+#4173 = EDGE_CURVE('',#4144,#4068,#4174,.T.);+#4174 = SURFACE_CURVE('',#4175,(#4179,#4186),.PCURVE_S1.);+#4175 = LINE('',#4176,#4177);+#4176 = CARTESIAN_POINT('',(2.2625,-2.225,0.));+#4177 = VECTOR('',#4178,1.);+#4178 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#4179 = PCURVE('',#4128,#4180);+#4180 = DEFINITIONAL_REPRESENTATION('',(#4181),#4185);+#4181 = LINE('',#4182,#4183);+#4182 = CARTESIAN_POINT('',(0.,-0.225));+#4183 = VECTOR('',#4184,1.);+#4184 = DIRECTION('',(1.,0.));+#4185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4186 = PCURVE('',#3894,#4187);+#4187 = DEFINITIONAL_REPRESENTATION('',(#4188),#4192);+#4188 = LINE('',#4189,#4190);+#4189 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#4190 = VECTOR('',#4191,1.);+#4191 = DIRECTION('',(0.917323062896,-0.398143690493));+#4192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4193 = ORIENTED_EDGE('',*,*,#4114,.F.);+#4194 = ORIENTED_EDGE('',*,*,#4195,.F.);+#4195 = EDGE_CURVE('',#4146,#4092,#4196,.T.);+#4196 = SURFACE_CURVE('',#4197,(#4201,#4208),.PCURVE_S1.);+#4197 = LINE('',#4198,#4199);+#4198 = CARTESIAN_POINT('',(2.2625,-1.775,0.));+#4199 = VECTOR('',#4200,1.);+#4200 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#4201 = PCURVE('',#4128,#4202);+#4202 = DEFINITIONAL_REPRESENTATION('',(#4203),#4207);+#4203 = LINE('',#4204,#4205);+#4204 = CARTESIAN_POINT('',(0.,0.225));+#4205 = VECTOR('',#4206,1.);+#4206 = DIRECTION('',(1.,0.));+#4207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4208 = PCURVE('',#3950,#4209);+#4209 = DEFINITIONAL_REPRESENTATION('',(#4210),#4214);+#4210 = LINE('',#4211,#4212);+#4211 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#4212 = VECTOR('',#4213,1.);+#4213 = DIRECTION('',(0.917323062896,-0.398143690493));+#4214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4215 = ADVANCED_FACE('',(#4216),#4161,.T.);+#4216 = FACE_BOUND('',#4217,.T.);+#4217 = EDGE_LOOP('',(#4218,#4248,#4269,#4270));+#4218 = ORIENTED_EDGE('',*,*,#4219,.F.);+#4219 = EDGE_CURVE('',#4220,#4222,#4224,.T.);+#4220 = VERTEX_POINT('',#4221);+#4221 = CARTESIAN_POINT('',(3.03,-2.225,0.));+#4222 = VERTEX_POINT('',#4223);+#4223 = CARTESIAN_POINT('',(3.03,-1.775,0.));+#4224 = SURFACE_CURVE('',#4225,(#4229,#4236),.PCURVE_S1.);+#4225 = LINE('',#4226,#4227);+#4226 = CARTESIAN_POINT('',(3.03,-2.225,0.));+#4227 = VECTOR('',#4228,1.);+#4228 = DIRECTION('',(0.,1.,0.));+#4229 = PCURVE('',#4161,#4230);+#4230 = DEFINITIONAL_REPRESENTATION('',(#4231),#4235);+#4231 = LINE('',#4232,#4233);+#4232 = CARTESIAN_POINT('',(0.,-0.225));+#4233 = VECTOR('',#4234,1.);+#4234 = DIRECTION('',(0.,1.));+#4235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4236 = PCURVE('',#4237,#4242);+#4237 = PLANE('',#4238);+#4238 = AXIS2_PLACEMENT_3D('',#4239,#4240,#4241);+#4239 = CARTESIAN_POINT('',(3.03,-2.,0.15));+#4240 = DIRECTION('',(1.,0.,0.));+#4241 = DIRECTION('',(0.,0.,-1.));+#4242 = DEFINITIONAL_REPRESENTATION('',(#4243),#4247);+#4243 = LINE('',#4244,#4245);+#4244 = CARTESIAN_POINT('',(0.15,-0.225));+#4245 = VECTOR('',#4246,1.);+#4246 = DIRECTION('',(0.,1.));+#4247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4248 = ORIENTED_EDGE('',*,*,#4249,.T.);+#4249 = EDGE_CURVE('',#4220,#4144,#4250,.T.);+#4250 = SURFACE_CURVE('',#4251,(#4255,#4262),.PCURVE_S1.);+#4251 = LINE('',#4252,#4253);+#4252 = CARTESIAN_POINT('',(3.03,-2.225,0.));+#4253 = VECTOR('',#4254,1.);+#4254 = DIRECTION('',(-1.,0.,0.));+#4255 = PCURVE('',#4161,#4256);+#4256 = DEFINITIONAL_REPRESENTATION('',(#4257),#4261);+#4257 = LINE('',#4258,#4259);+#4258 = CARTESIAN_POINT('',(0.,-0.225));+#4259 = VECTOR('',#4260,1.);+#4260 = DIRECTION('',(1.,0.));+#4261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4262 = PCURVE('',#3894,#4263);+#4263 = DEFINITIONAL_REPRESENTATION('',(#4264),#4268);+#4264 = LINE('',#4265,#4266);+#4265 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#4266 = VECTOR('',#4267,1.);+#4267 = DIRECTION('',(0.,-1.));+#4268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4269 = ORIENTED_EDGE('',*,*,#4143,.T.);+#4270 = ORIENTED_EDGE('',*,*,#4271,.F.);+#4271 = EDGE_CURVE('',#4222,#4146,#4272,.T.);+#4272 = SURFACE_CURVE('',#4273,(#4277,#4284),.PCURVE_S1.);+#4273 = LINE('',#4274,#4275);+#4274 = CARTESIAN_POINT('',(3.03,-1.775,0.));+#4275 = VECTOR('',#4276,1.);+#4276 = DIRECTION('',(-1.,0.,0.));+#4277 = PCURVE('',#4161,#4278);+#4278 = DEFINITIONAL_REPRESENTATION('',(#4279),#4283);+#4279 = LINE('',#4280,#4281);+#4280 = CARTESIAN_POINT('',(0.,0.225));+#4281 = VECTOR('',#4282,1.);+#4282 = DIRECTION('',(1.,0.));+#4283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4284 = PCURVE('',#3950,#4285);+#4285 = DEFINITIONAL_REPRESENTATION('',(#4286),#4290);+#4286 = LINE('',#4287,#4288);+#4287 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#4288 = VECTOR('',#4289,1.);+#4289 = DIRECTION('',(0.,-1.));+#4290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4291 = ADVANCED_FACE('',(#4292),#4237,.T.);+#4292 = FACE_BOUND('',#4293,.T.);+#4293 = EDGE_LOOP('',(#4294,#4324,#4345,#4346));+#4294 = ORIENTED_EDGE('',*,*,#4295,.F.);+#4295 = EDGE_CURVE('',#4296,#4298,#4300,.T.);+#4296 = VERTEX_POINT('',#4297);+#4297 = CARTESIAN_POINT('',(3.03,-2.225,0.15));+#4298 = VERTEX_POINT('',#4299);+#4299 = CARTESIAN_POINT('',(3.03,-1.775,0.15));+#4300 = SURFACE_CURVE('',#4301,(#4305,#4312),.PCURVE_S1.);+#4301 = LINE('',#4302,#4303);+#4302 = CARTESIAN_POINT('',(3.03,-2.225,0.15));+#4303 = VECTOR('',#4304,1.);+#4304 = DIRECTION('',(0.,1.,0.));+#4305 = PCURVE('',#4237,#4306);+#4306 = DEFINITIONAL_REPRESENTATION('',(#4307),#4311);+#4307 = LINE('',#4308,#4309);+#4308 = CARTESIAN_POINT('',(0.,-0.225));+#4309 = VECTOR('',#4310,1.);+#4310 = DIRECTION('',(0.,1.));+#4311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4312 = PCURVE('',#4313,#4318);+#4313 = PLANE('',#4314);+#4314 = AXIS2_PLACEMENT_3D('',#4315,#4316,#4317);+#4315 = CARTESIAN_POINT('',(2.4125,-2.,0.15));+#4316 = DIRECTION('',(0.,0.,1.));+#4317 = DIRECTION('',(1.,0.,0.));+#4318 = DEFINITIONAL_REPRESENTATION('',(#4319),#4323);+#4319 = LINE('',#4320,#4321);+#4320 = CARTESIAN_POINT('',(0.6175,-0.225));+#4321 = VECTOR('',#4322,1.);+#4322 = DIRECTION('',(0.,1.));+#4323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4324 = ORIENTED_EDGE('',*,*,#4325,.T.);+#4325 = EDGE_CURVE('',#4296,#4220,#4326,.T.);+#4326 = SURFACE_CURVE('',#4327,(#4331,#4338),.PCURVE_S1.);+#4327 = LINE('',#4328,#4329);+#4328 = CARTESIAN_POINT('',(3.03,-2.225,0.15));+#4329 = VECTOR('',#4330,1.);+#4330 = DIRECTION('',(0.,0.,-1.));+#4331 = PCURVE('',#4237,#4332);+#4332 = DEFINITIONAL_REPRESENTATION('',(#4333),#4337);+#4333 = LINE('',#4334,#4335);+#4334 = CARTESIAN_POINT('',(0.,-0.225));+#4335 = VECTOR('',#4336,1.);+#4336 = DIRECTION('',(1.,0.));+#4337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4338 = PCURVE('',#3894,#4339);+#4339 = DEFINITIONAL_REPRESENTATION('',(#4340),#4344);+#4340 = LINE('',#4341,#4342);+#4341 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#4342 = VECTOR('',#4343,1.);+#4343 = DIRECTION('',(-1.,0.));+#4344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4345 = ORIENTED_EDGE('',*,*,#4219,.T.);+#4346 = ORIENTED_EDGE('',*,*,#4347,.F.);+#4347 = EDGE_CURVE('',#4298,#4222,#4348,.T.);+#4348 = SURFACE_CURVE('',#4349,(#4353,#4360),.PCURVE_S1.);+#4349 = LINE('',#4350,#4351);+#4350 = CARTESIAN_POINT('',(3.03,-1.775,0.15));+#4351 = VECTOR('',#4352,1.);+#4352 = DIRECTION('',(0.,0.,-1.));+#4353 = PCURVE('',#4237,#4354);+#4354 = DEFINITIONAL_REPRESENTATION('',(#4355),#4359);+#4355 = LINE('',#4356,#4357);+#4356 = CARTESIAN_POINT('',(0.,0.225));+#4357 = VECTOR('',#4358,1.);+#4358 = DIRECTION('',(1.,0.));+#4359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4360 = PCURVE('',#3950,#4361);+#4361 = DEFINITIONAL_REPRESENTATION('',(#4362),#4366);+#4362 = LINE('',#4363,#4364);+#4363 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#4364 = VECTOR('',#4365,1.);+#4365 = DIRECTION('',(-1.,0.));+#4366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4367 = ADVANCED_FACE('',(#4368),#4313,.T.);+#4368 = FACE_BOUND('',#4369,.T.);+#4369 = EDGE_LOOP('',(#4370,#4395,#4416,#4417));+#4370 = ORIENTED_EDGE('',*,*,#4371,.F.);+#4371 = EDGE_CURVE('',#4372,#4374,#4376,.T.);+#4372 = VERTEX_POINT('',#4373);+#4373 = CARTESIAN_POINT('',(2.4125,-2.225,0.15));+#4374 = VERTEX_POINT('',#4375);+#4375 = CARTESIAN_POINT('',(2.4125,-1.775,0.15));+#4376 = SURFACE_CURVE('',#4377,(#4381,#4388),.PCURVE_S1.);+#4377 = LINE('',#4378,#4379);+#4378 = CARTESIAN_POINT('',(2.4125,-2.225,0.15));+#4379 = VECTOR('',#4380,1.);+#4380 = DIRECTION('',(0.,1.,0.));+#4381 = PCURVE('',#4313,#4382);+#4382 = DEFINITIONAL_REPRESENTATION('',(#4383),#4387);+#4383 = LINE('',#4384,#4385);+#4384 = CARTESIAN_POINT('',(0.,-0.225));+#4385 = VECTOR('',#4386,1.);+#4386 = DIRECTION('',(0.,1.));+#4387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4388 = PCURVE('',#3922,#4389);+#4389 = DEFINITIONAL_REPRESENTATION('',(#4390),#4394);+#4390 = LINE('',#4391,#4392);+#4391 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#4392 = VECTOR('',#4393,1.);+#4393 = DIRECTION('',(0.,1.));+#4394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4395 = ORIENTED_EDGE('',*,*,#4396,.T.);+#4396 = EDGE_CURVE('',#4372,#4296,#4397,.T.);+#4397 = SURFACE_CURVE('',#4398,(#4402,#4409),.PCURVE_S1.);+#4398 = LINE('',#4399,#4400);+#4399 = CARTESIAN_POINT('',(2.4125,-2.225,0.15));+#4400 = VECTOR('',#4401,1.);+#4401 = DIRECTION('',(1.,0.,0.));+#4402 = PCURVE('',#4313,#4403);+#4403 = DEFINITIONAL_REPRESENTATION('',(#4404),#4408);+#4404 = LINE('',#4405,#4406);+#4405 = CARTESIAN_POINT('',(0.,-0.225));+#4406 = VECTOR('',#4407,1.);+#4407 = DIRECTION('',(1.,0.));+#4408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4409 = PCURVE('',#3894,#4410);+#4410 = DEFINITIONAL_REPRESENTATION('',(#4411),#4415);+#4411 = LINE('',#4412,#4413);+#4412 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#4413 = VECTOR('',#4414,1.);+#4414 = DIRECTION('',(0.,1.));+#4415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4416 = ORIENTED_EDGE('',*,*,#4295,.T.);+#4417 = ORIENTED_EDGE('',*,*,#4418,.F.);+#4418 = EDGE_CURVE('',#4374,#4298,#4419,.T.);+#4419 = SURFACE_CURVE('',#4420,(#4424,#4431),.PCURVE_S1.);+#4420 = LINE('',#4421,#4422);+#4421 = CARTESIAN_POINT('',(2.4125,-1.775,0.15));+#4422 = VECTOR('',#4423,1.);+#4423 = DIRECTION('',(1.,0.,0.));+#4424 = PCURVE('',#4313,#4425);+#4425 = DEFINITIONAL_REPRESENTATION('',(#4426),#4430);+#4426 = LINE('',#4427,#4428);+#4427 = CARTESIAN_POINT('',(0.,0.225));+#4428 = VECTOR('',#4429,1.);+#4429 = DIRECTION('',(1.,0.));+#4430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4431 = PCURVE('',#3950,#4432);+#4432 = DEFINITIONAL_REPRESENTATION('',(#4433),#4437);+#4433 = LINE('',#4434,#4435);+#4434 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#4435 = VECTOR('',#4436,1.);+#4436 = DIRECTION('',(0.,1.));+#4437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4438 = ADVANCED_FACE('',(#4439),#3950,.T.);+#4439 = FACE_BOUND('',#4440,.T.);+#4440 = EDGE_LOOP('',(#4441,#4442,#4463,#4464,#4465,#4466,#4467,#4468));+#4441 = ORIENTED_EDGE('',*,*,#3934,.T.);+#4442 = ORIENTED_EDGE('',*,*,#4443,.T.);+#4443 = EDGE_CURVE('',#3907,#4374,#4444,.T.);+#4444 = SURFACE_CURVE('',#4445,(#4449,#4456),.PCURVE_S1.);+#4445 = LINE('',#4446,#4447);+#4446 = CARTESIAN_POINT('',(2.1,-1.775,0.87));+#4447 = VECTOR('',#4448,1.);+#4448 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#4449 = PCURVE('',#3950,#4450);+#4450 = DEFINITIONAL_REPRESENTATION('',(#4451),#4455);+#4451 = LINE('',#4452,#4453);+#4452 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#4453 = VECTOR('',#4454,1.);+#4454 = DIRECTION('',(-0.917323062896,0.398143690493));+#4455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4456 = PCURVE('',#3922,#4457);+#4457 = DEFINITIONAL_REPRESENTATION('',(#4458),#4462);+#4458 = LINE('',#4459,#4460);+#4459 = CARTESIAN_POINT('',(0.,0.225));+#4460 = VECTOR('',#4461,1.);+#4461 = DIRECTION('',(1.,0.));+#4462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4463 = ORIENTED_EDGE('',*,*,#4418,.T.);+#4464 = ORIENTED_EDGE('',*,*,#4347,.T.);+#4465 = ORIENTED_EDGE('',*,*,#4271,.T.);+#4466 = ORIENTED_EDGE('',*,*,#4195,.T.);+#4467 = ORIENTED_EDGE('',*,*,#4091,.T.);+#4468 = ORIENTED_EDGE('',*,*,#4015,.T.);+#4469 = ADVANCED_FACE('',(#4470),#3922,.T.);+#4470 = FACE_BOUND('',#4471,.T.);+#4471 = EDGE_LOOP('',(#4472,#4473,#4494,#4495));+#4472 = ORIENTED_EDGE('',*,*,#3906,.F.);+#4473 = ORIENTED_EDGE('',*,*,#4474,.T.);+#4474 = EDGE_CURVE('',#3874,#4372,#4475,.T.);+#4475 = SURFACE_CURVE('',#4476,(#4480,#4487),.PCURVE_S1.);+#4476 = LINE('',#4477,#4478);+#4477 = CARTESIAN_POINT('',(2.1,-2.225,0.87));+#4478 = VECTOR('',#4479,1.);+#4479 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#4480 = PCURVE('',#3922,#4481);+#4481 = DEFINITIONAL_REPRESENTATION('',(#4482),#4486);+#4482 = LINE('',#4483,#4484);+#4483 = CARTESIAN_POINT('',(0.,-0.225));+#4484 = VECTOR('',#4485,1.);+#4485 = DIRECTION('',(1.,0.));+#4486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4487 = PCURVE('',#3894,#4488);+#4488 = DEFINITIONAL_REPRESENTATION('',(#4489),#4493);+#4489 = LINE('',#4490,#4491);+#4490 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#4491 = VECTOR('',#4492,1.);+#4492 = DIRECTION('',(-0.917323062896,0.398143690493));+#4493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4494 = ORIENTED_EDGE('',*,*,#4371,.T.);+#4495 = ORIENTED_EDGE('',*,*,#4443,.F.);+#4496 = ADVANCED_FACE('',(#4497),#3894,.F.);+#4497 = FACE_BOUND('',#4498,.F.);+#4498 = EDGE_LOOP('',(#4499,#4500,#4501,#4502,#4503,#4504,#4505,#4506));+#4499 = ORIENTED_EDGE('',*,*,#3871,.T.);+#4500 = ORIENTED_EDGE('',*,*,#4474,.T.);+#4501 = ORIENTED_EDGE('',*,*,#4396,.T.);+#4502 = ORIENTED_EDGE('',*,*,#4325,.T.);+#4503 = ORIENTED_EDGE('',*,*,#4249,.T.);+#4504 = ORIENTED_EDGE('',*,*,#4173,.T.);+#4505 = ORIENTED_EDGE('',*,*,#4067,.T.);+#4506 = ORIENTED_EDGE('',*,*,#3991,.T.);+#4507 = MANIFOLD_SOLID_BREP('',#4508);+#4508 = CLOSED_SHELL('',(#4509,#4629,#4705,#4781,#4857,#4933,#5009,#5080+ ,#5111,#5138));+#4509 = ADVANCED_FACE('',(#4510),#4524,.T.);+#4510 = FACE_BOUND('',#4511,.T.);+#4511 = EDGE_LOOP('',(#4512,#4547,#4575,#4603));+#4512 = ORIENTED_EDGE('',*,*,#4513,.T.);+#4513 = EDGE_CURVE('',#4514,#4516,#4518,.T.);+#4514 = VERTEX_POINT('',#4515);+#4515 = CARTESIAN_POINT('',(1.9,-1.225,0.87));+#4516 = VERTEX_POINT('',#4517);+#4517 = CARTESIAN_POINT('',(2.1,-1.225,0.87));+#4518 = SURFACE_CURVE('',#4519,(#4523,#4535),.PCURVE_S1.);+#4519 = LINE('',#4520,#4521);+#4520 = CARTESIAN_POINT('',(1.9,-1.225,0.87));+#4521 = VECTOR('',#4522,1.);+#4522 = DIRECTION('',(1.,0.,0.));+#4523 = PCURVE('',#4524,#4529);+#4524 = PLANE('',#4525);+#4525 = AXIS2_PLACEMENT_3D('',#4526,#4527,#4528);+#4526 = CARTESIAN_POINT('',(1.9,-1.,0.87));+#4527 = DIRECTION('',(0.,0.,1.));+#4528 = DIRECTION('',(1.,0.,0.));+#4529 = DEFINITIONAL_REPRESENTATION('',(#4530),#4534);+#4530 = LINE('',#4531,#4532);+#4531 = CARTESIAN_POINT('',(0.,-0.225));+#4532 = VECTOR('',#4533,1.);+#4533 = DIRECTION('',(1.,0.));+#4534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4535 = PCURVE('',#4536,#4541);+#4536 = PLANE('',#4537);+#4537 = AXIS2_PLACEMENT_3D('',#4538,#4539,#4540);+#4538 = CARTESIAN_POINT('',(2.38850950278,-1.225,0.318416529686));+#4539 = DIRECTION('',(0.,1.,0.));+#4540 = DIRECTION('',(0.,0.,1.));+#4541 = DEFINITIONAL_REPRESENTATION('',(#4542),#4546);+#4542 = LINE('',#4543,#4544);+#4543 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#4544 = VECTOR('',#4545,1.);+#4545 = DIRECTION('',(0.,1.));+#4546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4547 = ORIENTED_EDGE('',*,*,#4548,.T.);+#4548 = EDGE_CURVE('',#4516,#4549,#4551,.T.);+#4549 = VERTEX_POINT('',#4550);+#4550 = CARTESIAN_POINT('',(2.1,-0.775,0.87));+#4551 = SURFACE_CURVE('',#4552,(#4556,#4563),.PCURVE_S1.);+#4552 = LINE('',#4553,#4554);+#4553 = CARTESIAN_POINT('',(2.1,-1.225,0.87));+#4554 = VECTOR('',#4555,1.);+#4555 = DIRECTION('',(0.,1.,0.));+#4556 = PCURVE('',#4524,#4557);+#4557 = DEFINITIONAL_REPRESENTATION('',(#4558),#4562);+#4558 = LINE('',#4559,#4560);+#4559 = CARTESIAN_POINT('',(0.2,-0.225));+#4560 = VECTOR('',#4561,1.);+#4561 = DIRECTION('',(0.,1.));+#4562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4563 = PCURVE('',#4564,#4569);+#4564 = PLANE('',#4565);+#4565 = AXIS2_PLACEMENT_3D('',#4566,#4567,#4568);+#4566 = CARTESIAN_POINT('',(2.1,-1.,0.87));+#4567 = DIRECTION('',(0.917323062896,0.,0.398143690493));+#4568 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#4569 = DEFINITIONAL_REPRESENTATION('',(#4570),#4574);+#4570 = LINE('',#4571,#4572);+#4571 = CARTESIAN_POINT('',(0.,-0.225));+#4572 = VECTOR('',#4573,1.);+#4573 = DIRECTION('',(0.,1.));+#4574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4575 = ORIENTED_EDGE('',*,*,#4576,.F.);+#4576 = EDGE_CURVE('',#4577,#4549,#4579,.T.);+#4577 = VERTEX_POINT('',#4578);+#4578 = CARTESIAN_POINT('',(1.9,-0.775,0.87));+#4579 = SURFACE_CURVE('',#4580,(#4584,#4591),.PCURVE_S1.);+#4580 = LINE('',#4581,#4582);+#4581 = CARTESIAN_POINT('',(1.9,-0.775,0.87));+#4582 = VECTOR('',#4583,1.);+#4583 = DIRECTION('',(1.,0.,0.));+#4584 = PCURVE('',#4524,#4585);+#4585 = DEFINITIONAL_REPRESENTATION('',(#4586),#4590);+#4586 = LINE('',#4587,#4588);+#4587 = CARTESIAN_POINT('',(0.,0.225));+#4588 = VECTOR('',#4589,1.);+#4589 = DIRECTION('',(1.,0.));+#4590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4591 = PCURVE('',#4592,#4597);+#4592 = PLANE('',#4593);+#4593 = AXIS2_PLACEMENT_3D('',#4594,#4595,#4596);+#4594 = CARTESIAN_POINT('',(2.38850950278,-0.775,0.318416529686));+#4595 = DIRECTION('',(0.,1.,0.));+#4596 = DIRECTION('',(0.,0.,1.));+#4597 = DEFINITIONAL_REPRESENTATION('',(#4598),#4602);+#4598 = LINE('',#4599,#4600);+#4599 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#4600 = VECTOR('',#4601,1.);+#4601 = DIRECTION('',(0.,1.));+#4602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4603 = ORIENTED_EDGE('',*,*,#4604,.T.);+#4604 = EDGE_CURVE('',#4577,#4514,#4605,.T.);+#4605 = SURFACE_CURVE('',#4606,(#4610,#4617),.PCURVE_S1.);+#4606 = LINE('',#4607,#4608);+#4607 = CARTESIAN_POINT('',(1.9,-0.775,0.87));+#4608 = VECTOR('',#4609,1.);+#4609 = DIRECTION('',(0.,-1.,0.));+#4610 = PCURVE('',#4524,#4611);+#4611 = DEFINITIONAL_REPRESENTATION('',(#4612),#4616);+#4612 = LINE('',#4613,#4614);+#4613 = CARTESIAN_POINT('',(0.,0.225));+#4614 = VECTOR('',#4615,1.);+#4615 = DIRECTION('',(0.,-1.));+#4616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4617 = PCURVE('',#4618,#4623);+#4618 = PLANE('',#4619);+#4619 = AXIS2_PLACEMENT_3D('',#4620,#4621,#4622);+#4620 = CARTESIAN_POINT('',(1.9,-1.,0.72));+#4621 = DIRECTION('',(-1.,0.,0.));+#4622 = DIRECTION('',(0.,0.,1.));+#4623 = DEFINITIONAL_REPRESENTATION('',(#4624),#4628);+#4624 = LINE('',#4625,#4626);+#4625 = CARTESIAN_POINT('',(0.15,0.225));+#4626 = VECTOR('',#4627,1.);+#4627 = DIRECTION('',(0.,-1.));+#4628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4629 = ADVANCED_FACE('',(#4630),#4618,.T.);+#4630 = FACE_BOUND('',#4631,.T.);+#4631 = EDGE_LOOP('',(#4632,#4655,#4656,#4679));+#4632 = ORIENTED_EDGE('',*,*,#4633,.T.);+#4633 = EDGE_CURVE('',#4634,#4514,#4636,.T.);+#4634 = VERTEX_POINT('',#4635);+#4635 = CARTESIAN_POINT('',(1.9,-1.225,0.72));+#4636 = SURFACE_CURVE('',#4637,(#4641,#4648),.PCURVE_S1.);+#4637 = LINE('',#4638,#4639);+#4638 = CARTESIAN_POINT('',(1.9,-1.225,0.72));+#4639 = VECTOR('',#4640,1.);+#4640 = DIRECTION('',(0.,0.,1.));+#4641 = PCURVE('',#4618,#4642);+#4642 = DEFINITIONAL_REPRESENTATION('',(#4643),#4647);+#4643 = LINE('',#4644,#4645);+#4644 = CARTESIAN_POINT('',(0.,-0.225));+#4645 = VECTOR('',#4646,1.);+#4646 = DIRECTION('',(1.,0.));+#4647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4648 = PCURVE('',#4536,#4649);+#4649 = DEFINITIONAL_REPRESENTATION('',(#4650),#4654);+#4650 = LINE('',#4651,#4652);+#4651 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#4652 = VECTOR('',#4653,1.);+#4653 = DIRECTION('',(1.,0.));+#4654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4655 = ORIENTED_EDGE('',*,*,#4604,.F.);+#4656 = ORIENTED_EDGE('',*,*,#4657,.F.);+#4657 = EDGE_CURVE('',#4658,#4577,#4660,.T.);+#4658 = VERTEX_POINT('',#4659);+#4659 = CARTESIAN_POINT('',(1.9,-0.775,0.72));+#4660 = SURFACE_CURVE('',#4661,(#4665,#4672),.PCURVE_S1.);+#4661 = LINE('',#4662,#4663);+#4662 = CARTESIAN_POINT('',(1.9,-0.775,0.72));+#4663 = VECTOR('',#4664,1.);+#4664 = DIRECTION('',(0.,0.,1.));+#4665 = PCURVE('',#4618,#4666);+#4666 = DEFINITIONAL_REPRESENTATION('',(#4667),#4671);+#4667 = LINE('',#4668,#4669);+#4668 = CARTESIAN_POINT('',(0.,0.225));+#4669 = VECTOR('',#4670,1.);+#4670 = DIRECTION('',(1.,0.));+#4671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4672 = PCURVE('',#4592,#4673);+#4673 = DEFINITIONAL_REPRESENTATION('',(#4674),#4678);+#4674 = LINE('',#4675,#4676);+#4675 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#4676 = VECTOR('',#4677,1.);+#4677 = DIRECTION('',(1.,0.));+#4678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4679 = ORIENTED_EDGE('',*,*,#4680,.T.);+#4680 = EDGE_CURVE('',#4658,#4634,#4681,.T.);+#4681 = SURFACE_CURVE('',#4682,(#4686,#4693),.PCURVE_S1.);+#4682 = LINE('',#4683,#4684);+#4683 = CARTESIAN_POINT('',(1.9,-0.775,0.72));+#4684 = VECTOR('',#4685,1.);+#4685 = DIRECTION('',(0.,-1.,0.));+#4686 = PCURVE('',#4618,#4687);+#4687 = DEFINITIONAL_REPRESENTATION('',(#4688),#4692);+#4688 = LINE('',#4689,#4690);+#4689 = CARTESIAN_POINT('',(0.,0.225));+#4690 = VECTOR('',#4691,1.);+#4691 = DIRECTION('',(0.,-1.));+#4692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4693 = PCURVE('',#4694,#4699);+#4694 = PLANE('',#4695);+#4695 = AXIS2_PLACEMENT_3D('',#4696,#4697,#4698);+#4696 = CARTESIAN_POINT('',(1.95,-1.,0.72));+#4697 = DIRECTION('',(-0.,-0.,-1.));+#4698 = DIRECTION('',(-1.,0.,0.));+#4699 = DEFINITIONAL_REPRESENTATION('',(#4700),#4704);+#4700 = LINE('',#4701,#4702);+#4701 = CARTESIAN_POINT('',(5.E-02,0.225));+#4702 = VECTOR('',#4703,1.);+#4703 = DIRECTION('',(0.,-1.));+#4704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4705 = ADVANCED_FACE('',(#4706),#4694,.T.);+#4706 = FACE_BOUND('',#4707,.T.);+#4707 = EDGE_LOOP('',(#4708,#4731,#4732,#4755));+#4708 = ORIENTED_EDGE('',*,*,#4709,.T.);+#4709 = EDGE_CURVE('',#4710,#4634,#4712,.T.);+#4710 = VERTEX_POINT('',#4711);+#4711 = CARTESIAN_POINT('',(1.95,-1.225,0.72));+#4712 = SURFACE_CURVE('',#4713,(#4717,#4724),.PCURVE_S1.);+#4713 = LINE('',#4714,#4715);+#4714 = CARTESIAN_POINT('',(1.95,-1.225,0.72));+#4715 = VECTOR('',#4716,1.);+#4716 = DIRECTION('',(-1.,0.,0.));+#4717 = PCURVE('',#4694,#4718);+#4718 = DEFINITIONAL_REPRESENTATION('',(#4719),#4723);+#4719 = LINE('',#4720,#4721);+#4720 = CARTESIAN_POINT('',(0.,-0.225));+#4721 = VECTOR('',#4722,1.);+#4722 = DIRECTION('',(1.,0.));+#4723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4724 = PCURVE('',#4536,#4725);+#4725 = DEFINITIONAL_REPRESENTATION('',(#4726),#4730);+#4726 = LINE('',#4727,#4728);+#4727 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#4728 = VECTOR('',#4729,1.);+#4729 = DIRECTION('',(0.,-1.));+#4730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4731 = ORIENTED_EDGE('',*,*,#4680,.F.);+#4732 = ORIENTED_EDGE('',*,*,#4733,.F.);+#4733 = EDGE_CURVE('',#4734,#4658,#4736,.T.);+#4734 = VERTEX_POINT('',#4735);+#4735 = CARTESIAN_POINT('',(1.95,-0.775,0.72));+#4736 = SURFACE_CURVE('',#4737,(#4741,#4748),.PCURVE_S1.);+#4737 = LINE('',#4738,#4739);+#4738 = CARTESIAN_POINT('',(1.95,-0.775,0.72));+#4739 = VECTOR('',#4740,1.);+#4740 = DIRECTION('',(-1.,0.,0.));+#4741 = PCURVE('',#4694,#4742);+#4742 = DEFINITIONAL_REPRESENTATION('',(#4743),#4747);+#4743 = LINE('',#4744,#4745);+#4744 = CARTESIAN_POINT('',(0.,0.225));+#4745 = VECTOR('',#4746,1.);+#4746 = DIRECTION('',(1.,0.));+#4747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4748 = PCURVE('',#4592,#4749);+#4749 = DEFINITIONAL_REPRESENTATION('',(#4750),#4754);+#4750 = LINE('',#4751,#4752);+#4751 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#4752 = VECTOR('',#4753,1.);+#4753 = DIRECTION('',(0.,-1.));+#4754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4755 = ORIENTED_EDGE('',*,*,#4756,.T.);+#4756 = EDGE_CURVE('',#4734,#4710,#4757,.T.);+#4757 = SURFACE_CURVE('',#4758,(#4762,#4769),.PCURVE_S1.);+#4758 = LINE('',#4759,#4760);+#4759 = CARTESIAN_POINT('',(1.95,-0.775,0.72));+#4760 = VECTOR('',#4761,1.);+#4761 = DIRECTION('',(0.,-1.,0.));+#4762 = PCURVE('',#4694,#4763);+#4763 = DEFINITIONAL_REPRESENTATION('',(#4764),#4768);+#4764 = LINE('',#4765,#4766);+#4765 = CARTESIAN_POINT('',(0.,0.225));+#4766 = VECTOR('',#4767,1.);+#4767 = DIRECTION('',(0.,-1.));+#4768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4769 = PCURVE('',#4770,#4775);+#4770 = PLANE('',#4771);+#4771 = AXIS2_PLACEMENT_3D('',#4772,#4773,#4774);+#4772 = CARTESIAN_POINT('',(2.2625,-1.,0.));+#4773 = DIRECTION('',(-0.917323062896,-0.,-0.398143690493));+#4774 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#4775 = DEFINITIONAL_REPRESENTATION('',(#4776),#4780);+#4776 = LINE('',#4777,#4778);+#4777 = CARTESIAN_POINT('',(0.784892508564,0.225));+#4778 = VECTOR('',#4779,1.);+#4779 = DIRECTION('',(0.,-1.));+#4780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4781 = ADVANCED_FACE('',(#4782),#4770,.T.);+#4782 = FACE_BOUND('',#4783,.T.);+#4783 = EDGE_LOOP('',(#4784,#4814,#4835,#4836));+#4784 = ORIENTED_EDGE('',*,*,#4785,.F.);+#4785 = EDGE_CURVE('',#4786,#4788,#4790,.T.);+#4786 = VERTEX_POINT('',#4787);+#4787 = CARTESIAN_POINT('',(2.2625,-1.225,0.));+#4788 = VERTEX_POINT('',#4789);+#4789 = CARTESIAN_POINT('',(2.2625,-0.775,0.));+#4790 = SURFACE_CURVE('',#4791,(#4795,#4802),.PCURVE_S1.);+#4791 = LINE('',#4792,#4793);+#4792 = CARTESIAN_POINT('',(2.2625,-1.225,0.));+#4793 = VECTOR('',#4794,1.);+#4794 = DIRECTION('',(0.,1.,0.));+#4795 = PCURVE('',#4770,#4796);+#4796 = DEFINITIONAL_REPRESENTATION('',(#4797),#4801);+#4797 = LINE('',#4798,#4799);+#4798 = CARTESIAN_POINT('',(0.,-0.225));+#4799 = VECTOR('',#4800,1.);+#4800 = DIRECTION('',(0.,1.));+#4801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4802 = PCURVE('',#4803,#4808);+#4803 = PLANE('',#4804);+#4804 = AXIS2_PLACEMENT_3D('',#4805,#4806,#4807);+#4805 = CARTESIAN_POINT('',(3.03,-1.,0.));+#4806 = DIRECTION('',(-0.,-0.,-1.));+#4807 = DIRECTION('',(-1.,0.,0.));+#4808 = DEFINITIONAL_REPRESENTATION('',(#4809),#4813);+#4809 = LINE('',#4810,#4811);+#4810 = CARTESIAN_POINT('',(0.7675,-0.225));+#4811 = VECTOR('',#4812,1.);+#4812 = DIRECTION('',(0.,1.));+#4813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4814 = ORIENTED_EDGE('',*,*,#4815,.T.);+#4815 = EDGE_CURVE('',#4786,#4710,#4816,.T.);+#4816 = SURFACE_CURVE('',#4817,(#4821,#4828),.PCURVE_S1.);+#4817 = LINE('',#4818,#4819);+#4818 = CARTESIAN_POINT('',(2.2625,-1.225,0.));+#4819 = VECTOR('',#4820,1.);+#4820 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#4821 = PCURVE('',#4770,#4822);+#4822 = DEFINITIONAL_REPRESENTATION('',(#4823),#4827);+#4823 = LINE('',#4824,#4825);+#4824 = CARTESIAN_POINT('',(0.,-0.225));+#4825 = VECTOR('',#4826,1.);+#4826 = DIRECTION('',(1.,0.));+#4827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4828 = PCURVE('',#4536,#4829);+#4829 = DEFINITIONAL_REPRESENTATION('',(#4830),#4834);+#4830 = LINE('',#4831,#4832);+#4831 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#4832 = VECTOR('',#4833,1.);+#4833 = DIRECTION('',(0.917323062896,-0.398143690493));+#4834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4835 = ORIENTED_EDGE('',*,*,#4756,.F.);+#4836 = ORIENTED_EDGE('',*,*,#4837,.F.);+#4837 = EDGE_CURVE('',#4788,#4734,#4838,.T.);+#4838 = SURFACE_CURVE('',#4839,(#4843,#4850),.PCURVE_S1.);+#4839 = LINE('',#4840,#4841);+#4840 = CARTESIAN_POINT('',(2.2625,-0.775,0.));+#4841 = VECTOR('',#4842,1.);+#4842 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#4843 = PCURVE('',#4770,#4844);+#4844 = DEFINITIONAL_REPRESENTATION('',(#4845),#4849);+#4845 = LINE('',#4846,#4847);+#4846 = CARTESIAN_POINT('',(0.,0.225));+#4847 = VECTOR('',#4848,1.);+#4848 = DIRECTION('',(1.,0.));+#4849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4850 = PCURVE('',#4592,#4851);+#4851 = DEFINITIONAL_REPRESENTATION('',(#4852),#4856);+#4852 = LINE('',#4853,#4854);+#4853 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#4854 = VECTOR('',#4855,1.);+#4855 = DIRECTION('',(0.917323062896,-0.398143690493));+#4856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4857 = ADVANCED_FACE('',(#4858),#4803,.T.);+#4858 = FACE_BOUND('',#4859,.T.);+#4859 = EDGE_LOOP('',(#4860,#4890,#4911,#4912));+#4860 = ORIENTED_EDGE('',*,*,#4861,.F.);+#4861 = EDGE_CURVE('',#4862,#4864,#4866,.T.);+#4862 = VERTEX_POINT('',#4863);+#4863 = CARTESIAN_POINT('',(3.03,-1.225,0.));+#4864 = VERTEX_POINT('',#4865);+#4865 = CARTESIAN_POINT('',(3.03,-0.775,0.));+#4866 = SURFACE_CURVE('',#4867,(#4871,#4878),.PCURVE_S1.);+#4867 = LINE('',#4868,#4869);+#4868 = CARTESIAN_POINT('',(3.03,-1.225,0.));+#4869 = VECTOR('',#4870,1.);+#4870 = DIRECTION('',(0.,1.,0.));+#4871 = PCURVE('',#4803,#4872);+#4872 = DEFINITIONAL_REPRESENTATION('',(#4873),#4877);+#4873 = LINE('',#4874,#4875);+#4874 = CARTESIAN_POINT('',(0.,-0.225));+#4875 = VECTOR('',#4876,1.);+#4876 = DIRECTION('',(0.,1.));+#4877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4878 = PCURVE('',#4879,#4884);+#4879 = PLANE('',#4880);+#4880 = AXIS2_PLACEMENT_3D('',#4881,#4882,#4883);+#4881 = CARTESIAN_POINT('',(3.03,-1.,0.15));+#4882 = DIRECTION('',(1.,0.,0.));+#4883 = DIRECTION('',(0.,0.,-1.));+#4884 = DEFINITIONAL_REPRESENTATION('',(#4885),#4889);+#4885 = LINE('',#4886,#4887);+#4886 = CARTESIAN_POINT('',(0.15,-0.225));+#4887 = VECTOR('',#4888,1.);+#4888 = DIRECTION('',(0.,1.));+#4889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4890 = ORIENTED_EDGE('',*,*,#4891,.T.);+#4891 = EDGE_CURVE('',#4862,#4786,#4892,.T.);+#4892 = SURFACE_CURVE('',#4893,(#4897,#4904),.PCURVE_S1.);+#4893 = LINE('',#4894,#4895);+#4894 = CARTESIAN_POINT('',(3.03,-1.225,0.));+#4895 = VECTOR('',#4896,1.);+#4896 = DIRECTION('',(-1.,0.,0.));+#4897 = PCURVE('',#4803,#4898);+#4898 = DEFINITIONAL_REPRESENTATION('',(#4899),#4903);+#4899 = LINE('',#4900,#4901);+#4900 = CARTESIAN_POINT('',(0.,-0.225));+#4901 = VECTOR('',#4902,1.);+#4902 = DIRECTION('',(1.,0.));+#4903 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4904 = PCURVE('',#4536,#4905);+#4905 = DEFINITIONAL_REPRESENTATION('',(#4906),#4910);+#4906 = LINE('',#4907,#4908);+#4907 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#4908 = VECTOR('',#4909,1.);+#4909 = DIRECTION('',(0.,-1.));+#4910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4911 = ORIENTED_EDGE('',*,*,#4785,.T.);+#4912 = ORIENTED_EDGE('',*,*,#4913,.F.);+#4913 = EDGE_CURVE('',#4864,#4788,#4914,.T.);+#4914 = SURFACE_CURVE('',#4915,(#4919,#4926),.PCURVE_S1.);+#4915 = LINE('',#4916,#4917);+#4916 = CARTESIAN_POINT('',(3.03,-0.775,0.));+#4917 = VECTOR('',#4918,1.);+#4918 = DIRECTION('',(-1.,0.,0.));+#4919 = PCURVE('',#4803,#4920);+#4920 = DEFINITIONAL_REPRESENTATION('',(#4921),#4925);+#4921 = LINE('',#4922,#4923);+#4922 = CARTESIAN_POINT('',(0.,0.225));+#4923 = VECTOR('',#4924,1.);+#4924 = DIRECTION('',(1.,0.));+#4925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4926 = PCURVE('',#4592,#4927);+#4927 = DEFINITIONAL_REPRESENTATION('',(#4928),#4932);+#4928 = LINE('',#4929,#4930);+#4929 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#4930 = VECTOR('',#4931,1.);+#4931 = DIRECTION('',(0.,-1.));+#4932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4933 = ADVANCED_FACE('',(#4934),#4879,.T.);+#4934 = FACE_BOUND('',#4935,.T.);+#4935 = EDGE_LOOP('',(#4936,#4966,#4987,#4988));+#4936 = ORIENTED_EDGE('',*,*,#4937,.F.);+#4937 = EDGE_CURVE('',#4938,#4940,#4942,.T.);+#4938 = VERTEX_POINT('',#4939);+#4939 = CARTESIAN_POINT('',(3.03,-1.225,0.15));+#4940 = VERTEX_POINT('',#4941);+#4941 = CARTESIAN_POINT('',(3.03,-0.775,0.15));+#4942 = SURFACE_CURVE('',#4943,(#4947,#4954),.PCURVE_S1.);+#4943 = LINE('',#4944,#4945);+#4944 = CARTESIAN_POINT('',(3.03,-1.225,0.15));+#4945 = VECTOR('',#4946,1.);+#4946 = DIRECTION('',(0.,1.,0.));+#4947 = PCURVE('',#4879,#4948);+#4948 = DEFINITIONAL_REPRESENTATION('',(#4949),#4953);+#4949 = LINE('',#4950,#4951);+#4950 = CARTESIAN_POINT('',(0.,-0.225));+#4951 = VECTOR('',#4952,1.);+#4952 = DIRECTION('',(0.,1.));+#4953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4954 = PCURVE('',#4955,#4960);+#4955 = PLANE('',#4956);+#4956 = AXIS2_PLACEMENT_3D('',#4957,#4958,#4959);+#4957 = CARTESIAN_POINT('',(2.4125,-1.,0.15));+#4958 = DIRECTION('',(0.,0.,1.));+#4959 = DIRECTION('',(1.,0.,0.));+#4960 = DEFINITIONAL_REPRESENTATION('',(#4961),#4965);+#4961 = LINE('',#4962,#4963);+#4962 = CARTESIAN_POINT('',(0.6175,-0.225));+#4963 = VECTOR('',#4964,1.);+#4964 = DIRECTION('',(0.,1.));+#4965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4966 = ORIENTED_EDGE('',*,*,#4967,.T.);+#4967 = EDGE_CURVE('',#4938,#4862,#4968,.T.);+#4968 = SURFACE_CURVE('',#4969,(#4973,#4980),.PCURVE_S1.);+#4969 = LINE('',#4970,#4971);+#4970 = CARTESIAN_POINT('',(3.03,-1.225,0.15));+#4971 = VECTOR('',#4972,1.);+#4972 = DIRECTION('',(0.,0.,-1.));+#4973 = PCURVE('',#4879,#4974);+#4974 = DEFINITIONAL_REPRESENTATION('',(#4975),#4979);+#4975 = LINE('',#4976,#4977);+#4976 = CARTESIAN_POINT('',(0.,-0.225));+#4977 = VECTOR('',#4978,1.);+#4978 = DIRECTION('',(1.,0.));+#4979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4980 = PCURVE('',#4536,#4981);+#4981 = DEFINITIONAL_REPRESENTATION('',(#4982),#4986);+#4982 = LINE('',#4983,#4984);+#4983 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#4984 = VECTOR('',#4985,1.);+#4985 = DIRECTION('',(-1.,0.));+#4986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#4987 = ORIENTED_EDGE('',*,*,#4861,.T.);+#4988 = ORIENTED_EDGE('',*,*,#4989,.F.);+#4989 = EDGE_CURVE('',#4940,#4864,#4990,.T.);+#4990 = SURFACE_CURVE('',#4991,(#4995,#5002),.PCURVE_S1.);+#4991 = LINE('',#4992,#4993);+#4992 = CARTESIAN_POINT('',(3.03,-0.775,0.15));+#4993 = VECTOR('',#4994,1.);+#4994 = DIRECTION('',(0.,0.,-1.));+#4995 = PCURVE('',#4879,#4996);+#4996 = DEFINITIONAL_REPRESENTATION('',(#4997),#5001);+#4997 = LINE('',#4998,#4999);+#4998 = CARTESIAN_POINT('',(0.,0.225));+#4999 = VECTOR('',#5000,1.);+#5000 = DIRECTION('',(1.,0.));+#5001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5002 = PCURVE('',#4592,#5003);+#5003 = DEFINITIONAL_REPRESENTATION('',(#5004),#5008);+#5004 = LINE('',#5005,#5006);+#5005 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#5006 = VECTOR('',#5007,1.);+#5007 = DIRECTION('',(-1.,0.));+#5008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5009 = ADVANCED_FACE('',(#5010),#4955,.T.);+#5010 = FACE_BOUND('',#5011,.T.);+#5011 = EDGE_LOOP('',(#5012,#5037,#5058,#5059));+#5012 = ORIENTED_EDGE('',*,*,#5013,.F.);+#5013 = EDGE_CURVE('',#5014,#5016,#5018,.T.);+#5014 = VERTEX_POINT('',#5015);+#5015 = CARTESIAN_POINT('',(2.4125,-1.225,0.15));+#5016 = VERTEX_POINT('',#5017);+#5017 = CARTESIAN_POINT('',(2.4125,-0.775,0.15));+#5018 = SURFACE_CURVE('',#5019,(#5023,#5030),.PCURVE_S1.);+#5019 = LINE('',#5020,#5021);+#5020 = CARTESIAN_POINT('',(2.4125,-1.225,0.15));+#5021 = VECTOR('',#5022,1.);+#5022 = DIRECTION('',(0.,1.,0.));+#5023 = PCURVE('',#4955,#5024);+#5024 = DEFINITIONAL_REPRESENTATION('',(#5025),#5029);+#5025 = LINE('',#5026,#5027);+#5026 = CARTESIAN_POINT('',(0.,-0.225));+#5027 = VECTOR('',#5028,1.);+#5028 = DIRECTION('',(0.,1.));+#5029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5030 = PCURVE('',#4564,#5031);+#5031 = DEFINITIONAL_REPRESENTATION('',(#5032),#5036);+#5032 = LINE('',#5033,#5034);+#5033 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#5034 = VECTOR('',#5035,1.);+#5035 = DIRECTION('',(0.,1.));+#5036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5037 = ORIENTED_EDGE('',*,*,#5038,.T.);+#5038 = EDGE_CURVE('',#5014,#4938,#5039,.T.);+#5039 = SURFACE_CURVE('',#5040,(#5044,#5051),.PCURVE_S1.);+#5040 = LINE('',#5041,#5042);+#5041 = CARTESIAN_POINT('',(2.4125,-1.225,0.15));+#5042 = VECTOR('',#5043,1.);+#5043 = DIRECTION('',(1.,0.,0.));+#5044 = PCURVE('',#4955,#5045);+#5045 = DEFINITIONAL_REPRESENTATION('',(#5046),#5050);+#5046 = LINE('',#5047,#5048);+#5047 = CARTESIAN_POINT('',(0.,-0.225));+#5048 = VECTOR('',#5049,1.);+#5049 = DIRECTION('',(1.,0.));+#5050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5051 = PCURVE('',#4536,#5052);+#5052 = DEFINITIONAL_REPRESENTATION('',(#5053),#5057);+#5053 = LINE('',#5054,#5055);+#5054 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#5055 = VECTOR('',#5056,1.);+#5056 = DIRECTION('',(0.,1.));+#5057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5058 = ORIENTED_EDGE('',*,*,#4937,.T.);+#5059 = ORIENTED_EDGE('',*,*,#5060,.F.);+#5060 = EDGE_CURVE('',#5016,#4940,#5061,.T.);+#5061 = SURFACE_CURVE('',#5062,(#5066,#5073),.PCURVE_S1.);+#5062 = LINE('',#5063,#5064);+#5063 = CARTESIAN_POINT('',(2.4125,-0.775,0.15));+#5064 = VECTOR('',#5065,1.);+#5065 = DIRECTION('',(1.,0.,0.));+#5066 = PCURVE('',#4955,#5067);+#5067 = DEFINITIONAL_REPRESENTATION('',(#5068),#5072);+#5068 = LINE('',#5069,#5070);+#5069 = CARTESIAN_POINT('',(0.,0.225));+#5070 = VECTOR('',#5071,1.);+#5071 = DIRECTION('',(1.,0.));+#5072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5073 = PCURVE('',#4592,#5074);+#5074 = DEFINITIONAL_REPRESENTATION('',(#5075),#5079);+#5075 = LINE('',#5076,#5077);+#5076 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#5077 = VECTOR('',#5078,1.);+#5078 = DIRECTION('',(0.,1.));+#5079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5080 = ADVANCED_FACE('',(#5081),#4592,.T.);+#5081 = FACE_BOUND('',#5082,.T.);+#5082 = EDGE_LOOP('',(#5083,#5084,#5105,#5106,#5107,#5108,#5109,#5110));+#5083 = ORIENTED_EDGE('',*,*,#4576,.T.);+#5084 = ORIENTED_EDGE('',*,*,#5085,.T.);+#5085 = EDGE_CURVE('',#4549,#5016,#5086,.T.);+#5086 = SURFACE_CURVE('',#5087,(#5091,#5098),.PCURVE_S1.);+#5087 = LINE('',#5088,#5089);+#5088 = CARTESIAN_POINT('',(2.1,-0.775,0.87));+#5089 = VECTOR('',#5090,1.);+#5090 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#5091 = PCURVE('',#4592,#5092);+#5092 = DEFINITIONAL_REPRESENTATION('',(#5093),#5097);+#5093 = LINE('',#5094,#5095);+#5094 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#5095 = VECTOR('',#5096,1.);+#5096 = DIRECTION('',(-0.917323062896,0.398143690493));+#5097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5098 = PCURVE('',#4564,#5099);+#5099 = DEFINITIONAL_REPRESENTATION('',(#5100),#5104);+#5100 = LINE('',#5101,#5102);+#5101 = CARTESIAN_POINT('',(0.,0.225));+#5102 = VECTOR('',#5103,1.);+#5103 = DIRECTION('',(1.,0.));+#5104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5105 = ORIENTED_EDGE('',*,*,#5060,.T.);+#5106 = ORIENTED_EDGE('',*,*,#4989,.T.);+#5107 = ORIENTED_EDGE('',*,*,#4913,.T.);+#5108 = ORIENTED_EDGE('',*,*,#4837,.T.);+#5109 = ORIENTED_EDGE('',*,*,#4733,.T.);+#5110 = ORIENTED_EDGE('',*,*,#4657,.T.);+#5111 = ADVANCED_FACE('',(#5112),#4564,.T.);+#5112 = FACE_BOUND('',#5113,.T.);+#5113 = EDGE_LOOP('',(#5114,#5115,#5136,#5137));+#5114 = ORIENTED_EDGE('',*,*,#4548,.F.);+#5115 = ORIENTED_EDGE('',*,*,#5116,.T.);+#5116 = EDGE_CURVE('',#4516,#5014,#5117,.T.);+#5117 = SURFACE_CURVE('',#5118,(#5122,#5129),.PCURVE_S1.);+#5118 = LINE('',#5119,#5120);+#5119 = CARTESIAN_POINT('',(2.1,-1.225,0.87));+#5120 = VECTOR('',#5121,1.);+#5121 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#5122 = PCURVE('',#4564,#5123);+#5123 = DEFINITIONAL_REPRESENTATION('',(#5124),#5128);+#5124 = LINE('',#5125,#5126);+#5125 = CARTESIAN_POINT('',(0.,-0.225));+#5126 = VECTOR('',#5127,1.);+#5127 = DIRECTION('',(1.,0.));+#5128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5129 = PCURVE('',#4536,#5130);+#5130 = DEFINITIONAL_REPRESENTATION('',(#5131),#5135);+#5131 = LINE('',#5132,#5133);+#5132 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#5133 = VECTOR('',#5134,1.);+#5134 = DIRECTION('',(-0.917323062896,0.398143690493));+#5135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5136 = ORIENTED_EDGE('',*,*,#5013,.T.);+#5137 = ORIENTED_EDGE('',*,*,#5085,.F.);+#5138 = ADVANCED_FACE('',(#5139),#4536,.F.);+#5139 = FACE_BOUND('',#5140,.F.);+#5140 = EDGE_LOOP('',(#5141,#5142,#5143,#5144,#5145,#5146,#5147,#5148));+#5141 = ORIENTED_EDGE('',*,*,#4513,.T.);+#5142 = ORIENTED_EDGE('',*,*,#5116,.T.);+#5143 = ORIENTED_EDGE('',*,*,#5038,.T.);+#5144 = ORIENTED_EDGE('',*,*,#4967,.T.);+#5145 = ORIENTED_EDGE('',*,*,#4891,.T.);+#5146 = ORIENTED_EDGE('',*,*,#4815,.T.);+#5147 = ORIENTED_EDGE('',*,*,#4709,.T.);+#5148 = ORIENTED_EDGE('',*,*,#4633,.T.);+#5149 = MANIFOLD_SOLID_BREP('',#5150);+#5150 = CLOSED_SHELL('',(#5151,#5271,#5347,#5423,#5499,#5575,#5651,#5722+ ,#5753,#5780));+#5151 = ADVANCED_FACE('',(#5152),#5166,.T.);+#5152 = FACE_BOUND('',#5153,.T.);+#5153 = EDGE_LOOP('',(#5154,#5189,#5217,#5245));+#5154 = ORIENTED_EDGE('',*,*,#5155,.T.);+#5155 = EDGE_CURVE('',#5156,#5158,#5160,.T.);+#5156 = VERTEX_POINT('',#5157);+#5157 = CARTESIAN_POINT('',(1.9,-0.225,0.87));+#5158 = VERTEX_POINT('',#5159);+#5159 = CARTESIAN_POINT('',(2.1,-0.225,0.87));+#5160 = SURFACE_CURVE('',#5161,(#5165,#5177),.PCURVE_S1.);+#5161 = LINE('',#5162,#5163);+#5162 = CARTESIAN_POINT('',(1.9,-0.225,0.87));+#5163 = VECTOR('',#5164,1.);+#5164 = DIRECTION('',(1.,0.,0.));+#5165 = PCURVE('',#5166,#5171);+#5166 = PLANE('',#5167);+#5167 = AXIS2_PLACEMENT_3D('',#5168,#5169,#5170);+#5168 = CARTESIAN_POINT('',(1.9,0.,0.87));+#5169 = DIRECTION('',(0.,0.,1.));+#5170 = DIRECTION('',(1.,0.,0.));+#5171 = DEFINITIONAL_REPRESENTATION('',(#5172),#5176);+#5172 = LINE('',#5173,#5174);+#5173 = CARTESIAN_POINT('',(0.,-0.225));+#5174 = VECTOR('',#5175,1.);+#5175 = DIRECTION('',(1.,0.));+#5176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5177 = PCURVE('',#5178,#5183);+#5178 = PLANE('',#5179);+#5179 = AXIS2_PLACEMENT_3D('',#5180,#5181,#5182);+#5180 = CARTESIAN_POINT('',(2.38850950278,-0.225,0.318416529686));+#5181 = DIRECTION('',(0.,1.,0.));+#5182 = DIRECTION('',(0.,0.,1.));+#5183 = DEFINITIONAL_REPRESENTATION('',(#5184),#5188);+#5184 = LINE('',#5185,#5186);+#5185 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#5186 = VECTOR('',#5187,1.);+#5187 = DIRECTION('',(0.,1.));+#5188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5189 = ORIENTED_EDGE('',*,*,#5190,.T.);+#5190 = EDGE_CURVE('',#5158,#5191,#5193,.T.);+#5191 = VERTEX_POINT('',#5192);+#5192 = CARTESIAN_POINT('',(2.1,0.225,0.87));+#5193 = SURFACE_CURVE('',#5194,(#5198,#5205),.PCURVE_S1.);+#5194 = LINE('',#5195,#5196);+#5195 = CARTESIAN_POINT('',(2.1,-0.225,0.87));+#5196 = VECTOR('',#5197,1.);+#5197 = DIRECTION('',(0.,1.,0.));+#5198 = PCURVE('',#5166,#5199);+#5199 = DEFINITIONAL_REPRESENTATION('',(#5200),#5204);+#5200 = LINE('',#5201,#5202);+#5201 = CARTESIAN_POINT('',(0.2,-0.225));+#5202 = VECTOR('',#5203,1.);+#5203 = DIRECTION('',(0.,1.));+#5204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5205 = PCURVE('',#5206,#5211);+#5206 = PLANE('',#5207);+#5207 = AXIS2_PLACEMENT_3D('',#5208,#5209,#5210);+#5208 = CARTESIAN_POINT('',(2.1,0.,0.87));+#5209 = DIRECTION('',(0.917323062896,0.,0.398143690493));+#5210 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#5211 = DEFINITIONAL_REPRESENTATION('',(#5212),#5216);+#5212 = LINE('',#5213,#5214);+#5213 = CARTESIAN_POINT('',(0.,-0.225));+#5214 = VECTOR('',#5215,1.);+#5215 = DIRECTION('',(0.,1.));+#5216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5217 = ORIENTED_EDGE('',*,*,#5218,.F.);+#5218 = EDGE_CURVE('',#5219,#5191,#5221,.T.);+#5219 = VERTEX_POINT('',#5220);+#5220 = CARTESIAN_POINT('',(1.9,0.225,0.87));+#5221 = SURFACE_CURVE('',#5222,(#5226,#5233),.PCURVE_S1.);+#5222 = LINE('',#5223,#5224);+#5223 = CARTESIAN_POINT('',(1.9,0.225,0.87));+#5224 = VECTOR('',#5225,1.);+#5225 = DIRECTION('',(1.,0.,0.));+#5226 = PCURVE('',#5166,#5227);+#5227 = DEFINITIONAL_REPRESENTATION('',(#5228),#5232);+#5228 = LINE('',#5229,#5230);+#5229 = CARTESIAN_POINT('',(0.,0.225));+#5230 = VECTOR('',#5231,1.);+#5231 = DIRECTION('',(1.,0.));+#5232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5233 = PCURVE('',#5234,#5239);+#5234 = PLANE('',#5235);+#5235 = AXIS2_PLACEMENT_3D('',#5236,#5237,#5238);+#5236 = CARTESIAN_POINT('',(2.38850950278,0.225,0.318416529686));+#5237 = DIRECTION('',(0.,1.,0.));+#5238 = DIRECTION('',(0.,0.,1.));+#5239 = DEFINITIONAL_REPRESENTATION('',(#5240),#5244);+#5240 = LINE('',#5241,#5242);+#5241 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#5242 = VECTOR('',#5243,1.);+#5243 = DIRECTION('',(0.,1.));+#5244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5245 = ORIENTED_EDGE('',*,*,#5246,.T.);+#5246 = EDGE_CURVE('',#5219,#5156,#5247,.T.);+#5247 = SURFACE_CURVE('',#5248,(#5252,#5259),.PCURVE_S1.);+#5248 = LINE('',#5249,#5250);+#5249 = CARTESIAN_POINT('',(1.9,0.225,0.87));+#5250 = VECTOR('',#5251,1.);+#5251 = DIRECTION('',(0.,-1.,0.));+#5252 = PCURVE('',#5166,#5253);+#5253 = DEFINITIONAL_REPRESENTATION('',(#5254),#5258);+#5254 = LINE('',#5255,#5256);+#5255 = CARTESIAN_POINT('',(0.,0.225));+#5256 = VECTOR('',#5257,1.);+#5257 = DIRECTION('',(0.,-1.));+#5258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5259 = PCURVE('',#5260,#5265);+#5260 = PLANE('',#5261);+#5261 = AXIS2_PLACEMENT_3D('',#5262,#5263,#5264);+#5262 = CARTESIAN_POINT('',(1.9,0.,0.72));+#5263 = DIRECTION('',(-1.,0.,0.));+#5264 = DIRECTION('',(0.,0.,1.));+#5265 = DEFINITIONAL_REPRESENTATION('',(#5266),#5270);+#5266 = LINE('',#5267,#5268);+#5267 = CARTESIAN_POINT('',(0.15,0.225));+#5268 = VECTOR('',#5269,1.);+#5269 = DIRECTION('',(0.,-1.));+#5270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5271 = ADVANCED_FACE('',(#5272),#5260,.T.);+#5272 = FACE_BOUND('',#5273,.T.);+#5273 = EDGE_LOOP('',(#5274,#5297,#5298,#5321));+#5274 = ORIENTED_EDGE('',*,*,#5275,.T.);+#5275 = EDGE_CURVE('',#5276,#5156,#5278,.T.);+#5276 = VERTEX_POINT('',#5277);+#5277 = CARTESIAN_POINT('',(1.9,-0.225,0.72));+#5278 = SURFACE_CURVE('',#5279,(#5283,#5290),.PCURVE_S1.);+#5279 = LINE('',#5280,#5281);+#5280 = CARTESIAN_POINT('',(1.9,-0.225,0.72));+#5281 = VECTOR('',#5282,1.);+#5282 = DIRECTION('',(0.,0.,1.));+#5283 = PCURVE('',#5260,#5284);+#5284 = DEFINITIONAL_REPRESENTATION('',(#5285),#5289);+#5285 = LINE('',#5286,#5287);+#5286 = CARTESIAN_POINT('',(0.,-0.225));+#5287 = VECTOR('',#5288,1.);+#5288 = DIRECTION('',(1.,0.));+#5289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5290 = PCURVE('',#5178,#5291);+#5291 = DEFINITIONAL_REPRESENTATION('',(#5292),#5296);+#5292 = LINE('',#5293,#5294);+#5293 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#5294 = VECTOR('',#5295,1.);+#5295 = DIRECTION('',(1.,0.));+#5296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5297 = ORIENTED_EDGE('',*,*,#5246,.F.);+#5298 = ORIENTED_EDGE('',*,*,#5299,.F.);+#5299 = EDGE_CURVE('',#5300,#5219,#5302,.T.);+#5300 = VERTEX_POINT('',#5301);+#5301 = CARTESIAN_POINT('',(1.9,0.225,0.72));+#5302 = SURFACE_CURVE('',#5303,(#5307,#5314),.PCURVE_S1.);+#5303 = LINE('',#5304,#5305);+#5304 = CARTESIAN_POINT('',(1.9,0.225,0.72));+#5305 = VECTOR('',#5306,1.);+#5306 = DIRECTION('',(0.,0.,1.));+#5307 = PCURVE('',#5260,#5308);+#5308 = DEFINITIONAL_REPRESENTATION('',(#5309),#5313);+#5309 = LINE('',#5310,#5311);+#5310 = CARTESIAN_POINT('',(0.,0.225));+#5311 = VECTOR('',#5312,1.);+#5312 = DIRECTION('',(1.,0.));+#5313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5314 = PCURVE('',#5234,#5315);+#5315 = DEFINITIONAL_REPRESENTATION('',(#5316),#5320);+#5316 = LINE('',#5317,#5318);+#5317 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#5318 = VECTOR('',#5319,1.);+#5319 = DIRECTION('',(1.,0.));+#5320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5321 = ORIENTED_EDGE('',*,*,#5322,.T.);+#5322 = EDGE_CURVE('',#5300,#5276,#5323,.T.);+#5323 = SURFACE_CURVE('',#5324,(#5328,#5335),.PCURVE_S1.);+#5324 = LINE('',#5325,#5326);+#5325 = CARTESIAN_POINT('',(1.9,0.225,0.72));+#5326 = VECTOR('',#5327,1.);+#5327 = DIRECTION('',(0.,-1.,0.));+#5328 = PCURVE('',#5260,#5329);+#5329 = DEFINITIONAL_REPRESENTATION('',(#5330),#5334);+#5330 = LINE('',#5331,#5332);+#5331 = CARTESIAN_POINT('',(0.,0.225));+#5332 = VECTOR('',#5333,1.);+#5333 = DIRECTION('',(0.,-1.));+#5334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5335 = PCURVE('',#5336,#5341);+#5336 = PLANE('',#5337);+#5337 = AXIS2_PLACEMENT_3D('',#5338,#5339,#5340);+#5338 = CARTESIAN_POINT('',(1.95,0.,0.72));+#5339 = DIRECTION('',(-0.,-0.,-1.));+#5340 = DIRECTION('',(-1.,0.,0.));+#5341 = DEFINITIONAL_REPRESENTATION('',(#5342),#5346);+#5342 = LINE('',#5343,#5344);+#5343 = CARTESIAN_POINT('',(5.E-02,0.225));+#5344 = VECTOR('',#5345,1.);+#5345 = DIRECTION('',(0.,-1.));+#5346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5347 = ADVANCED_FACE('',(#5348),#5336,.T.);+#5348 = FACE_BOUND('',#5349,.T.);+#5349 = EDGE_LOOP('',(#5350,#5373,#5374,#5397));+#5350 = ORIENTED_EDGE('',*,*,#5351,.T.);+#5351 = EDGE_CURVE('',#5352,#5276,#5354,.T.);+#5352 = VERTEX_POINT('',#5353);+#5353 = CARTESIAN_POINT('',(1.95,-0.225,0.72));+#5354 = SURFACE_CURVE('',#5355,(#5359,#5366),.PCURVE_S1.);+#5355 = LINE('',#5356,#5357);+#5356 = CARTESIAN_POINT('',(1.95,-0.225,0.72));+#5357 = VECTOR('',#5358,1.);+#5358 = DIRECTION('',(-1.,0.,0.));+#5359 = PCURVE('',#5336,#5360);+#5360 = DEFINITIONAL_REPRESENTATION('',(#5361),#5365);+#5361 = LINE('',#5362,#5363);+#5362 = CARTESIAN_POINT('',(0.,-0.225));+#5363 = VECTOR('',#5364,1.);+#5364 = DIRECTION('',(1.,0.));+#5365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5366 = PCURVE('',#5178,#5367);+#5367 = DEFINITIONAL_REPRESENTATION('',(#5368),#5372);+#5368 = LINE('',#5369,#5370);+#5369 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#5370 = VECTOR('',#5371,1.);+#5371 = DIRECTION('',(0.,-1.));+#5372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5373 = ORIENTED_EDGE('',*,*,#5322,.F.);+#5374 = ORIENTED_EDGE('',*,*,#5375,.F.);+#5375 = EDGE_CURVE('',#5376,#5300,#5378,.T.);+#5376 = VERTEX_POINT('',#5377);+#5377 = CARTESIAN_POINT('',(1.95,0.225,0.72));+#5378 = SURFACE_CURVE('',#5379,(#5383,#5390),.PCURVE_S1.);+#5379 = LINE('',#5380,#5381);+#5380 = CARTESIAN_POINT('',(1.95,0.225,0.72));+#5381 = VECTOR('',#5382,1.);+#5382 = DIRECTION('',(-1.,0.,0.));+#5383 = PCURVE('',#5336,#5384);+#5384 = DEFINITIONAL_REPRESENTATION('',(#5385),#5389);+#5385 = LINE('',#5386,#5387);+#5386 = CARTESIAN_POINT('',(0.,0.225));+#5387 = VECTOR('',#5388,1.);+#5388 = DIRECTION('',(1.,0.));+#5389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5390 = PCURVE('',#5234,#5391);+#5391 = DEFINITIONAL_REPRESENTATION('',(#5392),#5396);+#5392 = LINE('',#5393,#5394);+#5393 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#5394 = VECTOR('',#5395,1.);+#5395 = DIRECTION('',(0.,-1.));+#5396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5397 = ORIENTED_EDGE('',*,*,#5398,.T.);+#5398 = EDGE_CURVE('',#5376,#5352,#5399,.T.);+#5399 = SURFACE_CURVE('',#5400,(#5404,#5411),.PCURVE_S1.);+#5400 = LINE('',#5401,#5402);+#5401 = CARTESIAN_POINT('',(1.95,0.225,0.72));+#5402 = VECTOR('',#5403,1.);+#5403 = DIRECTION('',(0.,-1.,0.));+#5404 = PCURVE('',#5336,#5405);+#5405 = DEFINITIONAL_REPRESENTATION('',(#5406),#5410);+#5406 = LINE('',#5407,#5408);+#5407 = CARTESIAN_POINT('',(0.,0.225));+#5408 = VECTOR('',#5409,1.);+#5409 = DIRECTION('',(0.,-1.));+#5410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5411 = PCURVE('',#5412,#5417);+#5412 = PLANE('',#5413);+#5413 = AXIS2_PLACEMENT_3D('',#5414,#5415,#5416);+#5414 = CARTESIAN_POINT('',(2.2625,0.,0.));+#5415 = DIRECTION('',(-0.917323062896,-0.,-0.398143690493));+#5416 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#5417 = DEFINITIONAL_REPRESENTATION('',(#5418),#5422);+#5418 = LINE('',#5419,#5420);+#5419 = CARTESIAN_POINT('',(0.784892508564,0.225));+#5420 = VECTOR('',#5421,1.);+#5421 = DIRECTION('',(0.,-1.));+#5422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5423 = ADVANCED_FACE('',(#5424),#5412,.T.);+#5424 = FACE_BOUND('',#5425,.T.);+#5425 = EDGE_LOOP('',(#5426,#5456,#5477,#5478));+#5426 = ORIENTED_EDGE('',*,*,#5427,.F.);+#5427 = EDGE_CURVE('',#5428,#5430,#5432,.T.);+#5428 = VERTEX_POINT('',#5429);+#5429 = CARTESIAN_POINT('',(2.2625,-0.225,0.));+#5430 = VERTEX_POINT('',#5431);+#5431 = CARTESIAN_POINT('',(2.2625,0.225,0.));+#5432 = SURFACE_CURVE('',#5433,(#5437,#5444),.PCURVE_S1.);+#5433 = LINE('',#5434,#5435);+#5434 = CARTESIAN_POINT('',(2.2625,-0.225,0.));+#5435 = VECTOR('',#5436,1.);+#5436 = DIRECTION('',(0.,1.,0.));+#5437 = PCURVE('',#5412,#5438);+#5438 = DEFINITIONAL_REPRESENTATION('',(#5439),#5443);+#5439 = LINE('',#5440,#5441);+#5440 = CARTESIAN_POINT('',(0.,-0.225));+#5441 = VECTOR('',#5442,1.);+#5442 = DIRECTION('',(0.,1.));+#5443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5444 = PCURVE('',#5445,#5450);+#5445 = PLANE('',#5446);+#5446 = AXIS2_PLACEMENT_3D('',#5447,#5448,#5449);+#5447 = CARTESIAN_POINT('',(3.03,0.,0.));+#5448 = DIRECTION('',(-0.,-0.,-1.));+#5449 = DIRECTION('',(-1.,0.,0.));+#5450 = DEFINITIONAL_REPRESENTATION('',(#5451),#5455);+#5451 = LINE('',#5452,#5453);+#5452 = CARTESIAN_POINT('',(0.7675,-0.225));+#5453 = VECTOR('',#5454,1.);+#5454 = DIRECTION('',(0.,1.));+#5455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5456 = ORIENTED_EDGE('',*,*,#5457,.T.);+#5457 = EDGE_CURVE('',#5428,#5352,#5458,.T.);+#5458 = SURFACE_CURVE('',#5459,(#5463,#5470),.PCURVE_S1.);+#5459 = LINE('',#5460,#5461);+#5460 = CARTESIAN_POINT('',(2.2625,-0.225,0.));+#5461 = VECTOR('',#5462,1.);+#5462 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#5463 = PCURVE('',#5412,#5464);+#5464 = DEFINITIONAL_REPRESENTATION('',(#5465),#5469);+#5465 = LINE('',#5466,#5467);+#5466 = CARTESIAN_POINT('',(0.,-0.225));+#5467 = VECTOR('',#5468,1.);+#5468 = DIRECTION('',(1.,0.));+#5469 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5470 = PCURVE('',#5178,#5471);+#5471 = DEFINITIONAL_REPRESENTATION('',(#5472),#5476);+#5472 = LINE('',#5473,#5474);+#5473 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#5474 = VECTOR('',#5475,1.);+#5475 = DIRECTION('',(0.917323062896,-0.398143690493));+#5476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5477 = ORIENTED_EDGE('',*,*,#5398,.F.);+#5478 = ORIENTED_EDGE('',*,*,#5479,.F.);+#5479 = EDGE_CURVE('',#5430,#5376,#5480,.T.);+#5480 = SURFACE_CURVE('',#5481,(#5485,#5492),.PCURVE_S1.);+#5481 = LINE('',#5482,#5483);+#5482 = CARTESIAN_POINT('',(2.2625,0.225,0.));+#5483 = VECTOR('',#5484,1.);+#5484 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#5485 = PCURVE('',#5412,#5486);+#5486 = DEFINITIONAL_REPRESENTATION('',(#5487),#5491);+#5487 = LINE('',#5488,#5489);+#5488 = CARTESIAN_POINT('',(0.,0.225));+#5489 = VECTOR('',#5490,1.);+#5490 = DIRECTION('',(1.,0.));+#5491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5492 = PCURVE('',#5234,#5493);+#5493 = DEFINITIONAL_REPRESENTATION('',(#5494),#5498);+#5494 = LINE('',#5495,#5496);+#5495 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#5496 = VECTOR('',#5497,1.);+#5497 = DIRECTION('',(0.917323062896,-0.398143690493));+#5498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5499 = ADVANCED_FACE('',(#5500),#5445,.T.);+#5500 = FACE_BOUND('',#5501,.T.);+#5501 = EDGE_LOOP('',(#5502,#5532,#5553,#5554));+#5502 = ORIENTED_EDGE('',*,*,#5503,.F.);+#5503 = EDGE_CURVE('',#5504,#5506,#5508,.T.);+#5504 = VERTEX_POINT('',#5505);+#5505 = CARTESIAN_POINT('',(3.03,-0.225,0.));+#5506 = VERTEX_POINT('',#5507);+#5507 = CARTESIAN_POINT('',(3.03,0.225,0.));+#5508 = SURFACE_CURVE('',#5509,(#5513,#5520),.PCURVE_S1.);+#5509 = LINE('',#5510,#5511);+#5510 = CARTESIAN_POINT('',(3.03,-0.225,0.));+#5511 = VECTOR('',#5512,1.);+#5512 = DIRECTION('',(0.,1.,0.));+#5513 = PCURVE('',#5445,#5514);+#5514 = DEFINITIONAL_REPRESENTATION('',(#5515),#5519);+#5515 = LINE('',#5516,#5517);+#5516 = CARTESIAN_POINT('',(0.,-0.225));+#5517 = VECTOR('',#5518,1.);+#5518 = DIRECTION('',(0.,1.));+#5519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5520 = PCURVE('',#5521,#5526);+#5521 = PLANE('',#5522);+#5522 = AXIS2_PLACEMENT_3D('',#5523,#5524,#5525);+#5523 = CARTESIAN_POINT('',(3.03,0.,0.15));+#5524 = DIRECTION('',(1.,0.,0.));+#5525 = DIRECTION('',(0.,0.,-1.));+#5526 = DEFINITIONAL_REPRESENTATION('',(#5527),#5531);+#5527 = LINE('',#5528,#5529);+#5528 = CARTESIAN_POINT('',(0.15,-0.225));+#5529 = VECTOR('',#5530,1.);+#5530 = DIRECTION('',(0.,1.));+#5531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5532 = ORIENTED_EDGE('',*,*,#5533,.T.);+#5533 = EDGE_CURVE('',#5504,#5428,#5534,.T.);+#5534 = SURFACE_CURVE('',#5535,(#5539,#5546),.PCURVE_S1.);+#5535 = LINE('',#5536,#5537);+#5536 = CARTESIAN_POINT('',(3.03,-0.225,0.));+#5537 = VECTOR('',#5538,1.);+#5538 = DIRECTION('',(-1.,0.,0.));+#5539 = PCURVE('',#5445,#5540);+#5540 = DEFINITIONAL_REPRESENTATION('',(#5541),#5545);+#5541 = LINE('',#5542,#5543);+#5542 = CARTESIAN_POINT('',(0.,-0.225));+#5543 = VECTOR('',#5544,1.);+#5544 = DIRECTION('',(1.,0.));+#5545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5546 = PCURVE('',#5178,#5547);+#5547 = DEFINITIONAL_REPRESENTATION('',(#5548),#5552);+#5548 = LINE('',#5549,#5550);+#5549 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#5550 = VECTOR('',#5551,1.);+#5551 = DIRECTION('',(0.,-1.));+#5552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5553 = ORIENTED_EDGE('',*,*,#5427,.T.);+#5554 = ORIENTED_EDGE('',*,*,#5555,.F.);+#5555 = EDGE_CURVE('',#5506,#5430,#5556,.T.);+#5556 = SURFACE_CURVE('',#5557,(#5561,#5568),.PCURVE_S1.);+#5557 = LINE('',#5558,#5559);+#5558 = CARTESIAN_POINT('',(3.03,0.225,0.));+#5559 = VECTOR('',#5560,1.);+#5560 = DIRECTION('',(-1.,0.,0.));+#5561 = PCURVE('',#5445,#5562);+#5562 = DEFINITIONAL_REPRESENTATION('',(#5563),#5567);+#5563 = LINE('',#5564,#5565);+#5564 = CARTESIAN_POINT('',(0.,0.225));+#5565 = VECTOR('',#5566,1.);+#5566 = DIRECTION('',(1.,0.));+#5567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5568 = PCURVE('',#5234,#5569);+#5569 = DEFINITIONAL_REPRESENTATION('',(#5570),#5574);+#5570 = LINE('',#5571,#5572);+#5571 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#5572 = VECTOR('',#5573,1.);+#5573 = DIRECTION('',(0.,-1.));+#5574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5575 = ADVANCED_FACE('',(#5576),#5521,.T.);+#5576 = FACE_BOUND('',#5577,.T.);+#5577 = EDGE_LOOP('',(#5578,#5608,#5629,#5630));+#5578 = ORIENTED_EDGE('',*,*,#5579,.F.);+#5579 = EDGE_CURVE('',#5580,#5582,#5584,.T.);+#5580 = VERTEX_POINT('',#5581);+#5581 = CARTESIAN_POINT('',(3.03,-0.225,0.15));+#5582 = VERTEX_POINT('',#5583);+#5583 = CARTESIAN_POINT('',(3.03,0.225,0.15));+#5584 = SURFACE_CURVE('',#5585,(#5589,#5596),.PCURVE_S1.);+#5585 = LINE('',#5586,#5587);+#5586 = CARTESIAN_POINT('',(3.03,-0.225,0.15));+#5587 = VECTOR('',#5588,1.);+#5588 = DIRECTION('',(0.,1.,0.));+#5589 = PCURVE('',#5521,#5590);+#5590 = DEFINITIONAL_REPRESENTATION('',(#5591),#5595);+#5591 = LINE('',#5592,#5593);+#5592 = CARTESIAN_POINT('',(0.,-0.225));+#5593 = VECTOR('',#5594,1.);+#5594 = DIRECTION('',(0.,1.));+#5595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5596 = PCURVE('',#5597,#5602);+#5597 = PLANE('',#5598);+#5598 = AXIS2_PLACEMENT_3D('',#5599,#5600,#5601);+#5599 = CARTESIAN_POINT('',(2.4125,0.,0.15));+#5600 = DIRECTION('',(0.,0.,1.));+#5601 = DIRECTION('',(1.,0.,0.));+#5602 = DEFINITIONAL_REPRESENTATION('',(#5603),#5607);+#5603 = LINE('',#5604,#5605);+#5604 = CARTESIAN_POINT('',(0.6175,-0.225));+#5605 = VECTOR('',#5606,1.);+#5606 = DIRECTION('',(0.,1.));+#5607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5608 = ORIENTED_EDGE('',*,*,#5609,.T.);+#5609 = EDGE_CURVE('',#5580,#5504,#5610,.T.);+#5610 = SURFACE_CURVE('',#5611,(#5615,#5622),.PCURVE_S1.);+#5611 = LINE('',#5612,#5613);+#5612 = CARTESIAN_POINT('',(3.03,-0.225,0.15));+#5613 = VECTOR('',#5614,1.);+#5614 = DIRECTION('',(0.,0.,-1.));+#5615 = PCURVE('',#5521,#5616);+#5616 = DEFINITIONAL_REPRESENTATION('',(#5617),#5621);+#5617 = LINE('',#5618,#5619);+#5618 = CARTESIAN_POINT('',(0.,-0.225));+#5619 = VECTOR('',#5620,1.);+#5620 = DIRECTION('',(1.,0.));+#5621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5622 = PCURVE('',#5178,#5623);+#5623 = DEFINITIONAL_REPRESENTATION('',(#5624),#5628);+#5624 = LINE('',#5625,#5626);+#5625 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#5626 = VECTOR('',#5627,1.);+#5627 = DIRECTION('',(-1.,0.));+#5628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5629 = ORIENTED_EDGE('',*,*,#5503,.T.);+#5630 = ORIENTED_EDGE('',*,*,#5631,.F.);+#5631 = EDGE_CURVE('',#5582,#5506,#5632,.T.);+#5632 = SURFACE_CURVE('',#5633,(#5637,#5644),.PCURVE_S1.);+#5633 = LINE('',#5634,#5635);+#5634 = CARTESIAN_POINT('',(3.03,0.225,0.15));+#5635 = VECTOR('',#5636,1.);+#5636 = DIRECTION('',(0.,0.,-1.));+#5637 = PCURVE('',#5521,#5638);+#5638 = DEFINITIONAL_REPRESENTATION('',(#5639),#5643);+#5639 = LINE('',#5640,#5641);+#5640 = CARTESIAN_POINT('',(0.,0.225));+#5641 = VECTOR('',#5642,1.);+#5642 = DIRECTION('',(1.,0.));+#5643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5644 = PCURVE('',#5234,#5645);+#5645 = DEFINITIONAL_REPRESENTATION('',(#5646),#5650);+#5646 = LINE('',#5647,#5648);+#5647 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#5648 = VECTOR('',#5649,1.);+#5649 = DIRECTION('',(-1.,0.));+#5650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5651 = ADVANCED_FACE('',(#5652),#5597,.T.);+#5652 = FACE_BOUND('',#5653,.T.);+#5653 = EDGE_LOOP('',(#5654,#5679,#5700,#5701));+#5654 = ORIENTED_EDGE('',*,*,#5655,.F.);+#5655 = EDGE_CURVE('',#5656,#5658,#5660,.T.);+#5656 = VERTEX_POINT('',#5657);+#5657 = CARTESIAN_POINT('',(2.4125,-0.225,0.15));+#5658 = VERTEX_POINT('',#5659);+#5659 = CARTESIAN_POINT('',(2.4125,0.225,0.15));+#5660 = SURFACE_CURVE('',#5661,(#5665,#5672),.PCURVE_S1.);+#5661 = LINE('',#5662,#5663);+#5662 = CARTESIAN_POINT('',(2.4125,-0.225,0.15));+#5663 = VECTOR('',#5664,1.);+#5664 = DIRECTION('',(0.,1.,0.));+#5665 = PCURVE('',#5597,#5666);+#5666 = DEFINITIONAL_REPRESENTATION('',(#5667),#5671);+#5667 = LINE('',#5668,#5669);+#5668 = CARTESIAN_POINT('',(0.,-0.225));+#5669 = VECTOR('',#5670,1.);+#5670 = DIRECTION('',(0.,1.));+#5671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5672 = PCURVE('',#5206,#5673);+#5673 = DEFINITIONAL_REPRESENTATION('',(#5674),#5678);+#5674 = LINE('',#5675,#5676);+#5675 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#5676 = VECTOR('',#5677,1.);+#5677 = DIRECTION('',(0.,1.));+#5678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5679 = ORIENTED_EDGE('',*,*,#5680,.T.);+#5680 = EDGE_CURVE('',#5656,#5580,#5681,.T.);+#5681 = SURFACE_CURVE('',#5682,(#5686,#5693),.PCURVE_S1.);+#5682 = LINE('',#5683,#5684);+#5683 = CARTESIAN_POINT('',(2.4125,-0.225,0.15));+#5684 = VECTOR('',#5685,1.);+#5685 = DIRECTION('',(1.,0.,0.));+#5686 = PCURVE('',#5597,#5687);+#5687 = DEFINITIONAL_REPRESENTATION('',(#5688),#5692);+#5688 = LINE('',#5689,#5690);+#5689 = CARTESIAN_POINT('',(0.,-0.225));+#5690 = VECTOR('',#5691,1.);+#5691 = DIRECTION('',(1.,0.));+#5692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5693 = PCURVE('',#5178,#5694);+#5694 = DEFINITIONAL_REPRESENTATION('',(#5695),#5699);+#5695 = LINE('',#5696,#5697);+#5696 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#5697 = VECTOR('',#5698,1.);+#5698 = DIRECTION('',(0.,1.));+#5699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5700 = ORIENTED_EDGE('',*,*,#5579,.T.);+#5701 = ORIENTED_EDGE('',*,*,#5702,.F.);+#5702 = EDGE_CURVE('',#5658,#5582,#5703,.T.);+#5703 = SURFACE_CURVE('',#5704,(#5708,#5715),.PCURVE_S1.);+#5704 = LINE('',#5705,#5706);+#5705 = CARTESIAN_POINT('',(2.4125,0.225,0.15));+#5706 = VECTOR('',#5707,1.);+#5707 = DIRECTION('',(1.,0.,0.));+#5708 = PCURVE('',#5597,#5709);+#5709 = DEFINITIONAL_REPRESENTATION('',(#5710),#5714);+#5710 = LINE('',#5711,#5712);+#5711 = CARTESIAN_POINT('',(0.,0.225));+#5712 = VECTOR('',#5713,1.);+#5713 = DIRECTION('',(1.,0.));+#5714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5715 = PCURVE('',#5234,#5716);+#5716 = DEFINITIONAL_REPRESENTATION('',(#5717),#5721);+#5717 = LINE('',#5718,#5719);+#5718 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#5719 = VECTOR('',#5720,1.);+#5720 = DIRECTION('',(0.,1.));+#5721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5722 = ADVANCED_FACE('',(#5723),#5234,.T.);+#5723 = FACE_BOUND('',#5724,.T.);+#5724 = EDGE_LOOP('',(#5725,#5726,#5747,#5748,#5749,#5750,#5751,#5752));+#5725 = ORIENTED_EDGE('',*,*,#5218,.T.);+#5726 = ORIENTED_EDGE('',*,*,#5727,.T.);+#5727 = EDGE_CURVE('',#5191,#5658,#5728,.T.);+#5728 = SURFACE_CURVE('',#5729,(#5733,#5740),.PCURVE_S1.);+#5729 = LINE('',#5730,#5731);+#5730 = CARTESIAN_POINT('',(2.1,0.225,0.87));+#5731 = VECTOR('',#5732,1.);+#5732 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#5733 = PCURVE('',#5234,#5734);+#5734 = DEFINITIONAL_REPRESENTATION('',(#5735),#5739);+#5735 = LINE('',#5736,#5737);+#5736 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#5737 = VECTOR('',#5738,1.);+#5738 = DIRECTION('',(-0.917323062896,0.398143690493));+#5739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5740 = PCURVE('',#5206,#5741);+#5741 = DEFINITIONAL_REPRESENTATION('',(#5742),#5746);+#5742 = LINE('',#5743,#5744);+#5743 = CARTESIAN_POINT('',(0.,0.225));+#5744 = VECTOR('',#5745,1.);+#5745 = DIRECTION('',(1.,0.));+#5746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5747 = ORIENTED_EDGE('',*,*,#5702,.T.);+#5748 = ORIENTED_EDGE('',*,*,#5631,.T.);+#5749 = ORIENTED_EDGE('',*,*,#5555,.T.);+#5750 = ORIENTED_EDGE('',*,*,#5479,.T.);+#5751 = ORIENTED_EDGE('',*,*,#5375,.T.);+#5752 = ORIENTED_EDGE('',*,*,#5299,.T.);+#5753 = ADVANCED_FACE('',(#5754),#5206,.T.);+#5754 = FACE_BOUND('',#5755,.T.);+#5755 = EDGE_LOOP('',(#5756,#5757,#5778,#5779));+#5756 = ORIENTED_EDGE('',*,*,#5190,.F.);+#5757 = ORIENTED_EDGE('',*,*,#5758,.T.);+#5758 = EDGE_CURVE('',#5158,#5656,#5759,.T.);+#5759 = SURFACE_CURVE('',#5760,(#5764,#5771),.PCURVE_S1.);+#5760 = LINE('',#5761,#5762);+#5761 = CARTESIAN_POINT('',(2.1,-0.225,0.87));+#5762 = VECTOR('',#5763,1.);+#5763 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#5764 = PCURVE('',#5206,#5765);+#5765 = DEFINITIONAL_REPRESENTATION('',(#5766),#5770);+#5766 = LINE('',#5767,#5768);+#5767 = CARTESIAN_POINT('',(0.,-0.225));+#5768 = VECTOR('',#5769,1.);+#5769 = DIRECTION('',(1.,0.));+#5770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5771 = PCURVE('',#5178,#5772);+#5772 = DEFINITIONAL_REPRESENTATION('',(#5773),#5777);+#5773 = LINE('',#5774,#5775);+#5774 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#5775 = VECTOR('',#5776,1.);+#5776 = DIRECTION('',(-0.917323062896,0.398143690493));+#5777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5778 = ORIENTED_EDGE('',*,*,#5655,.T.);+#5779 = ORIENTED_EDGE('',*,*,#5727,.F.);+#5780 = ADVANCED_FACE('',(#5781),#5178,.F.);+#5781 = FACE_BOUND('',#5782,.F.);+#5782 = EDGE_LOOP('',(#5783,#5784,#5785,#5786,#5787,#5788,#5789,#5790));+#5783 = ORIENTED_EDGE('',*,*,#5155,.T.);+#5784 = ORIENTED_EDGE('',*,*,#5758,.T.);+#5785 = ORIENTED_EDGE('',*,*,#5680,.T.);+#5786 = ORIENTED_EDGE('',*,*,#5609,.T.);+#5787 = ORIENTED_EDGE('',*,*,#5533,.T.);+#5788 = ORIENTED_EDGE('',*,*,#5457,.T.);+#5789 = ORIENTED_EDGE('',*,*,#5351,.T.);+#5790 = ORIENTED_EDGE('',*,*,#5275,.T.);+#5791 = MANIFOLD_SOLID_BREP('',#5792);+#5792 = CLOSED_SHELL('',(#5793,#5913,#5989,#6065,#6141,#6217,#6293,#6364+ ,#6395,#6422));+#5793 = ADVANCED_FACE('',(#5794),#5808,.T.);+#5794 = FACE_BOUND('',#5795,.T.);+#5795 = EDGE_LOOP('',(#5796,#5831,#5859,#5887));+#5796 = ORIENTED_EDGE('',*,*,#5797,.T.);+#5797 = EDGE_CURVE('',#5798,#5800,#5802,.T.);+#5798 = VERTEX_POINT('',#5799);+#5799 = CARTESIAN_POINT('',(1.9,0.775,0.87));+#5800 = VERTEX_POINT('',#5801);+#5801 = CARTESIAN_POINT('',(2.1,0.775,0.87));+#5802 = SURFACE_CURVE('',#5803,(#5807,#5819),.PCURVE_S1.);+#5803 = LINE('',#5804,#5805);+#5804 = CARTESIAN_POINT('',(1.9,0.775,0.87));+#5805 = VECTOR('',#5806,1.);+#5806 = DIRECTION('',(1.,0.,0.));+#5807 = PCURVE('',#5808,#5813);+#5808 = PLANE('',#5809);+#5809 = AXIS2_PLACEMENT_3D('',#5810,#5811,#5812);+#5810 = CARTESIAN_POINT('',(1.9,1.,0.87));+#5811 = DIRECTION('',(0.,0.,1.));+#5812 = DIRECTION('',(1.,0.,0.));+#5813 = DEFINITIONAL_REPRESENTATION('',(#5814),#5818);+#5814 = LINE('',#5815,#5816);+#5815 = CARTESIAN_POINT('',(0.,-0.225));+#5816 = VECTOR('',#5817,1.);+#5817 = DIRECTION('',(1.,0.));+#5818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5819 = PCURVE('',#5820,#5825);+#5820 = PLANE('',#5821);+#5821 = AXIS2_PLACEMENT_3D('',#5822,#5823,#5824);+#5822 = CARTESIAN_POINT('',(2.38850950278,0.775,0.318416529686));+#5823 = DIRECTION('',(0.,1.,0.));+#5824 = DIRECTION('',(0.,0.,1.));+#5825 = DEFINITIONAL_REPRESENTATION('',(#5826),#5830);+#5826 = LINE('',#5827,#5828);+#5827 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#5828 = VECTOR('',#5829,1.);+#5829 = DIRECTION('',(0.,1.));+#5830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5831 = ORIENTED_EDGE('',*,*,#5832,.T.);+#5832 = EDGE_CURVE('',#5800,#5833,#5835,.T.);+#5833 = VERTEX_POINT('',#5834);+#5834 = CARTESIAN_POINT('',(2.1,1.225,0.87));+#5835 = SURFACE_CURVE('',#5836,(#5840,#5847),.PCURVE_S1.);+#5836 = LINE('',#5837,#5838);+#5837 = CARTESIAN_POINT('',(2.1,0.775,0.87));+#5838 = VECTOR('',#5839,1.);+#5839 = DIRECTION('',(0.,1.,0.));+#5840 = PCURVE('',#5808,#5841);+#5841 = DEFINITIONAL_REPRESENTATION('',(#5842),#5846);+#5842 = LINE('',#5843,#5844);+#5843 = CARTESIAN_POINT('',(0.2,-0.225));+#5844 = VECTOR('',#5845,1.);+#5845 = DIRECTION('',(0.,1.));+#5846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5847 = PCURVE('',#5848,#5853);+#5848 = PLANE('',#5849);+#5849 = AXIS2_PLACEMENT_3D('',#5850,#5851,#5852);+#5850 = CARTESIAN_POINT('',(2.1,1.,0.87));+#5851 = DIRECTION('',(0.917323062896,0.,0.398143690493));+#5852 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#5853 = DEFINITIONAL_REPRESENTATION('',(#5854),#5858);+#5854 = LINE('',#5855,#5856);+#5855 = CARTESIAN_POINT('',(0.,-0.225));+#5856 = VECTOR('',#5857,1.);+#5857 = DIRECTION('',(0.,1.));+#5858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5859 = ORIENTED_EDGE('',*,*,#5860,.F.);+#5860 = EDGE_CURVE('',#5861,#5833,#5863,.T.);+#5861 = VERTEX_POINT('',#5862);+#5862 = CARTESIAN_POINT('',(1.9,1.225,0.87));+#5863 = SURFACE_CURVE('',#5864,(#5868,#5875),.PCURVE_S1.);+#5864 = LINE('',#5865,#5866);+#5865 = CARTESIAN_POINT('',(1.9,1.225,0.87));+#5866 = VECTOR('',#5867,1.);+#5867 = DIRECTION('',(1.,0.,0.));+#5868 = PCURVE('',#5808,#5869);+#5869 = DEFINITIONAL_REPRESENTATION('',(#5870),#5874);+#5870 = LINE('',#5871,#5872);+#5871 = CARTESIAN_POINT('',(0.,0.225));+#5872 = VECTOR('',#5873,1.);+#5873 = DIRECTION('',(1.,0.));+#5874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5875 = PCURVE('',#5876,#5881);+#5876 = PLANE('',#5877);+#5877 = AXIS2_PLACEMENT_3D('',#5878,#5879,#5880);+#5878 = CARTESIAN_POINT('',(2.38850950278,1.225,0.318416529686));+#5879 = DIRECTION('',(0.,1.,0.));+#5880 = DIRECTION('',(0.,0.,1.));+#5881 = DEFINITIONAL_REPRESENTATION('',(#5882),#5886);+#5882 = LINE('',#5883,#5884);+#5883 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#5884 = VECTOR('',#5885,1.);+#5885 = DIRECTION('',(0.,1.));+#5886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5887 = ORIENTED_EDGE('',*,*,#5888,.T.);+#5888 = EDGE_CURVE('',#5861,#5798,#5889,.T.);+#5889 = SURFACE_CURVE('',#5890,(#5894,#5901),.PCURVE_S1.);+#5890 = LINE('',#5891,#5892);+#5891 = CARTESIAN_POINT('',(1.9,1.225,0.87));+#5892 = VECTOR('',#5893,1.);+#5893 = DIRECTION('',(0.,-1.,0.));+#5894 = PCURVE('',#5808,#5895);+#5895 = DEFINITIONAL_REPRESENTATION('',(#5896),#5900);+#5896 = LINE('',#5897,#5898);+#5897 = CARTESIAN_POINT('',(0.,0.225));+#5898 = VECTOR('',#5899,1.);+#5899 = DIRECTION('',(0.,-1.));+#5900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5901 = PCURVE('',#5902,#5907);+#5902 = PLANE('',#5903);+#5903 = AXIS2_PLACEMENT_3D('',#5904,#5905,#5906);+#5904 = CARTESIAN_POINT('',(1.9,1.,0.72));+#5905 = DIRECTION('',(-1.,0.,0.));+#5906 = DIRECTION('',(0.,0.,1.));+#5907 = DEFINITIONAL_REPRESENTATION('',(#5908),#5912);+#5908 = LINE('',#5909,#5910);+#5909 = CARTESIAN_POINT('',(0.15,0.225));+#5910 = VECTOR('',#5911,1.);+#5911 = DIRECTION('',(0.,-1.));+#5912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5913 = ADVANCED_FACE('',(#5914),#5902,.T.);+#5914 = FACE_BOUND('',#5915,.T.);+#5915 = EDGE_LOOP('',(#5916,#5939,#5940,#5963));+#5916 = ORIENTED_EDGE('',*,*,#5917,.T.);+#5917 = EDGE_CURVE('',#5918,#5798,#5920,.T.);+#5918 = VERTEX_POINT('',#5919);+#5919 = CARTESIAN_POINT('',(1.9,0.775,0.72));+#5920 = SURFACE_CURVE('',#5921,(#5925,#5932),.PCURVE_S1.);+#5921 = LINE('',#5922,#5923);+#5922 = CARTESIAN_POINT('',(1.9,0.775,0.72));+#5923 = VECTOR('',#5924,1.);+#5924 = DIRECTION('',(0.,0.,1.));+#5925 = PCURVE('',#5902,#5926);+#5926 = DEFINITIONAL_REPRESENTATION('',(#5927),#5931);+#5927 = LINE('',#5928,#5929);+#5928 = CARTESIAN_POINT('',(0.,-0.225));+#5929 = VECTOR('',#5930,1.);+#5930 = DIRECTION('',(1.,0.));+#5931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5932 = PCURVE('',#5820,#5933);+#5933 = DEFINITIONAL_REPRESENTATION('',(#5934),#5938);+#5934 = LINE('',#5935,#5936);+#5935 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#5936 = VECTOR('',#5937,1.);+#5937 = DIRECTION('',(1.,0.));+#5938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5939 = ORIENTED_EDGE('',*,*,#5888,.F.);+#5940 = ORIENTED_EDGE('',*,*,#5941,.F.);+#5941 = EDGE_CURVE('',#5942,#5861,#5944,.T.);+#5942 = VERTEX_POINT('',#5943);+#5943 = CARTESIAN_POINT('',(1.9,1.225,0.72));+#5944 = SURFACE_CURVE('',#5945,(#5949,#5956),.PCURVE_S1.);+#5945 = LINE('',#5946,#5947);+#5946 = CARTESIAN_POINT('',(1.9,1.225,0.72));+#5947 = VECTOR('',#5948,1.);+#5948 = DIRECTION('',(0.,0.,1.));+#5949 = PCURVE('',#5902,#5950);+#5950 = DEFINITIONAL_REPRESENTATION('',(#5951),#5955);+#5951 = LINE('',#5952,#5953);+#5952 = CARTESIAN_POINT('',(0.,0.225));+#5953 = VECTOR('',#5954,1.);+#5954 = DIRECTION('',(1.,0.));+#5955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5956 = PCURVE('',#5876,#5957);+#5957 = DEFINITIONAL_REPRESENTATION('',(#5958),#5962);+#5958 = LINE('',#5959,#5960);+#5959 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#5960 = VECTOR('',#5961,1.);+#5961 = DIRECTION('',(1.,0.));+#5962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5963 = ORIENTED_EDGE('',*,*,#5964,.T.);+#5964 = EDGE_CURVE('',#5942,#5918,#5965,.T.);+#5965 = SURFACE_CURVE('',#5966,(#5970,#5977),.PCURVE_S1.);+#5966 = LINE('',#5967,#5968);+#5967 = CARTESIAN_POINT('',(1.9,1.225,0.72));+#5968 = VECTOR('',#5969,1.);+#5969 = DIRECTION('',(0.,-1.,0.));+#5970 = PCURVE('',#5902,#5971);+#5971 = DEFINITIONAL_REPRESENTATION('',(#5972),#5976);+#5972 = LINE('',#5973,#5974);+#5973 = CARTESIAN_POINT('',(0.,0.225));+#5974 = VECTOR('',#5975,1.);+#5975 = DIRECTION('',(0.,-1.));+#5976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5977 = PCURVE('',#5978,#5983);+#5978 = PLANE('',#5979);+#5979 = AXIS2_PLACEMENT_3D('',#5980,#5981,#5982);+#5980 = CARTESIAN_POINT('',(1.95,1.,0.72));+#5981 = DIRECTION('',(-0.,-0.,-1.));+#5982 = DIRECTION('',(-1.,0.,0.));+#5983 = DEFINITIONAL_REPRESENTATION('',(#5984),#5988);+#5984 = LINE('',#5985,#5986);+#5985 = CARTESIAN_POINT('',(5.E-02,0.225));+#5986 = VECTOR('',#5987,1.);+#5987 = DIRECTION('',(0.,-1.));+#5988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#5989 = ADVANCED_FACE('',(#5990),#5978,.T.);+#5990 = FACE_BOUND('',#5991,.T.);+#5991 = EDGE_LOOP('',(#5992,#6015,#6016,#6039));+#5992 = ORIENTED_EDGE('',*,*,#5993,.T.);+#5993 = EDGE_CURVE('',#5994,#5918,#5996,.T.);+#5994 = VERTEX_POINT('',#5995);+#5995 = CARTESIAN_POINT('',(1.95,0.775,0.72));+#5996 = SURFACE_CURVE('',#5997,(#6001,#6008),.PCURVE_S1.);+#5997 = LINE('',#5998,#5999);+#5998 = CARTESIAN_POINT('',(1.95,0.775,0.72));+#5999 = VECTOR('',#6000,1.);+#6000 = DIRECTION('',(-1.,0.,0.));+#6001 = PCURVE('',#5978,#6002);+#6002 = DEFINITIONAL_REPRESENTATION('',(#6003),#6007);+#6003 = LINE('',#6004,#6005);+#6004 = CARTESIAN_POINT('',(0.,-0.225));+#6005 = VECTOR('',#6006,1.);+#6006 = DIRECTION('',(1.,0.));+#6007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6008 = PCURVE('',#5820,#6009);+#6009 = DEFINITIONAL_REPRESENTATION('',(#6010),#6014);+#6010 = LINE('',#6011,#6012);+#6011 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#6012 = VECTOR('',#6013,1.);+#6013 = DIRECTION('',(0.,-1.));+#6014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6015 = ORIENTED_EDGE('',*,*,#5964,.F.);+#6016 = ORIENTED_EDGE('',*,*,#6017,.F.);+#6017 = EDGE_CURVE('',#6018,#5942,#6020,.T.);+#6018 = VERTEX_POINT('',#6019);+#6019 = CARTESIAN_POINT('',(1.95,1.225,0.72));+#6020 = SURFACE_CURVE('',#6021,(#6025,#6032),.PCURVE_S1.);+#6021 = LINE('',#6022,#6023);+#6022 = CARTESIAN_POINT('',(1.95,1.225,0.72));+#6023 = VECTOR('',#6024,1.);+#6024 = DIRECTION('',(-1.,0.,0.));+#6025 = PCURVE('',#5978,#6026);+#6026 = DEFINITIONAL_REPRESENTATION('',(#6027),#6031);+#6027 = LINE('',#6028,#6029);+#6028 = CARTESIAN_POINT('',(0.,0.225));+#6029 = VECTOR('',#6030,1.);+#6030 = DIRECTION('',(1.,0.));+#6031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6032 = PCURVE('',#5876,#6033);+#6033 = DEFINITIONAL_REPRESENTATION('',(#6034),#6038);+#6034 = LINE('',#6035,#6036);+#6035 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#6036 = VECTOR('',#6037,1.);+#6037 = DIRECTION('',(0.,-1.));+#6038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6039 = ORIENTED_EDGE('',*,*,#6040,.T.);+#6040 = EDGE_CURVE('',#6018,#5994,#6041,.T.);+#6041 = SURFACE_CURVE('',#6042,(#6046,#6053),.PCURVE_S1.);+#6042 = LINE('',#6043,#6044);+#6043 = CARTESIAN_POINT('',(1.95,1.225,0.72));+#6044 = VECTOR('',#6045,1.);+#6045 = DIRECTION('',(0.,-1.,0.));+#6046 = PCURVE('',#5978,#6047);+#6047 = DEFINITIONAL_REPRESENTATION('',(#6048),#6052);+#6048 = LINE('',#6049,#6050);+#6049 = CARTESIAN_POINT('',(0.,0.225));+#6050 = VECTOR('',#6051,1.);+#6051 = DIRECTION('',(0.,-1.));+#6052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6053 = PCURVE('',#6054,#6059);+#6054 = PLANE('',#6055);+#6055 = AXIS2_PLACEMENT_3D('',#6056,#6057,#6058);+#6056 = CARTESIAN_POINT('',(2.2625,1.,0.));+#6057 = DIRECTION('',(-0.917323062896,-0.,-0.398143690493));+#6058 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#6059 = DEFINITIONAL_REPRESENTATION('',(#6060),#6064);+#6060 = LINE('',#6061,#6062);+#6061 = CARTESIAN_POINT('',(0.784892508564,0.225));+#6062 = VECTOR('',#6063,1.);+#6063 = DIRECTION('',(0.,-1.));+#6064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6065 = ADVANCED_FACE('',(#6066),#6054,.T.);+#6066 = FACE_BOUND('',#6067,.T.);+#6067 = EDGE_LOOP('',(#6068,#6098,#6119,#6120));+#6068 = ORIENTED_EDGE('',*,*,#6069,.F.);+#6069 = EDGE_CURVE('',#6070,#6072,#6074,.T.);+#6070 = VERTEX_POINT('',#6071);+#6071 = CARTESIAN_POINT('',(2.2625,0.775,0.));+#6072 = VERTEX_POINT('',#6073);+#6073 = CARTESIAN_POINT('',(2.2625,1.225,0.));+#6074 = SURFACE_CURVE('',#6075,(#6079,#6086),.PCURVE_S1.);+#6075 = LINE('',#6076,#6077);+#6076 = CARTESIAN_POINT('',(2.2625,0.775,0.));+#6077 = VECTOR('',#6078,1.);+#6078 = DIRECTION('',(0.,1.,0.));+#6079 = PCURVE('',#6054,#6080);+#6080 = DEFINITIONAL_REPRESENTATION('',(#6081),#6085);+#6081 = LINE('',#6082,#6083);+#6082 = CARTESIAN_POINT('',(0.,-0.225));+#6083 = VECTOR('',#6084,1.);+#6084 = DIRECTION('',(0.,1.));+#6085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6086 = PCURVE('',#6087,#6092);+#6087 = PLANE('',#6088);+#6088 = AXIS2_PLACEMENT_3D('',#6089,#6090,#6091);+#6089 = CARTESIAN_POINT('',(3.03,1.,0.));+#6090 = DIRECTION('',(-0.,-0.,-1.));+#6091 = DIRECTION('',(-1.,0.,0.));+#6092 = DEFINITIONAL_REPRESENTATION('',(#6093),#6097);+#6093 = LINE('',#6094,#6095);+#6094 = CARTESIAN_POINT('',(0.7675,-0.225));+#6095 = VECTOR('',#6096,1.);+#6096 = DIRECTION('',(0.,1.));+#6097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6098 = ORIENTED_EDGE('',*,*,#6099,.T.);+#6099 = EDGE_CURVE('',#6070,#5994,#6100,.T.);+#6100 = SURFACE_CURVE('',#6101,(#6105,#6112),.PCURVE_S1.);+#6101 = LINE('',#6102,#6103);+#6102 = CARTESIAN_POINT('',(2.2625,0.775,0.));+#6103 = VECTOR('',#6104,1.);+#6104 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#6105 = PCURVE('',#6054,#6106);+#6106 = DEFINITIONAL_REPRESENTATION('',(#6107),#6111);+#6107 = LINE('',#6108,#6109);+#6108 = CARTESIAN_POINT('',(0.,-0.225));+#6109 = VECTOR('',#6110,1.);+#6110 = DIRECTION('',(1.,0.));+#6111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6112 = PCURVE('',#5820,#6113);+#6113 = DEFINITIONAL_REPRESENTATION('',(#6114),#6118);+#6114 = LINE('',#6115,#6116);+#6115 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#6116 = VECTOR('',#6117,1.);+#6117 = DIRECTION('',(0.917323062896,-0.398143690493));+#6118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6119 = ORIENTED_EDGE('',*,*,#6040,.F.);+#6120 = ORIENTED_EDGE('',*,*,#6121,.F.);+#6121 = EDGE_CURVE('',#6072,#6018,#6122,.T.);+#6122 = SURFACE_CURVE('',#6123,(#6127,#6134),.PCURVE_S1.);+#6123 = LINE('',#6124,#6125);+#6124 = CARTESIAN_POINT('',(2.2625,1.225,0.));+#6125 = VECTOR('',#6126,1.);+#6126 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#6127 = PCURVE('',#6054,#6128);+#6128 = DEFINITIONAL_REPRESENTATION('',(#6129),#6133);+#6129 = LINE('',#6130,#6131);+#6130 = CARTESIAN_POINT('',(0.,0.225));+#6131 = VECTOR('',#6132,1.);+#6132 = DIRECTION('',(1.,0.));+#6133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6134 = PCURVE('',#5876,#6135);+#6135 = DEFINITIONAL_REPRESENTATION('',(#6136),#6140);+#6136 = LINE('',#6137,#6138);+#6137 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#6138 = VECTOR('',#6139,1.);+#6139 = DIRECTION('',(0.917323062896,-0.398143690493));+#6140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6141 = ADVANCED_FACE('',(#6142),#6087,.T.);+#6142 = FACE_BOUND('',#6143,.T.);+#6143 = EDGE_LOOP('',(#6144,#6174,#6195,#6196));+#6144 = ORIENTED_EDGE('',*,*,#6145,.F.);+#6145 = EDGE_CURVE('',#6146,#6148,#6150,.T.);+#6146 = VERTEX_POINT('',#6147);+#6147 = CARTESIAN_POINT('',(3.03,0.775,0.));+#6148 = VERTEX_POINT('',#6149);+#6149 = CARTESIAN_POINT('',(3.03,1.225,0.));+#6150 = SURFACE_CURVE('',#6151,(#6155,#6162),.PCURVE_S1.);+#6151 = LINE('',#6152,#6153);+#6152 = CARTESIAN_POINT('',(3.03,0.775,0.));+#6153 = VECTOR('',#6154,1.);+#6154 = DIRECTION('',(0.,1.,0.));+#6155 = PCURVE('',#6087,#6156);+#6156 = DEFINITIONAL_REPRESENTATION('',(#6157),#6161);+#6157 = LINE('',#6158,#6159);+#6158 = CARTESIAN_POINT('',(0.,-0.225));+#6159 = VECTOR('',#6160,1.);+#6160 = DIRECTION('',(0.,1.));+#6161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6162 = PCURVE('',#6163,#6168);+#6163 = PLANE('',#6164);+#6164 = AXIS2_PLACEMENT_3D('',#6165,#6166,#6167);+#6165 = CARTESIAN_POINT('',(3.03,1.,0.15));+#6166 = DIRECTION('',(1.,0.,0.));+#6167 = DIRECTION('',(0.,0.,-1.));+#6168 = DEFINITIONAL_REPRESENTATION('',(#6169),#6173);+#6169 = LINE('',#6170,#6171);+#6170 = CARTESIAN_POINT('',(0.15,-0.225));+#6171 = VECTOR('',#6172,1.);+#6172 = DIRECTION('',(0.,1.));+#6173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6174 = ORIENTED_EDGE('',*,*,#6175,.T.);+#6175 = EDGE_CURVE('',#6146,#6070,#6176,.T.);+#6176 = SURFACE_CURVE('',#6177,(#6181,#6188),.PCURVE_S1.);+#6177 = LINE('',#6178,#6179);+#6178 = CARTESIAN_POINT('',(3.03,0.775,0.));+#6179 = VECTOR('',#6180,1.);+#6180 = DIRECTION('',(-1.,0.,0.));+#6181 = PCURVE('',#6087,#6182);+#6182 = DEFINITIONAL_REPRESENTATION('',(#6183),#6187);+#6183 = LINE('',#6184,#6185);+#6184 = CARTESIAN_POINT('',(0.,-0.225));+#6185 = VECTOR('',#6186,1.);+#6186 = DIRECTION('',(1.,0.));+#6187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6188 = PCURVE('',#5820,#6189);+#6189 = DEFINITIONAL_REPRESENTATION('',(#6190),#6194);+#6190 = LINE('',#6191,#6192);+#6191 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#6192 = VECTOR('',#6193,1.);+#6193 = DIRECTION('',(0.,-1.));+#6194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6195 = ORIENTED_EDGE('',*,*,#6069,.T.);+#6196 = ORIENTED_EDGE('',*,*,#6197,.F.);+#6197 = EDGE_CURVE('',#6148,#6072,#6198,.T.);+#6198 = SURFACE_CURVE('',#6199,(#6203,#6210),.PCURVE_S1.);+#6199 = LINE('',#6200,#6201);+#6200 = CARTESIAN_POINT('',(3.03,1.225,0.));+#6201 = VECTOR('',#6202,1.);+#6202 = DIRECTION('',(-1.,0.,0.));+#6203 = PCURVE('',#6087,#6204);+#6204 = DEFINITIONAL_REPRESENTATION('',(#6205),#6209);+#6205 = LINE('',#6206,#6207);+#6206 = CARTESIAN_POINT('',(0.,0.225));+#6207 = VECTOR('',#6208,1.);+#6208 = DIRECTION('',(1.,0.));+#6209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6210 = PCURVE('',#5876,#6211);+#6211 = DEFINITIONAL_REPRESENTATION('',(#6212),#6216);+#6212 = LINE('',#6213,#6214);+#6213 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#6214 = VECTOR('',#6215,1.);+#6215 = DIRECTION('',(0.,-1.));+#6216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6217 = ADVANCED_FACE('',(#6218),#6163,.T.);+#6218 = FACE_BOUND('',#6219,.T.);+#6219 = EDGE_LOOP('',(#6220,#6250,#6271,#6272));+#6220 = ORIENTED_EDGE('',*,*,#6221,.F.);+#6221 = EDGE_CURVE('',#6222,#6224,#6226,.T.);+#6222 = VERTEX_POINT('',#6223);+#6223 = CARTESIAN_POINT('',(3.03,0.775,0.15));+#6224 = VERTEX_POINT('',#6225);+#6225 = CARTESIAN_POINT('',(3.03,1.225,0.15));+#6226 = SURFACE_CURVE('',#6227,(#6231,#6238),.PCURVE_S1.);+#6227 = LINE('',#6228,#6229);+#6228 = CARTESIAN_POINT('',(3.03,0.775,0.15));+#6229 = VECTOR('',#6230,1.);+#6230 = DIRECTION('',(0.,1.,0.));+#6231 = PCURVE('',#6163,#6232);+#6232 = DEFINITIONAL_REPRESENTATION('',(#6233),#6237);+#6233 = LINE('',#6234,#6235);+#6234 = CARTESIAN_POINT('',(0.,-0.225));+#6235 = VECTOR('',#6236,1.);+#6236 = DIRECTION('',(0.,1.));+#6237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6238 = PCURVE('',#6239,#6244);+#6239 = PLANE('',#6240);+#6240 = AXIS2_PLACEMENT_3D('',#6241,#6242,#6243);+#6241 = CARTESIAN_POINT('',(2.4125,1.,0.15));+#6242 = DIRECTION('',(0.,0.,1.));+#6243 = DIRECTION('',(1.,0.,0.));+#6244 = DEFINITIONAL_REPRESENTATION('',(#6245),#6249);+#6245 = LINE('',#6246,#6247);+#6246 = CARTESIAN_POINT('',(0.6175,-0.225));+#6247 = VECTOR('',#6248,1.);+#6248 = DIRECTION('',(0.,1.));+#6249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6250 = ORIENTED_EDGE('',*,*,#6251,.T.);+#6251 = EDGE_CURVE('',#6222,#6146,#6252,.T.);+#6252 = SURFACE_CURVE('',#6253,(#6257,#6264),.PCURVE_S1.);+#6253 = LINE('',#6254,#6255);+#6254 = CARTESIAN_POINT('',(3.03,0.775,0.15));+#6255 = VECTOR('',#6256,1.);+#6256 = DIRECTION('',(0.,0.,-1.));+#6257 = PCURVE('',#6163,#6258);+#6258 = DEFINITIONAL_REPRESENTATION('',(#6259),#6263);+#6259 = LINE('',#6260,#6261);+#6260 = CARTESIAN_POINT('',(0.,-0.225));+#6261 = VECTOR('',#6262,1.);+#6262 = DIRECTION('',(1.,0.));+#6263 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6264 = PCURVE('',#5820,#6265);+#6265 = DEFINITIONAL_REPRESENTATION('',(#6266),#6270);+#6266 = LINE('',#6267,#6268);+#6267 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#6268 = VECTOR('',#6269,1.);+#6269 = DIRECTION('',(-1.,0.));+#6270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6271 = ORIENTED_EDGE('',*,*,#6145,.T.);+#6272 = ORIENTED_EDGE('',*,*,#6273,.F.);+#6273 = EDGE_CURVE('',#6224,#6148,#6274,.T.);+#6274 = SURFACE_CURVE('',#6275,(#6279,#6286),.PCURVE_S1.);+#6275 = LINE('',#6276,#6277);+#6276 = CARTESIAN_POINT('',(3.03,1.225,0.15));+#6277 = VECTOR('',#6278,1.);+#6278 = DIRECTION('',(0.,0.,-1.));+#6279 = PCURVE('',#6163,#6280);+#6280 = DEFINITIONAL_REPRESENTATION('',(#6281),#6285);+#6281 = LINE('',#6282,#6283);+#6282 = CARTESIAN_POINT('',(0.,0.225));+#6283 = VECTOR('',#6284,1.);+#6284 = DIRECTION('',(1.,0.));+#6285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6286 = PCURVE('',#5876,#6287);+#6287 = DEFINITIONAL_REPRESENTATION('',(#6288),#6292);+#6288 = LINE('',#6289,#6290);+#6289 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#6290 = VECTOR('',#6291,1.);+#6291 = DIRECTION('',(-1.,0.));+#6292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6293 = ADVANCED_FACE('',(#6294),#6239,.T.);+#6294 = FACE_BOUND('',#6295,.T.);+#6295 = EDGE_LOOP('',(#6296,#6321,#6342,#6343));+#6296 = ORIENTED_EDGE('',*,*,#6297,.F.);+#6297 = EDGE_CURVE('',#6298,#6300,#6302,.T.);+#6298 = VERTEX_POINT('',#6299);+#6299 = CARTESIAN_POINT('',(2.4125,0.775,0.15));+#6300 = VERTEX_POINT('',#6301);+#6301 = CARTESIAN_POINT('',(2.4125,1.225,0.15));+#6302 = SURFACE_CURVE('',#6303,(#6307,#6314),.PCURVE_S1.);+#6303 = LINE('',#6304,#6305);+#6304 = CARTESIAN_POINT('',(2.4125,0.775,0.15));+#6305 = VECTOR('',#6306,1.);+#6306 = DIRECTION('',(0.,1.,0.));+#6307 = PCURVE('',#6239,#6308);+#6308 = DEFINITIONAL_REPRESENTATION('',(#6309),#6313);+#6309 = LINE('',#6310,#6311);+#6310 = CARTESIAN_POINT('',(0.,-0.225));+#6311 = VECTOR('',#6312,1.);+#6312 = DIRECTION('',(0.,1.));+#6313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6314 = PCURVE('',#5848,#6315);+#6315 = DEFINITIONAL_REPRESENTATION('',(#6316),#6320);+#6316 = LINE('',#6317,#6318);+#6317 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#6318 = VECTOR('',#6319,1.);+#6319 = DIRECTION('',(0.,1.));+#6320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6321 = ORIENTED_EDGE('',*,*,#6322,.T.);+#6322 = EDGE_CURVE('',#6298,#6222,#6323,.T.);+#6323 = SURFACE_CURVE('',#6324,(#6328,#6335),.PCURVE_S1.);+#6324 = LINE('',#6325,#6326);+#6325 = CARTESIAN_POINT('',(2.4125,0.775,0.15));+#6326 = VECTOR('',#6327,1.);+#6327 = DIRECTION('',(1.,0.,0.));+#6328 = PCURVE('',#6239,#6329);+#6329 = DEFINITIONAL_REPRESENTATION('',(#6330),#6334);+#6330 = LINE('',#6331,#6332);+#6331 = CARTESIAN_POINT('',(0.,-0.225));+#6332 = VECTOR('',#6333,1.);+#6333 = DIRECTION('',(1.,0.));+#6334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6335 = PCURVE('',#5820,#6336);+#6336 = DEFINITIONAL_REPRESENTATION('',(#6337),#6341);+#6337 = LINE('',#6338,#6339);+#6338 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#6339 = VECTOR('',#6340,1.);+#6340 = DIRECTION('',(0.,1.));+#6341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6342 = ORIENTED_EDGE('',*,*,#6221,.T.);+#6343 = ORIENTED_EDGE('',*,*,#6344,.F.);+#6344 = EDGE_CURVE('',#6300,#6224,#6345,.T.);+#6345 = SURFACE_CURVE('',#6346,(#6350,#6357),.PCURVE_S1.);+#6346 = LINE('',#6347,#6348);+#6347 = CARTESIAN_POINT('',(2.4125,1.225,0.15));+#6348 = VECTOR('',#6349,1.);+#6349 = DIRECTION('',(1.,0.,0.));+#6350 = PCURVE('',#6239,#6351);+#6351 = DEFINITIONAL_REPRESENTATION('',(#6352),#6356);+#6352 = LINE('',#6353,#6354);+#6353 = CARTESIAN_POINT('',(0.,0.225));+#6354 = VECTOR('',#6355,1.);+#6355 = DIRECTION('',(1.,0.));+#6356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6357 = PCURVE('',#5876,#6358);+#6358 = DEFINITIONAL_REPRESENTATION('',(#6359),#6363);+#6359 = LINE('',#6360,#6361);+#6360 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#6361 = VECTOR('',#6362,1.);+#6362 = DIRECTION('',(0.,1.));+#6363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6364 = ADVANCED_FACE('',(#6365),#5876,.T.);+#6365 = FACE_BOUND('',#6366,.T.);+#6366 = EDGE_LOOP('',(#6367,#6368,#6389,#6390,#6391,#6392,#6393,#6394));+#6367 = ORIENTED_EDGE('',*,*,#5860,.T.);+#6368 = ORIENTED_EDGE('',*,*,#6369,.T.);+#6369 = EDGE_CURVE('',#5833,#6300,#6370,.T.);+#6370 = SURFACE_CURVE('',#6371,(#6375,#6382),.PCURVE_S1.);+#6371 = LINE('',#6372,#6373);+#6372 = CARTESIAN_POINT('',(2.1,1.225,0.87));+#6373 = VECTOR('',#6374,1.);+#6374 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#6375 = PCURVE('',#5876,#6376);+#6376 = DEFINITIONAL_REPRESENTATION('',(#6377),#6381);+#6377 = LINE('',#6378,#6379);+#6378 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#6379 = VECTOR('',#6380,1.);+#6380 = DIRECTION('',(-0.917323062896,0.398143690493));+#6381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6382 = PCURVE('',#5848,#6383);+#6383 = DEFINITIONAL_REPRESENTATION('',(#6384),#6388);+#6384 = LINE('',#6385,#6386);+#6385 = CARTESIAN_POINT('',(0.,0.225));+#6386 = VECTOR('',#6387,1.);+#6387 = DIRECTION('',(1.,0.));+#6388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6389 = ORIENTED_EDGE('',*,*,#6344,.T.);+#6390 = ORIENTED_EDGE('',*,*,#6273,.T.);+#6391 = ORIENTED_EDGE('',*,*,#6197,.T.);+#6392 = ORIENTED_EDGE('',*,*,#6121,.T.);+#6393 = ORIENTED_EDGE('',*,*,#6017,.T.);+#6394 = ORIENTED_EDGE('',*,*,#5941,.T.);+#6395 = ADVANCED_FACE('',(#6396),#5848,.T.);+#6396 = FACE_BOUND('',#6397,.T.);+#6397 = EDGE_LOOP('',(#6398,#6399,#6420,#6421));+#6398 = ORIENTED_EDGE('',*,*,#5832,.F.);+#6399 = ORIENTED_EDGE('',*,*,#6400,.T.);+#6400 = EDGE_CURVE('',#5800,#6298,#6401,.T.);+#6401 = SURFACE_CURVE('',#6402,(#6406,#6413),.PCURVE_S1.);+#6402 = LINE('',#6403,#6404);+#6403 = CARTESIAN_POINT('',(2.1,0.775,0.87));+#6404 = VECTOR('',#6405,1.);+#6405 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#6406 = PCURVE('',#5848,#6407);+#6407 = DEFINITIONAL_REPRESENTATION('',(#6408),#6412);+#6408 = LINE('',#6409,#6410);+#6409 = CARTESIAN_POINT('',(0.,-0.225));+#6410 = VECTOR('',#6411,1.);+#6411 = DIRECTION('',(1.,0.));+#6412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6413 = PCURVE('',#5820,#6414);+#6414 = DEFINITIONAL_REPRESENTATION('',(#6415),#6419);+#6415 = LINE('',#6416,#6417);+#6416 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#6417 = VECTOR('',#6418,1.);+#6418 = DIRECTION('',(-0.917323062896,0.398143690493));+#6419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6420 = ORIENTED_EDGE('',*,*,#6297,.T.);+#6421 = ORIENTED_EDGE('',*,*,#6369,.F.);+#6422 = ADVANCED_FACE('',(#6423),#5820,.F.);+#6423 = FACE_BOUND('',#6424,.F.);+#6424 = EDGE_LOOP('',(#6425,#6426,#6427,#6428,#6429,#6430,#6431,#6432));+#6425 = ORIENTED_EDGE('',*,*,#5797,.T.);+#6426 = ORIENTED_EDGE('',*,*,#6400,.T.);+#6427 = ORIENTED_EDGE('',*,*,#6322,.T.);+#6428 = ORIENTED_EDGE('',*,*,#6251,.T.);+#6429 = ORIENTED_EDGE('',*,*,#6175,.T.);+#6430 = ORIENTED_EDGE('',*,*,#6099,.T.);+#6431 = ORIENTED_EDGE('',*,*,#5993,.T.);+#6432 = ORIENTED_EDGE('',*,*,#5917,.T.);+#6433 = MANIFOLD_SOLID_BREP('',#6434);+#6434 = CLOSED_SHELL('',(#6435,#6555,#6631,#6707,#6783,#6859,#6935,#7006+ ,#7037,#7064));+#6435 = ADVANCED_FACE('',(#6436),#6450,.T.);+#6436 = FACE_BOUND('',#6437,.T.);+#6437 = EDGE_LOOP('',(#6438,#6473,#6501,#6529));+#6438 = ORIENTED_EDGE('',*,*,#6439,.T.);+#6439 = EDGE_CURVE('',#6440,#6442,#6444,.T.);+#6440 = VERTEX_POINT('',#6441);+#6441 = CARTESIAN_POINT('',(1.9,1.775,0.87));+#6442 = VERTEX_POINT('',#6443);+#6443 = CARTESIAN_POINT('',(2.1,1.775,0.87));+#6444 = SURFACE_CURVE('',#6445,(#6449,#6461),.PCURVE_S1.);+#6445 = LINE('',#6446,#6447);+#6446 = CARTESIAN_POINT('',(1.9,1.775,0.87));+#6447 = VECTOR('',#6448,1.);+#6448 = DIRECTION('',(1.,0.,0.));+#6449 = PCURVE('',#6450,#6455);+#6450 = PLANE('',#6451);+#6451 = AXIS2_PLACEMENT_3D('',#6452,#6453,#6454);+#6452 = CARTESIAN_POINT('',(1.9,2.,0.87));+#6453 = DIRECTION('',(0.,0.,1.));+#6454 = DIRECTION('',(1.,0.,0.));+#6455 = DEFINITIONAL_REPRESENTATION('',(#6456),#6460);+#6456 = LINE('',#6457,#6458);+#6457 = CARTESIAN_POINT('',(0.,-0.225));+#6458 = VECTOR('',#6459,1.);+#6459 = DIRECTION('',(1.,0.));+#6460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6461 = PCURVE('',#6462,#6467);+#6462 = PLANE('',#6463);+#6463 = AXIS2_PLACEMENT_3D('',#6464,#6465,#6466);+#6464 = CARTESIAN_POINT('',(2.38850950278,1.775,0.318416529686));+#6465 = DIRECTION('',(0.,1.,0.));+#6466 = DIRECTION('',(0.,0.,1.));+#6467 = DEFINITIONAL_REPRESENTATION('',(#6468),#6472);+#6468 = LINE('',#6469,#6470);+#6469 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#6470 = VECTOR('',#6471,1.);+#6471 = DIRECTION('',(0.,1.));+#6472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6473 = ORIENTED_EDGE('',*,*,#6474,.T.);+#6474 = EDGE_CURVE('',#6442,#6475,#6477,.T.);+#6475 = VERTEX_POINT('',#6476);+#6476 = CARTESIAN_POINT('',(2.1,2.225,0.87));+#6477 = SURFACE_CURVE('',#6478,(#6482,#6489),.PCURVE_S1.);+#6478 = LINE('',#6479,#6480);+#6479 = CARTESIAN_POINT('',(2.1,1.775,0.87));+#6480 = VECTOR('',#6481,1.);+#6481 = DIRECTION('',(0.,1.,0.));+#6482 = PCURVE('',#6450,#6483);+#6483 = DEFINITIONAL_REPRESENTATION('',(#6484),#6488);+#6484 = LINE('',#6485,#6486);+#6485 = CARTESIAN_POINT('',(0.2,-0.225));+#6486 = VECTOR('',#6487,1.);+#6487 = DIRECTION('',(0.,1.));+#6488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6489 = PCURVE('',#6490,#6495);+#6490 = PLANE('',#6491);+#6491 = AXIS2_PLACEMENT_3D('',#6492,#6493,#6494);+#6492 = CARTESIAN_POINT('',(2.1,2.,0.87));+#6493 = DIRECTION('',(0.917323062896,0.,0.398143690493));+#6494 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#6495 = DEFINITIONAL_REPRESENTATION('',(#6496),#6500);+#6496 = LINE('',#6497,#6498);+#6497 = CARTESIAN_POINT('',(0.,-0.225));+#6498 = VECTOR('',#6499,1.);+#6499 = DIRECTION('',(0.,1.));+#6500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6501 = ORIENTED_EDGE('',*,*,#6502,.F.);+#6502 = EDGE_CURVE('',#6503,#6475,#6505,.T.);+#6503 = VERTEX_POINT('',#6504);+#6504 = CARTESIAN_POINT('',(1.9,2.225,0.87));+#6505 = SURFACE_CURVE('',#6506,(#6510,#6517),.PCURVE_S1.);+#6506 = LINE('',#6507,#6508);+#6507 = CARTESIAN_POINT('',(1.9,2.225,0.87));+#6508 = VECTOR('',#6509,1.);+#6509 = DIRECTION('',(1.,0.,0.));+#6510 = PCURVE('',#6450,#6511);+#6511 = DEFINITIONAL_REPRESENTATION('',(#6512),#6516);+#6512 = LINE('',#6513,#6514);+#6513 = CARTESIAN_POINT('',(0.,0.225));+#6514 = VECTOR('',#6515,1.);+#6515 = DIRECTION('',(1.,0.));+#6516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6517 = PCURVE('',#6518,#6523);+#6518 = PLANE('',#6519);+#6519 = AXIS2_PLACEMENT_3D('',#6520,#6521,#6522);+#6520 = CARTESIAN_POINT('',(2.38850950278,2.225,0.318416529686));+#6521 = DIRECTION('',(0.,1.,0.));+#6522 = DIRECTION('',(0.,0.,1.));+#6523 = DEFINITIONAL_REPRESENTATION('',(#6524),#6528);+#6524 = LINE('',#6525,#6526);+#6525 = CARTESIAN_POINT('',(0.551583470314,-0.48850950278));+#6526 = VECTOR('',#6527,1.);+#6527 = DIRECTION('',(0.,1.));+#6528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6529 = ORIENTED_EDGE('',*,*,#6530,.T.);+#6530 = EDGE_CURVE('',#6503,#6440,#6531,.T.);+#6531 = SURFACE_CURVE('',#6532,(#6536,#6543),.PCURVE_S1.);+#6532 = LINE('',#6533,#6534);+#6533 = CARTESIAN_POINT('',(1.9,2.225,0.87));+#6534 = VECTOR('',#6535,1.);+#6535 = DIRECTION('',(0.,-1.,0.));+#6536 = PCURVE('',#6450,#6537);+#6537 = DEFINITIONAL_REPRESENTATION('',(#6538),#6542);+#6538 = LINE('',#6539,#6540);+#6539 = CARTESIAN_POINT('',(0.,0.225));+#6540 = VECTOR('',#6541,1.);+#6541 = DIRECTION('',(0.,-1.));+#6542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6543 = PCURVE('',#6544,#6549);+#6544 = PLANE('',#6545);+#6545 = AXIS2_PLACEMENT_3D('',#6546,#6547,#6548);+#6546 = CARTESIAN_POINT('',(1.9,2.,0.72));+#6547 = DIRECTION('',(-1.,0.,0.));+#6548 = DIRECTION('',(0.,0.,1.));+#6549 = DEFINITIONAL_REPRESENTATION('',(#6550),#6554);+#6550 = LINE('',#6551,#6552);+#6551 = CARTESIAN_POINT('',(0.15,0.225));+#6552 = VECTOR('',#6553,1.);+#6553 = DIRECTION('',(0.,-1.));+#6554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6555 = ADVANCED_FACE('',(#6556),#6544,.T.);+#6556 = FACE_BOUND('',#6557,.T.);+#6557 = EDGE_LOOP('',(#6558,#6581,#6582,#6605));+#6558 = ORIENTED_EDGE('',*,*,#6559,.T.);+#6559 = EDGE_CURVE('',#6560,#6440,#6562,.T.);+#6560 = VERTEX_POINT('',#6561);+#6561 = CARTESIAN_POINT('',(1.9,1.775,0.72));+#6562 = SURFACE_CURVE('',#6563,(#6567,#6574),.PCURVE_S1.);+#6563 = LINE('',#6564,#6565);+#6564 = CARTESIAN_POINT('',(1.9,1.775,0.72));+#6565 = VECTOR('',#6566,1.);+#6566 = DIRECTION('',(0.,0.,1.));+#6567 = PCURVE('',#6544,#6568);+#6568 = DEFINITIONAL_REPRESENTATION('',(#6569),#6573);+#6569 = LINE('',#6570,#6571);+#6570 = CARTESIAN_POINT('',(0.,-0.225));+#6571 = VECTOR('',#6572,1.);+#6572 = DIRECTION('',(1.,0.));+#6573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6574 = PCURVE('',#6462,#6575);+#6575 = DEFINITIONAL_REPRESENTATION('',(#6576),#6580);+#6576 = LINE('',#6577,#6578);+#6577 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#6578 = VECTOR('',#6579,1.);+#6579 = DIRECTION('',(1.,0.));+#6580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6581 = ORIENTED_EDGE('',*,*,#6530,.F.);+#6582 = ORIENTED_EDGE('',*,*,#6583,.F.);+#6583 = EDGE_CURVE('',#6584,#6503,#6586,.T.);+#6584 = VERTEX_POINT('',#6585);+#6585 = CARTESIAN_POINT('',(1.9,2.225,0.72));+#6586 = SURFACE_CURVE('',#6587,(#6591,#6598),.PCURVE_S1.);+#6587 = LINE('',#6588,#6589);+#6588 = CARTESIAN_POINT('',(1.9,2.225,0.72));+#6589 = VECTOR('',#6590,1.);+#6590 = DIRECTION('',(0.,0.,1.));+#6591 = PCURVE('',#6544,#6592);+#6592 = DEFINITIONAL_REPRESENTATION('',(#6593),#6597);+#6593 = LINE('',#6594,#6595);+#6594 = CARTESIAN_POINT('',(0.,0.225));+#6595 = VECTOR('',#6596,1.);+#6596 = DIRECTION('',(1.,0.));+#6597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6598 = PCURVE('',#6518,#6599);+#6599 = DEFINITIONAL_REPRESENTATION('',(#6600),#6604);+#6600 = LINE('',#6601,#6602);+#6601 = CARTESIAN_POINT('',(0.401583470314,-0.48850950278));+#6602 = VECTOR('',#6603,1.);+#6603 = DIRECTION('',(1.,0.));+#6604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6605 = ORIENTED_EDGE('',*,*,#6606,.T.);+#6606 = EDGE_CURVE('',#6584,#6560,#6607,.T.);+#6607 = SURFACE_CURVE('',#6608,(#6612,#6619),.PCURVE_S1.);+#6608 = LINE('',#6609,#6610);+#6609 = CARTESIAN_POINT('',(1.9,2.225,0.72));+#6610 = VECTOR('',#6611,1.);+#6611 = DIRECTION('',(0.,-1.,0.));+#6612 = PCURVE('',#6544,#6613);+#6613 = DEFINITIONAL_REPRESENTATION('',(#6614),#6618);+#6614 = LINE('',#6615,#6616);+#6615 = CARTESIAN_POINT('',(0.,0.225));+#6616 = VECTOR('',#6617,1.);+#6617 = DIRECTION('',(0.,-1.));+#6618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6619 = PCURVE('',#6620,#6625);+#6620 = PLANE('',#6621);+#6621 = AXIS2_PLACEMENT_3D('',#6622,#6623,#6624);+#6622 = CARTESIAN_POINT('',(1.95,2.,0.72));+#6623 = DIRECTION('',(-0.,-0.,-1.));+#6624 = DIRECTION('',(-1.,0.,0.));+#6625 = DEFINITIONAL_REPRESENTATION('',(#6626),#6630);+#6626 = LINE('',#6627,#6628);+#6627 = CARTESIAN_POINT('',(5.E-02,0.225));+#6628 = VECTOR('',#6629,1.);+#6629 = DIRECTION('',(0.,-1.));+#6630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6631 = ADVANCED_FACE('',(#6632),#6620,.T.);+#6632 = FACE_BOUND('',#6633,.T.);+#6633 = EDGE_LOOP('',(#6634,#6657,#6658,#6681));+#6634 = ORIENTED_EDGE('',*,*,#6635,.T.);+#6635 = EDGE_CURVE('',#6636,#6560,#6638,.T.);+#6636 = VERTEX_POINT('',#6637);+#6637 = CARTESIAN_POINT('',(1.95,1.775,0.72));+#6638 = SURFACE_CURVE('',#6639,(#6643,#6650),.PCURVE_S1.);+#6639 = LINE('',#6640,#6641);+#6640 = CARTESIAN_POINT('',(1.95,1.775,0.72));+#6641 = VECTOR('',#6642,1.);+#6642 = DIRECTION('',(-1.,0.,0.));+#6643 = PCURVE('',#6620,#6644);+#6644 = DEFINITIONAL_REPRESENTATION('',(#6645),#6649);+#6645 = LINE('',#6646,#6647);+#6646 = CARTESIAN_POINT('',(0.,-0.225));+#6647 = VECTOR('',#6648,1.);+#6648 = DIRECTION('',(1.,0.));+#6649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6650 = PCURVE('',#6462,#6651);+#6651 = DEFINITIONAL_REPRESENTATION('',(#6652),#6656);+#6652 = LINE('',#6653,#6654);+#6653 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#6654 = VECTOR('',#6655,1.);+#6655 = DIRECTION('',(0.,-1.));+#6656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6657 = ORIENTED_EDGE('',*,*,#6606,.F.);+#6658 = ORIENTED_EDGE('',*,*,#6659,.F.);+#6659 = EDGE_CURVE('',#6660,#6584,#6662,.T.);+#6660 = VERTEX_POINT('',#6661);+#6661 = CARTESIAN_POINT('',(1.95,2.225,0.72));+#6662 = SURFACE_CURVE('',#6663,(#6667,#6674),.PCURVE_S1.);+#6663 = LINE('',#6664,#6665);+#6664 = CARTESIAN_POINT('',(1.95,2.225,0.72));+#6665 = VECTOR('',#6666,1.);+#6666 = DIRECTION('',(-1.,0.,0.));+#6667 = PCURVE('',#6620,#6668);+#6668 = DEFINITIONAL_REPRESENTATION('',(#6669),#6673);+#6669 = LINE('',#6670,#6671);+#6670 = CARTESIAN_POINT('',(0.,0.225));+#6671 = VECTOR('',#6672,1.);+#6672 = DIRECTION('',(1.,0.));+#6673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6674 = PCURVE('',#6518,#6675);+#6675 = DEFINITIONAL_REPRESENTATION('',(#6676),#6680);+#6676 = LINE('',#6677,#6678);+#6677 = CARTESIAN_POINT('',(0.401583470314,-0.43850950278));+#6678 = VECTOR('',#6679,1.);+#6679 = DIRECTION('',(0.,-1.));+#6680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6681 = ORIENTED_EDGE('',*,*,#6682,.T.);+#6682 = EDGE_CURVE('',#6660,#6636,#6683,.T.);+#6683 = SURFACE_CURVE('',#6684,(#6688,#6695),.PCURVE_S1.);+#6684 = LINE('',#6685,#6686);+#6685 = CARTESIAN_POINT('',(1.95,2.225,0.72));+#6686 = VECTOR('',#6687,1.);+#6687 = DIRECTION('',(0.,-1.,0.));+#6688 = PCURVE('',#6620,#6689);+#6689 = DEFINITIONAL_REPRESENTATION('',(#6690),#6694);+#6690 = LINE('',#6691,#6692);+#6691 = CARTESIAN_POINT('',(0.,0.225));+#6692 = VECTOR('',#6693,1.);+#6693 = DIRECTION('',(0.,-1.));+#6694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6695 = PCURVE('',#6696,#6701);+#6696 = PLANE('',#6697);+#6697 = AXIS2_PLACEMENT_3D('',#6698,#6699,#6700);+#6698 = CARTESIAN_POINT('',(2.2625,2.,0.));+#6699 = DIRECTION('',(-0.917323062896,-0.,-0.398143690493));+#6700 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#6701 = DEFINITIONAL_REPRESENTATION('',(#6702),#6706);+#6702 = LINE('',#6703,#6704);+#6703 = CARTESIAN_POINT('',(0.784892508564,0.225));+#6704 = VECTOR('',#6705,1.);+#6705 = DIRECTION('',(0.,-1.));+#6706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6707 = ADVANCED_FACE('',(#6708),#6696,.T.);+#6708 = FACE_BOUND('',#6709,.T.);+#6709 = EDGE_LOOP('',(#6710,#6740,#6761,#6762));+#6710 = ORIENTED_EDGE('',*,*,#6711,.F.);+#6711 = EDGE_CURVE('',#6712,#6714,#6716,.T.);+#6712 = VERTEX_POINT('',#6713);+#6713 = CARTESIAN_POINT('',(2.2625,1.775,0.));+#6714 = VERTEX_POINT('',#6715);+#6715 = CARTESIAN_POINT('',(2.2625,2.225,0.));+#6716 = SURFACE_CURVE('',#6717,(#6721,#6728),.PCURVE_S1.);+#6717 = LINE('',#6718,#6719);+#6718 = CARTESIAN_POINT('',(2.2625,1.775,0.));+#6719 = VECTOR('',#6720,1.);+#6720 = DIRECTION('',(0.,1.,0.));+#6721 = PCURVE('',#6696,#6722);+#6722 = DEFINITIONAL_REPRESENTATION('',(#6723),#6727);+#6723 = LINE('',#6724,#6725);+#6724 = CARTESIAN_POINT('',(0.,-0.225));+#6725 = VECTOR('',#6726,1.);+#6726 = DIRECTION('',(0.,1.));+#6727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6728 = PCURVE('',#6729,#6734);+#6729 = PLANE('',#6730);+#6730 = AXIS2_PLACEMENT_3D('',#6731,#6732,#6733);+#6731 = CARTESIAN_POINT('',(3.03,2.,0.));+#6732 = DIRECTION('',(-0.,-0.,-1.));+#6733 = DIRECTION('',(-1.,0.,0.));+#6734 = DEFINITIONAL_REPRESENTATION('',(#6735),#6739);+#6735 = LINE('',#6736,#6737);+#6736 = CARTESIAN_POINT('',(0.7675,-0.225));+#6737 = VECTOR('',#6738,1.);+#6738 = DIRECTION('',(0.,1.));+#6739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6740 = ORIENTED_EDGE('',*,*,#6741,.T.);+#6741 = EDGE_CURVE('',#6712,#6636,#6742,.T.);+#6742 = SURFACE_CURVE('',#6743,(#6747,#6754),.PCURVE_S1.);+#6743 = LINE('',#6744,#6745);+#6744 = CARTESIAN_POINT('',(2.2625,1.775,0.));+#6745 = VECTOR('',#6746,1.);+#6746 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#6747 = PCURVE('',#6696,#6748);+#6748 = DEFINITIONAL_REPRESENTATION('',(#6749),#6753);+#6749 = LINE('',#6750,#6751);+#6750 = CARTESIAN_POINT('',(0.,-0.225));+#6751 = VECTOR('',#6752,1.);+#6752 = DIRECTION('',(1.,0.));+#6753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6754 = PCURVE('',#6462,#6755);+#6755 = DEFINITIONAL_REPRESENTATION('',(#6756),#6760);+#6756 = LINE('',#6757,#6758);+#6757 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#6758 = VECTOR('',#6759,1.);+#6759 = DIRECTION('',(0.917323062896,-0.398143690493));+#6760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6761 = ORIENTED_EDGE('',*,*,#6682,.F.);+#6762 = ORIENTED_EDGE('',*,*,#6763,.F.);+#6763 = EDGE_CURVE('',#6714,#6660,#6764,.T.);+#6764 = SURFACE_CURVE('',#6765,(#6769,#6776),.PCURVE_S1.);+#6765 = LINE('',#6766,#6767);+#6766 = CARTESIAN_POINT('',(2.2625,2.225,0.));+#6767 = VECTOR('',#6768,1.);+#6768 = DIRECTION('',(-0.398143690493,0.,0.917323062896));+#6769 = PCURVE('',#6696,#6770);+#6770 = DEFINITIONAL_REPRESENTATION('',(#6771),#6775);+#6771 = LINE('',#6772,#6773);+#6772 = CARTESIAN_POINT('',(0.,0.225));+#6773 = VECTOR('',#6774,1.);+#6774 = DIRECTION('',(1.,0.));+#6775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6776 = PCURVE('',#6518,#6777);+#6777 = DEFINITIONAL_REPRESENTATION('',(#6778),#6782);+#6778 = LINE('',#6779,#6780);+#6779 = CARTESIAN_POINT('',(-0.318416529686,-0.12600950278));+#6780 = VECTOR('',#6781,1.);+#6781 = DIRECTION('',(0.917323062896,-0.398143690493));+#6782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6783 = ADVANCED_FACE('',(#6784),#6729,.T.);+#6784 = FACE_BOUND('',#6785,.T.);+#6785 = EDGE_LOOP('',(#6786,#6816,#6837,#6838));+#6786 = ORIENTED_EDGE('',*,*,#6787,.F.);+#6787 = EDGE_CURVE('',#6788,#6790,#6792,.T.);+#6788 = VERTEX_POINT('',#6789);+#6789 = CARTESIAN_POINT('',(3.03,1.775,0.));+#6790 = VERTEX_POINT('',#6791);+#6791 = CARTESIAN_POINT('',(3.03,2.225,0.));+#6792 = SURFACE_CURVE('',#6793,(#6797,#6804),.PCURVE_S1.);+#6793 = LINE('',#6794,#6795);+#6794 = CARTESIAN_POINT('',(3.03,1.775,0.));+#6795 = VECTOR('',#6796,1.);+#6796 = DIRECTION('',(0.,1.,0.));+#6797 = PCURVE('',#6729,#6798);+#6798 = DEFINITIONAL_REPRESENTATION('',(#6799),#6803);+#6799 = LINE('',#6800,#6801);+#6800 = CARTESIAN_POINT('',(0.,-0.225));+#6801 = VECTOR('',#6802,1.);+#6802 = DIRECTION('',(0.,1.));+#6803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6804 = PCURVE('',#6805,#6810);+#6805 = PLANE('',#6806);+#6806 = AXIS2_PLACEMENT_3D('',#6807,#6808,#6809);+#6807 = CARTESIAN_POINT('',(3.03,2.,0.15));+#6808 = DIRECTION('',(1.,0.,0.));+#6809 = DIRECTION('',(0.,0.,-1.));+#6810 = DEFINITIONAL_REPRESENTATION('',(#6811),#6815);+#6811 = LINE('',#6812,#6813);+#6812 = CARTESIAN_POINT('',(0.15,-0.225));+#6813 = VECTOR('',#6814,1.);+#6814 = DIRECTION('',(0.,1.));+#6815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6816 = ORIENTED_EDGE('',*,*,#6817,.T.);+#6817 = EDGE_CURVE('',#6788,#6712,#6818,.T.);+#6818 = SURFACE_CURVE('',#6819,(#6823,#6830),.PCURVE_S1.);+#6819 = LINE('',#6820,#6821);+#6820 = CARTESIAN_POINT('',(3.03,1.775,0.));+#6821 = VECTOR('',#6822,1.);+#6822 = DIRECTION('',(-1.,0.,0.));+#6823 = PCURVE('',#6729,#6824);+#6824 = DEFINITIONAL_REPRESENTATION('',(#6825),#6829);+#6825 = LINE('',#6826,#6827);+#6826 = CARTESIAN_POINT('',(0.,-0.225));+#6827 = VECTOR('',#6828,1.);+#6828 = DIRECTION('',(1.,0.));+#6829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6830 = PCURVE('',#6462,#6831);+#6831 = DEFINITIONAL_REPRESENTATION('',(#6832),#6836);+#6832 = LINE('',#6833,#6834);+#6833 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#6834 = VECTOR('',#6835,1.);+#6835 = DIRECTION('',(0.,-1.));+#6836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6837 = ORIENTED_EDGE('',*,*,#6711,.T.);+#6838 = ORIENTED_EDGE('',*,*,#6839,.F.);+#6839 = EDGE_CURVE('',#6790,#6714,#6840,.T.);+#6840 = SURFACE_CURVE('',#6841,(#6845,#6852),.PCURVE_S1.);+#6841 = LINE('',#6842,#6843);+#6842 = CARTESIAN_POINT('',(3.03,2.225,0.));+#6843 = VECTOR('',#6844,1.);+#6844 = DIRECTION('',(-1.,0.,0.));+#6845 = PCURVE('',#6729,#6846);+#6846 = DEFINITIONAL_REPRESENTATION('',(#6847),#6851);+#6847 = LINE('',#6848,#6849);+#6848 = CARTESIAN_POINT('',(0.,0.225));+#6849 = VECTOR('',#6850,1.);+#6850 = DIRECTION('',(1.,0.));+#6851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6852 = PCURVE('',#6518,#6853);+#6853 = DEFINITIONAL_REPRESENTATION('',(#6854),#6858);+#6854 = LINE('',#6855,#6856);+#6855 = CARTESIAN_POINT('',(-0.318416529686,0.64149049722));+#6856 = VECTOR('',#6857,1.);+#6857 = DIRECTION('',(0.,-1.));+#6858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6859 = ADVANCED_FACE('',(#6860),#6805,.T.);+#6860 = FACE_BOUND('',#6861,.T.);+#6861 = EDGE_LOOP('',(#6862,#6892,#6913,#6914));+#6862 = ORIENTED_EDGE('',*,*,#6863,.F.);+#6863 = EDGE_CURVE('',#6864,#6866,#6868,.T.);+#6864 = VERTEX_POINT('',#6865);+#6865 = CARTESIAN_POINT('',(3.03,1.775,0.15));+#6866 = VERTEX_POINT('',#6867);+#6867 = CARTESIAN_POINT('',(3.03,2.225,0.15));+#6868 = SURFACE_CURVE('',#6869,(#6873,#6880),.PCURVE_S1.);+#6869 = LINE('',#6870,#6871);+#6870 = CARTESIAN_POINT('',(3.03,1.775,0.15));+#6871 = VECTOR('',#6872,1.);+#6872 = DIRECTION('',(0.,1.,0.));+#6873 = PCURVE('',#6805,#6874);+#6874 = DEFINITIONAL_REPRESENTATION('',(#6875),#6879);+#6875 = LINE('',#6876,#6877);+#6876 = CARTESIAN_POINT('',(0.,-0.225));+#6877 = VECTOR('',#6878,1.);+#6878 = DIRECTION('',(0.,1.));+#6879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6880 = PCURVE('',#6881,#6886);+#6881 = PLANE('',#6882);+#6882 = AXIS2_PLACEMENT_3D('',#6883,#6884,#6885);+#6883 = CARTESIAN_POINT('',(2.4125,2.,0.15));+#6884 = DIRECTION('',(0.,0.,1.));+#6885 = DIRECTION('',(1.,0.,0.));+#6886 = DEFINITIONAL_REPRESENTATION('',(#6887),#6891);+#6887 = LINE('',#6888,#6889);+#6888 = CARTESIAN_POINT('',(0.6175,-0.225));+#6889 = VECTOR('',#6890,1.);+#6890 = DIRECTION('',(0.,1.));+#6891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6892 = ORIENTED_EDGE('',*,*,#6893,.T.);+#6893 = EDGE_CURVE('',#6864,#6788,#6894,.T.);+#6894 = SURFACE_CURVE('',#6895,(#6899,#6906),.PCURVE_S1.);+#6895 = LINE('',#6896,#6897);+#6896 = CARTESIAN_POINT('',(3.03,1.775,0.15));+#6897 = VECTOR('',#6898,1.);+#6898 = DIRECTION('',(0.,0.,-1.));+#6899 = PCURVE('',#6805,#6900);+#6900 = DEFINITIONAL_REPRESENTATION('',(#6901),#6905);+#6901 = LINE('',#6902,#6903);+#6902 = CARTESIAN_POINT('',(0.,-0.225));+#6903 = VECTOR('',#6904,1.);+#6904 = DIRECTION('',(1.,0.));+#6905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6906 = PCURVE('',#6462,#6907);+#6907 = DEFINITIONAL_REPRESENTATION('',(#6908),#6912);+#6908 = LINE('',#6909,#6910);+#6909 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#6910 = VECTOR('',#6911,1.);+#6911 = DIRECTION('',(-1.,0.));+#6912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6913 = ORIENTED_EDGE('',*,*,#6787,.T.);+#6914 = ORIENTED_EDGE('',*,*,#6915,.F.);+#6915 = EDGE_CURVE('',#6866,#6790,#6916,.T.);+#6916 = SURFACE_CURVE('',#6917,(#6921,#6928),.PCURVE_S1.);+#6917 = LINE('',#6918,#6919);+#6918 = CARTESIAN_POINT('',(3.03,2.225,0.15));+#6919 = VECTOR('',#6920,1.);+#6920 = DIRECTION('',(0.,0.,-1.));+#6921 = PCURVE('',#6805,#6922);+#6922 = DEFINITIONAL_REPRESENTATION('',(#6923),#6927);+#6923 = LINE('',#6924,#6925);+#6924 = CARTESIAN_POINT('',(0.,0.225));+#6925 = VECTOR('',#6926,1.);+#6926 = DIRECTION('',(1.,0.));+#6927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6928 = PCURVE('',#6518,#6929);+#6929 = DEFINITIONAL_REPRESENTATION('',(#6930),#6934);+#6930 = LINE('',#6931,#6932);+#6931 = CARTESIAN_POINT('',(-0.168416529686,0.64149049722));+#6932 = VECTOR('',#6933,1.);+#6933 = DIRECTION('',(-1.,0.));+#6934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6935 = ADVANCED_FACE('',(#6936),#6881,.T.);+#6936 = FACE_BOUND('',#6937,.T.);+#6937 = EDGE_LOOP('',(#6938,#6963,#6984,#6985));+#6938 = ORIENTED_EDGE('',*,*,#6939,.F.);+#6939 = EDGE_CURVE('',#6940,#6942,#6944,.T.);+#6940 = VERTEX_POINT('',#6941);+#6941 = CARTESIAN_POINT('',(2.4125,1.775,0.15));+#6942 = VERTEX_POINT('',#6943);+#6943 = CARTESIAN_POINT('',(2.4125,2.225,0.15));+#6944 = SURFACE_CURVE('',#6945,(#6949,#6956),.PCURVE_S1.);+#6945 = LINE('',#6946,#6947);+#6946 = CARTESIAN_POINT('',(2.4125,1.775,0.15));+#6947 = VECTOR('',#6948,1.);+#6948 = DIRECTION('',(0.,1.,0.));+#6949 = PCURVE('',#6881,#6950);+#6950 = DEFINITIONAL_REPRESENTATION('',(#6951),#6955);+#6951 = LINE('',#6952,#6953);+#6952 = CARTESIAN_POINT('',(0.,-0.225));+#6953 = VECTOR('',#6954,1.);+#6954 = DIRECTION('',(0.,1.));+#6955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6956 = PCURVE('',#6490,#6957);+#6957 = DEFINITIONAL_REPRESENTATION('',(#6958),#6962);+#6958 = LINE('',#6959,#6960);+#6959 = CARTESIAN_POINT('',(0.784892508564,-0.225));+#6960 = VECTOR('',#6961,1.);+#6961 = DIRECTION('',(0.,1.));+#6962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6963 = ORIENTED_EDGE('',*,*,#6964,.T.);+#6964 = EDGE_CURVE('',#6940,#6864,#6965,.T.);+#6965 = SURFACE_CURVE('',#6966,(#6970,#6977),.PCURVE_S1.);+#6966 = LINE('',#6967,#6968);+#6967 = CARTESIAN_POINT('',(2.4125,1.775,0.15));+#6968 = VECTOR('',#6969,1.);+#6969 = DIRECTION('',(1.,0.,0.));+#6970 = PCURVE('',#6881,#6971);+#6971 = DEFINITIONAL_REPRESENTATION('',(#6972),#6976);+#6972 = LINE('',#6973,#6974);+#6973 = CARTESIAN_POINT('',(0.,-0.225));+#6974 = VECTOR('',#6975,1.);+#6975 = DIRECTION('',(1.,0.));+#6976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6977 = PCURVE('',#6462,#6978);+#6978 = DEFINITIONAL_REPRESENTATION('',(#6979),#6983);+#6979 = LINE('',#6980,#6981);+#6980 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#6981 = VECTOR('',#6982,1.);+#6982 = DIRECTION('',(0.,1.));+#6983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6984 = ORIENTED_EDGE('',*,*,#6863,.T.);+#6985 = ORIENTED_EDGE('',*,*,#6986,.F.);+#6986 = EDGE_CURVE('',#6942,#6866,#6987,.T.);+#6987 = SURFACE_CURVE('',#6988,(#6992,#6999),.PCURVE_S1.);+#6988 = LINE('',#6989,#6990);+#6989 = CARTESIAN_POINT('',(2.4125,2.225,0.15));+#6990 = VECTOR('',#6991,1.);+#6991 = DIRECTION('',(1.,0.,0.));+#6992 = PCURVE('',#6881,#6993);+#6993 = DEFINITIONAL_REPRESENTATION('',(#6994),#6998);+#6994 = LINE('',#6995,#6996);+#6995 = CARTESIAN_POINT('',(0.,0.225));+#6996 = VECTOR('',#6997,1.);+#6997 = DIRECTION('',(1.,0.));+#6998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#6999 = PCURVE('',#6518,#7000);+#7000 = DEFINITIONAL_REPRESENTATION('',(#7001),#7005);+#7001 = LINE('',#7002,#7003);+#7002 = CARTESIAN_POINT('',(-0.168416529686,2.399049722E-02));+#7003 = VECTOR('',#7004,1.);+#7004 = DIRECTION('',(0.,1.));+#7005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7006 = ADVANCED_FACE('',(#7007),#6518,.T.);+#7007 = FACE_BOUND('',#7008,.T.);+#7008 = EDGE_LOOP('',(#7009,#7010,#7031,#7032,#7033,#7034,#7035,#7036));+#7009 = ORIENTED_EDGE('',*,*,#6502,.T.);+#7010 = ORIENTED_EDGE('',*,*,#7011,.T.);+#7011 = EDGE_CURVE('',#6475,#6942,#7012,.T.);+#7012 = SURFACE_CURVE('',#7013,(#7017,#7024),.PCURVE_S1.);+#7013 = LINE('',#7014,#7015);+#7014 = CARTESIAN_POINT('',(2.1,2.225,0.87));+#7015 = VECTOR('',#7016,1.);+#7016 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#7017 = PCURVE('',#6518,#7018);+#7018 = DEFINITIONAL_REPRESENTATION('',(#7019),#7023);+#7019 = LINE('',#7020,#7021);+#7020 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#7021 = VECTOR('',#7022,1.);+#7022 = DIRECTION('',(-0.917323062896,0.398143690493));+#7023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7024 = PCURVE('',#6490,#7025);+#7025 = DEFINITIONAL_REPRESENTATION('',(#7026),#7030);+#7026 = LINE('',#7027,#7028);+#7027 = CARTESIAN_POINT('',(0.,0.225));+#7028 = VECTOR('',#7029,1.);+#7029 = DIRECTION('',(1.,0.));+#7030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7031 = ORIENTED_EDGE('',*,*,#6986,.T.);+#7032 = ORIENTED_EDGE('',*,*,#6915,.T.);+#7033 = ORIENTED_EDGE('',*,*,#6839,.T.);+#7034 = ORIENTED_EDGE('',*,*,#6763,.T.);+#7035 = ORIENTED_EDGE('',*,*,#6659,.T.);+#7036 = ORIENTED_EDGE('',*,*,#6583,.T.);+#7037 = ADVANCED_FACE('',(#7038),#6490,.T.);+#7038 = FACE_BOUND('',#7039,.T.);+#7039 = EDGE_LOOP('',(#7040,#7041,#7062,#7063));+#7040 = ORIENTED_EDGE('',*,*,#6474,.F.);+#7041 = ORIENTED_EDGE('',*,*,#7042,.T.);+#7042 = EDGE_CURVE('',#6442,#6940,#7043,.T.);+#7043 = SURFACE_CURVE('',#7044,(#7048,#7055),.PCURVE_S1.);+#7044 = LINE('',#7045,#7046);+#7045 = CARTESIAN_POINT('',(2.1,1.775,0.87));+#7046 = VECTOR('',#7047,1.);+#7047 = DIRECTION('',(0.398143690493,0.,-0.917323062896));+#7048 = PCURVE('',#6490,#7049);+#7049 = DEFINITIONAL_REPRESENTATION('',(#7050),#7054);+#7050 = LINE('',#7051,#7052);+#7051 = CARTESIAN_POINT('',(0.,-0.225));+#7052 = VECTOR('',#7053,1.);+#7053 = DIRECTION('',(1.,0.));+#7054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7055 = PCURVE('',#6462,#7056);+#7056 = DEFINITIONAL_REPRESENTATION('',(#7057),#7061);+#7057 = LINE('',#7058,#7059);+#7058 = CARTESIAN_POINT('',(0.551583470314,-0.28850950278));+#7059 = VECTOR('',#7060,1.);+#7060 = DIRECTION('',(-0.917323062896,0.398143690493));+#7061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7062 = ORIENTED_EDGE('',*,*,#6939,.T.);+#7063 = ORIENTED_EDGE('',*,*,#7011,.F.);+#7064 = ADVANCED_FACE('',(#7065),#6462,.F.);+#7065 = FACE_BOUND('',#7066,.F.);+#7066 = EDGE_LOOP('',(#7067,#7068,#7069,#7070,#7071,#7072,#7073,#7074));+#7067 = ORIENTED_EDGE('',*,*,#6439,.T.);+#7068 = ORIENTED_EDGE('',*,*,#7042,.T.);+#7069 = ORIENTED_EDGE('',*,*,#6964,.T.);+#7070 = ORIENTED_EDGE('',*,*,#6893,.T.);+#7071 = ORIENTED_EDGE('',*,*,#6817,.T.);+#7072 = ORIENTED_EDGE('',*,*,#6741,.T.);+#7073 = ORIENTED_EDGE('',*,*,#6635,.T.);+#7074 = ORIENTED_EDGE('',*,*,#6559,.T.);+#7075 = MANIFOLD_SOLID_BREP('',#7076);+#7076 = CLOSED_SHELL('',(#7077,#7165,#7169));+#7077 = ADVANCED_FACE('',(#7078),#7091,.T.);+#7078 = FACE_BOUND('',#7079,.T.);+#7079 = EDGE_LOOP('',(#7080,#7114,#7137,#7164));+#7080 = ORIENTED_EDGE('',*,*,#7081,.T.);+#7081 = EDGE_CURVE('',#7082,#7082,#7084,.T.);+#7082 = VERTEX_POINT('',#7083);+#7083 = CARTESIAN_POINT('',(-1.17,1.943,1.7));+#7084 = SURFACE_CURVE('',#7085,(#7090,#7102),.PCURVE_S1.);+#7085 = CIRCLE('',#7086,0.273);+#7086 = AXIS2_PLACEMENT_3D('',#7087,#7088,#7089);+#7087 = CARTESIAN_POINT('',(-1.443,1.943,1.7));+#7088 = DIRECTION('',(0.,0.,1.));+#7089 = DIRECTION('',(1.,0.,0.));+#7090 = PCURVE('',#7091,#7096);+#7091 = CYLINDRICAL_SURFACE('',#7092,0.273);+#7092 = AXIS2_PLACEMENT_3D('',#7093,#7094,#7095);+#7093 = CARTESIAN_POINT('',(-1.443,1.943,1.7));+#7094 = DIRECTION('',(-0.,-0.,-1.));+#7095 = DIRECTION('',(1.,0.,0.));+#7096 = DEFINITIONAL_REPRESENTATION('',(#7097),#7101);+#7097 = LINE('',#7098,#7099);+#7098 = CARTESIAN_POINT('',(6.28318530718,0.));+#7099 = VECTOR('',#7100,1.);+#7100 = DIRECTION('',(-1.,0.));+#7101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7102 = PCURVE('',#7103,#7108);+#7103 = PLANE('',#7104);+#7104 = AXIS2_PLACEMENT_3D('',#7105,#7106,#7107);+#7105 = CARTESIAN_POINT('',(-1.443,1.943,1.7));+#7106 = DIRECTION('',(0.,0.,1.));+#7107 = DIRECTION('',(1.,0.,0.));+#7108 = DEFINITIONAL_REPRESENTATION('',(#7109),#7113);+#7109 = CIRCLE('',#7110,0.273);+#7110 = AXIS2_PLACEMENT_2D('',#7111,#7112);+#7111 = CARTESIAN_POINT('',(0.,0.));+#7112 = DIRECTION('',(1.,0.));+#7113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7114 = ORIENTED_EDGE('',*,*,#7115,.T.);+#7115 = EDGE_CURVE('',#7082,#7116,#7118,.T.);+#7116 = VERTEX_POINT('',#7117);+#7117 = CARTESIAN_POINT('',(-1.17,1.943,1.705));+#7118 = SEAM_CURVE('',#7119,(#7123,#7130),.PCURVE_S1.);+#7119 = LINE('',#7120,#7121);+#7120 = CARTESIAN_POINT('',(-1.17,1.943,1.7));+#7121 = VECTOR('',#7122,1.);+#7122 = DIRECTION('',(0.,0.,1.));+#7123 = PCURVE('',#7091,#7124);+#7124 = DEFINITIONAL_REPRESENTATION('',(#7125),#7129);+#7125 = LINE('',#7126,#7127);+#7126 = CARTESIAN_POINT('',(-4.138911435803E-13,0.));+#7127 = VECTOR('',#7128,1.);+#7128 = DIRECTION('',(-0.,-1.));+#7129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7130 = PCURVE('',#7091,#7131);+#7131 = DEFINITIONAL_REPRESENTATION('',(#7132),#7136);+#7132 = LINE('',#7133,#7134);+#7133 = CARTESIAN_POINT('',(6.28318530718,0.));+#7134 = VECTOR('',#7135,1.);+#7135 = DIRECTION('',(-0.,-1.));+#7136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7137 = ORIENTED_EDGE('',*,*,#7138,.F.);+#7138 = EDGE_CURVE('',#7116,#7116,#7139,.T.);+#7139 = SURFACE_CURVE('',#7140,(#7145,#7152),.PCURVE_S1.);+#7140 = CIRCLE('',#7141,0.273);+#7141 = AXIS2_PLACEMENT_3D('',#7142,#7143,#7144);+#7142 = CARTESIAN_POINT('',(-1.443,1.943,1.705));+#7143 = DIRECTION('',(0.,0.,1.));+#7144 = DIRECTION('',(1.,0.,0.));+#7145 = PCURVE('',#7091,#7146);+#7146 = DEFINITIONAL_REPRESENTATION('',(#7147),#7151);+#7147 = LINE('',#7148,#7149);+#7148 = CARTESIAN_POINT('',(6.28318530718,-5.E-03));+#7149 = VECTOR('',#7150,1.);+#7150 = DIRECTION('',(-1.,0.));+#7151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7152 = PCURVE('',#7153,#7158);+#7153 = PLANE('',#7154);+#7154 = AXIS2_PLACEMENT_3D('',#7155,#7156,#7157);+#7155 = CARTESIAN_POINT('',(-1.443,1.943,1.705));+#7156 = DIRECTION('',(0.,0.,1.));+#7157 = DIRECTION('',(1.,0.,0.));+#7158 = DEFINITIONAL_REPRESENTATION('',(#7159),#7163);+#7159 = CIRCLE('',#7160,0.273);+#7160 = AXIS2_PLACEMENT_2D('',#7161,#7162);+#7161 = CARTESIAN_POINT('',(0.,0.));+#7162 = DIRECTION('',(1.,0.));+#7163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''+ ) );+#7164 = ORIENTED_EDGE('',*,*,#7115,.F.);+#7165 = ADVANCED_FACE('',(#7166),#7103,.F.);+#7166 = FACE_BOUND('',#7167,.F.);+#7167 = EDGE_LOOP('',(#7168));+#7168 = ORIENTED_EDGE('',*,*,#7081,.T.);+#7169 = ADVANCED_FACE('',(#7170),#7153,.T.);+#7170 = FACE_BOUND('',#7171,.T.);+#7171 = EDGE_LOOP('',(#7172));+#7172 = ORIENTED_EDGE('',*,*,#7138,.T.);+#7173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#7177)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#7174,#7175,#7176)) REPRESENTATION_CONTEXT+('Context #1','3D Context with UNIT and UNCERTAINTY') );+#7174 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#7175 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#7176 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#7177 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#7174,+ 'distance_accuracy_value','confusion accuracy');+#7178 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#7179 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(+ #7180,#7188,#7195,#7202,#7209,#7216,#7223,#7230,#7237,#7244,#7251,+ #7258,#7265,#7273,#7280,#7287,#7294,#7301,#7308,#7315,#7322,#7329,+ #7336,#7343,#7350,#7357,#7364,#7371,#7378,#7385,#7392,#7399,#7406,+ #7413,#7420,#7427,#7434,#7441,#7448,#7455,#7462,#7469,#7476,#7483,+ #7490,#7497,#7504,#7511,#7518,#7525,#7532,#7539,#7546,#7553,#7560,+ #7567,#7574,#7581,#7588,#7595,#7602,#7609,#7616,#7623,#7630,#7637,+ #7644,#7651,#7658,#7665,#7672,#7679,#7686,#7693,#7700,#7707,#7714,+ #7721,#7728,#7735,#7742,#7749,#7756,#7763,#7770,#7777,#7784,#7791,+ #7798,#7805,#7812,#7819,#7826,#7833,#7840,#7847,#7854,#7861,#7868,+ #7875,#7882,#7889,#7896,#7903,#7910,#7917,#7924,#7931,#7938,#7945,+ #7952,#7959,#7966,#7974,#7981),#7173);+#7180 = STYLED_ITEM('color',(#7181),#17);+#7181 = PRESENTATION_STYLE_ASSIGNMENT((#7182));+#7182 = SURFACE_STYLE_USAGE(.BOTH.,#7183);+#7183 = SURFACE_SIDE_STYLE('',(#7184));+#7184 = SURFACE_STYLE_FILL_AREA(#7185);+#7185 = FILL_AREA_STYLE('',(#7186));+#7186 = FILL_AREA_STYLE_COLOUR('',#7187);+#7187 = COLOUR_RGB('',0.120000001395,0.120000001395,0.130000001093);+#7188 = STYLED_ITEM('color',(#7189),#137);+#7189 = PRESENTATION_STYLE_ASSIGNMENT((#7190));+#7190 = SURFACE_STYLE_USAGE(.BOTH.,#7191);+#7191 = SURFACE_SIDE_STYLE('',(#7192));+#7192 = SURFACE_STYLE_FILL_AREA(#7193);+#7193 = FILL_AREA_STYLE('',(#7194));+#7194 = FILL_AREA_STYLE_COLOUR('',#7187);+#7195 = STYLED_ITEM('color',(#7196),#218);+#7196 = PRESENTATION_STYLE_ASSIGNMENT((#7197));+#7197 = SURFACE_STYLE_USAGE(.BOTH.,#7198);+#7198 = SURFACE_SIDE_STYLE('',(#7199));+#7199 = SURFACE_STYLE_FILL_AREA(#7200);+#7200 = FILL_AREA_STYLE('',(#7201));+#7201 = FILL_AREA_STYLE_COLOUR('',#7187);+#7202 = STYLED_ITEM('color',(#7203),#299);+#7203 = PRESENTATION_STYLE_ASSIGNMENT((#7204));+#7204 = SURFACE_STYLE_USAGE(.BOTH.,#7205);+#7205 = SURFACE_SIDE_STYLE('',(#7206));+#7206 = SURFACE_STYLE_FILL_AREA(#7207);+#7207 = FILL_AREA_STYLE('',(#7208));+#7208 = FILL_AREA_STYLE_COLOUR('',#7187);+#7209 = STYLED_ITEM('color',(#7210),#348);+#7210 = PRESENTATION_STYLE_ASSIGNMENT((#7211));+#7211 = SURFACE_STYLE_USAGE(.BOTH.,#7212);+#7212 = SURFACE_SIDE_STYLE('',(#7213));+#7213 = SURFACE_STYLE_FILL_AREA(#7214);+#7214 = FILL_AREA_STYLE('',(#7215));+#7215 = FILL_AREA_STYLE_COLOUR('',#7187);+#7216 = STYLED_ITEM('color',(#7217),#397);+#7217 = PRESENTATION_STYLE_ASSIGNMENT((#7218));+#7218 = SURFACE_STYLE_USAGE(.BOTH.,#7219);+#7219 = SURFACE_SIDE_STYLE('',(#7220));+#7220 = SURFACE_STYLE_FILL_AREA(#7221);+#7221 = FILL_AREA_STYLE('',(#7222));+#7222 = FILL_AREA_STYLE_COLOUR('',#7187);+#7223 = STYLED_ITEM('color',(#7224),#429);+#7224 = PRESENTATION_STYLE_ASSIGNMENT((#7225));+#7225 = SURFACE_STYLE_USAGE(.BOTH.,#7226);+#7226 = SURFACE_SIDE_STYLE('',(#7227));+#7227 = SURFACE_STYLE_FILL_AREA(#7228);+#7228 = FILL_AREA_STYLE('',(#7229));+#7229 = FILL_AREA_STYLE_COLOUR('',#7187);+#7230 = STYLED_ITEM('color',(#7231),#478);+#7231 = PRESENTATION_STYLE_ASSIGNMENT((#7232));+#7232 = SURFACE_STYLE_USAGE(.BOTH.,#7233);+#7233 = SURFACE_SIDE_STYLE('',(#7234));+#7234 = SURFACE_STYLE_FILL_AREA(#7235);+#7235 = FILL_AREA_STYLE('',(#7236));+#7236 = FILL_AREA_STYLE_COLOUR('',#7187);+#7237 = STYLED_ITEM('color',(#7238),#562);+#7238 = PRESENTATION_STYLE_ASSIGNMENT((#7239));+#7239 = SURFACE_STYLE_USAGE(.BOTH.,#7240);+#7240 = SURFACE_SIDE_STYLE('',(#7241));+#7241 = SURFACE_STYLE_FILL_AREA(#7242);+#7242 = FILL_AREA_STYLE('',(#7243));+#7243 = FILL_AREA_STYLE_COLOUR('',#7187);+#7244 = STYLED_ITEM('color',(#7245),#589);+#7245 = PRESENTATION_STYLE_ASSIGNMENT((#7246));+#7246 = SURFACE_STYLE_USAGE(.BOTH.,#7247);+#7247 = SURFACE_SIDE_STYLE('',(#7248));+#7248 = SURFACE_STYLE_FILL_AREA(#7249);+#7249 = FILL_AREA_STYLE('',(#7250));+#7250 = FILL_AREA_STYLE_COLOUR('',#7187);+#7251 = STYLED_ITEM('color',(#7252),#596);+#7252 = PRESENTATION_STYLE_ASSIGNMENT((#7253));+#7253 = SURFACE_STYLE_USAGE(.BOTH.,#7254);+#7254 = SURFACE_SIDE_STYLE('',(#7255));+#7255 = SURFACE_STYLE_FILL_AREA(#7256);+#7256 = FILL_AREA_STYLE('',(#7257));+#7257 = FILL_AREA_STYLE_COLOUR('',#7187);+#7258 = STYLED_ITEM('color',(#7259),#651);+#7259 = PRESENTATION_STYLE_ASSIGNMENT((#7260));+#7260 = SURFACE_STYLE_USAGE(.BOTH.,#7261);+#7261 = SURFACE_SIDE_STYLE('',(#7262));+#7262 = SURFACE_STYLE_FILL_AREA(#7263);+#7263 = FILL_AREA_STYLE('',(#7264));+#7264 = FILL_AREA_STYLE_COLOUR('',#7187);+#7265 = STYLED_ITEM('color',(#7266),#657);+#7266 = PRESENTATION_STYLE_ASSIGNMENT((#7267));+#7267 = SURFACE_STYLE_USAGE(.BOTH.,#7268);+#7268 = SURFACE_SIDE_STYLE('',(#7269));+#7269 = SURFACE_STYLE_FILL_AREA(#7270);+#7270 = FILL_AREA_STYLE('',(#7271));+#7271 = FILL_AREA_STYLE_COLOUR('',#7272);+#7272 = COLOUR_RGB('',0.78000000177,0.78000000177,0.760000013601);+#7273 = STYLED_ITEM('color',(#7274),#777);+#7274 = PRESENTATION_STYLE_ASSIGNMENT((#7275));+#7275 = SURFACE_STYLE_USAGE(.BOTH.,#7276);+#7276 = SURFACE_SIDE_STYLE('',(#7277));+#7277 = SURFACE_STYLE_FILL_AREA(#7278);+#7278 = FILL_AREA_STYLE('',(#7279));+#7279 = FILL_AREA_STYLE_COLOUR('',#7272);+#7280 = STYLED_ITEM('color',(#7281),#965);+#7281 = PRESENTATION_STYLE_ASSIGNMENT((#7282));+#7282 = SURFACE_STYLE_USAGE(.BOTH.,#7283);+#7283 = SURFACE_SIDE_STYLE('',(#7284));+#7284 = SURFACE_STYLE_FILL_AREA(#7285);+#7285 = FILL_AREA_STYLE('',(#7286));+#7286 = FILL_AREA_STYLE_COLOUR('',#7272);+#7287 = STYLED_ITEM('color',(#7288),#1036);+#7288 = PRESENTATION_STYLE_ASSIGNMENT((#7289));+#7289 = SURFACE_STYLE_USAGE(.BOTH.,#7290);+#7290 = SURFACE_SIDE_STYLE('',(#7291));+#7291 = SURFACE_STYLE_FILL_AREA(#7292);+#7292 = FILL_AREA_STYLE('',(#7293));+#7293 = FILL_AREA_STYLE_COLOUR('',#7272);+#7294 = STYLED_ITEM('color',(#7295),#1085);+#7295 = PRESENTATION_STYLE_ASSIGNMENT((#7296));+#7296 = SURFACE_STYLE_USAGE(.BOTH.,#7297);+#7297 = SURFACE_SIDE_STYLE('',(#7298));+#7298 = SURFACE_STYLE_FILL_AREA(#7299);+#7299 = FILL_AREA_STYLE('',(#7300));+#7300 = FILL_AREA_STYLE_COLOUR('',#7272);+#7301 = STYLED_ITEM('color',(#7302),#1134);+#7302 = PRESENTATION_STYLE_ASSIGNMENT((#7303));+#7303 = SURFACE_STYLE_USAGE(.BOTH.,#7304);+#7304 = SURFACE_SIDE_STYLE('',(#7305));+#7305 = SURFACE_STYLE_FILL_AREA(#7306);+#7306 = FILL_AREA_STYLE('',(#7307));+#7307 = FILL_AREA_STYLE_COLOUR('',#7272);+#7308 = STYLED_ITEM('color',(#7309),#1183);+#7309 = PRESENTATION_STYLE_ASSIGNMENT((#7310));+#7310 = SURFACE_STYLE_USAGE(.BOTH.,#7311);+#7311 = SURFACE_SIDE_STYLE('',(#7312));+#7312 = SURFACE_STYLE_FILL_AREA(#7313);+#7313 = FILL_AREA_STYLE('',(#7314));+#7314 = FILL_AREA_STYLE_COLOUR('',#7272);+#7315 = STYLED_ITEM('color',(#7316),#1232);+#7316 = PRESENTATION_STYLE_ASSIGNMENT((#7317));+#7317 = SURFACE_STYLE_USAGE(.BOTH.,#7318);+#7318 = SURFACE_SIDE_STYLE('',(#7319));+#7319 = SURFACE_STYLE_FILL_AREA(#7320);+#7320 = FILL_AREA_STYLE('',(#7321));+#7321 = FILL_AREA_STYLE_COLOUR('',#7272);+#7322 = STYLED_ITEM('color',(#7323),#1259);+#7323 = PRESENTATION_STYLE_ASSIGNMENT((#7324));+#7324 = SURFACE_STYLE_USAGE(.BOTH.,#7325);+#7325 = SURFACE_SIDE_STYLE('',(#7326));+#7326 = SURFACE_STYLE_FILL_AREA(#7327);+#7327 = FILL_AREA_STYLE('',(#7328));+#7328 = FILL_AREA_STYLE_COLOUR('',#7272);+#7329 = STYLED_ITEM('color',(#7330),#1290);+#7330 = PRESENTATION_STYLE_ASSIGNMENT((#7331));+#7331 = SURFACE_STYLE_USAGE(.BOTH.,#7332);+#7332 = SURFACE_SIDE_STYLE('',(#7333));+#7333 = SURFACE_STYLE_FILL_AREA(#7334);+#7334 = FILL_AREA_STYLE('',(#7335));+#7335 = FILL_AREA_STYLE_COLOUR('',#7272);+#7336 = STYLED_ITEM('color',(#7337),#1299);+#7337 = PRESENTATION_STYLE_ASSIGNMENT((#7338));+#7338 = SURFACE_STYLE_USAGE(.BOTH.,#7339);+#7339 = SURFACE_SIDE_STYLE('',(#7340));+#7340 = SURFACE_STYLE_FILL_AREA(#7341);+#7341 = FILL_AREA_STYLE('',(#7342));+#7342 = FILL_AREA_STYLE_COLOUR('',#7272);+#7343 = STYLED_ITEM('color',(#7344),#1419);+#7344 = PRESENTATION_STYLE_ASSIGNMENT((#7345));+#7345 = SURFACE_STYLE_USAGE(.BOTH.,#7346);+#7346 = SURFACE_SIDE_STYLE('',(#7347));+#7347 = SURFACE_STYLE_FILL_AREA(#7348);+#7348 = FILL_AREA_STYLE('',(#7349));+#7349 = FILL_AREA_STYLE_COLOUR('',#7272);+#7350 = STYLED_ITEM('color',(#7351),#1607);+#7351 = PRESENTATION_STYLE_ASSIGNMENT((#7352));+#7352 = SURFACE_STYLE_USAGE(.BOTH.,#7353);+#7353 = SURFACE_SIDE_STYLE('',(#7354));+#7354 = SURFACE_STYLE_FILL_AREA(#7355);+#7355 = FILL_AREA_STYLE('',(#7356));+#7356 = FILL_AREA_STYLE_COLOUR('',#7272);+#7357 = STYLED_ITEM('color',(#7358),#1678);+#7358 = PRESENTATION_STYLE_ASSIGNMENT((#7359));+#7359 = SURFACE_STYLE_USAGE(.BOTH.,#7360);+#7360 = SURFACE_SIDE_STYLE('',(#7361));+#7361 = SURFACE_STYLE_FILL_AREA(#7362);+#7362 = FILL_AREA_STYLE('',(#7363));+#7363 = FILL_AREA_STYLE_COLOUR('',#7272);+#7364 = STYLED_ITEM('color',(#7365),#1727);+#7365 = PRESENTATION_STYLE_ASSIGNMENT((#7366));+#7366 = SURFACE_STYLE_USAGE(.BOTH.,#7367);+#7367 = SURFACE_SIDE_STYLE('',(#7368));+#7368 = SURFACE_STYLE_FILL_AREA(#7369);+#7369 = FILL_AREA_STYLE('',(#7370));+#7370 = FILL_AREA_STYLE_COLOUR('',#7272);+#7371 = STYLED_ITEM('color',(#7372),#1776);+#7372 = PRESENTATION_STYLE_ASSIGNMENT((#7373));+#7373 = SURFACE_STYLE_USAGE(.BOTH.,#7374);+#7374 = SURFACE_SIDE_STYLE('',(#7375));+#7375 = SURFACE_STYLE_FILL_AREA(#7376);+#7376 = FILL_AREA_STYLE('',(#7377));+#7377 = FILL_AREA_STYLE_COLOUR('',#7272);+#7378 = STYLED_ITEM('color',(#7379),#1825);+#7379 = PRESENTATION_STYLE_ASSIGNMENT((#7380));+#7380 = SURFACE_STYLE_USAGE(.BOTH.,#7381);+#7381 = SURFACE_SIDE_STYLE('',(#7382));+#7382 = SURFACE_STYLE_FILL_AREA(#7383);+#7383 = FILL_AREA_STYLE('',(#7384));+#7384 = FILL_AREA_STYLE_COLOUR('',#7272);+#7385 = STYLED_ITEM('color',(#7386),#1874);+#7386 = PRESENTATION_STYLE_ASSIGNMENT((#7387));+#7387 = SURFACE_STYLE_USAGE(.BOTH.,#7388);+#7388 = SURFACE_SIDE_STYLE('',(#7389));+#7389 = SURFACE_STYLE_FILL_AREA(#7390);+#7390 = FILL_AREA_STYLE('',(#7391));+#7391 = FILL_AREA_STYLE_COLOUR('',#7272);+#7392 = STYLED_ITEM('color',(#7393),#1901);+#7393 = PRESENTATION_STYLE_ASSIGNMENT((#7394));+#7394 = SURFACE_STYLE_USAGE(.BOTH.,#7395);+#7395 = SURFACE_SIDE_STYLE('',(#7396));+#7396 = SURFACE_STYLE_FILL_AREA(#7397);+#7397 = FILL_AREA_STYLE('',(#7398));+#7398 = FILL_AREA_STYLE_COLOUR('',#7272);+#7399 = STYLED_ITEM('color',(#7400),#1932);+#7400 = PRESENTATION_STYLE_ASSIGNMENT((#7401));+#7401 = SURFACE_STYLE_USAGE(.BOTH.,#7402);+#7402 = SURFACE_SIDE_STYLE('',(#7403));+#7403 = SURFACE_STYLE_FILL_AREA(#7404);+#7404 = FILL_AREA_STYLE('',(#7405));+#7405 = FILL_AREA_STYLE_COLOUR('',#7272);+#7406 = STYLED_ITEM('color',(#7407),#1941);+#7407 = PRESENTATION_STYLE_ASSIGNMENT((#7408));+#7408 = SURFACE_STYLE_USAGE(.BOTH.,#7409);+#7409 = SURFACE_SIDE_STYLE('',(#7410));+#7410 = SURFACE_STYLE_FILL_AREA(#7411);+#7411 = FILL_AREA_STYLE('',(#7412));+#7412 = FILL_AREA_STYLE_COLOUR('',#7272);+#7413 = STYLED_ITEM('color',(#7414),#2061);+#7414 = PRESENTATION_STYLE_ASSIGNMENT((#7415));+#7415 = SURFACE_STYLE_USAGE(.BOTH.,#7416);+#7416 = SURFACE_SIDE_STYLE('',(#7417));+#7417 = SURFACE_STYLE_FILL_AREA(#7418);+#7418 = FILL_AREA_STYLE('',(#7419));+#7419 = FILL_AREA_STYLE_COLOUR('',#7272);+#7420 = STYLED_ITEM('color',(#7421),#2249);+#7421 = PRESENTATION_STYLE_ASSIGNMENT((#7422));+#7422 = SURFACE_STYLE_USAGE(.BOTH.,#7423);+#7423 = SURFACE_SIDE_STYLE('',(#7424));+#7424 = SURFACE_STYLE_FILL_AREA(#7425);+#7425 = FILL_AREA_STYLE('',(#7426));+#7426 = FILL_AREA_STYLE_COLOUR('',#7272);+#7427 = STYLED_ITEM('color',(#7428),#2320);+#7428 = PRESENTATION_STYLE_ASSIGNMENT((#7429));+#7429 = SURFACE_STYLE_USAGE(.BOTH.,#7430);+#7430 = SURFACE_SIDE_STYLE('',(#7431));+#7431 = SURFACE_STYLE_FILL_AREA(#7432);+#7432 = FILL_AREA_STYLE('',(#7433));+#7433 = FILL_AREA_STYLE_COLOUR('',#7272);+#7434 = STYLED_ITEM('color',(#7435),#2369);+#7435 = PRESENTATION_STYLE_ASSIGNMENT((#7436));+#7436 = SURFACE_STYLE_USAGE(.BOTH.,#7437);+#7437 = SURFACE_SIDE_STYLE('',(#7438));+#7438 = SURFACE_STYLE_FILL_AREA(#7439);+#7439 = FILL_AREA_STYLE('',(#7440));+#7440 = FILL_AREA_STYLE_COLOUR('',#7272);+#7441 = STYLED_ITEM('color',(#7442),#2418);+#7442 = PRESENTATION_STYLE_ASSIGNMENT((#7443));+#7443 = SURFACE_STYLE_USAGE(.BOTH.,#7444);+#7444 = SURFACE_SIDE_STYLE('',(#7445));+#7445 = SURFACE_STYLE_FILL_AREA(#7446);+#7446 = FILL_AREA_STYLE('',(#7447));+#7447 = FILL_AREA_STYLE_COLOUR('',#7272);+#7448 = STYLED_ITEM('color',(#7449),#2467);+#7449 = PRESENTATION_STYLE_ASSIGNMENT((#7450));+#7450 = SURFACE_STYLE_USAGE(.BOTH.,#7451);+#7451 = SURFACE_SIDE_STYLE('',(#7452));+#7452 = SURFACE_STYLE_FILL_AREA(#7453);+#7453 = FILL_AREA_STYLE('',(#7454));+#7454 = FILL_AREA_STYLE_COLOUR('',#7272);+#7455 = STYLED_ITEM('color',(#7456),#2516);+#7456 = PRESENTATION_STYLE_ASSIGNMENT((#7457));+#7457 = SURFACE_STYLE_USAGE(.BOTH.,#7458);+#7458 = SURFACE_SIDE_STYLE('',(#7459));+#7459 = SURFACE_STYLE_FILL_AREA(#7460);+#7460 = FILL_AREA_STYLE('',(#7461));+#7461 = FILL_AREA_STYLE_COLOUR('',#7272);+#7462 = STYLED_ITEM('color',(#7463),#2543);+#7463 = PRESENTATION_STYLE_ASSIGNMENT((#7464));+#7464 = SURFACE_STYLE_USAGE(.BOTH.,#7465);+#7465 = SURFACE_SIDE_STYLE('',(#7466));+#7466 = SURFACE_STYLE_FILL_AREA(#7467);+#7467 = FILL_AREA_STYLE('',(#7468));+#7468 = FILL_AREA_STYLE_COLOUR('',#7272);+#7469 = STYLED_ITEM('color',(#7470),#2574);+#7470 = PRESENTATION_STYLE_ASSIGNMENT((#7471));+#7471 = SURFACE_STYLE_USAGE(.BOTH.,#7472);+#7472 = SURFACE_SIDE_STYLE('',(#7473));+#7473 = SURFACE_STYLE_FILL_AREA(#7474);+#7474 = FILL_AREA_STYLE('',(#7475));+#7475 = FILL_AREA_STYLE_COLOUR('',#7272);+#7476 = STYLED_ITEM('color',(#7477),#2583);+#7477 = PRESENTATION_STYLE_ASSIGNMENT((#7478));+#7478 = SURFACE_STYLE_USAGE(.BOTH.,#7479);+#7479 = SURFACE_SIDE_STYLE('',(#7480));+#7480 = SURFACE_STYLE_FILL_AREA(#7481);+#7481 = FILL_AREA_STYLE('',(#7482));+#7482 = FILL_AREA_STYLE_COLOUR('',#7272);+#7483 = STYLED_ITEM('color',(#7484),#2703);+#7484 = PRESENTATION_STYLE_ASSIGNMENT((#7485));+#7485 = SURFACE_STYLE_USAGE(.BOTH.,#7486);+#7486 = SURFACE_SIDE_STYLE('',(#7487));+#7487 = SURFACE_STYLE_FILL_AREA(#7488);+#7488 = FILL_AREA_STYLE('',(#7489));+#7489 = FILL_AREA_STYLE_COLOUR('',#7272);+#7490 = STYLED_ITEM('color',(#7491),#2891);+#7491 = PRESENTATION_STYLE_ASSIGNMENT((#7492));+#7492 = SURFACE_STYLE_USAGE(.BOTH.,#7493);+#7493 = SURFACE_SIDE_STYLE('',(#7494));+#7494 = SURFACE_STYLE_FILL_AREA(#7495);+#7495 = FILL_AREA_STYLE('',(#7496));+#7496 = FILL_AREA_STYLE_COLOUR('',#7272);+#7497 = STYLED_ITEM('color',(#7498),#2962);+#7498 = PRESENTATION_STYLE_ASSIGNMENT((#7499));+#7499 = SURFACE_STYLE_USAGE(.BOTH.,#7500);+#7500 = SURFACE_SIDE_STYLE('',(#7501));+#7501 = SURFACE_STYLE_FILL_AREA(#7502);+#7502 = FILL_AREA_STYLE('',(#7503));+#7503 = FILL_AREA_STYLE_COLOUR('',#7272);+#7504 = STYLED_ITEM('color',(#7505),#3011);+#7505 = PRESENTATION_STYLE_ASSIGNMENT((#7506));+#7506 = SURFACE_STYLE_USAGE(.BOTH.,#7507);+#7507 = SURFACE_SIDE_STYLE('',(#7508));+#7508 = SURFACE_STYLE_FILL_AREA(#7509);+#7509 = FILL_AREA_STYLE('',(#7510));+#7510 = FILL_AREA_STYLE_COLOUR('',#7272);+#7511 = STYLED_ITEM('color',(#7512),#3060);+#7512 = PRESENTATION_STYLE_ASSIGNMENT((#7513));+#7513 = SURFACE_STYLE_USAGE(.BOTH.,#7514);+#7514 = SURFACE_SIDE_STYLE('',(#7515));+#7515 = SURFACE_STYLE_FILL_AREA(#7516);+#7516 = FILL_AREA_STYLE('',(#7517));+#7517 = FILL_AREA_STYLE_COLOUR('',#7272);+#7518 = STYLED_ITEM('color',(#7519),#3109);+#7519 = PRESENTATION_STYLE_ASSIGNMENT((#7520));+#7520 = SURFACE_STYLE_USAGE(.BOTH.,#7521);+#7521 = SURFACE_SIDE_STYLE('',(#7522));+#7522 = SURFACE_STYLE_FILL_AREA(#7523);+#7523 = FILL_AREA_STYLE('',(#7524));+#7524 = FILL_AREA_STYLE_COLOUR('',#7272);+#7525 = STYLED_ITEM('color',(#7526),#3158);+#7526 = PRESENTATION_STYLE_ASSIGNMENT((#7527));+#7527 = SURFACE_STYLE_USAGE(.BOTH.,#7528);+#7528 = SURFACE_SIDE_STYLE('',(#7529));+#7529 = SURFACE_STYLE_FILL_AREA(#7530);+#7530 = FILL_AREA_STYLE('',(#7531));+#7531 = FILL_AREA_STYLE_COLOUR('',#7272);+#7532 = STYLED_ITEM('color',(#7533),#3185);+#7533 = PRESENTATION_STYLE_ASSIGNMENT((#7534));+#7534 = SURFACE_STYLE_USAGE(.BOTH.,#7535);+#7535 = SURFACE_SIDE_STYLE('',(#7536));+#7536 = SURFACE_STYLE_FILL_AREA(#7537);+#7537 = FILL_AREA_STYLE('',(#7538));+#7538 = FILL_AREA_STYLE_COLOUR('',#7272);+#7539 = STYLED_ITEM('color',(#7540),#3216);+#7540 = PRESENTATION_STYLE_ASSIGNMENT((#7541));+#7541 = SURFACE_STYLE_USAGE(.BOTH.,#7542);+#7542 = SURFACE_SIDE_STYLE('',(#7543));+#7543 = SURFACE_STYLE_FILL_AREA(#7544);+#7544 = FILL_AREA_STYLE('',(#7545));+#7545 = FILL_AREA_STYLE_COLOUR('',#7272);+#7546 = STYLED_ITEM('color',(#7547),#3225);+#7547 = PRESENTATION_STYLE_ASSIGNMENT((#7548));+#7548 = SURFACE_STYLE_USAGE(.BOTH.,#7549);+#7549 = SURFACE_SIDE_STYLE('',(#7550));+#7550 = SURFACE_STYLE_FILL_AREA(#7551);+#7551 = FILL_AREA_STYLE('',(#7552));+#7552 = FILL_AREA_STYLE_COLOUR('',#7272);+#7553 = STYLED_ITEM('color',(#7554),#3345);+#7554 = PRESENTATION_STYLE_ASSIGNMENT((#7555));+#7555 = SURFACE_STYLE_USAGE(.BOTH.,#7556);+#7556 = SURFACE_SIDE_STYLE('',(#7557));+#7557 = SURFACE_STYLE_FILL_AREA(#7558);+#7558 = FILL_AREA_STYLE('',(#7559));+#7559 = FILL_AREA_STYLE_COLOUR('',#7272);+#7560 = STYLED_ITEM('color',(#7561),#3533);+#7561 = PRESENTATION_STYLE_ASSIGNMENT((#7562));+#7562 = SURFACE_STYLE_USAGE(.BOTH.,#7563);+#7563 = SURFACE_SIDE_STYLE('',(#7564));+#7564 = SURFACE_STYLE_FILL_AREA(#7565);+#7565 = FILL_AREA_STYLE('',(#7566));+#7566 = FILL_AREA_STYLE_COLOUR('',#7272);+#7567 = STYLED_ITEM('color',(#7568),#3604);+#7568 = PRESENTATION_STYLE_ASSIGNMENT((#7569));+#7569 = SURFACE_STYLE_USAGE(.BOTH.,#7570);+#7570 = SURFACE_SIDE_STYLE('',(#7571));+#7571 = SURFACE_STYLE_FILL_AREA(#7572);+#7572 = FILL_AREA_STYLE('',(#7573));+#7573 = FILL_AREA_STYLE_COLOUR('',#7272);+#7574 = STYLED_ITEM('color',(#7575),#3653);+#7575 = PRESENTATION_STYLE_ASSIGNMENT((#7576));+#7576 = SURFACE_STYLE_USAGE(.BOTH.,#7577);+#7577 = SURFACE_SIDE_STYLE('',(#7578));+#7578 = SURFACE_STYLE_FILL_AREA(#7579);+#7579 = FILL_AREA_STYLE('',(#7580));+#7580 = FILL_AREA_STYLE_COLOUR('',#7272);+#7581 = STYLED_ITEM('color',(#7582),#3702);+#7582 = PRESENTATION_STYLE_ASSIGNMENT((#7583));+#7583 = SURFACE_STYLE_USAGE(.BOTH.,#7584);+#7584 = SURFACE_SIDE_STYLE('',(#7585));+#7585 = SURFACE_STYLE_FILL_AREA(#7586);+#7586 = FILL_AREA_STYLE('',(#7587));+#7587 = FILL_AREA_STYLE_COLOUR('',#7272);+#7588 = STYLED_ITEM('color',(#7589),#3751);+#7589 = PRESENTATION_STYLE_ASSIGNMENT((#7590));+#7590 = SURFACE_STYLE_USAGE(.BOTH.,#7591);+#7591 = SURFACE_SIDE_STYLE('',(#7592));+#7592 = SURFACE_STYLE_FILL_AREA(#7593);+#7593 = FILL_AREA_STYLE('',(#7594));+#7594 = FILL_AREA_STYLE_COLOUR('',#7272);+#7595 = STYLED_ITEM('color',(#7596),#3800);+#7596 = PRESENTATION_STYLE_ASSIGNMENT((#7597));+#7597 = SURFACE_STYLE_USAGE(.BOTH.,#7598);+#7598 = SURFACE_SIDE_STYLE('',(#7599));+#7599 = SURFACE_STYLE_FILL_AREA(#7600);+#7600 = FILL_AREA_STYLE('',(#7601));+#7601 = FILL_AREA_STYLE_COLOUR('',#7272);+#7602 = STYLED_ITEM('color',(#7603),#3827);+#7603 = PRESENTATION_STYLE_ASSIGNMENT((#7604));+#7604 = SURFACE_STYLE_USAGE(.BOTH.,#7605);+#7605 = SURFACE_SIDE_STYLE('',(#7606));+#7606 = SURFACE_STYLE_FILL_AREA(#7607);+#7607 = FILL_AREA_STYLE('',(#7608));+#7608 = FILL_AREA_STYLE_COLOUR('',#7272);+#7609 = STYLED_ITEM('color',(#7610),#3858);+#7610 = PRESENTATION_STYLE_ASSIGNMENT((#7611));+#7611 = SURFACE_STYLE_USAGE(.BOTH.,#7612);+#7612 = SURFACE_SIDE_STYLE('',(#7613));+#7613 = SURFACE_STYLE_FILL_AREA(#7614);+#7614 = FILL_AREA_STYLE('',(#7615));+#7615 = FILL_AREA_STYLE_COLOUR('',#7272);+#7616 = STYLED_ITEM('color',(#7617),#3867);+#7617 = PRESENTATION_STYLE_ASSIGNMENT((#7618));+#7618 = SURFACE_STYLE_USAGE(.BOTH.,#7619);+#7619 = SURFACE_SIDE_STYLE('',(#7620));+#7620 = SURFACE_STYLE_FILL_AREA(#7621);+#7621 = FILL_AREA_STYLE('',(#7622));+#7622 = FILL_AREA_STYLE_COLOUR('',#7272);+#7623 = STYLED_ITEM('color',(#7624),#3987);+#7624 = PRESENTATION_STYLE_ASSIGNMENT((#7625));+#7625 = SURFACE_STYLE_USAGE(.BOTH.,#7626);+#7626 = SURFACE_SIDE_STYLE('',(#7627));+#7627 = SURFACE_STYLE_FILL_AREA(#7628);+#7628 = FILL_AREA_STYLE('',(#7629));+#7629 = FILL_AREA_STYLE_COLOUR('',#7272);+#7630 = STYLED_ITEM('color',(#7631),#4063);+#7631 = PRESENTATION_STYLE_ASSIGNMENT((#7632));+#7632 = SURFACE_STYLE_USAGE(.BOTH.,#7633);+#7633 = SURFACE_SIDE_STYLE('',(#7634));+#7634 = SURFACE_STYLE_FILL_AREA(#7635);+#7635 = FILL_AREA_STYLE('',(#7636));+#7636 = FILL_AREA_STYLE_COLOUR('',#7272);+#7637 = STYLED_ITEM('color',(#7638),#4139);+#7638 = PRESENTATION_STYLE_ASSIGNMENT((#7639));+#7639 = SURFACE_STYLE_USAGE(.BOTH.,#7640);+#7640 = SURFACE_SIDE_STYLE('',(#7641));+#7641 = SURFACE_STYLE_FILL_AREA(#7642);+#7642 = FILL_AREA_STYLE('',(#7643));+#7643 = FILL_AREA_STYLE_COLOUR('',#7272);+#7644 = STYLED_ITEM('color',(#7645),#4215);+#7645 = PRESENTATION_STYLE_ASSIGNMENT((#7646));+#7646 = SURFACE_STYLE_USAGE(.BOTH.,#7647);+#7647 = SURFACE_SIDE_STYLE('',(#7648));+#7648 = SURFACE_STYLE_FILL_AREA(#7649);+#7649 = FILL_AREA_STYLE('',(#7650));+#7650 = FILL_AREA_STYLE_COLOUR('',#7272);+#7651 = STYLED_ITEM('color',(#7652),#4291);+#7652 = PRESENTATION_STYLE_ASSIGNMENT((#7653));+#7653 = SURFACE_STYLE_USAGE(.BOTH.,#7654);+#7654 = SURFACE_SIDE_STYLE('',(#7655));+#7655 = SURFACE_STYLE_FILL_AREA(#7656);+#7656 = FILL_AREA_STYLE('',(#7657));+#7657 = FILL_AREA_STYLE_COLOUR('',#7272);+#7658 = STYLED_ITEM('color',(#7659),#4367);+#7659 = PRESENTATION_STYLE_ASSIGNMENT((#7660));+#7660 = SURFACE_STYLE_USAGE(.BOTH.,#7661);+#7661 = SURFACE_SIDE_STYLE('',(#7662));+#7662 = SURFACE_STYLE_FILL_AREA(#7663);+#7663 = FILL_AREA_STYLE('',(#7664));+#7664 = FILL_AREA_STYLE_COLOUR('',#7272);+#7665 = STYLED_ITEM('color',(#7666),#4438);+#7666 = PRESENTATION_STYLE_ASSIGNMENT((#7667));+#7667 = SURFACE_STYLE_USAGE(.BOTH.,#7668);+#7668 = SURFACE_SIDE_STYLE('',(#7669));+#7669 = SURFACE_STYLE_FILL_AREA(#7670);+#7670 = FILL_AREA_STYLE('',(#7671));+#7671 = FILL_AREA_STYLE_COLOUR('',#7272);+#7672 = STYLED_ITEM('color',(#7673),#4469);+#7673 = PRESENTATION_STYLE_ASSIGNMENT((#7674));+#7674 = SURFACE_STYLE_USAGE(.BOTH.,#7675);+#7675 = SURFACE_SIDE_STYLE('',(#7676));+#7676 = SURFACE_STYLE_FILL_AREA(#7677);+#7677 = FILL_AREA_STYLE('',(#7678));+#7678 = FILL_AREA_STYLE_COLOUR('',#7272);+#7679 = STYLED_ITEM('color',(#7680),#4496);+#7680 = PRESENTATION_STYLE_ASSIGNMENT((#7681));+#7681 = SURFACE_STYLE_USAGE(.BOTH.,#7682);+#7682 = SURFACE_SIDE_STYLE('',(#7683));+#7683 = SURFACE_STYLE_FILL_AREA(#7684);+#7684 = FILL_AREA_STYLE('',(#7685));+#7685 = FILL_AREA_STYLE_COLOUR('',#7272);+#7686 = STYLED_ITEM('color',(#7687),#4509);+#7687 = PRESENTATION_STYLE_ASSIGNMENT((#7688));+#7688 = SURFACE_STYLE_USAGE(.BOTH.,#7689);+#7689 = SURFACE_SIDE_STYLE('',(#7690));+#7690 = SURFACE_STYLE_FILL_AREA(#7691);+#7691 = FILL_AREA_STYLE('',(#7692));+#7692 = FILL_AREA_STYLE_COLOUR('',#7272);+#7693 = STYLED_ITEM('color',(#7694),#4629);+#7694 = PRESENTATION_STYLE_ASSIGNMENT((#7695));+#7695 = SURFACE_STYLE_USAGE(.BOTH.,#7696);+#7696 = SURFACE_SIDE_STYLE('',(#7697));+#7697 = SURFACE_STYLE_FILL_AREA(#7698);+#7698 = FILL_AREA_STYLE('',(#7699));+#7699 = FILL_AREA_STYLE_COLOUR('',#7272);+#7700 = STYLED_ITEM('color',(#7701),#4705);+#7701 = PRESENTATION_STYLE_ASSIGNMENT((#7702));+#7702 = SURFACE_STYLE_USAGE(.BOTH.,#7703);+#7703 = SURFACE_SIDE_STYLE('',(#7704));+#7704 = SURFACE_STYLE_FILL_AREA(#7705);+#7705 = FILL_AREA_STYLE('',(#7706));+#7706 = FILL_AREA_STYLE_COLOUR('',#7272);+#7707 = STYLED_ITEM('color',(#7708),#4781);+#7708 = PRESENTATION_STYLE_ASSIGNMENT((#7709));+#7709 = SURFACE_STYLE_USAGE(.BOTH.,#7710);+#7710 = SURFACE_SIDE_STYLE('',(#7711));+#7711 = SURFACE_STYLE_FILL_AREA(#7712);+#7712 = FILL_AREA_STYLE('',(#7713));+#7713 = FILL_AREA_STYLE_COLOUR('',#7272);+#7714 = STYLED_ITEM('color',(#7715),#4857);+#7715 = PRESENTATION_STYLE_ASSIGNMENT((#7716));+#7716 = SURFACE_STYLE_USAGE(.BOTH.,#7717);+#7717 = SURFACE_SIDE_STYLE('',(#7718));+#7718 = SURFACE_STYLE_FILL_AREA(#7719);+#7719 = FILL_AREA_STYLE('',(#7720));+#7720 = FILL_AREA_STYLE_COLOUR('',#7272);+#7721 = STYLED_ITEM('color',(#7722),#4933);+#7722 = PRESENTATION_STYLE_ASSIGNMENT((#7723));+#7723 = SURFACE_STYLE_USAGE(.BOTH.,#7724);+#7724 = SURFACE_SIDE_STYLE('',(#7725));+#7725 = SURFACE_STYLE_FILL_AREA(#7726);+#7726 = FILL_AREA_STYLE('',(#7727));+#7727 = FILL_AREA_STYLE_COLOUR('',#7272);+#7728 = STYLED_ITEM('color',(#7729),#5009);+#7729 = PRESENTATION_STYLE_ASSIGNMENT((#7730));+#7730 = SURFACE_STYLE_USAGE(.BOTH.,#7731);+#7731 = SURFACE_SIDE_STYLE('',(#7732));+#7732 = SURFACE_STYLE_FILL_AREA(#7733);+#7733 = FILL_AREA_STYLE('',(#7734));+#7734 = FILL_AREA_STYLE_COLOUR('',#7272);+#7735 = STYLED_ITEM('color',(#7736),#5080);+#7736 = PRESENTATION_STYLE_ASSIGNMENT((#7737));+#7737 = SURFACE_STYLE_USAGE(.BOTH.,#7738);+#7738 = SURFACE_SIDE_STYLE('',(#7739));+#7739 = SURFACE_STYLE_FILL_AREA(#7740);+#7740 = FILL_AREA_STYLE('',(#7741));+#7741 = FILL_AREA_STYLE_COLOUR('',#7272);+#7742 = STYLED_ITEM('color',(#7743),#5111);+#7743 = PRESENTATION_STYLE_ASSIGNMENT((#7744));+#7744 = SURFACE_STYLE_USAGE(.BOTH.,#7745);+#7745 = SURFACE_SIDE_STYLE('',(#7746));+#7746 = SURFACE_STYLE_FILL_AREA(#7747);+#7747 = FILL_AREA_STYLE('',(#7748));+#7748 = FILL_AREA_STYLE_COLOUR('',#7272);+#7749 = STYLED_ITEM('color',(#7750),#5138);+#7750 = PRESENTATION_STYLE_ASSIGNMENT((#7751));+#7751 = SURFACE_STYLE_USAGE(.BOTH.,#7752);+#7752 = SURFACE_SIDE_STYLE('',(#7753));+#7753 = SURFACE_STYLE_FILL_AREA(#7754);+#7754 = FILL_AREA_STYLE('',(#7755));+#7755 = FILL_AREA_STYLE_COLOUR('',#7272);+#7756 = STYLED_ITEM('color',(#7757),#5151);+#7757 = PRESENTATION_STYLE_ASSIGNMENT((#7758));+#7758 = SURFACE_STYLE_USAGE(.BOTH.,#7759);+#7759 = SURFACE_SIDE_STYLE('',(#7760));+#7760 = SURFACE_STYLE_FILL_AREA(#7761);+#7761 = FILL_AREA_STYLE('',(#7762));+#7762 = FILL_AREA_STYLE_COLOUR('',#7272);+#7763 = STYLED_ITEM('color',(#7764),#5271);+#7764 = PRESENTATION_STYLE_ASSIGNMENT((#7765));+#7765 = SURFACE_STYLE_USAGE(.BOTH.,#7766);+#7766 = SURFACE_SIDE_STYLE('',(#7767));+#7767 = SURFACE_STYLE_FILL_AREA(#7768);+#7768 = FILL_AREA_STYLE('',(#7769));+#7769 = FILL_AREA_STYLE_COLOUR('',#7272);+#7770 = STYLED_ITEM('color',(#7771),#5347);+#7771 = PRESENTATION_STYLE_ASSIGNMENT((#7772));+#7772 = SURFACE_STYLE_USAGE(.BOTH.,#7773);+#7773 = SURFACE_SIDE_STYLE('',(#7774));+#7774 = SURFACE_STYLE_FILL_AREA(#7775);+#7775 = FILL_AREA_STYLE('',(#7776));+#7776 = FILL_AREA_STYLE_COLOUR('',#7272);+#7777 = STYLED_ITEM('color',(#7778),#5423);+#7778 = PRESENTATION_STYLE_ASSIGNMENT((#7779));+#7779 = SURFACE_STYLE_USAGE(.BOTH.,#7780);+#7780 = SURFACE_SIDE_STYLE('',(#7781));+#7781 = SURFACE_STYLE_FILL_AREA(#7782);+#7782 = FILL_AREA_STYLE('',(#7783));+#7783 = FILL_AREA_STYLE_COLOUR('',#7272);+#7784 = STYLED_ITEM('color',(#7785),#5499);+#7785 = PRESENTATION_STYLE_ASSIGNMENT((#7786));+#7786 = SURFACE_STYLE_USAGE(.BOTH.,#7787);+#7787 = SURFACE_SIDE_STYLE('',(#7788));+#7788 = SURFACE_STYLE_FILL_AREA(#7789);+#7789 = FILL_AREA_STYLE('',(#7790));+#7790 = FILL_AREA_STYLE_COLOUR('',#7272);+#7791 = STYLED_ITEM('color',(#7792),#5575);+#7792 = PRESENTATION_STYLE_ASSIGNMENT((#7793));+#7793 = SURFACE_STYLE_USAGE(.BOTH.,#7794);+#7794 = SURFACE_SIDE_STYLE('',(#7795));+#7795 = SURFACE_STYLE_FILL_AREA(#7796);+#7796 = FILL_AREA_STYLE('',(#7797));+#7797 = FILL_AREA_STYLE_COLOUR('',#7272);+#7798 = STYLED_ITEM('color',(#7799),#5651);+#7799 = PRESENTATION_STYLE_ASSIGNMENT((#7800));+#7800 = SURFACE_STYLE_USAGE(.BOTH.,#7801);+#7801 = SURFACE_SIDE_STYLE('',(#7802));+#7802 = SURFACE_STYLE_FILL_AREA(#7803);+#7803 = FILL_AREA_STYLE('',(#7804));+#7804 = FILL_AREA_STYLE_COLOUR('',#7272);+#7805 = STYLED_ITEM('color',(#7806),#5722);+#7806 = PRESENTATION_STYLE_ASSIGNMENT((#7807));+#7807 = SURFACE_STYLE_USAGE(.BOTH.,#7808);+#7808 = SURFACE_SIDE_STYLE('',(#7809));+#7809 = SURFACE_STYLE_FILL_AREA(#7810);+#7810 = FILL_AREA_STYLE('',(#7811));+#7811 = FILL_AREA_STYLE_COLOUR('',#7272);+#7812 = STYLED_ITEM('color',(#7813),#5753);+#7813 = PRESENTATION_STYLE_ASSIGNMENT((#7814));+#7814 = SURFACE_STYLE_USAGE(.BOTH.,#7815);+#7815 = SURFACE_SIDE_STYLE('',(#7816));+#7816 = SURFACE_STYLE_FILL_AREA(#7817);+#7817 = FILL_AREA_STYLE('',(#7818));+#7818 = FILL_AREA_STYLE_COLOUR('',#7272);+#7819 = STYLED_ITEM('color',(#7820),#5780);+#7820 = PRESENTATION_STYLE_ASSIGNMENT((#7821));+#7821 = SURFACE_STYLE_USAGE(.BOTH.,#7822);+#7822 = SURFACE_SIDE_STYLE('',(#7823));+#7823 = SURFACE_STYLE_FILL_AREA(#7824);+#7824 = FILL_AREA_STYLE('',(#7825));+#7825 = FILL_AREA_STYLE_COLOUR('',#7272);+#7826 = STYLED_ITEM('color',(#7827),#5793);+#7827 = PRESENTATION_STYLE_ASSIGNMENT((#7828));+#7828 = SURFACE_STYLE_USAGE(.BOTH.,#7829);+#7829 = SURFACE_SIDE_STYLE('',(#7830));+#7830 = SURFACE_STYLE_FILL_AREA(#7831);+#7831 = FILL_AREA_STYLE('',(#7832));+#7832 = FILL_AREA_STYLE_COLOUR('',#7272);+#7833 = STYLED_ITEM('color',(#7834),#5913);+#7834 = PRESENTATION_STYLE_ASSIGNMENT((#7835));+#7835 = SURFACE_STYLE_USAGE(.BOTH.,#7836);+#7836 = SURFACE_SIDE_STYLE('',(#7837));+#7837 = SURFACE_STYLE_FILL_AREA(#7838);+#7838 = FILL_AREA_STYLE('',(#7839));+#7839 = FILL_AREA_STYLE_COLOUR('',#7272);+#7840 = STYLED_ITEM('color',(#7841),#5989);+#7841 = PRESENTATION_STYLE_ASSIGNMENT((#7842));+#7842 = SURFACE_STYLE_USAGE(.BOTH.,#7843);+#7843 = SURFACE_SIDE_STYLE('',(#7844));+#7844 = SURFACE_STYLE_FILL_AREA(#7845);+#7845 = FILL_AREA_STYLE('',(#7846));+#7846 = FILL_AREA_STYLE_COLOUR('',#7272);+#7847 = STYLED_ITEM('color',(#7848),#6065);+#7848 = PRESENTATION_STYLE_ASSIGNMENT((#7849));+#7849 = SURFACE_STYLE_USAGE(.BOTH.,#7850);+#7850 = SURFACE_SIDE_STYLE('',(#7851));+#7851 = SURFACE_STYLE_FILL_AREA(#7852);+#7852 = FILL_AREA_STYLE('',(#7853));+#7853 = FILL_AREA_STYLE_COLOUR('',#7272);+#7854 = STYLED_ITEM('color',(#7855),#6141);+#7855 = PRESENTATION_STYLE_ASSIGNMENT((#7856));+#7856 = SURFACE_STYLE_USAGE(.BOTH.,#7857);+#7857 = SURFACE_SIDE_STYLE('',(#7858));+#7858 = SURFACE_STYLE_FILL_AREA(#7859);+#7859 = FILL_AREA_STYLE('',(#7860));+#7860 = FILL_AREA_STYLE_COLOUR('',#7272);+#7861 = STYLED_ITEM('color',(#7862),#6217);+#7862 = PRESENTATION_STYLE_ASSIGNMENT((#7863));+#7863 = SURFACE_STYLE_USAGE(.BOTH.,#7864);+#7864 = SURFACE_SIDE_STYLE('',(#7865));+#7865 = SURFACE_STYLE_FILL_AREA(#7866);+#7866 = FILL_AREA_STYLE('',(#7867));+#7867 = FILL_AREA_STYLE_COLOUR('',#7272);+#7868 = STYLED_ITEM('color',(#7869),#6293);+#7869 = PRESENTATION_STYLE_ASSIGNMENT((#7870));+#7870 = SURFACE_STYLE_USAGE(.BOTH.,#7871);+#7871 = SURFACE_SIDE_STYLE('',(#7872));+#7872 = SURFACE_STYLE_FILL_AREA(#7873);+#7873 = FILL_AREA_STYLE('',(#7874));+#7874 = FILL_AREA_STYLE_COLOUR('',#7272);+#7875 = STYLED_ITEM('color',(#7876),#6364);+#7876 = PRESENTATION_STYLE_ASSIGNMENT((#7877));+#7877 = SURFACE_STYLE_USAGE(.BOTH.,#7878);+#7878 = SURFACE_SIDE_STYLE('',(#7879));+#7879 = SURFACE_STYLE_FILL_AREA(#7880);+#7880 = FILL_AREA_STYLE('',(#7881));+#7881 = FILL_AREA_STYLE_COLOUR('',#7272);+#7882 = STYLED_ITEM('color',(#7883),#6395);+#7883 = PRESENTATION_STYLE_ASSIGNMENT((#7884));+#7884 = SURFACE_STYLE_USAGE(.BOTH.,#7885);+#7885 = SURFACE_SIDE_STYLE('',(#7886));+#7886 = SURFACE_STYLE_FILL_AREA(#7887);+#7887 = FILL_AREA_STYLE('',(#7888));+#7888 = FILL_AREA_STYLE_COLOUR('',#7272);+#7889 = STYLED_ITEM('color',(#7890),#6422);+#7890 = PRESENTATION_STYLE_ASSIGNMENT((#7891));+#7891 = SURFACE_STYLE_USAGE(.BOTH.,#7892);+#7892 = SURFACE_SIDE_STYLE('',(#7893));+#7893 = SURFACE_STYLE_FILL_AREA(#7894);+#7894 = FILL_AREA_STYLE('',(#7895));+#7895 = FILL_AREA_STYLE_COLOUR('',#7272);+#7896 = STYLED_ITEM('color',(#7897),#6435);+#7897 = PRESENTATION_STYLE_ASSIGNMENT((#7898));+#7898 = SURFACE_STYLE_USAGE(.BOTH.,#7899);+#7899 = SURFACE_SIDE_STYLE('',(#7900));+#7900 = SURFACE_STYLE_FILL_AREA(#7901);+#7901 = FILL_AREA_STYLE('',(#7902));+#7902 = FILL_AREA_STYLE_COLOUR('',#7272);+#7903 = STYLED_ITEM('color',(#7904),#6555);+#7904 = PRESENTATION_STYLE_ASSIGNMENT((#7905));+#7905 = SURFACE_STYLE_USAGE(.BOTH.,#7906);+#7906 = SURFACE_SIDE_STYLE('',(#7907));+#7907 = SURFACE_STYLE_FILL_AREA(#7908);+#7908 = FILL_AREA_STYLE('',(#7909));+#7909 = FILL_AREA_STYLE_COLOUR('',#7272);+#7910 = STYLED_ITEM('color',(#7911),#6631);+#7911 = PRESENTATION_STYLE_ASSIGNMENT((#7912));+#7912 = SURFACE_STYLE_USAGE(.BOTH.,#7913);+#7913 = SURFACE_SIDE_STYLE('',(#7914));+#7914 = SURFACE_STYLE_FILL_AREA(#7915);+#7915 = FILL_AREA_STYLE('',(#7916));+#7916 = FILL_AREA_STYLE_COLOUR('',#7272);+#7917 = STYLED_ITEM('color',(#7918),#6707);+#7918 = PRESENTATION_STYLE_ASSIGNMENT((#7919));+#7919 = SURFACE_STYLE_USAGE(.BOTH.,#7920);+#7920 = SURFACE_SIDE_STYLE('',(#7921));+#7921 = SURFACE_STYLE_FILL_AREA(#7922);+#7922 = FILL_AREA_STYLE('',(#7923));+#7923 = FILL_AREA_STYLE_COLOUR('',#7272);+#7924 = STYLED_ITEM('color',(#7925),#6783);+#7925 = PRESENTATION_STYLE_ASSIGNMENT((#7926));+#7926 = SURFACE_STYLE_USAGE(.BOTH.,#7927);+#7927 = SURFACE_SIDE_STYLE('',(#7928));+#7928 = SURFACE_STYLE_FILL_AREA(#7929);+#7929 = FILL_AREA_STYLE('',(#7930));+#7930 = FILL_AREA_STYLE_COLOUR('',#7272);+#7931 = STYLED_ITEM('color',(#7932),#6859);+#7932 = PRESENTATION_STYLE_ASSIGNMENT((#7933));+#7933 = SURFACE_STYLE_USAGE(.BOTH.,#7934);+#7934 = SURFACE_SIDE_STYLE('',(#7935));+#7935 = SURFACE_STYLE_FILL_AREA(#7936);+#7936 = FILL_AREA_STYLE('',(#7937));+#7937 = FILL_AREA_STYLE_COLOUR('',#7272);+#7938 = STYLED_ITEM('color',(#7939),#6935);+#7939 = PRESENTATION_STYLE_ASSIGNMENT((#7940));+#7940 = SURFACE_STYLE_USAGE(.BOTH.,#7941);+#7941 = SURFACE_SIDE_STYLE('',(#7942));+#7942 = SURFACE_STYLE_FILL_AREA(#7943);+#7943 = FILL_AREA_STYLE('',(#7944));+#7944 = FILL_AREA_STYLE_COLOUR('',#7272);+#7945 = STYLED_ITEM('color',(#7946),#7006);+#7946 = PRESENTATION_STYLE_ASSIGNMENT((#7947));+#7947 = SURFACE_STYLE_USAGE(.BOTH.,#7948);+#7948 = SURFACE_SIDE_STYLE('',(#7949));+#7949 = SURFACE_STYLE_FILL_AREA(#7950);+#7950 = FILL_AREA_STYLE('',(#7951));+#7951 = FILL_AREA_STYLE_COLOUR('',#7272);+#7952 = STYLED_ITEM('color',(#7953),#7037);+#7953 = PRESENTATION_STYLE_ASSIGNMENT((#7954));+#7954 = SURFACE_STYLE_USAGE(.BOTH.,#7955);+#7955 = SURFACE_SIDE_STYLE('',(#7956));+#7956 = SURFACE_STYLE_FILL_AREA(#7957);+#7957 = FILL_AREA_STYLE('',(#7958));+#7958 = FILL_AREA_STYLE_COLOUR('',#7272);+#7959 = STYLED_ITEM('color',(#7960),#7064);+#7960 = PRESENTATION_STYLE_ASSIGNMENT((#7961));+#7961 = SURFACE_STYLE_USAGE(.BOTH.,#7962);+#7962 = SURFACE_SIDE_STYLE('',(#7963));+#7963 = SURFACE_STYLE_FILL_AREA(#7964);+#7964 = FILL_AREA_STYLE('',(#7965));+#7965 = FILL_AREA_STYLE_COLOUR('',#7272);+#7966 = STYLED_ITEM('color',(#7967),#7077);+#7967 = PRESENTATION_STYLE_ASSIGNMENT((#7968));+#7968 = SURFACE_STYLE_USAGE(.BOTH.,#7969);+#7969 = SURFACE_SIDE_STYLE('',(#7970));+#7970 = SURFACE_STYLE_FILL_AREA(#7971);+#7971 = FILL_AREA_STYLE('',(#7972));+#7972 = FILL_AREA_STYLE_COLOUR('',#7973);+#7973 = COLOUR_RGB('',0.380000002513,0.380000002513,0.399999997426);+#7974 = STYLED_ITEM('color',(#7975),#7165);+#7975 = PRESENTATION_STYLE_ASSIGNMENT((#7976));+#7976 = SURFACE_STYLE_USAGE(.BOTH.,#7977);+#7977 = SURFACE_SIDE_STYLE('',(#7978));+#7978 = SURFACE_STYLE_FILL_AREA(#7979);+#7979 = FILL_AREA_STYLE('',(#7980));+#7980 = FILL_AREA_STYLE_COLOUR('',#7973);+#7981 = STYLED_ITEM('color',(#7982),#7169);+#7982 = PRESENTATION_STYLE_ASSIGNMENT((#7983));+#7983 = SURFACE_STYLE_USAGE(.BOTH.,#7984);+#7984 = SURFACE_SIDE_STYLE('',(#7985));+#7985 = SURFACE_STYLE_FILL_AREA(#7986);+#7986 = FILL_AREA_STYLE('',(#7987));+#7987 = FILL_AREA_STYLE_COLOUR('',#7973);+ENDSEC;+END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>tmcs1123a2aqdvgr</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>tmcs1123a2aqdvgr</title>