← Commit history

Initial commit: component/tlv320adc3101irger

Ray ·1362ccc4cd ·
2 files changed +306
README.mdadded+61
@@ -0,0 +1,61 @@+# TLV320ADC3101IRGER++**Texas Instruments** · ADCs/DACs - Special Purpose · VQFN-24-EP(4x4)++TLV320ADC3101IRGER from Texas Instruments, in a VQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | BCLK | bidirectional | Audio serial data bus bit clock input/output, configurable as input in slave mode or output in master mode |+| 2 | WCLK | bidirectional | Audio serial data bus word clock input/output, configurable as input in slave mode or output in master mode |+| 3 | DOUT | output | Audio serial data output supporting I2S/DSP/LJF/RJF/TDM modes with 16/20/24/32-bit word length and programmable tri-state capability |+| 4 | RESET | input | Active-low asynchronous reset input requiring minimum 10 ns pulse width after power supply stabilization |+| 5 | MICBIAS1 | output | Programmable microphone bias voltage output selectable to 2.0 V, 2.5 V, or AVDD with 4 mA maximum source current |+| 6 | IN3L(M) | input | Analog audio input for left ADC channel, configurable as single-ended or differential minus paired with IN2L(P) |+| 7 | IN2L(P) | input | Analog audio input for left ADC channel, configurable as single-ended or differential plus paired with IN3L(M) |+| 8 | IN1L(P) | input | Analog audio input configurable for left-channel single-ended or differential plus with IN1R(M), with input impedance 35 kΩ to 46.3 kΩ depending on configuration |+| 9 | AVSS | power_in | Analog ground supply reference, 0 V nominal |+| 10 | AVDD | power_in | Analog power supply input, 2.6 V to 3.6 V operating range with 0.1 µF and 1 µF decoupling capacitors recommended |+| 11 | IN1R(M) | input | Analog audio input configurable for left-channel single-ended or differential minus with IN1L(P), or right-channel operation |+| 12 | IN2R(P) | input | Analog audio input for right ADC channel, configurable as single-ended or differential plus paired with IN3R(M) |+| 13 | IN3R(M) | input | Analog audio input for right ADC channel, configurable as single-ended or differential minus paired with IN2R(P) |+| 14 | MICBIAS2 | output | Programmable microphone bias voltage output selectable to 2.0 V, 2.5 V, or AVDD with 4 mA maximum source current |+| 15 | I2C_ADR0 | input | I2C slave address configuration pin defining bit 0 of 7-bit address, tied high or low at board design time |+| 16 | I2C_ADR1 | input | I2C slave address configuration pin defining bit 1 of 7-bit address, tied high or low at board design time |+| 17 | SCL | bidirectional | I2C serial clock open-drain input/output supporting standard mode (100 kHz) and fast mode (400 kHz) with external pull-up resistor required |+| 18 | SDA | bidirectional | I2C serial data open-drain input/output supporting standard mode (100 kHz) and fast mode (400 kHz) with external pull-up resistor required |+| 19 | DMDIN/GPIO1 | bidirectional | Digital microphone data input or programmable general-purpose input/output with multifunction capability for secondary audio interface or clock distribution |+| 20 | DMCLK/GPIO2 | bidirectional | Digital microphone clock or programmable general-purpose input/output with multifunction capability for secondary audio interface or PLL clock input |+| 21 | IOVDD | power_in | Digital I/O power supply input, 1.1 V to 3.6 V operating range with 0.1 µF decoupling capacitor recommended |+| 22 | DVDD | power_in | Digital core power supply input, 1.65 V to 1.95 V operating range with 0.1 µF and 1 µF decoupling capacitors recommended |+| 23 | DVSS | power_in | Digital ground supply reference, 0 V nominal, connected to thermal pad |+| 24 | MCLK | input | Master clock input for ADC and internal clock generation, 512 kHz to 50 MHz operating range supporting fixed clock divider or PLL multiplication |+| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | VQFN-24-EP(4x4) |+| Category | Data Acquisition |+| Pins | 25 |++## CAD (KiCad official)++- Symbol: `TLV320ADC3101IRGER`+- Footprint: `Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm`+- 3D model: VQFN-24-EP(4x4) (KiCad packages3D, STEP)+- 3D model files: `tlv320adc3101irger-etched.step` / `tlv320adc3101irger-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlv320adc3101irger.step` / `tlv320adc3101irger.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlv320adc3101) (96 pp, sha256 `0ffb85b5833b851e`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlv320adc3101irger-datasheet.pdf)
page.jsonadded+245
@@ -0,0 +1,245 @@+{+  "slug": "tlv320adc3101irger",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments ADCs/DACs - Special Purpose, VQFN-24-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "tlv320adc3101irger",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlv320adc3101irger.kicad_sym",+    "tlv320adc3101irger.kicad_mod",+    "tlv320adc3101irger.glb",+    "tlv320adc3101irger.step",+    "tlv320adc3101irger.lbr",+    "docs/hero.png",+    "docs/tlv320adc3101irger-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLV320ADC3101IRGER",+    "manufacturer": "Texas Instruments",+    "package": "VQFN-24-EP(4x4)",+    "pin_count": 25,+    "category": "Data Acquisition",+    "subcategory": "ADCs/DACs - Special Purpose",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlv320adc3101",+    "parts": {+      "symbol": "tlv320adc3101irger.kicad_sym",+      "footprint": "tlv320adc3101irger.kicad_mod",+      "model_3d": "tlv320adc3101irger-etched.glb",+      "model_3d_plain": "tlv320adc3101irger.glb",+      "model_3d_step": "tlv320adc3101irger-etched.step",+      "model_3d_step_plain": "tlv320adc3101irger.step",+      "lbr": "tlv320adc3101irger.lbr"+    },+    "distributor_links": {+      "lcsc": "C162409"+    },+    "pins": [+      {+        "number": "1",+        "name": "BCLK",+        "type": "bidirectional",+        "description": "Audio serial data bus bit clock input/output, configurable