component
TM5020A
Public Made by Adomby adom
TM Shenzhen Titan Micro Elec LED Drivers, SSOP-24-150mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (LCSC_PN C2980109). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+26−6
page.json+6−4@@ -26,7 +26,9 @@ "model_3d_step": "tm5020a.step", "lbr": "tm5020a.lbr" },- "distributor_links": {},+ "distributor_links": {+ "lcsc": "C2980109"+ }, "pins": [ { "number": "1",@@ -50,7 +52,7 @@ "number": "4", "name": "LE", "type": "input",- "description": "Latch enable / data-latch control input with Schmitt-trigger buffer. When LE is high, serial data is transferred into the output latch; when LE is low, data is latched. Internal pull-down to GND (~270 kΩ typical)."+ "description": "Latch enable / data-latch control input with Schmitt-trigger buffer. When LE is high, serial data is transferred into the output latch; when LE is low, data is latched. Internal pull-down to GND (~270 k\u03a9 typical)." }, { "number": "5",@@ -152,7 +154,7 @@ "number": "21", "name": "OE", "type": "input",- "description": "Output enable, active-low. When OE is low, OUT0-OUT15 are enabled; when OE is high, outputs are turned off. Internal pull-up resistor to VDD (~250 kΩ typical)."+ "description": "Output enable, active-low. When OE is low, OUT0-OUT15 are enabled; when OE is high, outputs are turned off. Internal pull-up resistor to VDD (~250 k\u03a9 typical)." }, { "number": "22",@@ -164,7 +166,7 @@ "number": "23", "name": "R-EXT", "type": "passive",- "description": "Constant-current setting pin. Connect an external resistor from R-EXT to GND to set the OUT0-OUT15 output current; IOUT = (1.18 V / R_IREF) x 15 (e.g. 600 Ω → ~29.5 mA, 1 kΩ → ~17.7 mA)."+ "description": "Constant-current setting pin. Connect an external resistor from R-EXT to GND to set the OUT0-OUT15 output current; IOUT = (1.18 V / R_IREF) x 15 (e.g. 600 \u03a9 \u2192 ~29.5 mA, 1 k\u03a9 \u2192 ~17.7 mA)." }, { "number": "24",
tm5020a.lbr+20−2@@ -78,6 +78,18 @@ <smd name="22" x="3.5000" y="2.2750" dx="1.9000" dy="0.4000" layer="1"/> <smd name="23" x="3.5000" y="2.9250" dx="1.9000" dy="0.4000" layer="1"/> <smd name="24" x="3.5000" y="3.5750" dx="1.9000" dy="0.4000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-3.5000" y="4.0400"/>+ <vertex x="-3.8400" y="4.5100"/>+ <vertex x="-3.1600" y="4.5100"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-1.6500" y="4.1000"/>+ <vertex x="2.6500" y="4.1000"/>+ <vertex x="2.6500" y="-4.1000"/>+ <vertex x="-2.6500" y="-4.1000"/>+ <vertex x="-2.6500" y="3.1000"/>+ </polygon> <wire x1="-2.7600" y1="4.2100" x2="2.7600" y2="4.2100" width="0.1200" layer="21"/> <wire x1="-2.7600" y1="4.0350" x2="-2.7600" y2="4.2100" width="0.1200" layer="21"/> <wire x1="-2.7600" y1="-4.2100" x2="-2.7600" y2="-4.0350" width="0.1200" layer="21"/>@@ -86,7 +98,7 @@ <wire x1="2.7600" y1="-4.2100" x2="-2.7600" y2="-4.2100" width="0.1200" layer="21"/> <text x="0" y="5.125" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-5.125" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-3.5000" y="4.0400"/><vertex x="-3.8400" y="4.5100"/><vertex x="-3.1600" y="4.5100"/></polygon></package>+</package> </packages> <symbols> <symbol name="TM5020A">@@ -156,7 +168,13 @@ <connect gate="G$1" pin="OUT9" pad="14"/> <connect gate="G$1" pin="OUT8" pad="13"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="TM5020A" constant="no"/>+ <attribute name="MANUFACTURER" value="TM Shenzhen Titan Micro Elec" constant="no"/>+ <attribute name="LCSC_PN" value="C2980109" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>