← Commit history

tlv70030dckt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·e400e0fa79 · ·parent dbfdffe
2 files changed +87−7
package.json+45−5
@@ -68,7 +68,7 @@         "number": "1",         "name": "IN",         "type": "input",-        "description": "Input pin. A small, 1-\u03bcF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance."+        "description": "Input pin. A small, 1-μF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance."       },       {         "number": "2",@@ -80,7 +80,7 @@         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator into shutdown mode and reduces operating current to 1 \u03bcA, nominal."+        "description": "Enable pin. Driving EN over 0.9 V turns on the regulator. Driving EN below 0.4 V puts the regulator into shutdown mode and reduces operating current to 1 μA, nominal."       },       {         "number": "4",@@ -92,7 +92,7 @@         "number": "5",         "name": "OUT",         "type": "output",-        "description": "Regulated output voltage pin. A small, 1-\u03bcF ceramic capacitor is needed from this pin to ground to assure stability."+        "description": "Regulated output voltage pin. A small, 1-μF ceramic capacitor is needed from this pin to ground to assure stability."       }     ],     "provenance": {@@ -127,6 +127,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tlv70030dckt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.1,+          2.0,+          1.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tlv70030dckt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.1,+          2.0,+          1.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "221f40b3c67050f0a89d63b4ec9f273c58cfc7a2de04232ac9cf07ba549326ec",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -112,7 +112,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "tlv70030dckt.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.1,+          2.0,+          1.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "tlv70030dckt-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          2.1,+          2.0,+          1.1+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "221f40b3c67050f0a89d63b4ec9f273c58cfc7a2de04232ac9cf07ba549326ec",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -159,4 +199,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}