component
TLV803SDBZR
Public Made by Adomby adom
Texas Instruments Supervisor and Reset ICs, SOT-23. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
orderable attributes: rebuild .lbr with adom-lbr 2.18.0 so MPN, MANUFACTURER and the distributor part numbers reach <technology> (DIGIKEY_PN 296-29196-2-ND, LCSC_PN C132016). The published library carried no attributes at all, so a BOM had nothing to buy from. Distributor PNs matched on exact MPN AND corroborating manufacturer.
2 files changed
+27−5
page.json+6−3@@ -26,7 +26,10 @@ "model_3d_step": "tlv803sdbzr.step", "lbr": "tlv803sdbzr.lbr" },- "distributor_links": {},+ "distributor_links": {+ "digikey": "296-29196-2-ND",+ "lcsc": "C132016"+ }, "pins": [ { "number": "1",@@ -38,13 +41,13 @@ "number": "2", "name": "RESET", "type": "output",- "description": "Active-low open-drain RESET output. Driven low when VDD falls below the negative-going threshold VIT- (2.93 V for TLV803S) and remains low for the delay time td (200 ms typ) after VDD exceeds VIT-. Requires a 10 kΩ to 1 MΩ external pull-up; pull-up voltage is not limited to VDD."+ "description": "Active-low open-drain RESET output. Driven low when VDD falls below the negative-going threshold VIT- (2.93 V for TLV803S) and remains low for the delay time td (200 ms typ) after VDD exceeds VIT-. Requires a 10 k\u03a9 to 1 M\u03a9 external pull-up; pull-up voltage is not limited to VDD." }, { "number": "3", "name": "VDD", "type": "power_in",- "description": "Supply voltage input. Recommended operating range 1.1 V to 6 V; absolute maximum 7 V. Place a 0.1 µF ceramic bypass capacitor close to this pin. Supply current IDD ≈ 9 µA typ."+ "description": "Supply voltage input. Recommended operating range 1.1 V to 6 V; absolute maximum 7 V. Place a 0.1 \u00b5F ceramic bypass capacitor close to this pin. Supply current IDD \u2248 9 \u00b5A typ." } ], "provenance": {
tlv803sdbzr.lbr+21−2@@ -57,6 +57,18 @@ <smd name="1" x="-0.9375" y="0.9500" dx="1.4750" dy="0.6000" layer="1"/> <smd name="2" x="-0.9375" y="-0.9500" dx="1.4750" dy="0.6000" layer="1"/> <smd name="3" x="0.9375" y="-0.0000" dx="1.4750" dy="0.6000" layer="1"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-1.3000" y="0.3800"/>+ <vertex x="-1.0600" y="0.0500"/>+ <vertex x="-1.5400" y="0.0500"/>+ </polygon>+ <polygon width="0.1000" layer="51">+ <vertex x="-0.3250" y="1.4500"/>+ <vertex x="0.6500" y="1.4500"/>+ <vertex x="0.6500" y="-1.4500"/>+ <vertex x="-0.6500" y="-1.4500"/>+ <vertex x="-0.6500" y="1.1250"/>+ </polygon> <wire x1="-0.7600" y1="1.5600" x2="0.7600" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.7600" y1="1.5100" x2="-0.7600" y2="1.5600" width="0.1200" layer="21"/> <wire x1="-0.7600" y1="-0.3900" x2="-0.7600" y2="0.3900" width="0.1200" layer="21"/>@@ -66,7 +78,7 @@ <wire x1="0.7600" y1="-1.5600" x2="-0.7600" y2="-1.5600" width="0.1200" layer="21"/> <text x="0" y="2.288" size="1.27" layer="25" align="bottom-center">>NAME</text> <text x="0" y="-2.288" size="1.27" layer="27" align="top-center">>VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.3000" y="0.3800"/><vertex x="-1.0600" y="0.0500"/><vertex x="-1.5400" y="0.0500"/></polygon></package>+</package> </packages> <symbols> <symbol name="TLV803SDBZR">@@ -94,7 +106,14 @@ <connect gate="G$1" pin="RESET" pad="2"/> <connect gate="G$1" pin="VDD" pad="3"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="TLV803SDBZR" constant="no"/>+ <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+ <attribute name="DIGIKEY_PN" value="296-29196-2-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C132016" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>