component
TLV751330500PDSQR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+48@@ -0,0 +1,48 @@+# TLV751330500PDSQR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · WSON-10-EP(2x2)++TLV751330500PDSQR from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | FB1/NC | unconnected | For the fixed TLV751xxxyyy device, this pin is not connected internally; on the adjustable TLV75101 it is the control-loop error amplifier input that sets the output voltage. |+| 2 | GND | power_in | Ground pin. |+| 3 | EN1 | input | Enable pin: drive above VEN1(HI) to turn the regulator on, and drive below VEN1(LO) to put the LDO into shutdown mode. |+| 4 | GND | power_in | Ground pin. |+| 5 | EN2 | input | Enable pin: drive above VEN2(HI) to turn the regulator on, and drive below VEN2(LO) to put the LDO into shutdown mode. |+| 6 | IN2 | power_in | Input pin for channel 2; the datasheet recommends a ceramic capacitor from IN to ground at the recommended value or larger, placed as close to the device as possible. |+| 7 | FB2/NC | unconnected | For the fixed TLV751xxxyyy device, this pin is not connected internally; on the adjustable TLV75101 it is the control-loop error amplifier input that sets the output voltage. |+| 8 | OUT2 | power_out | Regulated output voltage pin for channel 2; a capacitor is required from OUT to ground for stability. |+| 9 | IN1 | power_in | Input pin for channel 1; the datasheet recommends a ceramic capacitor from IN to ground at the recommended value or larger, placed as close to the device as possible. |+| 10 | OUT1 | power_out | Regulated output voltage pin for channel 1; a capacitor is required from OUT to ground for stability. |+| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | WSON-10-EP(2x2) |+| Category | Power Management (PMIC) |+| Pins | 11 |++## CAD (KiCad official)++- Symbol: `TLV751330500PDSQR`+- Footprint: `Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm`+- 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)+- 3D model files: `tlv751330500pdsqr-etched.step` / `tlv751330500pdsqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv751330500pdsqr.step` / `tlv751330500pdsqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv751) (32 pp, sha256 `c4d29cf923e325fc`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlv751330500pdsqr-datasheet.pdf)
page.jsonadded+219@@ -0,0 +1,219 @@+{+ "slug": "tlv751330500pdsqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, WSON-10-EP(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tlv751330500pdsqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tlv751330500pdsqr.kicad_sym",+ "tlv751330500pdsqr.kicad_mod",+ "tlv751330500pdsqr.glb",+ "tlv751330500pdsqr.step",+ "tlv751330500pdsqr.lbr",+ "docs/hero.png",+ "docs/tlv751330500pdsqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tlv751330500pdsqr-hero.glb",+ "tlv751330500pdsqr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TLV751330500PDSQR",+ "manufacturer": "Texas Instruments",+ "package": "WSON-10-EP(2x2)",+ "pin_count": 11,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tlv751",+ "parts": {+ "symbol": "tlv751330500pdsqr.kicad_sym",+ "footprint": "tlv751330500pdsqr.kicad_mod",+ "model_3d": "tlv751330500pdsqr-hero.glb",+ "model_3d_plain": "tlv751330500pdsqr.glb",+ "model_3d_step": "tlv751330500pdsqr-etched.step",+ "model_3d_step_plain": "tlv751330500pdsqr.step",+ "lbr": "tlv751330500pdsqr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2876338",+ "digikey": "296-TLV751330500PDSQRTR-ND",+ "mouser": "595-LV751330500PDSQR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T18:53:53Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TLV751330500PDSQRTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-LV751330500PDSQR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "FB1/NC",+ "type": "unconnected",+ "description": "For the fixed TLV751xxxyyy device, this pin is not connected internally; on the adjustable TLV75101 it is the control-loop error amplifier input that sets the output voltage."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin."+ },+ {+ "number": "3",+ "name": "EN1",+ "type": "input",+ "description": "Enable pin: drive above VEN1(HI) to turn the regulator on, and drive below VEN1(LO) to put the LDO into shutdown mode."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin."+ },+ {+ "number": "5",+ "name": "EN2",+ "type": "input",+ "description": "Enable pin: drive above VEN2(HI) to turn the regulator on, and drive below VEN2(LO) to put the LDO into shutdown mode."+ },+ {+ "number": "6",+ "name": "IN2",+ "type": "power_in",+ "description": "Input pin for channel 2; the datasheet recommends a ceramic capacitor from IN to ground at the recommended value or larger, placed as close to the device as possible."+ },+ {+ "number": "7",+ "name": "FB2/NC",+ "type": "unconnected",+ "description": "For the fixed TLV751xxxyyy device, this pin is not connected internally; on the adjustable TLV75101 it is the control-loop error amplifier input that sets the output voltage."+ },+ {+ "number": "8",+ "name": "OUT2",+ "type": "power_out",+ "description": "Regulated output voltage pin for channel 2; a capacitor is required from OUT to ground for stability."+ },+ {+ "number": "9",+ "name": "IN1",+ "type": "power_in",+ "description": "Input pin for channel 1; the datasheet recommends a ceramic capacitor from IN to ground at the recommended value or larger, placed as close to the device as possible."+ },+ {+ "number": "10",+ "name": "OUT1",+ "type": "power_out",+ "description": "Regulated output voltage pin for channel 1; a capacitor is required from OUT to ground for stability."+ },+ {+ "number": "11",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The thermal pad is an exposed pad on the WSON package with no printed pin number in the datasheet pi; FB1 and FB2 are listed as NC for the fixed-output TLV751xxxyyy family, which matches this fixed-volt; Pin types for IN and OUT are mapped to KiCad power_in and power_out because the datasheet labels the",+ "exposed pad 11 added from the footprint"+ ],+ "pages_sent": 9,+ "cost_usd": 0.0645,+ "at": "2026-10-08T18:53:13"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tlv751",+ "pages": 32,+ "sha256": "c4d29cf923e325fc",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 11,+ "described": 11,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tlv751330500pdsqr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2,+ 1.975,+ 0.8+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "f2001b3f9a6ae3d0c8b7e19aea57daac7f0bb7d40364983cd7bb958958273a6d",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlv751330500pdsqr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2,+ 1.975,+ 0.8+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5b48d3d5eaf14c1d967d0958f27022fb973971f855edf9c51b564e6617f4d6b2",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}