← Commit history
tlv70025dckr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+87−7
package.json+45−5@@ -53,7 +53,7 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Input pin; a small 1-\u03bcF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance."+ "description": "Input pin; a small 1-μF ceramic capacitor is recommended from this pin to ground to assure stability and good transient performance." }, { "number": "2",@@ -65,7 +65,7 @@ "number": "3", "name": "EN", "type": "input",- "description": "Enable pin; driving EN above 0.9 V turns on the regulator, below 0.4 V puts the regulator into shutdown mode and reduces operating current to 1 \u03bcA nominal."+ "description": "Enable pin; driving EN above 0.9 V turns on the regulator, below 0.4 V puts the regulator into shutdown mode and reduces operating current to 1 μA nominal." }, { "number": "4",@@ -77,7 +77,7 @@ "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output voltage pin; a small 1-\u03bcF ceramic capacitor is needed from this pin to ground to assure stability."+ "description": "Regulated output voltage pin; a small 1-μF ceramic capacitor is needed from this pin to ground to assure stability." } ], "provenance": {@@ -112,6 +112,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tlv70025dckr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2.0,+ 1.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlv70025dckr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2.0,+ 1.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b54b4fe4ca6a5260aff1fcd7b6ac1b9560b5b34c2c0e4147fda07fd4173a3272",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -97,7 +97,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tlv70025dckr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2.0,+ 1.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "2860de5b7b085919ff6e952148353f928798588d9f544dc69430545aff2ba908",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlv70025dckr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.1,+ 2.0,+ 1.1+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b54b4fe4ca6a5260aff1fcd7b6ac1b9560b5b34c2c0e4147fda07fd4173a3272",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -145,4 +185,4 @@ "public": true }, "updated_at": "2026-09-25T10:34:09.669Z"-}+}