component
TM1622
Public Made by Adomby adom
TM Shenzhen Titan Micro Elec LCD Drivers, LQFP-52(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+19821
README.mdadded+142@@ -0,0 +1,142 @@+# TM1622++**TM Shenzhen Titan Micro Elec** · LCD Drivers · LQFP-52(14x14)++TM1622 from TM Shenzhen Titan Micro Elec, in a LQFP-52(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS | input | Active-low chip select; when high, read/write of data or commands is invalid and the serial interface is reset, when low data and commands can be read/written. |+| 2 | RD | input | READ-mode clock input; on the falling edge display-memory data is put on DATA and can be latched by the host at the next rising edge. |+| 3 | WR | input | WRITE-mode clock input; data on DATA is written into the TM1622 on the rising edge of WR. |+| 4 | DATA | bidirectional | Serial data input/output. |+| 5 | VSS | power_in | System ground (GND). |+| 6 | OSCI | input | Input for an external 32 KHz clock source; must be left floating when the internal RC oscillator is used. |+| 7 | VDD | power_in | Chip power supply input, operating range 2.4 to 5.2 V. |+| 8 | VLCD | input | LCD bias voltage input; must be less than or equal to VDD. |+| 9 | IRQ | output | Time-base or watchdog timer overflow flag, NMOS open-drain output requiring a 10K pull-up when used. |+| 10 | T1 | input | Bias voltage input; use in normal operation is not recommended. |+| 11 | T2 | input | Bias voltage input; use in normal operation is not recommended. |+| 12 | T3 | input | Bias voltage input; use in normal operation is not recommended. |+| 13 | COM0 | output | LCD COM driver output. |+| 14 | COM1 | output | LCD COM driver output. |+| 15 | COM2 | output | LCD COM driver output. |+| 16 | COM3 | output | LCD COM driver output. |+| 17 | COM4 | output | LCD COM driver output. |+| 18 | COM5 | output | LCD COM driver output. |+| 19 | COM6 | output | LCD COM driver output. |+| 20 | COM7 | output | LCD COM driver output. |+| 21 | SEG0 | output | LCD SEG driver output. |+| 22 | SEG1 | output | LCD SEG driver output. |+| 23 | SEG2 | output | LCD SEG driver output. |+| 24 | SEG3 | output | LCD SEG driver output. |+| 25 | SEG4 | output | LCD SEG driver output. |+| 26 | SEG5 | output | LCD SEG driver output. |+| 27 | SEG6 | output | LCD SEG driver output. |+| 28 | SEG7 | output | LCD SEG driver output. |+| 29 | SEG8 | output | LCD SEG driver output. |+| 30 | SEG9 | output | LCD SEG driver output. |+| 31 | SEG10 | output | LCD SEG driver output. |+| 32 | SEG11 | output | LCD SEG driver output. |+| 33 | SEG12 | output | LCD SEG driver output. |+| 34 | SEG13 | output | LCD SEG driver output. |+| 35 | SEG14 | output | LCD SEG driver output. |+| 36 | SEG15 | output | LCD SEG driver output. |+| 37 | SEG16 | output | LCD SEG driver output. |+| 38 | SEG17 | output | LCD SEG driver output. |+| 39 | SEG18 | output | LCD SEG driver output. |+| 40 | SEG19 | output | LCD SEG driver output. |+| 41 | SEG20 | output | LCD SEG driver output. |+| 42 | SEG21 | output | LCD SEG driver output. |+| 43 | SEG22 | output | LCD SEG driver output. |+| 44 | SEG23 | output | LCD SEG driver output. |+| 45 | SEG24 | output | LCD SEG driver output. |+| 46 | SEG25 | output | LCD SEG driver output. |+| 47 | SEG26 | output | LCD SEG driver output. |+| 48 | SEG27 | output | LCD SEG driver output. |+| 49 | SEG28 | output | LCD SEG driver output. |+| 50 | SEG29 | output | LCD SEG driver output. |+| 51 | SEG30 | output | LCD SEG driver output. |+| 52 | SEG31 | output | LCD SEG driver output. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TM Shenzhen Titan Micro Elec |+| Package | LQFP-52(14x14) |+| Category | LED Drivers |+| Pins | 52 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Supply voltage (recommended) | VDD | 2.7 | 5 | 5.2 | V | | 4 |+| Operating temperature range (recommended) | Ta | -20 | | 85 | ℃ | | 4 |+| Operating junction temperature range (recommended) | Tj | -40 | | 125 | ℃ | | 4 |+| Logic supply voltage (absolute maximum) | VDD | -0.5 | | 7 | V | | 4 |+| Operating temperature range (absolute maximum) | Topr | -40 | | 85 | ℃ | | 4 |+| Storage temperature range (absolute maximum) | Tstg | -55 | | 150 | ℃ | | 4 |+| ESD human body model (HBM) | ESD | | | 2000 | V | | 4 |+| ESD machine model (MM) | | | | 200 | V | | 4 |+| Operating voltage | VDD | 2.4 | 5 | 5.2 | V | | 5 |+| Operating current (internal RC, unloaded) | Idd | | 100 | 300 | μA | VDD=3.0V，片内 RC，空载 | 5 |+| Operating current (internal RC, unloaded) | Idd | | 150 | 500 | μA | VDD=5.0V，片内 RC，空载 | 5 |+| Operating current (external clock, unloaded) | Idd1 | | 50 | 120 | μA | VDD=3.0V，外部时钟，空载 | 5 |+| Operating current (external clock, unloaded) | Idd1 | | 120 | 240 | μA | VDD=5.0V，外部时钟，空载 | 5 |+| Standby current (power-save mode, unloaded) | IDD2 | | 1 | 5 | μA | VDD=3.0V，省电模式，空载 | 5 |+| Standby current (power-save mode, unloaded) | IDD2 | | 1.5 | 10 | μA | VDD=5.0V，省电模式，空载 | 5 |+| Input low voltage | Vil | 0 | | 0.6 | V | VDD=3.0V；DATA, WR, CS, RD | 5 |+| Input low voltage | Vil | 0 | | 1 | V | VDD=5.0V；DATA, WR, CS, RD | 5 |+| Input high voltage | Vih | 1.2 | | 3 | V | VDD=3.0V；DATA, WR, CS, RD | 5 |+| Input high voltage | Vih | 1.6 | | 5 | V | VDD=5.0V；DATA, WR, CS, RD | 5 |+| DATA, BZ, BZ, IRQ sink current | IOL1 | 2 | 4.5 | | mA | VDD=3.0V，Vol=0.5V | 5 |+| DATA, BZ, BZ, IRQ sink current | IOL1 | 1 | 3 | | mA | VDD=5.0V，Vol=0.5V | 5 |+| DATA, BZ, BZ source current | IOh1 | -1 | -2 | | mA | VDD=3.0V，Voh=2.5V | 5 |+| DATA, BZ, BZ source current | IOh1 | -2 | -3.5 | | mA | VDD=5.0V，Voh=4.5V | 5 |+| SEG sink current | Isegl | 280 | 400 | 500 | μA | VDD=3.0V，Vseg=0.5V | 5 |+| SEG sink current | Isegl | 300 | 430 | 550 | μA | VDD=5.0V，Vseg=0.5V | 5 |+| SEG source current | Isegh | -110 | -160 | -210 | μA | VDD=3.0V，Vseg=2.5V | 5 |+| SEG source current | Isegh | -130 | -180 | -230 | μA | VDD=5.0V，Vseg=4.5V | 5 |+| COM sink current | Icoml | 410 | 460 | 510 | μA | VDD=3.0V，Vseg=0.5V | 5 |+| COM source current | Icomh | -120 | -170 | -220 | μA | VDD=3.0V，Vseg=2.5V | 5 |+| COM source current | Icomh | -140 | -190 | -240 | μA | VDD=5.0V，Vseg=4.5V | 5 |+| System clock (internal RC) | Fsys1 | 24 | 32 | 40 | KHz | VDD=3.0V，片内 RC | 4 |+| LCD driver scan frequency (internal RC) | Flcd | 24 | 32 | 40 | Hz | VDD=3.0V，片内 RC | 4 |+| WR clock frequency | Fclk1 | 4 | | 300 | KHz | VDD=5.0V，50%占空比 | 4 |+| WR clock frequency | Fclk1 | 4 | | 150 | KHz | VDD=3.0V，50%占空比 | 4 |+| RD clock frequency | Fclk2 | 1 | | 75 | KHz | VDD=5.0V，50%占空比 | 4 |+| RD clock frequency | Fclk2 | 1 | | 150 | KHz | VDD=3.0V，50%占空比 | 4 |+| CS high width | Tcsh | 500 | 600 | | ns | | 4 |+| WR, RD input level duration (write mode) | Tclk | 3.5 | | 125 | μs | VDD=5.0V，写模式 | 4 |+| WR, RD input level duration (write mode) | Tclk | 1.7 | | 125 | μs | VDD=3.0V，写模式 | 4 |+| WR, RD input level duration (read mode) | Tclk | 6.7 | | | μs | VDD=5.0V，读模式 | 4 |+| WR, RD input level duration (read mode) | Tclk | 3.4 | | | μs | VDD=3.0V，读模式 | 4 |+| Tone output frequency (TONE 2K, internal RC) | Ftone | 1.5 | 2 | 2.5 | KHz | TONE 2K，片内 RC | 4 |+| Tone output frequency (TONE 4K, internal RC) | Ftone | 3 | 4 | 5 | KHz | TONE 4K，片内 RC | 4 |+| External clock frequency | Ext_CLOCK | | 32 | | KHz | | 4 |+| System clock (external clock) | Fsys1 | | 32 | | KHz | VDD=3.0/5.0V，外部时钟 | 4 |+| LCD driver scan frequency (external clock) | Flcd | | 32 | | Hz | VDD=3.0/5.0V，外部时钟 | 4 |++## CAD (KiCad official)++- Symbol: `TM1622`+- Footprint: `Package_QFP:LQFP-52_14x14mm_P1mm`+- 3D model: LQFP-52(14x14) (KiCad packages3D, STEP)+- 3D model files: `tm1622-etched.step` / `tm1622-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm1622.step` / `tm1622.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TM Shenzhen Titan Micro Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603345204967583744) (16 pp, sha256 `cfc72789a0c2b536`, retrieved 2026-10-19, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tm1622-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/tm1622-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+457@@ -0,0 +1,457 @@+{+ "slug": "tm1622",+ "version": "0.1.0",+ "type": "component",+ "description": "TM Shenzhen Titan Micro Elec LCD Drivers, LQFP-52(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tm1622",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tm1622.kicad_sym",+ "tm1622.kicad_mod",+ "tm1622.glb",+ "tm1622.step",+ "tm1622.lbr",+ "docs/hero.png",+ "docs/tm1622-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tm1622-hero.glb",+ "tm1622-hero.overlay.json",+ "tm1622-etched.glb"+ ],+ "component": {+ "mpn": "TM1622",+ "manufacturer": "TM Shenzhen Titan Micro Elec",+ "package": "LQFP-52(14x14)",+ "pin_count": 52,+ "category": "LED Drivers",+ "subcategory": "LCD Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603345204967583744",+ "parts": {+ "symbol": "tm1622.kicad_sym",+ "footprint": "tm1622.kicad_mod",+ "model_3d": "tm1622-hero.glb",+ "model_3d_plain": "tm1622-etched.glb",+ "model_3d_step": "tm1622-etched.step",+ "model_3d_step_plain": "tm1622.step",+ "lbr": "tm1622.lbr"+ },+ "distributor_links": {+ "lcsc": "C22396692"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T10:31:12Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "Active-low chip select; when high, read/write of data or commands is invalid and the serial interface is reset, when low data and commands can be read/written."+ },+ {+ "number": "2",+ "name": "RD",+ "type": "input",+ "description": "READ-mode clock input; on the falling edge display-memory data is put on DATA and can be latched by the host at the next rising edge."+ },+ {+ "number": "3",+ "name": "WR",+ "type": "input",+ "description": "WRITE-mode clock input; data on DATA is written into the TM1622 on the rising edge of WR."+ },+ {+ "number": "4",+ "name": "DATA",+ "type": "bidirectional",+ "description": "Serial data input/output."+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "System ground (GND)."+ },+ {+ "number": "6",+ "name": "OSCI",+ "type": "input",+ "description": "Input for an external 32 KHz clock source; must be left floating when the internal RC oscillator is used."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Chip power supply input, operating range 2.4 to 5.2 V."+ },+ {+ "number": "8",+ "name": "VLCD",+ "type": "input",+ "description": "LCD bias voltage input; must be less than or equal to VDD."+ },+ {+ "number": "9",+ "name": "IRQ",+ "type": "output",+ "description": "Time-base or watchdog timer overflow flag, NMOS open-drain output requiring a 10K pull-up when used."+ },+ {+ "number": "10",+ "name": "T1",+ "type": "input",+ "description": "Bias voltage input; use in normal operation is not recommended."+ },+ {+ "number": "11",+ "name": "T2",+ "type": "input",+ "description": "Bias voltage input; use in normal operation is not recommended."+ },+ {+ "number": "12",+ "name": "T3",+ "type": "input",+ "description": "Bias voltage input; use in normal operation is not recommended."+ },+ {+ "number": "13",+ "name": "COM0",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "14",+ "name": "COM1",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "15",+ "name": "COM2",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "16",+ "name": "COM3",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "17",+ "name": "COM4",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "18",+ "name": "COM5",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "19",+ "name": "COM6",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "20",+ "name": "COM7",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "21",+ "name": "SEG0",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "22",+ "name": "SEG1",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "23",+ "name": "SEG2",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "24",+ "name": "SEG3",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "25",+ "name": "SEG4",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "26",+ "name": "SEG5",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "27",+ "name": "SEG6",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "28",+ "name": "SEG7",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "29",+ "name": "SEG8",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "30",+ "name": "SEG9",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "31",+ "name": "SEG10",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "32",+ "name": "SEG11",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "33",+ "name": "SEG12",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "34",+ "name": "SEG13",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "35",+ "name": "SEG14",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "36",+ "name": "SEG15",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "37",+ "name": "SEG16",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "38",+ "name": "SEG17",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "39",+ "name": "SEG18",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "40",+ "name": "SEG19",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "41",+ "name": "SEG20",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "42",+ "name": "SEG21",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "43",+ "name": "SEG22",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "44",+ "name": "SEG23",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "45",+ "name": "SEG24",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "46",+ "name": "SEG25",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "47",+ "name": "SEG26",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "48",+ "name": "SEG27",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "49",+ "name": "SEG28",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "50",+ "name": "SEG29",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "51",+ "name": "SEG30",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "52",+ "name": "SEG31",+ "type": "output",+ "description": "LCD SEG driver output."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers were read from the QFP52 pin diagram on page 2. The text table on page 3 uses LQFP64 num; Page 4 gives the absolute-maximum supply as -0.5 to +7.0 V and the recommended supply as 2.7 to 5.2 ; The page 13 package drawing is labelled LQFP52 14x14 but the pinout title says QFP52. Both are treat",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 16,+ "cost_usd": 0.3116,+ "at": "2026-10-19T10:30:49"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603345204967583744",+ "pages": 16,+ "sha256": "cfc72789a0c2b536",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 52,+ "described": 52,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tm1622.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16.0,+ 16.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "3b8642879ae45712fc3e8061dd2773120a6eed9e7d2fbd4fa333bd4e3093669f",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tm1622-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16.0,+ 16.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "a7f4adc73c29c020cba85ff71bec3f30c02b01c8f8dc50d731411eb7e833614d",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+463@@ -0,0 +1,463 @@+{+ "slug": "tm1622",+ "version": "0.1.0",+ "type": "component",+ "description": "TM Shenzhen Titan Micro Elec LCD Drivers, LQFP-52(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tm1622",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tm1622.kicad_sym",+ "tm1622.kicad_mod",+ "tm1622.glb",+ "tm1622.step",+ "tm1622.lbr",+ "docs/hero.png",+ "docs/tm1622-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tm1622-hero.glb",+ "tm1622-hero.overlay.json",+ "tm1622-etched.glb"+ ],+ "component": {+ "mpn": "TM1622",+ "manufacturer": "TM Shenzhen Titan Micro Elec",+ "package": "LQFP-52(14x14)",+ "pin_count": 52,+ "category": "LED Drivers",+ "subcategory": "LCD Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603345204967583744",+ "parts": {+ "symbol": "tm1622.kicad_sym",+ "footprint": "tm1622.kicad_mod",+ "model_3d": "tm1622-hero.glb",+ "model_3d_plain": "tm1622-etched.glb",+ "model_3d_step": "tm1622-etched.step",+ "model_3d_step_plain": "tm1622.step",+ "lbr": "tm1622.lbr"+ },+ "distributor_links": {+ "lcsc": "C22396692"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T10:31:12Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "input",+ "description": "Active-low chip select; when high, read/write of data or commands is invalid and the serial interface is reset, when low data and commands can be read/written."+ },+ {+ "number": "2",+ "name": "RD",+ "type": "input",+ "description": "READ-mode clock input; on the falling edge display-memory data is put on DATA and can be latched by the host at the next rising edge."+ },+ {+ "number": "3",+ "name": "WR",+ "type": "input",+ "description": "WRITE-mode clock input; data on DATA is written into the TM1622 on the rising edge of WR."+ },+ {+ "number": "4",+ "name": "DATA",+ "type": "bidirectional",+ "description": "Serial data input/output."+ },+ {+ "number": "5",+ "name": "VSS",+ "type": "power_in",+ "description": "System ground (GND)."+ },+ {+ "number": "6",+ "name": "OSCI",+ "type": "input",+ "description": "Input for an external 32 KHz clock source; must be left floating when the internal RC oscillator is used."+ },+ {+ "number": "7",+ "name": "VDD",+ "type": "power_in",+ "description": "Chip power supply input, operating range 2.4 to 5.2 V."+ },+ {+ "number": "8",+ "name": "VLCD",+ "type": "input",+ "description": "LCD bias voltage input; must be less than or equal to VDD."+ },+ {+ "number": "9",+ "name": "IRQ",+ "type": "output",+ "description": "Time-base or watchdog timer overflow flag, NMOS open-drain output requiring a 10K pull-up when used."+ },+ {+ "number": "10",+ "name": "T1",+ "type": "input",+ "description": "Bias voltage input; use in normal operation is not recommended."+ },+ {+ "number": "11",+ "name": "T2",+ "type": "input",+ "description": "Bias voltage input; use in normal operation is not recommended."+ },+ {+ "number": "12",+ "name": "T3",+ "type": "input",+ "description": "Bias voltage input; use in normal operation is not recommended."+ },+ {+ "number": "13",+ "name": "COM0",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "14",+ "name": "COM1",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "15",+ "name": "COM2",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "16",+ "name": "COM3",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "17",+ "name": "COM4",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "18",+ "name": "COM5",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "19",+ "name": "COM6",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "20",+ "name": "COM7",+ "type": "output",+ "description": "LCD COM driver output."+ },+ {+ "number": "21",+ "name": "SEG0",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "22",+ "name": "SEG1",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "23",+ "name": "SEG2",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "24",+ "name": "SEG3",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "25",+ "name": "SEG4",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "26",+ "name": "SEG5",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "27",+ "name": "SEG6",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "28",+ "name": "SEG7",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "29",+ "name": "SEG8",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "30",+ "name": "SEG9",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "31",+ "name": "SEG10",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "32",+ "name": "SEG11",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "33",+ "name": "SEG12",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "34",+ "name": "SEG13",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "35",+ "name": "SEG14",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "36",+ "name": "SEG15",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "37",+ "name": "SEG16",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "38",+ "name": "SEG17",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "39",+ "name": "SEG18",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "40",+ "name": "SEG19",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "41",+ "name": "SEG20",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "42",+ "name": "SEG21",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "43",+ "name": "SEG22",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "44",+ "name": "SEG23",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "45",+ "name": "SEG24",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "46",+ "name": "SEG25",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "47",+ "name": "SEG26",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "48",+ "name": "SEG27",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "49",+ "name": "SEG28",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "50",+ "name": "SEG29",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "51",+ "name": "SEG30",+ "type": "output",+ "description": "LCD SEG driver output."+ },+ {+ "number": "52",+ "name": "SEG31",+ "type": "output",+ "description": "LCD SEG driver output."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: Pin numbers were read from the QFP52 pin diagram on page 2. The text table on page 3 uses LQFP64 num; Page 4 gives the absolute-maximum supply as -0.5 to +7.0 V and the recommended supply as 2.7 to 5.2 ; The page 13 package drawing is labelled LQFP52 14x14 but the pinout title says QFP52. Both are treat",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 16,+ "cost_usd": 0.3116,+ "at": "2026-10-19T10:30:49"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603345204967583744",+ "pages": 16,+ "sha256": "cfc72789a0c2b536",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 52,+ "described": 52,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tm1622.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "3b8642879ae45712fc3e8061dd2773120a6eed9e7d2fbd4fa333bd4e3093669f",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tm1622-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 16,+ 16,+ 1.5+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a7f4adc73c29c020cba85ff71bec3f30c02b01c8f8dc50d731411eb7e833614d",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
tm1622-etched.glbadded⋯ 1 unchanged line ⋯
tm1622-hero.glbadded⋯ 1 unchanged line ⋯
tm1622-hero.overlay.jsonadded+1228@@ -0,0 +1,1228 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "TM1622",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 52,+ "span_mm": 16.9,+ "dash_mm": 0.4225,+ "gap_mm": 0.2535,+ "pad_stroke_mm": 0.09+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 9,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 52,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 1.352,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -8.0,+ 8.0,+ -8.0,+ 8.0+ ],+ "pads_bbox_mm": [+ -8.45,+ 8.45,+ -8.45,+ 8.45+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "tm1622-etched.glb",+ "glb_sha256": "36db0c27173547fe0bf3b0c198fb916be8128d684abd32c2913400f4dccd7cbf",+ "footprint": "tm1622.kicad_mod",+ "footprint_sha256": "04f4634086839d9f41a2169245d3e58eb0828933e3281cea2575a9524beddf85",+ "pins": "page.json component.pins",+ "pins_sha256": "87c956bb8165146876d3d03c18ad0596d71382f706ee60b8eeac4e7290645683"+ },+ "generator": "adom-wiki 1.7.74 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "CS",+ "x": -8.575,+ "y": -6.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "2",+ "text": "RD",+ "x": -8.575,+ "y": -5.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "3",+ "text": "WR",+ "x": -8.575,+ "y": -4.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "4",+ "text": "DATA",+ "x": -8.575,+ "y": -3.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "5",+ "text": "VSS",+ "x": -8.575,+ "y": -2.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "6",+ "text": "OSCI",+ "x": -8.575,+ "y": -1.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "7",+ "text": "VDD",+ "x": -8.575,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "8",+ "text": "VLCD",+ "x": -8.575,+ "y": 1.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "9",+ "text": "IRQ",+ "x": -8.575,+ "y": 2.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "10",+ "text": "T1",+ "x": -8.575,+ "y": 3.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "11",+ "text": "T2",+ "x": -8.575,+ "y": 4.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "12",+ "text": "T3",+ "x": -8.575,+ "y": 5.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "13",+ "text": "COM0",+ "x": -8.575,+ "y": 6.0,+ "align": "right",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "14",+ "text": "COM1",+ "x": -6.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "15",+ "text": "COM2",+ "x": -5.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "16",+ "text": "COM3",+ "x": -4.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "17",+ "text": "COM4",+ "x": -3.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "18",+ "text": "COM5",+ "x": -2.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "19",+ "text": "COM6",+ "x": -1.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "20",+ "text": "COM7",+ "x": 0.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "21",+ "text": "SEG0",+ "x": 1.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "22",+ "text": "SEG1",+ "x": 2.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "23",+ "text": "SEG2",+ "x": 3.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "24",+ "text": "SEG3",+ "x": 4.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "25",+ "text": "SEG4",+ "x": 5.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "26",+ "text": "SEG5",+ "x": 6.0,+ "y": 8.575,+ "align": "right",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "27",+ "text": "SEG6",+ "x": 8.575,+ "y": 6.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "28",+ "text": "SEG7",+ "x": 8.575,+ "y": 5.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "29",+ "text": "SEG8",+ "x": 8.575,+ "y": 4.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "30",+ "text": "SEG9",+ "x": 8.575,+ "y": 3.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "31",+ "text": "SEG10",+ "x": 8.575,+ "y": 2.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "32",+ "text": "SEG11",+ "x": 8.575,+ "y": 1.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "33",+ "text": "SEG12",+ "x": 8.575,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "34",+ "text": "SEG13",+ "x": 8.575,+ "y": -1.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "35",+ "text": "SEG14",+ "x": 8.575,+ "y": -2.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "36",+ "text": "SEG15",+ "x": 8.575,+ "y": -3.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "37",+ "text": "SEG16",+ "x": 8.575,+ "y": -4.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "38",+ "text": "SEG17",+ "x": 8.575,+ "y": -5.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "39",+ "text": "SEG18",+ "x": 8.575,+ "y": -6.0,+ "align": "left",+ "vertical": false,+ "h": 0.5+ },+ {+ "pad": "40",+ "text": "SEG19",+ "x": 6.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "41",+ "text": "SEG20",+ "x": 5.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "42",+ "text": "SEG21",+ "x": 4.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "43",+ "text": "SEG22",+ "x": 3.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "44",+ "text": "SEG23",+ "x": 2.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "45",+ "text": "SEG24",+ "x": 1.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "46",+ "text": "SEG25",+ "x": 0.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "47",+ "text": "SEG26",+ "x": -1.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "48",+ "text": "SEG27",+ "x": -2.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "49",+ "text": "SEG28",+ "x": -3.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "50",+ "text": "SEG29",+ "x": -4.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "51",+ "text": "SEG30",+ "x": -5.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ },+ {+ "pad": "52",+ "text": "SEG31",+ "x": -6.0,+ "y": -8.575,+ "align": "left",+ "vertical": true,+ "h": 0.5+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -6.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -5.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -4.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -3.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -2.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ -1.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 0.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 1.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 2.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 3.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 4.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 5.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ -7.675,+ 6.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ -6.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ -5.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ -4.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ -3.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ -2.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ 2.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ 3.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ 4.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "roundrect",+ "center_mm": [+ 5.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "roundrect",+ "center_mm": [+ 6.0,+ 7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 6.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 5.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "29",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 4.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "30",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 3.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "31",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 2.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "32",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 1.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "33",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ 0.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "34",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -1.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "35",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -2.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "36",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -3.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "37",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -4.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "38",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -5.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "39",+ "shape": "roundrect",+ "center_mm": [+ 7.675,+ -6.0+ ],+ "size_mm": [+ 1.55,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "40",+ "shape": "roundrect",+ "center_mm": [+ 6.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "41",+ "shape": "roundrect",+ "center_mm": [+ 5.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "42",+ "shape": "roundrect",+ "center_mm": [+ 4.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "43",+ "shape": "roundrect",+ "center_mm": [+ 3.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "44",+ "shape": "roundrect",+ "center_mm": [+ 2.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "45",+ "shape": "roundrect",+ "center_mm": [+ 1.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "46",+ "shape": "roundrect",+ "center_mm": [+ 0.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "47",+ "shape": "roundrect",+ "center_mm": [+ -1.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "48",+ "shape": "roundrect",+ "center_mm": [+ -2.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "49",+ "shape": "roundrect",+ "center_mm": [+ -3.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "50",+ "shape": "roundrect",+ "center_mm": [+ -4.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "51",+ "shape": "roundrect",+ "center_mm": [+ -5.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ },+ {+ "number": "52",+ "shape": "roundrect",+ "center_mm": [+ -6.0,+ -7.675+ ],+ "size_mm": [+ 0.6,+ 1.55+ ],+ "rot": 0.0+ }+ ]+}
tm1622.glbadded⋯ 1 unchanged line ⋯
tm1622.kicad_modadded+480@@ -0,0 +1,480 @@+(footprint "LQFP-52_14x14mm_P1mm"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "LQFP, 52 Pin (http://www.holtek.com/documents/10179/116711/HT1632Cv170.pdf)")+ (tags "LQFP QFP")+ (property "Reference" "REF**"+ (at 0 -9.4 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "LQFP-52_14x14mm_P1mm"+ (at 0 9.4 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/gullwing"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -7.11 -7.11)+ (end -6.56 -7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -7.11 -6.56)+ (end -7.11 -7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -7.11 7.11)+ (end -7.11 6.56)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -6.56 7.11)+ (end -7.11 7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 6.56 -7.11)+ (end 7.11 -7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 7.11 -7.11)+ (end 7.11 -6.56)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 7.11 6.56)+ (end 7.11 7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 7.11 7.11)+ (end 6.56 7.11)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -7.75 -6.56)+ (xy -8.09 -7.03)+ (xy -7.41 -7.03)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ )+ (fp_poly+ (pts+ (xy -6 -7)+ (xy 7 -7)+ (xy 7 7)+ (xy -7 7)+ (xy -7 -6)+ )+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 0 0 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" smd roundrect+ (at -7.675 -6)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "2" smd roundrect+ (at -7.675 -5)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "3" smd roundrect+ (at -7.675 -4)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "4" smd roundrect+ (at -7.675 -3)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "5" smd roundrect+ (at -7.675 -2)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "6" smd roundrect+ (at -7.675 -1)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "7" smd roundrect+ (at -7.675 0)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "8" smd roundrect+ (at -7.675 1)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "9" smd roundrect+ (at -7.675 2)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "10" smd roundrect+ (at -7.675 3)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "11" smd roundrect+ (at -7.675 4)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "12" smd roundrect+ (at -7.675 5)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "13" smd roundrect+ (at -7.675 6)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "14" smd roundrect+ (at -6 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "15" smd roundrect+ (at -5 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "16" smd roundrect+ (at -4 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "17" smd roundrect+ (at -3 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "18" smd roundrect+ (at -2 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "19" smd roundrect+ (at -1 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "20" smd roundrect+ (at 0 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "21" smd roundrect+ (at 1 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "22" smd roundrect+ (at 2 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "23" smd roundrect+ (at 3 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "24" smd roundrect+ (at 4 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "25" smd roundrect+ (at 5 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "26" smd roundrect+ (at 6 7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "27" smd roundrect+ (at 7.675 6)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "28" smd roundrect+ (at 7.675 5)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "29" smd roundrect+ (at 7.675 4)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "30" smd roundrect+ (at 7.675 3)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "31" smd roundrect+ (at 7.675 2)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "32" smd roundrect+ (at 7.675 1)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "33" smd roundrect+ (at 7.675 0)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "34" smd roundrect+ (at 7.675 -1)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "35" smd roundrect+ (at 7.675 -2)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "36" smd roundrect+ (at 7.675 -3)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "37" smd roundrect+ (at 7.675 -4)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "38" smd roundrect+ (at 7.675 -5)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "39" smd roundrect+ (at 7.675 -6)+ (size 1.55 0.6)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "40" smd roundrect+ (at 6 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "41" smd roundrect+ (at 5 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "42" smd roundrect+ (at 4 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "43" smd roundrect+ (at 3 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "44" smd roundrect+ (at 2 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "45" smd roundrect+ (at 1 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "46" smd roundrect+ (at 0 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "47" smd roundrect+ (at -1 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "48" smd roundrect+ (at -2 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "49" smd roundrect+ (at -3 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "50" smd roundrect+ (at -4 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "51" smd roundrect+ (at -5 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (pad "52" smd roundrect+ (at -6 -7.675)+ (size 0.6 1.55)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (roundrect_rratio 0.25)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_QFP.3dshapes/LQFP-52_14x14mm_P1mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+ (fp_poly+ (pts (xy -8.70 -6.55) (xy -7.25 -6.55) (xy -7.25 -7.25) (xy -6.55 -7.25) (xy -6.55 -8.70) (xy 6.55 -8.70) (xy 6.55 -7.25) (xy 7.25 -7.25) (xy 7.25 -6.55) (xy 8.70 -6.55) (xy 8.70 6.55) (xy 7.25 6.55) (xy 7.25 7.25) (xy 6.55 7.25) (xy 6.55 8.70) (xy -6.55 8.70) (xy -6.55 7.25) (xy -7.25 7.25) (xy -7.25 6.55) (xy -8.70 6.55))+ (stroke (width 0.05) (type solid))+ (fill no)+ (layer "F.CrtYd")+ )+)
tm1622.kicad_symadded+221@@ -0,0 +1,221 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "TM1622" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 35.56 0) (effects (font (size 1.27 1.27))))+ (property "Value" "TM1622" (at 0 -38.10 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "TM1622_0_1"+ (rectangle (start -12.70 33.02) (end 12.70 -35.56)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "TM1622_1_1"+ (pin input line (at -17.78 30.48 0) (length 5.08)+ (name "CS" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 27.94 0) (length 5.08)+ (name "RD" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 25.40 0) (length 5.08)+ (name "WR" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin bidirectional line (at -17.78 22.86 0) (length 5.08)+ (name "DATA" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 20.32 0) (length 5.08)+ (name "VSS" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 17.78 0) (length 5.08)+ (name "OSCI" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 15.24 0) (length 5.08)+ (name "VDD" (effects (font (size 1.27 1.27))))+ (number "7" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 12.70 0) (length 5.08)+ (name "VLCD" (effects (font (size 1.27 1.27))))+ (number "8" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 10.16 0) (length 5.08)+ (name "IRQ" (effects (font (size 1.27 1.27))))+ (number "9" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 7.62 0) (length 5.08)+ (name "T1" (effects (font (size 1.27 1.27))))+ (number "10" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 5.08 0) (length 5.08)+ (name "T2" (effects (font (size 1.27 1.27))))+ (number "11" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 2.54 0) (length 5.08)+ (name "T3" (effects (font (size 1.27 1.27))))+ (number "12" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 0.00 0) (length 5.08)+ (name "COM0" (effects (font (size 1.27 1.27))))+ (number "13" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -2.54 0) (length 5.08)+ (name "COM1" (effects (font (size 1.27 1.27))))+ (number "14" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -5.08 0) (length 5.08)+ (name "COM2" (effects (font (size 1.27 1.27))))+ (number "15" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -7.62 0) (length 5.08)+ (name "COM3" (effects (font (size 1.27 1.27))))+ (number "16" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -10.16 0) (length 5.08)+ (name "COM4" (effects (font (size 1.27 1.27))))+ (number "17" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -12.70 0) (length 5.08)+ (name "COM5" (effects (font (size 1.27 1.27))))+ (number "18" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -15.24 0) (length 5.08)+ (name "COM6" (effects (font (size 1.27 1.27))))+ (number "19" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -17.78 0) (length 5.08)+ (name "COM7" (effects (font (size 1.27 1.27))))+ (number "20" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -20.32 0) (length 5.08)+ (name "SEG0" (effects (font (size 1.27 1.27))))+ (number "21" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -22.86 0) (length 5.08)+ (name "SEG1" (effects (font (size 1.27 1.27))))+ (number "22" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -25.40 0) (length 5.08)+ (name "SEG2" (effects (font (size 1.27 1.27))))+ (number "23" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -27.94 0) (length 5.08)+ (name "SEG3" (effects (font (size 1.27 1.27))))+ (number "24" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -30.48 0) (length 5.08)+ (name "SEG4" (effects (font (size 1.27 1.27))))+ (number "25" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at -17.78 -33.02 0) (length 5.08)+ (name "SEG5" (effects (font (size 1.27 1.27))))+ (number "26" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 30.48 180) (length 5.08)+ (name "SEG31" (effects (font (size 1.27 1.27))))+ (number "52" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 27.94 180) (length 5.08)+ (name "SEG30" (effects (font (size 1.27 1.27))))+ (number "51" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 25.40 180) (length 5.08)+ (name "SEG29" (effects (font (size 1.27 1.27))))+ (number "50" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 22.86 180) (length 5.08)+ (name "SEG28" (effects (font (size 1.27 1.27))))+ (number "49" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 20.32 180) (length 5.08)+ (name "SEG27" (effects (font (size 1.27 1.27))))+ (number "48" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 17.78 180) (length 5.08)+ (name "SEG26" (effects (font (size 1.27 1.27))))+ (number "47" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 15.24 180) (length 5.08)+ (name "SEG25" (effects (font (size 1.27 1.27))))+ (number "46" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 12.70 180) (length 5.08)+ (name "SEG24" (effects (font (size 1.27 1.27))))+ (number "45" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 10.16 180) (length 5.08)+ (name "SEG23" (effects (font (size 1.27 1.27))))+ (number "44" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 7.62 180) (length 5.08)+ (name "SEG22" (effects (font (size 1.27 1.27))))+ (number "43" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 5.08 180) (length 5.08)+ (name "SEG21" (effects (font (size 1.27 1.27))))+ (number "42" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 2.54 180) (length 5.08)+ (name "SEG20" (effects (font (size 1.27 1.27))))+ (number "41" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 0.00 180) (length 5.08)+ (name "SEG19" (effects (font (size 1.27 1.27))))+ (number "40" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -2.54 180) (length 5.08)+ (name "SEG18" (effects (font (size 1.27 1.27))))+ (number "39" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -5.08 180) (length 5.08)+ (name "SEG17" (effects (font (size 1.27 1.27))))+ (number "38" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -7.62 180) (length 5.08)+ (name "SEG16" (effects (font (size 1.27 1.27))))+ (number "37" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -10.16 180) (length 5.08)+ (name "SEG15" (effects (font (size 1.27 1.27))))+ (number "36" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -12.70 180) (length 5.08)+ (name "SEG14" (effects (font (size 1.27 1.27))))+ (number "35" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -15.24 180) (length 5.08)+ (name "SEG13" (effects (font (size 1.27 1.27))))+ (number "34" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -17.78 180) (length 5.08)+ (name "SEG12" (effects (font (size 1.27 1.27))))+ (number "33" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -20.32 180) (length 5.08)+ (name "SEG11" (effects (font (size 1.27 1.27))))+ (number "32" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -22.86 180) (length 5.08)+ (name "SEG10" (effects (font (size 1.27 1.27))))+ (number "31" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -25.40 180) (length 5.08)+ (name "SEG9" (effects (font (size 1.27 1.27))))+ (number "30" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -27.94 180) (length 5.08)+ (name "SEG8" (effects (font (size 1.27 1.27))))+ (number "29" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -30.48 180) (length 5.08)+ (name "SEG7" (effects (font (size 1.27 1.27))))+ (number "28" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -33.02 180) (length 5.08)+ (name "SEG6" (effects (font (size 1.27 1.27))))+ (number "27" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
tm1622.lbradded+264@@ -0,0 +1,264 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="LQFP-52_14x14mm_P1mm">+ <description>LQFP-52, 14 x 14 mm, 1 mm pitch</description>+ <smd name="1" x="-7.6750" y="6.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="2" x="-7.6750" y="5.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="3" x="-7.6750" y="4.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="4" x="-7.6750" y="3.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="5" x="-7.6750" y="2.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="6" x="-7.6750" y="1.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="7" x="-7.6750" y="-0.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="8" x="-7.6750" y="-1.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="9" x="-7.6750" y="-2.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="10" x="-7.6750" y="-3.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="11" x="-7.6750" y="-4.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="12" x="-7.6750" y="-5.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="13" x="-7.6750" y="-6.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="14" x="-6.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="15" x="-5.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="16" x="-4.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="17" x="-3.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="18" x="-2.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="19" x="-1.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="20" x="0.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="21" x="1.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="22" x="2.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="23" x="3.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="24" x="4.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="25" x="5.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="26" x="6.0000" y="-7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="27" x="7.6750" y="-6.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="28" x="7.6750" y="-5.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="29" x="7.6750" y="-4.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="30" x="7.6750" y="-3.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="31" x="7.6750" y="-2.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="32" x="7.6750" y="-1.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="33" x="7.6750" y="-0.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="34" x="7.6750" y="1.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="35" x="7.6750" y="2.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="36" x="7.6750" y="3.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="37" x="7.6750" y="4.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="38" x="7.6750" y="5.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="39" x="7.6750" y="6.0000" dx="1.5500" dy="0.6000" layer="1" roundness="50"/>+ <smd name="40" x="6.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="41" x="5.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="42" x="4.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="43" x="3.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="44" x="2.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="45" x="1.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="46" x="0.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="47" x="-1.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="48" x="-2.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="49" x="-3.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="50" x="-4.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="51" x="-5.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <smd name="52" x="-6.0000" y="7.6750" dx="0.6000" dy="1.5500" layer="1" roundness="50"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-7.7500" y="6.5600"/>+ <vertex x="-8.0900" y="7.0300"/>+ <vertex x="-7.4100" y="7.0300"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-6.0000" y="7.0000"/>+ <vertex x="7.0000" y="7.0000"/>+ <vertex x="7.0000" y="-7.0000"/>+ <vertex x="-7.0000" y="-7.0000"/>+ <vertex x="-7.0000" y="6.0000"/>+ </polygon>+ <wire x1="-7.1100" y1="7.1100" x2="-6.5600" y2="7.1100" width="0.1200" layer="21"/>+ <wire x1="-7.1100" y1="6.5600" x2="-7.1100" y2="7.1100" width="0.1200" layer="21"/>+ <wire x1="-7.1100" y1="-7.1100" x2="-7.1100" y2="-6.5600" width="0.1200" layer="21"/>+ <wire x1="-6.5600" y1="-7.1100" x2="-7.1100" y2="-7.1100" width="0.1200" layer="21"/>+ <wire x1="6.5600" y1="7.1100" x2="7.1100" y2="7.1100" width="0.1200" layer="21"/>+ <wire x1="7.1100" y1="7.1100" x2="7.1100" y2="6.5600" width="0.1200" layer="21"/>+ <wire x1="7.1100" y1="-6.5600" x2="7.1100" y2="-7.1100" width="0.1200" layer="21"/>+ <wire x1="7.1100" y1="-7.1100" x2="6.5600" y2="-7.1100" width="0.1200" layer="21"/>+ <text x="0" y="9.050" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-9.050" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="TM1622">+ <wire x1="-12.7" y1="33.02" x2="12.7" y2="33.02" width="0.254" layer="94"/>+ <wire x1="12.7" y1="33.02" x2="12.7" y2="-35.56" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-35.56" x2="-12.7" y2="-35.56" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-35.56" x2="-12.7" y2="33.02" width="0.254" layer="94"/>+ <text x="0.0000" y="35.5600" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-38.1000" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="CS" x="-17.78" y="30.48" length="middle" direction="in"/>+ <pin name="RD" x="-17.78" y="27.94" length="middle" direction="in"/>+ <pin name="WR" x="-17.78" y="25.4" length="middle" direction="in"/>+ <pin name="DATA" x="-17.78" y="22.86" length="middle" direction="io"/>+ <pin name="VSS" x="-17.78" y="20.32" length="middle" direction="pwr"/>+ <pin name="OSCI" x="-17.78" y="17.78" length="middle" direction="in"/>+ <pin name="VDD" x="-17.78" y="15.24" length="middle" direction="pwr"/>+ <pin name="VLCD" x="-17.78" y="12.7" length="middle" direction="in"/>+ <pin name="IRQ" x="-17.78" y="10.16" length="middle" direction="out"/>+ <pin name="T1" x="-17.78" y="7.62" length="middle" direction="in"/>+ <pin name="T2" x="-17.78" y="5.08" length="middle" direction="in"/>+ <pin name="T3" x="-17.78" y="2.54" length="middle" direction="in"/>+ <pin name="COM0" x="-17.78" y="0" length="middle" direction="out"/>+ <pin name="COM1" x="-17.78" y="-2.54" length="middle" direction="out"/>+ <pin name="COM2" x="-17.78" y="-5.08" length="middle" direction="out"/>+ <pin name="COM3" x="-17.78" y="-7.62" length="middle" direction="out"/>+ <pin name="COM4" x="-17.78" y="-10.16" length="middle" direction="out"/>+ <pin name="COM5" x="-17.78" y="-12.7" length="middle" direction="out"/>+ <pin name="COM6" x="-17.78" y="-15.24" length="middle" direction="out"/>+ <pin name="COM7" x="-17.78" y="-17.78" length="middle" direction="out"/>+ <pin name="SEG0" x="-17.78" y="-20.32" length="middle" direction="out"/>+ <pin name="SEG1" x="-17.78" y="-22.86" length="middle" direction="out"/>+ <pin name="SEG2" x="-17.78" y="-25.4" length="middle" direction="out"/>+ <pin name="SEG3" x="-17.78" y="-27.94" length="middle" direction="out"/>+ <pin name="SEG4" x="-17.78" y="-30.48" length="middle" direction="out"/>+ <pin name="SEG5" x="-17.78" y="-33.02" length="middle" direction="out"/>+ <pin name="SEG31" x="17.78" y="30.48" length="middle" direction="out" rot="R180"/>+ <pin name="SEG30" x="17.78" y="27.94" length="middle" direction="out" rot="R180"/>+ <pin name="SEG29" x="17.78" y="25.4" length="middle" direction="out" rot="R180"/>+ <pin name="SEG28" x="17.78" y="22.86" length="middle" direction="out" rot="R180"/>+ <pin name="SEG27" x="17.78" y="20.32" length="middle" direction="out" rot="R180"/>+ <pin name="SEG26" x="17.78" y="17.78" length="middle" direction="out" rot="R180"/>+ <pin name="SEG25" x="17.78" y="15.24" length="middle" direction="out" rot="R180"/>+ <pin name="SEG24" x="17.78" y="12.7" length="middle" direction="out" rot="R180"/>+ <pin name="SEG23" x="17.78" y="10.16" length="middle" direction="out" rot="R180"/>+ <pin name="SEG22" x="17.78" y="7.62" length="middle" direction="out" rot="R180"/>+ <pin name="SEG21" x="17.78" y="5.08" length="middle" direction="out" rot="R180"/>+ <pin name="SEG20" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>+ <pin name="SEG19" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+ <pin name="SEG18" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>+ <pin name="SEG17" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+ <pin name="SEG16" x="17.78" y="-7.62" length="middle" direction="out" rot="R180"/>+ <pin name="SEG15" x="17.78" y="-10.16" length="middle" direction="out" rot="R180"/>+ <pin name="SEG14" x="17.78" y="-12.7" length="middle" direction="out" rot="R180"/>+ <pin name="SEG13" x="17.78" y="-15.24" length="middle" direction="out" rot="R180"/>+ <pin name="SEG12" x="17.78" y="-17.78" length="middle" direction="out" rot="R180"/>+ <pin name="SEG11" x="17.78" y="-20.32" length="middle" direction="out" rot="R180"/>+ <pin name="SEG10" x="17.78" y="-22.86" length="middle" direction="out" rot="R180"/>+ <pin name="SEG9" x="17.78" y="-25.4" length="middle" direction="out" rot="R180"/>+ <pin name="SEG8" x="17.78" y="-27.94" length="middle" direction="out" rot="R180"/>+ <pin name="SEG7" x="17.78" y="-30.48" length="middle" direction="out" rot="R180"/>+ <pin name="SEG6" x="17.78" y="-33.02" length="middle" direction="out" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="TM1622" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="TM1622" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="LQFP-52_14x14mm_P1mm">+ <connects>+ <connect gate="G$1" pin="CS" pad="1"/>+ <connect gate="G$1" pin="RD" pad="2"/>+ <connect gate="G$1" pin="WR" pad="3"/>+ <connect gate="G$1" pin="DATA" pad="4"/>+ <connect gate="G$1" pin="VSS" pad="5"/>+ <connect gate="G$1" pin="OSCI" pad="6"/>+ <connect gate="G$1" pin="VDD" pad="7"/>+ <connect gate="G$1" pin="VLCD" pad="8"/>+ <connect gate="G$1" pin="IRQ" pad="9"/>+ <connect gate="G$1" pin="T1" pad="10"/>+ <connect gate="G$1" pin="T2" pad="11"/>+ <connect gate="G$1" pin="T3" pad="12"/>+ <connect gate="G$1" pin="COM0" pad="13"/>+ <connect gate="G$1" pin="COM1" pad="14"/>+ <connect gate="G$1" pin="COM2" pad="15"/>+ <connect gate="G$1" pin="COM3" pad="16"/>+ <connect gate="G$1" pin="COM4" pad="17"/>+ <connect gate="G$1" pin="COM5" pad="18"/>+ <connect gate="G$1" pin="COM6" pad="19"/>+ <connect gate="G$1" pin="COM7" pad="20"/>+ <connect gate="G$1" pin="SEG0" pad="21"/>+ <connect gate="G$1" pin="SEG1" pad="22"/>+ <connect gate="G$1" pin="SEG2" pad="23"/>+ <connect gate="G$1" pin="SEG3" pad="24"/>+ <connect gate="G$1" pin="SEG4" pad="25"/>+ <connect gate="G$1" pin="SEG5" pad="26"/>+ <connect gate="G$1" pin="SEG31" pad="52"/>+ <connect gate="G$1" pin="SEG30" pad="51"/>+ <connect gate="G$1" pin="SEG29" pad="50"/>+ <connect gate="G$1" pin="SEG28" pad="49"/>+ <connect gate="G$1" pin="SEG27" pad="48"/>+ <connect gate="G$1" pin="SEG26" pad="47"/>+ <connect gate="G$1" pin="SEG25" pad="46"/>+ <connect gate="G$1" pin="SEG24" pad="45"/>+ <connect gate="G$1" pin="SEG23" pad="44"/>+ <connect gate="G$1" pin="SEG22" pad="43"/>+ <connect gate="G$1" pin="SEG21" pad="42"/>+ <connect gate="G$1" pin="SEG20" pad="41"/>+ <connect gate="G$1" pin="SEG19" pad="40"/>+ <connect gate="G$1" pin="SEG18" pad="39"/>+ <connect gate="G$1" pin="SEG17" pad="38"/>+ <connect gate="G$1" pin="SEG16" pad="37"/>+ <connect gate="G$1" pin="SEG15" pad="36"/>+ <connect gate="G$1" pin="SEG14" pad="35"/>+ <connect gate="G$1" pin="SEG13" pad="34"/>+ <connect gate="G$1" pin="SEG12" pad="33"/>+ <connect gate="G$1" pin="SEG11" pad="32"/>+ <connect gate="G$1" pin="SEG10" pad="31"/>+ <connect gate="G$1" pin="SEG9" pad="30"/>+ <connect gate="G$1" pin="SEG8" pad="29"/>+ <connect gate="G$1" pin="SEG7" pad="28"/>+ <connect gate="G$1" pin="SEG6" pad="27"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
tm1622.stepadded+16564@@ -0,0 +1,16564 @@+ISO-10303-21;+HEADER;+/* LQFP-52_14x14mm_P1mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of LQFP-52_14x14mm_P1mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'LQFP-52_14x14mm_P1mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('LQFP-52_14x14mm_P1mm','LQFP-52_14x14mm_P1mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#15672);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#154,#180,#234,#288,#313,#326,#348,#361,#383,#396,#418,#431,#453,#466,#488,#501,#523,#536,#558,#571,#593,#606,#628,#641,#663,#676,#698,#711,#733,#766,#786,#910,#942,#979,#1046,#1065,#1083,#1110,#1230,#1246,#1321,#1388,#1398,#1410,#1473,#1540,#1550,#1562,#1625,#1692,#1702,#1714,#1777,#1844,#1854,#1866,#1929,#1996,#2006,#2018,#2081,#2148,#2158,#2170,#2233,#2300,#2310,#2322,#2385,#2452,#2462,#2474,#2537,#2604,#2614,#2626,#2689,#2756,#2766,#2778,#2841,#2908,#2918,#2930,#2993,#3060,#3070,#3082,#3145,#3212,#3222,#3244,#3264,#3280,#3287,#3312,#3340,#3353,#3375,#3388,#3410,#3423,#3445,#3458,#3480,#3493,#3515,#3528,#3550,#3563,#3585,#3598,#3620,#3633,#3655,#3668,#3690,#3703,#3725,#3738,#3760,#3791,#3814,#3852,#3875,#3895,#3901,#3919,#3992,#4109,#4175,#4188,#4198,#4235,#4257,#4270,#4292,#4305,#4327,#4340,#4362,#4375,#4397,#4410,#4432,#4445,#4467,#4480,#4502,#4515,#4537,#4550,#4572,#4585,#4607,#4620,#4637,#4647,#4700,#4711,#4721,#4731,#4741,#4751,#4761,#4772,#4781,#4789,#4799,#4809,#4819,#4829,#4839,#4849,#4859,#4868,#4876,#4886,#4896,#4906,#4916,#4926,#4936,#4946,#4955,#4963,#4973,#4983,#4993,#5003,#5013,#5023,#5033,#5042,#5050,#5060,#5070,#5080,#5090,#5100,#5110,#5120,#5129,#5137,#5147,#5157,#5167,#5177,#5187,#5197,#5207,#5216,#5224,#5234,#5244,#5254,#5264,#5274,#5284,#5294,#5303,#5311,#5321,#5331,#5341,#5351,#5361,#5371,#5381,#5390,#5398,#5408,#5418,#5428,#5438,#5448,#5458,#5468,#5477,#5485,#5495,#5505,#5515,#5525,#5535,#5545,#5555,#5564,#5572,#5582,#5592,#5602,#5612,#5622,#5632,#5642,#5651,#5659,#5669,#5679,#5689,#5699,#5709,#5719,#5729,#5738,#5746,#5756,#5766,#5776,#5786,#5796,#5806,#5816,#5825,#5833,#5904,#5971,#5981,#6101,#6111,#6217,#6226,#6289,#6354,#6364,#6373,#6436,#6501,#6511,#6520,#6583,#6648,#6658,#6667,#6730,#6795,#6805,#6814,#6877,#6942,#6952,#6961,#7024,#7089,#7099,#7108,#7171,#7236,#7246,#7255,#7318,#7383,#7393,#7402,#7465,#7530,#7540,#7549,#7612,#7677,#7687,#7696,#7759,#7824,#7834,#7843,#7906,#7971,#7981,#8005,#8025,#8038,#8044,#8063,#8074,#8083,#8093,#8103,#8113,#8123,#8134,#8143,#8151,#8163,#8184,#8197,#8218,#8231,#8252,#8265,#8286,#8299,#8320,#8333,#8354,#8367,#8388,#8401,#8422,#8435,#8456,#8469,#8490,#8503,#8524,#8537,#8558,#8568,#8581,#8592,#8605,#8627,#8685,#8740,#8750,#8808,#8863,#8873,#8931,#8986,#8996,#9054,#9109,#9119,#9177,#9232,#9242,#9300,#9355,#9365,#9423,#9478,#9488,#9546,#9601,#9611,#9669,#9724,#9734,#9792,#9847,#9857,#9915,#9970,#9980,#10038,#10093,#10103,#10114,#10123,#10133,#10143,#10153,#10163,#10174,#10183,#10191,#10200,#10210,#10220,#10230,#10240,#10250,#10260,#10270,#10280,#10290,#10300,#10310,#10320,#10333,#10355,#10368,#10390,#10403,#10425,#10438,#10460,#10473,#10495,#10508,#10530,#10543,#10565,#10578,#10600,#10613,#10635,#10648,#10670,#10683,#10705,#10713,#10723,#10732,#10742,#10752,#10762,#10772,#10782,#10789,#10799,#10808,#10818,#10828,#10838,#10848,#10858,#10865,#10875,#10884,#10894,#10904,#10914,#10924,#10934,#10941,#10951,#10960,#10970,#10980,#10990,#11000,#11010,#11017,#11027,#11036,#11046,#11056,#11066,#11076,#11086,#11093,#11103,#11112,#11122,#11132,#11142,#11152,#11162,#11169,#11179,#11188,#11198,#11208,#11218,#11228,#11238,#11245,#11255,#11264,#11274,#11284,#11294,#11304,#11314,#11321,#11331,#11340,#11350,#11360,#11370,#11380,#11390,#11397,#11407,#11416,#11426,#11436,#11446,#11456,#11466,#11473,#11483,#11492,#11502,#11512,#11522,#11532,#11542,#11549,#11559,#11568,#11578,#11588,#11598,#11608,#11618,#11625,#11699,#11766,#11776,#11880,#11889,#11898,#11907,#11916,#11925,#11934,#11943,#11952,#11961,#11970,#11979,#11988,#12049,#12115,#12125,#12135,#12144,#12154,#12164,#12174,#12184,#12192,#12202,#12211,#12221,#12231,#12241,#12251,#12259,#12269,#12278,#12288,#12298,#12308,#12318,#12326,#12336,#12345,#12355,#12365,#12375,#12385,#12393,#12403,#12412,#12422,#12432,#12442,#12452,#12460,#12470,#12479,#12489,#12499,#12509,#12519,#12527,#12537,#12546,#12556,#12566,#12576,#12586,#12594,#12604,#12613,#12623,#12633,#12643,#12653,#12661,#12671,#12680,#12690,#12700,#12710,#12720,#12728,#12738,#12747,#12757,#12767,#12777,#12787,#12795,#12805,#12814,#12824,#12834,#12844,#12854,#12862,#12872,#12881,#12891,#12901,#12911,#12921,#12929,#12938,#13001,#13066,#13076,#13085,#13148,#13213,#13223,#13232,#13295,#13360,#13370,#13379,#13442,#13507,#13517,#13526,#13589,#13654,#13664,#13673,#13736,#13801,#13811,#13820,#13883,#13948,#13958,#13967,#14030,#14095,#14105,#14114,#14177,#14242,#14252,#14261,#14324,#14389,#14399,#14408,#14471,#14536,#14546,#14552,#14563,#14572,#14582,#14592,#14602,#14612,#14623,#14632,#14640,#14650,#14660,#14670,#14680,#14690,#14700,#14710,#14720,#14730,#14740,#14750,#14760,#14770,#14779,#14789,#14799,#14809,#14819,#14829,#14836,#14846,#14855,#14865,#14875,#14885,#14895,#14905,#14912,#14922,#14931,#14941,#14951,#14961,#14971,#14981,#14988,#14998,#15007,#15017,#15027,#15037,#15047,#15057,#15064,#15074,#15083,#15093,#15103,#15113,#15123,#15133,#15140,#15150,#15159,#15169,#15179,#15189,#15199,#15209,#15216,#15226,#15235,#15245,#15255,#15265,#15275,#15285,#15292,#15302,#15311,#15321,#15331,#15341,#15351,#15361,#15368,#15378,#15387,#15397,#15407,#15417,#15427,#15437,#15444,#15454,#15463,#15473,#15483,#15493,#15503,#15513,#15520,#15530,#15539,#15549,#15559,#15569,#15579,#15589,#15596,#15606,#15615,#15625,#15635,#15645,#15655,#15665));+#17=ADVANCED_FACE('',(#18),#153,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#28,#38,#44,#51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111,#115,#119,#123,#127,#131,#135,#139,#143,#147,#151));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(6.7875,6.925,0.85));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(6.722628206646,6.795256413291,1.460395584541));+#26=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#27),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#27=CARTESIAN_POINT('',(6.718419117457,6.786838234914,1.5));+#28=ORIENTED_EDGE('',*,*,#29,.F.);+#29=EDGE_CURVE('',#30,#24,#32,.T.);+#30=VERTEX_POINT('',#31);+#31=CARTESIAN_POINT('',(-6.722628206646,6.795256413291,1.460395584541));+#32=B_SPLINE_CURVE_WITH_KNOTS('',2,(#33,#34,#35,#36,#37),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#33=CARTESIAN_POINT('',(-7.416775919098,6.795256413291,1.460395584541));+#34=CARTESIAN_POINT('',(-7.087842119108,6.795256413291,1.460395584541));+#35=CARTESIAN_POINT('',(1.021931826573E-15,6.795256413291,1.460395584541));+#36=CARTESIAN_POINT('',(7.087842119108,6.795256413291,1.460395584541));+#37=CARTESIAN_POINT('',(7.416775919098,6.795256413291,1.460395584541));+#38=ORIENTED_EDGE('',*,*,#39,.F.);+#39=EDGE_CURVE('',#40,#30,#42,.T.);+#40=VERTEX_POINT('',#41);+#41=CARTESIAN_POINT('',(-6.7875,6.925,0.85));+#42=B_SPLINE_CURVE_WITH_KNOTS('',1,(#41,#43),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=CARTESIAN_POINT('',(-6.718419117457,6.786838234914,1.5));+#44=ORIENTED_EDGE('',*,*,#45,.T.);+#45=EDGE_CURVE('',#40,#46,#48,.T.);+#46=VERTEX_POINT('',#47);+#47=CARTESIAN_POINT('',(-6.22,6.925,0.85));+#48=LINE('',#41,#49);+#49=VECTOR('',#50,1.);+#50=DIRECTION('',(1.,1.110223024625E-16,0.));+#51=ORIENTED_EDGE('',*,*,#52,.T.);+#52=EDGE_CURVE('',#46,#53,#48,.T.);+#53=VERTEX_POINT('',#54);+#54=CARTESIAN_POINT('',(-5.78,6.925,0.85));+#55=ORIENTED_EDGE('',*,*,#56,.T.);+#56=EDGE_CURVE('',#53,#57,#48,.T.);+#57=VERTEX_POINT('',#58);+#58=CARTESIAN_POINT('',(-5.22,6.925,0.85));+#59=ORIENTED_EDGE('',*,*,#60,.T.);+#60=EDGE_CURVE('',#57,#61,#48,.T.);+#61=VERTEX_POINT('',#62);+#62=CARTESIAN_POINT('',(-4.78,6.925,0.85));+#63=ORIENTED_EDGE('',*,*,#64,.T.);+#64=EDGE_CURVE('',#61,#65,#48,.T.);+#65=VERTEX_POINT('',#66);+#66=CARTESIAN_POINT('',(-4.22,6.925,0.85));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#65,#69,#48,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-3.78,6.925,0.85));+#71=ORIENTED_EDGE('',*,*,#72,.T.);+#72=EDGE_CURVE('',#69,#73,#48,.T.);+#73=VERTEX_POINT('',#74);+#74=CARTESIAN_POINT('',(-3.22,6.925,0.85));+#75=ORIENTED_EDGE('',*,*,#76,.T.);+#76=EDGE_CURVE('',#73,#77,#48,.T.);+#77=VERTEX_POINT('',#78);+#78=CARTESIAN_POINT('',(-2.78,6.925,0.85));+#79=ORIENTED_EDGE('',*,*,#80,.T.);+#80=EDGE_CURVE('',#77,#81,#48,.T.);+#81=VERTEX_POINT('',#82);+#82=CARTESIAN_POINT('',(-2.22,6.925,0.85));+#83=ORIENTED_EDGE('',*,*,#84,.T.);+#84=EDGE_CURVE('',#81,#85,#48,.T.);+#85=VERTEX_POINT('',#86);+#86=CARTESIAN_POINT('',(-1.78,6.925,0.85));+#87=ORIENTED_EDGE('',*,*,#88,.T.);+#88=EDGE_CURVE('',#85,#89,#48,.T.);+#89=VERTEX_POINT('',#90);+#90=CARTESIAN_POINT('',(-1.22,6.925,0.85));+#91=ORIENTED_EDGE('',*,*,#92,.T.);+#92=EDGE_CURVE('',#89,#93,#48,.T.);+#93=VERTEX_POINT('',#94);+#94=CARTESIAN_POINT('',(-0.78,6.925,0.85));+#95=ORIENTED_EDGE('',*,*,#96,.T.);+#96=EDGE_CURVE('',#93,#97,#48,.T.);+#97=VERTEX_POINT('',#98);+#98=CARTESIAN_POINT('',(-0.22,6.925,0.85));+#99=ORIENTED_EDGE('',*,*,#100,.T.);+#100=EDGE_CURVE('',#97,#101,#48,.T.);+#101=VERTEX_POINT('',#102);+#102=CARTESIAN_POINT('',(0.22,6.925,0.85));+#103=ORIENTED_EDGE('',*,*,#104,.T.);+#104=EDGE_CURVE('',#101,#105,#48,.T.);+#105=VERTEX_POINT('',#106);+#106=CARTESIAN_POINT('',(0.78,6.925,0.85));+#107=ORIENTED_EDGE('',*,*,#108,.T.);+#108=EDGE_CURVE('',#105,#109,#48,.T.);+#109=VERTEX_POINT('',#110);+#110=CARTESIAN_POINT('',(1.22,6.925,0.85));+#111=ORIENTED_EDGE('',*,*,#112,.T.);+#112=EDGE_CURVE('',#109,#113,#48,.T.);+#113=VERTEX_POINT('',#114);+#114=CARTESIAN_POINT('',(1.78,6.925,0.85));+#115=ORIENTED_EDGE('',*,*,#116,.T.);+#116=EDGE_CURVE('',#113,#117,#48,.T.);+#117=VERTEX_POINT('',#118);+#118=CARTESIAN_POINT('',(2.22,6.925,0.85));+#119=ORIENTED_EDGE('',*,*,#120,.T.);+#120=EDGE_CURVE('',#117,#121,#48,.T.);+#121=VERTEX_POINT('',#122);+#122=CARTESIAN_POINT('',(2.78,6.925,0.85));+#123=ORIENTED_EDGE('',*,*,#124,.T.);+#124=EDGE_CURVE('',#121,#125,#48,.T.);+#125=VERTEX_POINT('',#126);+#126=CARTESIAN_POINT('',(3.22,6.925,0.85));+#127=ORIENTED_EDGE('',*,*,#128,.T.);+#128=EDGE_CURVE('',#125,#129,#48,.T.);+#129=VERTEX_POINT('',#130);+#130=CARTESIAN_POINT('',(3.78,6.925,0.85));+#131=ORIENTED_EDGE('',*,*,#132,.T.);+#132=EDGE_CURVE('',#129,#133,#48,.T.);+#133=VERTEX_POINT('',#134);+#134=CARTESIAN_POINT('',(4.22,6.925,0.85));+#135=ORIENTED_EDGE('',*,*,#136,.T.);+#136=EDGE_CURVE('',#133,#137,#48,.T.);+#137=VERTEX_POINT('',#138);+#138=CARTESIAN_POINT('',(4.78,6.925,0.85));+#139=ORIENTED_EDGE('',*,*,#140,.T.);+#140=EDGE_CURVE('',#137,#141,#48,.T.);+#141=VERTEX_POINT('',#142);+#142=CARTESIAN_POINT('',(5.22,6.925,0.85));+#143=ORIENTED_EDGE('',*,*,#144,.T.);+#144=EDGE_CURVE('',#141,#145,#48,.T.);+#145=VERTEX_POINT('',#146);+#146=CARTESIAN_POINT('',(5.78,6.925,0.85));+#147=ORIENTED_EDGE('',*,*,#148,.T.);+#148=EDGE_CURVE('',#145,#149,#48,.T.);+#149=VERTEX_POINT('',#150);+#150=CARTESIAN_POINT('',(6.22,6.925,0.85));+#151=ORIENTED_EDGE('',*,*,#152,.T.);+#152=EDGE_CURVE('',#149,#22,#48,.T.);+#153=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#41,#43),(#23,#27)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#154=ADVANCED_FACE('',(#155),#179,.F.);+#155=FACE_BOUND('',#156,.F.);+#156=EDGE_LOOP('',(#157,#165,#173,#174));+#157=ORIENTED_EDGE('',*,*,#158,.T.);+#158=EDGE_CURVE('',#159,#161,#163,.T.);+#159=VERTEX_POINT('',#160);+#160=CARTESIAN_POINT('',(6.925,6.7875,0.85));+#161=VERTEX_POINT('',#162);+#162=CARTESIAN_POINT('',(6.795128681966,6.722564340983,1.460996513181));+#163=B_SPLINE_CURVE_WITH_KNOTS('',1,(#160,#164),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#164=CARTESIAN_POINT('',(6.786838234914,6.718419117457,1.5));+#165=ORIENTED_EDGE('',*,*,#166,.F.);+#166=EDGE_CURVE('',#24,#161,#167,.T.);+#167=B_SPLINE_CURVE_WITH_KNOTS('',2,(#168,#169,#170,#171,#172),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#168=CARTESIAN_POINT('',(6.519827987965,6.997865034984,1.460996513181));+#169=CARTESIAN_POINT('',(6.608096545662,6.909596477286,1.460996513181));+#170=CARTESIAN_POINT('',(6.758846511474,6.758846511474,1.460996513181));+#171=CARTESIAN_POINT('',(6.909596477286,6.608096545662,1.460996513181));+#172=CARTESIAN_POINT('',(6.997865034984,6.519827987965,1.460996513181));+#173=ORIENTED_EDGE('',*,*,#21,.F.);+#174=ORIENTED_EDGE('',*,*,#175,.T.);+#175=EDGE_CURVE('',#22,#159,#176,.T.);+#176=LINE('',#23,#177);+#177=VECTOR('',#178,1.);+#178=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#179=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#27),(#160,#164)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#180=ADVANCED_FACE('',(#181),#228,.T.);+#181=FACE_BOUND('',#182,.T.);+#182=EDGE_LOOP('',(#183,#202,#212,#28));+#183=ORIENTED_EDGE('',*,*,#184,.T.);+#184=EDGE_CURVE('',#30,#185,#187,.T.);+#185=VERTEX_POINT('',#186);+#186=CARTESIAN_POINT('',(-6.702364620346,6.746349033255,1.5));+#187=B_SPLINE_CURVE_WITH_KNOTS('',7,(#188,#189,#190,#191,#192,#193,#194,#195,#196,#197,#198,#199,#200,#201),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.287114751963,1.),.UNSPECIFIED.);+#188=CARTESIAN_POINT('',(-6.722568209866,6.795124813083,1.460996513181));+#189=CARTESIAN_POINT('',(-6.722334349043,6.794560223113,1.463500790273));+#190=CARTESIAN_POINT('',(-6.722033505414,6.793833922343,1.466023287274));+#191=CARTESIAN_POINT('',(-6.721662300087,6.792937753409,1.468547417085));+#192=CARTESIAN_POINT('',(-6.72121850494,6.791866337146,1.471053722456));+#193=CARTESIAN_POINT('',(-6.720701322937,6.79061774934,1.473520981663));+#194=CARTESIAN_POINT('',(-6.720111668451,6.789194197483,1.475927314193));+#195=CARTESIAN_POINT('',(-6.717815649655,6.783651117766,1.484021542055));+#196=CARTESIAN_POINT('',(-6.715749857523,6.778663854387,1.489283850135));+#197=CARTESIAN_POINT('',(-6.71329859628,6.772745986234,1.493715636718));+#198=CARTESIAN_POINT('',(-6.710573320655,6.766166588893,1.497005951412));+#199=CARTESIAN_POINT('',(-6.707760272226,6.75937528918,1.49905908446));+#200=CARTESIAN_POINT('',(-6.704993414942,6.752695504834,1.500000212186));+#201=CARTESIAN_POINT('',(-6.702364620347,6.746349033255,1.5));+#202=ORIENTED_EDGE('',*,*,#203,.T.);+#203=EDGE_CURVE('',#185,#204,#206,.T.);+#204=VERTEX_POINT('',#205);+#205=CARTESIAN_POINT('',(6.702364620346,6.746349033255,1.5));+#206=B_SPLINE_CURVE_WITH_KNOTS('',2,(#207,#208,#209,#210,#211),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#207=CARTESIAN_POINT('',(-7.416775919098,6.746349033255,1.5));+#208=CARTESIAN_POINT('',(-7.087842119108,6.746349033255,1.5));+#209=CARTESIAN_POINT('',(1.027361636513E-15,6.746349033255,1.5));+#210=CARTESIAN_POINT('',(7.087842119108,6.746349033255,1.5));+#211=CARTESIAN_POINT('',(7.416775919098,6.746349033255,1.5));+#212=ORIENTED_EDGE('',*,*,#213,.F.);+#213=EDGE_CURVE('',#24,#204,#214,.T.);+#214=B_SPLINE_CURVE_WITH_KNOTS('',7,(#215,#216,#217,#218,#219,#220,#221,#222,#223,#224,#225,#226,#227,#205),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290258407455,1.),.UNSPECIFIED.);+#215=CARTESIAN_POINT('',(6.722568209866,6.795124813083,1.460996513181));+#216=CARTESIAN_POINT('',(6.722331788471,6.794554041347,1.463528209919));+#217=CARTESIAN_POINT('',(6.722026910263,6.793818000241,1.466078525983));+#218=CARTESIAN_POINT('',(6.721650081747,6.792908255727,1.468630328488));+#219=CARTESIAN_POINT('',(6.721199014991,6.791819284247,1.471163479142));+#220=CARTESIAN_POINT('',(6.720672920856,6.790549180652,1.473656007605));+#221=CARTESIAN_POINT('',(6.720072802235,6.789100366138,1.476085284837));+#222=CARTESIAN_POINT('',(6.717760879705,6.78351889141,1.484160543135));+#223=CARTESIAN_POINT('',(6.715695756437,6.778533242809,1.489381305402));+#224=CARTESIAN_POINT('',(6.713250515509,6.772629908993,1.493773592334));+#225=CARTESIAN_POINT('',(6.710536108109,6.766076749845,1.497032992729));+#226=CARTESIAN_POINT('',(6.707735872866,6.75931638393,1.499067393924));+#227=CARTESIAN_POINT('',(6.704981822485,6.752667518159,1.500000204988));+#228=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#33,#34,#35,#36,#37),(#229,#230,#231,#232,#233),(#207,#208,#209,#210,#211)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,13.517816638234),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#229=CARTESIAN_POINT('',(-7.416775919098,6.786838234914,1.5));+#230=CARTESIAN_POINT('',(-7.087842119108,6.786838234914,1.5));+#231=CARTESIAN_POINT('',(9.608177093727E-16,6.786838234914,1.5));+#232=CARTESIAN_POINT('',(7.087842119108,6.786838234914,1.5));+#233=CARTESIAN_POINT('',(7.416775919098,6.786838234914,1.5));+#234=ADVANCED_FACE('',(#235),#283,.F.);+#235=FACE_BOUND('',#236,.F.);+#236=EDGE_LOOP('',(#237,#246,#251,#257,#258,#263,#271,#279));+#237=ORIENTED_EDGE('',*,*,#238,.T.);+#238=EDGE_CURVE('',#239,#241,#243,.T.);+#239=VERTEX_POINT('',#240);+#240=CARTESIAN_POINT('',(-7.,6.825,0.85));+#241=VERTEX_POINT('',#242);+#242=CARTESIAN_POINT('',(-6.825,7.,0.85));+#243=LINE('',#240,#244);+#244=VECTOR('',#245,1.);+#245=DIRECTION('',(0.707106781187,0.707106781187,0.));+#246=ORIENTED_EDGE('',*,*,#247,.T.);+#247=EDGE_CURVE('',#241,#248,#250,.T.);+#248=VERTEX_POINT('',#249);+#249=CARTESIAN_POINT('',(-6.22,7.,0.85));+#250=LINE('',#242,#49);+#251=ORIENTED_EDGE('',*,*,#252,.T.);+#252=EDGE_CURVE('',#248,#46,#253,.T.);+#253=LINE('',#254,#255);+#254=CARTESIAN_POINT('',(-6.22,7.2,0.85));+#255=VECTOR('',#256,1.);+#256=DIRECTION('',(0.,-1.,0.));+#257=ORIENTED_EDGE('',*,*,#45,.F.);+#258=ORIENTED_EDGE('',*,*,#259,.F.);+#259=EDGE_CURVE('',#260,#40,#262,.T.);+#260=VERTEX_POINT('',#261);+#261=CARTESIAN_POINT('',(-6.925,6.7875,0.85));+#262=LINE('',#261,#244);+#263=ORIENTED_EDGE('',*,*,#264,.F.);+#264=EDGE_CURVE('',#265,#260,#267,.T.);+#265=VERTEX_POINT('',#266);+#266=CARTESIAN_POINT('',(-6.925,6.22,0.85));+#267=LINE('',#268,#269);+#268=CARTESIAN_POINT('',(-6.925,-6.7875,0.85));+#269=VECTOR('',#270,1.);+#270=DIRECTION('',(-1.110223024625E-16,1.,0.));+#271=ORIENTED_EDGE('',*,*,#272,.F.);+#272=EDGE_CURVE('',#273,#265,#275,.T.);+#273=VERTEX_POINT('',#274);+#274=CARTESIAN_POINT('',(-7.,6.22,0.85));+#275=LINE('',#276,#277);+#276=CARTESIAN_POINT('',(-7.2,6.22,0.85));+#277=VECTOR('',#278,1.);+#278=DIRECTION('',(1.,-1.144237745222E-17,0.));+#279=ORIENTED_EDGE('',*,*,#280,.T.);+#280=EDGE_CURVE('',#273,#239,#281,.T.);+#281=LINE('',#282,#269);+#282=CARTESIAN_POINT('',(-7.,-6.825,0.85));+#283=PLANE('',#284);+#284=AXIS2_PLACEMENT_3D('',#285,#286,#287);+#285=CARTESIAN_POINT('',(-7.876734159316E-16,6.9625,0.85));+#286=DIRECTION('',(4.925677741891E-33,-1.412560849569E-27,-1.));+#287=DIRECTION('',(1.,1.0562486726E-16,4.925677741741E-33));+#288=ADVANCED_FACE('',(#289),#310,.F.);+#289=FACE_BOUND('',#290,.F.);+#290=EDGE_LOOP('',(#291,#294,#301,#306,#308,#309));+#291=ORIENTED_EDGE('',*,*,#292,.F.);+#292=EDGE_CURVE('',#293,#248,#253,.T.);+#293=VERTEX_POINT('',#254);+#294=ORIENTED_EDGE('',*,*,#295,.T.);+#295=EDGE_CURVE('',#293,#296,#298,.T.);+#296=VERTEX_POINT('',#297);+#297=CARTESIAN_POINT('',(-5.78,7.2,0.85));+#298=LINE('',#254,#299);+#299=VECTOR('',#300,1.);+#300=DIRECTION('',(1.,0.,0.));+#301=ORIENTED_EDGE('',*,*,#302,.T.);+#302=EDGE_CURVE('',#296,#303,#305,.T.);+#303=VERTEX_POINT('',#304);+#304=CARTESIAN_POINT('',(-5.78,7.,0.85));+#305=LINE('',#297,#255);+#306=ORIENTED_EDGE('',*,*,#307,.T.);+#307=EDGE_CURVE('',#303,#53,#305,.T.);+#308=ORIENTED_EDGE('',*,*,#52,.F.);+#309=ORIENTED_EDGE('',*,*,#252,.F.);+#310=PLANE('',#311);+#311=AXIS2_PLACEMENT_3D('',#254,#312,#256);+#312=DIRECTION('',(0.,0.,-1.));+#313=ADVANCED_FACE('',(#314),#283,.F.);+#314=FACE_BOUND('',#315,.F.);+#315=EDGE_LOOP('',(#316,#317,#321,#325));+#316=ORIENTED_EDGE('',*,*,#307,.F.);+#317=ORIENTED_EDGE('',*,*,#318,.T.);+#318=EDGE_CURVE('',#303,#319,#250,.T.);+#319=VERTEX_POINT('',#320);+#320=CARTESIAN_POINT('',(-5.22,7.,0.85));+#321=ORIENTED_EDGE('',*,*,#322,.T.);+#322=EDGE_CURVE('',#319,#57,#323,.T.);+#323=LINE('',#324,#255);+#324=CARTESIAN_POINT('',(-5.22,7.2,0.85));+#325=ORIENTED_EDGE('',*,*,#56,.F.);+#326=ADVANCED_FACE('',(#327),#346,.F.);+#327=FACE_BOUND('',#328,.F.);+#328=EDGE_LOOP('',(#329,#332,#337,#342,#344,#345));+#329=ORIENTED_EDGE('',*,*,#330,.F.);+#330=EDGE_CURVE('',#331,#319,#323,.T.);+#331=VERTEX_POINT('',#324);+#332=ORIENTED_EDGE('',*,*,#333,.T.);+#333=EDGE_CURVE('',#331,#334,#336,.T.);+#334=VERTEX_POINT('',#335);+#335=CARTESIAN_POINT('',(-4.78,7.2,0.85));+#336=LINE('',#324,#299);+#337=ORIENTED_EDGE('',*,*,#338,.T.);+#338=EDGE_CURVE('',#334,#339,#341,.T.);+#339=VERTEX_POINT('',#340);+#340=CARTESIAN_POINT('',(-4.78,7.,0.85));+#341=LINE('',#335,#255);+#342=ORIENTED_EDGE('',*,*,#343,.T.);+#343=EDGE_CURVE('',#339,#61,#341,.T.);+#344=ORIENTED_EDGE('',*,*,#60,.F.);+#345=ORIENTED_EDGE('',*,*,#322,.F.);+#346=PLANE('',#347);+#347=AXIS2_PLACEMENT_3D('',#324,#312,#256);+#348=ADVANCED_FACE('',(#349),#283,.F.);+#349=FACE_BOUND('',#350,.F.);+#350=EDGE_LOOP('',(#351,#352,#356,#360));+#351=ORIENTED_EDGE('',*,*,#343,.F.);+#352=ORIENTED_EDGE('',*,*,#353,.T.);+#353=EDGE_CURVE('',#339,#354,#250,.T.);+#354=VERTEX_POINT('',#355);+#355=CARTESIAN_POINT('',(-4.22,7.,0.85));+#356=ORIENTED_EDGE('',*,*,#357,.T.);+#357=EDGE_CURVE('',#354,#65,#358,.T.);+#358=LINE('',#359,#255);+#359=CARTESIAN_POINT('',(-4.22,7.2,0.85));+#360=ORIENTED_EDGE('',*,*,#64,.F.);+#361=ADVANCED_FACE('',(#362),#381,.F.);+#362=FACE_BOUND('',#363,.F.);+#363=EDGE_LOOP('',(#364,#367,#372,#377,#379,#380));+#364=ORIENTED_EDGE('',*,*,#365,.F.);+#365=EDGE_CURVE('',#366,#354,#358,.T.);+#366=VERTEX_POINT('',#359);+#367=ORIENTED_EDGE('',*,*,#368,.T.);+#368=EDGE_CURVE('',#366,#369,#371,.T.);+#369=VERTEX_POINT('',#370);+#370=CARTESIAN_POINT('',(-3.78,7.2,0.85));+#371=LINE('',#359,#299);+#372=ORIENTED_EDGE('',*,*,#373,.T.);+#373=EDGE_CURVE('',#369,#374,#376,.T.);+#374=VERTEX_POINT('',#375);+#375=CARTESIAN_POINT('',(-3.78,7.,0.85));+#376=LINE('',#370,#255);+#377=ORIENTED_EDGE('',*,*,#378,.T.);+#378=EDGE_CURVE('',#374,#69,#376,.T.);+#379=ORIENTED_EDGE('',*,*,#68,.F.);+#380=ORIENTED_EDGE('',*,*,#357,.F.);+#381=PLANE('',#382);+#382=AXIS2_PLACEMENT_3D('',#359,#312,#256);+#383=ADVANCED_FACE('',(#384),#283,.F.);+#384=FACE_BOUND('',#385,.F.);+#385=EDGE_LOOP('',(#386,#387,#391,#395));+#386=ORIENTED_EDGE('',*,*,#378,.F.);+#387=ORIENTED_EDGE('',*,*,#388,.T.);+#388=EDGE_CURVE('',#374,#389,#250,.T.);+#389=VERTEX_POINT('',#390);+#390=CARTESIAN_POINT('',(-3.22,7.,0.85));+#391=ORIENTED_EDGE('',*,*,#392,.T.);+#392=EDGE_CURVE('',#389,#73,#393,.T.);+#393=LINE('',#394,#255);+#394=CARTESIAN_POINT('',(-3.22,7.2,0.85));+#395=ORIENTED_EDGE('',*,*,#72,.F.);+#396=ADVANCED_FACE('',(#397),#416,.F.);+#397=FACE_BOUND('',#398,.F.);+#398=EDGE_LOOP('',(#399,#402,#407,#412,#414,#415));+#399=ORIENTED_EDGE('',*,*,#400,.F.);+#400=EDGE_CURVE('',#401,#389,#393,.T.);+#401=VERTEX_POINT('',#394);+#402=ORIENTED_EDGE('',*,*,#403,.T.);+#403=EDGE_CURVE('',#401,#404,#406,.T.);+#404=VERTEX_POINT('',#405);+#405=CARTESIAN_POINT('',(-2.78,7.2,0.85));+#406=LINE('',#394,#299);+#407=ORIENTED_EDGE('',*,*,#408,.T.);+#408=EDGE_CURVE('',#404,#409,#411,.T.);+#409=VERTEX_POINT('',#410);+#410=CARTESIAN_POINT('',(-2.78,7.,0.85));+#411=LINE('',#405,#255);+#412=ORIENTED_EDGE('',*,*,#413,.T.);+#413=EDGE_CURVE('',#409,#77,#411,.T.);+#414=ORIENTED_EDGE('',*,*,#76,.F.);+#415=ORIENTED_EDGE('',*,*,#392,.F.);+#416=PLANE('',#417);+#417=AXIS2_PLACEMENT_3D('',#394,#312,#256);+#418=ADVANCED_FACE('',(#419),#283,.F.);+#419=FACE_BOUND('',#420,.F.);+#420=EDGE_LOOP('',(#421,#422,#426,#430));+#421=ORIENTED_EDGE('',*,*,#413,.F.);+#422=ORIENTED_EDGE('',*,*,#423,.T.);+#423=EDGE_CURVE('',#409,#424,#250,.T.);+#424=VERTEX_POINT('',#425);+#425=CARTESIAN_POINT('',(-2.22,7.,0.85));+#426=ORIENTED_EDGE('',*,*,#427,.T.);+#427=EDGE_CURVE('',#424,#81,#428,.T.);+#428=LINE('',#429,#255);+#429=CARTESIAN_POINT('',(-2.22,7.2,0.85));+#430=ORIENTED_EDGE('',*,*,#80,.F.);+#431=ADVANCED_FACE('',(#432),#451,.F.);+#432=FACE_BOUND('',#433,.F.);+#433=EDGE_LOOP('',(#434,#437,#442,#447,#449,#450));+#434=ORIENTED_EDGE('',*,*,#435,.F.);+#435=EDGE_CURVE('',#436,#424,#428,.T.);+#436=VERTEX_POINT('',#429);+#437=ORIENTED_EDGE('',*,*,#438,.T.);+#438=EDGE_CURVE('',#436,#439,#441,.T.);+#439=VERTEX_POINT('',#440);+#440=CARTESIAN_POINT('',(-1.78,7.2,0.85));+#441=LINE('',#429,#299);+#442=ORIENTED_EDGE('',*,*,#443,.T.);+#443=EDGE_CURVE('',#439,#444,#446,.T.);+#444=VERTEX_POINT('',#445);+#445=CARTESIAN_POINT('',(-1.78,7.,0.85));+#446=LINE('',#440,#255);+#447=ORIENTED_EDGE('',*,*,#448,.T.);+#448=EDGE_CURVE('',#444,#85,#446,.T.);+#449=ORIENTED_EDGE('',*,*,#84,.F.);+#450=ORIENTED_EDGE('',*,*,#427,.F.);+#451=PLANE('',#452);+#452=AXIS2_PLACEMENT_3D('',#429,#312,#256);+#453=ADVANCED_FACE('',(#454),#283,.F.);+#454=FACE_BOUND('',#455,.F.);+#455=EDGE_LOOP('',(#456,#457,#461,#465));+#456=ORIENTED_EDGE('',*,*,#448,.F.);+#457=ORIENTED_EDGE('',*,*,#458,.T.);+#458=EDGE_CURVE('',#444,#459,#250,.T.);+#459=VERTEX_POINT('',#460);+#460=CARTESIAN_POINT('',(-1.22,7.,0.85));+#461=ORIENTED_EDGE('',*,*,#462,.T.);+#462=EDGE_CURVE('',#459,#89,#463,.T.);+#463=LINE('',#464,#255);+#464=CARTESIAN_POINT('',(-1.22,7.2,0.85));+#465=ORIENTED_EDGE('',*,*,#88,.F.);+#466=ADVANCED_FACE('',(#467),#486,.F.);+#467=FACE_BOUND('',#468,.F.);+#468=EDGE_LOOP('',(#469,#472,#477,#482,#484,#485));+#469=ORIENTED_EDGE('',*,*,#470,.F.);+#470=EDGE_CURVE('',#471,#459,#463,.T.);+#471=VERTEX_POINT('',#464);+#472=ORIENTED_EDGE('',*,*,#473,.T.);+#473=EDGE_CURVE('',#471,#474,#476,.T.);+#474=VERTEX_POINT('',#475);+#475=CARTESIAN_POINT('',(-0.78,7.2,0.85));+#476=LINE('',#464,#299);+#477=ORIENTED_EDGE('',*,*,#478,.T.);+#478=EDGE_CURVE('',#474,#479,#481,.T.);+#479=VERTEX_POINT('',#480);+#480=CARTESIAN_POINT('',(-0.78,7.,0.85));+#481=LINE('',#475,#255);+#482=ORIENTED_EDGE('',*,*,#483,.T.);+#483=EDGE_CURVE('',#479,#93,#481,.T.);+#484=ORIENTED_EDGE('',*,*,#92,.F.);+#485=ORIENTED_EDGE('',*,*,#462,.F.);+#486=PLANE('',#487);+#487=AXIS2_PLACEMENT_3D('',#464,#312,#256);+#488=ADVANCED_FACE('',(#489),#283,.F.);+#489=FACE_BOUND('',#490,.F.);+#490=EDGE_LOOP('',(#491,#492,#496,#500));+#491=ORIENTED_EDGE('',*,*,#483,.F.);+#492=ORIENTED_EDGE('',*,*,#493,.T.);+#493=EDGE_CURVE('',#479,#494,#250,.T.);+#494=VERTEX_POINT('',#495);+#495=CARTESIAN_POINT('',(-0.22,7.,0.85));+#496=ORIENTED_EDGE('',*,*,#497,.T.);+#497=EDGE_CURVE('',#494,#97,#498,.T.);+#498=LINE('',#499,#255);+#499=CARTESIAN_POINT('',(-0.22,7.2,0.85));+#500=ORIENTED_EDGE('',*,*,#96,.F.);+#501=ADVANCED_FACE('',(#502),#521,.F.);+#502=FACE_BOUND('',#503,.F.);+#503=EDGE_LOOP('',(#504,#507,#512,#517,#519,#520));+#504=ORIENTED_EDGE('',*,*,#505,.F.);+#505=EDGE_CURVE('',#506,#494,#498,.T.);+#506=VERTEX_POINT('',#499);+#507=ORIENTED_EDGE('',*,*,#508,.T.);+#508=EDGE_CURVE('',#506,#509,#511,.T.);+#509=VERTEX_POINT('',#510);+#510=CARTESIAN_POINT('',(0.22,7.2,0.85));+#511=LINE('',#499,#299);+#512=ORIENTED_EDGE('',*,*,#513,.T.);+#513=EDGE_CURVE('',#509,#514,#516,.T.);+#514=VERTEX_POINT('',#515);+#515=CARTESIAN_POINT('',(0.22,7.,0.85));+#516=LINE('',#510,#255);+#517=ORIENTED_EDGE('',*,*,#518,.T.);+#518=EDGE_CURVE('',#514,#101,#516,.T.);+#519=ORIENTED_EDGE('',*,*,#100,.F.);+#520=ORIENTED_EDGE('',*,*,#497,.F.);+#521=PLANE('',#522);+#522=AXIS2_PLACEMENT_3D('',#499,#312,#256);+#523=ADVANCED_FACE('',(#524),#283,.F.);+#524=FACE_BOUND('',#525,.F.);+#525=EDGE_LOOP('',(#526,#527,#531,#535));+#526=ORIENTED_EDGE('',*,*,#518,.F.);+#527=ORIENTED_EDGE('',*,*,#528,.T.);+#528=EDGE_CURVE('',#514,#529,#250,.T.);+#529=VERTEX_POINT('',#530);+#530=CARTESIAN_POINT('',(0.78,7.,0.85));+#531=ORIENTED_EDGE('',*,*,#532,.T.);+#532=EDGE_CURVE('',#529,#105,#533,.T.);+#533=LINE('',#534,#255);+#534=CARTESIAN_POINT('',(0.78,7.2,0.85));+#535=ORIENTED_EDGE('',*,*,#104,.F.);+#536=ADVANCED_FACE('',(#537),#556,.F.);+#537=FACE_BOUND('',#538,.F.);+#538=EDGE_LOOP('',(#539,#542,#547,#552,#554,#555));+#539=ORIENTED_EDGE('',*,*,#540,.F.);+#540=EDGE_CURVE('',#541,#529,#533,.T.);+#541=VERTEX_POINT('',#534);+#542=ORIENTED_EDGE('',*,*,#543,.T.);+#543=EDGE_CURVE('',#541,#544,#546,.T.);+#544=VERTEX_POINT('',#545);+#545=CARTESIAN_POINT('',(1.22,7.2,0.85));+#546=LINE('',#534,#299);+#547=ORIENTED_EDGE('',*,*,#548,.T.);+#548=EDGE_CURVE('',#544,#549,#551,.T.);+#549=VERTEX_POINT('',#550);+#550=CARTESIAN_POINT('',(1.22,7.,0.85));+#551=LINE('',#545,#255);+#552=ORIENTED_EDGE('',*,*,#553,.T.);+#553=EDGE_CURVE('',#549,#109,#551,.T.);+#554=ORIENTED_EDGE('',*,*,#108,.F.);+#555=ORIENTED_EDGE('',*,*,#532,.F.);+#556=PLANE('',#557);+#557=AXIS2_PLACEMENT_3D('',#534,#312,#256);+#558=ADVANCED_FACE('',(#559),#283,.F.);+#559=FACE_BOUND('',#560,.F.);+#560=EDGE_LOOP('',(#561,#562,#566,#570));+#561=ORIENTED_EDGE('',*,*,#553,.F.);+#562=ORIENTED_EDGE('',*,*,#563,.T.);+#563=EDGE_CURVE('',#549,#564,#250,.T.);+#564=VERTEX_POINT('',#565);+#565=CARTESIAN_POINT('',(1.78,7.,0.85));+#566=ORIENTED_EDGE('',*,*,#567,.T.);+#567=EDGE_CURVE('',#564,#113,#568,.T.);+#568=LINE('',#569,#255);+#569=CARTESIAN_POINT('',(1.78,7.2,0.85));+#570=ORIENTED_EDGE('',*,*,#112,.F.);+#571=ADVANCED_FACE('',(#572),#591,.F.);+#572=FACE_BOUND('',#573,.F.);+#573=EDGE_LOOP('',(#574,#577,#582,#587,#589,#590));+#574=ORIENTED_EDGE('',*,*,#575,.F.);+#575=EDGE_CURVE('',#576,#564,#568,.T.);+#576=VERTEX_POINT('',#569);+#577=ORIENTED_EDGE('',*,*,#578,.T.);+#578=EDGE_CURVE('',#576,#579,#581,.T.);+#579=VERTEX_POINT('',#580);+#580=CARTESIAN_POINT('',(2.22,7.2,0.85));+#581=LINE('',#569,#299);+#582=ORIENTED_EDGE('',*,*,#583,.T.);+#583=EDGE_CURVE('',#579,#584,#586,.T.);+#584=VERTEX_POINT('',#585);+#585=CARTESIAN_POINT('',(2.22,7.,0.85));+#586=LINE('',#580,#255);+#587=ORIENTED_EDGE('',*,*,#588,.T.);+#588=EDGE_CURVE('',#584,#117,#586,.T.);+#589=ORIENTED_EDGE('',*,*,#116,.F.);+#590=ORIENTED_EDGE('',*,*,#567,.F.);+#591=PLANE('',#592);+#592=AXIS2_PLACEMENT_3D('',#569,#312,#256);+#593=ADVANCED_FACE('',(#594),#283,.F.);+#594=FACE_BOUND('',#595,.F.);+#595=EDGE_LOOP('',(#596,#597,#601,#605));+#596=ORIENTED_EDGE('',*,*,#588,.F.);+#597=ORIENTED_EDGE('',*,*,#598,.T.);+#598=EDGE_CURVE('',#584,#599,#250,.T.);+#599=VERTEX_POINT('',#600);+#600=CARTESIAN_POINT('',(2.78,7.,0.85));+#601=ORIENTED_EDGE('',*,*,#602,.T.);+#602=EDGE_CURVE('',#599,#121,#603,.T.);+#603=LINE('',#604,#255);+#604=CARTESIAN_POINT('',(2.78,7.2,0.85));+#605=ORIENTED_EDGE('',*,*,#120,.F.);+#606=ADVANCED_FACE('',(#607),#626,.F.);+#607=FACE_BOUND('',#608,.F.);+#608=EDGE_LOOP('',(#609,#612,#617,#622,#624,#625));+#609=ORIENTED_EDGE('',*,*,#610,.F.);+#610=EDGE_CURVE('',#611,#599,#603,.T.);+#611=VERTEX_POINT('',#604);+#612=ORIENTED_EDGE('',*,*,#613,.T.);+#613=EDGE_CURVE('',#611,#614,#616,.T.);+#614=VERTEX_POINT('',#615);+#615=CARTESIAN_POINT('',(3.22,7.2,0.85));+#616=LINE('',#604,#299);+#617=ORIENTED_EDGE('',*,*,#618,.T.);+#618=EDGE_CURVE('',#614,#619,#621,.T.);+#619=VERTEX_POINT('',#620);+#620=CARTESIAN_POINT('',(3.22,7.,0.85));+#621=LINE('',#615,#255);+#622=ORIENTED_EDGE('',*,*,#623,.T.);+#623=EDGE_CURVE('',#619,#125,#621,.T.);+#624=ORIENTED_EDGE('',*,*,#124,.F.);+#625=ORIENTED_EDGE('',*,*,#602,.F.);+#626=PLANE('',#627);+#627=AXIS2_PLACEMENT_3D('',#604,#312,#256);+#628=ADVANCED_FACE('',(#629),#283,.F.);+#629=FACE_BOUND('',#630,.F.);+#630=EDGE_LOOP('',(#631,#632,#636,#640));+#631=ORIENTED_EDGE('',*,*,#623,.F.);+#632=ORIENTED_EDGE('',*,*,#633,.T.);+#633=EDGE_CURVE('',#619,#634,#250,.T.);+#634=VERTEX_POINT('',#635);+#635=CARTESIAN_POINT('',(3.78,7.,0.85));+#636=ORIENTED_EDGE('',*,*,#637,.T.);+#637=EDGE_CURVE('',#634,#129,#638,.T.);+#638=LINE('',#639,#255);+#639=CARTESIAN_POINT('',(3.78,7.2,0.85));+#640=ORIENTED_EDGE('',*,*,#128,.F.);+#641=ADVANCED_FACE('',(#642),#661,.F.);+#642=FACE_BOUND('',#643,.F.);+#643=EDGE_LOOP('',(#644,#647,#652,#657,#659,#660));+#644=ORIENTED_EDGE('',*,*,#645,.F.);+#645=EDGE_CURVE('',#646,#634,#638,.T.);+#646=VERTEX_POINT('',#639);+#647=ORIENTED_EDGE('',*,*,#648,.T.);+#648=EDGE_CURVE('',#646,#649,#651,.T.);+#649=VERTEX_POINT('',#650);+#650=CARTESIAN_POINT('',(4.22,7.2,0.85));+#651=LINE('',#639,#299);+#652=ORIENTED_EDGE('',*,*,#653,.T.);+#653=EDGE_CURVE('',#649,#654,#656,.T.);+#654=VERTEX_POINT('',#655);+#655=CARTESIAN_POINT('',(4.22,7.,0.85));+#656=LINE('',#650,#255);+#657=ORIENTED_EDGE('',*,*,#658,.T.);+#658=EDGE_CURVE('',#654,#133,#656,.T.);+#659=ORIENTED_EDGE('',*,*,#132,.F.);+#660=ORIENTED_EDGE('',*,*,#637,.F.);+#661=PLANE('',#662);+#662=AXIS2_PLACEMENT_3D('',#639,#312,#256);+#663=ADVANCED_FACE('',(#664),#283,.F.);+#664=FACE_BOUND('',#665,.F.);+#665=EDGE_LOOP('',(#666,#667,#671,#675));+#666=ORIENTED_EDGE('',*,*,#658,.F.);+#667=ORIENTED_EDGE('',*,*,#668,.T.);+#668=EDGE_CURVE('',#654,#669,#250,.T.);+#669=VERTEX_POINT('',#670);+#670=CARTESIAN_POINT('',(4.78,7.,0.85));+#671=ORIENTED_EDGE('',*,*,#672,.T.);+#672=EDGE_CURVE('',#669,#137,#673,.T.);+#673=LINE('',#674,#255);+#674=CARTESIAN_POINT('',(4.78,7.2,0.85));+#675=ORIENTED_EDGE('',*,*,#136,.F.);+#676=ADVANCED_FACE('',(#677),#696,.F.);+#677=FACE_BOUND('',#678,.F.);+#678=EDGE_LOOP('',(#679,#682,#687,#692,#694,#695));+#679=ORIENTED_EDGE('',*,*,#680,.F.);+#680=EDGE_CURVE('',#681,#669,#673,.T.);+#681=VERTEX_POINT('',#674);+#682=ORIENTED_EDGE('',*,*,#683,.T.);+#683=EDGE_CURVE('',#681,#684,#686,.T.);+#684=VERTEX_POINT('',#685);+#685=CARTESIAN_POINT('',(5.22,7.2,0.85));+#686=LINE('',#674,#299);+#687=ORIENTED_EDGE('',*,*,#688,.T.);+#688=EDGE_CURVE('',#684,#689,#691,.T.);+#689=VERTEX_POINT('',#690);+#690=CARTESIAN_POINT('',(5.22,7.,0.85));+#691=LINE('',#685,#255);+#692=ORIENTED_EDGE('',*,*,#693,.T.);+#693=EDGE_CURVE('',#689,#141,#691,.T.);+#694=ORIENTED_EDGE('',*,*,#140,.F.);+#695=ORIENTED_EDGE('',*,*,#672,.F.);+#696=PLANE('',#697);+#697=AXIS2_PLACEMENT_3D('',#674,#312,#256);+#698=ADVANCED_FACE('',(#699),#283,.F.);+#699=FACE_BOUND('',#700,.F.);+#700=EDGE_LOOP('',(#701,#702,#706,#710));+#701=ORIENTED_EDGE('',*,*,#693,.F.);+#702=ORIENTED_EDGE('',*,*,#703,.T.);+#703=EDGE_CURVE('',#689,#704,#250,.T.);+#704=VERTEX_POINT('',#705);+#705=CARTESIAN_POINT('',(5.78,7.,0.85));+#706=ORIENTED_EDGE('',*,*,#707,.T.);+#707=EDGE_CURVE('',#704,#145,#708,.T.);+#708=LINE('',#709,#255);+#709=CARTESIAN_POINT('',(5.78,7.2,0.85));+#710=ORIENTED_EDGE('',*,*,#144,.F.);+#711=ADVANCED_FACE('',(#712),#731,.F.);+#712=FACE_BOUND('',#713,.F.);+#713=EDGE_LOOP('',(#714,#717,#722,#727,#729,#730));+#714=ORIENTED_EDGE('',*,*,#715,.F.);+#715=EDGE_CURVE('',#716,#704,#708,.T.);+#716=VERTEX_POINT('',#709);+#717=ORIENTED_EDGE('',*,*,#718,.T.);+#718=EDGE_CURVE('',#716,#719,#721,.T.);+#719=VERTEX_POINT('',#720);+#720=CARTESIAN_POINT('',(6.22,7.2,0.85));+#721=LINE('',#709,#299);+#722=ORIENTED_EDGE('',*,*,#723,.T.);+#723=EDGE_CURVE('',#719,#724,#726,.T.);+#724=VERTEX_POINT('',#725);+#725=CARTESIAN_POINT('',(6.22,7.,0.85));+#726=LINE('',#720,#255);+#727=ORIENTED_EDGE('',*,*,#728,.T.);+#728=EDGE_CURVE('',#724,#149,#726,.T.);+#729=ORIENTED_EDGE('',*,*,#148,.F.);+#730=ORIENTED_EDGE('',*,*,#707,.F.);+#731=PLANE('',#732);+#732=AXIS2_PLACEMENT_3D('',#709,#312,#256);+#733=ADVANCED_FACE('',(#734),#283,.F.);+#734=FACE_BOUND('',#735,.F.);+#735=EDGE_LOOP('',(#736,#737,#741,#746,#753,#761,#764,#765));+#736=ORIENTED_EDGE('',*,*,#728,.F.);+#737=ORIENTED_EDGE('',*,*,#738,.T.);+#738=EDGE_CURVE('',#724,#739,#250,.T.);+#739=VERTEX_POINT('',#740);+#740=CARTESIAN_POINT('',(6.825,7.,0.85));+#741=ORIENTED_EDGE('',*,*,#742,.T.);+#742=EDGE_CURVE('',#739,#743,#745,.T.);+#743=VERTEX_POINT('',#744);+#744=CARTESIAN_POINT('',(7.,6.825,0.85));+#745=LINE('',#740,#177);+#746=ORIENTED_EDGE('',*,*,#747,.T.);+#747=EDGE_CURVE('',#743,#748,#750,.T.);+#748=VERTEX_POINT('',#749);+#749=CARTESIAN_POINT('',(7.,6.22,0.85));+#750=LINE('',#744,#751);+#751=VECTOR('',#752,1.);+#752=DIRECTION('',(1.110223024625E-16,-1.,0.));+#753=ORIENTED_EDGE('',*,*,#754,.T.);+#754=EDGE_CURVE('',#748,#755,#757,.T.);+#755=VERTEX_POINT('',#756);+#756=CARTESIAN_POINT('',(6.925,6.22,0.85));+#757=LINE('',#758,#759);+#758=CARTESIAN_POINT('',(7.2,6.22,0.85));+#759=VECTOR('',#760,1.);+#760=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#761=ORIENTED_EDGE('',*,*,#762,.F.);+#762=EDGE_CURVE('',#159,#755,#763,.T.);+#763=LINE('',#160,#751);+#764=ORIENTED_EDGE('',*,*,#175,.F.);+#765=ORIENTED_EDGE('',*,*,#152,.F.);+#766=ADVANCED_FACE('',(#767),#785,.F.);+#767=FACE_BOUND('',#768,.F.);+#768=EDGE_LOOP('',(#769,#770,#780,#784));+#769=ORIENTED_EDGE('',*,*,#39,.T.);+#770=ORIENTED_EDGE('',*,*,#771,.F.);+#771=EDGE_CURVE('',#772,#30,#774,.T.);+#772=VERTEX_POINT('',#773);+#773=CARTESIAN_POINT('',(-6.795256413291,6.722628206646,1.460395584541));+#774=B_SPLINE_CURVE_WITH_KNOTS('',2,(#775,#776,#777,#778,#779),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#775=CARTESIAN_POINT('',(-6.997865034984,6.519827987965,1.460996513181));+#776=CARTESIAN_POINT('',(-6.909596477286,6.608096545662,1.460996513181));+#777=CARTESIAN_POINT('',(-6.758846511474,6.758846511474,1.460996513181));+#778=CARTESIAN_POINT('',(-6.608096545662,6.909596477286,1.460996513181));+#779=CARTESIAN_POINT('',(-6.519827987965,6.997865034984,1.460996513181));+#780=ORIENTED_EDGE('',*,*,#781,.F.);+#781=EDGE_CURVE('',#260,#772,#782,.T.);+#782=B_SPLINE_CURVE_WITH_KNOTS('',1,(#261,#783),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#783=CARTESIAN_POINT('',(-6.786838234914,6.718419117457,1.5));+#784=ORIENTED_EDGE('',*,*,#259,.T.);+#785=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#261,#783),(#41,#43)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#786=ADVANCED_FACE('',(#787),#909,.F.);+#787=FACE_BOUND('',#788,.F.);+#788