component
TLV70228PDBVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
tlv70228pdbvr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+87−7
package.json+45−5@@ -53,7 +53,7 @@ "number": "1", "name": "IN", "type": "input",- "description": "Input pin; a small 1-\u03bcF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance."+ "description": "Input pin; a small 1-μF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance." }, { "number": "2",@@ -65,7 +65,7 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable pin active high; driving EN above 0.9 V turns on regulator, below 0.4 V puts regulator into shutdown mode reducing operating current to 1 \u03bcA nominal; for TLV702P variant output voltage is discharged through internal 120-\u03a9 resistor when shut down."+ "description": "Enable pin active high; driving EN above 0.9 V turns on regulator, below 0.4 V puts regulator into shutdown mode reducing operating current to 1 μA nominal; for TLV702P variant output voltage is discharged through internal 120-Ω resistor when shut down." }, { "number": "4",@@ -77,7 +77,7 @@ "number": "5", "name": "OUT", "type": "output",- "description": "Regulated output voltage pin; a small 1-\u03bcF ceramic capacitor is needed from this pin to ground to assure stability."+ "description": "Regulated output voltage pin; a small 1-μF ceramic capacitor is needed from this pin to ground to assure stability." } ], "provenance": {@@ -112,6 +112,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tlv70228pdbvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlv70228pdbvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "26fab9147506ae46bbe1b9cfb75be1553b2b40490962fe25759dd5d545f25cc3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -97,7 +97,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tlv70228pdbvr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlv70228pdbvr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "26fab9147506ae46bbe1b9cfb75be1553b2b40490962fe25759dd5d545f25cc3",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -145,4 +185,4 @@ "public": true }, "updated_at": "2026-09-25T10:36:12.796Z"-}+}