component
TM1621
Public Made by Adomby adom
TM Shenzhen Titan Micro Elec LCD Drivers, LQFP-44(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
tm1621: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+125−45
package.json+83−43@@ -65,7 +65,7 @@ "number": "3", "name": "DATA", "type": "bidirectional",- "description": "Bidirectional serial data input/output with external pull-up to VDD (recommended 10 k\u03a9 \u00b120%); carries addresses, write data, and command bytes; output propagation delay tDD \u2264 2 \u00b5s at 3 V."+ "description": "Bidirectional serial data input/output with external pull-up to VDD (recommended 10 kΩ ±20%); carries addresses, write data, and command bytes; output propagation delay tDD ≤ 2 µs at 3 V." }, { "number": "4",@@ -77,241 +77,241 @@ "number": "5", "name": "VLCD", "type": "power_in",- "description": "LCD bias supply input; voltage must be lower than VDD; adjusted via external resistor divider (e.g. VR = 15 k\u03a9 \u00b120% gives VLCD = 4 V when VDD = 5 V)."+ "description": "LCD bias supply input; voltage must be lower than VDD; adjusted via external resistor divider (e.g. VR = 15 kΩ ±20% gives VLCD = 4 V when VDD = 5 V)." }, { "number": "6", "name": "VDD", "type": "power_in",- "description": "Logic positive supply, 2.4-5.2 V; operating current 150-300 \u00b5A typ at 3 V (internal RC oscillator), 300-600 \u00b5A at 5 V."+ "description": "Logic positive supply, 2.4-5.2 V; operating current 150-300 µA typ at 3 V (internal RC oscillator), 300-600 µA at 5 V." }, { "number": "7", "name": "BZ", "type": "output",- "description": "Buzzer positive audio output; differential drive pair with /BZ for piezoelectric buzzer; selectable 2 kHz or 4 kHz tone via TONE 2K/4K command; held low when tone is disabled; IOH1/IOL1 typ \u00b10.4/0.5 mA at 3 V."+ "description": "Buzzer positive audio output; differential drive pair with /BZ for piezoelectric buzzer; selectable 2 kHz or 4 kHz tone via TONE 2K/4K command; held low when tone is disabled; IOH1/IOL1 typ ±0.4/0.5 mA at 3 V." }, { "number": "8", "name": "/BZ", "type": "output",- "description": "Buzzer complementary audio output; differential pair with BZ; held low when tone is disabled or system oscillator is off; IOH1/IOL1 typ \u00b10.4/0.5 mA at 3 V."+ "description": "Buzzer complementary audio output; differential pair with BZ; held low when tone is disabled or system oscillator is off; IOH1/IOL1 typ ±0.4/0.5 mA at 3 V." }, { "number": "9", "name": "COM0", "type": "output",- "description": "LCD common 0 driver output; outputs multiplex waveform at up to 256 Hz with selectable 1/2 or 1/3 bias; sink current IOL2 typ 80 \u00b5A, source current IOH2 typ 80 \u00b5A at 3 V."+ "description": "LCD common 0 driver output; outputs multiplex waveform at up to 256 Hz with selectable 1/2 or 1/3 bias; sink current IOL2 typ 80 µA, source current IOH2 typ 80 µA at 3 V." }, { "number": "10", "name": "COM1", "type": "output",- "description": "LCD common 1 driver output; outputs multiplex waveform at up to 256 Hz with selectable 1/2 or 1/3 bias; sink current IOL2 typ 80 \u00b5A, source current IOH2 typ 80 \u00b5A at 3 V."+ "description": "LCD common 1 driver output; outputs multiplex waveform at up to 256 Hz with selectable 1/2 or 1/3 bias; sink current IOL2 typ 80 µA, source current IOH2 typ 80 µA at 3 V." }, { "number": "11", "name": "COM2", "type": "output",- "description": "LCD common 2 driver output; outputs multiplex waveform at up to 256 Hz with selectable 1/2 or 1/3 bias; sink current IOL2 typ 80 \u00b5A, source current IOH2 typ 80 \u00b5A at 3 V."+ "description": "LCD common 2 driver output; outputs multiplex waveform at up to 256 Hz with selectable 1/2 or 1/3 bias; sink current IOL2 typ 80 µA, source current IOH2 typ 80 µA at 3 V." }, { "number": "12", "name": "COM3", "type": "output",- "description": "LCD common 3 driver output; active only when 4-COM mode is selected via BIAS&COM command; sink current IOL2 typ 80 \u00b5A, source current IOH2 typ 80 \u00b5A at 3 V."+ "description": "LCD common 3 driver output; active only when 4-COM mode is selected via BIAS&COM command; sink current IOL2 typ 80 µA, source current IOH2 typ 80 µA at 3 V." }, { "number": "13", "name": "SEG31", "type": "output",- "description": "LCD segment 31 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 31 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "14", "name": "SEG30", "type": "output",- "description": "LCD segment 30 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 30 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "15", "name": "SEG29", "type": "output",- "description": "LCD segment 29 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 29 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "16", "name": "SEG28", "type": "output",- "description": "LCD segment 28 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 28 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "17", "name": "SEG27", "type": "output",- "description": "LCD segment 27 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 27 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "18", "name": "SEG26", "type": "output",- "description": "LCD segment 26 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 26 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "19", "name": "SEG25", "type": "output",- "description": "LCD segment 25 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 25 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "20", "name": "SEG24", "type": "output",- "description": "LCD segment 24 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 