=EDGE_LOOP('',(#789,#797,#805,#806,#807,#811,#815,#819,#823,#827,#831,#835,#839,#843,#847,#851,#855,#859,#863,#867,#871,#875,#879,#883,#887,#891,#895,#899,#903,#907));+#789=ORIENTED_EDGE('',*,*,#790,.T.);+#790=EDGE_CURVE('',#791,#793,#795,.T.);+#791=VERTEX_POINT('',#792);+#792=CARTESIAN_POINT('',(6.925,-6.7875,0.85));+#793=VERTEX_POINT('',#794);+#794=CARTESIAN_POINT('',(6.795256413291,-6.722628206646,1.460395584541));+#795=B_SPLINE_CURVE_WITH_KNOTS('',1,(#792,#796),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#796=CARTESIAN_POINT('',(6.786838234914,-6.718419117457,1.5));+#797=ORIENTED_EDGE('',*,*,#798,.F.);+#798=EDGE_CURVE('',#161,#793,#799,.T.);+#799=B_SPLINE_CURVE_WITH_KNOTS('',2,(#800,#801,#802,#803,#804),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#800=CARTESIAN_POINT('',(6.795256413291,7.416775919098,1.460395584541));+#801=CARTESIAN_POINT('',(6.795256413291,7.087842119108,1.460395584541));+#802=CARTESIAN_POINT('',(6.795256413291,1.642603432527E-15,1.460395584541));+#803=CARTESIAN_POINT('',(6.795256413291,-7.087842119108,1.460395584541));+#804=CARTESIAN_POINT('',(6.795256413291,-7.416775919098,1.460395584541));+#805=ORIENTED_EDGE('',*,*,#158,.F.);+#806=ORIENTED_EDGE('',*,*,#762,.T.);+#807=ORIENTED_EDGE('',*,*,#808,.T.);+#808=EDGE_CURVE('',#755,#809,#763,.T.);+#809=VERTEX_POINT('',#810);+#810=CARTESIAN_POINT('',(6.925,5.78,0.85));+#811=ORIENTED_EDGE('',*,*,#812,.T.);+#812=EDGE_CURVE('',#809,#813,#763,.T.);+#813=VERTEX_POINT('',#814);+#814=CARTESIAN_POINT('',(6.925,5.22,0.85));+#815=ORIENTED_EDGE('',*,*,#816,.T.);+#816=EDGE_CURVE('',#813,#817,#763,.T.);+#817=VERTEX_POINT('',#818);+#818=CARTESIAN_POINT('',(6.925,4.78,0.85));+#819=ORIENTED_EDGE('',*,*,#820,.T.);+#820=EDGE_CURVE('',#817,#821,#763,.T.);+#821=VERTEX_POINT('',#822);+#822=CARTESIAN_POINT('',(6.925,4.22,0.85));+#823=ORIENTED_EDGE('',*,*,#824,.T.);+#824=EDGE_CURVE('',#821,#825,#763,.T.);+#825=VERTEX_POINT('',#826);+#826=CARTESIAN_POINT('',(6.925,3.78,0.85));+#827=ORIENTED_EDGE('',*,*,#828,.T.);+#828=EDGE_CURVE('',#825,#829,#763,.T.);+#829=VERTEX_POINT('',#830);+#830=CARTESIAN_POINT('',(6.925,3.22,0.85));+#831=ORIENTED_EDGE('',*,*,#832,.T.);+#832=EDGE_CURVE('',#829,#833,#763,.T.);+#833=VERTEX_POINT('',#834);+#834=CARTESIAN_POINT('',(6.925,2.78,0.85));+#835=ORIENTED_EDGE('',*,*,#836,.T.);+#836=EDGE_CURVE('',#833,#837,#763,.T.);+#837=VERTEX_POINT('',#838);+#838=CARTESIAN_POINT('',(6.925,2.22,0.85));+#839=ORIENTED_EDGE('',*,*,#840,.T.);+#840=EDGE_CURVE('',#837,#841,#763,.T.);+#841=VERTEX_POINT('',#842);+#842=CARTESIAN_POINT('',(6.925,1.78,0.85));+#843=ORIENTED_EDGE('',*,*,#844,.T.);+#844=EDGE_CURVE('',#841,#845,#763,.T.);+#845=VERTEX_POINT('',#846);+#846=CARTESIAN_POINT('',(6.925,1.22,0.85));+#847=ORIENTED_EDGE('',*,*,#848,.T.);+#848=EDGE_CURVE('',#845,#849,#763,.T.);+#849=VERTEX_POINT('',#850);+#850=CARTESIAN_POINT('',(6.925,0.78,0.85));+#851=ORIENTED_EDGE('',*,*,#852,.T.);+#852=EDGE_CURVE('',#849,#853,#763,.T.);+#853=VERTEX_POINT('',#854);+#854=CARTESIAN_POINT('',(6.925,0.22,0.85));+#855=ORIENTED_EDGE('',*,*,#856,.T.);+#856=EDGE_CURVE('',#853,#857,#763,.T.);+#857=VERTEX_POINT('',#858);+#858=CARTESIAN_POINT('',(6.925,-0.22,0.85));+#859=ORIENTED_EDGE('',*,*,#860,.T.);+#860=EDGE_CURVE('',#857,#861,#763,.T.);+#861=VERTEX_POINT('',#862);+#862=CARTESIAN_POINT('',(6.925,-0.78,0.85));+#863=ORIENTED_EDGE('',*,*,#864,.T.);+#864=EDGE_CURVE('',#861,#865,#763,.T.);+#865=VERTEX_POINT('',#866);+#866=CARTESIAN_POINT('',(6.925,-1.22,0.85));+#867=ORIENTED_EDGE('',*,*,#868,.T.);+#868=EDGE_CURVE('',#865,#869,#763,.T.);+#869=VERTEX_POINT('',#870);+#870=CARTESIAN_POINT('',(6.925,-1.78,0.85));+#871=ORIENTED_EDGE('',*,*,#872,.T.);+#872=EDGE_CURVE('',#869,#873,#763,.T.);+#873=VERTEX_POINT('',#874);+#874=CARTESIAN_POINT('',(6.925,-2.22,0.85));+#875=ORIENTED_EDGE('',*,*,#876,.T.);+#876=EDGE_CURVE('',#873,#877,#763,.T.);+#877=VERTEX_POINT('',#878);+#878=CARTESIAN_POINT('',(6.925,-2.78,0.85));+#879=ORIENTED_EDGE('',*,*,#880,.T.);+#880=EDGE_CURVE('',#877,#881,#763,.T.);+#881=VERTEX_POINT('',#882);+#882=CARTESIAN_POINT('',(6.925,-3.22,0.85));+#883=ORIENTED_EDGE('',*,*,#884,.T.);+#884=EDGE_CURVE('',#881,#885,#763,.T.);+#885=VERTEX_POINT('',#886);+#886=CARTESIAN_POINT('',(6.925,-3.78,0.85));+#887=ORIENTED_EDGE('',*,*,#888,.T.);+#888=EDGE_CURVE('',#885,#889,#763,.T.);+#889=VERTEX_POINT('',#890);+#890=CARTESIAN_POINT('',(6.925,-4.22,0.85));+#891=ORIENTED_EDGE('',*,*,#892,.T.);+#892=EDGE_CURVE('',#889,#893,#763,.T.);+#893=VERTEX_POINT('',#894);+#894=CARTESIAN_POINT('',(6.925,-4.78,0.85));+#895=ORIENTED_EDGE('',*,*,#896,.T.);+#896=EDGE_CURVE('',#893,#897,#763,.T.);+#897=VERTEX_POINT('',#898);+#898=CARTESIAN_POINT('',(6.925,-5.22,0.85));+#899=ORIENTED_EDGE('',*,*,#900,.T.);+#900=EDGE_CURVE('',#897,#901,#763,.T.);+#901=VERTEX_POINT('',#902);+#902=CARTESIAN_POINT('',(6.925,-5.78,0.85));+#903=ORIENTED_EDGE('',*,*,#904,.T.);+#904=EDGE_CURVE('',#901,#905,#763,.T.);+#905=VERTEX_POINT('',#906);+#906=CARTESIAN_POINT('',(6.925,-6.22,0.85));+#907=ORIENTED_EDGE('',*,*,#908,.T.);+#908=EDGE_CURVE('',#905,#791,#763,.T.);+#909=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#160,#164),(#792,#796)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#910=ADVANCED_FACE('',(#911),#936,.T.);+#911=FACE_BOUND('',#912,.T.);+#912=EDGE_LOOP('',(#913,#914,#924,#165));+#913=ORIENTED_EDGE('',*,*,#213,.T.);+#914=ORIENTED_EDGE('',*,*,#915,.T.);+#915=EDGE_CURVE('',#204,#916,#918,.T.);+#916=VERTEX_POINT('',#917);+#917=CARTESIAN_POINT('',(6.746349033255,6.702364620346,1.5));+#918=B_SPLINE_CURVE_WITH_KNOTS('',2,(#919,#920,#921,#922,#923),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#919=CARTESIAN_POINT('',(6.48533830329,6.96337535031,1.5));+#920=CARTESIAN_POINT('',(6.573606860988,6.875106792612,1.5));+#921=CARTESIAN_POINT('',(6.7243568268,6.7243568268,1.5));+#922=CARTESIAN_POINT('',(6.875106792612,6.573606860988,1.5));+#923=CARTESIAN_POINT('',(6.96337535031,6.48533830329,1.5));+#924=ORIENTED_EDGE('',*,*,#925,.F.);+#925=EDGE_CURVE('',#161,#916,#926,.T.);+#926=B_SPLINE_CURVE_WITH_KNOTS('',8,(#927,#928,#929,#930,#931,#932,#933,#934,#935),.UNSPECIFIED.,.F.,.F.,(9,9),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#927=CARTESIAN_POINT('',(6.795124813083,6.722568209866,1.460996513181));+#928=CARTESIAN_POINT('',(6.79340419061,6.721855504702,1.468628450826));+#929=CARTESIAN_POINT('',(6.790211350105,6.720532986862,1.476427534575));+#930=CARTESIAN_POINT('',(6.785339012166,6.718514798409,1.483943009306));+#931=CARTESIAN_POINT('',(6.778744741125,6.715783361905,1.490584376373));+#932=CARTESIAN_POINT('',(6.770804485247,6.712494400238,1.495536600978));+#933=CARTESIAN_POINT('',(6.762422617514,6.709022516939,1.498611518734));+#934=CARTESIAN_POINT('',(6.754138333162,6.70559105401,1.500000286476));+#935=CARTESIAN_POINT('',(6.746349033255,6.702364620345,1.5));+#936=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#168,#169,#170,#171,#172),(#937,#938,#939,#940,#941),(#919,#920,#921,#922,#923)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.176724109503),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#937=CARTESIAN_POINT('',(6.513610152676,6.991647199696,1.5));+#938=CARTESIAN_POINT('',(6.601878710374,6.903378641998,1.5));+#939=CARTESIAN_POINT('',(6.752628676186,6.752628676186,1.5));+#940=CARTESIAN_POINT('',(6.903378641998,6.601878710374,1.5));+#941=CARTESIAN_POINT('',(6.991647199696,6.513610152676,1.5));+#942=ADVANCED_FACE('',(#943),#973,.T.);+#943=FACE_BOUND('',#944,.T.);+#944=EDGE_LOOP('',(#945,#964,#972,#770));+#945=ORIENTED_EDGE('',*,*,#946,.T.);+#946=EDGE_CURVE('',#772,#947,#949,.T.);+#947=VERTEX_POINT('',#948);+#948=CARTESIAN_POINT('',(-6.746349033255,6.702364620346,1.5));+#949=B_SPLINE_CURVE_WITH_KNOTS('',7,(#950,#951,#952,#953,#954,#955,#956,#957,#958,#959,#960,#961,#962,#963),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290258418311,1.),.UNSPECIFIED.);+#950=CARTESIAN_POINT('',(-6.795124813083,6.722568209866,1.460996513181));+#951=CARTESIAN_POINT('',(-6.794554041325,6.722331788463,1.463528210014));+#952=CARTESIAN_POINT('',(-6.793818000186,6.72202691024,1.466078526174));+#953=CARTESIAN_POINT('',(-6.792908255625,6.721650081705,1.468630328774));+#954=CARTESIAN_POINT('',(-6.791819284084,6.721199014923,1.471163479521));+#955=CARTESIAN_POINT('',(-6.790549180415,6.720672920758,1.473656008071));+#956=CARTESIAN_POINT('',(-6.789100365813,6.720072802101,1.476085285382));+#957=CARTESIAN_POINT('',(-6.783518890952,6.717760879515,1.484160543614));+#958=CARTESIAN_POINT('',(-6.778533242358,6.715695756228,1.489381305737));+#959=CARTESIAN_POINT('',(-6.772629908592,6.713250515421,1.493773592534));+#960=CARTESIAN_POINT('',(-6.766076749535,6.71053610785,1.497032992821));+#961=CARTESIAN_POINT('',(-6.759316383726,6.707735872908,1.499067393954));+#962=CARTESIAN_POINT('',(-6.752667518062,6.704981822373,1.500000204988));+#963=CARTESIAN_POINT('',(-6.746349033255,6.702364620369,1.5));+#964=ORIENTED_EDGE('',*,*,#965,.T.);+#965=EDGE_CURVE('',#947,#185,#966,.T.);+#966=B_SPLINE_CURVE_WITH_KNOTS('',2,(#967,#968,#969,#970,#971),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#967=CARTESIAN_POINT('',(-6.96337535031,6.48533830329,1.5));+#968=CARTESIAN_POINT('',(-6.875106792612,6.573606860988,1.5));+#969=CARTESIAN_POINT('',(-6.7243568268,6.7243568268,1.5));+#970=CARTESIAN_POINT('',(-6.573606860988,6.875106792612,1.5));+#971=CARTESIAN_POINT('',(-6.48533830329,6.96337535031,1.5));+#972=ORIENTED_EDGE('',*,*,#184,.F.);+#973=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#775,#776,#777,#778,#779),(#974,#975,#976,#977,#978),(#967,#968,#969,#970,#971)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.176724109503),(-0.28964361549,-3.998243263537E-02,0.136741676868,0.386402859722),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#974=CARTESIAN_POINT('',(-6.991647199696,6.513610152676,1.5));+#975=CARTESIAN_POINT('',(-6.903378641998,6.601878710374,1.5));+#976=CARTESIAN_POINT('',(-6.752628676186,6.752628676186,1.5));+#977=CARTESIAN_POINT('',(-6.601878710374,6.903378641998,1.5));+#978=CARTESIAN_POINT('',(-6.513610152676,6.991647199696,1.5));+#979=ADVANCED_FACE('',(#980,#1033),#1043,.T.);+#980=FACE_BOUND('',#981,.T.);+#981=EDGE_LOOP('',(#982,#983,#984,#994,#1004,#1014,#1024,#1032));+#982=ORIENTED_EDGE('',*,*,#203,.F.);+#983=ORIENTED_EDGE('',*,*,#965,.F.);+#984=ORIENTED_EDGE('',*,*,#985,.F.);+#985=EDGE_CURVE('',#986,#947,#988,.T.);+#986=VERTEX_POINT('',#987);+#987=CARTESIAN_POINT('',(-6.746349033255,-6.702364620346,1.5));+#988=B_SPLINE_CURVE_WITH_KNOTS('',2,(#989,#990,#991,#992,#993),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#989=CARTESIAN_POINT('',(-6.746349033255,-7.416775919098,1.5));+#990=CARTESIAN_POINT('',(-6.746349033255,-7.087842119108,1.5));+#991=CARTESIAN_POINT('',(-6.746349033255,1.391832168124E-16,1.5));+#992=CARTESIAN_POINT('',(-6.746349033255,7.087842119108,1.5));+#993=CARTESIAN_POINT('',(-6.746349033255,7.416775919098,1.5));+#994=ORIENTED_EDGE('',*,*,#995,.F.);+#995=EDGE_CURVE('',#996,#986,#998,.T.);+#996=VERTEX_POINT('',#997);+#997=CARTESIAN_POINT('',(-6.702364620346,-6.746349033255,1.5));+#998=B_SPLINE_CURVE_WITH_KNOTS('',2,(#999,#1000,#1001,#1002,#1003),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#999=CARTESIAN_POINT('',(-6.48533830329,-6.96337535031,1.5));+#1000=CARTESIAN_POINT('',(-6.573606860988,-6.875106792612,1.5));+#1001=CARTESIAN_POINT('',(-6.7243568268,-6.7243568268,1.5));+#1002=CARTESIAN_POINT('',(-6.875106792612,-6.573606860988,1.5));+#1003=CARTESIAN_POINT('',(-6.96337535031,-6.48533830329,1.5));+#1004=ORIENTED_EDGE('',*,*,#1005,.F.);+#1005=EDGE_CURVE('',#1006,#996,#1008,.T.);+#1006=VERTEX_POINT('',#1007);+#1007=CARTESIAN_POINT('',(6.702364620346,-6.746349033255,1.5));+#1008=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1009,#1010,#1011,#1012,#1013),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165973E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#1009=CARTESIAN_POINT('',(7.416775919098,-6.746349033255,1.5));+#1010=CARTESIAN_POINT('',(7.087842119108,-6.746349033255,1.5));+#1011=CARTESIAN_POINT('',(-1.915540056213E-15,-6.746349033255,1.5));+#1012=CARTESIAN_POINT('',(-7.087842119108,-6.746349033255,1.5));+#1013=CARTESIAN_POINT('',(-7.416775919098,-6.746349033255,1.5));+#1014=ORIENTED_EDGE('',*,*,#1015,.F.);+#1015=EDGE_CURVE('',#1016,#1006,#1018,.T.);+#1016=VERTEX_POINT('',#1017);+#1017=CARTESIAN_POINT('',(6.746349033255,-6.702364620346,1.5));+#1018=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1019,#1020,#1021,#1022,#1023),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#1019=CARTESIAN_POINT('',(6.96337535031,-6.48533830329,1.5));+#1020=CARTESIAN_POINT('',(6.875106792612,-6.573606860988,1.5));+#1021=CARTESIAN_POINT('',(6.7243568268,-6.7243568268,1.5));+#1022=CARTESIAN_POINT('',(6.573606860988,-6.875106792612,1.5));+#1023=CARTESIAN_POINT('',(6.48533830329,-6.96337535031,1.5));+#1024=ORIENTED_EDGE('',*,*,#1025,.F.);+#1025=EDGE_CURVE('',#916,#1016,#1026,.T.);+#1026=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1027,#1028,#1029,#1030,#1031),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#1027=CARTESIAN_POINT('',(6.746349033255,7.416775919098,1.5));+#1028=CARTESIAN_POINT('',(6.746349033255,7.087842119108,1.5));+#1029=CARTESIAN_POINT('',(6.746349033255,1.637173622588E-15,1.5));+#1030=CARTESIAN_POINT('',(6.746349033255,-7.087842119108,1.5));+#1031=CARTESIAN_POINT('',(6.746349033255,-7.416775919098,1.5));+#1032=ORIENTED_EDGE('',*,*,#915,.F.);+#1033=FACE_BOUND('',#1034,.T.);+#1034=EDGE_LOOP('',(#1035));+#1035=ORIENTED_EDGE('',*,*,#1036,.T.);+#1036=EDGE_CURVE('',#1037,#1037,#1039,.T.);+#1037=VERTEX_POINT('',#1038);+#1038=CARTESIAN_POINT('',(-6.086838234914,5.836838234914,1.5));+#1039=CIRCLE('',#1040,0.25);+#1040=AXIS2_PLACEMENT_3D('',#1041,#1042,#752);+#1041=CARTESIAN_POINT('',(-6.086838234914,6.086838234914,1.5));+#1042=DIRECTION('',(0.,-0.,-1.));+#1043=PLANE('',#1044);+#1044=AXIS2_PLACEMENT_3D('',#43,#13,#1045);+#1045=DIRECTION('',(0.70351547258,-0.710679941915,0.));+#1046=ADVANCED_FACE('',(#1047),#1063,.F.);+#1047=FACE_BOUND('',#1048,.F.);+#1048=EDGE_LOOP('',(#1049,#1056,#1059,#1060));+#1049=ORIENTED_EDGE('',*,*,#1050,.T.);+#1050=EDGE_CURVE('',#1051,#1053,#1055,.T.);+#1051=VERTEX_POINT('',#1052);+#1052=CARTESIAN_POINT('',(-7.,6.825,0.75));+#1053=VERTEX_POINT('',#1054);+#1054=CARTESIAN_POINT('',(-6.825,7.,0.75));+#1055=LINE('',#1052,#244);+#1056=ORIENTED_EDGE('',*,*,#1057,.T.);+#1057=EDGE_CURVE('',#1053,#241,#1058,.T.);+#1058=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1054,#242),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1059=ORIENTED_EDGE('',*,*,#238,.F.);+#1060=ORIENTED_EDGE('',*,*,#1061,.F.);+#1061=EDGE_CURVE('',#1051,#239,#1062,.T.);+#1062=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1052,#240),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1063=PLANE('',#1064);+#1064=AXIS2_PLACEMENT_3D('',#240,#178,#245);+#1065=ADVANCED_FACE('',(#1066),#1081,.F.);+#1066=FACE_BOUND('',#1067,.F.);+#1067=EDGE_LOOP('',(#1068,#1075,#1079,#1080));+#1068=ORIENTED_EDGE('',*,*,#1069,.F.);+#1069=EDGE_CURVE('',#1070,#273,#1072,.T.);+#1070=VERTEX_POINT('',#1071);+#1071=CARTESIAN_POINT('',(-7.,6.22,0.75));+#1072=LINE('',#1073,#1074);+#1073=CARTESIAN_POINT('',(-7.,6.22,0.630119079428));+#1074=VECTOR('',#13,1.);+#1075=ORIENTED_EDGE('',*,*,#1076,.T.);+#1076=EDGE_CURVE('',#1070,#1051,#1077,.T.);+#1077=LINE('',#1078,#269);+#1078=CARTESIAN_POINT('',(-7.,-6.825,0.75));+#1079=ORIENTED_EDGE('',*,*,#1061,.T.);+#1080=ORIENTED_EDGE('',*,*,#280,.F.);+#1081=PLANE('',#1082);+#1082=AXIS2_PLACEMENT_3D('',#282,#50,#270);+#1083=ADVANCED_FACE('',(#1084),#1108,.F.);+#1084=FACE_BOUND('',#1085,.F.);+#1085=EDGE_LOOP('',(#1086,#1093,#1099,#1101,#1102,#1106));+#1086=ORIENTED_EDGE('',*,*,#1087,.F.);+#1087=EDGE_CURVE('',#1088,#1090,#1092,.T.);+#1088=VERTEX_POINT('',#1089);+#1089=CARTESIAN_POINT('',(-7.2,5.78,0.85));+#1090=VERTEX_POINT('',#1091);+#1091=CARTESIAN_POINT('',(-7.,5.78,0.85));+#1092=LINE('',#1089,#277);+#1093=ORIENTED_EDGE('',*,*,#1094,.T.);+#1094=EDGE_CURVE('',#1088,#1095,#1096,.T.);+#1095=VERTEX_POINT('',#276);+#1096=LINE('',#1089,#1097);+#1097=VECTOR('',#1098,1.);+#1098=DIRECTION('',(1.144237745222E-17,1.,0.));+#1099=ORIENTED_EDGE('',*,*,#1100,.T.);+#1100=EDGE_CURVE('',#1095,#273,#275,.T.);+#1101=ORIENTED_EDGE('',*,*,#272,.T.);+#1102=ORIENTED_EDGE('',*,*,#1103,.F.);+#1103=EDGE_CURVE('',#1104,#265,#267,.T.);+#1104=VERTEX_POINT('',#1105);+#1105=CARTESIAN_POINT('',(-6.925,5.78,0.85));+#1106=ORIENTED_EDGE('',*,*,#1107,.F.);+#1107=EDGE_CURVE('',#1090,#1104,#1092,.T.);+#1108=PLANE('',#1109);+#1109=AXIS2_PLACEMENT_3D('',#1089,#312,#278);+#1110=ADVANCED_FACE('',(#1111),#1229,.F.);+#1111=FACE_BOUND('',#1112,.F.);+#1112=EDGE_LOOP('',(#1113,#1114,#1124,#1129,#1133,#1137,#1141,#1145,#1149,#1153,#1157,#1161,#1165,#1169,#1173,#1177,#1181,#1185,#1189,#1193,#1197,#1201,#1205,#1209,#1213,#1217,#1221,#1225,#1227,#1228));+#1113=ORIENTED_EDGE('',*,*,#781,.T.);+#1114=ORIENTED_EDGE('',*,*,#1115,.F.);+#1115=EDGE_CURVE('',#1116,#772,#1118,.T.);+#1116=VERTEX_POINT('',#1117);+#1117=CARTESIAN_POINT('',(-6.795128681966,-6.722564340983,1.460996513181));+#1118=B_SPLINE_CURVE_WITH_KNOTS('',2,(#1119,#1120,#1121,#1122,#1123),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#1119=CARTESIAN_POINT('',(-6.795256413291,-7.416775919098,1.460395584541));+#1120=CARTESIAN_POINT('',(-6.795256413291,-7.087842119108,1.460395584541));+#1121=CARTESIAN_POINT('',(-6.795256413291,1.337534068733E-16,1.460395584541));+#1122=CARTESIAN_POINT('',(-6.795256413291,7.087842119108,1.460395584541));+#1123=CARTESIAN_POINT('',(-6.795256413291,7.416775919098,1.460395584541));+#1124=ORIENTED_EDGE('',*,*,#1125,.F.);+#1125=EDGE_CURVE('',#1126,#1116,#1127,.T.);+#1126=VERTEX_POINT('',#268);+#1127=B_SPLINE_CURVE_WITH_KNOTS('',1,(#268,#1128),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1128=CARTESIAN_POINT('',(-6.786838234914,-6.718419117457,1.5));+#1129=ORIENTED_EDGE('',*,*,#1130,.T.);+#1130=EDGE_CURVE('',#1126,#1131,#267,.T.);+#1131=VERTEX_POINT('',#1132);+#1132=CARTESIAN_POINT('',(-6.925,-6.22,0.85));+#1133=ORIENTED_EDGE('',*,*,#1134,.T.);+#1134=EDGE_CURVE('',#1131,#1135,#267,.T.);+#1135=VERTEX_POINT('',#1136);+#1136=CARTESIAN_POINT('',(-6.925,-5.78,0.85));+#1137=ORIENTED_EDGE('',*,*,#1138,.T.);+#1138=EDGE_CURVE('',#1135,#1139,#267,.T.);+#1139=VERTEX_POINT('',#1140);+#1140=CARTESIAN_POINT('',(-6.925,-5.22,0.85));+#1141=ORIENTED_EDGE('',*,*,#1142,.T.);+#1142=EDGE_CURVE('',#1139,#1143,#267,.T.);+#1143=VERTEX_POINT('',#1144);+#1144=CARTESIAN_POINT('',(-6.925,-4.78,0.85));+#1145=ORIENTED_EDGE('',*,*,#1146,.T.);+#1146=EDGE_CURVE('',#1143,#1147,#267,.T.);+#1147=VERTEX_POINT('',#1148);+#1148=CARTESIAN_POINT('',(-6.925,-4.22,0.85));+#1149=ORIENTED_EDGE('',*,*,#1150,.T.);+#1150=EDGE_CURVE('',#1147,#1151,#267,.T.);+#1151=VERTEX_POINT('',#1152);+#1152=CARTESIAN_POINT('',(-6.925,-3.78,0.85));+#1153=ORIENTED_EDGE('',*,*,#1154,.T.);+#1154=EDGE_CURVE('',#1151,#1155,#267,.T.);+#1155=VERTEX_POINT('',#1156);+#1156=CARTESIAN_POINT('',(-6.925,-3.22,0.85));+#1157=ORIENTED_EDGE('',*,*,#1158,.T.);+#1158=EDGE_CURVE('',#1155,#1159,#267,.T.);+#1159=VERTEX_POINT('',#1160);+#1160=CARTESIAN_POINT('',(-6.925,-2.78,0.85));+#1161=ORIENTED_EDGE('',*,*,#1162,.T.);+#1162=EDGE_CURVE('',#1159,#1163,#267,.T.);+#1163=VERTEX_POINT('',#1164);+#1164=CARTESIAN_POINT('',(-6.925,-2.22,0.85));+#1165=ORIENTED_EDGE('',*,*,#1166,.T.);+#1166=EDGE_CURVE('',#1163,#1167,#267,.T.);+#1167=VERTEX_POINT('',#1168);+#1168=CARTESIAN_POINT('',(-6.925,-1.78,0.85));+#1169=ORIENTED_EDGE('',*,*,#1170,.T.);+#1170=EDGE_CURVE('',#1167,#1171,#267,.T.);+#1171=VERTEX_POINT('',#1172);+#1172=CARTESIAN_POINT('',(-6.925,-1.22,0.85));+#1173=ORIENTED_EDGE('',*,*,#1174,.T.);+#1174=EDGE_CURVE('',#1171,#1175,#267,.T.);+#1175=VERTEX_POINT('',#1176);+#1176=CARTESIAN_POINT('',(-6.925,-0.78,0.85));+#1177=ORIENTED_EDGE('',*,*,#1178,.T.);+#1178=EDGE_CURVE('',#1175,#1179,#267,.T.);+#1179=VERTEX_POINT('',#1180);+#1180=CARTESIAN_POINT('',(-6.925,-0.22,0.85));+#1181=ORIENTED_EDGE('',*,*,#1182,.T.);+#1182=EDGE_CURVE('',#1179,#1183,#267,.T.);+#1183=VERTEX_POINT('',#1184);+#1184=CARTESIAN_POINT('',(-6.925,0.22,0.85));+#1185=ORIENTED_EDGE('',*,*,#1186,.T.);+#1186=EDGE_CURVE('',#1183,#1187,#267,.T.);+#1187=VERTEX_POINT('',#1188);+#1188=CARTESIAN_POINT('',(-6.925,0.78,0.85));+#1189=ORIENTED_EDGE('',*,*,#1190,.T.);+#1190=EDGE_CURVE('',#1187,#1191,#267,.T.);+#1191=VERTEX_POINT('',#1192);+#1192=CARTESIAN_POINT('',(-6.925,1.22,0.85));+#1193=ORIENTED_EDGE('',*,*,#1194,.T.);+#1194=EDGE_CURVE('',#1191,#1195,#267,.T.);+#1195=VERTEX_POINT('',#1196);+#1196=CARTESIAN_POINT('',(-6.925,1.78,0.85));+#1197=ORIENTED_EDGE('',*,*,#1198,.T.);+#1198=EDGE_CURVE('',#1195,#1199,#267,.T.);+#1199=VERTEX_POINT('',#1200);+#1200=CARTESIAN_POINT('',(-6.925,2.22,0.85));+#1201=ORIENTED_EDGE('',*,*,#1202,.T.);+#1202=EDGE_CURVE('',#1199,#1203,#267,.T.);+#1203=VERTEX_POINT('',#1204);+#1204=CARTESIAN_POINT('',(-6.925,2.78,0.85));+#1205=ORIENTED_EDGE('',*,*,#1206,.T.);+#1206=EDGE_CURVE('',#1203,#1207,#267,.T.);+#1207=VERTEX_POINT('',#1208);+#1208=CARTESIAN_POINT('',(-6.925,3.22,0.85));+#1209=ORIENTED_EDGE('',*,*,#1210,.T.);+#1210=EDGE_CURVE('',#1207,#1211,#267,.T.);+#1211=VERTEX_POINT('',#1212);+#1212=CARTESIAN_POINT('',(-6.925,3.78,0.85));+#1213=ORIENTED_EDGE('',*,*,#1214,.T.);+#1214=EDGE_CURVE('',#1211,#1215,#267,.T.);+#1215=VERTEX_POINT('',#1216);+#1216=CARTESIAN_POINT('',(-6.925,4.22,0.85));+#1217=ORIENTED_EDGE('',*,*,#1218,.T.);+#1218=EDGE_CURVE('',#1215,#1219,#267,.T.);+#1219=VERTEX_POINT('',#1220);+#1220=CARTESIAN_POINT('',(-6.925,4.78,0.85));+#1221=ORIENTED_EDGE('',*,*,#1222,.T.);+#1222=EDGE_CURVE('',#1219,#1223,#267,.T.);+#1223=VERTEX_POINT('',#1224);+#1224=CARTESIAN_POINT('',(-6.925,5.22,0.85));+#1225=ORIENTED_EDGE('',*,*,#1226,.T.);+#1226=EDGE_CURVE('',#1223,#1104,#267,.T.);+#1227=ORIENTED_EDGE('',*,*,#1103,.T.);+#1228=ORIENTED_EDGE('',*,*,#264,.T.);+#1229=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#268,#1128),(#261,#783)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1230=ADVANCED_FACE('',(#1231),#1244,.F.);+#1231=FACE_BOUND('',#1232,.F.);+#1232=EDGE_LOOP('',(#1233,#1234,#1239,#1243));+#1233=ORIENTED_EDGE('',*,*,#1057,.F.);+#1234=ORIENTED_EDGE('',*,*,#1235,.T.);+#1235=EDGE_CURVE('',#1053,#1236,#1238,.T.);+#1236=VERTEX_POINT('',#1237);+#1237=CARTESIAN_POINT('',(-6.22,7.,0.75));+#1238=LINE('',#1054,#49);+#1239=ORIENTED_EDGE('',*,*,#1240,.T.);+#1240=EDGE_CURVE('',#1236,#248,#1241,.T.);+#1241=LINE('',#1242,#1074);+#1242=CARTESIAN_POINT('',(-6.22,7.,0.630119079428));+#1243=ORIENTED_EDGE('',*,*,#247,.F.);+#1244=PLANE('',#1245);+#1245=AXIS2_PLACEMENT_3D('',#242,#752,#50);+#1246=ADVANCED_FACE('',(#1247),#1318,.F.);+#1247=FACE_BOUND('',#1248,.F.);+#1248=EDGE_LOOP('',(#1249,#1250,#1258,#1267,#1274,#1282,#1287,#1292,#1297,#1305,#1312,#1317));+#1249=ORIENTED_EDGE('',*,*,#1240,.F.);+#1250=ORIENTED_EDGE('',*,*,#1251,.T.);+#1251=EDGE_CURVE('',#1236,#1252,#1254,.T.);+#1252=VERTEX_POINT('',#1253);+#1253=CARTESIAN_POINT('',(-6.22,7.2,0.75));+#1254=LINE('',#1255,#1256);+#1255=CARTESIAN_POINT('',(-6.22,6.85,0.75));+#1256=VECTOR('',#1257,1.);+#1257=DIRECTION('',(0.,1.,0.));+#1258=ORIENTED_EDGE('',*,*,#1259,.T.);+#1259=EDGE_CURVE('',#1252,#1260,#1262,.T.);+#1260=VERTEX_POINT('',#1261);+#1261=CARTESIAN_POINT('',(-6.22,7.298480775301,0.667364817767));+#1262=CIRCLE('',#1263,0.1);+#1263=AXIS2_PLACEMENT_3D('',#1264,#1265,#1266);+#1264=CARTESIAN_POINT('',(-6.22,7.2,0.65));+#1265=DIRECTION('',(-1.,0.,0.));+#1266=DIRECTION('',(0.,-8.881784197001E-15,1.));+#1267=ORIENTED_EDGE('',*,*,#1268,.T.);+#1268=EDGE_CURVE('',#1260,#1269,#1271,.T.);+#1269=VERTEX_POINT('',#1270);+#1270=CARTESIAN_POINT('',(-6.22,7.382385590716,0.165270364467));+#1271=LINE('',#1261,#1272);+#1272=VECTOR('',#1273,1.);+#1273=DIRECTION('',(0.,0.16482406317,-0.986322983713));+#1274=ORIENTED_EDGE('',*,*,#1275,.T.);+#1275=EDGE_CURVE('',#1269,#1276,#1278,.T.);+#1276=VERTEX_POINT('',#1277);+#1277=CARTESIAN_POINT('',(-6.22,7.579347141319,1.387778780781E-16));+#1278=CIRCLE('',#1279,0.2);+#1279=AXIS2_PLACEMENT_3D('',#1280,#300,#1281);+#1280=CARTESIAN_POINT('',(-6.22,7.579347141319,0.2));+#1281=DIRECTION('',(0.,-0.984807753012,-0.173648177667));+#1282=ORIENTED_EDGE('',*,*,#1283,.T.);+#1283=EDGE_CURVE('',#1276,#1284,#1286,.T.);+#1284=VERTEX_POINT('',#1285);+#1285=CARTESIAN_POINT('',(-6.22,8.,1.387778780781E-16));+#1286=LINE('',#1277,#1256);+#1287=ORIENTED_EDGE('',*,*,#1288,.T.);+#1288=EDGE_CURVE('',#1284,#1289,#1291,.T.);+#1289=VERTEX_POINT('',#1290);+#1290=CARTESIAN_POINT('',(-6.22,8.,0.1));+#1291=LINE('',#1285,#1074);+#1292=ORIENTED_EDGE('',*,*,#1293,.T.);+#1293=EDGE_CURVE('',#1289,#1294,#1296,.T.);+#1294=VERTEX_POINT('',#1295);+#1295=CARTESIAN_POINT('',(-6.22,7.579347141319,0.1));+#1296=LINE('',#1290,#255);+#1297=ORIENTED_EDGE('',*,*,#1298,.T.);+#1298=EDGE_CURVE('',#1294,#1299,#1301,.T.);+#1299=VERTEX_POINT('',#1300);+#1300=CARTESIAN_POINT('',(-6.22,7.480866366018,0.182635182233));+#1301=CIRCLE('',#1302,1.E-01);+#1302=AXIS2_PLACEMENT_3D('',#1280,#1303,#1304);+#1303=DIRECTION('',(-1.,0.,-0.));+#1304=DIRECTION('',(0.,8.881784197001E-15,-1.));+#1305=ORIENTED_EDGE('',*,*,#1306,.T.);+#1306=EDGE_CURVE('',#1299,#1307,#1309,.T.);+#1307=VERTEX_POINT('',#1308);+#1308=CARTESIAN_POINT('',(-6.22,7.396961550602,0.684729635533));+#1309=LINE('',#1300,#1310);+#1310=VECTOR('',#1311,1.);+#1311=DIRECTION('',(0.,-0.16482406317,0.986322983713));+#1312=ORIENTED_EDGE('',*,*,#1313,.T.);+#1313=EDGE_CURVE('',#1307,#293,#1314,.T.);+#1314=CIRCLE('',#1315,0.2);+#1315=AXIS2_PLACEMENT_3D('',#1264,#14,#1316);+#1316=DIRECTION('',(0.,0.984807753012,0.173648177667));+#1317=ORIENTED_EDGE('',*,*,#292,.T.);+#1318=PLANE('',#1319);+#1319=AXIS2_PLACEMENT_3D('',#1320,#300,#13);+#1320=CARTESIAN_POINT('',(-6.22,7.414276639233,0.410238158856));+#1321=ADVANCED_FACE('',(#1322),#1385,.T.);+#1322=FACE_BOUND('',#1323,.T.);+#1323=EDGE_LOOP('',(#1324,#1330,#1336,#1343,#1348,#1355,#1360,#1365,#1370,#1376,#1381,#301));+#1324=ORIENTED_EDGE('',*,*,#1325,.F.);+#1325=EDGE_CURVE('',#1326,#303,#1328,.T.);+#1326=VERTEX_POINT('',#1327);+#1327=CARTESIAN_POINT('',(-5.78,7.,0.75));+#1328=LINE('',#1329,#1074);+#1329=CARTESIAN_POINT('',(-5.78,7.,0.630119079428));+#1330=ORIENTED_EDGE('',*,*,#1331,.T.);+#1331=EDGE_CURVE('',#1326,#1332,#1334,.T.);+#1332=VERTEX_POINT('',#1333);+#1333=CARTESIAN_POINT('',(-5.78,7.2,0.75));+#1334=LINE('',#1335,#1256);+#1335=CARTESIAN_POINT('',(-5.78,6.85,0.75));+#1336=ORIENTED_EDGE('',*,*,#1337,.T.);+#1337=EDGE_CURVE('',#1332,#1338,#1340,.T.);+#1338=VERTEX_POINT('',#1339);+#1339=CARTESIAN_POINT('',(-5.78,7.298480775301,0.667364817767));+#1340=CIRCLE('',#1341,0.1);+#1341=AXIS2_PLACEMENT_3D('',#1342,#1265,#1266);+#1342=CARTESIAN_POINT('',(-5.78,7.2,0.65));+#1343=ORIENTED_EDGE('',*,*,#1344,.T.);+#1344=EDGE_CURVE('',#1338,#1345,#1347,.T.);+#1345=VERTEX_POINT('',#1346);+#1346=CARTESIAN_POINT('',(-5.78,7.382385590716,0.165270364467));+#1347=LINE('',#1339,#1272);+#1348=ORIENTED_EDGE('',*,*,#1349,.T.);+#1349=EDGE_CURVE('',#1345,#1350,#1352,.T.);+#1350=VERTEX_POINT('',#1351);+#1351=CARTESIAN_POINT('',(-5.78,7.579347141319,1.387778780781E-16));+#1352=CIRCLE('',#1353,0.2);+#1353=AXIS2_PLACEMENT_3D('',#1354,#300,#1281);+#1354=CARTESIAN_POINT('',(-5.78,7.579347141319,0.2));+#1355=ORIENTED_EDGE('',*,*,#1356,.T.);+#1356=EDGE_CURVE('',#1350,#1357,#1359,.T.);+#1357=VERTEX_POINT('',#1358);+#1358=CARTESIAN_POINT('',(-5.78,8.,1.387778780781E-16));+#1359=LINE('',#1351,#1256);+#1360=ORIENTED_EDGE('',*,*,#1361,.T.);+#1361=EDGE_CURVE('',#1357,#1362,#1364,.T.);+#1362=VERTEX_POINT('',#1363);+#1363=CARTESIAN_POINT('',(-5.78,8.,0.1));+#1364=LINE('',#1358,#1074);+#1365=ORIENTED_EDGE('',*,*,#1366,.T.);+#1366=EDGE_CURVE('',#1362,#1367,#1369,.T.);+#1367=VERTEX_POINT('',#1368);+#1368=CARTESIAN_POINT('',(-5.78,7.579347141319,0.1));+#1369=LINE('',#1363,#255);+#1370=ORIENTED_EDGE('',*,*,#1371,.T.);+#1371=EDGE_CURVE('',#1367,#1372,#1374,.T.);+#1372=VERTEX_POINT('',#1373);+#1373=CARTESIAN_POINT('',(-5.78,7.480866366018,0.182635182233));+#1374=CIRCLE('',#1375,1.E-01);+#1375=AXIS2_PLACEMENT_3D('',#1354,#1303,#1304);+#1376=ORIENTED_EDGE('',*,*,#1377,.T.);+#1377=EDGE_CURVE('',#1372,#1378,#1380,.T.);+#1378=VERTEX_POINT('',#1379);+#1379=CARTESIAN_POINT('',(-5.78,7.396961550602,0.684729635533));+#1380=LINE('',#1373,#1310);+#1381=ORIENTED_EDGE('',*,*,#1382,.T.);+#1382=EDGE_CURVE('',#1378,#296,#1383,.T.);+#1383=CIRCLE('',#1384,0.2);+#1384=AXIS2_PLACEMENT_3D('',#1342,#14,#1316);+#1385=PLANE('',#1386);+#1386=AXIS2_PLACEMENT_3D('',#1387,#300,#13);+#1387=CARTESIAN_POINT('',(-5.78,7.414276639233,0.410238158856));+#1388=ADVANCED_FACE('',(#1389),#1396,.T.);+#1389=FACE_BOUND('',#1390,.F.);+#1390=EDGE_LOOP('',(#1391,#1381,#1394,#1395));+#1391=ORIENTED_EDGE('',*,*,#1392,.T.);+#1392=EDGE_CURVE('',#1307,#1378,#1393,.T.);+#1393=LINE('',#1308,#299);+#1394=ORIENTED_EDGE('',*,*,#295,.F.);+#1395=ORIENTED_EDGE('',*,*,#1313,.F.);+#1396=CYLINDRICAL_SURFACE('',#1397,0.2);+#1397=AXIS2_PLACEMENT_3D('',#1264,#1265,#1316);+#1398=ADVANCED_FACE('',(#1399),#1244,.F.);+#1399=FACE_BOUND('',#1400,.F.);+#1400=EDGE_LOOP('',(#1324,#1401,#1405,#1409));+#1401=ORIENTED_EDGE('',*,*,#1402,.T.);+#1402=EDGE_CURVE('',#1326,#1403,#1238,.T.);+#1403=VERTEX_POINT('',#1404);+#1404=CARTESIAN_POINT('',(-5.22,7.,0.75));+#1405=ORIENTED_EDGE('',*,*,#1406,.T.);+#1406=EDGE_CURVE('',#1403,#319,#1407,.T.);+#1407=LINE('',#1408,#1074);+#1408=CARTESIAN_POINT('',(-5.22,7.,0.630119079428));+#1409=ORIENTED_EDGE('',*,*,#318,.F.);+#1410=ADVANCED_FACE('',(#1411),#1470,.F.);+#1411=FACE_BOUND('',#1412,.F.);+#1412=EDGE_LOOP('',(#1413,#1414,#1420,#1427,#1432,#1439,#1444,#1449,#1454,#1460,#1465,#1469));+#1413=ORIENTED_EDGE('',*,*,#1406,.F.);+#1414=ORIENTED_EDGE('',*,*,#1415,.T.);+#1415=EDGE_CURVE('',#1403,#1416,#1418,.T.);+#1416=VERTEX_POINT('',#1417);+#1417=CARTESIAN_POINT('',(-5.22,7.2,0.75));+#1418=LINE('',#1419,#1256);+#1419=CARTESIAN_POINT('',(-5.22,6.85,0.75));+#1420=ORIENTED_EDGE('',*,*,#1421,.T.);+#1421=EDGE_CURVE('',#1416,#1422,#1424,.T.);+#1422=VERTEX_POINT('',#1423);+#1423=CARTESIAN_POINT('',(-5.22,7.298480775301,0.667364817767));+#1424=CIRCLE('',#1425,0.1);+#1425=AXIS2_PLACEMENT_3D('',#1426,#1265,#1266);+#1426=CARTESIAN_POINT('',(-5.22,7.2,0.65));+#1427=ORIENTED_EDGE('',*,*,#1428,.T.);+#1428=EDGE_CURVE('',#1422,#1429,#1431,.T.);+#1429=VERTEX_POINT('',#1430);+#1430=CARTESIAN_POINT('',(-5.22,7.382385590716,0.165270364467));+#1431=LINE('',#1423,#1272);+#1432=ORIENTED_EDGE('',*,*,#1433,.T.);+#1433=EDGE_CURVE('',#1429,#1434,#1436,.T.);+#1434=VERTEX_POINT('',#1435);+#1435=CARTESIAN_POINT('',(-5.22,7.579347141319,1.387778780781E-16));+#1436=CIRCLE('',#1437,0.2);+#1437=AXIS2_PLACEMENT_3D('',#1438,#300,#1281);+#1438=CARTESIAN_POINT('',(-5.22,7.579347141319,0.2));+#1439=ORIENTED_EDGE('',*,*,#1440,.T.);+#1440=EDGE_CURVE('',#1434,#1441,#1443,.T.);+#1441=VERTEX_POINT('',#1442);+#1442=CARTESIAN_POINT('',(-5.22,8.,1.387778780781E-16));+#1443=LINE('',#1435,#1256);+#1444=ORIENTED_EDGE('',*,*,#1445,.T.);+#1445=EDGE_CURVE('',#1441,#1446,#1448,.T.);+#1446=VERTEX_POINT('',#1447);+#1447=CARTESIAN_POINT('',(-5.22,8.,0.1));+#1448=LINE('',#1442,#1074);+#1449=ORIENTED_EDGE('',*,*,#1450,.T.);+#1450=EDGE_CURVE('',#1446,#1451,#1453,.T.);+#1451=VERTEX_POINT('',#1452);+#1452=CARTESIAN_POINT('',(-5.22,7.579347141319,0.1));+#1453=LINE('',#1447,#255);+#1454=ORIENTED_EDGE('',*,*,#1455,.T.);+#1455=EDGE_CURVE('',#1451,#1456,#1458,.T.);+#1456=VERTEX_POINT('',#1457);+#1457=CARTESIAN_POINT('',(-5.22,7.480866366018,0.182635182233));+#1458=CIRCLE('',#1459,1.E-01);+#1459=AXIS2_PLACEMENT_3D('',#1438,#1303,#1304);+#1460=ORIENTED_EDGE('',*,*,#1461,.T.);+#1461=EDGE_CURVE('',#1456,#1462,#1464,.T.);+#1462=VERTEX_POINT('',#1463);+#1463=CARTESIAN_POINT('',(-5.22,7.396961550602,0.684729635533));+#1464=LINE('',#1457,#1310);+#1465=ORIENTED_EDGE('',*,*,#1466,.T.);+#1466=EDGE_CURVE('',#1462,#331,#1467,.T.);+#1467=CIRCLE('',#1468,0.2);+#1468=AXIS2_PLACEMENT_3D('',#1426,#14,#1316);+#1469=ORIENTED_EDGE('',*,*,#330,.T.);+#1470=PLANE('',#1471);+#1471=AXIS2_PLACEMENT_3D('',#1472,#300,#13);+#1472=CARTESIAN_POINT('',(-5.22,7.414276639233,0.410238158856));+#1473=ADVANCED_FACE('',(#1474),#1537,.T.);+#1474=FACE_BOUND('',#1475,.T.);+#1475=EDGE_LOOP('',(#1476,#1482,#1488,#1495,#1500,#1507,#1512,#1517,#1522,#1528,#1533,#337));+#1476=ORIENTED_EDGE('',*,*,#1477,.F.);+#1477=EDGE_CURVE('',#1478,#339,#1480,.T.);+#1478=VERTEX_POINT('',#1479);+#1479=CARTESIAN_POINT('',(-4.78,7.,0.75));+#1480=LINE('',#1481,#1074);+#1481=CARTESIAN_POINT('',(-4.78,7.,0.630119079428));+#1482=ORIENTED_EDGE('',*,*,#1483,.T.);+#1483=EDGE_CURVE('',#1478,#1484,#1486,.T.);+#1484=VERTEX_POINT('',#1485);+#1485=CARTESIAN_POINT('',(-4.78,7.2,0.75));+#1486=LINE('',#1487,#1256);+#1487=CARTESIAN_POINT('',(-4.78,6.85,0.75));+#1488=ORIENTED_EDGE('',*,*,#1489,.T.);+#1489=EDGE_CURVE('',#1484,#1490,#1492,.T.);+#1490=VERTEX_POINT('',#1491);+#1491=CARTESIAN_POINT('',(-4.78,7.298480775301,0.667364817767));+#1492=CIRCLE('',#1493,0.1);+#1493=AXIS2_PLACEMENT_3D('',#1494,#1265,#1266);+#1494=CARTESIAN_POINT('',(-4.78,7.2,0.65));+#1495=ORIENTED_EDGE('',*,*,#1496,.T.);+#1496=EDGE_CURVE('',#1490,#1497,#1499,.T.);+#1497=VERTEX_POINT('',#1498);+#1498=CARTESIAN_POINT('',(-4.78,7.382385590716,0.165270364467));+#1499=LINE('',#1491,#1272);+#1500=ORIENTED_EDGE('',*,*,#1501,.T.);+#1501=EDGE_CURVE('',#1497,#1502,#1504,.T.);+#1502=VERTEX_POINT('',#1503);+#1503=CARTESIAN_POINT('',(-4.78,7.579347141319,1.387778780781E-16));+#1504=CIRCLE('',#1505,0.2);+#1505=AXIS2_PLACEMENT_3D('',#1506,#300,#1281);+#1506=CARTESIAN_POINT('',(-4.78,7.579347141319,0.2));+#1507=ORIENTED_EDGE('',*,*,#1508,.T.);+#1508=EDGE_CURVE('',#1502,#1509,#1511,.T.);+#1509=VERTEX_POINT('',#1510);+#1510=CARTESIAN_POINT('',(-4.78,8.,1.387778780781E-16));+#1511=LINE('',#1503,#1256);+#1512=ORIENTED_EDGE('',*,*,#1513,.T.);+#1513=EDGE_CURVE('',#1509,#1514,#1516,.T.);+#1514=VERTEX_POINT('',#1515);+#1515=CARTESIAN_POINT('',(-4.78,8.,0.1));+#1516=LINE('',#1510,#1074);+#1517=ORIENTED_EDGE('',*,*,#1518,.T.);+#1518=EDGE_CURVE('',#1514,#1519,#1521,.T.);+#1519=VERTEX_POINT('',#1520);+#1520=CARTESIAN_POINT('',(-4.78,7.579347141319,0.1));+#1521=LINE('',#1515,#255);+#1522=ORIENTED_EDGE('',*,*,#1523,.T.);+#1523=EDGE_CURVE('',#1519,#1524,#1526,.T.);+#1524=VERTEX_POINT('',#1525);+#1525=CARTESIAN_POINT('',(-4.78,7.480866366018,0.182635182233));+#1526=CIRCLE('',#1527,1.E-01);+#1527=AXIS2_PLACEMENT_3D('',#1506,#1303,#1304);+#1528=ORIENTED_EDGE('',*,*,#1529,.T.);+#1529=EDGE_CURVE('',#1524,#1530,#1532,.T.);+#1530=VERTEX_POINT('',#1531);+#1531=CARTESIAN_POINT('',(-4.78,7.396961550602,0.684729635533));+#1532=LINE('',#1525,#1310);+#1533=ORIENTED_EDGE('',*,*,#1534,.T.);+#1534=EDGE_CURVE('',#1530,#334,#1535,.T.);+#1535=CIRCLE('',#1536,0.2);+#1536=AXIS2_PLACEMENT_3D('',#1494,#14,#1316);+#1537=PLANE('',#1538);+#1538=AXIS2_PLACEMENT_3D('',#1539,#300,#13);+#1539=CARTESIAN_POINT('',(-4.78,7.414276639233,0.410238158856));+#1540=ADVANCED_FACE('',(#1541),#1548,.T.);+#1541=FACE_BOUND('',#1542,.F.);+#1542=EDGE_LOOP('',(#1543,#1533,#1546,#1547));+#1543=ORIENTED_EDGE('',*,*,#1544,.T.);+#1544=EDGE_CURVE('',#1462,#1530,#1545,.T.);+#1545=LINE('',#1463,#299);+#1546=ORIENTED_EDGE('',*,*,#333,.F.);+#1547=ORIENTED_EDGE('',*,*,#1466,.F.);+#1548=CYLINDRICAL_SURFACE('',#1549,0.2);+#1549=AXIS2_PLACEMENT_3D('',#1426,#1265,#1316);+#1550=ADVANCED_FACE('',(#1551),#1244,.F.);+#1551=FACE_BOUND('',#1552,.F.);+#1552=EDGE_LOOP('',(#1476,#1553,#1557,#1561));+#1553=ORIENTED_EDGE('',*,*,#1554,.T.);+#1554=EDGE_CURVE('',#1478,#1555,#1238,.T.);+#1555=VERTEX_POINT('',#1556);+#1556=CARTESIAN_POINT('',(-4.22,7.,0.75));+#1557=ORIENTED_EDGE('',*,*,#1558,.T.);+#1558=EDGE_CURVE('',#1555,#354,#1559,.T.);+#1559=LINE('',#1560,#1074);+#1560=CARTESIAN_POINT('',(-4.22,7.,0.630119079428));+#1561=ORIENTED_EDGE('',*,*,#353,.F.);+#1562=ADVANCED_FACE('',(#1563),#1622,.F.);+#1563=FACE_BOUND('',#1564,.F.);+#1564=EDGE_LOOP('',(#1565,#1566,#1572,#1579,#1584,#1591,#1596,#1601,#1606,#1612,#1617,#1621));+#1565=ORIENTED_EDGE('',*,*,#1558,.F.);+#1566=ORIENTED_EDGE('',*,*,#1567,.T.);+#1567=EDGE_CURVE('',#1555,#1568,#1570,.T.);+#1568=VERTEX_POINT('',#1569);+#1569=CARTESIAN_POINT('',(-4.22,7.2,0.75));+#1570=LINE('',#1571,#1256);+#1571=CARTESIAN_POINT('',(-4.22,6.85,0.75));+#1572=ORIENTED_EDGE('',*,*,#1573,.T.);+#1573=EDGE_CURVE('',#1568,#1574,#1576,.T.);+#1574=VERTEX_POINT('',#1575);+#1575=CARTESIAN_POINT('',(-4.22,7.298480775301,0.667364817767));+#1576=CIRCLE('',#1577,0.1);+#1577=AXIS2_PLACEMENT_3D('',#1578,#1265,#1266);+#1578=CARTESIAN_POINT('',(-4.22,7.2,0.65));+#1579=ORIENTED_EDGE('',*,*,#1580,.T.);+#1580=EDGE_CURVE('',#1574,#1581,#1583,.T.);+#1581=VERTEX_POINT('',#1582);+#1582=CARTESIAN_POINT('',(-4.22,7.382385590716,0.165270364467));+#1583=LINE('',#1575,#1272);+#1584=ORIENTED_EDGE('',*,*,#1585,.T.);+#1585=EDGE_CURVE('',#1581,#1586,#1588,.T.);+#1586=VERTEX_POINT('',#1587);+#1587=CARTESIAN_POINT('',(-4.22,7.579347141319,1.387778780781E-16));+#1588=CIRCLE('',#1589,0.2);+#1589=AXIS2_PLACEMENT_3D('',#1590,#300,#1281);+#1590=CARTESIAN_POINT('',(-4.22,7.579347141319,0.2));+#1591=ORIENTED_EDGE('',*,*,#1592,.T.);+#1592=EDGE_CURVE('',#1586,#1593,#1595,.T.);+#1593=VERTEX_POINT('',#1594);+#1594=CARTESIAN_POINT('',(-4.22,8.,1.387778780781E-16));+#1595=LINE('',#1587,#1256);+#1596=ORIENTED_EDGE('',*,*,#1597,.T.);+#1597=EDGE_CURVE('',#1593,#1598,#1600,.T.);+#1598=VERTEX_POINT('',#1599);+#1599=CARTESIAN_POINT('',(-4.22,8.,0.1));+#1600=LINE('',#1594,#1074);+#1601=ORIENTED_EDGE('',*,*,#1602,.T.);+#1602=EDGE_CURVE('',#1598,#1603,#1605,.T.);+#1603=VERTEX_POINT('',#1604);+#1604=CARTESIAN_POINT('',(-4.22,7.579347141319,0.1));+#1605=LINE('',#1599,#255);+#1606=ORIENTED_EDGE('',*,*,#1607,.T.);+#1607=EDGE_CURVE('',#1603,#1608,#1610,.T.);+#1608=VERTEX_POINT('',#1609);+#1609=CARTESIAN_POINT('',(-4.22,7.480866366018,0.182635182233));+#1610=CIRCLE('',#1611,1.E-01);+#1611=AXIS2_PLACEMENT_3D('',#1590,#1303,#1304);+#1612=ORIENTED_EDGE('',*,*,#1613,.T.);+#1613=EDGE_CURVE('',#1608,#1614,#1616,.T.);+#1614=VERTEX_POINT('',#1615);+#1615=CARTESIAN_POINT('',(-4.22,7.396961550602,0.684729635533));+#1616=LINE('',#1609,#1310);+#1617=ORIENTED_EDGE('',*,*,#1618,.T.);+#1618=EDGE_CURVE('',#1614,#366,#1619,.T.);+#1619=CIRCLE('',#1620,0.2);+#1620=AXIS2_PLACEMENT_3D('',#1578,#14,#1316);+#1621=ORIENTED_EDGE('',*,*,#365,.T.);+#1622=PLANE('',#1623);+#1623=AXIS2_PLACEMENT_3D('',#1624,#300,#13);+#1624=CARTESIAN_POINT('',(-4.22,7.414276639233,0.410238158856));+#1625=ADVANCED_FACE('',(#1626),#1689,.T.);+#1626=FACE_BOUND('',#1627,.T.);+#1627=EDGE_LOOP('',(#1628,#1634,#1640,#1647,#1652,#1659,#1664,#1669,#1674,#1680,#1685,#372));+#1628=ORIENTED_EDGE('',*,*,#1629,.F.);+#1629=EDGE_CURVE('',#1630,#374,#1632,.T.);+#1630=VERTEX_POINT('',#1631);+#1631=CARTESIAN_POINT('',(-3.78,7.,0.75));+#1632=LINE('',#1633,#1074);+#1633=CARTESIAN_POINT('',(-3.78,7.,0.630119079428));+#1634=ORIENTED_EDGE('',*,*,#1635,.T.);+#1635=EDGE_CURVE('',#1630,#1636,#1638,.T.);+#1636=VERTEX_POINT('',#1637);+#1637=CARTESIAN_POINT('',(-3.78,7.2,0.75));+#1638=LINE('',#1639,#1256);+#1639=CARTESIAN_POINT('',(-3.78,6.85,0.75));+#1640=ORIENTED_EDGE('',*,*,#1641,.T.);+#1641=EDGE_CURVE('',#1636,#1642,#1644,.T.);+#1642=VERTEX_POINT('',#1643);+#1643=CARTESIAN_POINT('',(-3.78,7.298480775301,0.667364817767));+#1644=CIRCLE('',#1645,0.1);+#1645=AXIS2_PLACEMENT_3D('',#1646,#1265,#1266);+#1646=CARTESIAN_POINT('',(-3.78,7.2,0.65));+#1647=ORIENTED_EDGE('',*,*,#1648,.T.);+#1648=EDGE_CURVE('',#1642,#1649,#1651,.T.);+#1649=VERTEX_POINT('',#1650);+#1650=CARTESIAN_POINT('',(-3.78,7.382385590716,0.165270364467));+#1651=LINE('',#1643,#1272);+#1652=ORIENTED_EDGE('',*,*,#1653,.T.);+#1653=EDGE_CURVE('',#1649,#1654,#1656,.T.);+#1654=VERTEX_POINT('',#1655);+#1655=CARTESIAN_POINT('',(-3.78,7.579347141319,1.387778780781E-16));+#1656=CIRCLE('',#1657,0.2);+#1657=AXIS2_PLACEMENT_3D('',#1658,#300,#1281);+#1658=CARTESIAN_POINT('',(-3.78,7.579347141319,0.2));+#1659=ORIENTED_EDGE('',*,*,#1660,.T.);+#1660=EDGE_CURVE('',#1654,#1661,#1663,.T.);+#1661=VERTEX_POINT('',#1662);+#1662=CARTESIAN_POINT('',(-3.78,8.,1.387778780781E-16));+#1663=LINE('',#1655,#1256);+#1664=ORIENTED_EDGE('',*,*,#1665,.T.);+#1665=EDGE_CURVE('',#1661,#1666,#1668,.T.);+#1666=VERTEX_POINT('',#1667);+#1667=CARTESIAN_POINT('',(-3.78,8.,0.1));+#1668=LINE('',#1662,#1074);+#1669=ORIENTED_EDGE('',*,*,#1670,.T.);+#1670=EDGE_CURVE('',#1666,#1671,#1673,.T.);+#1671=VERTEX_POINT('',#1672);+#1672=CARTESIAN_POINT('',(-3.78,7.579347141319,0.1));+#1673=LINE('',#1667,#255);+#1674=ORIENTED_EDGE('',*,*,#1675,.T.);+#1675=EDGE_CURVE('',#1671,#1676,#1678,.T.);+#1676=VERTEX_POINT('',#1677);+#1677=CARTESIAN_POINT('',(-3.78,7.480866366018,0.182635182233));+#1678=CIRCLE('',#1679,1.E-01);+#1679=AXIS2_PLACEMENT_3D('',#1658,#1303,#1304);+#1680=ORIENTED_EDGE('',*,*,#1681,.T.);+#1681=EDGE_CURVE('',#1676,#1682,#1684,.T.);+#1682=VERTEX_POINT('',#1683);+#1683=CARTESIAN_POINT('',(-3.78,7.396961550602,0.684729635533));+#1684=LINE('',#1677,#1310);+#1685=ORIENTED_EDGE('',*,*,#1686,.T.);+#1686=EDGE_CURVE('',#1682,#369,#1687,.T.);+#1687=CIRCLE('',#1688,0.2);+#1688=AXIS2_PLACEMENT_3D('',#1646,#14,#1316);+#1689=PLANE('',#1690);+#1690=AXIS2_PLACEMENT_3D('',#1691,#300,#13);+#1691=CARTESIAN_POINT('',(-3.78,7.414276639233,0.410238158856));+#1692=ADVANCED_FACE('',(#1693),#1700,.T.);+#1693=FACE_BOUND('',#1694,.F.);+#1694=EDGE_LOOP('',(#1695,#1685,#1698,#1699));+#1695=ORIENTED_EDGE('',*,*,#1696,.T.);+#1696=EDGE_CURVE('',#1614,#1682,#1697,.T.);+#1697=LINE('',#1615,#299);+#1698=ORIENTED_EDGE('',*,*,#368,.F.);+#1699=ORIENTED_EDGE('',*,*,#1618,.F.);+#1700=CYLINDRICAL_SURFACE('',#1701,0.2);+#1701=AXIS2_PLACEMENT_3D('',#1578,#1265,#1316);+#1702=ADVANCED_FACE('',(#1703),#1244,.F.);+#1703=FACE_BOUND('',#1704,.F.);+#1704=EDGE_LOOP('',(#1628,#1705,#1709,#1713));+#1705=ORIENTED_EDGE('',*,*,#1706,.T.);+#1706=EDGE_CURVE('',#1630,#1707,#1238,.T.);+#1707=VERTEX_POINT('',#1708);+#1708=CARTESIAN_POINT('',(-3.22,7.,0.75));+#1709=ORIENTED_EDGE('',*,*,#1710,.T.);+#1710=EDGE_CURVE('',#1707,#389,#1711,.T.);+#1711=LINE('',#1712,#1074);+#1712=CARTESIAN_POINT('',(-3.22,7.,0.630119079428));+#1713=ORIENTED_EDGE('',*,*,#388,.F.);+#1714=ADVANCED_FACE('',(#1715),#1774,.F.);+#1715=FACE_BOUND('',#1716,.F.);+#1716=EDGE_LOOP('',(#1717,#1718,#1724,#1731,#1736,#1743,#1748,#1753,#1758,#1764,#1769,#1773));+#1717=ORIENTED_EDGE('',*,*,#1710,.F.);+#1718=ORIENTED_EDGE('',*,*,#1719,.T.);+#1719=EDGE_CURVE('',#1707,#1720,#1722,.T.);+#1720=VERTEX_POINT('',#1721);+#1721=CARTESIAN_POINT('',(-3.22,7.2,0.75));+#1722=LINE('',#1723,#1256);+#1723=CARTESIAN_POINT('',(-3.22,6.85,0.75));+#1724=ORIENTED_EDGE('',*,*,#1725,.T.);+#1725=EDGE_CURVE('',#1720,#1726,#1728,.T.);+#1726=VERTEX_POINT('',#1727);+#1727=CARTESIAN_POINT('',(-3.22,7.298480775301,0.667364817767));+#1728=CIRCLE('',#1729,0.1);+#1729=AXIS2_PLACEMENT_3D('',#1730,#1265,#1266);+#1730=CARTESIAN_POINT('',(-3.22,7.2,0.65));+#1731=ORIENTED_EDGE('',*,*,#1732,.T.);+#1732=EDGE_CURVE('',#1726,#1733,#1735,.T.);+#1733=VERTEX_POINT('',#1734);+#1734=CARTESIAN_POINT('',(-3.22,7.382385590716,0.165270364467));+#1735=LINE('',#1727,#1272);+#1736=ORIENTED_EDGE('',*,*,#1737,.T.);+#1737=EDGE_CURVE('',#1733,#1738,#1740,.T.);+#1738=VERTEX_POINT('',#1739);+#1739=CARTESIAN_POINT('',(-3.22,7.579347141319,1.387778780781E-16));+#1740=CIRCLE('',#1741,0.2);+#1741=AXIS2_PLACEMENT_3D('',#1742,#300,#1281);+#1742=CARTESIAN_POINT('',(-3.22,7.579347141319,0.2));+#1743=ORIENTED_EDGE('',*,*,#1744,.T.);+#1744=EDGE_CURVE('',#1738,#1745,#1747,.T.);+#1745=VERTEX_POINT('',#1746);+#1746=CARTESIAN_POINT('',(-3.22,8.,1.387778780781E-16));+#1747=LINE('',#1739,#1256);+#1748=ORIENTED_EDGE('',*,*,#1749,.T.);+#1749=EDGE_CURVE('',#1745,#1750,#1752,.T.);+#1750=VERTEX_POINT('',#1751);+#1751=CARTESIAN_POINT('',(-3.22,8.,0.1));+#1752=LINE('',#1746,#1074);+#1753=ORIENTED_EDGE('',*,*,#1754,.T.);+#1754=EDGE_CURVE('',#1750,#1755,#1757,.T.);+#1755=VERTEX_POINT('',#1756);+#1756=CARTESIAN_POINT('',(-3.22,7.579347141319,0.1));+#1757=LINE('',#1751,#255);+#1758=ORIENTED_EDGE('',*,*,#1759,.T.);+#1759=EDGE_CURVE('',#1755,#1760,#1762,.T.);+#1760=VERTEX_POINT('',#1761);+#1761=CARTESIAN_POINT('',(-3.22,7.480866366018,0.182635182233));+#1762=CIRCLE('',#1763,1.E-01);+#1763=AXIS2_PLACEMENT_3D('',#1742,#1303,#1304);+#1764=ORIENTED_EDGE('',*,*,#1765,.T.);+#1765=EDGE_CURVE('',#1760,#1766,#1768,.T.);+#1766=VERTEX_POINT('',#1767);+#1767=CARTESIAN_POINT('',(-3.22,7.396961550602,0.684729635533));+#1768=LINE('',#1761,#1310);+#1769=ORIENTED_EDGE('',*,*,#1770,.T.);+#1770=EDGE_CURVE('',#1766,#401,#1771,.T.);+#1771=CIRCLE('',#1772,0.2);+#1772=AXIS2_PLACEMENT_3D('',#1730,#14,#1316);+#1773=ORIENTED_EDGE('',*,*,#400,.T.);+#1774=PLANE('',#1775);+#1775=AXIS2_PLACEMENT_3D('',#1776,#300,#13);+#1776=CARTESIAN_POINT('',(-3.22,7.414276639233,0.410238158856));+#1777=ADVANCED_FACE('',(#1778),#1841,.T.);+#1778=FACE_BOUND('',#1779,.T.);+#1779=EDGE_LOOP('',(#1780,#1786,#1792,#1799,#1804,#1811,#1816,#1821,#1826,#1832,#1837,#407));+#1780=ORIENTED_EDGE('',*,*,#1781,.F.);+#1781=EDGE_CURVE('',#1782,#409,#1784,.T.);+#1782=VERTEX_POINT('',#1783);+#1783=CARTESIAN_POINT('',(-2.78,7.,0.75));+#1784=LINE('',#1785,#1074);+#1785=CARTESIAN_POINT('',(-2.78,7.,0.630119079428));+#1786=ORIENTED_EDGE('',*,*,#1787,.T.);+#1787=EDGE_CURVE('',#1782,#1788,#1790,.T.);+#1788=VERTEX_POINT('',#1789);+#1789=CARTESIAN_POINT('',(-2.78,7.2,0.75));+#1790=LINE('',#1791,#1256);+#1791=CARTESIAN_POINT('',(-2.78,6.85,0.75));+#1792=ORIENTED_EDGE('',*,*,#1793,.T.);+#1793=EDGE_CURVE('',#1788,#1794,#1796,.T.);+#1794=VERTEX_POINT('',#1795);+#1795=CARTESIAN_POINT('',(-2.78,7.298480775301,0.667364817767));+#1796=CIRCLE('',#1797,0.1);+#1797=AXIS2_PLACEMENT_3D('',#1798,#1265,#1266);+#1798=CARTESIAN_POINT('',(-2.78,7.2,0.65));+#1799=ORIENTED_EDGE('',*,*,#1800,.T.);+#1800=EDGE_CURVE('',#1794,#1801,#1803,.T.);+#1801=VERTEX_POINT('',#1802);+#1802=CARTESIAN_POINT('',(-2.78,7.382385590716,0.165270364467));+#1803=LINE('',#1795,#1272);+#1804=ORIENTED_EDGE('',*,*,#1805,.T.);+#1805=EDGE_CURVE('',#1801,#1806,#1808,.T.);+#1806=VERTEX_POINT('',#1807);+#1807=CARTESIAN_POINT('',(-2.78,7.579347141319,1.387778780781E-16));+#1808=CIRCLE('',#1809,0.2);+#1809=AXIS2_PLACEMENT_3D('',#1810,#300,#1281);+#1810=CARTESIAN_POINT('',(-2.78,7.579347141319,0.2));+#1811=ORIENTED_EDGE('',*,*,#1812,.T.);+#1812=EDGE_CURVE('',#1806,#1813,#1815,.T.);+#1813=VERTEX_POINT('',#1814);+#1814=CARTESIAN_POINT('',(-2.78,8.,1.387778780781E-16));+#1815=LINE('',#1807,#1256);+#1816=ORIENTED_EDGE('',*,*,#1817,.T.);+#1817=EDGE_CURVE('',#1813,#1818,#1820,.T.);+#1818=VERTEX_POINT('',#1819);+#1819=CARTESIAN_POINT('',(-2.78,8.,0.1));+#1820=LINE('',#1814,#1074);+#1821=ORIENTED_EDGE('',*,*,#1822,.T.);+#1822=EDGE_CURVE('',#1818,#1823,#1825,.T.);+#1823=VERTEX_POINT('',#1824);+#1824=CARTESIAN_POINT('',(-2.78,7.579347141319,0.1));+#1825=LINE('',#1819,#255);+#1826=ORIENTED_EDGE('',*,*,#1827,.T.);+#1827=EDGE_CURVE('',#1823,#1828,#1830,.T.);+#1828=VERTEX_POINT('',#1829);+#1829=CARTESIAN_POINT('',(-2.78,7.480866366018,0.182635182233));+#1830=CIRCLE('',#1831,1.E-01);+#1831=AXIS2_PLACEMENT_3D('',#1810,#1303,#1304);+#1832=ORIENTED_EDGE('',*,*,#1833,.T.);+#1833=EDGE_CURVE('',#1828,#1834,#1836,.T.);+#1834=VERTEX_POINT('',#1835);+#1835=CARTESIAN_POINT('',(-2.78,7.396961550602,0.684729635533));+#1836=LINE('',#1829,#1310);+#1837=ORIENTED_EDGE('',*,*,#1838,.T.);+#1838=EDGE_CURVE('',#1834,#404,#1839,.T.);+#1839=CIRCLE('',#1840,0.2);+#1840=AXIS2_PLACEMENT_3D('',#1798,#14,#1316);+#1841=PLANE('',#1842);+#1842=AXIS2_PLACEMENT_3D('',#1843,#300,#13);+#1843=CARTESIAN_POINT('',(-2.78,7.414276639233,0.410238158856));+#1844=ADVANCED_FACE('',(#1845),#1852,.T.);+#1845=FACE_BOUND('',#1846,.F.);+#1846=EDGE_LOOP('',(#1847,#1837,#1850,#1851));+#1847=ORIENTED_EDGE('',*,*,#1848,.T.);+#1848=EDGE_CURVE('',#1766,#1834,#1849,.T.);+#1849=LINE('',#1767,#299);+#1850=ORIENTED_EDGE('',*,*,#403,.F.);+#1851=ORIENTED_EDGE('',*,*,#1770,.F.);+#1852=CYLINDRICAL_SURFACE('',#1853,0.2);+#1853=AXIS2_PLACEMENT_3D('',#1730,#1265,#1316);+#1854=ADVANCED_FACE('',(#1855),#1244,.F.);+#1855=FACE_BOUND('',#1856,.F.);+#1856=EDGE_LOOP('',(#1780,#1857,#1861,#1865));+#1857=ORIENTED_EDGE('',*,*,#1858,.T.);+#1858=EDGE_CURVE('',#1782,#1859,#1238,.T.);+#1859=VERTEX_POINT('',#1860);+#1860=CARTESIAN_POINT('',(-2.22,7.,0.75));+#1861=ORIENTED_EDGE('',*,*,#1862,.T.);+#1862=EDGE_CURVE('',#1859,#424,#1863,.T.);+#1863=LINE('',#1864,#1074);+#1864=CARTESIAN_POINT('',(-2.22,7.,0.630119079428));+#1865=ORIENTED_EDGE('',*,*,#423,.F.);+#1866=ADVANCED_FACE('',(#1867),#1926,.F.);+#1867=FACE_BOUND('',#1868,.F.);+#1868=EDGE_LOOP('',(#1869,#1870,#1876,#1883,#1888,#1895,#1900,#1905,#1910,#1916,#1921,#1925));+#1869=ORIENTED_EDGE('',*,*,#1862,.F.);+#1870=ORIENTED_EDGE('',*,*,#1871,.T.);+#1871=EDGE_CURVE('',#1859,#1872,#1874,.T.);+#1872=VERTEX_POINT('',#1873);+#1873=CARTESIAN_POINT('',(-2.22,7.2,0.75));+#1874=LINE('',#1875,#1256);+#1875=CARTESIAN_POINT('',(-2.22,6.85,0.75));+#1876=ORIENTED_EDGE('',*,*,#1877,.T.);+#1877=EDGE_CURVE('',#1872,#1878,#1880,.T.);+#1878=VERTEX_POINT('',#1879);+#1879=CARTESIAN_POINT('',(-2.22,7.298480775301,0.667364817767));+#1880=CIRCLE('',#1881,0.1);+#1881=AXIS2_PLACEMENT_3D('',#1882,#1265,#1266);+#1882=CARTESIAN_POINT('',(-2.22,7.2,0.65));+#1883=ORIENTED_EDGE('',*,*,#1884,.T.);+#1884=EDGE_CURVE('',#1878,#1885,#1887,.T.);+#1885=VERTEX_POINT('',#1886);+#1886=CARTESIAN_POINT('',(-2.22,7.382385590716,0.165270364467));+#1887=LINE('',#1879,#1272);+#1888=ORIENTED_EDGE('',*,*,#1889,.T.);+#1889=EDGE_CURVE('',#1885,#1890,#1892,.T.);+#1890=VERTEX_POINT('',#1891);+#1891=CARTESIAN_POINT('',(-2.22,7.579347141319,1.387778780781E-16));+#1892=CIRCLE('',#1893,0.2);+#1893=AXIS2_PLACEMENT_3D('',#1894,#300,#1281);+#1894=CARTESIAN_POINT('',(-2.22,7.579347141319,0.2));+#1895=ORIENTED_EDGE('',*,*,#1896,.T.);+#1896=EDGE_CURVE('',#1890,#1897,#1899,.T.);+#1897=VERTEX_POINT('',#1898);+#1898=CARTESIAN_POINT('',(-2.22,8.,1.387778780781E-16));+#1899=LINE('',#1891,#1256);+#1900=ORIENTED_EDGE('',*,*,#1901,.T.);+#1901=EDGE_CURVE('',#1897,#1902,#1904,.T.);+#1902=VERTEX_POINT('',#1903);+#1903=CARTESIAN_POINT('',(-2.22,8.,0.1));+#1904=LINE('',#1898,#1074);+#1905=ORIENTED_EDGE('',*,*,#1906,.T.);+#1906=EDGE_CURVE('',#1902,#1907,#1909,.T.);+#1907=VERTEX_POINT('',#1908);+#1908=CARTESIAN_POINT('',(-2.22,7.579347141319,0.1));+#1909=LINE('',#1903,#255);+#1910=ORIENTED_EDGE('',*,*,#1911,.T.);+#1911=EDGE_CURVE('',#1907,#1912,#1914,.T.);+#1912=VERTEX_POINT('',#1913);+#1913=CARTESIAN_POINT('',(-2.22,7.480866366018,0.182635182233));+#1914=CIRCLE('',#1915,1.E-01);+#1915=AXIS2_PLACEMENT_3D('',#1894,#1303,#1304);+#1916=ORIENTED_EDGE('',*,*,#1917,.T.);+#1917=EDGE_CURVE('',#1912,#1918,#1920,.T.);+#1918=VERTEX_POINT('',#1919);+#1919=CARTESIAN_POINT('',(-2.22,7.396961550602,0.684729635533));+#1920=LINE('',#1913,#1310);+#1921=ORIENTED_EDGE('',*,*,#1922,.T.);+#1922=EDGE_CURVE('',#1918,#436,#1923,.T.);+#1923=CIRCLE('',#1924,0.2);+#1924=AXIS2_PLACEMENT_3D('',#1882,#14,#1316);+#1925=ORIENTED_EDGE('',*,*,#435,.T.);+#1926=PLANE('',#1927);+#1927=AXIS2_PLACEMENT_3D('',#1928,#300,#13);+#1928=CARTESIAN_POINT('',(-2.22,7.414276639233,0.410238158856));+#1929=ADVANCED_FACE('',(#1930),#1993,.T.);+#1930=FACE_BOUND('',#1931,.T.);+#1931=EDGE_LOOP('',(#1932,#1938,#1944,#1951,#1956,#1963,#1968,#1973,#1978,#1984,#1989,#442));+#1932=ORIENTED_EDGE('',*,*,#1933,.F.);+#1933=EDGE_CURVE('',#1934,#444,#1936,.T.);+#1934=VERTEX_POINT('',#1935);+#1935=CARTESIAN_POINT('',(-1.78,7.,0.75));+#1936=LINE('',#1937,#1074);+#1937=CARTESIAN_POINT('',(-1.78,7.,0.630119079428));+#1938=ORIENTED_EDGE('',*,*,#1939,.T.);+#1939=EDGE_CURVE('',#1934,#1940,#1942,.T.);+#1940=VERTEX_POINT('',#1941);+#1941=CARTESIAN_POINT('',(-1.78,7.2,0.75));+#1942=LINE('',#1943,#1256);+#1943=CARTESIAN_POINT('',(-1.78,6.85,0.75));+#1944=ORIENTED_EDGE('',*,*,#1945,.T.);+#1945=EDGE_CURVE('',#1940,#1946,#1948,.T.);+#1946=VERTEX_POINT('',#1947);+#1947=CARTESIAN_POINT('',(-1.78,7.298480775301,0.667364817767));+#1948=CIRCLE('',#1949,0.1);+#1949=AXIS2_PLACEMENT_3D('',#1950,#1265,#1266);+#1950=CARTESIAN_POINT('',(-1.78,7.2,0.65));+#1951=ORIENTED_EDGE('',*,*,#1952,.T.);+#1952=EDGE_CURVE('',#1946,#1953,#1955,.T.);+#1953=VERTEX_POINT('',#1954);+#1954=CARTESIAN_POINT('',(-1.78,7.382385590716,0.165270364467));+#1955=LINE('',#1947,#1272);+#1956=ORIENTED_EDGE('',*,*,#1957,.T.);+#1957=EDGE_CURVE('',#1953,#1958,#1960,.T.);+#1958=VERTEX_POINT('',#1959);+#1959=CARTESIAN_POINT('',(-1.78,7.579347141319,1.387778780781E-16));+#1960=CIRCLE('',#1961,0.2);+#1961=AXIS2_PLACEMENT_3D('',#1962,#300,#1281);+#1962=CARTESIAN_POINT('',(-1.78,7.579347141319,0.2));+#1963=ORIENTED_EDGE('',*,*,#1964,.T.);+#1964=EDGE_CURVE('',#1958,#1965,#1967,.T.);+#1965=VERTEX_POINT('',#1966);+#1966=CARTESIAN_POINT('',(-1.78,8.,1.387778780781E-16));+#1967=LINE('',#1959,#1256);+#1968=ORIENTED_EDGE('',*,*,#1969,.T.);+#1969=EDGE_CURVE('',#1965,#1970,#1972,.T.);+#1970=VERTEX_POINT('',#1971);+#1971=CARTESIAN_POINT('',(-1.78,8.,0.1));+#1972=LINE('',#1966,#1074);+#1973=ORIENTED_EDGE('',*,*,#1974,.T.);+#1974=EDGE_CURVE('',#1970,#1975,#1977,.T.);+#1975=VERTEX_POINT('',#1976);+#1976=CARTESIAN_POINT('',(-1.78,7.579347141319,0.1));+#1977=LINE('',#1971,#255);+#1978=ORIENTED_EDGE('',*,*,#1979,.T.);+#1979=EDGE_CURVE('',#1975,#1980,#1982,.T.);+#1980=VERTEX_POINT('',#1981);+#1981=CARTESIAN_POINT('',(-1.78,7.480866366018,0.182635182233));+#1982=CIRCLE('',#1983,1.E-01);+#1983=AXIS2_PLACEMENT_3D('',#1962,#1303,#1304);+#1984=ORIENTED_EDGE('',*,*,#1985,.T.);+#1985=EDGE_CURVE('',#1980,#1986,#1988,.T.);+#1986=VERTEX_POINT('',#1987);+#1987=CARTESIAN_POINT('',(-1.78,7.396961550602,0.684729635533));+#1988=LINE('',#1981,#1310);+#1989=ORIENTED_EDGE('',*,*,#1990,.T.);+#1990=EDGE_CURVE('',#1986,#439,#1991,.T.);+#1991=CIRCLE('',#1992,0.2);+#1992=AXIS2_PLACEMENT_3D('',#1950,#14,#1316);+#1993=PLANE('',#1994);+#1994=AXIS2_PLACEMENT_3D('',#1995,#300,#13);+#1995=CARTESIAN_POINT('',(-1.78,7.414276639233,0.410238158856));+#1996=ADVANCED_FACE('',(#1997),#2004,.T.);+#1997=FACE_BOUND('',#1998,.F.);+#1998=EDGE_LOOP('',(#1999,#1989,#2002,#2003));+#1999=ORIENTED_EDGE('',*,*,#2000,.T.);+#2000=EDGE_CURVE('',#1918,#1986,#2001,.T.);+#2001=LINE('',#1919,#299);+#2002=ORIENTED_EDGE('',*,*,#438,.F.);+#2003=ORIENTED_EDGE('',*,*,#1922,.F.);+#2004=CYLINDRICAL_SURFACE('',#2005,0.2);+#2005=AXIS2_PLACEMENT_3D('',#1882,#1265,#1316);+#2006=ADVANCED_FACE('',(#2007),#1244,.F.);+#2007=FACE_BOUND('',#2008,.F.);+#2008=EDGE_LOOP('',(#1932,#2009,#2013,#2017));+#2009=ORIENTED_EDGE('',*,*,#2010,.T.);+#2010=EDGE_CURVE('',#1934,#2011,#1238,.T.);+#2011=VERTEX_POINT('',#2012);+#2012=CARTESIAN_POINT('',(-1.22,7.,0.75));+#2013=ORIENTED_EDGE('',*,*,#2014,.T.);+#2014=EDGE_CURVE('',#2011,#459,#2015,.T.);+#2015=LINE('',#2016,#1074);+#2016=CARTESIAN_POINT('',(-1.22,7.,0.630119079428));+#2017=ORIENTED_EDGE('',*,*,#458,.F.);+#2018=ADVANCED_FACE('',(#2019),#2078,.F.);+#2019=FACE_BOUND('',#2020,.F.);+#2020=EDGE_LOOP('',(#2021,#2022,#2028,#2035,#2040,#2047,#2052,#2057,#2062,#2068,#2073,#2077));+#2021=ORIENTED_EDGE('',*,*,#2014,.F.);+#2022=ORIENTED_EDGE('',*,*,#2023,.T.);+#2023=EDGE_CURVE('',#2011,#2024,#2026,.T.);+#2024=VERTEX_POINT('',#2025);+#2025=CARTESIAN_POINT('',(-1.22,7.2,0.75));+#2026=LINE('',#2027,#1256);+#2027=CARTESIAN_POINT('',(-1.22,6.85,0.75));+#2028=ORIENTED_EDGE('',*,*,#2029,.T.);+#2029=EDGE_CURVE('',#2024,#2030,#2032,.T.);+#2030=VERTEX_POINT('',#2031);+#2031=CARTESIAN_POINT('',(-1.22,7.298480775301,0.667364817767));+#2032=CIRCLE('',#2033,0.1);+#2033=AXIS2_PLACEMENT_3D('',#2034,#1265,#1266);+#2034=CARTESIAN_POINT('',(-1.22,7.2,0.65));+#2035=ORIENTED_EDGE('',*,*,#2036,.T.);+#2036=EDGE_CURVE('',#2030,#2037,#2039,.T.);+#2037=VERTEX_POINT('',#2038);+#2038=CARTESIAN_POINT('',(-1.22,7.382385590716,0.165270364467));+#2039=LINE('',#2031,#1272);+#2040=ORIENTED_EDGE('',*,*,#2041,.T.);+#2041=EDGE_CURVE('',#2037,#2042,#2044,.T.);+#2042=VERTEX_POINT('',#2043);+#2043=CARTESIAN_POINT('',(-1.22,7.579347141319,1.387778780781E-16));+#2044=CIRCLE('',#2045,0.2);+#2045=AXIS2_PLACEMENT_3D('',#2046,#300,#1281);+#2046=CARTESIAN_POINT('',(-1.22,7.579347141319,0.2));+#2047=ORIENTED_EDGE('',*,*,#2048,.T.);+#2048=EDGE_CURVE('',#2042,#2049,#2051,.T.);+#2049=VERTEX_POINT('',#2050);+#2050=CARTESIAN_POINT('',(-1.22,8.,1.387778780781E-16));+#2051=LINE('',#2043,#1256);+#2052=ORIENTED_EDGE('',*,*,#2053,.T.);+#2053=EDGE_CURVE('',#2049,#2054,#2056,.T.);+#2054=VERTEX_POINT('',#2055);+#2055=CARTESIAN_POINT('',(-1.22,8.,0.1));+#2056=LINE('',#2050,#1074);+#2057=ORIENTED_EDGE('',*,*,#2058,.T.);+#2058=EDGE_CURVE('',#2054,#2059,#2061,.T.);+#2059=VERTEX_POINT('',#2060);+#2060=CARTESIAN_POINT('',(-1.22,7.579347141319,0.1));+#2061=LINE('',#2055,#255);+#2062=ORIENTED_EDGE('',*,*,#2063,.T.);+#2063=EDGE_CURVE('',#2059,#2064,#2066,.T.);+#2064=VERTEX_POINT('',#2065);+#2065=CARTESIAN_POINT('',(-1.22,7.480866366018,0.182635182233));+#2066=CIRCLE('',#2067,1.E-01);+#2067=AXIS2_PLACEMENT_3D('',#2046,#1303,#1304);+#2068=ORIENTED_EDGE('',*,*,#2069,.T.);+#2069=EDGE_CURVE('',#2064,#2070,#2072,.T.);+#2070=VERTEX_POINT('',#2071);+#2071=CARTESIAN_POINT('',(-1.22,7.396961550602,0.684729635533));+#2072=LINE('',#2065,#1310);+#2073=ORIENTED_EDGE('',*,*,#2074,.T.);+#2074=EDGE_CURVE('',#2070,#471,#2075,.T.);+#2075=CIRCLE('',#2076,0.2);+#2076=AXIS2_PLACEMENT_3D('',#2034,#14,#1316);+#2077=ORIENTED_EDGE('',*,*,#470,.T.);+#2078=PLANE('',#2079);+#2079=AXIS2_PLACEMENT_3D('',#2080,#300,#13);+#2080=CARTESIAN_POINT('',(-1.22,7.414276639233,0.410238158856));+#2081=ADVANCED_FACE('',(#2082),#2145,.T.);+#2082=FACE_BOUND('',#2083,.T.);+#2083=EDGE_LOOP('',(#2084,#2090,#2096,#2103,#2108,#2115,#2120,#2125,#2130,#2136,#2141,#477));+#2084=ORIENTED_EDGE('',*,*,#2085,.F.);+#2085=EDGE_CURVE('',#2086,#479,#2088,.T.);+#2086=VERTEX_POINT('',#2087);+#2087=CARTESIAN_POINT('',(-0.78,7.,0.75));+#2088=LINE('',#2089,#1074);+#2089=CARTESIAN_POINT('',(-0.78,7.,0.630119079428));+#2090=ORIENTED_EDGE('',*,*,#2091,.T.);+#2091=EDGE_CURVE('',#2086,#2092,#2094,.T.);+#2092=VERTEX_POINT('',#2093);+#2093=CARTESIAN_POINT('',(-0.78,7.2,0.75));+#2094=LINE('',#2095,#1256);+#2095=CARTESIAN_POINT('',(-0.78,6.85,0.75));+#2096=ORIENTED_EDGE('',*,*,#2097,.T.);+#2097=EDGE_CURVE('',#2092,#2098,#2100,.T.);+#2098=VERTEX_POINT('',#2099);+#2099=CARTESIAN_POINT('',(-0.78,7.298480775301,0.667364817767));+#2100=CIRCLE('',#2101,0.1);+#2101=AXIS2_PLACEMENT_3D('',#2102,#1265,#1266);+#2102=CARTESIAN_POINT('',(-0.78,7.2,0.65));+#2103=ORIENTED_EDGE('',*,*,#2104,.T.);+#2104=EDGE_CURVE('',#2098,#2105,#2107,.T.);+#2105=VERTEX_POINT('',#2106);+#2106=CARTESIAN_POINT('',(-0.78,7.382385590716,0.165270364467));+#2107=LINE('',#2099,#1272);+#2108=ORIENTED_EDGE('',*,*,#2109,.T.);+#2109=EDGE_CURVE('',#2105,#2110,#2112,.T.);+#2110=VERTEX_POINT('',#2111);+#2111=CARTESIAN_POINT('',(-0.78,7.579347141319,1.387778780781E-16));+#2112=CIRCLE('',#2113,0.2);+#2113=AXIS2_PLACEMENT_3D('',#2114,#300,#1281);+#2114=CARTESIAN_POINT('',(-0.78,7.579347141319,0.2));+#2115=ORIENTED_EDGE('',*,*,#2116,.T.);+#2116=EDGE_CURVE('',#2110,#2117,#2119,.T.);+#2117=VERTEX_POINT('',#2118);+#2118=CARTESIAN_POINT('',(-0.78,8.,1.387778780781E-16));+#2119=LINE('',#2111,#1256);+#2120=ORIENTED_EDGE('',*,*,#2121,.T.);+#2121=EDGE_CURVE('',#2117,#2122,#2124,.T.);+#2122=VERTEX_POINT('',#2123);+#2123=CARTESIAN_POINT('',(-0.78,8.,0.1));+#2124=LINE('',#2118,#1074);+#2125=ORIENTED_EDGE('',*,*,#2126,.T.);+#2126=EDGE_CURVE('',#2122,#2127,#2129,.T.);+#2127=VERTEX_POINT('',#2128);+#2128=CARTESIAN_POINT('',(-0.78,7.579347141319,0.1));+#2129=LINE('',#2123,#255);+#2130=ORIENTED_EDGE('',*,*,#2131,.T.);+#2131=EDGE_CURVE('',#2127,#2132,#2134,.T.);+#2132=VERTEX_POINT('',#2133);+#2133=CARTESIAN_POINT('',(-0.78,7.480866366018,0.182635182233));+#2134=CIRCLE('',#2135,1.E-01);+#2135=AXIS2_PLACEMENT_3D('',#2114,#1303,#1304);+#2136=ORIENTED_EDGE('',*,*,#2137,.T.);+#2137=EDGE_CURVE('',#2132,#2138,#2140,.T.);+#2138=VERTEX_POINT('',#2139);+#2139=CARTESIAN_POINT('',(-0.78,7.396961550602,0.684729635533));+#2140=LINE('',#2133,#1310);+#2141=ORIENTED_EDGE('',*,*,#2142,.T.);+#2142=EDGE_CURVE('',#2138,#474,#2143,.T.);+#2143=CIRCLE('',#2144,0.2);+#2144=AXIS2_PLACEMENT_3D('',#2102,#14,#1316);+#2145=PLANE('',#2146);+#2146=AXIS2_PLACEMENT_3D('',#2147,#300,#13);+#2147=CARTESIAN_POINT('',(-0.78,7.414276639233,0.410238158856));+#2148=ADVANCED_FACE('',(#2149),#2156,.T.);+#2149=FACE_BOUND('',#2150,.F.);+#2150=EDGE_LOOP('',(#2151,#2141,#2154,#2155));+#2151=ORIENTED_EDGE('',*,*,#2152,.T.);+#2152=EDGE_CURVE('',#2070,#2138,#2153,.T.);+#2153=LINE('',#2071,#299);+#2154=ORIENTED_EDGE('',*,*,#473,.F.);+#2155=ORIENTED_EDGE('',*,*,#2074,.F.);+#2156=CYLINDRICAL_SURFACE('',#2157,0.2);+#2157=AXIS2_PLACEMENT_3D('',#2034,#1265,#1316);+#2158=ADVANCED_FACE('',(#2159),#1244,.F.);+#2159=FACE_BOUND('',#2160,.F.);+#2160=EDGE_LOOP('',(#2084,#2161,#2165,#2169));+#2161=ORIENTED_EDGE('',*,*,#2162,.T.);+#2162=EDGE_CURVE('',#2086,#2163,#1238,.T.);+#2163=VERTEX_POINT('',#2164);+#2164=CARTESIAN_POINT('',(-0.22,7.,0.75));+#2165=ORIENTED_EDGE('',*,*,#2166,.T.);+#2166=EDGE_CURVE('',#2163,#494,#2167,.T.);+#2167=LINE('',#2168,#1074);+#2168=CARTESIAN_POINT('',(-0.22,7.,0.630119079428));+#2169=ORIENTED_EDGE('',*,*,#493,.F.);+#2170=ADVANCED_FACE('',(#2171),#2230,.F.);+#2171=FACE_BOUND('',#2172,.F.);+#2172=EDGE_LOOP('',(#2173,#2174,#2180,#2187,#2192,#2199,#2204,#2209,#2214,#2220,#2225,#2229));+#2173=ORIENTED_EDGE('',*,*,#2166,.F.);+#2174=ORIENTED_EDGE('',*,*,#2175,.T.);+#2175=EDGE_CURVE('',#2163,#2176,#2178,.T.);+#2176=VERTEX_POINT('',#2177);+#2177=CARTESIAN_POINT('',(-0.22,7.2,0.75));+#2178=LINE('',#2179,#1256);+#2179=CARTESIAN_POINT('',(-0.22,6.85,0.75));+#2180=ORIENTED_EDGE('',*,*,#2181,.T.);+#2181=EDGE_CURVE('',#2176,#2182,#2184,.T.);+#2182=VERTEX_POINT('',#2183);+#2183=CARTESIAN_POINT('',(-0.22,7.298480775301,0.667364817767));+#2184=CIRCLE('',#2185,0.1);+#2185=AXIS2_PLACEMENT_3D('',#2186,#1265,#1266);+#2186=CARTESIAN_POINT('',(-0.22,7.2,0.65));+#2187=ORIENTED_EDGE('',*,*,#2188,.T.);+#2188=EDGE_CURVE('',#2182,#2189,#2191,.T.);+#2189=VERTEX_POINT('',#2190);+#2190=CARTESIAN_POINT('',(-0.22,7.382385590716,0.165270364467));+#2191=LINE('',#2183,#1272);+#2192=ORIENTED_EDGE('',*,*,#2193,.T.);+#2193=EDGE_CURVE('',#2189,#2194,#2196,.T.);+#2194=VERTEX_POINT('',#2195);+#2195=CARTESIAN_POINT('',(-0.22,7.579347141319,1.387778780781E-16));+#2196=CIRCLE('',#2197,0.2);+#2197=AXIS2_PLACEMENT_3D('',#2198,#300,#1281);+#2198=CARTESIAN_POINT('',(-0.22,7.579347141319,0.2));+#2199=ORIENTED_EDGE('',*,*,#2200,.T.);+#2200=EDGE_CURVE('',#2194,#2201,#2203,.T.);+#2201=VERTEX_POINT('',#2202);+#2202=CARTESIAN_POINT('',(-0.22,8.,1.387778780781E-16));+#2203=LINE('',#2195,#1256);+#2204=ORIENTED_EDGE('',*,*,#2205,.T.);+#2205=EDGE_CURVE('',#2201,#2206,#2208,.T.);+#2206=VERTEX_POINT('',#2207);+#2207=CARTESIAN_POINT('',(-0.22,8.,0.1));+#2208=LINE('',#2202,#1074);+#2209=ORIENTED_EDGE('',*,*,#2210,.T.);+#2210=EDGE_CURVE('',#2206,#2211,#2213,.T.);+#2211=VERTEX_POINT('',#2212);+#2212=CARTESIAN_POINT('',(-0.22,7.579347141319,0.1));+#2213=LINE('',#2207,#255);+#2214=ORIENTED_EDGE('',*,*,#2215,.T.);+#2215=EDGE_CURVE('',#2211,#2216,#2218,.T.);+#2216=VERTEX_POINT('',#2217);+#2217=CARTESIAN_POINT('',(-0.22,7.480866366018,0.182635182233));+#2218=CIRCLE('',#2219,1.E-01);+#2219=AXIS2_PLACEMENT_3D('',#2198,#1303,#1304);+#2220=ORIENTED_EDGE('',*,*,#2221,.T.);+#2221=EDGE_CURVE('',#2216,#2222,#2224,.T.);+#2222=VERTEX_POINT('',#2223);+#2223=CARTESIAN_POINT('',(-0.22,7.396961550602,0.684729635533));+#2224=LINE('',#2217,#1310);+#2225=ORIENTED_EDGE('',*,*,#2226,.T.);+#2226=EDGE_CURVE('',#2222,#506,#2227,.T.);+#2227=CIRCLE('',#2228,0.2);+#2228=AXIS2_PLACEMENT_3D('',#2186,#14,#1316);+#2229=ORIENTED_EDGE('',*,*,#505,.T.);+#2230=PLANE('',#2231);+#2231=AXIS2_PLACEMENT_3D('',#2232,#300,#13);+#2232=CARTESIAN_POINT('',(-0.22,7.414276639233,0.410238158856));+#2233=ADVANCED_FACE('',(#2234),#2297,.T.);+#2234=FACE_BOUND('',#2235,.T.);+#2235=EDGE_LOOP('',(#2236,#2242,#2248,#2255,#2260,#2267,#2272,#2277,#2282,#2288,#2293,#512));+#2236=ORIENTED_EDGE('',*,*,#2237,.F.);+#2237=EDGE_CURVE('',#2238,#514,#2240,.T.);+#2238=VERTEX_POINT('',#2239);+#2239=CARTESIAN_POINT('',(0.22,7.,0.75));+#2240=LINE('',#2241,#1074);+#2241=CARTESIAN_POINT('',(0.22,7.,0.630119079428));+#2242=ORIENTED_EDGE('',*,*,#2243,.T.);+#2243=EDGE_CURVE('',#2238,#2244,#2246,.T.);+#2244=VERTEX_POINT('',#2245);+#2245=CARTESIAN_POINT('',(0.22,7.2,0.75));+#2246=LINE('',#2247,#1256);+#2247=CARTESIAN_POINT('',(0.22,6.85,0.75));+#2248=ORIENTED_EDGE('',*,*,#2249,.T.);+#2249=EDGE_CURVE('',#2244,#2250,#2252,.T.);+#2250=VERTEX_POINT('',#2251);+#2251=CARTESIAN_POINT('',(0.22,7.298480775301,0.667364817767));+#2252=CIRCLE('',#2253,0.1);+#2253=AXIS2_PLACEMENT_3D('',#2254,#1265,#1266);+#2254=CARTESIAN_POINT('',(0.22,7.2,0.65));+#2255=ORIENTED_EDGE('',*,*,#2256,.T.);+#2256=EDGE_CURVE('',#2250,#2257,#2259,.T.);+#2257=VERTEX_POINT('',#2258);+#2258=CARTESIAN_POINT('',(0.22,7.382385590716,0.165270364467));+#2259=LINE('',#2251,#1272);+#2260=ORIENTED_EDGE('',*,*,#2261,.T.);+#2261=EDGE_CURVE('',#2257,#2262,#2264,.T.);+#2262=VERTEX_POINT('',#2263);+#2263=CARTESIAN_POINT('',(0.22,7.579347141319,1.387778780781E-16));+#2264=CIRCLE('',#2265,0.2);+#2265=AXIS2_PLACEMENT_3D('',#2266,#300,#1281);+#2266=CARTESIAN_POINT('',(0.22,7.579347141319,0.2));+#2267=ORIENTED_EDGE('',*,*,#2268,.T.);+#2268=EDGE_CURVE('',#2262,#2269,#2271,.T.);+#2269=VERTEX_POINT('',#2270);+#2270=CARTESIAN_POINT('',(0.22,8.,1.387778780781E-16));+#2271=LINE('',#2263,#1256);+#2272=ORIENTED_EDGE('',*,*,#2273,.T.);+#2273=EDGE_CURVE('',#2269,#2274,#2276,.T.);+#2274=VERTEX_POINT('',#2275);+#2275=CARTESIAN_POINT('',(0.22,8.,0.1));+#2276=LINE('',#2270,#1074);+#2277=ORIENTED_EDGE('',*,*,#2278,.T.);+#2278=EDGE_CURVE('',#2274,#2279,#2281,.T.);+#2279=VERTEX_POINT('',#2280);+#2280=CARTESIAN_POINT('',(0.22,7.579347141319,0.1));+#2281=LINE('',#2275,#255);+#2282=ORIENTED_EDGE('',*,*,#2283,.T.);+#2283=EDGE_CURVE('',#2279,#2284,#2286,.T.);+#2284=VERTEX_POINT('',#2285);+#2285=CARTESIAN_POINT('',(0.22,7.480866366018,0.182635182233));+#2286=CIRCLE('',#2287,1.E-01);+#2287=AXIS2_PLACEMENT_3D('',#2266,#1303,#1304);+#2288=ORIENTED_EDGE('',*,*,#2289,.T.);+#2289=EDGE_CURVE('',#2284,#2290,#2292,.T.);+#2290=VERTEX_POINT('',#2291);+#2291=CARTESIAN_POINT('',(0.22,7.396961550602,0.684729635533));+#2292=LINE('',#2285,#1310);+#2293=ORIENTED_EDGE('',*,*,#2294,.T.);+#2294=EDGE_CURVE('',#2290,#509,#2295,.T.);+#2295=CIRCLE('',#2296,0.2);+#2296=AXIS2_PLACEMENT_3D('',#2254,#14,#1316);+#2297=PLANE('',#2298);+#2298=AXIS2_PLACEMENT_3D('',#2299,#300,#13);+#2299=CARTESIAN_POINT('',(0.22,7.414276639233,0.410238158856));+#2300=ADVANCED_FACE('',(#2301),#2308,.T.);+#2301=FACE_BOUND('',#2302,.F.);+#2302=EDGE_LOOP('',(#2303,#2293,#2306,#2307));+#2303=ORIENTED_EDGE('',*,*,#2304,.T.);+#2304=EDGE_CURVE('',#2222,#2290,#2305,.T.);+#2305=LINE('',#2223,#299);+#2306=ORIENTED_EDGE('',*,*,#508,.F.);+#2307=ORIENTED_EDGE('',*,*,#2226,.F.);+#2308=CYLINDRICAL_SURFACE('',#2309,0.2);+#2309=AXIS2_PLACEMENT_3D('',#2186,#1265,#1316);+#2310=ADVANCED_FACE('',(#2311),#1244,.F.);+#2311=FACE_BOUND('',#2312,.F.);+#2312=EDGE_LOOP('',(#2236,#2313,#2317,#2321));+#2313=ORIENTED_EDGE('',*,*,#2314,.T.);+#2314=EDGE_CURVE('',#2238,#2315,#1238,.T.);+#2315=VERTEX_POINT('',#2316);+#2316=CARTESIAN_POINT('',(0.78,7.,0.75));+#2317=ORIENTED_EDGE('',*,*,#2318,.T.);+#2318=EDGE_CURVE('',#2315,#529,#2319,.T.);+#2319=LINE('',#2320,#1074);+#2320=CARTESIAN_POINT('',(0.78,7.,0.630119079428));+#2321=ORIENTED_EDGE('',*,*,#528,.F.);+#2322=ADVANCED_FACE('',(#2323),#2382,.F.);+#2323=FACE_BOUND('',#2324,.F.);+#2324=EDGE_LOOP('',(#2325,#2326,#2332,#2339,#2344,#2351,#2356,#2361,#2366,#2372,#2377,#2381));+#2325=ORIENTED_EDGE('',*,*,#2318,.F.);+#2326=ORIENTED_EDGE('',*,*,#2327,.T.);+#2327=EDGE_CURVE('',#2315,#2328,#2330,.T.);+#2328=VERTEX_POINT('',#2329);+#2329=CARTESIAN_POINT('',(0.78,7.2,0.75));+#2330=LINE('',#2331,#1256);+#2331=CARTESIAN_POINT('',(0.78,6.85,0.75));+#2332=ORIENTED_EDGE('',*,*,#2333,.T.);+#2333=EDGE_CURVE('',#2328,#2334,#2336,.T.);+#2334=VERTEX_POINT('',#2335);+#2335=CARTESIAN_POINT('',(0.78,7.298480775301,0.667364817767));+#2336=CIRCLE('',#2337,0.1);+#2337=AXIS2_PLACEMENT_3D('',#2338,#1265,#1266);+#2338=CARTESIAN_POINT('',(0.78,7.2,0.65));+#2339=ORIENTED_EDGE('',*,*,#2340,.T.);+#2340=EDGE_CURVE('',#2334,#2341,#2343,.T.);+#2341=VERTEX_POINT('',#2342);+#2342=CARTESIAN_POINT('',(0.78,7.382385590716,0.165270364467));+#2343=LINE('',#2335,#1272);+#2344=ORIENTED_EDGE('',*,*,#2345,.T.);+#2345=EDGE_CURVE('',#2341,#2346,#2348,.T.);+#2346=VERTEX_POINT('',#2347);+#2347=CARTESIAN_POINT('',(0.78,7.579347141319,1.387778780781E-16));+#2348=CIRCLE('',#2349,0.2);+#2349=AXIS2_PLACEMENT_3D('',#2350,#300,#1281);+#2350=CARTESIAN_POINT('',(0.78,7.579347141319,0.2));+#2351=ORIENTED_EDGE('',*,*,#2352,.T.);+#2352=EDGE_CURVE('',#2346,#2353,#2355,.T.);+#2353=VERTEX_POINT('',#2354);+#2354=CARTESIAN_POINT('',(0.78,8.,1.387778780781E-16));+#2355=LINE('',#2347,#1256);+#2356=ORIENTED_EDGE('',*,*,#2357,.T.);+#2357=EDGE_CURVE('',#2353,#2358,#2360,.T.);+#2358=VERTEX_POINT('',#2359);+#2359=CARTESIAN_POINT('',(0.78,8.,0.1));+#2360=LINE('',#2354,#1074);+#2361=ORIENTED_EDGE('',*,*,#2362,.T.);+#2362=EDGE_CURVE('',#2358,#2363,#2365,.T.);+#2363=VERTEX_POINT('',#2364);+#2364=CARTESIAN_POINT('',(0.78,7.579347141319,0.1));+#2365=LINE('',#2359,#255);+#2366=ORIENTED_EDGE('',*,*,#2367,.T.);+#2367=EDGE_CURVE('',#2363,#2368,#2370,.T.);+#2368=VERTEX_POINT('',#2369);+#2369=CARTESIAN_POINT('',(0.78,7.480866366018,0.182635182233));+#2370=CIRCLE('',#2371,1.E-01);+#2371=AXIS2_PLACEMENT_3D('',#2350,#1303,#1304);+#2372=ORIENTED_EDGE('',*,*,#2373,.T.);+#2373=EDGE_CURVE('',#2368,#2374,#2376,.T.);+#2374=VERTEX_POINT('',#2375);+#2375=CARTESIAN_POINT('',(0.78,7.396961550602,0.684729635533));+#2376=LINE('',#2369,#1310);+#2377=ORIENTED_EDGE('',*,*,#2378,.T.);+#2378=EDGE_CURVE('',#2374,#541,#2379,.T.);+#2379=CIRCLE('',#2380,0.2);+#2380=AXIS2_PLACEMENT_3D('',#2338,#14,#1316);+#2381=ORIENTED_EDGE('',*,*,#540,.T.);+#2382=PLANE('',#2383);+#2383=AXIS2_PLACEMENT_3D('',#2384,#300,#13);+#2384=CARTESIAN_POINT('',(0.78,7.414276639233,0.410238158856));+#2385=ADVANCED_FACE('',(#2386),#2449,.T.);+#2386=FACE_BOUND('',#2387,.T.);+#2387=EDGE_LOOP('',(#2388,#2394,#2400,#2407,#2412,#2419,#2424,#2429,#2434,#2440,#2445,#547));+#2388=ORIENTED_EDGE('',*,*,#2389,.F.);+#2389=EDGE_CURVE('',#2390,#549,#2392,.T.);+#2390=VERTEX_POINT('',#2391);+#2391=CARTESIAN_POINT('',(1.22,7.,0.75));+#2392=LINE('',#2393,#1074);+#2393=CARTESIAN_POINT('',(1.22,7.,0.630119079428));+#2394=ORIENTED_EDGE('',*,*,#2395,.T.);+#2395=EDGE_CURVE('',#2390,#2396,#2398,.T.);+#2396=VERTEX_POINT('',#2397);+#2397=CARTESIAN_POINT('',(1.22,7.2,0.75));+#2398=LINE('',#2399,#1256);+#2399=CARTESIAN_POINT('',(1.22,6.85,0.75));+#2400=ORIENTED_EDGE('',*,*,#2401,.T.);+#2401=EDGE_CURVE('',#2396,#2402,#2404,.T.);+#2402=VERTEX_POINT('',#2403);+#2403=CARTESIAN_POINT('',(1.22,7.298480775301,0.667364817767));+#2404=CIRCLE('',#2405,0.1);+#2405=AXIS2_PLACEMENT_3D('',#2406,#1265,#1266);+#2406=CARTESIAN_POINT('',(1.22,7.2,0.65));+#2407=ORIENTED_EDGE('',*,*,#2408,.T.);+#2408=EDGE_CURVE('',#2402,#2409,#2411,.T.);+#2409=VERTEX_POINT('',#2410);+#2410=CARTESIAN_POINT('',(1.22,7.382385590716,0.165270364467));+#2411=LINE('',#2403,#1272);+#2412=ORIENTED_EDGE('',*,*,#2413,.T.);+#2413=EDGE_CURVE('',#2409,#2414,#2416,.T.);+#2414=VERTEX_POINT('',#2415);+#2415=CARTESIAN_POINT('',(1.22,7.579347141319,1.387778780781E-16));+#2416=CIRCLE('',#2417,0.2);+#2417=AXIS2_PLACEMENT_3D('',#2418,#300,#1281);+#2418=CARTESIAN_POINT('',(1.22,7.579347141319,0.2));+#2419=ORIENTED_EDGE('',*,*,#2420,.T.);+#2420=EDGE_CURVE('',#2414,#2421,#2423,.T.);+#2421=VERTEX_POINT('',#2422);+#2422=CARTESIAN_POINT('',(1.22,8.,1.387778780781E-16));+#2423=LINE('',#2415,#1256);+#2424=ORIENTED_EDGE('',*,*,#2425,.T.);+#2425=EDGE_CURVE('',#2421,#2426,#2428,.T.);+#2426=VERTEX_POINT('',#2427);+#2427=CARTESIAN_POINT('',(1.22,8.,0.1));+#2428=LINE('',#2422,#1074);+#2429=ORIENTED_EDGE('',*,*,#2430,.T.);+#2430=EDGE_CURVE('',#2426,#2431,#2433,.T.);+#2431=VERTEX_POINT('',#2432);+#2432=CARTESIAN_POINT('',(1.22,7.579347141319,0.1));+#2433=LINE('',#2427,#255);+#2434=ORIENTED_EDGE('',*,*,#2435,.T.);+#2435=EDGE_CURVE('',#2431,#2436,#2438,.T.);+#2436=VERTEX_POINT('',#2437);+#2437=CARTESIAN_POINT('',(1.22,7.480866366018,0.182635182233));+#2438=CIRCLE('',#2439,1.E-01);+#2439=AXIS2_PLACEMENT_3D('',#2418,#1303,#1304);+#2440=ORIENTED_EDGE('',*,*,#2441,.T.);+#2441=EDGE_CURVE('',#2436,#2442,#2444,.T.);+#2442=VERTEX_POINT('',#2443);+#2443=CARTESIAN_POINT('',(1.22,7.396961550602,0.684729635533));+#2444=LINE('',#2437,#1310);+#2445=ORIENTED_EDGE('',*,*,#2446,.T.);+#2446=EDGE_CURVE('',#2442,#544,#2447,.T.);+#2447=CIRCLE('',#2448,0.2);+#2448=AXIS2_PLACEMENT_3D('',#2406,#14,#1316);+#2449=PLANE('',#2450);+#2450=AXIS2_PLACEMENT_3D('',#2451,#300,#13);+#2451=CARTESIAN_POINT('',(1.22,7.414276639233,0.410238158856));+#2452=ADVANCED_FACE('',(#2453),#2460,.T.);+#2453=FACE_BOUND('',#2454,.F.);+#2454=EDGE_LOOP('',(#2455,#2445,#2458,#2459));+#2455=ORIENTED_EDGE('',*,*,#2456,.T.);+#2456=EDGE_CURVE('',#2374,#2442,#2457,.T.);+#2457=LINE('',#2375,#299);+#2458=ORIENTED_EDGE('',*,*,#543,.F.);+#2459=ORIENTED_EDGE('',*,*,#2378,.F.);+#2460=CYLINDRICAL_SURFACE('',#2461,0.2);+#2461=AXIS2_PLACEMENT_3D('',#2338,#1265,#1316);+#2462=ADVANCED_FACE('',(#2463),#1244,.F.);+#2463=FACE_BOUND('',#2464,.F.);+#2464=EDGE_LOOP('',(#2388,#2465,#2469,#2473));+#2465=ORIENTED_EDGE('',*,*,#2466,.T.);+#2466=EDGE_CURVE('',#2390,#2467,#1238,.T.);+#2467=VERTEX_POINT('',#2468);+#2468=CARTESIAN_POINT('',(1.78,7.,0.75));+#2469=ORIENTED_EDGE('',*,*,#2470,.T.);+#2470=EDGE_CURVE('',#2467,#564,#2471,.T.);+#2471=LINE('',#2472,#1074);+#2472=CARTESIAN_POINT('',(1.78,7.,0.630119079428));+#2473=ORIENTED_EDGE('',*,*,#563,.F.);+#2474=ADVANCED_FACE('',(#2475),#2534,.F.);+#2475=FACE_BOUND('',#2476,.F.);+#2476=EDGE_LOOP('',(#2477,#2478,#2484,#2491,#2496,#2503,#2508,#2513,#2518,#2524,#2529,#2533));+#2477=ORIENTED_EDGE('',*,*,#2470,.F.);+#2478=ORIENTED_EDGE('',*,*,#2479,.T.);+#2479=EDGE_CURVE('',#2467,#2480,#2482,.T.);+#2480=VERTEX_POINT('',#2481);+#2481=CARTESIAN_POINT('',(1.78,7.2,0.75));+#2482=LINE('',#2483,#1256);+#2483=CARTESIAN_POINT('',(1.78,6.85,0.75));+#2484=ORIENTED_EDGE('',*,*,#2485,.T.);+#2485=EDGE_CURVE('',#2480,#2486,#2488,.T.);+#2486=VERTEX_POINT('',#2487);+#2487=CARTESIAN_POINT('',(1.78,7.298480775301,0.667364817767));+#2488=CIRCLE('',#2489,0.1);+#2489=AXIS2_PLACEMENT_3D('',#2490,#1265,#1266);+#2490=CARTESIAN_POINT('',(1.78,7.2,0.65));+#2491=ORIENTED_EDGE('',*,*,#2492,.T.);+#2492=EDGE_CURVE('',#2486,#2493,#2495,.T.);+#2493=VERTEX_POINT('',#2494);+#2494=CARTESIAN_POINT('',(1.78,7.382385590716,0.165270364467));+#2495=LINE('',#2487,#1272);+#2496=ORIENTED_EDGE('',*,*,#2497,.T.);+#2497=EDGE_CURVE('',#2493,#2498,#2500,.T.);+#2498=VERTEX_POINT('',#2499);+#2499=CARTESIAN_POINT('',(1.78,7.579347141319,1.387778780781E-16));+#2500=CIRCLE('',#2501,0.2);+#2501=AXIS2_PLACEMENT_3D('',#2502,#300,#1281);+#2502=CARTESIAN_POINT('',(1.78,7.579347141319,0.2));+#2503=ORIENTED_EDGE('',*,*,#2504,.T.);+#2504=EDGE_CURVE('',#2498,#2505,#2507,.T.);+#2505=VERTEX_POINT('',#2506);+#2506=CARTESIAN_POINT('',(1.78,8.,1.387778780781E-16));+#2507=LINE('',#2499,#1256);+#2508=ORIENTED_EDGE('',*,*,#2509,.T.);+#2509=EDGE_CURVE('',#2505,#2510,#2512,.T.);+#2510=VERTEX_POINT('',#2511);+#2511=CARTESIAN_POINT('',(1.78,8.,0.1));+#2512=LINE('',#2506,#1074);+#2513=ORIENTED_EDGE('',*,*,#2514,.T.);+#2514=EDGE_CURVE('',#2510,#2515,#2517,.T.);+#2515=VERTEX_POINT('',#2516);+#2516=CARTESIAN_POINT('',(1.78,7.579347141319,0.1));+#2517=LINE('',#2511,#255);+#2518=ORIENTED_EDGE('',*,*,#2519,.T.);+#2519=EDGE_CURVE('',#2515,#2520,#2522,.T.);+#2520=VERTEX_POINT('',#2521);+#2521=CARTESIAN_POINT('',(1.78,7.480866366018,0.182635182233));+#2522=CIRCLE('',#2523,1.E-01);+#2523=AXIS2_PLACEMENT_3D('',#2502,#1303,#1304);+#2524=ORIENTED_EDGE('',*,*,#2525,.T.);+#2525=EDGE_CURVE('',#2520,#2526,#2528,.T.);+#2526=VERTEX_POINT('',#2527);+#2527=CARTESIAN_POINT('',(1.78,7.396961550602,0.684729635533));+#2528=LINE('',#2521,#1310);+#2529=ORIENTED_EDGE('',*,*,#2530,.T.);+#2530=EDGE_CURVE('',#2526,#576,#2531,.T.);+#2531=CIRCLE('',#2532,0.2);+#2532=AXIS2_PLACEMENT_3D('',#2490,#14,#1316);+#2533=ORIENTED_EDGE('',*,*,#575,.T.);+#2534=PLANE('',#2535);+#2535=AXIS2_PLACEMENT_3D('',#2536,#300,#13);+#2536=CARTESIAN_POINT('',(1.78,7.414276639233,0.410238158856));+#2537=ADVANCED_FACE('',(#2538),#2601,.T.);+#2538=FACE_BOUND('',#2539,.T.);+#2539=EDGE_LOOP('',(#2540,#2546,#2552,#2559,#2564,#2571,#2576,#2581,#2586,#2592,#2597,#582));+#2540=ORIENTED_EDGE('',*,*,#2541,.F.);+#2541=EDGE_CURVE('',#2542,#584,#2544,.T.);+#2542=VERTEX_POINT('',#2543);+#2543=CARTESIAN_POINT('',(2.22,7.,0.75));+#2544=LINE('',#2545,#1074);+#2545=CARTESIAN_POINT('',(2.22,7.,0.630119079428));+#2546=ORIENTED_EDGE('',*,*,#2547,.T.);+#2547=EDGE_CURVE('',#2542,#2548,#2550,.T.);+#2548=VERTEX_POINT('',#2549);+#2549=CARTESIAN_POINT('',(2.22,7.2,0.75));+#2550=LINE('',#2551,#1256);+#2551=CARTESIAN_POINT('',(2.22,6.85,0.75));+#2552=ORIENTED_EDGE('',*,*,#2553,.T.);+#2553=EDGE_CURVE('',#2548,#2554,#2556,.T.);+#2554=VERTEX_POINT('',#2555);+#2555=CARTESIAN_POINT('',(2.22,7.298480775301,0.667364817767));+#2556=CIRCLE('',#2557,0.1);+#2557=AXIS2_PLACEMENT_3D('',#2558,#1265,#1266);+#2558=CARTESIAN_POINT('',(2.22,7.2,0.65));+#2559=ORIENTED_EDGE('',*,*,#2560,.T.);+#2560=EDGE_CURVE('',#2554,#2561,#2563,.T.);+#2561=VERTEX_POINT('',#2562);+#2562=CARTESIAN_POINT('',(2.22,7.382385590716,0.165270364467));+#2563=LINE('',#2555,#1272);+#2564=ORIENTED_EDGE('',*,*,#2565,.T.);+#2565=EDGE_CURVE('',#2561,#2566,#2568,.T.);+#2566=VERTEX_POINT('',#2567);+#2567=CARTESIAN_POINT('',(2.22,7.579347141319,1.387778780781E-16));+#2568=CIRCLE('',#2569,0.2);+#2569=AXIS2_PLACEMENT_3D('',#2570,#300,#1281);+#2570=CARTESIAN_POINT('',(2.22,7.579347141319,0.2));+#2571=ORIENTED_EDGE('',*,*,#2572,.T.);+#2572=EDGE_CURVE('',#2566,#2573,#2575,.T.);+#2573=VERTEX_POINT('',#2574);+#2574=CARTESIAN_POINT('',(2.22,8.,1.387778780781E-16));+#2575=LINE('',#2567,#1256);+#2576=ORIENTED_EDGE('',*,*,#2577,.T.);+#2577=EDGE_CURVE('',#2573,#2578,#2580,.T.);+#2578=VERTEX_POINT('',#2579);+#2579=CARTESIAN_POINT('',(2.22,8.,0.1));+#2580=LINE('',#2574,#1074);+#2581=ORIENTED_EDGE('',*,*,#2582,.T.);+#2582=EDGE_CURVE('',#2578,#2583,#2585,.T.);+#2583=VERTEX_POINT('',#2584);+#2584=CARTESIAN_POINT('',(2.22,7.579347141319,0.1));+#2585=LINE('',#2579,#255);+#2586=ORIENTED_EDGE('',*,*,#2587,.T.);+#2587=EDGE_CURVE('',#2583,#2588,#2590,.T.);+#2588=VERTEX_POINT('',#2589);+#2589=CARTESIAN_POINT('',(2.22,7.480866366018,0.182635182233));+#2590=CIRCLE('',#2591,1.E-01);+#2591=AXIS2_PLACEMENT_3D('',#2570,#1303,#1304);+#2592=ORIENTED_EDGE('',*,*,#2593,.T.);+#2593=EDGE_CURVE('',#2588,#2594,#2596,.T.);+#2594=VERTEX_POINT('',#2595);+#2595=CARTESIAN_POINT('',(2.22,7.396961550602,0.684729635533));+#2596=LINE('',#2589,#1310);+#2597=ORIENTED_EDGE('',*,*,#2598,.T.);+#2598=EDGE_CURVE('',#2594,#579,#2599,.T.);+#2599=CIRCLE('',#2600,0.2);+#2600=AXIS2_PLACEMENT_3D('',#2558,#14,#1316);+#2601=PLANE('',#2602);+#2602=AXIS2_PLACEMENT_3D('',#2603,#300,#13);+#2603=CARTESIAN_POINT('',(2.22,7.414276639233,0.410238158856));+#2604=ADVANCED_FACE('',(#2605),#2612,.T.);+#2605=FACE_BOUND('',#2606,.F.);+#2606=EDGE_LOOP('',(#2607,#2597,#2610,#2611));+#2607=ORIENTED_EDGE('',*,*,#2608,.T.);+#2608=EDGE_CURVE('',#2526,#2594,#2609,.T.);+#2609=LINE('',#2527,#299);+#2610=ORIENTED_EDGE('',*,*,#578,.F.);+#2611=ORIENTED_EDGE('',*,*,#2530,.F.);+#2612=CYLINDRICAL_SURFACE('',#2613,0.2);+#2613=AXIS2_PLACEMENT_3D('',#2490,#1265,#1316);+#2614=ADVANCED_FACE('',(#2615),#1244,.F.);+#2615=FACE_BOUND('',#2616,.F.);+#2616=EDGE_LOOP('',(#2540,#2617,#2621,#2625));+#2617=ORIENTED_EDGE('',*,*,#2618,.T.);+#2618=EDGE_CURVE('',#2542,#2619,#1238,.T.);+#2619=VERTEX_POINT('',#2620);+#2620=CARTESIAN_POINT('',(2.78,7.,0.75));+#2621=ORIENTED_EDGE('',*,*,#2622,.T.);+#2622=EDGE_CURVE('',#2619,#599,#2623,.T.);+#2623=LINE('',#2624,#1074);+#2624=CARTESIAN_POINT('',(2.78,7.,0.630119079428));+#2625=ORIENTED_EDGE('',*,*,#598,.F.);+#2626=ADVANCED_FACE('',(#2627),#2686,.F.);+#2627=FACE_BOUND('',#2628,.F.);+#2628=EDGE_LOOP('',(#2629,#2630,#2636,#2643,#2648,#2655,#2660,#2665,#2670,#2676,#2681,#2685));+#2629=ORIENTED_EDGE('',*,*,#2622,.F.);+#2630=ORIENTED_EDGE('',*,*,#2631,.T.);+#2631=EDGE_CURVE('',#2619,#2632,#2634,.T.);+#2632=VERTEX_POINT('',#2633);+#2633=CARTESIAN_POINT('',(2.78,7.2,0.75));+#2634=LINE('',#2635,#1256);+#2635=CARTESIAN_POINT('',(2.78,6.85,0.75));+#2636=ORIENTED_EDGE('',*,*,#2637,.T.);+#2637=EDGE_CURVE('',#2632,#2638,#2640,.T.);+#2638=VERTEX_POINT('',#2639);+#2639=CARTESIAN_POINT('',(2.78,7.298480775301,0.667364817767));+#2640=CIRCLE('',#2641,0.1);+#2641=AXIS2_PLACEMENT_3D('',#2642,#1265,#1266);+#2642=CARTESIAN_POINT('',(2.78,7.2,0.65));+#2643=ORIENTED_EDGE('',*,*,#2644,.T.);+#2644=EDGE_CURVE('',#2638,#2645,#2647,.T.);+#2645=VERTEX_POINT('',#2646);+#2646=CARTESIAN_POINT('',(2.78,7.382385590716,0.165270364467));+#2647=LINE('',#2639,#1272);+#2648=ORIENTED_EDGE('',*,*,#2649,.T.);+#2649=EDGE_CURVE('',#2645,#2650,#2652,.T.);+#2650=VERTEX_POINT('',#2651);+#2651=CARTESIAN_POINT('',(2.78,7.579347141319,1.387778780781E-16));+#2652=CIRCLE('',#2653,0.2);+#2653=AXIS2_PLACEMENT_3D('',#2654,#300,#1281);+#2654=CARTESIAN_POINT('',(2.78,7.579347141319,0.2));+#2655=ORIENTED_EDGE('',*,*,#2656,.T.);+#2656=EDGE_CURVE('',#2650,#2657,#2659,.T.);+#2657=VERTEX_POINT('',#2658);+#2658=CARTESIAN_POINT('',(2.78,8.,1.387778780781E-16));+#2659=LINE('',#2651,#1256);+#2660=ORIENTED_EDGE('',*,*,#2661,.T.);+#2661=EDGE_CURVE('',#2657,#2662,#2664,.T.);+#2662=VERTEX_POINT('',#2663);+#2663=CARTESIAN_POINT('',(2.78,8.,0.1));+#2664=LINE('',#2658,#1074);+#2665=ORIENTED_EDGE('',*,*,#2666,.T.);+#2666=EDGE_CURVE('',#2662,#2667,#2669,.T.);+#2667=VERTEX_POINT('',#2668);+#2668=CARTESIAN_POINT('',(2.78,7.579347141319,0.1));+#2669=LINE('',#2663,#255);+#2670=ORIENTED_EDGE('',*,*,#2671,.T.);+#2671=EDGE_CURVE('',#2667,#2672,#2674,.T.);+#2672=VERTEX_POINT('',#2673);+#2673=CARTESIAN_POINT('',(2.78,7.480866366018,0.182635182233));+#2674=CIRCLE('',#2675,1.E-01);+#2675=AXIS2_PLACEMENT_3D('',#2654,#1303,#1304);+#2676=ORIENTED_EDGE('',*,*,#2677,.T.);+#2677=EDGE_CURVE('',#2672,#2678,#2680,.T.);+#2678=VERTEX_POINT('',#2679);+#2679=CARTESIAN_POINT('',(2.78,7.396961550602,0.684729635533));+#2680=LINE('',#2673,#1310);+#2681=ORIENTED_EDGE('',*,*,#2682,.T.);+#2682=EDGE_CURVE('',#2678,#611,#2683,.T.);+#2683=CIRCLE('',#2684,0.2);+#2684=AXIS2_PLACEMENT_3D('',#2642,#14,#1316);+#2685=ORIENTED_EDGE('',*,*,#610,.T.);+#2686=PLANE('',#2687);+#2687=AXIS2_PLACEMENT_3D('',#2688,#300,#13);+#2688=CARTESIAN_POINT('',(2.78,7.414276639233,0.410238158856));+#2689=ADVANCED_FACE('',(#2690),#2753,.T.);+#2690=FACE_BOUND('',#2691,.T.);+#2691=EDGE_LOOP('',(#2692,#2698,#2704,#2711,#2716,#2723,#2728,#2733,#2738,#2744,#2749,#617));+#2692=ORIENTED_EDGE('',*,*,#2693,.F.);+#2693=EDGE_CURVE('',#2694,#619,#2696,.T.);+#2694=VERTEX_POINT('',#2695);+#2695=CARTESIAN_POINT('',(3.22,7.,0.75));+#2696=LINE('',#2697,#1074);+#2697=CARTESIAN_POINT('',(3.22,7.,0.630119079428));+#2698=ORIENTED_EDGE('',*,*,#2699,.T.);+#2699=EDGE_CURVE('',#2694,#2700,#2702,.T.);+#2700=VERTEX_POINT('',#2701);+#2701=CARTESIAN_POINT('',(3.22,7.2,0.75));+#2702=LINE('',#2703,#1256);+#2703=CARTESIAN_POINT('',(3.22,6.85,0.75));+#2704=ORIENTED_EDGE('',*,*,#2705,.T.);+#2705=EDGE_CURVE('',#2700,#2706,#2708,.T.);+#2706=VERTEX_POINT('',#2707);+#2707=CARTESIAN_POINT('',(3.22,7.298480775301,0.667364817767));+#2708=CIRCLE('',#2709,0.1);+#2709=AXIS2_PLACEMENT_3D('',#2710,#1265,#1266);+#2710=CARTESIAN_POINT('',(3.22,7.2,0.65));+#2711=ORIENTED_EDGE('',*,*,#2712,.T.);+#2712=EDGE_CURVE('',#2706,#2713,#2715,.T.);+#2713=VERTEX_POINT('',#2714);+#2714=CARTESIAN_POINT('',(3.22,7.382385590716,0.165270364467));+#2715=LINE('',#2707,#1272);+#2716=ORIENTED_EDGE('',*,*,#2717,.T.);+#2717=EDGE_CURVE('',#2713,#2718,#2720,.T.);+#2718=VERTEX_POINT('',#2719);+#2719=CARTESIAN_POINT('',(3.22,7.579347141319,1.387778780781E-16));+#2720=CIRCLE('',#2721,0.2);+#2721=AXIS2_PLACEMENT_3D('',#2722,#300,#1281);+#2722=CARTESIAN_POINT('',(3.22,7.579347141319,0.2));+#2723=ORIENTED_EDGE('',*,*,#2724,.T.);+#2724=EDGE_CURVE('',#2718,#2725,#2727,.T.);+#2725=VERTEX_POINT('',#2726);+#2726=CARTESIAN_POINT('',(3.22,8.,1.387778780781E-16));+#2727=LINE('',#2719,#1256);+#2728=ORIENTED_EDGE('',*,*,#2729,.T.);+#2729=EDGE_CURVE('',#2725,#2730,#2732,.T.);+#2730=VERTEX_POINT('',#2731);+#2731=CARTESIAN_POINT('',(3.22,8.,0.1));+#2732=LINE('',#2726,#1074);+#2733=ORIENTED_EDGE('',*,*,#2734,.T.);+#2734=EDGE_CURVE('',#2730,#2735,#2737,.T.);+#2735=VERTEX_POINT('',#2736);+#2736=CARTESIAN_POINT('',(3.22,7.579347141319,0.1));+#2737=LINE('',#2731,#255);+#2738=ORIENTED_EDGE('',*,*,#2739,.T.);+#2739=EDGE_CURVE('',#2735,#2740,#2742,.T.);+#2740=VERTEX_POINT('',#2741);+#2741=CARTESIAN_POINT('',(3.22,7.480866366018,0.182635182233));+#2742=CIRCLE('',#2743,1.E-01);+#2743=AXIS2_PLACEMENT_3D('',#2722,#1303,#1304);+#2744=ORIENTED_EDGE('',*,*,#2745,.T.);+#2745=EDGE_CURVE('',#2740,#2746,#2748,.T.);+#2746=VERTEX_POINT('',#2747);+#2747=CARTESIAN_POINT('',(3.22,7.396961550602,0.684729635533));+#2748=LINE('',#2741,#1310);+#2749=ORIENTED_EDGE('',*,*,#2750,.T.);+#2750=EDGE_CURVE('',#2746,#614,#2751,.T.);+#2751=CIRCLE('',#2752,0.2);+#2752=AXIS2_PLACEMENT_3D('',#2710,#14,#1316);+#2753=PLANE('',#2754);+#2754=AXIS2_PLACEMENT_3D('',#2755,#300,#13);+#2755=CARTESIAN_POINT('',(3.22,7.414276639233,0.410238158856));+#2756=ADVANCED_FACE('',(#2757),#2764,.T.);+#2757=FACE_BOUND('',#2758,.F.);+#2758=EDGE_LOOP('',(#2759,#2749,#2762,#2763));+#2759=ORIENTED_EDGE('',*,*,#2760,.T.);+#2760=EDGE_CURVE('',#2678,#2746,#2761,.T.);+#2761=LINE('',#2679,#299);+#2762=ORIENTED_EDGE('',*,*,#613,.F.);+#2763=ORIENTED_EDGE('',*,*,#2682,.F.);+#2764=CYLINDRICAL_SURFACE('',#2765,0.2);+#2765=AXIS2_PLACEMENT_3D('',#2642,#1265,#1316);+#2766=ADVANCED_FACE('',(#2767),#1244,.F.);+#2767=FACE_BOUND('',#2768,.F.);+#2768=EDGE_LOOP('',(#2692,#2769,#2773,#2777));+#2769=ORIENTED_EDGE('',*,*,#2770,.T.);+#2770=EDGE_CURVE('',#2694,#2771,#1238,.T.);+#2771=VERTEX_POINT('',#2772);+#2772=CARTESIAN_POINT('',(3.78,7.,0.75));+#2773=ORIENTED_EDGE('',*,*,#2774,.T.);+#2774=EDGE_CURVE('',#2771,#634,#2775,.T.);+#2775=LINE('',#2776,#1074);+#2776=CARTESIAN_POINT('',(3.78,7.,0.630119079428));+#2777=ORIENTED_EDGE('',*,*,#633,.F.);+#2778=ADVANCED_FACE('',(#2779),#2838,.F.);+#2779=FACE_BOUND('',#2780,.F.);+#2780=EDGE_LOOP('',(#2781,#2782,#2788,#2795,#2800,#2807,#2812,#2817,#2822,#2828,#2833,#2837));+#2781=ORIENTED_EDGE('',*,*,#2774,.F.);+#2782=ORIENTED_EDGE('',*,*,#2783,.T.);+#2783=EDGE_CURVE('',#2771,#2784,#2786,.T.);+#2784=VERTEX_POINT('',#2785);+#2785=CARTESIAN_POINT('',(3.78,7.2,0.75));+#2786=LINE('',#2787,#1256);+#2787=CARTESIAN_POINT('',(3.78,6.85,0.75));+#2788=ORIENTED_EDGE('',*,*,#2789,.T.);+#2789=EDGE_CURVE('',#2784,#2790,#2792,.T.);+#2790=VERTEX_POINT('',#2791);+#2791=CARTESIAN_POINT('',(3.78,7.298480775301,0.667364817767));+#2792=CIRCLE('',#2793,0.1);+#2793=AXIS2_PLACEMENT_3D('',#2794,#1265,#1266);+#2794=CARTESIAN_POINT('',(3.78,7.2,0.65));+#2795=ORIENTED_EDGE('',*,*,#2796,.T.);+#2796=EDGE_CURVE('',#2790,#2797,#2799,.T.);+#2797=VERTEX_POINT('',#2798);+#2798=CARTESIAN_POINT('',(3.78,7.382385590716,0.165270364467));+#2799=LINE('',#2791,#1272);+#2800=ORIENTED_EDGE('',*,*,#2801,.T.);+#2801=EDGE_CURVE('',#2797,#2802,#2804,.T.);+#2802=VERTEX_POINT('',#2803);+#2803=CARTESIAN_POINT('',(3.78,7.579347141319,1.387778780781E-16));+#2804=CIRCLE('',#2805,0.2);+#2805=AXIS2_PLACEMENT_3D('',#2806,#300,#1281);+#2806=CARTESIAN_POINT('',(3.78,7.579347141319,0.2));+#2807=ORIENTED_EDGE('',*,*,#2808,.T.);+#2808=EDGE_CURVE('',#2802,#2809,#2811,.T.);+#2809=VERTEX_POINT('',#2810);+#2810=CARTESIAN_POINT('',(3.78,8.,1.387778780781E-16));+#2811=LINE('',#2803,#1256);+#2812=ORIENTED_EDGE('',*,*,#2813,.T.);+#2813=EDGE_CURVE('',#2809,#2814,#2816,.T.);+#2814=VERTEX_POINT('',#2815);+#2815=CARTESIAN_POINT('',(3.78,8.,0.1));+#2816=LINE('',#2810,#1074);+#2817=ORIENTED_EDGE('',*,*,#2818,.T.);+#2818=EDGE_CURVE('',#2814,#2819,#2821,.T.);+#2819=VERTEX_POINT('',#2820);+#2820=CARTESIAN_POINT('',(3.78,7.579347141319,0.1));+#2821=LINE('',#2815,#255);+#2822=ORIENTED_EDGE('',*,*,#2823,.T.);+#2823=EDGE_CURVE('',#2819,#2824,#2826,.T.);+#2824=VERTEX_POINT('',#2825);+#2825=CARTESIAN_POINT('',(3.78,7.480866366018,0.182635182233));+#2826=CIRCLE('',#2827,1.E-01);+#2827=AXIS2_PLACEMENT_3D('',#2806,#1303,#1304);+#2828=ORIENTED_EDGE('',*,*,#2829,.T.);+#2829=EDGE_CURVE('',#2824,#2830,#2832,.T.);+#2830=VERTEX_POINT('',#2831);+#2831=CARTESIAN_POINT('',(3.78,7.396961550602,0.684729635533));+#2832=LINE('',#2825,#1310);+#2833=ORIENTED_EDGE('',*,*,#2834,.T.);+#2834=EDGE_CURVE('',#2830,#646,#2835,.T.);+#2835=CIRCLE('',#2836,0.2);+#2836=AXIS2_PLACEMENT_3D('',#2794,#14,#1316);+#2837=ORIENTED_EDGE('',*,*,#645,.T.);+#2838=PLANE('',#2839);+#2839=AXIS2_PLACEMENT_3D('',#2840,#300,#13);+#2840=CARTESIAN_POINT('',(3.78,7.414276639233,0.410238158856));+#2841=ADVANCED_FACE('',(#2842),#2905,.T.);+#2842=FACE_BOUND('',#2843,.T.);+#2843=EDGE_LOOP('',(#2844,#2850,#2856,#2863,#2868,#2875,#2880,#2885,#2890,#2896,#2901,#652));+#2844=ORIENTED_EDGE('',*,*,#2845,.F.);+#2845=EDGE_CURVE('',#2846,#654,#2848,.T.);+#2846=VERTEX_POINT('',#2847);+#2847=CARTESIAN_POINT('',(4.22,7.,0.75));+#2848=LINE('',#2849,#1074);+#2849=CARTESIAN_POINT('',(4.22,7.,0.630119079428));+#2850=ORIENTED_EDGE('',*,*,#2851,.T.);+#2851=EDGE_CURVE('',#2846,#2852,#2854,.T.);+#2852=VERTEX_POINT('',#2853);+#2853=CARTESIAN_POINT('',(4.22,7.2,0.75));+#2854=LINE('',#2855,#1256);+#2855=CARTESIAN_POINT('',(4.22,6.85,0.75));+#2856=ORIENTED_EDGE('',*,*,#2857,.T.);+#2857=EDGE_CURVE('',#2852,#2858,#2860,.T.);+#2858=VERTEX_POINT('',#2859);+#2859=CARTESIAN_POINT('',(4.22,7.298480775301,0.667364817767));+#2860=CIRCLE('',#2861,0.1);+#2861=AXIS2_PLACEMENT_3D('',#2862,#1265,#1266);+#2862=CARTESIAN_POINT('',(4.22,7.2,0.65));+#2863=ORIENTED_EDGE('',*,*,#2864,.T.);+#2864=EDGE_CURVE('',#2858,#2865,#2867,.T.);+#2865=VERTEX_POINT('',#2866);+#2866=CARTESIAN_POINT('',(4.22,7.382385590716,0.165270364467));+#2867=LINE('',#2859,#1272);+#2868=ORIENTED_EDGE('',*,*,#2869,.T.);+#2869=EDGE_CURVE('',#2865,#2870,#2872,.T.);+#2870=VERTEX_POINT('',#2871);+#2871=CARTESIAN_POINT('',(4.22,7.579347141319,1.387778780781E-16));+#2872=CIRCLE('',#2873,0.2);+#2873=AXIS2_PLACEMENT_3D('',#2874,#300,#1281);+#2874=CARTESIAN_POINT('',(4.22,7.579347141319,0.2));+#2875=ORIENTED_EDGE('',*,*,#2876,.T.);+#2876=EDGE_CURVE('',#2870,#2877,#2879,.T.);+#2877=VERTEX_POINT('',#2878);+#2878=CARTESIAN_POINT('',(4.22,8.,1.387778780781E-16));+#2879=LINE('',#2871,#1256);+#2880=ORIENTED_EDGE('',*,*,#2881,.T.);+#2881=EDGE_CURVE('',#2877,#2882,#2884,.T.);+#2882=VERTEX_POINT('',#2883);+#2883=CARTESIAN_POINT('',(4.22,8.,0.1));+#2884=LINE('',#2878,#1074);+#2885=ORIENTED_EDGE('',*,*,#2886,.T.);+#2886=EDGE_CURVE('',#2882,#2887,#2889,.T.);+#2887=VERTEX_POINT('',#2888);+#2888=CARTESIAN_POINT('',(4.22,7.579347141319,0.1));+#2889=LINE('',#2883,#255);+#2890=ORIENTED_EDGE('',*,*,#2891,.T.);+#2891=EDGE_CURVE('',#2887,#2892,#2894,.T.);+#2892=VERTEX_POINT('',#2893);+#2893=CARTESIAN_POINT('',(4.22,7.480866366018,0.182635182233));+#2894=CIRCLE('',#2895,1.E-01);+#2895=AXIS2_PLACEMENT_3D('',#2874,#1303,#1304);+#2896=ORIENTED_EDGE('',*,*,#2897,.T.);+#2897=EDGE_CURVE('',#2892,#2898,#2900,.T.);+#2898=VERTEX_POINT('',#2899);+#2899=CARTESIAN_POINT('',(4.22,7.396961550602,0.684729635533));+#2900=LINE('',#2893,#1310);+#2901=ORIENTED_EDGE('',*,*,#2902,.T.);+#2902=EDGE_CURVE('',#2898,#649,#2903,.T.);+#2903=CIRCLE('',#2904,0.2);+#2904=AXIS2_PLACEMENT_3D('',#2862,#14,#1316);+#2905=PLANE('',#2906);+#2906=AXIS2_PLACEMENT_3D('',#2907,#300,#13);+#2907=CARTESIAN_POINT('',(4.22,7.414276639233,0.410238158856));+#2908=ADVANCED_FACE('',(#2909),#2916,.T.);+#2909=FACE_BOUND('',#2910,.F.);+#2910=EDGE_LOOP('',(#2911,#2901,#2914,#2915));+#2911=ORIENTED_EDGE('',*,*,#2912,.T.);+#2912=EDGE_CURVE('',#2830,#2898,#2913,.T.);+#2913=LINE('',#2831,#299);+#2914=ORIENTED_EDGE('',*,*,#648,.F.);+#2915=ORIENTED_EDGE('',*,*,#2834,.F.);+#2916=CYLINDRICAL_SURFACE('',#2917,0.2);+#2917=AXIS2_PLACEMENT_3D('',#2794,#1265,#1316);+#2918=ADVANCED_FACE('',(#2919),#1244,.F.);+#2919=FACE_BOUND('',#2920,.F.);+#2920=EDGE_LOOP('',(#2844,#2921,#2925,#2929));+#2921=ORIENTED_EDGE('',*,*,#2922,.T.);+#2922=EDGE_CURVE('',#2846,#2923,#1238,.T.);+#2923=VERTEX_POINT('',#2924);+#2924=CARTESIAN_POINT('',(4.78,7.,0.75));+#2925=ORIENTED_EDGE('',*,*,#2926,.T.);+#2926=EDGE_CURVE('',#2923,#669,#2927,.T.);+#2927=LINE('',#2928,#1074);+#2928=CARTESIAN_POINT('',(4.78,7.,0.630119079428));+#2929=ORIENTED_EDGE('',*,*,#668,.F.);+#2930=ADVANCED_FACE('',(#2931),#2990,.F.);+#2931=FACE_BOUND('',#2932,.F.);+#2932=EDGE_LOOP('',(#2933,#2934,#2940,#2947,#2952,#2959,#2964,#2969,#2974,#2980,#2985,#2989));+#2933=ORIENTED_EDGE('',*,*,#2926,.F.);+#2934=ORIENTED_EDGE('',*,*,#2935,.T.);+#2935=EDGE_CURVE('',#2923,#2936,#2938,.T.);+#2936=VERTEX_POINT('',#2937);+#2937=CARTESIAN_POINT('',(4.78,7.2,0.75));+#2938=LINE('',#2939,#1256);+#2939=CARTESIAN_POINT('',(4.78,6.85,0.75));+#2940=ORIENTED_EDGE('',*,*,#2941,.T.);+#2941=EDGE_CURVE('',#2936,#2942,#2944,.T.);+#2942=VERTEX_POINT('',#2943);+#2943=CARTESIAN_POINT('',(4.78,7.298480775301,0.667364817767));+#2944=CIRCLE('',#2945,0.1);+#2945=AXIS2_PLACEMENT_3D('',#2946,#1265,#1266);+#2946=CARTESIAN_POINT('',(4.78,7.2,0.65));+#2947=ORIENTED_EDGE('',*,*,#2948,.T.);+#2948=EDGE_CURVE('',#2942,#2949,#2951,.T.);+#2949=VERTEX_POINT('',#2950);+#2950=CARTESIAN_POINT('',(4.78,7.382385590716,0.165270364467));+#2951=LINE('',#2943,#1272);+#2952=ORIENTED_EDGE('',*,*,#2953,.T.);+#2953=EDGE_CURVE('',#2949,#2954,#2956,.T.);+#2954=VERTEX_POINT('',#2955);+#2955=CARTESIAN_POINT('',(4.78,7.579347141319,1.387778780781E-16));+#2956=CIRCLE('',#2957,0.2);+#2957=AXIS2_PLACEMENT_3D('',#2958,#300,#1281);+#2958=CARTESIAN_POINT('',(4.78,7.579347141319,0.2));+#2959=ORIENTED_EDGE('',*,*,#2960,.T.);+#2960=EDGE_CURVE('',#2954,#2961,#2963,.T.);+#2961=VERTEX_POINT('',#2962);+#2962=CARTESIAN_POINT('',(4.78,8.,1.387778780781E-16));+#2963=LINE('',#2955,#1256);+#2964=ORIENTED_EDGE('',*,*,#2965,.T.);+#2965=EDGE_CURVE('',#2961,#2966,#2968,.T.);+#2966=VERTEX_POINT('',#2967);+#2967=CARTESIAN_POINT('',(4.78,8.,0.1));+#2968=LINE('',#2962,#1074);+#2969=ORIENTED_EDGE('',*,*,#2970,.T.);+#2970=EDGE_CURVE('',#2966,#2971,#2973,.T.);+#2971=VERTEX_POINT('',#2972);+#2972=CARTESIAN_POINT('',(4.78,7.579347141319,0.1));+#2973=LINE('',#2967,#255);+#2974=ORIENTED_EDGE('',*,*,#2975,.T.);+#2975=EDGE_CURVE('',#2971,#2976,#2978,.T.);+#2976=VERTEX_POINT('',#2977);+#2977=CARTESIAN_POINT('',(4.78,7.480866366018,0.182635182233));+#2978=CIRCLE('',#2979,1.E-01);+#2979=AXIS2_PLACEMENT_3D('',#2958,#1303,#1304);+#2980=ORIENTED_EDGE('',*,*,#2981,.T.);+#2981=EDGE_CURVE('',#2976,#2982,#2984,.T.);+#2982=VERTEX_POINT('',#2983);+#2983=CARTESIAN_POINT('',(4.78,7.396961550602,0.684729635533));+#2984=LINE('',#2977,#1310);+#2985=ORIENTED_EDGE('',*,*,#2986,.T.);+#2986=EDGE_CURVE('',#2982,#681,#2987,.T.);+#2987=CIRCLE('',#2988,0.2);+#2988=AXIS2_PLACEMENT_3D('',#2946,#14,#1316);+#2989=ORIENTED_EDGE('',*,*,#680,.T.);+#2990=PLANE('',#2991);+#2991=AXIS2_PLACEMENT_3D('',#2992,#300,#13);+#2992=CARTESIAN_POINT('',(4.78,7.414276639233,0.410238158856));+#2993=ADVANCED_FACE('',(#2994),#3057,.T.);+#2994=FACE_BOUND('',#2995,.T.);+#2995=EDGE_LOOP('',(#2996,#3002,#3008,#3015,#3020,#3027,#3032,#3037,#3042,#3048,#3053,#687));+#2996=ORIENTED_EDGE('',*,*,#2997,.F.);+#2997=EDGE_CURVE('',#2998,#689,#3000,.T.);+#2998=VERTEX_POINT('',#2999);+#2999=CARTESIAN_POINT('',(5.22,7.,0.75));+#3000=LINE('',#3001,#1074);+#3001=CARTESIAN_POINT('',(5.22,7.,0.630119079428));+#3002=ORIENTED_EDGE('',*,*,#3003,.T.);+#3003=EDGE_CURVE('',#2998,#3004,#3006,.T.);+#3004=VERTEX_POINT('',#3005);+#3005=CARTESIAN_POINT('',(5.22,7.2,0.75));+#3006=LINE('',#3007,#1256);+#3007=CARTESIAN_POINT('',(5.22,6.85,0.75));+#3008=ORIENTED_EDGE('',*,*,#3009,.T.);+#3009=EDGE_CURVE('',#3004,#3010,#3012,.T.);+#3010=VERTEX_POINT('',#3011);+#3011=CARTESIAN_POINT('',(5.22,7.298480775301,0.667364817767));+#3012=CIRCLE('',#3013,0.1);+#3013=AXIS2_PLACEMENT_3D('',#3014,#1265,#1266);+#3014=CARTESIAN_POINT('',(5.22,7.2,0.65));+#3015=ORIENTED_EDGE('',*,*,#3016,.T.);+#3016=EDGE_CURVE('',#3010,#3017,#3019,.T.);+#3017=VERTEX_POINT('',#3018);+#3018=CARTESIAN_POINT('',(5.22,7.382385590716,0.165270364467));+#3019=LINE('',#3011,#1272);+#3020=ORIENTED_EDGE('',*,*,#3021,.T.);+#3021=EDGE_CURVE('',#3017,#3022,#3024,.T.);+#3022=VERTEX_POINT('',#3023);+#3023=CARTESIAN_POINT('',(5.22,7.579347141319,1.387778780781E-16));+#3024=CIRCLE('',#3025,0.2);+#3025=AXIS2_PLACEMENT_3D('',#3026,#300,#1281);+#3026=CARTESIAN_POINT('',(5.22,7.579347141319,0.2));+#3027=ORIENTED_EDGE('',*,*,#3028,.T.);+#3028=EDGE_CURVE('',#3022,#3029,#3031,.T.);+#3029=VERTEX_POINT('',#3030);+#3030=CARTESIAN_POINT('',(5.22,8.,1.387778780781E-16));+#3031=LINE('',#3023,#1256);+#3032=ORIENTED_EDGE('',*,*,#3033,.T.);+#3033=EDGE_CURVE('',#3029,#3034,#3036,.T.);+#3034=VERTEX_POINT('',#3035);+#3035=CARTESIAN_POINT('',(5.22,8.,0.1));+#3036=LINE('',#3030,#1074);+#3037=ORIENTED_EDGE('',*,*,#3038,.T.);+#3038=EDGE_CURVE('',#3034,#3039,#3041,.T.);+#3039=VERTEX_POINT('',#3040);+#3040=CARTESIAN_POINT('',(5.22,7.579347141319,0.1));+#3041=LINE('',#3035,#255);+#3042=ORIENTED_EDGE('',*,*,#3043,.T.);+#3043=EDGE_CURVE('',#3039,#3044,#3046,.T.);+#3044=VERTEX_POINT('',#3045);+#3045=CARTESIAN_POINT('',(5.22,7.480866366018,0.182635182233));+#3046=CIRCLE('',#3047,1.E-01);+#3047=AXIS2_PLACEMENT_3D('',#3026,#1303,#1304);+#3048=ORIENTED_EDGE('',*,*,#3049,.T.);+#3049=EDGE_CURVE('',#3044,#3050,#3052,.T.);+#3050=VERTEX_POINT('',#3051);+#3051=CARTESIAN_POINT('',(5.22,7.396961550602,0.684729635533));+#3052=LINE('',#3045,#1310);+#3053=ORIENTED_EDGE('',*,*,#3054,.T.);+#3054=EDGE_CURVE('',#3050,#684,#3055,.T.);+#3055=CIRCLE('',#3056,0.2);+#3056=AXIS2_PLACEMENT_3D('',#3014,#14,#1316);+#3057=PLANE('',#3058);+#3058=AXIS2_PLACEMENT_3D('',#3059,#300,#13);+#3059=CARTESIAN_POINT('',(5.22,7.414276639233,0.410238158856));+#3060=ADVANCED_FACE('',(#3061),#3068,.T.);+#3061=FACE_BOUND('',#3062,.F.);+#3062=EDGE_LOOP('',(#3063,#3053,#3066,#3067));+#3063=ORIENTED_EDGE('',*,*,#3064,.T.);+#3064=EDGE_CURVE('',#2982,#3050,#3065,.T.);+#3065=LINE('',#2983,#299);+#3066=ORIENTED_EDGE('',*,*,#683,.F.);+#3067=ORIENTED_EDGE('',*,*,#2986,.F.);+#3068=CYLINDRICAL_SURFACE('',#3069,0.2);+#3069=AXIS2_PLACEMENT_3D('',#2946,#1265,#1316);+#3070=ADVANCED_FACE('',(#3071),#1244,.F.);+#3071=FACE_BOUND('',#3072,.F.);+#3072=EDGE_LOOP('',(#2996,#3073,#3077,#3081));+#3073=ORIENTED_EDGE('',*,*,#3074,.T.);+#3074=EDGE_CURVE('',#2998,#3075,#1238,.T.);+#3075=VERTEX_POINT('',#3076);+#3076=CARTESIAN_POINT('',(5.78,7.,0.75));+#3077=ORIENTED_EDGE('',*,*,#3078,.T.);+#3078=EDGE_CURVE('',#3075,#704,#3079,.T.);+#3079=LINE('',#3080,#1074);+#3080=CARTESIAN_POINT('',(5.78,7.,0.630119079428));+#3081=ORIENTED_EDGE('',*,*,#703,.F.);+#3082=ADVANCED_FACE('',(#3083),#3142,.F.);+#3083=FACE_BOUND('',#3084,.F.);+#3084=EDGE_LOOP('',(#3085,#3086,#3092,#3099,#3104,#3111,#3116,#3121,#3126,#3132,#3137,#3141));+#3085=ORIENTED_EDGE('',*,*,#3078,.F.);+#3086=ORIENTED_EDGE('',*,*,#3087,.T.);+#3087=EDGE_CURVE('',#3075,#3088,#3090,.T.);+#3088=VERTEX_POINT('',#3089);+#3089=CARTESIAN_POINT('',(5.78,7.2,0.75));+#3090=LINE('',#3091,#1256);+#3091=CARTESIAN_POINT('',(5.78,6.85,0.75));+#3092=ORIENTED_EDGE('',*,*,#3093,.T.);+#3093=EDGE_CURVE('',#3088,#3094,#3096,.T.);+#3094=VERTEX_POINT('',#3095);+#3095=CARTESIAN_POINT('',(5.78,7.298480775301,0.667364817767));+#3096=CIRCLE('',#3097,0.1);+#3097=AXIS2_PLACEMENT_3D('',#3098,#1265,#1266);+#3098=CARTESIAN_POINT('',(5.78,7.2,0.65));+#3099=ORIENTED_EDGE('',*,*,#3100,.T.);+#3100=EDGE_CURVE('',#3094,#3101,#3103,.T.);+#3101=VERTEX_POINT('',#3102);+#3102=CARTESIAN_POINT('',(5.78,7.382385590716,0.165270364467));+#3103=LINE('',#3095,#1272);+#3104=ORIENTED_EDGE('',*,*,#3105,.T.);+#3105=EDGE_CURVE('',#3101,#3106,#3108,.T.);+#3106=VERTEX_POINT('',#3107);+#3107=CARTESIAN_POINT('',(5.78,7.579347141319,1.387778780781E-16));+#3108=CIRCLE('',#3109,0.2);+#3109=AXIS2_PLACEMENT_3D('',#3110,#300,#1281);+#3110=CARTESIAN_POINT('',(5.78,7.579347141319,0.2));+#3111=ORIENTED_EDGE('',*,*,#3112,.T.);+#3112=EDGE_CURVE('',#3106,#3113,#3115,.T.);+#3113=VERTEX_POINT('',#3114);+#3114=CARTESIAN_POINT('',(5.78,8.,1.387778780781E-16));+#3115=LINE('',#3107,#1256);+#3116=ORIENTED_EDGE('',*,*,#3117,.T.);+#3117=EDGE_CURVE('',#3113,#3118,#3120,.T.);+#3118=VERTEX_POINT('',#3119);+#3119=CARTESIAN_POINT('',(5.78,8.,0.1));+#3120=LINE('',#3114,#1074);+#3121=ORIENTED_EDGE('',*,*,#3122,.T.);+#3122=EDGE_CURVE('',#3118,#3123,#3125,.T.);+#3123=VERTEX_POINT('',#3124);+#3124=CARTESIAN_POINT('',(5.78,7.579347141319,0.1));+#3125=LINE('',#3119,#255);+#3126=ORIENTED_EDGE('',*,*,#3127,.T.);+#3127=EDGE_CURVE('',#3123,#3128,#3130,.T.);+#3128=VERTEX_POINT('',#3129);+#3129=CARTESIAN_POINT('',(5.78,7.480866366018,0.182635182233));+#3130=CIRCLE('',#3131,1.E-01);+#3131=AXIS2_PLACEMENT_3D('',#3110,#1303,#1304);+#3132=ORIENTED_EDGE('',*,*,#3133,.T.);+#3133=EDGE_CURVE('',#3128,#3134,#3136,.T.);+#3134=VERTEX_POINT('',#3135);+#3135=CARTESIAN_POINT('',(5.78,7.396961550602,0.684729635533));+#3136=LINE('',#3129,#1310);+#3137=ORIENTED_EDGE('',*,*,#3138,.T.);+#3138=EDGE_CURVE('',#3134,#716,#3139,.T.);+#3139=CIRCLE('',#3140,0.2);+#3140=AXIS2_PLACEMENT_3D('',#3098,#14,#1316);+#3141=ORIENTED_EDGE('',*,*,#715,.T.);+#3142=PLANE('',#3143);+#3143=AXIS2_PLACEMENT_3D('',#3144,#300,#13);+#3144=CARTESIAN_POINT('',(5.78,7.414276639233,0.410238158856));+#3145=ADVANCED_FACE('',(#3146),#3209,.T.);+#3146=FACE_BOUND('',#3147,.T.);+#3147=EDGE_LOOP('',(#3148,#3154,#3160,#3167,#3172,#3179,#3184,#3189,#3194,#3200,#3205,#722));+#3148=ORIENTED_EDGE('',*,*,#3149,.F.);+#3149=EDGE_CURVE('',#3150,#724,#3152,.T.);+#3150=VERTEX_POINT('',#3151);+#3151=CARTESIAN_POINT('',(6.22,7.,0.75));+#3152=LINE('',#3153,#1074);+#3153=CARTESIAN_POINT('',(6.22,7.,0.630119079428));+#3154=ORIENTED_EDGE('',*,*,#3155,.T.);+#3155=EDGE_CURVE('',#3150,#3156,#3158,.T.);+#3156=VERTEX_POINT('',#3157);+#3157=CARTESIAN_POINT('',(6.22,7.2,0.75));+#3158=LINE('',#3159,#1256);+#3159=CARTESIAN_POINT('',(6.22,6.85,0.75));+#3160=ORIENTED_EDGE('',*,*,#3161,.T.);+#3161=EDGE_CURVE('',#3156,#3162,#3164,.T.);+#3162=VERTEX_POINT('',#3163);+#3163=CARTESIAN_POINT('',(6.22,7.298480775301,0.667364817767));+#3164=CIRCLE('',#3165,0.1);+#3165=AXIS2_PLACEMENT_3D('',#3166,#1265,#1266);+#3166=CARTESIAN_POINT('',(6.22,7.2,0.65));+#3167=ORIENTED_EDGE('',*,*,#3168,.T.);+#3168=EDGE_CURVE('',#3162,#3169,#3171,.T.);+#3169=VERTEX_POINT('',#3170);+#3170=CARTESIAN_POINT('',(6.22,7.382385590716,0.165270364467));+#3171=LINE('',#3163,#1272);+#3172=ORIENTED_EDGE('',*,*,#3173,.T.);+#3173=EDGE_CURVE('',#3169,#3174,#3176,.T.);+#3174=VERTEX_POINT('',#3175);+#3175=CARTESIAN_POINT('',(6.22,7.579347141319,1.387778780781E-16));+#3176=CIRCLE('',#3177,0.2);+#3177=AXIS2_PLACEMENT_3D('',#3178,#300,#1281);+#3178=CARTESIAN_POINT('',(6.22,7.579347141319,0.2));+#3179=ORIENTED_EDGE('',*,*,#3180,.T.);+#3180=EDGE_CURVE('',#3174,#3181,#3183,.T.);+#3181=VERTEX_POINT('',#3182);+#3182=CARTESIAN_POINT('',(6.22,8.,1.387778780781E-16));+#3183=LINE('',#3175,#1256);+#3184=ORIENTED_EDGE('',*,*,#3185,.T.);+#3185=EDGE_CURVE('',#3181,#3186,#3188,.T.);+#3186=VERTEX_POINT('',#3187);+#3187=CARTESIAN_POINT('',(6.22,8.,0.1));+#3188=LINE('',#3182,#1074);+#3189=ORIENTED_EDGE('',*,*,#3190,.T.);+#3190=EDGE_CURVE('',#3186,#3191,#3193,.T.);+#3191=VERTEX_POINT('',#3192);+#3192=CARTESIAN_POINT('',(6.22,7.579347141319,0.1));+#3193=LINE('',#3187,#255);+#3194=ORIENTED_EDGE('',*,*,#3195,.T.);+#3195=EDGE_CURVE('',#3191,#3196,#3198,.T.);+#3196=VERTEX_POINT('',#3197);+#3197=CARTESIAN_POINT('',(6.22,7.480866366018,0.182635182233));+#3198=CIRCLE('',#3199,1.E-01);+#3199=AXIS2_PLACEMENT_3D('',#3178,#1303,#1304);+#3200=ORIENTED_EDGE('',*,*,#3201,.T.);+#3201=EDGE_CURVE('',#3196,#3202,#3204,.T.);+#3202=VERTEX_POINT('',#3203);+#3203=CARTESIAN_POINT('',(6.22,7.396961550602,0.684729635533));+#3204=LINE('',#3197,#1310);+#3205=ORIENTED_EDGE('',*,*,#3206,.T.);+#3206=EDGE_CURVE('',#3202,#719,#3207,.T.);+#3207=CIRCLE('',#3208,0.2);+#3208=AXIS2_PLACEMENT_3D('',#3166,#14,#1316);+#3209=PLANE('',#3210);+#3210=AXIS2_PLACEMENT_3D('',#3211,#300,#13);+#3211=CARTESIAN_POINT('',(6.22,7.414276639233,0.410238158856));+#3212=ADVANCED_FACE('',(#3213),#3220,.T.);+#3213=FACE_BOUND('',#3214,.F.);+#3214=EDGE_LOOP('',(#3215,#3205,#3218,#3219));+#3215=ORIENTED_EDGE('',*,*,#3216,.T.);+#3216=EDGE_CURVE('',#3134,#3202,#3217,.T.);+#3217=LINE('',#3135,#299);+#3218=ORIENTED_EDGE('',*,*,#718,.F.);+#3219=ORIENTED_EDGE('',*,*,#3138,.F.);+#3220=CYLINDRICAL_SURFACE('',#3221,0.2);+#3221=AXIS2_PLACEMENT_3D('',#3098,#1265,#1316);+#3222=ADVANCED_FACE('',(#3223),#3242,.F.);+#3223=FACE_BOUND('',#3224,.F.);+#3224=EDGE_LOOP('',(#3225,#3228,#3233,#3238,#3240,#3241));+#3225=ORIENTED_EDGE('',*,*,#3226,.F.);+#3226=EDGE_CURVE('',#3227,#748,#757,.T.);+#3227=VERTEX_POINT('',#758);+#3228=ORIENTED_EDGE('',*,*,#3229,.T.);+#3229=EDGE_CURVE('',#3227,#3230,#3232,.T.);+#3230=VERTEX_POINT('',#3231);+#3231=CARTESIAN_POINT('',(7.2,5.78,0.85));+#3232=LINE('',#758,#751);+#3233=ORIENTED_EDGE('',*,*,#3234,.T.);+#3234=EDGE_CURVE('',#3230,#3235,#3237,.T.);+#3235=VERTEX_POINT('',#3236);+#3236=CARTESIAN_POINT('',(7.,5.78,0.85));+#3237=LINE('',#3231,#759);+#3238=ORIENTED_EDGE('',*,*,#3239,.T.);+#3239=EDGE_CURVE('',#3235,#809,#3237,.T.);+#3240=ORIENTED_EDGE('',*,*,#808,.F.);+#3241=ORIENTED_EDGE('',*,*,#754,.F.);+#3242=PLANE('',#3243);+#3243=AXIS2_PLACEMENT_3D('',#758,#312,#760);+#3244=ADVANCED_FACE('',(#3245),#3262,.F.);+#3245=FACE_BOUND('',#3246,.F.);+#3246=EDGE_LOOP('',(#3247,#3252,#3257,#3261));+#3247=ORIENTED_EDGE('',*,*,#3248,.F.);+#3248=EDGE_CURVE('',#3249,#743,#3251,.T.);+#3249=VERTEX_POINT('',#3250);+#3250=CARTESIAN_POINT('',(7.,6.825,0.75));+#3251=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3250,#744),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3252=ORIENTED_EDGE('',*,*,#3253,.T.);+#3253=EDGE_CURVE('',#3249,#3254,#3256,.T.);+#3254=VERTEX_POINT('',#3255);+#3255=CARTESIAN_POINT('',(7.,6.22,0.75));+#3256=LINE('',#3250,#751);+#3257=ORIENTED_EDGE('',*,*,#3258,.T.);+#3258=EDGE_CURVE('',#3254,#748,#3259,.T.);+#3259=LINE('',#3260,#1074);+#3260=CARTESIAN_POINT('',(7.,6.22,0.630119079428));+#3261=ORIENTED_EDGE('',*,*,#747,.F.);+#3262=PLANE('',#3263);+#3263=AXIS2_PLACEMENT_3D('',#744,#760,#752);+#3264=ADVANCED_FACE('',(#3265),#3277,.F.);+#3265=FACE_BOUND('',#3266,.F.);+#3266=EDGE_LOOP('',(#3267,#3272,#3273,#3274));+#3267=ORIENTED_EDGE('',*,*,#3268,.T.);+#3268=EDGE_CURVE('',#3269,#3249,#3271,.T.);+#3269=VERTEX_POINT('',#3270);+#3270=CARTESIAN_POINT('',(6.825,7.,0.75));+#3271=LINE('',#3270,#177);+#3272=ORIENTED_EDGE('',*,*,#3248,.T.);+#3273=ORIENTED_EDGE('',*,*,#742,.F.);+#3274=ORIENTED_EDGE('',*,*,#3275,.F.);+#3275=EDGE_CURVE('',#3269,#739,#3276,.T.);+#3276=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3270,#740),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3277=PLANE('',#3278);+#3278=AXIS2_PLACEMENT_3D('',#740,#3279,#178);+#3279=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#3280=ADVANCED_FACE('',(#3281),#1244,.F.);+#3281=FACE_BOUND('',#3282,.F.);+#3282=EDGE_LOOP('',(#3148,#3283,#3285,#3286));+#3283=ORIENTED_EDGE('',*,*,#3284,.T.);+#3284=EDGE_CURVE('',#3150,#3269,#1238,.T.);+#3285=ORIENTED_EDGE('',*,*,#3275,.T.);+#3286=ORIENTED_EDGE('',*,*,#738,.F.);+#3287=ADVANCED_FACE('',(#3288),#3311,.F.);+#3288=FACE_BOUND('',#3289,.F.);+#3289=EDGE_LOOP('',(#3290,#3298,#3306,#3307));+#3290=ORIENTED_EDGE('',*,*,#3291,.T.);+#3291=EDGE_CURVE('',#3292,#3294,#3296,.T.);+#3292=VERTEX_POINT('',#3293);+#3293=CARTESIAN_POINT('',(6.7875,-6.925,0.85));+#3294=VERTEX_POINT('',#3295);+#3295=CARTESIAN_POINT('',(6.722564340983,-6.795128681966,1.460996513181));+#3296=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3293,#3297),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3297=CARTESIAN_POINT('',(6.718419117457,-6.786838234914,1.5));+#3298=ORIENTED_EDGE('',*,*,#3299,.F.);+#3299=EDGE_CURVE('',#793,#3294,#3300,.T.);+#3300=B_SPLINE_CURVE_WITH_KNOTS('',2,(#3301,#3302,#3303,#3304,#3305),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#3301=CARTESIAN_POINT('',(6.997865034984,-6.519827987965,1.460996513181));+#3302=CARTESIAN_POINT('',(6.909596477286,-6.608096545662,1.460996513181));+#3303=CARTESIAN_POINT('',(6.758846511474,-6.758846511474,1.460996513181));+#3304=CARTESIAN_POINT('',(6.608096545662,-6.909596477286,1.460996513181));+#3305=CARTESIAN_POINT('',(6.519827987965,-6.997865034984,1.460996513181));+#3306=ORIENTED_EDGE('',*,*,#790,.F.);+#3307=ORIENTED_EDGE('',*,*,#3308,.T.);+#3308=EDGE_CURVE('',#791,#3292,#3309,.T.);+#3309=LINE('',#792,#3310);+#3310=VECTOR('',#3279,1.);+#3311=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#792,#796),(#3293,#3297)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3312=ADVANCED_FACE('',(#3313),#3334,.T.);+#3313=FACE_BOUND('',#3314,.T.);+#3314=EDGE_LOOP('',(#3315,#3316,#3317,#797));+#3315=ORIENTED_EDGE('',*,*,#925,.T.);+#3316=ORIENTED_EDGE('',*,*,#1025,.T.);+#3317=ORIENTED_EDGE('',*,*,#3318,.F.);+#3318=EDGE_CURVE('',#793,#1016,#3319,.T.);+#3319=B_SPLINE_CURVE_WITH_KNOTS('',7,(#3320,#3321,#3322,#3323,#3324,#3325,#3326,#3327,#3328,#3329,#3330,#3331,#3332,#3333),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.29066362524,1.),.UNSPECIFIED.);+#3320=CARTESIAN_POINT('',(6.795124813083,-6.722568209866,1.460996513181));+#3321=CARTESIAN_POINT('',(6.794553244516,-6.722331458413,1.463531744317));+#3322=CARTESIAN_POINT('',(6.793815945073,-6.722026058984,1.46608564657));+#3323=CARTESIAN_POINT('',(6.792904444573,-6.721648503115,1.468641015865));+#3324=CARTESIAN_POINT('',(6.791813200741,-6.72119649512,1.471177624923));+#3325=CARTESIAN_POINT('',(6.790540311211,-6.720669247014,1.473673405584));+#3326=CARTESIAN_POINT('',(6.789088225532,-6.720067773432,1.476105631134));+#3327=CARTESIAN_POINT('',(6.783501808038,-6.71775380354,1.484178424866));+#3328=CARTESIAN_POINT('',(6.778516388407,-6.715688775078,1.489393835253));+#3329=CARTESIAN_POINT('',(6.772614942935,-6.713244316498,1.493781041797));+#3330=CARTESIAN_POINT('',(6.76606517067,-6.710531311634,1.497036468734));+#3331=CARTESIAN_POINT('',(6.759308791872,-6.707732728348,1.499068462587));+#3332=CARTESIAN_POINT('',(6.752663910709,-6.704980328107,1.500000203951));+#3333=CARTESIAN_POINT('',(6.746349033255,-6.702364620385,1.5));+#3334=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#800,#801,#802,#803,#804),(#3335,#3336,#3337,#3338,#3339),(#1027,#1028,#1029,#1030,#1031)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,13.517816638234),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#3335=CARTESIAN_POINT('',(6.786838234914,7.416775919098,1.5));+#3336=CARTESIAN_POINT('',(6.786838234914,7.087842119108,1.5));+#3337=CARTESIAN_POINT('',(6.786838234914,1.324926446165E-15,1.5));+#3338=CARTESIAN_POINT('',(6.786838234914,-7.087842119108,1.5));+#3339=CARTESIAN_POINT('',(6.786838234914,-7.416775919098,1.5));+#3340=ADVANCED_FACE('',(#3341),#283,.F.);+#3341=FACE_BOUND('',#3342,.F.);+#3342=EDGE_LOOP('',(#3343,#3344,#3348,#3352));+#3343=ORIENTED_EDGE('',*,*,#3239,.F.);+#3344=ORIENTED_EDGE('',*,*,#3345,.T.);+#3345=EDGE_CURVE('',#3235,#3346,#750,.T.);+#3346=VERTEX_POINT('',#3347);+#3347=CARTESIAN_POINT('',(7.,5.22,0.85));+#3348=ORIENTED_EDGE('',*,*,#3349,.T.);+#3349=EDGE_CURVE('',#3346,#813,#3350,.T.);+#3350=LINE('',#3351,#759);+#3351=CARTESIAN_POINT('',(7.2,5.22,0.85));+#3352=ORIENTED_EDGE('',*,*,#812,.F.);+#3353=ADVANCED_FACE('',(#3354),#3373,.F.);+#3354=FACE_BOUND('',#3355,.F.);+#3355=EDGE_LOOP('',(#3356,#3359,#3364,#3369,#3371,#3372));+#3356=ORIENTED_EDGE('',*,*,#3357,.F.);+#3357=EDGE_CURVE('',#3358,#3346,#3350,.T.);+#3358=VERTEX_POINT('',#3351);+#3359=ORIENTED_EDGE('',*,*,#3360,.T.);+#3360=EDGE_CURVE('',#3358,#3361,#3363,.T.);+#3361=VERTEX_POINT('',#3362);+#3362=CARTESIAN_POINT('',(7.2,4.78,0.85));+#3363=LINE('',#3351,#751);+#3364=ORIENTED_EDGE('',*,*,#3365,.T.);+#3365=EDGE_CURVE('',#3361,#3366,#3368,.T.);+#3366=VERTEX_POINT('',#3367);+#3367=CARTESIAN_POINT('',(7.,4.78,0.85));+#3368=LINE('',#3362,#759);+#3369=ORIENTED_EDGE('',*,*,#3370,.T.);+#3370=EDGE_CURVE('',#3366,#817,#3368,.T.);+#3371=ORIENTED_EDGE('',*,*,#816,.F.);+#3372=ORIENTED_EDGE('',*,*,#3349,.F.);+#3373=PLANE('',#3374);+#3374=AXIS2_PLACEMENT_3D('',#3351,#312,#760);+#3375=ADVANCED_FACE('',(#3376),#283,.F.);+#3376=FACE_BOUND('',#3377,.F.);+#3377=EDGE_LOOP('',(#3378,#3379,#3383,#3387));+#3378=ORIENTED_EDGE('',*,*,#3370,.F.);+#3379=ORIENTED_EDGE('',*,*,#3380,.T.);+#3380=EDGE_CURVE('',#3366,#3381,#750,.T.);+#3381=VERTEX_POINT('',#3382);+#3382=CARTESIAN_POINT('',(7.,4.22,0.85));+#3383=ORIENTED_EDGE('',*,*,#3384,.T.);+#3384=EDGE_CURVE('',#3381,#821,#3385,.T.);+#3385=LINE('',#3386,#759);+#3386=CARTESIAN_POINT('',(7.2,4.22,0.85));+#3387=ORIENTED_EDGE('',*,*,#820,.F.);+#3388=ADVANCED_FACE('',(#3389),#3408,.F.);+#3389=FACE_BOUND('',#3390,.F.);+#3390=EDGE_LOOP('',(#3391,#3394,#3399,#3404,#3406,#3407));+#3391=ORIENTED_EDGE('',*,*,#3392,.F.);+#3392=EDGE_CURVE('',#3393,#3381,#3385,.T.);+#3393=VERTEX_POINT('',#3386);+#3394=ORIENTED_EDGE('',*,*,#3395,.T.);+#3395=EDGE_CURVE('',#3393,#3396,#3398,.T.);+#3396=VERTEX_POINT('',#3397);+#3397=CARTESIAN_POINT('',(7.2,3.78,0.85));+#3398=LINE('',#3386,#751);+#3399=ORIENTED_EDGE('',*,*,#3400,.T.);+#3400=EDGE_CURVE('',#3396,#3401,#3403,.T.);+#3401=VERTEX_POINT('',#3402);+#3402=CARTESIAN_POINT('',(7.,3.78,0.85));+#3403=LINE('',#3397,#759);+#3404=ORIENTED_EDGE('',*,*,#3405,.T.);+#3405=EDGE_CURVE('',#3401,#825,#3403,.T.);+#3406=ORIENTED_EDGE('',*,*,#824,.F.);+#3407=ORIENTED_EDGE('',*,*,#3384,.F.);+#3408=PLANE('',#3409);+#3409=AXIS2_PLACEMENT_3D('',#3386,#312,#760);+#3410=ADVANCED_FACE('',(#3411),#283,.F.);+#3411=FACE_BOUND('',#3412,.F.);+#3412=EDGE_LOOP('',(#3413,#3414,#3418,#3422));+#3413=ORIENTED_EDGE('',*,*,#3405,.F.);+#3414=ORIENTED_EDGE('',*,*,#3415,.T.);+#3415=EDGE_CURVE('',#3401,#3416,#750,.T.);+#3416=VERTEX_POINT('',#3417);+#3417=CARTESIAN_POINT('',(7.,3.22,0.85));+#3418=ORIENTED_EDGE('',*,*,#3419,.T.);+#3419=EDGE_CURVE('',#3416,#829,#3420,.T.);+#3420=LINE('',#3421,#759);+#3421=CARTESIAN_POINT('',(7.2,3.22,0.85));+#3422=ORIENTED_EDGE('',*,*,#828,.F.);+#3423=ADVANCED_FACE('',(#3424),#3443,.F.);+#3424=FACE_BOUND('',#3425,.F.);+#3425=EDGE_LOOP('',(#3426,#3429,#3434,#3439,#3441,#3442));+#3426=ORIENTED_EDGE('',*,*,#3427,.F.);+#3427=EDGE_CURVE('',#3428,#3416,#3420,.T.);+#3428=VERTEX_POINT('',#3421);+#3429=ORIENTED_EDGE('',*,*,#3430,.T.);+#3430=EDGE_CURVE('',#3428,#3431,#3433,.T.);+#3431=VERTEX_POINT('',#3432);+#3432=CARTESIAN_POINT('',(7.2,2.78,0.85));+#3433=LINE('',#3421,#751);+#3434=ORIENTED_EDGE('',*,*,#3435,.T.);+#3435=EDGE_CURVE('',#3431,#3436,#3438,.T.);+#3436=VERTEX_POINT('',#3437);+#3437=CARTESIAN_POINT('',(7.,2.78,0.85));+#3438=LINE('',#3432,#759);+#3439=ORIENTED_EDGE('',*,*,#3440,.T.);+#3440=EDGE_CURVE('',#3436,#833,#3438,.T.);+#3441=ORIENTED_EDGE('',*,*,#832,.F.);+#3442=ORIENTED_EDGE('',*,*,#3419,.F.);+#3443=PLANE('',#3444);+#3444=AXIS2_PLACEMENT_3D('',#3421,#312,#760);+#3445=ADVANCED_FACE('',(#3446),#283,.F.);+#3446=FACE_BOUND('',#3447,.F.);+#3447=EDGE_LOOP('',(#3448,#3449,#3453,#3457));+#3448=ORIENTED_EDGE('',*,*,#3440,.F.);+#3449=ORIENTED_EDGE('',*,*,#3450,.T.);+#3450=EDGE_CURVE('',#3436,#3451,#750,.T.);+#3451=VERTEX_POINT('',#3452);+#3452=CARTESIAN_POINT('',(7.,2.22,0.85));+#3453=ORIENTED_EDGE('',*,*,#3454,.T.);+#3454=EDGE_CURVE('',#3451,#837,#3455,.T.);+#3455=LINE('',#3456,#759);+#3456=CARTESIAN_POINT('',(7.2,2.22,0.85));+#3457=ORIENTED_EDGE('',*,*,#836,.F.);+#3458=ADVANCED_FACE('',(#3459),#3478,.F.);+#3459=FACE_BOUND('',#3460,.F.);+#3460=EDGE_LOOP('',(#3461,#3464,#3469,#3474,#3476,#3477));+#3461=ORIENTED_EDGE('',*,*,#3462,.F.);+#3462=EDGE_CURVE('',#3463,#3451,#3455,.T.);+#3463=VERTEX_POINT('',#3456);+#3464=ORIENTED_EDGE('',*,*,#3465,.T.);+#3465=EDGE_CURVE('',#3463,#3466,#3468,.T.);+#3466=VERTEX_POINT('',#3467);+#3467=CARTESIAN_POINT('',(7.2,1.78,0.85));+#3468=LINE('',#3456,#751);+#3469=ORIENTED_EDGE('',*,*,#3470,.T.);+#3470=EDGE_CURVE('',#3466,#3471,#3473,.T.);+#3471=VERTEX_POINT('',#3472);+#3472=CARTESIAN_POINT('',(7.,1.78,0.85));+#3473=LINE('',#3467,#759);+#3474=ORIENTED_EDGE('',*,*,#3475,.T.);+#3475=EDGE_CURVE('',#3471,#841,#3473,.T.);+#3476=ORIENTED_EDGE('',*,*,#840,.F.);+#3477=ORIENTED_EDGE('',*,*,#3454,.F.);+#3478=PLANE('',#3479);+#3479=AXIS2_PLACEMENT_3D('',#3456,#312,#760);+#3480=ADVANCED_FACE('',(#3481),#283,.F.);+#3481=FACE_BOUND('',#3482,.F.);+#3482=EDGE_LOOP('',(#3483,#3484,#3488,#3492));+#3483=ORIENTED_EDGE('',*,*,#3475,.F.);+#3484=ORIENTED_EDGE('',*,*,#3485,.T.);+#3485=EDGE_CURVE('',#3471,#3486,#750,.T.);+#3486=VERTEX_POINT('',#3487);+#3487=CARTESIAN_POINT('',(7.,1.22,0.85));+#3488=ORIENTED_EDGE('',*,*,#3489,.T.);+#3489=EDGE_CURVE('',#3486,#845,#3490,.T.);+#3490=LINE('',#3491,#759);+#3491=CARTESIAN_POINT('',(7.2,1.22,0.85));+#3492=ORIENTED_EDGE('',*,*,#844,.F.);+#3493=ADVANCED_FACE('',(#3494),#3513,.F.);+#3494=FACE_BOUND('',#3495,.F.);+#3495=EDGE_LOOP('',(#3496,#3499,#3504,#3509,#3511,#3512));+#3496=ORIENTED_EDGE('',*,*,#3497,.F.);+#3497=EDGE_CURVE('',#3498,#3486,#3490,.T.);+#3498=VERTEX_POINT('',#3491);+#3499=ORIENTED_EDGE('',*,*,#3500,.T.);+#3500=EDGE_CURVE('',#3498,#3501,#3503,.T.);+#3501=VERTEX_POINT('',#3502);+#3502=CARTESIAN_POINT('',(7.2,0.78,0.85));+#3503=LINE('',#3491,#751);+#3504=ORIENTED_EDGE('',*,*,#3505,.T.);+#3505=EDGE_CURVE('',#3501,#3506,#3508,.T.);+#3506=VERTEX_POINT('',#3507);+#3507=CARTESIAN_POINT('',(7.,0.78,0.85));+#3508=LINE('',#3502,#759);+#3509=ORIENTED_EDGE('',*,*,#3510,.T.);+#3510=EDGE_CURVE('',#3506,#849,#3508,.T.);+#3511=ORIENTED_EDGE('',*,*,#848,.F.);+#3512=ORIENTED_EDGE('',*,*,#3489,.F.);+#3513=PLANE('',#3514);+#3514=AXIS2_PLACEMENT_3D('',#3491,#312,#760);+#3515=ADVANCED_FACE('',(#3516),#283,.F.);+#3516=FACE_BOUND('',#3517,.F.);+#3517=EDGE_LOOP('',(#3518,#3519,#3523,#3527));+#3518=ORIENTED_EDGE('',*,*,#3510,.F.);+#3519=ORIENTED_EDGE('',*,*,#3520,.T.);+#3520=EDGE_CURVE('',#3506,#3521,#750,.T.);+#3521=VERTEX_POINT('',#3522);+#3522=CARTESIAN_POINT('',(7.,0.22,0.85));+#3523=ORIENTED_EDGE('',*,*,#3524,.T.);+#3524=EDGE_CURVE('',#3521,#853,#3525,.T.);+#3525=LINE('',#3526,#759);+#3526=CARTESIAN_POINT('',(7.2,0.22,0.85));+#3527=ORIENTED_EDGE('',*,*,#852,.F.);+#3528=ADVANCED_FACE('',(#3529),#3548,.F.);+#3529=FACE_BOUND('',#3530,.F.);+#3530=EDGE_LOOP('',(#3531,#3534,#3539,#3544,#3546,#3547));+#3531=ORIENTED_EDGE('',*,*,#3532,.F.);+#3532=EDGE_CURVE('',#3533,#3521,#3525,.T.);+#3533=VERTEX_POINT('',#3526);+#3534=ORIENTED_EDGE('',*,*,#3535,.T.);+#3535=EDGE_CURVE('',#3533,#3536,#3538,.T.);+#3536=VERTEX_POINT('',#3537);+#3537=CARTESIAN_POINT('',(7.2,-0.22,0.85));+#3538=LINE('',#3526,#751);+#3539=ORIENTED_EDGE('',*,*,#3540,.T.);+#3540=EDGE_CURVE('',#3536,#3541,#3543,.T.);+#3541=VERTEX_POINT('',#3542);+#3542=CARTESIAN_POINT('',(7.,-0.22,0.85));+#3543=LINE('',#3537,#759);+#3544=ORIENTED_EDGE('',*,*,#3545,.T.);+#3545=EDGE_CURVE('',#3541,#857,#3543,.T.);+#3546=ORIENTED_EDGE('',*,*,#856,.F.);+#3547=ORIENTED_EDGE('',*,*,#3524,.F.);+#3548=PLANE('',#3549);+#3549=AXIS2_PLACEMENT_3D('',#3526,#312,#760);+#3550=ADVANCED_FACE('',(#3551),#283,.F.);+#3551=FACE_BOUND('',#3552,.F.);+#3552=EDGE_LOOP('',(#3553,#3554,#3558,#3562));+#3553=ORIENTED_EDGE('',*,*,#3545,.F.);+#3554=ORIENTED_EDGE('',*,*,#3555,.T.);+#3555=EDGE_CURVE('',#3541,#3556,#750,.T.);+#3556=VERTEX_POINT('',#3557);+#3557=CARTESIAN_POINT('',(7.,-0.78,0.85));+#3558=ORIENTED_EDGE('',*,*,#3559,.T.);+#3559=EDGE_CURVE('',#3556,#861,#3560,.T.);+#3560=LINE('',#3561,#759);+#3561=CARTESIAN_POINT('',(7.2,-0.78,0.85));+#3562=ORIENTED_EDGE('',*,*,#860,.F.);+#3563=ADVANCED_FACE('',(#3564),#3583,.F.);+#3564=FACE_BOUND('',#3565,.F.);+#3565=EDGE_LOOP('',(#3566,#3569,#3574,#3579,#3581,#3582));+#3566=ORIENTED_EDGE('',*,*,#3567,.F.);+#3567=EDGE_CURVE('',#3568,#3556,#3560,.T.);+#3568=VERTEX_POINT('',#3561);+#3569=ORIENTED_EDGE('',*,*,#3570,.T.);+#3570=EDGE_CURVE('',#3568,#3571,#3573,.T.);+#3571=VERTEX_POINT('',#3572);+#3572=CARTESIAN_POINT('',(7.2,-1.22,0.85));+#3573=LINE('',#3561,#751);+#3574=ORIENTED_EDGE('',*,*,#3575,.T.);+#3575=EDGE_CURVE('',#3571,#3576,#3578,.T.);+#3576=VERTEX_POINT('',#3577);+#3577=CARTESIAN_POINT('',(7.,-1.22,0.85));+#3578=LINE('',#3572,#759);+#3579=ORIENTED_EDGE('',*,*,#3580,.T.);+#3580=EDGE_CURVE('',#3576,#865,#3578,.T.);+#3581=ORIENTED_EDGE('',*,*,#864,.F.);+#3582=ORIENTED_EDGE('',*,*,#3559,.F.);+#3583=PLANE('',#3584);+#3584=AXIS2_PLACEMENT_3D('',#3561,#312,#760);+#3585=ADVANCED_FACE('',(#3586),#283,.F.);+#3586=FACE_BOUND('',#3587,.F.);+#3587=EDGE_LOOP('',(#3588,#3589,#3593,#3597));+#3588=ORIENTED_EDGE('',*,*,#3580,.F.);+#3589=ORIENTED_EDGE('',*,*,#3590,.T.);+#3590=EDGE_CURVE('',#3576,#3591,#750,.T.);+#3591=VERTEX_POINT('',#3592);+#3592=CARTESIAN_POINT('',(7.,-1.78,0.85));+#3593=ORIENTED_EDGE('',*,*,#3594,.T.);+#3594=EDGE_CURVE('',#3591,#869,#3595,.T.);+#3595=LINE('',#3596,#759);+#3596=CARTESIAN_POINT('',(7.2,-1.78,0.85));+#3597=ORIENTED_EDGE('',*,*,#868,.F.);+#3598=ADVANCED_FACE('',(#3599),#3618,.F.);+#3599=FACE_BOUND('',#3600,.F.);+#3600=EDGE_LOOP('',(#3601,#3604,#3609,#3614,#3616,#3617));+#3601=ORIENTED_EDGE('',*,*,#3602,.F.);+#3602=EDGE_CURVE('',#3603,#3591,#3595,.T.);+#3603=VERTEX_POINT('',#3596);+#3604=ORIENTED_EDGE('',*,*,#3605,.T.);+#3605=EDGE_CURVE('',#3603,#3606,#3608,.T.);+#3606=VERTEX_POINT('',#3607);+#3607=CARTESIAN_POINT('',(7.2,-2.22,0.85));+#3608=LINE('',#3596,#751);+#3609=ORIENTED_EDGE('',*,*,#3610,.T.);+#3610=EDGE_CURVE('',#3606,#3611,#3613,.T.);+#3611=VERTEX_POINT('',#3612);+#3612=CARTESIAN_POINT('',(7.,-2.22,0.85));+#3613=LINE('',#3607,#759);+#3614=ORIENTED_EDGE('',*,*,#3615,.T.);+#3615=EDGE_CURVE('',#3611,#873,#3613,.T.);+#3616=ORIENTED_EDGE('',*,*,#872,.F.);+#3617=ORIENTED_EDGE('',*,*,#3594,.F.);+#3618=PLANE('',#3619);+#3619=AXIS2_PLACEMENT_3D('',#3596,#312,#760);+#3620=ADVANCED_FACE('',(#3621),#283,.F.);+#3621=FACE_BOUND('',#3622,.F.);+#3622=EDGE_LOOP('',(#3623,#3624,#3628,#3632));+#3623=ORIENTED_EDGE('',*,*,#3615,.F.);+#3624=ORIENTED_EDGE('',*,*,#3625,.T.);+#3625=EDGE_CURVE('',#3611,#3626,#750,.T.);+#3626=VERTEX_POINT('',#3627);+#3627=CARTESIAN_POINT('',(7.,-2.78,0.85));+#3628=ORIENTED_EDGE('',*,*,#3629,.T.);+#3629=EDGE_CURVE('',#3626,#877,#3630,.T.);+#3630=LINE('',#3631,#759);+#3631=CARTESIAN_POINT('',(7.2,-2.78,0.85));+#3632=ORIENTED_EDGE('',*,*,#876,.F.);+#3633=ADVANCED_FACE('',(#3634),#3653,.F.);+#3634=FACE_BOUND('',#3635,.F.);+#3635=EDGE_LOOP('',(#3636,#3639,#3644,#3649,#3651,#3652));+#3636=ORIENTED_EDGE('',*,*,#3637,.F.);+#3637=EDGE_CURVE('',#3638,#3626,#3630,.T.);+#3638=VERTEX_POINT('',#3631);+#3639=ORIENTED_EDGE('',*,*,#3640,.T.);+#3640=EDGE_CURVE('',#3638,#3641,#3643,.T.);+#3641=VERTEX_POINT('',#3642);+#3642=CARTESIAN_POINT('',(7.2,-3.22,0.85));+#3643=LINE('',#3631,#751);+#3644=ORIENTED_EDGE('',*,*,#3645,.T.);+#3645=EDGE_CURVE('',#3641,#3646,#3648,.T.);+#3646=VERTEX_POINT('',#3647);+#3647=CARTESIAN_POINT('',(7.,-3.22,0.85));+#3648=LINE('',#3642,#759);+#3649=ORIENTED_EDGE('',*,*,#3650,.T.);+#3650=EDGE_CURVE('',#3646,#881,#3648,.T.);+#3651=ORIENTED_EDGE('',*,*,#880,.F.);+#3652=ORIENTED_EDGE('',*,*,#3629,.F.);+#3653=PLANE('',#3654);+#3654=AXIS2_PLACEMENT_3D('',#3631,#312,#760);+#3655=ADVANCED_FACE('',(#3656),#283,.F.);+#3656=FACE_BOUND('',#3657,.F.);+#3657=EDGE_LOOP('',(#3658,#3659,#3663,#3667));+#3658=ORIENTED_EDGE('',*,*,#3650,.F.);+#3659=ORIENTED_EDGE('',*,*,#3660,.T.);+#3660=EDGE_CURVE('',#3646,#3661,#750,.T.);+#3661=VERTEX_POINT('',#3662);+#3662=CARTESIAN_POINT('',(7.,-3.78,0.85));+#3663=ORIENTED_EDGE('',*,*,#3664,.T.);+#3664=EDGE_CURVE('',#3661,#885,#3665,.T.);+#3665=LINE('',#3666,#759);+#3666=CARTESIAN_POINT('',(7.2,-3.78,0.85));+#3667=ORIENTED_EDGE('',*,*,#884,.F.);+#3668=ADVANCED_FACE('',(#3669),#3688,.F.);+#3669=FACE_BOUND('',#3670,.F.);+#3670=EDGE_LOOP('',(#3671,#3674,#3679,#3684,#3686,#3687));+#3671=ORIENTED_EDGE('',*,*,#3672,.F.);+#3672=EDGE_CURVE('',#3673,#3661,#3665,.T.);+#3673=VERTEX_POINT('',#3666);+#3674=ORIENTED_EDGE('',*,*,#3675,.T.);+#3675=EDGE_CURVE('',#3673,#3676,#3678,.T.);+#3676=VERTEX_POINT('',#3677);+#3677=CARTESIAN_POINT('',(7.2,-4.22,0.85));+#3678=LINE('',#3666,#751);+#3679=ORIENTED_EDGE('',*,*,#3680,.T.);+#3680=EDGE_CURVE('',#3676,#3681,#3683,.T.);+#3681=VERTEX_POINT('',#3682);+#3682=CARTESIAN_POINT('',(7.,-4.22,0.85));+#3683=LINE('',#3677,#759);+#3684=ORIENTED_EDGE('',*,*,#3685,.T.);+#3685=EDGE_CURVE('',#3681,#889,#3683,.T.);+#3686=ORIENTED_EDGE('',*,*,#888,.F.);+#3687=ORIENTED_EDGE('',*,*,#3664,.F.);+#3688=PLANE('',#3689);+#3689=AXIS2_PLACEMENT_3D('',#3666,#312,#760);+#3690=ADVANCED_FACE('',(#3691),#283,.F.);+#3691=FACE_BOUND('',#3692,.F.);+#3692=EDGE_LOOP('',(#3693,#3694,#3698,#3702));+#3693=ORIENTED_EDGE('',*,*,#3685,.F.);+#3694=ORIENTED_EDGE('',*,*,#3695,.T.);+#3695=EDGE_CURVE('',#3681,#3696,#750,.T.);+#3696=VERTEX_POINT('',#3697);+#3697=CARTESIAN_POINT('',(7.,-4.78,0.85));+#3698=ORIENTED_EDGE('',*,*,#3699,.T.);+#3699=EDGE_CURVE('',#3696,#893,#3700,.T.);+#3700=LINE('',#3701,#759);+#3701=CARTESIAN_POINT('',(7.2,-4.78,0.85));+#3702=ORIENTED_EDGE('',*,*,#892,.F.);+#3703=ADVANCED_FACE('',(#3704),#3723,.F.);+#3704=FACE_BOUND('',#3705,.F.);+#3705=EDGE_LOOP('',(#3706,#3709,#3714,#3719,#3721,#3722));+#3706=ORIENTED_EDGE('',*,*,#3707,.F.);+#3707=EDGE_CURVE('',#3708,#3696,#3700,.T.);+#3708=VERTEX_POINT('',#3701);+#3709=ORIENTED_EDGE('',*,*,#3710,.T.);+#3710=EDGE_CURVE('',#3708,#3711,#3713,.T.);+#3711=VERTEX_POINT('',#3712);+#3712=CARTESIAN_POINT('',(7.2,-5.22,0.85));+#3713=LINE('',#3701,#751);+#3714=ORIENTED_EDGE('',*,*,#3715,.T.);+#3715=EDGE_CURVE('',#3711,#3716,#3718,.T.);+#3716=VERTEX_POINT('',#3717);+#3717=CARTESIAN_POINT('',(7.,-5.22,0.85));+#3718=LINE('',#3712,#759);+#3719=ORIENTED_EDGE('',*,*,#3720,.T.);+#3720=EDGE_CURVE('',#3716,#897,#3718,.T.);+#3721=ORIENTED_EDGE('',*,*,#896,.F.);+#3722=ORIENTED_EDGE('',*,*,#3699,.F.);+#3723=PLANE('',#3724);+#3724=AXIS2_PLACEMENT_3D('',#3701,#312,#760);+#3725=ADVANCED_FACE('',(#3726),#283,.F.);+#3726=FACE_BOUND('',#3727,.F.);+#3727=EDGE_LOOP('',(#3728,#3729,#3733,#3737));+#3728=ORIENTED_EDGE('',*,*,#3720,.F.);+#3729=ORIENTED_EDGE('',*,*,#3730,.T.);+#3730=EDGE_CURVE('',#3716,#3731,#750,.T.);+#3731=VERTEX_POINT('',#3732);+#3732=CARTESIAN_POINT('',(7.,-5.78,0.85));+#3733=ORIENTED_EDGE('',*,*,#3734,.T.);+#3734=EDGE_CURVE('',#3731,#901,#3735,.T.);+#3735=LINE('',#3736,#759);+#3736=CARTESIAN_POINT('',(7.2,-5.78,0.85));+#3737=ORIENTED_EDGE('',*,*,#900,.F.);+#3738=ADVANCED_FACE('',(#3739),#3758,.F.);+#3739=FACE_BOUND('',#3740,.F.);+#3740=EDGE_LOOP('',(#3741,#3744,#3749,#3754,#3756,#3757));+#3741=ORIENTED_EDGE('',*,*,#3742,.F.);+#3742=EDGE_CURVE('',#3743,#3731,#3735,.T.);+#3743=VERTEX_POINT('',#3736);+#3744=ORIENTED_EDGE('',*,*,#3745,.T.);+#3745=EDGE_CURVE('',#3743,#3746,#3748,.T.);+#3746=VERTEX_POINT('',#3747);+#3747=CARTESIAN_POINT('',(7.2,-6.22,0.85));+#3748=LINE('',#3736,#751);+#3749=ORIENTED_EDGE('',*,*,#3750,.T.);+#3750=EDGE_CURVE('',#3746,#3751,#3753,.T.);+#3751=VERTEX_POINT('',#3752);+#3752=CARTESIAN_POINT('',(7.,-6.22,0.85));+#3753=LINE('',#3747,#759);+#3754=ORIENTED_EDGE('',*,*,#3755,.T.);+#3755=EDGE_CURVE('',#3751,#905,#3753,.T.);+#3756=ORIENTED_EDGE('',*,*,#904,.F.);+#3757=ORIENTED_EDGE('',*,*,#3734,.F.);+#3758=PLANE('',#3759);+#3759=AXIS2_PLACEMENT_3D('',#3736,#312,#760);+#3760=ADVANCED_FACE('',(#3761),#283,.F.);+#3761=FACE_BOUND('',#3762,.F.);+#3762=EDGE_LOOP('',(#3763,#3764,#3768,#3773,#3778,#3786,#3789,#3790));+#3763=ORIENTED_EDGE('',*,*,#3755,.F.);+#3764=ORIENTED_EDGE('',*,*,#3765,.T.);+#3765=EDGE_CURVE('',#3751,#3766,#750,.T.);+#3766=VERTEX_POINT('',#3767);+#3767=CARTESIAN_POINT('',(7.,-6.825,0.85));+#3768=ORIENTED_EDGE('',*,*,#3769,.T.);+#3769=EDGE_CURVE('',#3766,#3770,#3772,.T.);+#3770=VERTEX_POINT('',#3771);+#3771=CARTESIAN_POINT('',(6.825,-7.,0.85));+#3772=LINE('',#3767,#3310);+#3773=ORIENTED_EDGE('',*,*,#3774,.T.);+#3774=EDGE_CURVE('',#3770,#3775,#3777,.T.);+#3775=VERTEX_POINT('',#3776);+#3776=CARTESIAN_POINT('',(6.22,-7.,0.85));+#3777=LINE('',#3771,#759);+#3778=ORIENTED_EDGE('',*,*,#3779,.T.);+#3779=EDGE_CURVE('',#3775,#3780,#3782,.T.);+#3780=VERTEX_POINT('',#3781);+#3781=CARTESIAN_POINT('',(6.22,-6.925,0.85));+#3782=LINE('',#3783,#3784);+#3783=CARTESIAN_POINT('',(6.22,-7.2,0.85));+#3784=VECTOR('',#3785,1.);+#3785=DIRECTION('',(1.110223024625E-16,1.,0.));+#3786=ORIENTED_EDGE('',*,*,#3787,.F.);+#3787=EDGE_CURVE('',#3292,#3780,#3788,.T.);+#3788=LINE('',#3293,#759);+#3789=ORIENTED_EDGE('',*,*,#3308,.F.);+#3790=ORIENTED_EDGE('',*,*,#908,.F.);+#3791=ADVANCED_FACE('',(#3792),#3808,.T.);+#3792=FACE_BOUND('',#3793,.T.);+#3793=EDGE_LOOP('',(#3794,#3806,#3807,#1114));+#3794=ORIENTED_EDGE('',*,*,#3795,.T.);+#3795=EDGE_CURVE('',#1116,#986,#3796,.T.);+#3796=B_SPLINE_CURVE_WITH_KNOTS('',8,(#3797,#3798,#3799,#3800,#3801,#3802,#3803,#3804,#3805),.UNSPECIFIED.,.F.,.F.,(9,9),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3797=CARTESIAN_POINT('',(-6.795124813083,-6.722568209866,1.460996513181));+#3798=CARTESIAN_POINT('',(-6.79340419061,-6.721855504702,1.468628450826));+#3799=CARTESIAN_POINT('',(-6.790211350105,-6.720532986862,1.476427534575));+#3800=CARTESIAN_POINT('',(-6.785339012167,-6.718514798409,1.483943009305));+#3801=CARTESIAN_POINT('',(-6.778744741123,-6.715783361904,1.490584376374));+#3802=CARTESIAN_POINT('',(-6.770804485249,-6.712494400239,1.495536600977));+#3803=CARTESIAN_POINT('',(-6.762422617513,-6.709022516939,1.498611518734));+#3804=CARTESIAN_POINT('',(-6.754138333162,-6.70559105401,1.500000286476));+#3805=CARTESIAN_POINT('',(-6.746349033255,-6.702364620345,1.5));+#3806=ORIENTED_EDGE('',*,*,#985,.T.);+#3807=ORIENTED_EDGE('',*,*,#946,.F.);+#3808=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#1119,#1120,#1121,#1122,#1123),(#3809,#3810,#3811,#3812,#3813),(#989,#990,#991,#992,#993)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,13.517816638234),(-0.698356801641,-4.048920165974E-02,13.477327436574,14.135195036556),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#3809=CARTESIAN_POINT('',(-6.786838234914,-7.416775919098,1.5));+#3810=CARTESIAN_POINT('',(-6.786838234914,-7.087842119108,1.5));+#3811=CARTESIAN_POINT('',(-6.786838234914,-1.89636248505E-15,1.5));+#3812=CARTESIAN_POINT('',(-6.786838234914,7.087842119108,1.5));+#3813=CARTESIAN_POINT('',(-6.786838234914,7.416775919098,1.5));+#3814=ADVANCED_FACE('',(#3815),#3846,.T.);+#3815=FACE_BOUND('',#3816,.T.);+#3816=EDGE_LOOP('',(#3817,#3836,#3837,#3838));+#3817=ORIENTED_EDGE('',*,*,#3818,.T.);+#3818=EDGE_CURVE('',#3819,#996,#3821,.T.);+#3819=VERTEX_POINT('',#3820);+#3820=CARTESIAN_POINT('',(-6.722628206646,-6.795256413291,1.460395584541));+#3821=B_SPLINE_CURVE_WITH_KNOTS('',7,(#3822,#3823,#3824,#3825,#3826,#3827,#3828,#3829,#3830,#3831,#3832,#3833,#3834,#3835),.UNSPECIFIED.,.F.,.F.,(8,6,8),(0.,0.290658527775,1.),.UNSPECIFIED.);+#3822=CARTESIAN_POINT('',(-6.722568209866,-6.795124813083,1.460996513181));+#3823=CARTESIAN_POINT('',(-6.722331462565,-6.794553254539,1.463531699856));+#3824=CARTESIAN_POINT('',(-6.722026069695,-6.793815970929,1.466085556996));+#3825=CARTESIAN_POINT('',(-6.721648522979,-6.792904492528,1.468640881423));+#3826=CARTESIAN_POINT('',(-6.72119652683,-6.791813277295,1.471177446977));+#3827=CARTESIAN_POINT('',(-6.720669293247,-6.790540422829,1.473673186734));+#3828=CARTESIAN_POINT('',(-6.720067836719,-6.78908837832,1.476105375209));+#3829=CARTESIAN_POINT('',(-6.717753892579,-6.783502022995,1.484178199972));+#3830=CARTESIAN_POINT('',(-6.715688862947,-6.778516600455,1.489393677676));+#3831=CARTESIAN_POINT('',(-6.713244394352,-6.772615131207,1.493780948123));+#3832=CARTESIAN_POINT('',(-6.710531372188,-6.76606531633,1.497036425013));+#3833=CARTESIAN_POINT('',(-6.707732767695,-6.759308887375,1.499068449151));+#3834=CARTESIAN_POINT('',(-6.704980347025,-6.752663956089,1.500000203963));+#3835=CARTESIAN_POINT('',(-6.702364620347,-6.746349033255,1.5));+#3836=ORIENTED_EDGE('',*,*,#995,.T.);+#3837=ORIENTED_EDGE('',*,*,#3795,.F.);+#3838=ORIENTED_EDGE('',*,*,#3839,.F.);+#3839=EDGE_CURVE('',#3819,#1116,#3840,.T.);+#3840=B_SPLINE_CURVE_WITH_KNOTS('',2,(#3841,#3842,#3843,#3844,#3845),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.);+#3841=CARTESIAN_POINT('',(-6.519827987965,-6.997865034984,1.460996513181));+#3842=CARTESIAN_POINT('',(-6.608096545662,-6.909596477286,1.460996513181));+#3843=CARTESIAN_POINT('',(-6.758846511474,-6.758846511474,1.460996513181));+#3844=CARTESIAN_POINT('',(-6.909596477286,-6.608096545662,1.460996513181));+#3845=CARTESIAN_POINT('',(-6.997865034984,-6.519827987965,1.460996513181));+#3846=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#3841,#3842,#3843,#3844,#3845),(#3847,#3848,#3849,#3850,#3851),(#999,#1000,#1001,#1002,#1003)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.176724109503),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#3847=CARTESIAN_POINT('',(-6.513610152676,-6.991647199696,1.5));+#3848=CARTESIAN_POINT('',(-6.601878710374,-6.903378641998,1.5));+#3849=CARTESIAN_POINT('',(-6.752628676186,-6.752628676186,1.5));+#3850=CARTESIAN_POINT('',(-6.903378641998,-6.601878710374,1.5));+#3851=CARTESIAN_POINT('',(-6.991647199696,-6.513610152676,1.5));+#3852=ADVANCED_FACE('',(#3853),#3869,.T.);+#3853=FACE_BOUND('',#3854,.T.);+#3854=EDGE_LOOP('',(#3855,#3856,#3857,#3298));+#3855=ORIENTED_EDGE('',*,*,#3318,.T.);+#3856=ORIENTED_EDGE('',*,*,#1015,.T.);+#3857=ORIENTED_EDGE('',*,*,#3858,.F.);+#3858=EDGE_CURVE('',#3294,#1006,#3859,.T.);+#3859=B_SPLINE_CURVE_WITH_KNOTS('',8,(#3860,#3861,#3862,#3863,#3864,#3865,#3866,#3867,#3868),.UNSPECIFIED.,.F.,.F.,(9,9),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3860=CARTESIAN_POINT('',(6.722568209866,-6.795124813083,1.460996513181));+#3861=CARTESIAN_POINT('',(6.721855504702,-6.79340419061,1.468628450826));+#3862=CARTESIAN_POINT('',(6.720532986862,-6.790211350105,1.476427534576));+#3863=CARTESIAN_POINT('',(6.718514798409,-6.785339012167,1.483943009305));+#3864=CARTESIAN_POINT('',(6.715783361904,-6.778744741123,1.490584376375));+#3865=CARTESIAN_POINT('',(6.712494400239,-6.770804485248,1.495536600977));+#3866=CARTESIAN_POINT('',(6.709022516939,-6.762422617513,1.498611518734));+#3867=CARTESIAN_POINT('',(6.70559105401,-6.754138333162,1.500000286476));+#3868=CARTESIAN_POINT('',(6.702364620345,-6.746349033255,1.5));+#3869=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#3301,#3302,#3303,#3304,#3305),(#3870,#3871,#3872,#3873,#3874),(#1019,#1020,#1021,#1022,#1023)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,0.176724109503),(-0.28964361549,-3.998243263536E-02,0.136741676868,0.386402859722),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.781002645201,0.781002645201,0.781002645201,0.781002645201,0.781002645201),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#3870=CARTESIAN_POINT('',(6.991647199696,-6.513610152676,1.5));+#3871=CARTESIAN_POINT('',(6.903378641998,-6.601878710374,1.5));+#3872=CARTESIAN_POINT('',(6.752628676186,-6.752628676186,1.5));+#3873=CARTESIAN_POINT('',(6.601878710374,-6.903378641998,1.5));+#3874=CARTESIAN_POINT('',(6.513610152676,-6.991647199696,1.5));+#3875=ADVANCED_FACE('',(#3876),#3889,.T.);+#3876=FACE_BOUND('',#3877,.T.);+#3877=EDGE_LOOP('',(#3878,#3879,#3880,#3881));+#3878=ORIENTED_EDGE('',*,*,#3858,.T.);+#3879=ORIENTED_EDGE('',*,*,#1005,.T.);+#3880=ORIENTED_EDGE('',*,*,#3818,.F.);+#3881=ORIENTED_EDGE('',*,*,#3882,.F.);+#3882=EDGE_CURVE('',#3294,#3819,#3883,.T.);+#3883=B_SPLINE_CURVE_WITH_KNOTS('',2,(#3884,#3885,#3886,#3887,#3888),.UNSPECIFIED.,.F.,.F.,(3,1,1,3),(-0.698356801641,-4.048920165973E-02,13.477327436574,14.135195036556),.UNSPECIFIED.);+#3884=CARTESIAN_POINT('',(7.416775919098,-6.795256413291,1.460395584541));+#3885=CARTESIAN_POINT('',(7.087842119108,-6.795256413291,1.460395584541));+#3886=CARTESIAN_POINT('',(-2.798288665974E-15,-6.795256413291,1.460395584541));+#3887=CARTESIAN_POINT('',(-7.087842119108,-6.795256413291,1.460395584541));+#3888=CARTESIAN_POINT('',(-7.416775919098,-6.795256413291,1.460395584541));+#3889=( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,2,((#3884,#3885,#3886,#3887,#3888),(#3890,#3891,#3892,#3893,#3894),(#1009,#1010,#1011,#1012,#1013)),.UNSPECIFIED.,.F.,.F.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,1,1,3),(0.,13.517816638234),(-0.698356801641,-4.048920165973E-02,13.477327436574,14.135195036556),.UNSPECIFIED.) GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(((1.,1.,1.,1.,1.),(0.777145961457,0.777145961457,0.777145961457,0.777145961457,0.777145961457),(1.,1.,1.,1.,1.))) REPRESENTATION_ITEM('') SURFACE() );+#3890=CARTESIAN_POINT('',(7.416775919098,-6.786838234914,1.5));+#3891=CARTESIAN_POINT('',(7.087842119108,-6.786838234914,1.5));+#3892=CARTESIAN_POINT('',(-3.893816704882E-16,-6.786838234914,1.5));+#3893=CARTESIAN_POINT('',(-7.087842119108,-6.786838234914,1.5));+#3894=CARTESIAN_POINT('',(-7.416775919098,-6.786838234914,1.5));+#3895=ADVANCED_FACE('',(#3896),#3899,.F.);+#3896=FACE_BOUND('',#3897,.T.);+#3897=EDGE_LOOP('',(#3898));+#3898=ORIENTED_EDGE('',*,*,#1036,.F.);+#3899=PLANE('',#3900);+#3900=AXIS2_PLACEMENT_3D('',#1041,#312,#752);+#3901=ADVANCED_FACE('',(#3902),#3918,.F.);+#3902=FACE_BOUND('',#3903,.F.);+#3903=EDGE_LOOP('',(#3904,#3911,#3914,#3915));+#3904=ORIENTED_EDGE('',*,*,#3905,.T.);+#3905=EDGE_CURVE('',#3906,#3908,#3910,.T.);+#3906=VERTEX_POINT('',#3907);+#3907=CARTESIAN_POINT('',(-6.861838234914,6.755919117457,0.1));+#3908=VERTEX_POINT('',#3909);+#3909=CARTESIAN_POINT('',(-6.755919117457,6.861838234914,0.1));+#3910=LINE('',#3907,#244);+#3911=ORIENTED_EDGE('',*,*,#3912,.T.);+#3912=EDGE_CURVE('',#3908,#1053,#3913,.T.);+#3913=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3909,#1054),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3914=ORIENTED_EDGE('',*,*,#1050,.F.);+#3915=ORIENTED_EDGE('',*,*,#3916,.F.);+#3916=EDGE_CURVE('',#3906,#1051,#3917,.T.);+#3917=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3907,#1052),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3918=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#3907,#1052),(#3909,#1054)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3919=ADVANCED_FACE('',(#3920),#3989,.T.);+#3920=FACE_BOUND('',#3921,.T.);+#3921=EDGE_LOOP('',(#1068,#3922,#3930,#3939,#3946,#3955,#3960,#3965,#3970,#3977,#3984,#1099));+#3922=ORIENTED_EDGE('',*,*,#3923,.T.);+#3923=EDGE_CURVE('',#1070,#3924,#3926,.T.);+#3924=VERTEX_POINT('',#3925);+#3925=CARTESIAN_POINT('',(-7.2,6.22,0.75));+#3926=LINE('',#3927,#3928);+#3927=CARTESIAN_POINT('',(-6.85,6.22,0.75));+#3928=VECTOR('',#3929,1.);+#3929=DIRECTION('',(-1.,1.144237745222E-17,0.));+#3930=ORIENTED_EDGE('',*,*,#3931,.T.);+#3931=EDGE_CURVE('',#3924,#3932,#3934,.T.);+#3932=VERTEX_POINT('',#3933);+#3933=CARTESIAN_POINT('',(-7.298480775301,6.22,0.667364817767));+#3934=CIRCLE('',#3935,0.1);+#3935=AXIS2_PLACEMENT_3D('',#3936,#3937,#3938);+#3936=CARTESIAN_POINT('',(-7.2,6.22,0.65));+#3937=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#3938=DIRECTION('',(8.881784197001E-15,-1.016287272312E-31,1.));+#3939=ORIENTED_EDGE('',*,*,#3940,.T.);+#3940=EDGE_CURVE('',#3932,#3941,#3943,.T.);+#3941=VERTEX_POINT('',#3942);+#3942=CARTESIAN_POINT('',(-7.382385590716,6.22,0.165270364467));+#3943=LINE('',#3933,#3944);+#3944=VECTOR('',#3945,1.);+#3945=DIRECTION('',(-0.16482406317,1.885979144002E-18,-0.986322983713));+#3946=ORIENTED_EDGE('',*,*,#3947,.T.);+#3947=EDGE_CURVE('',#3941,#3948,#3950,.T.);+#3948=VERTEX_POINT('',#3949);+#3949=CARTESIAN_POINT('',(-7.579347141319,6.22,1.387778780781E-16));+#3950=CIRCLE('',#3951,0.2);+#3951=AXIS2_PLACEMENT_3D('',#3952,#3953,#3954);+#3952=CARTESIAN_POINT('',(-7.579347141319,6.22,0.2));+#3953=DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33));+#3954=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#3955=ORIENTED_EDGE('',*,*,#3956,.T.);+#3956=EDGE_CURVE('',#3948,#3957,#3959,.T.);+#3957=VERTEX_POINT('',#3958);+#3958=CARTESIAN_POINT('',(-8.,6.22,1.387778780781E-16));+#3959=LINE('',#3949,#3928);+#3960=ORIENTED_EDGE('',*,*,#3961,.T.);+#3961=EDGE_CURVE('',#3957,#3962,#3964,.T.);+#3962=VERTEX_POINT('',#3963);+#3963=CARTESIAN_POINT('',(-8.,6.22,0.1));+#3964=LINE('',#3958,#1074);+#3965=ORIENTED_EDGE('',*,*,#3966,.T.);+#3966=EDGE_CURVE('',#3962,#3967,#3969,.T.);+#3967=VERTEX_POINT('',#3968);+#3968=CARTESIAN_POINT('',(-7.579347141319,6.22,0.1));+#3969=LINE('',#3963,#277);+#3970=ORIENTED_EDGE('',*,*,#3971,.T.);+#3971=EDGE_CURVE('',#3967,#3972,#3974,.T.);+#3972=VERTEX_POINT('',#3973);+#3973=CARTESIAN_POINT('',(-7.480866366018,6.22,0.182635182233));+#3974=CIRCLE('',#3975,1.E-01);+#3975=AXIS2_PLACEMENT_3D('',#3952,#3937,#3976);+#3976=DIRECTION('',(-8.881784197001E-15,1.016287272312E-31,-1.));+#3977=ORIENTED_EDGE('',*,*,#3978,.T.);+#3978=EDGE_CURVE('',#3972,#3979,#3981,.T.);+#3979=VERTEX_POINT('',#3980);+#3980=CARTESIAN_POINT('',(-7.396961550602,6.22,0.684729635533));+#3981=LINE('',#3973,#3982);+#3982=VECTOR('',#3983,1.);+#3983=DIRECTION('',(0.16482406317,-1.885979144002E-18,0.986322983713));+#3984=ORIENTED_EDGE('',*,*,#3985,.T.);+#3985=EDGE_CURVE('',#3979,#1095,#3986,.T.);+#3986=CIRCLE('',#3987,0.2);+#3987=AXIS2_PLACEMENT_3D('',#3936,#1098,#3988);+#3988=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#3989=PLANE('',#3990);+#3990=AXIS2_PLACEMENT_3D('',#3991,#1098,#13);+#3991=CARTESIAN_POINT('',(-7.414276639233,6.22,0.410238158856));+#3992=ADVANCED_FACE('',(#3993),#4108,.F.);+#3993=FACE_BOUND('',#3994,.F.);+#3994=EDGE_LOOP('',(#3995,#4000,#4001,#4002,#4006,#4010,#4014,#4018,#4022,#4026,#4030,#4034,#4038,#4042,#4046,#4050,#4054,#4058,#4062,#4066,#4070,#4074,#4078,#4082,#4086,#4090,#4094,#4098,#4102,#4105));+#3995=ORIENTED_EDGE('',*,*,#3996,.T.);+#3996=EDGE_CURVE('',#3997,#3906,#3999,.T.);+#3997=VERTEX_POINT('',#3998);+#3998=CARTESIAN_POINT('',(-6.861838234914,-6.755919117457,0.1));+#3999=LINE('',#3998,#269);+#4000=ORIENTED_EDGE('',*,*,#3916,.T.);+#4001=ORIENTED_EDGE('',*,*,#1076,.F.);+#4002=ORIENTED_EDGE('',*,*,#4003,.F.);+#4003=EDGE_CURVE('',#4004,#1070,#1077,.T.);+#4004=VERTEX_POINT('',#4005);+#4005=CARTESIAN_POINT('',(-7.,5.78,0.75));+#4006=ORIENTED_EDGE('',*,*,#4007,.F.);+#4007=EDGE_CURVE('',#4008,#4004,#1077,.T.);+#4008=VERTEX_POINT('',#4009);+#4009=CARTESIAN_POINT('',(-7.,5.22,0.75));+#4010=ORIENTED_EDGE('',*,*,#4011,.F.);+#4011=EDGE_CURVE('',#4012,#4008,#1077,.T.);+#4012=VERTEX_POINT('',#4013);+#4013=CARTESIAN_POINT('',(-7.,4.78,0.75));+#4014=ORIENTED_EDGE('',*,*,#4015,.F.);+#4015=EDGE_CURVE('',#4016,#4012,#1077,.T.);+#4016=VERTEX_POINT('',#4017);+#4017=CARTESIAN_POINT('',(-7.,4.22,0.75));+#4018=ORIENTED_EDGE('',*,*,#4019,.F.);+#4019=EDGE_CURVE('',#4020,#4016,#1077,.T.);+#4020=VERTEX_POINT('',#4021);+#4021=CARTESIAN_POINT('',(-7.,3.78,0.75));+#4022=ORIENTED_EDGE('',*,*,#4023,.F.);+#4023=EDGE_CURVE('',#4024,#4020,#1077,.T.);+#4024=VERTEX_POINT('',#4025);+#4025=CARTESIAN_POINT('',(-7.,3.22,0.75));+#4026=ORIENTED_EDGE('',*,*,#4027,.F.);+#4027=EDGE_CURVE('',#4028,#4024,#1077,.T.);+#4028=VERTEX_POINT('',#4029);+#4029=CARTESIAN_POINT('',(-7.,2.78,0.75));+#4030=ORIENTED_EDGE('',*,*,#4031,.F.);+#4031=EDGE_CURVE('',#4032,#4028,#1077,.T.);+#4032=VERTEX_POINT('',#4033);+#4033=CARTESIAN_POINT('',(-7.,2.22,0.75));+#4034=ORIENTED_EDGE('',*,*,#4035,.F.);+#4035=EDGE_CURVE('',#4036,#4032,#1077,.T.);+#4036=VERTEX_POINT('',#4037);+#4037=CARTESIAN_POINT('',(-7.,1.78,0.75));+#4038=ORIENTED_EDGE('',*,*,#4039,.F.);+#4039=EDGE_CURVE('',#4040,#4036,#1077,.T.);+#4040=VERTEX_POINT('',#4041);+#4041=CARTESIAN_POINT('',(-7.,1.22,0.75));+#4042=ORIENTED_EDGE('',*,*,#4043,.F.);+#4043=EDGE_CURVE('',#4044,#4040,#1077,.T.);+#4044=VERTEX_POINT('',#4045);+#4045=CARTESIAN_POINT('',(-7.,0.78,0.75));+#4046=ORIENTED_EDGE('',*,*,#4047,.F.);+#4047=EDGE_CURVE('',#4048,#4044,#1077,.T.);+#4048=VERTEX_POINT('',#4049);+#4049=CARTESIAN_POINT('',(-7.,0.22,0.75));+#4050=ORIENTED_EDGE('',*,*,#4051,.F.);+#4051=EDGE_CURVE('',#4052,#4048,#1077,.T.);+#4052=VERTEX_POINT('',#4053);+#4053=CARTESIAN_POINT('',(-7.,-0.22,0.75));+#4054=ORIENTED_EDGE('',*,*,#4055,.F.);+#4055=EDGE_CURVE('',#4056,#4052,#1077,.T.);+#4056=VERTEX_POINT('',#4057);+#4057=CARTESIAN_POINT('',(-7.,-0.78,0.75));+#4058=ORIENTED_EDGE('',*,*,#4059,.F.);+#4059=EDGE_CURVE('',#4060,#4056,#1077,.T.);+#4060=VERTEX_POINT('',#4061);+#4061=CARTESIAN_POINT('',(-7.,-1.22,0.75));+#4062=ORIENTED_EDGE('',*,*,#4063,.F.);+#4063=EDGE_CURVE('',#4064,#4060,#1077,.T.);+#4064=VERTEX_POINT('',#4065);+#4065=CARTESIAN_POINT('',(-7.,-1.78,0.75));+#4066=ORIENTED_EDGE('',*,*,#4067,.F.);+#4067=EDGE_CURVE('',#4068,#4064,#1077,.T.);+#4068=VERTEX_POINT('',#4069);+#4069=CARTESIAN_POINT('',(-7.,-2.22,0.75));+#4070=ORIENTED_EDGE('',*,*,#4071,.F.);+#4071=EDGE_CURVE('',#4072,#4068,#1077,.T.);+#4072=VERTEX_POINT('',#4073);+#4073=CARTESIAN_POINT('',(-7.,-2.78,0.75));+#4074=ORIENTED_EDGE('',*,*,#4075,.F.);+#4075=EDGE_CURVE('',#4076,#4072,#1077,.T.);+#4076=VERTEX_POINT('',#4077);+#4077=CARTESIAN_POINT('',(-7.,-3.22,0.75));+#4078=ORIENTED_EDGE('',*,*,#4079,.F.);+#4079=EDGE_CURVE('',#4080,#4076,#1077,.T.);+#4080=VERTEX_POINT('',#4081);+#4081=CARTESIAN_POINT('',(-7.,-3.78,0.75));+#4082=ORIENTED_EDGE('',*,*,#4083,.F.);+#4083=EDGE_CURVE('',#4084,#4080,#1077,.T.);+#4084=VERTEX_POINT('',#4085);+#4085=CARTESIAN_POINT('',(-7.,-4.22,0.75));+#4086=ORIENTED_EDGE('',*,*,#4087,.F.);+#4087=EDGE_CURVE('',#4088,#4084,#1077,.T.);+#4088=VERTEX_POINT('',#4089);+#4089=CARTESIAN_POINT('',(-7.,-4.78,0.75));+#4090=ORIENTED_EDGE('',*,*,#4091,.F.);+#4091=EDGE_CURVE('',#4092,#4088,#1077,.T.);+#4092=VERTEX_POINT('',#4093);+#4093=CARTESIAN_POINT('',(-7.,-5.22,0.75));+#4094=ORIENTED_EDGE('',*,*,#4095,.F.);+#4095=EDGE_CURVE('',#4096,#4092,#1077,.T.);+#4096=VERTEX_POINT('',#4097);+#4097=CARTESIAN_POINT('',(-7.,-5.78,0.75));+#4098=ORIENTED_EDGE('',*,*,#4099,.F.);+#4099=EDGE_CURVE('',#4100,#4096,#1077,.T.);+#4100=VERTEX_POINT('',#4101);+#4101=CARTESIAN_POINT('',(-7.,-6.22,0.75));+#4102=ORIENTED_EDGE('',*,*,#4103,.F.);+#4103=EDGE_CURVE('',#4104,#4100,#1077,.T.);+#4104=VERTEX_POINT('',#1078);+#4105=ORIENTED_EDGE('',*,*,#4106,.F.);+#4106=EDGE_CURVE('',#3997,#4104,#4107,.T.);+#4107=B_SPLINE_CURVE_WITH_KNOTS('',1,(#3998,#1078),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4108=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#3998,#1078),(#3907,#1052)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4109=ADVANCED_FACE('',(#4110),#4172,.F.);+#4110=FACE_BOUND('',#4111,.F.);+#4111=EDGE_LOOP('',(#4112,#4116,#4122,#4129,#4134,#4141,#4146,#4151,#4156,#4162,#4167,#4171));+#4112=ORIENTED_EDGE('',*,*,#4113,.F.);+#4113=EDGE_CURVE('',#4004,#1090,#4114,.T.);+#4114=LINE('',#4115,#1074);+#4115=CARTESIAN_POINT('',(-7.,5.78,0.630119079428));+#4116=ORIENTED_EDGE('',*,*,#4117,.T.);+#4117=EDGE_CURVE('',#4004,#4118,#4120,.T.);+#4118=VERTEX_POINT('',#4119);+#4119=CARTESIAN_POINT('',(-7.2,5.78,0.75));+#4120=LINE('',#4121,#3928);+#4121=CARTESIAN_POINT('',(-6.85,5.78,0.75));+#4122=ORIENTED_EDGE('',*,*,#4123,.T.);+#4123=EDGE_CURVE('',#4118,#4124,#4126,.T.);+#4124=VERTEX_POINT('',#4125);+#4125=CARTESIAN_POINT('',(-7.298480775301,5.78,0.667364817767));+#4126=CIRCLE('',#4127,0.1);+#4127=AXIS2_PLACEMENT_3D('',#4128,#3937,#3938);+#4128=CARTESIAN_POINT('',(-7.2,5.78,0.65));+#4129=ORIENTED_EDGE('',*,*,#4130,.T.);+#4130=EDGE_CURVE('',#4124,#4131,#4133,.T.);+#4131=VERTEX_POINT('',#4132);+#4132=CARTESIAN_POINT('',(-7.382385590716,5.78,0.165270364467));+#4133=LINE('',#4125,#3944);+#4134=ORIENTED_EDGE('',*,*,#4135,.T.);+#4135=EDGE_CURVE('',#4131,#4136,#4138,.T.);+#4136=VERTEX_POINT('',#4137);+#4137=CARTESIAN_POINT('',(-7.579347141319,5.78,1.387778780781E-16));+#4138=CIRCLE('',#4139,0.2);+#4139=AXIS2_PLACEMENT_3D('',#4140,#3953,#3954);+#4140=CARTESIAN_POINT('',(-7.579347141319,5.78,0.2));+#4141=ORIENTED_EDGE('',*,*,#4142,.T.);+#4142=EDGE_CURVE('',#4136,#4143,#4145,.T.);+#4143=VERTEX_POINT('',#4144);+#4144=CARTESIAN_POINT('',(-8.,5.78,1.387778780781E-16));+#4145=LINE('',#4137,#3928);+#4146=ORIENTED_EDGE('',*,*,#4147,.T.);+#4147=EDGE_CURVE('',#4143,#4148,#4150,.T.);+#4148=VERTEX_POINT('',#4149);+#4149=CARTESIAN_POINT('',(-8.,5.78,0.1));+#4150=LINE('',#4144,#1074);+#4151=ORIENTED_EDGE('',*,*,#4152,.T.);+#4152=EDGE_CURVE('',#4148,#4153,#4155,.T.);+#4153=VERTEX_POINT('',#4154);+#4154=CARTESIAN_POINT('',(-7.579347141319,5.78,0.1));+#4155=LINE('',#4149,#277);+#4156=ORIENTED_EDGE('',*,*,#4157,.T.);+#4157=EDGE_CURVE('',#4153,#4158,#4160,.T.);+#4158=VERTEX_POINT('',#4159);+#4159=CARTESIAN_POINT('',(-7.480866366018,5.78,0.182635182233));+#4160=CIRCLE('',#4161,1.E-01);+#4161=AXIS2_PLACEMENT_3D('',#4140,#3937,#3976);+#4162=ORIENTED_EDGE('',*,*,#4163,.T.);+#4163=EDGE_CURVE('',#4158,#4164,#4166,.T.);+#4164=VERTEX_POINT('',#4165);+#4165=CARTESIAN_POINT('',(-7.396961550602,5.78,0.684729635533));+#4166=LINE('',#4159,#3982);+#4167=ORIENTED_EDGE('',*,*,#4168,.T.);+#4168=EDGE_CURVE('',#4164,#1088,#4169,.T.);+#4169=CIRCLE('',#4170,0.2);+#4170=AXIS2_PLACEMENT_3D('',#4128,#1098,#3988);+#4171=ORIENTED_EDGE('',*,*,#1087,.T.);+#4172=PLANE('',#4173);+#4173=AXIS2_PLACEMENT_3D('',#4174,#1098,#13);+#4174=CARTESIAN_POINT('',(-7.414276639233,5.78,0.410238158856));+#4175=ADVANCED_FACE('',(#4176),#283,.F.);+#4176=FACE_BOUND('',#4177,.F.);+#4177=EDGE_LOOP('',(#4178,#4182,#4183,#4184));+#4178=ORIENTED_EDGE('',*,*,#4179,.T.);+#4179=EDGE_CURVE('',#4180,#1090,#281,.T.);+#4180=VERTEX_POINT('',#4181);+#4181=CARTESIAN_POINT('',(-7.,5.22,0.85));+#4182=ORIENTED_EDGE('',*,*,#1107,.T.);+#4183=ORIENTED_EDGE('',*,*,#1226,.F.);+#4184=ORIENTED_EDGE('',*,*,#4185,.F.);+#4185=EDGE_CURVE('',#4180,#1223,#4186,.T.);+#4186=LINE('',#4187,#277);+#4187=CARTESIAN_POINT('',(-7.2,5.22,0.85));+#4188=ADVANCED_FACE('',(#4189),#4196,.T.);+#4189=FACE_BOUND('',#4190,.F.);+#4190=EDGE_LOOP('',(#4191,#3984,#4194,#4195));+#4191=ORIENTED_EDGE('',*,*,#4192,.T.);+#4192=EDGE_CURVE('',#4164,#3979,#4193,.T.);+#4193=LINE('',#4165,#1097);+#4194=ORIENTED_EDGE('',*,*,#1094,.F.);+#4195=ORIENTED_EDGE('',*,*,#4168,.F.);+#4196=CYLINDRICAL_SURFACE('',#4197,0.2);+#4197=AXIS2_PLACEMENT_3D('',#4128,#3937,#3988);+#4198=ADVANCED_FACE('',(#4199),#283,.F.);+#4199=FACE_BOUND('',#4200,.F.);+#4200=EDGE_LOOP('',(#4201,#4206,#4210,#4211,#4218,#4222,#4228,#4232));+#4201=ORIENTED_EDGE('',*,*,#4202,.T.);+#4202=EDGE_CURVE('',#4203,#4204,#281,.T.);+#4203=VERTEX_POINT('',#282);+#4204=VERTEX_POINT('',#4205);+#4205=CARTESIAN_POINT('',(-7.,-6.22,0.85));+#4206=ORIENTED_EDGE('',*,*,#4207,.T.);+#4207=EDGE_CURVE('',#4204,#1131,#4208,.T.);+#4208=LINE('',#4209,#277);+#4209=CARTESIAN_POINT('',(-7.2,-6.22,0.85));+#4210=ORIENTED_EDGE('',*,*,#1130,.F.);+#4211=ORIENTED_EDGE('',*,*,#4212,.F.);+#4212=EDGE_CURVE('',#4213,#1126,#4215,.T.);+#4213=VERTEX_POINT('',#4214);+#4214=CARTESIAN_POINT('',(-6.7875,-6.925,0.85));+#4215=LINE('',#4214,#4216);+#4216=VECTOR('',#4217,1.);+#4217=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#4218=ORIENTED_EDGE('',*,*,#4219,.F.);+#4219=EDGE_CURVE('',#4220,#4213,#3788,.T.);+#4220=VERTEX_POINT('',#4221);+#4221=CARTESIAN_POINT('',(-6.22,-6.925,0.85));+#4222=ORIENTED_EDGE('',*,*,#4223,.F.);+#4223=EDGE_CURVE('',#4224,#4220,#4226,.T.);+#4224=VERTEX_POINT('',#4225);+#4225=CARTESIAN_POINT('',(-6.22,-7.,0.85));+#4226=LINE('',#4227,#3784);+#4227=CARTESIAN_POINT('',(-6.22,-7.2,0.85));+#4228=ORIENTED_EDGE('',*,*,#4229,.T.);+#4229=EDGE_CURVE('',#4224,#4230,#3777,.T.);+#4230=VERTEX_POINT('',#4231);+#4231=CARTESIAN_POINT('',(-6.825,-7.,0.85));+#4232=ORIENTED_EDGE('',*,*,#4233,.T.);+#4233=EDGE_CURVE('',#4230,#4203,#4234,.T.);+#4234=LINE('',#4231,#4216);+#4235=ADVANCED_FACE('',(#4236),#4255,.F.);+#4236=FACE_BOUND('',#4237,.F.);+#4237=EDGE_LOOP('',(#4238,#4241,#4246,#4251,#4253,#4254));+#4238=ORIENTED_EDGE('',*,*,#4239,.F.);+#4239=EDGE_CURVE('',#4240,#4204,#4208,.T.);+#4240=VERTEX_POINT('',#4209);+#4241=ORIENTED_EDGE('',*,*,#4242,.T.);+#4242=EDGE_CURVE('',#4240,#4243,#4245,.T.);+#4243=VERTEX_POINT('',#4244);+#4244=CARTESIAN_POINT('',(-7.2,-5.78,0.85));+#4245=LINE('',#4209,#1097);+#4246=ORIENTED_EDGE('',*,*,#4247,.T.);+#4247=EDGE_CURVE('',#4243,#4248,#4250,.T.);+#4248=VERTEX_POINT('',#4249);+#4249=CARTESIAN_POINT('',(-7.,-5.78,0.85));+#4250=LINE('',#4244,#277);+#4251=ORIENTED_EDGE('',*,*,#4252,.T.);+#4252=EDGE_CURVE('',#4248,#1135,#4250,.T.);+#4253=ORIENTED_EDGE('',*,*,#1134,.F.);+#4254=ORIENTED_EDGE('',*,*,#4207,.F.);+#4255=PLANE('',#4256);+#4256=AXIS2_PLACEMENT_3D('',#4209,#312,#278);+#4257=ADVANCED_FACE('',(#4258),#283,.F.);+#4258=FACE_BOUND('',#4259,.F.);+#4259=EDGE_LOOP('',(#4260,#4264,#4268,#4269));+#4260=ORIENTED_EDGE('',*,*,#4261,.T.);+#4261=EDGE_CURVE('',#4248,#4262,#281,.T.);+#4262=VERTEX_POINT('',#4263);+#4263=CARTESIAN_POINT('',(-7.,-5.22,0.85));+#4264=ORIENTED_EDGE('',*,*,#4265,.T.);+#4265=EDGE_CURVE('',#4262,#1139,#4266,.T.);+#4266=LINE('',#4267,#277);+#4267=CARTESIAN_POINT('',(-7.2,-5.22,0.85));+#4268=ORIENTED_EDGE('',*,*,#1138,.F.);+#4269=ORIENTED_EDGE('',*,*,#4252,.F.);+#4270=ADVANCED_FACE('',(#4271),#4290,.F.);+#4271=FACE_BOUND('',#4272,.F.);+#4272=EDGE_LOOP('',(#4273,#4276,#4281,#4286,#4288,#4289));+#4273=ORIENTED_EDGE('',*,*,#4274,.F.);+#4274=EDGE_CURVE('',#4275,#4262,#4266,.T.);+#4275=VERTEX_POINT('',#4267);+#4276=ORIENTED_EDGE('',*,*,#4277,.T.);+#4277=EDGE_CURVE('',#4275,#4278,#4280,.T.);+#4278=VERTEX_POINT('',#4279);+#4279=CARTESIAN_POINT('',(-7.2,-4.78,0.85));+#4280=LINE('',#4267,#1097);+#4281=ORIENTED_EDGE('',*,*,#4282,.T.);+#4282=EDGE_CURVE('',#4278,#4283,#4285,.T.);+#4283=VERTEX_POINT('',#4284);+#4284=CARTESIAN_POINT('',(-7.,-4.78,0.85));+#4285=LINE('',#4279,#277);+#4286=ORIENTED_EDGE('',*,*,#4287,.T.);+#4287=EDGE_CURVE('',#4283,#1143,#4285,.T.);+#4288=ORIENTED_EDGE('',*,*,#1142,.F.);+#4289=ORIENTED_EDGE('',*,*,#4265,.F.);+#4290=PLANE('',#4291);+#4291=AXIS2_PLACEMENT_3D('',#4267,#312,#278);+#4292=ADVANCED_FACE('',(#4293),#283,.F.);+#4293=FACE_BOUND('',#4294,.F.);+#4294=EDGE_LOOP('',(#4295,#4299,#4303,#4304));+#4295=ORIENTED_EDGE('',*,*,#4296,.T.);+#4296=EDGE_CURVE('',#4283,#4297,#281,.T.);+#4297=VERTEX_POINT('',#4298);+#4298=CARTESIAN_POINT('',(-7.,-4.22,0.85));+#4299=ORIENTED_EDGE('',*,*,#4300,.T.);+#4300=EDGE_CURVE('',#4297,#1147,#4301,.T.);+#4301=LINE('',#4302,#277);+#4302=CARTESIAN_POINT('',(-7.2,-4.22,0.85));+#4303=ORIENTED_EDGE('',*,*,#1146,.F.);+#4304=ORIENTED_EDGE('',*,*,#4287,.F.);+#4305=ADVANCED_FACE('',(#4306),#4325,.F.);+#4306=FACE_BOUND('',#4307,.F.);+#4307=EDGE_LOOP('',(#4308,#4311,#4316,#4321,#4323,#4324));+#4308=ORIENTED_EDGE('',*,*,#4309,.F.);+#4309=EDGE_CURVE('',#4310,#4297,#4301,.T.);+#4310=VERTEX_POINT('',#4302);+#4311=ORIENTED_EDGE('',*,*,#4312,.T.);+#4312=EDGE_CURVE('',#4310,#4313,#4315,.T.);+#4313=VERTEX_POINT('',#4314);+#4314=CARTESIAN_POINT('',(-7.2,-3.78,0.85));+#4315=LINE('',#4302,#1097);+#4316=ORIENTED_EDGE('',*,*,#4317,.T.);+#4317=EDGE_CURVE('',#4313,#4318,#4320,.T.);+#4318=VERTEX_POINT('',#4319);+#4319=CARTESIAN_POINT('',(-7.,-3.78,0.85));+#4320=LINE('',#4314,#277);+#4321=ORIENTED_EDGE('',*,*,#4322,.T.);+#4322=EDGE_CURVE('',#4318,#1151,#4320,.T.);+#4323=ORIENTED_EDGE('',*,*,#1150,.F.);+#4324=ORIENTED_EDGE('',*,*,#4300,.F.);+#4325=PLANE('',#4326);+#4326=AXIS2_PLACEMENT_3D('',#4302,#312,#278);+#4327=ADVANCED_FACE('',(#4328),#283,.F.);+#4328=FACE_BOUND('',#4329,.F.);+#4329=EDGE_LOOP('',(#4330,#4334,#4338,#4339));+#4330=ORIENTED_EDGE('',*,*,#4331,.T.);+#4331=EDGE_CURVE('',#4318,#4332,#281,.T.);+#4332=VERTEX_POINT('',#4333);+#4333=CARTESIAN_POINT('',(-7.,-3.22,0.85));+#4334=ORIENTED_EDGE('',*,*,#4335,.T.);+#4335=EDGE_CURVE('',#4332,#1155,#4336,.T.);+#4336=LINE('',#4337,#277);+#4337=CARTESIAN_POINT('',(-7.2,-3.22,0.85));+#4338=ORIENTED_EDGE('',*,*,#1154,.F.);+#4339=ORIENTED_EDGE('',*,*,#4322,.F.);+#4340=ADVANCED_FACE('',(#4341),#4360,.F.);+#4341=FACE_BOUND('',#4342,.F.);+#4342=EDGE_LOOP('',(#4343,#4346,#4351,#4356,#4358,#4359));+#4343=ORIENTED_EDGE('',*,*,#4344,.F.);+#4344=EDGE_CURVE('',#4345,#4332,#4336,.T.);+#4345=VERTEX_POINT('',#4337);+#4346=ORIENTED_EDGE('',*,*,#4347,.T.);+#4347=EDGE_CURVE('',#4345,#4348,#4350,.T.);+#4348=VERTEX_POINT('',#4349);+#4349=CARTESIAN_POINT('',(-7.2,-2.78,0.85));+#4350=LINE('',#4337,#1097);+#4351=ORIENTED_EDGE('',*,*,#4352,.T.);+#4352=EDGE_CURVE('',#4348,#4353,#4355,.T.);+#4353=VERTEX_POINT('',#4354);+#4354=CARTESIAN_POINT('',(-7.,-2.78,0.85));+#4355=LINE('',#4349,#277);+#4356=ORIENTED_EDGE('',*,*,#4357,.T.);+#4357=EDGE_CURVE('',#4353,#1159,#4355,.T.);+#4358=ORIENTED_EDGE('',*,*,#1158,.F.);+#4359=ORIENTED_EDGE('',*,*,#4335,.F.);+#4360=PLANE('',#4361);+#4361=AXIS2_PLACEMENT_3D('',#4337,#312,#278);+#4362=ADVANCED_FACE('',(#4363),#283,.F.);+#4363=FACE_BOUND('',#4364,.F.);+#4364=EDGE_LOOP('',(#4365,#4369,#4373,#4374));+#4365=ORIENTED_EDGE('',*,*,#4366,.T.);+#4366=EDGE_CURVE('',#4353,#4367,#281,.T.);+#4367=VERTEX_POINT('',#4368);+#4368=CARTESIAN_POINT('',(-7.,-2.22,0.85));+#4369=ORIENTED_EDGE('',*,*,#4370,.T.);+#4370=EDGE_CURVE('',#4367,#1163,#4371,.T.);+#4371=LINE('',#4372,#277);+#4372=CARTESIAN_POINT('',(-7.2,-2.22,0.85));+#4373=ORIENTED_EDGE('',*,*,#1162,.F.);+#4374=ORIENTED_EDGE('',*,*,#4357,.F.);+#4375=ADVANCED_FACE('',(#4376),#4395,.F.);+#4376=FACE_BOUND('',#4377,.F.);+#4377=EDGE_LOOP('',(#4378,#4381,#4386,#4391,#4393,#4394));+#4378=ORIENTED_EDGE('',*,*,#4379,.F.);+#4379=EDGE_CURVE('',#4380,#4367,#4371,.T.);+#4380=VERTEX_POINT('',#4372);+#4381=ORIENTED_EDGE('',*,*,#4382,.T.);+#4382=EDGE_CURVE('',#4380,#4383,#4385,.T.);+#4383=VERTEX_POINT('',#4384);+#4384=CARTESIAN_POINT('',(-7.2,-1.78,0.85));+#4385=LINE('',#4372,#1097);+#4386=ORIENTED_EDGE('',*,*,#4387,.T.);+#4387=EDGE_CURVE('',#4383,#4388,#4390,.T.);+#4388=VERTEX_POINT('',#4389);+#4389=CARTESIAN_POINT('',(-7.,-1.78,0.85));+#4390=LINE('',#4384,#277);+#4391=ORIENTED_EDGE('',*,*,#4392,.T.);+#4392=EDGE_CURVE('',#4388,#1167,#4390,.T.);+#4393=ORIENTED_EDGE('',*,*,#1166,.F.);+#4394=ORIENTED_EDGE('',*,*,#4370,.F.);+#4395=PLANE('',#4396);+#4396=AXIS2_PLACEMENT_3D('',#4372,#312,#278);+#4397=ADVANCED_FACE('',(#4398),#283,.F.);+#4398=FACE_BOUND('',#4399,.F.);+#4399=EDGE_LOOP('',(#4400,#4404,#4408,#4409));+#4400=ORIENTED_EDGE('',*,*,#4401,.T.);+#4401=EDGE_CURVE('',#4388,#4402,#281,.T.);+#4402=VERTEX_POINT('',#4403);+#4403=CARTESIAN_POINT('',(-7.,-1.22,0.85));+#4404=ORIENTED_EDGE('',*,*,#4405,.T.);+#4405=EDGE_CURVE('',#4402,#1171,#4406,.T.);+#4406=LINE('',#4407,#277);+#4407=CARTESIAN_POINT('',(-7.2,-1.22,0.85));+#4408=ORIENTED_EDGE('',*,*,#1170,.F.);+#4409=ORIENTED_EDGE('',*,*,#4392,.F.);+#4410=ADVANCED_FACE('',(#4411),#4430,.F.);+#4411=FACE_BOUND('',#4412,.F.);+#4412=EDGE_LOOP('',(#4413,#4416,#4421,#4426,#4428,#4429));+#4413=ORIENTED_EDGE('',*,*,#4414,.F.);+#4414=EDGE_CURVE('',#4415,#4402,#4406,.T.);+#4415=VERTEX_POINT('',#4407);+#4416=ORIENTED_EDGE('',*,*,#4417,.T.);+#4417=EDGE_CURVE('',#4415,#4418,#4420,.T.);+#4418=VERTEX_POINT('',#4419);+#4419=CARTESIAN_POINT('',(-7.2,-0.78,0.85));+#4420=LINE('',#4407,#1097);+#4421=ORIENTED_EDGE('',*,*,#4422,.T.);+#4422=EDGE_CURVE('',#4418,#4423,#4425,.T.);+#4423=VERTEX_POINT('',#4424);+#4424=CARTESIAN_POINT('',(-7.,-0.78,0.85));+#4425=LINE('',#4419,#277);+#4426=ORIENTED_EDGE('',*,*,#4427,.T.);+#4427=EDGE_CURVE('',#4423,#1175,#4425,.T.);+#4428=ORIENTED_EDGE('',*,*,#1174,.F.);+#4429=ORIENTED_EDGE('',*,*,#4405,.F.);+#4430=PLANE('',#4431);+#4431=AXIS2_PLACEMENT_3D('',#4407,#312,#278);+#4432=ADVANCED_FACE('',(#4433),#283,.F.);+#4433=FACE_BOUND('',#4434,.F.);+#4434=EDGE_LOOP('',(#4435,#4439,#4443,#4444));+#4435=ORIENTED_EDGE('',*,*,#4436,.T.);+#4436=EDGE_CURVE('',#4423,#4437,#281,.T.);+#4437=VERTEX_POINT('',#4438);+#4438=CARTESIAN_POINT('',(-7.,-0.22,0.85));+#4439=ORIENTED_EDGE('',*,*,#4440,.T.);+#4440=EDGE_CURVE('',#4437,#1179,#4441,.T.);+#4441=LINE('',#4442,#277);+#4442=CARTESIAN_POINT('',(-7.2,-0.22,0.85));+#4443=ORIENTED_EDGE('',*,*,#1178,.F.);+#4444=ORIENTED_EDGE('',*,*,#4427,.F.);+#4445=ADVANCED_FACE('',(#4446),#4465,.F.);+#4446=FACE_BOUND('',#4447,.F.);+#4447=EDGE_LOOP('',(#4448,#4451,#4456,#4461,#4463,#4464));+#4448=ORIENTED_EDGE('',*,*,#4449,.F.);+#4449=EDGE_CURVE('',#4450,#4437,#4441,.T.);+#4450=VERTEX_POINT('',#4442);+#4451=ORIENTED_EDGE('',*,*,#4452,.T.);+#4452=EDGE_CURVE('',#4450,#4453,#4455,.T.);+#4453=VERTEX_POINT('',#4454);+#4454=CARTESIAN_POINT('',(-7.2,0.22,0.85));+#4455=LINE('',#4442,#1097);+#4456=ORIENTED_EDGE('',*,*,#4457,.T.);+#4457=EDGE_CURVE('',#4453,#4458,#4460,.T.);+#4458=VERTEX_POINT('',#4459);+#4459=CARTESIAN_POINT('',(-7.,0.22,0.85));+#4460=LINE('',#4454,#277);+#4461=ORIENTED_EDGE('',*,*,#4462,.T.);+#4462=EDGE_CURVE('',#4458,#1183,#4460,.T.);+#4463=ORIENTED_EDGE('',*,*,#1182,.F.);+#4464=ORIENTED_EDGE('',*,*,#4440,.F.);+#4465=PLANE('',#4466);+#4466=AXIS2_PLACEMENT_3D('',#4442,#312,#278);+#4467=ADVANCED_FACE('',(#4468),#283,.F.);+#4468=FACE_BOUND('',#4469,.F.);+#4469=EDGE_LOOP('',(#4470,#4474,#4478,#4479));+#4470=ORIENTED_EDGE('',*,*,#4471,.T.);+#4471=EDGE_CURVE('',#4458,#4472,#281,.T.);+#4472=VERTEX_POINT('',#4473);+#4473=CARTESIAN_POINT('',(-7.,0.78,0.85));+#4474=ORIENTED_EDGE('',*,*,#4475,.T.);+#4475=EDGE_CURVE('',#4472,#1187,#4476,.T.);+#4476=LINE('',#4477,#277);+#4477=CARTESIAN_POINT('',(-7.2,0.78,0.85));+#4478=ORIENTED_EDGE('',*,*,#1186,.F.);+#4479=ORIENTED_EDGE('',*,*,#4462,.F.);+#4480=ADVANCED_FACE('',(#4481),#4500,.F.);+#4481=FACE_BOUND('',#4482,.F.);+#4482=EDGE_LOOP('',(#4483,#4486,#4491,#4496,#4498,#4499));+#4483=ORIENTED_EDGE('',*,*,#4484,.F.);+#4484=EDGE_CURVE('',#4485,#4472,#4476,.T.);+#4485=VERTEX_POINT('',#4477);+#4486=ORIENTED_EDGE('',*,*,#4487,.T.);+#4487=EDGE_CURVE('',#4485,#4488,#4490,.T.);+#4488=VERTEX_POINT('',#4489);+#4489=CARTESIAN_POINT('',(-7.2,1.22,0.85));+#4490=LINE('',#4477,#1097);+#4491=ORIENTED_EDGE('',*,*,#4492,.T.);+#4492=EDGE_CURVE('',#4488,#4493,#4495,.T.);+#4493=VERTEX_POINT('',#4494);+#4494=CARTESIAN_POINT('',(-7.,1.22,0.85));+#4495=LINE('',#4489,#277);+#4496=ORIENTED_EDGE('',*,*,#4497,.T.);+#4497=EDGE_CURVE('',#4493,#1191,#4495,.T.);+#4498=ORIENTED_EDGE('',*,*,#1190,.F.);+#4499=ORIENTED_EDGE('',*,*,#4475,.F.);+#4500=PLANE('',#4501);+#4501=AXIS2_PLACEMENT_3D('',#4477,#312,#278);+#4502=ADVANCED_FACE('',(#4503),#283,.F.);+#4503=FACE_BOUND('',#4504,.F.);+#4504=EDGE_LOOP('',(#4505,#4509,#4513,#4514));+#4505=ORIENTED_EDGE('',*,*,#4506,.T.);+#4506=EDGE_CURVE('',#4493,#4507,#281,.T.);+#4507=VERTEX_POINT('',#4508);+#4508=CARTESIAN_POINT('',(-7.,1.78,0.85));+#4509=ORIENTED_EDGE('',*,*,#4510,.T.);+#4510=EDGE_CURVE('',#4507,#1195,#4511,.T.);+#4511=LINE('',#4512,#277);+#4512=CARTESIAN_POINT('',(-7.2,1.78,0.85));+#4513=ORIENTED_EDGE('',*,*,#1194,.F.);+#4514=ORIENTED_EDGE('',*,*,#4497,.F.);+#4515=ADVANCED_FACE('',(#4516),#4535,.F.);+#4516=FACE_BOUND('',#4517,.F.);+#4517=EDGE_LOOP('',(#4518,#4521,#4526,#4531,#4533,#4534));+#4518=ORIENTED_EDGE('',*,*,#4519,.F.);+#4519=EDGE_CURVE('',#4520,#4507,#4511,.T.);+#4520=VERTEX_POINT('',#4512);+#4521=ORIENTED_EDGE('',*,*,#4522,.T.);+#4522=EDGE_CURVE('',#4520,#4523,#4525,.T.);+#4523=VERTEX_POINT('',#4524);+#4524=CARTESIAN_POINT('',(-7.2,2.22,0.85));+#4525=LINE('',#4512,#1097);+#4526=ORIENTED_EDGE('',*,*,#4527,.T.);+#4527=EDGE_CURVE('',#4523,#4528,#4530,.T.);+#4528=VERTEX_POINT('',#4529);+#4529=CARTESIAN_POINT('',(-7.,2.22,0.85));+#4530=LINE('',#4524,#277);+#4531=ORIENTED_EDGE('',*,*,#4532,.T.);+#4532=EDGE_CURVE('',#4528,#1199,#4530,.T.);+#4533=ORIENTED_EDGE('',*,*,#1198,.F.);+#4534=ORIENTED_EDGE('',*,*,#4510,.F.);+#4535=PLANE('',#4536);+#4536=AXIS2_PLACEMENT_3D('',#4512,#312,#278);+#4537=ADVANCED_FACE('',(#4538),#283,.F.);+#4538=FACE_BOUND('',#4539,.F.);+#4539=EDGE_LOOP('',(#4540,#4544,#4548,#4549));+#4540=ORIENTED_EDGE('',*,*,#4541,.T.);+#4541=EDGE_CURVE('',#4528,#4542,#281,.T.);+#4542=VERTEX_POINT('',#4543);+#4543=CARTESIAN_POINT('',(-7.,2.78,0.85));+#4544=ORIENTED_EDGE('',*,*,#4545,.T.);+#4545=EDGE_CURVE('',#4542,#1203,#4546,.T.);+#4546=LINE('',#4547,#277);+#4547=CARTESIAN_POINT('',(-7.2,2.78,0.85));+#4548=ORIENTED_EDGE('',*,*,#1202,.F.);+#4549=ORIENTED_EDGE('',*,*,#4532,.F.);+#4550=ADVANCED_FACE('',(#4551),#4570,.F.);+#4551=FACE_BOUND('',#4552,.F.);+#4552=EDGE_LOOP('',(#4553,#4556,#4561,#4566,#4568,#4569));+#4553=ORIENTED_EDGE('',*,*,#4554,.F.);+#4554=EDGE_CURVE('',#4555,#4542,#4546,.T.);+#4555=VERTEX_POINT('',#4547);+#4556=ORIENTED_EDGE('',*,*,#4557,.T.);+#4557=EDGE_CURVE('',#4555,#4558,#4560,.T.);+#4558=VERTEX_POINT('',#4559);+#4559=CARTESIAN_POINT('',(-7.2,3.22,0.85));+#4560=LINE('',#4547,#1097);+#4561=ORIENTED_EDGE('',*,*,#4562,.T.);+#4562=EDGE_CURVE('',#4558,#4563,#4565,.T.);+#4563=VERTEX_POINT('',#4564);+#4564=CARTESIAN_POINT('',(-7.,3.22,0.85));+#4565=LINE('',#4559,#277);+#4566=ORIENTED_EDGE('',*,*,#4567,.T.);+#4567=EDGE_CURVE('',#4563,#1207,#4565,.T.);+#4568=ORIENTED_EDGE('',*,*,#1206,.F.);+#4569=ORIENTED_EDGE('',*,*,#4545,.F.);+#4570=PLANE('',#4571);+#4571=AXIS2_PLACEMENT_3D('',#4547,#312,#278);+#4572=ADVANCED_FACE('',(#4573),#283,.F.);+#4573=FACE_BOUND('',#4574,.F.);+#4574=EDGE_LOOP('',(#4575,#4579,#4583,#4584));+#4575=ORIENTED_EDGE('',*,*,#4576,.T.);+#4576=EDGE_CURVE('',#4563,#4577,#281,.T.);+#4577=VERTEX_POINT('',#4578);+#4578=CARTESIAN_POINT('',(-7.,3.78,0.85));+#4579=ORIENTED_EDGE('',*,*,#4580,.T.);+#4580=EDGE_CURVE('',#4577,#1211,#4581,.T.);+#4581=LINE('',#4582,#277);+#4582=CARTESIAN_POINT('',(-7.2,3.78,0.85));+#4583=ORIENTED_EDGE('',*,*,#1210,.F.);+#4584=ORIENTED_EDGE('',*,*,#4567,.F.);+#4585=ADVANCED_FACE('',(#4586),#4605,.F.);+#4586=FACE_BOUND('',#4587,.F.);+#4587=EDGE_LOOP('',(#4588,#4591,#4596,#4601,#4603,#4604));+#4588=ORIENTED_EDGE('',*,*,#4589,.F.);+#4589=EDGE_CURVE('',#4590,#4577,#4581,.T.);+#4590=VERTEX_POINT('',#4582);+#4591=ORIENTED_EDGE('',*,*,#4592,.T.);+#4592=EDGE_CURVE('',#4590,#4593,#4595,.T.);+#4593=VERTEX_POINT('',#4594);+#4594=CARTESIAN_POINT('',(-7.2,4.22,0.85));+#4595=LINE('',#4582,#1097);+#4596=ORIENTED_EDGE('',*,*,#4597,.T.);+#4597=EDGE_CURVE('',#4593,#4598,#4600,.T.);+#4598=VERTEX_POINT('',#4599);+#4599=CARTESIAN_POINT('',(-7.,4.22,0.85));+#4600=LINE('',#4594,#277);+#4601=ORIENTED_EDGE('',*,*,#4602,.T.);+#4602=EDGE_CURVE('',#4598,#1215,#4600,.T.);+#4603=ORIENTED_EDGE('',*,*,#1214,.F.);+#4604=ORIENTED_EDGE('',*,*,#4580,.F.);+#4605=PLANE('',#4606);+#4606=AXIS2_PLACEMENT_3D('',#4582,#312,#278);+#4607=ADVANCED_FACE('',(#4608),#283,.F.);+#4608=FACE_BOUND('',#4609,.F.);+#4609=EDGE_LOOP('',(#4610,#4614,#4618,#4619));+#4610=ORIENTED_EDGE('',*,*,#4611,.T.);+#4611=EDGE_CURVE('',#4598,#4612,#281,.T.);+#4612=VERTEX_POINT('',#4613);+#4613=CARTESIAN_POINT('',(-7.,4.78,0.85));+#4614=ORIENTED_EDGE('',*,*,#4615,.T.);+#4615=EDGE_CURVE('',#4612,#1219,#4616,.T.);+#4616=LINE('',#4617,#277);+#4617=CARTESIAN_POINT('',(-7.2,4.78,0.85));+#4618=ORIENTED_EDGE('',*,*,#1218,.F.);+#4619=ORIENTED_EDGE('',*,*,#4602,.F.);+#4620=ADVANCED_FACE('',(#4621),#4635,.F.);+#4621=FACE_BOUND('',#4622,.F.);+#4622=EDGE_LOOP('',(#4623,#4626,#4630,#4632,#4633,#4634));+#4623=ORIENTED_EDGE('',*,*,#4624,.F.);+#4624=EDGE_CURVE('',#4625,#4612,#4616,.T.);+#4625=VERTEX_POINT('',#4617);+#4626=ORIENTED_EDGE('',*,*,#4627,.T.);+#4627=EDGE_CURVE('',#4625,#4628,#4629,.T.);+#4628=VERTEX_POINT('',#4187);+#4629=LINE('',#4617,#1097);+#4630=ORIENTED_EDGE('',*,*,#4631,.T.);+#4631=EDGE_CURVE('',#4628,#4180,#4186,.T.);+#4632=ORIENTED_EDGE('',*,*,#4185,.T.);+#4633=ORIENTED_EDGE('',*,*,#1222,.F.);+#4634=ORIENTED_EDGE('',*,*,#4615,.F.);+#4635=PLANE('',#4636);+#4636=AXIS2_PLACEMENT_3D('',#4617,#312,#278);+#4637=ADVANCED_FACE('',(#4638),#4646,.F.);+#4638=FACE_BOUND('',#4639,.F.);+#4639=EDGE_LOOP('',(#4640,#3838,#4641,#4645));+#4640=ORIENTED_EDGE('',*,*,#1125,.T.);+#4641=ORIENTED_EDGE('',*,*,#4642,.F.);+#4642=EDGE_CURVE('',#4213,#3819,#4643,.T.);+#4643=B_SPLINE_CURVE_WITH_KNOTS('',1,(#4214,#4644),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4644=CARTESIAN_POINT('',(-6.718419117457,-6.786838234914,1.5));+#4645=ORIENTED_EDGE('',*,*,#4212,.T.);+#4646=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#4214,#4644),(#268,#1128)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4647=ADVANCED_FACE('',(#4648),#4699,.F.);+#4648=FACE_BOUND('',#4649,.F.);+#4649=EDGE_LOOP('',(#4650,#4655,#4658,#4659,#4661,#4662,#4664,#4665,#4667,#4668,#4670,#4671,#4673,#4674,#4676,#4677,#4679,#4680,#4682,#4683,#4685,#4686,#4688,#4689,#4691,#4692,#4694,#4695,#4697,#4698));+#4650=ORIENTED_EDGE('',*,*,#4651,.T.);+#4651=EDGE_CURVE('',#3908,#4652,#4654,.T.);+#4652=VERTEX_POINT('',#4653);+#4653=CARTESIAN_POINT('',(6.755919117457,6.861838234914,0.1));+#4654=LINE('',#3909,#49);+#4655=ORIENTED_EDGE('',*,*,#4656,.T.);+#4656=EDGE_CURVE('',#4652,#3269,#4657,.T.);+#4657=B_SPLINE_CURVE_WITH_KNOTS('',1,(#4653,#3270),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4658=ORIENTED_EDGE('',*,*,#3284,.F.);+#4659=ORIENTED_EDGE('',*,*,#4660,.F.);+#4660=EDGE_CURVE('',#3075,#3150,#1238,.T.);+#4661=ORIENTED_EDGE('',*,*,#3074,.F.);+#4662=ORIENTED_EDGE('',*,*,#4663,.F.);+#4663=EDGE_CURVE('',#2923,#2998,#1238,.T.);+#4664=ORIENTED_EDGE('',*,*,#2922,.F.);+#4665=ORIENTED_EDGE('',*,*,#4666,.F.);+#4666=EDGE_CURVE('',#2771,#2846,#1238,.T.);+#4667=ORIENTED_EDGE('',*,*,#2770,.F.);+#4668=ORIENTED_EDGE('',*,*,#4669,.F.);+#4669=EDGE_CURVE('',#2619,#2694,#1238,.T.);+#4670=ORIENTED_EDGE('',*,*,#2618,.F.);+#4671=ORIENTED_EDGE('',*,*,#4672,.F.);+#4672=EDGE_CURVE('',#2467,#2542,#1238,.T.);+#4673=ORIENTED_EDGE('',*,*,#2466,.F.);+#4674=ORIENTED_EDGE('',*,*,#4675,.F.);+#4675=EDGE_CURVE('',#2315,#2390,#1238,.T.);+#4676=ORIENTED_EDGE('',*,*,#2314,.F.);+#4677=ORIENTED_EDGE('',*,*,#4678,.F.);+#4678=EDGE_CURVE('',#2163,#2238,#1238,.T.);+#4679=ORIENTED_EDGE('',*,*,#2162,.F.);+#4680=ORIENTED_EDGE('',*,*,#4681,.F.);+#4681=EDGE_CURVE('',#2011,#2086,#1238,.T.);+#4682=ORIENTED_EDGE('',*,*,#2010,.F.);+#4683=ORIENTED_EDGE('',*,*,#4684,.F.);+#4684=EDGE_CURVE('',#1859,#1934,#1238,.T.);+#4685=ORIENTED_EDGE('',*,*,#1858,.F.);+#4686=ORIENTED_EDGE('',*,*,#4687,.F.);+#4687=EDGE_CURVE('',#1707,#1782,#1238,.T.);+#4688=ORIENTED_EDGE('',*,*,#1706,.F.);+#4689=ORIENTED_EDGE('',*,*,#4690,.F.);+#4690=EDGE_CURVE('',#1555,#1630,#1238,.T.);+#4691=ORIENTED_EDGE('',*,*,#1554,.F.);+#4692=ORIENTED_EDGE('',*,*,#4693,.F.);+#4693=EDGE_CURVE('',#1403,#1478,#1238,.T.);+#4694=ORIENTED_EDGE('',*,*,#1402,.F.);+#4695=ORIENTED_EDGE('',*,*,#4696,.F.);+#4696=EDGE_CURVE('',#1236,#1326,#1238,.T.);+#4697=ORIENTED_EDGE('',*,*,#1235,.F.);+#4698=ORIENTED_EDGE('',*,*,#3912,.F.);+#4699=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#3909,#1054),(#4653,#3270)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4700=ADVANCED_FACE('',(#4701),#4708,.F.);+#4701=FACE_BOUND('',#4702,.F.);+#4702=EDGE_LOOP('',(#4703,#1376,#4706,#4707));+#4703=ORIENTED_EDGE('',*,*,#4704,.T.);+#4704=EDGE_CURVE('',#1299,#1372,#4705,.T.);+#4705=LINE('',#1300,#299);+#4706=ORIENTED_EDGE('',*,*,#1392,.F.);+#4707=ORIENTED_EDGE('',*,*,#1306,.F.);+#4708=PLANE('',#4709);+#4709=AXIS2_PLACEMENT_3D('',#1300,#4710,#1311);+#4710=DIRECTION('',(0.,-0.986322983713,-0.16482406317));+#4711=ADVANCED_FACE('',(#4712),#4719,.F.);+#4712=FACE_BOUND('',#4713,.F.);+#4713=EDGE_LOOP('',(#4714,#1370,#4717,#4718));+#4714=ORIENTED_EDGE('',*,*,#4715,.T.);+#4715=EDGE_CURVE('',#1294,#1367,#4716,.T.);+#4716=LINE('',#1295,#299);+#4717=ORIENTED_EDGE('',*,*,#4704,.F.);+#4718=ORIENTED_EDGE('',*,*,#1298,.F.);+#4719=CYLINDRICAL_SURFACE('',#4720,1.E-01);+#4720=AXIS2_PLACEMENT_3D('',#1280,#1265,#1304);+#4721=ADVANCED_FACE('',(#4722),#4729,.F.);+#4722=FACE_BOUND('',#4723,.F.);+#4723=EDGE_LOOP('',(#4724,#1365,#4727,#4728));+#4724=ORIENTED_EDGE('',*,*,#4725,.T.);+#4725=EDGE_CURVE('',#1289,#1362,#4726,.T.);+#4726=LINE('',#1290,#299);+#4727=ORIENTED_EDGE('',*,*,#4715,.F.);+#4728=ORIENTED_EDGE('',*,*,#1293,.F.);+#4729=PLANE('',#4730);+#4730=AXIS2_PLACEMENT_3D('',#1290,#312,#256);+#4731=ADVANCED_FACE('',(#4732),#4739,.F.);+#4732=FACE_BOUND('',#4733,.F.);+#4733=EDGE_LOOP('',(#4734,#1360,#4737,#4738));+#4734=ORIENTED_EDGE('',*,*,#4735,.T.);+#4735=EDGE_CURVE('',#1284,#1357,#4736,.T.);+#4736=LINE('',#1285,#299);+#4737=ORIENTED_EDGE('',*,*,#4725,.F.);+#4738=ORIENTED_EDGE('',*,*,#1288,.F.);+#4739=PLANE('',#4740);+#4740=AXIS2_PLACEMENT_3D('',#1285,#256,#13);+#4741=ADVANCED_FACE('',(#4742),#4749,.F.);+#4742=FACE_BOUND('',#4743,.F.);+#4743=EDGE_LOOP('',(#4744,#1355,#4747,#4748));+#4744=ORIENTED_EDGE('',*,*,#4745,.T.);+#4745=EDGE_CURVE('',#1276,#1350,#4746,.T.);+#4746=LINE('',#1277,#299);+#4747=ORIENTED_EDGE('',*,*,#4735,.F.);+#4748=ORIENTED_EDGE('',*,*,#1283,.F.);+#4749=PLANE('',#4750);+#4750=AXIS2_PLACEMENT_3D('',#1277,#13,#1257);+#4751=ADVANCED_FACE('',(#4752),#4759,.T.);+#4752=FACE_BOUND('',#4753,.F.);+#4753=EDGE_LOOP('',(#4754,#1348,#4757,#4758));+#4754=ORIENTED_EDGE('',*,*,#4755,.T.);+#4755=EDGE_CURVE('',#1269,#1345,#4756,.T.);+#4756=LINE('',#1270,#299);+#4757=ORIENTED_EDGE('',*,*,#4745,.F.);+#4758=ORIENTED_EDGE('',*,*,#1275,.F.);+#4759=CYLINDRICAL_SURFACE('',#4760,0.2);+#4760=AXIS2_PLACEMENT_3D('',#1280,#1265,#1281);+#4761=ADVANCED_FACE('',(#4762),#4769,.F.);+#4762=FACE_BOUND('',#4763,.F.);+#4763=EDGE_LOOP('',(#4764,#1343,#4767,#4768));+#4764=ORIENTED_EDGE('',*,*,#4765,.T.);+#4765=EDGE_CURVE('',#1260,#1338,#4766,.T.);+#4766=LINE('',#1261,#299);+#4767=ORIENTED_EDGE('',*,*,#4755,.F.);+#4768=ORIENTED_EDGE('',*,*,#1268,.F.);+#4769=PLANE('',#4770);+#4770=AXIS2_PLACEMENT_3D('',#1261,#4771,#1273);+#4771=DIRECTION('',(0.,0.986322983713,0.16482406317));+#4772=ADVANCED_FACE('',(#4773),#4780,.F.);+#4773=FACE_BOUND('',#4774,.F.);+#4774=EDGE_LOOP('',(#4775,#1336,#4778,#4779));+#4775=ORIENTED_EDGE('',*,*,#4776,.T.);+#4776=EDGE_CURVE('',#1252,#1332,#4777,.T.);+#4777=LINE('',#1253,#299);+#4778=ORIENTED_EDGE('',*,*,#4765,.F.);+#4779=ORIENTED_EDGE('',*,*,#1259,.F.);+#4780=CYLINDRICAL_SURFACE('',#1263,0.1);+#4781=ADVANCED_FACE('',(#4782),#4787,.F.);+#4782=FACE_BOUND('',#4783,.F.);+#4783=EDGE_LOOP('',(#4784,#4785,#1330,#4786));+#4784=ORIENTED_EDGE('',*,*,#1251,.F.);+#4785=ORIENTED_EDGE('',*,*,#4696,.T.);+#4786=ORIENTED_EDGE('',*,*,#4776,.F.);+#4787=PLANE('',#4788);+#4788=AXIS2_PLACEMENT_3D('',#1255,#13,#1257);+#4789=ADVANCED_FACE('',(#4790),#4797,.F.);+#4790=FACE_BOUND('',#4791,.F.);+#4791=EDGE_LOOP('',(#4792,#1528,#4795,#4796));+#4792=ORIENTED_EDGE('',*,*,#4793,.T.);+#4793=EDGE_CURVE('',#1456,#1524,#4794,.T.);+#4794=LINE('',#1457,#299);+#4795=ORIENTED_EDGE('',*,*,#1544,.F.);+#4796=ORIENTED_EDGE('',*,*,#1461,.F.);+#4797=PLANE('',#4798);+#4798=AXIS2_PLACEMENT_3D('',#1457,#4710,#1311);+#4799=ADVANCED_FACE('',(#4800),#4807,.F.);+#4800=FACE_BOUND('',#4801,.F.);+#4801=EDGE_LOOP('',(#4802,#1522,#4805,#4806));+#4802=ORIENTED_EDGE('',*,*,#4803,.T.);+#4803=EDGE_CURVE('',#1451,#1519,#4804,.T.);+#4804=LINE('',#1452,#299);+#4805=ORIENTED_EDGE('',*,*,#4793,.F.);+#4806=ORIENTED_EDGE('',*,*,#1455,.F.);+#4807=CYLINDRICAL_SURFACE('',#4808,1.E-01);+#4808=AXIS2_PLACEMENT_3D('',#1438,#1265,#1304);+#4809=ADVANCED_FACE('',(#4810),#4817,.F.);+#4810=FACE_BOUND('',#4811,.F.);+#4811=EDGE_LOOP('',(#4812,#1517,#4815,#4816));+#4812=ORIENTED_EDGE('',*,*,#4813,.T.);+#4813=EDGE_CURVE('',#1446,#1514,#4814,.T.);+#4814=LINE('',#1447,#299);+#4815=ORIENTED_EDGE('',*,*,#4803,.F.);+#4816=ORIENTED_EDGE('',*,*,#1450,.F.);+#4817=PLANE('',#4818);+#4818=AXIS2_PLACEMENT_3D('',#1447,#312,#256);+#4819=ADVANCED_FACE('',(#4820),#4827,.F.);+#4820=FACE_BOUND('',#4821,.F.);+#4821=EDGE_LOOP('',(#4822,#1512,#4825,#4826));+#4822=ORIENTED_EDGE('',*,*,#4823,.T.);+#4823=EDGE_CURVE('',#1441,#1509,#4824,.T.);+#4824=LINE('',#1442,#299);+#4825=ORIENTED_EDGE('',*,*,#4813,.F.);+#4826=ORIENTED_EDGE('',*,*,#1445,.F.);+#4827=PLANE('',#4828);+#4828=AXIS2_PLACEMENT_3D('',#1442,#256,#13);+#4829=ADVANCED_FACE('',(#4830),#4837,.F.);+#4830=FACE_BOUND('',#4831,.F.);+#4831=EDGE_LOOP('',(#4832,#1507,#4835,#4836));+#4832=ORIENTED_EDGE('',*,*,#4833,.T.);+#4833=EDGE_CURVE('',#1434,#1502,#4834,.T.);+#4834=LINE('',#1435,#299);+#4835=ORIENTED_EDGE('',*,*,#4823,.F.);+#4836=ORIENTED_EDGE('',*,*,#1440,.F.);+#4837=PLANE('',#4838);+#4838=AXIS2_PLACEMENT_3D('',#1435,#13,#1257);+#4839=ADVANCED_FACE('',(#4840),#4847,.T.);+#4840=FACE_BOUND('',#4841,.F.);+#4841=EDGE_LOOP('',(#4842,#1500,#4845,#4846));+#4842=ORIENTED_EDGE('',*,*,#4843,.T.);+#4843=EDGE_CURVE('',#1429,#1497,#4844,.T.);+#4844=LINE('',#1430,#299);+#4845=ORIENTED_EDGE('',*,*,#4833,.F.);+#4846=ORIENTED_EDGE('',*,*,#1433,.F.);+#4847=CYLINDRICAL_SURFACE('',#4848,0.2);+#4848=AXIS2_PLACEMENT_3D('',#1438,#1265,#1281);+#4849=ADVANCED_FACE('',(#4850),#4857,.F.);+#4850=FACE_BOUND('',#4851,.F.);+#4851=EDGE_LOOP('',(#4852,#1495,#4855,#4856));+#4852=ORIENTED_EDGE('',*,*,#4853,.T.);+#4853=EDGE_CURVE('',#1422,#1490,#4854,.T.);+#4854=LINE('',#1423,#299);+#4855=ORIENTED_EDGE('',*,*,#4843,.F.);+#4856=ORIENTED_EDGE('',*,*,#1428,.F.);+#4857=PLANE('',#4858);+#4858=AXIS2_PLACEMENT_3D('',#1423,#4771,#1273);+#4859=ADVANCED_FACE('',(#4860),#4867,.F.);+#4860=FACE_BOUND('',#4861,.F.);+#4861=EDGE_LOOP('',(#4862,#1488,#4865,#4866));+#4862=ORIENTED_EDGE('',*,*,#4863,.T.);+#4863=EDGE_CURVE('',#1416,#1484,#4864,.T.);+#4864=LINE('',#1417,#299);+#4865=ORIENTED_EDGE('',*,*,#4853,.F.);+#4866=ORIENTED_EDGE('',*,*,#1421,.F.);+#4867=CYLINDRICAL_SURFACE('',#1425,0.1);+#4868=ADVANCED_FACE('',(#4869),#4874,.F.);+#4869=FACE_BOUND('',#4870,.F.);+#4870=EDGE_LOOP('',(#4871,#4872,#1482,#4873));+#4871=ORIENTED_EDGE('',*,*,#1415,.F.);+#4872=ORIENTED_EDGE('',*,*,#4693,.T.);+#4873=ORIENTED_EDGE('',*,*,#4863,.F.);+#4874=PLANE('',#4875);+#4875=AXIS2_PLACEMENT_3D('',#1419,#13,#1257);+#4876=ADVANCED_FACE('',(#4877),#4884,.F.);+#4877=FACE_BOUND('',#4878,.F.);+#4878=EDGE_LOOP('',(#4879,#1680,#4882,#4883));+#4879=ORIENTED_EDGE('',*,*,#4880,.T.);+#4880=EDGE_CURVE('',#1608,#1676,#4881,.T.);+#4881=LINE('',#1609,#299);+#4882=ORIENTED_EDGE('',*,*,#1696,.F.);+#4883=ORIENTED_EDGE('',*,*,#1613,.F.);+#4884=PLANE('',#4885);+#4885=AXIS2_PLACEMENT_3D('',#1609,#4710,#1311);+#4886=ADVANCED_FACE('',(#4887),#4894,.F.);+#4887=FACE_BOUND('',#4888,.F.);+#4888=EDGE_LOOP('',(#4889,#1674,#4892,#4893));+#4889=ORIENTED_EDGE('',*,*,#4890,.T.);+#4890=EDGE_CURVE('',#1603,#1671,#4891,.T.);+#4891=LINE('',#1604,#299);+#4892=ORIENTED_EDGE('',*,*,#4880,.F.);+#4893=ORIENTED_EDGE('',*,*,#1607,.F.);+#4894=CYLINDRICAL_SURFACE('',#4895,1.E-01);+#4895=AXIS2_PLACEMENT_3D('',#1590,#1265,#1304);+#4896=ADVANCED_FACE('',(#4897),#4904,.F.);+#4897=FACE_BOUND('',#4898,.F.);+#4898=EDGE_LOOP('',(#4899,#1669,#4902,#4903));+#4899=ORIENTED_EDGE('',*,*,#4900,.T.);+#4900=EDGE_CURVE('',#1598,#1666,#4901,.T.);+#4901=LINE('',#1599,#299);+#4902=ORIENTED_EDGE('',*,*,#4890,.F.);+#4903=ORIENTED_EDGE('',*,*,#1602,.F.);+#4904=PLANE('',#4905);+#4905=AXIS2_PLACEMENT_3D('',#1599,#312,#256);+#4906=ADVANCED_FACE('',(#4907),#4914,.F.);+#4907=FACE_BOUND('',#4908,.F.);+#4908=EDGE_LOOP('',(#4909,#1664,#4912,#4913));+#4909=ORIENTED_EDGE('',*,*,#4910,.T.);+#4910=EDGE_CURVE('',#1593,#1661,#4911,.T.);+#4911=LINE('',#1594,#299);+#4912=ORIENTED_EDGE('',*,*,#4900,.F.);+#4913=ORIENTED_EDGE('',*,*,#1597,.F.);+#4914=PLANE('',#4915);+#4915=AXIS2_PLACEMENT_3D('',#1594,#256,#13);+#4916=ADVANCED_FACE('',(#4917),#4924,.F.);+#4917=FACE_BOUND('',#4918,.F.);+#4918=EDGE_LOOP('',(#4919,#1659,#4922,#4923));+#4919=ORIENTED_EDGE('',*,*,#4920,.T.);+#4920=EDGE_CURVE('',#1586,#1654,#4921,.T.);+#4921=LINE('',#1587,#299);+#4922=ORIENTED_EDGE('',*,*,#4910,.F.);+#4923=ORIENTED_EDGE('',*,*,#1592,.F.);+#4924=PLANE('',#4925);+#4925=AXIS2_PLACEMENT_3D('',#1587,#13,#1257);+#4926=ADVANCED_FACE('',(#4927),#4934,.T.);+#4927=FACE_BOUND('',#4928,.F.);+#4928=EDGE_LOOP('',(#4929,#1652,#4932,#4933));+#4929=ORIENTED_EDGE('',*,*,#4930,.T.);+#4930=EDGE_CURVE('',#1581,#1649,#4931,.T.);+#4931=LINE('',#1582,#299);+#4932=ORIENTED_EDGE('',*,*,#4920,.F.);+#4933=ORIENTED_EDGE('',*,*,#1585,.F.);+#4934=CYLINDRICAL_SURFACE('',#4935,0.2);+#4935=AXIS2_PLACEMENT_3D('',#1590,#1265,#1281);+#4936=ADVANCED_FACE('',(#4937),#4944,.F.);+#4937=FACE_BOUND('',#4938,.F.);+#4938=EDGE_LOOP('',(#4939,#1647,#4942,#4943));+#4939=ORIENTED_EDGE('',*,*,#4940,.T.);+#4940=EDGE_CURVE('',#1574,#1642,#4941,.T.);+#4941=LINE('',#1575,#299);+#4942=ORIENTED_EDGE('',*,*,#4930,.F.);+#4943=ORIENTED_EDGE('',*,*,#1580,.F.);+#4944=PLANE('',#4945);+#4945=AXIS2_PLACEMENT_3D('',#1575,#4771,#1273);+#4946=ADVANCED_FACE('',(#4947),#4954,.F.);+#4947=FACE_BOUND('',#4948,.F.);+#4948=EDGE_LOOP('',(#4949,#1640,#4952,#4953));+#4949=ORIENTED_EDGE('',*,*,#4950,.T.);+#4950=EDGE_CURVE('',#1568,#1636,#4951,.T.);+#4951=LINE('',#1569,#299);+#4952=ORIENTED_EDGE('',*,*,#4940,.F.);+#4953=ORIENTED_EDGE('',*,*,#1573,.F.);+#4954=CYLINDRICAL_SURFACE('',#1577,0.1);+#4955=ADVANCED_FACE('',(#4956),#4961,.F.);+#4956=FACE_BOUND('',#4957,.F.);+#4957=EDGE_LOOP('',(#4958,#4959,#1634,#4960));+#4958=ORIENTED_EDGE('',*,*,#1567,.F.);+#4959=ORIENTED_EDGE('',*,*,#4690,.T.);+#4960=ORIENTED_EDGE('',*,*,#4950,.F.);+#4961=PLANE('',#4962);+#4962=AXIS2_PLACEMENT_3D('',#1571,#13,#1257);+#4963=ADVANCED_FACE('',(#4964),#4971,.F.);+#4964=FACE_BOUND('',#4965,.F.);+#4965=EDGE_LOOP('',(#4966,#1832,#4969,#4970));+#4966=ORIENTED_EDGE('',*,*,#4967,.T.);+#4967=EDGE_CURVE('',#1760,#1828,#4968,.T.);+#4968=LINE('',#1761,#299);+#4969=ORIENTED_EDGE('',*,*,#1848,.F.);+#4970=ORIENTED_EDGE('',*,*,#1765,.F.);+#4971=PLANE('',#4972);+#4972=AXIS2_PLACEMENT_3D('',#1761,#4710,#1311);+#4973=ADVANCED_FACE('',(#4974),#4981,.F.);+#4974=FACE_BOUND('',#4975,.F.);+#4975=EDGE_LOOP('',(#4976,#1826,#4979,#4980));+#4976=ORIENTED_EDGE('',*,*,#4977,.T.);+#4977=EDGE_CURVE('',#1755,#1823,#4978,.T.);+#4978=LINE('',#1756,#299);+#4979=ORIENTED_EDGE('',*,*,#4967,.F.);+#4980=ORIENTED_EDGE('',*,*,#1759,.F.);+#4981=CYLINDRICAL_SURFACE('',#4982,1.E-01);+#4982=AXIS2_PLACEMENT_3D('',#1742,#1265,#1304);+#4983=ADVANCED_FACE('',(#4984),#4991,.F.);+#4984=FACE_BOUND('',#4985,.F.);+#4985=EDGE_LOOP('',(#4986,#1821,#4989,#4990));+#4986=ORIENTED_EDGE('',*,*,#4987,.T.);+#4987=EDGE_CURVE('',#1750,#1818,#4988,.T.);+#4988=LINE('',#1751,#299);+#4989=ORIENTED_EDGE('',*,*,#4977,.F.);+#4990=ORIENTED_EDGE('',*,*,#1754,.F.);+#4991=PLANE('',#4992);+#4992=AXIS2_PLACEMENT_3D('',#1751,#312,#256);+#4993=ADVANCED_FACE('',(#4994),#5001,.F.);+#4994=FACE_BOUND('',#4995,.F.);+#4995=EDGE_LOOP('',(#4996,#1816,#4999,#5000));+#4996=ORIENTED_EDGE('',*,*,#4997,.T.);+#4997=EDGE_CURVE('',#1745,#1813,#4998,.T.);+#4998=LINE('',#1746,#299);+#4999=ORIENTED_EDGE('',*,*,#4987,.F.);+#5000=ORIENTED_EDGE('',*,*,#1749,.F.);+#5001=PLANE('',#5002);+#5002=AXIS2_PLACEMENT_3D('',#1746,#256,#13);+#5003=ADVANCED_FACE('',(#5004),#5011,.F.);+#5004=FACE_BOUND('',#5005,.F.);+#5005=EDGE_LOOP('',(#5006,#1811,#5009,#5010));+#5006=ORIENTED_EDGE('',*,*,#5007,.T.);+#5007=EDGE_CURVE('',#1738,#1806,#5008,.T.);+#5008=LINE('',#1739,#299);+#5009=ORIENTED_EDGE('',*,*,#4997,.F.);+#5010=ORIENTED_EDGE('',*,*,#1744,.F.);+#5011=PLANE('',#5012);+#5012=AXIS2_PLACEMENT_3D('',#1739,#13,#1257);+#5013=ADVANCED_FACE('',(#5014),#5021,.T.);+#5014=FACE_BOUND('',#5015,.F.);+#5015=EDGE_LOOP('',(#5016,#1804,#5019,#5020));+#5016=ORIENTED_EDGE('',*,*,#5017,.T.);+#5017=EDGE_CURVE('',#1733,#1801,#5018,.T.);+#5018=LINE('',#1734,#299);+#5019=ORIENTED_EDGE('',*,*,#5007,.F.);+#5020=ORIENTED_EDGE('',*,*,#1737,.F.);+#5021=CYLINDRICAL_SURFACE('',#5022,0.2);+#5022=AXIS2_PLACEMENT_3D('',#1742,#1265,#1281);+#5023=ADVANCED_FACE('',(#5024),#5031,.F.);+#5024=FACE_BOUND('',#5025,.F.);+#5025=EDGE_LOOP('',(#5026,#1799,#5029,#5030));+#5026=ORIENTED_EDGE('',*,*,#5027,.T.);+#5027=EDGE_CURVE('',#1726,#1794,#5028,.T.);+#5028=LINE('',#1727,#299);+#5029=ORIENTED_EDGE('',*,*,#5017,.F.);+#5030=ORIENTED_EDGE('',*,*,#1732,.F.);+#5031=PLANE('',#5032);+#5032=AXIS2_PLACEMENT_3D('',#1727,#4771,#1273);+#5033=ADVANCED_FACE('',(#5034),#5041,.F.);+#5034=FACE_BOUND('',#5035,.F.);+#5035=EDGE_LOOP('',(#5036,#1792,#5039,#5040));+#5036=ORIENTED_EDGE('',*,*,#5037,.T.);+#5037=EDGE_CURVE('',#1720,#1788,#5038,.T.);+#5038=LINE('',#1721,#299);+#5039=ORIENTED_EDGE('',*,*,#5027,.F.);+#5040=ORIENTED_EDGE('',*,*,#1725,.F.);+#5041=CYLINDRICAL_SURFACE('',#1729,0.1);+#5042=ADVANCED_FACE('',(#5043),#5048,.F.);+#5043=FACE_BOUND('',#5044,.F.);+#5044=EDGE_LOOP('',(#5045,#5046,#1786,#5047));+#5045=ORIENTED_EDGE('',*,*,#1719,.F.);+#5046=ORIENTED_EDGE('',*,*,#4687,.T.);+#5047=ORIENTED_EDGE('',*,*,#5037,.F.);+#5048=PLANE('',#5049);+#5049=AXIS2_PLACEMENT_3D('',#1723,#13,#1257);+#5050=ADVANCED_FACE('',(#5051),#5058,.F.);+#5051=FACE_BOUND('',#5052,.F.);+#5052=EDGE_LOOP('',(#5053,#1984,#5056,#5057));+#5053=ORIENTED_EDGE('',*,*,#5054,.T.);+#5054=EDGE_CURVE('',#1912,#1980,#5055,.T.);+#5055=LINE('',#1913,#299);+#5056=ORIENTED_EDGE('',*,*,#2000,.F.);+#5057=ORIENTED_EDGE('',*,*,#1917,.F.);+#5058=PLANE('',#5059);+#5059=AXIS2_PLACEMENT_3D('',#1913,#4710,#1311);+#5060=ADVANCED_FACE('',(#5061),#5068,.F.);+#5061=FACE_BOUND('',#5062,.F.);+#5062=EDGE_LOOP('',(#5063,#1978,#5066,#5067));+#5063=ORIENTED_EDGE('',*,*,#5064,.T.);+#5064=EDGE_CURVE('',#1907,#1975,#5065,.T.);+#5065=LINE('',#1908,#299);+#5066=ORIENTED_EDGE('',*,*,#5054,.F.);+#5067=ORIENTED_EDGE('',*,*,#1911,.F.);+#5068=CYLINDRICAL_SURFACE('',#5069,1.E-01);+#5069=AXIS2_PLACEMENT_3D('',#1894,#1265,#1304);+#5070=ADVANCED_FACE('',(#5071),#5078,.F.);+#5071=FACE_BOUND('',#5072,.F.);+#5072=EDGE_LOOP('',(#5073,#1973,#5076,#5077));+#5073=ORIENTED_EDGE('',*,*,#5074,.T.);+#5074=EDGE_CURVE('',#1902,#1970,#5075,.T.);+#5075=LINE('',#1903,#299);+#5076=ORIENTED_EDGE('',*,*,#5064,.F.);+#5077=ORIENTED_EDGE('',*,*,#1906,.F.);+#5078=PLANE('',#5079);+#5079=AXIS2_PLACEMENT_3D('',#1903,#312,#256);+#5080=ADVANCED_FACE('',(#5081),#5088,.F.);+#5081=FACE_BOUND('',#5082,.F.);+#5082=EDGE_LOOP('',(#5083,#1968,#5086,#5087));+#5083=ORIENTED_EDGE('',*,*,#5084,.T.);+#5084=EDGE_CURVE('',#1897,#1965,#5085,.T.);+#5085=LINE('',#1898,#299);+#5086=ORIENTED_EDGE('',*,*,#5074,.F.);+#5087=ORIENTED_EDGE('',*,*,#1901,.F.);+#5088=PLANE('',#5089);+#5089=AXIS2_PLACEMENT_3D('',#1898,#256,#13);+#5090=ADVANCED_FACE('',(#5091),#5098,.F.);+#5091=FACE_BOUND('',#5092,.F.);+#5092=EDGE_LOOP('',(#5093,#1963,#5096,#5097));+#5093=ORIENTED_EDGE('',*,*,#5094,.T.);+#5094=EDGE_CURVE('',#1890,#1958,#5095,.T.);+#5095=LINE('',#1891,#299);+#5096=ORIENTED_EDGE('',*,*,#5084,.F.);+#5097=ORIENTED_EDGE('',*,*,#1896,.F.);+#5098=PLANE('',#5099);+#5099=AXIS2_PLACEMENT_3D('',#1891,#13,#1257);+#5100=ADVANCED_FACE('',(#5101),#5108,.T.);+#5101=FACE_BOUND('',#5102,.F.);+#5102=EDGE_LOOP('',(#5103,#1956,#5106,#5107));+#5103=ORIENTED_EDGE('',*,*,#5104,.T.);+#5104=EDGE_CURVE('',#1885,#1953,#5105,.T.);+#5105=LINE('',#1886,#299);+#5106=ORIENTED_EDGE('',*,*,#5094,.F.);+#5107=ORIENTED_EDGE('',*,*,#1889,.F.);+#5108=CYLINDRICAL_SURFACE('',#5109,0.2);+#5109=AXIS2_PLACEMENT_3D('',#1894,#1265,#1281);+#5110=ADVANCED_FACE('',(#5111),#5118,.F.);+#5111=FACE_BOUND('',#5112,.F.);+#5112=EDGE_LOOP('',(#5113,#1951,#5116,#5117));+#5113=ORIENTED_EDGE('',*,*,#5114,.T.);+#5114=EDGE_CURVE('',#1878,#1946,#5115,.T.);+#5115=LINE('',#1879,#299);+#5116=ORIENTED_EDGE('',*,*,#5104,.F.);+#5117=ORIENTED_EDGE('',*,*,#1884,.F.);+#5118=PLANE('',#5119);+#5119=AXIS2_PLACEMENT_3D('',#1879,#4771,#1273);+#5120=ADVANCED_FACE('',(#5121),#5128,.F.);+#5121=FACE_BOUND('',#5122,.F.);+#5122=EDGE_LOOP('',(#5123,#1944,#5126,#5127));+#5123=ORIENTED_EDGE('',*,*,#5124,.T.);+#5124=EDGE_CURVE('',#1872,#1940,#5125,.T.);+#5125=LINE('',#1873,#299);+#5126=ORIENTED_EDGE('',*,*,#5114,.F.);+#5127=ORIENTED_EDGE('',*,*,#1877,.F.);+#5128=CYLINDRICAL_SURFACE('',#1881,0.1);+#5129=ADVANCED_FACE('',(#5130),#5135,.F.);+#5130=FACE_BOUND('',#5131,.F.);+#5131=EDGE_LOOP('',(#5132,#5133,#1938,#5134));+#5132=ORIENTED_EDGE('',*,*,#1871,.F.);+#5133=ORIENTED_EDGE('',*,*,#4684,.T.);+#5134=ORIENTED_EDGE('',*,*,#5124,.F.);+#5135=PLANE('',#5136);+#5136=AXIS2_PLACEMENT_3D('',#1875,#13,#1257);+#5137=ADVANCED_FACE('',(#5138),#5145,.F.);+#5138=FACE_BOUND('',#5139,.F.);+#5139=EDGE_LOOP('',(#5140,#2136,#5143,#5144));+#5140=ORIENTED_EDGE('',*,*,#5141,.T.);+#5141=EDGE_CURVE('',#2064,#2132,#5142,.T.);+#5142=LINE('',#2065,#299);+#5143=ORIENTED_EDGE('',*,*,#2152,.F.);+#5144=ORIENTED_EDGE('',*,*,#2069,.F.);+#5145=PLANE('',#5146);+#5146=AXIS2_PLACEMENT_3D('',#2065,#4710,#1311);+#5147=ADVANCED_FACE('',(#5148),#5155,.F.);+#5148=FACE_BOUND('',#5149,.F.);+#5149=EDGE_LOOP('',(#5150,#2130,#5153,#5154));+#5150=ORIENTED_EDGE('',*,*,#5151,.T.);+#5151=EDGE_CURVE('',#2059,#2127,#5152,.T.);+#5152=LINE('',#2060,#299);+#5153=ORIENTED_EDGE('',*,*,#5141,.F.);+#5154=ORIENTED_EDGE('',*,*,#2063,.F.);+#5155=CYLINDRICAL_SURFACE('',#5156,1.E-01);+#5156=AXIS2_PLACEMENT_3D('',#2046,#1265,#1304);+#5157=ADVANCED_FACE('',(#5158),#5165,.F.);+#5158=FACE_BOUND('',#5159,.F.);+#5159=EDGE_LOOP('',(#5160,#2125,#5163,#5164));+#5160=ORIENTED_EDGE('',*,*,#5161,.T.);+#5161=EDGE_CURVE('',#2054,#2122,#5162,.T.);+#5162=LINE('',#2055,#299);+#5163=ORIENTED_EDGE('',*,*,#5151,.F.);+#5164=ORIENTED_EDGE('',*,*,#2058,.F.);+#5165=PLANE('',#5166);+#5166=AXIS2_PLACEMENT_3D('',#2055,#312,#256);+#5167=ADVANCED_FACE('',(#5168),#5175,.F.);+#5168=FACE_BOUND('',#5169,.F.);+#5169=EDGE_LOOP('',(#5170,#2120,#5173,#5174));+#5170=ORIENTED_EDGE('',*,*,#5171,.T.);+#5171=EDGE_CURVE('',#2049,#2117,#5172,.T.);+#5172=LINE('',#2050,#299);+#5173=ORIENTED_EDGE('',*,*,#5161,.F.);+#5174=ORIENTED_EDGE('',*,*,#2053,.F.);+#5175=PLANE('',#5176);+#5176=AXIS2_PLACEMENT_3D('',#2050,#256,#13);+#5177=ADVANCED_FACE('',(#5178),#5185,.F.);+#5178=FACE_BOUND('',#5179,.F.);+#5179=EDGE_LOOP('',(#5180,#2115,#5183,#5184));+#5180=ORIENTED_EDGE('',*,*,#5181,.T.);+#5181=EDGE_CURVE('',#2042,#2110,#5182,.T.);+#5182=LINE('',#2043,#299);+#5183=ORIENTED_EDGE('',*,*,#5171,.F.);+#5184=ORIENTED_EDGE('',*,*,#2048,.F.);+#5185=PLANE('',#5186);+#5186=AXIS2_PLACEMENT_3D('',#2043,#13,#1257);+#5187=ADVANCED_FACE('',(#5188),#5195,.T.);+#5188=FACE_BOUND('',#5189,.F.);+#5189=EDGE_LOOP('',(#5190,#2108,#5193,#5194));+#5190=ORIENTED_EDGE('',*,*,#5191,.T.);+#5191=EDGE_CURVE('',#2037,#2105,#5192,.T.);+#5192=LINE('',#2038,#299);+#5193=ORIENTED_EDGE('',*,*,#5181,.F.);+#5194=ORIENTED_EDGE('',*,*,#2041,.F.);+#5195=CYLINDRICAL_SURFACE('',#5196,0.2);+#5196=AXIS2_PLACEMENT_3D('',#2046,#1265,#1281);+#5197=ADVANCED_FACE('',(#5198),#5205,.F.);+#5198=FACE_BOUND('',#5199,.F.);+#5199=EDGE_LOOP('',(#5200,#2103,#5203,#5204));+#5200=ORIENTED_EDGE('',*,*,#5201,.T.);+#5201=EDGE_CURVE('',#2030,#2098,#5202,.T.);+#5202=LINE('',#2031,#299);+#5203=ORIENTED_EDGE('',*,*,#5191,.F.);+#5204=ORIENTED_EDGE('',*,*,#2036,.F.);+#5205=PLANE('',#5206);+#5206=AXIS2_PLACEMENT_3D('',#2031,#4771,#1273);+#5207=ADVANCED_FACE('',(#5208),#5215,.F.);+#5208=FACE_BOUND('',#5209,.F.);+#5209=EDGE_LOOP('',(#5210,#2096,#5213,#5214));+#5210=ORIENTED_EDGE('',*,*,#5211,.T.);+#5211=EDGE_CURVE('',#2024,#2092,#5212,.T.);+#5212=LINE('',#2025,#299);+#5213=ORIENTED_EDGE('',*,*,#5201,.F.);+#5214=ORIENTED_EDGE('',*,*,#2029,.F.);+#5215=CYLINDRICAL_SURFACE('',#2033,0.1);+#5216=ADVANCED_FACE('',(#5217),#5222,.F.);+#5217=FACE_BOUND('',#5218,.F.);+#5218=EDGE_LOOP('',(#5219,#5220,#2090,#5221));+#5219=ORIENTED_EDGE('',*,*,#2023,.F.);+#5220=ORIENTED_EDGE('',*,*,#4681,.T.);+#5221=ORIENTED_EDGE('',*,*,#5211,.F.);+#5222=PLANE('',#5223);+#5223=AXIS2_PLACEMENT_3D('',#2027,#13,#1257);+#5224=ADVANCED_FACE('',(#5225),#5232,.F.);+#5225=FACE_BOUND('',#5226,.F.);+#5226=EDGE_LOOP('',(#5227,#2288,#5230,#5231));+#5227=ORIENTED_EDGE('',*,*,#5228,.T.);+#5228=EDGE_CURVE('',#2216,#2284,#5229,.T.);+#5229=LINE('',#2217,#299);+#5230=ORIENTED_EDGE('',*,*,#2304,.F.);+#5231=ORIENTED_EDGE('',*,*,#2221,.F.);+#5232=PLANE('',#5233);+#5233=AXIS2_PLACEMENT_3D('',#2217,#4710,#1311);+#5234=ADVANCED_FACE('',(#5235),#5242,.F.);+#5235=FACE_BOUND('',#5236,.F.);+#5236=EDGE_LOOP('',(#5237,#2282,#5240,#5241));+#5237=ORIENTED_EDGE('',*,*,#5238,.T.);+#5238=EDGE_CURVE('',#2211,#2279,#5239,.T.);+#5239=LINE('',#2212,#299);+#5240=ORIENTED_EDGE('',*,*,#5228,.F.);+#5241=ORIENTED_EDGE('',*,*,#2215,.F.);+#5242=CYLINDRICAL_SURFACE('',#5243,1.E-01);+#5243=AXIS2_PLACEMENT_3D('',#2198,#1265,#1304);+#5244=ADVANCED_FACE('',(#5245),#5252,.F.);+#5245=FACE_BOUND('',#5246,.F.);+#5246=EDGE_LOOP('',(#5247,#2277,#5250,#5251));+#5247=ORIENTED_EDGE('',*,*,#5248,.T.);+#5248=EDGE_CURVE('',#2206,#2274,#5249,.T.);+#5249=LINE('',#2207,#299);+#5250=ORIENTED_EDGE('',*,*,#5238,.F.);+#5251=ORIENTED_EDGE('',*,*,#2210,.F.);+#5252=PLANE('',#5253);+#5253=AXIS2_PLACEMENT_3D('',#2207,#312,#256);+#5254=ADVANCED_FACE('',(#5255),#5262,.F.);+#5255=FACE_BOUND('',#5256,.F.);+#5256=EDGE_LOOP('',(#5257,#2272,#5260,#5261));+#5257=ORIENTED_EDGE('',*,*,#5258,.T.);+#5258=EDGE_CURVE('',#2201,#2269,#5259,.T.);+#5259=LINE('',#2202,#299);+#5260=ORIENTED_EDGE('',*,*,#5248,.F.);+#5261=ORIENTED_EDGE('',*,*,#2205,.F.);+#5262=PLANE('',#5263);+#5263=AXIS2_PLACEMENT_3D('',#2202,#256,#13);+#5264=ADVANCED_FACE('',(#5265),#5272,.F.);+#5265=FACE_BOUND('',#5266,.F.);+#5266=EDGE_LOOP('',(#5267,#2267,#5270,#5271));+#5267=ORIENTED_EDGE('',*,*,#5268,.T.);+#5268=EDGE_CURVE('',#2194,#2262,#5269,.T.);+#5269=LINE('',#