component
TLV70228PDBVR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -38,7 +38,7 @@ "number": "1", "name": "IN", "type": "input",- "description": "Input pin; a small 1-\u03bcF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance."+ "description": "Input pin; a small 1-μF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance." }, { "number": "2",@@ -50,7 +50,7 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable pin active high; driving EN above 0.9 V turns on regulator, below 0.4 V puts regulator into shutdown mode reducing operating current to 1 \u03bcA nominal; for TLV702P variant output voltage is discharged through internal 120-\u03a9 resistor when shut down."+ "description": "Enable pin active high; driving EN above 0.9 V turns on regulator, below 0.4 V puts regulator into shutdown mode reducing operating current to 1 μA nominal; for TLV702P variant output voltage is discharged through internal 120-Ω resistor when shut down." }, { "number": "4",@@ -62,7 +62,7 @@ "number": "5", "name": "OUT", "type": "output",- "description": "Regulated output voltage pin; a small 1-\u03bcF ceramic capacitor is needed from this pin to ground to assure stability."+ "description": "Regulated output voltage pin; a small 1-μF ceramic capacitor is needed from this pin to ground to assure stability." } ], "provenance": {@@ -140,5 +140,8 @@ "docs/tlv70228pdbvr-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }