← Commit history

Initial commit: component/tm1622-lqfp64

Ray ·83888fd7b7 ·
2 files changed +576
README.mdadded+100
@@ -0,0 +1,100 @@+# TM1622-LQFP64++**TM Shenzhen Titan Micro Elec** · LCD Drivers · LQFP-64(7x7)++TM1622-LQFP64 from TM Shenzhen Titan Micro Elec, in a LQFP-64(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS | input | Chip select signal. When CS is high, all read/write operations are invalid and the serial interface is reset; when low, normal read/write of data and commands is enabled. |+| 2 | NC | unconnected | No internal connection; pin is not used. |+| 3 | RD | input | Read mode clock input. At RD falling edge, display memory data is output to DATA line; data is latched at next RD rising edge. |+| 4 | WR | input | Write mode clock input. At WR rising edge, data on DATA line is written into display memory. |+| 5 | DATA | bidirectional | Serial data input/output pin for reading or writing display memory data and commands. |+| 6 | GND | power_in | Ground; system reference voltage (0 V). |+| 7 | OSCI | input | External 32 kHz frequency source input. Leave floating if internal RC oscillator is used. |+| 8 | VDD | power_in | Positive power supply input voltage (operating range 2.4 to 5.2 V). |+| 9 | VLCD | input | LCD bias voltage input for adjusting LCD operating voltage; must not exceed VDD. |+| 10 | IRQ | output | Time base or watchdog timer overflow flag output with NMOS open-drain topology; requires external 10 kΩ pull-up resistor. |+| 11 | BZ | output | Buzzer driver output (positive phase). Outputs 2 kHz or 4 kHz square wave signal for piezo buzzer drive. |+| 12 | NC | unconnected | No internal connection; pin is not used. |+| 13 | BZ̄ | output | Buzzer driver output (negative/inverse phase). Provides differential pair with pin 11 for piezo buzzer drive. |+| 14 | T1 | input | Auxiliary bias voltage input pin; not recommended for use in normal operation. |+| 15 | T2 | input | Auxiliary bias voltage input pin; not recommended for use in normal operation. |+| 16 | T3 | input | Auxiliary bias voltage input pin; not recommended for use in normal operation. |+| 17 | COM0 | output | LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM0 line). |+| 18 | COM1 | output | LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM1 line). |+| 19 | NC | unconnected | No internal connection; pin is not used. |+| 20 | COM2 | output | LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM2 line). |+| 21 | COM3 | output | LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM3 line). |+| 22 | COM4 | output | LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM4 line). |+| 23 | COM5 | output | LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM5 line). |+| 24 | COM6 | output | LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM6 line). |+| 25 | COM7 | output | LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM7 line). |+| 26 | SEG0 | output | LCD segment (SEG) terminal drive output (SEG0 line); 1/4 bias drive with 32 total segment outputs. |+| 27 | SEG1 | output | LCD segment (SEG) terminal drive output (SEG1 line); 1/4 bias drive with 32 total segment outputs. |+| 28 | SEG2 | output | LCD segment (SEG) terminal drive output (SEG2 line); 1/4 bias drive with 32 total segment outputs. |+| 29 | SEG3 | output | LCD segment (SEG) terminal drive output (SEG3 line); 1/4 bias drive with 32 total segment outputs. |+| 30 | SEG4 | output | LCD segment (SEG) terminal drive output (SEG4 line); 1/4 bias drive with 32 total segment outputs. |+| 31 | SEG5 | output | LCD segment (SEG) terminal drive output (SEG5 line); 1/4 bias drive with 32 total segment outputs. |+| 32 | SEG6 | output | LCD segment (SEG) terminal drive output (SEG6 line); 1/4 bias drive with 32 total segment outputs. |+| 33 | NC | unconnected | No internal connection; pin is not used. |+| 34 | NC | unconnected | No internal connection; pin is not used. |+| 35 | NC | unconnected | No internal connection; pin is not used. |+| 36 | SEG7 | output | LCD segment (SEG) terminal drive output (SEG7 line); 1/4 bias drive with 32 total segment outputs. |+| 37 | SEG8 | output | LCD segment (SEG) terminal drive output (SEG8 line); 1/4 bias drive with 32 total segment outputs. |+| 38 | SEG9 | output | LCD segment (SEG) terminal drive output (SEG9 line); 1/4 bias drive with 32 total segment outputs. |+| 39 | SEG10 | output | LCD segment (SEG) terminal drive output (SEG10 line); 1/4 bias drive with 32 total segment outputs. |+| 40 | SEG11 | output | LCD segment (SEG) terminal drive output (SEG11 line); 1/4 bias drive with 32 total segment outputs. |+| 41 | SEG12 | output | LCD segment (SEG) terminal drive output (SEG12 line); 1/4 bias drive with 32 total segment outputs. |+| 42 | SEG13 | output | LCD segment (SEG) terminal drive output (SEG13 