2195,#299);+#5270=ORIENTED_EDGE('',*,*,#5258,.F.);+#5271=ORIENTED_EDGE('',*,*,#2200,.F.);+#5272=PLANE('',#5273);+#5273=AXIS2_PLACEMENT_3D('',#2195,#13,#1257);+#5274=ADVANCED_FACE('',(#5275),#5282,.T.);+#5275=FACE_BOUND('',#5276,.F.);+#5276=EDGE_LOOP('',(#5277,#2260,#5280,#5281));+#5277=ORIENTED_EDGE('',*,*,#5278,.T.);+#5278=EDGE_CURVE('',#2189,#2257,#5279,.T.);+#5279=LINE('',#2190,#299);+#5280=ORIENTED_EDGE('',*,*,#5268,.F.);+#5281=ORIENTED_EDGE('',*,*,#2193,.F.);+#5282=CYLINDRICAL_SURFACE('',#5283,0.2);+#5283=AXIS2_PLACEMENT_3D('',#2198,#1265,#1281);+#5284=ADVANCED_FACE('',(#5285),#5292,.F.);+#5285=FACE_BOUND('',#5286,.F.);+#5286=EDGE_LOOP('',(#5287,#2255,#5290,#5291));+#5287=ORIENTED_EDGE('',*,*,#5288,.T.);+#5288=EDGE_CURVE('',#2182,#2250,#5289,.T.);+#5289=LINE('',#2183,#299);+#5290=ORIENTED_EDGE('',*,*,#5278,.F.);+#5291=ORIENTED_EDGE('',*,*,#2188,.F.);+#5292=PLANE('',#5293);+#5293=AXIS2_PLACEMENT_3D('',#2183,#4771,#1273);+#5294=ADVANCED_FACE('',(#5295),#5302,.F.);+#5295=FACE_BOUND('',#5296,.F.);+#5296=EDGE_LOOP('',(#5297,#2248,#5300,#5301));+#5297=ORIENTED_EDGE('',*,*,#5298,.T.);+#5298=EDGE_CURVE('',#2176,#2244,#5299,.T.);+#5299=LINE('',#2177,#299);+#5300=ORIENTED_EDGE('',*,*,#5288,.F.);+#5301=ORIENTED_EDGE('',*,*,#2181,.F.);+#5302=CYLINDRICAL_SURFACE('',#2185,0.1);+#5303=ADVANCED_FACE('',(#5304),#5309,.F.);+#5304=FACE_BOUND('',#5305,.F.);+#5305=EDGE_LOOP('',(#5306,#5307,#2242,#5308));+#5306=ORIENTED_EDGE('',*,*,#2175,.F.);+#5307=ORIENTED_EDGE('',*,*,#4678,.T.);+#5308=ORIENTED_EDGE('',*,*,#5298,.F.);+#5309=PLANE('',#5310);+#5310=AXIS2_PLACEMENT_3D('',#2179,#13,#1257);+#5311=ADVANCED_FACE('',(#5312),#5319,.F.);+#5312=FACE_BOUND('',#5313,.F.);+#5313=EDGE_LOOP('',(#5314,#2440,#5317,#5318));+#5314=ORIENTED_EDGE('',*,*,#5315,.T.);+#5315=EDGE_CURVE('',#2368,#2436,#5316,.T.);+#5316=LINE('',#2369,#299);+#5317=ORIENTED_EDGE('',*,*,#2456,.F.);+#5318=ORIENTED_EDGE('',*,*,#2373,.F.);+#5319=PLANE('',#5320);+#5320=AXIS2_PLACEMENT_3D('',#2369,#4710,#1311);+#5321=ADVANCED_FACE('',(#5322),#5329,.F.);+#5322=FACE_BOUND('',#5323,.F.);+#5323=EDGE_LOOP('',(#5324,#2434,#5327,#5328));+#5324=ORIENTED_EDGE('',*,*,#5325,.T.);+#5325=EDGE_CURVE('',#2363,#2431,#5326,.T.);+#5326=LINE('',#2364,#299);+#5327=ORIENTED_EDGE('',*,*,#5315,.F.);+#5328=ORIENTED_EDGE('',*,*,#2367,.F.);+#5329=CYLINDRICAL_SURFACE('',#5330,1.E-01);+#5330=AXIS2_PLACEMENT_3D('',#2350,#1265,#1304);+#5331=ADVANCED_FACE('',(#5332),#5339,.F.);+#5332=FACE_BOUND('',#5333,.F.);+#5333=EDGE_LOOP('',(#5334,#2429,#5337,#5338));+#5334=ORIENTED_EDGE('',*,*,#5335,.T.);+#5335=EDGE_CURVE('',#2358,#2426,#5336,.T.);+#5336=LINE('',#2359,#299);+#5337=ORIENTED_EDGE('',*,*,#5325,.F.);+#5338=ORIENTED_EDGE('',*,*,#2362,.F.);+#5339=PLANE('',#5340);+#5340=AXIS2_PLACEMENT_3D('',#2359,#312,#256);+#5341=ADVANCED_FACE('',(#5342),#5349,.F.);+#5342=FACE_BOUND('',#5343,.F.);+#5343=EDGE_LOOP('',(#5344,#2424,#5347,#5348));+#5344=ORIENTED_EDGE('',*,*,#5345,.T.);+#5345=EDGE_CURVE('',#2353,#2421,#5346,.T.);+#5346=LINE('',#2354,#299);+#5347=ORIENTED_EDGE('',*,*,#5335,.F.);+#5348=ORIENTED_EDGE('',*,*,#2357,.F.);+#5349=PLANE('',#5350);+#5350=AXIS2_PLACEMENT_3D('',#2354,#256,#13);+#5351=ADVANCED_FACE('',(#5352),#5359,.F.);+#5352=FACE_BOUND('',#5353,.F.);+#5353=EDGE_LOOP('',(#5354,#2419,#5357,#5358));+#5354=ORIENTED_EDGE('',*,*,#5355,.T.);+#5355=EDGE_CURVE('',#2346,#2414,#5356,.T.);+#5356=LINE('',#2347,#299);+#5357=ORIENTED_EDGE('',*,*,#5345,.F.);+#5358=ORIENTED_EDGE('',*,*,#2352,.F.);+#5359=PLANE('',#5360);+#5360=AXIS2_PLACEMENT_3D('',#2347,#13,#1257);+#5361=ADVANCED_FACE('',(#5362),#5369,.T.);+#5362=FACE_BOUND('',#5363,.F.);+#5363=EDGE_LOOP('',(#5364,#2412,#5367,#5368));+#5364=ORIENTED_EDGE('',*,*,#5365,.T.);+#5365=EDGE_CURVE('',#2341,#2409,#5366,.T.);+#5366=LINE('',#2342,#299);+#5367=ORIENTED_EDGE('',*,*,#5355,.F.);+#5368=ORIENTED_EDGE('',*,*,#2345,.F.);+#5369=CYLINDRICAL_SURFACE('',#5370,0.2);+#5370=AXIS2_PLACEMENT_3D('',#2350,#1265,#1281);+#5371=ADVANCED_FACE('',(#5372),#5379,.F.);+#5372=FACE_BOUND('',#5373,.F.);+#5373=EDGE_LOOP('',(#5374,#2407,#5377,#5378));+#5374=ORIENTED_EDGE('',*,*,#5375,.T.);+#5375=EDGE_CURVE('',#2334,#2402,#5376,.T.);+#5376=LINE('',#2335,#299);+#5377=ORIENTED_EDGE('',*,*,#5365,.F.);+#5378=ORIENTED_EDGE('',*,*,#2340,.F.);+#5379=PLANE('',#5380);+#5380=AXIS2_PLACEMENT_3D('',#2335,#4771,#1273);+#5381=ADVANCED_FACE('',(#5382),#5389,.F.);+#5382=FACE_BOUND('',#5383,.F.);+#5383=EDGE_LOOP('',(#5384,#2400,#5387,#5388));+#5384=ORIENTED_EDGE('',*,*,#5385,.T.);+#5385=EDGE_CURVE('',#2328,#2396,#5386,.T.);+#5386=LINE('',#2329,#299);+#5387=ORIENTED_EDGE('',*,*,#5375,.F.);+#5388=ORIENTED_EDGE('',*,*,#2333,.F.);+#5389=CYLINDRICAL_SURFACE('',#2337,0.1);+#5390=ADVANCED_FACE('',(#5391),#5396,.F.);+#5391=FACE_BOUND('',#5392,.F.);+#5392=EDGE_LOOP('',(#5393,#5394,#2394,#5395));+#5393=ORIENTED_EDGE('',*,*,#2327,.F.);+#5394=ORIENTED_EDGE('',*,*,#4675,.T.);+#5395=ORIENTED_EDGE('',*,*,#5385,.F.);+#5396=PLANE('',#5397);+#5397=AXIS2_PLACEMENT_3D('',#2331,#13,#1257);+#5398=ADVANCED_FACE('',(#5399),#5406,.F.);+#5399=FACE_BOUND('',#5400,.F.);+#5400=EDGE_LOOP('',(#5401,#2592,#5404,#5405));+#5401=ORIENTED_EDGE('',*,*,#5402,.T.);+#5402=EDGE_CURVE('',#2520,#2588,#5403,.T.);+#5403=LINE('',#2521,#299);+#5404=ORIENTED_EDGE('',*,*,#2608,.F.);+#5405=ORIENTED_EDGE('',*,*,#2525,.F.);+#5406=PLANE('',#5407);+#5407=AXIS2_PLACEMENT_3D('',#2521,#4710,#1311);+#5408=ADVANCED_FACE('',(#5409),#5416,.F.);+#5409=FACE_BOUND('',#5410,.F.);+#5410=EDGE_LOOP('',(#5411,#2586,#5414,#5415));+#5411=ORIENTED_EDGE('',*,*,#5412,.T.);+#5412=EDGE_CURVE('',#2515,#2583,#5413,.T.);+#5413=LINE('',#2516,#299);+#5414=ORIENTED_EDGE('',*,*,#5402,.F.);+#5415=ORIENTED_EDGE('',*,*,#2519,.F.);+#5416=CYLINDRICAL_SURFACE('',#5417,1.E-01);+#5417=AXIS2_PLACEMENT_3D('',#2502,#1265,#1304);+#5418=ADVANCED_FACE('',(#5419),#5426,.F.);+#5419=FACE_BOUND('',#5420,.F.);+#5420=EDGE_LOOP('',(#5421,#2581,#5424,#5425));+#5421=ORIENTED_EDGE('',*,*,#5422,.T.);+#5422=EDGE_CURVE('',#2510,#2578,#5423,.T.);+#5423=LINE('',#2511,#299);+#5424=ORIENTED_EDGE('',*,*,#5412,.F.);+#5425=ORIENTED_EDGE('',*,*,#2514,.F.);+#5426=PLANE('',#5427);+#5427=AXIS2_PLACEMENT_3D('',#2511,#312,#256);+#5428=ADVANCED_FACE('',(#5429),#5436,.F.);+#5429=FACE_BOUND('',#5430,.F.);+#5430=EDGE_LOOP('',(#5431,#2576,#5434,#5435));+#5431=ORIENTED_EDGE('',*,*,#5432,.T.);+#5432=EDGE_CURVE('',#2505,#2573,#5433,.T.);+#5433=LINE('',#2506,#299);+#5434=ORIENTED_EDGE('',*,*,#5422,.F.);+#5435=ORIENTED_EDGE('',*,*,#2509,.F.);+#5436=PLANE('',#5437);+#5437=AXIS2_PLACEMENT_3D('',#2506,#256,#13);+#5438=ADVANCED_FACE('',(#5439),#5446,.F.);+#5439=FACE_BOUND('',#5440,.F.);+#5440=EDGE_LOOP('',(#5441,#2571,#5444,#5445));+#5441=ORIENTED_EDGE('',*,*,#5442,.T.);+#5442=EDGE_CURVE('',#2498,#2566,#5443,.T.);+#5443=LINE('',#2499,#299);+#5444=ORIENTED_EDGE('',*,*,#5432,.F.);+#5445=ORIENTED_EDGE('',*,*,#2504,.F.);+#5446=PLANE('',#5447);+#5447=AXIS2_PLACEMENT_3D('',#2499,#13,#1257);+#5448=ADVANCED_FACE('',(#5449),#5456,.T.);+#5449=FACE_BOUND('',#5450,.F.);+#5450=EDGE_LOOP('',(#5451,#2564,#5454,#5455));+#5451=ORIENTED_EDGE('',*,*,#5452,.T.);+#5452=EDGE_CURVE('',#2493,#2561,#5453,.T.);+#5453=LINE('',#2494,#299);+#5454=ORIENTED_EDGE('',*,*,#5442,.F.);+#5455=ORIENTED_EDGE('',*,*,#2497,.F.);+#5456=CYLINDRICAL_SURFACE('',#5457,0.2);+#5457=AXIS2_PLACEMENT_3D('',#2502,#1265,#1281);+#5458=ADVANCED_FACE('',(#5459),#5466,.F.);+#5459=FACE_BOUND('',#5460,.F.);+#5460=EDGE_LOOP('',(#5461,#2559,#5464,#5465));+#5461=ORIENTED_EDGE('',*,*,#5462,.T.);+#5462=EDGE_CURVE('',#2486,#2554,#5463,.T.);+#5463=LINE('',#2487,#299);+#5464=ORIENTED_EDGE('',*,*,#5452,.F.);+#5465=ORIENTED_EDGE('',*,*,#2492,.F.);+#5466=PLANE('',#5467);+#5467=AXIS2_PLACEMENT_3D('',#2487,#4771,#1273);+#5468=ADVANCED_FACE('',(#5469),#5476,.F.);+#5469=FACE_BOUND('',#5470,.F.);+#5470=EDGE_LOOP('',(#5471,#2552,#5474,#5475));+#5471=ORIENTED_EDGE('',*,*,#5472,.T.);+#5472=EDGE_CURVE('',#2480,#2548,#5473,.T.);+#5473=LINE('',#2481,#299);+#5474=ORIENTED_EDGE('',*,*,#5462,.F.);+#5475=ORIENTED_EDGE('',*,*,#2485,.F.);+#5476=CYLINDRICAL_SURFACE('',#2489,0.1);+#5477=ADVANCED_FACE('',(#5478),#5483,.F.);+#5478=FACE_BOUND('',#5479,.F.);+#5479=EDGE_LOOP('',(#5480,#5481,#2546,#5482));+#5480=ORIENTED_EDGE('',*,*,#2479,.F.);+#5481=ORIENTED_EDGE('',*,*,#4672,.T.);+#5482=ORIENTED_EDGE('',*,*,#5472,.F.);+#5483=PLANE('',#5484);+#5484=AXIS2_PLACEMENT_3D('',#2483,#13,#1257);+#5485=ADVANCED_FACE('',(#5486),#5493,.F.);+#5486=FACE_BOUND('',#5487,.F.);+#5487=EDGE_LOOP('',(#5488,#2744,#5491,#5492));+#5488=ORIENTED_EDGE('',*,*,#5489,.T.);+#5489=EDGE_CURVE('',#2672,#2740,#5490,.T.);+#5490=LINE('',#2673,#299);+#5491=ORIENTED_EDGE('',*,*,#2760,.F.);+#5492=ORIENTED_EDGE('',*,*,#2677,.F.);+#5493=PLANE('',#5494);+#5494=AXIS2_PLACEMENT_3D('',#2673,#4710,#1311);+#5495=ADVANCED_FACE('',(#5496),#5503,.F.);+#5496=FACE_BOUND('',#5497,.F.);+#5497=EDGE_LOOP('',(#5498,#2738,#5501,#5502));+#5498=ORIENTED_EDGE('',*,*,#5499,.T.);+#5499=EDGE_CURVE('',#2667,#2735,#5500,.T.);+#5500=LINE('',#2668,#299);+#5501=ORIENTED_EDGE('',*,*,#5489,.F.);+#5502=ORIENTED_EDGE('',*,*,#2671,.F.);+#5503=CYLINDRICAL_SURFACE('',#5504,1.E-01);+#5504=AXIS2_PLACEMENT_3D('',#2654,#1265,#1304);+#5505=ADVANCED_FACE('',(#5506),#5513,.F.);+#5506=FACE_BOUND('',#5507,.F.);+#5507=EDGE_LOOP('',(#5508,#2733,#5511,#5512));+#5508=ORIENTED_EDGE('',*,*,#5509,.T.);+#5509=EDGE_CURVE('',#2662,#2730,#5510,.T.);+#5510=LINE('',#2663,#299);+#5511=ORIENTED_EDGE('',*,*,#5499,.F.);+#5512=ORIENTED_EDGE('',*,*,#2666,.F.);+#5513=PLANE('',#5514);+#5514=AXIS2_PLACEMENT_3D('',#2663,#312,#256);+#5515=ADVANCED_FACE('',(#5516),#5523,.F.);+#5516=FACE_BOUND('',#5517,.F.);+#5517=EDGE_LOOP('',(#5518,#2728,#5521,#5522));+#5518=ORIENTED_EDGE('',*,*,#5519,.T.);+#5519=EDGE_CURVE('',#2657,#2725,#5520,.T.);+#5520=LINE('',#2658,#299);+#5521=ORIENTED_EDGE('',*,*,#5509,.F.);+#5522=ORIENTED_EDGE('',*,*,#2661,.F.);+#5523=PLANE('',#5524);+#5524=AXIS2_PLACEMENT_3D('',#2658,#256,#13);+#5525=ADVANCED_FACE('',(#5526),#5533,.F.);+#5526=FACE_BOUND('',#5527,.F.);+#5527=EDGE_LOOP('',(#5528,#2723,#5531,#5532));+#5528=ORIENTED_EDGE('',*,*,#5529,.T.);+#5529=EDGE_CURVE('',#2650,#2718,#5530,.T.);+#5530=LINE('',#2651,#299);+#5531=ORIENTED_EDGE('',*,*,#5519,.F.);+#5532=ORIENTED_EDGE('',*,*,#2656,.F.);+#5533=PLANE('',#5534);+#5534=AXIS2_PLACEMENT_3D('',#2651,#13,#1257);+#5535=ADVANCED_FACE('',(#5536),#5543,.T.);+#5536=FACE_BOUND('',#5537,.F.);+#5537=EDGE_LOOP('',(#5538,#2716,#5541,#5542));+#5538=ORIENTED_EDGE('',*,*,#5539,.T.);+#5539=EDGE_CURVE('',#2645,#2713,#5540,.T.);+#5540=LINE('',#2646,#299);+#5541=ORIENTED_EDGE('',*,*,#5529,.F.);+#5542=ORIENTED_EDGE('',*,*,#2649,.F.);+#5543=CYLINDRICAL_SURFACE('',#5544,0.2);+#5544=AXIS2_PLACEMENT_3D('',#2654,#1265,#1281);+#5545=ADVANCED_FACE('',(#5546),#5553,.F.);+#5546=FACE_BOUND('',#5547,.F.);+#5547=EDGE_LOOP('',(#5548,#2711,#5551,#5552));+#5548=ORIENTED_EDGE('',*,*,#5549,.T.);+#5549=EDGE_CURVE('',#2638,#2706,#5550,.T.);+#5550=LINE('',#2639,#299);+#5551=ORIENTED_EDGE('',*,*,#5539,.F.);+#5552=ORIENTED_EDGE('',*,*,#2644,.F.);+#5553=PLANE('',#5554);+#5554=AXIS2_PLACEMENT_3D('',#2639,#4771,#1273);+#5555=ADVANCED_FACE('',(#5556),#5563,.F.);+#5556=FACE_BOUND('',#5557,.F.);+#5557=EDGE_LOOP('',(#5558,#2704,#5561,#5562));+#5558=ORIENTED_EDGE('',*,*,#5559,.T.);+#5559=EDGE_CURVE('',#2632,#2700,#5560,.T.);+#5560=LINE('',#2633,#299);+#5561=ORIENTED_EDGE('',*,*,#5549,.F.);+#5562=ORIENTED_EDGE('',*,*,#2637,.F.);+#5563=CYLINDRICAL_SURFACE('',#2641,0.1);+#5564=ADVANCED_FACE('',(#5565),#5570,.F.);+#5565=FACE_BOUND('',#5566,.F.);+#5566=EDGE_LOOP('',(#5567,#5568,#2698,#5569));+#5567=ORIENTED_EDGE('',*,*,#2631,.F.);+#5568=ORIENTED_EDGE('',*,*,#4669,.T.);+#5569=ORIENTED_EDGE('',*,*,#5559,.F.);+#5570=PLANE('',#5571);+#5571=AXIS2_PLACEMENT_3D('',#2635,#13,#1257);+#5572=ADVANCED_FACE('',(#5573),#5580,.F.);+#5573=FACE_BOUND('',#5574,.F.);+#5574=EDGE_LOOP('',(#5575,#2896,#5578,#5579));+#5575=ORIENTED_EDGE('',*,*,#5576,.T.);+#5576=EDGE_CURVE('',#2824,#2892,#5577,.T.);+#5577=LINE('',#2825,#299);+#5578=ORIENTED_EDGE('',*,*,#2912,.F.);+#5579=ORIENTED_EDGE('',*,*,#2829,.F.);+#5580=PLANE('',#5581);+#5581=AXIS2_PLACEMENT_3D('',#2825,#4710,#1311);+#5582=ADVANCED_FACE('',(#5583),#5590,.F.);+#5583=FACE_BOUND('',#5584,.F.);+#5584=EDGE_LOOP('',(#5585,#2890,#5588,#5589));+#5585=ORIENTED_EDGE('',*,*,#5586,.T.);+#5586=EDGE_CURVE('',#2819,#2887,#5587,.T.);+#5587=LINE('',#2820,#299);+#5588=ORIENTED_EDGE('',*,*,#5576,.F.);+#5589=ORIENTED_EDGE('',*,*,#2823,.F.);+#5590=CYLINDRICAL_SURFACE('',#5591,1.E-01);+#5591=AXIS2_PLACEMENT_3D('',#2806,#1265,#1304);+#5592=ADVANCED_FACE('',(#5593),#5600,.F.);+#5593=FACE_BOUND('',#5594,.F.);+#5594=EDGE_LOOP('',(#5595,#2885,#5598,#5599));+#5595=ORIENTED_EDGE('',*,*,#5596,.T.);+#5596=EDGE_CURVE('',#2814,#2882,#5597,.T.);+#5597=LINE('',#2815,#299);+#5598=ORIENTED_EDGE('',*,*,#5586,.F.);+#5599=ORIENTED_EDGE('',*,*,#2818,.F.);+#5600=PLANE('',#5601);+#5601=AXIS2_PLACEMENT_3D('',#2815,#312,#256);+#5602=ADVANCED_FACE('',(#5603),#5610,.F.);+#5603=FACE_BOUND('',#5604,.F.);+#5604=EDGE_LOOP('',(#5605,#2880,#5608,#5609));+#5605=ORIENTED_EDGE('',*,*,#5606,.T.);+#5606=EDGE_CURVE('',#2809,#2877,#5607,.T.);+#5607=LINE('',#2810,#299);+#5608=ORIENTED_EDGE('',*,*,#5596,.F.);+#5609=ORIENTED_EDGE('',*,*,#2813,.F.);+#5610=PLANE('',#5611);+#5611=AXIS2_PLACEMENT_3D('',#2810,#256,#13);+#5612=ADVANCED_FACE('',(#5613),#5620,.F.);+#5613=FACE_BOUND('',#5614,.F.);+#5614=EDGE_LOOP('',(#5615,#2875,#5618,#5619));+#5615=ORIENTED_EDGE('',*,*,#5616,.T.);+#5616=EDGE_CURVE('',#2802,#2870,#5617,.T.);+#5617=LINE('',#2803,#299);+#5618=ORIENTED_EDGE('',*,*,#5606,.F.);+#5619=ORIENTED_EDGE('',*,*,#2808,.F.);+#5620=PLANE('',#5621);+#5621=AXIS2_PLACEMENT_3D('',#2803,#13,#1257);+#5622=ADVANCED_FACE('',(#5623),#5630,.T.);+#5623=FACE_BOUND('',#5624,.F.);+#5624=EDGE_LOOP('',(#5625,#2868,#5628,#5629));+#5625=ORIENTED_EDGE('',*,*,#5626,.T.);+#5626=EDGE_CURVE('',#2797,#2865,#5627,.T.);+#5627=LINE('',#2798,#299);+#5628=ORIENTED_EDGE('',*,*,#5616,.F.);+#5629=ORIENTED_EDGE('',*,*,#2801,.F.);+#5630=CYLINDRICAL_SURFACE('',#5631,0.2);+#5631=AXIS2_PLACEMENT_3D('',#2806,#1265,#1281);+#5632=ADVANCED_FACE('',(#5633),#5640,.F.);+#5633=FACE_BOUND('',#5634,.F.);+#5634=EDGE_LOOP('',(#5635,#2863,#5638,#5639));+#5635=ORIENTED_EDGE('',*,*,#5636,.T.);+#5636=EDGE_CURVE('',#2790,#2858,#5637,.T.);+#5637=LINE('',#2791,#299);+#5638=ORIENTED_EDGE('',*,*,#5626,.F.);+#5639=ORIENTED_EDGE('',*,*,#2796,.F.);+#5640=PLANE('',#5641);+#5641=AXIS2_PLACEMENT_3D('',#2791,#4771,#1273);+#5642=ADVANCED_FACE('',(#5643),#5650,.F.);+#5643=FACE_BOUND('',#5644,.F.);+#5644=EDGE_LOOP('',(#5645,#2856,#5648,#5649));+#5645=ORIENTED_EDGE('',*,*,#5646,.T.);+#5646=EDGE_CURVE('',#2784,#2852,#5647,.T.);+#5647=LINE('',#2785,#299);+#5648=ORIENTED_EDGE('',*,*,#5636,.F.);+#5649=ORIENTED_EDGE('',*,*,#2789,.F.);+#5650=CYLINDRICAL_SURFACE('',#2793,0.1);+#5651=ADVANCED_FACE('',(#5652),#5657,.F.);+#5652=FACE_BOUND('',#5653,.F.);+#5653=EDGE_LOOP('',(#5654,#5655,#2850,#5656));+#5654=ORIENTED_EDGE('',*,*,#2783,.F.);+#5655=ORIENTED_EDGE('',*,*,#4666,.T.);+#5656=ORIENTED_EDGE('',*,*,#5646,.F.);+#5657=PLANE('',#5658);+#5658=AXIS2_PLACEMENT_3D('',#2787,#13,#1257);+#5659=ADVANCED_FACE('',(#5660),#5667,.F.);+#5660=FACE_BOUND('',#5661,.F.);+#5661=EDGE_LOOP('',(#5662,#3048,#5665,#5666));+#5662=ORIENTED_EDGE('',*,*,#5663,.T.);+#5663=EDGE_CURVE('',#2976,#3044,#5664,.T.);+#5664=LINE('',#2977,#299);+#5665=ORIENTED_EDGE('',*,*,#3064,.F.);+#5666=ORIENTED_EDGE('',*,*,#2981,.F.);+#5667=PLANE('',#5668);+#5668=AXIS2_PLACEMENT_3D('',#2977,#4710,#1311);+#5669=ADVANCED_FACE('',(#5670),#5677,.F.);+#5670=FACE_BOUND('',#5671,.F.);+#5671=EDGE_LOOP('',(#5672,#3042,#5675,#5676));+#5672=ORIENTED_EDGE('',*,*,#5673,.T.);+#5673=EDGE_CURVE('',#2971,#3039,#5674,.T.);+#5674=LINE('',#2972,#299);+#5675=ORIENTED_EDGE('',*,*,#5663,.F.);+#5676=ORIENTED_EDGE('',*,*,#2975,.F.);+#5677=CYLINDRICAL_SURFACE('',#5678,1.E-01);+#5678=AXIS2_PLACEMENT_3D('',#2958,#1265,#1304);+#5679=ADVANCED_FACE('',(#5680),#5687,.F.);+#5680=FACE_BOUND('',#5681,.F.);+#5681=EDGE_LOOP('',(#5682,#3037,#5685,#5686));+#5682=ORIENTED_EDGE('',*,*,#5683,.T.);+#5683=EDGE_CURVE('',#2966,#3034,#5684,.T.);+#5684=LINE('',#2967,#299);+#5685=ORIENTED_EDGE('',*,*,#5673,.F.);+#5686=ORIENTED_EDGE('',*,*,#2970,.F.);+#5687=PLANE('',#5688);+#5688=AXIS2_PLACEMENT_3D('',#2967,#312,#256);+#5689=ADVANCED_FACE('',(#5690),#5697,.F.);+#5690=FACE_BOUND('',#5691,.F.);+#5691=EDGE_LOOP('',(#5692,#3032,#5695,#5696));+#5692=ORIENTED_EDGE('',*,*,#5693,.T.);+#5693=EDGE_CURVE('',#2961,#3029,#5694,.T.);+#5694=LINE('',#2962,#299);+#5695=ORIENTED_EDGE('',*,*,#5683,.F.);+#5696=ORIENTED_EDGE('',*,*,#2965,.F.);+#5697=PLANE('',#5698);+#5698=AXIS2_PLACEMENT_3D('',#2962,#256,#13);+#5699=ADVANCED_FACE('',(#5700),#5707,.F.);+#5700=FACE_BOUND('',#5701,.F.);+#5701=EDGE_LOOP('',(#5702,#3027,#5705,#5706));+#5702=ORIENTED_EDGE('',*,*,#5703,.T.);+#5703=EDGE_CURVE('',#2954,#3022,#5704,.T.);+#5704=LINE('',#2955,#299);+#5705=ORIENTED_EDGE('',*,*,#5693,.F.);+#5706=ORIENTED_EDGE('',*,*,#2960,.F.);+#5707=PLANE('',#5708);+#5708=AXIS2_PLACEMENT_3D('',#2955,#13,#1257);+#5709=ADVANCED_FACE('',(#5710),#5717,.T.);+#5710=FACE_BOUND('',#5711,.F.);+#5711=EDGE_LOOP('',(#5712,#3020,#5715,#5716));+#5712=ORIENTED_EDGE('',*,*,#5713,.T.);+#5713=EDGE_CURVE('',#2949,#3017,#5714,.T.);+#5714=LINE('',#2950,#299);+#5715=ORIENTED_EDGE('',*,*,#5703,.F.);+#5716=ORIENTED_EDGE('',*,*,#2953,.F.);+#5717=CYLINDRICAL_SURFACE('',#5718,0.2);+#5718=AXIS2_PLACEMENT_3D('',#2958,#1265,#1281);+#5719=ADVANCED_FACE('',(#5720),#5727,.F.);+#5720=FACE_BOUND('',#5721,.F.);+#5721=EDGE_LOOP('',(#5722,#3015,#5725,#5726));+#5722=ORIENTED_EDGE('',*,*,#5723,.T.);+#5723=EDGE_CURVE('',#2942,#3010,#5724,.T.);+#5724=LINE('',#2943,#299);+#5725=ORIENTED_EDGE('',*,*,#5713,.F.);+#5726=ORIENTED_EDGE('',*,*,#2948,.F.);+#5727=PLANE('',#5728);+#5728=AXIS2_PLACEMENT_3D('',#2943,#4771,#1273);+#5729=ADVANCED_FACE('',(#5730),#5737,.F.);+#5730=FACE_BOUND('',#5731,.F.);+#5731=EDGE_LOOP('',(#5732,#3008,#5735,#5736));+#5732=ORIENTED_EDGE('',*,*,#5733,.T.);+#5733=EDGE_CURVE('',#2936,#3004,#5734,.T.);+#5734=LINE('',#2937,#299);+#5735=ORIENTED_EDGE('',*,*,#5723,.F.);+#5736=ORIENTED_EDGE('',*,*,#2941,.F.);+#5737=CYLINDRICAL_SURFACE('',#2945,0.1);+#5738=ADVANCED_FACE('',(#5739),#5744,.F.);+#5739=FACE_BOUND('',#5740,.F.);+#5740=EDGE_LOOP('',(#5741,#5742,#3002,#5743));+#5741=ORIENTED_EDGE('',*,*,#2935,.F.);+#5742=ORIENTED_EDGE('',*,*,#4663,.T.);+#5743=ORIENTED_EDGE('',*,*,#5733,.F.);+#5744=PLANE('',#5745);+#5745=AXIS2_PLACEMENT_3D('',#2939,#13,#1257);+#5746=ADVANCED_FACE('',(#5747),#5754,.F.);+#5747=FACE_BOUND('',#5748,.F.);+#5748=EDGE_LOOP('',(#5749,#3200,#5752,#5753));+#5749=ORIENTED_EDGE('',*,*,#5750,.T.);+#5750=EDGE_CURVE('',#3128,#3196,#5751,.T.);+#5751=LINE('',#3129,#299);+#5752=ORIENTED_EDGE('',*,*,#3216,.F.);+#5753=ORIENTED_EDGE('',*,*,#3133,.F.);+#5754=PLANE('',#5755);+#5755=AXIS2_PLACEMENT_3D('',#3129,#4710,#1311);+#5756=ADVANCED_FACE('',(#5757),#5764,.F.);+#5757=FACE_BOUND('',#5758,.F.);+#5758=EDGE_LOOP('',(#5759,#3194,#5762,#5763));+#5759=ORIENTED_EDGE('',*,*,#5760,.T.);+#5760=EDGE_CURVE('',#3123,#3191,#5761,.T.);+#5761=LINE('',#3124,#299);+#5762=ORIENTED_EDGE('',*,*,#5750,.F.);+#5763=ORIENTED_EDGE('',*,*,#3127,.F.);+#5764=CYLINDRICAL_SURFACE('',#5765,1.E-01);+#5765=AXIS2_PLACEMENT_3D('',#3110,#1265,#1304);+#5766=ADVANCED_FACE('',(#5767),#5774,.F.);+#5767=FACE_BOUND('',#5768,.F.);+#5768=EDGE_LOOP('',(#5769,#3189,#5772,#5773));+#5769=ORIENTED_EDGE('',*,*,#5770,.T.);+#5770=EDGE_CURVE('',#3118,#3186,#5771,.T.);+#5771=LINE('',#3119,#299);+#5772=ORIENTED_EDGE('',*,*,#5760,.F.);+#5773=ORIENTED_EDGE('',*,*,#3122,.F.);+#5774=PLANE('',#5775);+#5775=AXIS2_PLACEMENT_3D('',#3119,#312,#256);+#5776=ADVANCED_FACE('',(#5777),#5784,.F.);+#5777=FACE_BOUND('',#5778,.F.);+#5778=EDGE_LOOP('',(#5779,#3184,#5782,#5783));+#5779=ORIENTED_EDGE('',*,*,#5780,.T.);+#5780=EDGE_CURVE('',#3113,#3181,#5781,.T.);+#5781=LINE('',#3114,#299);+#5782=ORIENTED_EDGE('',*,*,#5770,.F.);+#5783=ORIENTED_EDGE('',*,*,#3117,.F.);+#5784=PLANE('',#5785);+#5785=AXIS2_PLACEMENT_3D('',#3114,#256,#13);+#5786=ADVANCED_FACE('',(#5787),#5794,.F.);+#5787=FACE_BOUND('',#5788,.F.);+#5788=EDGE_LOOP('',(#5789,#3179,#5792,#5793));+#5789=ORIENTED_EDGE('',*,*,#5790,.T.);+#5790=EDGE_CURVE('',#3106,#3174,#5791,.T.);+#5791=LINE('',#3107,#299);+#5792=ORIENTED_EDGE('',*,*,#5780,.F.);+#5793=ORIENTED_EDGE('',*,*,#3112,.F.);+#5794=PLANE('',#5795);+#5795=AXIS2_PLACEMENT_3D('',#3107,#13,#1257);+#5796=ADVANCED_FACE('',(#5797),#5804,.T.);+#5797=FACE_BOUND('',#5798,.F.);+#5798=EDGE_LOOP('',(#5799,#3172,#5802,#5803));+#5799=ORIENTED_EDGE('',*,*,#5800,.T.);+#5800=EDGE_CURVE('',#3101,#3169,#5801,.T.);+#5801=LINE('',#3102,#299);+#5802=ORIENTED_EDGE('',*,*,#5790,.F.);+#5803=ORIENTED_EDGE('',*,*,#3105,.F.);+#5804=CYLINDRICAL_SURFACE('',#5805,0.2);+#5805=AXIS2_PLACEMENT_3D('',#3110,#1265,#1281);+#5806=ADVANCED_FACE('',(#5807),#5814,.F.);+#5807=FACE_BOUND('',#5808,.F.);+#5808=EDGE_LOOP('',(#5809,#3167,#5812,#5813));+#5809=ORIENTED_EDGE('',*,*,#5810,.T.);+#5810=EDGE_CURVE('',#3094,#3162,#5811,.T.);+#5811=LINE('',#3095,#299);+#5812=ORIENTED_EDGE('',*,*,#5800,.F.);+#5813=ORIENTED_EDGE('',*,*,#3100,.F.);+#5814=PLANE('',#5815);+#5815=AXIS2_PLACEMENT_3D('',#3095,#4771,#1273);+#5816=ADVANCED_FACE('',(#5817),#5824,.F.);+#5817=FACE_BOUND('',#5818,.F.);+#5818=EDGE_LOOP('',(#5819,#3160,#5822,#5823));+#5819=ORIENTED_EDGE('',*,*,#5820,.T.);+#5820=EDGE_CURVE('',#3088,#3156,#5821,.T.);+#5821=LINE('',#3089,#299);+#5822=ORIENTED_EDGE('',*,*,#5810,.F.);+#5823=ORIENTED_EDGE('',*,*,#3093,.F.);+#5824=CYLINDRICAL_SURFACE('',#3097,0.1);+#5825=ADVANCED_FACE('',(#5826),#5831,.F.);+#5826=FACE_BOUND('',#5827,.F.);+#5827=EDGE_LOOP('',(#5828,#5829,#3154,#5830));+#5828=ORIENTED_EDGE('',*,*,#3087,.F.);+#5829=ORIENTED_EDGE('',*,*,#4660,.T.);+#5830=ORIENTED_EDGE('',*,*,#5820,.F.);+#5831=PLANE('',#5832);+#5832=AXIS2_PLACEMENT_3D('',#3091,#13,#1257);+#5833=ADVANCED_FACE('',(#5834),#5901,.F.);+#5834=FACE_BOUND('',#5835,.F.);+#5835=EDGE_LOOP('',(#5836,#5837,#5843,#5851,#5858,#5866,#5871,#5876,#5881,#5888,#5895,#5900));+#5836=ORIENTED_EDGE('',*,*,#3258,.F.);+#5837=ORIENTED_EDGE('',*,*,#5838,.T.);+#5838=EDGE_CURVE('',#3254,#5839,#5841,.T.);+#5839=VERTEX_POINT('',#5840);+#5840=CARTESIAN_POINT('',(7.2,6.22,0.75));+#5841=LINE('',#5842,#49);+#5842=CARTESIAN_POINT('',(6.85,6.22,0.75));+#5843=ORIENTED_EDGE('',*,*,#5844,.T.);+#5844=EDGE_CURVE('',#5839,#5845,#5847,.T.);+#5845=VERTEX_POINT('',#5846);+#5846=CARTESIAN_POINT('',(7.298480775301,6.22,0.667364817767));+#5847=CIRCLE('',#5848,0.1);+#5848=AXIS2_PLACEMENT_3D('',#5849,#270,#5850);+#5849=CARTESIAN_POINT('',(7.2,6.22,0.65));+#5850=DIRECTION('',(-8.881784197001E-15,-9.860761315263E-31,1.));+#5851=ORIENTED_EDGE('',*,*,#5852,.T.);+#5852=EDGE_CURVE('',#5845,#5853,#5855,.T.);+#5853=VERTEX_POINT('',#5854);+#5854=CARTESIAN_POINT('',(7.382385590716,6.22,0.165270364467));+#5855=LINE('',#5846,#5856);+#5856=VECTOR('',#5857,1.);+#5857=DIRECTION('',(0.16482406317,1.829914699438E-17,-0.986322983713));+#5858=ORIENTED_EDGE('',*,*,#5859,.T.);+#5859=EDGE_CURVE('',#5853,#5860,#5862,.T.);+#5860=VERTEX_POINT('',#5861);+#5861=CARTESIAN_POINT('',(7.579347141319,6.22,1.387778780781E-16));+#5862=CIRCLE('',#5863,0.2);+#5863=AXIS2_PLACEMENT_3D('',#5864,#752,#5865);+#5864=CARTESIAN_POINT('',(7.579347141319,6.22,0.2));+#5865=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#5866=ORIENTED_EDGE('',*,*,#5867,.T.);+#5867=EDGE_CURVE('',#5860,#5868,#5870,.T.);+#5868=VERTEX_POINT('',#5869);+#5869=CARTESIAN_POINT('',(8.,6.22,1.387778780781E-16));+#5870=LINE('',#5861,#49);+#5871=ORIENTED_EDGE('',*,*,#5872,.T.);+#5872=EDGE_CURVE('',#5868,#5873,#5875,.T.);+#5873=VERTEX_POINT('',#5874);+#5874=CARTESIAN_POINT('',(8.,6.22,0.1));+#5875=LINE('',#5869,#1074);+#5876=ORIENTED_EDGE('',*,*,#5877,.T.);+#5877=EDGE_CURVE('',#5873,#5878,#5880,.T.);+#5878=VERTEX_POINT('',#5879);+#5879=CARTESIAN_POINT('',(7.579347141319,6.22,0.1));+#5880=LINE('',#5874,#759);+#5881=ORIENTED_EDGE('',*,*,#5882,.T.);+#5882=EDGE_CURVE('',#5878,#5883,#5885,.T.);+#5883=VERTEX_POINT('',#5884);+#5884=CARTESIAN_POINT('',(7.480866366018,6.22,0.182635182233));+#5885=CIRCLE('',#5886,1.E-01);+#5886=AXIS2_PLACEMENT_3D('',#5864,#270,#5887);+#5887=DIRECTION('',(8.881784197001E-15,9.860761315263E-31,-1.));+#5888=ORIENTED_EDGE('',*,*,#5889,.T.);+#5889=EDGE_CURVE('',#5883,#5890,#5892,.T.);+#5890=VERTEX_POINT('',#5891);+#5891=CARTESIAN_POINT('',(7.396961550602,6.22,0.684729635533));+#5892=LINE('',#5884,#5893);+#5893=VECTOR('',#5894,1.);+#5894=DIRECTION('',(-0.16482406317,-1.829914699438E-17,0.986322983713));+#5895=ORIENTED_EDGE('',*,*,#5896,.T.);+#5896=EDGE_CURVE('',#5890,#3227,#5897,.T.);+#5897=CIRCLE('',#5898,0.2);+#5898=AXIS2_PLACEMENT_3D('',#5849,#752,#5899);+#5899=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#5900=ORIENTED_EDGE('',*,*,#3226,.T.);+#5901=PLANE('',#5902);+#5902=AXIS2_PLACEMENT_3D('',#5903,#752,#13);+#5903=CARTESIAN_POINT('',(7.414276639233,6.22,0.410238158856));+#5904=ADVANCED_FACE('',(#5905),#5968,.T.);+#5905=FACE_BOUND('',#5906,.T.);+#5906=EDGE_LOOP('',(#5907,#5913,#5919,#5926,#5931,#5938,#5943,#5948,#5953,#5959,#5964,#3233));+#5907=ORIENTED_EDGE('',*,*,#5908,.F.);+#5908=EDGE_CURVE('',#5909,#3235,#5911,.T.);+#5909=VERTEX_POINT('',#5910);+#5910=CARTESIAN_POINT('',(7.,5.78,0.75));+#5911=LINE('',#5912,#1074);+#5912=CARTESIAN_POINT('',(7.,5.78,0.630119079428));+#5913=ORIENTED_EDGE('',*,*,#5914,.T.);+#5914=EDGE_CURVE('',#5909,#5915,#5917,.T.);+#5915=VERTEX_POINT('',#5916);+#5916=CARTESIAN_POINT('',(7.2,5.78,0.75));+#5917=LINE('',#5918,#49);+#5918=CARTESIAN_POINT('',(6.85,5.78,0.75));+#5919=ORIENTED_EDGE('',*,*,#5920,.T.);+#5920=EDGE_CURVE('',#5915,#5921,#5923,.T.);+#5921=VERTEX_POINT('',#5922);+#5922=CARTESIAN_POINT('',(7.298480775301,5.78,0.667364817767));+#5923=CIRCLE('',#5924,0.1);+#5924=AXIS2_PLACEMENT_3D('',#5925,#270,#5850);+#5925=CARTESIAN_POINT('',(7.2,5.78,0.65));+#5926=ORIENTED_EDGE('',*,*,#5927,.T.);+#5927=EDGE_CURVE('',#5921,#5928,#5930,.T.);+#5928=VERTEX_POINT('',#5929);+#5929=CARTESIAN_POINT('',(7.382385590716,5.78,0.165270364467));+#5930=LINE('',#5922,#5856);+#5931=ORIENTED_EDGE('',*,*,#5932,.T.);+#5932=EDGE_CURVE('',#5928,#5933,#5935,.T.);+#5933=VERTEX_POINT('',#5934);+#5934=CARTESIAN_POINT('',(7.579347141319,5.78,1.387778780781E-16));+#5935=CIRCLE('',#5936,0.2);+#5936=AXIS2_PLACEMENT_3D('',#5937,#752,#5865);+#5937=CARTESIAN_POINT('',(7.579347141319,5.78,0.2));+#5938=ORIENTED_EDGE('',*,*,#5939,.T.);+#5939=EDGE_CURVE('',#5933,#5940,#5942,.T.);+#5940=VERTEX_POINT('',#5941);+#5941=CARTESIAN_POINT('',(8.,5.78,1.387778780781E-16));+#5942=LINE('',#5934,#49);+#5943=ORIENTED_EDGE('',*,*,#5944,.T.);+#5944=EDGE_CURVE('',#5940,#5945,#5947,.T.);+#5945=VERTEX_POINT('',#5946);+#5946=CARTESIAN_POINT('',(8.,5.78,0.1));+#5947=LINE('',#5941,#1074);+#5948=ORIENTED_EDGE('',*,*,#5949,.T.);+#5949=EDGE_CURVE('',#5945,#5950,#5952,.T.);+#5950=VERTEX_POINT('',#5951);+#5951=CARTESIAN_POINT('',(7.579347141319,5.78,0.1));+#5952=LINE('',#5946,#759);+#5953=ORIENTED_EDGE('',*,*,#5954,.T.);+#5954=EDGE_CURVE('',#5950,#5955,#5957,.T.);+#5955=VERTEX_POINT('',#5956);+#5956=CARTESIAN_POINT('',(7.480866366018,5.78,0.182635182233));+#5957=CIRCLE('',#5958,1.E-01);+#5958=AXIS2_PLACEMENT_3D('',#5937,#270,#5887);+#5959=ORIENTED_EDGE('',*,*,#5960,.T.);+#5960=EDGE_CURVE('',#5955,#5961,#5963,.T.);+#5961=VERTEX_POINT('',#5962);+#5962=CARTESIAN_POINT('',(7.396961550602,5.78,0.684729635533));+#5963=LINE('',#5956,#5893);+#5964=ORIENTED_EDGE('',*,*,#5965,.T.);+#5965=EDGE_CURVE('',#5961,#3230,#5966,.T.);+#5966=CIRCLE('',#5967,0.2);+#5967=AXIS2_PLACEMENT_3D('',#5925,#752,#5899);+#5968=PLANE('',#5969);+#5969=AXIS2_PLACEMENT_3D('',#5970,#752,#13);+#5970=CARTESIAN_POINT('',(7.414276639233,5.78,0.410238158856));+#5971=ADVANCED_FACE('',(#5972),#5979,.T.);+#5972=FACE_BOUND('',#5973,.F.);+#5973=EDGE_LOOP('',(#5974,#5964,#5977,#5978));+#5974=ORIENTED_EDGE('',*,*,#5975,.T.);+#5975=EDGE_CURVE('',#5890,#5961,#5976,.T.);+#5976=LINE('',#5891,#751);+#5977=ORIENTED_EDGE('',*,*,#3229,.F.);+#5978=ORIENTED_EDGE('',*,*,#5896,.F.);+#5979=CYLINDRICAL_SURFACE('',#5980,0.2);+#5980=AXIS2_PLACEMENT_3D('',#5849,#270,#5899);+#5981=ADVANCED_FACE('',(#5982),#6100,.F.);+#5982=FACE_BOUND('',#5983,.F.);+#5983=EDGE_LOOP('',(#5984,#5991,#5996,#6000,#6004,#6008,#6012,#6016,#6020,#6024,#6028,#6032,#6036,#6040,#6044,#6048,#6052,#6056,#6060,#6064,#6068,#6072,#6076,#6080,#6084,#6088,#6092,#6094,#6096,#6097));+#5984=ORIENTED_EDGE('',*,*,#5985,.T.);+#5985=EDGE_CURVE('',#5986,#5988,#5990,.T.);+#5986=VERTEX_POINT('',#5987);+#5987=CARTESIAN_POINT('',(6.861838234914,6.755919117457,0.1));+#5988=VERTEX_POINT('',#5989);+#5989=CARTESIAN_POINT('',(6.861838234914,-6.755919117457,0.1));+#5990=LINE('',#5987,#751);+#5991=ORIENTED_EDGE('',*,*,#5992,.T.);+#5992=EDGE_CURVE('',#5988,#5993,#5995,.T.);+#5993=VERTEX_POINT('',#5994);+#5994=CARTESIAN_POINT('',(7.,-6.825,0.75));+#5995=B_SPLINE_CURVE_WITH_KNOTS('',1,(#5989,#5994),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#5996=ORIENTED_EDGE('',*,*,#5997,.F.);+#5997=EDGE_CURVE('',#5998,#5993,#3256,.T.);+#5998=VERTEX_POINT('',#5999);+#5999=CARTESIAN_POINT('',(7.,-6.22,0.75));+#6000=ORIENTED_EDGE('',*,*,#6001,.F.);+#6001=EDGE_CURVE('',#6002,#5998,#3256,.T.);+#6002=VERTEX_POINT('',#6003);+#6003=CARTESIAN_POINT('',(7.,-5.78,0.75));+#6004=ORIENTED_EDGE('',*,*,#6005,.F.);+#6005=EDGE_CURVE('',#6006,#6002,#3256,.T.);+#6006=VERTEX_POINT('',#6007);+#6007=CARTESIAN_POINT('',(7.,-5.22,0.75));+#6008=ORIENTED_EDGE('',*,*,#6009,.F.);+#6009=EDGE_CURVE('',#6010,#6006,#3256,.T.);+#6010=VERTEX_POINT('',#6011);+#6011=CARTESIAN_POINT('',(7.,-4.78,0.75));+#6012=ORIENTED_EDGE('',*,*,#6013,.F.);+#6013=EDGE_CURVE('',#6014,#6010,#3256,.T.);+#6014=VERTEX_POINT('',#6015);+#6015=CARTESIAN_POINT('',(7.,-4.22,0.75));+#6016=ORIENTED_EDGE('',*,*,#6017,.F.);+#6017=EDGE_CURVE('',#6018,#6014,#3256,.T.);+#6018=VERTEX_POINT('',#6019);+#6019=CARTESIAN_POINT('',(7.,-3.78,0.75));+#6020=ORIENTED_EDGE('',*,*,#6021,.F.);+#6021=EDGE_CURVE('',#6022,#6018,#3256,.T.);+#6022=VERTEX_POINT('',#6023);+#6023=CARTESIAN_POINT('',(7.,-3.22,0.75));+#6024=ORIENTED_EDGE('',*,*,#6025,.F.);+#6025=EDGE_CURVE('',#6026,#6022,#3256,.T.);+#6026=VERTEX_POINT('',#6027);+#6027=CARTESIAN_POINT('',(7.,-2.78,0.75));+#6028=ORIENTED_EDGE('',*,*,#6029,.F.);+#6029=EDGE_CURVE('',#6030,#6026,#3256,.T.);+#6030=VERTEX_POINT('',#6031);+#6031=CARTESIAN_POINT('',(7.,-2.22,0.75));+#6032=ORIENTED_EDGE('',*,*,#6033,.F.);+#6033=EDGE_CURVE('',#6034,#6030,#3256,.T.);+#6034=VERTEX_POINT('',#6035);+#6035=CARTESIAN_POINT('',(7.,-1.78,0.75));+#6036=ORIENTED_EDGE('',*,*,#6037,.F.);+#6037=EDGE_CURVE('',#6038,#6034,#3256,.T.);+#6038=VERTEX_POINT('',#6039);+#6039=CARTESIAN_POINT('',(7.,-1.22,0.75));+#6040=ORIENTED_EDGE('',*,*,#6041,.F.);+#6041=EDGE_CURVE('',#6042,#6038,#3256,.T.);+#6042=VERTEX_POINT('',#6043);+#6043=CARTESIAN_POINT('',(7.,-0.78,0.75));+#6044=ORIENTED_EDGE('',*,*,#6045,.F.);+#6045=EDGE_CURVE('',#6046,#6042,#3256,.T.);+#6046=VERTEX_POINT('',#6047);+#6047=CARTESIAN_POINT('',(7.,-0.22,0.75));+#6048=ORIENTED_EDGE('',*,*,#6049,.F.);+#6049=EDGE_CURVE('',#6050,#6046,#3256,.T.);+#6050=VERTEX_POINT('',#6051);+#6051=CARTESIAN_POINT('',(7.,0.22,0.75));+#6052=ORIENTED_EDGE('',*,*,#6053,.F.);+#6053=EDGE_CURVE('',#6054,#6050,#3256,.T.);+#6054=VERTEX_POINT('',#6055);+#6055=CARTESIAN_POINT('',(7.,0.78,0.75));+#6056=ORIENTED_EDGE('',*,*,#6057,.F.);+#6057=EDGE_CURVE('',#6058,#6054,#3256,.T.);+#6058=VERTEX_POINT('',#6059);+#6059=CARTESIAN_POINT('',(7.,1.22,0.75));+#6060=ORIENTED_EDGE('',*,*,#6061,.F.);+#6061=EDGE_CURVE('',#6062,#6058,#3256,.T.);+#6062=VERTEX_POINT('',#6063);+#6063=CARTESIAN_POINT('',(7.,1.78,0.75));+#6064=ORIENTED_EDGE('',*,*,#6065,.F.);+#6065=EDGE_CURVE('',#6066,#6062,#3256,.T.);+#6066=VERTEX_POINT('',#6067);+#6067=CARTESIAN_POINT('',(7.,2.22,0.75));+#6068=ORIENTED_EDGE('',*,*,#6069,.F.);+#6069=EDGE_CURVE('',#6070,#6066,#3256,.T.);+#6070=VERTEX_POINT('',#6071);+#6071=CARTESIAN_POINT('',(7.,2.78,0.75));+#6072=ORIENTED_EDGE('',*,*,#6073,.F.);+#6073=EDGE_CURVE('',#6074,#6070,#3256,.T.);+#6074=VERTEX_POINT('',#6075);+#6075=CARTESIAN_POINT('',(7.,3.22,0.75));+#6076=ORIENTED_EDGE('',*,*,#6077,.F.);+#6077=EDGE_CURVE('',#6078,#6074,#3256,.T.);+#6078=VERTEX_POINT('',#6079);+#6079=CARTESIAN_POINT('',(7.,3.78,0.75));+#6080=ORIENTED_EDGE('',*,*,#6081,.F.);+#6081=EDGE_CURVE('',#6082,#6078,#3256,.T.);+#6082=VERTEX_POINT('',#6083);+#6083=CARTESIAN_POINT('',(7.,4.22,0.75));+#6084=ORIENTED_EDGE('',*,*,#6085,.F.);+#6085=EDGE_CURVE('',#6086,#6082,#3256,.T.);+#6086=VERTEX_POINT('',#6087);+#6087=CARTESIAN_POINT('',(7.,4.78,0.75));+#6088=ORIENTED_EDGE('',*,*,#6089,.F.);+#6089=EDGE_CURVE('',#6090,#6086,#3256,.T.);+#6090=VERTEX_POINT('',#6091);+#6091=CARTESIAN_POINT('',(7.,5.22,0.75));+#6092=ORIENTED_EDGE('',*,*,#6093,.F.);+#6093=EDGE_CURVE('',#5909,#6090,#3256,.T.);+#6094=ORIENTED_EDGE('',*,*,#6095,.F.);+#6095=EDGE_CURVE('',#3254,#5909,#3256,.T.);+#6096=ORIENTED_EDGE('',*,*,#3253,.F.);+#6097=ORIENTED_EDGE('',*,*,#6098,.F.);+#6098=EDGE_CURVE('',#5986,#3249,#6099,.T.);+#6099=B_SPLINE_CURVE_WITH_KNOTS('',1,(#5987,#3250),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6100=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#5987,#3250),(#5989,#5994)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6101=ADVANCED_FACE('',(#6102),#6110,.F.);+#6102=FACE_BOUND('',#6103,.F.);+#6103=EDGE_LOOP('',(#6104,#6107,#6108,#6109));+#6104=ORIENTED_EDGE('',*,*,#6105,.T.);+#6105=EDGE_CURVE('',#4652,#5986,#6106,.T.);+#6106=LINE('',#4653,#177);+#6107=ORIENTED_EDGE('',*,*,#6098,.T.);+#6108=ORIENTED_EDGE('',*,*,#3268,.F.);+#6109=ORIENTED_EDGE('',*,*,#4656,.F.);+#6110=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#4653,#3270),(#5987,#3250)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6111=ADVANCED_FACE('',(#6112),#6216,.F.);+#6112=FACE_BOUND('',#6113,.F.);+#6113=EDGE_LOOP('',(#6114,#3881,#6115,#6116,#6117,#6121,#6125,#6129,#6133,#6137,#6141,#6145,#6149,#6153,#6157,#6161,#6165,#6169,#6173,#6177,#6181,#6185,#6189,#6193,#6197,#6201,#6205,#6209,#6213,#6215));+#6114=ORIENTED_EDGE('',*,*,#4642,.T.);+#6115=ORIENTED_EDGE('',*,*,#3291,.F.);+#6116=ORIENTED_EDGE('',*,*,#3787,.T.);+#6117=ORIENTED_EDGE('',*,*,#6118,.T.);+#6118=EDGE_CURVE('',#3780,#6119,#3788,.T.);+#6119=VERTEX_POINT('',#6120);+#6120=CARTESIAN_POINT('',(5.78,-6.925,0.85));+#6121=ORIENTED_EDGE('',*,*,#6122,.T.);+#6122=EDGE_CURVE('',#6119,#6123,#3788,.T.);+#6123=VERTEX_POINT('',#6124);+#6124=CARTESIAN_POINT('',(5.22,-6.925,0.85));+#6125=ORIENTED_EDGE('',*,*,#6126,.T.);+#6126=EDGE_CURVE('',#6123,#6127,#3788,.T.);+#6127=VERTEX_POINT('',#6128);+#6128=CARTESIAN_POINT('',(4.78,-6.925,0.85));+#6129=ORIENTED_EDGE('',*,*,#6130,.T.);+#6130=EDGE_CURVE('',#6127,#6131,#3788,.T.);+#6131=VERTEX_POINT('',#6132);+#6132=CARTESIAN_POINT('',(4.22,-6.925,0.85));+#6133=ORIENTED_EDGE('',*,*,#6134,.T.);+#6134=EDGE_CURVE('',#6131,#6135,#3788,.T.);+#6135=VERTEX_POINT('',#6136);+#6136=CARTESIAN_POINT('',(3.78,-6.925,0.85));+#6137=ORIENTED_EDGE('',*,*,#6138,.T.);+#6138=EDGE_CURVE('',#6135,#6139,#3788,.T.);+#6139=VERTEX_POINT('',#6140);+#6140=CARTESIAN_POINT('',(3.22,-6.925,0.85));+#6141=ORIENTED_EDGE('',*,*,#6142,.T.);+#6142=EDGE_CURVE('',#6139,#6143,#3788,.T.);+#6143=VERTEX_POINT('',#6144);+#6144=CARTESIAN_POINT('',(2.78,-6.925,0.85));+#6145=ORIENTED_EDGE('',*,*,#6146,.T.);+#6146=EDGE_CURVE('',#6143,#6147,#3788,.T.);+#6147=VERTEX_POINT('',#6148);+#6148=CARTESIAN_POINT('',(2.22,-6.925,0.85));+#6149=ORIENTED_EDGE('',*,*,#6150,.T.);+#6150=EDGE_CURVE('',#6147,#6151,#3788,.T.);+#6151=VERTEX_POINT('',#6152);+#6152=CARTESIAN_POINT('',(1.78,-6.925,0.85));+#6153=ORIENTED_EDGE('',*,*,#6154,.T.);+#6154=EDGE_CURVE('',#6151,#6155,#3788,.T.);+#6155=VERTEX_POINT('',#6156);+#6156=CARTESIAN_POINT('',(1.22,-6.925,0.85));+#6157=ORIENTED_EDGE('',*,*,#6158,.T.);+#6158=EDGE_CURVE('',#6155,#6159,#3788,.T.);+#6159=VERTEX_POINT('',#6160);+#6160=CARTESIAN_POINT('',(0.78,-6.925,0.85));+#6161=ORIENTED_EDGE('',*,*,#6162,.T.);+#6162=EDGE_CURVE('',#6159,#6163,#3788,.T.);+#6163=VERTEX_POINT('',#6164);+#6164=CARTESIAN_POINT('',(0.22,-6.925,0.85));+#6165=ORIENTED_EDGE('',*,*,#6166,.T.);+#6166=EDGE_CURVE('',#6163,#6167,#3788,.T.);+#6167=VERTEX_POINT('',#6168);+#6168=CARTESIAN_POINT('',(-0.22,-6.925,0.85));+#6169=ORIENTED_EDGE('',*,*,#6170,.T.);+#6170=EDGE_CURVE('',#6167,#6171,#3788,.T.);+#6171=VERTEX_POINT('',#6172);+#6172=CARTESIAN_POINT('',(-0.78,-6.925,0.85));+#6173=ORIENTED_EDGE('',*,*,#6174,.T.);+#6174=EDGE_CURVE('',#6171,#6175,#3788,.T.);+#6175=VERTEX_POINT('',#6176);+#6176=CARTESIAN_POINT('',(-1.22,-6.925,0.85));+#6177=ORIENTED_EDGE('',*,*,#6178,.T.);+#6178=EDGE_CURVE('',#6175,#6179,#3788,.T.);+#6179=VERTEX_POINT('',#6180);+#6180=CARTESIAN_POINT('',(-1.78,-6.925,0.85));+#6181=ORIENTED_EDGE('',*,*,#6182,.T.);+#6182=EDGE_CURVE('',#6179,#6183,#3788,.T.);+#6183=VERTEX_POINT('',#6184);+#6184=CARTESIAN_POINT('',(-2.22,-6.925,0.85));+#6185=ORIENTED_EDGE('',*,*,#6186,.T.);+#6186=EDGE_CURVE('',#6183,#6187,#3788,.T.);+#6187=VERTEX_POINT('',#6188);+#6188=CARTESIAN_POINT('',(-2.78,-6.925,0.85));+#6189=ORIENTED_EDGE('',*,*,#6190,.T.);+#6190=EDGE_CURVE('',#6187,#6191,#3788,.T.);+#6191=VERTEX_POINT('',#6192);+#6192=CARTESIAN_POINT('',(-3.22,-6.925,0.85));+#6193=ORIENTED_EDGE('',*,*,#6194,.T.);+#6194=EDGE_CURVE('',#6191,#6195,#3788,.T.);+#6195=VERTEX_POINT('',#6196);+#6196=CARTESIAN_POINT('',(-3.78,-6.925,0.85));+#6197=ORIENTED_EDGE('',*,*,#6198,.T.);+#6198=EDGE_CURVE('',#6195,#6199,#3788,.T.);+#6199=VERTEX_POINT('',#6200);+#6200=CARTESIAN_POINT('',(-4.22,-6.925,0.85));+#6201=ORIENTED_EDGE('',*,*,#6202,.T.);+#6202=EDGE_CURVE('',#6199,#6203,#3788,.T.);+#6203=VERTEX_POINT('',#6204);+#6204=CARTESIAN_POINT('',(-4.78,-6.925,0.85));+#6205=ORIENTED_EDGE('',*,*,#6206,.T.);+#6206=EDGE_CURVE('',#6203,#6207,#3788,.T.);+#6207=VERTEX_POINT('',#6208);+#6208=CARTESIAN_POINT('',(-5.22,-6.925,0.85));+#6209=ORIENTED_EDGE('',*,*,#6210,.T.);+#6210=EDGE_CURVE('',#6207,#6211,#3788,.T.);+#6211=VERTEX_POINT('',#6212);+#6212=CARTESIAN_POINT('',(-5.78,-6.925,0.85));+#6213=ORIENTED_EDGE('',*,*,#6214,.T.);+#6214=EDGE_CURVE('',#6211,#4220,#3788,.T.);+#6215=ORIENTED_EDGE('',*,*,#4219,.T.);+#6216=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#3293,#3297),(#4214,#4644)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#6217=ADVANCED_FACE('',(#6218),#3262,.F.);+#6218=FACE_BOUND('',#6219,.F.);+#6219=EDGE_LOOP('',(#5907,#6220,#6221,#6225));+#6220=ORIENTED_EDGE('',*,*,#6093,.T.);+#6221=ORIENTED_EDGE('',*,*,#6222,.T.);+#6222=EDGE_CURVE('',#6090,#3346,#6223,.T.);+#6223=LINE('',#6224,#1074);+#6224=CARTESIAN_POINT('',(7.,5.22,0.630119079428));+#6225=ORIENTED_EDGE('',*,*,#3345,.F.);+#6226=ADVANCED_FACE('',(#6227),#6286,.F.);+#6227=FACE_BOUND('',#6228,.F.);+#6228=EDGE_LOOP('',(#6229,#6230,#6236,#6243,#6248,#6255,#6260,#6265,#6270,#6276,#6281,#6285));+#6229=ORIENTED_EDGE('',*,*,#6222,.F.);+#6230=ORIENTED_EDGE('',*,*,#6231,.T.);+#6231=EDGE_CURVE('',#6090,#6232,#6234,.T.);+#6232=VERTEX_POINT('',#6233);+#6233=CARTESIAN_POINT('',(7.2,5.22,0.75));+#6234=LINE('',#6235,#49);+#6235=CARTESIAN_POINT('',(6.85,5.22,0.75));+#6236=ORIENTED_EDGE('',*,*,#6237,.T.);+#6237=EDGE_CURVE('',#6232,#6238,#6240,.T.);+#6238=VERTEX_POINT('',#6239);+#6239=CARTESIAN_POINT('',(7.298480775301,5.22,0.667364817767));+#6240=CIRCLE('',#6241,0.1);+#6241=AXIS2_PLACEMENT_3D('',#6242,#270,#5850);+#6242=CARTESIAN_POINT('',(7.2,5.22,0.65));+#6243=ORIENTED_EDGE('',*,*,#6244,.T.);+#6244=EDGE_CURVE('',#6238,#6245,#6247,.T.);+#6245=VERTEX_POINT('',#6246);+#6246=CARTESIAN_POINT('',(7.382385590716,5.22,0.165270364467));+#6247=LINE('',#6239,#5856);+#6248=ORIENTED_EDGE('',*,*,#6249,.T.);+#6249=EDGE_CURVE('',#6245,#6250,#6252,.T.);+#6250=VERTEX_POINT('',#6251);+#6251=CARTESIAN_POINT('',(7.579347141319,5.22,1.387778780781E-16));+#6252=CIRCLE('',#6253,0.2);+#6253=AXIS2_PLACEMENT_3D('',#6254,#752,#5865);+#6254=CARTESIAN_POINT('',(7.579347141319,5.22,0.2));+#6255=ORIENTED_EDGE('',*,*,#6256,.T.);+#6256=EDGE_CURVE('',#6250,#6257,#6259,.T.);+#6257=VERTEX_POINT('',#6258);+#6258=CARTESIAN_POINT('',(8.,5.22,1.387778780781E-16));+#6259=LINE('',#6251,#49);+#6260=ORIENTED_EDGE('',*,*,#6261,.T.);+#6261=EDGE_CURVE('',#6257,#6262,#6264,.T.);+#6262=VERTEX_POINT('',#6263);+#6263=CARTESIAN_POINT('',(8.,5.22,0.1));+#6264=LINE('',#6258,#1074);+#6265=ORIENTED_EDGE('',*,*,#6266,.T.);+#6266=EDGE_CURVE('',#6262,#6267,#6269,.T.);+#6267=VERTEX_POINT('',#6268);+#6268=CARTESIAN_POINT('',(7.579347141319,5.22,0.1));+#6269=LINE('',#6263,#759);+#6270=ORIENTED_EDGE('',*,*,#6271,.T.);+#6271=EDGE_CURVE('',#6267,#6272,#6274,.T.);+#6272=VERTEX_POINT('',#6273);+#6273=CARTESIAN_POINT('',(7.480866366018,5.22,0.182635182233));+#6274=CIRCLE('',#6275,1.E-01);+#6275=AXIS2_PLACEMENT_3D('',#6254,#270,#5887);+#6276=ORIENTED_EDGE('',*,*,#6277,.T.);+#6277=EDGE_CURVE('',#6272,#6278,#6280,.T.);+#6278=VERTEX_POINT('',#6279);+#6279=CARTESIAN_POINT('',(7.396961550602,5.22,0.684729635533));+#6280=LINE('',#6273,#5893);+#6281=ORIENTED_EDGE('',*,*,#6282,.T.);+#6282=EDGE_CURVE('',#6278,#3358,#6283,.T.);+#6283=CIRCLE('',#6284,0.2);+#6284=AXIS2_PLACEMENT_3D('',#6242,#752,#5899);+#6285=ORIENTED_EDGE('',*,*,#3357,.T.);+#6286=PLANE('',#6287);+#6287=AXIS2_PLACEMENT_3D('',#6288,#752,#13);+#6288=CARTESIAN_POINT('',(7.414276639233,5.22,0.410238158856));+#6289=ADVANCED_FACE('',(#6290),#6351,.T.);+#6290=FACE_BOUND('',#6291,.T.);+#6291=EDGE_LOOP('',(#6292,#6296,#6302,#6309,#6314,#6321,#6326,#6331,#6336,#6342,#6347,#3364));+#6292=ORIENTED_EDGE('',*,*,#6293,.F.);+#6293=EDGE_CURVE('',#6086,#3366,#6294,.T.);+#6294=LINE('',#6295,#1074);+#6295=CARTESIAN_POINT('',(7.,4.78,0.630119079428));+#6296=ORIENTED_EDGE('',*,*,#6297,.T.);+#6297=EDGE_CURVE('',#6086,#6298,#6300,.T.);+#6298=VERTEX_POINT('',#6299);+#6299=CARTESIAN_POINT('',(7.2,4.78,0.75));+#6300=LINE('',#6301,#49);+#6301=CARTESIAN_POINT('',(6.85,4.78,0.75));+#6302=ORIENTED_EDGE('',*,*,#6303,.T.);+#6303=EDGE_CURVE('',#6298,#6304,#6306,.T.);+#6304=VERTEX_POINT('',#6305);+#6305=CARTESIAN_POINT('',(7.298480775301,4.78,0.667364817767));+#6306=CIRCLE('',#6307,0.1);+#6307=AXIS2_PLACEMENT_3D('',#6308,#270,#5850);+#6308=CARTESIAN_POINT('',(7.2,4.78,0.65));+#6309=ORIENTED_EDGE('',*,*,#6310,.T.);+#6310=EDGE_CURVE('',#6304,#6311,#6313,.T.);+#6311=VERTEX_POINT('',#6312);+#6312=CARTESIAN_POINT('',(7.382385590716,4.78,0.165270364467));+#6313=LINE('',#6305,#5856);+#6314=ORIENTED_EDGE('',*,*,#6315,.T.);+#6315=EDGE_CURVE('',#6311,#6316,#6318,.T.);+#6316=VERTEX_POINT('',#6317);+#6317=CARTESIAN_POINT('',(7.579347141319,4.78,1.387778780781E-16));+#6318=CIRCLE('',#6319,0.2);+#6319=AXIS2_PLACEMENT_3D('',#6320,#752,#5865);+#6320=CARTESIAN_POINT('',(7.579347141319,4.78,0.2));+#6321=ORIENTED_EDGE('',*,*,#6322,.T.);+#6322=EDGE_CURVE('',#6316,#6323,#6325,.T.);+#6323=VERTEX_POINT('',#6324);+#6324=CARTESIAN_POINT('',(8.,4.78,1.387778780781E-16));+#6325=LINE('',#6317,#49);+#6326=ORIENTED_EDGE('',*,*,#6327,.T.);+#6327=EDGE_CURVE('',#6323,#6328,#6330,.T.);+#6328=VERTEX_POINT('',#6329);+#6329=CARTESIAN_POINT('',(8.,4.78,0.1));+#6330=LINE('',#6324,#1074);+#6331=ORIENTED_EDGE('',*,*,#6332,.T.);+#6332=EDGE_CURVE('',#6328,#6333,#6335,.T.);+#6333=VERTEX_POINT('',#6334);+#6334=CARTESIAN_POINT('',(7.579347141319,4.78,0.1));+#6335=LINE('',#6329,#759);+#6336=ORIENTED_EDGE('',*,*,#6337,.T.);+#6337=EDGE_CURVE('',#6333,#6338,#6340,.T.);+#6338=VERTEX_POINT('',#6339);+#6339=CARTESIAN_POINT('',(7.480866366018,4.78,0.182635182233));+#6340=CIRCLE('',#6341,1.E-01);+#6341=AXIS2_PLACEMENT_3D('',#6320,#270,#5887);+#6342=ORIENTED_EDGE('',*,*,#6343,.T.);+#6343=EDGE_CURVE('',#6338,#6344,#6346,.T.);+#6344=VERTEX_POINT('',#6345);+#6345=CARTESIAN_POINT('',(7.396961550602,4.78,0.684729635533));+#6346=LINE('',#6339,#5893);+#6347=ORIENTED_EDGE('',*,*,#6348,.T.);+#6348=EDGE_CURVE('',#6344,#3361,#6349,.T.);+#6349=CIRCLE('',#6350,0.2);+#6350=AXIS2_PLACEMENT_3D('',#6308,#752,#5899);+#6351=PLANE('',#6352);+#6352=AXIS2_PLACEMENT_3D('',#6353,#752,#13);+#6353=CARTESIAN_POINT('',(7.414276639233,4.78,0.410238158856));+#6354=ADVANCED_FACE('',(#6355),#6362,.T.);+#6355=FACE_BOUND('',#6356,.F.);+#6356=EDGE_LOOP('',(#6357,#6347,#6360,#6361));+#6357=ORIENTED_EDGE('',*,*,#6358,.T.);+#6358=EDGE_CURVE('',#6278,#6344,#6359,.T.);+#6359=LINE('',#6279,#751);+#6360=ORIENTED_EDGE('',*,*,#3360,.F.);+#6361=ORIENTED_EDGE('',*,*,#6282,.F.);+#6362=CYLINDRICAL_SURFACE('',#6363,0.2);+#6363=AXIS2_PLACEMENT_3D('',#6242,#270,#5899);+#6364=ADVANCED_FACE('',(#6365),#3262,.F.);+#6365=FACE_BOUND('',#6366,.F.);+#6366=EDGE_LOOP('',(#6292,#6367,#6368,#6372));+#6367=ORIENTED_EDGE('',*,*,#6085,.T.);+#6368=ORIENTED_EDGE('',*,*,#6369,.T.);+#6369=EDGE_CURVE('',#6082,#3381,#6370,.T.);+#6370=LINE('',#6371,#1074);+#6371=CARTESIAN_POINT('',(7.,4.22,0.630119079428));+#6372=ORIENTED_EDGE('',*,*,#3380,.F.);+#6373=ADVANCED_FACE('',(#6374),#6433,.F.);+#6374=FACE_BOUND('',#6375,.F.);+#6375=EDGE_LOOP('',(#6376,#6377,#6383,#6390,#6395,#6402,#6407,#6412,#6417,#6423,#6428,#6432));+#6376=ORIENTED_EDGE('',*,*,#6369,.F.);+#6377=ORIENTED_EDGE('',*,*,#6378,.T.);+#6378=EDGE_CURVE('',#6082,#6379,#6381,.T.);+#6379=VERTEX_POINT('',#6380);+#6380=CARTESIAN_POINT('',(7.2,4.22,0.75));+#6381=LINE('',#6382,#49);+#6382=CARTESIAN_POINT('',(6.85,4.22,0.75));+#6383=ORIENTED_EDGE('',*,*,#6384,.T.);+#6384=EDGE_CURVE('',#6379,#6385,#6387,.T.);+#6385=VERTEX_POINT('',#6386);+#6386=CARTESIAN_POINT('',(7.298480775301,4.22,0.667364817767));+#6387=CIRCLE('',#6388,0.1);+#6388=AXIS2_PLACEMENT_3D('',#6389,#270,#5850);+#6389=CARTESIAN_POINT('',(7.2,4.22,0.65));+#6390=ORIENTED_EDGE('',*,*,#6391,.T.);+#6391=EDGE_CURVE('',#6385,#6392,#6394,.T.);+#6392=VERTEX_POINT('',#6393);+#6393=CARTESIAN_POINT('',(7.382385590716,4.22,0.165270364467));+#6394=LINE('',#6386,#5856);+#6395=ORIENTED_EDGE('',*,*,#6396,.T.);+#6396=EDGE_CURVE('',#6392,#6397,#6399,.T.);+#6397=VERTEX_POINT('',#6398);+#6398=CARTESIAN_POINT('',(7.579347141319,4.22,1.387778780781E-16));+#6399=CIRCLE('',#6400,0.2);+#6400=AXIS2_PLACEMENT_3D('',#6401,#752,#5865);+#6401=CARTESIAN_POINT('',(7.579347141319,4.22,0.2));+#6402=ORIENTED_EDGE('',*,*,#6403,.T.);+#6403=EDGE_CURVE('',#6397,#6404,#6406,.T.);+#6404=VERTEX_POINT('',#6405);+#6405=CARTESIAN_POINT('',(8.,4.22,1.387778780781E-16));+#6406=LINE('',#6398,#49);+#6407=ORIENTED_EDGE('',*,*,#6408,.T.);+#6408=EDGE_CURVE('',#6404,#6409,#6411,.T.);+#6409=VERTEX_POINT('',#6410);+#6410=CARTESIAN_POINT('',(8.,4.22,0.1));+#6411=LINE('',#6405,#1074);+#6412=ORIENTED_EDGE('',*,*,#6413,.T.);+#6413=EDGE_CURVE('',#6409,#6414,#6416,.T.);+#6414=VERTEX_POINT('',#6415);+#6415=CARTESIAN_POINT('',(7.579347141319,4.22,0.1));+#6416=LINE('',#6410,#759);+#6417=ORIENTED_EDGE('',*,*,#6418,.T.);+#6418=EDGE_CURVE('',#6414,#6419,#6421,.T.);+#6419=VERTEX_POINT('',#6420);+#6420=CARTESIAN_POINT('',(7.480866366018,4.22,0.182635182233));+#6421=CIRCLE('',#6422,1.E-01);+#6422=AXIS2_PLACEMENT_3D('',#6401,#270,#5887);+#6423=ORIENTED_EDGE('',*,*,#6424,.T.);+#6424=EDGE_CURVE('',#6419,#6425,#6427,.T.);+#6425=VERTEX_POINT('',#6426);+#6426=CARTESIAN_POINT('',(7.396961550602,4.22,0.684729635533));+#6427=LINE('',#6420,#5893);+#6428=ORIENTED_EDGE('',*,*,#6429,.T.);+#6429=EDGE_CURVE('',#6425,#3393,#6430,.T.);+#6430=CIRCLE('',#6431,0.2);+#6431=AXIS2_PLACEMENT_3D('',#6389,#752,#5899);+#6432=ORIENTED_EDGE('',*,*,#3392,.T.);+#6433=PLANE('',#6434);+#6434=AXIS2_PLACEMENT_3D('',#6435,#752,#13);+#6435=CARTESIAN_POINT('',(7.414276639233,4.22,0.410238158856));+#6436=ADVANCED_FACE('',(#6437),#6498,.T.);+#6437=FACE_BOUND('',#6438,.T.);+#6438=EDGE_LOOP('',(#6439,#6443,#6449,#6456,#6461,#6468,#6473,#6478,#6483,#6489,#6494,#3399));+#6439=ORIENTED_EDGE('',*,*,#6440,.F.);+#6440=EDGE_CURVE('',#6078,#3401,#6441,.T.);+#6441=LINE('',#6442,#1074);+#6442=CARTESIAN_POINT('',(7.,3.78,0.630119079428));+#6443=ORIENTED_EDGE('',*,*,#6444,.T.);+#6444=EDGE_CURVE('',#6078,#6445,#6447,.T.);+#6445=VERTEX_POINT('',#6446);+#6446=CARTESIAN_POINT('',(7.2,3.78,0.75));+#6447=LINE('',#6448,#49);+#6448=CARTESIAN_POINT('',(6.85,3.78,0.75));+#6449=ORIENTED_EDGE('',*,*,#6450,.T.);+#6450=EDGE_CURVE('',#6445,#6451,#6453,.T.);+#6451=VERTEX_POINT('',#6452);+#6452=CARTESIAN_POINT('',(7.298480775301,3.78,0.667364817767));+#6453=CIRCLE('',#6454,0.1);+#6454=AXIS2_PLACEMENT_3D('',#6455,#270,#5850);+#6455=CARTESIAN_POINT('',(7.2,3.78,0.65));+#6456=ORIENTED_EDGE('',*,*,#6457,.T.);+#6457=EDGE_CURVE('',#6451,#6458,#6460,.T.);+#6458=VERTEX_POINT('',#6459);+#6459=CARTESIAN_POINT('',(7.382385590716,3.78,0.165270364467));+#6460=LINE('',#6452,#5856);+#6461=ORIENTED_EDGE('',*,*,#6462,.T.);+#6462=EDGE_CURVE('',#6458,#6463,#6465,.T.);+#6463=VERTEX_POINT('',#6464);+#6464=CARTESIAN_POINT('',(7.579347141319,3.78,1.387778780781E-16));+#6465=CIRCLE('',#6466,0.2);+#6466=AXIS2_PLACEMENT_3D('',#6467,#752,#5865);+#6467=CARTESIAN_POINT('',(7.579347141319,3.78,0.2));+#6468=ORIENTED_EDGE('',*,*,#6469,.T.);+#6469=EDGE_CURVE('',#6463,#6470,#6472,.T.);+#6470=VERTEX_POINT('',#6471);+#6471=CARTESIAN_POINT('',(8.,3.78,1.387778780781E-16));+#6472=LINE('',#6464,#49);+#6473=ORIENTED_EDGE('',*,*,#6474,.T.);+#6474=EDGE_CURVE('',#6470,#6475,#6477,.T.);+#6475=VERTEX_POINT('',#6476);+#6476=CARTESIAN_POINT('',(8.,3.78,0.1));+#6477=LINE('',#6471,#1074);+#6478=ORIENTED_EDGE('',*,*,#6479,.T.);+#6479=EDGE_CURVE('',#6475,#6480,#6482,.T.);+#6480=VERTEX_POINT('',#6481);+#6481=CARTESIAN_POINT('',(7.579347141319,3.78,0.1));+#6482=LINE('',#6476,#759);+#6483=ORIENTED_EDGE('',*,*,#6484,.T.);+#6484=EDGE_CURVE('',#6480,#6485,#6487,.T.);+#6485=VERTEX_POINT('',#6486);+#6486=CARTESIAN_POINT('',(7.480866366018,3.78,0.182635182233));+#6487=CIRCLE('',#6488,1.E-01);+#6488=AXIS2_PLACEMENT_3D('',#6467,#270,#5887);+#6489=ORIENTED_EDGE('',*,*,#6490,.T.);+#6490=EDGE_CURVE('',#6485,#6491,#6493,.T.);+#6491=VERTEX_POINT('',#6492);+#6492=CARTESIAN_POINT('',(7.396961550602,3.78,0.684729635533));+#6493=LINE('',#6486,#5893);+#6494=ORIENTED_EDGE('',*,*,#6495,.T.);+#6495=EDGE_CURVE('',#6491,#3396,#6496,.T.);+#6496=CIRCLE('',#6497,0.2);+#6497=AXIS2_PLACEMENT_3D('',#6455,#752,#5899);+#6498=PLANE('',#6499);+#6499=AXIS2_PLACEMENT_3D('',#6500,#752,#13);+#6500=CARTESIAN_POINT('',(7.414276639233,3.78,0.410238158856));+#6501=ADVANCED_FACE('',(#6502),#6509,.T.);+#6502=FACE_BOUND('',#6503,.F.);+#6503=EDGE_LOOP('',(#6504,#6494,#6507,#6508));+#6504=ORIENTED_EDGE('',*,*,#6505,.T.);+#6505=EDGE_CURVE('',#6425,#6491,#6506,.T.);+#6506=LINE('',#6426,#751);+#6507=ORIENTED_EDGE('',*,*,#3395,.F.);+#6508=ORIENTED_EDGE('',*,*,#6429,.F.);+#6509=CYLINDRICAL_SURFACE('',#6510,0.2);+#6510=AXIS2_PLACEMENT_3D('',#6389,#270,#5899);+#6511=ADVANCED_FACE('',(#6512),#3262,.F.);+#6512=FACE_BOUND('',#6513,.F.);+#6513=EDGE_LOOP('',(#6439,#6514,#6515,#6519));+#6514=ORIENTED_EDGE('',*,*,#6077,.T.);+#6515=ORIENTED_EDGE('',*,*,#6516,.T.);+#6516=EDGE_CURVE('',#6074,#3416,#6517,.T.);+#6517=LINE('',#6518,#1074);+#6518=CARTESIAN_POINT('',(7.,3.22,0.630119079428));+#6519=ORIENTED_EDGE('',*,*,#3415,.F.);+#6520=ADVANCED_FACE('',(#6521),#6580,.F.);+#6521=FACE_BOUND('',#6522,.F.);+#6522=EDGE_LOOP('',(#6523,#6524,#6530,#6537,#6542,#6549,#6554,#6559,#6564,#6570,#6575,#6579));+#6523=ORIENTED_EDGE('',*,*,#6516,.F.);+#6524=ORIENTED_EDGE('',*,*,#6525,.T.);+#6525=EDGE_CURVE('',#6074,#6526,#6528,.T.);+#6526=VERTEX_POINT('',#6527);+#6527=CARTESIAN_POINT('',(7.2,3.22,0.75));+#6528=LINE('',#6529,#49);+#6529=CARTESIAN_POINT('',(6.85,3.22,0.75));+#6530=ORIENTED_EDGE('',*,*,#6531,.T.);+#6531=EDGE_CURVE('',#6526,#6532,#6534,.T.);+#6532=VERTEX_POINT('',#6533);+#6533=CARTESIAN_POINT('',(7.298480775301,3.22,0.667364817767));+#6534=CIRCLE('',#6535,0.1);+#6535=AXIS2_PLACEMENT_3D('',#6536,#270,#5850);+#6536=CARTESIAN_POINT('',(7.2,3.22,0.65));+#6537=ORIENTED_EDGE('',*,*,#6538,.T.);+#6538=EDGE_CURVE('',#6532,#6539,#6541,.T.);+#6539=VERTEX_POINT('',#6540);+#6540=CARTESIAN_POINT('',(7.382385590716,3.22,0.165270364467));+#6541=LINE('',#6533,#5856);+#6542=ORIENTED_EDGE('',*,*,#6543,.T.);+#6543=EDGE_CURVE('',#6539,#6544,#6546,.T.);+#6544=VERTEX_POINT('',#6545);+#6545=CARTESIAN_POINT('',(7.579347141319,3.22,1.387778780781E-16));+#6546=CIRCLE('',#6547,0.2);+#6547=AXIS2_PLACEMENT_3D('',#6548,#752,#5865);+#6548=CARTESIAN_POINT('',(7.579347141319,3.22,0.2));+#6549=ORIENTED_EDGE('',*,*,#6550,.T.);+#6550=EDGE_CURVE('',#6544,#6551,#6553,.T.);+#6551=VERTEX_POINT('',#6552);+#6552=CARTESIAN_POINT('',(8.,3.22,1.387778780781E-16));+#6553=LINE('',#6545,#49);+#6554=ORIENTED_EDGE('',*,*,#6555,.T.);+#6555=EDGE_CURVE('',#6551,#6556,#6558,.T.);+#6556=VERTEX_POINT('',#6557);+#6557=CARTESIAN_POINT('',(8.,3.22,0.1));+#6558=LINE('',#6552,#1074);+#6559=ORIENTED_EDGE('',*,*,#6560,.T.);+#6560=EDGE_CURVE('',#6556,#6561,#6563,.T.);+#6561=VERTEX_POINT('',#6562);+#6562=CARTESIAN_POINT('',(7.579347141319,3.22,0.1));+#6563=LINE('',#6557,#759);+#6564=ORIENTED_EDGE('',*,*,#6565,.T.);+#6565=EDGE_CURVE('',#6561,#6566,#6568,.T.);+#6566=VERTEX_POINT('',#6567);+#6567=CARTESIAN_POINT('',(7.480866366018,3.22,0.182635182233));+#6568=CIRCLE('',#6569,1.E-01);+#6569=AXIS2_PLACEMENT_3D('',#6548,#270,#5887);+#6570=ORIENTED_EDGE('',*,*,#6571,.T.);+#6571=EDGE_CURVE('',#6566,#6572,#6574,.T.);+#6572=VERTEX_POINT('',#6573);+#6573=CARTESIAN_POINT('',(7.396961550602,3.22,0.684729635533));+#6574=LINE('',#6567,#5893);+#6575=ORIENTED_EDGE('',*,*,#6576,.T.);+#6576=EDGE_CURVE('',#6572,#3428,#6577,.T.);+#6577=CIRCLE('',#6578,0.2);+#6578=AXIS2_PLACEMENT_3D('',#6536,#752,#5899);+#6579=ORIENTED_EDGE('',*,*,#3427,.T.);+#6580=PLANE('',#6581);+#6581=AXIS2_PLACEMENT_3D('',#6582,#752,#13);+#6582=CARTESIAN_POINT('',(7.414276639233,3.22,0.410238158856));+#6583=ADVANCED_FACE('',(#6584),#6645,.T.);+#6584=FACE_BOUND('',#6585,.T.);+#6585=EDGE_LOOP('',(#6586,#6590,#6596,#6603,#6608,#6615,#6620,#6625,#6630,#6636,#6641,#3434));+#6586=ORIENTED_EDGE('',*,*,#6587,.F.);+#6587=EDGE_CURVE('',#6070,#3436,#6588,.T.);+#6588=LINE('',#6589,#1074);+#6589=CARTESIAN_POINT('',(7.,2.78,0.630119079428));+#6590=ORIENTED_EDGE('',*,*,#6591,.T.);+#6591=EDGE_CURVE('',#6070,#6592,#6594,.T.);+#6592=VERTEX_POINT('',#6593);+#6593=CARTESIAN_POINT('',(7.2,2.78,0.75));+#6594=LINE('',#6595,#49);+#6595=CARTESIAN_POINT('',(6.85,2.78,0.75));+#6596=ORIENTED_EDGE('',*,*,#6597,.T.);+#6597=EDGE_CURVE('',#6592,#6598,#6600,.T.);+#6598=VERTEX_POINT('',#6599);+#6599=CARTESIAN_POINT('',(7.298480775301,2.78,0.667364817767));+#6600=CIRCLE('',#6601,0.1);+#6601=AXIS2_PLACEMENT_3D('',#6602,#270,#5850);+#6602=CARTESIAN_POINT('',(7.2,2.78,0.65));+#6603=ORIENTED_EDGE('',*,*,#6604,.T.);+#6604=EDGE_CURVE('',#6598,#6605,#6607,.T.);+#6605=VERTEX_POINT('',#6606);+#6606=CARTESIAN_POINT('',(7.382385590716,2.78,0.165270364467));+#6607=LINE('',#6599,#5856);+#6608=ORIENTED_EDGE('',*,*,#6609,.T.);+#6609=EDGE_CURVE('',#6605,#6610,#6612,.T.);+#6610=VERTEX_POINT('',#6611);+#6611=CARTESIAN_POINT('',(7.579347141319,2.78,1.387778780781E-16));+#6612=CIRCLE('',#6613,0.2);+#6613=AXIS2_PLACEMENT_3D('',#6614,#752,#5865);+#6614=CARTESIAN_POINT('',(7.579347141319,2.78,0.2));+#6615=ORIENTED_EDGE('',*,*,#6616,.T.);+#6616=EDGE_CURVE('',#6610,#6617,#6619,.T.);+#6617=VERTEX_POINT('',#6618);+#6618=CARTESIAN_POINT('',(8.,2.78,1.387778780781E-16));+#6619=LINE('',#6611,#49);+#6620=ORIENTED_EDGE('',*,*,#6621,.T.);+#6621=EDGE_CURVE('',#6617,#6622,#6624,.T.);+#6622=VERTEX_POINT('',#6623);+#6623=CARTESIAN_POINT('',(8.,2.78,0.1));+#6624=LINE('',#6618,#1074);+#6625=ORIENTED_EDGE('',*,*,#6626,.T.);+#6626=EDGE_CURVE('',#6622,#6627,#6629,.T.);+#6627=VERTEX_POINT('',#6628);+#6628=CARTESIAN_POINT('',(7.579347141319,2.78,0.1));+#6629=LINE('',#6623,#759);+#6630=ORIENTED_EDGE('',*,*,#6631,.T.);+#6631=EDGE_CURVE('',#6627,#6632,#6634,.T.);+#6632=VERTEX_POINT('',#6633);+#6633=CARTESIAN_POINT('',(7.480866366018,2.78,0.182635182233));+#6634=CIRCLE('',#6635,1.E-01);+#6635=AXIS2_PLACEMENT_3D('',#6614,#270,#5887);+#6636=ORIENTED_EDGE('',*,*,#6637,.T.);+#6637=EDGE_CURVE('',#6632,#6638,#6640,.T.);+#6638=VERTEX_POINT('',#6639);+#6639=CARTESIAN_POINT('',(7.396961550602,2.78,0.684729635533));+#6640=LINE('',#6633,#5893);+#6641=ORIENTED_EDGE('',*,*,#6642,.T.);+#6642=EDGE_CURVE('',#6638,#3431,#6643,.T.);+#6643=CIRCLE('',#6644,0.2);+#6644=AXIS2_PLACEMENT_3D('',#6602,#752,#5899);+#6645=PLANE('',#6646);+#6646=AXIS2_PLACEMENT_3D('',#6647,#752,#13);+#6647=CARTESIAN_POINT('',(7.414276639233,2.78,0.410238158856));+#6648=ADVANCED_FACE('',(#6649),#6656,.T.);+#6649=FACE_BOUND('',#6650,.F.);+#6650=EDGE_LOOP('',(#6651,#6641,#6654,#6655));+#6651=ORIENTED_EDGE('',*,*,#6652,.T.);+#6652=EDGE_CURVE('',#6572,#6638,#6653,.T.);+#6653=LINE('',#6573,#751);+#6654=ORIENTED_EDGE('',*,*,#3430,.F.);+#6655=ORIENTED_EDGE('',*,*,#6576,.F.);+#6656=CYLINDRICAL_SURFACE('',#6657,0.2);+#6657=AXIS2_PLACEMENT_3D('',#6536,#270,#5899);+#6658=ADVANCED_FACE('',(#6659),#3262,.F.);+#6659=FACE_BOUND('',#6660,.F.);+#6660=EDGE_LOOP('',(#6586,#6661,#6662,#6666));+#6661=ORIENTED_EDGE('',*,*,#6069,.T.);+#6662=ORIENTED_EDGE('',*,*,#6663,.T.);+#6663=EDGE_CURVE('',#6066,#3451,#6664,.T.);+#6664=LINE('',#6665,#1074);+#6665=CARTESIAN_POINT('',(7.,2.22,0.630119079428));+#6666=ORIENTED_EDGE('',*,*,#3450,.F.);+#6667=ADVANCED_FACE('',(#6668),#6727,.F.);+#6668=FACE_BOUND('',#6669,.F.);+#6669=EDGE_LOOP('',(#6670,#6671,#6677,#6684,#6689,#6696,#6701,#6706,#6711,#6717,#6722,#6726));+#6670=ORIENTED_EDGE('',*,*,#6663,.F.);+#6671=ORIENTED_EDGE('',*,*,#6672,.T.);+#6672=EDGE_CURVE('',#6066,#6673,#6675,.T.);+#6673=VERTEX_POINT('',#6674);+#6674=CARTESIAN_POINT('',(7.2,2.22,0.75));+#6675=LINE('',#6676,#49);+#6676=CARTESIAN_POINT('',(6.85,2.22,0.75));+#6677=ORIENTED_EDGE('',*,*,#6678,.T.);+#6678=EDGE_CURVE('',#6673,#6679,#6681,.T.);+#6679=VERTEX_POINT('',#6680);+#6680=CARTESIAN_POINT('',(7.298480775301,2.22,0.667364817767));+#6681=CIRCLE('',#6682,0.1);+#6682=AXIS2_PLACEMENT_3D('',#6683,#270,#5850);+#6683=CARTESIAN_POINT('',(7.2,2.22,0.65));+#6684=ORIENTED_EDGE('',*,*,#6685,.T.);+#6685=EDGE_CURVE('',#6679,#6686,#6688,.T.);+#6686=VERTEX_POINT('',#6687);+#6687=CARTESIAN_POINT('',(7.382385590716,2.22,0.165270364467));+#6688=LINE('',#6680,#5856);+#6689=ORIENTED_EDGE('',*,*,#6690,.T.);+#6690=EDGE_CURVE('',#6686,#6691,#6693,.T.);+#6691=VERTEX_POINT('',#6692);+#6692=CARTESIAN_POINT('',(7.579347141319,2.22,1.387778780781E-16));+#6693=CIRCLE('',#6694,0.2);+#6694=AXIS2_PLACEMENT_3D('',#6695,#752,#5865);+#6695=CARTESIAN_POINT('',(7.579347141319,2.22,0.2));+#6696=ORIENTED_EDGE('',*,*,#6697,.T.);+#6697=EDGE_CURVE('',#6691,#6698,#6700,.T.);+#6698=VERTEX_POINT('',#6699);+#6699=CARTESIAN_POINT('',(8.,2.22,1.387778780781E-16));+#6700=LINE('',#6692,#49);+#6701=ORIENTED_EDGE('',*,*,#6702,.T.);+#6702=EDGE_CURVE('',#6698,#6703,#6705,.T.);+#6703=VERTEX_POINT('',#6704);+#6704=CARTESIAN_POINT('',(8.,2.22,0.1));+#6705=LINE('',#6699,#1074);+#6706=ORIENTED_EDGE('',*,*,#6707,.T.);+#6707=EDGE_CURVE('',#6703,#6708,#6710,.T.);+#6708=VERTEX_POINT('',#6709);+#6709=CARTESIAN_POINT('',(7.579347141319,2.22,0.1));+#6710=LINE('',#6704,#759);+#6711=ORIENTED_EDGE('',*,*,#6712,.T.);+#6712=EDGE_CURVE('',#6708,#6713,#6715,.T.);+#6713=VERTEX_POINT('',#6714);+#6714=CARTESIAN_POINT('',(7.480866366018,2.22,0.182635182233));+#6715=CIRCLE('',#6716,1.E-01);+#6716=AXIS2_PLACEMENT_3D('',#6695,#270,#5887);+#6717=ORIENTED_EDGE('',*,*,#6718,.T.);+#6718=EDGE_CURVE('',#6713,#6719,#6721,.T.);+#6719=VERTEX_POINT('',#6720);+#6720=CARTESIAN_POINT('',(7.396961550602,2.22,0.684729635533));+#6721=LINE('',#6714,#5893);+#6722=ORIENTED_EDGE('',*,*,#6723,.T.);+#6723=EDGE_CURVE('',#6719,#3463,#6724,.T.);+#6724=CIRCLE('',#6725,0.2);+#6725=AXIS2_PLACEMENT_3D('',#6683,#752,#5899);+#6726=ORIENTED_EDGE('',*,*,#3462,.T.);+#6727=PLANE('',#6728);+#6728=AXIS2_PLACEMENT_3D('',#6729,#752,#13);+#6729=CARTESIAN_POINT('',(7.414276639233,2.22,0.410238158856));+#6730=ADVANCED_FACE('',(#6731),#6792,.T.);+#6731=FACE_BOUND('',#6732,.T.);+#6732=EDGE_LOOP('',(#6733,#6737,#6743,#6750,#6755,#6762,#6767,#6772,#6777,#6783,#6788,#3469));+#6733=ORIENTED_EDGE('',*,*,#6734,.F.);+#6734=EDGE_CURVE('',#6062,#3471,#6735,.T.);+#6735=LINE('',#6736,#1074);+#6736=CARTESIAN_POINT('',(7.,1.78,0.630119079428));+#6737=ORIENTED_EDGE('',*,*,#6738,.T.);+#6738=EDGE_CURVE('',#6062,#6739,#6741,.T.);+#6739=VERTEX_POINT('',#6740);+#6740=CARTESIAN_POINT('',(7.2,1.78,0.75));+#6741=LINE('',#6742,#49);+#6742=CARTESIAN_POINT('',(6.85,1.78,0.75));+#6743=ORIENTED_EDGE('',*,*,#6744,.T.);+#6744=EDGE_CURVE('',#6739,#6745,#6747,.T.);+#6745=VERTEX_POINT('',#6746);+#6746=CARTESIAN_POINT('',(7.298480775301,1.78,0.667364817767));+#6747=CIRCLE('',#6748,0.1);+#6748=AXIS2_PLACEMENT_3D('',#6749,#270,#5850);+#6749=CARTESIAN_POINT('',(7.2,1.78,0.65));+#6750=ORIENTED_EDGE('',*,*,#6751,.T.);+#6751=EDGE_CURVE('',#6745,#6752,#6754,.T.);+#6752=VERTEX_POINT('',#6753);+#6753=CARTESIAN_POINT('',(7.382385590716,1.78,0.165270364467));+#6754=LINE('',#6746,#5856);+#6755=ORIENTED_EDGE('',*,*,#6756,.T.);+#6756=EDGE_CURVE('',#6752,#6757,#6759,.T.);+#6757=VERTEX_POINT('',#6758);+#6758=CARTESIAN_POINT('',(7.579347141319,1.78,1.387778780781E-16));+#6759=CIRCLE('',#6760,0.2);+#6760=AXIS2_PLACEMENT_3D('',#6761,#752,#5865);+#6761=CARTESIAN_POINT('',(7.579347141319,1.78,0.2));+#6762=ORIENTED_EDGE('',*,*,#6763,.T.);+#6763=EDGE_CURVE('',#6757,#6764,#6766,.T.);+#6764=VERTEX_POINT('',#6765);+#6765=CARTESIAN_POINT('',(8.,1.78,1.387778780781E-16));+#6766=LINE('',#6758,#49);+#6767=ORIENTED_EDGE('',*,*,#6768,.T.);+#6768=EDGE_CURVE('',#6764,#6769,#6771,.T.);+#6769=VERTEX_POINT('',#6770);+#6770=CARTESIAN_POINT('',(8.,1.78,0.1));+#6771=LINE('',#6765,#1074);+#6772=ORIENTED_EDGE('',*,*,#6773,.T.);+#6773=EDGE_CURVE('',#6769,#6774,#6776,.T.);+#6774=VERTEX_POINT('',#6775);+#6775=CARTESIAN_POINT('',(7.579347141319,1.78,0.1));+#6776=LINE('',#6770,#759);+#6777=ORIENTED_EDGE('',*,*,#6778,.T.);+#6778=EDGE_CURVE('',#6774,#6779,#6781,.T.);+#6779=VERTEX_POINT('',#6780);+#6780=CARTESIAN_POINT('',(7.480866366018,1.78,0.182635182233));+#6781=CIRCLE('',#6782,1.E-01);+#6782=AXIS2_PLACEMENT_3D('',#6761,#270,#5887);+#6783=ORIENTED_EDGE('',*,*,#6784,.T.);+#6784=EDGE_CURVE('',#6779,#6785,#6787,.T.);+#6785=VERTEX_POINT('',#6786);+#6786=CARTESIAN_POINT('',(7.396961550602,1.78,0.684729635533));+#6787=LINE('',#6780,#5893);+#6788=ORIENTED_EDGE('',*,*,#6789,.T.);+#6789=EDGE_CURVE('',#6785,#3466,#6790,.T.);+#6790=CIRCLE('',#6791,0.2);+#6791=AXIS2_PLACEMENT_3D('',#6749,#752,#5899);+#6792=PLANE('',#6793);+#6793=AXIS2_PLACEMENT_3D('',#6794,#752,#13);+#6794=CARTESIAN_POINT('',(7.414276639233,1.78,0.410238158856));+#6795=ADVANCED_FACE('',(#6796),#6803,.T.);+#6796=FACE_BOUND('',#6797,.F.);+#6797=EDGE_LOOP('',(#6798,#6788,#6801,#6802));+#6798=ORIENTED_EDGE('',*,*,#6799,.T.);+#6799=EDGE_CURVE('',#6719,#6785,#6800,.T.);+#6800=LINE('',#6720,#751);+#6801=ORIENTED_EDGE('',*,*,#3465,.F.);+#6802=ORIENTED_EDGE('',*,*,#6723,.F.);+#6803=CYLINDRICAL_SURFACE('',#6804,0.2);+#6804=AXIS2_PLACEMENT_3D('',#6683,#270,#5899);+#6805=ADVANCED_FACE('',(#6806),#3262,.F.);+#6806=FACE_BOUND('',#6807,.F.);+#6807=EDGE_LOOP('',(#6733,#6808,#6809,#6813));+#6808=ORIENTED_EDGE('',*,*,#6061,.T.);+#6809=ORIENTED_EDGE('',*,*,#6810,.T.);+#6810=EDGE_CURVE('',#6058,#3486,#6811,.T.);+#6811=LINE('',#6812,#1074);+#6812=CARTESIAN_POINT('',(7.,1.22,0.630119079428));+#6813=ORIENTED_EDGE('',*,*,#3485,.F.);+#6814=ADVANCED_FACE('',(#6815),#6874,.F.);+#6815=FACE_BOUND('',#6816,.F.);+#6816=EDGE_LOOP('',(#6817,#6818,#6824,#6831,#6836,#6843,#6848,#6853,#6858,#6864,#6869,#6873));+#6817=ORIENTED_EDGE('',*,*,#6810,.F.);+#6818=ORIENTED_EDGE('',*,*,#6819,.T.);+#6819=EDGE_CURVE('',#6058,#6820,#6822,.T.);+#6820=VERTEX_POINT('',#6821);+#6821=CARTESIAN_POINT('',(7.2,1.22,0.75));+#6822=LINE('',#6823,#49);+#6823=CARTESIAN_POINT('',(6.85,1.22,0.75));+#6824=ORIENTED_EDGE('',*,*,#6825,.T.);+#6825=EDGE_CURVE('',#6820,#6826,#6828,.T.);+#6826=VERTEX_POINT('',#6827);+#6827=CARTESIAN_POINT('',(7.298480775301,1.22,0.667364817767));+#6828=CIRCLE('',#6829,0.1);+#6829=AXIS2_PLACEMENT_3D('',#6830,#270,#5850);+#6830=CARTESIAN_POINT('',(7.2,1.22,0.65));+#6831=ORIENTED_EDGE('',*,*,#6832,.T.);+#6832=EDGE_CURVE('',#6826,#6833,#6835,.T.);+#6833=VERTEX_POINT('',#6834);+#6834=CARTESIAN_POINT('',(7.382385590716,1.22,0.165270364467));+#6835=LINE('',#6827,#5856);+#6836=ORIENTED_EDGE('',*,*,#6837,.T.);+#6837=EDGE_CURVE('',#6833,#6838,#6840,.T.);+#6838=VERTEX_POINT('',#6839);+#6839=CARTESIAN_POINT('',(7.579347141319,1.22,1.387778780781E-16));+#6840=CIRCLE('',#6841,0.2);+#6841=AXIS2_PLACEMENT_3D('',#6842,#752,#5865);+#6842=CARTESIAN_POINT('',(7.579347141319,1.22,0.2));+#6843=ORIENTED_EDGE('',*,*,#6844,.T.);+#6844=EDGE_CURVE('',#6838,#6845,#6847,.T.);+#6845=VERTEX_POINT('',#6846);+#6846=CARTESIAN_POINT('',(8.,1.22,1.387778780781E-16));+#6847=LINE('',#6839,#49);+#6848=ORIENTED_EDGE('',*,*,#6849,.T.);+#6849=EDGE_CURVE('',#6845,#6850,#6852,.T.);+#6850=VERTEX_POINT('',#6851);+#6851=CARTESIAN_POINT('',(8.,1.22,0.1));+#6852=LINE('',#6846,#1074);+#6853=ORIENTED_EDGE('',*,*,#6854,.T.);+#6854=EDGE_CURVE('',#6850,#6855,#6857,.T.);+#6855=VERTEX_POINT('',#6856);+#6856=CARTESIAN_POINT('',(7.579347141319,1.22,0.1));+#6857=LINE('',#6851,#759);+#6858=ORIENTED_EDGE('',*,*,#6859,.T.);+#6859=EDGE_CURVE('',#6855,#6860,#6862,.T.);+#6860=VERTEX_POINT('',#6861);+#6861=CARTESIAN_POINT('',(7.480866366018,1.22,0.182635182233));+#6862=CIRCLE('',#6863,1.E-01);+#6863=AXIS2_PLACEMENT_3D('',#6842,#270,#5887);+#6864=ORIENTED_EDGE('',*,*,#6865,.T.);+#6865=EDGE_CURVE('',#6860,#6866,#6868,.T.);+#6866=VERTEX_POINT('',#6867);+#6867=CARTESIAN_POINT('',(7.396961550602,1.22,0.684729635533));+#6868=LINE('',#6861,#5893);+#6869=ORIENTED_EDGE('',*,*,#6870,.T.);+#6870=EDGE_CURVE('',#6866,#3498,#6871,.T.);+#6871=CIRCLE('',#6872,0.2);+#6872=AXIS2_PLACEMENT_3D('',#6830,#752,#5899);+#6873=ORIENTED_EDGE('',*,*,#3497,.T.);+#6874=PLANE('',#6875);+#6875=AXIS2_PLACEMENT_3D('',#6876,#752,#13);+#6876=CARTESIAN_POINT('',(7.414276639233,1.22,0.410238158856));+#6877=ADVANCED_FACE('',(#6878),#6939,.T.);+#6878=FACE_BOUND('',#6879,.T.);+#6879=EDGE_LOOP('',(#6880,#6884,#6890,#6897,#6902,#6909,#6914,#6919,#6924,#6930,#6935,#3504));+#6880=ORIENTED_EDGE('',*,*,#6881,.F.);+#6881=EDGE_CURVE('',#6054,#3506,#6882,.T.);+#6882=LINE('',#6883,#1074);+#6883=CARTESIAN_POINT('',(7.,0.78,0.630119079428));+#6884=ORIENTED_EDGE('',*,*,#6885,.T.);+#6885=EDGE_CURVE('',#6054,#6886,#6888,.T.);+#6886=VERTEX_POINT('',#6887);+#6887=CARTESIAN_POINT('',(7.2,0.78,0.75));+#6888=LINE('',#6889,#49);+#6889=CARTESIAN_POINT('',(6.85,0.78,0.75));+#6890=ORIENTED_EDGE('',*,*,#6891,.T.);+#6891=EDGE_CURVE('',#6886,#6892,#6894,.T.);+#6892=VERTEX_POINT('',#6893);+#6893=CARTESIAN_POINT('',(7.298480775301,0.78,0.667364817767));+#6894=CIRCLE('',#6895,0.1);+#6895=AXIS2_PLACEMENT_3D('',#6896,#270,#5850);+#6896=CARTESIAN_POINT('',(7.2,0.78,0.65));+#6897=ORIENTED_EDGE('',*,*,#6898,.T.);+#6898=EDGE_CURVE('',#6892,#6899,#6901,.T.);+#6899=VERTEX_POINT('',#6900);+#6900=CARTESIAN_POINT('',(7.382385590716,0.78,0.165270364467));+#6901=LINE('',#6893,#5856);+#6902=ORIENTED_EDGE('',*,*,#6903,.T.);+#6903=EDGE_CURVE('',#6899,#6904,#6906,.T.);+#6904=VERTEX_POINT('',#6905);+#6905=CARTESIAN_POINT('',(7.579347141319,0.78,1.387778780781E-16));+#6906=CIRCLE('',#6907,0.2);+#6907=AXIS2_PLACEMENT_3D('',#6908,#752,#5865);+#6908=CARTESIAN_POINT('',(7.579347141319,0.78,0.2));+#6909=ORIENTED_EDGE('',*,*,#6910,.T.);+#6910=EDGE_CURVE('',#6904,#6911,#6913,.T.);+#6911=VERTEX_POINT('',#6912);+#6912=CARTESIAN_POINT('',(8.,0.78,1.387778780781E-16));+#6913=LINE('',#6905,#49);+#6914=ORIENTED_EDGE('',*,*,#6915,.T.);+#6915=EDGE_CURVE('',#6911,#6916,#6918,.T.);+#6916=VERTEX_POINT('',#6917);+#6917=CARTESIAN_POINT('',(8.,0.78,0.1));+#6918=LINE('',#6912,#1074);+#6919=ORIENTED_EDGE('',*,*,#6920,.T.);+#6920=EDGE_CURVE('',#6916,#6921,#6923,.T.);+#6921=VERTEX_POINT('',#6922);+#6922=CARTESIAN_POINT('',(7.579347141319,0.78,0.1));+#6923=LINE('',#6917,#759);+#6924=ORIENTED_EDGE('',*,*,#6925,.T.);+#6925=EDGE_CURVE('',#6921,#6926,#6928,.T.);+#6926=VERTEX_POINT('',#6927);+#6927=CARTESIAN_POINT('',(7.480866366018,0.78,0.182635182233));+#6928=CIRCLE('',#6929,1.E-01);+#6929=AXIS2_PLACEMENT_3D('',#6908,#270,#5887);+#6930=ORIENTED_EDGE('',*,*,#6931,.T.);+#6931=EDGE_CURVE('',#6926,#6932,#6934,.T.);+#6932=VERTEX_POINT('',#6933);+#6933=CARTESIAN_POINT('',(7.396961550602,0.78,0.684729635533));+#6934=LINE('',#6927,#5893);+#6935=ORIENTED_EDGE('',*,*,#6936,.T.);+#6936=EDGE_CURVE('',#6932,#3501,#6937,.T.);+#6937=CIRCLE('',#6938,0.2);+#6938=AXIS2_PLACEMENT_3D('',#6896,#752,#5899);+#6939=PLANE('',#6940);+#6940=AXIS2_PLACEMENT_3D('',#6941,#752,#13);+#6941=CARTESIAN_POINT('',(7.414276639233,0.78,0.410238158856));+#6942=ADVANCED_FACE('',(#6943),#6950,.T.);+#6943=FACE_BOUND('',#6944,.F.);+#6944=EDGE_LOOP('',(#6945,#6935,#6948,#6949));+#6945=ORIENTED_EDGE('',*,*,#6946,.T.);+#6946=EDGE_CURVE('',#6866,#6932,#6947,.T.);+#6947=LINE('',#6867,#751);+#6948=ORIENTED_EDGE('',*,*,#3500,.F.);+#6949=ORIENTED_EDGE('',*,*,#6870,.F.);+#6950=CYLINDRICAL_SURFACE('',#6951,0.2);+#6951=AXIS2_PLACEMENT_3D('',#6830,#270,#5899);+#6952=ADVANCED_FACE('',(#6953),#3262,.F.);+#6953=FACE_BOUND('',#6954,.F.);+#6954=EDGE_LOOP('',(#6880,#6955,#6956,#6960));+#6955=ORIENTED_EDGE('',*,*,#6053,.T.);+#6956=ORIENTED_EDGE('',*,*,#6957,.T.);+#6957=EDGE_CURVE('',#6050,#3521,#6958,.T.);+#6958=LINE('',#6959,#1074);+#6959=CARTESIAN_POINT('',(7.,0.22,0.630119079428));+#6960=ORIENTED_EDGE('',*,*,#3520,.F.);+#6961=ADVANCED_FACE('',(#6962),#7021,.F.);+#6962=FACE_BOUND('',#6963,.F.);+#6963=EDGE_LOOP('',(#6964,#6965,#6971,#6978,#6983,#6990,#6995,#7000,#7005,#7011,#7016,#7020));+#6964=ORIENTED_EDGE('',*,*,#6957,.F.);+#6965=ORIENTED_EDGE('',*,*,#6966,.T.);+#6966=EDGE_CURVE('',#6050,#6967,#6969,.T.);+#6967=VERTEX_POINT('',#6968);+#6968=CARTESIAN_POINT('',(7.2,0.22,0.75));+#6969=LINE('',#6970,#49);+#6970=CARTESIAN_POINT('',(6.85,0.22,0.75));+#6971=ORIENTED_EDGE('',*,*,#6972,.T.);+#6972=EDGE_CURVE('',#6967,#6973,#6975,.T.);+#6973=VERTEX_POINT('',#6974);+#6974=CARTESIAN_POINT('',(7.298480775301,0.22,0.667364817767));+#6975=CIRCLE('',#6976,0.1);+#6976=AXIS2_PLACEMENT_3D('',#6977,#270,#5850);+#6977=CARTESIAN_POINT('',(7.2,0.22,0.65));+#6978=ORIENTED_EDGE('',*,*,#6979,.T.);+#6979=EDGE_CURVE('',#6973,#6980,#6982,.T.);+#6980=VERTEX_POINT('',#6981);+#6981=CARTESIAN_POINT('',(7.382385590716,0.22,0.165270364467));+#6982=LINE('',#6974,#5856);+#6983=ORIENTED_EDGE('',*,*,#6984,.T.);+#6984=EDGE_CURVE('',#6980,#6985,#6987,.T.);+#6985=VERTEX_POINT('',#6986);+#6986=CARTESIAN_POINT('',(7.579347141319,0.22,1.387778780781E-16));+#6987=CIRCLE('',#6988,0.2);+#6988=AXIS2_PLACEMENT_3D('',#6989,#752,#5865);+#6989=CARTESIAN_POINT('',(7.579347141319,0.22,0.2));+#6990=ORIENTED_EDGE('',*,*,#6991,.T.);+#6991=EDGE_CURVE('',#6985,#6992,#6994,.T.);+#6992=VERTEX_POINT('',#6993);+#6993=CARTESIAN_POINT('',(8.,0.22,1.387778780781E-16));+#6994=LINE('',#6986,#49);+#6995=ORIENTED_EDGE('',*,*,#6996,.T.);+#6996=EDGE_CURVE('',#6992,#6997,#6999,.T.);+#6997=VERTEX_POINT('',#6998);+#6998=CARTESIAN_POINT('',(8.,0.22,0.1));+#6999=LINE('',#6993,#1074);+#7000=ORIENTED_EDGE('',*,*,#7001,.T.);+#7001=EDGE_CURVE('',#6997,#7002,#7004,.T.);+#7002=VERTEX_POINT('',#7003);+#7003=CARTESIAN_POINT('',(7.579347141319,0.22,0.1));+#7004=LINE('',#6998,#759);+#7005=ORIENTED_EDGE('',*,*,#7006,.T.);+#7006=EDGE_CURVE('',#7002,#7007,#7009,.T.);+#7007=VERTEX_POINT('',#7008);+#7008=CARTESIAN_POINT('',(7.480866366018,0.22,0.182635182233));+#7009=CIRCLE('',#7010,1.E-01);+#7010=AXIS2_PLACEMENT_3D('',#6989,#270,#5887);+#7011=ORIENTED_EDGE('',*,*,#7012,.T.);+#7012=EDGE_CURVE('',#7007,#7013,#7015,.T.);+#7013=VERTEX_POINT('',#7014);+#7014=CARTESIAN_POINT('',(7.396961550602,0.22,0.684729635533));+#7015=LINE('',#7008,#5893);+#7016=ORIENTED_EDGE('',*,*,#7017,.T.);+#7017=EDGE_CURVE('',#7013,#3533,#7018,.T.);+#7018=CIRCLE('',#7019,0.2);+#7019=AXIS2_PLACEMENT_3D('',#6977,#752,#5899);+#7020=ORIENTED_EDGE('',*,*,#3532,.T.);+#7021=PLANE('',#7022);+#7022=AXIS2_PLACEMENT_3D('',#7023,#752,#13);+#7023=CARTESIAN_POINT('',(7.414276639233,0.22,0.410238158856));+#7024=ADVANCED_FACE('',(#7025),#7086,.T.);+#7025=FACE_BOUND('',#7026,.T.);+#7026=EDGE_LOOP('',(#7027,#7031,#7037,#7044,#7049,#7056,#7061,#7066,#7071,#7077,#7082,#3539));+#7027=ORIENTED_EDGE('',*,*,#7028,.F.);+#7028=EDGE_CURVE('',#6046,#3541,#7029,.T.);+#7029=LINE('',#7030,#1074);+#7030=CARTESIAN_POINT('',(7.,-0.22,0.630119079428));+#7031=ORIENTED_EDGE('',*,*,#7032,.T.);+#7032=EDGE_CURVE('',#6046,#7033,#7035,.T.);+#7033=VERTEX_POINT('',#7034);+#7034=CARTESIAN_POINT('',(7.2,-0.22,0.75));+#7035=LINE('',#7036,#49);+#7036=CARTESIAN_POINT('',(6.85,-0.22,0.75));+#7037=ORIENTED_EDGE('',*,*,#7038,.T.);+#7038=EDGE_CURVE('',#7033,#7039,#7041,.T.);+#7039=VERTEX_POINT('',#7040);+#7040=CARTESIAN_POINT('',(7.298480775301,-0.22,0.667364817767));+#7041=CIRCLE('',#7042,0.1);+#7042=AXIS2_PLACEMENT_3D('',#7043,#270,#5850);+#7043=CARTESIAN_POINT('',(7.2,-0.22,0.65));+#7044=ORIENTED_EDGE('',*,*,#7045,.T.);+#7045=EDGE_CURVE('',#7039,#7046,#7048,.T.);+#7046=VERTEX_POINT('',#7047);+#7047=CARTESIAN_POINT('',(7.382385590716,-0.22,0.165270364467));+#7048=LINE('',#7040,#5856);+#7049=ORIENTED_EDGE('',*,*,#7050,.T.);+#7050=EDGE_CURVE('',#7046,#7051,#7053,.T.);+#7051=VERTEX_POINT('',#7052);+#7052=CARTESIAN_POINT('',(7.579347141319,-0.22,1.387778780781E-16));+#7053=CIRCLE('',#7054,0.2);+#7054=AXIS2_PLACEMENT_3D('',#7055,#752,#5865);+#7055=CARTESIAN_POINT('',(7.579347141319,-0.22,0.2));+#7056=ORIENTED_EDGE('',*,*,#7057,.T.);+#7057=EDGE_CURVE('',#7051,#7058,#7060,.T.);+#7058=VERTEX_POINT('',#7059);+#7059=CARTESIAN_POINT('',(8.,-0.22,1.387778780781E-16));+#7060=LINE('',#7052,#49);+#7061=ORIENTED_EDGE('',*,*,#7062,.T.);+#7062=EDGE_CURVE('',#7058,#7063,#7065,.T.);+#7063=VERTEX_POINT('',#7064);+#7064=CARTESIAN_POINT('',(8.,-0.22,0.1));+#7065=LINE('',#7059,#1074);+#7066=ORIENTED_EDGE('',*,*,#7067,.T.);+#7067=EDGE_CURVE('',#7063,#7068,#7070,.T.);+#7068=VERTEX_POINT('',#7069);+#7069=CARTESIAN_POINT('',(7.579347141319,-0.22,0.1));+#7070=LINE('',#7064,#759);+#7071=ORIENTED_EDGE('',*,*,#7072,.T.);+#7072=EDGE_CURVE('',#7068,#7073,#7075,.T.);+#7073=VERTEX_POINT('',#7074);+#7074=CARTESIAN_POINT('',(7.480866366018,-0.22,0.182635182233));+#7075=CIRCLE('',#7076,1.E-01);+#7076=AXIS2_PLACEMENT_3D('',#7055,#270,#5887);+#7077=ORIENTED_EDGE('',*,*,#7078,.T.);+#7078=EDGE_CURVE('',#7073,#7079,#7081,.T.);+#7079=VERTEX_POINT('',#7080);+#7080=CARTESIAN_POINT('',(7.396961550602,-0.22,0.684729635533));+#7081=LINE('',#7074,#5893);+#7082=ORIENTED_EDGE('',*,*,#7083,.T.);+#7083=EDGE_CURVE('',#7079,#3536,#7084,.T.);+#7084=CIRCLE('',#7085,0.2);+#7085=AXIS2_PLACEMENT_3D('',#7043,#752,#5899);+#7086=PLANE('',#7087);+#7087=AXIS2_PLACEMENT_3D('',#7088,#752,#13);+#7088=CARTESIAN_POINT('',(7.414276639233,-0.22,0.410238158856));+#7089=ADVANCED_FACE('',(#7090),#7097,.T.);+#7090=FACE_BOUND('',#7091,.F.);+#7091=EDGE_LOOP('',(#7092,#7082,#7095,#7096));+#7092=ORIENTED_EDGE('',*,*,#7093,.T.);+#7093=EDGE_CURVE('',#7013,#7079,#7094,.T.);+#7094=LINE('',#7014,#751);+#7095=ORIENTED_EDGE('',*,*,#3535,.F.);+#7096=ORIENTED_EDGE('',*,*,#7017,.F.);+#7097=CYLINDRICAL_SURFACE('',#7098,0.2);+#7098=AXIS2_PLACEMENT_3D('',#6977,#270,#5899);+#7099=ADVANCED_FACE('',(#7100),#3262,.F.);+#7100=FACE_BOUND('',#7101,.F.);+#7101=EDGE_LOOP('',(#7027,#7102,#7103,#7107));+#7102=ORIENTED_EDGE('',*,*,#6045,.T.);+#7103=ORIENTED_EDGE('',*,*,#7104,.T.);+#7104=EDGE_CURVE('',#6042,#3556,#7105,.T.);+#7105=LINE('',#7106,#1074);+#7106=CARTESIAN_POINT('',(7.,-0.78,0.630119079428));+#7107=ORIENTED_EDGE('',*,*,#3555,.F.);+#7108=ADVANCED_FACE('',(#7109),#7168,.F.);+#7109=FACE_BOUND('',#7110,.F.);+#7110=EDGE_LOOP('',(#7111,#7112,#7118,#7125,#7130,#7137,#7142,#7147,#7152,#7158,#7163,#7167));+#7111=ORIENTED_EDGE('',*,*,#7104,.F.);+#7112=ORIENTED_EDGE('',*,*,#7113,.T.);+#7113=EDGE_CURVE('',#6042,#7114,#7116,.T.);+#7114=VERTEX_POINT('',#7115);+#7115=CARTESIAN_POINT('',(7.2,-0.78,0.75));+#7116=LINE('',#7117,#49);+#7117=CARTESIAN_POINT('',(6.85,-0.78,0.75));+#7118=ORIENTED_EDGE('',*,*,#7119,.T.);+#7119=EDGE_CURVE('',#7114,#7120,#7122,.T.);+#7120=VERTEX_POINT('',#7121);+#7121=CARTESIAN_POINT('',(7.298480775301,-0.78,0.667364817767));+#7122=CIRCLE('',#7123,0.1);+#7123=AXIS2_PLACEMENT_3D('',#7124,#270,#5850);+#7124=CARTESIAN_POINT('',(7.2,-0.78,0.65));+#7125=ORIENTED_EDGE('',*,*,#7126,.T.);+#7126=EDGE_CURVE('',#7120,#7127,#7129,.T.);+#7127=VERTEX_POINT('',#7128);+#7128=CARTESIAN_POINT('',(7.382385590716,-0.78,0.165270364467));+#7129=LINE('',#7121,#5856);+#7130=ORIENTED_EDGE('',*,*,#7131,.T.);+#7131=EDGE_CURVE('',#7127,#7132,#7134,.T.);+#7132=VERTEX_POINT('',#7133);+#7133=CARTESIAN_POINT('',(7.579347141319,-0.78,1.387778780781E-16));+#7134=CIRCLE('',#7135,0.2);+#7135=AXIS2_PLACEMENT_3D('',#7136,#752,#5865);+#7136=CARTESIAN_POINT('',(7.579347141319,-0.78,0.2));+#7137=ORIENTED_EDGE('',*,*,#7138,.T.);+#7138=EDGE_CURVE('',#7132,#7139,#7141,.T.);+#7139=VERTEX_POINT('',#7140);+#7140=CARTESIAN_POINT('',(8.,-0.78,1.387778780781E-16));+#7141=LINE('',#7133,#49);+#7142=ORIENTED_EDGE('',*,*,#7143,.T.);+#7143=EDGE_CURVE('',#7139,#7144,#7146,.T.);+#7144=VERTEX_POINT('',#7145);+#7145=CARTESIAN_POINT('',(8.,-0.78,0.1));+#7146=LINE('',#7140,#1074);+#7147=ORIENTED_EDGE('',*,*,#7148,.T.);+#7148=EDGE_CURVE('',#7144,#7149,#7151,.T.);+#7149=VERTEX_POINT('',#7150);+#7150=CARTESIAN_POINT('',(7.579347141319,-0.78,0.1));+#7151=LINE('',#7145,#759);+#7152=ORIENTED_EDGE('',*,*,#7153,.T.);+#7153=EDGE_CURVE('',#7149,#7154,#7156,.T.);+#7154=VERTEX_POINT('',#7155);+#7155=CARTESIAN_POINT('',(7.480866366018,-0.78,0.182635182233));+#7156=CIRCLE('',#7157,1.E-01);+#7157=AXIS2_PLACEMENT_3D('',#7136,#270,#5887);+#7158=ORIENTED_EDGE('',*,*,#7159,.T.);+#7159=EDGE_CURVE('',#7154,#7160,#7162,.T.);+#7160=VERTEX_POINT('',#7161);+#7161=CARTESIAN_POINT('',(7.396961550602,-0.78,0.684729635533));+#7162=LINE('',#7155,#5893);+#7163=ORIENTED_EDGE('',*,*,#7164,.T.);+#7164=EDGE_CURVE('',#7160,#3568,#7165,.T.);+#7165=CIRCLE('',#7166,0.2);+#7166=AXIS2_PLACEMENT_3D('',#7124,#752,#5899);+#7167=ORIENTED_EDGE('',*,*,#3567,.T.);+#7168=PLANE('',#7169);+#7169=AXIS2_PLACEMENT_3D('',#7170,#752,#13);+#7170=CARTESIAN_POINT('',(7.414276639233,-0.78,0.410238158856));+#7171=ADVANCED_FACE('',(#7172),#7233,.T.);+#7172=FACE_BOUND('',#7173,.T.);+#7173=EDGE_LOOP('',(#7174,#7178,#7184,#7191,#7196,#7203,#7208,#7213,#7218,#7224,#7229,#3574));+#7174=ORIENTED_EDGE('',*,*,#7175,.F.);+#7175=EDGE_CURVE('',#6038,#3576,#7176,.T.);+#7176=LINE('',#7177,#1074);+#7177=CARTESIAN_POINT('',(7.,-1.22,0.630119079428));+#7178=ORIENTED_EDGE('',*,*,#7179,.T.);+#7179=EDGE_CURVE('',#6038,#7180,#7182,.T.);+#7180=VERTEX_POINT('',#7181);+#7181=CARTESIAN_POINT('',(7.2,-1.22,0.75));+#7182=LINE('',#7183,#49);+#7183=CARTESIAN_POINT('',(6.85,-1.22,0.75));+#7184=ORIENTED_EDGE('',*,*,#7185,.T.);+#7185=EDGE_CURVE('',#7180,#7186,#7188,.T.);+#7186=VERTEX_POINT('',#7187);+#7187=CARTESIAN_POINT('',(7.298480775301,-1.22,0.667364817767));+#7188=CIRCLE('',#7189,0.1);+#7189=AXIS2_PLACEMENT_3D('',#7190,#270,#5850);+#7190=CARTESIAN_POINT('',(7.2,-1.22,0.65));+#7191=ORIENTED_EDGE('',*,*,#7192,.T.);+#7192=EDGE_CURVE('',#7186,#7193,#7195,.T.);+#7193=VERTEX_POINT('',#7194);+#7194=CARTESIAN_POINT('',(7.382385590716,-1.22,0.165270364467));+#7195=LINE('',#7187,#5856);+#7196=ORIENTED_EDGE('',*,*,#7197,.T.);+#7197=EDGE_CURVE('',#7193,#7198,#7200,.T.);+#7198=VERTEX_POINT('',#7199);+#7199=CARTESIAN_POINT('',(7.579347141319,-1.22,1.387778780781E-16));+#7200=CIRCLE('',#7201,0.2);+#7201=AXIS2_PLACEMENT_3D('',#7202,#752,#5865);+#7202=CARTESIAN_POINT('',(7.579347141319,-1.22,0.2));+#7203=ORIENTED_EDGE('',*,*,#7204,.T.);+#7204=EDGE_CURVE('',#7198,#7205,#7207,.T.);+#7205=VERTEX_POINT('',#7206);+#7206=CARTESIAN_POINT('',(8.,-1.22,1.387778780781E-16));+#7207=LINE('',#7199,#49);+#7208=ORIENTED_EDGE('',*,*,#7209,.T.);+#7209=EDGE_CURVE('',#7205,#7210,#7212,.T.);+#7210=VERTEX_POINT('',#7211);+#7211=CARTESIAN_POINT('',(8.,-1.22,0.1));+#7212=LINE('',#7206,#1074);+#7213=ORIENTED_EDGE('',*,*,#7214,.T.);+#7214=EDGE_CURVE('',#7210,#7215,#7217,.T.);+#7215=VERTEX_POINT('',#7216);+#7216=CARTESIAN_POINT('',(7.579347141319,-1.22,0.1));+#7217=LINE('',#7211,#759);+#7218=ORIENTED_EDGE('',*,*,#7219,.T.);+#7219=EDGE_CURVE('',#7215,#7220,#7222,.T.);+#7220=VERTEX_POINT('',#7221);+#7221=CARTESIAN_POINT('',(7.480866366018,-1.22,0.182635182233));+#7222=CIRCLE('',#7223,1.E-01);+#7223=AXIS2_PLACEMENT_3D('',#7202,#270,#5887);+#7224=ORIENTED_EDGE('',*,*,#7225,.T.);+#7225=EDGE_CURVE('',#7220,#7226,#7228,.T.);+#7226=VERTEX_POINT('',#7227);+#7227=CARTESIAN_POINT('',(7.396961550602,-1.22,0.684729635533));+#7228=LINE('',#7221,#5893);+#7229=ORIENTED_EDGE('',*,*,#7230,.T.);+#7230=EDGE_CURVE('',#7226,#3571,#7231,.T.);+#7231=CIRCLE('',#7232,0.2);+#7232=AXIS2_PLACEMENT_3D('',#7190,#752,#5899);+#7233=PLANE('',#7234);+#7234=AXIS2_PLACEMENT_3D('',#7235,#752,#13);+#7235=CARTESIAN_POINT('',(7.414276639233,-1.22,0.410238158856));+#7236=ADVANCED_FACE('',(#7237),#7244,.T.);+#7237=FACE_BOUND('',#7238,.F.);+#7238=EDGE_LOOP('',(#7239,#7229,#7242,#7243));+#7239=ORIENTED_EDGE('',*,*,#7240,.T.);+#7240=EDGE_CURVE('',#7160,#7226,#7241,.T.);+#7241=LINE('',#7161,#751);+#7242=ORIENTED_EDGE('',*,*,#3570,.F.);+#7243=ORIENTED_EDGE('',*,*,#7164,.F.);+#7244=CYLINDRICAL_SURFACE('',#7245,0.2);+#7245=AXIS2_PLACEMENT_3D('',#7124,#270,#5899);+#7246=ADVANCED_FACE('',(#7247),#3262,.F.);+#7247=FACE_BOUND('',#7248,.F.);+#7248=EDGE_LOOP('',(#7174,#7249,#7250,#7254));+#7249=ORIENTED_EDGE('',*,*,#6037,.T.);+#7250=ORIENTED_EDGE('',*,*,#7251,.T.);+#7251=EDGE_CURVE('',#6034,#3591,#7252,.T.);+#7252=LINE('',#7253,#1074);+#7253=CARTESIAN_POINT('',(7.,-1.78,0.630119079428));+#7254=ORIENTED_EDGE('',*,*,#3590,.F.);+#7255=ADVANCED_FACE('',(#7256),#7315,.F.);+#7256=FACE_BOUND('',#7257,.F.);+#7257=EDGE_LOOP('',(#7258,#7259,#7265,#7272,#7277,#7284,#7289,#7294,#7299,#7305,#7310,#7314));+#7258=ORIENTED_EDGE('',*,*,#7251,.F.);+#7259=ORIENTED_EDGE('',*,*,#7260,.T.);+#7260=EDGE_CURVE('',#6034,#7261,#7263,.T.);+#7261=VERTEX_POINT('',#7262);+#7262=CARTESIAN_POINT('',(7.2,-1.78,0.75));+#7263=LINE('',#7264,#49);+#7264=CARTESIAN_POINT('',(6.85,-1.78,0.75));+#7265=ORIENTED_EDGE('',*,*,#7266,.T.);+#7266=EDGE_CURVE('',#7261,#7267,#7269,.T.);+#7267=VERTEX_POINT('',#7268);+#7268=CARTESIAN_POINT('',(7.298480775301,-1.78,0.667364817767));+#7269=CIRCLE('',#7270,0.1);+#7270=AXIS2_PLACEMENT_3D('',#7271,#270,#5850);+#7271=CARTESIAN_POINT('',(7.2,-1.78,0.65));+#7272=ORIENTED_EDGE('',*,*,#7273,.T.);+#7273=EDGE_CURVE('',#7267,#7274,#7276,.T.);+#7274=VERTEX_POINT('',#7275);+#7275=CARTESIAN_POINT('',(7.382385590716,-1.78,0.165270364467));+#7276=LINE('',#7268,#5856);+#7277=ORIENTED_EDGE('',*,*,#7278,.T.);+#7278=EDGE_CURVE('',#7274,#7279,#7281,.T.);+#7279=VERTEX_POINT('',#7280);+#7280=CARTESIAN_POINT('',(7.579347141319,-1.78,1.387778780781E-16));+#7281=CIRCLE('',#7282,0.2);+#7282=AXIS2_PLACEMENT_3D('',#7283,#752,#5865);+#7283=CARTESIAN_POINT('',(7.579347141319,-1.78,0.2));+#7284=ORIENTED_EDGE('',*,*,#7285,.T.);+#7285=EDGE_CURVE('',#7279,#7286,#7288,.T.);+#7286=VERTEX_POINT('',#7287);+#7287=CARTESIAN_POINT('',(8.,-1.78,1.387778780781E-16));+#7288=LINE('',#7280,#49);+#7289=ORIENTED_EDGE('',*,*,#7290,.T.);+#7290=EDGE_CURVE('',#7286,#7291,#7293,.T.);+#7291=VERTEX_POINT('',#7292);+#7292=CARTESIAN_POINT('',(8.,-1.78,0.1));+#7293=LINE('',#7287,#1074);+#7294=ORIENTED_EDGE('',*,*,#7295,.T.);+#7295=EDGE_CURVE('',#7291,#7296,#7298,.T.);+#7296=VERTEX_POINT('',#7297);+#7297=CARTESIAN_POINT('',(7.579347141319,-1.78,0.1));+#7298=LINE('',#7292,#759);+#7299=ORIENTED_EDGE('',*,*,#7300,.T.);+#7300=EDGE_CURVE('',#7296,#7301,#7303,.T.);+#7301=VERTEX_POINT('',#7302);+#7302=CARTESIAN_POINT('',(7.480866366018,-1.78,0.182635182233));+#7303=CIRCLE('',#7304,1.E-01);+#7304=AXIS2_PLACEMENT_3D('',#7283,#270,#5887);+#7305=ORIENTED_EDGE('',*,*,#7306,.T.);+#7306=EDGE_CURVE('',#7301,#7307,#7309,.T.);+#7307=VERTEX_POINT('',#7308);+#7308=CARTESIAN_POINT('',(7.396961550602,-1.78,0.684729635533));+#7309=LINE('',#7302,#5893);+#7310=ORIENTED_EDGE('',*,*,#7311,.T.);+#7311=EDGE_CURVE('',#7307,#3603,#7312,.T.);+#7312=CIRCLE('',#7313,0.2);+#7313=AXIS2_PLACEMENT_3D('',#7271,#752,#5899);+#7314=ORIENTED_EDGE('',*,*,#3602,.T.);+#7315=PLANE('',#7316);+#7316=AXIS2_PLACEMENT_3D('',#7317,#752,#13);+#7317=CARTESIAN_POINT('',(7.414276639233,-1.78,0.410238158856));+#7318=ADVANCED_FACE('',(#7319),#7380,.T.);+#7319=FACE_BOUND('',#7320,.T.);+#7320=EDGE_LOOP('',(#7321,#7325,#7331,#7338,#7343,#7350,#7355,#7360,#7365,#7371,#7376,#3609));+#7321=ORIENTED_EDGE('',*,*,#7322,.F.);+#7322=EDGE_CURVE('',#6030,#3611,#7323,.T.);+#7323=LINE('',#7324,#1074);+#7324=CARTESIAN_POINT('',(7.,-2.22,0.630119079428));+#7325=ORIENTED_EDGE('',*,*,#7326,.T.);+#7326=EDGE_CURVE('',#6030,#7327,#7329,.T.);+#7327=VERTEX_POINT('',#7328);+#7328=CARTESIAN_POINT('',(7.2,-2.22,0.75));+#7329=LINE('',#7330,#49);+#7330=CARTESIAN_POINT('',(6.85,-2.22,0.75));+#7331=ORIENTED_EDGE('',*,*,#7332,.T.);+#7332=EDGE_CURVE('',#7327,#7333,#7335,.T.);+#7333=VERTEX_POINT('',#7334);+#7334=CARTESIAN_POINT('',(7.298480775301,-2.22,0.667364817767));+#7335=CIRCLE('',#7336,0.1);+#7336=AXIS2_PLACEMENT_3D('',#7337,#270,#5850);+#7337=CARTESIAN_POINT('',(7.2,-2.22,0.65));+#7338=ORIENTED_EDGE('',*,*,#7339,.T.);+#7339=EDGE_CURVE('',#7333,#7340,#7342,.T.);+#7340=VERTEX_POINT('',#7341);+#7341=CARTESIAN_POINT('',(7.382385590716,-2.22,0.165270364467));+#7342=LINE('',#7334,#5856);+#7343=ORIENTED_EDGE('',*,*,#7344,.T.);+#7344=EDGE_CURVE('',#7340,#7345,#7347,.T.);+#7345=VERTEX_POINT('',#7346);+#7346=CARTESIAN_POINT('',(7.579347141319,-2.22,1.387778780781E-16));+#7347=CIRCLE('',#7348,0.2);+#7348=AXIS2_PLACEMENT_3D('',#7349,#752,#5865);+#7349=CARTESIAN_POINT('',(7.579347141319,-2.22,0.2));+#7350=ORIENTED_EDGE('',*,*,#7351,.T.);+#7351=EDGE_CURVE('',#7345,#7352,#7354,.T.);+#7352=VERTEX_POINT('',#7353);+#7353=CARTESIAN_POINT('',(8.,-2.22,1.387778780781E-16));+#7354=LINE('',#7346,#49);+#7355=ORIENTED_EDGE('',*,*,#7356,.T.);+#7356=EDGE_CURVE('',#7352,#7357,#7359,.T.);+#7357=VERTEX_POINT('',#7358);+#7358=CARTESIAN_POINT('',(8.,-2.22,0.1));+#7359=LINE('',#7353,#1074);+#7360=ORIENTED_EDGE('',*,*,#7361,.T.);+#7361=EDGE_CURVE('',#7357,#7362,#7364,.T.);+#7362=VERTEX_POINT('',#7363);+#7363=CARTESIAN_POINT('',(7.579347141319,-2.22,0.1));+#7364=LINE('',#7358,#759);+#7365=ORIENTED_EDGE('',*,*,#7366,.T.);+#7366=EDGE_CURVE('',#7362,#7367,#7369,.T.);+#7367=VERTEX_POINT('',#7368);+#7368=CARTESIAN_POINT('',(7.480866366018,-2.22,0.182635182233));+#7369=CIRCLE('',#7370,1.E-01);+#7370=AXIS2_PLACEMENT_3D('',#7349,#270,#5887);+#7371=ORIENTED_EDGE('',*,*,#7372,.T.);+#7372=EDGE_CURVE('',#7367,#7373,#7375,.T.);+#7373=VERTEX_POINT('',#7374);+#7374=CARTESIAN_POINT('',(7.396961550602,-2.22,0.684729635533));+#7375=LINE('',#7368,#5893);+#7376=ORIENTED_EDGE('',*,*,#7377,.T.);+#7377=EDGE_CURVE('',#7373,#3606,#7378,.T.);+#7378=CIRCLE('',#7379,0.2);+#7379=AXIS2_PLACEMENT_3D('',#7337,#752,#5899);+#7380=PLANE('',#7381);+#7381=AXIS2_PLACEMENT_3D('',#7382,#752,#13);+#7382=CARTESIAN_POINT('',(7.414276639233,-2.22,0.410238158856));+#7383=ADVANCED_FACE('',(#7384),#7391,.T.);+#7384=FACE_BOUND('',#7385,.F.);+#7385=EDGE_LOOP('',(#7386,#7376,#7389,#7390));+#7386=ORIENTED_EDGE('',*,*,#7387,.T.);+#7387=EDGE_CURVE('',#7307,#7373,#7388,.T.);+#7388=LINE('',#7308,#751);+#7389=ORIENTED_EDGE('',*,*,#3605,.F.);+#7390=ORIENTED_EDGE('',*,*,#7311,.F.);+#7391=CYLINDRICAL_SURFACE('',#7392,0.2);+#7392=AXIS2_PLACEMENT_3D('',#7271,#270,#5899);+#7393=ADVANCED_FACE('',(#7394),#3262,.F.);+#7394=FACE_BOUND('',#7395,.F.);+#7395=EDGE_LOOP('',(#7321,#7396,#7397,#7401));+#7396=ORIENTED_EDGE('',*,*,#6029,.T.);+#7397=ORIENTED_EDGE('',*,*,#7398,.T.);+#7398=EDGE_CURVE('',#6026,#3626,#7399,.T.);+#7399=LINE('',#7400,#1074);+#7400=CARTESIAN_POINT('',(7.,-2.78,0.630119079428));+#7401=ORIENTED_EDGE('',*,*,#3625,.F.);+#7402=ADVANCED_FACE('',(#7403),#7462,.F.);+#7403=FACE_BOUND('',#7404,.F.);+#7404=EDGE_LOOP('',(#7405,#7406,#7412,#7419,#7424,#7431,#7436,#7441,#7446,#7452,#7457,#7461));+#7405=ORIENTED_EDGE('',*,*,#7398,.F.);+#7406=ORIENTED_EDGE('',*,*,#7407,.T.);+#7407=EDGE_CURVE('',#6026,#7408,#7410,.T.);+#7408=VERTEX_POINT('',#7409);+#7409=CARTESIAN_POINT('',(7.2,-2.78,0.75));+#7410=LINE('',#7411,#49);+#7411=CARTESIAN_POINT('',(6.85,-2.78,0.75));+#7412=ORIENTED_EDGE('',*,*,#7413,.T.);+#7413=EDGE_CURVE('',#7408,#7414,#7416,.T.);+#7414=VERTEX_POINT('',#7415);+#7415=CARTESIAN_POINT('',(7.298480775301,-2.78,0.667364817767));+#7416=CIRCLE('',#7417,0.1);+#7417=AXIS2_PLACEMENT_3D('',#7418,#270,#5850);+#7418=CARTESIAN_POINT('',(7.2,-2.78,0.65));+#7419=ORIENTED_EDGE('',*,*,#7420,.T.);+#7420=EDGE_CURVE('',#7414,#7421,#7423,.T.);+#7421=VERTEX_POINT('',#7422);+#7422=CARTESIAN_POINT('',(7.382385590716,-2.78,0.165270364467));+#7423=LINE('',#7415,#5856);+#7424=ORIENTED_EDGE('',*,*,#7425,.T.);+#7425=EDGE_CURVE('',#7421,#7426,#7428,.T.);+#7426=VERTEX_POINT('',#7427);+#7427=CARTESIAN_POINT('',(7.579347141319,-2.78,1.387778780781E-16));+#7428=CIRCLE('',#7429,0.2);+#7429=AXIS2_PLACEMENT_3D('',#7430,#752,#5865);+#7430=CARTESIAN_POINT('',(7.579347141319,-2.78,0.2));+#7431=ORIENTED_EDGE('',*,*,#7432,.T.);+#7432=EDGE_CURVE('',#7426,#7433,#7435,.T.);+#7433=VERTEX_POINT('',#7434);+#7434=CARTESIAN_POINT('',(8.,-2.78,1.387778780781E-16));+#7435=LINE('',#7427,#49);+#7436=ORIENTED_EDGE('',*,*,#7437,.T.);+#7437=EDGE_CURVE('',#7433,#7438,#7440,.T.);+#7438=VERTEX_POINT('',#7439);+#7439=CARTESIAN_POINT('',(8.,-2.78,0.1));+#7440=LINE('',#7434,#1074);+#7441=ORIENTED_EDGE('',*,*,#7442,.T.);+#7442=EDGE_CURVE('',#7438,#7443,#7445,.T.);+#7443=VERTEX_POINT('',#7444);+#7444=CARTESIAN_POINT('',(7.579347141319,-2.78,0.1));+#7445=LINE('',#7439,#759);+#7446=ORIENTED_EDGE('',*,*,#7447,.T.);+#7447=EDGE_CURVE('',#7443,#7448,#7450,.T.);+#7448=VERTEX_POINT('',#7449);+#7449=CARTESIAN_POINT('',(7.480866366018,-2.78,0.182635182233));+#7450=CIRCLE('',#7451,1.E-01);+#7451=AXIS2_PLACEMENT_3D('',#7430,#270,#5887);+#7452=ORIENTED_EDGE('',*,*,#7453,.T.);+#7453=EDGE_CURVE('',#7448,#7454,#7456,.T.);+#7454=VERTEX_POINT('',#7455);+#7455=CARTESIAN_POINT('',(7.396961550602,-2.78,0.684729635533));+#7456=LINE('',#7449,#5893);+#7457=ORIENTED_EDGE('',*,*,#7458,.T.);+#7458=EDGE_CURVE('',#7454,#3638,#7459,.T.);+#7459=CIRCLE('',#7460,0.2);+#7460=AXIS2_PLACEMENT_3D('',#7418,#752,#5899);+#7461=ORIENTED_EDGE('',*,*,#3637,.T.);+#7462=PLANE('',#7463);+#7463=AXIS2_PLACEMENT_3D('',#7464,#752,#13);+#7464=CARTESIAN_POINT('',(7.414276639233,-2.78,0.410238158856));+#7465=ADVANCED_FACE('',(#7466),#7527,.T.);+#7466=FACE_BOUND('',#7467,.T.);+#7467=EDGE_LOOP('',(#7468,#7472,#7478,#7485,#7490,#7497,#7502,#7507,#7512,#7518,#7523,#3644));+#7468=ORIENTED_EDGE('',*,*,#7469,.F.);+#7469=EDGE_CURVE('',#6022,#3646,#7470,.T.);+#7470=LINE('',#7471,#1074);+#7471=CARTESIAN_POINT('',(7.,-3.22,0.630119079428));+#7472=ORIENTED_EDGE('',*,*,#7473,.T.);+#7473=EDGE_CURVE('',#6022,#7474,#7476,.T.);+#7474=VERTEX_POINT('',#7475);+#7475=CARTESIAN_POINT('',(7.2,-3.22,0.75));+#7476=LINE('',#7477,#49);+#7477=CARTESIAN_POINT('',(6.85,-3.22,0.75));+#7478=ORIENTED_EDGE('',*,*,#7479,.T.);+#7479=EDGE_CURVE('',#7474,#7480,#7482,.T.);+#7480=VERTEX_POINT('',#7481);+#7481=CARTESIAN_POINT('',(7.298480775301,-3.22,0.667364817767));+#7482=CIRCLE('',#7483,0.1);+#7483=AXIS2_PLACEMENT_3D('',#7484,#270,#5850);+#7484=CARTESIAN_POINT('',(7.2,-3.22,0.65));+#7485=ORIENTED_EDGE('',*,*,#7486,.T.);+#7486=EDGE_CURVE('',#7480,#7487,#7489,.T.);+#7487=VERTEX_POINT('',#7488);+#7488=CARTESIAN_POINT('',(7.382385590716,-3.22,0.165270364467));+#7489=LINE('',#7481,#5856);+#7490=ORIENTED_EDGE('',*,*,#7491,.T.);+#7491=EDGE_CURVE('',#7487,#7492,#7494,.T.);+#7492=VERTEX_POINT('',#7493);+#7493=CARTESIAN_POINT('',(7.579347141319,-3.22,1.387778780781E-16));+#7494=CIRCLE('',#7495,0.2);+#7495=AXIS2_PLACEMENT_3D('',#7496,#752,#5865);+#7496=CARTESIAN_POINT('',(7.579347141319,-3.22,0.2));+#7497=ORIENTED_EDGE('',*,*,#7498,.T.);+#7498=EDGE_CURVE('',#7492,#7499,#7501,.T.);+#7499=VERTEX_POINT('',#7500);+#7500=CARTESIAN_POINT('',(8.,-3.22,1.387778780781E-16));+#7501=LINE('',#7493,#49);+#7502=ORIENTED_EDGE('',*,*,#7503,.T.);+#7503=EDGE_CURVE('',#7499,#7504,#7506,.T.);+#7504=VERTEX_POINT('',#7505);+#7505=CARTESIAN_POINT('',(8.,-3.22,0.1));+#7506=LINE('',#7500,#1074);+#7507=ORIENTED_EDGE('',*,*,#7508,.T.);+#7508=EDGE_CURVE('',#7504,#7509,#7511,.T.);+#7509=VERTEX_POINT('',#7510);+#7510=CARTESIAN_POINT('',(7.579347141319,-3.22,0.1));+#7511=LINE('',#7505,#759);+#7512=ORIENTED_EDGE('',*,*,#7513,.T.);+#7513=EDGE_CURVE('',#7509,#7514,#7516,.T.);+#7514=VERTEX_POINT('',#7515);+#7515=CARTESIAN_POINT('',(7.480866366018,-3.22,0.182635182233));+#7516=CIRCLE('',#7517,1.E-01);+#7517=AXIS2_PLACEMENT_3D('',#7496,#270,#5887);+#7518=ORIENTED_EDGE('',*,*,#7519,.T.);+#7519=EDGE_CURVE('',#7514,#7520,#7522,.T.);+#7520=VERTEX_POINT('',#7521);+#7521=CARTESIAN_POINT('',(7.396961550602,-3.22,0.684729635533));+#7522=LINE('',#7515,#5893);+#7523=ORIENTED_EDGE('',*,*,#7524,.T.);+#7524=EDGE_CURVE('',#7520,#3641,#7525,.T.);+#7525=CIRCLE('',#7526,0.2);+#7526=AXIS2_PLACEMENT_3D('',#7484,#752,#5899);+#7527=PLANE('',#7528);+#7528=AXIS2_PLACEMENT_3D('',#7529,#752,#13);+#7529=CARTESIAN_POINT('',(7.414276639233,-3.22,0.410238158856));+#7530=ADVANCED_FACE('',(#7531),#7538,.T.);+#7531=FACE_BOUND('',#7532,.F.);+#7532=EDGE_LOOP('',(#7533,#7523,#7536,#7537));+#7533=ORIENTED_EDGE('',*,*,#7534,.T.);+#7534=EDGE_CURVE('',#7454,#7520,#7535,.T.);+#7535=LINE('',#7455,#751);+#7536=ORIENTED_EDGE('',*,*,#3640,.F.);+#7537=ORIENTED_EDGE('',*,*,#7458,.F.);+#7538=CYLINDRICAL_SURFACE('',#7539,0.2);+#7539=AXIS2_PLACEMENT_3D('',#7418,#270,#5899);+#7540=ADVANCED_FACE('',(#7541),#3262,.F.);+#7541=FACE_BOUND('',#7542,.F.);+#7542=EDGE_LOOP('',(#7468,#7543,#7544,#7548));+#7543=ORIENTED_EDGE('',*,*,#6021,.T.);+#7544=ORIENTED_EDGE('',*,*,#7545,.T.);+#7545=EDGE_CURVE('',#6018,#3661,#7546,.T.);+#7546=LINE('',#7547,#1074);+#7547=CARTESIAN_POINT('',(7.,-3.78,0.630119079428));+#7548=ORIENTED_EDGE('',*,*,#3660,.F.);+#7549=ADVANCED_FACE('',(#7550),#7609,.F.);+#7550=FACE_BOUND('',#7551,.F.);+#7551=EDGE_LOOP('',(#7552,#7553,#7559,#7566,#7571,#7578,#7583,#7588,#7593,#7599,#7604,#7608));+#7552=ORIENTED_EDGE('',*,*,#7545,.F.);+#7553=ORIENTED_EDGE('',*,*,#7554,.T.);+#7554=EDGE_CURVE('',#6018,#7555,#7557,.T.);+#7555=VERTEX_POINT('',#7556);+#7556=CARTESIAN_POINT('',(7.2,-3.78,0.75));+#7557=LINE('',#7558,#49);+#7558=CARTESIAN_POINT('',(6.85,-3.78,0.75));+#7559=ORIENTED_EDGE('',*,*,#7560,.T.);+#7560=EDGE_CURVE('',#7555,#7561,#7563,.T.);+#7561=VERTEX_POINT('',#7562);+#7562=CARTESIAN_POINT('',(7.298480775301,-3.78,0.667364817767));+#7563=CIRCLE('',#7564,0.1);+#7564=AXIS2_PLACEMENT_3D('',#7565,#270,#5850);+#7565=CARTESIAN_POINT('',(7.2,-3.78,0.65));+#7566=ORIENTED_EDGE('',*,*,#7567,.T.);+#7567=EDGE_CURVE('',#7561,#7568,#7570,.T.);+#7568=VERTEX_POINT('',#7569);+#7569=CARTESIAN_POINT('',(7.382385590716,-3.78,0.165270364467));+#7570=LINE('',#7562,#5856);+#7571=ORIENTED_EDGE('',*,*,#7572,.T.);+#7572=EDGE_CURVE('',#7568,#7573,#7575,.T.);+#7573=VERTEX_POINT('',#7574);+#7574=CARTESIAN_POINT('',(7.579347141319,-3.78,1.387778780781E-16));+#7575=CIRCLE('',#7576,0.2);+#7576=AXIS2_PLACEMENT_3D('',#7577,#752,#5865);+#7577=CARTESIAN_POINT('',(7.579347141319,-3.78,0.2));+#7578=ORIENTED_EDGE('',*,*,#7579,.T.);+#7579=EDGE_CURVE('',#7573,#7580,#7582,.T.);+#7580=VERTEX_POINT('',#7581);+#7581=CARTESIAN_POINT('',(8.,-3.78,1.387778780781E-16));+#7582=LINE('',#7574,#49);+#7583=ORIENTED_EDGE('',*,*,#7584,.T.);+#7584=EDGE_CURVE('',#7580,#7585,#7587,.T.);+#7585=VERTEX_POINT('',#7586);+#7586=CARTESIAN_POINT('',(8.,-3.78,0.1));+#7587=LINE('',#7581,#1074);+#7588=ORIENTED_EDGE('',*,*,#7589,.T.);+#7589=EDGE_CURVE('',#7585,#7590,#7592,.T.);+#7590=VERTEX_POINT('',#7591);+#7591=CARTESIAN_POINT('',(7.579347141319,-3.78,0.1));+#7592=LINE('',#7586,#759);+#7593=ORIENTED_EDGE('',*,*,#7594,.T.);+#7594=EDGE_CURVE('',#7590,#7595,#7597,.T.);+#7595=VERTEX_POINT('',#7596);+#7596=CARTESIAN_POINT('',(7.480866366018,-3.78,0.182635182233));+#7597=CIRCLE('',#7598,1.E-01);+#7598=AXIS2_PLACEMENT_3D('',#7577,#270,#5887);+#7599=ORIENTED_EDGE('',*,*,#7600,.T.);+#7600=EDGE_CURVE('',#7595,#7601,#7603,.T.);+#7601=VERTEX_POINT('',#7602);+#7602=CARTESIAN_POINT('',(7.396961550602,-3.78,0.684729635533));+#7603=LINE('',#7596,#5893);+#7604=ORIENTED_EDGE('',*,*,#7605,.T.);+#7605=EDGE_CURVE('',#7601,#3673,#7606,.T.);+#7606=CIRCLE('',#7607,0.2);+#7607=AXIS2_PLACEMENT_3D('',#7565,#752,#5899);+#7608=ORIENTED_EDGE('',*,*,#3672,.T.);+#7609=PLANE('',#7610);+#7610=AXIS2_PLACEMENT_3D('',#7611,#752,#13);+#7611=CARTESIAN_POINT('',(7.414276639233,-3.78,0.410238158856));+#7612=ADVANCED_FACE('',(#7613),#7674,.T.);+#7613=FACE_BOUND('',#7614,.T.);+#7614=EDGE_LOOP('',(#7615,#7619,#7625,#7632,#7637,#7644,#7649,#7654,#7659,#7665,#7670,#3679));+#7615=ORIENTED_EDGE('',*,*,#7616,.F.);+#7616=EDGE_CURVE('',#6014,#3681,#7617,.T.);+#7617=LINE('',#7618,#1074);+#7618=CARTESIAN_POINT('',(7.,-4.22,0.630119079428));+#7619=ORIENTED_EDGE('',*,*,#7620,.T.);+#7620=EDGE_CURVE('',#6014,#7621,#7623,.T.);+#7621=VERTEX_POINT('',#7622);+#7622=CARTESIAN_POINT('',(7.2,-4.22,0.75));+#7623=LINE('',#7624,#49);+#7624=CARTESIAN_POINT('',(6.85,-4.22,0.75));+#7625=ORIENTED_EDGE('',*,*,#7626,.T.);+#7626=EDGE_CURVE('',#7621,#7627,#7629,.T.);+#7627=VERTEX_POINT('',#7628);+#7628=CARTESIAN_POINT('',(7.298480775301,-4.22,0.667364817767));+#7629=CIRCLE('',#7630,0.1);+#7630=AXIS2_PLACEMENT_3D('',#7631,#270,#5850);+#7631=CARTESIAN_POINT('',(7.2,-4.22,0.65));+#7632=ORIENTED_EDGE('',*,*,#7633,.T.);+#7633=EDGE_CURVE('',#7627,#7634,#7636,.T.);+#7634=VERTEX_POINT('',#7635);+#7635=CARTESIAN_POINT('',(7.382385590716,-4.22,0.165270364467));+#7636=LINE('',#7628,#5856);+#7637=ORIENTED_EDGE('',*,*,#7638,.T.);+#7638=EDGE_CURVE('',#7634,#7639,#7641,.T.);+#7639=VERTEX_POINT('',#7640);+#7640=CARTESIAN_POINT('',(7.579347141319,-4.22,1.387778780781E-16));+#7641=CIRCLE('',#7642,0.2);+#7642=AXIS2_PLACEMENT_3D('',#7643,#752,#5865);+#7643=CARTESIAN_POINT('',(7.579347141319,-4.22,0.2));+#7644=ORIENTED_EDGE('',*,*,#7645,.T.);+#7645=EDGE_CURVE('',#7639,#7646,#7648,.T.);+#7646=VERTEX_POINT('',#7647);+#7647=CARTESIAN_POINT('',(8.,-4.22,1.387778780781E-16));+#7648=LINE('',#7640,#49);+#7649=ORIENTED_EDGE('',*,*,#7650,.T.);+#7650=EDGE_CURVE('',#7646,#7651,#7653,.T.);+#7651=VERTEX_POINT('',#7652);+#7652=CARTESIAN_POINT('',(8.,-4.22,0.1));+#7653=LINE('',#7647,#1074);+#7654=ORIENTED_EDGE('',*,*,#7655,.T.);+#7655=EDGE_CURVE('',#7651,#7656,#7658,.T.);+#7656=VERTEX_POINT('',#7657);+#7657=CARTESIAN_POINT('',(7.579347141319,-4.22,0.1));+#7658=LINE('',#7652,#759);+#7659=ORIENTED_EDGE('',*,*,#7660,.T.);+#7660=EDGE_CURVE('',#7656,#7661,#7663,.T.);+#7661=VERTEX_POINT('',#7662);+#7662=CARTESIAN_POINT('',(7.480866366018,-4.22,0.182635182233));+#7663=CIRCLE('',#7664,1.E-01);+#7664=AXIS2_PLACEMENT_3D('',#7643,#270,#5887);+#7665=ORIENTED_EDGE('',*,*,#7666,.T.);+#7666=EDGE_CURVE('',#7661,#7667,#7669,.T.);+#7667=VERTEX_POINT('',#7668);+#7668=CARTESIAN_POINT('',(7.396961550602,-4.22,0.684729635533));+#7669=LINE('',#7662,#5893);+#7670=ORIENTED_EDGE('',*,*,#7671,.T.);+#7671=EDGE_CURVE('',#7667,#3676,#7672,.T.);+#7672=CIRCLE('',#7673,0.2);+#7673=AXIS2_PLACEMENT_3D('',#7631,#752,#5899);+#7674=PLANE('',#7675);+#7675=AXIS2_PLACEMENT_3D('',#7676,#752,#13);+#7676=CARTESIAN_POINT('',(7.414276639233,-4.22,0.410238158856));+#7677=ADVANCED_FACE('',(#7678),#7685,.T.);+#7678=FACE_BOUND('',#7679,.F.);+#7679=EDGE_LOOP('',(#7680,#7670,#7683,#7684));+#7680=ORIENTED_EDGE('',*,*,#7681,.T.);+#7681=EDGE_CURVE('',#7601,#7667,#7682,.T.);+#7682=LINE('',#7602,#751);+#7683=ORIENTED_EDGE('',*,*,#3675,.F.);+#7684=ORIENTED_EDGE('',*,*,#7605,.F.);+#7685=CYLINDRICAL_SURFACE('',#7686,0.2);+#7686=AXIS2_PLACEMENT_3D('',#7565,#270,#5899);+#7687=ADVANCED_FACE('',(#7688),#3262,.F.);+#7688=FACE_BOUND('',#7689,.F.);+#7689=EDGE_LOOP('',(#7615,#7690,#7691,#7695));+#7690=ORIENTED_EDGE('',*,*,#6013,.T.);+#7691=ORIENTED_EDGE('',*,*,#7692,.T.);+#7692=EDGE_CURVE('',#6010,#3696,#7693,.T.);+#7693=LINE('',#7694,#1074);+#7694=CARTESIAN_POINT('',(7.,-4.78,0.630119079428));+#7695=ORIENTED_EDGE('',*,*,#3695,.F.);+#7696=ADVANCED_FACE('',(#7697),#7756,.F.);+#7697=FACE_BOUND('',#7698,.F.);+#7698=EDGE_LOOP('',(#7699,#7700,#7706,#7713,#7718,#7725,#7730,#7735,#7740,#7746,#7751,#7755));+#7699=ORIENTED_EDGE('',*,*,#7692,.F.);+#7700=ORIENTED_EDGE('',*,*,#7701,.T.);+#7701=EDGE_CURVE('',#6010,#7702,#7704,.T.);+#7702=VERTEX_POINT('',#7703);+#7703=CARTESIAN_POINT('',(7.2,-4.78,0.75));+#7704=LINE('',#7705,#49);+#7705=CARTESIAN_POINT('',(6.85,-4.78,0.75));+#7706=ORIENTED_EDGE('',*,*,#7707,.T.);+#7707=EDGE_CURVE('',#7702,#7708,#7710,.T.);+#7708=VERTEX_POINT('',#7709);+#7709=CARTESIAN_POINT('',(7.298480775301,-4.78,0.667364817767));+#7710=CIRCLE('',#7711,0.1);+#7711=AXIS2_PLACEMENT_3D('',#7712,#270,#5850);+#7712=CARTESIAN_POINT('',(7.2,-4.78,0.65));+#7713=ORIENTED_EDGE('',*,*,#7714,.T.);+#7714=EDGE_CURVE('',#7708,#7715,#7717,.T.);+#7715=VERTEX_POINT('',#7716);+#7716=CARTESIAN_POINT('',(7.382385590716,-4.78,0.165270364467));+#7717=LINE('',#7709,#5856);+#7718=ORIENTED_EDGE('',*,*,#7719,.T.);+#7719=EDGE_CURVE('',#7715,#7720,#7722,.T.);+#7720=VERTEX_POINT('',#7721);+#7721=CARTESIAN_POINT('',(7.579347141319,-4.78,1.387778780781E-16));+#7722=CIRCLE('',#7723,0.2);+#7723=AXIS2_PLACEMENT_3D('',#7724,#752,#5865);+#7724=CARTESIAN_POINT('',(7.579347141319,-4.78,0.2));+#7725=ORIENTED_EDGE('',*,*,#7726,.T.);+#7726=EDGE_CURVE('',#7720,#7727,#7729,.T.);+#7727=VERTEX_POINT('',#7728);+#7728=CARTESIAN_POINT('',(8.,-4.78,1.387778780781E-16));+#7729=LINE('',#7721,#49);+#7730=ORIENTED_EDGE('',*,*,#7731,.T.);+#7731=EDGE_CURVE('',#7727,#7732,#7734,.T.);+#7732=VERTEX_POINT('',#7733);+#7733=CARTESIAN_POINT('',(8.,-4.78,0.1));+#7734=LINE('',#7728,#1074);+#7735=ORIENTED_EDGE('',*,*,#7736,.T.);+#7736=EDGE_CURVE('',#7732,#7737,#7739,.T.);+#7737=VERTEX_POINT('',#7738);+#7738=CARTESIAN_POINT('',(7.579347141319,-4.78,0.1));+#7739=LINE('',#7733,#759);+#7740=ORIENTED_EDGE('',*,*,#7741,.T.);+#7741=EDGE_CURVE('',#7737,#7742,#7744,.T.);+#7742=VERTEX_POINT('',#7743);+#7743=CARTESIAN_POINT('',(7.480866366018,-4.78,0.182635182233));+#7744=CIRCLE('',#7745,1.E-01);+#7745=AXIS2_PLACEMENT_3D('',#7724,#270,#5887);+#7746=ORIENTED_EDGE('',*,*,#7747,.T.);+#7747=EDGE_CURVE('',#7742,#7748,#7750,.T.);+#7748=VERTEX_POINT('',#7749);+#7749=CARTESIAN_POINT('',(7.396961550602,-4.78,0.684729635533));+#7750=LINE('',#7743,#5893);+#7751=ORIENTED_EDGE('',*,*,#7752,.T.);+#7752=EDGE_CURVE('',#7748,#3708,#7753,.T.);+#7753=CIRCLE('',#7754,0.2);+#7754=AXIS2_PLACEMENT_3D('',#7712,#752,#5899);+#7755=ORIENTED_EDGE('',*,*,#3707,.T.);+#7756=PLANE('',#7757);+#7757=AXIS2_PLACEMENT_3D('',#7758,#752,#13);+#7758=CARTESIAN_POINT('',(7.414276639233,-4.78,0.410238158856));+#7759=ADVANCED_FACE('',(#7760),#7821,.T.);+#7760=FACE_BOUND('',#7761,.T.);+#7761=EDGE_LOOP('',(#7762,#7766,#7772,#7779,#7784,#7791,#7796,#7801,#7806,#7812,#7817,#3714));+#7762=ORIENTED_EDGE('',*,*,#7763,.F.);+#7763=EDGE_CURVE('',#6006,#3716,#7764,.T.);+#7764=LINE('',#7765,#1074);+#7765=CARTESIAN_POINT('',(7.,-5.22,0.630119079428));+#7766=ORIENTED_EDGE('',*,*,#7767,.T.);+#7767=EDGE_CURVE('',#6006,#7768,#7770,.T.);+#7768=VERTEX_POINT('',#7769);+#7769=CARTESIAN_POINT('',(7.2,-5.22,0.75));+#7770=LINE('',#7771,#49);+#7771=CARTESIAN_POINT('',(6.85,-5.22,0.75));+#7772=ORIENTED_EDGE('',*,*,#7773,.T.);+#7773=EDGE_CURVE('',#7768,#7774,#7776,.T.);+#7774=VERTEX_POINT('',#7775);+#7775=CARTESIAN_POINT('',(7.298480775301,-5.22,0.667364817767));+#7776=CIRCLE('',#7777,0.1);+#7777=AXIS2_PLACEMENT_3D('',#7778,#270,#5850);+#7778=CARTESIAN_POINT('',(7.2,-5.22,0.65));+#7779=ORIENTED_EDGE('',*,*,#7780,.T.);+#7780=EDGE_CURVE('',#7774,#7781,#7783,.T.);+#7781=VERTEX_POINT('',#7782);+#7782=CARTESIAN_POINT('',(7.382385590716,-5.22,0.165270364467));+#7783=LINE('',#7775,#5856);+#7784=ORIENTED_EDGE('',*,*,#7785,.T.);+#7785=EDGE_CURVE('',#7781,#7786,#7788,.T.);+#7786=VERTEX_POINT('',#7787);+#7787=CARTESIAN_POINT('',(7.579347141319,-5.22,1.387778780781E-16));+#7788=CIRCLE('',#7789,0.2);+#7789=AXIS2_PLACEMENT_3D('',#7790,#752,#5865);+#7790=CARTESIAN_POINT('',(7.579347141319,-5.22,0.2));+#7791=ORIENTED_EDGE('',*,*,#7792,.T.);+#7792=EDGE_CURVE('',#7786,#7793,#7795,.T.);+#7793=VERTEX_POINT('',#7794);+#7794=CARTESIAN_POINT('',(8.,-5.22,1.387778780781E-16));+#7795=LINE('',#7787,#49);+#7796=ORIENTED_EDGE('',*,*,#7797,.T.);+#7797=EDGE_CURVE('',#7793,#7798,#7800,.T.);+#7798=VERTEX_POINT('',#7799);+#7799=CARTESIAN_POINT('',(8.,-5.22,0.1));+#7800=LINE('',#7794,#1074);+#7801=ORIENTED_EDGE('',*,*,#7802,.T.);+#7802=EDGE_CURVE('',#7798,#7803,#7805,.T.);+#7803=VERTEX_POINT('',#7804);+#7804=CARTESIAN_POINT('',(7.579347141319,-5.22,0.1));+#7805=LINE('',#7799,#759);+#7806=ORIENTED_EDGE('',*,*,#7807,.T.);+#7807=EDGE_CURVE('',#7803,#7808,#7810,.T.);+#7808=VERTEX_POINT('',#7809);+#7809=CARTESIAN_POINT('',(7.480866366018,-5.22,0.182635182233));+#7810=CIRCLE('',#7811,1.E-01);+#7811=AXIS2_PLACEMENT_3D('',#7790,#270,#5887);+#7812=ORIENTED_EDGE('',*,*,#7813,.T.);+#7813=EDGE_CURVE('',#7808,#7814,#7816,.T.);+#7814=VERTEX_POINT('',#7815);+#7815=CARTESIAN_POINT('',(7.396961550602,-5.22,0.684729635533));+#7816=LINE('',#7809,#5893);+#7817=ORIENTED_EDGE('',*,*,#7818,.T.);+#7818=EDGE_CURVE('',#7814,#3711,#7819,.T.);+#7819=CIRCLE('',#7820,0.2);+#7820=AXIS2_PLACEMENT_3D('',#7778,#752,#5899);+#7821=PLANE('',#7822);+#7822=AXIS2_PLACEMENT_3D('',#7823,#752,#13);+#7823=CARTESIAN_POINT('',(7.414276639233,-5.22,0.410238158856));+#7824=ADVANCED_FACE('',(#7825),#7832,.T.);+#7825=FACE_BOUND('',#7826,.F.);+#7826=EDGE_LOOP('',(#7827,#7817,#7830,#7831));+#7827=ORIENTED_EDGE('',*,*,#7828,.T.);+#7828=EDGE_CURVE('',#7748,#7814,#7829,.T.);+#7829=LINE('',#7749,#751);+#7830=ORIENTED_EDGE('',*,*,#3710,.F.);+#7831=ORIENTED_EDGE('',*,*,#7752,.F.);+#7832=CYLINDRICAL_SURFACE('',#7833,0.2);+#7833=AXIS2_PLACEMENT_3D('',#7712,#270,#5899);+#7834=ADVANCED_FACE('',(#7835),#3262,.F.);+#7835=FACE_BOUND('',#7836,.F.);+#7836=EDGE_LOOP('',(#7762,#7837,#7838,#7842));+#7837=ORIENTED_EDGE('',*,*,#6005,.T.);+#7838=ORIENTED_EDGE('',*,*,#7839,.T.);+#7839=EDGE_CURVE('',#6002,#3731,#7840,.T.);+#7840=LINE('',#7841,#1074);+#7841=CARTESIAN_POINT('',(7.,-5.78,0.630119079428));+#7842=ORIENTED_EDGE('',*,*,#3730,.F.);+#7843=ADVANCED_FACE('',(#7844),#7903,.F.);+#7844=FACE_BOUND('',#7845,.F.);+#7845=EDGE_LOOP('',(#7846,#7847,#7853,#7860,#7865,#7872,#7877,#7882,#7887,#7893,#7898,#7902));+#7846=ORIENTED_EDGE('',*,*,#7839,.F.);+#7847=ORIENTED_EDGE('',*,*,#7848,.T.);+#7848=EDGE_CURVE('',#6002,#7849,#7851,.T.);+#7849=VERTEX_POINT('',#7850);+#7850=CARTESIAN_POINT('',(7.2,-5.78,0.75));+#7851=LINE('',#7852,#49);+#7852=CARTESIAN_POINT('',(6.85,-5.78,0.75));+#7853=ORIENTED_EDGE('',*,*,#7854,.T.);+#7854=EDGE_CURVE('',#7849,#7855,#7857,.T.);+#7855=VERTEX_POINT('',#7856);+#7856=CARTESIAN_POINT('',(7.298480775301,-5.78,0.667364817767));+#7857=CIRCLE('',#7858,0.1);+#7858=AXIS2_PLACEMENT_3D('',#7859,#270,#5850);+#7859=CARTESIAN_POINT('',(7.2,-5.78,0.65));+#7860=ORIENTED_EDGE('',*,*,#7861,.T.);+#7861=EDGE_CURVE('',#7855,#7862,#7864,.T.);+#7862=VERTEX_POINT('',#7863);+#7863=CARTESIAN_POINT('',(7.382385590716,-5.78,0.165270364467));+#7864=LINE('',#7856,#5856);+#7865=ORIENTED_EDGE('',*,*,#7866,.T.);+#7866=EDGE_CURVE('',#7862,#7867,#7869,.T.);+#7867=VERTEX_POINT('',#7868);+#7868=CARTESIAN_POINT('',(7.579347141319,-5.78,1.387778780781E-16));+#7869=CIRCLE('',#7870,0.2);+#7870=AXIS2_PLACEMENT_3D('',#7871,#752,#5865);+#7871=CARTESIAN_POINT('',(7.579347141319,-5.78,0.2));+#7872=ORIENTED_EDGE('',*,*,#7873,.T.);+#7873=EDGE_CURVE('',#7867,#7874,#7876,.T.);+#7874=VERTEX_POINT('',#7875);+#7875=CARTESIAN_POINT('',(8.,-5.78,1.387778780781E-16));+#7876=LINE('',#7868,#49);+#7877=ORIENTED_EDGE('',*,*,#7878,.T.);+#7878=EDGE_CURVE('',#7874,#7879,#7881,.T.);+#7879=VERTEX_POINT('',#7880);+#7880=CARTESIAN_POINT('',(8.,-5.78,0.1));+#7881=LINE('',#7875,#1074);+#7882=ORIENTED_EDGE('',*,*,#7883,.T.);+#7883=EDGE_CURVE('',#7879,#7884,#7886,.T.);+#7884=VERTEX_POINT('',#7885);+#7885=CARTESIAN_POINT('',(7.579347141319,-5.78,0.1));+#7886=LINE('',#7880,#759);+#7887=ORIENTED_EDGE('',*,*,#7888,.T.);+#7888=EDGE_CURVE('',#7884,#7889,#7891,.T.);+#7889=VERTEX_POINT('',#7890);+#7890=CARTESIAN_POINT('',(7.480866366018,-5.78,0.182635182233));+#7891=CIRCLE('',#7892,1.E-01);+#7892=AXIS2_PLACEMENT_3D('',#7871,#270,#5887);+#7893=ORIENTED_EDGE('',*,*,#7894,.T.);+#7894=EDGE_CURVE('',#7889,#7895,#7897,.T.);+#7895=VERTEX_POINT('',#7896);+#7896=CARTESIAN_POINT('',(7.396961550602,-5.78,0.684729635533));+#7897=LINE('',#7890,#5893);+#7898=ORIENTED_EDGE('',*,*,#7899,.T.);+#7899=EDGE_CURVE('',#7895,#3743,#7900,.T.);+#7900=CIRCLE('',#7901,0.2);+#7901=AXIS2_PLACEMENT_3D('',#7859,#752,#5899);+#7902=ORIENTED_EDGE('',*,*,#3742,.T.);+#7903=PLANE('',#7904);+#7904=AXIS2_PLACEMENT_3D('',#7905,#752,#13);+#7905=CARTESIAN_POINT('',(7.414276639233,-5.78,0.410238158856));+#7906=ADVANCED_FACE('',(#7907),#7968,.T.);+#7907=FACE_BOUND('',#7908,.T.);+#7908=EDGE_LOOP('',(#7909,#7913,#7919,#7926,#7931,#7938,#7943,#7948,#7953,#7959,#7964,#3749));+#7909=ORIENTED_EDGE('',*,*,#7910,.F.);+#7910=EDGE_CURVE('',#5998,#3751,#7911,.T.);+#7911=LINE('',#7912,#1074);+#7912=CARTESIAN_POINT('',(7.,-6.22,0.630119079428));+#7913=ORIENTED_EDGE('',*,*,#7914,.T.);+#7914=EDGE_CURVE('',#5998,#7915,#7917,.T.);+#7915=VERTEX_POINT('',#7916);+#7916=CARTESIAN_POINT('',(7.2,-6.22,0.75));+#7917=LINE('',#7918,#49);+#7918=CARTESIAN_POINT('',(6.85,-6.22,0.75));+#7919=ORIENTED_EDGE('',*,*,#7920,.T.);+#7920=EDGE_CURVE('',#7915,#7921,#7923,.T.);+#7921=VERTEX_POINT('',#7922);+#7922=CARTESIAN_POINT('',(7.298480775301,-6.22,0.667364817767));+#7923=CIRCLE('',#7924,0.1);+#7924=AXIS2_PLACEMENT_3D('',#7925,#270,#5850);+#7925=CARTESIAN_POINT('',(7.2,-6.22,0.65));+#7926=ORIENTED_EDGE('',*,*,#7927,.T.);+#7927=EDGE_CURVE('',#7921,#7928,#7930,.T.);+#7928=VERTEX_POINT('',#7929);+#7929=CARTESIAN_POINT('',(7.382385590716,-6.22,0.165270364467));+#7930=LINE('',#7922,#5856);+#7931=ORIENTED_EDGE('',*,*,#7932,.T.);+#7932=EDGE_CURVE('',#7928,#7933,#7935,.T.);+#7933=VERTEX_POINT('',#7934);+#7934=CARTESIAN_POINT('',(7.579347141319,-6.22,1.387778780781E-16));+#7935=CIRCLE('',#7936,0.2);+#7936=AXIS2_PLACEMENT_3D('',#7937,#752,#5865);+#7937=CARTESIAN_POINT('',(7.579347141319,-6.22,0.2));+#7938=ORIENTED_EDGE('',*,*,#7939,.T.);+#7939=EDGE_CURVE('',#7933,#7940,#7942,.T.);+#7940=VERTEX_POINT('',#7941);+#7941=CARTESIAN_POINT('',(8.,-6.22,1.387778780781E-16));+#7942=LINE('',#7934,#49);+#7943=ORIENTED_EDGE('',*,*,#7944,.T.);+#7944=EDGE_CURVE('',#7940,#7945,#7947,.T.);+#7945=VERTEX_POINT('',#7946);+#7946=CARTESIAN_POINT('',(8.,-6.22,0.1));+#7947=LINE('',#7941,#1074);+#7948=ORIENTED_EDGE('',*,*,#7949,.T.);+#7949=EDGE_CURVE('',#7945,#7950,#7952,.T.);+#7950=VERTEX_POINT('',#7951);+#7951=CARTESIAN_POINT('',(7.579347141319,-6.22,0.1));+#7952=LINE('',#7946,#759);+#7953=ORIENTED_EDGE('',*,*,#7954,.T.);+#7954=EDGE_CURVE('',#7950,#7955,#7957,.T.);+#7955=VERTEX_POINT('',#7956);+#7956=CARTESIAN_POINT('',(7.480866366018,-6.22,0.182635182233));+#7957=CIRCLE('',#7958,1.E-01);+#7958=AXIS2_PLACEMENT_3D('',#7937,#270,#5887);+#7959=ORIENTED_EDGE('',*,*,#7960,.T.);+#7960=EDGE_CURVE('',#7955,#7961,#7963,.T.);+#7961=VERTEX_POINT('',#7962);+#7962=CARTESIAN_POINT('',(7.396961550602,-6.22,0.684729635533));+#7963=LINE('',#7956,#5893);+#7964=ORIENTED_EDGE('',*,*,#7965,.T.);+#7965=EDGE_CURVE('',#7961,#3746,#7966,.T.);+#7966=CIRCLE('',#7967,0.2);+#7967=AXIS2_PLACEMENT_3D('',#7925,#752,#5899);+#7968=PLANE('',#7969);+#7969=AXIS2_PLACEMENT_3D('',#7970,#752,#13);+#7970=CARTESIAN_POINT('',(7.414276639233,-6.22,0.410238158856));+#7971=ADVANCED_FACE('',(#7972),#7979,.T.);+#7972=FACE_BOUND('',#7973,.F.);+#7973=EDGE_LOOP('',(#7974,#7964,#7977,#7978));+#7974=ORIENTED_EDGE('',*,*,#7975,.T.);+#7975=EDGE_CURVE('',#7895,#7961,#7976,.T.);+#7976=LINE('',#7896,#751);+#7977=ORIENTED_EDGE('',*,*,#3745,.F.);+#7978=ORIENTED_EDGE('',*,*,#7899,.F.);+#7979=CYLINDRICAL_SURFACE('',#7980,0.2);+#7980=AXIS2_PLACEMENT_3D('',#7859,#270,#5899);+#7981=ADVANCED_FACE('',(#7982),#8003,.F.);+#7982=FACE_BOUND('',#7983,.F.);+#7983=EDGE_LOOP('',(#7984,#7987,#7994,#7999,#8001,#8002));+#7984=ORIENTED_EDGE('',*,*,#7985,.F.);+#7985=EDGE_CURVE('',#7986,#3775,#3782,.T.);+#7986=VERTEX_POINT('',#3783);+#7987=ORIENTED_EDGE('',*,*,#7988,.T.);+#7988=EDGE_CURVE('',#7986,#7989,#7991,.T.);+#7989=VERTEX_POINT('',#7990);+#7990=CARTESIAN_POINT('',(5.78,-7.2,0.85));+#7991=LINE('',#3783,#7992);+#7992=VECTOR('',#7993,1.);+#7993=DIRECTION('',(-1.,1.110223024625E-16,0.));+#7994=ORIENTED_EDGE('',*,*,#7995,.T.);+#7995=EDGE_CURVE('',#7989,#7996,#7998,.T.);+#7996=VERTEX_POINT('',#7997);+#7997=CARTESIAN_POINT('',(5.78,-7.,0.85));+#7998=LINE('',#7990,#3784);+#7999=ORIENTED_EDGE('',*,*,#8000,.T.);+#8000=EDGE_CURVE('',#7996,#6119,#7998,.T.);+#8001=ORIENTED_EDGE('',*,*,#6118,.F.);+#8002=ORIENTED_EDGE('',*,*,#3779,.F.);+#8003=PLANE('',#8004);+#8004=AXIS2_PLACEMENT_3D('',#3783,#312,#3785);+#8005=ADVANCED_FACE('',(#8006),#8023,.F.);+#8006=FACE_BOUND('',#8007,.F.);+#8007=EDGE_LOOP('',(#8008,#8013,#8018,#8022));+#8008=ORIENTED_EDGE('',*,*,#8009,.F.);+#8009=EDGE_CURVE('',#8010,#3770,#8012,.T.);+#8010=VERTEX_POINT('',#8011);+#8011=CARTESIAN_POINT('',(6.825,-7.,0.75));+#8012=B_SPLINE_CURVE_WITH_KNOTS('',1,(#8011,#3771),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8013=ORIENTED_EDGE('',*,*,#8014,.T.);+#8014=EDGE_CURVE('',#8010,#8015,#8017,.T.);+#8015=VERTEX_POINT('',#8016);+#8016=CARTESIAN_POINT('',(6.22,-7.,0.75));+#8017=LINE('',#8011,#759);+#8018=ORIENTED_EDGE('',*,*,#8019,.T.);+#8019=EDGE_CURVE('',#8015,#3775,#8020,.T.);+#8020=LINE('',#8021,#1074);+#8021=CARTESIAN_POINT('',(6.22,-7.,0.630119079428));+#8022=ORIENTED_EDGE('',*,*,#3774,.F.);+#8023=PLANE('',#8024);+#8024=AXIS2_PLACEMENT_3D('',#3771,#270,#760);+#8025=ADVANCED_FACE('',(#8026),#8036,.F.);+#8026=FACE_BOUND('',#8027,.F.);+#8027=EDGE_LOOP('',(#8028,#8031,#8032,#8033));+#8028=ORIENTED_EDGE('',*,*,#8029,.T.);+#8029=EDGE_CURVE('',#5993,#8010,#8030,.T.);+#8030=LINE('',#5994,#3310);+#8031=ORIENTED_EDGE('',*,*,#8009,.T.);+#8032=ORIENTED_EDGE('',*,*,#3769,.F.);+#8033=ORIENTED_EDGE('',*,*,#8034,.F.);+#8034=EDGE_CURVE('',#5993,#3766,#8035,.T.);+#8035=B_SPLINE_CURVE_WITH_KNOTS('',1,(#5994,#3767),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8036=PLANE('',#8037);+#8037=AXIS2_PLACEMENT_3D('',#3767,#4217,#3279);+#8038=ADVANCED_FACE('',(#8039),#3262,.F.);+#8039=FACE_BOUND('',#8040,.F.);+#8040=EDGE_LOOP('',(#7909,#8041,#8042,#8043));+#8041=ORIENTED_EDGE('',*,*,#5997,.T.);+#8042=ORIENTED_EDGE('',*,*,#8034,.T.);+#8043=ORIENTED_EDGE('',*,*,#3765,.F.);+#8044=ADVANCED_FACE('',(#8045),#8060,.F.);+#8045=FACE_BOUND('',#8046,.T.);+#8046=EDGE_LOOP('',(#4650,#6104,#5984,#8047,#8052,#8057,#3995,#3904));+#8047=ORIENTED_EDGE('',*,*,#8048,.T.);+#8048=EDGE_CURVE('',#5988,#8049,#8051,.T.);+#8049=VERTEX_POINT('',#8050);+#8050=CARTESIAN_POINT('',(6.755919117457,-6.861838234914,0.1));+#8051=LINE('',#5989,#3310);+#8052=ORIENTED_EDGE('',*,*,#8053,.T.);+#8053=EDGE_CURVE('',#8049,#8054,#8056,.T.);+#8054=VERTEX_POINT('',#8055);+#8055=CARTESIAN_POINT('',(-6.755919117457,-6.861838234914,0.1));+#8056=LINE('',#8050,#759);+#8057=ORIENTED_EDGE('',*,*,#8058,.T.);+#8058=EDGE_CURVE('',#8054,#3997,#8059,.T.);+#8059=LINE('',#8055,#4216);+#8060=PLANE('',#8061);+#8061=AXIS2_PLACEMENT_3D('',#3909,#13,#8062);+#8062=DIRECTION('',(0.701585672444,-0.712585113668,0.));+#8063=ADVANCED_FACE('',(#8064),#8071,.F.);+#8064=FACE_BOUND('',#8065,.F.);+#8065=EDGE_LOOP('',(#8066,#3977,#8069,#8070));+#8066=ORIENTED_EDGE('',*,*,#8067,.T.);+#8067=EDGE_CURVE('',#4158,#3972,#8068,.T.);+#8068=LINE('',#4159,#1097);+#8069=ORIENTED_EDGE('',*,*,#4192,.F.);+#8070=ORIENTED_EDGE('',*,*,#4163,.F.);+#8071=PLANE('',#8072);+#8072=AXIS2_PLACEMENT_3D('',#4159,#8073,#3983);+#8073=DIRECTION('',(0.986322983713,-1.128587986944E-17,-0.16482406317));+#8074=ADVANCED_FACE('',(#8075),#8082,.F.);+#8075=FACE_BOUND('',#8076,.F.);+#8076=EDGE_LOOP('',(#8077,#3970,#8080,#8081));+#8077=ORIENTED_EDGE('',*,*,#8078,.T.);+#8078=EDGE_CURVE('',#4153,#3967,#8079,.T.);+#8079=LINE('',#4154,#1097);+#8080=ORIENTED_EDGE('',*,*,#8067,.F.);+#8081=ORIENTED_EDGE('',*,*,#4157,.F.);+#8082=CYLINDRICAL_SURFACE('',#4161,1.E-01);+#8083=ADVANCED_FACE('',(#8084),#8091,.F.);+#8084=FACE_BOUND('',#8085,.F.);+#8085=EDGE_LOOP('',(#8086,#3965,#8089,#8090));+#8086=ORIENTED_EDGE('',*,*,#8087,.T.);+#8087=EDGE_CURVE('',#4148,#3962,#8088,.T.);+#8088=LINE('',#4149,#1097);+#8089=ORIENTED_EDGE('',*,*,#8078,.F.);+#8090=ORIENTED_EDGE('',*,*,#4152,.F.);+#8091=PLANE('',#8092);+#8092=AXIS2_PLACEMENT_3D('',#4149,#312,#278);+#8093=ADVANCED_FACE('',(#8094),#8101,.F.);+#8094=FACE_BOUND('',#8095,.F.);+#8095=EDGE_LOOP('',(#8096,#3960,#8099,#8100));+#8096=ORIENTED_EDGE('',*,*,#8097,.T.);+#8097=EDGE_CURVE('',#4143,#3957,#8098,.T.);+#8098=LINE('',#4144,#1097);+#8099=ORIENTED_EDGE('',*,*,#8087,.F.);+#8100=ORIENTED_EDGE('',*,*,#4147,.F.);+#8101=PLANE('',#8102);+#8102=AXIS2_PLACEMENT_3D('',#4144,#278,#13);+#8103=ADVANCED_FACE('',(#8104),#8111,.F.);+#8104=FACE_BOUND('',#8105,.F.);+#8105=EDGE_LOOP('',(#8106,#3955,#8109,#8110));+#8106=ORIENTED_EDGE('',*,*,#8107,.T.);+#8107=EDGE_CURVE('',#4136,#3948,#8108,.T.);+#8108=LINE('',#4137,#1097);+#8109=ORIENTED_EDGE('',*,*,#8097,.F.);+#8110=ORIENTED_EDGE('',*,*,#4142,.F.);+#8111=PLANE('',#8112);+#8112=AXIS2_PLACEMENT_3D('',#4137,#13,#3929);+#8113=ADVANCED_FACE('',(#8114),#8121,.T.);+#8114=FACE_BOUND('',#8115,.F.);+#8115=EDGE_LOOP('',(#8116,#3946,#8119,#8120));+#8116=ORIENTED_EDGE('',*,*,#8117,.T.);+#8117=EDGE_CURVE('',#4131,#3941,#8118,.T.);+#8118=LINE('',#4132,#1097);+#8119=ORIENTED_EDGE('',*,*,#8107,.F.);+#8120=ORIENTED_EDGE('',*,*,#4135,.F.);+#8121=CYLINDRICAL_SURFACE('',#8122,0.2);+#8122=AXIS2_PLACEMENT_3D('',#4140,#3937,#3954);+#8123=ADVANCED_FACE('',(#8124),#8131,.F.);+#8124=FACE_BOUND('',#8125,.F.);+#8125=EDGE_LOOP('',(#8126,#3939,#8129,#8130));+#8126=ORIENTED_EDGE('',*,*,#8127,.T.);+#8127=EDGE_CURVE('',#4124,#3932,#8128,.T.);+#8128=LINE('',#4125,#1097);+#8129=ORIENTED_EDGE('',*,*,#8117,.F.);+#8130=ORIENTED_EDGE('',*,*,#4130,.F.);+#8131=PLANE('',#8132);+#8132=AXIS2_PLACEMENT_3D('',#4125,#8133,#3945);+#8133=DIRECTION('',(-0.986322983713,1.128587986944E-17,0.16482406317));+#8134=ADVANCED_FACE('',(#8135),#8142,.F.);+#8135=FACE_BOUND('',#8136,.F.);+#8136=EDGE_LOOP('',(#8137,#3930,#8140,#8141));+#8137=ORIENTED_EDGE('',*,*,#8138,.T.);+#8138=EDGE_CURVE('',#4118,#3924,#8139,.T.);+#8139=LINE('',#4119,#1097);+#8140=ORIENTED_EDGE('',*,*,#8127,.F.);+#8141=ORIENTED_EDGE('',*,*,#4123,.F.);+#8142=CYLINDRICAL_SURFACE('',#4127,0.1);+#8143=ADVANCED_FACE('',(#8144),#8149,.F.);+#8144=FACE_BOUND('',#8145,.F.);+#8145=EDGE_LOOP('',(#8146,#8147,#3922,#8148));+#8146=ORIENTED_EDGE('',*,*,#4117,.F.);+#8147=ORIENTED_EDGE('',*,*,#4003,.T.);+#8148=ORIENTED_EDGE('',*,*,#8138,.F.);+#8149=PLANE('',#8150);+#8150=AXIS2_PLACEMENT_3D('',#4121,#13,#3929);+#8151=ADVANCED_FACE('',(#8152),#1081,.F.);+#8152=FACE_BOUND('',#8153,.F.);+#8153=EDGE_LOOP('',(#8154,#8157,#8158,#8162));+#8154=ORIENTED_EDGE('',*,*,#8155,.F.);+#8155=EDGE_CURVE('',#4104,#4203,#8156,.T.);+#8156=B_SPLINE_CURVE_WITH_KNOTS('',1,(#1078,#282),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8157=ORIENTED_EDGE('',*,*,#4103,.T.);+#8158=ORIENTED_EDGE('',*,*,#8159,.T.);+#8159=EDGE_CURVE('',#4100,#4204,#8160,.T.);+#8160=LINE('',#8161,#1074);+#8161=CARTESIAN_POINT('',(-7.,-6.22,0.630119079428));+#8162=ORIENTED_EDGE('',*,*,#4202,.F.);+#8163=ADVANCED_FACE('',(#8164),#8182,.F.);+#8164=FACE_BOUND('',#8165,.F.);+#8165=EDGE_LOOP('',(#8166,#8172,#8173,#8179));+#8166=ORIENTED_EDGE('',*,*,#8167,.F.);+#8167=EDGE_CURVE('',#4100,#8168,#8170,.T.);+#8168=VERTEX_POINT('',#8169);+#8169=CARTESIAN_POINT('',(-7.2,-6.22,0.75));+#8170=LINE('',#8171,#3928);+#8171=CARTESIAN_POINT('',(-6.85,-6.22,0.75));+#8172=ORIENTED_EDGE('',*,*,#4099,.T.);+#8173=ORIENTED_EDGE('',*,*,#8174,.T.);+#8174=EDGE_CURVE('',#4096,#8175,#8177,.T.);+#8175=VERTEX_POINT('',#8176);+#8176=CARTESIAN_POINT('',(-7.2,-5.78,0.75));+#8177=LINE('',#8178,#3928);+#8178=CARTESIAN_POINT('',(-6.85,-5.78,0.75));+#8179=ORIENTED_EDGE('',*,*,#8180,.F.);+#8180=EDGE_CURVE('',#8168,#8175,#8181,.T.);+#8181=LINE('',#8169,#1097);+#8182=PLANE('',#8183);+#8183=AXIS2_PLACEMENT_3D('',#8171,#13,#3929);+#8184=ADVANCED_FACE('',(#8185),#1081,.F.);+#8185=FACE_BOUND('',#8186,.F.);+#8186=EDGE_LOOP('',(#8187,#8191,#8192,#8196));+#8187=ORIENTED_EDGE('',*,*,#8188,.F.);+#8188=EDGE_CURVE('',#4096,#4248,#8189,.T.);+#8189=LINE('',#8190,#1074);+#8190=CARTESIAN_POINT('',(-7.,-5.78,0.630119079428));+#8191=ORIENTED_EDGE('',*,*,#4095,.T.);+#8192=ORIENTED_EDGE('',*,*,#8193,.T.);+#8193=EDGE_CURVE('',#4092,#4262,#8194,.T.);+#8194=LINE('',#8195,#1074);+#8195=CARTESIAN_POINT('',(-7.,-5.22,0.630119079428));+#8196=ORIENTED_EDGE('',*,*,#4261,.F.);+#8197=ADVANCED_FACE('',(#8198),#8216,.F.);+#8198=FACE_BOUND('',#8199,.F.);+#8199=EDGE_LOOP('',(#8200,#8206,#8207,#8213));+#8200=ORIENTED_EDGE('',*,*,#8201,.F.);+#8201=EDGE_CURVE('',#4092,#8202,#8204,.T.);+#8202=VERTEX_POINT('',#8203);+#8203=CARTESIAN_POINT('',(-7.2,-5.22,0.75));+#8204=LINE('',#8205,#3928);+#8205=CARTESIAN_POINT('',(-6.85,-5.22,0.75));+#8206=ORIENTED_EDGE('',*,*,#4091,.T.);+#8207=ORIENTED_EDGE('',*,*,#8208,.T.);+#8208=EDGE_CURVE('',#4088,#8209,#8211,.T.);+#8209=VERTEX_POINT('',#8210);+#8210=CARTESIAN_POINT('',(-7.2,-4.78,0.75));+#8211=LINE('',#8212,#3928);+#8212=CARTESIAN_POINT('',(-6.85,-4.78,0.75));+#8213=ORIENTED_EDGE('',*,*,#8214,.F.);+#8214=EDGE_CURVE('',#8202,#8209,#8215,.T.);+#8215=LINE('',#8203,#1097);+#8216=PLANE('',#8217);+#8217=AXIS2_PLACEMENT_3D('',#8205,#13,#3929);+#8218=ADVANCED_FACE('',(#8219),#1081,.F.);+#8219=FACE_BOUND('',#8220,.F.);+#8220=EDGE_LOOP('',(#8221,#8225,#8226,#8230));+#8221=ORIENTED_EDGE('',*,*,#8222,.F.);+#8222=EDGE_CURVE('',#4088,#4283,#8223,.T.);+#8223=LINE('',#8224,#1074);+#8224=CARTESIAN_POINT('',(-7.,-4.78,0.630119079428));+#8225=ORIENTED_EDGE('',*,*,#4087,.T.);+#8226=ORIENTED_EDGE('',*,*,#8227,.T.);+#8227=EDGE_CURVE('',#4084,#4297,#8228,.T.);+#8228=LINE('',#8229,#1074);+#8229=CARTESIAN_POINT('',(-7.,-4.22,0.630119079428));+#8230=ORIENTED_EDGE('',*,*,#4296,.F.);+#8231=ADVANCED_FACE('',(#8232),#8250,.F.);+#8232=FACE_BOUND('',#8233,.F.);+#8233=EDGE_LOOP('',(#8234,#8240,#8241,#8247));+#8234=ORIENTED_EDGE('',*,*,#8235,.F.);+#8235=EDGE_CURVE('',#4084,#8236,#8238,.T.);+#8236=VERTEX_POINT('',#8237);+#8237=CARTESIAN_POINT('',(-7.2,-4.22,0.75));+#8238=LINE('',#8239,#3928);+#8239=CARTESIAN_POINT('',(-6.85,-4.22,0.75));+#8240=ORIENTED_EDGE('',*,*,#4083,.T.);+#8241=ORIENTED_EDGE('',*,*,#8242,.T.);+#8242=EDGE_CURVE('',#4080,#8243,#8245,.T.);+#8243=VERTEX_POINT('',#8244);+#8244=CARTESIAN_POINT('',(-7.2,-3.78,0.75));+#8245=LINE('',#8246,#3928);+#8246=CARTESIAN_POINT('',(-6.85,-3.78,0.75));+#8247=ORIENTED_EDGE('',*,*,#8248,.F.);+#8248=EDGE_CURVE('',#8236,#8243,#8249,.T.);+#8249=LINE('',#8237,#1097);+#8250=PLANE('',#8251);+#8251=AXIS2_PLACEMENT_3D('',#8239,#13,#3929);+#8252=ADVANCED_FACE('',(#8253),#1081,.F.);+#8253=FACE_BOUND('',#8254,.F.);+#8254=EDGE_LOOP('',(#8255,#8259,#8260,#8264));+#8255=ORIENTED_EDGE('',*,*,#8256,.F.);+#8256=EDGE_CURVE('',#4080,#4318,#8257,.T.);+#8257=LINE('',#8258,#1074);+#8258=CARTESIAN_POINT('',(-7.,-3.78,0.630119079428));+#8259=ORIENTED_EDGE('',*,*,#4079,.T.);+#8260=ORIENTED_EDGE('',*,*,#8261,.T.);+#8261=EDGE_CURVE('',#4076,#4332,#8262,.T.);+#8262=LINE('',#8263,#1074);+#8263=CARTESIAN_POINT('',(-7.,-3.22,0.630119079428));+#8264=ORIENTED_EDGE('',*,*,#4331,.F.);+#8265=ADVANCED_FACE('',(#8266),#8284,.F.);+#8266=FACE_BOUND('',#8267,.F.);+#8267=EDGE_LOOP('',(#8268,#8274,#8275,#8281));+#8268=ORIENTED_EDGE('',*,*,#8269,.F.);+#8269=EDGE_CURVE('',#4076,#8270,#8272,.T.);+#8270=VERTEX_POINT('',#8271);+#8271=CARTESIAN_POINT('',(-7.2,-3.22,0.75));+#8272=LINE('',#8273,#3928);+#8273=CARTESIAN_POINT('',(-6.85,-3.22,0.75));+#8274=ORIENTED_EDGE('',*,*,#4075,.T.);+#8275=ORIENTED_EDGE('',*,*,#8276,.T.);+#8276=EDGE_CURVE('',#4072,#8277,#8279,.T.);+#8277=VERTEX_POINT('',#8278);+#8278=CARTESIAN_POINT('',(-7.2,-2.78,0.75));+#8279=LINE('',#8280,#3928);+#8280=CARTESIAN_POINT('',(-6.85,-2.78,0.75));+#8281=ORIENTED_EDGE('',*,*,#8282,.F.);+#8282=EDGE_CURVE('',#8270,#8277,#8283,.T.);+#8283=LINE('',#8271,#1097);+#8284=PLANE('',#8285);+#8285=AXIS2_PLACEMENT_3D('',#8273,#13,#3929);+#8286=ADVANCED_FACE('',(#8287),#1081,.F.);+#8287=FACE_BOUND('',#8288,.F.);+#8288=EDGE_LOOP('',(#8289,#8293,#8294,#8298));+#8289=ORIENTED_EDGE('',*,*,#8290,.F.);+#8290=EDGE_CURVE('',#4072,#4353,#8291,.T.);+#8291=LINE('',#8292,#1074);+#8292=CARTESIAN_POINT('',(-7.,-2.78,0.630119079428));+#8293=ORIENTED_EDGE('',*,*,#4071,.T.);+#8294=ORIENTED_EDGE('',*,*,#8295,.T.);+#8295=EDGE_CURVE('',#4068,#4367,#8296,.T.);+#8296=LINE('',#8297,#1074);+#8297=CARTESIAN_POINT('',(-7.,-2.22,0.630119079428));+#8298=ORIENTED_EDGE('',*,*,#4366,.F.);+#8299=ADVANCED_FACE('',(#8300),#8318,.F.);+#8300=FACE_BOUND('',#8301,.F.);+#8301=EDGE_LOOP('',(#8302,#8308,#8309,#8315));+#8302=ORIENTED_EDGE('',*,*,#8303,.F.);+#8303=EDGE_CURVE('',#4068,#8304,#8306,.T.);+#8304=VERTEX_POINT('',#8305);+#8305=CARTESIAN_POINT('',(-7.2,-2.22,0.75));+#8306=LINE('',#8307,#3928);+#8307=CARTESIAN_POINT('',(-6.85,-2.22,0.75));+#8308=ORIENTED_EDGE('',*,*,#4067,.T.);+#8309=ORIENTED_EDGE('',*,*,#8310,.T.);+#8310=EDGE_CURVE('',#4064,#8311,#8313,.T.);+#8311=VERTEX_POINT('',#8312);+#8312=CARTESIAN_POINT('',(-7.2,-1.78,0.75));+#8313=LINE('',#8314,#3928);+#8314=CARTESIAN_POINT('',(-6.85,-1.78,0.75));+#8315=ORIENTED_EDGE('',*,*,#8316,.F.);+#8316=EDGE_CURVE('',#8304,#8311,#8317,.T.);+#8317=LINE('',#8305,#1097);+#8318=PLANE('',#8319);+#8319=AXIS2_PLACEMENT_3D('',#8307,#13,#3929);+#8320=ADVANCED_FACE('',(#8321),#1081,.F.);+#8321=FACE_BOUND('',#8322,.F.);+#8322=EDGE_LOOP('',(#8323,#8327,#8328,#8332));+#8323=ORIENTED_EDGE('',*,*,#8324,.F.);+#8324=EDGE_CURVE('',#4064,#4388,#8325,.T.);+#8325=LINE('',#8326,#1074);+#8326=CARTESIAN_POINT('',(-7.,-1.78,0.630119079428));+#8327=ORIENTED_EDGE('',*,*,#4063,.T.);+#8328=ORIENTED_EDGE('',*,*,#8329,.T.);+#8329=EDGE_CURVE('',#4060,#4402,#8330,.T.);+#8330=LINE('',#8331,#1074);+#8331=CARTESIAN_POINT('',(-7.,-1.22,0.630119079428));+#8332=ORIENTED_EDGE('',*,*,#4401,.F.);+#8333=ADVANCED_FACE('',(#8334),#8352,.F.);+#8334=FACE_BOUND('',#8335,.F.);+#8335=EDGE_LOOP('',(#8336,#8342,#8343,#8349));+#8336=ORIENTED_EDGE('',*,*,#8337,.F.);+#8337=EDGE_CURVE('',#4060,#8338,#8340,.T.);+#8338=VERTEX_POINT('',#8339);+#8339=CARTESIAN_POINT('',(-7.2,-1.22,0.75));+#8340=LINE('',#8341,#3928);+#8341=CARTESIAN_POINT('',(-6.85,-1.22,0.75));+#8342=ORIENTED_EDGE('',*,*,#4059,.T.);+#8343=ORIENTED_EDGE('',*,*,#8344,.T.);+#8344=EDGE_CURVE('',#4056,#8345,#8347,.T.);+#8345=VERTEX_POINT('',#8346);+#8346=CARTESIAN_POINT('',(-7.2,-0.78,0.75));+#8347=LINE('',#8348,#3928);+#8348=CARTESIAN_POINT('',(-6.85,-0.78,0.75));+#8349=ORIENTED_EDGE('',*,*,#8350,.F.);+#8350=EDGE_CURVE('',#8338,#8345,#8351,.T.);+#8351=LINE('',#8339,#1097);+#8352=PLANE('',#8353);+#8353=AXIS2_PLACEMENT_3D('',#8341,#13,#3929);+#8354=ADVANCED_FACE('',(#8355),#1081,.F.);+#8355=FACE_BOUND('',#8356,.F.);+#8356=EDGE_LOOP('',(#8357,#8361,#8362,#8366));+#8357=ORIENTED_EDGE('',*,*,#8358,.F.);+#8358=EDGE_CURVE('',#4056,#4423,#8359,.T.);+#8359=LINE('',#8360,#1074);+#8360=CARTESIAN_POINT('',(-7.,-0.78,0.630119079428));+#8361=ORIENTED_EDGE('',*,*,#4055,.T.);+#8362=ORIENTED_EDGE('',*,*,#8363,.T.);+#8363=EDGE_CURVE('',#4052,#4437,#8364,.T.);+#8364=LINE('',#8365,#1074);+#8365=CARTESIAN_POINT('',(-7.,-0.22,0.630119079428));+#8366=ORIENTED_EDGE('',*,*,#4436,.F.);+#8367=ADVANCED_FACE('',(#8368),#8386,.F.);+#8368=FACE_BOUND('',#8369,.F.);+#8369=EDGE_LOOP('',(#8370,#8376,#8377,#8383));+#8370=ORIENTED_EDGE('',*,*,#8371,.F.);+#8371=EDGE_CURVE('',#4052,#8372,#8374,.T.);+#8372=VERTEX_POINT('',#8373);+#8373=CARTESIAN_POINT('',(-7.2,-0.22,0.75));+#8374=LINE('',#8375,#3928);+#8375=CARTESIAN_POINT('',(-6.85,-0.22,0.75));+#8376=ORIENTED_EDGE('',*,*,#4051,.T.);+#8377=ORIENTED_EDGE('',*,*,#8378,.T.);+#8378=EDGE_CURVE('',#4048,#8379,#8381,.T.);+#8379=VERTEX_POINT('',#8380);+#8380=CARTESIAN_POINT('',(-7.2,0.22,0.75));+#8381=LINE('',#8382,#3928);+#8382=CARTESIAN_POINT('',(-6.85,0.22,0.75));+#8383=ORIENTED_EDGE('',*,*,#8384,.F.);+#8384=EDGE_CURVE('',#8372,#8379,#8385,.T.);+#8385=LINE('',#8373,#1097);+#8386=PLANE('',#8387);+#8387=AXIS2_PLACEMENT_3D('',#8375,#13,#3929);+#8388=ADVANCED_FACE('',(#8389),#1081,.F.);+#8389=FACE_BOUND('',#8390,.F.);+#8390=EDGE_LOOP('',(#8391,#8395,#8396,#8400));+#8391=ORIENTED_EDGE('',*,*,#8392,.F.);+#8392=EDGE_CURVE('',#4048,#4458,#8393,.T.);+#8393=LINE('',#8394,#1074);+#8394=CARTESIAN_POINT('',(-7.,0.22,0.630119079428));+#8395=ORIENTED_EDGE('',*,*,#4047,.T.);+#8396=ORIENTED_EDGE('',*,*,#8397,.T.);+#8397=EDGE_CURVE('',#4044,#4472,#8398,.T.);+#8398=LINE('',#8399,#1074);+#8399=CARTESIAN_POINT('',(-7.,0.78,0.630119079428));+#8400=ORIENTED_EDGE('',*,*,#4471,.F.);+#8401=ADVANCED_FACE('',(#8402),#8420,.F.);+#8402=FACE_BOUND('',#8403,.F.);+#8403=EDGE_LOOP('',(#8404,#8410,#8411,#8417));+#8404=ORIENTED_EDGE('',*,*,#8405,.F.);+#8405=EDGE_CURVE('',#4044,#8406,#8408,.T.);+#8406=VERTEX_POINT('',#8407);+#8407=CARTESIAN_POINT('',(-7.2,0.78,0.75));+#8408=LINE('',#8409,#3928);+#8409=CARTESIAN_POINT('',(-6.85,0.78,0.75));+#8410=ORIENTED_EDGE('',*,*,#4043,.T.);+#8411=ORIENTED_EDGE('',*,*,#8412,.T.);+#8412=EDGE_CURVE('',#4040,#8413,#8415,.T.);+#8413=VERTEX_POINT('',#8414);+#8414=CARTESIAN_POINT('',(-7.2,1.22,0.75));+#8415=LINE('',#8416,#3928);+#8416=CARTESIAN_POINT('',(-6.85,1.22,0.75));+#8417=ORIENTED_EDGE('',*,*,#8418,.F.);+#8418=EDGE_CURVE('',#8406,#8413,#8419,.T.);+#8419=LINE('',#8407,#1097);+#8420=PLANE('',#8421);+#8421=AXIS2_PLACEMENT_3D('',#8409,#13,#3929);+#8422=ADVANCED_FACE('',(#8423),#1081,.F.);+#8423=FACE_BOUND('',#8424,.F.);+#8424=EDGE_LOOP('',(#8425,#8429,#8430,#8434));+#8425=ORIENTED_EDGE('',*,*,#8426,.F.);+#8426=EDGE_CURVE('',#4040,#4493,#8427,.T.);+#8427=LINE('',#8428,#1074);+#8428=CARTESIAN_POINT('',(-7.,1.22,0.630119079428));+#8429=ORIENTED_EDGE('',*,*,#4039,.T.);+#8430=ORIENTED_EDGE('',*,*,#8431,.T.);+#8431=EDGE_CURVE('',#4036,#4507,#8432,.T.);+#8432=LINE('',#8433,#1074);+#8433=CARTESIAN_POINT('',(-7.,1.78,0.630119079428));+#8434=ORIENTED_EDGE('',*,*,#4506,.F.);+#8435=ADVANCED_FACE('',(#8436),#8454,.F.);+#8436=FACE_BOUND('',#8437,.F.);+#8437=EDGE_LOOP('',(#8438,#8444,#8445,#8451));+#8438=ORIENTED_EDGE('',*,*,#8439,.F.);+#8439=EDGE_CURVE('',#4036,#8440,#8442,.T.);+#8440=VERTEX_POINT('',#8441);+#8441=CARTESIAN_POINT('',(-7.2,1.78,0.75));+#8442=LINE('',#8443,#3928);+#8443=CARTESIAN_POINT('',(-6.85,1.78,0.75));+#8444=ORIENTED_EDGE('',*,*,#4035,.T.);+#8445=ORIENTED_EDGE('',*,*,#8446,.T.);+#8446=EDGE_CURVE('',#4032,#8447,#8449,.T.);+#8447=VERTEX_POINT('',#8448);+#8448=CARTESIAN_POINT('',(-7.2,2.22,0.75));+#8449=LINE('',#8450,#3928);+#8450=CARTESIAN_POINT('',(-6.85,2.22,0.75));+#8451=ORIENTED_EDGE('',*,*,#8452,.F.);+#8452=EDGE_CURVE('',#8440,#8447,#8453,.T.);+#8453=LINE('',#8441,#1097);+#8454=PLANE('',#8455);+#8455=AXIS2_PLACEMENT_3D('',#8443,#13,#3929);+#8456=ADVANCED_FACE('',(#8457),#1081,.F.);+#8457=FACE_BOUND('',#8458,.F.);+#8458=EDGE_LOOP('',(#8459,#8463,#8464,#8468));+#8459=ORIENTED_EDGE('',*,*,#8460,.F.);+#8460=EDGE_CURVE('',#4032,#4528,#8461,.T.);+#8461=LINE('',#8462,#1074);+#8462=CARTESIAN_POINT('',(-7.,2.22,0.630119079428));+#8463=ORIENTED_EDGE('',*,*,#4031,.T.);+#8464=ORIENTED_EDGE('',*,*,#8465,.T.);+#8465=EDGE_CURVE('',#4028,#4542,#8466,.T.);+#8466=LINE('',#8467,#1074);+#8467=CARTESIAN_POINT('',(-7.,2.78,0.630119079428));+#8468=ORIENTED_EDGE('',*,*,#4541,.F.);+#8469=ADVANCED_FACE('',(#8470),#8488,.F.);+#8470=FACE_BOUND('',#8471,.F.);+#8471=EDGE_LOOP('',(#8472,#8478,#8479,#8485));+#8472=ORIENTED_EDGE('',*,*,#8473,.F.);+#8473=EDGE_CURVE('',#4028,#8474,#8476,.T.);+#8474=VERTEX_POINT('',#8475);+#8475=CARTESIAN_POINT('',(-7.2,2.78,0.75));+#8476=LINE('',#8477,#3928);+#8477=CARTESIAN_POINT('',(-6.85,2.78,0.75));+#8478=ORIENTED_EDGE('',*,*,#4027,.T.);+#8479=ORIENTED_EDGE('',*,*,#8480,.T.);+#8480=EDGE_CURVE('',#4024,#8481,#8483,.T.);+#8481=VERTEX_POINT('',#8482);+#8482=CARTESIAN_POINT('',(-7.2,3.22,0.75));+#8483=LINE('',#8484,#3928);+#8484=CARTESIAN_POINT('',(-6.85,3.22,0.75));+#8485=ORIENTED_EDGE('',*,*,#8486,.F.);+#8486=EDGE_CURVE('',#8474,#8481,#8487,.T.);+#8487=LINE('',#8475,#1097);+#8488=PLANE('',#8489);+#8489=AXIS2_PLACEMENT_3D('',#8477,#13,#3929);+#8490=ADVANCED_FACE('',(#8491),#1081,.F.);+#8491=FACE_BOUND('',#8492,.F.);+#8492=EDGE_LOOP('',(#8493,#8497,#8498,#8502));+#8493=ORIENTED_EDGE('',*,*,#8494,.F.);+#8494=EDGE_CURVE('',#4024,#4563,#8495,.T.);+#8495=LINE('',#8496,#1074);+#8496=CARTESIAN_POINT('',(-7.,3.22,0.630119079428));+#8497=ORIENTED_EDGE('',*,*,#4023,.T.);+#8498=ORIENTED_EDGE('',*,*,#8499,.T.);+#8499=EDGE_CURVE('',#4020,#4577,#8500,.T.);+#8500=LINE('',#8501,#1074);+#8501=CARTESIAN_POINT('',(-7.,3.78,0.630119079428));+#8502=ORIENTED_EDGE('',*,*,#4576,.F.);+#8503=ADVANCED_FACE('',(#8504),#8522,.F.);+#8504=FACE_BOUND('',#8505,.F.);+#8505=EDGE_LOOP('',(#8506,#8512,#8513,#8519));+#8506=ORIENTED_EDGE('',*,*,#8507,.F.);+#8507=EDGE_CURVE('',#4020,#8508,#8510,.T.);+#8508=VERTEX_POINT('',#8509);+#8509=CARTESIAN_POINT('',(-7.2,3.78,0.75));+#8510=LINE('',#8511,#3928);+#8511=CARTESIAN_POINT('',(-6.85,3.78,0.75));+#8512=ORIENTED_EDGE('',*,*,#4019,.T.);+#8513=ORIENTED_EDGE('',*,*,#8514,.T.);+#8514=EDGE_CURVE('',#4016,#8515,#8517,.T.);+#8515=VERTEX_POINT('',#8516);+#8516=CARTESIAN_POINT('',(-7.2,4.22,0.75));+#8517=LINE('',#8518,#3928);+#8518=CARTESIAN_POINT('',(-6.85,4.22,0.75));+#8519=ORIENTED_EDGE('',*,*,#8520,.F.);+#8520=EDGE_CURVE('',#8508,#8515,#8521,.T.);+#8521=LINE('',#8509,#1097);+#8522=PLANE('',#8523);+#8523=AXIS2_PLACEMENT_3D('',#8511,#13,#3929);+#8524=ADVANCED_FACE('',(#8525),#1081,.F.);+#8525=FACE_BOUND('',#8526,.F.);+#8526=EDGE_LOOP('',(#8527,#8531,#8532,#8536));+#8527=ORIENTED_EDGE('',*,*,#8528,.F.);+#8528=EDGE_CURVE('',#4016,#4598,#8529,.T.);+#8529=LINE('',#8530,#1074);+#8530=CARTESIAN_POINT('',(-7.,4.22,0.630119079428));+#8531=ORIENTED_EDGE('',*,*,#4015,.T.);+#8532=ORIENTED_EDGE('',*,*,#8533,.T.);+#8533=EDGE_CURVE('',#4012,#4612,#8534,.T.);+#8534=LINE('',#8535,#1074);+#8535=CARTESIAN_POINT('',(-7.,4.78,0.630119079428));+#8536=ORIENTED_EDGE('',*,*,#4611,.F.);+#8537=ADVANCED_FACE('',(#8538),#8556,.F.);+#8538=FACE_BOUND('',#8539,.F.);+#8539=EDGE_LOOP('',(#8540,#8546,#8547,#8553));+#8540=ORIENTED_EDGE('',*,*,#8541,.F.);+#8541=EDGE_CURVE('',#4012,#8542,#8544,.T.);+#8542=VERTEX_POINT('',#8543);+#8543=CARTESIAN_POINT('',(-7.2,4.78,0.75));+#8544=LINE('',#8545,#3928);+#8545=CARTESIAN_POINT('',(-6.85,4.78,0.75));+#8546=ORIENTED_EDGE('',*,*,#4011,.T.);+#8547=ORIENTED_EDGE('',*,*,#8548,.T.);+#8548=EDGE_CURVE('',#4008,#8549,#8551,.T.);+#8549=VERTEX_POINT('',#8550);+#8550=CARTESIAN_POINT('',(-7.2,5.22,0.75));+#8551=LINE('',#8552,#3928);+#8552=CARTESIAN_POINT('',(-6.85,5.22,0.75));+#8553=ORIENTED_EDGE('',*,*,#8554,.F.);+#8554=EDGE_CURVE('',#8542,#8549,#8555,.T.);+#8555=LINE('',#8543,#1097);+#8556=PLANE('',#8557);+#8557=AXIS2_PLACEMENT_3D('',#8545,#13,#3929);+#8558=ADVANCED_FACE('',(#8559),#1081,.F.);+#8559=FACE_BOUND('',#8560,.F.);+#8560=EDGE_LOOP('',(#8561,#8565,#8566,#8567));+#8561=ORIENTED_EDGE('',*,*,#8562,.F.);+#8562=EDGE_CURVE('',#4008,#4180,#8563,.T.);+#8563=LINE('',#8564,#1074);+#8564=CARTESIAN_POINT('',(-7.,5.22,0.630119079428));+#8565=ORIENTED_EDGE('',*,*,#4007,.T.);+#8566=ORIENTED_EDGE('',*,*,#4113,.T.);+#8567=ORIENTED_EDGE('',*,*,#4179,.F.);+#8568=ADVANCED_FACE('',(#8569),#8580,.F.);+#8569=FACE_BOUND('',#8570,.F.);+#8570=EDGE_LOOP('',(#8057,#8571,#8572,#8577));+#8571=ORIENTED_EDGE('',*,*,#4106,.T.);+#8572=ORIENTED_EDGE('',*,*,#8573,.F.);+#8573=EDGE_CURVE('',#8574,#4104,#8576,.T.);+#8574=VERTEX_POINT('',#8575);+#8575=CARTESIAN_POINT('',(-6.825,-7.,0.75));+#8576=LINE('',#8575,#4216);+#8577=ORIENTED_EDGE('',*,*,#8578,.F.);+#8578=EDGE_CURVE('',#8054,#8574,#8579,.T.);+#8579=B_SPLINE_CURVE_WITH_KNOTS('',1,(#8055,#8575),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8580=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#8055,#8575),(#3998,#1078)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8581=ADVANCED_FACE('',(#8582),#8590,.F.);+#8582=FACE_BOUND('',#8583,.F.);+#8583=EDGE_LOOP('',(#8584,#8585,#8586,#8587));+#8584=ORIENTED_EDGE('',*,*,#8573,.T.);+#8585=ORIENTED_EDGE('',*,*,#8155,.T.);+#8586=ORIENTED_EDGE('',*,*,#4233,.F.);+#8587=ORIENTED_EDGE('',*,*,#8588,.F.);+#8588=EDGE_CURVE('',#8574,#4230,#8589,.T.);+#8589=B_SPLINE_CURVE_WITH_KNOTS('',1,(#8575,#4231),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#8590=PLANE('',#8591);+#8591=AXIS2_PLACEMENT_3D('',#4231,#245,#4217);+#8592=ADVANCED_FACE('',(#8593),#8023,.F.);+#8593=FACE_BOUND('',#8594,.F.);+#8594=EDGE_LOOP('',(#8595,#8601,#8603,#8604));+#8595=ORIENTED_EDGE('',*,*,#8596,.F.);+#8596=EDGE_CURVE('',#8597,#4224,#8599,.T.);+#8597=VERTEX_POINT('',#8598);+#8598=CARTESIAN_POINT('',(-6.22,-7.,0.75));+#8599=LINE('',#8600,#1074);+#8600=CARTESIAN_POINT('',(-6.22,-7.,0.630119079428));+#8601=ORIENTED_EDGE('',*,*,#8602,.T.);+#8602=EDGE_CURVE('',#8597,#8574,#8017,.T.);+#8603=ORIENTED_EDGE('',*,*,#8588,.T.);+#8604=ORIENTED_EDGE('',*,*,#4229,.F.);+#8605=ADVANCED_FACE('',(#8606),#8625,.F.);+#8606=FACE_BOUND('',#8607,.F.);+#8607=EDGE_LOOP('',(#8608,#8615,#8619,#8621,#8622,#8623));+#8608=ORIENTED_EDGE('',*,*,#8609,.F.);+#8609=EDGE_CURVE('',#8610,#8612,#8614,.T.);+#8610=VERTEX_POINT('',#8611);+#8611=CARTESIAN_POINT('',(-5.78,-7.2,0.85));+#8612=VERTEX_POINT('',#8613);+#8613=CARTESIAN_POINT('',(-5.78,-7.,0.85));+#8614=LINE('',#8611,#3784);+#8615=ORIENTED_EDGE('',*,*,#8616,.T.);+#8616=EDGE_CURVE('',#8610,#8617,#8618,.T.);+#8617=VERTEX_POINT('',#4227);+#8618=LINE('',#8611,#7992);+#8619=ORIENTED_EDGE('',*,*,#8620,.T.);+#8620=EDGE_CURVE('',#8617,#4224,#4226,.T.);+#8621=ORIENTED_EDGE('',*,*,#4223,.T.);+#8622=ORIENTED_EDGE('',*,*,#6214,.F.);+#8623=ORIENTED_EDGE('',*,*,#8624,.F.);+#8624=EDGE_CURVE('',#8612,#6211,#8614,.T.);+#8625=PLANE('',#8626);+#8626=AXIS2_PLACEMENT_3D('',#8611,#312,#3785);+#8627=ADVANCED_FACE('',(#8628),#8682,.F.);+#8628=FACE_BOUND('',#8629,.F.);+#8629=EDGE_LOOP('',(#8630,#8631,#8632,#8639,#8644,#8651,#8656,#8661,#8666,#8672,#8677,#8681));+#8630=ORIENTED_EDGE('',*,*,#8159,.F.);+#8631=ORIENTED_EDGE('',*,*,#8167,.T.);+#8632=ORIENTED_EDGE('',*,*,#8633,.T.);+#8633=EDGE_CURVE('',#8168,#8634,#8636,.T.);+#8634=VERTEX_POINT('',#8635);+#8635=CARTESIAN_POINT('',(-7.298480775301,-6.22,0.667364817767));+#8636=CIRCLE('',#8637,0.1);+#8637=AXIS2_PLACEMENT_3D('',#8638,#3937,#3938);+#8638=CARTESIAN_POINT('',(-7.2,-6.22,0.65));+#8639=ORIENTED_EDGE('',*,*,#8640,.T.);+#8640=EDGE_CURVE('',#8634,#8641,#8643,.T.);+#8641=VERTEX_POINT('',#8642);+#8642=CARTESIAN_POINT('',(-7.382385590716,-6.22,0.165270364467));+#8643=LINE('',#8635,#3944);+#8644=ORIENTED_EDGE('',*,*,#8645,.T.);+#8645=EDGE_CURVE('',#8641,#8646,#8648,.T.);+#8646=VERTEX_POINT('',#8647);+#8647=CARTESIAN_POINT('',(-7.579347141319,-6.22,1.387778780781E-16));+#8648=CIRCLE('',#8649,0.2);+#8649=AXIS2_PLACEMENT_3D('',#8650,#3953,#3954);+#8650=CARTESIAN_POINT('',(-7.579347141319,-6.22,0.2));+#8651=ORIENTED_EDGE('',*,*,#8652,.T.);+#8652=EDGE_CURVE('',#8646,#8653,#8655,.T.);+#8653=VERTEX_POINT('',#8654);+#8654=CARTESIAN_POINT('',(-8.,-6.22,1.387778780781E-16));+#8655=LINE('',#8647,#3928);+#8656=ORIENTED_EDGE('',*,*,#8657,.T.);+#8657=EDGE_CURVE('',#8653,#8658,#8660,.T.);+#8658=VERTEX_POINT('',#8659);+#8659=CARTESIAN_POINT('',(-8.,-6.22,0.1));+#8660=LINE('',#8654,#1074);+#8661=ORIENTED_EDGE('',*,*,#8662,.T.);+#8662=EDGE_CURVE('',#8658,#8663,#8665,.T.);+#8663=VERTEX_POINT('',#8664);+#8664=CARTESIAN_POINT('',(-7.579347141319,-6.22,0.1));+#8665=LINE('',#8659,#277);+#8666=ORIENTED_EDGE('',*,*,#8667,.T.);+#8667=EDGE_CURVE('',#8663,#8668,#8670,.T.);+#8668=VERTEX_POINT('',#8669);+#8669=CARTESIAN_POINT('',(-7.480866366018,-6.22,0.182635182233));+#8670=CIRCLE('',#8671,1.E-01);+#8671=AXIS2_PLACEMENT_3D('',#8650,#3937,#3976);+#8672=ORIENTED_EDGE('',*,*,#8673,.T.);+#8673=EDGE_CURVE('',#8668,#8674,#8676,.T.);+#8674=VERTEX_POINT('',#8675);+#8675=CARTESIAN_POINT('',(-7.396961550602,-6.22,0.684729635533));+#8676=LINE('',#8669,#3982);+#8677=ORIENTED_EDGE('',*,*,#8678,.T.);+#8678=EDGE_CURVE('',#8674,#4240,#8679,.T.);+#8679=CIRCLE('',#8680,0.2);+#8680=AXIS2_PLACEMENT_3D('',#8638,#1098,#3988);+#8681=ORIENTED_EDGE('',*,*,#4239,.T.);+#8682=PLANE('',#8683);+#8683=AXIS2_PLACEMENT_3D('',#8684,#1098,#13);+#8684=CARTESIAN_POINT('',(-7.414276639233,-6.22,0.410238158856));+#8685=ADVANCED_FACE('',(#8686),#8737,.T.);+#8686=FACE_BOUND('',#8687,.T.);+#8687=EDGE_LOOP('',(#8187,#8173,#8688,#8695,#8700,#8707,#8712,#8717,#8722,#8728,#8733,#4246));+#8688=ORIENTED_EDGE('',*,*,#8689,.T.);+#8689=EDGE_CURVE('',#8175,#8690,#8692,.T.);+#8690=VERTEX_POINT('',#8691);+#8691=CARTESIAN_POINT('',(-7.298480775301,-5.78,0.667364817767));+#8692=CIRCLE('',#8693,0.1);+#8693=AXIS2_PLACEMENT_3D('',#8694,#3937,#3938);+#8694=CARTESIAN_POINT('',(-7.2,-5.78,0.65));+#8695=ORIENTED_EDGE('',*,*,#8696,.T.);+#8696=EDGE_CURVE('',#8690,#8697,#8699,.T.);+#8697=VERTEX_POINT('',#8698);+#8698=CARTESIAN_POINT('',(-7.382385590716,-5.78,0.165270364467));+#8699=LINE('',#8691,#3944);+#8700=ORIENTED_EDGE('',*,*,#8701,.T.);+#8701=EDGE_CURVE('',#8697,#8702,#8704,.T.);+#8702=VERTEX_POINT('',#8703);+#8703=CARTESIAN_POINT('',(-7.579347141319,-5.78,1.387778780781E-16));+#8704=CIRCLE('',#8705,0.2);+#8705=AXIS2_PLACEMENT_3D('',#8706,#3953,#3954);+#8706=CARTESIAN_POINT('',(-7.579347141319,-5.78,0.2));+#8707=ORIENTED_EDGE('',*,*,#8708,.T.);+#8708=EDGE_CURVE('',#8702,#8709,#8711,.T.);+#8709=VERTEX_POINT('',#8710);+#8710=CARTESIAN_POINT('',(-8.,-5.78,1.387778780781E-16));+#8711=LINE('',#8703,#3928);+#8712=ORIENTED_EDGE('',*,*,#8713,.T.);+#8713=EDGE_CURVE('',#8709,#8714,#8716,.T.);+#8714=VERTEX_POINT('',#8715);+#8715=CARTESIAN_POINT('',(-8.,-5.78,0.1));+#8716=LINE('',#8710,#1074);+#8717=ORIENTED_EDGE('',*,*,#8718,.T.);+#8718=EDGE_CURVE('',#8714,#8719,#8721,.T.);+#8719=VERTEX_POINT('',#8720);+#8720=CARTESIAN_POINT('',(-7.579347141319,-5.78,0.1));+#8721=LINE('',#8715,#277);+#8722=ORIENTED_EDGE('',*,*,#8723,.T.);+#8723=EDGE_CURVE('',#8719,#8724,#8726,.T.);+#8724=VERTEX_POINT('',#8725);+#8725=CARTESIAN_POINT('',(-7.480866366018,-5.78,0.182635182233));+#8726=CIRCLE('',#8727,1.E-01);+#8727=AXIS2_PLACEMENT_3D('',#8706,#3937,#3976);+#8728=ORIENTED_EDGE('',*,*,#8729,.T.);+#8729=EDGE_CURVE('',#8724,#8730,#8732,.T.);+#8730=VERTEX_POINT('',#8731);+#8731=CARTESIAN_POINT('',(-7.396961550602,-5.78,0.684729635533));+#8732=LINE('',#8725,#3982);+#8733=ORIENTED_EDGE('',*,*,#8734,.T.);+#8734=EDGE_CURVE('',#8730,#4243,#8735,.T.);+#8735=CIRCLE('',#8736,0.2);+#8736=AXIS2_PLACEMENT_3D('',#8694,#1098,#3988);+#8737=PLANE('',#8738);+#8738=AXIS2_PLACEMENT_3D('',#8739,#1098,#13);+#8739=CARTESIAN_POINT('',(-7.414276639233,-5.78,0.410238158856));+#8740=ADVANCED_FACE('',(#8741),#8748,.T.);+#8741=FACE_BOUND('',#8742,.F.);+#8742=EDGE_LOOP('',(#8743,#8733,#8746,#8747));+#8743=ORIENTED_EDGE('',*,*,#8744,.T.);+#8744=EDGE_CURVE('',#8674,#8730,#8745,.T.);+#8745=LINE('',#8675,#1097);+#8746=ORIENTED_EDGE('',*,*,#4242,.F.);+#8747=ORIENTED_EDGE('',*,*,#8678,.F.);+#8748=CYLINDRICAL_SURFACE('',#8749,0.2);+#8749=AXIS2_PLACEMENT_3D('',#8638,#3937,#3988);+#8750=ADVANCED_FACE('',(#8751),#8805,.F.);+#8751=FACE_BOUND('',#8752,.F.);+#8752=EDGE_LOOP('',(#8753,#8754,#8755,#8762,#8767,#8774,#8779,#8784,#8789,#8795,#8800,#8804));+#8753=ORIENTED_EDGE('',*,*,#8193,.F.);+#8754=ORIENTED_EDGE('',*,*,#8201,.T.);+#8755=ORIENTED_EDGE('',*,*,#8756,.T.);+#8756=EDGE_CURVE('',#8202,#8757,#8759,.T.);+#8757=VERTEX_POINT('',#8758);+#8758=CARTESIAN_POINT('',(-7.298480775301,-5.22,0.667364817767));+#8759=CIRCLE('',#8760,0.1);+#8760=AXIS2_PLACEMENT_3D('',#8761,#3937,#3938);+#8761=CARTESIAN_POINT('',(-7.2,-5.22,0.65));+#8762=ORIENTED_EDGE('',*,*,#8763,.T.);+#8763=EDGE_CURVE('',#8757,#8764,#8766,.T.);+#8764=VERTEX_POINT('',#8765);+#8765=CARTESIAN_POINT('',(-7.382385590716,-5.22,0.165270364467));+#8766=LINE('',#8758,#3944);+#8767=ORIENTED_EDGE('',*,*,#8768,.T.);+#8768=EDGE_CURVE('',#8764,#8769,#8771,.T.);+#8769=VERTEX_POINT('',#8770);+#8770=CARTESIAN_POINT('',(-7.579347141319,-5.22,1.387778780781E-16));+#8771=CIRCLE('',#8772,0.2);+#8772=AXIS2_PLACEMENT_3D('',#8773,#3953,#3954);+#8773=CARTESIAN_POINT('',(-7.579347141319,-5.22,0.2));+#8774=ORIENTED_EDGE('',*,*,#8775,.T.);+#8775=EDGE_CURVE('',#8769,#8776,#8778,.T.);+#8776=VERTEX_POINT('',#8777);+#8777=CARTESIAN_POINT('',(-8.,-5.22,1.387778780781E-16));+#8778=LINE('',#8770,#3928);+#8779=ORIENTED_EDGE('',*,*,#8780,.T.);+#8780=EDGE_CURVE('',#8776,#8781,#8783,.T.);+#8781=VERTEX_POINT('',#8782);+#8782=CARTESIAN_POINT('',(-8.,-5.22,0.1));+#8783=LINE('',#8777,#1074);+#8784=ORIENTED_EDGE('',*,*,#8785,.T.);+#8785=EDGE_CURVE('',#8781,#8786,#8788,.T.);+#8786=VERTEX_POINT('',#8787);+#8787=CARTESIAN_POINT('',(-7.579347141319,-5.22,0.1));+#8788=LINE('',#8782,#277);+#8789=ORIENTED_EDGE('',*,*,#8790,.T.);+#8790=EDGE_CURVE('',#8786,#8791,#8793,.T.);+#8791=VERTEX_POINT('',#8792);+#8792=CARTESIAN_POINT('',(-7.480866366018,-5.22,0.182635182233));+#8793=CIRCLE('',#8794,1.E-01);+#8794=AXIS2_PLACEMENT_3D('',#8773,#3937,#3976);+#8795=ORIENTED_EDGE('',*,*,#8796,.T.);+#8796=EDGE_CURVE('',#8791,#8797,#8799,.T.);+#8797=VERTEX_POINT('',#8798);+#8798=CARTESIAN_POINT('',(-7.396961550602,-5.22,0.684729635533));+#8799=LINE('',#8792,#3982);+#8800=ORIENTED_EDGE('',*,*,#8801,.T.);+#8801=EDGE_CURVE('',#8797,#4275,#8802,.T.);+#8802=CIRCLE('',#8803,0.2);+#8803=AXIS2_PLACEMENT_3D('',#8761,#1098,#3988);+#8804=ORIENTED_EDGE('',*,*,#4274,.T.);+#8805=PLANE('',#8806);+#8806=AXIS2_PLACEMENT_3D('',#8807,#1098,#13);+#8807=CARTESIAN_POINT('',(-7.414276639233,-5.22,0.410238158856));+#8808=ADVANCED_FACE('',(#8809),#8860,.T.);+#8809=FACE_BOUND('',#8810,.T.);+#8810=EDGE_LOOP('',(#8221,#8207,#8811,#8818,#8823,#8830,#8835,#8840,#8845,#8851,#8856,#4281));+#8811=ORIENTED_EDGE('',*,*,#8812,.T.);+#8812=EDGE_CURVE('',#8209,#8813,#8815,.T.);+#8813=VERTEX_POINT('',#8814);+#8814=CARTESIAN_POINT('',(-7.298480775301,-4.78,0.667364817767));+#8815=CIRCLE('',#8816,0.1);+#8816=AXIS2_PLACEMENT_3D('',#8817,#3937,#3938);+#8817=CARTESIAN_POINT('',(-7.2,-4.78,0.65));+#8818=ORIENTED_EDGE('',*,*,#8819,.T.);+#8819=EDGE_CURVE('',#8813,#8820,#8822,.T.);+#8820=VERTEX_POINT('',#8821);+#8821=CARTESIAN_POINT('',(-7.382385590716,-4.78,0.165270364467));+#8822=LINE('',#8814,#3944);+#8823=ORIENTED_EDGE('',*,*,#8824,.T.);+#8824=EDGE_CURVE('',#8820,#8825,#8827,.T.);+#8825=VERTEX_POINT('',#8826);+#8826=CARTESIAN_POINT('',(-7.579347141319,-4.78,1.387778780781E-16));+#8827=CIRCLE('',#8828,0.2);+#8828=AXIS2_PLACEMENT_3D('',#8829,#3953,#3954);+#8829=CARTESIAN_POINT('',(-7.579347141319,-4.78,0.2));+#8830=ORIENTED_EDGE('',*,*,#8831,.T.);+#8831=EDGE_CURVE('',#8825,#8832,#8834,.T.);+#8832=VERTEX_POINT('',#8833);+#8833=CARTESIAN_POINT('',(-8.,-4.78,1.387778780781E-16));+#8834=LINE('',#8826,#3928);+#8835=ORIENTED_EDGE('',*,*,#8836,.T.);+#8836=EDGE_CURVE('',#8832,#8837,#8839,.T.);+#8837=VERTEX_POINT('',#8838);+#8838=CARTESIAN_POINT('',(-8.,-4.78,0.1));+#8839=LINE('',#8833,#1074);+#8840=ORIENTED_EDGE('',*,*,#8841,.T.);+#8841=EDGE_CURVE('',#8837,#8842,#8844,.T.);+#8842=VERTEX_POINT('',#8843);+#8843=CARTESIAN_POINT('',(-7.579347141319,-4.78,0.1));+#8844=LINE('',#8838,#277);+#8845=ORIENTED_EDGE('',*,*,#8846,.T.);+#8846=EDGE_CURVE('',#8842,#8847,#8849,.T.);+#8847=VERTEX_POINT('',#8848);+#8848=CARTESIAN_POINT('',(-7.480866366018,-4.78,0.182635182233));+#8849=CIRCLE('',#8850,1.E-01);+#8850=AXIS2_PLACEMENT_3D('',#8829,#3937,#3976);+#8851=ORIENTED_EDGE('',*,*,#8852,.T.);+#8852=EDGE_CURVE('',#8847,#8853,#8855,.T.);+#8853=VERTEX_POINT('',#8854);+#8854=CARTESIAN_POINT('',(-7.396961550602,-4.78,0.684729635533));+#8855=LINE('',#8848,#3982);+#8856=ORIENTED_EDGE('',*,*,#8857,.T.);+#8857=EDGE_CURVE('',#8853,#4278,#8858,.T.);+#8858=CIRCLE('',#8859,0.2);+#8859=AXIS2_PLACEMENT_3D('',#8817,#1098,#3988);+#8860=PLANE('',#8861);+#8861=AXIS2_PLACEMENT_3D('',#8862,#1098,#13);+#8862=CARTESIAN_POINT('',(-7.414276639233,-4.78,0.410238158856));+#8863=ADVANCED_FACE('',(#8864),#8871,.T.);+#8864=FACE_BOUND('',#8865,.F.);+#8865=EDGE_LOOP('',(#8866,#8856,#8869,#8870));+#8866=ORIENTED_EDGE('',*,*,#8867,.T.);+#8867=EDGE_CURVE('',#8797,#8853,#8868,.T.);+#8868=LINE('',#8798,#1097);+#8869=ORIENTED_EDGE('',*,*,#4277,.F.);+#8870=ORIENTED_EDGE('',*,*,#8801,.F.);+#8871=CYLINDRICAL_SURFACE('',#8872,0.2);+#8872=AXIS2_PLACEMENT_3D('',#8761,#3937,#3988);+#8873=ADVANCED_FACE('',(#8874),#8928,.F.);+#8874=FACE_BOUND('',#8875,.F.);+#8875=EDGE_LOOP('',(#8876,#8877,#8878,#8885,#8890,#8897,#8902,#8907,#8912,#8918,#8923,#8927));+#8876=ORIENTED_EDGE('',*,*,#8227,.F.);+#8877=ORIENTED_EDGE('',*,*,#8235,.T.);+#8878=ORIENTED_EDGE('',*,*,#8879,.T.);+#8879=EDGE_CURVE('',#8236,#8880,#8882,.T.);+#8880=VERTEX_POINT('',#8881);+#8881=CARTESIAN_POINT('',(-7.298480775301,-4.22,0.667364817767));+#8882=CIRCLE('',#8883,0.1);+#8883=AXIS2_PLACEMENT_3D('',#8884,#3937,#3938);+#8884=CARTESIAN_POINT('',(-7.2,-4.22,0.65));+#8885=ORIENTED_EDGE('',*,*,#8886,.T.);+#8886=EDGE_CURVE('',#8880,#8887,#8889,.T.);+#8887=VERTEX_POINT('',#8888);+#8888=CARTESIAN_POINT('',(-7.382385590716,-4.22,0.165270364467));+#8889=LINE('',#8881,#3944);+#8890=ORIENTED_EDGE('',*,*,#8891,.T.);+#8891=EDGE_CURVE('',#8887,#8892,#8894,.T.);+#8892=VERTEX_POINT('',#8893);+#8893=CARTESIAN_POINT('',(-7.579347141319,-4.22,1.387778780781E-16));+#8894=CIRCLE('',#8895,0.2);+#8895=AXIS2_PLACEMENT_3D('',#8896,#3953,#3954);+#8896=CARTESIAN_POINT('',(-7.579347141319,-4.22,0.2));+#8897=ORIENTED_EDGE('',*,*,#8898,.T.);+#8898=EDGE_CURVE('',#8892,#8899,#8901,.T.);+#8899=VERTEX_POINT('',#8900);+#8900=CARTESIAN_POINT('',(-8.,-4.22,1.387778780781E-16));+#8901=LINE('',#8893,#3928);+#8902=ORIENTED_EDGE('',*,*,#8903,.T.);+#8903=EDGE_CURVE('',#8899,#8904,#8906,.T.);+#8904=VERTEX_POINT('',#8905);+#8905=CARTESIAN_POINT('',(-8.,-4.22,0.1));+#8906=LINE('',#8900,#1074);+#8907=ORIENTED_EDGE('',*,*,#8908,.T.);+#8908=EDGE_CURVE('',#8904,#8909,#8911,.T.);+#8909=VERTEX_POINT('',#8910);+#8910=CARTESIAN_POINT('',(-7.579347141319,-4.22,0.1));+#8911=LINE('',#8905,#277);+#8912=ORIENTED_EDGE('',*,*,#8913,.T.);+#8913=EDGE_CURVE('',#8909,#8914,#8916,.T.);+#8914=VERTEX_POINT('',#8915);+#8915=CARTESIAN_POINT('',(-7.480866366018,-4.22,0.182635182233));+#8916=CIRCLE('',#8917,1.E-01);+#8917=AXIS2_PLACEMENT_3D('',#8896,#3937,#3976);+#8918=ORIENTED_EDGE('',*,*,#8919,.T.);+#8919=EDGE_CURVE('',#8914,#8920,#8922,.T.);+#8920=VERTEX_POINT('',#8921);+#8921=CARTESIAN_POINT('',(-7.396961550602,-4.22,0.684729635533));+#8922=LINE('',#8915,#3982);+#8923=ORIENTED_EDGE('',*,*,#8924,.T.);+#8924=EDGE_CURVE('',#8920,#4310,#8925,.T.);+#8925=CIRCLE('',#8926,0.2);+#8926=AXIS2_PLACEMENT_3D('',#8884,#1098,#3988);+#8927=ORIENTED_EDGE('',*,*,#4309,.T.);+#8928=PLANE('',#8929);+#8929=AXIS2_PLACEMENT_3D('',#8930,#1098,#13);+#8930=CARTESIAN_POINT('',(-7.414276639233,-4.22,0.410238158856));+#8931=ADVANCED_FACE('',(#8932),#8983,.T.);+#8932=FACE_BOUND('',#8933,.T.);+#8933=EDGE_LOOP('',(#8255,#8241,#8934,#8941,#8946,#8953,#8958,#8963,#8968,#8974,#8979,#4316));+#8934=ORIENTED_EDGE('',*,*,#8935,.T.);+#8935=EDGE_CURVE('',#8243,#8936,#8938,.T.);+#8936=VERTEX_POINT('',#8937);+#8937=CARTESIAN_POINT('',(-7.298480775301,-3.78,0.667364817767));+#8938=CIRCLE('',#8939,0.1);+#8939=AXIS2_PLACEMENT_3D('',#8940,#3937,#3938);+#8940=CARTESIAN_POINT('',(-7.2,-3.78,0.65));+#8941=ORIENTED_EDGE('',*,*,#8942,.T.);+#8942=EDGE_CURVE('',#8936,#8943,#8945,.T.);+#8943=VERTEX_POINT('',#8944);+#8944=CARTESIAN_POINT('',(-7.382385590716,-3.78,0.165270364467));+#8945=LINE('',#8937,#3944);+#8946=ORIENTED_EDGE('',*,*,#8947,.T.);+#8947=EDGE_CURVE('',#8943,#8948,#8950,.T.);+#8948=VERTEX_POINT('',#8949);+#8949=CARTESIAN_POINT('',(-7.579347141319,-3.78,1.387778780781E-16));+#8950=CIRCLE('',#8951,0.2);+#8951=AXIS2_PLACEMENT_3D('',#8952,#3953,#3954);+#8952=CARTESIAN_POINT('',(-7.579347141319,-3.78,0.2));+#8953=ORIENTED_EDGE('',*,*,#8954,.T.);+#8954=EDGE_CURVE('',#8948,#8955,#8957,.T.);+#8955=VERTEX_POINT('',#8956);+#8956=CARTESIAN_POINT('',(-8.,-3.78,1.387778780781E-16));+#8957=LINE('',#8949,#3928);+#8958=ORIENTED_EDGE('',*,*,#8959,.T.);+#8959=EDGE_CURVE('',#8955,#8960,#8962,.T.);+#8960=VERTEX_POINT('',#8961);+#8961=CARTESIAN_POINT('',(-8.,-3.78,0.1));+#8962=LINE('',#8956,#1074);+#8963=ORIENTED_EDGE('',*,*,#8964,.T.);+#8964=EDGE_CURVE('',#8960,#8965,#8967,.T.);+#8965=VERTEX_POINT('',#8966);+#8966=CARTESIAN_POINT('',(-7.579347141319,-3.78,0.1));+#8967=LINE('',#8961,#277);+#8968=ORIENTED_EDGE('',*,*,#8969,.T.);+#8969=EDGE_CURVE('',#8965,#8970,#8972,.T.);+#8970=VERTEX_POINT('',#8971);+#8971=CARTESIAN_POINT('',(-7.480866366018,-3.78,0.182635182233));+#8972=CIRCLE('',#8973,1.E-01);+#8973=AXIS2_PLACEMENT_3D('',#8952,#3937,#3976);+#8974=ORIENTED_EDGE('',*,*,#8975,.T.);+#8975=EDGE_CURVE('',#8970,#8976,#8978,.T.);+#8976=VERTEX_POINT('',#8977);+#8977=CARTESIAN_POINT('',(-7.396961550602,-3.78,0.684729635533));+#8978=LINE('',#8971,#3982);+#8979=ORIENTED_EDGE('',*,*,#8980,.T.);+#8980=EDGE_CURVE('',#8976,#4313,#8981,.T.);+#8981=CIRCLE('',#8982,0.2);+#8982=AXIS2_PLACEMENT_3D('',#8940,#1098,#3988);+#8983=PLANE('',#8984);+#8984=AXIS2_PLACEMENT_3D('',#8985,#1098,#13);+#8985=CARTESIAN_POINT('',(-7.414276639233,-3.78,0.410238158856));+#8986=ADVANCED_FACE('',(#8987),#8994,.T.);+#8987=FACE_BOUND('',#8988,.F.);+#8988=EDGE_LOOP('',(#8989,#8979,#8992,#8993));+#8989=ORIENTED_EDGE('',*,*,#8990,.T.);+#8990=EDGE_CURVE('',#8920,#8976,#8991,.T.);+#8991=LINE('',#8921,#1097);+#8992=ORIENTED_EDGE('',*,*,#4312,.F.);+#8993=ORIENTED_EDGE('',*,*,#8924,.F.);+#8994=CYLINDRICAL_SURFACE('',#8995,0.2);+#8995=AXIS2_PLACEMENT_3D('',#8884,#3937,#3988);+#8996=ADVANCED_FACE('',(#8997),#9051,.F.);+#8997=FACE_BOUND('',#8998,.F.);+#8998=EDGE_LOOP('',(#8999,#9000,#9001,#9008,#9013,#9020,#9025,#9030,#9035,#9041,#9046,#9050));+#8999=ORIENTED_EDGE('',*,*,#8261,.F.);+#9000=ORIENTED_EDGE('',*,*,#8269,.T.);+#9001=ORIENTED_EDGE('',*,*,#9002,.T.);+#9002=EDGE_CURVE('',#8270,#9003,#9005,.T.);+#9003=VERTEX_POINT('',#9004);+#9004=CARTESIAN_POINT('',(-7.298480775301,-3.22,0.667364817767));+#9005=CIRCLE('',#9006,0.1);+#9006=AXIS2_PLACEMENT_3D('',#9007,#3937,#3938);+#9007=CARTESIAN_POINT('',(-7.2,-3.22,0.65));+#9008=ORIENTED_EDGE('',*,*,#9009,.T.);+#9009=EDGE_CURVE('',#9003,#9010,#9012,.T.);+#9010=VERTEX_POINT('',#9011);+#9011=CARTESIAN_POINT('',(-7.382385590716,-3.22,0.165270364467));+#9012=LINE('',#9004,#3944);+#9013=ORIENTED_EDGE('',*,*,#9014,.T.);+#9014=EDGE_CURVE('',#9010,#9015,#9017,.T.);+#9015=VERTEX_POINT('',#9016);+#9016=CARTESIAN_POINT('',(-7.579347141319,-3.22,1.387778780781E-16));+#9017=CIRCLE('',#9018,0.2);+#9018=AXIS2_PLACEMENT_3D('',#9019,#3953,#3954);+#9019=CARTESIAN_POINT('',(-7.579347141319,-3.22,0.2));+#9020=ORIENTED_EDGE('',*,*,#9021,.T.);+#9021=EDGE_CURVE('',#9015,#9022,#9024,.T.);+#9022=VERTEX_POINT('',#9023);+#9023=CARTESIAN_POINT('',(-8.,-3.22,1.387778780781E-16));+#9024=LINE('',#9016,#3928);+#9025=ORIENTED_EDGE('',*,*,#9026,.T.);+#9026=EDGE_CURVE('',#9022,#9027,#9029,.T.);+#9027=VERTEX_POINT('',#9028);+#9028=CARTESIAN_POINT('',(-8.,-3.22,0.1));+#9029=LINE('',#9023,#1074);+#9030=ORIENTED_EDGE('',*,*,#9031,.T.);+#9031=EDGE_CURVE('',#9027,#9032,#9034,.T.);+#9032=VERTEX_POINT('',#9033);+#9033=CARTESIAN_POINT('',(-7.579347141319,-3.22,0.1));+#9034=LINE('',#9028,#277);+#9035=ORIENTED_EDGE('',*,*,#9036,.T.);+#9036=EDGE_CURVE('',#9032,#9037,#9039,.T.);+#9037=VERTEX_POINT('',#9038);+#9038=CARTESIAN_POINT('',(-7.480866366018,-3.22,0.182635182233));+#9039=CIRCLE('',#9040,1.E-01);+#9040=AXIS2_PLACEMENT_3D('',#9019,#3937,#3976);+#9041=ORIENTED_EDGE('',*,*,#9042,.T.);+#9042=EDGE_CURVE('',#9037,#9043,#9045,.T.);+#9043=VERTEX_POINT('',#9044);+#9044=CARTESIAN_POINT('',(-7.396961550602,-3.22,0.684729635533));+#9045=LINE('',#9038,#3982);+#9046=ORIENTED_EDGE('',*,*,#9047,.T.);+#9047=EDGE_CURVE('',#9043,#4345,#9048,.T.);+#9048=CIRCLE('',#9049,0.2);+#9049=AXIS2_PLACEMENT_3D('',#9007,#1098,#3988);+#9050=ORIENTED_EDGE('',*,*,#4344,.T.);+#9051=PLANE('',#9052);+#9052=AXIS2_PLACEMENT_3D('',#9053,#1098,#13);+#9053=CARTESIAN_POINT('',(-7.414276639233,-3.22,0.410238158856));+#9054=ADVANCED_FACE('',(#9055),#9106,.T.);+#9055=FACE_BOUND('',#9056,.T.);+#9056=EDGE_LOOP('',(#8289,#8275,#9057,#9064,#9069,#9076,#9081,#9086,#9091,#9097,#9102,#4351));+#9057=ORIENTED_EDGE('',*,*,#9058,.T.);+#9058=EDGE_CURVE('',#8277,#9059,#9061,.T.);+#9059=VERTEX_POINT('',#9060);+#9060=CARTESIAN_POINT('',(-7.298480775301,-2.78,0.667364817767));+#9061=CIRCLE('',#9062,0.1);+#9062=AXIS2_PLACEMENT_3D('',#9063,#3937,#3938);+#9063=CARTESIAN_POINT('',(-7.2,-2.78,0.65));+#9064=ORIENTED_EDGE('',*,*,#9065,.T.);+#9065=EDGE_CURVE('',#9059,#9066,#9068,.T.);+#9066=VERTEX_POINT('',#9067);+#9067=CARTESIAN_POINT('',(-7.382385590716,-2.78,0.165270364467));+#9068=LINE('',#9060,#3944);+#9069=ORIENTED_EDGE('',*,*,#9070,.T.);+#9070=EDGE_CURVE('',#9066,#9071,#9073,.T.);+#9071=VERTEX_POINT('',#9072);+#9072=CARTESIAN_POINT('',(-7.579347141319,-2.78,1.387778780781E-16));+#9073=CIRCLE('',#9074,0.2);+#9074=AXIS2_PLACEMENT_3D('',#9075,#3953,#3954);+#9075=CARTESIAN_POINT('',(-7.579347141319,-2.78,0.2));+#9076=ORIENTED_EDGE('',*,*,#9077,.T.);+#9077=EDGE_CURVE('',#9071,#9078,#9080,.T.);+#9078=VERTEX_POINT('',#9079);+#9079=CARTESIAN_POINT('',(-8.,-2.78,1.387778780781E-16));+#9080=LINE('',#9072,#3928);+#9081=ORIENTED_EDGE('',*,*,#9082,.T.);+#9082=EDGE_CURVE('',#9078,#9083,#9085,.T.);+#9083=VERTEX_POINT('',#9084);+#9084=CARTESIAN_POINT('',(-8.,-2.78,0.1));+#9085=LINE('',#9079,#1074);+#9086=ORIENTED_EDGE('',*,*,#9087,.T.);+#9087=EDGE_CURVE('',#9083,#9088,#9090,.T.);+#9088=VERTEX_POINT('',#9089);+#9089=CARTESIAN_POINT('',(-7.579347141319,-2.78,0.1));+#9090=LINE('',#9084,#277);+#9091=ORIENTED_EDGE('',*,*,#9092,.T.);+#9092=EDGE_CURVE('',#9088,#9093,#9095,.T.);+#9093=VERTEX_POINT('',#9094);+#9094=CARTESIAN_POINT('',(-7.480866366018,-2.78,0.182635182233));+#9095=CIRCLE('',#9096,1.E-01);+#9096=AXIS2_PLACEMENT_3D('',#9075,#3937,#3976);+#9097=ORIENTED_EDGE('',*,*,#9098,.T.);+#9098=EDGE_CURVE('',#9093,#9099,#9101,.T.);+#9099=VERTEX_POINT('',#9100);+#9100=CARTESIAN_POINT('',(-7.396961550602,-2.78,0.684729635533));+#9101=LINE('',#9094,#3982);+#9102=ORIENTED_EDGE('',*,*,#9103,.T.);+#9103=EDGE_CURVE('',#9099,#4348,#9104,.T.);+#9104=CIRCLE('',#9105,0.2);+#9105=AXIS2_PLACEMENT_3D('',#9063,#1098,#3988);+#9106=PLANE('',#9107);+#9107=AXIS2_PLACEMENT_3D('',#9108,#1098,#13);+#9108=CARTESIAN_POINT('',(-7.414276639233,-2.78,0.410238158856));+#9109=ADVANCED_FACE('',(#9110),#9117,.T.);+#9110=FACE_BOUND('',#9111,.F.);+#9111=EDGE_LOOP('',(#9112,#9102,#9115,#9116));+#9112=ORIENTED_EDGE('',*,*,#9113,.T.);+#9113=EDGE_CURVE('',#9043,#9099,#9114,.T.);+#9114=LINE('',#9044,#1097);+#9115=ORIENTED_EDGE('',*,*,#4347,.F.);+#9116=ORIENTED_EDGE('',*,*,#9047,.F.);+#9117=CYLINDRICAL_SURFACE('',#9118,0.2);+#9118=AXIS2_PLACEMENT_3D('',#9007,#3937,#3988);+#9119=ADVANCED_FACE('',(#9120),#9174,.F.);+#9120=FACE_BOUND('',#9121,.F.);+#9121=EDGE_LOOP('',(#9122,#9123,#9124,#9131,#9136,#9143,#9148,#9153,#9158,#9164,#9169,#9173));+#9122=ORIENTED_EDGE('',*,*,#8295,.F.);+#9123=ORIENTED_EDGE('',*,*,#8303,.T.);+#9124=ORIENTED_EDGE('',*,*,#9125,.T.);+#9125=EDGE_CURVE('',#8304,#9126,#9128,.T.);+#9126=VERTEX_POINT('',#9127);+#9127=CARTESIAN_POINT('',(-7.298480775301,-2.22,0.667364817767));+#9128=CIRCLE('',#9129,0.1);+#9129=AXIS2_PLACEMENT_3D('',#9130,#3937,#3938);+#9130=CARTESIAN_POINT('',(-7.2,-2.22,0.65));+#9131=ORIENTED_EDGE('',*,*,#9132,.T.);+#9132=EDGE_CURVE('',#9126,#9133,#9135,.T.);+#9133=VERTEX_POINT('',#9134);+#9134=CARTESIAN_POINT('',(-7.382385590716,-2.22,0.165270364467));+#9135=LINE('',#9127,#3944);+#9136=ORIENTED_EDGE('',*,*,#9137,.T.);+#9137=EDGE_CURVE('',#9133,#9138,#9140,.T.);+#9138=VERTEX_POINT('',#9139);+#9139=CARTESIAN_POINT('',(-7.579347141319,-2.22,1.387778780781E-16));+#9140=CIRCLE('',#9141,0.2);+#9141=AXIS2_PLACEMENT_3D('',#9142,#3953,#3954);+#9142=CARTESIAN_POINT('',(-7.579347141319,-2.22,0.2));+#9143=ORIENTED_EDGE('',*,*,#9144,.T.);+#9144=EDGE_CURVE('',#9138,#9145,#9147,.T.);+#9145=VERTEX_POINT('',#9146);+#9146=CARTESIAN_POINT('',(-8.,-2.22,1.387778780781E-16));+#9147=LINE('',#9139,#3928);+#9148=ORIENTED_EDGE('',*,*,#9149,.T.);+#9149=EDGE_CURVE('',#9145,#9150,#9152,.T.);+#9150=VERTEX_POINT('',#9151);+#9151=CARTESIAN_POINT('',(-8.,-2.22,0.1));+#9152=LINE('',#9146,#1074);+#9153=ORIENTED_EDGE('',*,*,#9154,.T.);+#9154=EDGE_CURVE('',#9150,#9155,#9157,.T.);+#9155=VERTEX_POINT('',#9156);+#9156=CARTESIAN_POINT('',(-7.579347141319,-2.22,0.1));+#9157=LINE('',#9151,#277);+#9158=ORIENTED_EDGE('',*,*,#9159,.T.);+#9159=EDGE_CURVE('',#9155,#9160,#9162,.T.);+#9160=VERTEX_POINT('',#9161);+#9161=CARTESIAN_POINT('',(-7.480866366018,-2.22,0.182635182233));+#9162=CIRCLE('',#9163,1.E-01);+#9163=AXIS2_PLACEMENT_3D('',#9142,#3937,#3976);+#9164=ORIENTED_EDGE('',*,*,#9165,.T.);+#9165=EDGE_CURVE('',#9160,#9166,#9168,.T.);+#9166=VERTEX_POINT('',#9167);+#9167=CARTESIAN_POINT('',(-7.396961550602,-2.22,0.684729635533));+#9168=LINE('',#9161,#3982);+#9169=ORIENTED_EDGE('',*,*,#9170,.T.);+#9170=EDGE_CURVE('',#9166,#4380,#9171,.T.);+#9171=CIRCLE('',#9172,0.2);+#9172=AXIS2_PLACEMENT_3D('',#9130,#1098,#3988);+#9173=ORIENTED_EDGE('',*,*,#4379,.T.);+#9174=PLANE('',#9175);+#9175=AXIS2_PLACEMENT_3D('',#9176,#1098,#13);+#9176=CARTESIAN_POINT('',(-7.414276639233,-2.22,0.410238158856));+#9177=ADVANCED_FACE('',(#9178),#9229,.T.);+#9178=FACE_BOUND('',#9179,.T.);+#9179=EDGE_LOOP('',(#8323,#8309,#9180,#9187,#9192,#9199,#9204,#9209,#9214,#9220,#9225,#4386));+#9180=ORIENTED_EDGE('',*,*,#9181,.T.);+#9181=EDGE_CURVE('',#8311,#9182,#9184,.T.);+#9182=VERTEX_POINT('',#9183);+#9183=CARTESIAN_POINT('',(-7.298480775301,-1.78,0.667364817767));+#9184=CIRCLE('',#9185,0.1);+#9185=AXIS2_PLACEMENT_3D('',#9186,#3937,#3938);+#9186=CARTESIAN_POINT('',(-7.2,-1.78,0.65));+#9187=ORIENTED_EDGE('',*,*,#9188,.T.);+#9188=EDGE_CURVE('',#9182,#9189,#9191,.T.);+#9189=VERTEX_POINT('',#9190);+#9190=CARTESIAN_POINT('',(-7.382385590716,-1.78,0.165270364467));+#9191=LINE('',#9183,#3944);+#9192=ORIENTED_EDGE('',*,*,#9193,.T.);+#9193=EDGE_CURVE('',#9189,#9194,#9196,.T.);+#9194=VERTEX_POINT('',#9195);+#9195=CARTESIAN_POINT('',(-7.579347141319,-1.78,1.387778780781E-16));+#9196=CIRCLE('',#9197,0.2);+#9197=AXIS2_PLACEMENT_3D('',#9198,#3953,#3954);+#9198=CARTESIAN_POINT('',(-7.579347141319,-1.78,0.2));+#9199=ORIENTED_EDGE('',*,*,#9200,.T.);+#9200=EDGE_CURVE('',#9194,#9201,#9203,.T.);+#9201=VERTEX_POINT('',#9202);+#9202=CARTESIAN_POINT('',(-8.,-1.78,1.387778780781E-16));+#9203=LINE('',#9195,#3928);+#9204=ORIENTED_EDGE('',*,*,#9205,.T.);+#9205=EDGE_CURVE('',#9201,#9206,#9208,.T.);+#9206=VERTEX_POINT('',#9207);+#9207=CARTESIAN_POINT('',(-8.,-1.78,0.1));+#9208=LINE('',#9202,#1074);+#9209=ORIENTED_EDGE('',*,*,#9210,.T.);+#9210=EDGE_CURVE('',#9206,#9211,#9213,.T.);+#9211=VERTEX_POINT('',#9212);+#9212=CARTESIAN_POINT('',(-7.579347141319,-1.78,0.1));+#9213=LINE('',#9207,#277);+#9214=ORIENTED_EDGE('',*,*,#9215,.T.);+#9215=EDGE_CURVE('',#9211,#9216,#9218,.T.);+#9216=VERTEX_POINT('',#9217);+#9217=CARTESIAN_POINT('',(-7.480866366018,-1.78,0.182635182233));+#9218=CIRCLE('',#9219,1.E-01);+#9219=AXIS2_PLACEMENT_3D('',#9198,#3937,#3976);+#9220=ORIENTED_EDGE('',*,*,#9221,.T.);+#9221=EDGE_CURVE('',#9216,#9222,#9224,.T.);+#9222=VERTEX_POINT('',#9223);+#9223=CARTESIAN_POINT('',(-7.396961550602,-1.78,0.684729635533));+#9224=LINE('',#9217,#3982);+#9225=ORIENTED_EDGE('',*,*,#9226,.T.);+#9226=EDGE_CURVE('',#9222,#4383,#9227,.T.);+#9227=CIRCLE('',#9228,0.2);+#9228=AXIS2_PLACEMENT_3D('',#9186,#1098,#3988);+#9229=PLANE('',#9230);+#9230=AXIS2_PLACEMENT_3D('',#9231,#1098,#13);+#9231=CARTESIAN_POINT('',(-7.414276639233,-1.78,0.410238158856));+#9232=ADVANCED_FACE('',(#9233),#9240,.T.);+#9233=FACE_BOUND('',#9234,.F.);+#9234=EDGE_LOOP('',(#9235,#9225,#9238,#9239));+#9235=ORIENTED_EDGE('',*,*,#9236,.T.);+#9236=EDGE_CURVE('',#9166,#9222,#9237,.T.);+#9237=LINE('',#9167,#1097);+#9238=ORIENTED_EDGE('',*,*,#4382,.F.);+#9239=ORIENTED_EDGE('',*,*,#9170,.F.);+#9240=CYLINDRICAL_SURFACE('',#9241,0.2);+#9241=AXIS2_PLACEMENT_3D('',#9130,#3937,#3988);+#9242=ADVANCED_FACE('',(#9243),#9297,.F.);+#9243=FACE_BOUND('',#9244,.F.);+#9244=EDGE_LOOP('',(#9245,#9246,#9247,#9254,#9259,#9266,#9271,#9276,#9281,#9287,#9292,#9296));+#9245=ORIENTED_EDGE('',*,*,#8329,.F.);+#9246=ORIENTED_EDGE('',*,*,#8337,.T.);+#9247=ORIENTED_EDGE('',*,*,#9248,.T.);+#9248=EDGE_CURVE('',#8338,#9249,#9251,.T.);+#9249=VERTEX_POINT('',#9250);+#9250=CARTESIAN_POINT('',(-7.298480775301,-1.22,0.667364817767));+#9251=CIRCLE('',#9252,0.1);+#9252=AXIS2_PLACEMENT_3D('',#9253,#3937,#3938);+#9253=CARTESIAN_POINT('',(-7.2,-1.22,0.65));+#9254=ORIENTED_EDGE('',*,*,#9255,.T.);+#9255=EDGE_CURVE('',#9249,#9256,#9258,.T.);+#9256=VERTEX_POINT('',#9257);+#9257=CARTESIAN_POINT('',(-7.382385590716,-1.22,0.165270364467));+#9258=LINE('',#9250,#3944);+#9259=ORIENTED_EDGE('',*,*,#9260,.T.);+#9260=EDGE_CURVE('',#9256,#9261,#9263,.T.);+#9261=VERTEX_POINT('',#9262);+#9262=CARTESIAN_POINT('',(-7.579347141319,-1.22,1.387778780781E-16));+#9263=CIRCLE('',#9264,0.2);+#9264=AXIS2_PLACEMENT_3D('',#9265,#3953,#3954);+#9265=CARTESIAN_POINT('',(-7.579347141319,-1.22,0.2));+#9266=ORIENTED_EDGE('',*,*,#9267,.T.);+#9267=EDGE_CURVE('',#9261,#9268,#9270,.T.);+#9268=VERTEX_POINT('',#9269);+#9269=CARTESIAN_POINT('',(-8.,-1.22,1.387778780781E-16));+#9270=LINE('',#9262,#3928);+#9271=ORIENTED_EDGE('',*,*,#9272,.T.);+#9272=EDGE_CURVE('',#9268,#9273,#9275,.T.);+#9273=VERTEX_POINT('',#9274);+#9274=CARTESIAN_POINT('',(-8.,-1.22,0.1));+#9275=LINE('',#9269,#1074);+#9276=ORIENTED_EDGE('',*,*,#9277,.T.);+#9277=EDGE_CURVE('',#9273,#9278,#9280,.T.);+#9278=VERTEX_POINT('',#9279);+#9279=CARTESIAN_POINT('',(-7.579347141319,-1.22,0.1));+#9280=LINE('',#9274,#277);+#9281=ORIENTED_EDGE('',*,*,#9282,.T.);+#9282=EDGE_CURVE('',#9278,#9283,#9285,.T.);+#9283=VERTEX_POINT('',#9284);+#9284=CARTESIAN_POINT('',(-7.480866366018,-1.22,0.182635182233));+#9285=CIRCLE('',#9286,1.E-01);+#9286=AXIS2_PLACEMENT_3D('',#9265,#3937,#3976);+#9287=ORIENTED_EDGE('',*,*,#9288,.T.);+#9288=EDGE_CURVE('',#9283,#9289,#9291,.T.);+#9289=VERTEX_POINT('',#9290);+#9290=CARTESIAN_POINT('',(-7.396961550602,-1.22,0.684729635533));+#9291=LINE('',#9284,#3982);+#9292=ORIENTED_EDGE('',*,*,#9293,.T.);+#9293=EDGE_CURVE('',#9289,#4415,#9294,.T.);+#9294=CIRCLE('',#9295,0.2);+#9295=AXIS2_PLACEMENT_3D('',#9253,#1098,#3988);+#9296=ORIENTED_EDGE('',*,*,#4414,.T.);+#9297=PLANE('',#9298);+#9298=AXIS2_PLACEMENT_3D('',#9299,#1098,#13);+#9299=CARTESIAN_POINT('',(-7.414276639233,-1.22,0.410238158856));+#9300=ADVANCED_FACE('',(#9301),#9352,.T.);+#9301=FACE_BOUND('',#9302,.T.);+#9302=EDGE_LOOP('',(#8357,#8343,#9303,#9310,#9315,#9322,#9327,#9332,#9337,#9343,#9348,#4421));+#9303=ORIENTED_EDGE('',*,*,#9304,.T.);+#9304=EDGE_CURVE('',#8345,#9305,#9307,.T.);+#9305=VERTEX_POINT('',#9306);+#9306=CARTESIAN_POINT('',(-7.298480775301,-0.78,0.667364817767));+#9307=CIRCLE('',#9308,0.1);+#9308=AXIS2_PLACEMENT_3D('',#9309,#3937,#3938);+#9309=CARTESIAN_POINT('',(-7.2,-0.78,0.65));+#9310=ORIENTED_EDGE('',*,*,#9311,.T.);+#9311=EDGE_CURVE('',#9305,#9312,#9314,.T.);+#9312=VERTEX_POINT('',#9313);+#9313=CARTESIAN_POINT('',(-7.382385590716,-0.78,0.165270364467));+#9314=LINE('',#9306,#3944);+#9315=ORIENTED_EDGE('',*,*,#9316,.T.);+#9316=EDGE_CURVE('',#9312,#9317,#9319,.T.);+#9317=VERTEX_POINT('',#9318);+#9318=CARTESIAN_POINT('',(-7.579347141319,-0.78,1.387778780781E-16));+#9319=CIRCLE('',#9320,0.2);+#9320=AXIS2_PLACEMENT_3D('',#9321,#3953,#3954);+#9321=CARTESIAN_POINT('',(-7.579347141319,-0.78,0.2));+#9322=ORIENTED_EDGE('',*,*,#9323,.T.);+#9323=EDGE_CURVE('',#9317,#9324,#9326,.T.);+#9324=VERTEX_POINT('',#9325);+#9325=CARTESIAN_POINT('',(-8.,-0.78,1.387778780781E-16));+#9326=LINE('',#9318,#3928);+#9327=ORIENTED_EDGE('',*,*,#9328,.T.);+#9328=EDGE_CURVE('',#9324,#9329,#9331,.T.);+#9329=VERTEX_POINT('',#9330);+#9330=CARTESIAN_POINT('',(-8.,-0.78,0.1));+#9331=LINE('',#9325,#1074);+#9332=ORIENTED_EDGE('',*,*,#9333,.T.);+#9333=EDGE_CURVE('',#9329,#9334,#9336,.T.);+#9334=VERTEX_POINT('',#9335);+#9335=CARTESIAN_POINT('',(-7.579347141319,-0.78,0.1));+#9336=LINE('',#9330,#277);+#9337=ORIENTED_EDGE('',*,*,#9338,.T.);+#9338=EDGE_CURVE('',#9334,#9339,#9341,.T.);+#9339=VERTEX_POINT('',#9340);+#9340=CARTESIAN_POINT('',(-7.480866366018,-0.78,0.182635182233));+#9341=CIRCLE('',#9342,1.E-01);+#9342=AXIS2_PLACEMENT_3D('',#9321,#3937,#3976);+#9343=ORIENTED_EDGE('',*,*,#9344,.T.);+#9344=EDGE_CURVE('',#9339,#9345,#9347,.T.);+#9345=VERTEX_POINT('',#9346);+#9346=CARTESIAN_POINT('',(-7.396961550602,-0.78,0.684729635533));+#9347=LINE('',#9340,#3982);+#9348=ORIENTED_EDGE('',*,*,#9349,.T.);+#9349=EDGE_CURVE('',#9345,#4418,#9350,.T.);+#9350=CIRCLE('',#9351,0.2);+#9351=AXIS2_PLACEMENT_3D('',#9309,#1098,#3988);+#9352=PLANE('',#9353);+#9353=AXIS2_PLACEMENT_3D('',#9354,#1098,#13);+#9354=CARTESIAN_POINT('',(-7.414276639233,-0.78,0.410238158856));+#9355=ADVANCED_FACE('',(#9356),#9363,.T.);+#9356=FACE_BOUND('',#9357,.F.);+#9357=EDGE_LOOP('',(#9358,#9348,#9361,#9362));+#9358=ORIENTED_EDGE('',*,*,#9359,.T.);+#9359=EDGE_CURVE('',#9289,#9345,#9360,.T.);+#9360=LINE('',#9290,#1097);+#9361=ORIENTED_EDGE('',*,*,#4417,.F.);+#9362=ORIENTED_EDGE('',*,*,#9293,.F.);+#9363=CYLINDRICAL_SURFACE('',#9364,0.2);+#9364=AXIS2_PLACEMENT_3D('',#9253,#3937,#3988);+#9365=ADVANCED_FACE('',(#9366),#9420,.F.);+#9366=FACE_BOUND('',#9367,.F.);+#9367=EDGE_LOOP('',(#9368,#9369,#9370,#9377,#9382,#9389,#9394,#9399,#9404,#9410,#9415,#9419));+#9368=ORIENTED_EDGE('',*,*,#8363,.F.);+#9369=ORIENTED_EDGE('',*,*,#8371,.T.);+#9370=ORIENTED_EDGE('',*,*,#9371,.T.);+#9371=EDGE_CURVE('',#8372,#9372,#9374,.T.);+#9372=VERTEX_POINT('',#9373);+#9373=CARTESIAN_POINT('',(-7.298480775301,-0.22,0.667364817767));+#9374=CIRCLE('',#9375,0.1);+#9375=AXIS2_PLACEMENT_3D('',#9376,#3937,#3938);+#9376=CARTESIAN_POINT('',(-7.2,-0.22,0.65));+#9377=ORIENTED_EDGE('',*,*,#9378,.T.);+#9378=EDGE_CURVE('',#9372,#9379,#9381,.T.);+#9379=VERTEX_POINT('',#9380);+#9380=CARTESIAN_POINT('',(-7.382385590716,-0.22,0.165270364467));+#9381=LINE('',#9373,#3944);+#9382=ORIENTED_EDGE('',*,*,#9383,.T.);+#9383=EDGE_CURVE('',#9379,#9384,#9386,.T.);+#9384=VERTEX_POINT('',#9385);+#9385=CARTESIAN_POINT('',(-7.579347141319,-0.22,1.387778780781E-16));+#9386=CIRCLE('',#9387,0.2);+#9387=AXIS2_PLACEMENT_3D('',#9388,#3953,#3954);+#9388=CARTESIAN_POINT('',(-7.579347141319,-0.22,0.2));+#9389=ORIENTED_EDGE('',*,*,#9390,.T.);+#9390=EDGE_CURVE('',#9384,#9391,#9393,.T.);+#9391=VERTEX_POINT('',#9392);+#9392=CARTESIAN_POINT('',(-8.,-0.22,1.387778780781E-16));+#9393=LINE('',#9385,#3928);+#9394=ORIENTED_EDGE('',*,*,#9395,.T.);+#9395=EDGE_CURVE('',#9391,#9396,#9398,.T.);+#9396=VERTEX_POINT('',#9397);+#9397=CARTESIAN_POINT('',(-8.,-0.22,0.1));+#9398=LINE('',#9392,#1074);+#9399=ORIENTED_EDGE('',*,*,#9400,.T.);+#9400=EDGE_CURVE('',#9396,#9401,#9403,.T.);+#9401=VERTEX_POINT('',#9402);+#9402=CARTESIAN_POINT('',(-7.579347141319,-0.22,0.1));+#9403=LINE('',#9397,#277);+#9404=ORIENTED_EDGE('',*,*,#9405,.T.);+#9405=EDGE_CURVE('',#9401,#9406,#9408,.T.);+#9406=VERTEX_POINT('',#9407);+#9407=CARTESIAN_POINT('',(-7.480866366018,-0.22,0.182635182233));+#9408=CIRCLE('',#9409,1.E-01);+#9409=AXIS2_PLACEMENT_3D('',#9388,#3937,#3976);+#9410=ORIENTED_EDGE('',*,*,#9411,.T.);+#9411=EDGE_CURVE('',#9406,#9412,#9414,.T.);+#9412=VERTEX_POINT('',#9413);+#9413=CARTESIAN_POINT('',(-7.396961550602,-0.22,0.684729635533));+#9414=LINE('',#9407,#3982);+#9415=ORIENTED_EDGE('',*,*,#9416,.T.);+#9416=EDGE_CURVE('',#9412,#4450,#9417,.T.);+#9417=CIRCLE('',#9418,0.2);+#9418=AXIS2_PLACEMENT_3D('',#9376,#1098,#3988);+#9419=ORIENTED_EDGE('',*,*,#4449,.T.);+#9420=PLANE('',#9421);+#9421=AXIS2_PLACEMENT_3D('',#9422,#1098,#13);+#9422=CARTESIAN_POINT('',(-7.414276639233,-0.22,0.410238158856));+#9423=ADVANCED_FACE('',(#9424),#9475,.T.);+#9424=FACE_BOUND('',#9425,.T.);+#9425=EDGE_LOOP('',(#8391,#8377,#9426,#9433,#9438,#9445,#9450,#9455,#9460,#9466,#9471,#4456));+#9426=ORIENTED_EDGE('',*,*,#9427,.T.);+#9427=EDGE_CURVE('',#8379,#9428,#9430,.T.);+#9428=VERTEX_POINT('',#9429);+#9429=CARTESIAN_POINT('',(-7.298480775301,0.22,0.667364817767));+#9430=CIRCLE('',#9431,0.1);+#9431=AXIS2_PLACEMENT_3D('',#9432,#3937,#3938);+#9432=CARTESIAN_POINT('',(-7.2,0.22,0.65));+#9433=ORIENTED_EDGE('',*,*,#9434,.T.);+#9434=EDGE_CURVE('',#9428,#9435,#9437,.T.);+#9435=VERTEX_POINT('',#9436);+#9436=CARTESIAN_POINT('',(-7.382385590716,0.22,0.165270364467));+#9437=LINE('',#9429,#3944);+#9438=ORIENTED_EDGE('',*,*,#9439,.T.);+#9439=EDGE_CURVE('',#9435,#9440,#9442,.T.);+#9440=VERTEX_POINT('',#9441);+#9441=CARTESIAN_POINT('',(-7.579347141319,0.22,1.387778780781E-16));+#9442=CIRCLE('',#9443,0.2);+#9443=AXIS2_PLACEMENT_3D('',#9444,#3953,#3954);+#9444=CARTESIAN_POINT('',(-7.579347141319,0.22,0.2));+#9445=ORIENTED_EDGE('',*,*,#9446,.T.);+#9446=EDGE_CURVE('',#9440,#9447,#9449,.T.);+#9447=VERTEX_POINT('',#9448);+#9448=CARTESIAN_POINT('',(-8.,0.22,1.387778780781E-16));+#9449=LINE('',#9441,#3928);+#9450=ORIENTED_EDGE('',*,*,#9451,.T.);+#9451=EDGE_CURVE('',#9447,#9452,#9454,.T.);+#9452=VERTEX_POINT('',#9453);+#9453=CARTESIAN_POINT('',(-8.,0.22,0.1));+#9454=LINE('',#9448,#1074);+#9455=ORIENTED_EDGE('',*,*,#9456,.T.);+#9456=EDGE_CURVE('',#9452,#9457,#9459,.T.);+#9457=VERTEX_POINT('',#9458);+#9458=CARTESIAN_POINT('',(-7.579347141319,0.22,0.1));+#9459=LINE('',#9453,#277);+#9460=ORIENTED_EDGE('',*,*,#9461,.T.);+#9461=EDGE_CURVE('',#9457,#9462,#9464,.T.);+#9462=VERTEX_POINT('',#9463);+#9463=CARTESIAN_POINT('',(-7.480866366018,0.22,0.182635182233));+#9464=CIRCLE('',#9465,1.E-01);+#9465=AXIS2_PLACEMENT_3D('',#9444,#3937,#3976);+#9466=ORIENTED_EDGE('',*,*,#9467,.T.);+#9467=EDGE_CURVE('',#9462,#9468,#9470,.T.);+#9468=VERTEX_POINT('',#9469);+#9469=CARTESIAN_POINT('',(-7.396961550602,0.22,0.684729635533));+#9470=LINE('',#9463,#3982);+#9471=ORIENTED_EDGE('',*,*,#9472,.T.);+#9472=EDGE_CURVE('',#9468,#4453,#9473,.T.);+#9473=CIRCLE('',#9474,0.2);+#9474=AXIS2_PLACEMENT_3D('',#9432,#1098,#3988);+#9475=PLANE('',#9476);+#9476=AXIS2_PLACEMENT_3D('',#9477,#1098,#13);+#9477=CARTESIAN_POINT('',(-7.414276639233,0.22,0.410238158856));+#9478=ADVANCED_FACE('',(#9479),#9486,.T.);+#9479=FACE_BOUND('',#9480,.F.);+#9480=EDGE_LOOP('',(#9481,#9471,#9484,#9485));+#9481=ORIENTED_EDGE('',*,*,#9482,.T.);+#9482=EDGE_CURVE('',#9412,#9468,#9483,.T.);+#9483=LINE('',#9413,#1097);+#9484=ORIENTED_EDGE('',*,*,#4452,.F.);+#9485=ORIENTED_EDGE('',*,*,#9416,.F.);+#9486=CYLINDRICAL_SURFACE('',#9487,0.2);+#9487=AXIS2_PLACEMENT_3D('',#9376,#3937,#3988);+#9488=ADVANCED_FACE('',(#9489),#9543,.F.);+#9489=FACE_BOUND('',#9490,.F.);+#9490=EDGE_LOOP('',(#9491,#9492,#9493,#9500,#9505,#9512,#9517,#9522,#9527,#9533,#9538,#9542));+#9491=ORIENTED_EDGE('',*,*,#8397,.F.);+#9492=ORIENTED_EDGE('',*,*,#8405,.T.);+#9493=ORIENTED_EDGE('',*,*,#9494,.T.);+#9494=EDGE_CURVE('',#8406,#9495,#9497,.T.);+#9495=VERTEX_POINT('',#9496);+#9496=CARTESIAN_POINT('',(-7.298480775301,0.78,0.667364817767));+#9497=CIRCLE('',#9498,0.1);+#9498=AXIS2_PLACEMENT_3D('',#9499,#3937,#3938);+#9499=CARTESIAN_POINT('',(-7.2,0.78,0.65));+#9500=ORIENTED_EDGE('',*,*,#9501,.T.);+#9501=EDGE_CURVE('',#9495,#9502,#9504,.T.);+#9502=VERTEX_POINT('',#9503);+#9503=CARTESIAN_POINT('',(-7.382385590716,0.78,0.165270364467));+#9504=LINE('',#9496,#3944);+#9505=ORIENTED_EDGE('',*,*,#9506,.T.);+#9506=EDGE_CURVE('',#9502,#9507,#9509,.T.);+#9507=VERTEX_POINT('',#9508);+#9508=CARTESIAN_POINT('',(-7.579347141319,0.78,1.387778780781E-16));+#9509=CIRCLE('',#9510,0.2);+#9510=AXIS2_PLACEMENT_3D('',#9511,#3953,#3954);+#9511=CARTESIAN_POINT('',(-7.579347141319,0.78,0.2));+#9512=ORIENTED_EDGE('',*,*,#9513,.T.);+#9513=EDGE_CURVE('',#9507,#9514,#9516,.T.);+#9514=VERTEX_POINT('',#9515);+#9515=CARTESIAN_POINT('',(-8.,0.78,1.387778780781E-16));+#9516=LINE('',#9508,#3928);+#9517=ORIENTED_EDGE('',*,*,#9518,.T.);+#9518=EDGE_CURVE('',#9514,#9519,#9521,.T.);+#9519=VERTEX_POINT('',#9520);+#9520=CARTESIAN_POINT('',(-8.,0.78,0.1));+#9521=LINE('',#9515,#1074);+#9522=ORIENTED_EDGE('',*,*,#9523,.T.);+#9523=EDGE_CURVE('',#9519,#9524,#9526,.T.);+#9524=VERTEX_POINT('',#9525);+#9525=CARTESIAN_POINT('',(-7.579347141319,0.78,0.1));+#9526=LINE('',#9520,#277);+#9527=ORIENTED_EDGE('',*,*,#9528,.T.);+#9528=EDGE_CURVE('',#9524,#9529,#9531,.T.);+#9529=VERTEX_POINT('',#9530);+#9530=CARTESIAN_POINT('',(-7.480866366018,0.78,0.182635182233));+#9531=CIRCLE('',#9532,1.E-01);+#9532=AXIS2_PLACEMENT_3D('',#9511,#3937,#3976);+#9533=ORIENTED_EDGE('',*,*,#9534,.T.);+#9534=EDGE_CURVE('',#9529,#9535,#9537,.T.);+#9535=VERTEX_POINT('',#9536);+#9536=CARTESIAN_POINT('',(-7.396961550602,0.78,0.684729635533));+#9537=LINE('',#9530,#3982);+#9538=ORIENTED_EDGE('',*,*,#9539,.T.);+#9539=EDGE_CURVE('',#9535,#4485,#9540,.T.);+#9540=CIRCLE('',#9541,0.2);+#9541=AXIS2_PLACEMENT_3D('',#9499,#1098,#3988);+#9542=ORIENTED_EDGE('',*,*,#4484,.T.);+#9543=PLANE('',#9544);+#9544=AXIS2_PLACEMENT_3D('',#9545,#1098,#13);+#9545=CARTESIAN_POINT('',(-7.414276639233,0.78,0.410238158856));+#9546=ADVANCED_FACE('',(#9547),#9598,.T.);+#9547=FACE_BOUND('',#9548,.T.);+#9548=EDGE_LOOP('',(#8425,#8411,#9549,#9556,#9561,#9568,#9573,#9578,#9583,#9589,#9594,#4491));+#9549=ORIENTED_EDGE('',*,*,#9550,.T.);+#9550=EDGE_CURVE('',#8413,#9551,#9553,.T.);+#9551=VERTEX_POINT('',#9552);+#9552=CARTESIAN_POINT('',(-7.298480775301,1.22,0.667364817767));+#9553=CIRCLE('',#9554,0.1);+#9554=AXIS2_PLACEMENT_3D('',#9555,#3937,#3938);+#9555=CARTESIAN_POINT('',(-7.2,1.22,0.65));+#9556=ORIENTED_EDGE('',*,*,#9557,.T.);+#9557=EDGE_CURVE('',#9551,#9558,#9560,.T.);+#9558=VERTEX_POINT('',#9559);+#9559=CARTESIAN_POINT('',(-7.382385590716,1.22,0.165270364467));+#9560=LINE('',#9552,#3944);+#9561=ORIENTED_EDGE('',*,*,#9562,.T.);+#9562=EDGE_CURVE('',#9558,#9563,#9565,.T.);+#9563=VERTEX_POINT('',#9564);+#9564=CARTESIAN_POINT('',(-7.579347141319,1.22,1.387778780781E-16));+#9565=CIRCLE('',#9566,0.2);+#9566=AXIS2_PLACEMENT_3D('',#9567,#3953,#3954);+#9567=CARTESIAN_POINT('',(-7.579347141319,1.22,0.2));+#9568=ORIENTED_EDGE('',*,*,#9569,.T.);+#9569=EDGE_CURVE('',#9563,#9570,#9572,.T.);+#9570=VERTEX_POINT('',#9571);+#9571=CARTESIAN_POINT('',(-8.,1.22,1.387778780781E-16));+#9572=LINE('',#9564,#3928);+#9573=ORIENTED_EDGE('',*,*,#9574,.T.);+#9574=EDGE_CURVE('',#9570,#9575,#9577,.T.);+#9575=VERTEX_POINT('',#9576);+#9576=CARTESIAN_POINT('',(-8.,1.22,0.1));+#9577=LINE('',#9571,#1074);+#9578=ORIENTED_EDGE('',*,*,#9579,.T.);+#9579=EDGE_CURVE('',#9575,#9580,#9582,.T.);+#9580=VERTEX_POINT('',#9581);+#9581=CARTESIAN_POINT('',(-7.579347141319,1.22,0.1));+#9582=LINE('',#9576,#277);+#9583=ORIENTED_EDGE('',*,*,#9584,.T.);+#9584=EDGE_CURVE('',#9580,#9585,#9587,.T.);+#9585=VERTEX_POINT('',#9586);+#9586=CARTESIAN_POINT('',(-7.480866366018,1.22,0.182635182233));+#9587=CIRCLE('',#9588,1.E-01);+#9588=AXIS2_PLACEMENT_3D('',#9567,#3937,#3976);+#9589=ORIENTED_EDGE('',*,*,#9590,.T.);+#9590=EDGE_CURVE('',#9585,#9591,#9593,.T.);+#9591=VERTEX_POINT('',#9592);+#9592=CARTESIAN_POINT('',(-7.396961550602,1.22,0.684729635533));+#9593=LINE('',#9586,#3982);+#9594=ORIENTED_EDGE('',*,*,#9595,.T.);+#9595=EDGE_CURVE('',#9591,#4488,#9596,.T.);+#9596=CIRCLE('',#9597,0.2);+#9597=AXIS2_PLACEMENT_3D('',#9555,#1098,#3988);+#9598=PLANE('',#9599);+#9599=AXIS2_PLACEMENT_3D('',#9600,#1098,#13);+#9600=CARTESIAN_POINT('',(-7.414276639233,1.22,0.410238158856));+#9601=ADVANCED_FACE('',(#9602),#9609,.T.);+#9602=FACE_BOUND('',#9603,.F.);+#9603=EDGE_LOOP('',(#9604,#9594,#9607,#9608));+#9604=ORIENTED_EDGE('',*,*,#9605,.T.);+#9605=EDGE_CURVE('',#9535,#9591,#9606,.T.);+#9606=LINE('',#9536,#1097);+#9607=ORIENTED_EDGE('',*,*,#4487,.F.);+#9608=ORIENTED_EDGE('',*,*,#9539,.F.);+#9609=CYLINDRICAL_SURFACE('',#9610,0.2);+#9610=AXIS2_PLACEMENT_3D('',#9499,#3937,#3988);+#9611=ADVANCED_FACE('',(#9612),#9666,.F.);+#9612=FACE_BOUND('',#9613,.F.);+#9613=EDGE_LOOP('',(#9614,#9615,#9616,#9623,#9628,#9635,#9640,#9645,#9650,#9656,#9661,#9665));+#9614=ORIENTED_EDGE('',*,*,#8431,.F.);+#9615=ORIENTED_EDGE('',*,*,#8439,.T.);+#9616=ORIENTED_EDGE('',*,*,#9617,.T.);+#9617=EDGE_CURVE('',#8440,#9618,#9620,.T.);+#9618=VERTEX_POINT('',#9619);+#9619=CARTESIAN_POINT('',(-7.298480775301,1.78,0.667364817767));+#9620=CIRCLE('',#9621,0.1);+#9621=AXIS2_PLACEMENT_3D('',#9622,#3937,#3938);+#9622=CARTESIAN_POINT('',(-7.2,1.78,0.65));+#9623=ORIENTED_EDGE('',*,*,#9624,.T.);+#9624=EDGE_CURVE('',#9618,#9625,#9627,.T.);+#9625=VERTEX_POINT('',#9626);+#9626=CARTESIAN_POINT('',(-7.382385590716,1.78,0.165270364467));+#9627=LINE('',#9619,#3944);+#9628=ORIENTED_EDGE('',*,*,#9629,.T.);+#9629=EDGE_CURVE('',#9625,#9630,#9632,.T.);+#9630=VERTEX_POINT('',#9631);+#9631=CARTESIAN_POINT('',(-7.579347141319,1.78,1.387778780781E-16));+#9632=CIRCLE('',#9633,0.2);+#9633=AXIS2_PLACEMENT_3D('',#9634,#3953,#3954);+#9634=CARTESIAN_POINT('',(-7.579347141319,1.78,0.2));+#9635=ORIENTED_EDGE('',*,*,#9636,.T.);+#9636=EDGE_CURVE('',#9630,#9637,#9639,.T.);+#9637=VERTEX_POINT('',#9638);+#9638=CARTESIAN_POINT('',(-8.,1.78,1.387778780781E-16));+#9639=LINE('',#9631,#3928);+#9640=ORIENTED_EDGE('',*,*,#9641,.T.);+#9641=EDGE_CURVE('',#9637,#9642,#9644,.T.);+#9642=VERTEX_POINT('',#9643);+#9643=CARTESIAN_POINT('',(-8.,1.78,0.1));+#9644=LINE('',#9638,#1074);+#9645=ORIENTED_EDGE('',*,*,#9646,.T.);+#9646=EDGE_CURVE('',#9642,#9647,#9649,.T.);+#9647=VERTEX_POINT('',#9648);+#9648=CARTESIAN_POINT('',(-7.579347141319,1.78,0.1));+#9649=LINE('',#9643,#277);+#9650=ORIENTED_EDGE('',*,*,#9651,.T.);+#9651=EDGE_CURVE('',#9647,#9652,#9654,.T.);+#9652=VERTEX_POINT('',#9653);+#9653=CARTESIAN_POINT('',(-7.480866366018,1.78,0.182635182233));+#9654=CIRCLE('',#9655,1.E-01);+#9655=AXIS2_PLACEMENT_3D('',#9634,#3937,#3976);+#9656=ORIENTED_EDGE('',*,*,#9657,.T.);+#9657=EDGE_CURVE('',#9652,#9658,#9660,.T.);+#9658=VERTEX_POINT('',#9659);+#9659=CARTESIAN_POINT('',(-7.396961550602,1.78,0.684729635533));+#9660=LINE('',#9653,#3982);+#9661=ORIENTED_EDGE('',*,*,#9662,.T.);+#9662=EDGE_CURVE('',#9658,#4520,#9663,.T.);+#9663=CIRCLE('',#9664,0.2);+#9664=AXIS2_PLACEMENT_3D('',#9622,#1098,#3988);+#9665=ORIENTED_EDGE('',*,*,#4519,.T.);+#9666=PLANE('',#9667);+#9667=AXIS2_PLACEMENT_3D('',#9668,#1098,#13);+#9668=CARTESIAN_POINT('',(-7.414276639233,1.78,0.410238158856));+#9669=ADVANCED_FACE('',(#9670),#9721,.T.);+#9670=FACE_BOUND('',#9671,.T.);+#9671=EDGE_LOOP('',(#8459,#8445,#9672,#9679,#9684,#9691,#9696,#9701,#9706,#9712,#9717,#4526));+#9672=ORIENTED_EDGE('',*,*,#9673,.T.);+#9673=EDGE_CURVE('',#8447,#9674,#9676,.T.);+#9674=VERTEX_POINT('',#9675);+#9675=CARTESIAN_POINT('',(-7.298480775301,2.22,0.667364817767));+#9676=CIRCLE('',#9677,0.1);+#9677=AXIS2_PLACEMENT_3D('',#9678,#3937,#3938);+#9678=CARTESIAN_POINT('',(-7.2,2.22,0.65));+#9679=ORIENTED_EDGE('',*,*,#9680,.T.);+#9680=EDGE_CURVE('',#9674,#9681,#9683,.T.);+#9681=VERTEX_POINT('',#9682);+#9682=CARTESIAN_POINT('',(-7.382385590716,2.22,0.165270364467));+#9683=LINE('',#9675,#3944);+#9684=ORIENTED_EDGE('',*,*,#9685,.T.);+#9685=EDGE_CURVE('',#9681,#9686,#9688,.T.);+#9686=VERTEX_POINT('',#9687);+#9687=CARTESIAN_POINT('',(-7.579347141319,2.22,1.387778780781E-16));+#9688=CIRCLE('',#9689,0.2);+#9689=AXIS2_PLACEMENT_3D('',#9690,#3953,#3954);+#9690=CARTESIAN_POINT('',(-7.579347141319,2.22,0.2));+#9691=ORIENTED_EDGE('',*,*,#9692,.T.);+#9692=EDGE_CURVE('',#9686,#9693,#9695,.T.);+#9693=VERTEX_POINT('',#9694);+#9694=CARTESIAN_POINT('',(-8.,2.22,1.387778780781E-16));+#9695=LINE('',#9687,#3928);+#9696=ORIENTED_EDGE('',*,*,#9697,.T.);+#9697=EDGE_CURVE('',#9693,#9698,#9700,.T.);+#9698=VERTEX_POINT('',#9699);+#9699=CARTESIAN_POINT('',(-8.,2.22,0.1));+#9700=LINE('',#9694,#1074);+#9701=ORIENTED_EDGE('',*,*,#9702,.T.);+#9702=EDGE_CURVE('',#9698,#9703,#9705,.T.);+#9703=VERTEX_POINT('',#9704);+#9704=CARTESIAN_POINT('',(-7.579347141319,2.22,0.1));+#9705=LINE('',#9699,#277);+#9706=ORIENTED_EDGE('',*,*,#9707,.T.);+#9707=EDGE_CURVE('',#9703,#9708,#9710,.T.);+#9708=VERTEX_POINT('',#9709);+#9709=CARTESIAN_POINT('',(-7.480866366018,2.22,0.182635182233));+#9710=CIRCLE('',#9711,1.E-01);+#9711=AXIS2_PLACEMENT_3D('',#9690,#3937,#3976);+#9712=ORIENTED_EDGE('',*,*,#9713,.T.);+#9713=EDGE_CURVE('',#9708,#9714,#9716,.T.);+#9714=VERTEX_POINT('',#9715);+#9715=CARTESIAN_POINT('',(-7.396961550602,2.22,0.684729635533));+#9716=LINE('',#9709,#3982);+#9717=ORIENTED_EDGE('',*,*,#9718,.T.);+#9718=EDGE_CURVE('',#9714,#4523,#9719,.T.);+#9719=CIRCLE('',#9720,0.2);+#9720=AXIS2_PLACEMENT_3D('',#9678,#1098,#3988);+#9721=PLANE('',#9722);+#9722=AXIS2_PLACEMENT_3D('',#9723,#1098,#13);+#9723=CARTESIAN_POINT('',(-7.414276639233,2.22,0.410238158856));+#9724=ADVANCED_FACE('',(#9725),#9732,.T.);+#9725=FACE_BOUND('',#9726,.F.);+#9726=EDGE_LOOP('',(#9727,#9717,#9730,#9731));+#9727=ORIENTED_EDGE('',*,*,#9728,.T.);+#9728=EDGE_CURVE('',#9658,#9714,#9729,.T.);+#9729=LINE('',#9659,#1097);+#9730=ORIENTED_EDGE('',*,*,#4522,.F.);+#9731=ORIENTED_EDGE('',*,*,#9662,.F.);+#9732=CYLINDRICAL_SURFACE('',#9733,0.2);+#9733=AXIS2_PLACEMENT_3D('',#9622,#3937,#3988);+#9734=ADVANCED_FACE('',(#9735),#9789,.F.);+#9735=FACE_BOUND('',#9736,.F.);+#9736=EDGE_LOOP('',(#9737,#9738,#9739,#9746,#9751,#9758,#9763,#9768,#9773,#9779,#9784,#9788));+#9737=ORIENTED_EDGE('',*,*,#8465,.F.);+#9738=ORIENTED_EDGE('',*,*,#8473,.T.);+#9739=ORIENTED_EDGE('',*,*,#9740,.T.);+#9740=EDGE_CURVE('',#8474,#9741,#9743,.T.);+#9741=VERTEX_POINT('',#9742);+#9742=CARTESIAN_POINT('',(-7.298480775301,2.78,0.667364817767));+#9743=CIRCLE('',#9744,0.1);+#9744=AXIS2_PLACEMENT_3D('',#9745,#3937,#3938);+#9745=CARTESIAN_POINT('',(-7.2,2.78,0.65));+#9746=ORIENTED_EDGE('',*,*,#9747,.T.);+#9747=EDGE_CURVE('',#9741,#9748,#9750,.T.);+#9748=VERTEX_POINT('',#9749);+#9749=CARTESIAN_POINT('',(-7.382385590716,2.78,0.165270364467));+#9750=LINE('',#9742,#3944);+#9751=ORIENTED_EDGE('',*,*,#9752,.T.);+#9752=EDGE_CURVE('',#9748,#9753,#9755,.T.);+#9753=VERTEX_POINT('',#9754);+#9754=CARTESIAN_POINT('',(-7.579347141319,2.78,1.387778780781E-16));+#9755=CIRCLE('',#9756,0.2);+#9756=AXIS2_PLACEMENT_3D('',#9757,#3953,#3954);+#9757=CARTESIAN_POINT('',(-7.579347141319,2.78,0.2));+#9758=ORIENTED_EDGE('',*,*,#9759,.T.);+#9759=EDGE_CURVE('',#9753,#9760,#9762,.T.);+#9760=VERTEX_POINT('',#9761);+#9761=CARTESIAN_POINT('',(-8.,2.78,1.387778780781E-16));+#9762=LINE('',#9754,#3928);+#9763=ORIENTED_EDGE('',*,*,#9764,.T.);+#9764=EDGE_CURVE('',#9760,#9765,#9767,.T.);+#9765=VERTEX_POINT('',#9766);+#9766=CARTESIAN_POINT('',(-8.,2.78,0.1));+#9767=LINE('',#9761,#1074);+#9768=ORIENTED_EDGE('',*,*,#9769,.T.);+#9769=EDGE_CURVE('',#9765,#9770,#9772,.T.);+#9770=VERTEX_POINT('',#9771);+#9771=CARTESIAN_POINT('',(-7.579347141319,2.78,0.1));+#9772=LINE('',#9766,#277);+#9773=ORIENTED_EDGE('',*,*,#9774,.T.);+#9774=EDGE_CURVE('',#9770,#9775,#9777,.T.);+#9775=VERTEX_POINT('',#9776);+#9776=CARTESIAN_POINT('',(-7.480866366018,2.78,0.182635182233));+#9777=CIRCLE('',#9778,1.E-01);+#9778=AXIS2_PLACEMENT_3D('',#9757,#3937,#3976);+#9779=ORIENTED_EDGE('',*,*,#9780,.T.);+#9780=EDGE_CURVE('',#9775,#9781,#9783,.T.);+#9781=VERTEX_POINT('',#9782);+#9782=CARTESIAN_POINT('',(-7.396961550602,2.78,0.684729635533));+#9783=LINE('',#9776,#3982);+#9784=ORIENTED_EDGE('',*,*,#9785,.T.);+#9785=EDGE_CURVE('',#9781,#4555,#9786,.T.);+#9786=CIRCLE('',#9787,0.2);+#9787=AXIS2_PLACEMENT_3D('',#9745,#1098,#3988);+#9788=ORIENTED_EDGE('',*,*,#4554,.T.);+#9789=PLANE('',#9790);+#9790=AXIS2_PLACEMENT_3D('',#9791,#1098,#13);+#9791=CARTESIAN_POINT('',(-7.414276639233,2.78,0.410238158856));+#9792=ADVANCED_FACE('',(#9793),#9844,.T.);+#9793=FACE_BOUND('',#9794,.T.);+#9794=EDGE_LOOP('',(#8493,#8479,#9795,#9802,#9807,#9814,#9819,#9824,#9829,#9835,#9840,#4561));+#9795=ORIENTED_EDGE('',*,*,#9796,.T.);+#9796=EDGE_CURVE('',#8481,#9797,#9799,.T.);+#9797=VERTEX_POINT('',#9798);+#9798=CARTESIAN_POINT('',(-7.298480775301,3.22,0.667364817767));+#9799=CIRCLE('',#9800,0.1);+#9800=AXIS2_PLACEMENT_3D('',#9801,#3937,#3938);+#9801=CARTESIAN_POINT('',(-7.2,3.22,0.65));+#9802=ORIENTED_EDGE('',*,*,#9803,.T.);+#9803=EDGE_CURVE('',#9797,#9804,#9806,.T.);+#9804=VERTEX_POINT('',#9805);+#9805=CARTESIAN_POINT('',(-7.382385590716,3.22,0.165270364467));+#9806=LINE('',#9798,#3944);+#9807=ORIENTED_EDGE('',*,*,#9808,.T.);+#9808=EDGE_CURVE('',#9804,#9809,#9811,.T.);+#9809=VERTEX_POINT('',#9810);+#9810=CARTESIAN_POINT('',(-7.579347141319,3.22,1.387778780781E-16));+#9811=CIRCLE('',#9812,0.2);+#9812=AXIS2_PLACEMENT_3D('',#9813,#3953,#3954);+#9813=CARTESIAN_POINT('',(-7.579347141319,3.22,0.2));+#9814=ORIENTED_EDGE('',*,*,#9815,.T.);+#9815=EDGE_CURVE('',#9809,#9816,#9818,.T.);+#9816=VERTEX_POINT('',#9817);+#9817=CARTESIAN_POINT('',(-8.,3.22,1.387778780781E-16));+#9818=LINE('',#9810,#3928);+#9819=ORIENTED_EDGE('',*,*,#9820,.T.);+#9820=EDGE_CURVE('',#9816,#9821,#9823,.T.);+#9821=VERTEX_POINT('',#9822);+#9822=CARTESIAN_POINT('',(-8.,3.22,0.1));+#9823=LINE('',#9817,#1074);+#9824=ORIENTED_EDGE('',*,*,#9825,.T.);+#9825=EDGE_CURVE('',#9821,#9826,#9828,.T.);+#9826=VERTEX_POINT('',#9827);+#9827=CARTESIAN_POINT('',(-7.579347141319,3.22,0.1));+#9828=LINE('',#9822,#277);+#9829=ORIENTED_EDGE('',*,*,#9830,.T.);+#9830=EDGE_CURVE('',#9826,#9831,#9833,.T.);+#9831=VERTEX_POINT('',#9832);+#9832=CARTESIAN_POINT('',(-7.480866366018,3.22,0.182635182233));+#9833=CIRCLE('',#9834,1.E-01);+#9834=AXIS2_PLACEMENT_3D('',#9813,#3937,#3976);+#9835=ORIENTED_EDGE('',*,*,#9836,.T.);+#9836=EDGE_CURVE('',#9831,#9837,#9839,.T.);+#9837=VERTEX_POINT('',#9838);+#9838=CARTESIAN_POINT('',(-7.396961550602,3.22,0.684729635533));+#9839=LINE('',#9832,#3982);+#9840=ORIENTED_EDGE('',*,*,#9841,.T.);+#9841=EDGE_CURVE('',#9837,#4558,#9842,.T.);+#9842=CIRCLE('',#9843,0.2);+#9843=AXIS2_PLACEMENT_3D('',#9801,#1098,#3988);+#9844=PLANE('',#9845);+#9845=AXIS2_PLACEMENT_3D('',#9846,#1098,#13);+#9846=CARTESIAN_POINT('',(-7.414276639233,3.22,0.410238158856));+#9847=ADVANCED_FACE('',(#9848),#9855,.T.);+#9848=FACE_BOUND('',#9849,.F.);+#9849=EDGE_LOOP('',(#9850,#9840,#9853,#9854));+#9850=ORIENTED_EDGE('',*,*,#9851,.T.);+#9851=EDGE_CURVE('',#9781,#9837,#9852,.T.);+#9852=LINE('',#9782,#1097);+#9853=ORIENTED_EDGE('',*,*,#4557,.F.);+#9854=ORIENTED_EDGE('',*,*,#9785,.F.);+#9855=CYLINDRICAL_SURFACE('',#9856,0.2);+#9856=AXIS2_PLACEMENT_3D('',#9745,#3937,#3988);+#9857=ADVANCED_FACE('',(#9858),#9912,.F.);+#9858=FACE_BOUND('',#9859,.F.);+#9859=EDGE_LOOP('',(#9860,#9861,#9862,#9869,#9874,#9881,#9886,#9891,#9896,#9902,#9907,#9911));+#9860=ORIENTED_EDGE('',*,*,#8499,.F.);+#9861=ORIENTED_EDGE('',*,*,#8507,.T.);+#9862=ORIENTED_EDGE('',*,*,#9863,.T.);+#9863=EDGE_CURVE('',#8508,#9864,#9866,.T.);+#9864=VERTEX_POINT('',#9865);+#9865=CARTESIAN_POINT('',(-7.298480775301,3.78,0.667364817767));+#9866=CIRCLE('',#9867,0.1);+#9867=AXIS2_PLACEMENT_3D('',#9868,#3937,#3938);+#9868=CARTESIAN_POINT('',(-7.2,3.78,0.65));+#9869=ORIENTED_EDGE('',*,*,#9870,.T.);+#9870=EDGE_CURVE('',#9864,#9871,#9873,.T.);+#9871=VERTEX_POINT('',#9872);+#9872=CARTESIAN_POINT('',(-7.382385590716,3.78,0.165270364467));+#9873=LINE('',#9865,#3944);+#9874=ORIENTED_EDGE('',*,*,#9875,.T.);+#9875=EDGE_CURVE('',#9871,#9876,#9878,.T.);+#9876=VERTEX_POINT('',#9877);+#9877=CARTESIAN_POINT('',(-7.579347141319,3.78,1.387778780781E-16));+#9878=CIRCLE('',#9879,0.2);+#9879=AXIS2_PLACEMENT_3D('',#9880,#3953,#3954);+#9880=CARTESIAN_POINT('',(-7.579347141319,3.78,0.2));+#9881=ORIENTED_EDGE('',*,*,#9882,.T.);+#9882=EDGE_CURVE('',#9876,#9883,#9885,.T.);+#9883=VERTEX_POINT('',#9884);+#9884=CARTESIAN_POINT('',(-8.,3.78,1.387778780781E-16));+#9885=LINE('',#9877,#3928);+#9886=ORIENTED_EDGE('',*,*,#9887,.T.);+#9887=EDGE_CURVE('',#9883,#9888,#9890,.T.);+#9888=VERTEX_POINT('',#9889);+#9889=CARTESIAN_POINT('',(-8.,3.78,0.1));+#9890=LINE('',#9884,#1074);+#9891=ORIENTED_EDGE('',*,*,#9892,.T.);+#9892=EDGE_CURVE('',#9888,#9893,#9895,.T.);+#9893=VERTEX_POINT('',#9894);+#9894=CARTESIAN_POINT('',(-7.579347141319,3.78,0.1));+#9895=LINE('',#9889,#277);+#9896=ORIENTED_EDGE('',*,*,#9897,.T.);+#9897=EDGE_CURVE('',#9893,#9898,#9900,.T.);+#9898=VERTEX_POINT('',#9899);+#9899=CARTESIAN_POINT('',(-7.480866366018,3.78,0.182635182233));+#9900=CIRCLE('',#9901,1.E-01);+#9901=AXIS2_PLACEMENT_3D('',#9880,#3937,#3976);+#9902=ORIENTED_EDGE('',*,*,#9903,.T.);+#9903=EDGE_CURVE('',#9898,#9904,#9906,.T.);+#9904=VERTEX_POINT('',#9905);+#9905=CARTESIAN_POINT('',(-7.396961550602,3.78,0.684729635533));+#9906=LINE('',#9899,#3982);+#9907=ORIENTED_EDGE('',*,*,#9908,.T.);+#9908=EDGE_CURVE('',#9904,#4590,#9909,.T.);+#9909=CIRCLE('',#9910,0.2);+#9910=AXIS2_PLACEMENT_3D('',#9868,#1098,#3988);+#9911=ORIENTED_EDGE('',*,*,#4589,.T.);+#9912=PLANE('',#9913);+#9913=AXIS2_PLACEMENT_3D('',#9914,#1098,#13);+#9914=CARTESIAN_POINT('',(-7.414276639233,3.78,0.410238158856));+#9915=ADVANCED_FACE('',(#9916),#9967,.T.);+#9916=FACE_BOUND('',#9917,.T.);+#9917=EDGE_LOOP('',(#8527,#8513,#9918,#9925,#9930,#9937,#9942,#9947,#9952,#9958,#9963,#4596));+#9918=ORIENTED_EDGE('',*,*,#9919