component
TMAG5170A2EDGKRQ1
Public Made by Adomby adom
Texas Instruments Linear Hall Sensors, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# TMAG5170A2EDGKRQ1++**Texas Instruments** · Linear Hall Sensors · VSSOP-8++TMAG5170A2EDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCK | input | Serial clock input for SPI interface, maximum frequency 10MHz with SCK timing requirements specified in Section 6.8. |+| 2 | SDI | input | Serial data input for SPI interface, receives 32-bit command frames from microcontroller with 25ns setup and hold timing. |+| 3 | SDO | tri_state | Serial data output for SPI interface, provides 32-bit response frames when CS low with tri-state high impedance when CS high. |+| 4 | CS | input | Active-low chip select enabling SPI interface with minimum 100ns deselect time required between SPI transactions. |+| 5 | VCC | power_in | Main power supply input accepting 2.3V to 5.5V range with active current 3.4mA and sleep current 1.5µA. |+| 6 | GND | power_in | Ground reference providing 0V potential for the device. |+| 7 | TEST | power_in | TI test pin reserved for factory use, must be connected to ground in applications per power supply recommendations Section 9. |+| 8 | ALERT | bidirectional | Status output and conversion trigger input pin configurable as interrupt mode or magnetic switch with pulse width 5µs to 31µs per Section 7.3.5. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VSSOP-8 |+| Category | Magnetic Sensors |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TMAG5170A2EDGKRQ1`+- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`+- 3D model: VSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `tmag5170a2edgkrq1-etched.step` / `tmag5170a2edgkrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tmag5170a2edgkrq1.step` / `tmag5170a2edgkrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tmag5170-q1) (61 pp, sha256 `afb265676069b691`, retrieved 2026-09-26, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tmag5170a2edgkrq1-datasheet.pdf)
page.jsonadded+156@@ -0,0 +1,156 @@+{+ "slug": "tmag5170a2edgkrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Linear Hall Sensors, VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "magnetic sensors",+ "tmag5170a2edgkrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tmag5170a2edgkrq1.kicad_sym",+ "tmag5170a2edgkrq1.kicad_mod",+ "tmag5170a2edgkrq1.glb",+ "tmag5170a2edgkrq1.step",+ "tmag5170a2edgkrq1.lbr",+ "docs/hero.png",+ "docs/tmag5170a2edgkrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "TMAG5170A2EDGKRQ1",+ "manufacturer": "Texas Instruments",+ "package": "VSSOP-8",+ "pin_count": 8,+ "category": "Magnetic Sensors",+ "subcategory": "Linear Hall Sensors",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tmag5170-q1",+ "parts": {+ "symbol": "tmag5170a2edgkrq1.kicad_sym",+ "footprint": "tmag5170a2edgkrq1.kicad_mod",+ "model_3d": "tmag5170a2edgkrq1-etched.glb",+ "model_3d_plain": "tmag5170a2edgkrq1.glb",+ "model_3d_step": "tmag5170a2edgkrq1-etched.step",+ "model_3d_step_plain": "tmag5170a2edgkrq1.step",+ "lbr": "tmag5170a2edgkrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C3715987",+ "digikey": "296-TMAG5170A2EDGKRQ1TR-ND",+ "mouser": "595-MAG5170A2EDGKRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-09-26T11:37:31Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TMAG5170A2EDGKRQ1TR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-MAG5170A2EDGKRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SCK",+ "type": "input",+ "description": "Serial clock input for SPI interface, maximum frequency 10MHz with SCK timing requirements specified in Section 6.8."+ },+ {+ "number": "2",+ "name": "SDI",+ "type": "input",+ "description": "Serial data input for SPI interface, receives 32-bit command frames from microcontroller with 25ns setup and hold timing."+ },+ {+ "number": "3",+ "name": "SDO",+ "type": "tri_state",+ "description": "Serial data output for SPI interface, provides 32-bit response frames when CS low with tri-state high impedance when CS high."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Active-low chip select enabling SPI interface with minimum 100ns deselect time required between SPI transactions."+ },+ {+ "number": "5",+ "name": "VCC",+ "type": "power_in",+ "description": "Main power supply input accepting 2.3V to 5.5V range with active current 3.4mA and sleep current 1.5µA."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference providing 0V potential for the device."+ },+ {+ "number": "7",+ "name": "TEST",+ "type": "power_in",+ "description": "TI test pin reserved for factory use, must be connected to ground in applications per power supply recommendations Section 9."+ },+ {+ "number": "8",+ "name": "ALERT",+ "type": "bidirectional",+ "description": "Status output and conversion trigger input pin configurable as interrupt mode or magnetic switch with pulse width 5µs to 31µs per Section 7.3.5."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 61,+ "cost_usd": 0.5043,+ "at": "2026-09-26T11:37:13"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tmag5170-q1",+ "pages": 61,+ "sha256": "afb265676069b691",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}