as input in slave mode or output in master mode"+      },+      {+        "number": "2",+        "name": "WCLK",+        "type": "bidirectional",+        "description": "Audio serial data bus word clock input/output, configurable as input in slave mode or output in master mode"+      },+      {+        "number": "3",+        "name": "DOUT",+        "type": "output",+        "description": "Audio serial data output supporting I2S/DSP/LJF/RJF/TDM modes with 16/20/24/32-bit word length and programmable tri-state capability"+      },+      {+        "number": "4",+        "name": "RESET",+        "type": "input",+        "description": "Active-low asynchronous reset input requiring minimum 10 ns pulse width after power supply stabilization"+      },+      {+        "number": "5",+        "name": "MICBIAS1",+        "type": "output",+        "description": "Programmable microphone bias voltage output selectable to 2.0 V, 2.5 V, or AVDD with 4 mA maximum source current"+      },+      {+        "number": "6",+        "name": "IN3L(M)",+        "type": "input",+        "description": "Analog audio input for left ADC channel, configurable as single-ended or differential minus paired with IN2L(P)"+      },+      {+        "number": "7",+        "name": "IN2L(P)",+        "type": "input",+        "description": "Analog audio input for left ADC channel, configurable as single-ended or differential plus paired with IN3L(M)"+      },+      {+        "number": "8",+        "name": "IN1L(P)",+        "type": "input",+        "description": "Analog audio input configurable for left-channel single-ended or differential plus with IN1R(M), with input impedance 35 kΩ to 46.3 kΩ depending on configuration"+      },+      {+        "number": "9",+        "name": "AVSS",+        "type": "power_in",+        "description": "Analog ground supply reference, 0 V nominal"+      },+      {+        "number": "10",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply input, 2.6 V to 3.6 V operating range with 0.1 µF and 1 µF decoupling capacitors recommended"+      },+      {+        "number": "11",+        "name": "IN1R(M)",+        "type": "input",+        "description": "Analog audio input configurable for left-channel single-ended or differential minus with IN1L(P), or right-channel operation"+      },+      {+        "number": "12",+        "name": "IN2R(P)",+        "type": "input",+        "description": "Analog audio input for right ADC channel, configurable as single-ended or differential plus paired with IN3R(M)"+      },+      {+        "number": "13",+        "name": "IN3R(M)",+        "type": "input",+        "description": "Analog audio input for right ADC channel, configurable as single-ended or differential minus paired with IN2R(P)"+      },+      {+        "number": "14",+        "name": "MICBIAS2",+        "type": "output",+        "description": "Programmable microphone bias voltage output selectable to 2.0 V, 2.5 V, or AVDD with 4 mA maximum source current"+      },+      {+        "number": "15",+        "name": "I2C_ADR0",+        "type": "input",+        "description": "I2C slave address configuration pin defining bit 0 of 7-bit address, tied high or low at board design time"+      },+      {+        "number": "16",+        "name": "I2C_ADR1",+        "type": "input",+        "description": "I2C slave address configuration pin defining bit 1 of 7-bit address, tied high or low at board design time"+      },+      {+        "number": "17",+        "name": "SCL",+        "type": "bidirectional",+        "description": "I2C serial clock open-drain input/output supporting standard mode (100 kHz) and fast mode (400 kHz) with external pull-up resistor required"+      },+      {+        "number": "18",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C serial data open-drain input/output supporting standard mode (100 kHz) and fast mode (400 kHz) with external pull-up resistor required"+      },+      {+        "number": "19",+        "name": "DMDIN/GPIO1",+        "type": "bidirectional",+        "description": "Digital microphone data input or programmable general-purpose input/output with multifunction capability for secondary audio interface or clock distribution"+      },+      {+        "number": "20",+        "name": "DMCLK/GPIO2",+        "type": "bidirectional",+        "description": "Digital microphone clock or programmable general-purpose input/output with multifunction capability for secondary audio interface or PLL clock input"+      },+      {+        "number": "21",+        "name": "IOVDD",+        "type": "power_in",+        "description": "Digital I/O power supply input, 1.1 V to 3.6 V operating range with 0.1 µF decoupling capacitor recommended"+      },+      {+        "number": "22",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital core power supply input, 1.65 V to 1.95 V operating range with 0.1 µF and 1 µF decoupling capacitors recommended"+      },+      {+        "number": "23",+        "name": "DVSS",+        "type": "power_in",+        "description": "Digital ground supply reference, 0 V nominal, connected to thermal pad"+      },+      {+        "number": "24",+        "name": "MCLK",+        "type": "input",+        "description": "Master clock input for ADC and internal clock generation, 512 kHz to 50 MHz operating range supporting fixed clock divider or PLL multiplication"+      },+      {+        "number": "25",+        "name": "EP",+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "exposed pad 25 added from the footprint"+        ],+        "pages_sent": 96,+        "cost_usd": 0.805,+        "at": "2026-09-21T16:23:25"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlv320adc3101",+        "pages": 96,+        "sha256": "0ffb85b5833b851e",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 25,+        "described": 25,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file