,.T.);+#9919=EDGE_CURVE('',#8515,#9920,#9922,.T.);+#9920=VERTEX_POINT('',#9921);+#9921=CARTESIAN_POINT('',(-7.298480775301,4.22,0.667364817767));+#9922=CIRCLE('',#9923,0.1);+#9923=AXIS2_PLACEMENT_3D('',#9924,#3937,#3938);+#9924=CARTESIAN_POINT('',(-7.2,4.22,0.65));+#9925=ORIENTED_EDGE('',*,*,#9926,.T.);+#9926=EDGE_CURVE('',#9920,#9927,#9929,.T.);+#9927=VERTEX_POINT('',#9928);+#9928=CARTESIAN_POINT('',(-7.382385590716,4.22,0.165270364467));+#9929=LINE('',#9921,#3944);+#9930=ORIENTED_EDGE('',*,*,#9931,.T.);+#9931=EDGE_CURVE('',#9927,#9932,#9934,.T.);+#9932=VERTEX_POINT('',#9933);+#9933=CARTESIAN_POINT('',(-7.579347141319,4.22,1.387778780781E-16));+#9934=CIRCLE('',#9935,0.2);+#9935=AXIS2_PLACEMENT_3D('',#9936,#3953,#3954);+#9936=CARTESIAN_POINT('',(-7.579347141319,4.22,0.2));+#9937=ORIENTED_EDGE('',*,*,#9938,.T.);+#9938=EDGE_CURVE('',#9932,#9939,#9941,.T.);+#9939=VERTEX_POINT('',#9940);+#9940=CARTESIAN_POINT('',(-8.,4.22,1.387778780781E-16));+#9941=LINE('',#9933,#3928);+#9942=ORIENTED_EDGE('',*,*,#9943,.T.);+#9943=EDGE_CURVE('',#9939,#9944,#9946,.T.);+#9944=VERTEX_POINT('',#9945);+#9945=CARTESIAN_POINT('',(-8.,4.22,0.1));+#9946=LINE('',#9940,#1074);+#9947=ORIENTED_EDGE('',*,*,#9948,.T.);+#9948=EDGE_CURVE('',#9944,#9949,#9951,.T.);+#9949=VERTEX_POINT('',#9950);+#9950=CARTESIAN_POINT('',(-7.579347141319,4.22,0.1));+#9951=LINE('',#9945,#277);+#9952=ORIENTED_EDGE('',*,*,#9953,.T.);+#9953=EDGE_CURVE('',#9949,#9954,#9956,.T.);+#9954=VERTEX_POINT('',#9955);+#9955=CARTESIAN_POINT('',(-7.480866366018,4.22,0.182635182233));+#9956=CIRCLE('',#9957,1.E-01);+#9957=AXIS2_PLACEMENT_3D('',#9936,#3937,#3976);+#9958=ORIENTED_EDGE('',*,*,#9959,.T.);+#9959=EDGE_CURVE('',#9954,#9960,#9962,.T.);+#9960=VERTEX_POINT('',#9961);+#9961=CARTESIAN_POINT('',(-7.396961550602,4.22,0.684729635533));+#9962=LINE('',#9955,#3982);+#9963=ORIENTED_EDGE('',*,*,#9964,.T.);+#9964=EDGE_CURVE('',#9960,#4593,#9965,.T.);+#9965=CIRCLE('',#9966,0.2);+#9966=AXIS2_PLACEMENT_3D('',#9924,#1098,#3988);+#9967=PLANE('',#9968);+#9968=AXIS2_PLACEMENT_3D('',#9969,#1098,#13);+#9969=CARTESIAN_POINT('',(-7.414276639233,4.22,0.410238158856));+#9970=ADVANCED_FACE('',(#9971),#9978,.T.);+#9971=FACE_BOUND('',#9972,.F.);+#9972=EDGE_LOOP('',(#9973,#9963,#9976,#9977));+#9973=ORIENTED_EDGE('',*,*,#9974,.T.);+#9974=EDGE_CURVE('',#9904,#9960,#9975,.T.);+#9975=LINE('',#9905,#1097);+#9976=ORIENTED_EDGE('',*,*,#4592,.F.);+#9977=ORIENTED_EDGE('',*,*,#9908,.F.);+#9978=CYLINDRICAL_SURFACE('',#9979,0.2);+#9979=AXIS2_PLACEMENT_3D('',#9868,#3937,#3988);+#9980=ADVANCED_FACE('',(#9981),#10035,.F.);+#9981=FACE_BOUND('',#9982,.F.);+#9982=EDGE_LOOP('',(#9983,#9984,#9985,#9992,#9997,#10004,#10009,#10014,#10019,#10025,#10030,#10034));+#9983=ORIENTED_EDGE('',*,*,#8533,.F.);+#9984=ORIENTED_EDGE('',*,*,#8541,.T.);+#9985=ORIENTED_EDGE('',*,*,#9986,.T.);+#9986=EDGE_CURVE('',#8542,#9987,#9989,.T.);+#9987=VERTEX_POINT('',#9988);+#9988=CARTESIAN_POINT('',(-7.298480775301,4.78,0.667364817767));+#9989=CIRCLE('',#9990,0.1);+#9990=AXIS2_PLACEMENT_3D('',#9991,#3937,#3938);+#9991=CARTESIAN_POINT('',(-7.2,4.78,0.65));+#9992=ORIENTED_EDGE('',*,*,#9993,.T.);+#9993=EDGE_CURVE('',#9987,#9994,#9996,.T.);+#9994=VERTEX_POINT('',#9995);+#9995=CARTESIAN_POINT('',(-7.382385590716,4.78,0.165270364467));+#9996=LINE('',#9988,#3944);+#9997=ORIENTED_EDGE('',*,*,#9998,.T.);+#9998=EDGE_CURVE('',#9994,#9999,#10001,.T.);+#9999=VERTEX_POINT('',#10000);+#10000=CARTESIAN_POINT('',(-7.579347141319,4.78,1.387778780781E-16));+#10001=CIRCLE('',#10002,0.2);+#10002=AXIS2_PLACEMENT_3D('',#10003,#3953,#3954);+#10003=CARTESIAN_POINT('',(-7.579347141319,4.78,0.2));+#10004=ORIENTED_EDGE('',*,*,#10005,.T.);+#10005=EDGE_CURVE('',#9999,#10006,#10008,.T.);+#10006=VERTEX_POINT('',#10007);+#10007=CARTESIAN_POINT('',(-8.,4.78,1.387778780781E-16));+#10008=LINE('',#10000,#3928);+#10009=ORIENTED_EDGE('',*,*,#10010,.T.);+#10010=EDGE_CURVE('',#10006,#10011,#10013,.T.);+#10011=VERTEX_POINT('',#10012);+#10012=CARTESIAN_POINT('',(-8.,4.78,0.1));+#10013=LINE('',#10007,#1074);+#10014=ORIENTED_EDGE('',*,*,#10015,.T.);+#10015=EDGE_CURVE('',#10011,#10016,#10018,.T.);+#10016=VERTEX_POINT('',#10017);+#10017=CARTESIAN_POINT('',(-7.579347141319,4.78,0.1));+#10018=LINE('',#10012,#277);+#10019=ORIENTED_EDGE('',*,*,#10020,.T.);+#10020=EDGE_CURVE('',#10016,#10021,#10023,.T.);+#10021=VERTEX_POINT('',#10022);+#10022=CARTESIAN_POINT('',(-7.480866366018,4.78,0.182635182233));+#10023=CIRCLE('',#10024,1.E-01);+#10024=AXIS2_PLACEMENT_3D('',#10003,#3937,#3976);+#10025=ORIENTED_EDGE('',*,*,#10026,.T.);+#10026=EDGE_CURVE('',#10021,#10027,#10029,.T.);+#10027=VERTEX_POINT('',#10028);+#10028=CARTESIAN_POINT('',(-7.396961550602,4.78,0.684729635533));+#10029=LINE('',#10022,#3982);+#10030=ORIENTED_EDGE('',*,*,#10031,.T.);+#10031=EDGE_CURVE('',#10027,#4625,#10032,.T.);+#10032=CIRCLE('',#10033,0.2);+#10033=AXIS2_PLACEMENT_3D('',#9991,#1098,#3988);+#10034=ORIENTED_EDGE('',*,*,#4624,.T.);+#10035=PLANE('',#10036);+#10036=AXIS2_PLACEMENT_3D('',#10037,#1098,#13);+#10037=CARTESIAN_POINT('',(-7.414276639233,4.78,0.410238158856));+#10038=ADVANCED_FACE('',(#10039),#10090,.T.);+#10039=FACE_BOUND('',#10040,.T.);+#10040=EDGE_LOOP('',(#8561,#8547,#10041,#10048,#10053,#10060,#10065,#10070,#10075,#10081,#10086,#4630));+#10041=ORIENTED_EDGE('',*,*,#10042,.T.);+#10042=EDGE_CURVE('',#8549,#10043,#10045,.T.);+#10043=VERTEX_POINT('',#10044);+#10044=CARTESIAN_POINT('',(-7.298480775301,5.22,0.667364817767));+#10045=CIRCLE('',#10046,0.1);+#10046=AXIS2_PLACEMENT_3D('',#10047,#3937,#3938);+#10047=CARTESIAN_POINT('',(-7.2,5.22,0.65));+#10048=ORIENTED_EDGE('',*,*,#10049,.T.);+#10049=EDGE_CURVE('',#10043,#10050,#10052,.T.);+#10050=VERTEX_POINT('',#10051);+#10051=CARTESIAN_POINT('',(-7.382385590716,5.22,0.165270364467));+#10052=LINE('',#10044,#3944);+#10053=ORIENTED_EDGE('',*,*,#10054,.T.);+#10054=EDGE_CURVE('',#10050,#10055,#10057,.T.);+#10055=VERTEX_POINT('',#10056);+#10056=CARTESIAN_POINT('',(-7.579347141319,5.22,1.387778780781E-16));+#10057=CIRCLE('',#10058,0.2);+#10058=AXIS2_PLACEMENT_3D('',#10059,#3953,#3954);+#10059=CARTESIAN_POINT('',(-7.579347141319,5.22,0.2));+#10060=ORIENTED_EDGE('',*,*,#10061,.T.);+#10061=EDGE_CURVE('',#10055,#10062,#10064,.T.);+#10062=VERTEX_POINT('',#10063);+#10063=CARTESIAN_POINT('',(-8.,5.22,1.387778780781E-16));+#10064=LINE('',#10056,#3928);+#10065=ORIENTED_EDGE('',*,*,#10066,.T.);+#10066=EDGE_CURVE('',#10062,#10067,#10069,.T.);+#10067=VERTEX_POINT('',#10068);+#10068=CARTESIAN_POINT('',(-8.,5.22,0.1));+#10069=LINE('',#10063,#1074);+#10070=ORIENTED_EDGE('',*,*,#10071,.T.);+#10071=EDGE_CURVE('',#10067,#10072,#10074,.T.);+#10072=VERTEX_POINT('',#10073);+#10073=CARTESIAN_POINT('',(-7.579347141319,5.22,0.1));+#10074=LINE('',#10068,#277);+#10075=ORIENTED_EDGE('',*,*,#10076,.T.);+#10076=EDGE_CURVE('',#10072,#10077,#10079,.T.);+#10077=VERTEX_POINT('',#10078);+#10078=CARTESIAN_POINT('',(-7.480866366018,5.22,0.182635182233));+#10079=CIRCLE('',#10080,1.E-01);+#10080=AXIS2_PLACEMENT_3D('',#10059,#3937,#3976);+#10081=ORIENTED_EDGE('',*,*,#10082,.T.);+#10082=EDGE_CURVE('',#10077,#10083,#10085,.T.);+#10083=VERTEX_POINT('',#10084);+#10084=CARTESIAN_POINT('',(-7.396961550602,5.22,0.684729635533));+#10085=LINE('',#10078,#3982);+#10086=ORIENTED_EDGE('',*,*,#10087,.T.);+#10087=EDGE_CURVE('',#10083,#4628,#10088,.T.);+#10088=CIRCLE('',#10089,0.2);+#10089=AXIS2_PLACEMENT_3D('',#10047,#1098,#3988);+#10090=PLANE('',#10091);+#10091=AXIS2_PLACEMENT_3D('',#10092,#1098,#13);+#10092=CARTESIAN_POINT('',(-7.414276639233,5.22,0.410238158856));+#10093=ADVANCED_FACE('',(#10094),#10101,.T.);+#10094=FACE_BOUND('',#10095,.F.);+#10095=EDGE_LOOP('',(#10096,#10086,#10099,#10100));+#10096=ORIENTED_EDGE('',*,*,#10097,.T.);+#10097=EDGE_CURVE('',#10027,#10083,#10098,.T.);+#10098=LINE('',#10028,#1097);+#10099=ORIENTED_EDGE('',*,*,#4627,.F.);+#10100=ORIENTED_EDGE('',*,*,#10031,.F.);+#10101=CYLINDRICAL_SURFACE('',#10102,0.2);+#10102=AXIS2_PLACEMENT_3D('',#9991,#3937,#3988);+#10103=ADVANCED_FACE('',(#10104),#10111,.F.);+#10104=FACE_BOUND('',#10105,.F.);+#10105=EDGE_LOOP('',(#10106,#5959,#10109,#10110));+#10106=ORIENTED_EDGE('',*,*,#10107,.T.);+#10107=EDGE_CURVE('',#5883,#5955,#10108,.T.);+#10108=LINE('',#5884,#751);+#10109=ORIENTED_EDGE('',*,*,#5975,.F.);+#10110=ORIENTED_EDGE('',*,*,#5889,.F.);+#10111=PLANE('',#10112);+#10112=AXIS2_PLACEMENT_3D('',#5884,#10113,#5894);+#10113=DIRECTION('',(-0.986322983713,-1.095038486235E-16,-0.16482406317));+#10114=ADVANCED_FACE('',(#10115),#10122,.F.);+#10115=FACE_BOUND('',#10116,.F.);+#10116=EDGE_LOOP('',(#10117,#5953,#10120,#10121));+#10117=ORIENTED_EDGE('',*,*,#10118,.T.);+#10118=EDGE_CURVE('',#5878,#5950,#10119,.T.);+#10119=LINE('',#5879,#751);+#10120=ORIENTED_EDGE('',*,*,#10107,.F.);+#10121=ORIENTED_EDGE('',*,*,#5882,.F.);+#10122=CYLINDRICAL_SURFACE('',#5886,1.E-01);+#10123=ADVANCED_FACE('',(#10124),#10131,.F.);+#10124=FACE_BOUND('',#10125,.F.);+#10125=EDGE_LOOP('',(#10126,#5948,#10129,#10130));+#10126=ORIENTED_EDGE('',*,*,#10127,.T.);+#10127=EDGE_CURVE('',#5873,#5945,#10128,.T.);+#10128=LINE('',#5874,#751);+#10129=ORIENTED_EDGE('',*,*,#10118,.F.);+#10130=ORIENTED_EDGE('',*,*,#5877,.F.);+#10131=PLANE('',#10132);+#10132=AXIS2_PLACEMENT_3D('',#5874,#312,#760);+#10133=ADVANCED_FACE('',(#10134),#10141,.F.);+#10134=FACE_BOUND('',#10135,.F.);+#10135=EDGE_LOOP('',(#10136,#5943,#10139,#10140));+#10136=ORIENTED_EDGE('',*,*,#10137,.T.);+#10137=EDGE_CURVE('',#5868,#5940,#10138,.T.);+#10138=LINE('',#5869,#751);+#10139=ORIENTED_EDGE('',*,*,#10127,.F.);+#10140=ORIENTED_EDGE('',*,*,#5872,.F.);+#10141=PLANE('',#10142);+#10142=AXIS2_PLACEMENT_3D('',#5869,#760,#13);+#10143=ADVANCED_FACE('',(#10144),#10151,.F.);+#10144=FACE_BOUND('',#10145,.F.);+#10145=EDGE_LOOP('',(#10146,#5938,#10149,#10150));+#10146=ORIENTED_EDGE('',*,*,#10147,.T.);+#10147=EDGE_CURVE('',#5860,#5933,#10148,.T.);+#10148=LINE('',#5861,#751);+#10149=ORIENTED_EDGE('',*,*,#10137,.F.);+#10150=ORIENTED_EDGE('',*,*,#5867,.F.);+#10151=PLANE('',#10152);+#10152=AXIS2_PLACEMENT_3D('',#5861,#13,#50);+#10153=ADVANCED_FACE('',(#10154),#10161,.T.);+#10154=FACE_BOUND('',#10155,.F.);+#10155=EDGE_LOOP('',(#10156,#5931,#10159,#10160));+#10156=ORIENTED_EDGE('',*,*,#10157,.T.);+#10157=EDGE_CURVE('',#5853,#5928,#10158,.T.);+#10158=LINE('',#5854,#751);+#10159=ORIENTED_EDGE('',*,*,#10147,.F.);+#10160=ORIENTED_EDGE('',*,*,#5859,.F.);+#10161=CYLINDRICAL_SURFACE('',#10162,0.2);+#10162=AXIS2_PLACEMENT_3D('',#5864,#270,#5865);+#10163=ADVANCED_FACE('',(#10164),#10171,.F.);+#10164=FACE_BOUND('',#10165,.F.);+#10165=EDGE_LOOP('',(#10166,#5926,#10169,#10170));+#10166=ORIENTED_EDGE('',*,*,#10167,.T.);+#10167=EDGE_CURVE('',#5845,#5921,#10168,.T.);+#10168=LINE('',#5846,#751);+#10169=ORIENTED_EDGE('',*,*,#10157,.F.);+#10170=ORIENTED_EDGE('',*,*,#5852,.F.);+#10171=PLANE('',#10172);+#10172=AXIS2_PLACEMENT_3D('',#5846,#10173,#5857);+#10173=DIRECTION('',(0.986322983713,1.095038486235E-16,0.16482406317));+#10174=ADVANCED_FACE('',(#10175),#10182,.F.);+#10175=FACE_BOUND('',#10176,.F.);+#10176=EDGE_LOOP('',(#10177,#5919,#10180,#10181));+#10177=ORIENTED_EDGE('',*,*,#10178,.T.);+#10178=EDGE_CURVE('',#5839,#5915,#10179,.T.);+#10179=LINE('',#5840,#751);+#10180=ORIENTED_EDGE('',*,*,#10167,.F.);+#10181=ORIENTED_EDGE('',*,*,#5844,.F.);+#10182=CYLINDRICAL_SURFACE('',#5848,0.1);+#10183=ADVANCED_FACE('',(#10184),#10189,.F.);+#10184=FACE_BOUND('',#10185,.F.);+#10185=EDGE_LOOP('',(#10186,#10187,#5913,#10188));+#10186=ORIENTED_EDGE('',*,*,#5838,.F.);+#10187=ORIENTED_EDGE('',*,*,#6095,.T.);+#10188=ORIENTED_EDGE('',*,*,#10178,.F.);+#10189=PLANE('',#10190);+#10190=AXIS2_PLACEMENT_3D('',#5842,#13,#50);+#10191=ADVANCED_FACE('',(#10192),#10199,.F.);+#10192=FACE_BOUND('',#10193,.F.);+#10193=EDGE_LOOP('',(#8047,#10194,#10197,#10198));+#10194=ORIENTED_EDGE('',*,*,#10195,.T.);+#10195=EDGE_CURVE('',#8049,#8010,#10196,.T.);+#10196=B_SPLINE_CURVE_WITH_KNOTS('',1,(#8050,#8011),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10197=ORIENTED_EDGE('',*,*,#8029,.F.);+#10198=ORIENTED_EDGE('',*,*,#5992,.F.);+#10199=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#5989,#5994),(#8050,#8011)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#10200=ADVANCED_FACE('',(#10201),#10208,.F.);+#10201=FACE_BOUND('',#10202,.F.);+#10202=EDGE_LOOP('',(#10203,#10204,#6296,#10205));+#10203=ORIENTED_EDGE('',*,*,#6231,.F.);+#10204=ORIENTED_EDGE('',*,*,#6089,.T.);+#10205=ORIENTED_EDGE('',*,*,#10206,.F.);+#10206=EDGE_CURVE('',#6232,#6298,#10207,.T.);+#10207=LINE('',#6233,#751);+#10208=PLANE('',#10209);+#10209=AXIS2_PLACEMENT_3D('',#6235,#13,#50);+#10210=ADVANCED_FACE('',(#10211),#10218,.F.);+#10211=FACE_BOUND('',#10212,.F.);+#10212=EDGE_LOOP('',(#10213,#10214,#6443,#10215));+#10213=ORIENTED_EDGE('',*,*,#6378,.F.);+#10214=ORIENTED_EDGE('',*,*,#6081,.T.);+#10215=ORIENTED_EDGE('',*,*,#10216,.F.);+#10216=EDGE_CURVE('',#6379,#6445,#10217,.T.);+#10217=LINE('',#6380,#751);+#10218=PLANE('',#10219);+#10219=AXIS2_PLACEMENT_3D('',#6382,#13,#50);+#10220=ADVANCED_FACE('',(#10221),#10228,.F.);+#10221=FACE_BOUND('',#10222,.F.);+#10222=EDGE_LOOP('',(#10223,#10224,#6590,#10225));+#10223=ORIENTED_EDGE('',*,*,#6525,.F.);+#10224=ORIENTED_EDGE('',*,*,#6073,.T.);+#10225=ORIENTED_EDGE('',*,*,#10226,.F.);+#10226=EDGE_CURVE('',#6526,#6592,#10227,.T.);+#10227=LINE('',#6527,#751);+#10228=PLANE('',#10229);+#10229=AXIS2_PLACEMENT_3D('',#6529,#13,#50);+#10230=ADVANCED_FACE('',(#10231),#10238,.F.);+#10231=FACE_BOUND('',#10232,.F.);+#10232=EDGE_LOOP('',(#10233,#10234,#6737,#10235));+#10233=ORIENTED_EDGE('',*,*,#6672,.F.);+#10234=ORIENTED_EDGE('',*,*,#6065,.T.);+#10235=ORIENTED_EDGE('',*,*,#10236,.F.);+#10236=EDGE_CURVE('',#6673,#6739,#10237,.T.);+#10237=LINE('',#6674,#751);+#10238=PLANE('',#10239);+#10239=AXIS2_PLACEMENT_3D('',#6676,#13,#50);+#10240=ADVANCED_FACE('',(#10241),#10248,.F.);+#10241=FACE_BOUND('',#10242,.F.);+#10242=EDGE_LOOP('',(#10243,#10244,#6884,#10245));+#10243=ORIENTED_EDGE('',*,*,#6819,.F.);+#10244=ORIENTED_EDGE('',*,*,#6057,.T.);+#10245=ORIENTED_EDGE('',*,*,#10246,.F.);+#10246=EDGE_CURVE('',#6820,#6886,#10247,.T.);+#10247=LINE('',#6821,#751);+#10248=PLANE('',#10249);+#10249=AXIS2_PLACEMENT_3D('',#6823,#13,#50);+#10250=ADVANCED_FACE('',(#10251),#10258,.F.);+#10251=FACE_BOUND('',#10252,.F.);+#10252=EDGE_LOOP('',(#10253,#10254,#7031,#10255));+#10253=ORIENTED_EDGE('',*,*,#6966,.F.);+#10254=ORIENTED_EDGE('',*,*,#6049,.T.);+#10255=ORIENTED_EDGE('',*,*,#10256,.F.);+#10256=EDGE_CURVE('',#6967,#7033,#10257,.T.);+#10257=LINE('',#6968,#751);+#10258=PLANE('',#10259);+#10259=AXIS2_PLACEMENT_3D('',#6970,#13,#50);+#10260=ADVANCED_FACE('',(#10261),#10268,.F.);+#10261=FACE_BOUND('',#10262,.F.);+#10262=EDGE_LOOP('',(#10263,#10264,#7178,#10265));+#10263=ORIENTED_EDGE('',*,*,#7113,.F.);+#10264=ORIENTED_EDGE('',*,*,#6041,.T.);+#10265=ORIENTED_EDGE('',*,*,#10266,.F.);+#10266=EDGE_CURVE('',#7114,#7180,#10267,.T.);+#10267=LINE('',#7115,#751);+#10268=PLANE('',#10269);+#10269=AXIS2_PLACEMENT_3D('',#7117,#13,#50);+#10270=ADVANCED_FACE('',(#10271),#10278,.F.);+#10271=FACE_BOUND('',#10272,.F.);+#10272=EDGE_LOOP('',(#10273,#10274,#7325,#10275));+#10273=ORIENTED_EDGE('',*,*,#7260,.F.);+#10274=ORIENTED_EDGE('',*,*,#6033,.T.);+#10275=ORIENTED_EDGE('',*,*,#10276,.F.);+#10276=EDGE_CURVE('',#7261,#7327,#10277,.T.);+#10277=LINE('',#7262,#751);+#10278=PLANE('',#10279);+#10279=AXIS2_PLACEMENT_3D('',#7264,#13,#50);+#10280=ADVANCED_FACE('',(#10281),#10288,.F.);+#10281=FACE_BOUND('',#10282,.F.);+#10282=EDGE_LOOP('',(#10283,#10284,#7472,#10285));+#10283=ORIENTED_EDGE('',*,*,#7407,.F.);+#10284=ORIENTED_EDGE('',*,*,#6025,.T.);+#10285=ORIENTED_EDGE('',*,*,#10286,.F.);+#10286=EDGE_CURVE('',#7408,#7474,#10287,.T.);+#10287=LINE('',#7409,#751);+#10288=PLANE('',#10289);+#10289=AXIS2_PLACEMENT_3D('',#7411,#13,#50);+#10290=ADVANCED_FACE('',(#10291),#10298,.F.);+#10291=FACE_BOUND('',#10292,.F.);+#10292=EDGE_LOOP('',(#10293,#10294,#7619,#10295));+#10293=ORIENTED_EDGE('',*,*,#7554,.F.);+#10294=ORIENTED_EDGE('',*,*,#6017,.T.);+#10295=ORIENTED_EDGE('',*,*,#10296,.F.);+#10296=EDGE_CURVE('',#7555,#7621,#10297,.T.);+#10297=LINE('',#7556,#751);+#10298=PLANE('',#10299);+#10299=AXIS2_PLACEMENT_3D('',#7558,#13,#50);+#10300=ADVANCED_FACE('',(#10301),#10308,.F.);+#10301=FACE_BOUND('',#10302,.F.);+#10302=EDGE_LOOP('',(#10303,#10304,#7766,#10305));+#10303=ORIENTED_EDGE('',*,*,#7701,.F.);+#10304=ORIENTED_EDGE('',*,*,#6009,.T.);+#10305=ORIENTED_EDGE('',*,*,#10306,.F.);+#10306=EDGE_CURVE('',#7702,#7768,#10307,.T.);+#10307=LINE('',#7703,#751);+#10308=PLANE('',#10309);+#10309=AXIS2_PLACEMENT_3D('',#7705,#13,#50);+#10310=ADVANCED_FACE('',(#10311),#10318,.F.);+#10311=FACE_BOUND('',#10312,.F.);+#10312=EDGE_LOOP('',(#10313,#10314,#7913,#10315));+#10313=ORIENTED_EDGE('',*,*,#7848,.F.);+#10314=ORIENTED_EDGE('',*,*,#6001,.T.);+#10315=ORIENTED_EDGE('',*,*,#10316,.F.);+#10316=EDGE_CURVE('',#7849,#7915,#10317,.T.);+#10317=LINE('',#7850,#751);+#10318=PLANE('',#10319);+#10319=AXIS2_PLACEMENT_3D('',#7852,#13,#50);+#10320=ADVANCED_FACE('',(#10321),#283,.F.);+#10321=FACE_BOUND('',#10322,.F.);+#10322=EDGE_LOOP('',(#10323,#10327,#10331,#10332));+#10323=ORIENTED_EDGE('',*,*,#10324,.T.);+#10324=EDGE_CURVE('',#7996,#10325,#3777,.T.);+#10325=VERTEX_POINT('',#10326);+#10326=CARTESIAN_POINT('',(5.22,-7.,0.85));+#10327=ORIENTED_EDGE('',*,*,#10328,.T.);+#10328=EDGE_CURVE('',#10325,#6123,#10329,.T.);+#10329=LINE('',#10330,#3784);+#10330=CARTESIAN_POINT('',(5.22,-7.2,0.85));+#10331=ORIENTED_EDGE('',*,*,#6122,.F.);+#10332=ORIENTED_EDGE('',*,*,#8000,.F.);+#10333=ADVANCED_FACE('',(#10334),#10353,.F.);+#10334=FACE_BOUND('',#10335,.F.);+#10335=EDGE_LOOP('',(#10336,#10339,#10344,#10349,#10351,#10352));+#10336=ORIENTED_EDGE('',*,*,#10337,.F.);+#10337=EDGE_CURVE('',#10338,#10325,#10329,.T.);+#10338=VERTEX_POINT('',#10330);+#10339=ORIENTED_EDGE('',*,*,#10340,.T.);+#10340=EDGE_CURVE('',#10338,#10341,#10343,.T.);+#10341=VERTEX_POINT('',#10342);+#10342=CARTESIAN_POINT('',(4.78,-7.2,0.85));+#10343=LINE('',#10330,#7992);+#10344=ORIENTED_EDGE('',*,*,#10345,.T.);+#10345=EDGE_CURVE('',#10341,#10346,#10348,.T.);+#10346=VERTEX_POINT('',#10347);+#10347=CARTESIAN_POINT('',(4.78,-7.,0.85));+#10348=LINE('',#10342,#3784);+#10349=ORIENTED_EDGE('',*,*,#10350,.T.);+#10350=EDGE_CURVE('',#10346,#6127,#10348,.T.);+#10351=ORIENTED_EDGE('',*,*,#6126,.F.);+#10352=ORIENTED_EDGE('',*,*,#10328,.F.);+#10353=PLANE('',#10354);+#10354=AXIS2_PLACEMENT_3D('',#10330,#312,#3785);+#10355=ADVANCED_FACE('',(#10356),#283,.F.);+#10356=FACE_BOUND('',#10357,.F.);+#10357=EDGE_LOOP('',(#10358,#10362,#10366,#10367));+#10358=ORIENTED_EDGE('',*,*,#10359,.T.);+#10359=EDGE_CURVE('',#10346,#10360,#3777,.T.);+#10360=VERTEX_POINT('',#10361);+#10361=CARTESIAN_POINT('',(4.22,-7.,0.85));+#10362=ORIENTED_EDGE('',*,*,#10363,.T.);+#10363=EDGE_CURVE('',#10360,#6131,#10364,.T.);+#10364=LINE('',#10365,#3784);+#10365=CARTESIAN_POINT('',(4.22,-7.2,0.85));+#10366=ORIENTED_EDGE('',*,*,#6130,.F.);+#10367=ORIENTED_EDGE('',*,*,#10350,.F.);+#10368=ADVANCED_FACE('',(#10369),#10388,.F.);+#10369=FACE_BOUND('',#10370,.F.);+#10370=EDGE_LOOP('',(#10371,#10374,#10379,#10384,#10386,#10387));+#10371=ORIENTED_EDGE('',*,*,#10372,.F.);+#10372=EDGE_CURVE('',#10373,#10360,#10364,.T.);+#10373=VERTEX_POINT('',#10365);+#10374=ORIENTED_EDGE('',*,*,#10375,.T.);+#10375=EDGE_CURVE('',#10373,#10376,#10378,.T.);+#10376=VERTEX_POINT('',#10377);+#10377=CARTESIAN_POINT('',(3.78,-7.2,0.85));+#10378=LINE('',#10365,#7992);+#10379=ORIENTED_EDGE('',*,*,#10380,.T.);+#10380=EDGE_CURVE('',#10376,#10381,#10383,.T.);+#10381=VERTEX_POINT('',#10382);+#10382=CARTESIAN_POINT('',(3.78,-7.,0.85));+#10383=LINE('',#10377,#3784);+#10384=ORIENTED_EDGE('',*,*,#10385,.T.);+#10385=EDGE_CURVE('',#10381,#6135,#10383,.T.);+#10386=ORIENTED_EDGE('',*,*,#6134,.F.);+#10387=ORIENTED_EDGE('',*,*,#10363,.F.);+#10388=PLANE('',#10389);+#10389=AXIS2_PLACEMENT_3D('',#10365,#312,#3785);+#10390=ADVANCED_FACE('',(#10391),#283,.F.);+#10391=FACE_BOUND('',#10392,.F.);+#10392=EDGE_LOOP('',(#10393,#10397,#10401,#10402));+#10393=ORIENTED_EDGE('',*,*,#10394,.T.);+#10394=EDGE_CURVE('',#10381,#10395,#3777,.T.);+#10395=VERTEX_POINT('',#10396);+#10396=CARTESIAN_POINT('',(3.22,-7.,0.85));+#10397=ORIENTED_EDGE('',*,*,#10398,.T.);+#10398=EDGE_CURVE('',#10395,#6139,#10399,.T.);+#10399=LINE('',#10400,#3784);+#10400=CARTESIAN_POINT('',(3.22,-7.2,0.85));+#10401=ORIENTED_EDGE('',*,*,#6138,.F.);+#10402=ORIENTED_EDGE('',*,*,#10385,.F.);+#10403=ADVANCED_FACE('',(#10404),#10423,.F.);+#10404=FACE_BOUND('',#10405,.F.);+#10405=EDGE_LOOP('',(#10406,#10409,#10414,#10419,#10421,#10422));+#10406=ORIENTED_EDGE('',*,*,#10407,.F.);+#10407=EDGE_CURVE('',#10408,#10395,#10399,.T.);+#10408=VERTEX_POINT('',#10400);+#10409=ORIENTED_EDGE('',*,*,#10410,.T.);+#10410=EDGE_CURVE('',#10408,#10411,#10413,.T.);+#10411=VERTEX_POINT('',#10412);+#10412=CARTESIAN_POINT('',(2.78,-7.2,0.85));+#10413=LINE('',#10400,#7992);+#10414=ORIENTED_EDGE('',*,*,#10415,.T.);+#10415=EDGE_CURVE('',#10411,#10416,#10418,.T.);+#10416=VERTEX_POINT('',#10417);+#10417=CARTESIAN_POINT('',(2.78,-7.,0.85));+#10418=LINE('',#10412,#3784);+#10419=ORIENTED_EDGE('',*,*,#10420,.T.);+#10420=EDGE_CURVE('',#10416,#6143,#10418,.T.);+#10421=ORIENTED_EDGE('',*,*,#6142,.F.);+#10422=ORIENTED_EDGE('',*,*,#10398,.F.);+#10423=PLANE('',#10424);+#10424=AXIS2_PLACEMENT_3D('',#10400,#312,#3785);+#10425=ADVANCED_FACE('',(#10426),#283,.F.);+#10426=FACE_BOUND('',#10427,.F.);+#10427=EDGE_LOOP('',(#10428,#10432,#10436,#10437));+#10428=ORIENTED_EDGE('',*,*,#10429,.T.);+#10429=EDGE_CURVE('',#10416,#10430,#3777,.T.);+#10430=VERTEX_POINT('',#10431);+#10431=CARTESIAN_POINT('',(2.22,-7.,0.85));+#10432=ORIENTED_EDGE('',*,*,#10433,.T.);+#10433=EDGE_CURVE('',#10430,#6147,#10434,.T.);+#10434=LINE('',#10435,#3784);+#10435=CARTESIAN_POINT('',(2.22,-7.2,0.85));+#10436=ORIENTED_EDGE('',*,*,#6146,.F.);+#10437=ORIENTED_EDGE('',*,*,#10420,.F.);+#10438=ADVANCED_FACE('',(#10439),#10458,.F.);+#10439=FACE_BOUND('',#10440,.F.);+#10440=EDGE_LOOP('',(#10441,#10444,#10449,#10454,#10456,#10457));+#10441=ORIENTED_EDGE('',*,*,#10442,.F.);+#10442=EDGE_CURVE('',#10443,#10430,#10434,.T.);+#10443=VERTEX_POINT('',#10435);+#10444=ORIENTED_EDGE('',*,*,#10445,.T.);+#10445=EDGE_CURVE('',#10443,#10446,#10448,.T.);+#10446=VERTEX_POINT('',#10447);+#10447=CARTESIAN_POINT('',(1.78,-7.2,0.85));+#10448=LINE('',#10435,#7992);+#10449=ORIENTED_EDGE('',*,*,#10450,.T.);+#10450=EDGE_CURVE('',#10446,#10451,#10453,.T.);+#10451=VERTEX_POINT('',#10452);+#10452=CARTESIAN_POINT('',(1.78,-7.,0.85));+#10453=LINE('',#10447,#3784);+#10454=ORIENTED_EDGE('',*,*,#10455,.T.);+#10455=EDGE_CURVE('',#10451,#6151,#10453,.T.);+#10456=ORIENTED_EDGE('',*,*,#6150,.F.);+#10457=ORIENTED_EDGE('',*,*,#10433,.F.);+#10458=PLANE('',#10459);+#10459=AXIS2_PLACEMENT_3D('',#10435,#312,#3785);+#10460=ADVANCED_FACE('',(#10461),#283,.F.);+#10461=FACE_BOUND('',#10462,.F.);+#10462=EDGE_LOOP('',(#10463,#10467,#10471,#10472));+#10463=ORIENTED_EDGE('',*,*,#10464,.T.);+#10464=EDGE_CURVE('',#10451,#10465,#3777,.T.);+#10465=VERTEX_POINT('',#10466);+#10466=CARTESIAN_POINT('',(1.22,-7.,0.85));+#10467=ORIENTED_EDGE('',*,*,#10468,.T.);+#10468=EDGE_CURVE('',#10465,#6155,#10469,.T.);+#10469=LINE('',#10470,#3784);+#10470=CARTESIAN_POINT('',(1.22,-7.2,0.85));+#10471=ORIENTED_EDGE('',*,*,#6154,.F.);+#10472=ORIENTED_EDGE('',*,*,#10455,.F.);+#10473=ADVANCED_FACE('',(#10474),#10493,.F.);+#10474=FACE_BOUND('',#10475,.F.);+#10475=EDGE_LOOP('',(#10476,#10479,#10484,#10489,#10491,#10492));+#10476=ORIENTED_EDGE('',*,*,#10477,.F.);+#10477=EDGE_CURVE('',#10478,#10465,#10469,.T.);+#10478=VERTEX_POINT('',#10470);+#10479=ORIENTED_EDGE('',*,*,#10480,.T.);+#10480=EDGE_CURVE('',#10478,#10481,#10483,.T.);+#10481=VERTEX_POINT('',#10482);+#10482=CARTESIAN_POINT('',(0.78,-7.2,0.85));+#10483=LINE('',#10470,#7992);+#10484=ORIENTED_EDGE('',*,*,#10485,.T.);+#10485=EDGE_CURVE('',#10481,#10486,#10488,.T.);+#10486=VERTEX_POINT('',#10487);+#10487=CARTESIAN_POINT('',(0.78,-7.,0.85));+#10488=LINE('',#10482,#3784);+#10489=ORIENTED_EDGE('',*,*,#10490,.T.);+#10490=EDGE_CURVE('',#10486,#6159,#10488,.T.);+#10491=ORIENTED_EDGE('',*,*,#6158,.F.);+#10492=ORIENTED_EDGE('',*,*,#10468,.F.);+#10493=PLANE('',#10494);+#10494=AXIS2_PLACEMENT_3D('',#10470,#312,#3785);+#10495=ADVANCED_FACE('',(#10496),#283,.F.);+#10496=FACE_BOUND('',#10497,.F.);+#10497=EDGE_LOOP('',(#10498,#10502,#10506,#10507));+#10498=ORIENTED_EDGE('',*,*,#10499,.T.);+#10499=EDGE_CURVE('',#10486,#10500,#3777,.T.);+#10500=VERTEX_POINT('',#10501);+#10501=CARTESIAN_POINT('',(0.22,-7.,0.85));+#10502=ORIENTED_EDGE('',*,*,#10503,.T.);+#10503=EDGE_CURVE('',#10500,#6163,#10504,.T.);+#10504=LINE('',#10505,#3784);+#10505=CARTESIAN_POINT('',(0.22,-7.2,0.85));+#10506=ORIENTED_EDGE('',*,*,#6162,.F.);+#10507=ORIENTED_EDGE('',*,*,#10490,.F.);+#10508=ADVANCED_FACE('',(#10509),#10528,.F.);+#10509=FACE_BOUND('',#10510,.F.);+#10510=EDGE_LOOP('',(#10511,#10514,#10519,#10524,#10526,#10527));+#10511=ORIENTED_EDGE('',*,*,#10512,.F.);+#10512=EDGE_CURVE('',#10513,#10500,#10504,.T.);+#10513=VERTEX_POINT('',#10505);+#10514=ORIENTED_EDGE('',*,*,#10515,.T.);+#10515=EDGE_CURVE('',#10513,#10516,#10518,.T.);+#10516=VERTEX_POINT('',#10517);+#10517=CARTESIAN_POINT('',(-0.22,-7.2,0.85));+#10518=LINE('',#10505,#7992);+#10519=ORIENTED_EDGE('',*,*,#10520,.T.);+#10520=EDGE_CURVE('',#10516,#10521,#10523,.T.);+#10521=VERTEX_POINT('',#10522);+#10522=CARTESIAN_POINT('',(-0.22,-7.,0.85));+#10523=LINE('',#10517,#3784);+#10524=ORIENTED_EDGE('',*,*,#10525,.T.);+#10525=EDGE_CURVE('',#10521,#6167,#10523,.T.);+#10526=ORIENTED_EDGE('',*,*,#6166,.F.);+#10527=ORIENTED_EDGE('',*,*,#10503,.F.);+#10528=PLANE('',#10529);+#10529=AXIS2_PLACEMENT_3D('',#10505,#312,#3785);+#10530=ADVANCED_FACE('',(#10531),#283,.F.);+#10531=FACE_BOUND('',#10532,.F.);+#10532=EDGE_LOOP('',(#10533,#10537,#10541,#10542));+#10533=ORIENTED_EDGE('',*,*,#10534,.T.);+#10534=EDGE_CURVE('',#10521,#10535,#3777,.T.);+#10535=VERTEX_POINT('',#10536);+#10536=CARTESIAN_POINT('',(-0.78,-7.,0.85));+#10537=ORIENTED_EDGE('',*,*,#10538,.T.);+#10538=EDGE_CURVE('',#10535,#6171,#10539,.T.);+#10539=LINE('',#10540,#3784);+#10540=CARTESIAN_POINT('',(-0.78,-7.2,0.85));+#10541=ORIENTED_EDGE('',*,*,#6170,.F.);+#10542=ORIENTED_EDGE('',*,*,#10525,.F.);+#10543=ADVANCED_FACE('',(#10544),#10563,.F.);+#10544=FACE_BOUND('',#10545,.F.);+#10545=EDGE_LOOP('',(#10546,#10549,#10554,#10559,#10561,#10562));+#10546=ORIENTED_EDGE('',*,*,#10547,.F.);+#10547=EDGE_CURVE('',#10548,#10535,#10539,.T.);+#10548=VERTEX_POINT('',#10540);+#10549=ORIENTED_EDGE('',*,*,#10550,.T.);+#10550=EDGE_CURVE('',#10548,#10551,#10553,.T.);+#10551=VERTEX_POINT('',#10552);+#10552=CARTESIAN_POINT('',(-1.22,-7.2,0.85));+#10553=LINE('',#10540,#7992);+#10554=ORIENTED_EDGE('',*,*,#10555,.T.);+#10555=EDGE_CURVE('',#10551,#10556,#10558,.T.);+#10556=VERTEX_POINT('',#10557);+#10557=CARTESIAN_POINT('',(-1.22,-7.,0.85));+#10558=LINE('',#10552,#3784);+#10559=ORIENTED_EDGE('',*,*,#10560,.T.);+#10560=EDGE_CURVE('',#10556,#6175,#10558,.T.);+#10561=ORIENTED_EDGE('',*,*,#6174,.F.);+#10562=ORIENTED_EDGE('',*,*,#10538,.F.);+#10563=PLANE('',#10564);+#10564=AXIS2_PLACEMENT_3D('',#10540,#312,#3785);+#10565=ADVANCED_FACE('',(#10566),#283,.F.);+#10566=FACE_BOUND('',#10567,.F.);+#10567=EDGE_LOOP('',(#10568,#10572,#10576,#10577));+#10568=ORIENTED_EDGE('',*,*,#10569,.T.);+#10569=EDGE_CURVE('',#10556,#10570,#3777,.T.);+#10570=VERTEX_POINT('',#10571);+#10571=CARTESIAN_POINT('',(-1.78,-7.,0.85));+#10572=ORIENTED_EDGE('',*,*,#10573,.T.);+#10573=EDGE_CURVE('',#10570,#6179,#10574,.T.);+#10574=LINE('',#10575,#3784);+#10575=CARTESIAN_POINT('',(-1.78,-7.2,0.85));+#10576=ORIENTED_EDGE('',*,*,#6178,.F.);+#10577=ORIENTED_EDGE('',*,*,#10560,.F.);+#10578=ADVANCED_FACE('',(#10579),#10598,.F.);+#10579=FACE_BOUND('',#10580,.F.);+#10580=EDGE_LOOP('',(#10581,#10584,#10589,#10594,#10596,#10597));+#10581=ORIENTED_EDGE('',*,*,#10582,.F.);+#10582=EDGE_CURVE('',#10583,#10570,#10574,.T.);+#10583=VERTEX_POINT('',#10575);+#10584=ORIENTED_EDGE('',*,*,#10585,.T.);+#10585=EDGE_CURVE('',#10583,#10586,#10588,.T.);+#10586=VERTEX_POINT('',#10587);+#10587=CARTESIAN_POINT('',(-2.22,-7.2,0.85));+#10588=LINE('',#10575,#7992);+#10589=ORIENTED_EDGE('',*,*,#10590,.T.);+#10590=EDGE_CURVE('',#10586,#10591,#10593,.T.);+#10591=VERTEX_POINT('',#10592);+#10592=CARTESIAN_POINT('',(-2.22,-7.,0.85));+#10593=LINE('',#10587,#3784);+#10594=ORIENTED_EDGE('',*,*,#10595,.T.);+#10595=EDGE_CURVE('',#10591,#6183,#10593,.T.);+#10596=ORIENTED_EDGE('',*,*,#6182,.F.);+#10597=ORIENTED_EDGE('',*,*,#10573,.F.);+#10598=PLANE('',#10599);+#10599=AXIS2_PLACEMENT_3D('',#10575,#312,#3785);+#10600=ADVANCED_FACE('',(#10601),#283,.F.);+#10601=FACE_BOUND('',#10602,.F.);+#10602=EDGE_LOOP('',(#10603,#10607,#10611,#10612));+#10603=ORIENTED_EDGE('',*,*,#10604,.T.);+#10604=EDGE_CURVE('',#10591,#10605,#3777,.T.);+#10605=VERTEX_POINT('',#10606);+#10606=CARTESIAN_POINT('',(-2.78,-7.,0.85));+#10607=ORIENTED_EDGE('',*,*,#10608,.T.);+#10608=EDGE_CURVE('',#10605,#6187,#10609,.T.);+#10609=LINE('',#10610,#3784);+#10610=CARTESIAN_POINT('',(-2.78,-7.2,0.85));+#10611=ORIENTED_EDGE('',*,*,#6186,.F.);+#10612=ORIENTED_EDGE('',*,*,#10595,.F.);+#10613=ADVANCED_FACE('',(#10614),#10633,.F.);+#10614=FACE_BOUND('',#10615,.F.);+#10615=EDGE_LOOP('',(#10616,#10619,#10624,#10629,#10631,#10632));+#10616=ORIENTED_EDGE('',*,*,#10617,.F.);+#10617=EDGE_CURVE('',#10618,#10605,#10609,.T.);+#10618=VERTEX_POINT('',#10610);+#10619=ORIENTED_EDGE('',*,*,#10620,.T.);+#10620=EDGE_CURVE('',#10618,#10621,#10623,.T.);+#10621=VERTEX_POINT('',#10622);+#10622=CARTESIAN_POINT('',(-3.22,-7.2,0.85));+#10623=LINE('',#10610,#7992);+#10624=ORIENTED_EDGE('',*,*,#10625,.T.);+#10625=EDGE_CURVE('',#10621,#10626,#10628,.T.);+#10626=VERTEX_POINT('',#10627);+#10627=CARTESIAN_POINT('',(-3.22,-7.,0.85));+#10628=LINE('',#10622,#3784);+#10629=ORIENTED_EDGE('',*,*,#10630,.T.);+#10630=EDGE_CURVE('',#10626,#6191,#10628,.T.);+#10631=ORIENTED_EDGE('',*,*,#6190,.F.);+#10632=ORIENTED_EDGE('',*,*,#10608,.F.);+#10633=PLANE('',#10634);+#10634=AXIS2_PLACEMENT_3D('',#10610,#312,#3785);+#10635=ADVANCED_FACE('',(#10636),#283,.F.);+#10636=FACE_BOUND('',#10637,.F.);+#10637=EDGE_LOOP('',(#10638,#10642,#10646,#10647));+#10638=ORIENTED_EDGE('',*,*,#10639,.T.);+#10639=EDGE_CURVE('',#10626,#10640,#3777,.T.);+#10640=VERTEX_POINT('',#10641);+#10641=CARTESIAN_POINT('',(-3.78,-7.,0.85));+#10642=ORIENTED_EDGE('',*,*,#10643,.T.);+#10643=EDGE_CURVE('',#10640,#6195,#10644,.T.);+#10644=LINE('',#10645,#3784);+#10645=CARTESIAN_POINT('',(-3.78,-7.2,0.85));+#10646=ORIENTED_EDGE('',*,*,#6194,.F.);+#10647=ORIENTED_EDGE('',*,*,#10630,.F.);+#10648=ADVANCED_FACE('',(#10649),#10668,.F.);+#10649=FACE_BOUND('',#10650,.F.);+#10650=EDGE_LOOP('',(#10651,#10654,#10659,#10664,#10666,#10667));+#10651=ORIENTED_EDGE('',*,*,#10652,.F.);+#10652=EDGE_CURVE('',#10653,#10640,#10644,.T.);+#10653=VERTEX_POINT('',#10645);+#10654=ORIENTED_EDGE('',*,*,#10655,.T.);+#10655=EDGE_CURVE('',#10653,#10656,#10658,.T.);+#10656=VERTEX_POINT('',#10657);+#10657=CARTESIAN_POINT('',(-4.22,-7.2,0.85));+#10658=LINE('',#10645,#7992);+#10659=ORIENTED_EDGE('',*,*,#10660,.T.);+#10660=EDGE_CURVE('',#10656,#10661,#10663,.T.);+#10661=VERTEX_POINT('',#10662);+#10662=CARTESIAN_POINT('',(-4.22,-7.,0.85));+#10663=LINE('',#10657,#3784);+#10664=ORIENTED_EDGE('',*,*,#10665,.T.);+#10665=EDGE_CURVE('',#10661,#6199,#10663,.T.);+#10666=ORIENTED_EDGE('',*,*,#6198,.F.);+#10667=ORIENTED_EDGE('',*,*,#10643,.F.);+#10668=PLANE('',#10669);+#10669=AXIS2_PLACEMENT_3D('',#10645,#312,#3785);+#10670=ADVANCED_FACE('',(#10671),#283,.F.);+#10671=FACE_BOUND('',#10672,.F.);+#10672=EDGE_LOOP('',(#10673,#10677,#10681,#10682));+#10673=ORIENTED_EDGE('',*,*,#10674,.T.);+#10674=EDGE_CURVE('',#10661,#10675,#3777,.T.);+#10675=VERTEX_POINT('',#10676);+#10676=CARTESIAN_POINT('',(-4.78,-7.,0.85));+#10677=ORIENTED_EDGE('',*,*,#10678,.T.);+#10678=EDGE_CURVE('',#10675,#6203,#10679,.T.);+#10679=LINE('',#10680,#3784);+#10680=CARTESIAN_POINT('',(-4.78,-7.2,0.85));+#10681=ORIENTED_EDGE('',*,*,#6202,.F.);+#10682=ORIENTED_EDGE('',*,*,#10665,.F.);+#10683=ADVANCED_FACE('',(#10684),#10703,.F.);+#10684=FACE_BOUND('',#10685,.F.);+#10685=EDGE_LOOP('',(#10686,#10689,#10694,#10699,#10701,#10702));+#10686=ORIENTED_EDGE('',*,*,#10687,.F.);+#10687=EDGE_CURVE('',#10688,#10675,#10679,.T.);+#10688=VERTEX_POINT('',#10680);+#10689=ORIENTED_EDGE('',*,*,#10690,.T.);+#10690=EDGE_CURVE('',#10688,#10691,#10693,.T.);+#10691=VERTEX_POINT('',#10692);+#10692=CARTESIAN_POINT('',(-5.22,-7.2,0.85));+#10693=LINE('',#10680,#7992);+#10694=ORIENTED_EDGE('',*,*,#10695,.T.);+#10695=EDGE_CURVE('',#10691,#10696,#10698,.T.);+#10696=VERTEX_POINT('',#10697);+#10697=CARTESIAN_POINT('',(-5.22,-7.,0.85));+#10698=LINE('',#10692,#3784);+#10699=ORIENTED_EDGE('',*,*,#10700,.T.);+#10700=EDGE_CURVE('',#10696,#6207,#10698,.T.);+#10701=ORIENTED_EDGE('',*,*,#6206,.F.);+#10702=ORIENTED_EDGE('',*,*,#10678,.F.);+#10703=PLANE('',#10704);+#10704=AXIS2_PLACEMENT_3D('',#10680,#312,#3785);+#10705=ADVANCED_FACE('',(#10706),#283,.F.);+#10706=FACE_BOUND('',#10707,.F.);+#10707=EDGE_LOOP('',(#10708,#10710,#10711,#10712));+#10708=ORIENTED_EDGE('',*,*,#10709,.T.);+#10709=EDGE_CURVE('',#10696,#8612,#3777,.T.);+#10710=ORIENTED_EDGE('',*,*,#8624,.T.);+#10711=ORIENTED_EDGE('',*,*,#6210,.F.);+#10712=ORIENTED_EDGE('',*,*,#10700,.F.);+#10713=ADVANCED_FACE('',(#10714),#10721,.F.);+#10714=FACE_BOUND('',#10715,.F.);+#10715=EDGE_LOOP('',(#10716,#6342,#10719,#10720));+#10716=ORIENTED_EDGE('',*,*,#10717,.T.);+#10717=EDGE_CURVE('',#6272,#6338,#10718,.T.);+#10718=LINE('',#6273,#751);+#10719=ORIENTED_EDGE('',*,*,#6358,.F.);+#10720=ORIENTED_EDGE('',*,*,#6277,.F.);+#10721=PLANE('',#10722);+#10722=AXIS2_PLACEMENT_3D('',#6273,#10113,#5894);+#10723=ADVANCED_FACE('',(#10724),#10731,.F.);+#10724=FACE_BOUND('',#10725,.F.);+#10725=EDGE_LOOP('',(#10726,#6336,#10729,#10730));+#10726=ORIENTED_EDGE('',*,*,#10727,.T.);+#10727=EDGE_CURVE('',#6267,#6333,#10728,.T.);+#10728=LINE('',#6268,#751);+#10729=ORIENTED_EDGE('',*,*,#10717,.F.);+#10730=ORIENTED_EDGE('',*,*,#6271,.F.);+#10731=CYLINDRICAL_SURFACE('',#6275,1.E-01);+#10732=ADVANCED_FACE('',(#10733),#10740,.F.);+#10733=FACE_BOUND('',#10734,.F.);+#10734=EDGE_LOOP('',(#10735,#6331,#10738,#10739));+#10735=ORIENTED_EDGE('',*,*,#10736,.T.);+#10736=EDGE_CURVE('',#6262,#6328,#10737,.T.);+#10737=LINE('',#6263,#751);+#10738=ORIENTED_EDGE('',*,*,#10727,.F.);+#10739=ORIENTED_EDGE('',*,*,#6266,.F.);+#10740=PLANE('',#10741);+#10741=AXIS2_PLACEMENT_3D('',#6263,#312,#760);+#10742=ADVANCED_FACE('',(#10743),#10750,.F.);+#10743=FACE_BOUND('',#10744,.F.);+#10744=EDGE_LOOP('',(#10745,#6326,#10748,#10749));+#10745=ORIENTED_EDGE('',*,*,#10746,.T.);+#10746=EDGE_CURVE('',#6257,#6323,#10747,.T.);+#10747=LINE('',#6258,#751);+#10748=ORIENTED_EDGE('',*,*,#10736,.F.);+#10749=ORIENTED_EDGE('',*,*,#6261,.F.);+#10750=PLANE('',#10751);+#10751=AXIS2_PLACEMENT_3D('',#6258,#760,#13);+#10752=ADVANCED_FACE('',(#10753),#10760,.F.);+#10753=FACE_BOUND('',#10754,.F.);+#10754=EDGE_LOOP('',(#10755,#6321,#10758,#10759));+#10755=ORIENTED_EDGE('',*,*,#10756,.T.);+#10756=EDGE_CURVE('',#6250,#6316,#10757,.T.);+#10757=LINE('',#6251,#751);+#10758=ORIENTED_EDGE('',*,*,#10746,.F.);+#10759=ORIENTED_EDGE('',*,*,#6256,.F.);+#10760=PLANE('',#10761);+#10761=AXIS2_PLACEMENT_3D('',#6251,#13,#50);+#10762=ADVANCED_FACE('',(#10763),#10770,.T.);+#10763=FACE_BOUND('',#10764,.F.);+#10764=EDGE_LOOP('',(#10765,#6314,#10768,#10769));+#10765=ORIENTED_EDGE('',*,*,#10766,.T.);+#10766=EDGE_CURVE('',#6245,#6311,#10767,.T.);+#10767=LINE('',#6246,#751);+#10768=ORIENTED_EDGE('',*,*,#10756,.F.);+#10769=ORIENTED_EDGE('',*,*,#6249,.F.);+#10770=CYLINDRICAL_SURFACE('',#10771,0.2);+#10771=AXIS2_PLACEMENT_3D('',#6254,#270,#5865);+#10772=ADVANCED_FACE('',(#10773),#10780,.F.);+#10773=FACE_BOUND('',#10774,.F.);+#10774=EDGE_LOOP('',(#10775,#6309,#10778,#10779));+#10775=ORIENTED_EDGE('',*,*,#10776,.T.);+#10776=EDGE_CURVE('',#6238,#6304,#10777,.T.);+#10777=LINE('',#6239,#751);+#10778=ORIENTED_EDGE('',*,*,#10766,.F.);+#10779=ORIENTED_EDGE('',*,*,#6244,.F.);+#10780=PLANE('',#10781);+#10781=AXIS2_PLACEMENT_3D('',#6239,#10173,#5857);+#10782=ADVANCED_FACE('',(#10783),#10788,.F.);+#10783=FACE_BOUND('',#10784,.F.);+#10784=EDGE_LOOP('',(#10785,#6302,#10786,#10787));+#10785=ORIENTED_EDGE('',*,*,#10206,.T.);+#10786=ORIENTED_EDGE('',*,*,#10776,.F.);+#10787=ORIENTED_EDGE('',*,*,#6237,.F.);+#10788=CYLINDRICAL_SURFACE('',#6241,0.1);+#10789=ADVANCED_FACE('',(#10790),#10797,.F.);+#10790=FACE_BOUND('',#10791,.F.);+#10791=EDGE_LOOP('',(#10792,#6489,#10795,#10796));+#10792=ORIENTED_EDGE('',*,*,#10793,.T.);+#10793=EDGE_CURVE('',#6419,#6485,#10794,.T.);+#10794=LINE('',#6420,#751);+#10795=ORIENTED_EDGE('',*,*,#6505,.F.);+#10796=ORIENTED_EDGE('',*,*,#6424,.F.);+#10797=PLANE('',#10798);+#10798=AXIS2_PLACEMENT_3D('',#6420,#10113,#5894);+#10799=ADVANCED_FACE('',(#10800),#10807,.F.);+#10800=FACE_BOUND('',#10801,.F.);+#10801=EDGE_LOOP('',(#10802,#6483,#10805,#10806));+#10802=ORIENTED_EDGE('',*,*,#10803,.T.);+#10803=EDGE_CURVE('',#6414,#6480,#10804,.T.);+#10804=LINE('',#6415,#751);+#10805=ORIENTED_EDGE('',*,*,#10793,.F.);+#10806=ORIENTED_EDGE('',*,*,#6418,.F.);+#10807=CYLINDRICAL_SURFACE('',#6422,1.E-01);+#10808=ADVANCED_FACE('',(#10809),#10816,.F.);+#10809=FACE_BOUND('',#10810,.F.);+#10810=EDGE_LOOP('',(#10811,#6478,#10814,#10815));+#10811=ORIENTED_EDGE('',*,*,#10812,.T.);+#10812=EDGE_CURVE('',#6409,#6475,#10813,.T.);+#10813=LINE('',#6410,#751);+#10814=ORIENTED_EDGE('',*,*,#10803,.F.);+#10815=ORIENTED_EDGE('',*,*,#6413,.F.);+#10816=PLANE('',#10817);+#10817=AXIS2_PLACEMENT_3D('',#6410,#312,#760);+#10818=ADVANCED_FACE('',(#10819),#10826,.F.);+#10819=FACE_BOUND('',#10820,.F.);+#10820=EDGE_LOOP('',(#10821,#6473,#10824,#10825));+#10821=ORIENTED_EDGE('',*,*,#10822,.T.);+#10822=EDGE_CURVE('',#6404,#6470,#10823,.T.);+#10823=LINE('',#6405,#751);+#10824=ORIENTED_EDGE('',*,*,#10812,.F.);+#10825=ORIENTED_EDGE('',*,*,#6408,.F.);+#10826=PLANE('',#10827);+#10827=AXIS2_PLACEMENT_3D('',#6405,#760,#13);+#10828=ADVANCED_FACE('',(#10829),#10836,.F.);+#10829=FACE_BOUND('',#10830,.F.);+#10830=EDGE_LOOP('',(#10831,#6468,#10834,#10835));+#10831=ORIENTED_EDGE('',*,*,#10832,.T.);+#10832=EDGE_CURVE('',#6397,#6463,#10833,.T.);+#10833=LINE('',#6398,#751);+#10834=ORIENTED_EDGE('',*,*,#10822,.F.);+#10835=ORIENTED_EDGE('',*,*,#6403,.F.);+#10836=PLANE('',#10837);+#10837=AXIS2_PLACEMENT_3D('',#6398,#13,#50);+#10838=ADVANCED_FACE('',(#10839),#10846,.T.);+#10839=FACE_BOUND('',#10840,.F.);+#10840=EDGE_LOOP('',(#10841,#6461,#10844,#10845));+#10841=ORIENTED_EDGE('',*,*,#10842,.T.);+#10842=EDGE_CURVE('',#6392,#6458,#10843,.T.);+#10843=LINE('',#6393,#751);+#10844=ORIENTED_EDGE('',*,*,#10832,.F.);+#10845=ORIENTED_EDGE('',*,*,#6396,.F.);+#10846=CYLINDRICAL_SURFACE('',#10847,0.2);+#10847=AXIS2_PLACEMENT_3D('',#6401,#270,#5865);+#10848=ADVANCED_FACE('',(#10849),#10856,.F.);+#10849=FACE_BOUND('',#10850,.F.);+#10850=EDGE_LOOP('',(#10851,#6456,#10854,#10855));+#10851=ORIENTED_EDGE('',*,*,#10852,.T.);+#10852=EDGE_CURVE('',#6385,#6451,#10853,.T.);+#10853=LINE('',#6386,#751);+#10854=ORIENTED_EDGE('',*,*,#10842,.F.);+#10855=ORIENTED_EDGE('',*,*,#6391,.F.);+#10856=PLANE('',#10857);+#10857=AXIS2_PLACEMENT_3D('',#6386,#10173,#5857);+#10858=ADVANCED_FACE('',(#10859),#10864,.F.);+#10859=FACE_BOUND('',#10860,.F.);+#10860=EDGE_LOOP('',(#10861,#6449,#10862,#10863));+#10861=ORIENTED_EDGE('',*,*,#10216,.T.);+#10862=ORIENTED_EDGE('',*,*,#10852,.F.);+#10863=ORIENTED_EDGE('',*,*,#6384,.F.);+#10864=CYLINDRICAL_SURFACE('',#6388,0.1);+#10865=ADVANCED_FACE('',(#10866),#10873,.F.);+#10866=FACE_BOUND('',#10867,.F.);+#10867=EDGE_LOOP('',(#10868,#6636,#10871,#10872));+#10868=ORIENTED_EDGE('',*,*,#10869,.T.);+#10869=EDGE_CURVE('',#6566,#6632,#10870,.T.);+#10870=LINE('',#6567,#751);+#10871=ORIENTED_EDGE('',*,*,#6652,.F.);+#10872=ORIENTED_EDGE('',*,*,#6571,.F.);+#10873=PLANE('',#10874);+#10874=AXIS2_PLACEMENT_3D('',#6567,#10113,#5894);+#10875=ADVANCED_FACE('',(#10876),#10883,.F.);+#10876=FACE_BOUND('',#10877,.F.);+#10877=EDGE_LOOP('',(#10878,#6630,#10881,#10882));+#10878=ORIENTED_EDGE('',*,*,#10879,.T.);+#10879=EDGE_CURVE('',#6561,#6627,#10880,.T.);+#10880=LINE('',#6562,#751);+#10881=ORIENTED_EDGE('',*,*,#10869,.F.);+#10882=ORIENTED_EDGE('',*,*,#6565,.F.);+#10883=CYLINDRICAL_SURFACE('',#6569,1.E-01);+#10884=ADVANCED_FACE('',(#10885),#10892,.F.);+#10885=FACE_BOUND('',#10886,.F.);+#10886=EDGE_LOOP('',(#10887,#6625,#10890,#10891));+#10887=ORIENTED_EDGE('',*,*,#10888,.T.);+#10888=EDGE_CURVE('',#6556,#6622,#10889,.T.);+#10889=LINE('',#6557,#751);+#10890=ORIENTED_EDGE('',*,*,#10879,.F.);+#10891=ORIENTED_EDGE('',*,*,#6560,.F.);+#10892=PLANE('',#10893);+#10893=AXIS2_PLACEMENT_3D('',#6557,#312,#760);+#10894=ADVANCED_FACE('',(#10895),#10902,.F.);+#10895=FACE_BOUND('',#10896,.F.);+#10896=EDGE_LOOP('',(#10897,#6620,#10900,#10901));+#10897=ORIENTED_EDGE('',*,*,#10898,.T.);+#10898=EDGE_CURVE('',#6551,#6617,#10899,.T.);+#10899=LINE('',#6552,#751);+#10900=ORIENTED_EDGE('',*,*,#10888,.F.);+#10901=ORIENTED_EDGE('',*,*,#6555,.F.);+#10902=PLANE('',#10903);+#10903=AXIS2_PLACEMENT_3D('',#6552,#760,#13);+#10904=ADVANCED_FACE('',(#10905),#10912,.F.);+#10905=FACE_BOUND('',#10906,.F.);+#10906=EDGE_LOOP('',(#10907,#6615,#10910,#10911));+#10907=ORIENTED_EDGE('',*,*,#10908,.T.);+#10908=EDGE_CURVE('',#6544,#6610,#10909,.T.);+#10909=LINE('',#6545,#751);+#10910=ORIENTED_EDGE('',*,*,#10898,.F.);+#10911=ORIENTED_EDGE('',*,*,#6550,.F.);+#10912=PLANE('',#10913);+#10913=AXIS2_PLACEMENT_3D('',#6545,#13,#50);+#10914=ADVANCED_FACE('',(#10915),#10922,.T.);+#10915=FACE_BOUND('',#10916,.F.);+#10916=EDGE_LOOP('',(#10917,#6608,#10920,#10921));+#10917=ORIENTED_EDGE('',*,*,#10918,.T.);+#10918=EDGE_CURVE('',#6539,#6605,#10919,.T.);+#10919=LINE('',#6540,#751);+#10920=ORIENTED_EDGE('',*,*,#10908,.F.);+#10921=ORIENTED_EDGE('',*,*,#6543,.F.);+#10922=CYLINDRICAL_SURFACE('',#10923,0.2);+#10923=AXIS2_PLACEMENT_3D('',#6548,#270,#5865);+#10924=ADVANCED_FACE('',(#10925),#10932,.F.);+#10925=FACE_BOUND('',#10926,.F.);+#10926=EDGE_LOOP('',(#10927,#6603,#10930,#10931));+#10927=ORIENTED_EDGE('',*,*,#10928,.T.);+#10928=EDGE_CURVE('',#6532,#6598,#10929,.T.);+#10929=LINE('',#6533,#751);+#10930=ORIENTED_EDGE('',*,*,#10918,.F.);+#10931=ORIENTED_EDGE('',*,*,#6538,.F.);+#10932=PLANE('',#10933);+#10933=AXIS2_PLACEMENT_3D('',#6533,#10173,#5857);+#10934=ADVANCED_FACE('',(#10935),#10940,.F.);+#10935=FACE_BOUND('',#10936,.F.);+#10936=EDGE_LOOP('',(#10937,#6596,#10938,#10939));+#10937=ORIENTED_EDGE('',*,*,#10226,.T.);+#10938=ORIENTED_EDGE('',*,*,#10928,.F.);+#10939=ORIENTED_EDGE('',*,*,#6531,.F.);+#10940=CYLINDRICAL_SURFACE('',#6535,0.1);+#10941=ADVANCED_FACE('',(#10942),#10949,.F.);+#10942=FACE_BOUND('',#10943,.F.);+#10943=EDGE_LOOP('',(#10944,#6783,#10947,#10948));+#10944=ORIENTED_EDGE('',*,*,#10945,.T.);+#10945=EDGE_CURVE('',#6713,#6779,#10946,.T.);+#10946=LINE('',#6714,#751);+#10947=ORIENTED_EDGE('',*,*,#6799,.F.);+#10948=ORIENTED_EDGE('',*,*,#6718,.F.);+#10949=PLANE('',#10950);+#10950=AXIS2_PLACEMENT_3D('',#6714,#10113,#5894);+#10951=ADVANCED_FACE('',(#10952),#10959,.F.);+#10952=FACE_BOUND('',#10953,.F.);+#10953=EDGE_LOOP('',(#10954,#6777,#10957,#10958));+#10954=ORIENTED_EDGE('',*,*,#10955,.T.);+#10955=EDGE_CURVE('',#6708,#6774,#10956,.T.);+#10956=LINE('',#6709,#751);+#10957=ORIENTED_EDGE('',*,*,#10945,.F.);+#10958=ORIENTED_EDGE('',*,*,#6712,.F.);+#10959=CYLINDRICAL_SURFACE('',#6716,1.E-01);+#10960=ADVANCED_FACE('',(#10961),#10968,.F.);+#10961=FACE_BOUND('',#10962,.F.);+#10962=EDGE_LOOP('',(#10963,#6772,#10966,#10967));+#10963=ORIENTED_EDGE('',*,*,#10964,.T.);+#10964=EDGE_CURVE('',#6703,#6769,#10965,.T.);+#10965=LINE('',#6704,#751);+#10966=ORIENTED_EDGE('',*,*,#10955,.F.);+#10967=ORIENTED_EDGE('',*,*,#6707,.F.);+#10968=PLANE('',#10969);+#10969=AXIS2_PLACEMENT_3D('',#6704,#312,#760);+#10970=ADVANCED_FACE('',(#10971),#10978,.F.);+#10971=FACE_BOUND('',#10972,.F.);+#10972=EDGE_LOOP('',(#10973,#6767,#10976,#10977));+#10973=ORIENTED_EDGE('',*,*,#10974,.T.);+#10974=EDGE_CURVE('',#6698,#6764,#10975,.T.);+#10975=LINE('',#6699,#751);+#10976=ORIENTED_EDGE('',*,*,#10964,.F.);+#10977=ORIENTED_EDGE('',*,*,#6702,.F.);+#10978=PLANE('',#10979);+#10979=AXIS2_PLACEMENT_3D('',#6699,#760,#13);+#10980=ADVANCED_FACE('',(#10981),#10988,.F.);+#10981=FACE_BOUND('',#10982,.F.);+#10982=EDGE_LOOP('',(#10983,#6762,#10986,#10987));+#10983=ORIENTED_EDGE('',*,*,#10984,.T.);+#10984=EDGE_CURVE('',#6691,#6757,#10985,.T.);+#10985=LINE('',#6692,#751);+#10986=ORIENTED_EDGE('',*,*,#10974,.F.);+#10987=ORIENTED_EDGE('',*,*,#6697,.F.);+#10988=PLANE('',#10989);+#10989=AXIS2_PLACEMENT_3D('',#6692,#13,#50);+#10990=ADVANCED_FACE('',(#10991),#10998,.T.);+#10991=FACE_BOUND('',#10992,.F.);+#10992=EDGE_LOOP('',(#10993,#6755,#10996,#10997));+#10993=ORIENTED_EDGE('',*,*,#10994,.T.);+#10994=EDGE_CURVE('',#6686,#6752,#10995,.T.);+#10995=LINE('',#6687,#751);+#10996=ORIENTED_EDGE('',*,*,#10984,.F.);+#10997=ORIENTED_EDGE('',*,*,#6690,.F.);+#10998=CYLINDRICAL_SURFACE('',#10999,0.2);+#10999=AXIS2_PLACEMENT_3D('',#6695,#270,#5865);+#11000=ADVANCED_FACE('',(#11001),#11008,.F.);+#11001=FACE_BOUND('',#11002,.F.);+#11002=EDGE_LOOP('',(#11003,#6750,#11006,#11007));+#11003=ORIENTED_EDGE('',*,*,#11004,.T.);+#11004=EDGE_CURVE('',#6679,#6745,#11005,.T.);+#11005=LINE('',#6680,#751);+#11006=ORIENTED_EDGE('',*,*,#10994,.F.);+#11007=ORIENTED_EDGE('',*,*,#6685,.F.);+#11008=PLANE('',#11009);+#11009=AXIS2_PLACEMENT_3D('',#6680,#10173,#5857);+#11010=ADVANCED_FACE('',(#11011),#11016,.F.);+#11011=FACE_BOUND('',#11012,.F.);+#11012=EDGE_LOOP('',(#11013,#6743,#11014,#11015));+#11013=ORIENTED_EDGE('',*,*,#10236,.T.);+#11014=ORIENTED_EDGE('',*,*,#11004,.F.);+#11015=ORIENTED_EDGE('',*,*,#6678,.F.);+#11016=CYLINDRICAL_SURFACE('',#6682,0.1);+#11017=ADVANCED_FACE('',(#11018),#11025,.F.);+#11018=FACE_BOUND('',#11019,.F.);+#11019=EDGE_LOOP('',(#11020,#6930,#11023,#11024));+#11020=ORIENTED_EDGE('',*,*,#11021,.T.);+#11021=EDGE_CURVE('',#6860,#6926,#11022,.T.);+#11022=LINE('',#6861,#751);+#11023=ORIENTED_EDGE('',*,*,#6946,.F.);+#11024=ORIENTED_EDGE('',*,*,#6865,.F.);+#11025=PLANE('',#11026);+#11026=AXIS2_PLACEMENT_3D('',#6861,#10113,#5894);+#11027=ADVANCED_FACE('',(#11028),#11035,.F.);+#11028=FACE_BOUND('',#11029,.F.);+#11029=EDGE_LOOP('',(#11030,#6924,#11033,#11034));+#11030=ORIENTED_EDGE('',*,*,#11031,.T.);+#11031=EDGE_CURVE('',#6855,#6921,#11032,.T.);+#11032=LINE('',#6856,#751);+#11033=ORIENTED_EDGE('',*,*,#11021,.F.);+#11034=ORIENTED_EDGE('',*,*,#6859,.F.);+#11035=CYLINDRICAL_SURFACE('',#6863,1.E-01);+#11036=ADVANCED_FACE('',(#11037),#11044,.F.);+#11037=FACE_BOUND('',#11038,.F.);+#11038=EDGE_LOOP('',(#11039,#6919,#11042,#11043));+#11039=ORIENTED_EDGE('',*,*,#11040,.T.);+#11040=EDGE_CURVE('',#6850,#6916,#11041,.T.);+#11041=LINE('',#6851,#751);+#11042=ORIENTED_EDGE('',*,*,#11031,.F.);+#11043=ORIENTED_EDGE('',*,*,#6854,.F.);+#11044=PLANE('',#11045);+#11045=AXIS2_PLACEMENT_3D('',#6851,#312,#760);+#11046=ADVANCED_FACE('',(#11047),#11054,.F.);+#11047=FACE_BOUND('',#11048,.F.);+#11048=EDGE_LOOP('',(#11049,#6914,#11052,#11053));+#11049=ORIENTED_EDGE('',*,*,#11050,.T.);+#11050=EDGE_CURVE('',#6845,#6911,#11051,.T.);+#11051=LINE('',#6846,#751);+#11052=ORIENTED_EDGE('',*,*,#11040,.F.);+#11053=ORIENTED_EDGE('',*,*,#6849,.F.);+#11054=PLANE('',#11055);+#11055=AXIS2_PLACEMENT_3D('',#6846,#760,#13);+#11056=ADVANCED_FACE('',(#11057),#11064,.F.);+#11057=FACE_BOUND('',#11058,.F.);+#11058=EDGE_LOOP('',(#11059,#6909,#11062,#11063));+#11059=ORIENTED_EDGE('',*,*,#11060,.T.);+#11060=EDGE_CURVE('',#6838,#6904,#11061,.T.);+#11061=LINE('',#6839,#751);+#11062=ORIENTED_EDGE('',*,*,#11050,.F.);+#11063=ORIENTED_EDGE('',*,*,#6844,.F.);+#11064=PLANE('',#11065);+#11065=AXIS2_PLACEMENT_3D('',#6839,#13,#50);+#11066=ADVANCED_FACE('',(#11067),#11074,.T.);+#11067=FACE_BOUND('',#11068,.F.);+#11068=EDGE_LOOP('',(#11069,#6902,#11072,#11073));+#11069=ORIENTED_EDGE('',*,*,#11070,.T.);+#11070=EDGE_CURVE('',#6833,#6899,#11071,.T.);+#11071=LINE('',#6834,#751);+#11072=ORIENTED_EDGE('',*,*,#11060,.F.);+#11073=ORIENTED_EDGE('',*,*,#6837,.F.);+#11074=CYLINDRICAL_SURFACE('',#11075,0.2);+#11075=AXIS2_PLACEMENT_3D('',#6842,#270,#5865);+#11076=ADVANCED_FACE('',(#11077),#11084,.F.);+#11077=FACE_BOUND('',#11078,.F.);+#11078=EDGE_LOOP('',(#11079,#6897,#11082,#11083));+#11079=ORIENTED_EDGE('',*,*,#11080,.T.);+#11080=EDGE_CURVE('',#6826,#6892,#11081,.T.);+#11081=LINE('',#6827,#751);+#11082=ORIENTED_EDGE('',*,*,#11070,.F.);+#11083=ORIENTED_EDGE('',*,*,#6832,.F.);+#11084=PLANE('',#11085);+#11085=AXIS2_PLACEMENT_3D('',#6827,#10173,#5857);+#11086=ADVANCED_FACE('',(#11087),#11092,.F.);+#11087=FACE_BOUND('',#11088,.F.);+#11088=EDGE_LOOP('',(#11089,#6890,#11090,#11091));+#11089=ORIENTED_EDGE('',*,*,#10246,.T.);+#11090=ORIENTED_EDGE('',*,*,#11080,.F.);+#11091=ORIENTED_EDGE('',*,*,#6825,.F.);+#11092=CYLINDRICAL_SURFACE('',#6829,0.1);+#11093=ADVANCED_FACE('',(#11094),#11101,.F.);+#11094=FACE_BOUND('',#11095,.F.);+#11095=EDGE_LOOP('',(#11096,#7077,#11099,#11100));+#11096=ORIENTED_EDGE('',*,*,#11097,.T.);+#11097=EDGE_CURVE('',#7007,#7073,#11098,.T.);+#11098=LINE('',#7008,#751);+#11099=ORIENTED_EDGE('',*,*,#7093,.F.);+#11100=ORIENTED_EDGE('',*,*,#7012,.F.);+#11101=PLANE('',#11102);+#11102=AXIS2_PLACEMENT_3D('',#7008,#10113,#5894);+#11103=ADVANCED_FACE('',(#11104),#11111,.F.);+#11104=FACE_BOUND('',#11105,.F.);+#11105=EDGE_LOOP('',(#11106,#7071,#11109,#11110));+#11106=ORIENTED_EDGE('',*,*,#11107,.T.);+#11107=EDGE_CURVE('',#7002,#7068,#11108,.T.);+#11108=LINE('',#7003,#751);+#11109=ORIENTED_EDGE('',*,*,#11097,.F.);+#11110=ORIENTED_EDGE('',*,*,#7006,.F.);+#11111=CYLINDRICAL_SURFACE('',#7010,1.E-01);+#11112=ADVANCED_FACE('',(#11113),#11120,.F.);+#11113=FACE_BOUND('',#11114,.F.);+#11114=EDGE_LOOP('',(#11115,#7066,#11118,#11119));+#11115=ORIENTED_EDGE('',*,*,#11116,.T.);+#11116=EDGE_CURVE('',#6997,#7063,#11117,.T.);+#11117=LINE('',#6998,#751);+#11118=ORIENTED_EDGE('',*,*,#11107,.F.);+#11119=ORIENTED_EDGE('',*,*,#7001,.F.);+#11120=PLANE('',#11121);+#11121=AXIS2_PLACEMENT_3D('',#6998,#312,#760);+#11122=ADVANCED_FACE('',(#11123),#11130,.F.);+#11123=FACE_BOUND('',#11124,.F.);+#11124=EDGE_LOOP('',(#11125,#7061,#11128,#11129));+#11125=ORIENTED_EDGE('',*,*,#11126,.T.);+#11126=EDGE_CURVE('',#6992,#7058,#11127,.T.);+#11127=LINE('',#6993,#751);+#11128=ORIENTED_EDGE('',*,*,#11116,.F.);+#11129=ORIENTED_EDGE('',*,*,#6996,.F.);+#11130=PLANE('',#11131);+#11131=AXIS2_PLACEMENT_3D('',#6993,#760,#13);+#11132=ADVANCED_FACE('',(#11133),#11140,.F.);+#11133=FACE_BOUND('',#11134,.F.);+#11134=EDGE_LOOP('',(#11135,#7056,#11138,#11139));+#11135=ORIENTED_EDGE('',*,*,#11136,.T.);+#11136=EDGE_CURVE('',#6985,#7051,#11137,.T.);+#11137=LINE('',#6986,#751);+#11138=ORIENTED_EDGE('',*,*,#11126,.F.);+#11139=ORIENTED_EDGE('',*,*,#6991,.F.);+#11140=PLANE('',#11141);+#11141=AXIS2_PLACEMENT_3D('',#6986,#13,#50);+#11142=ADVANCED_FACE('',(#11143),#11150,.T.);+#11143=FACE_BOUND('',#11144,.F.);+#11144=EDGE_LOOP('',(#11145,#7049,#11148,#11149));+#11145=ORIENTED_EDGE('',*,*,#11146,.T.);+#11146=EDGE_CURVE('',#6980,#7046,#11147,.T.);+#11147=LINE('',#6981,#751);+#11148=ORIENTED_EDGE('',*,*,#11136,.F.);+#11149=ORIENTED_EDGE('',*,*,#6984,.F.);+#11150=CYLINDRICAL_SURFACE('',#11151,0.2);+#11151=AXIS2_PLACEMENT_3D('',#6989,#270,#5865);+#11152=ADVANCED_FACE('',(#11153),#11160,.F.);+#11153=FACE_BOUND('',#11154,.F.);+#11154=EDGE_LOOP('',(#11155,#7044,#11158,#11159));+#11155=ORIENTED_EDGE('',*,*,#11156,.T.);+#11156=EDGE_CURVE('',#6973,#7039,#11157,.T.);+#11157=LINE('',#6974,#751);+#11158=ORIENTED_EDGE('',*,*,#11146,.F.);+#11159=ORIENTED_EDGE('',*,*,#6979,.F.);+#11160=PLANE('',#11161);+#11161=AXIS2_PLACEMENT_3D('',#6974,#10173,#5857);+#11162=ADVANCED_FACE('',(#11163),#11168,.F.);+#11163=FACE_BOUND('',#11164,.F.);+#11164=EDGE_LOOP('',(#11165,#7037,#11166,#11167));+#11165=ORIENTED_EDGE('',*,*,#10256,.T.);+#11166=ORIENTED_EDGE('',*,*,#11156,.F.);+#11167=ORIENTED_EDGE('',*,*,#6972,.F.);+#11168=CYLINDRICAL_SURFACE('',#6976,0.1);+#11169=ADVANCED_FACE('',(#11170),#11177,.F.);+#11170=FACE_BOUND('',#11171,.F.);+#11171=EDGE_LOOP('',(#11172,#7224,#11175,#11176));+#11172=ORIENTED_EDGE('',*,*,#11173,.T.);+#11173=EDGE_CURVE('',#7154,#7220,#11174,.T.);+#11174=LINE('',#7155,#751);+#11175=ORIENTED_EDGE('',*,*,#7240,.F.);+#11176=ORIENTED_EDGE('',*,*,#7159,.F.);+#11177=PLANE('',#11178);+#11178=AXIS2_PLACEMENT_3D('',#7155,#10113,#5894);+#11179=ADVANCED_FACE('',(#11180),#11187,.F.);+#11180=FACE_BOUND('',#11181,.F.);+#11181=EDGE_LOOP('',(#11182,#7218,#11185,#11186));+#11182=ORIENTED_EDGE('',*,*,#11183,.T.);+#11183=EDGE_CURVE('',#7149,#7215,#11184,.T.);+#11184=LINE('',#7150,#751);+#11185=ORIENTED_EDGE('',*,*,#11173,.F.);+#11186=ORIENTED_EDGE('',*,*,#7153,.F.);+#11187=CYLINDRICAL_SURFACE('',#7157,1.E-01);+#11188=ADVANCED_FACE('',(#11189),#11196,.F.);+#11189=FACE_BOUND('',#11190,.F.);+#11190=EDGE_LOOP('',(#11191,#7213,#11194,#11195));+#11191=ORIENTED_EDGE('',*,*,#11192,.T.);+#11192=EDGE_CURVE('',#7144,#7210,#11193,.T.);+#11193=LINE('',#7145,#751);+#11194=ORIENTED_EDGE('',*,*,#11183,.F.);+#11195=ORIENTED_EDGE('',*,*,#7148,.F.);+#11196=PLANE('',#11197);+#11197=AXIS2_PLACEMENT_3D('',#7145,#312,#760);+#11198=ADVANCED_FACE('',(#11199),#11206,.F.);+#11199=FACE_BOUND('',#11200,.F.);+#11200=EDGE_LOOP('',(#11201,#7208,#11204,#11205));+#11201=ORIENTED_EDGE('',*,*,#11202,.T.);+#11202=EDGE_CURVE('',#7139,#7205,#11203,.T.);+#11203=LINE('',#7140,#751);+#11204=ORIENTED_EDGE('',*,*,#11192,.F.);+#11205=ORIENTED_EDGE('',*,*,#7143,.F.);+#11206=PLANE('',#11207);+#11207=AXIS2_PLACEMENT_3D('',#7140,#760,#13);+#11208=ADVANCED_FACE('',(#11209),#11216,.F.);+#11209=FACE_BOUND('',#11210,.F.);+#11210=EDGE_LOOP('',(#11211,#7203,#11214,#11215));+#11211=ORIENTED_EDGE('',*,*,#11212,.T.);+#11212=EDGE_CURVE('',#7132,#7198,#11213,.T.);+#11213=LINE('',#7133,#751);+#11214=ORIENTED_EDGE('',*,*,#11202,.F.);+#11215=ORIENTED_EDGE('',*,*,#7138,.F.);+#11216=PLANE('',#11217);+#11217=AXIS2_PLACEMENT_3D('',#7133,#13,#50);+#11218=ADVANCED_FACE('',(#11219),#11226,.T.);+#11219=FACE_BOUND('',#11220,.F.);+#11220=EDGE_LOOP('',(#11221,#7196,#11224,#11225));+#11221=ORIENTED_EDGE('',*,*,#11222,.T.);+#11222=EDGE_CURVE('',#7127,#7193,#11223,.T.);+#11223=LINE('',#7128,#751);+#11224=ORIENTED_EDGE('',*,*,#11212,.F.);+#11225=ORIENTED_EDGE('',*,*,#7131,.F.);+#11226=CYLINDRICAL_SURFACE('',#11227,0.2);+#11227=AXIS2_PLACEMENT_3D('',#7136,#270,#5865);+#11228=ADVANCED_FACE('',(#11229),#11236,.F.);+#11229=FACE_BOUND('',#11230,.F.);+#11230=EDGE_LOOP('',(#11231,#7191,#11234,#11235));+#11231=ORIENTED_EDGE('',*,*,#11232,.T.);+#11232=EDGE_CURVE('',#7120,#7186,#11233,.T.);+#11233=LINE('',#7121,#751);+#11234=ORIENTED_EDGE('',*,*,#11222,.F.);+#11235=ORIENTED_EDGE('',*,*,#7126,.F.);+#11236=PLANE('',#11237);+#11237=AXIS2_PLACEMENT_3D('',#7121,#10173,#5857);+#11238=ADVANCED_FACE('',(#11239),#11244,.F.);+#11239=FACE_BOUND('',#11240,.F.);+#11240=EDGE_LOOP('',(#11241,#7184,#11242,#11243));+#11241=ORIENTED_EDGE('',*,*,#10266,.T.);+#11242=ORIENTED_EDGE('',*,*,#11232,.F.);+#11243=ORIENTED_EDGE('',*,*,#7119,.F.);+#11244=CYLINDRICAL_SURFACE('',#7123,0.1);+#11245=ADVANCED_FACE('',(#11246),#11253,.F.);+#11246=FACE_BOUND('',#11247,.F.);+#11247=EDGE_LOOP('',(#11248,#7371,#11251,#11252));+#11248=ORIENTED_EDGE('',*,*,#11249,.T.);+#11249=EDGE_CURVE('',#7301,#7367,#11250,.T.);+#11250=LINE('',#7302,#751);+#11251=ORIENTED_EDGE('',*,*,#7387,.F.);+#11252=ORIENTED_EDGE('',*,*,#7306,.F.);+#11253=PLANE('',#11254);+#11254=AXIS2_PLACEMENT_3D('',#7302,#10113,#5894);+#11255=ADVANCED_FACE('',(#11256),#11263,.F.);+#11256=FACE_BOUND('',#11257,.F.);+#11257=EDGE_LOOP('',(#11258,#7365,#11261,#11262));+#11258=ORIENTED_EDGE('',*,*,#11259,.T.);+#11259=EDGE_CURVE('',#7296,#7362,#11260,.T.);+#11260=LINE('',#7297,#751);+#11261=ORIENTED_EDGE('',*,*,#11249,.F.);+#11262=ORIENTED_EDGE('',*,*,#7300,.F.);+#11263=CYLINDRICAL_SURFACE('',#7304,1.E-01);+#11264=ADVANCED_FACE('',(#11265),#11272,.F.);+#11265=FACE_BOUND('',#11266,.F.);+#11266=EDGE_LOOP('',(#11267,#7360,#11270,#11271));+#11267=ORIENTED_EDGE('',*,*,#11268,.T.);+#11268=EDGE_CURVE('',#7291,#7357,#11269,.T.);+#11269=LINE('',#7292,#751);+#11270=ORIENTED_EDGE('',*,*,#11259,.F.);+#11271=ORIENTED_EDGE('',*,*,#7295,.F.);+#11272=PLANE('',#11273);+#11273=AXIS2_PLACEMENT_3D('',#7292,#312,#760);+#11274=ADVANCED_FACE('',(#11275),#11282,.F.);+#11275=FACE_BOUND('',#11276,.F.);+#11276=EDGE_LOOP('',(#11277,#7355,#11280,#11281));+#11277=ORIENTED_EDGE('',*,*,#11278,.T.);+#11278=EDGE_CURVE('',#7286,#7352,#11279,.T.);+#11279=LINE('',#7287,#751);+#11280=ORIENTED_EDGE('',*,*,#11268,.F.);+#11281=ORIENTED_EDGE('',*,*,#7290,.F.);+#11282=PLANE('',#11283);+#11283=AXIS2_PLACEMENT_3D('',#7287,#760,#13);+#11284=ADVANCED_FACE('',(#11285),#11292,.F.);+#11285=FACE_BOUND('',#11286,.F.);+#11286=EDGE_LOOP('',(#11287,#7350,#11290,#11291));+#11287=ORIENTED_EDGE('',*,*,#11288,.T.);+#11288=EDGE_CURVE('',#7279,#7345,#11289,.T.);+#11289=LINE('',#7280,#751);+#11290=ORIENTED_EDGE('',*,*,#11278,.F.);+#11291=ORIENTED_EDGE('',*,*,#7285,.F.);+#11292=PLANE('',#11293);+#11293=AXIS2_PLACEMENT_3D('',#7280,#13,#50);+#11294=ADVANCED_FACE('',(#11295),#11302,.T.);+#11295=FACE_BOUND('',#11296,.F.);+#11296=EDGE_LOOP('',(#11297,#7343,#11300,#11301));+#11297=ORIENTED_EDGE('',*,*,#11298,.T.);+#11298=EDGE_CURVE('',#7274,#7340,#11299,.T.);+#11299=LINE('',#7275,#751);+#11300=ORIENTED_EDGE('',*,*,#11288,.F.);+#11301=ORIENTED_EDGE('',*,*,#7278,.F.);+#11302=CYLINDRICAL_SURFACE('',#11303,0.2);+#11303=AXIS2_PLACEMENT_3D('',#7283,#270,#5865);+#11304=ADVANCED_FACE('',(#11305),#11312,.F.);+#11305=FACE_BOUND('',#11306,.F.);+#11306=EDGE_LOOP('',(#11307,#7338,#11310,#11311));+#11307=ORIENTED_EDGE('',*,*,#11308,.T.);+#11308=EDGE_CURVE('',#7267,#7333,#11309,.T.);+#11309=LINE('',#7268,#751);+#11310=ORIENTED_EDGE('',*,*,#11298,.F.);+#11311=ORIENTED_EDGE('',*,*,#7273,.F.);+#11312=PLANE('',#11313);+#11313=AXIS2_PLACEMENT_3D('',#7268,#10173,#5857);+#11314=ADVANCED_FACE('',(#11315),#11320,.F.);+#11315=FACE_BOUND('',#11316,.F.);+#11316=EDGE_LOOP('',(#11317,#7331,#11318,#11319));+#11317=ORIENTED_EDGE('',*,*,#10276,.T.);+#11318=ORIENTED_EDGE('',*,*,#11308,.F.);+#11319=ORIENTED_EDGE('',*,*,#7266,.F.);+#11320=CYLINDRICAL_SURFACE('',#7270,0.1);+#11321=ADVANCED_FACE('',(#11322),#11329,.F.);+#11322=FACE_BOUND('',#11323,.F.);+#11323=EDGE_LOOP('',(#11324,#7518,#11327,#11328));+#11324=ORIENTED_EDGE('',*,*,#11325,.T.);+#11325=EDGE_CURVE('',#7448,#7514,#11326,.T.);+#11326=LINE('',#7449,#751);+#11327=ORIENTED_EDGE('',*,*,#7534,.F.);+#11328=ORIENTED_EDGE('',*,*,#7453,.F.);+#11329=PLANE('',#11330);+#11330=AXIS2_PLACEMENT_3D('',#7449,#10113,#5894);+#11331=ADVANCED_FACE('',(#11332),#11339,.F.);+#11332=FACE_BOUND('',#11333,.F.);+#11333=EDGE_LOOP('',(#11334,#7512,#11337,#11338));+#11334=ORIENTED_EDGE('',*,*,#11335,.T.);+#11335=EDGE_CURVE('',#7443,#7509,#11336,.T.);+#11336=LINE('',#7444,#751);+#11337=ORIENTED_EDGE('',*,*,#11325,.F.);+#11338=ORIENTED_EDGE('',*,*,#7447,.F.);+#11339=CYLINDRICAL_SURFACE('',#7451,1.E-01);+#11340=ADVANCED_FACE('',(#11341),#11348,.F.);+#11341=FACE_BOUND('',#11342,.F.);+#11342=EDGE_LOOP('',(#11343,#7507,#11346,#11347));+#11343=ORIENTED_EDGE('',*,*,#11344,.T.);+#11344=EDGE_CURVE('',#7438,#7504,#11345,.T.);+#11345=LINE('',#7439,#751);+#11346=ORIENTED_EDGE('',*,*,#11335,.F.);+#11347=ORIENTED_EDGE('',*,*,#7442,.F.);+#11348=PLANE('',#11349);+#11349=AXIS2_PLACEMENT_3D('',#7439,#312,#760);+#11350=ADVANCED_FACE('',(#11351),#11358,.F.);+#11351=FACE_BOUND('',#11352,.F.);+#11352=EDGE_LOOP('',(#11353,#7502,#11356,#11357));+#11353=ORIENTED_EDGE('',*,*,#11354,.T.);+#11354=EDGE_CURVE('',#7433,#7499,#11355,.T.);+#11355=LINE('',#7434,#751);+#11356=ORIENTED_EDGE('',*,*,#11344,.F.);+#11357=ORIENTED_EDGE('',*,*,#7437,.F.);+#11358=PLANE('',#11359);+#11359=AXIS2_PLACEMENT_3D('',#7434,#760,#13);+#11360=ADVANCED_FACE('',(#11361),#11368,.F.);+#11361=FACE_BOUND('',#11362,.F.);+#11362=EDGE_LOOP('',(#11363,#7497,#11366,#11367));+#11363=ORIENTED_EDGE('',*,*,#11364,.T.);+#11364=EDGE_CURVE('',#7426,#7492,#11365,.T.);+#11365=LINE('',#7427,#751);+#11366=ORIENTED_EDGE('',*,*,#11354,.F.);+#11367=ORIENTED_EDGE('',*,*,#7432,.F.);+#11368=PLANE('',#11369);+#11369=AXIS2_PLACEMENT_3D('',#7427,#13,#50);+#11370=ADVANCED_FACE('',(#11371),#11378,.T.);+#11371=FACE_BOUND('',#11372,.F.);+#11372=EDGE_LOOP('',(#11373,#7490,#11376,#11377));+#11373=ORIENTED_EDGE('',*,*,#11374,.T.);+#11374=EDGE_CURVE('',#7421,#7487,#11375,.T.);+#11375=LINE('',#7422,#751);+#11376=ORIENTED_EDGE('',*,*,#11364,.F.);+#11377=ORIENTED_EDGE('',*,*,#7425,.F.);+#11378=CYLINDRICAL_SURFACE('',#11379,0.2);+#11379=AXIS2_PLACEMENT_3D('',#7430,#270,#5865);+#11380=ADVANCED_FACE('',(#11381),#11388,.F.);+#11381=FACE_BOUND('',#11382,.F.);+#11382=EDGE_LOOP('',(#11383,#7485,#11386,#11387));+#11383=ORIENTED_EDGE('',*,*,#11384,.T.);+#11384=EDGE_CURVE('',#7414,#7480,#11385,.T.);+#11385=LINE('',#7415,#751);+#11386=ORIENTED_EDGE('',*,*,#11374,.F.);+#11387=ORIENTED_EDGE('',*,*,#7420,.F.);+#11388=PLANE('',#11389);+#11389=AXIS2_PLACEMENT_3D('',#7415,#10173,#5857);+#11390=ADVANCED_FACE('',(#11391),#11396,.F.);+#11391=FACE_BOUND('',#11392,.F.);+#11392=EDGE_LOOP('',(#11393,#7478,#11394,#11395));+#11393=ORIENTED_EDGE('',*,*,#10286,.T.);+#11394=ORIENTED_EDGE('',*,*,#11384,.F.);+#11395=ORIENTED_EDGE('',*,*,#7413,.F.);+#11396=CYLINDRICAL_SURFACE('',#7417,0.1);+#11397=ADVANCED_FACE('',(#11398),#11405,.F.);+#11398=FACE_BOUND('',#11399,.F.);+#11399=EDGE_LOOP('',(#11400,#7665,#11403,#11404));+#11400=ORIENTED_EDGE('',*,*,#11401,.T.);+#11401=EDGE_CURVE('',#7595,#7661,#11402,.T.);+#11402=LINE('',#7596,#751);+#11403=ORIENTED_EDGE('',*,*,#7681,.F.);+#11404=ORIENTED_EDGE('',*,*,#7600,.F.);+#11405=PLANE('',#11406);+#11406=AXIS2_PLACEMENT_3D('',#7596,#10113,#5894);+#11407=ADVANCED_FACE('',(#11408),#11415,.F.);+#11408=FACE_BOUND('',#11409,.F.);+#11409=EDGE_LOOP('',(#11410,#7659,#11413,#11414));+#11410=ORIENTED_EDGE('',*,*,#11411,.T.);+#11411=EDGE_CURVE('',#7590,#7656,#11412,.T.);+#11412=LINE('',#7591,#751);+#11413=ORIENTED_EDGE('',*,*,#11401,.F.);+#11414=ORIENTED_EDGE('',*,*,#7594,.F.);+#11415=CYLINDRICAL_SURFACE('',#7598,1.E-01);+#11416=ADVANCED_FACE('',(#11417),#11424,.F.);+#11417=FACE_BOUND('',#11418,.F.);+#11418=EDGE_LOOP('',(#11419,#7654,#11422,#11423));+#11419=ORIENTED_EDGE('',*,*,#11420,.T.);+#11420=EDGE_CURVE('',#7585,#7651,#11421,.T.);+#11421=LINE('',#7586,#751);+#11422=ORIENTED_EDGE('',*,*,#11411,.F.);+#11423=ORIENTED_EDGE('',*,*,#7589,.F.);+#11424=PLANE('',#11425);+#11425=AXIS2_PLACEMENT_3D('',#7586,#312,#760);+#11426=ADVANCED_FACE('',(#11427),#11434,.F.);+#11427=FACE_BOUND('',#11428,.F.);+#11428=EDGE_LOOP('',(#11429,#7649,#11432,#11433));+#11429=ORIENTED_EDGE('',*,*,#11430,.T.);+#11430=EDGE_CURVE('',#7580,#7646,#11431,.T.);+#11431=LINE('',#7581,#751);+#11432=ORIENTED_EDGE('',*,*,#11420,.F.);+#11433=ORIENTED_EDGE('',*,*,#7584,.F.);+#11434=PLANE('',#11435);+#11435=AXIS2_PLACEMENT_3D('',#7581,#760,#13);+#11436=ADVANCED_FACE('',(#11437),#11444,.F.);+#11437=FACE_BOUND('',#11438,.F.);+#11438=EDGE_LOOP('',(#11439,#7644,#11442,#11443));+#11439=ORIENTED_EDGE('',*,*,#11440,.T.);+#11440=EDGE_CURVE('',#7573,#7639,#11441,.T.);+#11441=LINE('',#7574,#751);+#11442=ORIENTED_EDGE('',*,*,#11430,.F.);+#11443=ORIENTED_EDGE('',*,*,#7579,.F.);+#11444=PLANE('',#11445);+#11445=AXIS2_PLACEMENT_3D('',#7574,#13,#50);+#11446=ADVANCED_FACE('',(#11447),#11454,.T.);+#11447=FACE_BOUND('',#11448,.F.);+#11448=EDGE_LOOP('',(#11449,#7637,#11452,#11453));+#11449=ORIENTED_EDGE('',*,*,#11450,.T.);+#11450=EDGE_CURVE('',#7568,#7634,#11451,.T.);+#11451=LINE('',#7569,#751);+#11452=ORIENTED_EDGE('',*,*,#11440,.F.);+#11453=ORIENTED_EDGE('',*,*,#7572,.F.);+#11454=CYLINDRICAL_SURFACE('',#11455,0.2);+#11455=AXIS2_PLACEMENT_3D('',#7577,#270,#5865);+#11456=ADVANCED_FACE('',(#11457),#11464,.F.);+#11457=FACE_BOUND('',#11458,.F.);+#11458=EDGE_LOOP('',(#11459,#7632,#11462,#11463));+#11459=ORIENTED_EDGE('',*,*,#11460,.T.);+#11460=EDGE_CURVE('',#7561,#7627,#11461,.T.);+#11461=LINE('',#7562,#751);+#11462=ORIENTED_EDGE('',*,*,#11450,.F.);+#11463=ORIENTED_EDGE('',*,*,#7567,.F.);+#11464=PLANE('',#11465);+#11465=AXIS2_PLACEMENT_3D('',#7562,#10173,#5857);+#11466=ADVANCED_FACE('',(#11467),#11472,.F.);+#11467=FACE_BOUND('',#11468,.F.);+#11468=EDGE_LOOP('',(#11469,#7625,#11470,#11471));+#11469=ORIENTED_EDGE('',*,*,#10296,.T.);+#11470=ORIENTED_EDGE('',*,*,#11460,.F.);+#11471=ORIENTED_EDGE('',*,*,#7560,.F.);+#11472=CYLINDRICAL_SURFACE('',#7564,0.1);+#11473=ADVANCED_FACE('',(#11474),#11481,.F.);+#11474=FACE_BOUND('',#11475,.F.);+#11475=EDGE_LOOP('',(#11476,#7812,#11479,#11480));+#11476=ORIENTED_EDGE('',*,*,#11477,.T.);+#11477=EDGE_CURVE('',#7742,#7808,#11478,.T.);+#11478=LINE('',#7743,#751);+#11479=ORIENTED_EDGE('',*,*,#7828,.F.);+#11480=ORIENTED_EDGE('',*,*,#7747,.F.);+#11481=PLANE('',#11482);+#11482=AXIS2_PLACEMENT_3D('',#7743,#10113,#5894);+#11483=ADVANCED_FACE('',(#11484),#11491,.F.);+#11484=FACE_BOUND('',#11485,.F.);+#11485=EDGE_LOOP('',(#11486,#7806,#11489,#11490));+#11486=ORIENTED_EDGE('',*,*,#11487,.T.);+#11487=EDGE_CURVE('',#7737,#7803,#11488,.T.);+#11488=LINE('',#7738,#751);+#11489=ORIENTED_EDGE('',*,*,#11477,.F.);+#11490=ORIENTED_EDGE('',*,*,#7741,.F.);+#11491=CYLINDRICAL_SURFACE('',#7745,1.E-01);+#11492=ADVANCED_FACE('',(#11493),#11500,.F.);+#11493=FACE_BOUND('',#11494,.F.);+#11494=EDGE_LOOP('',(#11495,#7801,#11498,#11499));+#11495=ORIENTED_EDGE('',*,*,#11496,.T.);+#11496=EDGE_CURVE('',#7732,#7798,#11497,.T.);+#11497=LINE('',#7733,#751);+#11498=ORIENTED_EDGE('',*,*,#11487,.F.);+#11499=ORIENTED_EDGE('',*,*,#7736,.F.);+#11500=PLANE('',#11501);+#11501=AXIS2_PLACEMENT_3D('',#7733,#312,#760);+#11502=ADVANCED_FACE('',(#11503),#11510,.F.);+#11503=FACE_BOUND('',#11504,.F.);+#11504=EDGE_LOOP('',(#11505,#7796,#11508,#11509));+#11505=ORIENTED_EDGE('',*,*,#11506,.T.);+#11506=EDGE_CURVE('',#7727,#7793,#11507,.T.);+#11507=LINE('',#7728,#751);+#11508=ORIENTED_EDGE('',*,*,#11496,.F.);+#11509=ORIENTED_EDGE('',*,*,#7731,.F.);+#11510=PLANE('',#11511);+#11511=AXIS2_PLACEMENT_3D('',#7728,#760,#13);+#11512=ADVANCED_FACE('',(#11513),#11520,.F.);+#11513=FACE_BOUND('',#11514,.F.);+#11514=EDGE_LOOP('',(#11515,#7791,#11518,#11519));+#11515=ORIENTED_EDGE('',*,*,#11516,.T.);+#11516=EDGE_CURVE('',#7720,#7786,#11517,.T.);+#11517=LINE('',#7721,#751);+#11518=ORIENTED_EDGE('',*,*,#11506,.F.);+#11519=ORIENTED_EDGE('',*,*,#7726,.F.);+#11520=PLANE('',#11521);+#11521=AXIS2_PLACEMENT_3D('',#7721,#13,#50);+#11522=ADVANCED_FACE('',(#11523),#11530,.T.);+#11523=FACE_BOUND('',#11524,.F.);+#11524=EDGE_LOOP('',(#11525,#7784,#11528,#11529));+#11525=ORIENTED_EDGE('',*,*,#11526,.T.);+#11526=EDGE_CURVE('',#7715,#7781,#11527,.T.);+#11527=LINE('',#7716,#751);+#11528=ORIENTED_EDGE('',*,*,#11516,.F.);+#11529=ORIENTED_EDGE('',*,*,#7719,.F.);+#11530=CYLINDRICAL_SURFACE('',#11531,0.2);+#11531=AXIS2_PLACEMENT_3D('',#7724,#270,#5865);+#11532=ADVANCED_FACE('',(#11533),#11540,.F.);+#11533=FACE_BOUND('',#11534,.F.);+#11534=EDGE_LOOP('',(#11535,#7779,#11538,#11539));+#11535=ORIENTED_EDGE('',*,*,#11536,.T.);+#11536=EDGE_CURVE('',#7708,#7774,#11537,.T.);+#11537=LINE('',#7709,#751);+#11538=ORIENTED_EDGE('',*,*,#11526,.F.);+#11539=ORIENTED_EDGE('',*,*,#7714,.F.);+#11540=PLANE('',#11541);+#11541=AXIS2_PLACEMENT_3D('',#7709,#10173,#5857);+#11542=ADVANCED_FACE('',(#11543),#11548,.F.);+#11543=FACE_BOUND('',#11544,.F.);+#11544=EDGE_LOOP('',(#11545,#7772,#11546,#11547));+#11545=ORIENTED_EDGE('',*,*,#10306,.T.);+#11546=ORIENTED_EDGE('',*,*,#11536,.F.);+#11547=ORIENTED_EDGE('',*,*,#7707,.F.);+#11548=CYLINDRICAL_SURFACE('',#7711,0.1);+#11549=ADVANCED_FACE('',(#11550),#11557,.F.);+#11550=FACE_BOUND('',#11551,.F.);+#11551=EDGE_LOOP('',(#11552,#7959,#11555,#11556));+#11552=ORIENTED_EDGE('',*,*,#11553,.T.);+#11553=EDGE_CURVE('',#7889,#7955,#11554,.T.);+#11554=LINE('',#7890,#751);+#11555=ORIENTED_EDGE('',*,*,#7975,.F.);+#11556=ORIENTED_EDGE('',*,*,#7894,.F.);+#11557=PLANE('',#11558);+#11558=AXIS2_PLACEMENT_3D('',#7890,#10113,#5894);+#11559=ADVANCED_FACE('',(#11560),#11567,.F.);+#11560=FACE_BOUND('',#11561,.F.);+#11561=EDGE_LOOP('',(#11562,#7953,#11565,#11566));+#11562=ORIENTED_EDGE('',*,*,#11563,.T.);+#11563=EDGE_CURVE('',#7884,#7950,#11564,.T.);+#11564=LINE('',#7885,#751);+#11565=ORIENTED_EDGE('',*,*,#11553,.F.);+#11566=ORIENTED_EDGE('',*,*,#7888,.F.);+#11567=CYLINDRICAL_SURFACE('',#7892,1.E-01);+#11568=ADVANCED_FACE('',(#11569),#11576,.F.);+#11569=FACE_BOUND('',#11570,.F.);+#11570=EDGE_LOOP('',(#11571,#7948,#11574,#11575));+#11571=ORIENTED_EDGE('',*,*,#11572,.T.);+#11572=EDGE_CURVE('',#7879,#7945,#11573,.T.);+#11573=LINE('',#7880,#751);+#11574=ORIENTED_EDGE('',*,*,#11563,.F.);+#11575=ORIENTED_EDGE('',*,*,#7883,.F.);+#11576=PLANE('',#11577);+#11577=AXIS2_PLACEMENT_3D('',#7880,#312,#760);+#11578=ADVANCED_FACE('',(#11579),#11586,.F.);+#11579=FACE_BOUND('',#11580,.F.);+#11580=EDGE_LOOP('',(#11581,#7943,#11584,#11585));+#11581=ORIENTED_EDGE('',*,*,#11582,.T.);+#11582=EDGE_CURVE('',#7874,#7940,#11583,.T.);+#11583=LINE('',#7875,#751);+#11584=ORIENTED_EDGE('',*,*,#11572,.F.);+#11585=ORIENTED_EDGE('',*,*,#7878,.F.);+#11586=PLANE('',#11587);+#11587=AXIS2_PLACEMENT_3D('',#7875,#760,#13);+#11588=ADVANCED_FACE('',(#11589),#11596,.F.);+#11589=FACE_BOUND('',#11590,.F.);+#11590=EDGE_LOOP('',(#11591,#7938,#11594,#11595));+#11591=ORIENTED_EDGE('',*,*,#11592,.T.);+#11592=EDGE_CURVE('',#7867,#7933,#11593,.T.);+#11593=LINE('',#7868,#751);+#11594=ORIENTED_EDGE('',*,*,#11582,.F.);+#11595=ORIENTED_EDGE('',*,*,#7873,.F.);+#11596=PLANE('',#11597);+#11597=AXIS2_PLACEMENT_3D('',#7868,#13,#50);+#11598=ADVANCED_FACE('',(#11599),#11606,.T.);+#11599=FACE_BOUND('',#11600,.F.);+#11600=EDGE_LOOP('',(#11601,#7931,#11604,#11605));+#11601=ORIENTED_EDGE('',*,*,#11602,.T.);+#11602=EDGE_CURVE('',#7862,#7928,#11603,.T.);+#11603=LINE('',#7863,#751);+#11604=ORIENTED_EDGE('',*,*,#11592,.F.);+#11605=ORIENTED_EDGE('',*,*,#7866,.F.);+#11606=CYLINDRICAL_SURFACE('',#11607,0.2);+#11607=AXIS2_PLACEMENT_3D('',#7871,#270,#5865);+#11608=ADVANCED_FACE('',(#11609),#11616,.F.);+#11609=FACE_BOUND('',#11610,.F.);+#11610=EDGE_LOOP('',(#11611,#7926,#11614,#11615));+#11611=ORIENTED_EDGE('',*,*,#11612,.T.);+#11612=EDGE_CURVE('',#7855,#7921,#11613,.T.);+#11613=LINE('',#7856,#751);+#11614=ORIENTED_EDGE('',*,*,#11602,.F.);+#11615=ORIENTED_EDGE('',*,*,#7861,.F.);+#11616=PLANE('',#11617);+#11617=AXIS2_PLACEMENT_3D('',#7856,#10173,#5857);+#11618=ADVANCED_FACE('',(#11619),#11624,.F.);+#11619=FACE_BOUND('',#11620,.F.);+#11620=EDGE_LOOP('',(#11621,#7919,#11622,#11623));+#11621=ORIENTED_EDGE('',*,*,#10316,.T.);+#11622=ORIENTED_EDGE('',*,*,#11612,.F.);+#11623=ORIENTED_EDGE('',*,*,#7854,.F.);+#11624=CYLINDRICAL_SURFACE('',#7858,0.1);+#11625=ADVANCED_FACE('',(#11626),#11696,.F.);+#11626=FACE_BOUND('',#11627,.F.);+#11627=EDGE_LOOP('',(#11628,#11629,#11637,#11646,#11653,#11661,#11666,#11671,#11676,#11683,#11690,#11695));+#11628=ORIENTED_EDGE('',*,*,#8019,.F.);+#11629=ORIENTED_EDGE('',*,*,#11630,.T.);+#11630=EDGE_CURVE('',#8015,#11631,#11633,.T.);+#11631=VERTEX_POINT('',#11632);+#11632=CARTESIAN_POINT('',(6.22,-7.2,0.75));+#11633=LINE('',#11634,#11635);+#11634=CARTESIAN_POINT('',(6.22,-6.85,0.75));+#11635=VECTOR('',#11636,1.);+#11636=DIRECTION('',(-1.110223024625E-16,-1.,0.));+#11637=ORIENTED_EDGE('',*,*,#11638,.T.);+#11638=EDGE_CURVE('',#11631,#11639,#11641,.T.);+#11639=VERTEX_POINT('',#11640);+#11640=CARTESIAN_POINT('',(6.22,-7.298480775301,0.667364817767));+#11641=CIRCLE('',#11642,0.1);+#11642=AXIS2_PLACEMENT_3D('',#11643,#11644,#11645);+#11643=CARTESIAN_POINT('',(6.22,-7.2,0.65));+#11644=DIRECTION('',(1.,-1.110223024625E-16,0.));+#11645=DIRECTION('',(9.860761315263E-31,8.881784197001E-15,1.));+#11646=ORIENTED_EDGE('',*,*,#11647,.T.);+#11647=EDGE_CURVE('',#11639,#11648,#11650,.T.);+#11648=VERTEX_POINT('',#11649);+#11649=CARTESIAN_POINT('',(6.22,-7.382385590716,0.165270364467));+#11650=LINE('',#11640,#11651);+#11651=VECTOR('',#11652,1.);+#11652=DIRECTION('',(-1.829914699438E-17,-0.16482406317,-0.986322983713));+#11653=ORIENTED_EDGE('',*,*,#11654,.T.);+#11654=EDGE_CURVE('',#11648,#11655,#11657,.T.);+#11655=VERTEX_POINT('',#11656);+#11656=CARTESIAN_POINT('',(6.22,-7.579347141319,1.387778780781E-16));+#11657=CIRCLE('',#11658,0.2);+#11658=AXIS2_PLACEMENT_3D('',#11659,#7993,#11660);+#11659=CARTESIAN_POINT('',(6.22,-7.579347141319,0.2));+#11660=DIRECTION('',(1.093356242224E-16,0.984807753012,-0.173648177667));+#11661=ORIENTED_EDGE('',*,*,#11662,.T.);+#11662=EDGE_CURVE('',#11655,#11663,#11665,.T.);+#11663=VERTEX_POINT('',#11664);+#11664=CARTESIAN_POINT('',(6.22,-8.,1.387778780781E-16));+#11665=LINE('',#11656,#11635);+#11666=ORIENTED_EDGE('',*,*,#11667,.T.);+#11667=EDGE_CURVE('',#11663,#11668,#11670,.T.);+#11668=VERTEX_POINT('',#11669);+#11669=CARTESIAN_POINT('',(6.22,-8.,0.1));+#11670=LINE('',#11664,#1074);+#11671=ORIENTED_EDGE('',*,*,#11672,.T.);+#11672=EDGE_CURVE('',#11668,#11673,#11675,.T.);+#11673=VERTEX_POINT('',#11674);+#11674=CARTESIAN_POINT('',(6.22,-7.579347141319,0.1));+#11675=LINE('',#11669,#3784);+#11676=ORIENTED_EDGE('',*,*,#11677,.T.);+#11677=EDGE_CURVE('',#11673,#11678,#11680,.T.);+#11678=VERTEX_POINT('',#11679);+#11679=CARTESIAN_POINT('',(6.22,-7.480866366018,0.182635182233));+#11680=CIRCLE('',#11681,1.E-01);+#11681=AXIS2_PLACEMENT_3D('',#11659,#11644,#11682);+#11682=DIRECTION('',(-9.860761315263E-31,-8.881784197001E-15,-1.));+#11683=ORIENTED_EDGE('',*,*,#11684,.T.);+#11684=EDGE_CURVE('',#11678,#11685,#11687,.T.);+#11685=VERTEX_POINT('',#11686);+#11686=CARTESIAN_POINT('',(6.22,-7.396961550602,0.684729635533));+#11687=LINE('',#11679,#11688);+#11688=VECTOR('',#11689,1.);+#11689=DIRECTION('',(1.829914699438E-17,0.16482406317,0.986322983713));+#11690=ORIENTED_EDGE('',*,*,#11691,.T.);+#11691=EDGE_CURVE('',#11685,#7986,#11692,.T.);+#11692=CIRCLE('',#11693,0.2);+#11693=AXIS2_PLACEMENT_3D('',#11643,#7993,#11694);+#11694=DIRECTION('',(-1.093356242224E-16,-0.984807753012,0.173648177667));+#11695=ORIENTED_EDGE('',*,*,#7985,.T.);+#11696=PLANE('',#11697);+#11697=AXIS2_PLACEMENT_3D('',#11698,#7993,#13);+#11698=CARTESIAN_POINT('',(6.22,-7.414276639233,0.410238158856));+#11699=ADVANCED_FACE('',(#11700),#11763,.T.);+#11700=FACE_BOUND('',#11701,.T.);+#11701=EDGE_LOOP('',(#11702,#11708,#11714,#11721,#11726,#11733,#11738,#11743,#11748,#11754,#11759,#7994));+#11702=ORIENTED_EDGE('',*,*,#11703,.F.);+#11703=EDGE_CURVE('',#11704,#7996,#11706,.T.);+#11704=VERTEX_POINT('',#11705);+#11705=CARTESIAN_POINT('',(5.78,-7.,0.75));+#11706=LINE('',#11707,#1074);+#11707=CARTESIAN_POINT('',(5.78,-7.,0.630119079428));+#11708=ORIENTED_EDGE('',*,*,#11709,.T.);+#11709=EDGE_CURVE('',#11704,#11710,#11712,.T.);+#11710=VERTEX_POINT('',#11711);+#11711=CARTESIAN_POINT('',(5.78,-7.2,0.75));+#11712=LINE('',#11713,#11635);+#11713=CARTESIAN_POINT('',(5.78,-6.85,0.75));+#11714=ORIENTED_EDGE('',*,*,#11715,.T.);+#11715=EDGE_CURVE('',#11710,#11716,#11718,.T.);+#11716=VERTEX_POINT('',#11717);+#11717=CARTESIAN_POINT('',(5.78,-7.298480775301,0.667364817767));+#11718=CIRCLE('',#11719,0.1);+#11719=AXIS2_PLACEMENT_3D('',#11720,#11644,#11645);+#11720=CARTESIAN_POINT('',(5.78,-7.2,0.65));+#11721=ORIENTED_EDGE('',*,*,#11722,.T.);+#11722=EDGE_CURVE('',#11716,#11723,#11725,.T.);+#11723=VERTEX_POINT('',#11724);+#11724=CARTESIAN_POINT('',(5.78,-7.382385590716,0.165270364467));+#11725=LINE('',#11717,#11651);+#11726=ORIENTED_EDGE('',*,*,#11727,.T.);+#11727=EDGE_CURVE('',#11723,#11728,#11730,.T.);+#11728=VERTEX_POINT('',#11729);+#11729=CARTESIAN_POINT('',(5.78,-7.579347141319,1.387778780781E-16));+#11730=CIRCLE('',#11731,0.2);+#11731=AXIS2_PLACEMENT_3D('',#11732,#7993,#11660);+#11732=CARTESIAN_POINT('',(5.78,-7.579347141319,0.2));+#11733=ORIENTED_EDGE('',*,*,#11734,.T.);+#11734=EDGE_CURVE('',#11728,#11735,#11737,.T.);+#11735=VERTEX_POINT('',#11736);+#11736=CARTESIAN_POINT('',(5.78,-8.,1.387778780781E-16));+#11737=LINE('',#11729,#11635);+#11738=ORIENTED_EDGE('',*,*,#11739,.T.);+#11739=EDGE_CURVE('',#11735,#11740,#11742,.T.);+#11740=VERTEX_POINT('',#11741);+#11741=CARTESIAN_POINT('',(5.78,-8.,0.1));+#11742=LINE('',#11736,#1074);+#11743=ORIENTED_EDGE('',*,*,#11744,.T.);+#11744=EDGE_CURVE('',#11740,#11745,#11747,.T.);+#11745=VERTEX_POINT('',#11746);+#11746=CARTESIAN_POINT('',(5.78,-7.579347141319,0.1));+#11747=LINE('',#11741,#3784);+#11748=ORIENTED_EDGE('',*,*,#11749,.T.);+#11749=EDGE_CURVE('',#11745,#11750,#11752,.T.);+#11750=VERTEX_POINT('',#11751);+#11751=CARTESIAN_POINT('',(5.78,-7.480866366018,0.182635182233));+#11752=CIRCLE('',#11753,1.E-01);+#11753=AXIS2_PLACEMENT_3D('',#11732,#11644,#11682);+#11754=ORIENTED_EDGE('',*,*,#11755,.T.);+#11755=EDGE_CURVE('',#11750,#11756,#11758,.T.);+#11756=VERTEX_POINT('',#11757);+#11757=CARTESIAN_POINT('',(5.78,-7.396961550602,0.684729635533));+#11758=LINE('',#11751,#11688);+#11759=ORIENTED_EDGE('',*,*,#11760,.T.);+#11760=EDGE_CURVE('',#11756,#7989,#11761,.T.);+#11761=CIRCLE('',#11762,0.2);+#11762=AXIS2_PLACEMENT_3D('',#11720,#7993,#11694);+#11763=PLANE('',#11764);+#11764=AXIS2_PLACEMENT_3D('',#11765,#7993,#13);+#11765=CARTESIAN_POINT('',(5.78,-7.414276639233,0.410238158856));+#11766=ADVANCED_FACE('',(#11767),#11774,.T.);+#11767=FACE_BOUND('',#11768,.F.);+#11768=EDGE_LOOP('',(#11769,#11759,#11772,#11773));+#11769=ORIENTED_EDGE('',*,*,#11770,.T.);+#11770=EDGE_CURVE('',#11685,#11756,#11771,.T.);+#11771=LINE('',#11686,#7992);+#11772=ORIENTED_EDGE('',*,*,#7988,.F.);+#11773=ORIENTED_EDGE('',*,*,#11691,.F.);+#11774=CYLINDRICAL_SURFACE('',#11775,0.2);+#11775=AXIS2_PLACEMENT_3D('',#11643,#11644,#11694);+#11776=ADVANCED_FACE('',(#11777),#11879,.F.);+#11777=FACE_BOUND('',#11778,.F.);+#11778=EDGE_LOOP('',(#8052,#11779,#11780,#11781,#11785,#11789,#11793,#11797,#11801,#11805,#11809,#11813,#11817,#11821,#11825,#11829,#11833,#11837,#11841,#11845,#11849,#11853,#11857,#11861,#11865,#11869,#11873,#11875,#11877,#11878));+#11779=ORIENTED_EDGE('',*,*,#8578,.T.);+#11780=ORIENTED_EDGE('',*,*,#8602,.F.);+#11781=ORIENTED_EDGE('',*,*,#11782,.F.);+#11782=EDGE_CURVE('',#11783,#8597,#8017,.T.);+#11783=VERTEX_POINT('',#11784);+#11784=CARTESIAN_POINT('',(-5.78,-7.,0.75));+#11785=ORIENTED_EDGE('',*,*,#11786,.F.);+#11786=EDGE_CURVE('',#11787,#11783,#8017,.T.);+#11787=VERTEX_POINT('',#11788);+#11788=CARTESIAN_POINT('',(-5.22,-7.,0.75));+#11789=ORIENTED_EDGE('',*,*,#11790,.F.);+#11790=EDGE_CURVE('',#11791,#11787,#8017,.T.);+#11791=VERTEX_POINT('',#11792);+#11792=CARTESIAN_POINT('',(-4.78,-7.,0.75));+#11793=ORIENTED_EDGE('',*,*,#11794,.F.);+#11794=EDGE_CURVE('',#11795,#11791,#8017,.T.);+#11795=VERTEX_POINT('',#11796);+#11796=CARTESIAN_POINT('',(-4.22,-7.,0.75));+#11797=ORIENTED_EDGE('',*,*,#11798,.F.);+#11798=EDGE_CURVE('',#11799,#11795,#8017,.T.);+#11799=VERTEX_POINT('',#11800);+#11800=CARTESIAN_POINT('',(-3.78,-7.,0.75));+#11801=ORIENTED_EDGE('',*,*,#11802,.F.);+#11802=EDGE_CURVE('',#11803,#11799,#8017,.T.);+#11803=VERTEX_POINT('',#11804);+#11804=CARTESIAN_POINT('',(-3.22,-7.,0.75));+#11805=ORIENTED_EDGE('',*,*,#11806,.F.);+#11806=EDGE_CURVE('',#11807,#11803,#8017,.T.);+#11807=VERTEX_POINT('',#11808);+#11808=CARTESIAN_POINT('',(-2.78,-7.,0.75));+#11809=ORIENTED_EDGE('',*,*,#11810,.F.);+#11810=EDGE_CURVE('',#11811,#11807,#8017,.T.);+#11811=VERTEX_POINT('',#11812);+#11812=CARTESIAN_POINT('',(-2.22,-7.,0.75));+#11813=ORIENTED_EDGE('',*,*,#11814,.F.);+#11814=EDGE_CURVE('',#11815,#11811,#8017,.T.);+#11815=VERTEX_POINT('',#11816);+#11816=CARTESIAN_POINT('',(-1.78,-7.,0.75));+#11817=ORIENTED_EDGE('',*,*,#11818,.F.);+#11818=EDGE_CURVE('',#11819,#11815,#8017,.T.);+#11819=VERTEX_POINT('',#11820);+#11820=CARTESIAN_POINT('',(-1.22,-7.,0.75));+#11821=ORIENTED_EDGE('',*,*,#11822,.F.);+#11822=EDGE_CURVE('',#11823,#11819,#8017,.T.);+#11823=VERTEX_POINT('',#11824);+#11824=CARTESIAN_POINT('',(-0.78,-7.,0.75));+#11825=ORIENTED_EDGE('',*,*,#11826,.F.);+#11826=EDGE_CURVE('',#11827,#11823,#8017,.T.);+#11827=VERTEX_POINT('',#11828);+#11828=CARTESIAN_POINT('',(-0.22,-7.,0.75));+#11829=ORIENTED_EDGE('',*,*,#11830,.F.);+#11830=EDGE_CURVE('',#11831,#11827,#8017,.T.);+#11831=VERTEX_POINT('',#11832);+#11832=CARTESIAN_POINT('',(0.22,-7.,0.75));+#11833=ORIENTED_EDGE('',*,*,#11834,.F.);+#11834=EDGE_CURVE('',#11835,#11831,#8017,.T.);+#11835=VERTEX_POINT('',#11836);+#11836=CARTESIAN_POINT('',(0.78,-7.,0.75));+#11837=ORIENTED_EDGE('',*,*,#11838,.F.);+#11838=EDGE_CURVE('',#11839,#11835,#8017,.T.);+#11839=VERTEX_POINT('',#11840);+#11840=CARTESIAN_POINT('',(1.22,-7.,0.75));+#11841=ORIENTED_EDGE('',*,*,#11842,.F.);+#11842=EDGE_CURVE('',#11843,#11839,#8017,.T.);+#11843=VERTEX_POINT('',#11844);+#11844=CARTESIAN_POINT('',(1.78,-7.,0.75));+#11845=ORIENTED_EDGE('',*,*,#11846,.F.);+#11846=EDGE_CURVE('',#11847,#11843,#8017,.T.);+#11847=VERTEX_POINT('',#11848);+#11848=CARTESIAN_POINT('',(2.22,-7.,0.75));+#11849=ORIENTED_EDGE('',*,*,#11850,.F.);+#11850=EDGE_CURVE('',#11851,#11847,#8017,.T.);+#11851=VERTEX_POINT('',#11852);+#11852=CARTESIAN_POINT('',(2.78,-7.,0.75));+#11853=ORIENTED_EDGE('',*,*,#11854,.F.);+#11854=EDGE_CURVE('',#11855,#11851,#8017,.T.);+#11855=VERTEX_POINT('',#11856);+#11856=CARTESIAN_POINT('',(3.22,-7.,0.75));+#11857=ORIENTED_EDGE('',*,*,#11858,.F.);+#11858=EDGE_CURVE('',#11859,#11855,#8017,.T.);+#11859=VERTEX_POINT('',#11860);+#11860=CARTESIAN_POINT('',(3.78,-7.,0.75));+#11861=ORIENTED_EDGE('',*,*,#11862,.F.);+#11862=EDGE_CURVE('',#11863,#11859,#8017,.T.);+#11863=VERTEX_POINT('',#11864);+#11864=CARTESIAN_POINT('',(4.22,-7.,0.75));+#11865=ORIENTED_EDGE('',*,*,#11866,.F.);+#11866=EDGE_CURVE('',#11867,#11863,#8017,.T.);+#11867=VERTEX_POINT('',#11868);+#11868=CARTESIAN_POINT('',(4.78,-7.,0.75));+#11869=ORIENTED_EDGE('',*,*,#11870,.F.);+#11870=EDGE_CURVE('',#11871,#11867,#8017,.T.);+#11871=VERTEX_POINT('',#11872);+#11872=CARTESIAN_POINT('',(5.22,-7.,0.75));+#11873=ORIENTED_EDGE('',*,*,#11874,.F.);+#11874=EDGE_CURVE('',#11704,#11871,#8017,.T.);+#11875=ORIENTED_EDGE('',*,*,#11876,.F.);+#11876=EDGE_CURVE('',#8015,#11704,#8017,.T.);+#11877=ORIENTED_EDGE('',*,*,#8014,.F.);+#11878=ORIENTED_EDGE('',*,*,#10195,.F.);+#11879=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#8050,#8011),(#8055,#8575)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,13.