← Commit history

Initial commit: component/tm1617

Ray ·787c14adda ·
2 files changed +244
README.mdadded+53
@@ -0,0 +1,53 @@+# TM1617++**TM Shenzhen Titan Micro Elec** · Digital Tube Drivers · SOIC-16++TM1617 from TM Shenzhen Titan Micro Elec, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | DIO | tri_state | Serial data input on clock rising edge from LSB and output on falling edge from LSB; N-channel open-drain output requiring external 1K-10K pull-up resistor. |+| 2 | CLK | input | Serial clock input that reads data on rising edge and outputs data on falling edge. |+| 3 | STB | input | Chip select input that initializes serial interface on rising or falling edge; first byte after STB goes low acts as command; CLK is ignored when STB is high. |+| 4 | K1 | input | Keyboard scan data input; data is latched after display cycle ends. |+| 5 | VDD | power_in | Logic power supply; 5V±10% nominal voltage. |+| 6 | SEG5 | output | Segment output (alternate function KS5 for keyboard scan); P-channel open-drain output. |+| 7 | SEG6 | output | Segment output (alternate function KS6 for keyboard scan); P-channel open-drain output. |+| 8 | SEG7 | output | Segment output (alternate function KS7 for keyboard scan); P-channel open-drain output. |+| 9 | SEG8 | output | Segment output (alternate function KS8 for keyboard scan); P-channel open-drain output. |+| 10 | SEG9 | output | Segment output (alternate function KS9 for keyboard scan); P-channel open-drain output. |+| 11 | SEG10 | output | Segment output (alternate function KS10 for keyboard scan); P-channel open-drain output. |+| 12 | SEG11 | output | Segment output; P-channel open-drain output. |+| 13 | SEG12 | output | Segment/Grid multiplex output; can only be configured as segment or grid output. |+| 14 | GND | power_in | Logic ground; connects to system ground. |+| 15 | GRID2 | output | Grid output for digit selection; N-channel open-drain output. |+| 16 | GRID1 | output | Grid output for digit selection; N-channel open-drain output. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TM Shenzhen Titan Micro Elec |+| Package | SOIC-16 |+| Category | LED Drivers |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TM1617`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16 (KiCad packages3D, STEP)+- 3D model files: `tm1617-etched.step` / `tm1617-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tm1617.step` / `tm1617.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TM Shenzhen Titan Micro Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882507365797888) (16 pp, sha256 `2f2ce6706fc93d7a`, retrieved 2026-09-22, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tm1617-datasheet.pdf)
page.jsonadded+191
@@ -0,0 +1,191 @@+{+  "slug": "tm1617",+  "version": "0.1.0",+  "type": "component",+  "description": "TM Shenzhen Titan Micro Elec Digital Tube Drivers, SOIC-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tm1617",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tm1617.kicad_sym",+    "tm1617.kicad_mod",+    "tm1617.glb",+    "tm1617.step",+    "tm1617.lbr",+    "docs/hero.png",+    "docs/tm1617-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TM1617",+    "manufacturer": "TM Shenzhen Titan Micro Elec",+    "package": "SOIC-16",+    "pin_count": 16,+    "category": "LED Drivers",+    "subcategory": "Digital Tube Drivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882507365797888",+    "parts": {+      "symbol": "tm1617.kicad_sym",+      "footprint": "tm1617.kicad_mod",+      "model_3d": "tm1617-etched.glb",+      "model_3d_plain": "tm1617.glb",+      "model_3d_step": "tm1617-etched.step",+      "model_3d_step_plain": "tm1617.step",+      "lbr": "tm1617.lbr"+    },+    "distributor_links": {+      "lcsc": "C12555"+    },+    "pins": [+      {+        "number": "1",+        "name": "DIO",+        "type": "tri_state",+        "description": "Serial data input on clock rising edge from LSB and output on falling edge from LSB; N-channel open-drain output requiring external 1K-10K pull-up resistor."+      },+      {+        "number": "2",+        "name": "CLK",+        "type": "input",+        "description": "Serial clock input that reads data on rising edge and outputs data on falling edge."+      },+      {+        "number": "3",+        "name": "STB",+        "type": "input",+        "description": "Chip select input that initializes serial interface on rising or falling edge; first byte after STB goes low acts as command; CLK is ignored when STB is high."+      },+      {+        "number": "4",+        "name": "K1",+        "type": "input",+        "description": "Keyboard scan data input; data is latched after display cycle ends."+      },+      {+        "number": "5",+        "name": "VDD",+        "type": "power_in",+        "description": "Logic power supply; 5V±10% nominal voltage."+      },+      {+        "number": "6",+        "name": "SEG5",+        "type": "output",+        "description": "Segment output (alternate function KS5 for keyboard scan); P-channel open-drain output."+      },+      {+        "number": "7",+        "name": "SEG6",+        "type": "output",+        "description": "Segment output (alternate function KS6 for keyboard scan); P-channel open-drain output."+      },+      {+        "number": "8",+        "name": "SEG7",+        "type": "output",+        "description": "Segment output (alternate function KS7 for keyboard scan); P-channel open-drain output."+      },+      {+        "number": "9",+        "name": "SEG8",+        "type": "output",+        "description": "Segment output (alternate function KS8 for keyboard scan); P-channel open-drain output."+      },+      {+        "number": "10",+        "name": "SEG9",+        "type": "output",+        "description": "Segment output (alternate function KS9 for keyboard scan); P-channel open-drain output."+      },+      {+        "number": "11",+        "name": "SEG10",+        "type": "output",+        "description": "Segment output (alternate function KS10 for keyboard scan); P-channel open-drain output."+      },+      {+        "number": "12",+        "name": "SEG11",+        "type": "output",+        "description": "Segment output; P-channel open-drain output."+      },+      {+        "number": "13",+        "name": "SEG12",+        "type": "output",+        "description": "Segment/Grid multiplex output; can only be configured as segment or grid output."+      },+      {+        "number": "14",+        "name": "GND",+        "type": "power_in",+        "description": "Logic ground; connects to system ground."+      },+      {+        "number": "15",+        "name": "GRID2",+        "type": "output",+        "description": "Grid output for digit selection; N-channel open-drain output."+      },+      {+        "number": "16",+        "name": "GRID1",+        "type": "output",+        "description": "Grid output for digit selection; N-channel open-drain output."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 4 is labeled as 'K3' in the pin definition diagram on PAGE 1, but the official pin function tabl"+        ],+        "pages_sent": 16,+        "cost_usd": 0.3259,+        "at": "2026-09-22T01:16:06"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882507365797888",+        "pages": 16,+        "sha256": "2f2ce6706fc93d7a",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file