line); 1/4 bias drive with 32 total segment outputs. |+| 43 | SEG14 | output | LCD segment (SEG) terminal drive output (SEG14 line); 1/4 bias drive with 32 total segment outputs. |+| 44 | SEG15 | output | LCD segment (SEG) terminal drive output (SEG15 line); 1/4 bias drive with 32 total segment outputs. |+| 45 | SEG16 | output | LCD segment (SEG) terminal drive output (SEG16 line); 1/4 bias drive with 32 total segment outputs. |+| 46 | SEG17 | output | LCD segment (SEG) terminal drive output (SEG17 line); 1/4 bias drive with 32 total segment outputs. |+| 47 | SEG18 | output | LCD segment (SEG) terminal drive output (SEG18 line); 1/4 bias drive with 32 total segment outputs. |+| 48 | SEG19 | output | LCD segment (SEG) terminal drive output (SEG19 line); 1/4 bias drive with 32 total segment outputs. |+| 49 | NC | unconnected | No internal connection; pin is not used. |+| 50 | NC | unconnected | No internal connection; pin is not used. |+| 51 | NC | unconnected | No internal connection; pin is not used. |+| 52 | NC | unconnected | No internal connection; pin is not used. |+| 53 | SEG20 | output | LCD segment (SEG) terminal drive output (SEG20 line); 1/4 bias drive with 32 total segment outputs. |+| 54 | SEG21 | output | LCD segment (SEG) terminal drive output (SEG21 line); 1/4 bias drive with 32 total segment outputs. |+| 55 | SEG22 | output | LCD segment (SEG) terminal drive output (SEG22 line); 1/4 bias drive with 32 total segment outputs. |+| 56 | SEG23 | output | LCD segment (SEG) terminal drive output (SEG23 line); 1/4 bias drive with 32 total segment outputs. |+| 57 | SEG24 | output | LCD segment (SEG) terminal drive output (SEG24 line); 1/4 bias drive with 32 total segment outputs. |+| 58 | SEG25 | output | LCD segment (SEG) terminal drive output (SEG25 line); 1/4 bias drive with 32 total segment outputs. |+| 59 | SEG26 | output | LCD segment (SEG) terminal drive output (SEG26 line); 1/4 bias drive with 32 total segment outputs. |+| 60 | SEG27 | output | LCD segment (SEG) terminal drive output (SEG27 line); 1/4 bias drive with 32 total segment outputs. |+| 61 | SEG28 | output | LCD segment (SEG) terminal drive output (SEG28 line); 1/4 bias drive with 32 total segment outputs. |+| 62 | SEG29 | output | LCD segment (SEG) terminal drive output (SEG29 line); 1/4 bias drive with 32 total segment outputs. |+| 63 | SEG30 | output | LCD segment (SEG) terminal drive output (SEG30 line); 1/4 bias drive with 32 total segment outputs. |+| 64 | SEG31 | output | LCD segment (SEG) terminal drive output (SEG31 line); 1/4 bias drive with 32 total segment outputs. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TM Shenzhen Titan Micro Elec |+| Package | LQFP-64(7x7) |+| Category | LED Drivers |+| Pins | 64 |++## CAD (KiCad official)++- Symbol: `TM1622-LQFP64`+- Footprint: `Package_QFP:LQFP-64_7x7mm_P0.4mm`+- 3D model: LQFP-64(7x7) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TM Shenzhen Titan Micro Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893437659107328) (16 pp, sha256 `ca2886432e3881dd`, retrieved 2026-09-17, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tm1622-lqfp64-datasheet.pdf)
page.jsonadded+476
@@ -0,0 +1,476 @@+{+  "slug": "tm1622-lqfp64",+  "version": "0.1.0",+  "type": "component",+  "description": "TM Shenzhen Titan Micro Elec LCD Drivers, LQFP-64(7x7). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tm1622-lqfp64",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tm1622-lqfp64.kicad_sym",+    "tm1622-lqfp64.kicad_mod",+    "tm1622-lqfp64.glb",+    "tm1622-lqfp64.step",+    "tm1622-lqfp64.lbr",+    "docs/hero.png",+    "docs/tm1622-lqfp64-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TM1622-LQFP64",+    "manufacturer": "TM Shenzhen Titan Micro Elec",+    "package": "LQFP-64(7x7)",+    "pin_count": 64,+    "category": "LED Drivers",+    "subcategory": "LCD Drivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893437659107328",+    "parts": {+      "symbol": "tm1622-lqfp64.kicad_sym",+      "footprint": "tm1622-lqfp64.kicad_mod",+      "model_3d": "tm1622-lqfp64.glb",+      "model_3d_step": "tm1622-lqfp64.step",+      "lbr": "tm1622-lqfp64.lbr"+    },+    "distributor_links": {+      "lcsc": "C472518"+    },+    "pins": [+      {+        "number": "1",+        "name": "CS",+        "type": "input",+        "description": "Chip select signal. When CS is high, all read/write operations are invalid and the serial interface is reset; when low, normal read/write of data and commands is enabled."+      },+      {+        "number": "2",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "3",+        "name": "RD",+        "type": "input",+        "description": "Read mode clock input. At RD falling edge, display memory data is output to DATA line; data is latched at next RD rising edge."