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#11880=ADVANCED_FACE('',(#11881),#11888,.F.);+#11881=FACE_BOUND('',#11882,.F.);+#11882=EDGE_LOOP('',(#11883,#8688,#11884,#11887));+#11883=ORIENTED_EDGE('',*,*,#8180,.T.);+#11884=ORIENTED_EDGE('',*,*,#11885,.F.);+#11885=EDGE_CURVE('',#8634,#8690,#11886,.T.);+#11886=LINE('',#8635,#1097);+#11887=ORIENTED_EDGE('',*,*,#8633,.F.);+#11888=CYLINDRICAL_SURFACE('',#8637,0.1);+#11889=ADVANCED_FACE('',(#11890),#11897,.F.);+#11890=FACE_BOUND('',#11891,.F.);+#11891=EDGE_LOOP('',(#11892,#8811,#11893,#11896));+#11892=ORIENTED_EDGE('',*,*,#8214,.T.);+#11893=ORIENTED_EDGE('',*,*,#11894,.F.);+#11894=EDGE_CURVE('',#8757,#8813,#11895,.T.);+#11895=LINE('',#8758,#1097);+#11896=ORIENTED_EDGE('',*,*,#8756,.F.);+#11897=CYLINDRICAL_SURFACE('',#8760,0.1);+#11898=ADVANCED_FACE('',(#11899),#11906,.F.);+#11899=FACE_BOUND('',#11900,.F.);+#11900=EDGE_LOOP('',(#11901,#8934,#11902,#11905));+#11901=ORIENTED_EDGE('',*,*,#8248,.T.);+#11902=ORIENTED_EDGE('',*,*,#11903,.F.);+#11903=EDGE_CURVE('',#8880,#8936,#11904,.T.);+#11904=LINE('',#8881,#1097);+#11905=ORIENTED_EDGE('',*,*,#8879,.F.);+#11906=CYLINDRICAL_SURFACE('',#8883,0.1);+#11907=ADVANCED_FACE('',(#11908),#11915,.F.);+#11908=FACE_BOUND('',#11909,.F.);+#11909=EDGE_LOOP('',(#11910,#9057,#11911,#11914));+#11910=ORIENTED_EDGE('',*,*,#8282,.T.);+#11911=ORIENTED_EDGE('',*,*,#11912,.F.);+#11912=EDGE_CURVE('',#9003,#9059,#11913,.T.);+#11913=LINE('',#9004,#1097);+#11914=ORIENTED_EDGE('',*,*,#9002,.F.);+#11915=CYLINDRICAL_SURFACE('',#9006,0.1);+#11916=ADVANCED_FACE('',(#11917),#11924,.F.);+#11917=FACE_BOUND('',#11918,.F.);+#11918=EDGE_LOOP('',(#11919,#9180,#11920,#11923));+#11919=ORIENTED_EDGE('',*,*,#8316,.T.);+#11920=ORIENTED_EDGE('',*,*,#11921,.F.);+#11921=EDGE_CURVE('',#9126,#9182,#11922,.T.);+#11922=LINE('',#9127,#1097);+#11923=ORIENTED_EDGE('',*,*,#9125,.F.);+#11924=CYLINDRICAL_SURFACE('',#9129,0.1);+#11925=ADVANCED_FACE('',(#11926),#11933,.F.);+#11926=FACE_BOUND('',#11927,.F.);+#11927=EDGE_LOOP('',(#11928,#9303,#11929,#11932));+#11928=ORIENTED_EDGE('',*,*,#8350,.T.);+#11929=ORIENTED_EDGE('',*,*,#11930,.F.);+#11930=EDGE_CURVE('',#9249,#9305,#11931,.T.);+#11931=LINE('',#9250,#1097);+#11932=ORIENTED_EDGE('',*,*,#9248,.F.);+#11933=CYLINDRICAL_SURFACE('',#9252,0.1);+#11934=ADVANCED_FACE('',(#11935),#11942,.F.);+#11935=FACE_BOUND('',#11936,.F.);+#11936=EDGE_LOOP('',(#11937,#9426,#11938,#11941));+#11937=ORIENTED_EDGE('',*,*,#8384,.T.);+#11938=ORIENTED_EDGE('',*,*,#11939,.F.);+#11939=EDGE_CURVE('',#9372,#9428,#11940,.T.);+#11940=LINE('',#9373,#1097);+#11941=ORIENTED_EDGE('',*,*,#9371,.F.);+#11942=CYLINDRICAL_SURFACE('',#9375,0.1);+#11943=ADVANCED_FACE('',(#11944),#11951,.F.);+#11944=FACE_BOUND('',#11945,.F.);+#11945=EDGE_LOOP('',(#11946,#9549,#11947,#11950));+#11946=ORIENTED_EDGE('',*,*,#8418,.T.);+#11947=ORIENTED_EDGE('',*,*,#11948,.F.);+#11948=EDGE_CURVE('',#9495,#9551,#11949,.T.);+#11949=LINE('',#9496,#1097);+#11950=ORIENTED_EDGE('',*,*,#9494,.F.);+#11951=CYLINDRICAL_SURFACE('',#9498,0.1);+#11952=ADVANCED_FACE('',(#11953),#11960,.F.);+#11953=FACE_BOUND('',#11954,.F.);+#11954=EDGE_LOOP('',(#11955,#9672,#11956,#11959));+#11955=ORIENTED_EDGE('',*,*,#8452,.T.);+#11956=ORIENTED_EDGE('',*,*,#11957,.F.);+#11957=EDGE_CURVE('',#9618,#9674,#11958,.T.);+#11958=LINE('',#9619,#1097);+#11959=ORIENTED_EDGE('',*,*,#9617,.F.);+#11960=CYLINDRICAL_SURFACE('',#9621,0.1);+#11961=ADVANCED_FACE('',(#11962),#11969,.F.);+#11962=FACE_BOUND('',#11963,.F.);+#11963=EDGE_LOOP('',(#11964,#9795,#11965,#11968));+#11964=ORIENTED_EDGE('',*,*,#8486,.T.);+#11965=ORIENTED_EDGE('',*,*,#11966,.F.);+#11966=EDGE_CURVE('',#9741,#9797,#11967,.T.);+#11967=LINE('',#9742,#1097);+#11968=ORIENTED_EDGE('',*,*,#9740,.F.);+#11969=CYLINDRICAL_SURFACE('',#9744,0.1);+#11970=ADVANCED_FACE('',(#11971),#11978,.F.);+#11971=FACE_BOUND('',#11972,.F.);+#11972=EDGE_LOOP('',(#11973,#9918,#11974,#11977));+#11973=ORIENTED_EDGE('',*,*,#8520,.T.);+#11974=ORIENTED_EDGE('',*,*,#11975,.F.);+#11975=EDGE_CURVE('',#9864,#9920,#11976,.T.);+#11976=LINE('',#9865,#1097);+#11977=ORIENTED_EDGE('',*,*,#9863,.F.);+#11978=CYLINDRICAL_SURFACE('',#9867,0.1);+#11979=ADVANCED_FACE('',(#11980),#11987,.F.);+#11980=FACE_BOUND('',#11981,.F.);+#11981=EDGE_LOOP('',(#11982,#10041,#11983,#11986));+#11982=ORIENTED_EDGE('',*,*,#8554,.T.);+#11983=ORIENTED_EDGE('',*,*,#11984,.F.);+#11984=EDGE_CURVE('',#9987,#10043,#11985,.T.);+#11985=LINE('',#9988,#1097);+#11986=ORIENTED_EDGE('',*,*,#9986,.F.);+#11987=CYLINDRICAL_SURFACE('',#9990,0.1);+#11988=ADVANCED_FACE('',(#11989),#12046,.T.);+#11989=FACE_BOUND('',#11990,.T.);+#11990=EDGE_LOOP('',(#8595,#11991,#11997,#12004,#12009,#12016,#12021,#12026,#12031,#12037,#12042,#8619));+#11991=ORIENTED_EDGE('',*,*,#11992,.T.);+#11992=EDGE_CURVE('',#8597,#11993,#11995,.T.);+#11993=VERTEX_POINT('',#11994);+#11994=CARTESIAN_POINT('',(-6.22,-7.2,0.75));+#11995=LINE('',#11996,#11635);+#11996=CARTESIAN_POINT('',(-6.22,-6.85,0.75));+#11997=ORIENTED_EDGE('',*,*,#11998,.T.);+#11998=EDGE_CURVE('',#11993,#11999,#12001,.T.);+#11999=VERTEX_POINT('',#12000);+#12000=CARTESIAN_POINT('',(-6.22,-7.298480775301,0.667364817767));+#12001=CIRCLE('',#12002,0.1);+#12002=AXIS2_PLACEMENT_3D('',#12003,#11644,#11645);+#12003=CARTESIAN_POINT('',(-6.22,-7.2,0.65));+#12004=ORIENTED_EDGE('',*,*,#12005,.T.);+#12005=EDGE_CURVE('',#11999,#12006,#12008,.T.);+#12006=VERTEX_POINT('',#12007);+#12007=CARTESIAN_POINT('',(-6.22,-7.382385590716,0.165270364467));+#12008=LINE('',#12000,#11651);+#12009=ORIENTED_EDGE('',*,*,#12010,.T.);+#12010=EDGE_CURVE('',#12006,#12011,#12013,.T.);+#12011=VERTEX_POINT('',#12012);+#12012=CARTESIAN_POINT('',(-6.22,-7.579347141319,1.387778780781E-16));+#12013=CIRCLE('',#12014,0.2);+#12014=AXIS2_PLACEMENT_3D('',#12015,#7993,#11660);+#12015=CARTESIAN_POINT('',(-6.22,-7.579347141319,0.2));+#12016=ORIENTED_EDGE('',*,*,#12017,.T.);+#12017=EDGE_CURVE('',#12011,#12018,#12020,.T.);+#12018=VERTEX_POINT('',#12019);+#12019=CARTESIAN_POINT('',(-6.22,-8.,1.387778780781E-16));+#12020=LINE('',#12012,#11635);+#12021=ORIENTED_EDGE('',*,*,#12022,.T.);+#12022=EDGE_CURVE('',#12018,#12023,#12025,.T.);+#12023=VERTEX_POINT('',#12024);+#12024=CARTESIAN_POINT('',(-6.22,-8.,0.1));+#12025=LINE('',#12019,#1074);+#12026=ORIENTED_EDGE('',*,*,#12027,.T.);+#12027=EDGE_CURVE('',#12023,#12028,#12030,.T.);+#12028=VERTEX_POINT('',#12029);+#12029=CARTESIAN_POINT('',(-6.22,-7.579347141319,0.1));+#12030=LINE('',#12024,#3784);+#12031=ORIENTED_EDGE('',*,*,#12032,.T.);+#12032=EDGE_CURVE('',#12028,#12033,#12035,.T.);+#12033=VERTEX_POINT('',#12034);+#12034=CARTESIAN_POINT('',(-6.22,-7.480866366018,0.182635182233));+#12035=CIRCLE('',#12036,1.E-01);+#12036=AXIS2_PLACEMENT_3D('',#12015,#11644,#11682);+#12037=ORIENTED_EDGE('',*,*,#12038,.T.);+#12038=EDGE_CURVE('',#12033,#12039,#12041,.T.);+#12039=VERTEX_POINT('',#12040);+#12040=CARTESIAN_POINT('',(-6.22,-7.396961550602,0.684729635533));+#12041=LINE('',#12034,#11688);+#12042=ORIENTED_EDGE('',*,*,#12043,.T.);+#12043=EDGE_CURVE('',#12039,#8617,#12044,.T.);+#12044=CIRCLE('',#12045,0.2);+#12045=AXIS2_PLACEMENT_3D('',#12003,#7993,#11694);+#12046=PLANE('',#12047);+#12047=AXIS2_PLACEMENT_3D('',#12048,#7993,#13);+#12048=CARTESIAN_POINT('',(-6.22,-7.414276639233,0.410238158856));+#12049=ADVANCED_FACE('',(#12050),#12112,.F.);+#12050=FACE_BOUND('',#12051,.F.);+#12051=EDGE_LOOP('',(#12052,#12056,#12062,#12069,#12074,#12081,#12086,#12091,#12096,#12102,#12107,#12111));+#12052=ORIENTED_EDGE('',*,*,#12053,.F.);+#12053=EDGE_CURVE('',#11783,#8612,#12054,.T.);+#12054=LINE('',#12055,#1074);+#12055=CARTESIAN_POINT('',(-5.78,-7.,0.630119079428));+#12056=ORIENTED_EDGE('',*,*,#12057,.T.);+#12057=EDGE_CURVE('',#11783,#12058,#12060,.T.);+#12058=VERTEX_POINT('',#12059);+#12059=CARTESIAN_POINT('',(-5.78,-7.2,0.75));+#12060=LINE('',#12061,#11635);+#12061=CARTESIAN_POINT('',(-5.78,-6.85,0.75));+#12062=ORIENTED_EDGE('',*,*,#12063,.T.);+#12063=EDGE_CURVE('',#12058,#12064,#12066,.T.);+#12064=VERTEX_POINT('',#12065);+#12065=CARTESIAN_POINT('',(-5.78,-7.298480775301,0.667364817767));+#12066=CIRCLE('',#12067,0.1);+#12067=AXIS2_PLACEMENT_3D('',#12068,#11644,#11645);+#12068=CARTESIAN_POINT('',(-5.78,-7.2,0.65));+#12069=ORIENTED_EDGE('',*,*,#12070,.T.);+#12070=EDGE_CURVE('',#12064,#12071,#12073,.T.);+#12071=VERTEX_POINT('',#12072);+#12072=CARTESIAN_POINT('',(-5.78,-7.382385590716,0.165270364467));+#12073=LINE('',#12065,#11651);+#12074=ORIENTED_EDGE('',*,*,#12075,.T.);+#12075=EDGE_CURVE('',#12071,#12076,#12078,.T.);+#12076=VERTEX_POINT('',#12077);+#12077=CARTESIAN_POINT('',(-5.78,-7.579347141319,1.387778780781E-16));+#12078=CIRCLE('',#12079,0.2);+#12079=AXIS2_PLACEMENT_3D('',#12080,#7993,#11660);+#12080=CARTESIAN_POINT('',(-5.78,-7.579347141319,0.2));+#12081=ORIENTED_EDGE('',*,*,#12082,.T.);+#12082=EDGE_CURVE('',#12076,#12083,#12085,.T.);+#12083=VERTEX_POINT('',#12084);+#12084=CARTESIAN_POINT('',(-5.78,-8.,1.387778780781E-16));+#12085=LINE('',#12077,#11635);+#12086=ORIENTED_EDGE('',*,*,#12087,.T.);+#12087=EDGE_CURVE('',#12083,#12088,#12090,.T.);+#12088=VERTEX_POINT('',#12089);+#12089=CARTESIAN_POINT('',(-5.78,-8.,0.1));+#12090=LINE('',#12084,#1074);+#12091=ORIENTED_EDGE('',*,*,#12092,.T.);+#12092=EDGE_CURVE('',#12088,#12093,#12095,.T.);+#12093=VERTEX_POINT('',#12094);+#12094=CARTESIAN_POINT('',(-5.78,-7.579347141319,0.1));+#12095=LINE('',#12089,#3784);+#12096=ORIENTED_EDGE('',*,*,#12097,.T.);+#12097=EDGE_CURVE('',#12093,#12098,#12100,.T.);+#12098=VERTEX_POINT('',#12099);+#12099=CARTESIAN_POINT('',(-5.78,-7.480866366018,0.182635182233));+#12100=CIRCLE('',#12101,1.E-01);+#12101=AXIS2_PLACEMENT_3D('',#12080,#11644,#11682);+#12102=ORIENTED_EDGE('',*,*,#12103,.T.);+#12103=EDGE_CURVE('',#12098,#12104,#12106,.T.);+#12104=VERTEX_POINT('',#12105);+#12105=CARTESIAN_POINT('',(-5.78,-7.396961550602,0.684729635533));+#12106=LINE('',#12099,#11688);+#12107=ORIENTED_EDGE('',*,*,#12108,.T.);+#12108=EDGE_CURVE('',#12104,#8610,#12109,.T.);+#12109=CIRCLE('',#12110,0.2);+#12110=AXIS2_PLACEMENT_3D('',#12068,#7993,#11694);+#12111=ORIENTED_EDGE('',*,*,#8609,.T.);+#12112=PLANE('',#12113);+#12113=AXIS2_PLACEMENT_3D('',#12114,#7993,#13);+#12114=CARTESIAN_POINT('',(-5.78,-7.414276639233,0.410238158856));+#12115=ADVANCED_FACE('',(#12116),#12123,.T.);+#12116=FACE_BOUND('',#12117,.F.);+#12117=EDGE_LOOP('',(#12118,#12042,#12121,#12122));+#12118=ORIENTED_EDGE('',*,*,#12119,.T.);+#12119=EDGE_CURVE('',#12104,#12039,#12120,.T.);+#12120=LINE('',#12105,#7992);+#12121=ORIENTED_EDGE('',*,*,#8616,.F.);+#12122=ORIENTED_EDGE('',*,*,#12108,.F.);+#12123=CYLINDRICAL_SURFACE('',#12124,0.2);+#12124=AXIS2_PLACEMENT_3D('',#12068,#11644,#11694);+#12125=ADVANCED_FACE('',(#12126),#12133,.F.);+#12126=FACE_BOUND('',#12127,.F.);+#12127=EDGE_LOOP('',(#12128,#8728,#12131,#12132));+#12128=ORIENTED_EDGE('',*,*,#12129,.T.);+#12129=EDGE_CURVE('',#8668,#8724,#12130,.T.);+#12130=LINE('',#8669,#1097);+#12131=ORIENTED_EDGE('',*,*,#8744,.F.);+#12132=ORIENTED_EDGE('',*,*,#8673,.F.);+#12133=PLANE('',#12134);+#12134=AXIS2_PLACEMENT_3D('',#8669,#8073,#3983);+#12135=ADVANCED_FACE('',(#12136),#12143,.F.);+#12136=FACE_BOUND('',#12137,.F.);+#12137=EDGE_LOOP('',(#12138,#8722,#12141,#12142));+#12138=ORIENTED_EDGE('',*,*,#12139,.T.);+#12139=EDGE_CURVE('',#8663,#8719,#12140,.T.);+#12140=LINE('',#8664,#1097);+#12141=ORIENTED_EDGE('',*,*,#12129,.F.);+#12142=ORIENTED_EDGE('',*,*,#8667,.F.);+#12143=CYLINDRICAL_SURFACE('',#8671,1.E-01);+#12144=ADVANCED_FACE('',(#12145),#12152,.F.);+#12145=FACE_BOUND('',#12146,.F.);+#12146=EDGE_LOOP('',(#12147,#8717,#12150,#12151));+#12147=ORIENTED_EDGE('',*,*,#12148,.T.);+#12148=EDGE_CURVE('',#8658,#8714,#12149,.T.);+#12149=LINE('',#8659,#1097);+#12150=ORIENTED_EDGE('',*,*,#12139,.F.);+#12151=ORIENTED_EDGE('',*,*,#8662,.F.);+#12152=PLANE('',#12153);+#12153=AXIS2_PLACEMENT_3D('',#8659,#312,#278);+#12154=ADVANCED_FACE('',(#12155),#12162,.F.);+#12155=FACE_BOUND('',#12156,.F.);+#12156=EDGE_LOOP('',(#12157,#8712,#12160,#12161));+#12157=ORIENTED_EDGE('',*,*,#12158,.T.);+#12158=EDGE_CURVE('',#8653,#8709,#12159,.T.);+#12159=LINE('',#8654,#1097);+#12160=ORIENTED_EDGE('',*,*,#12148,.F.);+#12161=ORIENTED_EDGE('',*,*,#8657,.F.);+#12162=PLANE('',#12163);+#12163=AXIS2_PLACEMENT_3D('',#8654,#278,#13);+#12164=ADVANCED_FACE('',(#12165),#12172,.F.);+#12165=FACE_BOUND('',#12166,.F.);+#12166=EDGE_LOOP('',(#12167,#8707,#12170,#12171));+#12167=ORIENTED_EDGE('',*,*,#12168,.T.);+#12168=EDGE_CURVE('',#8646,#8702,#12169,.T.);+#12169=LINE('',#8647,#1097);+#12170=ORIENTED_EDGE('',*,*,#12158,.F.);+#12171=ORIENTED_EDGE('',*,*,#8652,.F.);+#12172=PLANE('',#12173);+#12173=AXIS2_PLACEMENT_3D('',#8647,#13,#3929);+#12174=ADVANCED_FACE('',(#12175),#12182,.T.);+#12175=FACE_BOUND('',#12176,.F.);+#12176=EDGE_LOOP('',(#12177,#8700,#12180,#12181));+#12177=ORIENTED_EDGE('',*,*,#12178,.T.);+#12178=EDGE_CURVE('',#8641,#8697,#12179,.T.);+#12179=LINE('',#8642,#1097);+#12180=ORIENTED_EDGE('',*,*,#12168,.F.);+#12181=ORIENTED_EDGE('',*,*,#8645,.F.);+#12182=CYLINDRICAL_SURFACE('',#12183,0.2);+#12183=AXIS2_PLACEMENT_3D('',#8650,#3937,#3954);+#12184=ADVANCED_FACE('',(#12185),#12190,.F.);+#12185=FACE_BOUND('',#12186,.F.);+#12186=EDGE_LOOP('',(#12187,#8695,#12188,#12189));+#12187=ORIENTED_EDGE('',*,*,#11885,.T.);+#12188=ORIENTED_EDGE('',*,*,#12178,.F.);+#12189=ORIENTED_EDGE('',*,*,#8640,.F.);+#12190=PLANE('',#12191);+#12191=AXIS2_PLACEMENT_3D('',#8635,#8133,#3945);+#12192=ADVANCED_FACE('',(#12193),#12200,.F.);+#12193=FACE_BOUND('',#12194,.F.);+#12194=EDGE_LOOP('',(#12195,#8851,#12198,#12199));+#12195=ORIENTED_EDGE('',*,*,#12196,.T.);+#12196=EDGE_CURVE('',#8791,#8847,#12197,.T.);+#12197=LINE('',#8792,#1097);+#12198=ORIENTED_EDGE('',*,*,#8867,.F.);+#12199=ORIENTED_EDGE('',*,*,#8796,.F.);+#12200=PLANE('',#12201);+#12201=AXIS2_PLACEMENT_3D('',#8792,#8073,#3983);+#12202=ADVANCED_FACE('',(#12203),#12210,.F.);+#12203=FACE_BOUND('',#12204,.F.);+#12204=EDGE_LOOP('',(#12205,#8845,#12208,#12209));+#12205=ORIENTED_EDGE('',*,*,#12206,.T.);+#12206=EDGE_CURVE('',#8786,#8842,#12207,.T.);+#12207=LINE('',#8787,#1097);+#12208=ORIENTED_EDGE('',*,*,#12196,.F.);+#12209=ORIENTED_EDGE('',*,*,#8790,.F.);+#12210=CYLINDRICAL_SURFACE('',#8794,1.E-01);+#12211=ADVANCED_FACE('',(#12212),#12219,.F.);+#12212=FACE_BOUND('',#12213,.F.);+#12213=EDGE_LOOP('',(#12214,#8840,#12217,#12218));+#12214=ORIENTED_EDGE('',*,*,#12215,.T.);+#12215=EDGE_CURVE('',#8781,#8837,#12216,.T.);+#12216=LINE('',#8782,#1097);+#12217=ORIENTED_EDGE('',*,*,#12206,.F.);+#12218=ORIENTED_EDGE('',*,*,#8785,.F.);+#12219=PLANE('',#12220);+#12220=AXIS2_PLACEMENT_3D('',#8782,#312,#278);+#12221=ADVANCED_FACE('',(#12222),#12229,.F.);+#12222=FACE_BOUND('',#12223,.F.);+#12223=EDGE_LOOP('',(#12224,#8835,#12227,#12228));+#12224=ORIENTED_EDGE('',*,*,#12225,.T.);+#12225=EDGE_CURVE('',#8776,#8832,#12226,.T.);+#12226=LINE('',#8777,#1097);+#12227=ORIENTED_EDGE('',*,*,#12215,.F.);+#12228=ORIENTED_EDGE('',*,*,#8780,.F.);+#12229=PLANE('',#12230);+#12230=AXIS2_PLACEMENT_3D('',#8777,#278,#13);+#12231=ADVANCED_FACE('',(#12232),#12239,.F.);+#12232=FACE_BOUND('',#12233,.F.);+#12233=EDGE_LOOP('',(#12234,#8830,#12237,#12238));+#12234=ORIENTED_EDGE('',*,*,#12235,.T.);+#12235=EDGE_CURVE('',#8769,#8825,#12236,.T.);+#12236=LINE('',#8770,#1097);+#12237=ORIENTED_EDGE('',*,*,#12225,.F.);+#12238=ORIENTED_EDGE('',*,*,#8775,.F.);+#12239=PLANE('',#12240);+#12240=AXIS2_PLACEMENT_3D('',#8770,#13,#3929);+#12241=ADVANCED_FACE('',(#12242),#12249,.T.);+#12242=FACE_BOUND('',#12243,.F.);+#12243=EDGE_LOOP('',(#12244,#8823,#12247,#12248));+#12244=ORIENTED_EDGE('',*,*,#12245,.T.);+#12245=EDGE_CURVE('',#8764,#8820,#12246,.T.);+#12246=LINE('',#8765,#1097);+#12247=ORIENTED_EDGE('',*,*,#12235,.F.);+#12248=ORIENTED_EDGE('',*,*,#8768,.F.);+#12249=CYLINDRICAL_SURFACE('',#12250,0.2);+#12250=AXIS2_PLACEMENT_3D('',#8773,#3937,#3954);+#12251=ADVANCED_FACE('',(#12252),#12257,.F.);+#12252=FACE_BOUND('',#12253,.F.);+#12253=EDGE_LOOP('',(#12254,#8818,#12255,#12256));+#12254=ORIENTED_EDGE('',*,*,#11894,.T.);+#12255=ORIENTED_EDGE('',*,*,#12245,.F.);+#12256=ORIENTED_EDGE('',*,*,#8763,.F.);+#12257=PLANE('',#12258);+#12258=AXIS2_PLACEMENT_3D('',#8758,#8133,#3945);+#12259=ADVANCED_FACE('',(#12260),#12267,.F.);+#12260=FACE_BOUND('',#12261,.F.);+#12261=EDGE_LOOP('',(#12262,#8974,#12265,#12266));+#12262=ORIENTED_EDGE('',*,*,#12263,.T.);+#12263=EDGE_CURVE('',#8914,#8970,#12264,.T.);+#12264=LINE('',#8915,#1097);+#12265=ORIENTED_EDGE('',*,*,#8990,.F.);+#12266=ORIENTED_EDGE('',*,*,#8919,.F.);+#12267=PLANE('',#12268);+#12268=AXIS2_PLACEMENT_3D('',#8915,#8073,#3983);+#12269=ADVANCED_FACE('',(#12270),#12277,.F.);+#12270=FACE_BOUND('',#12271,.F.);+#12271=EDGE_LOOP('',(#12272,#8968,#12275,#12276));+#12272=ORIENTED_EDGE('',*,*,#12273,.T.);+#12273=EDGE_CURVE('',#8909,#8965,#12274,.T.);+#12274=LINE('',#8910,#1097);+#12275=ORIENTED_EDGE('',*,*,#12263,.F.);+#12276=ORIENTED_EDGE('',*,*,#8913,.F.);+#12277=CYLINDRICAL_SURFACE('',#8917,1.E-01);+#12278=ADVANCED_FACE('',(#12279),#12286,.F.);+#12279=FACE_BOUND('',#12280,.F.);+#12280=EDGE_LOOP('',(#12281,#8963,#12284,#12285));+#12281=ORIENTED_EDGE('',*,*,#12282,.T.);+#12282=EDGE_CURVE('',#8904,#8960,#12283,.T.);+#12283=LINE('',#8905,#1097);+#12284=ORIENTED_EDGE('',*,*,#12273,.F.);+#12285=ORIENTED_EDGE('',*,*,#8908,.F.);+#12286=PLANE('',#12287);+#12287=AXIS2_PLACEMENT_3D('',#8905,#312,#278);+#12288=ADVANCED_FACE('',(#12289),#12296,.F.);+#12289=FACE_BOUND('',#12290,.F.);+#12290=EDGE_LOOP('',(#12291,#8958,#12294,#12295));+#12291=ORIENTED_EDGE('',*,*,#12292,.T.);+#12292=EDGE_CURVE('',#8899,#8955,#12293,.T.);+#12293=LINE('',#8900,#1097);+#12294=ORIENTED_EDGE('',*,*,#12282,.F.);+#12295=ORIENTED_EDGE('',*,*,#8903,.F.);+#12296=PLANE('',#12297);+#12297=AXIS2_PLACEMENT_3D('',#8900,#278,#13);+#12298=ADVANCED_FACE('',(#12299),#12306,.F.);+#12299=FACE_BOUND('',#12300,.F.);+#12300=EDGE_LOOP('',(#12301,#8953,#12304,#12305));+#12301=ORIENTED_EDGE('',*,*,#12302,.T.);+#12302=EDGE_CURVE('',#8892,#8948,#12303,.T.);+#12303=LINE('',#8893,#1097);+#12304=ORIENTED_EDGE('',*,*,#12292,.F.);+#12305=ORIENTED_EDGE('',*,*,#8898,.F.);+#12306=PLANE('',#12307);+#12307=AXIS2_PLACEMENT_3D('',#8893,#13,#3929);+#12308=ADVANCED_FACE('',(#12309),#12316,.T.);+#12309=FACE_BOUND('',#12310,.F.);+#12310=EDGE_LOOP('',(#12311,#8946,#12314,#12315));+#12311=ORIENTED_EDGE('',*,*,#12312,.T.);+#12312=EDGE_CURVE('',#8887,#8943,#12313,.T.);+#12313=LINE('',#8888,#1097);+#12314=ORIENTED_EDGE('',*,*,#12302,.F.);+#12315=ORIENTED_EDGE('',*,*,#8891,.F.);+#12316=CYLINDRICAL_SURFACE('',#12317,0.2);+#12317=AXIS2_PLACEMENT_3D('',#8896,#3937,#3954);+#12318=ADVANCED_FACE('',(#12319),#12324,.F.);+#12319=FACE_BOUND('',#12320,.F.);+#12320=EDGE_LOOP('',(#12321,#8941,#12322,#12323));+#12321=ORIENTED_EDGE('',*,*,#11903,.T.);+#12322=ORIENTED_EDGE('',*,*,#12312,.F.);+#12323=ORIENTED_EDGE('',*,*,#8886,.F.);+#12324=PLANE('',#12325);+#12325=AXIS2_PLACEMENT_3D('',#8881,#8133,#3945);+#12326=ADVANCED_FACE('',(#12327),#12334,.F.);+#12327=FACE_BOUND('',#12328,.F.);+#12328=EDGE_LOOP('',(#12329,#9097,#12332,#12333));+#12329=ORIENTED_EDGE('',*,*,#12330,.T.);+#12330=EDGE_CURVE('',#9037,#9093,#12331,.T.);+#12331=LINE('',#9038,#1097);+#12332=ORIENTED_EDGE('',*,*,#9113,.F.);+#12333=ORIENTED_EDGE('',*,*,#9042,.F.);+#12334=PLANE('',#12335);+#12335=AXIS2_PLACEMENT_3D('',#9038,#8073,#3983);+#12336=ADVANCED_FACE('',(#12337),#12344,.F.);+#12337=FACE_BOUND('',#12338,.F.);+#12338=EDGE_LOOP('',(#12339,#9091,#12342,#12343));+#12339=ORIENTED_EDGE('',*,*,#12340,.T.);+#12340=EDGE_CURVE('',#9032,#9088,#12341,.T.);+#12341=LINE('',#9033,#1097);+#12342=ORIENTED_EDGE('',*,*,#12330,.F.);+#12343=ORIENTED_EDGE('',*,*,#9036,.F.);+#12344=CYLINDRICAL_SURFACE('',#9040,1.E-01);+#12345=ADVANCED_FACE('',(#12346),#12353,.F.);+#12346=FACE_BOUND('',#12347,.F.);+#12347=EDGE_LOOP('',(#12348,#9086,#12351,#12352));+#12348=ORIENTED_EDGE('',*,*,#12349,.T.);+#12349=EDGE_CURVE('',#9027,#9083,#12350,.T.);+#12350=LINE('',#9028,#1097);+#12351=ORIENTED_EDGE('',*,*,#12340,.F.);+#12352=ORIENTED_EDGE('',*,*,#9031,.F.);+#12353=PLANE('',#12354);+#12354=AXIS2_PLACEMENT_3D('',#9028,#312,#278);+#12355=ADVANCED_FACE('',(#12356),#12363,.F.);+#12356=FACE_BOUND('',#12357,.F.);+#12357=EDGE_LOOP('',(#12358,#9081,#12361,#12362));+#12358=ORIENTED_EDGE('',*,*,#12359,.T.);+#12359=EDGE_CURVE('',#9022,#9078,#12360,.T.);+#12360=LINE('',#9023,#1097);+#12361=ORIENTED_EDGE('',*,*,#12349,.F.);+#12362=ORIENTED_EDGE('',*,*,#9026,.F.);+#12363=PLANE('',#12364);+#12364=AXIS2_PLACEMENT_3D('',#9023,#278,#13);+#12365=ADVANCED_FACE('',(#12366),#12373,.F.);+#12366=FACE_BOUND('',#12367,.F.);+#12367=EDGE_LOOP('',(#12368,#9076,#12371,#12372));+#12368=ORIENTED_EDGE('',*,*,#12369,.T.);+#12369=EDGE_CURVE('',#9015,#9071,#12370,.T.);+#12370=LINE('',#9016,#1097);+#12371=ORIENTED_EDGE('',*,*,#12359,.F.);+#12372=ORIENTED_EDGE('',*,*,#9021,.F.);+#12373=PLANE('',#12374);+#12374=AXIS2_PLACEMENT_3D('',#9016,#13,#3929);+#12375=ADVANCED_FACE('',(#12376),#12383,.T.);+#12376=FACE_BOUND('',#12377,.F.);+#12377=EDGE_LOOP('',(#12378,#9069,#12381,#12382));+#12378=ORIENTED_EDGE('',*,*,#12379,.T.);+#12379=EDGE_CURVE('',#9010,#9066,#12380,.T.);+#12380=LINE('',#9011,#1097);+#12381=ORIENTED_EDGE('',*,*,#12369,.F.);+#12382=ORIENTED_EDGE('',*,*,#9014,.F.);+#12383=CYLINDRICAL_SURFACE('',#12384,0.2);+#12384=AXIS2_PLACEMENT_3D('',#9019,#3937,#3954);+#12385=ADVANCED_FACE('',(#12386),#12391,.F.);+#12386=FACE_BOUND('',#12387,.F.);+#12387=EDGE_LOOP('',(#12388,#9064,#12389,#12390));+#12388=ORIENTED_EDGE('',*,*,#11912,.T.);+#12389=ORIENTED_EDGE('',*,*,#12379,.F.);+#12390=ORIENTED_EDGE('',*,*,#9009,.F.);+#12391=PLANE('',#12392);+#12392=AXIS2_PLACEMENT_3D('',#9004,#8133,#3945);+#12393=ADVANCED_FACE('',(#12394),#12401,.F.);+#12394=FACE_BOUND('',#12395,.F.);+#12395=EDGE_LOOP('',(#12396,#9220,#12399,#12400));+#12396=ORIENTED_EDGE('',*,*,#12397,.T.);+#12397=EDGE_CURVE('',#9160,#9216,#12398,.T.);+#12398=LINE('',#9161,#1097);+#12399=ORIENTED_EDGE('',*,*,#9236,.F.);+#12400=ORIENTED_EDGE('',*,*,#9165,.F.);+#12401=PLANE('',#12402);+#12402=AXIS2_PLACEMENT_3D('',#9161,#8073,#3983);+#12403=ADVANCED_FACE('',(#12404),#12411,.F.);+#12404=FACE_BOUND('',#12405,.F.);+#12405=EDGE_LOOP('',(#12406,#9214,#12409,#12410));+#12406=ORIENTED_EDGE('',*,*,#12407,.T.);+#12407=EDGE_CURVE('',#9155,#9211,#12408,.T.);+#12408=LINE('',#9156,#1097);+#12409=ORIENTED_EDGE('',*,*,#12397,.F.);+#12410=ORIENTED_EDGE('',*,*,#9159,.F.);+#12411=CYLINDRICAL_SURFACE('',#9163,1.E-01);+#12412=ADVANCED_FACE('',(#12413),#12420,.F.);+#12413=FACE_BOUND('',#12414,.F.);+#12414=EDGE_LOOP('',(#12415,#9209,#12418,#12419));+#12415=ORIENTED_EDGE('',*,*,#12416,.T.);+#12416=EDGE_CURVE('',#9150,#9206,#12417,.T.);+#12417=LINE('',#9151,#1097);+#12418=ORIENTED_EDGE('',*,*,#12407,.F.);+#12419=ORIENTED_EDGE('',*,*,#9154,.F.);+#12420=PLANE('',#12421);+#12421=AXIS2_PLACEMENT_3D('',#9151,#312,#278);+#12422=ADVANCED_FACE('',(#12423),#12430,.F.);+#12423=FACE_BOUND('',#12424,.F.);+#12424=EDGE_LOOP('',(#12425,#9204,#12428,#12429));+#12425=ORIENTED_EDGE('',*,*,#12426,.T.);+#12426=EDGE_CURVE('',#9145,#9201,#12427,.T.);+#12427=LINE('',#9146,#1097);+#12428=ORIENTED_EDGE('',*,*,#12416,.F.);+#12429=ORIENTED_EDGE('',*,*,#9149,.F.);+#12430=PLANE('',#12431);+#12431=AXIS2_PLACEMENT_3D('',#9146,#278,#13);+#12432=ADVANCED_FACE('',(#12433),#12440,.F.);+#12433=FACE_BOUND('',#12434,.F.);+#12434=EDGE_LOOP('',(#12435,#9199,#12438,#12439));+#12435=ORIENTED_EDGE('',*,*,#12436,.T.);+#12436=EDGE_CURVE('',#9138,#9194,#12437,.T.);+#12437=LINE('',#9139,#1097);+#12438=ORIENTED_EDGE('',*,*,#12426,.F.);+#12439=ORIENTED_EDGE('',*,*,#9144,.F.);+#12440=PLANE('',#12441);+#12441=AXIS2_PLACEMENT_3D('',#9139,#13,#3929);+#12442=ADVANCED_FACE('',(#12443),#12450,.T.);+#12443=FACE_BOUND('',#12444,.F.);+#12444=EDGE_LOOP('',(#12445,#9192,#12448,#12449));+#12445=ORIENTED_EDGE('',*,*,#12446,.T.);+#12446=EDGE_CURVE('',#9133,#9189,#12447,.T.);+#12447=LINE('',#9134,#1097);+#12448=ORIENTED_EDGE('',*,*,#12436,.F.);+#12449=ORIENTED_EDGE('',*,*,#9137,.F.);+#12450=CYLINDRICAL_SURFACE('',#12451,0.2);+#12451=AXIS2_PLACEMENT_3D('',#9142,#3937,#3954);+#12452=ADVANCED_FACE('',(#12453),#12458,.F.);+#12453=FACE_BOUND('',#12454,.F.);+#12454=EDGE_LOOP('',(#12455,#9187,#12456,#12457));+#12455=ORIENTED_EDGE('',*,*,#11921,.T.);+#12456=ORIENTED_EDGE('',*,*,#12446,.F.);+#12457=ORIENTED_EDGE('',*,*,#9132,.F.);+#12458=PLANE('',#12459);+#12459=AXIS2_PLACEMENT_3D('',#9127,#8133,#3945);+#12460=ADVANCED_FACE('',(#12461),#12468,.F.);+#12461=FACE_BOUND('',#12462,.F.);+#12462=EDGE_LOOP('',(#12463,#9343,#12466,#12467));+#12463=ORIENTED_EDGE('',*,*,#12464,.T.);+#12464=EDGE_CURVE('',#9283,#9339,#12465,.T.);+#12465=LINE('',#9284,#1097);+#12466=ORIENTED_EDGE('',*,*,#9359,.F.);+#12467=ORIENTED_EDGE('',*,*,#9288,.F.);+#12468=PLANE('',#12469);+#12469=AXIS2_PLACEMENT_3D('',#9284,#8073,#3983);+#12470=ADVANCED_FACE('',(#12471),#12478,.F.);+#12471=FACE_BOUND('',#12472,.F.);+#12472=EDGE_LOOP('',(#12473,#9337,#12476,#12477));+#12473=ORIENTED_EDGE('',*,*,#12474,.T.);+#12474=EDGE_CURVE('',#9278,#9334,#12475,.T.);+#12475=LINE('',#9279,#1097);+#12476=ORIENTED_EDGE('',*,*,#12464,.F.);+#12477=ORIENTED_EDGE('',*,*,#9282,.F.);+#12478=CYLINDRICAL_SURFACE('',#9286,1.E-01);+#12479=ADVANCED_FACE('',(#12480),#12487,.F.);+#12480=FACE_BOUND('',#12481,.F.);+#12481=EDGE_LOOP('',(#12482,#9332,#12485,#12486));+#12482=ORIENTED_EDGE('',*,*,#12483,.T.);+#12483=EDGE_CURVE('',#9273,#9329,#12484,.T.);+#12484=LINE('',#9274,#1097);+#12485=ORIENTED_EDGE('',*,*,#12474,.F.);+#12486=ORIENTED_EDGE('',*,*,#9277,.F.);+#12487=PLANE('',#12488);+#12488=AXIS2_PLACEMENT_3D('',#9274,#312,#278);+#12489=ADVANCED_FACE('',(#12490),#12497,.F.);+#12490=FACE_BOUND('',#12491,.F.);+#12491=EDGE_LOOP('',(#12492,#9327,#12495,#12496));+#12492=ORIENTED_EDGE('',*,*,#12493,.T.);+#12493=EDGE_CURVE('',#9268,#9324,#12494,.T.);+#12494=LINE('',#9269,#1097);+#12495=ORIENTED_EDGE('',*,*,#12483,.F.);+#12496=ORIENTED_EDGE('',*,*,#9272,.F.);+#12497=PLANE('',#12498);+#12498=AXIS2_PLACEMENT_3D('',#9269,#278,#13);+#12499=ADVANCED_FACE('',(#12500),#12507,.F.);+#12500=FACE_BOUND('',#12501,.F.);+#12501=EDGE_LOOP('',(#12502,#9322,#12505,#12506));+#12502=ORIENTED_EDGE('',*,*,#12503,.T.);+#12503=EDGE_CURVE('',#9261,#9317,#12504,.T.);+#12504=LINE('',#9262,#1097);+#12505=ORIENTED_EDGE('',*,*,#12493,.F.);+#12506=ORIENTED_EDGE('',*,*,#9267,.F.);+#12507=PLANE('',#12508);+#12508=AXIS2_PLACEMENT_3D('',#9262,#13,#3929);+#12509=ADVANCED_FACE('',(#12510),#12517,.T.);+#12510=FACE_BOUND('',#12511,.F.);+#12511=EDGE_LOOP('',(#12512,#9315,#12515,#12516));+#12512=ORIENTED_EDGE('',*,*,#12513,.T.);+#12513=EDGE_CURVE('',#9256,#9312,#12514,.T.);+#12514=LINE('',#9257,#1097);+#12515=ORIENTED_EDGE('',*,*,#12503,.F.);+#12516=ORIENTED_EDGE('',*,*,#9260,.F.);+#12517=CYLINDRICAL_SURFACE('',#12518,0.2);+#12518=AXIS2_PLACEMENT_3D('',#9265,#3937,#3954);+#12519=ADVANCED_FACE('',(#12520),#12525,.F.);+#12520=FACE_BOUND('',#12521,.F.);+#12521=EDGE_LOOP('',(#12522,#9310,#12523,#12524));+#12522=ORIENTED_EDGE('',*,*,#11930,.T.);+#12523=ORIENTED_EDGE('',*,*,#12513,.F.);+#12524=ORIENTED_EDGE('',*,*,#9255,.F.);+#12525=PLANE('',#12526);+#12526=AXIS2_PLACEMENT_3D('',#9250,#8133,#3945);+#12527=ADVANCED_FACE('',(#12528),#12535,.F.);+#12528=FACE_BOUND('',#12529,.F.);+#12529=EDGE_LOOP('',(#12530,#9466,#12533,#12534));+#12530=ORIENTED_EDGE('',*,*,#12531,.T.);+#12531=EDGE_CURVE('',#9406,#9462,#12532,.T.);+#12532=LINE('',#9407,#1097);+#12533=ORIENTED_EDGE('',*,*,#9482,.F.);+#12534=ORIENTED_EDGE('',*,*,#9411,.F.);+#12535=PLANE('',#12536);+#12536=AXIS2_PLACEMENT_3D('',#9407,#8073,#3983);+#12537=ADVANCED_FACE('',(#12538),#12545,.F.);+#12538=FACE_BOUND('',#12539,.F.);+#12539=EDGE_LOOP('',(#12540,#9460,#12543,#12544));+#12540=ORIENTED_EDGE('',*,*,#12541,.T.);+#12541=EDGE_CURVE('',#9401,#9457,#12542,.T.);+#12542=LINE('',#9402,#1097);+#12543=ORIENTED_EDGE('',*,*,#12531,.F.);+#12544=ORIENTED_EDGE('',*,*,#9405,.F.);+#12545=CYLINDRICAL_SURFACE('',#9409,1.E-01);+#12546=ADVANCED_FACE('',(#12547),#12554,.F.);+#12547=FACE_BOUND('',#12548,.F.);+#12548=EDGE_LOOP('',(#12549,#9455,#12552,#12553));+#12549=ORIENTED_EDGE('',*,*,#12550,.T.);+#12550=EDGE_CURVE('',#9396,#9452,#12551,.T.);+#12551=LINE('',#9397,#1097);+#12552=ORIENTED_EDGE('',*,*,#12541,.F.);+#12553=ORIENTED_EDGE('',*,*,#9400,.F.);+#12554=PLANE('',#12555);+#12555=AXIS2_PLACEMENT_3D('',#9397,#312,#278);+#12556=ADVANCED_FACE('',(#12557),#12564,.F.);+#12557=FACE_BOUND('',#12558,.F.);+#12558=EDGE_LOOP('',(#12559,#9450,#12562,#12563));+#12559=ORIENTED_EDGE('',*,*,#12560,.T.);+#12560=EDGE_CURVE('',#9391,#9447,#12561,.T.);+#12561=LINE('',#9392,#1097);+#12562=ORIENTED_EDGE('',*,*,#12550,.F.);+#12563=ORIENTED_EDGE('',*,*,#9395,.F.);+#12564=PLANE('',#12565);+#12565=AXIS2_PLACEMENT_3D('',#9392,#278,#13);+#12566=ADVANCED_FACE('',(#12567),#12574,.F.);+#12567=FACE_BOUND('',#12568,.F.);+#12568=EDGE_LOOP('',(#12569,#9445,#12572,#12573));+#12569=ORIENTED_EDGE('',*,*,#12570,.T.);+#12570=EDGE_CURVE('',#9384,#9440,#12571,.T.);+#12571=LINE('',#9385,#1097);+#12572=ORIENTED_EDGE('',*,*,#12560,.F.);+#12573=ORIENTED_EDGE('',*,*,#9390,.F.);+#12574=PLANE('',#12575);+#12575=AXIS2_PLACEMENT_3D('',#9385,#13,#3929);+#12576=ADVANCED_FACE('',(#12577),#12584,.T.);+#12577=FACE_BOUND('',#12578,.F.);+#12578=EDGE_LOOP('',(#12579,#9438,#12582,#12583));+#12579=ORIENTED_EDGE('',*,*,#12580,.T.);+#12580=EDGE_CURVE('',#9379,#9435,#12581,.T.);+#12581=LINE('',#9380,#1097);+#12582=ORIENTED_EDGE('',*,*,#12570,.F.);+#12583=ORIENTED_EDGE('',*,*,#9383,.F.);+#12584=CYLINDRICAL_SURFACE('',#12585,0.2);+#12585=AXIS2_PLACEMENT_3D('',#9388,#3937,#3954);+#12586=ADVANCED_FACE('',(#12587),#12592,.F.);+#12587=FACE_BOUND('',#12588,.F.);+#12588=EDGE_LOOP('',(#12589,#9433,#12590,#12591));+#12589=ORIENTED_EDGE('',*,*,#11939,.T.);+#12590=ORIENTED_EDGE('',*,*,#12580,.F.);+#12591=ORIENTED_EDGE('',*,*,#9378,.F.);+#12592=PLANE('',#12593);+#12593=AXIS2_PLACEMENT_3D('',#9373,#8133,#3945);+#12594=ADVANCED_FACE('',(#12595),#12602,.F.);+#12595=FACE_BOUND('',#12596,.F.);+#12596=EDGE_LOOP('',(#12597,#9589,#12600,#12601));+#12597=ORIENTED_EDGE('',*,*,#12598,.T.);+#12598=EDGE_CURVE('',#9529,#9585,#12599,.T.);+#12599=LINE('',#9530,#1097);+#12600=ORIENTED_EDGE('',*,*,#9605,.F.);+#12601=ORIENTED_EDGE('',*,*,#9534,.F.);+#12602=PLANE('',#12603);+#12603=AXIS2_PLACEMENT_3D('',#9530,#8073,#3983);+#12604=ADVANCED_FACE('',(#12605),#12612,.F.);+#12605=FACE_BOUND('',#12606,.F.);+#12606=EDGE_LOOP('',(#12607,#9583,#12610,#12611));+#12607=ORIENTED_EDGE('',*,*,#12608,.T.);+#12608=EDGE_CURVE('',#9524,#9580,#12609,.T.);+#12609=LINE('',#9525,#1097);+#12610=ORIENTED_EDGE('',*,*,#12598,.F.);+#12611=ORIENTED_EDGE('',*,*,#9528,.F.);+#12612=CYLINDRICAL_SURFACE('',#9532,1.E-01);+#12613=ADVANCED_FACE('',(#12614),#12621,.F.);+#12614=FACE_BOUND('',#12615,.F.);+#12615=EDGE_LOOP('',(#12616,#9578,#12619,#12620));+#12616=ORIENTED_EDGE('',*,*,#12617,.T.);+#12617=EDGE_CURVE('',#9519,#9575,#12618,.T.);+#12618=LINE('',#9520,#1097);+#12619=ORIENTED_EDGE('',*,*,#12608,.F.);+#12620=ORIENTED_EDGE('',*,*,#9523,.F.);+#12621=PLANE('',#12622);+#12622=AXIS2_PLACEMENT_3D('',#9520,#312,#278);+#12623=ADVANCED_FACE('',(#12624),#12631,.F.);+#12624=FACE_BOUND('',#12625,.F.);+#12625=EDGE_LOOP('',(#12626,#9573,#12629,#12630));+#12626=ORIENTED_EDGE('',*,*,#12627,.T.);+#12627=EDGE_CURVE('',#9514,#9570,#12628,.T.);+#12628=LINE('',#9515,#1097);+#12629=ORIENTED_EDGE('',*,*,#12617,.F.);+#12630=ORIENTED_EDGE('',*,*,#9518,.F.);+#12631=PLANE('',#12632);+#12632=AXIS2_PLACEMENT_3D('',#9515,#278,#13);+#12633=ADVANCED_FACE('',(#12634),#12641,.F.);+#12634=FACE_BOUND('',#12635,.F.);+#12635=EDGE_LOOP('',(#12636,#9568,#12639,#12640));+#12636=ORIENTED_EDGE('',*,*,#12637,.T.);+#12637=EDGE_CURVE('',#9507,#9563,#12638,.T.);+#12638=LINE('',#9508,#1097);+#12639=ORIENTED_EDGE('',*,*,#12627,.F.);+#12640=ORIENTED_EDGE('',*,*,#9513,.F.);+#12641=PLANE('',#12642);+#12642=AXIS2_PLACEMENT_3D('',#9508,#13,#3929);+#12643=ADVANCED_FACE('',(#12644),#12651,.T.);+#12644=FACE_BOUND('',#12645,.F.);+#12645=EDGE_LOOP('',(#12646,#9561,#12649,#12650));+#12646=ORIENTED_EDGE('',*,*,#12647,.T.);+#12647=EDGE_CURVE('',#9502,#9558,#12648,.T.);+#12648=LINE('',#9503,#1097);+#12649=ORIENTED_EDGE('',*,*,#12637,.F.);+#12650=ORIENTED_EDGE('',*,*,#9506,.F.);+#12651=CYLINDRICAL_SURFACE('',#12652,0.2);+#12652=AXIS2_PLACEMENT_3D('',#9511,#3937,#3954);+#12653=ADVANCED_FACE('',(#12654),#12659,.F.);+#12654=FACE_BOUND('',#12655,.F.);+#12655=EDGE_LOOP('',(#12656,#9556,#12657,#12658));+#12656=ORIENTED_EDGE('',*,*,#11948,.T.);+#12657=ORIENTED_EDGE('',*,*,#12647,.F.);+#12658=ORIENTED_EDGE('',*,*,#9501,.F.);+#12659=PLANE('',#12660);+#12660=AXIS2_PLACEMENT_3D('',#9496,#8133,#3945);+#12661=ADVANCED_FACE('',(#12662),#12669,.F.);+#12662=FACE_BOUND('',#12663,.F.);+#12663=EDGE_LOOP('',(#12664,#9712,#12667,#12668));+#12664=ORIENTED_EDGE('',*,*,#12665,.T.);+#12665=EDGE_CURVE('',#9652,#9708,#12666,.T.);+#12666=LINE('',#9653,#1097);+#12667=ORIENTED_EDGE('',*,*,#9728,.F.);+#12668=ORIENTED_EDGE('',*,*,#9657,.F.);+#12669=PLANE('',#12670);+#12670=AXIS2_PLACEMENT_3D('',#9653,#8073,#3983);+#12671=ADVANCED_FACE('',(#12672),#12679,.F.);+#12672=FACE_BOUND('',#12673,.F.);+#12673=EDGE_LOOP('',(#12674,#9706,#12677,#12678));+#12674=ORIENTED_EDGE('',*,*,#12675,.T.);+#12675=EDGE_CURVE('',#9647,#9703,#12676,.T.);+#12676=LINE('',#9648,#1097);+#12677=ORIENTED_EDGE('',*,*,#12665,.F.);+#12678=ORIENTED_EDGE('',*,*,#9651,.F.);+#12679=CYLINDRICAL_SURFACE('',#9655,1.E-01);+#12680=ADVANCED_FACE('',(#12681),#12688,.F.);+#12681=FACE_BOUND('',#12682,.F.);+#12682=EDGE_LOOP('',(#12683,#9701,#12686,#12687));+#12683=ORIENTED_EDGE('',*,*,#12684,.T.);+#12684=EDGE_CURVE('',#9642,#9698,#12685,.T.);+#12685=LINE('',#9643,#1097);+#12686=ORIENTED_EDGE('',*,*,#12675,.F.);+#12687=ORIENTED_EDGE('',*,*,#9646,.F.);+#12688=PLANE('',#12689);+#12689=AXIS2_PLACEMENT_3D('',#9643,#312,#278);+#12690=ADVANCED_FACE('',(#12691),#12698,.F.);+#12691=FACE_BOUND('',#12692,.F.);+#12692=EDGE_LOOP('',(#12693,#9696,#12696,#12697));+#12693=ORIENTED_EDGE('',*,*,#12694,.T.);+#12694=EDGE_CURVE('',#9637,#9693,#12695,.T.);+#12695=LINE('',#9638,#1097);+#12696=ORIENTED_EDGE('',*,*,#12684,.F.);+#12697=ORIENTED_EDGE('',*,*,#9641,.F.);+#12698=PLANE('',#12699);+#12699=AXIS2_PLACEMENT_3D('',#9638,#278,#13);+#12700=ADVANCED_FACE('',(#12701),#12708,.F.);+#12701=FACE_BOUND('',#12702,.F.);+#12702=EDGE_LOOP('',(#12703,#9691,#12706,#12707));+#12703=ORIENTED_EDGE('',*,*,#12704,.T.);+#12704=EDGE_CURVE('',#9630,#9686,#12705,.T.);+#12705=LINE('',#9631,#1097);+#12706=ORIENTED_EDGE('',*,*,#12694,.F.);+#12707=ORIENTED_EDGE('',*,*,#9636,.F.);+#12708=PLANE('',#12709);+#12709=AXIS2_PLACEMENT_3D('',#9631,#13,#3929);+#12710=ADVANCED_FACE('',(#12711),#12718,.T.);+#12711=FACE_BOUND('',#12712,.F.);+#12712=EDGE_LOOP('',(#12713,#9684,#12716,#12717));+#12713=ORIENTED_EDGE('',*,*,#12714,.T.);+#12714=EDGE_CURVE('',#9625,#9681,#12715,.T.);+#12715=LINE('',#9626,#1097);+#12716=ORIENTED_EDGE('',*,*,#12704,.F.);+#12717=ORIENTED_EDGE('',*,*,#9629,.F.);+#12718=CYLINDRICAL_SURFACE('',#12719,0.2);+#12719=AXIS2_PLACEMENT_3D('',#9634,#3937,#3954);+#12720=ADVANCED_FACE('',(#12721),#12726,.F.);+#12721=FACE_BOUND('',#12722,.F.);+#12722=EDGE_LOOP('',(#12723,#9679,#12724,#12725));+#12723=ORIENTED_EDGE('',*,*,#11957,.T.);+#12724=ORIENTED_EDGE('',*,*,#12714,.F.);+#12725=ORIENTED_EDGE('',*,*,#9624,.F.);+#12726=PLANE('',#12727);+#12727=AXIS2_PLACEMENT_3D('',#9619,#8133,#3945);+#12728=ADVANCED_FACE('',(#12729),#12736,.F.);+#12729=FACE_BOUND('',#12730,.F.);+#12730=EDGE_LOOP('',(#12731,#9835,#12734,#12735));+#12731=ORIENTED_EDGE('',*,*,#12732,.T.);+#12732=EDGE_CURVE('',#9775,#9831,#12733,.T.);+#12733=LINE('',#9776,#1097);+#12734=ORIENTED_EDGE('',*,*,#9851,.F.);+#12735=ORIENTED_EDGE('',*,*,#9780,.F.);+#12736=PLANE('',#12737);+#12737=AXIS2_PLACEMENT_3D('',#9776,#8073,#3983);+#12738=ADVANCED_FACE('',(#12739),#12746,.F.);+#12739=FACE_BOUND('',#12740,.F.);+#12740=EDGE_LOOP('',(#12741,#9829,#12744,#12745));+#12741=ORIENTED_EDGE('',*,*,#12742,.T.);+#12742=EDGE_CURVE('',#9770,#9826,#12743,.T.);+#12743=LINE('',#9771,#1097);+#12744=ORIENTED_EDGE('',*,*,#12732,.F.);+#12745=ORIENTED_EDGE('',*,*,#9774,.F.);+#12746=CYLINDRICAL_SURFACE('',#9778,1.E-01);+#12747=ADVANCED_FACE('',(#12748),#12755,.F.);+#12748=FACE_BOUND('',#12749,.F.);+#12749=EDGE_LOOP('',(#12750,#9824,#12753,#12754));+#12750=ORIENTED_EDGE('',*,*,#12751,.T.);+#12751=EDGE_CURVE('',#9765,#9821,#12752,.T.);+#12752=LINE('',#9766,#1097);+#12753=ORIENTED_EDGE('',*,*,#12742,.F.);+#12754=ORIENTED_EDGE('',*,*,#9769,.F.);+#12755=PLANE('',#12756);+#12756=AXIS2_PLACEMENT_3D('',#9766,#312,#278);+#12757=ADVANCED_FACE('',(#12758),#12765,.F.);+#12758=FACE_BOUND('',#12759,.F.);+#12759=EDGE_LOOP('',(#12760,#9819,#12763,#12764));+#12760=ORIENTED_EDGE('',*,*,#12761,.T.);+#12761=EDGE_CURVE('',#9760,#9816,#12762,.T.);+#12762=LINE('',#9761,#1097);+#12763=ORIENTED_EDGE('',*,*,#12751,.F.);+#12764=ORIENTED_EDGE('',*,*,#9764,.F.);+#12765=PLANE('',#12766);+#12766=AXIS2_PLACEMENT_3D('',#9761,#278,#13);+#12767=ADVANCED_FACE('',(#12768),#12775,.F.);+#12768=FACE_BOUND('',#12769,.F.);+#12769=EDGE_LOOP('',(#12770,#9814,#12773,#12774));+#12770=ORIENTED_EDGE('',*,*,#12771,.T.);+#12771=EDGE_CURVE('',#9753,#9809,#12772,.T.);+#12772=LINE('',#9754,#1097);+#12773=ORIENTED_EDGE('',*,*,#12761,.F.);+#12774=ORIENTED_EDGE('',*,*,#9759,.F.);+#12775=PLANE('',#12776);+#12776=AXIS2_PLACEMENT_3D('',#9754,#13,#3929);+#12777=ADVANCED_FACE('',(#12778),#12785,.T.);+#12778=FACE_BOUND('',#12779,.F.);+#12779=EDGE_LOOP('',(#12780,#9807,#12783,#12784));+#12780=ORIENTED_EDGE('',*,*,#12781,.T.);+#12781=EDGE_CURVE('',#9748,#9804,#12782,.T.);+#12782=LINE('',#9749,#1097);+#12783=ORIENTED_EDGE('',*,*,#12771,.F.);+#12784=ORIENTED_EDGE('',*,*,#9752,.F.);+#12785=CYLINDRICAL_SURFACE('',#12786,0.2);+#12786=AXIS2_PLACEMENT_3D('',#9757,#3937,#3954);+#12787=ADVANCED_FACE('',(#12788),#12793,.F.);+#12788=FACE_BOUND('',#12789,.F.);+#12789=EDGE_LOOP('',(#12790,#9802,#12791,#12792));+#12790=ORIENTED_EDGE('',*,*,#11966,.T.);+#12791=ORIENTED_EDGE('',*,*,#12781,.F.);+#12792=ORIENTED_EDGE('',*,*,#9747,.F.);+#12793=PLANE('',#12794);+#12794=AXIS2_PLACEMENT_3D('',#9742,#8133,#3945);+#12795=ADVANCED_FACE('',(#12796),#12803,.F.);+#12796=FACE_BOUND('',#12797,.F.);+#12797=EDGE_LOOP('',(#12798,#9958,#12801,#12802));+#12798=ORIENTED_EDGE('',*,*,#12799,.T.);+#12799=EDGE_CURVE('',#9898,#9954,#12800,.T.);+#12800=LINE('',#9899,#1097);+#12801=ORIENTED_EDGE('',*,*,#9974,.F.);+#12802=ORIENTED_EDGE('',*,*,#9903,.F.);+#12803=PLANE('',#12804);+#12804=AXIS2_PLACEMENT_3D('',#9899,#8073,#3983);+#12805=ADVANCED_FACE('',(#12806),#12813,.F.);+#12806=FACE_BOUND('',#12807,.F.);+#12807=EDGE_LOOP('',(#12808,#9952,#12811,#12812));+#12808=ORIENTED_EDGE('',*,*,#12809,.T.);+#12809=EDGE_CURVE('',#9893,#9949,#12810,.T.);+#12810=LINE('',#9894,#1097);+#12811=ORIENTED_EDGE('',*,*,#12799,.F.);+#12812=ORIENTED_EDGE('',*,*,#9897,.F.);+#12813=CYLINDRICAL_SURFACE('',#9901,1.E-01);+#12814=ADVANCED_FACE('',(#12815),#12822,.F.);+#12815=FACE_BOUND('',#12816,.F.);+#12816=EDGE_LOOP('',(#12817,#9947,#12820,#12821));+#12817=ORIENTED_EDGE('',*,*,#12818,.T.);+#12818=EDGE_CURVE('',#9888,#9944,#12819,.T.);+#12819=LINE('',#9889,#1097);+#12820=ORIENTED_EDGE('',*,*,#12809,.F.);+#12821=ORIENTED_EDGE('',*,*,#9892,.F.);+#12822=PLANE('',#12823);+#12823=AXIS2_PLACEMENT_3D('',#9889,#312,#278);+#12824=ADVANCED_FACE('',(#12825),#12832,.F.);+#12825=FACE_BOUND('',#12826,.F.);+#12826=EDGE_LOOP('',(#12827,#9942,#12830,#12831));+#12827=ORIENTED_EDGE('',*,*,#12828,.T.);+#12828=EDGE_CURVE('',#9883,#9939,#12829,.T.);+#12829=LINE('',#9884,#1097);+#12830=ORIENTED_EDGE('',*,*,#12818,.F.);+#12831=ORIENTED_EDGE('',*,*,#9887,.F.);+#12832=PLANE('',#12833);+#12833=AXIS2_PLACEMENT_3D('',#9884,#278,#13);+#12834=ADVANCED_FACE('',(#12835),#12842,.F.);+#12835=FACE_BOUND('',#12836,.F.);+#12836=EDGE_LOOP('',(#12837,#9937,#12840,#12841));+#12837=ORIENTED_EDGE('',*,*,#12838,.T.);+#12838=EDGE_CURVE('',#9876,#9932,#12839,.T.);+#12839=LINE('',#9877,#1097);+#12840=ORIENTED_EDGE('',*,*,#12828,.F.);+#12841=ORIENTED_EDGE('',*,*,#9882,.F.);+#12842=PLANE('',#12843);+#12843=AXIS2_PLACEMENT_3D('',#9877,#13,#3929);+#12844=ADVANCED_FACE('',(#12845),#12852,.T.);+#12845=FACE_BOUND('',#12846,.F.);+#12846=EDGE_LOOP('',(#12847,#9930,#12850,#12851));+#12847=ORIENTED_EDGE('',*,*,#12848,.T.);+#12848=EDGE_CURVE('',#9871,#9927,#12849,.T.);+#12849=LINE('',#9872,#1097);+#12850=ORIENTED_EDGE('',*,*,#12838,.F.);+#12851=ORIENTED_EDGE('',*,*,#9875,.F.);+#12852=CYLINDRICAL_SURFACE('',#12853,0.2);+#12853=AXIS2_PLACEMENT_3D('',#9880,#3937,#3954);+#12854=ADVANCED_FACE('',(#12855),#12860,.F.);+#12855=FACE_BOUND('',#12856,.F.);+#12856=EDGE_LOOP('',(#12857,#9925,#12858,#12859));+#12857=ORIENTED_EDGE('',*,*,#11975,.T.);+#12858=ORIENTED_EDGE('',*,*,#12848,.F.);+#12859=ORIENTED_EDGE('',*,*,#9870,.F.);+#12860=PLANE('',#12861);+#12861=AXIS2_PLACEMENT_3D('',#9865,#8133,#3945);+#12862=ADVANCED_FACE('',(#12863),#12870,.F.);+#12863=FACE_BOUND('',#12864,.F.);+#12864=EDGE_LOOP('',(#12865,#10081,#12868,#12869));+#12865=ORIENTED_EDGE('',*,*,#12866,.T.);+#12866=EDGE_CURVE('',#10021,#10077,#12867,.T.);+#12867=LINE('',#10022,#1097);+#12868=ORIENTED_EDGE('',*,*,#10097,.F.);+#12869=ORIENTED_EDGE('',*,*,#10026,.F.);+#12870=PLANE('',#12871);+#12871=AXIS2_PLACEMENT_3D('',#10022,#8073,#3983);+#12872=ADVANCED_FACE('',(#12873),#12880,.F.);+#12873=FACE_BOUND('',#12874,.F.);+#12874=EDGE_LOOP('',(#12875,#10075,#12878,#12879));+#12875=ORIENTED_EDGE('',*,*,#12876,.T.);+#12876=EDGE_CURVE('',#10016,#10072,#12877,.T.);+#12877=LINE('',#10017,#1097);+#12878=ORIENTED_EDGE('',*,*,#12866,.F.);+#12879=ORIENTED_EDGE('',*,*,#10020,.F.);+#12880=CYLINDRICAL_SURFACE('',#10024,1.E-01);+#12881=ADVANCED_FACE('',(#12882),#12889,.F.);+#12882=FACE_BOUND('',#12883,.F.);+#12883=EDGE_LOOP('',(#12884,#10070,#12887,#12888));+#12884=ORIENTED_EDGE('',*,*,#12885,.T.);+#12885=EDGE_CURVE('',#10011,#10067,#12886,.T.);+#12886=LINE('',#10012,#1097);+#12887=ORIENTED_EDGE('',*,*,#12876,.F.);+#12888=ORIENTED_EDGE('',*,*,#10015,.F.);+#12889=PLANE('',#12890);+#12890=AXIS2_PLACEMENT_3D('',#10012,#312,#278);+#12891=ADVANCED_FACE('',(#12892),#12899,.F.);+#12892=FACE_BOUND('',#12893,.F.);+#12893=EDGE_LOOP('',(#12894,#10065,#12897,#12898));+#12894=ORIENTED_EDGE('',*,*,#12895,.T.);+#12895=EDGE_CURVE('',#10006,#10062,#12896,.T.);+#12896=LINE('',#10007,#1097);+#12897=ORIENTED_EDGE('',*,*,#12885,.F.);+#12898=ORIENTED_EDGE('',*,*,#10010,.F.);+#12899=PLANE('',#12900);+#12900=AXIS2_PLACEMENT_3D('',#10007,#278,#13);+#12901=ADVANCED_FACE('',(#12902),#12909,.F.);+#12902=FACE_BOUND('',#12903,.F.);+#12903=EDGE_LOOP('',(#12904,#10060,#12907,#12908));+#12904=ORIENTED_EDGE('',*,*,#12905,.T.);+#12905=EDGE_CURVE('',#9999,#10055,#12906,.T.);+#12906=LINE('',#10000,#1097);+#12907=ORIENTED_EDGE('',*,*,#12895,.F.);+#12908=ORIENTED_EDGE('',*,*,#10005,.F.);+#12909=PLANE('',#12910);+#12910=AXIS2_PLACEMENT_3D('',#10000,#13,#3929);+#12911=ADVANCED_FACE('',(#12912),#12919,.T.);+#12912=FACE_BOUND('',#12913,.F.);+#12913=EDGE_LOOP('',(#12914,#10053,#12917,#12918));+#12914=ORIENTED_EDGE('',*,*,#12915,.T.);+#12915=EDGE_CURVE('',#9994,#10050,#12916,.T.);+#12916=LINE('',#9995,#1097);+#12917=ORIENTED_EDGE('',*,*,#12905,.F.);+#12918=ORIENTED_EDGE('',*,*,#9998,.F.);+#12919=CYLINDRICAL_SURFACE('',#12920,0.2);+#12920=AXIS2_PLACEMENT_3D('',#10003,#3937,#3954);+#12921=ADVANCED_FACE('',(#12922),#12927,.F.);+#12922=FACE_BOUND('',#12923,.F.);+#12923=EDGE_LOOP('',(#12924,#10048,#12925,#12926));+#12924=ORIENTED_EDGE('',*,*,#11984,.T.);+#12925=ORIENTED_EDGE('',*,*,#12915,.F.);+#12926=ORIENTED_EDGE('',*,*,#9993,.F.);+#12927=PLANE('',#12928);+#12928=AXIS2_PLACEMENT_3D('',#9988,#8133,#3945);+#12929=ADVANCED_FACE('',(#12930),#8023,.F.);+#12930=FACE_BOUND('',#12931,.F.);+#12931=EDGE_LOOP('',(#11702,#12932,#12933,#12937));+#12932=ORIENTED_EDGE('',*,*,#11874,.T.);+#12933=ORIENTED_EDGE('',*,*,#12934,.T.);+#12934=EDGE_CURVE('',#11871,#10325,#12935,.T.);+#12935=LINE('',#12936,#1074);+#12936=CARTESIAN_POINT('',(5.22,-7.,0.630119079428));+#12937=ORIENTED_EDGE('',*,*,#10324,.F.);+#12938=ADVANCED_FACE('',(#12939),#12998,.F.);+#12939=FACE_BOUND('',#12940,.F.);+#12940=EDGE_LOOP('',(#12941,#12942,#12948,#12955,#12960,#12967,#12972,#12977,#12982,#12988,#12993,#12997));+#12941=ORIENTED_EDGE('',*,*,#12934,.F.);+#12942=ORIENTED_EDGE('',*,*,#12943,.T.);+#12943=EDGE_CURVE('',#11871,#12944,#12946,.T.);+#12944=VERTEX_POINT('',#12945);+#12945=CARTESIAN_POINT('',(5.22,-7.2,0.75));+#12946=LINE('',#12947,#11635);+#12947=CARTESIAN_POINT('',(5.22,-6.85,0.75));+#12948=ORIENTED_EDGE('',*,*,#12949,.T.);+#12949=EDGE_CURVE('',#12944,#12950,#12952,.T.);+#12950=VERTEX_POINT('',#12951);+#12951=CARTESIAN_POINT('',(5.22,-7.298480775301,0.667364817767));+#12952=CIRCLE('',#12953,0.1);+#12953=AXIS2_PLACEMENT_3D('',#12954,#11644,#11645);+#12954=CARTESIAN_POINT('',(5.22,-7.2,0.65));+#12955=ORIENTED_EDGE('',*,*,#12956,.T.);+#12956=EDGE_CURVE('',#12950,#12957,#12959,.T.);+#12957=VERTEX_POINT('',#12958);+#12958=CARTESIAN_POINT('',(5.22,-7.382385590716,0.165270364467));+#12959=LINE('',#12951,#11651);+#12960=ORIENTED_EDGE('',*,*,#12961,.T.);+#12961=EDGE_CURVE('',#12957,#12962,#12964,.T.);+#12962=VERTEX_POINT('',#12963);+#12963=CARTESIAN_POINT('',(5.22,-7.579347141319,1.387778780781E-16));+#12964=CIRCLE('',#12965,0.2);+#12965=AXIS2_PLACEMENT_3D('',#12966,#7993,#11660);+#12966=CARTESIAN_POINT('',(5.22,-7.579347141319,0.2));+#12967=ORIENTED_EDGE('',*,*,#12968,.T.);+#12968=EDGE_CURVE('',#12962,#12969,#12971,.T.);+#12969=VERTEX_POINT('',#12970);+#12970=CARTESIAN_POINT('',(5.22,-8.,1.387778780781E-16));+#12971=LINE('',#12963,#11635);+#12972=ORIENTED_EDGE('',*,*,#12973,.T.);+#12973=EDGE_CURVE('',#12969,#12974,#12976,.T.);+#12974=VERTEX_POINT('',#12975);+#12975=CARTESIAN_POINT('',(5.22,-8.,0.1));+#12976=LINE('',#12970,#1074);+#12977=ORIENTED_EDGE('',*,*,#12978,.T.);+#12978=EDGE_CURVE('',#12974,#12979,#12981,.T.);+#12979=VERTEX_POINT('',#12980);+#12980=CARTESIAN_POINT('',(5.22,-7.579347141319,0.1));+#12981=LINE('',#12975,#3784);+#12982=ORIENTED_EDGE('',*,*,#12983,.T.);+#12983=EDGE_CURVE('',#12979,#12984,#12986,.T.);+#12984=VERTEX_POINT('',#12985);+#12985=CARTESIAN_POINT('',(5.22,-7.480866366018,0.182635182233));+#12986=CIRCLE('',#12987,1.E-01);+#12987=AXIS2_PLACEMENT_3D('',#12966,#11644,#11682);+#12988=ORIENTED_EDGE('',*,*,#12989,.T.);+#12989=EDGE_CURVE('',#12984,#12990,#12992,.T.);+#12990=VERTEX_POINT('',#12991);+#12991=CARTESIAN_POINT('',(5.22,-7.396961550602,0.684729635533));+#12992=LINE('',#12985,#11688);+#12993=ORIENTED_EDGE('',*,*,#12994,.T.);+#12994=EDGE_CURVE('',#12990,#10338,#12995,.T.);+#12995=CIRCLE('',#12996,0.2);+#12996=AXIS2_PLACEMENT_3D('',#12954,#7993,#11694);+#12997=ORIENTED_EDGE('',*,*,#10337,.T.);+#12998=PLANE('',#12999);+#12999=AXIS2_PLACEMENT_3D('',#13000,#7993,#13);+#13000=CARTESIAN_POINT('',(5.22,-7.414276639233,0.410238158856));+#13001=ADVANCED_FACE('',(#13002),#13063,.T.);+#13002=FACE_BOUND('',#13003,.T.);+#13003=EDGE_LOOP('',(#13004,#13008,#13014,#13021,#13026,#13033,#13038,#13043,#13048,#13054,#13059,#10344));+#13004=ORIENTED_EDGE('',*,*,#13005,.F.);+#13005=EDGE_CURVE('',#11867,#10346,#13006,.T.);+#13006=LINE('',#13007,#1074);+#13007=CARTESIAN_POINT('',(4.78,-7.,0.630119079428));+#13008=ORIENTED_EDGE('',*,*,#13009,.T.);+#13009=EDGE_CURVE('',#11867,#13010,#13012,.T.);+#13010=VERTEX_POINT('',#13011);+#13011=CARTESIAN_POINT('',(4.78,-7.2,0.75));+#13012=LINE('',#13013,#11635);+#13013=CARTESIAN_POINT('',(4.78,-6.85,0.75));+#13014=ORIENTED_EDGE('',*,*,#13015,.T.);+#13015=EDGE_CURVE('',#13010,#13016,#13018,.T.);+#13016=VERTEX_POINT('',#13017);+#13017=CARTESIAN_POINT('',(4.78,-7.298480775301,0.667364817767));+#13018=CIRCLE('',#13019,0.1);+#13019=AXIS2_PLACEMENT_3D('',#13020,#11644,#11645);+#13020=CARTESIAN_POINT('',(4.78,-7.2,0.65));+#13021=ORIENTED_EDGE('',*,*,#13022,.T.);+#13022=EDGE_CURVE('',#13016,#13023,#13025,.T.);+#13023=VERTEX_POINT('',#13024);+#13024=CARTESIAN_POINT('',(4.78,-7.382385590716,0.165270364467));+#13025=LINE('',#13017,#11651);+#13026=ORIENTED_EDGE('',*,*,#13027,.T.);+#13027=EDGE_CURVE('',#13023,#13028,#13030,.T.);+#13028=VERTEX_POINT('',#13029);+#13029=CARTESIAN_POINT('',(4.78,-7.579347141319,1.387778780781E-16));+#13030=CIRCLE('',#13031,0.2);+#13031=AXIS2_PLACEMENT_3D('',#13032,#7993,#11660);+#13032=CARTESIAN_POINT('',(4.78,-7.579347141319,0.2));+#13033=ORIENTED_EDGE('',*,*,#13034,.T.);+#13034=EDGE_CURVE('',#13028,#13035,#13037,.T.);+#13035=VERTEX_POINT('',#13036);+#13036=CARTESIAN_POINT('',(4.78,-8.,1.387778780781E-16));+#13037=LINE('',#13029,#11635);+#13038=ORIENTED_EDGE('',*,*,#13039,.T.);+#13039=EDGE_CURVE('',#13035,#13040,#13042,.T.);+#13040=VERTEX_POINT('',#13041);+#13041=CARTESIAN_POINT('',(4.78,-8.,0.1));+#13042=LINE('',#13036,#1074);+#13043=ORIENTED_EDGE('',*,*,#13044,.T.);+#13044=EDGE_CURVE('',#13040,#13045,#13047,.T.);+#13045=VERTEX_POINT('',#13046);+#13046=CARTESIAN_POINT('',(4.78,-7.579347141319,0.1));+#13047=LINE('',#13041,#3784);+#13048=ORIENTED_EDGE('',*,*,#13049,.T.);+#13049=EDGE_CURVE('',#13045,#13050,#13052,.T.);+#13050=VERTEX_POINT('',#13051);+#13051=CARTESIAN_POINT('',(4.78,-7.480866366018,0.182635182233));+#13052=CIRCLE('',#13053,1.E-01);+#13053=AXIS2_PLACEMENT_3D('',#13032,#11644,#11682);+#13054=ORIENTED_EDGE('',*,*,#13055,.T.);+#13055=EDGE_CURVE('',#13050,#13056,#13058,.T.);+#13056=VERTEX_POINT('',#13057);+#13057=CARTESIAN_POINT('',(4.78,-7.396961550602,0.684729635533));+#13058=LINE('',#13051,#11688);+#13059=ORIENTED_EDGE('',*,*,#13060,.T.);+#13060=EDGE_CURVE('',#13056,#10341,#13061,.T.);+#13061=CIRCLE('',#13062,0.2);+#13062=AXIS2_PLACEMENT_3D('',#13020,#7993,#11694);+#13063=PLANE('',#13064);+#13064=AXIS2_PLACEMENT_3D('',#13065,#7993,#13);+#13065=CARTESIAN_POINT('',(4.78,-7.414276639233,0.410238158856));+#13066=ADVANCED_FACE('',(#13067),#13074,.T.);+#13067=FACE_BOUND('',#13068,.F.);+#13068=EDGE_LOOP('',(#13069,#13059,#13072,#13073));+#13069=ORIENTED_EDGE('',*,*,#13070,.T.);+#13070=EDGE_CURVE('',#12990,#13056,#13071,.T.);+#13071=LINE('',#12991,#7992);+#13072=ORIENTED_EDGE('',*,*,#10340,.F.);+#13073=ORIENTED_EDGE('',*,*,#12994,.F.);+#13074=CYLINDRICAL_SURFACE('',#13075,0.2);+#13075=AXIS2_PLACEMENT_3D('',#12954,#11644,#11694);+#13076=ADVANCED_FACE('',(#13077),#8023,.F.);+#13077=FACE_BOUND('',#13078,.F.);+#13078=EDGE_LOOP('',(#13004,#13079,#13080,#13084));+#13079=ORIENTED_EDGE('',*,*,#11866,.T.);+#13080=ORIENTED_EDGE('',*,*,#13081,.T.);+#13081=EDGE_CURVE('',#11863,#10360,#13082,.T.);+#13082=LINE('',#13083,#1074);+#13083=CARTESIAN_POINT('',(4.22,-7.,0.630119079428));+#13084=ORIENTED_EDGE('',*,*,#10359,.F.);+#13085=ADVANCED_FACE('',(#13086),#13145,.F.);+#13086=FACE_BOUND('',#13087,.F.);+#13087=EDGE_LOOP('',(#13088,#13089,#13095,#13102,#13107,#13114,#13119,#13124,#13129,#13135,#13140,#13144));+#13088=ORIENTED_EDGE('',*,*,#13081,.F.);+#13089=ORIENTED_EDGE('',*,*,#13090,.T.);+#13090=EDGE_CURVE('',#11863,#13091,#13093,.T.);+#13091=VERTEX_POINT('',#13092);+#13092=CARTESIAN_POINT('',(4.22,-7.2,0.75));+#13093=LINE('',#13094,#11635);+#13094=CARTESIAN_POINT('',(4.22,-6.85,0.75));+#13095=ORIENTED_EDGE('',*,*,#13096,.T.);+#13096=EDGE_CURVE('',#13091,#13097,#13099,.T.);+#13097=VERTEX_POINT('',#13098);+#13098=CARTESIAN_POINT('',(4.22,-7.298480775301,0.667364817767));+#13099=CIRCLE('',#13100,0.1);+#13100=AXIS2_PLACEMENT_3D('',#13101,#11644,#11645);+#13101=CARTESIAN_POINT('',(4.22,-7.2,0.65));+#13102=ORIENTED_EDGE('',*,*,#13103,.T.);+#13103=EDGE_CURVE('',#13097,#13104,#13106,.T.);+#13104=VERTEX_POINT('',#13105);+#13105=CARTESIAN_POINT('',(4.22,-7.382385590716,0.165270364467));+#13106=LINE('',#13098,#11651);+#13107=ORIENTED_EDGE('',*,*,#13108,.T.);+#13108=EDGE_CURVE('',#13104,#13109,#13111,.T.);+#13109=VERTEX_POINT('',#13110);+#13110=CARTESIAN_POINT('',(4.22,-7.579347141319,1.387778780781E-16));+#13111=CIRCLE('',#13112,0.2);+#13112=AXIS2_PLACEMENT_3D('',#13113,#7993,#11660);+#13113=CARTESIAN_POINT('',(4.22,-7.579347141319,0.2));+#13114=ORIENTED_EDGE('',*,*,#13115,.T.);+#13115=EDGE_CURVE('',#13109,#13116,#13118,.T.);+#13116=VERTEX_POINT('',#13117);+#13117=CARTESIAN_POINT('',(4.22,-8.,1.387778780781E-16));+#13118=LINE('',#13110,#11635);+#13119=ORIENTED_EDGE('',*,*,#13120,.T.);+#13120=EDGE_CURVE('',#13116,#13121,#13123,.T.);+#13121=VERTEX_POINT('',#13122);+#13122=CARTESIAN_POINT('',(4.22,-8.,0.1));+#13123=LINE('',#13117,#1074);+#13124=ORIENTED_EDGE('',*,*,#13125,.T.);+#13125=EDGE_CURVE('',#13121,#13126,#13128,.T.);+#13126=VERTEX_POINT('',#13127);+#13127=CARTESIAN_POINT('',(4.22,-7.579347141319,0.1));+#13128=LINE('',#13122,#3784);+#13129=ORIENTED_EDGE('',*,*,#13130,.T.);+#13130=EDGE_CURVE('',#13126,#13131,#13133,.T.);+#13131=VERTEX_POINT('',#13132);+#13132=CARTESIAN_POINT('',(4.22,-7.480866366018,0.182635182233));+#13133=CIRCLE('',#13134,1.E-01);+#13134=AXIS2_PLACEMENT_3D('',#13113,#11644,#11682);+#13135=ORIENTED_EDGE('',*,*,#13136,.T.);+#13136=EDGE_CURVE('',#13131,#13137,#13139,.T.);+#13137=VERTEX_POINT('',#13138);+#13138=CARTESIAN_POINT('',(4.22,-7.396961550602,0.684729635533));+#13139=LINE('',#13132,#11688);+#13140=ORIENTED_EDGE('',*,*,#13141,.T.);+#13141=EDGE_CURVE('',#13137,#10373,#13142,.T.);+#13142=CIRCLE('',#13143,0.2);+#13143=AXIS2_PLACEMENT_3D('',#13101,#7993,#11694);+#13144=ORIENTED_EDGE('',*,*,#10372,.T.);+#13145=PLANE('',#13146);+#13146=AXIS2_PLACEMENT_3D('',#13147,#7993,#13);+#13147=CARTESIAN_POINT('',(4.22,-7.414276639233,0.410238158856));+#13148=ADVANCED_FACE('',(#13149),#13210,.T.);+#13149=FACE_BOUND('',#13150,.T.);+#13150=EDGE_LOOP('',(#13151,#13155,#13161,#13168,#13173,#13180,#13185,#13190,#13195,#13201,#13206,#10379));+#13151=ORIENTED_EDGE('',*,*,#13152,.F.);+#13152=EDGE_CURVE('',#11859,#10381,#13153,.T.);+#13153=LINE('',#13154,#1074);+#13154=CARTESIAN_POINT('',(3.78,-7.,0.630119079428));+#13155=ORIENTED_EDGE('',*,*,#13156,.T.);+#13156=EDGE_CURVE('',#11859,#13157,#13159,.T.);+#13157=VERTEX_POINT('',#13158);+#13158=CARTESIAN_POINT('',(3.78,-7.2,0.75));+#13159=LINE('',#13160,#11635);+#13160=CARTESIAN_POINT('',(3.78,-6.85,0.75));+#13161=ORIENTED_EDGE('',*,*,#13162,.T.);+#13162=EDGE_CURVE('',#13157,#13163,#13165,.T.);+#13163=VERTEX_POINT('',#13164);+#13164=CARTESIAN_POINT('',(3.78,-7.298480775301,0.667364817767));+#13165=CIRCLE('',#13166,0.1);+#13166=AXIS2_PLACEMENT_3D('',#13167,#11644,#11645);+#13167=CARTESIAN_POINT('',(3.78,-7.2,0.65));+#13168=ORIENTED_EDGE('',*,*,#13169,.T.);+#13169=EDGE_CURVE('',#13163,#13170,#13172,.T.);+#13170=VERTEX_POINT('',#13171);+#13171=CARTESIAN_POINT('',(3.78,-7.382385590716,0.165270364467));+#13172=LINE('',#13164,#11651);+#13173=ORIENTED_EDGE('',*,*,#13174,.T.);+#13174=EDGE_CURVE('',#13170,#13175,#13177,.T.);+#13175=VERTEX_POINT('',#13176);+#13176=CARTESIAN_POINT('',(3.78,-7.579347141319,1.387778780781E-16));+#13177=CIRCLE('',#13178,0.2);+#13178=AXIS2_PLACEMENT_3D('',#13179,#7993,#11660);+#13179=CARTESIAN_POINT('',(3.78,-7.579347141319,0.2));+#13180=ORIENTED_EDGE('',*,*,#13181,.T.);+#13181=EDGE_CURVE('',#13175,#13182,#13184,.T.);+#13182=VERTEX_POINT('',#13183);+#13183=CARTESIAN_POINT('',(3.78,-8.,1.387778780781E-16));+#13184=LINE('',#13176,#11635);+#13185=ORIENTED_EDGE('',*,*,#13186,.T.);+#13186=EDGE_CURVE('',#13182,#13187,#13189,.T.);+#13187=VERTEX_POINT('',#13188);+#13188=CARTESIAN_POINT('',(3.78,-8.,0.1));+#13189=LINE('',#13183,#1074);+#13190=ORIENTED_EDGE('',*,*,#13191,.T.);+#13191=EDGE_CURVE('',#13187,#13192,#13194,.T.);+#13192=VERTEX_POINT('',#13193);+#13193=CARTESIAN_POINT('',(3.78,-7.579347141319,0.1));+#13194=LINE('',#13188,#3784);+#13195=ORIENTED_EDGE('',*,*,#13196,.T.);+#13196=EDGE_CURVE('',#13192,#13197,#13199,.T.);+#13197=VERTEX_POINT('',#13198);+#13198=CARTESIAN_POINT('',(3.78,-7.480866366018,0.182635182233));+#13199=CIRCLE('',#13200,1.E-01);+#13200=AXIS2_PLACEMENT_3D('',#13179,#11644,#11682);+#13201=ORIENTED_EDGE('',*,*,#13202,.T.);+#13202=EDGE_CURVE('',#13197,#13203,#13205,.T.);+#13203=VERTEX_POINT('',#13204);+#13204=CARTESIAN_POINT('',(3.78,-7.396961550602,0.684729635533));+#13205=LINE('',#13198,#11688);+#13206=ORIENTED_EDGE('',*,*,#13207,.T.);+#13207=EDGE_CURVE('',#13203,#10376,#13208,.T.);+#13208=CIRCLE('',#13209,0.2);+#13209=AXIS2_PLACEMENT_3D('',#13167,#7993,#11694);+#13210=PLANE('',#13211);+#13211=AXIS2_PLACEMENT_3D('',#13212,#7993,#13);+#13212=CARTESIAN_POINT('',(3.78,-7.414276639233,0.410238158856));+#13213=ADVANCED_FACE('',(#13214),#13221,.T.);+#13214=FACE_BOUND('',#13215,.F.);+#13215=EDGE_LOOP('',(#13216,#13206,#13219,#13220));+#13216=ORIENTED_EDGE('',*,*,#13217,.T.);+#13217=EDGE_CURVE('',#13137,#13203,#13218,.T.);+#13218=LINE('',#13138,#7992);+#13219=ORIENTED_EDGE('',*,*,#10375,.F.);+#13220=ORIENTED_EDGE('',*,*,#13141,.F.);+#13221=CYLINDRICAL_SURFACE('',#13222,0.2);+#13222=AXIS2_PLACEMENT_3D('',#13101,#11644,#11694);+#13223=ADVANCED_FACE('',(#13224),#8023,.F.);+#13224=FACE_BOUND('',#13225,.F.);+#13225=EDGE_LOOP('',(#13151,#13226,#13227,#13231));+#13226=ORIENTED_EDGE('',*,*,#11858,.T.);+#13227=ORIENTED_EDGE('',*,*,#13228,.T.);+#13228=EDGE_CURVE('',#11855,#10395,#13229,.T.);+#13229=LINE('',#13230,#1074);+#13230=CARTESIAN_POINT('',(3.22,-7.,0.630119079428));+#13231=ORIENTED_EDGE('',*,*,#10394,.F.);+#13232=ADVANCED_FACE('',(#13233),#13292,.F.);+#13233=FACE_BOUND('',#13234,.F.);+#13234=EDGE_LOOP('',(#13235,#13236,#13242,#13249,#13254,#13261,#13266,#13271,#13276,#13282,#13287,#13291));+#13235=ORIENTED_EDGE('',*,*,#13228,.F.);+#13236=ORIENTED_EDGE('',*,*,#13237,.T.);+#13237=EDGE_CURVE('',#11855,#13238,#13240,.T.);+#13238=VERTEX_POINT('',#13239);+#13239=CARTESIAN_POINT('',(3.22,-7.2,0.75));+#13240=LINE('',#13241,#11635);+#13241=CARTESIAN_POINT('',(3.22,-6.85,0.75));+#13242=ORIENTED_EDGE('',*,*,#13243,.T.);+#13243=EDGE_CURVE('',#13238,#13244,#13246,.T.);+#13244=VERTEX_POINT('',#13245);+#13245=CARTESIAN_POINT('',(3.22,-7.298480775301,0.667364817767));+#13246=CIRCLE('',#13247,0.1);+#13247=AXIS2_PLACEMENT_3D('',#13248,#11644,#11645);+#13248=CARTESIAN_POINT('',(3.22,-7.2,0.65));+#13249=ORIENTED_EDGE('',*,*,#13250,.T.);+#13250=EDGE_CURVE('',#13244,#13251,#13253,.T.);+#13251=VERTEX_POINT('',#13252);+#13252=CARTESIAN_POINT('',(3.22,-7.382385590716,0.165270364467));+#13253=LINE('',#13245,#11651);+#13254=ORIENTED_EDGE('',*,*,#13255,.T.);+#13255=EDGE_CURVE('',#13251,#13256,#13258,.T.);+#13256=VERTEX_POINT('',#13257);+#13257=CARTESIAN_POINT('',(3.22,-7.579347141319,1.387778780781E-16));+#13258=CIRCLE('',#13259,0.2);+#13259=AXIS2_PLACEMENT_3D('',#13260,#7993,#11660);+#13260=CARTESIAN_POINT('',(3.22,-7.579347141319,0.2));+#13261=ORIENTED_EDGE('',*,*,#13262,.T.);+#13262=EDGE_CURVE('',#13256,#13263,#13265,.T.);+#13263=VERTEX_POINT('',#13264);+#13264=CARTESIAN_POINT('',(3.22,-8.,1.387778780781E-16));+#13265=LINE('',#13257,#11635);+#13266=ORIENTED_EDGE('',*,*,#13267,.T.);+#13267=EDGE_CURVE('',#13263,#13268,#13270,.T.);+#13268=VERTEX_POINT('',#13269);+#13269=CARTESIAN_POINT('',(3.22,-8.,0.1));+#13270=LINE('',#13264,#1074);+#13271=ORIENTED_EDGE('',*,*,#13272,.T.);+#13272=EDGE_CURVE('',#13268,#13273,#13275,.T.);+#13273=VERTEX_POINT('',#13274);+#13274=CARTESIAN_POINT('',(3.22,-7.579347141319,0.1));+#13275=LINE('',#13269,#3784);+#13276=ORIENTED_EDGE('',*,*,#13277,.T.);+#13277=EDGE_CURVE('',#13273,#13278,#13280,.T.);+#13278=VERTEX_POINT('',#13279);+#13279=CARTESIAN_POINT('',(3.22,-7.480866366018,0.182635182233));+#13280=CIRCLE('',#13281,1.E-01);+#13281=AXIS2_PLACEMENT_3D('',#13260,#11644,#11682);+#13282=ORIENTED_EDGE('',*,*,#13283,.T.);+#13283=EDGE_CURVE('',#13278,#13284,#13286,.T.);+#13284=VERTEX_POINT('',#13285);+#13285=CARTESIAN_POINT('',(3.22,-7.396961550602,0.684729635533));+#13286=LINE('',#13279,#11688);+#13287=ORIENTED_EDGE('',*,*,#13288,.T.);+#13288=EDGE_CURVE('',#13284,#10408,#13289,.T.);+#13289=CIRCLE('',#13290,0.2);+#13290=AXIS2_PLACEMENT_3D('',#13248,#7993,#11694);+#13291=ORIENTED_EDGE('',*,*,#10407,.T.);+#13292=PLANE('',#13293);+#13293=AXIS2_PLACEMENT_3D('',#13294,#7993,#13);+#13294=CARTESIAN_POINT('',(3.22,-7.414276639233,0.410238158856));+#13295=ADVANCED_FACE('',(#13296),#13357,.T.);+#13296=FACE_BOUND('',#13297,.T.);+#13297=EDGE_LOOP('',(#13298,#13302,#13308,#13315,#13320,#13327,#13332,#13337,#13342,#13348,#13353,#10414));+#13298=ORIENTED_EDGE('',*,*,#13299,.F.);+#13299=EDGE_CURVE('',#11851,#10416,#13300,.T.);+#13300=LINE('',#13301,#1074);+#13301=CARTESIAN_POINT('',(2.78,-7.,0.630119079428));+#13302=ORIENTED_EDGE('',*,*,#13303,.T.);+#13303=EDGE_CURVE('',#11851,#13304,#13306,.T.);+#13304=VERTEX_POINT('',#13305);+#13305=CARTESIAN_POINT('',(2.78,-7.2,0.75));+#13306=LINE('',#13307,#11635);+#13307=CARTESIAN_POINT('',(2.78,-6.85,0.75));+#13308=ORIENTED_EDGE('',*,*,#13309,.T.);+#13309=EDGE_CURVE('',#13304,#13310,#13312,.T.);+#13310=VERTEX_POINT('',#13311);+#13311=CARTESIAN_POINT('',(2.78,-7.298480775301,0.667364817767));+#13312=CIRCLE('',#13313,0.1);+#13313=AXIS2_PLACEMENT_3D('',#13314,#11644,#11645);+#13314=CARTESIAN_POINT('',(2.78,-7.2,0.65));+#13315=ORIENTED_EDGE('',*,*,#13316,.T.);+#13316=EDGE_CURVE('',#13310,#13317,#13319,.T.);+#13317=VERTEX_POINT('',#13318);+#13318=CARTESIAN_POINT('',(2.78,-7.382385590716,0.165270364467));+#13319=LINE('',#13311,#11651);+#13320=ORIENTED_EDGE('',*,*,#13321,.T.);+#13321=EDGE_CURVE('',#13317,#13322,#13324,.T.);+#13322=VERTEX_POINT('',#13323);+#13323=CARTESIAN_POINT('',(2.78,-7.579347141319,1.387778780781E-16));+#13324=CIRCLE('',#13325,0.2);+#13325=AXIS2_PLACEMENT_3D('',#13326,#7993,#11660);+#13326=CARTESIAN_POINT('',(2.78,-7.579347141319,0.2));+#13327=ORIENTED_EDGE('',*,*,#13328,.T.);+#13328=EDGE_CURVE('',#13322,#13329,#13331,.T.);+#13329=VERTEX_POINT('',#13330);+#13330=CARTESIAN_POINT('',(2.78,-8.,1.387778780781E-16));+#13331=LINE('',#13323,#11635);+#13332=ORIENTED_EDGE('',*,*,#13333,.T.);+#13333=EDGE_CURVE('',#13329,#13334,#13336,.T.);+#13334=VERTEX_POINT('',#13335);+#13335=CARTESIAN_POINT('',(2.78,-8.,0.1));+#13336=LINE('',#13330,#1074);+#13337=ORIENTED_EDGE('',*,*,#13338,.T.);+#13338=EDGE_CURVE('',#13334,#13339,#13341,.T.);+#13339=VERTEX_POINT('',#13340);+#13340=CARTESIAN_POINT('',(2.78,-7.579347141319,0.1));+#13341=LINE('',#13335,#3784);+#13342=ORIENTED_EDGE('',*,*,#13343,.T.);+#13343=EDGE_CURVE('',#13339,#13344,#13346,.T.);+#13344=VERTEX_POINT('',#13345);+#13345=CARTESIAN_POINT('',(2.78,-7.480866366018,0.182635182233));+#13346=CIRCLE('',#13347,1.E-01);+#13347=AXIS2_PLACEMENT_3D('',#13326,#11644,#11682);+#13348=ORIENTED_EDGE('',*,*,#13349,.T.);+#13349=EDGE_CURVE('',#13344,#13350,#13352,.T.);+#13350=VERTEX_POINT('',#13351);+#13351=CARTESIAN_POINT('',(2.78,-7.396961550602,0.684729635533));+#13352=LINE('',#13345,#11688);+#13353=ORIENTED_EDGE('',*,*,#13354,.T.);+#13354=EDGE_CURVE('',#13350,#10411,#13355,.T.);+#13355=CIRCLE('',#13356,0.2);+#13356=AXIS2_PLACEMENT_3D('',#13314,#7993,#11694);+#13357=PLANE('',#13358);+#13358=AXIS2_PLACEMENT_3D('',#13359,#7993,#13);+#13359=CARTESIAN_POINT('',(2.78,-7.414276639233,0.410238158856));+#13360=ADVANCED_FACE('',(#13361),#13368,.T.);+#13361=FACE_BOUND('',#13362,.F.);+#13362=EDGE_LOOP('',(#13363,#13353,#13366,#13367));+#13363=ORIENTED_EDGE('',*,*,#13364,.T.);+#13364=EDGE_CURVE('',#13284,#13350,#13365,.T.);+#13365=LINE('',#13285,#7992);+#13366=ORIENTED_EDGE('',*,*,#10410,.F.);+#13367=ORIENTED_EDGE('',*,*,#13288,.F.);+#13368=CYLINDRICAL_SURFACE('',#13369,0.2);+#13369=AXIS2_PLACEMENT_3D('',#13248,#11644,#11694);+#13370=ADVANCED_FACE('',(#13371),#8023,.F.);+#13371=FACE_BOUND('',#13372,.F.);+#13372=EDGE_LOOP('',(#13298,#13373,#13374,#13378));+#13373=ORIENTED_EDGE('',*,*,#11850,.T.);+#13374=ORIENTED_EDGE('',*,*,#13375,.T.);+#13375=EDGE_CURVE('',#11847,#10430,#13376,.T.);+#13376=LINE('',#13377,#1074);+#13377=CARTESIAN_POINT('',(2.22,-7.,0.630119079428));+#13378=ORIENTED_EDGE('',*,*,#10429,.F.);+#13379=ADVANCED_FACE('',(#13380),#13439,.F.);+#13380=FACE_BOUND('',#13381,.F.);+#13381=EDGE_LOOP('',(#13382,#13383,#13389,#13396,#13401,#13408,#13413,#13418,#13423,#13429,#13434,#13438));+#13382=ORIENTED_EDGE('',*,*,#13375,.F.);+#13383=ORIENTED_EDGE('',*,*,#13384,.T.);+#13384=EDGE_CURVE('',#11847,#13385,#13387,.T.);+#13385=VERTEX_POINT('',#13386);+#13386=CARTESIAN_POINT('',(2.22,-7.2,0.75));+#13387=LINE('',#13388,#11635);+#13388=CARTESIAN_POINT('',(2.22,-6.85,0.75));+#13389=ORIENTED_EDGE('',*,*,#13390,.T.);+#13390=EDGE_CURVE('',#13385,#13391,#13393,.T.);+#13391=VERTEX_POINT('',#13392);+#13392=CARTESIAN_POINT('',(2.22,-7.298480775301,0.667364817767));+#13393=CIRCLE('',#13394,0.1);+#13394=AXIS2_PLACEMENT_3D('',#13395,#11644,#11645);+#13395=CARTESIAN_POINT('',(2.22,-7.2,0.65));+#13396=ORIENTED_EDGE('',*,*,#13397,.T.);+#13397=EDGE_CURVE('',#13391,#13398,#13400,.T.);+#13398=VERTEX_POINT('',#13399);+#13399=CARTESIAN_POINT('',(2.22,-7.382385590716,0.165270364467));+#13400=LINE('',#13392,#11651);+#13401=ORIENTED_EDGE('',*,*,#13402,.T.);+#13402=EDGE_CURVE('',#13398,#13403,#13405,.T.);+#13403=VERTEX_POINT('',#13404);+#13404=CARTESIAN_POINT('',(2.22,-7.579347141319,1.387778780781E-16));+#13405=CIRCLE('',#13406,0.2);+#13406=AXIS2_PLACEMENT_3D('',#13407,#7993,#11660);+#13407=CARTESIAN_POINT('',(2.22,-7.579347141319,0.2));+#13408=ORIENTED_EDGE('',*,*,#13409,.T.);+#13409=EDGE_CURVE('',#13403,#13410,#13412,.T.);+#13410=VERTEX_POINT('',#13411);+#13411=CARTESIAN_POINT('',(2.22,-8.,1.387778780781E-16));+#13412=LINE('',#13404,#11635);+#13413=ORIENTED_EDGE('',*,*,#13414,.T.);+#13414=EDGE_CURVE('',#13410,#13415,#13417,.T.);+#13415=VERTEX_POINT('',#13416);+#13416=CARTESIAN_POINT('',(2.22,-8.,0.1));+#13417=LINE('',#13411,#1074);+#13418=ORIENTED_EDGE('',*,*,#13419,.T.);+#13419=EDGE_CURVE('',#13415,#13420,#13422,.T.);+#13420=VERTEX_POINT('',#13421);+#13421=CARTESIAN_POINT('',(2.22,-7.579347141319,0.1));+#13422=LINE('',#13416,#3784);+#13423=ORIENTED_EDGE('',*,*,#13424,.T.);+#13424=EDGE_CURVE('',#13420,#13425,#13427,.T.);+#13425=VERTEX_POINT('',#13426);+#13426=CARTESIAN_POINT('',(2.22,-7.480866366018,0.182635182233));+#13427=CIRCLE('',#13428,1.E-01);+#13428=AXIS2_PLACEMENT_3D('',#13407,#11644,#11682);+#13429=ORIENTED_EDGE('',*,*,#13430,.T.);+#13430=EDGE_CURVE('',#13425,#13431,#13433,.T.);+#13431=VERTEX_POINT('',#13432);+#13432=CARTESIAN_POINT('',(2.22,-7.396961550602,0.684729635533));+#13433=LINE('',#13426,#11688);+#13434=ORIENTED_EDGE('',*,*,#13435,.T.);+#13435=EDGE_CURVE('',#13431,#10443,#13436,.T.);+#13436=CIRCLE('',#13437,0.2);+#13437=AXIS2_PLACEMENT_3D('',#13395,#7993,#11694);+#13438=ORIENTED_EDGE('',*,*,#10442,.T.);+#13439=PLANE('',#13440);+#13440=AXIS2_PLACEMENT_3D('',#13441,#7993,#13);+#13441=CARTESIAN_POINT('',(2.22,-7.414276639233,0.410238158856));+#13442=ADVANCED_FACE('',(#13443),#13504,.T.);+#13443=FACE_BOUND('',#13444,.T.);+#13444=EDGE_LOOP('',(#13445,#13449,#13455,#13462,#13467,#13474,#13479,#13484,#13489,#13495,#13500,#10449));+#13445=ORIENTED_EDGE('',*,*,#13446,.F.);+#13446=EDGE_CURVE('',#11843,#10451,#13447,.T.);+#13447=LINE('',#13448,#1074);+#13448=CARTESIAN_POINT('',(1.78,-7.,0.630119079428));+#13449=ORIENTED_EDGE('',*,*,#13450,.T.);+#13450=EDGE_CURVE('',#11843,#13451,#13453,.T.);+#13451=VERTEX_POINT('',#13452);+#13452=CARTESIAN_POINT('',(1.78,-7.2,0.75));+#13453=LINE('',#13454,#11635);+#13454=CARTESIAN_POINT('',(1.78,-6.85,0.75));+#13455=ORIENTED_EDGE('',*,*,#13456,.T.);+#13456=EDGE_CURVE('',#13451,#13457,#13459,.T.);+#13457=VERTEX_POINT('',#13458);+#13458=CARTESIAN_POINT('',(1.78,-7.298480775301,0.667364817767));+#13459=CIRCLE('',#13460,0.1);+#13460=AXIS2_PLACEMENT_3D('',#13461,#11644,#11645);+#13461=CARTESIAN_POINT('',(1.78,-7.2,0.65));+#13462=ORIENTED_EDGE('',*,*,#13463,.T.);+#13463=EDGE_CURVE('',#13457,#13464,#13466,.T.);+#13464=VERTEX_POINT('',#13465);+#13465=CARTESIAN_POINT('',(1.78,-7.382385590716,0.165270364467));+#13466=LINE('',#13458,#11651);+#13467=ORIENTED_EDGE('',*,*,#13468,.T.);+#13468=EDGE_CURVE('',#13464,#13469,#13471,.T.);+#13469=VERTEX_POINT('',#13470);+#13470=CARTESIAN_POINT('',(1.78,-7.579347141319,1.387778780781E-16));+#13471=CIRCLE('',#13472,0.2);+#13472=AXIS2_PLACEMENT_3D('',#13473,#7993,#11660);+#13473=CARTESIAN_POINT('',(1.78,-7.579347141319,0.2));+#13474=ORIENTED_EDGE('',*,*,#13475,.T.);+#13475=EDGE_CURVE('',#13469,#13476,#13478,.T.);+#13476=VERTEX_POINT('',#13477);+#13477=CARTESIAN_POINT('',(1.78,-8.,1.387778780781E-16));+#13478=LINE('',#13470,#11635);+#13479=ORIENTED_EDGE('',*,*,#13480,.T.);+#13480=EDGE_CURVE('',#13476,#13481,#13483,.T.);+#13481=VERTEX_POINT('',#13482);+#13482=CARTESIAN_POINT('',(1.78,-8.,0.1));+#13483=LINE('',#13477,#1074);+#13484=ORIENTED_EDGE('',*,*,#13485,.T.);+#13485=EDGE_CURVE('',#13481,#13486,#13488,.T.);+#13486=VERTEX_POINT('',#13487);+#13487=CARTESIAN_POINT('',(1.78,-7.579347141319,0.1));+#13488=LINE('',#13482,#3784);+#13489=ORIENTED_EDGE('',*,*,#13490,.T.);+#13490=EDGE_CURVE('',#13486,#13491,#13493,.T.);+#13491=VERTEX_POINT('',#13492);+#13492=CARTESIAN_POINT('',(1.78,-7.480866366018,0.182635182233));+#13493=CIRCLE('',#13494,1.E-01);+#13494=AXIS2_PLACEMENT_3D('',#13473,#11644,#11682);+#13495=ORIENTED_EDGE('',*,*,#13496,.T.);+#13496=EDGE_CURVE('',#13491,#13497,#13499,.T.);+#13497=VERTEX_POINT('',#13498);+#13498=CARTESIAN_POINT('',(1.78,-7.396961550602,0.684729635533));+#13499=LINE('',#13492,#11688);+#13500=ORIENTED_EDGE('',*,*,#13501,.T.);+#13501=EDGE_CURVE('',#13497,#10446,#13502,.T.);+#13502=CIRCLE('',#13503,0.2);+#13503=AXIS2_PLACEMENT_3D('',#13461,#7993,#11694);+#13504=PLANE('',#13505);+#13505=AXIS2_PLACEMENT_3D('',#13506,#7993,#13);+#13506=CARTESIAN_POINT('',(1.78,-7.414276639233,0.410238158856));+#13507=ADVANCED_FACE('',(#13508),#13515,.T.);+#13508=FACE_BOUND('',#13509,.F.);+#13509=EDGE_LOOP('',(#13510,#13500,#13513,#13514));+#13510=ORIENTED_EDGE('',*,*,#13511,.T.);+#13511=EDGE_CURVE('',#13431,#13497,#13512,.T.);+#13512=LINE('',#13432,#7992);+#13513=ORIENTED_EDGE('',*,*,#10445,.F.);+#13514=ORIENTED_EDGE('',*,*,#13435,.F.);+#13515=CYLINDRICAL_SURFACE('',#13516,0.2);+#13516=AXIS2_PLACEMENT_3D('',#13395,#11644,#11694);+#13517=ADVANCED_FACE('',(#13518),#8023,.F.);+#13518=FACE_BOUND('',#13519,.F.);+#13519=EDGE_LOOP('',(#13445,#13520,#13521,#13525));+#13520=ORIENTED_EDGE('',*,*,#11842,.T.);+#13521=ORIENTED_EDGE('',*,*,#13522,.T.);+#13522=EDGE_CURVE('',#11839,#10465,#13523,.T.);+#13523=LINE('',#13524,#1074);+#13524=CARTESIAN_POINT('',(1.22,-7.,0.630119079428));+#13525=ORIENTED_EDGE('',*,*,#10464,.F.);+#13526=ADVANCED_FACE('',(#13527),#13586,.F.);+#13527=FACE_BOUND('',#13528,.F.);+#13528=EDGE_LOOP('',(#13529,#13530,#13536,#13543,#13548,#13555,#13560,#13565,#13570,#13576,#13581,#13585));+#13529=ORIENTED_EDGE('',*,*,#13522,.F.);+#13530=ORIENTED_EDGE('',*,*,#13531,.T.);+#13531=EDGE_CURVE('',#11839,#13532,#13534,.T.);+#13532=VERTEX_POINT('',#13533);+#13533=CARTESIAN_POINT('',(1.22,-7.2,0.75));+#13534=LINE('',#13535,#11635);+#13535=CARTESIAN_POINT('',(1.22,-6.85,0.75));+#13536=ORIENTED_EDGE('',*,*,#13537,.T.);+#13537=EDGE_CURVE('',#13532,#13538,#13540,.T.);+#13538=VERTEX_POINT('',#13539);+#13539=CARTESIAN_POINT('',(1.22,-7.298480775301,0.667364817767));+#13540=CIRCLE('',#13541,0.1);+#13541=AXIS2_PLACEMENT_3D('',#13542,#11644,#11645);+#13542=CARTESIAN_POINT('',(1.22,-7.2,0.65));+#13543=ORIENTED_EDGE('',*,*,#13544,.T.);+#13544=EDGE_CURVE('',#13538,#13545,#13547,.T.);+#13545=VERTEX_POINT('',#13546);+#13546=CARTESIAN_POINT('',(1.22,-7.382385590716,0.165270364467));+#13547=LINE('',#13539,#11651);+#13548=ORIENTED_EDGE('',*,*,#13549,.T.);+#13549=EDGE_CURVE('',#13545,#13550,#13552,.T.);+#13550=VERTEX_POINT('',#13551);+#13551=CARTESIAN_POINT('',(1.22,-7.579347141319,1.387778780781E-16));+#13552=CIRCLE('',#13553,0.2);+#13553=AXIS2_PLACEMENT_3D('',#13554,#7993,#11660);+#13554=CARTESIAN_POINT('',(1.22,-7.579347141319,0.2));+#13555=ORIENTED_EDGE('',*,*,#13556,.T.);+#13556=EDGE_CURVE('',#13550,#13557,#13559,.T.);+#13557=VERTEX_POINT('',#13558);+#13558=CARTESIAN_POINT('',(1.22,-8.,1.387778780781E-16));+#13559=LINE('',#13551,#11635);+#13560=ORIENTED_EDGE('',*,*,#13561,.T.);+#13561=EDGE_CURVE('',#13557,#13562,#13564,.T.);+#13562=VERTEX_POINT('',#13563);+#13563=CARTESIAN_POINT('',(1.22,-8.,0.1));+#13564=LINE('',#13558,#1074);+#13565=ORIENTED_EDGE('',*,*,#13566,.T.);+#13566=EDGE_CURVE('',#13562,#13567,#13569,.T.);+#13567=VERTEX_POINT('',#13568);+#13568=CARTESIAN_POINT('',(1.22,-7.579347141319,0.1));+#13569=LINE('',#13563,#3784);+#13570=ORIENTED_EDGE('',*,*,#13571,.T.);+#13571=EDGE_CURVE('',#13567,#13572,#13574,.T.);+#13572=VERTEX_POINT('',#13573);+#13573=CARTESIAN_POINT('',(1.22,-7.480866366018,0.182635182233));+#13574=CIRCLE('',#13575,1.E-01);+#13575=AXIS2_PLACEMENT_3D('',#13554,#11644,#11682);+#13576=ORIENTED_EDGE('',*,*,#13577,.T.);+#13577=EDGE_CURVE('',#13572,#13578,#13580,.T.);+#13578=VERTEX_POINT('',#13579);+#13579=CARTESIAN_POINT('',(1.22,-7.396961550602,0.684729635533));+#13580=LINE('',#13573,#11688);+#13581=ORIENTED_EDGE('',*,*,#13582,.T.);+#13582=EDGE_CURVE('',#13578,#10478,#13583,.T.);+#13583=CIRCLE('',#13584,0.2);+#13584=AXIS2_PLACEMENT_3D('',#13542,#7993,#11694);+#13585=ORIENTED_EDGE('',*,*,#10477,.T.);+#13586=PLANE('',#13587);+#13587=AXIS2_PLACEMENT_3D('',#13588,#7993,#13);+#13588=CARTESIAN_POINT('',(1.22,-7.414276639233,0.410238158856));+#13589=ADVANCED_FACE('',(#13590),#13651,.T.);+#13590=FACE_BOUND('',#13591,.T.);+#13591=EDGE_LOOP('',(#13592,#13596,#13602,#13609,#13614,#13621,#13626,#13631,#13636,#13642,#13647,#10484));+#13592=ORIENTED_EDGE('',*,*,#13593,.F.);+#13593=EDGE_CURVE('',#11835,#10486,#13594,.T.);+#13594=LINE('',#13595,#1074);+#13595=CARTESIAN_POINT('',(0.78,-7.,0.630119079428));+#13596=ORIENTED_EDGE('',*,*,#13597,.T.);+#13597=EDGE_CURVE('',#11835,#13598,#13600,.T.);+#13598=VERTEX_POINT('',#13599);+#13599=CARTESIAN_POINT('',(0.78,-7.2,0.75));+#13600=LINE('',#13601,#11635);+#13601=CARTESIAN_POINT('',(0.78,-6.85,0.75));+#13602=ORIENTED_EDGE('',*,*,#13603,.T.);+#13603=EDGE_CURVE('',#13598,#13604,#13606,.T.);+#13604=VERTEX_POINT('',#13605);+#13605=CARTESIAN_POINT('',(0.78,-7.298480775301,0.667364817767));+#13606=CIRCLE('',#13607,0.1);+#13607=AXIS2_PLACEMENT_3D('',#13608,#11644,#11645);+#13608=CARTESIAN_POINT('',(0.78,-7.2,0.65));+#13609=ORIENTED_EDGE('',*,*,#13610,.T.);+#13610=EDGE_CURVE('',#13604,#13611,#13613,.T.);+#13611=VERTEX_POINT('',#13612);+#13612=CARTESIAN_POINT('',(0.78,-7.382385590716,0.165270364467));+#13613=LINE('',#13605,#11651);+#13614=ORIENTED_EDGE('',*,*,#13615,.T.);+#13615=EDGE_CURVE('',#13611,#13616,#13618,.T.);+#13616=VERTEX_POINT('',#13617);+#13617=CARTESIAN_POINT('',(0.78,-7.579347141319,1.387778780781E-16));+#13618=CIRCLE('',#13619,0.2);+#13619=AXIS2_PLACEMENT_3D('',#13620,#7993,#11660);+#13620=CARTESIAN_POINT('',(0.78,-7.579347141319,0.2));+#13621=ORIENTED_EDGE('',*,*,#13622,.T.);+#13622=EDGE_CURVE('',#13616,#13623,#13625,.T.);+#13623=VERTEX_POINT('',#13624);+#13624=CARTESIAN_POINT('',(0.78,-8.,1.387778780781E-16));+#13625=LINE('',#13617,#11635);+#13626=ORIENTED_EDGE('',*,*,#13627,.T.);+#13627=EDGE_CURVE('',#13623,#13628,#13630,.T.);+#13628=VERTEX_POINT('',#13629);+#13629=CARTESIAN_POINT('',(0.78,-8.,0.1));+#13630=LINE('',#13624,#1074);+#13631=ORIENTED_EDGE('',*,*,#13632,.T.);+#13632=EDGE_CURVE('',#13628,#13633,#13635,.T.);+#13633=VERTEX_POINT('',#13634);+#13634=CARTESIAN_POINT('',(0.78,-7.579347141319,0.1));+#13635=LINE('',#13629,#3784);+#13636=ORIENTED_EDGE('',*,*,#13637,.T.);+#13637=EDGE_CURVE('',#13633,#13638,#13640,.T.);+#13638=VERTEX_POINT('',#13639);+#13639=CARTESIAN_POINT('',(0.78,-7.480866366018,0.182635182233));+#13640=CIRCLE('',#13641,1.E-01);+#13641=AXIS2_PLACEMENT_3D('',#13620,#11644,#11682);+#13642=ORIENTED_EDGE('',*,*,#13643,.T.);+#13643=EDGE_CURVE('',#13638,#13644,#13646,.T.);+#13644=VERTEX_POINT('',#13645);+#13645=CARTESIAN_POINT('',(0.78,-7.396961550602,0.684729635533));+#13646=LINE('',#13639,#11688);+#13647=ORIENTED_EDGE('',*,*,#13648,.T.);+#13648=EDGE_CURVE('',#13644,#10481,#13649,.T.);+#13649=CIRCLE('',#13650,0.2);+#13650=AXIS2_PLACEMENT_3D('',#13608,#7993,#11694);+#13651=PLANE('',#13652);+#13652=AXIS2_PLACEMENT_3D('',#13653,#7993,#13);+#13653=CARTESIAN_POINT('',(0.78,-7.414276639233,0.410238158856));+#13654=ADVANCED_FACE('',(#13655),#13662,.T.);+#13655=FACE_BOUND('',#13656,.F.);+#13656=EDGE_LOOP('',(#13657,#13647,#13660,#13661));+#13657=ORIENTED_EDGE('',*,*,#13658,.T.);+#13658=EDGE_CURVE('',#13578,#13644,#13659,.T.);+#13659=LINE('',#13579,#7992);+#13660=ORIENTED_EDGE('',*,*,#10480,.F.);+#13661=ORIENTED_EDGE('',*,*,#13582,.F.);+#13662=CYLINDRICAL_SURFACE('',#13663,0.2);+#13663=AXIS2_PLACEMENT_3D('',#13542,#11644,#11694);+#13664=ADVANCED_FACE('',(#13665),#8023,.F.);+#13665=FACE_BOUND('',#13666,.F.);+#13666=EDGE_LOOP('',(#13592,#13667,#13668,#13672));+#13667=ORIENTED_EDGE('',*,*,#11834,.T.);+#13668=ORIENTED_EDGE('',*,*,#13669,.T.);+#13669=EDGE_CURVE('',#11831,#10500,#13670,.T.);+#13670=LINE('',#13671,#1074);+#13671=CARTESIAN_POINT('',(0.22,-7.,0.630119079428));+#13672=ORIENTED_EDGE('',*,*,#10499,.F.);+#13673=ADVANCED_FACE('',(#13674),#13733,.F.);+#13674=FACE_BOUND('',#13675,.F.);+#13675=EDGE_LOOP('',(#13676,#13677,#13683,#13690,#13695,#13702,#13707,#13712,#13717,#13723,#13728,#13732));+#13676=ORIENTED_EDGE('',*,*,#13669,.F.);+#13677=ORIENTED_EDGE('',*,*,#13678,.T.);+#13678=EDGE_CURVE('',#11831,#13679,#13681,.T.);+#13679=VERTEX_POINT('',#13680);+#13680=CARTESIAN_POINT('',(0.22,-7.2,0.75));+#13681=LINE('',#13682,#11635);+#13682=CARTESIAN_POINT('',(0.22,-6.85,0.75));+#13683=ORIENTED_EDGE('',*,*,#13684,.T.);+#13684=EDGE_CURVE('',#13679,#13685,#13687,.T.);+#13685=VERTEX_POINT('',#13686);+#13686=CARTESIAN_POINT('',(0.22,-7.298480775301,0.667364817767));+#13687=CIRCLE('',#13688,0.1);+#13688=AXIS2_PLACEMENT_3D('',#13689,#11644,#11645);+#13689=CARTESIAN_POINT('',(0.22,-7.2,0.65));+#13690=ORIENTED_EDGE('',*,*,#13691,.T.);+#13691=EDGE_CURVE('',#13685,#13692,#13694,.T.);+#13692=VERTEX_POINT('',#13693);+#13693=CARTESIAN_POINT('',(0.22,-7.382385590716,0.165270364467));+#13694=LINE('',#13686,#11651);+#13695=ORIENTED_EDGE('',*,*,#13696,.T.);+#13696=EDGE_CURVE('',#13692,#13697,#13699,.T.);+#13697=VERTEX_POINT('',#13698);+#13698=CARTESIAN_POINT('',(0.22,-7.579347141319,1.387778780781E-16));+#13699=CIRCLE('',#13700,0.2);+#13700=AXIS2_PLACEMENT_3D('',#13701,#7993,#11660);+#13701=CARTESIAN_POINT('',(0.22,-7.579347141319,0.2));+#13702=ORIENTED_EDGE('',*,*,#13703,.T.);+#13703=EDGE_CURVE('',#13697,#13704,#13706,.T.);+#13704=VERTEX_POINT('',#13705);+#13705=CARTESIAN_POINT('',(0.22,-8.,1.387778780781E-16));+#13706=LINE('',#13698,#11635);+#13707=ORIENTED_EDGE('',*,*,#13708,.T.);+#13708=EDGE_CURVE('',#13704,#13709,#13711,.T.);+#13709=VERTEX_POINT('',#13710);+#13710=CARTESIAN_POINT('',(0.22,-8.,0.1));+#13711=LINE('',#13705,#1074);+#13712=ORIENTED_EDGE('',*,*,#13713,.T.);+#13713=EDGE_CURVE('',#13709,#13714,#13716,.T.);+#13714=VERTEX_POINT('',#13715);+#13715=CARTESIAN_POINT('',(0.22,-7.579347141319,0.1));+#13716=LINE('',#13710,#3784);+#13717=ORIENTED_EDGE('',*,*,#13718,.T.);+#13718=EDGE_CURVE('',#13714,#13719,#13721,.T.);+#13719=VERTEX_POINT('',#13720);+#13720=CARTESIAN_POINT('',(0.22,-7.480866366018,0.182635182233));+#13721=CIRCLE('',#13722,1.E-01);+#13722=AXIS2_PLACEMENT_3D('',#13701,#11644,#11682);+#13723=ORIENTED_EDGE('',*,*,#13724,.T.);+#13724=EDGE_CURVE('',#13719,#13725,#13727,.T.);+#13725=VERTEX_POINT('',#13726);+#13726=CARTESIAN_POINT('',(0.22,-7.396961550602,0.684729635533));+#13727=LINE('',#13720,#11688);+#13728=ORIENTED_EDGE('',*,*,#13729,.T.);+#13729=EDGE_CURVE('',#13725,#10513,#13730,.T.);+#13730=CIRCLE('',#13731,0.2);+#13731=AXIS2_PLACEMENT_3D('',#13689,#7993,#11694);+#13732=ORIENTED_EDGE('',*,*,#10512,.T.);+#13733=PLANE('',#13734);+#13734=AXIS2_PLACEMENT_3D('',#13735,#7993,#13);+#13735=CARTESIAN_POINT('',(0.22,-7.414276639233,0.410238158856));+#13736=ADVANCED_FACE('',(#13737),#13798,.T.);+#13737=FACE_BOUND('',#13738,.T.);+#13738=EDGE_LOOP('',(#13739,#13743,#13749,#13756,#13761,#13768,#13773,#13778,#13783,#13789,#13794,#10519));+#13739=ORIENTED_EDGE('',*,*,#13740,.F.);+#13740=EDGE_CURVE('',#11827,#10521,#13741,.T.);+#13741=LINE('',#13742,#1074);+#13742=CARTESIAN_POINT('',(-0.22,-7.,0.630119079428));+#13743=ORIENTED_EDGE('',*,*,#13744,.T.);+#13744=EDGE_CURVE('',#11827,#13745,#13747,.T.);+#13745=VERTEX_POINT('',#13746);+#13746=CARTESIAN_POINT('',(-0.22,-7.2,0.75));+#13747=LINE('',#13748,#11635);+#13748=CARTESIAN_POINT('',(-0.22,-6.85,0.75));+#13749=ORIENTED_EDGE('',*,*,#13750,.T.);+#13750=EDGE_CURVE('',#13745,#13751,#13753,.T.);+#13751=VERTEX_POINT('',#13752);+#13752=CARTESIAN_POINT('',(-0.22,-7.298480775301,0.667364817767));+#13753=CIRCLE('',#13754,0.1);+#13754=AXIS2_PLACEMENT_3D('',#13755,#11644,#11645);+#13755=CARTESIAN_POINT('',(-0.22,-7.2,0.65));+#13756=ORIENTED_EDGE('',*,*,#13757,.T.);+#13757=EDGE_CURVE('',#13751,#13758,#13760,.T.);+#13758=VERTEX_POINT('',#13759);+#13759=CARTESIAN_POINT('',(-0.22,-7.382385590716,0.165270364467));+#13760=LINE('',#13752,#11651);+#13761=ORIENTED_EDGE('',*,*,#13762,.T.);+#13762=EDGE_CURVE('',#13758,#13763,#13765,.T.);+#13763=VERTEX_POINT('',#13764);+#13764=CARTESIAN_POINT('',(-0.22,-7.579347141319,1.387778780781E-16));+#13765=CIRCLE('',#13766,0.2);+#13766=AXIS2_PLACEMENT_3D('',#13767,#7993,#11660);+#13767=CARTESIAN_POINT('',(-0.22,-7.579347141319,0.2));+#13768=ORIENTED_EDGE('',*,*,#13769,.T.);+#13769=EDGE_CURVE('',#13763,#13770,#13772,.T.);+#13770=VERTEX_POINT('',#13771);+#13771=CARTESIAN_POINT('',(-0.22,-8.,1.387778780781E-16));+#13772=LINE('',#13764,#11635);+#13773=ORIENTED_EDGE('',*,*,#13774,.T.);+#13774=EDGE_CURVE('',#13770,#13775,#13777,.T.);+#13775=VERTEX_POINT('',#13776);+#13776=CARTESIAN_POINT('',(-0.22,-8.,0.1));+#13777=LINE('',#13771,#1074);+#13778=ORIENTED_EDGE('',*,*,#13779,.T.);+#13779=EDGE_CURVE('',#13775,#13780,#13782,.T.);+#13780=VERTEX_POINT('',#13781);+#13781=CARTESIAN_POINT('',(-0.22,-7.579347141319,0.1));+#13782=LINE('',#13776,#3784);+#13783=ORIENTED_EDGE('',*,*,#13784,.T.);+#13784=EDGE_CURVE('',#13780,#13785,#13787,.T.);+#13785=VERTEX_POINT('',#13786);+#13786=CARTESIAN_POINT('',(-0.22,-7.480866366018,0.182635182233));+#13787=CIRCLE('',#13788,1.E-01);+#13788=AXIS2_PLACEMENT_3D('',#13767,#11644,#11682);+#13789=ORIENTED_EDGE('',*,*,#13790,.T.);+#13790=EDGE_CURVE('',#13785,#13791,#13793,.T.);+#13791=VERTEX_POINT('',#13792);+#13792=CARTESIAN_POINT('',(-0.22,-7.396961550602,0.684729635533));+#13793=LINE('',#13786,#11688);+#13794=ORIENTED_EDGE('',*,*,#13795,.T.);+#13795=EDGE_CURVE('',#13791,#10516,#13796,.T.);+#13796=CIRCLE('',#13797,0.2);+#13797=AXIS2_PLACEMENT_3D('',#13755,#7993,#11694);+#13798=PLANE('',#13799);+#13799=AXIS2_PLACEMENT_3D('',#13800,#7993,#13);+#13800=CARTESIAN_POINT('',(-0.22,-7.414276639233,0.410238158856));+#13801=ADVANCED_FACE('',(#13802),#13809,.T.);+#13802=FACE_BOUND('',#13803,.F.);+#13803=EDGE_LOOP('',(#13804,#13794,#13807,#13808));+#13804=ORIENTED_EDGE('',*,*,#13805,.T.);+#13805=EDGE_CURVE('',#13725,#13791,#13806,.T.);+#13806=LINE('',#13726,#7992);+#13807=ORIENTED_EDGE('',*,*,#10515,.F.);+#13808=ORIENTED_EDGE('',*,*,#13729,.F.);+#13809=CYLINDRICAL_SURFACE('',#13810,0.2);+#13810=AXIS2_PLACEMENT_3D('',#13689,#11644,#11694);+#13811=ADVANCED_FACE('',(#13812),#8023,.F.);+#13812=FACE_BOUND('',#13813,.F.);+#13813=EDGE_LOOP('',(#13739,#13814,#13815,#13819));+#13814=ORIENTED_EDGE('',*,*,#11826,.T.);+#13815=ORIENTED_EDGE('',*,*,#13816,.T.);+#13816=EDGE_CURVE('',#11823,#10535,#13817,.T.);+#13817=LINE('',#13818,#1074);+#13818=CARTESIAN_POINT('',(-0.78,-7.,0.630119079428));+#13819=ORIENTED_EDGE('',*,*,#10534,.F.);+#13820=ADVANCED_FACE('',(#13821),#13880,.F.);+#13821=FACE_BOUND('',#13822,.F.);+#13822=EDGE_LOOP('',(#13823,#13824,#13830,#13837,#13842,#13849,#13854,#13859,#13864,#13870,#13875,#13879));+#13823=ORIENTED_EDGE('',*,*,#13816,.F.);+#13824=ORIENTED_EDGE('',*,*,#13825,.T.);+#13825=EDGE_CURVE('',#11823,#13826,#13828,.T.);+#13826=VERTEX_POINT('',#13827);+#13827=CARTESIAN_POINT('',(-0.78,-7.2,0.75));+#13828=LINE('',#13829,#11635);+#13829=CARTESIAN_POINT('',(-0.78,-6.85,0.75));+#13830=ORIENTED_EDGE('',*,*,#13831,.T.);+#13831=EDGE_CURVE('',#13826,#13832,#13834,.T.);+#13832=VERTEX_POINT('',#13833);+#13833=CARTESIAN_POINT('',(-0.78,-7.298480775301,0.667364817767));+#13834=CIRCLE('',#13835,0.1);+#13835=AXIS2_PLACEMENT_3D('',#13836,#11644,#11645);+#13836=CARTESIAN_POINT('',(-0.78,-7.2,0.65));+#13837=ORIENTED_EDGE('',*,*,#13838,.T.);+#13838=EDGE_CURVE('',#13832,#13839,#13841,.T.);+#13839=VERTEX_POINT('',#13840);+#13840=CARTESIAN_POINT('',(-0.78,-7.382385590716,0.165270364467));+#13841=LINE('',#13833,#11651);+#13842=ORIENTED_EDGE('',*,*,#13843,.T.);+#13843=EDGE_CURVE('',#13839,#13844,#13846,.T.);+#13844=VERTEX_POINT('',#13845);+#13845=CARTESIAN_POINT('',(-0.78,-7.579347141319,1.387778780781E-16));+#13846=CIRCLE('',#13847,0.2);+#13847=AXIS2_PLACEMENT_3D('',#13848,#7993,#11660);+#13848=CARTESIAN_POINT('',(-0.78,-7.579347141319,0.2));+#13849=ORIENTED_EDGE('',*,*,#13850,.T.);+#13850=EDGE_CURVE('',#13844,#13851,#13853,.T.);+#13851=VERTEX_POINT('',#13852);+#13852=CARTESIAN_POINT('',(-0.78,-8.,1.387778780781E-16));+#13853=LINE('',#13845,#11635);+#13854=ORIENTED_EDGE('',*,*,#13855,.T.);+#13855=EDGE_CURVE('',#13851,#13856,#13858,.T.);+#13856=VERTEX_POINT('',#13857);+#13857=CARTESIAN_POINT('',(-0.78,-8.,0.1));+#13858=LINE('',#13852,#1074);+#13859=ORIENTED_EDGE('',*,*,#13860,.T.);+#13860=EDGE_CURVE('',#13856,#13861,#13863,.T.);+#13861=VERTEX_POINT('',#13862);+#13862=CARTESIAN_POINT('',(-0.78,-7.579347141319,0.1));+#13863=LINE('',#13857,#3784);+#13864=ORIENTED_EDGE('',*,*,#13865,.T.);+#13865=EDGE_CURVE('',#13861,#13866,#13868,.T.);+#13866=VERTEX_POINT('',#13867);+#13867=CARTESIAN_POINT('',(-0.78,-7.480866366018,0.182635182233));+#13868=CIRCLE('',#13869,1.E-01);+#13869=AXIS2_PLACEMENT_3D('',#13848,#11644,#11682);+#13870=ORIENTED_EDGE('',*,*,#13871,.T.);+#13871=EDGE_CURVE('',#13866,#13872,#13874,.T.);+#13872=VERTEX_POINT('',#13873);+#13873=CARTESIAN_POINT('',(-0.78,-7.396961550602,0.684729635533));+#13874=LINE('',#13867,#11688);+#13875=ORIENTED_EDGE('',*,*,#13876,.T.);+#13876=EDGE_CURVE('',#13872,#10548,#13877,.T.);+#13877=CIRCLE('',#13878,0.2);+#13878=AXIS2_PLACEMENT_3D('',#13836,#7993,#11694);+#13879=ORIENTED_EDGE('',*,*,#10547,.T.);+#13880=PLANE('',#13881);+#13881=AXIS2_PLACEMENT_3D('',#13882,#7993,#13);+#13882=CARTESIAN_POINT('',(-0.78,-7.414276639233,0.410238158856));+#13883=ADVANCED_FACE('',(#13884),#13945,.T.);+#13884=FACE_BOUND('',#13885,.T.);+#13885=EDGE_LOOP('',(#13886,#13890,#13896,#13903,#13908,#13915,#13920,#13925,#13930,#13936,#13941,#10554));+#13886=ORIENTED_EDGE('',*,*,#13887,.F.);+#13887=EDGE_CURVE('',#11819,#10556,#13888,.T.);+#13888=LINE('',#13889,#1074);+#13889=CARTESIAN_POINT('',(-1.22,-7.,0.630119079428));+#13890=ORIENTED_EDGE('',*,*,#13891,.T.);+#13891=EDGE_CURVE('',#11819,#13892,#13894,.T.);+#13892=VERTEX_POINT('',#13893);+#13893=CARTESIAN_POINT('',(-1.22,-7.2,0.75));+#13894=LINE('',#13895,#11635);+#13895=CARTESIAN_POINT('',(-1.22,-6.85,0.75));+#13896=ORIENTED_EDGE('',*,*,#13897,.T.);+#13897=EDGE_CURVE('',#13892,#13898,#13900,.T.);+#13898=VERTEX_POINT('',#13899);+#13899=CARTESIAN_POINT('',(-1.22,-7.298480775301,0.667364817767));+#13900=CIRCLE('',#13901,0.1);+#13901=AXIS2_PLACEMENT_3D('',#13902,#11644,#11645);+#13902=CARTESIAN_POINT('',(-1.22,-7.2,0.65));+#13903=ORIENTED_EDGE('',*,*,#13904,.T.);+#13904=EDGE_CURVE('',#13898,#13905,#13907,.T.);+#13905=VERTEX_POINT('',#13906);+#13906=CARTESIAN_POINT('',(-1.22,-7.382385590716,0.165270364467));+#13907=LINE('',#13899,#11651);+#13908=ORIENTED_EDGE('',*,*,#13909,.T.);+#13909=EDGE_CURVE('',#13905,#13910,#13912,.T.);+#13910=VERTEX_POINT('',#13911);+#13911=CARTESIAN_POINT('',(-1.22,-7.579347141319,1.387778780781E-16));+#13912=CIRCLE('',#13913,0.2);+#13913=AXIS2_PLACEMENT_3D('',#13914,#7993,#11660);+#13914=CARTESIAN_POINT('',(-1.22,-7.579347141319,0.2));+#13915=ORIENTED_EDGE('',*,*,#13916,.T.);+#13916=EDGE_CURVE('',#13910,#13917,#13919,.T.);+#13917=VERTEX_POINT('',#13918);+#13918=CARTESIAN_POINT('',(-1.22,-8.,1.387778780781E-16));+#13919=LINE('',#13911,#11635);+#13920=ORIENTED_EDGE('',*,*,#13921,.T.);+#13921=EDGE_CURVE('',#13917,#13922,#13924,.T.);+#13922=VERTEX_POINT('',#13923);+#13923=CARTESIAN_POINT('',(-1.22,-8.,0.1));+#13924=LINE('',#13918,#1074);+#13925=ORIENTED_EDGE('',*,*,#13926,.T.);+#13926=EDGE_CURVE('',#13922,#13927,#13929,.T.);+#13927=VERTEX_POINT('',#13928);+#13928=CARTESIAN_POINT('',(-1.22,-7.579347141319,0.1));+#13929=LINE('',#13923,#3784);+#13930=ORIENTED_EDGE('',*,*,#13931,.T.);+#13931=EDGE_CURVE('',#13927,#13932,#13934,.T.);+#13932=VERTEX_POINT('',#13933);+#13933=CARTESIAN_POINT('',(-1.22,-7.480866366018,0.182635182233));+#13934=CIRCLE('',#13935,1.E-01);+#13935=AXIS2_PLACEMENT_3D('',#13914,#11644,#11682);+#13936=ORIENTED_EDGE('',*,*,#13937,.T.);+#13937=EDGE_CURVE('',#13932,#13938,#13940,.T.);+#13938=VERTEX_POINT('',#13939);+#13939=CARTESIAN_POINT('',(-1.22,-7.396961550602,0.684729635533));+#13940=LINE('',#13933,#11688);+#13941=ORIENTED_EDGE('',*,*,#13942,.T.);+#13942=EDGE_CURVE('',#13938,#10551,#13943,.T.);+#13943=CIRCLE('',#13944,0.2);+#13944=AXIS2_PLACEMENT_3D('',#13902,#7993,#11694);+#13945=PLANE('',#13946);+#13946=AXIS2_PLACEMENT_3D('',#13947,#7993,#13);+#13947=CARTESIAN_POINT('',(-1.22,-7.414276639233,0.410238158856));+#13948=ADVANCED_FACE('',(#13949),#13956,.T.);+#13949=FACE_BOUND('',#13950,.F.);+#13950=EDGE_LOOP('',(#13951,#13941,#13954,#13955));+#13951=ORIENTED_EDGE('',*,*,#13952,.T.);+#13952=EDGE_CURVE('',#13872,#13938,#13953,.T.);+#13953=LINE('',#13873,#7992);+#13954=ORIENTED_EDGE('',*,*,#10550,.F.);+#13955=ORIENTED_EDGE('',*,*,#13876,.F.);+#13956=CYLINDRICAL_SURFACE('',#13957,0.2);+#13957=AXIS2_PLACEMENT_3D('',#13836,#11644,#11694);+#13958=ADVANCED_FACE('',(#13959),#8023,.F.);+#13959=FACE_BOUND('',#13960,.F.);+#13960=EDGE_LOOP('',(#13886,#13961,#13962,#13966));+#13961=ORIENTED_EDGE('',*,*,#11818,.T.);+#13962=ORIENTED_EDGE('',*,*,#13963,.T.);+#13963=EDGE_CURVE('',#11815,#10570,#13964,.T.);+#13964=LINE('',#13965,#1074);+#13965=CARTESIAN_POINT('',(-1.78,-7.,0.630119079428));+#13966=ORIENTED_EDGE('',*,*,#10569,.F.);+#13967=ADVANCED_FACE('',(#13968),#14027,.F.);+#13968=FACE_BOUND('',#13969,.F.);+#13969=EDGE_LOOP('',(#13970,#13971,#13977,#13984,#13989,#13996,#14001,#14006,#14011,#14017,#14022,#14026));+#13970=ORIENTED_EDGE('',*,*,#13963,.F.);+#13971=ORIENTED_EDGE('',*,*,#13972,.T.);+#13972=EDGE_CURVE('',#11815,#13973,#13975,.T.);+#13973=VERTEX_POINT('',#13974);+#13974=CARTESIAN_POINT('',(-1.78,-7.2,0.75));+#13975=LINE('',#13976,#11635);+#13976=CARTESIAN_POINT('',(-1.78,-6.85,0.75));+#13977=ORIENTED_EDGE('',*,*,#13978,.T.);+#13978=EDGE_CURVE('',#13973,#13979,#13981,.T.);+#13979=VERTEX_POINT('',#13980);+#13980=CARTESIAN_POINT('',(-1.78,-7.298480775301,0.667364817767));+#13981=CIRCLE('',#13982,0.1);+#13982=AXIS2_PLACEMENT_3D('',#13983,#11644,#11645);+#13983=CARTESIAN_POINT('',(-1.78,-7.2,0.65));+#13984=ORIENTED_EDGE('',*,*,#13985,.T.);+#13985=EDGE_CURVE('',#13979,#13986,#13988,.T.);+#13986=VERTEX_POINT('',#13987);+#13987=CARTESIAN_POINT('',(-1.78,-7.382385590716,0.165270364467));+#13988=LINE('',#13980,#11651);+#13989=ORIENTED_EDGE('',*,*,#13990,.T.);+#13990=EDGE_CURVE('',#13986,#13991,#13993,.T.);+#13991=VERTEX_POINT('',#13992);+#13992=CARTESIAN_POINT('',(-1.78,-7.579347141319,1.387778780781E-16));+#13993=CIRCLE('',#13994,0.2);+#13994=AXIS2_PLACEMENT_3D('',#13995,#7993,#11660);+#13995=CARTESIAN_POINT('',(-1.78,-7.579347141319,0.2));+#13996=ORIENTED_EDGE('',*,*,#13997,.T.);+#13997=EDGE_CURVE('',#13991,#13998,#14000,.T.);+#13998=VERTEX_POINT('',#13999);+#13999=CARTESIAN_POINT('',(-1.78,-8.,1.387778780781E-16));+#14000=LINE('',#13992,#11635);+#14001=ORIENTED_EDGE('',*,*,#14002,.T.);+#14002=EDGE_CURVE('',#13998,#14003,#14005,.T.);+#14003=VERTEX_POINT('',#14004);+#14004=CARTESIAN_POINT('',(-1.78,-8.,0.1));+#14005=LINE('',#13999,#1074);+#14006=ORIENTED_EDGE('',*,*,#14007,.T.);+#14007=EDGE_CURVE('',#14003,#14008,#14010,.T.);+#14008=VERTEX_POINT('',#14009);+#14009=CARTESIAN_POINT('',(-1.78,-7.579347141319,0.1));+#14010=LINE('',#14004,#3784);+#14011=ORIENTED_EDGE('',*,*,#14012,.T.);+#14012=EDGE_CURVE('',#14008,#14013,#14015,.T.);+#14013=VERTEX_POINT('',#14014);+#14014=CARTESIAN_POINT('',(-1.78,-7.480866366018,0.182635182233));+#14015=CIRCLE('',#14016,1.E-01);+#14016=AXIS2_PLACEMENT_3D('',#13995,#11644,#11682);+#14017=ORIENTED_EDGE('',*,*,#14018,.T.);+#14018=EDGE_CURVE('',#14013,#14019,#14021,.T.);+#14019=VERTEX_POINT('',#14020);+#14020=CARTESIAN_POINT('',(-1.78,-7.396961550602,0.684729635533));+#14021=LINE('',#14014,#11688);+#14022=ORIENTED_EDGE('',*,*,#14023,.T.);+#14023=EDGE_CURVE('',#14019,#10583,#14024,.T.);+#14024=CIRCLE('',#14025,0.2);+#14025=AXIS2_PLACEMENT_3D('',#13983,#7993,#11694);+#14026=ORIENTED_EDGE('',*,*,#10582,.T.);+#14027=PLANE('',#14028);+#14028=AXIS2_PLACEMENT_3D('',#14029,#7993,#13);+#14029=CARTESIAN_POINT('',(-1.78,-7.414276639233,0.410238158856));+#14030=ADVANCED_FACE('',(#14031),#14092,.T.);+#14031=FACE_BOUND('',#14032,.T.);+#14032=EDGE_LOOP('',(#14033,#14037,#14043,#14050,#14055,#14062,#14067,#14072,#14077,#14083,#14088,#10589));+#14033=ORIENTED_EDGE('',*,*,#14034,.F.);+#14034=EDGE_CURVE('',#11811,#10591,#14035,.T.);+#14035=LINE('',#14036,#1074);+#14036=CARTESIAN_POINT('',(-2.22,-7.,0.630119079428));+#14037=ORIENTED_EDGE('',*,*,#14038,.T.);+#14038=EDGE_CURVE('',#11811,#14039,#14041,.T.);+#14039=VERTEX_POINT('',#14040);+#14040=CARTESIAN_POINT('',(-2.22,-7.2,0.75));+#14041=LINE('',#14042,#11635);+#14042=CARTESIAN_POINT('',(-2.22,-6.85,0.75));+#14043=ORIENTED_EDGE('',*,*,#14044,.T.);+#14044=EDGE_CURVE('',#14039,#14045,#14047,.T.);+#14045=VERTEX_POINT('',#14046);+#14046=CARTESIAN_POINT('',(-2.22,-7.298480775301,0.667364817767));+#14047=CIRCLE('',#14048,0.1);+#14048=AXIS2_PLACEMENT_3D('',#14049,#11644,#11645);+#14049=CARTESIAN_POINT('',(-2.22,-7.2,0.65));+#14050=ORIENTED_EDGE('',*,*,#14051,.T.);+#14051=EDGE_CURVE('',#14045,#14052,#14054,.T.);+#14052=VERTEX_POINT('',#14053);+#14053=CARTESIAN_POINT('',(-2.22,-7.382385590716,0.165270364467));+#14054=LINE('',#14046,#11651);+#14055=ORIENTED_EDGE('',*,*,#14056,.T.);+#14056=EDGE_CURVE('',#14052,#14057,#14059,.T.);+#14057=VERTEX_POINT('',#14058);+#14058=CARTESIAN_POINT('',(-2.22,-7.579347141319,1.387778780781E-16));+#14059=CIRCLE('',#14060,0.2);+#14060=AXIS2_PLACEMENT_3D('',#14061,#7993,#11660);+#14061=CARTESIAN_POINT('',(-2.22,-7.579347141319,0.2));+#14062=ORIENTED_EDGE('',*,*,#14063,.T.);+#14063=EDGE_CURVE('',#14057,#14064,#14066,.T.);+#14064=VERTEX_POINT('',#14065);+#14065=CARTESIAN_POINT('',(-2.22,-8.,1.387778780781E-16));+#14066=LINE('',#14058,#11635);+#14067=ORIENTED_EDGE('',*,*,#14068,.T.);+#14068=EDGE_CURVE('',#14064,#14069,#14071,.T.);+#14069=VERTEX_POINT('',#14070);+#14070=CARTESIAN_POINT('',(-2.22,-8.,0.1));+#14071=LINE('',#14065,#1074);+#14072=ORIENTED_EDGE('',*,*,#14073,.T.);+#14073=EDGE_CURVE('',#14069,#14074,#14076,.T.);+#14074=VERTEX_POINT('',#14075);+#14075=CARTESIAN_POINT('',(-2.22,-7.579347141319,0.1));+#14076=LINE('',#14070,#3784);+#14077=ORIENTED_EDGE('',*,*,#14078,.T.);+#14078=EDGE_CURVE('',#14074,#14079,#14081,.T.);+#14079=VERTEX_POINT('',#14080);+#14080=CARTESIAN_POINT('',(-2.22,-7.480866366018,0.182635182233));+#14081=CIRCLE('',#14082,1.E-01);+#14082=AXIS2_PLACEMENT_3D('',#14061,#11644,#11682);+#14083=ORIENTED_EDGE('',*,*,#14084,.T.);+#14084=EDGE_CURVE('',#14079,#14085,#14087,.T.);+#14085=VERTEX_POINT('',#14086);+#14086=CARTESIAN_POINT('',(-2.22,-7.396961550602,0.684729635533));+#14087=LINE('',#14080,#11688);+#14088=ORIENTED_EDGE('',*,*,#14089,.T.);+#14089=EDGE_CURVE('',#14085,#10586,#14090,.T.);+#14090=CIRCLE('',#14091,0.2);+#14091=AXIS2_PLACEMENT_3D('',#14049,#7993,#11694);+#14092=PLANE('',#14093);+#14093=AXIS2_PLACEMENT_3D('',#14094,#7993,#13);+#14094=CARTESIAN_POINT('',(-2.22,-7.414276639233,0.410238158856));+#14095=ADVANCED_FACE('',(#14096),#14103,.T.);+#14096=FACE_BOUND('',#14097,.F.);+#14097=EDGE_LOOP('',(#14098,#14088,#14101,#14102));+#14098=ORIENTED_EDGE('',*,*,#14099,.T.);+#14099=EDGE_CURVE('',#14019,#14085,#14100,.T.);+#14100=LINE('',#14020,#7992);+#14101=ORIENTED_EDGE('',*,*,#10585,.F.);+#14102=ORIENTED_EDGE('',*,*,#14023,.F.);+#14103=CYLINDRICAL_SURFACE('',#14104,0.2);+#14104=AXIS2_PLACEMENT_3D('',#13983,#11644,#11694);+#14105=ADVANCED_FACE('',(#14106),#8023,.F.);+#14106=FACE_BOUND('',#14107,.F.);+#14107=EDGE_LOOP('',(#14033,#14108,#14109,#14113));+#14108=ORIENTED_EDGE('',*,*,#11810,.T.);+#14109=ORIENTED_EDGE('',*,*,#14110,.T.);+#14110=EDGE_CURVE('',#11807,#10605,#14111,.T.);+#14111=LINE('',#14112,#1074);+#14112=CARTESIAN_POINT('',(-2.78,-7.,0.630119079428));+#14113=ORIENTED_EDGE('',*,*,#10604,.F.);+#14114=ADVANCED_FACE('',(#14115),#14174,.F.);+#14115=FACE_BOUND('',#14116,.F.);+#14116=EDGE_LOOP('',(#14117,#14118,#14124,#14131,#14136,#14143,#14148,#14153,#14158,#14164,#14169,#14173));+#14117=ORIENTED_EDGE('',*,*,#14110,.F.);+#14118=ORIENTED_EDGE('',*,*,#14119,.T.);+#14119=EDGE_CURVE('',#11807,#14120,#14122,.T.);+#14120=VERTEX_POINT('',#14121);+#14121=CARTESIAN_POINT('',(-2.78,-7.2,0.75));+#14122=LINE('',#14123,#11635);+#14123=CARTESIAN_POINT('',(-2.78,-6.85,0.75));+#14124=ORIENTED_EDGE('',*,*,#14125,.T.);+#14125=EDGE_CURVE('',#14120,#14126,#14128,.T.);+#14126=VERTEX_POINT('',#14127);+#14127=CARTESIAN_POINT('',(-2.78,-7.298480775301,0.667364817767));+#14128=CIRCLE('',#14129,0.1);+#14129=AXIS2_PLACEMENT_3D('',#14130,#11644,#11645);+#14130=CARTESIAN_POINT('',(-2.78,-7.2,0.65));+#14131=ORIENTED_EDGE('',*,*,#14132,.T.);+#14132=EDGE_CURVE('',#14126,#14133,#14135,.T.);+#14133=VERTEX_POINT('',#14134);+#14134=CARTESIAN_POINT('',(-2.78,-7.382385590716,0.165270364467));+#14135=LINE('',#14127,#11651);+#14136=ORIENTED_EDGE('',*,*,#14137,.T.);+#14137=EDGE_CURVE('',#14133,#14138,#14140,.T.);+#14138=VERTEX_POINT('',#14139);+#14139=CARTESIAN_POINT('',(-2.78,-7.579347141319,1.387778780781E-16));+#14140=CIRCLE('',#14141,0.2);+#14141=AXIS2_PLACEMENT_3D('',#14142,#7993,#11660);+#14142=CARTESIAN_POINT('',(-2.78,-7.579347141319,0.2));+#14143=ORIENTED_EDGE('',*,*,#14144,.T.);+#14144=EDGE_CURVE('',#14138,#14145,#14147,.T.);+#14145=VERTEX_POINT('',#14146);+#14146=CARTESIAN_POINT('',(-2.78,-8.,1.387778780781E-16));+#14147=LINE('',#14139,#11635);+#14148=ORIENTED_EDGE('',*,*,#14149,.T.);+#14149=EDGE_CURVE('',#14145,#14150,#14152,.T.);+#14150=VERTEX_POINT('',#14151);+#14151=CARTESIAN_POINT('',(-2.78,-8.,0.1));+#14152=LINE('',#14146,#1074);+#14153=ORIENTED_EDGE('',*,*,#14154,.T.);+#14154=EDGE_CURVE('',#14150,#14155,#14157,.T.);+#14155=VERTEX_POINT('',#14156);+#14156=CARTESIAN_POINT('',(-2.78,-7.579347141319,0.1));+#14157=LINE('',#14151,#3784);+#14158=ORIENTED_EDGE('',*,*,#14159,.T.);+#14159=EDGE_CURVE('',#14155,#14160,#14162,.T.);+#14160=VERTEX_POINT('',#14161);+#14161=CARTESIAN_POINT('',(-2.78,-7.480866366018,0.182635182233));+#14162=CIRCLE('',#14163,1.E-01);+#14163=AXIS2_PLACEMENT_3D('',#14142,#11644,#11682);+#14164=ORIENTED_EDGE('',*,*,#14165,.T.);+#14165=EDGE_CURVE('',#14160,#14166,#14168,.T.);+#14166=VERTEX_POINT('',#14167);+#14167=CARTESIAN_POINT('',(-2.78,-7.396961550602,0.684729635533));+#14168=LINE('',#14161,#11688);+#14169=ORIENTED_EDGE('',*,*,#14170,.T.);+#14170=EDGE_CURVE('',#14166,#10618,#14171,.T.);+#14171=CIRCLE('',#14172,0.2);+#14172=AXIS2_PLACEMENT_3D('',#14130,#7993,#11694);+#14173=ORIENTED_EDGE('',*,*,#10617,.T.);+#14174=PLANE('',#14175);+#14175=AXIS2_PLACEMENT_3D('',#14176,#7993,#13);+#14176=CARTESIAN_POINT('',(-2.78,-7.414276639233,0.410238158856));+#14177=ADVANCED_FACE('',(#14178),#14239,.T.);+#14178=FACE_BOUND('',#14179,.T.);+#14179=EDGE_LOOP('',(#14180,#14184,#14190,#14197,#14202,#14209,#14214,#14219,#14224,#14230,#14235,#10624));+#14180=ORIENTED_EDGE('',*,*,#14181,.F.);+#14181=EDGE_CURVE('',#11803,#10626,#14182,.T.);+#14182=LINE('',#14183,#1074);+#14183=CARTESIAN_POINT('',(-3.22,-7.,0.630119079428));+#14184=ORIENTED_EDGE('',*,*,#14185,.T.);+#14185=EDGE_CURVE('',#11803,#14186,#14188,.T.);+#14186=VERTEX_POINT('',#14187);+#14187=CARTESIAN_POINT('',(-3.22,-7.2,0.75));+#14188=LINE('',#14189,#11635);+#14189=CARTESIAN_POINT('',(-3.22,-6.85,0.75));+#14190=ORIENTED_EDGE('',*,*,#14191,.T.);+#14191=EDGE_CURVE('',#14186,#14192,#14194,.T.);+#14192=VERTEX_POINT('',#14193);+#14193=CARTESIAN_POINT('',(-3.22,-7.298480775301,0.667364817767));+#14194=CIRCLE('',#14195,0.1);+#14195=AXIS2_PLACEMENT_3D('',#14196,#11644,#11645);+#14196=CARTESIAN_POINT('',(-3.22,-7.2,0.65));+#14197=ORIENTED_EDGE('',*,*,#14198,.T.);+#14198=EDGE_CURVE('',#14192,#14199,#14201,.T.);+#14199=VERTEX_POINT('',#14200);+#14200=CARTESIAN_POINT('',(-3.22,-7.382385590716,0.165270364467));+#14201=LINE('',#14193,#11651);+#14202=ORIENTED_EDGE('',*,*,#14203,.T.);+#14203=EDGE_CURVE('',#14199,#14204,#14206,.T.);+#14204=VERTEX_POINT('',#14205);+#14205=CARTESIAN_POINT('',(-3.22,-7.579347141319,1.387778780781E-16));+#14206=CIRCLE('',#14207,0.2);+#14207=AXIS2_PLACEMENT_3D('',#14208,#7993,#11660);+#14208=CARTESIAN_POINT('',(-3.22,-7.579347141319,0.2));+#14209=ORIENTED_EDGE('',*,*,#14210,.T.);+#14210=EDGE_CURVE('',#14204,#14211,#14213,.T.);+#14211=VERTEX_POINT('',#14212);+#14212=CARTESIAN_POINT('',(-3.22,-8.,1.387778780781E-16));+#14213=LINE('',#14205,#11635);+#14214=ORIENTED_EDGE('',*,*,#14215,.T.);+#14215=EDGE_CURVE('',#14211,#14216,#14218,.T.);+#14216=VERTEX_POINT('',#14217);+#14217=CARTESIAN_POINT('',(-3.22,-8.,0.1));+#14218=LINE('',#14212,#1074);+#14219=ORIENTED_EDGE('',*,*,#14220,.T.);+#14220=EDGE_CURVE('',#14216,#14221,#14223,.T.);+#14221=VERTEX_POINT('',#14222);+#14222=CARTESIAN_POINT('',(-3.22,-7.579347141319,0.1));+#14223=LINE('',#14217,#3784);+#14224=ORIENTED_EDGE('',*,*,#14225,.T.);+#14225=EDGE_CURVE('',#14221,#14226,#14228,.T.);+#14226=VERTEX_POINT('',#14227);+#14227=CARTESIAN_POINT('',(-3.22,-7.480866366018,0.182635182233));+#14228=CIRCLE('',#14229,1.E-01);+#14229=AXIS2_PLACEMENT_3D('',#14208,#11644,#11682);+#14230=ORIENTED_EDGE('',*,*,#14231,.T.);+#14231=EDGE_CURVE('',#14226,#14232,#14234,.T.);+#14232=VERTEX_POINT('',#14233);+#14233=CARTESIAN_POINT('',(-3.22,-7.396961550602,0.684729635533));+#14234=LINE('',#14227,#11688);+#14235=ORIENTED_EDGE('',*,*,#14236,.T.);+#14236=EDGE_CURVE('',#14232,#10621,#14237,.T.);+#14237=CIRCLE('',#14238,0.2);+#14238=AXIS2_PLACEMENT_3D('',#14196,#7993,#11694);+#14239=PLANE('',#14240);+#14240=AXIS2_PLACEMENT_3D('',#14241,#7993,#13);+#14241=CARTESIAN_POINT('',(-3.22,-7.414276639233,0.410238158856));+#14242=ADVANCED_FACE('',(#14243),#14250,.T.);+#14243=FACE_BOUND('',#14244,.F.);+#14244=EDGE_LOOP('',(#14245,#14235,#14248,#14249));+#14245=ORIENTED_EDGE('',*,*,#14246,.T.);+#14246=EDGE_CURVE('',#14166,#14232,#14247,.T.);+#14247=LINE('',#14167,#7992);+#14248=ORIENTED_EDGE('',*,*,#10620,.F.);+#14249=ORIENTED_EDGE('',*,*,#14170,.F.);+#14250=CYLINDRICAL_SURFACE('',#14251,0.2);+#14251=AXIS2_PLACEMENT_3D('',#14130,#11644,#11694);+#14252=ADVANCED_FACE('',(#14253),#8023,.F.);+#14253=FACE_BOUND('',#14254,.F.);+#14254=EDGE_LOOP('',(#14180,#14255,#14256,#14260));+#14255=ORIENTED_EDGE('',*,*,#11802,.T.);+#14256=ORIENTED_EDGE('',*,*,#14257,.T.);+#14257=EDGE_CURVE('',#11799,#10640,#14258,.T.);+#14258=LINE('',#14259,#1074);+#14259=CARTESIAN_POINT('',(-3.78,-7.,0.630119079428));+#14260=ORIENTED_EDGE('',*,*,#10639,.F.);+#14261=ADVANCED_FACE('',(#14262),#14321,.F.);+#14262=FACE_BOUND('',#14263,.F.);+#14263=EDGE_LOOP('',(#14264,#14265,#14271,#14278,#14283,#14290,#14295,#14300,#14305,#14311,#14316,#14320));+#14264=ORIENTED_EDGE('',*,*,#14257,.F.);+#14265=ORIENTED_EDGE('',*,*,#14266,.T.);+#14266=EDGE_CURVE('',#11799,#14267,#14269,.T.);+#14267=VERTEX_POINT('',#14268);+#14268=CARTESIAN_POINT('',(-3.78,-7.2,0.75));+#14269=LINE('',#14270,#11635);+#14270=CARTESIAN_POINT('',(-3.78,-6.85,0.75));+#14271=ORIENTED_EDGE('',*,*,#14272,.T.);+#14272=EDGE_CURVE('',#14267,#14273,#14275,.T.);+#14273=VERTEX_POINT('',#14274);+#14274=CARTESIAN_POINT('',(-3.78,-7.298480775301,0.667364817767));+#14275=CIRCLE('',#14276,0.1);+#14276=AXIS2_PLACEMENT_3D('',#14277,#11644,#11645);+#14277=CARTESIAN_POINT('',(-3.78,-7.2,0.65));+#14278=ORIENTED_EDGE('',*,*,#14279,.T.);+#14279=EDGE_CURVE('',#14273,#14280,#14282,.T.);+#14280=VERTEX_POINT('',#14281);+#14281=CARTESIAN_POINT('',(-3.78,-7.382385590716,0.165270364467));+#14282=LINE('',#14274,#11651);+#14283=ORIENTED_EDGE('',*,*,#14284,.T.);+#14284=EDGE_CURVE('',#14280,#14285,#14287,.T.);+#14285=VERTEX_POINT('',#14286);+#14286=CARTESIAN_POINT('',(-3.78,-7.579347141319,1.387778780781E-16));+#14287=CIRCLE('',#14288,0.2);+#14288=AXIS2_PLACEMENT_3D('',#14289,#7993,#11660);+#14289=CARTESIAN_POINT('',(-3.78,-7.579347141319,0.2));+#14290=ORIENTED_EDGE('',*,*,#14291,.T.);+#14291=EDGE_CURVE('',#14285,#14292,#14294,.T.);+#14292=VERTEX_POINT('',#14293);+#14293=CARTESIAN_POINT('',(-3.78,-8.,1.387778780781E-16));+#14294=LINE('',#14286,#11635);+#14295=ORIENTED_EDGE('',*,*,#14296,.T.);+#14296=EDGE_CURVE('',#14292,#14297,#14299,.T.);+#14297=VERTEX_POINT('',#14298);+#14298=CARTESIAN_POINT('',(-3.78,-8.,0.1));+#14299=LINE('',#14293,#1074);+#14300=ORIENTED_EDGE('',*,*,#14301,.T.);+#14301=EDGE_CURVE('',#14297,#14302,#14304,.T.);+#14302=VERTEX_POINT('',#14303);+#14303=CARTESIAN_POINT('',(-3.78,-7.579347141319,0.1));+#14304=LINE('',#14298,#3784);+#14305=ORIENTED_EDGE('',*,*,#14306,.T.);+#14306=EDGE_CURVE('',#14302,#14307,#14309,.T.);+#14307=VERTEX_POINT('',#14308);+#14308=CARTESIAN_POINT('',(-3.78,-7.480866366018,0.182635182233));+#14309=CIRCLE('',#14310,1.E-01);+#14310=AXIS2_PLACEMENT_3D('',#14289,#11644,#11682);+#14311=ORIENTED_EDGE('',*,*,#14312,.T.);+#14312=EDGE_CURVE('',#14307,#14313,#14315,.T.);+#14313=VERTEX_POINT('',#14314);+#14314=CARTESIAN_POINT('',(-3.78,-7.396961550602,0.684729635533));+#14315=LINE('',#14308,#11688);+#14316=ORIENTED_EDGE('',*,*,#14317,.T.);+#14317=EDGE_CURVE('',#14313,#10653,#14318,.T.);+#14318=CIRCLE('',#14319,0.2);+#14319=AXIS2_PLACEMENT_3D('',#14277,#7993,#11694);+#14320=ORIENTED_EDGE('',*,*,#10652,.T.);+#14321=PLANE('',#14322);+#14322=AXIS2_PLACEMENT_3D('',#14323,#7993,#13);+#14323=CARTESIAN_POINT('',(-3.78,-7.414276639233,0.410238158856));+#14324=ADVANCED_FACE('',(#14325),#14386,.T.);+#14325=FACE_BOUND('',#14326,.T.);+#14326=EDGE_LOOP('',(#14327,#14331,#14337,#14344,#14349,#14356,#14361,#14366,#14371,#14377,#14382,#10659));+#14327=ORIENTED_EDGE('',*,*,#14328,.F.);+#14328=EDGE_CURVE('',#11795,#10661,#14329,.T.);+#14329=LINE('',#14330,#1074);+#14330=CARTESIAN_POINT('',(-4.22,-7.,0.630119079428));+#14331=ORIENTED_EDGE('',*,*,#14332,.T.);+#14332=EDGE_CURVE('',#11795,#14333,#14335,.T.);+#14333=VERTEX_POINT('',#14334);+#14334=CARTESIAN_POINT('',(-4.22,-7.2,0.75));+#14335=LINE('',#14336,#11635);+#14336=CARTESIAN_POINT('',(-4.22,-6.85,0.75));+#14337=ORIENTED_EDGE('',*,*,#14338,.T.);+#14338=EDGE_CURVE('',#14333,#14339,#14341,.T.);+#14339=VERTEX_POINT('',#14340);+#14340=CARTESIAN_POINT('',(-4.22,-7.298480775301,0.667364817767));+#14341=CIRCLE('',#14342,0.1);+#14342=AXIS2_PLACEMENT_3D('',#14343,#11644,#11645);+#14343=CARTESIAN_POINT('',(-4.22,-7.2,0.65));+#14344=ORIENTED_EDGE('',*,*,#14345,.T.);+#14345=EDGE_CURVE('',#14339,#14346,#14348,.T.);+#14346=VERTEX_POINT('',#14347);+#14347=CARTESIAN_POINT('',(-4.22,-7.382385590716,0.165270364467));+#14348=LINE('',#14340,#11651);+#14349=ORIENTED_EDGE('',*,*,#14350,.T.);+#14350=EDGE_CURVE('',#14346,#14351,#14353,.T.);+#14351=VERTEX_POINT('',#14352);+#14352=CARTESIAN_POINT('',(-4.22,-7.579347141319,1.387778780781E-16));+#14353=CIRCLE('',#14354,0.2);+#14354=AXIS2_PLACEMENT_3D('',#14355,#7993,#11660);+#14355=CARTESIAN_POINT('',(-4.22,-7.579347141319,0.2));+#14356=ORIENTED_EDGE('',*,*,#14357,.T.);+#14357=EDGE_CURVE('',#14351,#14358,#14360,.T.);+#14358=VERTEX_POINT('',#14359);+#14359=CARTESIAN_POINT('',(-4.22,-8.,1.387778780781E-16));+#14360=LINE('',#14352,#11635);+#14361=ORIENTED_EDGE('',*,*,#14362,.T.);+#14362=EDGE_CURVE('',#14358,#14363,#14365,.T.);+#14363=VERTEX_POINT('',#14364);+#14364=CARTESIAN_POINT('',(-4.22,-8.,0.1));+#14365=LINE('',#14359,#1074);+#14366=ORIENTED_EDGE('',*,*,#14367,.T.);+#14367=EDGE_CURVE('',#14363,#14368,#14370,.T.);+#14368=VERTEX_POINT('',#14369);+#14369=CARTESIAN_POINT('',(-4.22,-7.579347141319,0.1));+#14370=LINE('',#14364,#3784);+#14371=ORIENTED_EDGE('',*,*,#14372,.T.);+#14372=EDGE_CURVE('',#14368,#14373,#14375,.T.);+#14373=VERTEX_POINT('',#14374);+#14374=CARTESIAN_POINT('',(-4.22,-7.480866366018,0.182635182233));+#14375=CIRCLE('',#14376,1.E-01);+#14376=AXIS2_PLACEMENT_3D('',#14355,#11644,#11682);+#14377=ORIENTED_EDGE('',*,*,#14378,.T.);+#14378=EDGE_CURVE('',#14373,#14379,#14381,.T.);+#14379=VERTEX_POINT('',#14380);+#14380=CARTESIAN_POINT('',(-4.22,-7.396961550602,0.684729635533));+#14381=LINE('',#14374,#11688);+#14382=ORIENTED_EDGE('',*,*,#14383,.T.);+#14383=EDGE_CURVE('',#14379,#10656,#14384,.T.);+#14384=CIRCLE('',#14385,0.2);+#14385=AXIS2_PLACEMENT_3D('',#14343,#7993,#11694);+#14386=PLANE('',#14387);+#14387=AXIS2_PLACEMENT_3D('',#14388,#7993,#13);+#14388=CARTESIAN_POINT('',(-4.22,-7.414276639233,0.410238158856));+#14389=ADVANCED_FACE('',(#14390),#14397,.T.);+#14390=FACE_BOUND('',#14391,.F.);+#14391=EDGE_LOOP('',(#14392,#14382,#14395,#14396));+#14392=ORIENTED_EDGE('',*,*,#14393,.T.);+#14393=EDGE_CURVE('',#14313,#14379,#14394,.T.);+#14394=LINE('',#14314,#7992);+#14395=ORIENTED_EDGE('',*,*,#10655,.F.);+#14396=ORIENTED_EDGE('',*,*,#14317,.F.);+#14397=CYLINDRICAL_SURFACE('',#14398,0.2);+#14398=AXIS2_PLACEMENT_3D('',#14277,#11644,#11694);+#14399=ADVANCED_FACE('',(#14400),#8023,.F.);+#14400=FACE_BOUND('',#14401,.F.);+#14401=EDGE_LOOP('',(#14327,#14402,#14403,#14407));+#14402=ORIENTED_EDGE('',*,*,#11794,.T.);+#14403=ORIENTED_EDGE('',*,*,#14404,.T.);+#14404=EDGE_CURVE('',#11791,#10675,#14405,.T.);+#14405=LINE('',#14406,#1074);+#14406=CARTESIAN_POINT('',(-4.78,-7.,0.630119079428));+#14407=ORIENTED_EDGE('',*,*,#10674,.F.);+#14408=ADVANCED_FACE('',(#14409),#14468,.F.);+#14409=FACE_BOUND('',#14410,.F.);+#14410=EDGE_LOOP('',(#14411,#14412,#14418,#14425,#14430,#14437,#14442,#14447,#14452,#14458,#14463,#14467));+#14411=ORIENTED_EDGE('',*,*,#14404,.F.);+#14412=ORIENTED_EDGE('',*,*,#14413,.T.);+#14413=EDGE_CURVE('',#11791,#14414,#14416,.T.);+#14414=VERTEX_POINT('',#14415);+#14415=CARTESIAN_POINT('',(-4.78,-7.2,0.75));+#14416=LINE('',#14417,#11635);+#14417=CARTESIAN_POINT('',(-4.78,-6.85,0.75));+#14418=ORIENTED_EDGE('',*,*,#14419,.T.);+#14419=EDGE_CURVE('',#14414,#14420,#14422,.T.);+#14420=VERTEX_POINT('',#14421);+#14421=CARTESIAN_POINT('',(-4.78,-7.298480775301,0.667364817767));+#14422=CIRCLE('',#14423,0.1);+#14423=AXIS2_PLACEMENT_3D('',#14424,#11644,#11645);+#14424=CARTESIAN_POINT('',(-4.78,-7.2,0.65));+#14425=ORIENTED_EDGE('',*,*,#14426,.T.);+#14426=EDGE_CURVE('',#14420,#14427,#14429,.T.);+#14427=VERTEX_POINT('',#14428);+#14428=CARTESIAN_POINT('',(-4.78,-7.382385590716,0.165270364467));+#14429=LINE('',#14421,#11651);+#14430=ORIENTED_EDGE('',*,*,#14431,.T.);+#14431=EDGE_CURVE('',#14427,#14432,#14434,.T.);+#14432=VERTEX_POINT('',#14433);+#14433=CARTESIAN_POINT('',(