24 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "21", "name": "SEG23", "type": "output",- "description": "LCD segment 23 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 23 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "22", "name": "SEG22", "type": "output",- "description": "LCD segment 22 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 22 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "23", "name": "SEG21", "type": "output",- "description": "LCD segment 21 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 21 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "24", "name": "SEG20", "type": "output",- "description": "LCD segment 20 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 20 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "25", "name": "SEG19", "type": "output",- "description": "LCD segment 19 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 19 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "26", "name": "SEG18", "type": "output",- "description": "LCD segment 18 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 18 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "27", "name": "SEG17", "type": "output",- "description": "LCD segment 17 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 17 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "28", "name": "SEG16", "type": "output",- "description": "LCD segment 16 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 16 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "29", "name": "SEG15", "type": "output",- "description": "LCD segment 15 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 15 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "30", "name": "SEG14", "type": "output",- "description": "LCD segment 14 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 14 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "31", "name": "SEG13", "type": "output",- "description": "LCD segment 13 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 13 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "32", "name": "SEG12", "type": "output",- "description": "LCD segment 12 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 12 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "33", "name": "SEG11", "type": "output",- "description": "LCD segment 11 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 11 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "34", "name": "SEG10", "type": "output",- "description": "LCD segment 10 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 10 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "35", "name": "SEG9", "type": "output",- "description": "LCD segment 9 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 9 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "36", "name": "SEG8", "type": "output",- "description": "LCD segment 8 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 8 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "37", "name": "SEG7", "type": "output",- "description": "LCD segment 7 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 7 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "38", "name": "SEG6", "type": "output",- "description": "LCD segment 6 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 6 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "39", "name": "SEG5", "type": "output",- "description": "LCD segment 5 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 5 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "40", "name": "SEG4", "type": "output",- "description": "LCD segment 4 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 4 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "41", "name": "SEG3", "type": "output",- "description": "LCD segment 3 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 3 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "42", "name": "SEG2", "type": "output",- "description": "LCD segment 2 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 2 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "43", "name": "SEG1", "type": "output",- "description": "LCD segment 1 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 1 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." }, { "number": "44", "name": "SEG0", "type": "output",- "description": "LCD segment 0 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 \u00b5A, source current IOH3 typ 40 \u00b5A at 3 V."+ "description": "LCD segment 0 driver output; directly mirrors display RAM bit; sink current IOL3 typ 60 µA, source current IOH3 typ 40 µA at 3 V." } ], "provenance": {@@ -348,6 +348,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tm1621.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "81aae6270b5c742bed79a8a35e9adf7fbed97c42e341e6b25ab20c1783b93b5d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tm1621-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f4243fb10b1d0f9f31993ff865fb09ed4f6db4d067a1471dfc6dbf6a400717b0",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -333,7 +333,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tm1621.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "81aae6270b5c742bed79a8a35e9adf7fbed97c42e341e6b25ab20c1783b93b5d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tm1621-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 12.0,+ 12.0,+ 1.5+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f4243fb10b1d0f9f31993ff865fb09ed4f6db4d067a1471dfc6dbf6a400717b0",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -381,4 +421,4 @@ "public": true }, "updated_at": "2026-09-25T10:55:23.972Z"-}+}