+      },+      {+        "number": "4",+        "name": "WR",+        "type": "input",+        "description": "Write mode clock input. At WR rising edge, data on DATA line is written into display memory."+      },+      {+        "number": "5",+        "name": "DATA",+        "type": "bidirectional",+        "description": "Serial data input/output pin for reading or writing display memory data and commands."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground; system reference voltage (0 V)."+      },+      {+        "number": "7",+        "name": "OSCI",+        "type": "input",+        "description": "External 32 kHz frequency source input. Leave floating if internal RC oscillator is used."+      },+      {+        "number": "8",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive power supply input voltage (operating range 2.4 to 5.2 V)."+      },+      {+        "number": "9",+        "name": "VLCD",+        "type": "input",+        "description": "LCD bias voltage input for adjusting LCD operating voltage; must not exceed VDD."+      },+      {+        "number": "10",+        "name": "IRQ",+        "type": "output",+        "description": "Time base or watchdog timer overflow flag output with NMOS open-drain topology; requires external 10 kΩ pull-up resistor."+      },+      {+        "number": "11",+        "name": "BZ",+        "type": "output",+        "description": "Buzzer driver output (positive phase). Outputs 2 kHz or 4 kHz square wave signal for piezo buzzer drive."+      },+      {+        "number": "12",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "13",+        "name": "BZ̄",+        "type": "output",+        "description": "Buzzer driver output (negative/inverse phase). Provides differential pair with pin 11 for piezo buzzer drive."+      },+      {+        "number": "14",+        "name": "T1",+        "type": "input",+        "description": "Auxiliary bias voltage input pin; not recommended for use in normal operation."+      },+      {+        "number": "15",+        "name": "T2",+        "type": "input",+        "description": "Auxiliary bias voltage input pin; not recommended for use in normal operation."+      },+      {+        "number": "16",+        "name": "T3",+        "type": "input",+        "description": "Auxiliary bias voltage input pin; not recommended for use in normal operation."+      },+      {+        "number": "17",+        "name": "COM0",+        "type": "output",+        "description": "LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM0 line)."+      },+      {+        "number": "18",+        "name": "COM1",+        "type": "output",+        "description": "LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM1 line)."+      },+      {+        "number": "19",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "20",+        "name": "COM2",+        "type": "output",+        "description": "LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM2 line)."+      },+      {+        "number": "21",+        "name": "COM3",+        "type": "output",+        "description": "LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM3 line)."+      },+      {+        "number": "22",+        "name": "COM4",+        "type": "output",+        "description": "LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM4 line)."+      },+      {+        "number": "23",+        "name": "COM5",+        "type": "output",+        "description": "LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM5 line)."+      },+      {+        "number": "24",+        "name": "COM6",+        "type": "output",+        "description": "LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM6 line)."+      },+      {+        "number": "25",+        "name": "COM7",+        "type": "output",+        "description": "LCD common (COM) terminal drive output for 1/4 duty cycle, 8-COM LCD display (COM7 line)."+      },+      {+        "number": "26",+        "name": "SEG0",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG0 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "27",+        "name": "SEG1",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG1 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "28",+        "name": "SEG2",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG2 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "29",+        "name": "SEG3",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG3 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "30",+        "name": "SEG4",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG4 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "31",+        "name": "SEG5",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG5 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "32",+        "name": "SEG6",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG6 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "33",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "34",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "35",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "36",+        "name": "SEG7",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG7 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "37",+        "name": "SEG8",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG8 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "38",+        "name": "SEG9",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG9 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "39",+        "name": "SEG10",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG10 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "40",+        "name": "SEG11",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG11 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "41",+        "name": "SEG12",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG12 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "42",+        "name": "SEG13",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG13 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "43",+        "name": "SEG14",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG14 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "44",+        "name": "SEG15",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG15 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "45",+        "name": "SEG16",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG16 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "46",+        "name": "SEG17",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG17 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "47",+        "name": "SEG18",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG18 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "48",+        "name": "SEG19",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG19 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "49",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "50",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "51",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "52",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; pin is not used."+      },+      {+        "number": "53",+        "name": "SEG20",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG20 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "54",+        "name": "SEG21",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG21 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "55",+        "name": "SEG22",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG22 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "56",+        "name": "SEG23",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG23 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "57",+        "name": "SEG24",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG24 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "58",+        "name": "SEG25",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG25 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "59",+        "name": "SEG26",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG26 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "60",+        "name": "SEG27",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG27 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "61",+        "name": "SEG28",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG28 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "62",+        "name": "SEG29",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG29 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "63",+        "name": "SEG30",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG30 line); 1/4 bias drive with 32 total segment outputs."+      },+      {+        "number": "64",+        "name": "SEG31",+        "type": "output",+        "description": "LCD segment (SEG) terminal drive output (SEG31 line); 1/4 bias drive with 32 total segment outputs."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: SEG0–SEG31 pin sequence (pins 26–64) inferred from table row ranges and NC positions. The datasheet ; Pin 13 label 'BZ̄' (overline notation for inversion) rendered here as BZ̄ for inverse-phase buzzer o"+        ],+        "pages_sent": 16,+        "cost_usd": 0.776,+        "at": "2026-09-17T17:38:30"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588893437659107328",+        "pages": 16,+        "sha256": "ca2886432e3881dd",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 64,+        "described": 64,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file