-4.78,-7.579347141319,1.387778780781E-16));+#14434=CIRCLE('',#14435,0.2);+#14435=AXIS2_PLACEMENT_3D('',#14436,#7993,#11660);+#14436=CARTESIAN_POINT('',(-4.78,-7.579347141319,0.2));+#14437=ORIENTED_EDGE('',*,*,#14438,.T.);+#14438=EDGE_CURVE('',#14432,#14439,#14441,.T.);+#14439=VERTEX_POINT('',#14440);+#14440=CARTESIAN_POINT('',(-4.78,-8.,1.387778780781E-16));+#14441=LINE('',#14433,#11635);+#14442=ORIENTED_EDGE('',*,*,#14443,.T.);+#14443=EDGE_CURVE('',#14439,#14444,#14446,.T.);+#14444=VERTEX_POINT('',#14445);+#14445=CARTESIAN_POINT('',(-4.78,-8.,0.1));+#14446=LINE('',#14440,#1074);+#14447=ORIENTED_EDGE('',*,*,#14448,.T.);+#14448=EDGE_CURVE('',#14444,#14449,#14451,.T.);+#14449=VERTEX_POINT('',#14450);+#14450=CARTESIAN_POINT('',(-4.78,-7.579347141319,0.1));+#14451=LINE('',#14445,#3784);+#14452=ORIENTED_EDGE('',*,*,#14453,.T.);+#14453=EDGE_CURVE('',#14449,#14454,#14456,.T.);+#14454=VERTEX_POINT('',#14455);+#14455=CARTESIAN_POINT('',(-4.78,-7.480866366018,0.182635182233));+#14456=CIRCLE('',#14457,1.E-01);+#14457=AXIS2_PLACEMENT_3D('',#14436,#11644,#11682);+#14458=ORIENTED_EDGE('',*,*,#14459,.T.);+#14459=EDGE_CURVE('',#14454,#14460,#14462,.T.);+#14460=VERTEX_POINT('',#14461);+#14461=CARTESIAN_POINT('',(-4.78,-7.396961550602,0.684729635533));+#14462=LINE('',#14455,#11688);+#14463=ORIENTED_EDGE('',*,*,#14464,.T.);+#14464=EDGE_CURVE('',#14460,#10688,#14465,.T.);+#14465=CIRCLE('',#14466,0.2);+#14466=AXIS2_PLACEMENT_3D('',#14424,#7993,#11694);+#14467=ORIENTED_EDGE('',*,*,#10687,.T.);+#14468=PLANE('',#14469);+#14469=AXIS2_PLACEMENT_3D('',#14470,#7993,#13);+#14470=CARTESIAN_POINT('',(-4.78,-7.414276639233,0.410238158856));+#14471=ADVANCED_FACE('',(#14472),#14533,.T.);+#14472=FACE_BOUND('',#14473,.T.);+#14473=EDGE_LOOP('',(#14474,#14478,#14484,#14491,#14496,#14503,#14508,#14513,#14518,#14524,#14529,#10694));+#14474=ORIENTED_EDGE('',*,*,#14475,.F.);+#14475=EDGE_CURVE('',#11787,#10696,#14476,.T.);+#14476=LINE('',#14477,#1074);+#14477=CARTESIAN_POINT('',(-5.22,-7.,0.630119079428));+#14478=ORIENTED_EDGE('',*,*,#14479,.T.);+#14479=EDGE_CURVE('',#11787,#14480,#14482,.T.);+#14480=VERTEX_POINT('',#14481);+#14481=CARTESIAN_POINT('',(-5.22,-7.2,0.75));+#14482=LINE('',#14483,#11635);+#14483=CARTESIAN_POINT('',(-5.22,-6.85,0.75));+#14484=ORIENTED_EDGE('',*,*,#14485,.T.);+#14485=EDGE_CURVE('',#14480,#14486,#14488,.T.);+#14486=VERTEX_POINT('',#14487);+#14487=CARTESIAN_POINT('',(-5.22,-7.298480775301,0.667364817767));+#14488=CIRCLE('',#14489,0.1);+#14489=AXIS2_PLACEMENT_3D('',#14490,#11644,#11645);+#14490=CARTESIAN_POINT('',(-5.22,-7.2,0.65));+#14491=ORIENTED_EDGE('',*,*,#14492,.T.);+#14492=EDGE_CURVE('',#14486,#14493,#14495,.T.);+#14493=VERTEX_POINT('',#14494);+#14494=CARTESIAN_POINT('',(-5.22,-7.382385590716,0.165270364467));+#14495=LINE('',#14487,#11651);+#14496=ORIENTED_EDGE('',*,*,#14497,.T.);+#14497=EDGE_CURVE('',#14493,#14498,#14500,.T.);+#14498=VERTEX_POINT('',#14499);+#14499=CARTESIAN_POINT('',(-5.22,-7.579347141319,1.387778780781E-16));+#14500=CIRCLE('',#14501,0.2);+#14501=AXIS2_PLACEMENT_3D('',#14502,#7993,#11660);+#14502=CARTESIAN_POINT('',(-5.22,-7.579347141319,0.2));+#14503=ORIENTED_EDGE('',*,*,#14504,.T.);+#14504=EDGE_CURVE('',#14498,#14505,#14507,.T.);+#14505=VERTEX_POINT('',#14506);+#14506=CARTESIAN_POINT('',(-5.22,-8.,1.387778780781E-16));+#14507=LINE('',#14499,#11635);+#14508=ORIENTED_EDGE('',*,*,#14509,.T.);+#14509=EDGE_CURVE('',#14505,#14510,#14512,.T.);+#14510=VERTEX_POINT('',#14511);+#14511=CARTESIAN_POINT('',(-5.22,-8.,0.1));+#14512=LINE('',#14506,#1074);+#14513=ORIENTED_EDGE('',*,*,#14514,.T.);+#14514=EDGE_CURVE('',#14510,#14515,#14517,.T.);+#14515=VERTEX_POINT('',#14516);+#14516=CARTESIAN_POINT('',(-5.22,-7.579347141319,0.1));+#14517=LINE('',#14511,#3784);+#14518=ORIENTED_EDGE('',*,*,#14519,.T.);+#14519=EDGE_CURVE('',#14515,#14520,#14522,.T.);+#14520=VERTEX_POINT('',#14521);+#14521=CARTESIAN_POINT('',(-5.22,-7.480866366018,0.182635182233));+#14522=CIRCLE('',#14523,1.E-01);+#14523=AXIS2_PLACEMENT_3D('',#14502,#11644,#11682);+#14524=ORIENTED_EDGE('',*,*,#14525,.T.);+#14525=EDGE_CURVE('',#14520,#14526,#14528,.T.);+#14526=VERTEX_POINT('',#14527);+#14527=CARTESIAN_POINT('',(-5.22,-7.396961550602,0.684729635533));+#14528=LINE('',#14521,#11688);+#14529=ORIENTED_EDGE('',*,*,#14530,.T.);+#14530=EDGE_CURVE('',#14526,#10691,#14531,.T.);+#14531=CIRCLE('',#14532,0.2);+#14532=AXIS2_PLACEMENT_3D('',#14490,#7993,#11694);+#14533=PLANE('',#14534);+#14534=AXIS2_PLACEMENT_3D('',#14535,#7993,#13);+#14535=CARTESIAN_POINT('',(-5.22,-7.414276639233,0.410238158856));+#14536=ADVANCED_FACE('',(#14537),#14544,.T.);+#14537=FACE_BOUND('',#14538,.F.);+#14538=EDGE_LOOP('',(#14539,#14529,#14542,#14543));+#14539=ORIENTED_EDGE('',*,*,#14540,.T.);+#14540=EDGE_CURVE('',#14460,#14526,#14541,.T.);+#14541=LINE('',#14461,#7992);+#14542=ORIENTED_EDGE('',*,*,#10690,.F.);+#14543=ORIENTED_EDGE('',*,*,#14464,.F.);+#14544=CYLINDRICAL_SURFACE('',#14545,0.2);+#14545=AXIS2_PLACEMENT_3D('',#14424,#11644,#11694);+#14546=ADVANCED_FACE('',(#14547),#8023,.F.);+#14547=FACE_BOUND('',#14548,.F.);+#14548=EDGE_LOOP('',(#14474,#14549,#14550,#14551));+#14549=ORIENTED_EDGE('',*,*,#11786,.T.);+#14550=ORIENTED_EDGE('',*,*,#12053,.T.);+#14551=ORIENTED_EDGE('',*,*,#10709,.F.);+#14552=ADVANCED_FACE('',(#14553),#14560,.F.);+#14553=FACE_BOUND('',#14554,.F.);+#14554=EDGE_LOOP('',(#14555,#11754,#14558,#14559));+#14555=ORIENTED_EDGE('',*,*,#14556,.T.);+#14556=EDGE_CURVE('',#11678,#11750,#14557,.T.);+#14557=LINE('',#11679,#7992);+#14558=ORIENTED_EDGE('',*,*,#11770,.F.);+#14559=ORIENTED_EDGE('',*,*,#11684,.F.);+#14560=PLANE('',#14561);+#14561=AXIS2_PLACEMENT_3D('',#11679,#14562,#11689);+#14562=DIRECTION('',(1.095038486235E-16,0.986322983713,-0.16482406317));+#14563=ADVANCED_FACE('',(#14564),#14571,.F.);+#14564=FACE_BOUND('',#14565,.F.);+#14565=EDGE_LOOP('',(#14566,#11748,#14569,#14570));+#14566=ORIENTED_EDGE('',*,*,#14567,.T.);+#14567=EDGE_CURVE('',#11673,#11745,#14568,.T.);+#14568=LINE('',#11674,#7992);+#14569=ORIENTED_EDGE('',*,*,#14556,.F.);+#14570=ORIENTED_EDGE('',*,*,#11677,.F.);+#14571=CYLINDRICAL_SURFACE('',#11681,1.E-01);+#14572=ADVANCED_FACE('',(#14573),#14580,.F.);+#14573=FACE_BOUND('',#14574,.F.);+#14574=EDGE_LOOP('',(#14575,#11743,#14578,#14579));+#14575=ORIENTED_EDGE('',*,*,#14576,.T.);+#14576=EDGE_CURVE('',#11668,#11740,#14577,.T.);+#14577=LINE('',#11669,#7992);+#14578=ORIENTED_EDGE('',*,*,#14567,.F.);+#14579=ORIENTED_EDGE('',*,*,#11672,.F.);+#14580=PLANE('',#14581);+#14581=AXIS2_PLACEMENT_3D('',#11669,#312,#3785);+#14582=ADVANCED_FACE('',(#14583),#14590,.F.);+#14583=FACE_BOUND('',#14584,.F.);+#14584=EDGE_LOOP('',(#14585,#11738,#14588,#14589));+#14585=ORIENTED_EDGE('',*,*,#14586,.T.);+#14586=EDGE_CURVE('',#11663,#11735,#14587,.T.);+#14587=LINE('',#11664,#7992);+#14588=ORIENTED_EDGE('',*,*,#14576,.F.);+#14589=ORIENTED_EDGE('',*,*,#11667,.F.);+#14590=PLANE('',#14591);+#14591=AXIS2_PLACEMENT_3D('',#11664,#3785,#13);+#14592=ADVANCED_FACE('',(#14593),#14600,.F.);+#14593=FACE_BOUND('',#14594,.F.);+#14594=EDGE_LOOP('',(#14595,#11733,#14598,#14599));+#14595=ORIENTED_EDGE('',*,*,#14596,.T.);+#14596=EDGE_CURVE('',#11655,#11728,#14597,.T.);+#14597=LINE('',#11656,#7992);+#14598=ORIENTED_EDGE('',*,*,#14586,.F.);+#14599=ORIENTED_EDGE('',*,*,#11662,.F.);+#14600=PLANE('',#14601);+#14601=AXIS2_PLACEMENT_3D('',#11656,#13,#11636);+#14602=ADVANCED_FACE('',(#14603),#14610,.T.);+#14603=FACE_BOUND('',#14604,.F.);+#14604=EDGE_LOOP('',(#14605,#11726,#14608,#14609));+#14605=ORIENTED_EDGE('',*,*,#14606,.T.);+#14606=EDGE_CURVE('',#11648,#11723,#14607,.T.);+#14607=LINE('',#11649,#7992);+#14608=ORIENTED_EDGE('',*,*,#14596,.F.);+#14609=ORIENTED_EDGE('',*,*,#11654,.F.);+#14610=CYLINDRICAL_SURFACE('',#14611,0.2);+#14611=AXIS2_PLACEMENT_3D('',#11659,#11644,#11660);+#14612=ADVANCED_FACE('',(#14613),#14620,.F.);+#14613=FACE_BOUND('',#14614,.F.);+#14614=EDGE_LOOP('',(#14615,#11721,#14618,#14619));+#14615=ORIENTED_EDGE('',*,*,#14616,.T.);+#14616=EDGE_CURVE('',#11639,#11716,#14617,.T.);+#14617=LINE('',#11640,#7992);+#14618=ORIENTED_EDGE('',*,*,#14606,.F.);+#14619=ORIENTED_EDGE('',*,*,#11647,.F.);+#14620=PLANE('',#14621);+#14621=AXIS2_PLACEMENT_3D('',#11640,#14622,#11652);+#14622=DIRECTION('',(-1.095038486235E-16,-0.986322983713,0.16482406317));+#14623=ADVANCED_FACE('',(#14624),#14631,.F.);+#14624=FACE_BOUND('',#14625,.F.);+#14625=EDGE_LOOP('',(#14626,#11714,#14629,#14630));+#14626=ORIENTED_EDGE('',*,*,#14627,.T.);+#14627=EDGE_CURVE('',#11631,#11710,#14628,.T.);+#14628=LINE('',#11632,#7992);+#14629=ORIENTED_EDGE('',*,*,#14616,.F.);+#14630=ORIENTED_EDGE('',*,*,#11638,.F.);+#14631=CYLINDRICAL_SURFACE('',#11642,0.1);+#14632=ADVANCED_FACE('',(#14633),#14638,.F.);+#14633=FACE_BOUND('',#14634,.F.);+#14634=EDGE_LOOP('',(#14635,#14636,#11708,#14637));+#14635=ORIENTED_EDGE('',*,*,#11630,.F.);+#14636=ORIENTED_EDGE('',*,*,#11876,.T.);+#14637=ORIENTED_EDGE('',*,*,#14627,.F.);+#14638=PLANE('',#14639);+#14639=AXIS2_PLACEMENT_3D('',#11634,#13,#11636);+#14640=ADVANCED_FACE('',(#14641),#14648,.F.);+#14641=FACE_BOUND('',#14642,.F.);+#14642=EDGE_LOOP('',(#14643,#14644,#13008,#14645));+#14643=ORIENTED_EDGE('',*,*,#12943,.F.);+#14644=ORIENTED_EDGE('',*,*,#11870,.T.);+#14645=ORIENTED_EDGE('',*,*,#14646,.F.);+#14646=EDGE_CURVE('',#12944,#13010,#14647,.T.);+#14647=LINE('',#12945,#7992);+#14648=PLANE('',#14649);+#14649=AXIS2_PLACEMENT_3D('',#12947,#13,#11636);+#14650=ADVANCED_FACE('',(#14651),#14658,.F.);+#14651=FACE_BOUND('',#14652,.F.);+#14652=EDGE_LOOP('',(#14653,#14654,#13155,#14655));+#14653=ORIENTED_EDGE('',*,*,#13090,.F.);+#14654=ORIENTED_EDGE('',*,*,#11862,.T.);+#14655=ORIENTED_EDGE('',*,*,#14656,.F.);+#14656=EDGE_CURVE('',#13091,#13157,#14657,.T.);+#14657=LINE('',#13092,#7992);+#14658=PLANE('',#14659);+#14659=AXIS2_PLACEMENT_3D('',#13094,#13,#11636);+#14660=ADVANCED_FACE('',(#14661),#14668,.F.);+#14661=FACE_BOUND('',#14662,.F.);+#14662=EDGE_LOOP('',(#14663,#14664,#13302,#14665));+#14663=ORIENTED_EDGE('',*,*,#13237,.F.);+#14664=ORIENTED_EDGE('',*,*,#11854,.T.);+#14665=ORIENTED_EDGE('',*,*,#14666,.F.);+#14666=EDGE_CURVE('',#13238,#13304,#14667,.T.);+#14667=LINE('',#13239,#7992);+#14668=PLANE('',#14669);+#14669=AXIS2_PLACEMENT_3D('',#13241,#13,#11636);+#14670=ADVANCED_FACE('',(#14671),#14678,.F.);+#14671=FACE_BOUND('',#14672,.F.);+#14672=EDGE_LOOP('',(#14673,#14674,#13449,#14675));+#14673=ORIENTED_EDGE('',*,*,#13384,.F.);+#14674=ORIENTED_EDGE('',*,*,#11846,.T.);+#14675=ORIENTED_EDGE('',*,*,#14676,.F.);+#14676=EDGE_CURVE('',#13385,#13451,#14677,.T.);+#14677=LINE('',#13386,#7992);+#14678=PLANE('',#14679);+#14679=AXIS2_PLACEMENT_3D('',#13388,#13,#11636);+#14680=ADVANCED_FACE('',(#14681),#14688,.F.);+#14681=FACE_BOUND('',#14682,.F.);+#14682=EDGE_LOOP('',(#14683,#14684,#13596,#14685));+#14683=ORIENTED_EDGE('',*,*,#13531,.F.);+#14684=ORIENTED_EDGE('',*,*,#11838,.T.);+#14685=ORIENTED_EDGE('',*,*,#14686,.F.);+#14686=EDGE_CURVE('',#13532,#13598,#14687,.T.);+#14687=LINE('',#13533,#7992);+#14688=PLANE('',#14689);+#14689=AXIS2_PLACEMENT_3D('',#13535,#13,#11636);+#14690=ADVANCED_FACE('',(#14691),#14698,.F.);+#14691=FACE_BOUND('',#14692,.F.);+#14692=EDGE_LOOP('',(#14693,#14694,#13743,#14695));+#14693=ORIENTED_EDGE('',*,*,#13678,.F.);+#14694=ORIENTED_EDGE('',*,*,#11830,.T.);+#14695=ORIENTED_EDGE('',*,*,#14696,.F.);+#14696=EDGE_CURVE('',#13679,#13745,#14697,.T.);+#14697=LINE('',#13680,#7992);+#14698=PLANE('',#14699);+#14699=AXIS2_PLACEMENT_3D('',#13682,#13,#11636);+#14700=ADVANCED_FACE('',(#14701),#14708,.F.);+#14701=FACE_BOUND('',#14702,.F.);+#14702=EDGE_LOOP('',(#14703,#14704,#13890,#14705));+#14703=ORIENTED_EDGE('',*,*,#13825,.F.);+#14704=ORIENTED_EDGE('',*,*,#11822,.T.);+#14705=ORIENTED_EDGE('',*,*,#14706,.F.);+#14706=EDGE_CURVE('',#13826,#13892,#14707,.T.);+#14707=LINE('',#13827,#7992);+#14708=PLANE('',#14709);+#14709=AXIS2_PLACEMENT_3D('',#13829,#13,#11636);+#14710=ADVANCED_FACE('',(#14711),#14718,.F.);+#14711=FACE_BOUND('',#14712,.F.);+#14712=EDGE_LOOP('',(#14713,#14714,#14037,#14715));+#14713=ORIENTED_EDGE('',*,*,#13972,.F.);+#14714=ORIENTED_EDGE('',*,*,#11814,.T.);+#14715=ORIENTED_EDGE('',*,*,#14716,.F.);+#14716=EDGE_CURVE('',#13973,#14039,#14717,.T.);+#14717=LINE('',#13974,#7992);+#14718=PLANE('',#14719);+#14719=AXIS2_PLACEMENT_3D('',#13976,#13,#11636);+#14720=ADVANCED_FACE('',(#14721),#14728,.F.);+#14721=FACE_BOUND('',#14722,.F.);+#14722=EDGE_LOOP('',(#14723,#14724,#14184,#14725));+#14723=ORIENTED_EDGE('',*,*,#14119,.F.);+#14724=ORIENTED_EDGE('',*,*,#11806,.T.);+#14725=ORIENTED_EDGE('',*,*,#14726,.F.);+#14726=EDGE_CURVE('',#14120,#14186,#14727,.T.);+#14727=LINE('',#14121,#7992);+#14728=PLANE('',#14729);+#14729=AXIS2_PLACEMENT_3D('',#14123,#13,#11636);+#14730=ADVANCED_FACE('',(#14731),#14738,.F.);+#14731=FACE_BOUND('',#14732,.F.);+#14732=EDGE_LOOP('',(#14733,#14734,#14331,#14735));+#14733=ORIENTED_EDGE('',*,*,#14266,.F.);+#14734=ORIENTED_EDGE('',*,*,#11798,.T.);+#14735=ORIENTED_EDGE('',*,*,#14736,.F.);+#14736=EDGE_CURVE('',#14267,#14333,#14737,.T.);+#14737=LINE('',#14268,#7992);+#14738=PLANE('',#14739);+#14739=AXIS2_PLACEMENT_3D('',#14270,#13,#11636);+#14740=ADVANCED_FACE('',(#14741),#14748,.F.);+#14741=FACE_BOUND('',#14742,.F.);+#14742=EDGE_LOOP('',(#14743,#14744,#14478,#14745));+#14743=ORIENTED_EDGE('',*,*,#14413,.F.);+#14744=ORIENTED_EDGE('',*,*,#11790,.T.);+#14745=ORIENTED_EDGE('',*,*,#14746,.F.);+#14746=EDGE_CURVE('',#14414,#14480,#14747,.T.);+#14747=LINE('',#14415,#7992);+#14748=PLANE('',#14749);+#14749=AXIS2_PLACEMENT_3D('',#14417,#13,#11636);+#14750=ADVANCED_FACE('',(#14751),#14758,.F.);+#14751=FACE_BOUND('',#14752,.F.);+#14752=EDGE_LOOP('',(#14753,#14754,#11991,#14755));+#14753=ORIENTED_EDGE('',*,*,#12057,.F.);+#14754=ORIENTED_EDGE('',*,*,#11782,.T.);+#14755=ORIENTED_EDGE('',*,*,#14756,.F.);+#14756=EDGE_CURVE('',#12058,#11993,#14757,.T.);+#14757=LINE('',#12059,#7992);+#14758=PLANE('',#14759);+#14759=AXIS2_PLACEMENT_3D('',#12061,#13,#11636);+#14760=ADVANCED_FACE('',(#14761),#14768,.F.);+#14761=FACE_BOUND('',#14762,.F.);+#14762=EDGE_LOOP('',(#14763,#12037,#14766,#14767));+#14763=ORIENTED_EDGE('',*,*,#14764,.T.);+#14764=EDGE_CURVE('',#12098,#12033,#14765,.T.);+#14765=LINE('',#12099,#7992);+#14766=ORIENTED_EDGE('',*,*,#12119,.F.);+#14767=ORIENTED_EDGE('',*,*,#12103,.F.);+#14768=PLANE('',#14769);+#14769=AXIS2_PLACEMENT_3D('',#12099,#14562,#11689);+#14770=ADVANCED_FACE('',(#14771),#14778,.F.);+#14771=FACE_BOUND('',#14772,.F.);+#14772=EDGE_LOOP('',(#14773,#12031,#14776,#14777));+#14773=ORIENTED_EDGE('',*,*,#14774,.T.);+#14774=EDGE_CURVE('',#12093,#12028,#14775,.T.);+#14775=LINE('',#12094,#7992);+#14776=ORIENTED_EDGE('',*,*,#14764,.F.);+#14777=ORIENTED_EDGE('',*,*,#12097,.F.);+#14778=CYLINDRICAL_SURFACE('',#12101,1.E-01);+#14779=ADVANCED_FACE('',(#14780),#14787,.F.);+#14780=FACE_BOUND('',#14781,.F.);+#14781=EDGE_LOOP('',(#14782,#12026,#14785,#14786));+#14782=ORIENTED_EDGE('',*,*,#14783,.T.);+#14783=EDGE_CURVE('',#12088,#12023,#14784,.T.);+#14784=LINE('',#12089,#7992);+#14785=ORIENTED_EDGE('',*,*,#14774,.F.);+#14786=ORIENTED_EDGE('',*,*,#12092,.F.);+#14787=PLANE('',#14788);+#14788=AXIS2_PLACEMENT_3D('',#12089,#312,#3785);+#14789=ADVANCED_FACE('',(#14790),#14797,.F.);+#14790=FACE_BOUND('',#14791,.F.);+#14791=EDGE_LOOP('',(#14792,#12021,#14795,#14796));+#14792=ORIENTED_EDGE('',*,*,#14793,.T.);+#14793=EDGE_CURVE('',#12083,#12018,#14794,.T.);+#14794=LINE('',#12084,#7992);+#14795=ORIENTED_EDGE('',*,*,#14783,.F.);+#14796=ORIENTED_EDGE('',*,*,#12087,.F.);+#14797=PLANE('',#14798);+#14798=AXIS2_PLACEMENT_3D('',#12084,#3785,#13);+#14799=ADVANCED_FACE('',(#14800),#14807,.F.);+#14800=FACE_BOUND('',#14801,.F.);+#14801=EDGE_LOOP('',(#14802,#12016,#14805,#14806));+#14802=ORIENTED_EDGE('',*,*,#14803,.T.);+#14803=EDGE_CURVE('',#12076,#12011,#14804,.T.);+#14804=LINE('',#12077,#7992);+#14805=ORIENTED_EDGE('',*,*,#14793,.F.);+#14806=ORIENTED_EDGE('',*,*,#12082,.F.);+#14807=PLANE('',#14808);+#14808=AXIS2_PLACEMENT_3D('',#12077,#13,#11636);+#14809=ADVANCED_FACE('',(#14810),#14817,.T.);+#14810=FACE_BOUND('',#14811,.F.);+#14811=EDGE_LOOP('',(#14812,#12009,#14815,#14816));+#14812=ORIENTED_EDGE('',*,*,#14813,.T.);+#14813=EDGE_CURVE('',#12071,#12006,#14814,.T.);+#14814=LINE('',#12072,#7992);+#14815=ORIENTED_EDGE('',*,*,#14803,.F.);+#14816=ORIENTED_EDGE('',*,*,#12075,.F.);+#14817=CYLINDRICAL_SURFACE('',#14818,0.2);+#14818=AXIS2_PLACEMENT_3D('',#12080,#11644,#11660);+#14819=ADVANCED_FACE('',(#14820),#14827,.F.);+#14820=FACE_BOUND('',#14821,.F.);+#14821=EDGE_LOOP('',(#14822,#12004,#14825,#14826));+#14822=ORIENTED_EDGE('',*,*,#14823,.T.);+#14823=EDGE_CURVE('',#12064,#11999,#14824,.T.);+#14824=LINE('',#12065,#7992);+#14825=ORIENTED_EDGE('',*,*,#14813,.F.);+#14826=ORIENTED_EDGE('',*,*,#12070,.F.);+#14827=PLANE('',#14828);+#14828=AXIS2_PLACEMENT_3D('',#12065,#14622,#11652);+#14829=ADVANCED_FACE('',(#14830),#14835,.F.);+#14830=FACE_BOUND('',#14831,.F.);+#14831=EDGE_LOOP('',(#14832,#11997,#14833,#14834));+#14832=ORIENTED_EDGE('',*,*,#14756,.T.);+#14833=ORIENTED_EDGE('',*,*,#14823,.F.);+#14834=ORIENTED_EDGE('',*,*,#12063,.F.);+#14835=CYLINDRICAL_SURFACE('',#12067,0.1);+#14836=ADVANCED_FACE('',(#14837),#14844,.F.);+#14837=FACE_BOUND('',#14838,.F.);+#14838=EDGE_LOOP('',(#14839,#13054,#14842,#14843));+#14839=ORIENTED_EDGE('',*,*,#14840,.T.);+#14840=EDGE_CURVE('',#12984,#13050,#14841,.T.);+#14841=LINE('',#12985,#7992);+#14842=ORIENTED_EDGE('',*,*,#13070,.F.);+#14843=ORIENTED_EDGE('',*,*,#12989,.F.);+#14844=PLANE('',#14845);+#14845=AXIS2_PLACEMENT_3D('',#12985,#14562,#11689);+#14846=ADVANCED_FACE('',(#14847),#14854,.F.);+#14847=FACE_BOUND('',#14848,.F.);+#14848=EDGE_LOOP('',(#14849,#13048,#14852,#14853));+#14849=ORIENTED_EDGE('',*,*,#14850,.T.);+#14850=EDGE_CURVE('',#12979,#13045,#14851,.T.);+#14851=LINE('',#12980,#7992);+#14852=ORIENTED_EDGE('',*,*,#14840,.F.);+#14853=ORIENTED_EDGE('',*,*,#12983,.F.);+#14854=CYLINDRICAL_SURFACE('',#12987,1.E-01);+#14855=ADVANCED_FACE('',(#14856),#14863,.F.);+#14856=FACE_BOUND('',#14857,.F.);+#14857=EDGE_LOOP('',(#14858,#13043,#14861,#14862));+#14858=ORIENTED_EDGE('',*,*,#14859,.T.);+#14859=EDGE_CURVE('',#12974,#13040,#14860,.T.);+#14860=LINE('',#12975,#7992);+#14861=ORIENTED_EDGE('',*,*,#14850,.F.);+#14862=ORIENTED_EDGE('',*,*,#12978,.F.);+#14863=PLANE('',#14864);+#14864=AXIS2_PLACEMENT_3D('',#12975,#312,#3785);+#14865=ADVANCED_FACE('',(#14866),#14873,.F.);+#14866=FACE_BOUND('',#14867,.F.);+#14867=EDGE_LOOP('',(#14868,#13038,#14871,#14872));+#14868=ORIENTED_EDGE('',*,*,#14869,.T.);+#14869=EDGE_CURVE('',#12969,#13035,#14870,.T.);+#14870=LINE('',#12970,#7992);+#14871=ORIENTED_EDGE('',*,*,#14859,.F.);+#14872=ORIENTED_EDGE('',*,*,#12973,.F.);+#14873=PLANE('',#14874);+#14874=AXIS2_PLACEMENT_3D('',#12970,#3785,#13);+#14875=ADVANCED_FACE('',(#14876),#14883,.F.);+#14876=FACE_BOUND('',#14877,.F.);+#14877=EDGE_LOOP('',(#14878,#13033,#14881,#14882));+#14878=ORIENTED_EDGE('',*,*,#14879,.T.);+#14879=EDGE_CURVE('',#12962,#13028,#14880,.T.);+#14880=LINE('',#12963,#7992);+#14881=ORIENTED_EDGE('',*,*,#14869,.F.);+#14882=ORIENTED_EDGE('',*,*,#12968,.F.);+#14883=PLANE('',#14884);+#14884=AXIS2_PLACEMENT_3D('',#12963,#13,#11636);+#14885=ADVANCED_FACE('',(#14886),#14893,.T.);+#14886=FACE_BOUND('',#14887,.F.);+#14887=EDGE_LOOP('',(#14888,#13026,#14891,#14892));+#14888=ORIENTED_EDGE('',*,*,#14889,.T.);+#14889=EDGE_CURVE('',#12957,#13023,#14890,.T.);+#14890=LINE('',#12958,#7992);+#14891=ORIENTED_EDGE('',*,*,#14879,.F.);+#14892=ORIENTED_EDGE('',*,*,#12961,.F.);+#14893=CYLINDRICAL_SURFACE('',#14894,0.2);+#14894=AXIS2_PLACEMENT_3D('',#12966,#11644,#11660);+#14895=ADVANCED_FACE('',(#14896),#14903,.F.);+#14896=FACE_BOUND('',#14897,.F.);+#14897=EDGE_LOOP('',(#14898,#13021,#14901,#14902));+#14898=ORIENTED_EDGE('',*,*,#14899,.T.);+#14899=EDGE_CURVE('',#12950,#13016,#14900,.T.);+#14900=LINE('',#12951,#7992);+#14901=ORIENTED_EDGE('',*,*,#14889,.F.);+#14902=ORIENTED_EDGE('',*,*,#12956,.F.);+#14903=PLANE('',#14904);+#14904=AXIS2_PLACEMENT_3D('',#12951,#14622,#11652);+#14905=ADVANCED_FACE('',(#14906),#14911,.F.);+#14906=FACE_BOUND('',#14907,.F.);+#14907=EDGE_LOOP('',(#14908,#13014,#14909,#14910));+#14908=ORIENTED_EDGE('',*,*,#14646,.T.);+#14909=ORIENTED_EDGE('',*,*,#14899,.F.);+#14910=ORIENTED_EDGE('',*,*,#12949,.F.);+#14911=CYLINDRICAL_SURFACE('',#12953,0.1);+#14912=ADVANCED_FACE('',(#14913),#14920,.F.);+#14913=FACE_BOUND('',#14914,.F.);+#14914=EDGE_LOOP('',(#14915,#13201,#14918,#14919));+#14915=ORIENTED_EDGE('',*,*,#14916,.T.);+#14916=EDGE_CURVE('',#13131,#13197,#14917,.T.);+#14917=LINE('',#13132,#7992);+#14918=ORIENTED_EDGE('',*,*,#13217,.F.);+#14919=ORIENTED_EDGE('',*,*,#13136,.F.);+#14920=PLANE('',#14921);+#14921=AXIS2_PLACEMENT_3D('',#13132,#14562,#11689);+#14922=ADVANCED_FACE('',(#14923),#14930,.F.);+#14923=FACE_BOUND('',#14924,.F.);+#14924=EDGE_LOOP('',(#14925,#13195,#14928,#14929));+#14925=ORIENTED_EDGE('',*,*,#14926,.T.);+#14926=EDGE_CURVE('',#13126,#13192,#14927,.T.);+#14927=LINE('',#13127,#7992);+#14928=ORIENTED_EDGE('',*,*,#14916,.F.);+#14929=ORIENTED_EDGE('',*,*,#13130,.F.);+#14930=CYLINDRICAL_SURFACE('',#13134,1.E-01);+#14931=ADVANCED_FACE('',(#14932),#14939,.F.);+#14932=FACE_BOUND('',#14933,.F.);+#14933=EDGE_LOOP('',(#14934,#13190,#14937,#14938));+#14934=ORIENTED_EDGE('',*,*,#14935,.T.);+#14935=EDGE_CURVE('',#13121,#13187,#14936,.T.);+#14936=LINE('',#13122,#7992);+#14937=ORIENTED_EDGE('',*,*,#14926,.F.);+#14938=ORIENTED_EDGE('',*,*,#13125,.F.);+#14939=PLANE('',#14940);+#14940=AXIS2_PLACEMENT_3D('',#13122,#312,#3785);+#14941=ADVANCED_FACE('',(#14942),#14949,.F.);+#14942=FACE_BOUND('',#14943,.F.);+#14943=EDGE_LOOP('',(#14944,#13185,#14947,#14948));+#14944=ORIENTED_EDGE('',*,*,#14945,.T.);+#14945=EDGE_CURVE('',#13116,#13182,#14946,.T.);+#14946=LINE('',#13117,#7992);+#14947=ORIENTED_EDGE('',*,*,#14935,.F.);+#14948=ORIENTED_EDGE('',*,*,#13120,.F.);+#14949=PLANE('',#14950);+#14950=AXIS2_PLACEMENT_3D('',#13117,#3785,#13);+#14951=ADVANCED_FACE('',(#14952),#14959,.F.);+#14952=FACE_BOUND('',#14953,.F.);+#14953=EDGE_LOOP('',(#14954,#13180,#14957,#14958));+#14954=ORIENTED_EDGE('',*,*,#14955,.T.);+#14955=EDGE_CURVE('',#13109,#13175,#14956,.T.);+#14956=LINE('',#13110,#7992);+#14957=ORIENTED_EDGE('',*,*,#14945,.F.);+#14958=ORIENTED_EDGE('',*,*,#13115,.F.);+#14959=PLANE('',#14960);+#14960=AXIS2_PLACEMENT_3D('',#13110,#13,#11636);+#14961=ADVANCED_FACE('',(#14962),#14969,.T.);+#14962=FACE_BOUND('',#14963,.F.);+#14963=EDGE_LOOP('',(#14964,#13173,#14967,#14968));+#14964=ORIENTED_EDGE('',*,*,#14965,.T.);+#14965=EDGE_CURVE('',#13104,#13170,#14966,.T.);+#14966=LINE('',#13105,#7992);+#14967=ORIENTED_EDGE('',*,*,#14955,.F.);+#14968=ORIENTED_EDGE('',*,*,#13108,.F.);+#14969=CYLINDRICAL_SURFACE('',#14970,0.2);+#14970=AXIS2_PLACEMENT_3D('',#13113,#11644,#11660);+#14971=ADVANCED_FACE('',(#14972),#14979,.F.);+#14972=FACE_BOUND('',#14973,.F.);+#14973=EDGE_LOOP('',(#14974,#13168,#14977,#14978));+#14974=ORIENTED_EDGE('',*,*,#14975,.T.);+#14975=EDGE_CURVE('',#13097,#13163,#14976,.T.);+#14976=LINE('',#13098,#7992);+#14977=ORIENTED_EDGE('',*,*,#14965,.F.);+#14978=ORIENTED_EDGE('',*,*,#13103,.F.);+#14979=PLANE('',#14980);+#14980=AXIS2_PLACEMENT_3D('',#13098,#14622,#11652);+#14981=ADVANCED_FACE('',(#14982),#14987,.F.);+#14982=FACE_BOUND('',#14983,.F.);+#14983=EDGE_LOOP('',(#14984,#13161,#14985,#14986));+#14984=ORIENTED_EDGE('',*,*,#14656,.T.);+#14985=ORIENTED_EDGE('',*,*,#14975,.F.);+#14986=ORIENTED_EDGE('',*,*,#13096,.F.);+#14987=CYLINDRICAL_SURFACE('',#13100,0.1);+#14988=ADVANCED_FACE('',(#14989),#14996,.F.);+#14989=FACE_BOUND('',#14990,.F.);+#14990=EDGE_LOOP('',(#14991,#13348,#14994,#14995));+#14991=ORIENTED_EDGE('',*,*,#14992,.T.);+#14992=EDGE_CURVE('',#13278,#13344,#14993,.T.);+#14993=LINE('',#13279,#7992);+#14994=ORIENTED_EDGE('',*,*,#13364,.F.);+#14995=ORIENTED_EDGE('',*,*,#13283,.F.);+#14996=PLANE('',#14997);+#14997=AXIS2_PLACEMENT_3D('',#13279,#14562,#11689);+#14998=ADVANCED_FACE('',(#14999),#15006,.F.);+#14999=FACE_BOUND('',#15000,.F.);+#15000=EDGE_LOOP('',(#15001,#13342,#15004,#15005));+#15001=ORIENTED_EDGE('',*,*,#15002,.T.);+#15002=EDGE_CURVE('',#13273,#13339,#15003,.T.);+#15003=LINE('',#13274,#7992);+#15004=ORIENTED_EDGE('',*,*,#14992,.F.);+#15005=ORIENTED_EDGE('',*,*,#13277,.F.);+#15006=CYLINDRICAL_SURFACE('',#13281,1.E-01);+#15007=ADVANCED_FACE('',(#15008),#15015,.F.);+#15008=FACE_BOUND('',#15009,.F.);+#15009=EDGE_LOOP('',(#15010,#13337,#15013,#15014));+#15010=ORIENTED_EDGE('',*,*,#15011,.T.);+#15011=EDGE_CURVE('',#13268,#13334,#15012,.T.);+#15012=LINE('',#13269,#7992);+#15013=ORIENTED_EDGE('',*,*,#15002,.F.);+#15014=ORIENTED_EDGE('',*,*,#13272,.F.);+#15015=PLANE('',#15016);+#15016=AXIS2_PLACEMENT_3D('',#13269,#312,#3785);+#15017=ADVANCED_FACE('',(#15018),#15025,.F.);+#15018=FACE_BOUND('',#15019,.F.);+#15019=EDGE_LOOP('',(#15020,#13332,#15023,#15024));+#15020=ORIENTED_EDGE('',*,*,#15021,.T.);+#15021=EDGE_CURVE('',#13263,#13329,#15022,.T.);+#15022=LINE('',#13264,#7992);+#15023=ORIENTED_EDGE('',*,*,#15011,.F.);+#15024=ORIENTED_EDGE('',*,*,#13267,.F.);+#15025=PLANE('',#15026);+#15026=AXIS2_PLACEMENT_3D('',#13264,#3785,#13);+#15027=ADVANCED_FACE('',(#15028),#15035,.F.);+#15028=FACE_BOUND('',#15029,.F.);+#15029=EDGE_LOOP('',(#15030,#13327,#15033,#15034));+#15030=ORIENTED_EDGE('',*,*,#15031,.T.);+#15031=EDGE_CURVE('',#13256,#13322,#15032,.T.);+#15032=LINE('',#13257,#7992);+#15033=ORIENTED_EDGE('',*,*,#15021,.F.);+#15034=ORIENTED_EDGE('',*,*,#13262,.F.);+#15035=PLANE('',#15036);+#15036=AXIS2_PLACEMENT_3D('',#13257,#13,#11636);+#15037=ADVANCED_FACE('',(#15038),#15045,.T.);+#15038=FACE_BOUND('',#15039,.F.);+#15039=EDGE_LOOP('',(#15040,#13320,#15043,#15044));+#15040=ORIENTED_EDGE('',*,*,#15041,.T.);+#15041=EDGE_CURVE('',#13251,#13317,#15042,.T.);+#15042=LINE('',#13252,#7992);+#15043=ORIENTED_EDGE('',*,*,#15031,.F.);+#15044=ORIENTED_EDGE('',*,*,#13255,.F.);+#15045=CYLINDRICAL_SURFACE('',#15046,0.2);+#15046=AXIS2_PLACEMENT_3D('',#13260,#11644,#11660);+#15047=ADVANCED_FACE('',(#15048),#15055,.F.);+#15048=FACE_BOUND('',#15049,.F.);+#15049=EDGE_LOOP('',(#15050,#13315,#15053,#15054));+#15050=ORIENTED_EDGE('',*,*,#15051,.T.);+#15051=EDGE_CURVE('',#13244,#13310,#15052,.T.);+#15052=LINE('',#13245,#7992);+#15053=ORIENTED_EDGE('',*,*,#15041,.F.);+#15054=ORIENTED_EDGE('',*,*,#13250,.F.);+#15055=PLANE('',#15056);+#15056=AXIS2_PLACEMENT_3D('',#13245,#14622,#11652);+#15057=ADVANCED_FACE('',(#15058),#15063,.F.);+#15058=FACE_BOUND('',#15059,.F.);+#15059=EDGE_LOOP('',(#15060,#13308,#15061,#15062));+#15060=ORIENTED_EDGE('',*,*,#14666,.T.);+#15061=ORIENTED_EDGE('',*,*,#15051,.F.);+#15062=ORIENTED_EDGE('',*,*,#13243,.F.);+#15063=CYLINDRICAL_SURFACE('',#13247,0.1);+#15064=ADVANCED_FACE('',(#15065),#15072,.F.);+#15065=FACE_BOUND('',#15066,.F.);+#15066=EDGE_LOOP('',(#15067,#13495,#15070,#15071));+#15067=ORIENTED_EDGE('',*,*,#15068,.T.);+#15068=EDGE_CURVE('',#13425,#13491,#15069,.T.);+#15069=LINE('',#13426,#7992);+#15070=ORIENTED_EDGE('',*,*,#13511,.F.);+#15071=ORIENTED_EDGE('',*,*,#13430,.F.);+#15072=PLANE('',#15073);+#15073=AXIS2_PLACEMENT_3D('',#13426,#14562,#11689);+#15074=ADVANCED_FACE('',(#15075),#15082,.F.);+#15075=FACE_BOUND('',#15076,.F.);+#15076=EDGE_LOOP('',(#15077,#13489,#15080,#15081));+#15077=ORIENTED_EDGE('',*,*,#15078,.T.);+#15078=EDGE_CURVE('',#13420,#13486,#15079,.T.);+#15079=LINE('',#13421,#7992);+#15080=ORIENTED_EDGE('',*,*,#15068,.F.);+#15081=ORIENTED_EDGE('',*,*,#13424,.F.);+#15082=CYLINDRICAL_SURFACE('',#13428,1.E-01);+#15083=ADVANCED_FACE('',(#15084),#15091,.F.);+#15084=FACE_BOUND('',#15085,.F.);+#15085=EDGE_LOOP('',(#15086,#13484,#15089,#15090));+#15086=ORIENTED_EDGE('',*,*,#15087,.T.);+#15087=EDGE_CURVE('',#13415,#13481,#15088,.T.);+#15088=LINE('',#13416,#7992);+#15089=ORIENTED_EDGE('',*,*,#15078,.F.);+#15090=ORIENTED_EDGE('',*,*,#13419,.F.);+#15091=PLANE('',#15092);+#15092=AXIS2_PLACEMENT_3D('',#13416,#312,#3785);+#15093=ADVANCED_FACE('',(#15094),#15101,.F.);+#15094=FACE_BOUND('',#15095,.F.);+#15095=EDGE_LOOP('',(#15096,#13479,#15099,#15100));+#15096=ORIENTED_EDGE('',*,*,#15097,.T.);+#15097=EDGE_CURVE('',#13410,#13476,#15098,.T.);+#15098=LINE('',#13411,#7992);+#15099=ORIENTED_EDGE('',*,*,#15087,.F.);+#15100=ORIENTED_EDGE('',*,*,#13414,.F.);+#15101=PLANE('',#15102);+#15102=AXIS2_PLACEMENT_3D('',#13411,#3785,#13);+#15103=ADVANCED_FACE('',(#15104),#15111,.F.);+#15104=FACE_BOUND('',#15105,.F.);+#15105=EDGE_LOOP('',(#15106,#13474,#15109,#15110));+#15106=ORIENTED_EDGE('',*,*,#15107,.T.);+#15107=EDGE_CURVE('',#13403,#13469,#15108,.T.);+#15108=LINE('',#13404,#7992);+#15109=ORIENTED_EDGE('',*,*,#15097,.F.);+#15110=ORIENTED_EDGE('',*,*,#13409,.F.);+#15111=PLANE('',#15112);+#15112=AXIS2_PLACEMENT_3D('',#13404,#13,#11636);+#15113=ADVANCED_FACE('',(#15114),#15121,.T.);+#15114=FACE_BOUND('',#15115,.F.);+#15115=EDGE_LOOP('',(#15116,#13467,#15119,#15120));+#15116=ORIENTED_EDGE('',*,*,#15117,.T.);+#15117=EDGE_CURVE('',#13398,#13464,#15118,.T.);+#15118=LINE('',#13399,#7992);+#15119=ORIENTED_EDGE('',*,*,#15107,.F.);+#15120=ORIENTED_EDGE('',*,*,#13402,.F.);+#15121=CYLINDRICAL_SURFACE('',#15122,0.2);+#15122=AXIS2_PLACEMENT_3D('',#13407,#11644,#11660);+#15123=ADVANCED_FACE('',(#15124),#15131,.F.);+#15124=FACE_BOUND('',#15125,.F.);+#15125=EDGE_LOOP('',(#15126,#13462,#15129,#15130));+#15126=ORIENTED_EDGE('',*,*,#15127,.T.);+#15127=EDGE_CURVE('',#13391,#13457,#15128,.T.);+#15128=LINE('',#13392,#7992);+#15129=ORIENTED_EDGE('',*,*,#15117,.F.);+#15130=ORIENTED_EDGE('',*,*,#13397,.F.);+#15131=PLANE('',#15132);+#15132=AXIS2_PLACEMENT_3D('',#13392,#14622,#11652);+#15133=ADVANCED_FACE('',(#15134),#15139,.F.);+#15134=FACE_BOUND('',#15135,.F.);+#15135=EDGE_LOOP('',(#15136,#13455,#15137,#15138));+#15136=ORIENTED_EDGE('',*,*,#14676,.T.);+#15137=ORIENTED_EDGE('',*,*,#15127,.F.);+#15138=ORIENTED_EDGE('',*,*,#13390,.F.);+#15139=CYLINDRICAL_SURFACE('',#13394,0.1);+#15140=ADVANCED_FACE('',(#15141),#15148,.F.);+#15141=FACE_BOUND('',#15142,.F.);+#15142=EDGE_LOOP('',(#15143,#13642,#15146,#15147));+#15143=ORIENTED_EDGE('',*,*,#15144,.T.);+#15144=EDGE_CURVE('',#13572,#13638,#15145,.T.);+#15145=LINE('',#13573,#7992);+#15146=ORIENTED_EDGE('',*,*,#13658,.F.);+#15147=ORIENTED_EDGE('',*,*,#13577,.F.);+#15148=PLANE('',#15149);+#15149=AXIS2_PLACEMENT_3D('',#13573,#14562,#11689);+#15150=ADVANCED_FACE('',(#15151),#15158,.F.);+#15151=FACE_BOUND('',#15152,.F.);+#15152=EDGE_LOOP('',(#15153,#13636,#15156,#15157));+#15153=ORIENTED_EDGE('',*,*,#15154,.T.);+#15154=EDGE_CURVE('',#13567,#13633,#15155,.T.);+#15155=LINE('',#13568,#7992);+#15156=ORIENTED_EDGE('',*,*,#15144,.F.);+#15157=ORIENTED_EDGE('',*,*,#13571,.F.);+#15158=CYLINDRICAL_SURFACE('',#13575,1.E-01);+#15159=ADVANCED_FACE('',(#15160),#15167,.F.);+#15160=FACE_BOUND('',#15161,.F.);+#15161=EDGE_LOOP('',(#15162,#13631,#15165,#15166));+#15162=ORIENTED_EDGE('',*,*,#15163,.T.);+#15163=EDGE_CURVE('',#13562,#13628,#15164,.T.);+#15164=LINE('',#13563,#7992);+#15165=ORIENTED_EDGE('',*,*,#15154,.F.);+#15166=ORIENTED_EDGE('',*,*,#13566,.F.);+#15167=PLANE('',#15168);+#15168=AXIS2_PLACEMENT_3D('',#13563,#312,#3785);+#15169=ADVANCED_FACE('',(#15170),#15177,.F.);+#15170=FACE_BOUND('',#15171,.F.);+#15171=EDGE_LOOP('',(#15172,#13626,#15175,#15176));+#15172=ORIENTED_EDGE('',*,*,#15173,.T.);+#15173=EDGE_CURVE('',#13557,#13623,#15174,.T.);+#15174=LINE('',#13558,#7992);+#15175=ORIENTED_EDGE('',*,*,#15163,.F.);+#15176=ORIENTED_EDGE('',*,*,#13561,.F.);+#15177=PLANE('',#15178);+#15178=AXIS2_PLACEMENT_3D('',#13558,#3785,#13);+#15179=ADVANCED_FACE('',(#15180),#15187,.F.);+#15180=FACE_BOUND('',#15181,.F.);+#15181=EDGE_LOOP('',(#15182,#13621,#15185,#15186));+#15182=ORIENTED_EDGE('',*,*,#15183,.T.);+#15183=EDGE_CURVE('',#13550,#13616,#15184,.T.);+#15184=LINE('',#13551,#7992);+#15185=ORIENTED_EDGE('',*,*,#15173,.F.);+#15186=ORIENTED_EDGE('',*,*,#13556,.F.);+#15187=PLANE('',#15188);+#15188=AXIS2_PLACEMENT_3D('',#13551,#13,#11636);+#15189=ADVANCED_FACE('',(#15190),#15197,.T.);+#15190=FACE_BOUND('',#15191,.F.);+#15191=EDGE_LOOP('',(#15192,#13614,#15195,#15196));+#15192=ORIENTED_EDGE('',*,*,#15193,.T.);+#15193=EDGE_CURVE('',#13545,#13611,#15194,.T.);+#15194=LINE('',#13546,#7992);+#15195=ORIENTED_EDGE('',*,*,#15183,.F.);+#15196=ORIENTED_EDGE('',*,*,#13549,.F.);+#15197=CYLINDRICAL_SURFACE('',#15198,0.2);+#15198=AXIS2_PLACEMENT_3D('',#13554,#11644,#11660);+#15199=ADVANCED_FACE('',(#15200),#15207,.F.);+#15200=FACE_BOUND('',#15201,.F.);+#15201=EDGE_LOOP('',(#15202,#13609,#15205,#15206));+#15202=ORIENTED_EDGE('',*,*,#15203,.T.);+#15203=EDGE_CURVE('',#13538,#13604,#15204,.T.);+#15204=LINE('',#13539,#7992);+#15205=ORIENTED_EDGE('',*,*,#15193,.F.);+#15206=ORIENTED_EDGE('',*,*,#13544,.F.);+#15207=PLANE('',#15208);+#15208=AXIS2_PLACEMENT_3D('',#13539,#14622,#11652);+#15209=ADVANCED_FACE('',(#15210),#15215,.F.);+#15210=FACE_BOUND('',#15211,.F.);+#15211=EDGE_LOOP('',(#15212,#13602,#15213,#15214));+#15212=ORIENTED_EDGE('',*,*,#14686,.T.);+#15213=ORIENTED_EDGE('',*,*,#15203,.F.);+#15214=ORIENTED_EDGE('',*,*,#13537,.F.);+#15215=CYLINDRICAL_SURFACE('',#13541,0.1);+#15216=ADVANCED_FACE('',(#15217),#15224,.F.);+#15217=FACE_BOUND('',#15218,.F.);+#15218=EDGE_LOOP('',(#15219,#13789,#15222,#15223));+#15219=ORIENTED_EDGE('',*,*,#15220,.T.);+#15220=EDGE_CURVE('',#13719,#13785,#15221,.T.);+#15221=LINE('',#13720,#7992);+#15222=ORIENTED_EDGE('',*,*,#13805,.F.);+#15223=ORIENTED_EDGE('',*,*,#13724,.F.);+#15224=PLANE('',#15225);+#15225=AXIS2_PLACEMENT_3D('',#13720,#14562,#11689);+#15226=ADVANCED_FACE('',(#15227),#15234,.F.);+#15227=FACE_BOUND('',#15228,.F.);+#15228=EDGE_LOOP('',(#15229,#13783,#15232,#15233));+#15229=ORIENTED_EDGE('',*,*,#15230,.T.);+#15230=EDGE_CURVE('',#13714,#13780,#15231,.T.);+#15231=LINE('',#13715,#7992);+#15232=ORIENTED_EDGE('',*,*,#15220,.F.);+#15233=ORIENTED_EDGE('',*,*,#13718,.F.);+#15234=CYLINDRICAL_SURFACE('',#13722,1.E-01);+#15235=ADVANCED_FACE('',(#15236),#15243,.F.);+#15236=FACE_BOUND('',#15237,.F.);+#15237=EDGE_LOOP('',(#15238,#13778,#15241,#15242));+#15238=ORIENTED_EDGE('',*,*,#15239,.T.);+#15239=EDGE_CURVE('',#13709,#13775,#15240,.T.);+#15240=LINE('',#13710,#7992);+#15241=ORIENTED_EDGE('',*,*,#15230,.F.);+#15242=ORIENTED_EDGE('',*,*,#13713,.F.);+#15243=PLANE('',#15244);+#15244=AXIS2_PLACEMENT_3D('',#13710,#312,#3785);+#15245=ADVANCED_FACE('',(#15246),#15253,.F.);+#15246=FACE_BOUND('',#15247,.F.);+#15247=EDGE_LOOP('',(#15248,#13773,#15251,#15252));+#15248=ORIENTED_EDGE('',*,*,#15249,.T.);+#15249=EDGE_CURVE('',#13704,#13770,#15250,.T.);+#15250=LINE('',#13705,#7992);+#15251=ORIENTED_EDGE('',*,*,#15239,.F.);+#15252=ORIENTED_EDGE('',*,*,#13708,.F.);+#15253=PLANE('',#15254);+#15254=AXIS2_PLACEMENT_3D('',#13705,#3785,#13);+#15255=ADVANCED_FACE('',(#15256),#15263,.F.);+#15256=FACE_BOUND('',#15257,.F.);+#15257=EDGE_LOOP('',(#15258,#13768,#15261,#15262));+#15258=ORIENTED_EDGE('',*,*,#15259,.T.);+#15259=EDGE_CURVE('',#13697,#13763,#15260,.T.);+#15260=LINE('',#13698,#7992);+#15261=ORIENTED_EDGE('',*,*,#15249,.F.);+#15262=ORIENTED_EDGE('',*,*,#13703,.F.);+#15263=PLANE('',#15264);+#15264=AXIS2_PLACEMENT_3D('',#13698,#13,#11636);+#15265=ADVANCED_FACE('',(#15266),#15273,.T.);+#15266=FACE_BOUND('',#15267,.F.);+#15267=EDGE_LOOP('',(#15268,#13761,#15271,#15272));+#15268=ORIENTED_EDGE('',*,*,#15269,.T.);+#15269=EDGE_CURVE('',#13692,#13758,#15270,.T.);+#15270=LINE('',#13693,#7992);+#15271=ORIENTED_EDGE('',*,*,#15259,.F.);+#15272=ORIENTED_EDGE('',*,*,#13696,.F.);+#15273=CYLINDRICAL_SURFACE('',#15274,0.2);+#15274=AXIS2_PLACEMENT_3D('',#13701,#11644,#11660);+#15275=ADVANCED_FACE('',(#15276),#15283,.F.);+#15276=FACE_BOUND('',#15277,.F.);+#15277=EDGE_LOOP('',(#15278,#13756,#15281,#15282));+#15278=ORIENTED_EDGE('',*,*,#15279,.T.);+#15279=EDGE_CURVE('',#13685,#13751,#15280,.T.);+#15280=LINE('',#13686,#7992);+#15281=ORIENTED_EDGE('',*,*,#15269,.F.);+#15282=ORIENTED_EDGE('',*,*,#13691,.F.);+#15283=PLANE('',#15284);+#15284=AXIS2_PLACEMENT_3D('',#13686,#14622,#11652);+#15285=ADVANCED_FACE('',(#15286),#15291,.F.);+#15286=FACE_BOUND('',#15287,.F.);+#15287=EDGE_LOOP('',(#15288,#13749,#15289,#15290));+#15288=ORIENTED_EDGE('',*,*,#14696,.T.);+#15289=ORIENTED_EDGE('',*,*,#15279,.F.);+#15290=ORIENTED_EDGE('',*,*,#13684,.F.);+#15291=CYLINDRICAL_SURFACE('',#13688,0.1);+#15292=ADVANCED_FACE('',(#15293),#15300,.F.);+#15293=FACE_BOUND('',#15294,.F.);+#15294=EDGE_LOOP('',(#15295,#13936,#15298,#15299));+#15295=ORIENTED_EDGE('',*,*,#15296,.T.);+#15296=EDGE_CURVE('',#13866,#13932,#15297,.T.);+#15297=LINE('',#13867,#7992);+#15298=ORIENTED_EDGE('',*,*,#13952,.F.);+#15299=ORIENTED_EDGE('',*,*,#13871,.F.);+#15300=PLANE('',#15301);+#15301=AXIS2_PLACEMENT_3D('',#13867,#14562,#11689);+#15302=ADVANCED_FACE('',(#15303),#15310,.F.);+#15303=FACE_BOUND('',#15304,.F.);+#15304=EDGE_LOOP('',(#15305,#13930,#15308,#15309));+#15305=ORIENTED_EDGE('',*,*,#15306,.T.);+#15306=EDGE_CURVE('',#13861,#13927,#15307,.T.);+#15307=LINE('',#13862,#7992);+#15308=ORIENTED_EDGE('',*,*,#15296,.F.);+#15309=ORIENTED_EDGE('',*,*,#13865,.F.);+#15310=CYLINDRICAL_SURFACE('',#13869,1.E-01);+#15311=ADVANCED_FACE('',(#15312),#15319,.F.);+#15312=FACE_BOUND('',#15313,.F.);+#15313=EDGE_LOOP('',(#15314,#13925,#15317,#15318));+#15314=ORIENTED_EDGE('',*,*,#15315,.T.);+#15315=EDGE_CURVE('',#13856,#13922,#15316,.T.);+#15316=LINE('',#13857,#7992);+#15317=ORIENTED_EDGE('',*,*,#15306,.F.);+#15318=ORIENTED_EDGE('',*,*,#13860,.F.);+#15319=PLANE('',#15320);+#15320=AXIS2_PLACEMENT_3D('',#13857,#312,#3785);+#15321=ADVANCED_FACE('',(#15322),#15329,.F.);+#15322=FACE_BOUND('',#15323,.F.);+#15323=EDGE_LOOP('',(#15324,#13920,#15327,#15328));+#15324=ORIENTED_EDGE('',*,*,#15325,.T.);+#15325=EDGE_CURVE('',#13851,#13917,#15326,.T.);+#15326=LINE('',#13852,#7992);+#15327=ORIENTED_EDGE('',*,*,#15315,.F.);+#15328=ORIENTED_EDGE('',*,*,#13855,.F.);+#15329=PLANE('',#15330);+#15330=AXIS2_PLACEMENT_3D('',#13852,#3785,#13);+#15331=ADVANCED_FACE('',(#15332),#15339,.F.);+#15332=FACE_BOUND('',#15333,.F.);+#15333=EDGE_LOOP('',(#15334,#13915,#15337,#15338));+#15334=ORIENTED_EDGE('',*,*,#15335,.T.);+#15335=EDGE_CURVE('',#13844,#13910,#15336,.T.);+#15336=LINE('',#13845,#7992);+#15337=ORIENTED_EDGE('',*,*,#15325,.F.);+#15338=ORIENTED_EDGE('',*,*,#13850,.F.);+#15339=PLANE('',#15340);+#15340=AXIS2_PLACEMENT_3D('',#13845,#13,#11636);+#15341=ADVANCED_FACE('',(#15342),#15349,.T.);+#15342=FACE_BOUND('',#15343,.F.);+#15343=EDGE_LOOP('',(#15344,#13908,#15347,#15348));+#15344=ORIENTED_EDGE('',*,*,#15345,.T.);+#15345=EDGE_CURVE('',#13839,#13905,#15346,.T.);+#15346=LINE('',#13840,#7992);+#15347=ORIENTED_EDGE('',*,*,#15335,.F.);+#15348=ORIENTED_EDGE('',*,*,#13843,.F.);+#15349=CYLINDRICAL_SURFACE('',#15350,0.2);+#15350=AXIS2_PLACEMENT_3D('',#13848,#11644,#11660);+#15351=ADVANCED_FACE('',(#15352),#15359,.F.);+#15352=FACE_BOUND('',#15353,.F.);+#15353=EDGE_LOOP('',(#15354,#13903,#15357,#15358));+#15354=ORIENTED_EDGE('',*,*,#15355,.T.);+#15355=EDGE_CURVE('',#13832,#13898,#15356,.T.);+#15356=LINE('',#13833,#7992);+#15357=ORIENTED_EDGE('',*,*,#15345,.F.);+#15358=ORIENTED_EDGE('',*,*,#13838,.F.);+#15359=PLANE('',#15360);+#15360=AXIS2_PLACEMENT_3D('',#13833,#14622,#11652);+#15361=ADVANCED_FACE('',(#15362),#15367,.F.);+#15362=FACE_BOUND('',#15363,.F.);+#15363=EDGE_LOOP('',(#15364,#13896,#15365,#15366));+#15364=ORIENTED_EDGE('',*,*,#14706,.T.);+#15365=ORIENTED_EDGE('',*,*,#15355,.F.);+#15366=ORIENTED_EDGE('',*,*,#13831,.F.);+#15367=CYLINDRICAL_SURFACE('',#13835,0.1);+#15368=ADVANCED_FACE('',(#15369),#15376,.F.);+#15369=FACE_BOUND('',#15370,.F.);+#15370=EDGE_LOOP('',(#15371,#14083,#15374,#15375));+#15371=ORIENTED_EDGE('',*,*,#15372,.T.);+#15372=EDGE_CURVE('',#14013,#14079,#15373,.T.);+#15373=LINE('',#14014,#7992);+#15374=ORIENTED_EDGE('',*,*,#14099,.F.);+#15375=ORIENTED_EDGE('',*,*,#14018,.F.);+#15376=PLANE('',#15377);+#15377=AXIS2_PLACEMENT_3D('',#14014,#14562,#11689);+#15378=ADVANCED_FACE('',(#15379),#15386,.F.);+#15379=FACE_BOUND('',#15380,.F.);+#15380=EDGE_LOOP('',(#15381,#14077,#15384,#15385));+#15381=ORIENTED_EDGE('',*,*,#15382,.T.);+#15382=EDGE_CURVE('',#14008,#14074,#15383,.T.);+#15383=LINE('',#14009,#7992);+#15384=ORIENTED_EDGE('',*,*,#15372,.F.);+#15385=ORIENTED_EDGE('',*,*,#14012,.F.);+#15386=CYLINDRICAL_SURFACE('',#14016,1.E-01);+#15387=ADVANCED_FACE('',(#15388),#15395,.F.);+#15388=FACE_BOUND('',#15389,.F.);+#15389=EDGE_LOOP('',(#15390,#14072,#15393,#15394));+#15390=ORIENTED_EDGE('',*,*,#15391,.T.);+#15391=EDGE_CURVE('',#14003,#14069,#15392,.T.);+#15392=LINE('',#14004,#7992);+#15393=ORIENTED_EDGE('',*,*,#15382,.F.);+#15394=ORIENTED_EDGE('',*,*,#14007,.F.);+#15395=PLANE('',#15396);+#15396=AXIS2_PLACEMENT_3D('',#14004,#312,#3785);+#15397=ADVANCED_FACE('',(#15398),#15405,.F.);+#15398=FACE_BOUND('',#15399,.F.);+#15399=EDGE_LOOP('',(#15400,#14067,#15403,#15404));+#15400=ORIENTED_EDGE('',*,*,#15401,.T.);+#15401=EDGE_CURVE('',#13998,#14064,#15402,.T.);+#15402=LINE('',#13999,#7992);+#15403=ORIENTED_EDGE('',*,*,#15391,.F.);+#15404=ORIENTED_EDGE('',*,*,#14002,.F.);+#15405=PLANE('',#15406);+#15406=AXIS2_PLACEMENT_3D('',#13999,#3785,#13);+#15407=ADVANCED_FACE('',(#15408),#15415,.F.);+#15408=FACE_BOUND('',#15409,.F.);+#15409=EDGE_LOOP('',(#15410,#14062,#15413,#15414));+#15410=ORIENTED_EDGE('',*,*,#15411,.T.);+#15411=EDGE_CURVE('',#13991,#14057,#15412,.T.);+#15412=LINE('',#13992,#7992);+#15413=ORIENTED_EDGE('',*,*,#15401,.F.);+#15414=ORIENTED_EDGE('',*,*,#13997,.F.);+#15415=PLANE('',#15416);+#15416=AXIS2_PLACEMENT_3D('',#13992,#13,#11636);+#15417=ADVANCED_FACE('',(#15418),#15425,.T.);+#15418=FACE_BOUND('',#15419,.F.);+#15419=EDGE_LOOP('',(#15420,#14055,#15423,#15424));+#15420=ORIENTED_EDGE('',*,*,#15421,.T.);+#15421=EDGE_CURVE('',#13986,#14052,#15422,.T.);+#15422=LINE('',#13987,#7992);+#15423=ORIENTED_EDGE('',*,*,#15411,.F.);+#15424=ORIENTED_EDGE('',*,*,#13990,.F.);+#15425=CYLINDRICAL_SURFACE('',#15426,0.2);+#15426=AXIS2_PLACEMENT_3D('',#13995,#11644,#11660);+#15427=ADVANCED_FACE('',(#15428),#15435,.F.);+#15428=FACE_BOUND('',#15429,.F.);+#15429=EDGE_LOOP('',(#15430,#14050,#15433,#15434));+#15430=ORIENTED_EDGE('',*,*,#15431,.T.);+#15431=EDGE_CURVE('',#13979,#14045,#15432,.T.);+#15432=LINE('',#13980,#7992);+#15433=ORIENTED_EDGE('',*,*,#15421,.F.);+#15434=ORIENTED_EDGE('',*,*,#13985,.F.);+#15435=PLANE('',#15436);+#15436=AXIS2_PLACEMENT_3D('',#13980,#14622,#11652);+#15437=ADVANCED_FACE('',(#15438),#15443,.F.);+#15438=FACE_BOUND('',#15439,.F.);+#15439=EDGE_LOOP('',(#15440,#14043,#15441,#15442));+#15440=ORIENTED_EDGE('',*,*,#14716,.T.);+#15441=ORIENTED_EDGE('',*,*,#15431,.F.);+#15442=ORIENTED_EDGE('',*,*,#13978,.F.);+#15443=CYLINDRICAL_SURFACE('',#13982,0.1);+#15444=ADVANCED_FACE('',(#15445),#15452,.F.);+#15445=FACE_BOUND('',#15446,.F.);+#15446=EDGE_LOOP('',(#15447,#14230,#15450,#15451));+#15447=ORIENTED_EDGE('',*,*,#15448,.T.);+#15448=EDGE_CURVE('',#14160,#14226,#15449,.T.);+#15449=LINE('',#14161,#7992);+#15450=ORIENTED_EDGE('',*,*,#14246,.F.);+#15451=ORIENTED_EDGE('',*,*,#14165,.F.);+#15452=PLANE('',#15453);+#15453=AXIS2_PLACEMENT_3D('',#14161,#14562,#11689);+#15454=ADVANCED_FACE('',(#15455),#15462,.F.);+#15455=FACE_BOUND('',#15456,.F.);+#15456=EDGE_LOOP('',(#15457,#14224,#15460,#15461));+#15457=ORIENTED_EDGE('',*,*,#15458,.T.);+#15458=EDGE_CURVE('',#14155,#14221,#15459,.T.);+#15459=LINE('',#14156,#7992);+#15460=ORIENTED_EDGE('',*,*,#15448,.F.);+#15461=ORIENTED_EDGE('',*,*,#14159,.F.);+#15462=CYLINDRICAL_SURFACE('',#14163,1.E-01);+#15463=ADVANCED_FACE('',(#15464),#15471,.F.);+#15464=FACE_BOUND('',#15465,.F.);+#15465=EDGE_LOOP('',(#15466,#14219,#15469,#15470));+#15466=ORIENTED_EDGE('',*,*,#15467,.T.);+#15467=EDGE_CURVE('',#14150,#14216,#15468,.T.);+#15468=LINE('',#14151,#7992);+#15469=ORIENTED_EDGE('',*,*,#15458,.F.);+#15470=ORIENTED_EDGE('',*,*,#14154,.F.);+#15471=PLANE('',#15472);+#15472=AXIS2_PLACEMENT_3D('',#14151,#312,#3785);+#15473=ADVANCED_FACE('',(#15474),#15481,.F.);+#15474=FACE_BOUND('',#15475,.F.);+#15475=EDGE_LOOP('',(#15476,#14214,#15479,#15480));+#15476=ORIENTED_EDGE('',*,*,#15477,.T.);+#15477=EDGE_CURVE('',#14145,#14211,#15478,.T.);+#15478=LINE('',#14146,#7992);+#15479=ORIENTED_EDGE('',*,*,#15467,.F.);+#15480=ORIENTED_EDGE('',*,*,#14149,.F.);+#15481=PLANE('',#15482);+#15482=AXIS2_PLACEMENT_3D('',#14146,#3785,#13);+#15483=ADVANCED_FACE('',(#15484),#15491,.F.);+#15484=FACE_BOUND('',#15485,.F.);+#15485=EDGE_LOOP('',(#15486,#14209,#15489,#15490));+#15486=ORIENTED_EDGE('',*,*,#15487,.T.);+#15487=EDGE_CURVE('',#14138,#14204,#15488,.T.);+#15488=LINE('',#14139,#7992);+#15489=ORIENTED_EDGE('',*,*,#15477,.F.);+#15490=ORIENTED_EDGE('',*,*,#14144,.F.);+#15491=PLANE('',#15492);+#15492=AXIS2_PLACEMENT_3D('',#14139,#13,#11636);+#15493=ADVANCED_FACE('',(#15494),#15501,.T.);+#15494=FACE_BOUND('',#15495,.F.);+#15495=EDGE_LOOP('',(#15496,#14202,#15499,#15500));+#15496=ORIENTED_EDGE('',*,*,#15497,.T.);+#15497=EDGE_CURVE('',#14133,#14199,#15498,.T.);+#15498=LINE('',#14134,#7992);+#15499=ORIENTED_EDGE('',*,*,#15487,.F.);+#15500=ORIENTED_EDGE('',*,*,#14137,.F.);+#15501=CYLINDRICAL_SURFACE('',#15502,0.2);+#15502=AXIS2_PLACEMENT_3D('',#14142,#11644,#11660);+#15503=ADVANCED_FACE('',(#15504),#15511,.F.);+#15504=FACE_BOUND('',#15505,.F.);+#15505=EDGE_LOOP('',(#15506,#14197,#15509,#15510));+#15506=ORIENTED_EDGE('',*,*,#15507,.T.);+#15507=EDGE_CURVE('',#14126,#14192,#15508,.T.);+#15508=LINE('',#14127,#7992);+#15509=ORIENTED_EDGE('',*,*,#15497,.F.);+#15510=ORIENTED_EDGE('',*,*,#14132,.F.);+#15511=PLANE('',#15512);+#15512=AXIS2_PLACEMENT_3D('',#14127,#14622,#11652);+#15513=ADVANCED_FACE('',(#15514),#15519,.F.);+#15514=FACE_BOUND('',#15515,.F.);+#15515=EDGE_LOOP('',(#15516,#14190,#15517,#15518));+#15516=ORIENTED_EDGE('',*,*,#14726,.T.);+#15517=ORIENTED_EDGE('',*,*,#15507,.F.);+#15518=ORIENTED_EDGE('',*,*,#14125,.F.);+#15519=CYLINDRICAL_SURFACE('',#14129,0.1);+#15520=ADVANCED_FACE('',(#15521),#15528,.F.);+#15521=FACE_BOUND('',#15522,.F.);+#15522=EDGE_LOOP('',(#15523,#14377,#15526,#15527));+#15523=ORIENTED_EDGE('',*,*,#15524,.T.);+#15524=EDGE_CURVE('',#14307,#14373,#15525,.T.);+#15525=LINE('',#14308,#7992);+#15526=ORIENTED_EDGE('',*,*,#14393,.F.);+#15527=ORIENTED_EDGE('',*,*,#14312,.F.);+#15528=PLANE('',#15529);+#15529=AXIS2_PLACEMENT_3D('',#14308,#14562,#11689);+#15530=ADVANCED_FACE('',(#15531),#15538,.F.);+#15531=FACE_BOUND('',#15532,.F.);+#15532=EDGE_LOOP('',(#15533,#14371,#15536,#15537));+#15533=ORIENTED_EDGE('',*,*,#15534,.T.);+#15534=EDGE_CURVE('',#14302,#14368,#15535,.T.);+#15535=LINE('',#14303,#7992);+#15536=ORIENTED_EDGE('',*,*,#15524,.F.);+#15537=ORIENTED_EDGE('',*,*,#14306,.F.);+#15538=CYLINDRICAL_SURFACE('',#14310,1.E-01);+#15539=ADVANCED_FACE('',(#15540),#15547,.F.);+#15540=FACE_BOUND('',#15541,.F.);+#15541=EDGE_LOOP('',(#15542,#14366,#15545,#15546));+#15542=ORIENTED_EDGE('',*,*,#15543,.T.);+#15543=EDGE_CURVE('',#14297,#14363,#15544,.T.);+#15544=LINE('',#14298,#7992);+#15545=ORIENTED_EDGE('',*,*,#15534,.F.);+#15546=ORIENTED_EDGE('',*,*,#14301,.F.);+#15547=PLANE('',#15548);+#15548=AXIS2_PLACEMENT_3D('',#14298,#312,#3785);+#15549=ADVANCED_FACE('',(#15550),#15557,.F.);+#15550=FACE_BOUND('',#15551,.F.);+#15551=EDGE_LOOP('',(#15552,#14361,#15555,#15556));+#15552=ORIENTED_EDGE('',*,*,#15553,.T.);+#15553=EDGE_CURVE('',#14292,#14358,#15554,.T.);+#15554=LINE('',#14293,#7992);+#15555=ORIENTED_EDGE('',*,*,#15543,.F.);+#15556=ORIENTED_EDGE('',*,*,#14296,.F.);+#15557=PLANE('',#15558);+#15558=AXIS2_PLACEMENT_3D('',#14293,#3785,#13);+#15559=ADVANCED_FACE('',(#15560),#15567,.F.);+#15560=FACE_BOUND('',#15561,.F.);+#15561=EDGE_LOOP('',(#15562,#14356,#15565,#15566));+#15562=ORIENTED_EDGE('',*,*,#15563,.T.);+#15563=EDGE_CURVE('',#14285,#14351,#15564,.T.);+#15564=LINE('',#14286,#7992);+#15565=ORIENTED_EDGE('',*,*,#15553,.F.);+#15566=ORIENTED_EDGE('',*,*,#14291,.F.);+#15567=PLANE('',#15568);+#15568=AXIS2_PLACEMENT_3D('',#14286,#13,#11636);+#15569=ADVANCED_FACE('',(#15570),#15577,.T.);+#15570=FACE_BOUND('',#15571,.F.);+#15571=EDGE_LOOP('',(#15572,#14349,#15575,#15576));+#15572=ORIENTED_EDGE('',*,*,#15573,.T.);+#15573=EDGE_CURVE('',#14280,#14346,#15574,.T.);+#15574=LINE('',#14281,#7992);+#15575=ORIENTED_EDGE('',*,*,#15563,.F.);+#15576=ORIENTED_EDGE('',*,*,#14284,.F.);+#15577=CYLINDRICAL_SURFACE('',#15578,0.2);+#15578=AXIS2_PLACEMENT_3D('',#14289,#11644,#11660);+#15579=ADVANCED_FACE('',(#15580),#15587,.F.);+#15580=FACE_BOUND('',#15581,.F.);+#15581=EDGE_LOOP('',(#15582,#14344,#15585,#15586));+#15582=ORIENTED_EDGE('',*,*,#15583,.T.);+#15583=EDGE_CURVE('',#14273,#14339,#15584,.T.);+#15584=LINE('',#14274,#7992);+#15585=ORIENTED_EDGE('',*,*,#15573,.F.);+#15586=ORIENTED_EDGE('',*,*,#14279,.F.);+#15587=PLANE('',#15588);+#15588=AXIS2_PLACEMENT_3D('',#14274,#14622,#11652);+#15589=ADVANCED_FACE('',(#15590),#15595,.F.);+#15590=FACE_BOUND('',#15591,.F.);+#15591=EDGE_LOOP('',(#15592,#14337,#15593,#15594));+#15592=ORIENTED_EDGE('',*,*,#14736,.T.);+#15593=ORIENTED_EDGE('',*,*,#15583,.F.);+#15594=ORIENTED_EDGE('',*,*,#14272,.F.);+#15595=CYLINDRICAL_SURFACE('',#14276,0.1);+#15596=ADVANCED_FACE('',(#15597),#15604,.F.);+#15597=FACE_BOUND('',#15598,.F.);+#15598=EDGE_LOOP('',(#15599,#14524,#15602,#15603));+#15599=ORIENTED_EDGE('',*,*,#15600,.T.);+#15600=EDGE_CURVE('',#14454,#14520,#15601,.T.);+#15601=LINE('',#14455,#7992);+#15602=ORIENTED_EDGE('',*,*,#14540,.F.);+#15603=ORIENTED_EDGE('',*,*,#14459,.F.);+#15604=PLANE('',#15605);+#15605=AXIS2_PLACEMENT_3D('',#14455,#14562,#11689);+#15606=ADVANCED_FACE('',(#15607),#15614,.F.);+#15607=FACE_BOUND('',#15608,.F.);+#15608=EDGE_LOOP('',(#15609,#14518,#15612,#15613));+#15609=ORIENTED_EDGE('',*,*,#15610,.T.);+#15610=EDGE_CURVE('',#14449,#14515,#15611,.T.);+#15611=LINE('',#14450,#7992);+#15612=ORIENTED_EDGE('',*,*,#15600,.F.);+#15613=ORIENTED_EDGE('',*,*,#14453,.F.);+#15614=CYLINDRICAL_SURFACE('',#14457,1.E-01);+#15615=ADVANCED_FACE('',(#15616),#15623,.F.);+#15616=FACE_BOUND('',#15617,.F.);+#15617=EDGE_LOOP('',(#15618,#14513,#15621,#15622));+#15618=ORIENTED_EDGE('',*,*,#15619,.T.);+#15619=EDGE_CURVE('',#14444,#14510,#15620,.T.);+#15620=LINE('',#14445,#7992);+#15621=ORIENTED_EDGE('',*,*,#15610,.F.);+#15622=ORIENTED_EDGE('',*,*,#14448,.F.);+#15623=PLANE('',#15624);+#15624=AXIS2_PLACEMENT_3D('',#14445,#312,#3785);+#15625=ADVANCED_FACE('',(#15626),#15633,.F.);+#15626=FACE_BOUND('',#15627,.F.);+#15627=EDGE_LOOP('',(#15628,#14508,#15631,#15632));+#15628=ORIENTED_EDGE('',*,*,#15629,.T.);+#15629=EDGE_CURVE('',#14439,#14505,#15630,.T.);+#15630=LINE('',#14440,#7992);+#15631=ORIENTED_EDGE('',*,*,#15619,.F.);+#15632=ORIENTED_EDGE('',*,*,#14443,.F.);+#15633=PLANE('',#15634);+#15634=AXIS2_PLACEMENT_3D('',#14440,#3785,#13);+#15635=ADVANCED_FACE('',(#15636),#15643,.F.);+#15636=FACE_BOUND('',#15637,.F.);+#15637=EDGE_LOOP('',(#15638,#14503,#15641,#15642));+#15638=ORIENTED_EDGE('',*,*,#15639,.T.);+#15639=EDGE_CURVE('',#14432,#14498,#15640,.T.);+#15640=LINE('',#14433,#7992);+#15641=ORIENTED_EDGE('',*,*,#15629,.F.);+#15642=ORIENTED_EDGE('',*,*,#14438,.F.);+#15643=PLANE('',#15644);+#15644=AXIS2_PLACEMENT_3D('',#14433,#13,#11636);+#15645=ADVANCED_FACE('',(#15646),#15653,.T.);+#15646=FACE_BOUND('',#15647,.F.);+#15647=EDGE_LOOP('',(#15648,#14496,#15651,#15652));+#15648=ORIENTED_EDGE('',*,*,#15649,.T.);+#15649=EDGE_CURVE('',#14427,#14493,#15650,.T.);+#15650=LINE('',#14428,#7992);+#15651=ORIENTED_EDGE('',*,*,#15639,.F.);+#15652=ORIENTED_EDGE('',*,*,#14431,.F.);+#15653=CYLINDRICAL_SURFACE('',#15654,0.2);+#15654=AXIS2_PLACEMENT_3D('',#14436,#11644,#11660);+#15655=ADVANCED_FACE('',(#15656),#15663,.F.);+#15656=FACE_BOUND('',#15657,.F.);+#15657=EDGE_LOOP('',(#15658,#14491,#15661,#15662));+#15658=ORIENTED_EDGE('',*,*,#15659,.T.);+#15659=EDGE_CURVE('',#14420,#14486,#15660,.T.);+#15660=LINE('',#14421,#7992);+#15661=ORIENTED_EDGE('',*,*,#15649,.F.);+#15662=ORIENTED_EDGE('',*,*,#14426,.F.);+#15663=PLANE('',#15664);+#15664=AXIS2_PLACEMENT_3D('',#14421,#14622,#11652);+#15665=ADVANCED_FACE('',(#15666),#15671,.F.);+#15666=FACE_BOUND('',#15667,.F.);+#15667=EDGE_LOOP('',(#15668,#14484,#15669,#15670));+#15668=ORIENTED_EDGE('',*,*,#14746,.T.);+#15669=ORIENTED_EDGE('',*,*,#15659,.F.);+#15670=ORIENTED_EDGE('',*,*,#14419,.F.);+#15671=CYLINDRICAL_SURFACE('',#14423,0.1);+#15672=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#15676)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#15673,#15674,#15675)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#15673=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#15674=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#15675=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#15676=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-05),#15673,'distance_accuracy_value','confusion accuracy');+#15677=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#15678=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#15679,#15689,#15690,#15691,#15692,#15701,#15702,#15703,#15704,#15705,#15706,#15707,#15708,#15709,#15710,#15711,#15712,#15713,#15714,#15715,#15716,#15717,#15718,#15719,#15720,#15721,#15722,#15723,#15724,#15725,#15726,#15727,#15728,#15729,#15730,#15731,#15732,#15733,#15734,#15735,#15736,#15737,#15738,#15739,#15740,#15741,#15742,#15743,#15744,#15745,#15746,#15747,#15748,#15749,#15750,#15751,#15752,#15753,#15754,#15755,#15756,#15757,#15758,#15759,#15760,#15761,#15762,#15763,#15764,#15765,#15766,#15767,#15768,#15769,#15770,#15771,#15772,#15773,#15774,#15775,#15776,#15777,#15778,#15779,#15780,#15781,#15782,#15783,#15784,#15785,#15786,#15787,#15788,#15789,#15790,#15791,#15792,#15793,#15794,#15795,#15796,#15797,#15798,#15799,#15800,#15801,#15802,#15803,#15804,#15805,#15806,#15807,#15808,#15809,#15810,#15811,#15812,#15813,#15814,#15815,#15816,#15817,#15818,#15819,#15820,#15821,#15822,#15831,#15832,#15833,#15834,#15835,#15836,#15837,#15838,#15839,#15840,#15841,#15842,#15843,#15844,#15845,#15846,#15847,#15848,#15849,#15850,#15851,#15852,#15853,#15854,#15855,#15856,#15857,#15858,#15859,#15860,#15861,#15862,#15863,#15864,#15865,#15866,#15867,#15868,#15869,#15870,#15871,#15872,#15873,#15874,#15875,#15876,#15877,#15878,#15879,#15880,#15881,#15882,#15883,#15884,#15885,#15886,#15887,#15888,#15889,#15890,#15891,#15892,#15893,#15894,#15895,#15896,#15897,#15898,#15899,#15900,#15901,#15902,#15903,#15904,#15905,#15906,#15907,#15908,#15909,#15910,#15911,#15912,#15913,#15914,#15915,#15916,#15917,#15918,#15919,#15920,#15921,#15922,#15923,#15924,#15925,#15926,#15927,#15928,#15929,#15930,#15931,#15932,#15933,#15934,#15935,#15936,#15937,#15938,#15939,#15940,#15941,#15942,#15943,#15944,#15945,#15946,#15947,#15948,#15949,#15950,#15951,#15952,#15953,#15954,#15955,#15956,#15957,#15958,#15959,#15960,#15961,#15962,#15963,#15964,#15965,#15966,#15967,#15968,#15969,#15970,#15971,#15972,#15973,#15974,#15975,#15976,#15977,#15978,#15979,#15980,#15981,#15982,#15983,#15984,#15985,#15986,#15987,#15988,#15989,#15990,#15991,#15992,#15993,#15994,#15995,#15996,#15997,#15998,#15999,#16000,#16001,#16002,#16003,#16004,#16005,#16006,#16007,#16008,#16009,#16010,#16011,#16012,#16013,#16014,#16015,#16016,#16017,#16018,#16019,#16020,#16021,#16022,#16023,#16024,#16025,#16026,#16027,#16028,#16029,#16030,#16031,#16032,#16033,#16034,#16035,#16036,#16037,#16038,#16039,#16040,#16041,#16042,#16043,#16044,#16045,#16046,#16047,#16048,#16049,#16050,#16051,#16052,#16053,#16054,#16055,#16056,#16057,#16058,#16059,#16060,#16061,#16062,#16063,#16064,#16065,#16066,#16067,#16068,#16069,#16070,#16071,#16072,#16073,#16074,#16075,#16076,#16077,#16078,#16079,#16080,#16081,#16082,#16083,#16084,#16085,#16086,#16087,#16088,#16089,#16090,#16091,#16092,#16093,#16094,#16095,#16096,#16097,#16098,#16099,#16100,#16101,#16102,#16103,#16104,#16105,#16106,#16107,#16108,#16109,#16110,#16111,#16112,#16113,#16114,#16115,#16116,#16117,#16118,#16119,#16120,#16121,#16122,#16123,#16124,#16125,#16126,#16127,#16128,#16129,#16130,#16131,#16132,#16133,#16134,#16135,#16136,#16137,#16138,#16139,#16140,#16141,#16142,#16143,#16144,#16145,#16146,#16147,#16148,#16149,#16150,#16151,#16152,#16153,#16154,#16155,#16156,#16157,#16158,#16159,#16160,#16161,#16162,#16163,#16164,#16165,#16166,#16167,#16168,#16169,#16170,#16171,#16172,#16173,#16174,#16175,#16176,#16177,#16178,#16179,#16180,#16181,#16182,#16183,#16184,#16185,#16186,#16187,#16188,#16189,#16190,#16191,#16192,#16193,#16194,#16195,#16196,#16197,#16198,#16199,#16200,#16201,#16202,#16203,#16204,#16205,#16206,#16207,#16208,#16209,#16210,#16211,#16212,#16213,#16214,#16215,#16216,#16217,#16218,#16219,#16220,#16221,#16222,#16223,#16224,#16225,#16226,#16227,#16228,#16229,#16230,#16231,#16232,#16233,#16234,#16235,#16236,#16237,#16238,#16239,#16240,#16241,#16242,#16243,#16244,#16245,#16246,#16247,#16248,#16249,#16250,#16251,#16252,#16253,#16254,#16255,#16256,#16257,#16258,#16259,#16260,#16261,#16262,#16263,#16264,#16265,#16266,#16267,#16268,#16269,#16270,#16271,#16272,#16273,#16274,#16275,#16276,#16277,#16278,#16279,#16280,#16281,#16282,#16283,#16284,#16285,#16286,#16287,#16288,#16289,#16290,#16291,#16292,#16293,#16294,#16295,#16296,#16297,#16298,#16299,#16300,#16301,#16302,#16303,#16304,#16305,#16306,#16307,#16308,#16309,#16310,#16311,#16312,#16313,#16314,#16315,#16316,#16317,#16318,#16319,#16320,#16321,#16322,#16323,#16324,#16325,#16326,#16327,#16328,#16329,#16330,#16331,#16332,#16333,#16334,#16335,#16336,#16337,#16338,#16339,#16340,#16341,#16342,#16343,#16344,#16345,#16346,#16347,#16348,#16349,#16350,#16351,#16352,#16353,#16354,#16355,#16356,#16357,#16358,#16359,#16360,#16361,#16362,#16363,#16364,#16365,#16366,#16367,#16368,#16369,#16370,#16371,#16372,#16373,#16374,#16375,#16376,#16377,#16378,#16379,#16380,#16381,#16382,#16383,#16384,#16385,#16386,#16387,#16388,#16389,#16390,#16391,#16392,#16393,#16394,#16395,#16396,#16397,#16398,#16399,#16400,#16401,#16402,#16403,#16404,#16405,#16406,#16407,#16408,#16409,#16410,#16411,#16412,#16413,#16414,#16415,#16416,#16417,#16418,#16419,#16420,#16421,#16422,#16423,#16424,#16425,#16426,#16427,#16428,#16429,#16430,#16431,#16432,#16433,#16434,#16435,#16436,#16437,#16438,#16439,#16440,#16441,#16442,#16443,#16444,#16445,#16446,#16447,#16448,#16449,#16450,#16451,#16452,#16453,#16454,#16455,#16456,#16457,#16458,#16459,#16460,#16461,#16462,#16463,#16464,#16465,#16466,#16467,#16468,#16469,#16470,#16471,#16472,#16473,#16474,#16475,#16476,#16477,#16478,#16479,#16480,#16481,#16482,#16483,#16484,#16485,#16486,#16487,#16488,#16489,#16490,#16491,#16492,#16493,#16494,#16495,#16496,#16497,#16498,#16499,#16500,#16501,#16502,#16503,#16504,#16505,#16506,#16507,#16508,#16509,#16510,#16511,#16512,#16513,#16514,#16515,#16516,#16517,#16518),#15672);+#15679=STYLED_ITEM('color',(#15680),#17);+#15680=PRESENTATION_STYLE_ASSIGNMENT((#15681,#15687));+#15681=SURFACE_STYLE_USAGE(.BOTH.,#15682);+#15682=SURFACE_SIDE_STYLE('',(#15683));+#15683=SURFACE_STYLE_FILL_AREA(#15684);+#15684=FILL_AREA_STYLE('',(#15685));+#15685=FILL_AREA_STYLE_COLOUR('',#15686);+#15686=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#15687=CURVE_STYLE('',#15688,POSITIVE_LENGTH_MEASURE(0.1),#15686);+#15688=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#15689=STYLED_ITEM('color',(#15680),#154);+#15690=STYLED_ITEM('color',(#15680),#180);+#15691=STYLED_ITEM('color',(#15680),#234);+#15692=STYLED_ITEM('color',(#15693),#288);+#15693=PRESENTATION_STYLE_ASSIGNMENT((#15694,#15700));+#15694=SURFACE_STYLE_USAGE(.BOTH.,#15695);+#15695=SURFACE_SIDE_STYLE('',(#15696));+#15696=SURFACE_STYLE_FILL_AREA(#15697);+#15697=FILL_AREA_STYLE('',(#15698));+#15698=FILL_AREA_STYLE_COLOUR('',#15699);+#15699=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#15700=CURVE_STYLE('',#15688,POSITIVE_LENGTH_MEASURE(0.1),#15699);+#15701=STYLED_ITEM('color',(#15680),#313);+#15702=STYLED_ITEM('color',(#15693),#326);+#15703=STYLED_ITEM('color',(#15680),#348);+#15704=STYLED_ITEM('color',(#15693),#361);+#15705=STYLED_ITEM('color',(#15680),#383);+#15706=STYLED_ITEM('color',(#15693),#396);+#15707=STYLED_ITEM('color',(#15680),#418);+#15708=STYLED_ITEM('color',(#15693),#431);+#15709=STYLED_ITEM('color',(#15680),#453);+#15710=STYLED_ITEM('color',(#15693),#466);+#15711=STYLED_ITEM('color',(#15680),#488);+#15712=STYLED_ITEM('color',(#15693),#501);+#15713=STYLED_ITEM('color',(#15680),#523);+#15714=STYLED_ITEM('color',(#15693),#536);+#15715=STYLED_ITEM('color',(#15680),#558);+#15716=STYLED_ITEM('color',(#15693),#571);+#15717=STYLED_ITEM('color',(#15680),#593);+#15718=STYLED_ITEM('color',(#15693),#606);+#15719=STYLED_ITEM('color',(#15680),#628);+#15720=STYLED_ITEM('color',(#15693),#641);+#15721=STYLED_ITEM('color',(#15680),#663);+#15722=STYLED_ITEM('color',(#15693),#676);+#15723=STYLED_ITEM('color',(#15680),#698);+#15724=STYLED_ITEM('color',(#15693),#711);+#15725=STYLED_ITEM('color',(#15680),#733);+#15726=STYLED_ITEM('color',(#15680),#766);+#15727=STYLED_ITEM('color',(#15680),#786);+#15728=STYLED_ITEM('color',(#15680),#910);+#15729=STYLED_ITEM('color',(#15680),#942);+#15730=STYLED_ITEM('color',(#15680),#979);+#15731=STYLED_ITEM('color',(#15680),#1046);+#15732=STYLED_ITEM('color',(#15680),#1065);+#15733=STYLED_ITEM('color',(#15693),#1083);+#15734=STYLED_ITEM('color',(#15680),#1110);+#15735=STYLED_ITEM('color',(#15680),#1230);+#15736=STYLED_ITEM('color',(#15693),#1246);+#15737=STYLED_ITEM('color',(#15693),#1321);+#15738=STYLED_ITEM('color',(#15693),#1388);+#15739=STYLED_ITEM('color',(#15680),#1398);+#15740=STYLED_ITEM('color',(#15693),#1410);+#15741=STYLED_ITEM('color',(#15693),#1473);+#15742=STYLED_ITEM('color',(#15693),#1540);+#15743=STYLED_ITEM('color',(#15680),#1550);+#15744=STYLED_ITEM('color',(#15693),#1562);+#15745=STYLED_ITEM('color',(#15693),#1625);+#15746=STYLED_ITEM('color',(#15693),#1692);+#15747=STYLED_ITEM('color',(#15680),#1702);+#15748=STYLED_ITEM('color',(#15693),#1714);+#15749=STYLED_ITEM('color',(#15693),#1777);+#15750=STYLED_ITEM('color',(#15693),#1844);+#15751=STYLED_ITEM('color',(#15680),#1854);+#15752=STYLED_ITEM('color',(#15693),#1866);+#15753=STYLED_ITEM('color',(#15693),#1929);+#15754=STYLED_ITEM('color',(#15693),#1996);+#15755=STYLED_ITEM('color',(#15680),#2006);+#15756=STYLED_ITEM('color',(#15693),#2018);+#15757=STYLED_ITEM('color',(#15693),#2081);+#15758=STYLED_ITEM('color',(#15693),#2148);+#15759=STYLED_ITEM('color',(#15680),#2158);+#15760=STYLED_ITEM('color',(#15693),#2170);+#15761=STYLED_ITEM('color',(#15693),#2233);+#15762=STYLED_ITEM('color',(#15693),#2300);+#15763=STYLED_ITEM('color',(#15680),#2310);+#15764=STYLED_ITEM('color',(#15693),#2322);+#15765=STYLED_ITEM('color',(#15693),#2385);+#15766=STYLED_ITEM('color',(#15693),#2452);+#15767=STYLED_ITEM('color',(#15680),#2462);+#15768=STYLED_ITEM('color',(#15693),#2474);+#15769=STYLED_ITEM('color',(#15693),#2537);+#15770=STYLED_ITEM('color',(#15693),#2604);+#15771=STYLED_ITEM('color',(#15680),#2614);+#15772=STYLED_ITEM('color',(#15693),#2626);+#15773=STYLED_ITEM('color',(#15693),#2689);+#15774=STYLED_ITEM('color',(#15693),#2756);+#15775=STYLED_ITEM('color',(#15680),#2766);+#15776=STYLED_ITEM('color',(#15693),#2778);+#15777=STYLED_ITEM('color',(#15693),#2841);+#15778=STYLED_ITEM('color',(#15693),#2908);+#15779=STYLED_ITEM('color',(#15680),#2918);+#15780=STYLED_ITEM('color',(#15693),#2930);+#15781=STYLED_ITEM('color',(#15693),#2993);+#15782=STYLED_ITEM('color',(#15693),#3060);+#15783=STYLED_ITEM('color',(#15680),#3070);+#15784=STYLED_ITEM('color',(#15693),#3082);+#15785=STYLED_ITEM('color',(#15693),#3145);+#15786=STYLED_ITEM('color',(#15693),#3212);+#15787=STYLED_ITEM('color',(#15693),#3222);+#15788=STYLED_ITEM('color',(#15680),#3244);+#15789=STYLED_ITEM('color',(#15680),#3264);+#15790=STYLED_ITEM('color',(#15680),#3280);+#15791=STYLED_ITEM('color',(#15680),#3287);+#15792=STYLED_ITEM('color',(#15680),#3312);+#15793=STYLED_ITEM('color',(#15680),#3340);+#15794=STYLED_ITEM('color',(#15693),#3353);+#15795=STYLED_ITEM('color',(#15680),#3375);+#15796=STYLED_ITEM('color',(#15693),#3388);+#15797=STYLED_ITEM('color',(#15680),#3410);+#15798=STYLED_ITEM('color',(#15693),#3423);+#15799=STYLED_ITEM('color',(#15680),#3445);+#15800=STYLED_ITEM('color',(#15693),#3458);+#15801=STYLED_ITEM('color',(#15680),#3480);+#15802=STYLED_ITEM('color',(#15693),#3493);+#15803=STYLED_ITEM('color',(#15680),#3515);+#15804=STYLED_ITEM('color',(#15693),#3528);+#15805=STYLED_ITEM('color',(#15680),#3550);+#15806=STYLED_ITEM('color',(#15693),#3563);+#15807=STYLED_ITEM('color',(#15680),#3585);+#15808=STYLED_ITEM('color',(#15693),#3598);+#15809=STYLED_ITEM('color',(#15680),#3620);+#15810=STYLED_ITEM('color',(#15693),#3633);+#15811=STYLED_ITEM('color',(#15680),#3655);+#15812=STYLED_ITEM('color',(#15693),#3668);+#15813=STYLED_ITEM('color',(#15680),#3690);+#15814=STYLED_ITEM('color',(#15693),#3703);+#15815=STYLED_ITEM('color',(#15680),#3725);+#15816=STYLED_ITEM('color',(#15693),#3738);+#15817=STYLED_ITEM('color',(#15680),#3760);+#15818=STYLED_ITEM('color',(#15680),#3791);+#15819=STYLED_ITEM('color',(#15680),#3814);+#15820=STYLED_ITEM('color',(#15680),#3852);+#15821=STYLED_ITEM('color',(#15680),#3875);+#15822=STYLED_ITEM('color',(#15823),#3895);+#15823=PRESENTATION_STYLE_ASSIGNMENT((#15824,#15830));+#15824=SURFACE_STYLE_USAGE(.BOTH.,#15825);+#15825=SURFACE_SIDE_STYLE('',(#15826));+#15826=SURFACE_STYLE_FILL_AREA(#15827);+#15827=FILL_AREA_STYLE('',(#15828));+#15828=FILL_AREA_STYLE_COLOUR('',#15829);+#15829=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#15830=CURVE_STYLE('',#15688,POSITIVE_LENGTH_MEASURE(0.1),#15829);+#15831=STYLED_ITEM('color',(#15680),#3901);+#15832=STYLED_ITEM('color',(#15693),#3919);+#15833=STYLED_ITEM('color',(#15680),#3992);+#15834=STYLED_ITEM('color',(#15693),#4109);+#15835=STYLED_ITEM('color',(#15680),#4175);+#15836=STYLED_ITEM('color',(#15693),#4188);+#15837=STYLED_ITEM('color',(#15680),#4198);+#15838=STYLED_ITEM('color',(#15693),#4235);+#15839=STYLED_ITEM('color',(#15680),#4257);+#15840=STYLED_ITEM('color',(#15693),#4270);+#15841=STYLED_ITEM('color',(#15680),#4292);+#15842=STYLED_ITEM('color',(#15693),#4305);+#15843=STYLED_ITEM('color',(#15680),#4327);+#15844=STYLED_ITEM('color',(#15693),#4340);+#15845=STYLED_ITEM('color',(#15680),#4362);+#15846=STYLED_ITEM('color',(#15693),#4375);+#15847=STYLED_ITEM('color',(#15680),#4397);+#15848=STYLED_ITEM('color',(#15693),#4410);+#15849=STYLED_ITEM('color',(#15680),#4432);+#15850=STYLED_ITEM('color',(#15693),#4445);+#15851=STYLED_ITEM('color',(#15680),#4467);+#15852=STYLED_ITEM('color',(#15693),#4480);+#15853=STYLED_ITEM('color',(#15680),#4502);+#15854=STYLED_ITEM('color',(#15693),#4515);+#15855=STYLED_ITEM('color',(#15680),#4537);+#15856=STYLED_ITEM('color',(#15693),#4550);+#15857=STYLED_ITEM('color',(#15680),#4572);+#15858=STYLED_ITEM('color',(#15693),#4585);+#15859=STYLED_ITEM('color',(#15680),#4607);+#15860=STYLED_ITEM('color',(#15693),#4620);+#15861=STYLED_ITEM('color',(#15680),#4637);+#15862=STYLED_ITEM('color',(#15680),#4647);+#15863=STYLED_ITEM('color',(#15693),#4700);+#15864=STYLED_ITEM('color',(#15693),#4711);+#15865=STYLED_ITEM('color',(#15693),#4721);+#15866=STYLED_ITEM('color',(#15693),#4731);+#15867=STYLED_ITEM('color',(#15693),#4741);+#15868=STYLED_ITEM('color',(#15693),#4751);+#15869=STYLED_ITEM('color',(#15693),#4761);+#15870=STYLED_ITEM('color',(#15693),#4772);+#15871=STYLED_ITEM('color',(#15693),#4781);+#15872=STYLED_ITEM('color',(#15693),#4789);+#15873=STYLED_ITEM('color',(#15693),#4799);+#15874=STYLED_ITEM('color',(#15693),#4809);+#15875=STYLED_ITEM('color',(#15693),#4819);+#15876=STYLED_ITEM('color',(#15693),#4829);+#15877=STYLED_ITEM('color',(#15693),#4839);+#15878=STYLED_ITEM('color',(#15693),#4849);+#15879=STYLED_ITEM('color',(#15693),#4859);+#15880=STYLED_ITEM('color',(#15693),#4868);+#15881=STYLED_ITEM('color',(#15693),#4876);+#15882=STYLED_ITEM('color',(#15693),#4886);+#15883=STYLED_ITEM('color',(#15693),#4896);+#15884=STYLED_ITEM('color',(#15693),#4906);+#15885=STYLED_ITEM('color',(#15693),#4916);+#15886=STYLED_ITEM('color',(#15693),#4926);+#15887=STYLED_ITEM('color',(#15693),#4936);+#15888=STYLED_ITEM('color',(#15693),#4946);+#15889=STYLED_ITEM('color',(#15693),#4955);+#15890=STYLED_ITEM('color',(#15693),#4963);+#15891=STYLED_ITEM('color',(#15693),#4973);+#15892=STYLED_ITEM('color',(#15693),#4983);+#15893=STYLED_ITEM('color',(#15693),#4993);+#15894=STYLED_ITEM('color',(#15693),#5003);+#15895=STYLED_ITEM('color',(#15693),#5013);+#15896=STYLED_ITEM('color',(#15693),#5023);+#15897=STYLED_ITEM('color',(#15693),#5033);+#15898=STYLED_ITEM('color',(#15693),#5042);+#15899=STYLED_ITEM('color',(#15693),#5050);+#15900=STYLED_ITEM('color',(#15693),#5060);+#15901=STYLED_ITEM('color',(#15693),#5070);+#15902=STYLED_ITEM('color',(#15693),#5080);+#15903=STYLED_ITEM('color',(#15693),#5090);+#15904=STYLED_ITEM('color',(#15693),#5100);+#15905=STYLED_ITEM('color',(#15693),#5110);+#15906=STYLED_ITEM('color',(#15693),#5120);+#15907=STYLED_ITEM('color',(#15693),#5129);+#15908=STYLED_ITEM('color',(#15693),#5137);+#15909=STYLED_ITEM('color',(#15693),#5147);+#15910=STYLED_ITEM('color',(#15693),#5157);+#15911=STYLED_ITEM('color',(#15693),#5167);+#15912=STYLED_ITEM('color',(#15693),#5177);+#15913=STYLED_ITEM('color',(#15693),#5187);+#15914=STYLED_ITEM('color',(#15693),#5197);+#15915=STYLED_ITEM('color',(#15693),#5207);+#15916=STYLED_ITEM('color',(#15693),#5216);+#15917=STYLED_ITEM('color',(#15693),#5224);+#15918=STYLED_ITEM('color',(#15693),#5234);+#15919=STYLED_ITEM('color',(#15693),#5244);+#15920=STYLED_ITEM('color',(#15693),#5254);+#15921=STYLED_ITEM('color',(#15693),#5264);+#15922=STYLED_ITEM('color',(#15693),#5274);+#15923=STYLED_ITEM('color',(#15693),#5284);+#15924=STYLED_ITEM('color',(#15693),#5294);+#15925=STYLED_ITEM('color',(#15693),#5303);+#15926=STYLED_ITEM('color',(#15693),#5311);+#15927=STYLED_ITEM('color',(#15693),#5321);+#15928=STYLED_ITEM('color',(#15693),#5331);+#15929=STYLED_ITEM('color',(#15693),#5341);+#15930=STYLED_ITEM('color',(#15693),#5351);+#15931=STYLED_ITEM('color',(#15693),#5361);+#15932=STYLED_ITEM('color',(#15693),#5371);+#15933=STYLED_ITEM('color',(#15693),#5381);+#15934=STYLED_ITEM('color',(#15693),#5390);+#15935=STYLED_ITEM('color',(#15693),#5398);+#15936=STYLED_ITEM('color',(#15693),#5408);+#15937=STYLED_ITEM('color',(#15693),#5418);+#15938=STYLED_ITEM('color',(#15693),#5428);+#15939=STYLED_ITEM('color',(#15693),#5438);+#15940=STYLED_ITEM('color',(#15693),#5448);+#15941=STYLED_ITEM('color',(#15693),#5458);+#15942=STYLED_ITEM('color',(#15693),#5468);+#15943=STYLED_ITEM('color',(#15693),#5477);+#15944=STYLED_ITEM('color',(#15693),#5485);+#15945=STYLED_ITEM('color',(#15693),#5495);+#15946=STYLED_ITEM('color',(#15693),#5505);+#15947=STYLED_ITEM('color',(#15693),#5515);+#15948=STYLED_ITEM('color',(#15693),#5525);+#15949=STYLED_ITEM('color',(#15693),#5535);+#15950=STYLED_ITEM('color',(#15693),#5545);+#15951=STYLED_ITEM('color',(#15693),#5555);+#15952=STYLED_ITEM('color',(#15693),#5564);+#15953=STYLED_ITEM('color',(#15693),#5572);+#15954=STYLED_ITEM('color',(#15693),#5582);+#15955=STYLED_ITEM('color',(#15693),#5592);+#15956=STYLED_ITEM('color',(#15693),#5602);+#15957=STYLED_ITEM('color',(#15693),#5612);+#15958=STYLED_ITEM('color',(#15693),#5622);+#15959=STYLED_ITEM('color',(#15693),#5632);+#15960=STYLED_ITEM('color',(#15693),#5642);+#15961=STYLED_ITEM('color',(#15693),#5651);+#15962=STYLED_ITEM('color',(#15693),#5659);+#15963=STYLED_ITEM('color',(#15693),#5669);+#15964=STYLED_ITEM('color',(#15693),#5679);+#15965=STYLED_ITEM('color',(#15693),#5689);+#15966=STYLED_ITEM('color',(#15693),#5699);+#15967=STYLED_ITEM('color',(#15693),#5709);+#15968=STYLED_ITEM('color',(#15693),#5719);+#15969=STYLED_ITEM('color',(#15693),#5729);+#15970=STYLED_ITEM('color',(#15693),#5738);+#15971=STYLED_ITEM('color',(#15693),#5746);+#15972=STYLED_ITEM('color',(#15693),#5756);+#15973=STYLED_ITEM('color',(#15693),#5766);+#15974=STYLED_ITEM('color',(#15693),#5776);+#15975=STYLED_ITEM('color',(#15693),#5786);+#15976=STYLED_ITEM('color',(#15693),#5796);+#15977=STYLED_ITEM('color',(#15693),#5806);+#15978=STYLED_ITEM('color',(#15693),#5816);+#15979=STYLED_ITEM('color',(#15693),#5825);+#15980=STYLED_ITEM('color',(#15693),#5833);+#15981=STYLED_ITEM('color',(#15693),#5904);+#15982=STYLED_ITEM('color',(#15693),#5971);+#15983=STYLED_ITEM('color',(#15680),#5981);+#15984=STYLED_ITEM('color',(#15680),#6101);+#15985=STYLED_ITEM('color',(#15680),#6111);+#15986=STYLED_ITEM('color',(#15680),#6217);+#15987=STYLED_ITEM('color',(#15693),#6226);+#15988=STYLED_ITEM('color',(#15693),#6289);+#15989=STYLED_ITEM('color',(#15693),#6354);+#15990=STYLED_ITEM('color',(#15680),#6364);+#15991=STYLED_ITEM('color',(#15693),#6373);+#15992=STYLED_ITEM('color',(#15693),#6436);+#15993=STYLED_ITEM('color',(#15693),#6501);+#15994=STYLED_ITEM('color',(#15680),#6511);+#15995=STYLED_ITEM('color',(#15693),#6520);+#15996=STYLED_ITEM('color',(#15693),#6583);+#15997=STYLED_ITEM('color',(#15693),#6648);+#15998=STYLED_ITEM('color',(#15680),#6658);+#15999=STYLED_ITEM('color',(#15693),#6667);+#16000=STYLED_ITEM('color',(#15693),#6730);+#16001=STYLED_ITEM('color',(#15693),#6795);+#16002=STYLED_ITEM('color',(#15680),#6805);+#16003=STYLED_ITEM('color',(#15693),#6814);+#16004=STYLED_ITEM('color',(#15693),#6877);+#16005=STYLED_ITEM('color',(#15693),#6942);+#16006=STYLED_ITEM('color',(#15680),#6952);+#16007=STYLED_ITEM('color',(#15693),#6961);+#16008=STYLED_ITEM('color',(#15693),#7024);+#16009=STYLED_ITEM('color',(#15693),#7089);+#16010=STYLED_ITEM('color',(#15680),#7099);+#16011=STYLED_ITEM('color',(#15693),#7108);+#16012=STYLED_ITEM('color',(#15693),#7171);+#16013=STYLED_ITEM('color',(#15693),#7236);+#16014=STYLED_ITEM('color',(#15680),#7246);+#16015=STYLED_ITEM('color',(#15693),#7255);+#16016=STYLED_ITEM('color',(#15693),#7318);+#16017=STYLED_ITEM('color',(#15693),#7383);+#16018=STYLED_ITEM('color',(#15680),#7393);+#16019=STYLED_ITEM('color',(#15693),#7402);+#16020=STYLED_ITEM('color',(#15693),#7465);+#16021=STYLED_ITEM('color',(#15693),#7530);+#16022=STYLED_ITEM('color',(#15680),#7540);+#16023=STYLED_ITEM('color',(#15693),#7549);+#16024=STYLED_ITEM('color',(#15693),#7612);+#16025=STYLED_ITEM('color',(#15693),#7677);+#16026=STYLED_ITEM('color',(#15680),#7687);+#16027=STYLED_ITEM('color',(#15693),#7696);+#16028=STYLED_ITEM('color',(#15693),#7759);+#16029=STYLED_ITEM('color',(#15693),#7824);+#16030=STYLED_ITEM('color',(#15680),#7834);+#16031=STYLED_ITEM('color',(#15693),#7843);+#16032=STYLED_ITEM('color',(#15693),#7906);+#16033=STYLED_ITEM('color',(#15693),#7971);+#16034=STYLED_ITEM('color',(#15693),#7981);+#16035=STYLED_ITEM('color',(#15680),#8005);+#16036=STYLED_ITEM('color',(#15680),#8025);+#16037=STYLED_ITEM('color',(#15680),#8038);+#16038=STYLED_ITEM('color',(#15680),#8044);+#16039=STYLED_ITEM('color',(#15693),#8063);+#16040=STYLED_ITEM('color',(#15693),#8074);+#16041=STYLED_ITEM('color',(#15693),#8083);+#16042=STYLED_ITEM('color',(#15693),#8093);+#16043=STYLED_ITEM('color',(#15693),#8103);+#16044=STYLED_ITEM('color',(#15693),#8113);+#16045=STYLED_ITEM('color',(#15693),#8123);+#16046=STYLED_ITEM('color',(#15693),#8134);+#16047=STYLED_ITEM('color',(#15693),#8143);+#16048=STYLED_ITEM('color',(#15680),#8151);+#16049=STYLED_ITEM('color',(#15693),#8163);+#16050=STYLED_ITEM('color',(#15680),#8184);+#16051=STYLED_ITEM('color',(#15693),#8197);+#16052=STYLED_ITEM('color',(#15680),#8218);+#16053=STYLED_ITEM('color',(#15693),#8231);+#16054=STYLED_ITEM('color',(#15680),#8252);+#16055=STYLED_ITEM('color',(#15693),#8265);+#16056=STYLED_ITEM('color',(#15680),#8286);+#16057=STYLED_ITEM('color',(#15693),#8299);+#16058=STYLED_ITEM('color',(#15680),#8320);+#16059=STYLED_ITEM('color',(#15693),#8333);+#16060=STYLED_ITEM('color',(#15680),#8354);+#16061=STYLED_ITEM('color',(#15693),#8367);+#16062=STYLED_ITEM('color',(#15680),#8388);+#16063=STYLED_ITEM('color',(#15693),#8401);+#16064=STYLED_ITEM('color',(#15680),#8422);+#16065=STYLED_ITEM('color',(#15693),#8435);+#16066=STYLED_ITEM('color',(#15680),#8456);+#16067=STYLED_ITEM('color',(#15693),#8469);+#16068=STYLED_ITEM('color',(#15680),#8490);+#16069=STYLED_ITEM('color',(#15693),#8503);+#16070=STYLED_ITEM('color',(#15680),#8524);+#16071=STYLED_ITEM('color',(#15693),#8537);+#16072=STYLED_ITEM('color',(#15680),#8558);+#16073=STYLED_ITEM('color',(#15680),#8568);+#16074=STYLED_ITEM('color',(#15680),#8581);+#16075=STYLED_ITEM('color',(#15680),#8592);+#16076=STYLED_ITEM('color',(#15693),#8605);+#16077=STYLED_ITEM('color',(#15693),#8627);+#16078=STYLED_ITEM('color',(#15693),#8685);+#16079=STYLED_ITEM('color',(#15693),#8740);+#16080=STYLED_ITEM('color',(#15693),#8750);+#16081=STYLED_ITEM('color',(#15693),#8808);+#16082=STYLED_ITEM('color',(#15693),#8863);+#16083=STYLED_ITEM('color',(#15693),#8873);+#16084=STYLED_ITEM('color',(#15693),#8931);+#16085=STYLED_ITEM('color',(#15693),#8986);+#16086=STYLED_ITEM('color',(#15693),#8996);+#16087=STYLED_ITEM('color',(#15693),#9054);+#16088=STYLED_ITEM('color',(#15693),#9109);+#16089=STYLED_ITEM('color',(#15693),#9119);+#16090=STYLED_ITEM('color',(#15693),#9177);+#16091=STYLED_ITEM('color',(#15693),#9232);+#16092=STYLED_ITEM('color',(#15693),#9242);+#16093=STYLED_ITEM('color',(#15693),#9300);+#16094=STYLED_ITEM('color',(#15693),#9355);+#16095=STYLED_ITEM('color',(#15693),#9365);+#16096=STYLED_ITEM('color',(#15693),#9423);+#16097=STYLED_ITEM('color',(#15693),#9478);+#16098=STYLED_ITEM('color',(#15693),#9488);+#16099=STYLED_ITEM('color',(#15693),#9546);+#16100=STYLED_ITEM('color',(#15693),#9601);+#16101=STYLED_ITEM('color',(#15693),#9611);+#16102=STYLED_ITEM('color',(#15693),#9669);+#16103=STYLED_ITEM('color',(#15693),#9724);+#16104=STYLED_ITEM('color',(#15693),#9734);+#16105=STYLED_ITEM('color',(#15693),#9792);+#16106=STYLED_ITEM('color',(#15693),#9847);+#16107=STYLED_ITEM('color',(#15693),#9857);+#16108=STYLED_ITEM('color',(#15693),#9915);+#16109=STYLED_ITEM('color',(#15693),#9970);+#16110=STYLED_ITEM('color',(#15693),#9980);+#16111=STYLED_ITEM('color',(#15693),#10038);+#16112=STYLED_ITEM('color',(#15693),#10093);+#16113=STYLED_ITEM('color',(#15693),#10103);+#16114=STYLED_ITEM('color',(#15693),#10114);+#16115=STYLED_ITEM('color',(#15693),#10123);+#16116=STYLED_ITEM('color',(#15693),#10133);+#16117=STYLED_ITEM('color',(#15693),#10143);+#16118=STYLED_ITEM('color',(#15693),#10153);+#16119=STYLED_ITEM('color',(#15693),#10163);+#16120=STYLED_ITEM('color',(#15693),#10174);+#16121=STYLED_ITEM('color',(#15693),#10183);+#16122=STYLED_ITEM('color',(#15680),#10191);+#16123=STYLED_ITEM('color',(#15693),#10200);+#16124=STYLED_ITEM('color',(#15693),#10210);+#16125=STYLED_ITEM('color',(#15693),#10220);+#16126=STYLED_ITEM('color',(#15693),#10230);+#16127=STYLED_ITEM('color',(#15693),#10240);+#16128=STYLED_ITEM('color',(#15693),#10250);+#16129=STYLED_ITEM('color',(#15693),#10260);+#16130=STYLED_ITEM('color',(#15693),#10270);+#16131=STYLED_ITEM('color',(#15693),#10280);+#16132=STYLED_ITEM('color',(#15693),#10290);+#16133=STYLED_ITEM('color',(#15693),#10300);+#16134=STYLED_ITEM('color',(#15693),#10310);+#16135=STYLED_ITEM('color',(#15680),#10320);+#16136=STYLED_ITEM('color',(#15693),#10333);+#16137=STYLED_ITEM('color',(#15680),#10355);+#16138=STYLED_ITEM('color',(#15693),#10368);+#16139=STYLED_ITEM('color',(#15680),#10390);+#16140=STYLED_ITEM('color',(#15693),#10403);+#16141=STYLED_ITEM('color',(#15680),#10425);+#16142=STYLED_ITEM('color',(#15693),#10438);+#16143=STYLED_ITEM('color',(#15680),#10460);+#16144=STYLED_ITEM('color',(#15693),#10473);+#16145=STYLED_ITEM('color',(#15680),#10495);+#16146=STYLED_ITEM('color',(#15693),#10508);+#16147=STYLED_ITEM('color',(#15680),#10530);+#16148=STYLED_ITEM('color',(#15693),#10543);+#16149=STYLED_ITEM('color',(#15680),#10565);+#16150=STYLED_ITEM('color',(#15693),#10578);+#16151=STYLED_ITEM('color',(#15680),#10600);+#16152=STYLED_ITEM('color',(#15693),#10613);+#16153=STYLED_ITEM('color',(#15680),#10635);+#16154=STYLED_ITEM('color',(#15693),#10648);+#16155=STYLED_ITEM('color',(#15680),#10670);+#16156=STYLED_ITEM('color',(#15693),#10683);+#16157=STYLED_ITEM('color',(#15680),#10705);+#16158=STYLED_ITEM('color',(#15693),#10713);+#16159=STYLED_ITEM('color',(#15693),#10723);+#16160=STYLED_ITEM('color',(#15693),#10732);+#16161=STYLED_ITEM('color',(#15693),#10742);+#16162=STYLED_ITEM('color',(#15693),#10752);+#16163=STYLED_ITEM('color',(#15693),#10762);+#16164=STYLED_ITEM('color',(#15693),#10772);+#16165=STYLED_ITEM('color',(#15693),#10782);+#16166=STYLED_ITEM('color',(#15693),#10789);+#16167=STYLED_ITEM('color',(#15693),#10799);+#16168=STYLED_ITEM('color',(#15693),#10808);+#16169=STYLED_ITEM('color',(#15693),#10818);+#16170=STYLED_ITEM('color',(#15693),#10828);+#16171=STYLED_ITEM('color',(#15693),#10838);+#16172=STYLED_ITEM('color',(#15693),#10848);+#16173=STYLED_ITEM('color',(#15693),#10858);+#16174=STYLED_ITEM('color',(#15693),#10865);+#16175=STYLED_ITEM('color',(#15693),#10875);+#16176=STYLED_ITEM('color',(#15693),#10884);+#16177=STYLED_ITEM('color',(#15693),#10894);+#16178=STYLED_ITEM('color',(#15693),#10904);+#16179=STYLED_ITEM('color',(#15693),#10914);+#16180=STYLED_ITEM('color',(#15693),#10924);+#16181=STYLED_ITEM('color',(#15693),#10934);+#16182=STYLED_ITEM('color',(#15693),#10941);+#16183=STYLED_ITEM('color',(#15693),#10951);+#16184=STYLED_ITEM('color',(#15693),#10960);+#16185=STYLED_ITEM('color',(#15693),#10970);+#16186=STYLED_ITEM('color',(#15693),#10980);+#16187=STYLED_ITEM('color',(#15693),#10990);+#16188=STYLED_ITEM('color',(#15693),#11000);+#16189=STYLED_ITEM('color',(#15693),#11010);+#16190=STYLED_ITEM('color',(#15693),#11017);+#16191=STYLED_ITEM('color',(#15693),#11027);+#16192=STYLED_ITEM('color',(#15693),#11036);+#16193=STYLED_ITEM('color',(#15693),#11046);+#16194=STYLED_ITEM('color',(#15693),#11056);+#16195=STYLED_ITEM('color',(#15693),#11066);+#16196=STYLED_ITEM('color',(#15693),#11076);+#16197=STYLED_ITEM('color',(#15693),#11086);+#16198=STYLED_ITEM('color',(#15693),#11093);+#16199=STYLED_ITEM('color',(#15693),#11103);+#16200=STYLED_ITEM('color',(#15693),#11112);+#16201=STYLED_ITEM('color',(#15693),#11122);+#16202=STYLED_ITEM('color',(#15693),#11132);+#16203=STYLED_ITEM('color',(#15693),#11142);+#16204=STYLED_ITEM('color',(#15693),#11152);+#16205=STYLED_ITEM('color',(#15693),#11162);+#16206=STYLED_ITEM('color',(#15693),#11169);+#16207=STYLED_ITEM('color',(#15693),#11179);+#16208=STYLED_ITEM('color',(#15693),#11188);+#16209=STYLED_ITEM('color',(#15693),#11198);+#16210=STYLED_ITEM('color',(#15693),#11208);+#16211=STYLED_ITEM('color',(#15693),#11218);+#16212=STYLED_ITEM('color',(#15693),#11228);+#16213=STYLED_ITEM('color',(#15693),#11238);+#16214=STYLED_ITEM('color',(#15693),#11245);+#16215=STYLED_ITEM('color',(#15693),#11255);+#16216=STYLED_ITEM('color',(#15693),#11264);+#16217=STYLED_ITEM('color',(#15693),#11274);+#16218=STYLED_ITEM('color',(#15693),#11284);+#16219=STYLED_ITEM('color',(#15693),#11294);+#16220=STYLED_ITEM('color',(#15693),#11304);+#16221=STYLED_ITEM('color',(#15693),#11314);+#16222=STYLED_ITEM('color',(#15693),#11321);+#16223=STYLED_ITEM('color',(#15693),#11331);+#16224=STYLED_ITEM('color',(#15693),#11340);+#16225=STYLED_ITEM('color',(#15693),#11350);+#16226=STYLED_ITEM('color',(#15693),#11360);+#16227=STYLED_ITEM('color',(#15693),#11370);+#16228=STYLED_ITEM('color',(#15693),#11380);+#16229=STYLED_ITEM('color',(#15693),#11390);+#16230=STYLED_ITEM('color',(#15693),#11397);+#16231=STYLED_ITEM('color',(#15693),#11407);+#16232=STYLED_ITEM('color',(#15693),#11416);+#16233=STYLED_ITEM('color',(#15693),#11426);+#16234=STYLED_ITEM('color',(#15693),#11436);+#16235=STYLED_ITEM('color',(#15693),#11446);+#16236=STYLED_ITEM('color',(#15693),#11456);+#16237=STYLED_ITEM('color',(#15693),#11466);+#16238=STYLED_ITEM('color',(#15693),#11473);+#16239=STYLED_ITEM('color',(#15693),#11483);+#16240=STYLED_ITEM('color',(#15693),#11492);+#16241=STYLED_ITEM('color',(#15693),#11502);+#16242=STYLED_ITEM('color',(#15693),#11512);+#16243=STYLED_ITEM('color',(#15693),#11522);+#16244=STYLED_ITEM('color',(#15693),#11532);+#16245=STYLED_ITEM('color',(#15693),#11542);+#16246=STYLED_ITEM('color',(#15693),#11549);+#16247=STYLED_ITEM('color',(#15693),#11559);+#16248=STYLED_ITEM('color',(#15693),#11568);+#16249=STYLED_ITEM('color',(#15693),#11578);+#16250=STYLED_ITEM('color',(#15693),#11588);+#16251=STYLED_ITEM('color',(#15693),#11598);+#16252=STYLED_ITEM('color',(#15693),#11608);+#16253=STYLED_ITEM('color',(#15693),#11618);+#16254=STYLED_ITEM('color',(#15693),#11625);+#16255=STYLED_ITEM('color',(#15693),#11699);+#16256=STYLED_ITEM('color',(#15693),#11766);+#16257=STYLED_ITEM('color',(#15680),#11776);+#16258=STYLED_ITEM('color',(#15693),#11880);+#16259=STYLED_ITEM('color',(#15693),#11889);+#16260=STYLED_ITEM('color',(#15693),#11898);+#16261=STYLED_ITEM('color',(#15693),#11907);+#16262=STYLED_ITEM('color',(#15693),#11916);+#16263=STYLED_ITEM('color',(#15693),#11925);+#16264=STYLED_ITEM('color',(#15693),#11934);+#16265=STYLED_ITEM('color',(#15693),#11943);+#16266=STYLED_ITEM('color',(#15693),#11952);+#16267=STYLED_ITEM('color',(#15693),#11961);+#16268=STYLED_ITEM('color',(#15693),#11970);+#16269=STYLED_ITEM('color',(#15693),#11979);+#16270=STYLED_ITEM('color',(#15693),#11988);+#16271=STYLED_ITEM('color',(#15693),#12049);+#16272=STYLED_ITEM('color',(#15693),#12115);+#16273=STYLED_ITEM('color',(#15693),#12125);+#16274=STYLED_ITEM('color',(#15693),#12135);+#16275=STYLED_ITEM('color',(#15693),#12144);+#16276=STYLED_ITEM('color',(#15693),#12154);+#16277=STYLED_ITEM('color',(#15693),#12164);+#16278=STYLED_ITEM('color',(#15693),#12174);+#16279=STYLED_ITEM('color',(#15693),#12184);+#16280=STYLED_ITEM('color',(#15693),#12192);+#16281=STYLED_ITEM('color',(#15693),#12202);+#16282=STYLED_ITEM('color',(#15693),#12211);+#16283=STYLED_ITEM('color',(#15693),#12221);+#16284=STYLED_ITEM('color',(#15693),#12231);+#16285=STYLED_ITEM('color',(#15693),#12241);+#16286=STYLED_ITEM('color',(#15693),#12251);+#16287=STYLED_ITEM('color',(#15693),#12259);+#16288=STYLED_ITEM('color',(#15693),#12269);+#16289=STYLED_ITEM('color',(#15693),#12278);+#16290=STYLED_ITEM('color',(#15693),#12288);+#16291=STYLED_ITEM('color',(#15693),#12298);+#16292=STYLED_ITEM('color',(#15693),#12308);+#16293=STYLED_ITEM('color',(#15693),#12318);+#16294=STYLED_ITEM('color',(#15693),#12326);+#16295=STYLED_ITEM('color',(#15693),#12336);+#16296=STYLED_ITEM('color',(#15693),#12345);+#16297=STYLED_ITEM('color',(#15693),#12355);+#16298=STYLED_ITEM('color',(#15693),#12365);+#16299=STYLED_ITEM('color',(#15693),#12375);+#16300=STYLED_ITEM('color',(#15693),#12385);+#16301=STYLED_ITEM('color',(#15693),#12393);+#16302=STYLED_ITEM('color',(#15693),#12403);+#16303=STYLED_ITEM('color',(#15693),#12412);+#16304=STYLED_ITEM('color',(#15693),#12422);+#16305=STYLED_ITEM('color',(#15693),#12432);+#16306=STYLED_ITEM('color',(#15693),#12442);+#16307=STYLED_ITEM('color',(#15693),#12452);+#16308=STYLED_ITEM('color',(#15693),#12460);+#16309=STYLED_ITEM('color',(#15693),#12470);+#16310=STYLED_ITEM('color',(#15693),#12479);+#16311=STYLED_ITEM('color',(#15693),#12489);+#16312=STYLED_ITEM('color',(#15693),#12499);+#16313=STYLED_ITEM('color',(#15693),#12509);+#16314=STYLED_ITEM('color',(#15693),#12519);+#16315=STYLED_ITEM('color',(#15693),#12527);+#16316=STYLED_ITEM('color',(#15693),#12537);+#16317=STYLED_ITEM('color',(#15693),#12546);+#16318=STYLED_ITEM('color',(#15693),#12556);+#16319=STYLED_ITEM('color',(#15693),#12566);+#16320=STYLED_ITEM('color',(#15693),#12576);+#16321=STYLED_ITEM('color',(#15693),#12586);+#16322=STYLED_ITEM('color',(#15693),#12594);+#16323=STYLED_ITEM('color',(#15693),#12604);+#16324=STYLED_ITEM('color',(#15693),#12613);+#16325=STYLED_ITEM('color',(#15693),#12623);+#16326=STYLED_ITEM('color',(#15693),#12633);+#16327=STYLED_ITEM('color',(#15693),#12643);+#16328=STYLED_ITEM('color',(#15693),#12653);+#16329=STYLED_ITEM('color',(#15693),#12661);+#16330=STYLED_ITEM('color',(#15693),#12671);+#16331=STYLED_ITEM('color',(#15693),#12680);+#16332=STYLED_ITEM('color',(#15693),#12690);+#16333=STYLED_ITEM('color',(#15693),#12700);+#16334=STYLED_ITEM('color',(#15693),#12710);+#16335=STYLED_ITEM('color',(#15693),#12720);+#16336=STYLED_ITEM('color',(#15693),#12728);+#16337=STYLED_ITEM('color',(#15693),#12738);+#16338=STYLED_ITEM('color',(#15693),#12747);+#16339=STYLED_ITEM('color',(#15693),#12757);+#16340=STYLED_ITEM('color',(#15693),#12767);+#16341=STYLED_ITEM('color',(#15693),#12777);+#16342=STYLED_ITEM('color',(#15693),#12787);+#16343=STYLED_ITEM('color',(#15693),#12795);+#16344=STYLED_ITEM('color',(#15693),#12805);+#16345=STYLED_ITEM('color',(#15693),#12814);+#16346=STYLED_ITEM('color',(#15693),#12824);+#16347=STYLED_ITEM('color',(#15693),#12834);+#16348=STYLED_ITEM('color',(#15693),#12844);+#16349=STYLED_ITEM('color',(#15693),#12854);+#16350=STYLED_ITEM('color',(#15693),#12862);+#16351=STYLED_ITEM('color',(#15693),#12872);+#16352=STYLED_ITEM('color',(#15693),#12881);+#16353=STYLED_ITEM('color',(#15693),#12891);+#16354=STYLED_ITEM('color',(#15693),#12901);+#16355=STYLED_ITEM('color',(#15693),#12911);+#16356=STYLED_ITEM('color',(#15693),#12921);+#16357=STYLED_ITEM('color',(#15680),#12929);+#16358=STYLED_ITEM('color',(#15693),#12938);+#16359=STYLED_ITEM('color',(#15693),#13001);+#16360=STYLED_ITEM('color',(#15693),#13066);+#16361=STYLED_ITEM('color',(#15680),#13076);+#16362=STYLED_ITEM('color',(#15693),#13085);+#16363=STYLED_ITEM('color',(#15693),#13148);+#16364=STYLED_ITEM('color',(#15693),#13213);+#16365=STYLED_ITEM('color',(#15680),#13223);+#16366=STYLED_ITEM('color',(#15693),#13232);+#16367=STYLED_ITEM('color',(#15693),#13295);+#16368=STYLED_ITEM('color',(#15693),#13360);+#16369=STYLED_ITEM('color',(#15680),#13370);+#16370=STYLED_ITEM('color',(#15693),#13379);+#16371=STYLED_ITEM('color',(#15693),#13442);+#16372=STYLED_ITEM('color',(#15693),#13507);+#16373=STYLED_ITEM('color',(#15680),#13517);+#16374=STYLED_ITEM('color',(#15693),#13526);+#16375=STYLED_ITEM('color',(#15693),#13589);+#16376=STYLED_ITEM('color',(#15693),#13654);+#16377=STYLED_ITEM('color',(#15680),#13664);+#16378=STYLED_ITEM('color',(#15693),#13673);+#16379=STYLED_ITEM('color',(#15693),#13736);+#16380=STYLED_ITEM('color',(#15693),#13801);+#16381=STYLED_ITEM('color',(#15680),#13811);+#16382=STYLED_ITEM('color',(#15693),#13820);+#16383=STYLED_ITEM('color',(#15693),#13883);+#16384=STYLED_ITEM('color',(#15693),#13948);+#16385=STYLED_ITEM('color',(#15680),#13958);+#16386=STYLED_ITEM('color',(#15693),#13967);+#16387=STYLED_ITEM('color',(#15693),#14030);+#16388=STYLED_ITEM('color',(#15693),#14095);+#16389=STYLED_ITEM('color',(#15680),#14105);+#16390=STYLED_ITEM('color',(#15693),#14114);+#16391=STYLED_ITEM('color',(#15693),#14177);+#16392=STYLED_ITEM('color',(#15693),#14242);+#16393=STYLED_ITEM('color',(#15680),#14252);+#16394=STYLED_ITEM('color',(#15693),#14261);+#16395=STYLED_ITEM('color',(#15693),#14324);+#16396=STYLED_ITEM('color',(#15693),#14389);+#16397=STYLED_ITEM('color',(#15680),#14399);+#16398=STYLED_ITEM('color',(#15693),#14408);+#16399=STYLED_ITEM('color',(#15693),#14471);+#16400=STYLED_ITEM('color',(#15693),#14536);+#16401=STYLED_ITEM('color',(#15680),#14546);+#16402=STYLED_ITEM('color',(#15693),#14552);+#16403=STYLED_ITEM('color',(#15693),#14563);+#16404=STYLED_ITEM('color',(#15693),#14572);+#16405=STYLED_ITEM('color',(#15693),#14582);+#16406=STYLED_ITEM('color',(#15693),#14592);+#16407=STYLED_ITEM('color',(#15693),#14602);+#16408=STYLED_ITEM('color',(#15693),#14612);+#16409=STYLED_ITEM('color',(#15693),#14623);+#16410=STYLED_ITEM('color',(#15693),#14632);+#16411=STYLED_ITEM('color',(#15693),#14640);+#16412=STYLED_ITEM('color',(#15693),#14650);+#16413=STYLED_ITEM('color',(#15693),#14660);+#16414=STYLED_ITEM('color',(#15693),#14670);+#16415=STYLED_ITEM('color',(#15693),#14680);+#16416=STYLED_ITEM('color',(#15693),#14690);+#16417=STYLED_ITEM('color',(#15693),#14700);+#16418=STYLED_ITEM('color',(#15693),#14710);+#16419=STYLED_ITEM('color',(#15693),#14720);+#16420=STYLED_ITEM('color',(#15693),#14730);+#16421=STYLED_ITEM('color',(#15693),#14740);+#16422=STYLED_ITEM('color',(#15693),#14750);+#16423=STYLED_ITEM('color',(#15693),#14760);+#16424=STYLED_ITEM('color',(#15693),#14770);+#16425=STYLED_ITEM('color',(#15693),#14779);+#16426=STYLED_ITEM('color',(#15693),#14789);+#16427=STYLED_ITEM('color',(#15693),#14799);+#16428=STYLED_ITEM('color',(#15693),#14809);+#16429=STYLED_ITEM('color',(#15693),#14819);+#16430=STYLED_ITEM('color',(#15693),#14829);+#16431=STYLED_ITEM('color',(#15693),#14836);+#16432=STYLED_ITEM('color',(#15693),#14846);+#16433=STYLED_ITEM('color',(#15693),#14855);+#16434=STYLED_ITEM('color',(#15693),#14865);+#16435=STYLED_ITEM('color',(#15693),#14875);+#16436=STYLED_ITEM('color',(#15693),#14885);+#16437=STYLED_ITEM('color',(#15693),#14895);+#16438=STYLED_ITEM('color',(#15693),#14905);+#16439=STYLED_ITEM('color',(#15693),#14912);+#16440=STYLED_ITEM('color',(#15693),#14922);+#16441=STYLED_ITEM('color',(#15693),#14931);+#16442=STYLED_ITEM('color',(#15693),#14941);+#16443=STYLED_ITEM('color',(#15693),#14951);+#16444=STYLED_ITEM('color',(#15693),#14961);+#16445=STYLED_ITEM('color',(#15693),#14971);+#16446=STYLED_ITEM('color',(#15693),#14981);+#16447=STYLED_ITEM('color',(#15693),#14988);+#16448=STYLED_ITEM('color',(#15693),#14998);+#16449=STYLED_ITEM('color',(#15693),#15007);+#16450=STYLED_ITEM('color',(#15693),#15017);+#16451=STYLED_ITEM('color',(#15693),#15027);+#16452=STYLED_ITEM('color',(#15693),#15037);+#16453=STYLED_ITEM('color',(#15693),#15047);+#16454=STYLED_ITEM('color',(#15693),#15057);+#16455=STYLED_ITEM('color',(#15693),#15064);+#16456=STYLED_ITEM('color',(#15693),#15074);+#16457=STYLED_ITEM('color',(#15693),#15083);+#16458=STYLED_ITEM('color',(#15693),#15093);+#16459=STYLED_ITEM('color',(#15693),#15103);+#16460=STYLED_ITEM('color',(#15693),#15113);+#16461=STYLED_ITEM('color',(#15693),#15123);+#16462=STYLED_ITEM('color',(#15693),#15133);+#16463=STYLED_ITEM('color',(#15693),#15140);+#16464=STYLED_ITEM('color',(#15693),#15150);+#16465=STYLED_ITEM('color',(#15693),#15159);+#16466=STYLED_ITEM('color',(#15693),#15169);+#16467=STYLED_ITEM('color',(#15693),#15179);+#16468=STYLED_ITEM('color',(#15693),#15189);+#16469=STYLED_ITEM('color',(#15693),#15199);+#16470=STYLED_ITEM('color',(#15693),#15209);+#16471=STYLED_ITEM('color',(#15693),#15216);+#16472=STYLED_ITEM('color',(#15693),#15226);+#16473=STYLED_ITEM('color',(#15693),#15235);+#16474=STYLED_ITEM('color',(#15693),#15245);+#16475=STYLED_ITEM('color',(#15693),#15255);+#16476=STYLED_ITEM('color',(#15693),#15265);+#16477=STYLED_ITEM('color',(#15693),#15275);+#16478=STYLED_ITEM('color',(#15693),#15285);+#16479=STYLED_ITEM('color',(#15693),#15292);+#16480=STYLED_ITEM('color',(#15693),#15302);+#16481=STYLED_ITEM('color',(#15693),#15311);+#16482=STYLED_ITEM('color',(#15693),#15321);+#16483=STYLED_ITEM('color',(#15693),#15331);+#16484=STYLED_ITEM('color',(#15693),#15341);+#16485=STYLED_ITEM('color',(#15693),#15351);+#16486=STYLED_ITEM('color',(#15693),#15361);+#16487=STYLED_ITEM('color',(#15693),#15368);+#16488=STYLED_ITEM('color',(#15693),#15378);+#16489=STYLED_ITEM('color',(#15693),#15387);+#16490=STYLED_ITEM('color',(#15693),#15397);+#16491=STYLED_ITEM('color',(#15693),#15407);+#16492=STYLED_ITEM('color',(#15693),#15417);+#16493=STYLED_ITEM('color',(#15693),#15427);+#16494=STYLED_ITEM('color',(#15693),#15437);+#16495=STYLED_ITEM('color',(#15693),#15444);+#16496=STYLED_ITEM('color',(#15693),#15454);+#16497=STYLED_ITEM('color',(#15693),#15463);+#16498=STYLED_ITEM('color',(#15693),#15473);+#16499=STYLED_ITEM('color',(#15693),#15483);+#16500=STYLED_ITEM('color',(#15693),#15493);+#16501=STYLED_ITEM('color',(#15693),#15503);+#16502=STYLED_ITEM('color',(#15693),#15513);+#16503=STYLED_ITEM('color',(#15693),#15520);+#16504=STYLED_ITEM('color',(#15693),#15530);+#16505=STYLED_ITEM('color',(#15693),#15539);+#16506=STYLED_ITEM('color',(#15693),#15549);+#16507=STYLED_ITEM('color',(#15693),#15559);+#16508=STYLED_ITEM('color',(#15693),#15569);+#16509=STYLED_ITEM('color',(#15693),#15579);+#16510=STYLED_ITEM('color',(#15693),#15589);+#16511=STYLED_ITEM('color',(#15693),#15596);+#16512=STYLED_ITEM('color',(#15693),#15606);+#16513=STYLED_ITEM('color',(#15693),#15615);+#16514=STYLED_ITEM('color',(#15693),#15625);+#16515=STYLED_ITEM('color',(#15693),#15635);+#16516=STYLED_ITEM('color',(#15693),#15645);+#16517=STYLED_ITEM('color',(#15693),#15655);+#16518=STYLED_ITEM('color',(#15693),#15665);+ENDSEC;+END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>tm1622</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>tm1622</title>