component
TM5020A
Public Made by Adomby adom
TM Shenzhen Titan Micro Elec LED Drivers, SSOP-24-150mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -50,7 +50,7 @@ "number": "4", "name": "LE", "type": "input",- "description": "Latch enable / data-latch control input with Schmitt-trigger buffer. When LE is high, serial data is transferred into the output latch; when LE is low, data is latched. Internal pull-down to GND (~270 k\u03a9 typical)."+ "description": "Latch enable / data-latch control input with Schmitt-trigger buffer. When LE is high, serial data is transferred into the output latch; when LE is low, data is latched. Internal pull-down to GND (~270 kΩ typical)." }, { "number": "5",@@ -152,7 +152,7 @@ "number": "21", "name": "OE", "type": "input",- "description": "Output enable, active-low. When OE is low, OUT0-OUT15 are enabled; when OE is high, outputs are turned off. Internal pull-up resistor to VDD (~250 k\u03a9 typical)."+ "description": "Output enable, active-low. When OE is low, OUT0-OUT15 are enabled; when OE is high, outputs are turned off. Internal pull-up resistor to VDD (~250 kΩ typical)." }, { "number": "22",@@ -164,7 +164,7 @@ "number": "23", "name": "R-EXT", "type": "passive",- "description": "Constant-current setting pin. Connect an external resistor from R-EXT to GND to set the OUT0-OUT15 output current; IOUT = (1.18 V / R_IREF) x 15 (e.g. 600 \u03a9 \u2192 ~29.5 mA, 1 k\u03a9 \u2192 ~17.7 mA)."+ "description": "Constant-current setting pin. Connect an external resistor from R-EXT to GND to set the OUT0-OUT15 output current; IOUT = (1.18 V / R_IREF) x 15 (e.g. 600 Ω → ~29.5 mA, 1 kΩ → ~17.7 mA)." }, { "number": "24",@@ -234,5 +234,8 @@ "docs/tm5020a-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }