TLV3501 High-Speed Comparator

@@ -1,8 +1,11 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "tlv3501",+  "title": "TLV3501 High-Speed Comparator",+  "brief": "4.5 ns rail-to-rail high-speed comparator with push-pull output and shutdown.",   "version": "0.1.0",-  "type": "component",-  "description": "4.5 ns rail-to-rail high-speed comparator with push-pull output and shutdown.",+  "license": "CC-BY-SA-4.0",   "tags": [     "comparator",     "high-speed",@@ -11,6 +14,108 @@     "ti",     "sot-23-6"   ],+  "component": {+    "mpn": "TLV3501",+    "manufacturer": "Texas Instruments",+    "package": "SOT-23-6",+    "pin_count": 6,+    "category": "Analog",+    "subcategory": "Comparator",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tlv3501.pdf",+    "parts": {+      "symbol": "tlv3501.kicad_sym",+      "footprint": "tlv3501.kicad_mod",+      "model_3d": "tlv3501.glb"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "-IN",+        "type": "input",+        "description": "Inverting (negative) analog input of the comparator. Input common-mode range extends 0.2 V beyond both supply rails; input bias current is typically 2 pA. Signals swinging more than 0.3 V beyond the rails must be current-limited to <= 10 mA."+      },+      {+        "number": "2",+        "name": "V-",+        "type": "power_in",+        "description": "Negative (lowest) power supply. Typically tied to GND for single-supply operation; supports a total supply span of 2.7 V to 5.5 V between V+ and V- (2.2 V to 5.5 V operating range)."+      },+      {+        "number": "3",+        "name": "+IN",+        "type": "input",+        "description": "Noninverting (positive) analog input of the comparator. Input common-mode range extends 0.2 V beyond both supply rails; input bias current is typically 2 pA. Signals swinging more than 0.3 V beyond the rails must be current-limited to <= 10 mA."+      },+      {+        "number": "4",+        "name": "V+",+        "type": "power_in",+        "description": "Positive (highest) power supply. Supply voltage range is 2.7 V to 5.5 V nominal (2.2 V to 5.5 V operating). Bypass locally to V- with a low-ESR ceramic capacitor because of the 4.5 ns push-pull switching edges."+      },+      {+        "number": "5",+        "name": "OUT",+        "type": "output",+        "description": "Push-pull CMOS comparator output. Rail-to-rail swing (VOH/VOL within 30 mV typical of the rails at +/-1 mA). Directly drives CMOS or TTL logic. Short-circuit current to GND is limited to 74 mA (max)."+      },+      {+        "number": "6",+        "name": "SHDN",+        "type": "input",+        "description": "Active-low shutdown / enable input. When SHDN is within 0.9 V of V+ the comparator is enabled; when SHDN is more than 1.7 V below V+ the comparator is disabled and idles at ~2 uA. Turn-on ~100 ns, turn-off ~30 ns. Do not leave floating."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/tlv3501.pdf",+        "pages": 33,+        "sha256": "fcfbeffce8746298",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 6,+        "described": 6,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Type": "Single high-speed comparator",+      "Propagation delay": "4.5 ns typ",+      "Output": "Push-pull (rail-to-rail), no pull-up needed",+      "Inputs": "Rail-to-rail",+      "Supply voltage": "2.7 V to 5.5 V",+      "Shutdown": "Yes (SHDN pin)",+      "Operating temperature": "-40 C to 125 C"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "fast comparator",+    "high-speed comparator",+    "zero-crossing detector",+    "pulse generator"+  ],+  "discovery_pitch": "A 4.5 ns rail-to-rail comparator with a clean push-pull output for edge detection and fast triggering.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -26,10 +131,5 @@     "docs/tlv3501-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file