tlv2634id

@@ -30,5 +30,114 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "TLV2634ID",+    "manufacturer": "UMW",+    "package": "SOP-14",+    "pin_count": 14,+    "category": "Operational Amplifier",+    "parts": {+      "symbol": "tlv2634id.kicad_sym",+      "footprint": "tlv2634id.kicad_mod",+      "model_3d": "tlv2634id-etched.glb",+      "model_3d_plain": "tlv2634id.glb",+      "model_3d_step": "tlv2634id-etched.step",+      "model_3d_step_plain": "tlv2634id.step",+      "lbr": "tlv2634id.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "1OUT",+        "type": "output",+        "description": "Output of op-amp channel 1. Rail-to-rail output; can source ~28 mA and sink ~28 mA at VDD=5V (Vo=0.5V from rail). Short-circuit current typically 95 mA at VDD=5V."+      },+      {+        "number": "2",+        "name": "1IN-",+        "type": "input",+        "description": "Inverting input of op-amp channel 1. Input voltage range is GND to VDD-1V; input bias current typically 1 pA (50 pA max at 25°C). Differential input resistance ~1000 GΩ."+      },+      {+        "number": "3",+        "name": "1IN+",+        "type": "input",+        "description": "Non-inverting input of op-amp channel 1. Common-mode input range includes ground (VICR: GND to VDD-1V). Common-mode input capacitance ~12 pF."+      },+      {+        "number": "4",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply rail for all four amplifiers. Recommended 2.7V to 5.5V single-supply (or ±1.35V to ±2.75V split); absolute maximum 6V. Total quiescent current ~730 µA per channel."+      },+      {+        "number": "5",+        "name": "2IN+",+        "type": "input",+        "description": "Non-inverting input of op-amp channel 2. Common-mode input range GND to VDD-1V."+      },+      {+        "number": "6",+        "name": "2IN-",+        "type": "input",+        "description": "Inverting input of op-amp channel 2. Input bias current typically 1 pA; differential input resistance ~1000 GΩ."+      },+      {+        "number": "7",+        "name": "2OUT",+        "type": "output",+        "description": "Output of op-amp channel 2. Rail-to-rail output stage; VOH ≈ VDD-0.02V at IOH=-1mA (VDD=5V), VOL ≈ 25 µV at IOL=1mA (VDD=5V)."+      },+      {+        "number": "8",+        "name": "3OUT",+        "type": "output",+        "description": "Output of op-amp channel 3. Rail-to-rail output; max output current ±40 mA absolute max."+      },+      {+        "number": "9",+        "name": "3IN-",+        "type": "input",+        "description": "Inverting input of op-amp channel 3. Input current absolute maximum ±10 mA per input pin."+      },+      {+        "number": "10",+        "name": "3IN+",+        "type": "input",+        "description": "Non-inverting input of op-amp channel 3. Common-mode input range GND to VDD-1V; CMRR typically 100 dB."+      },+      {+        "number": "11",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / negative supply reference for all four amplifiers. Input common-mode range extends down to this rail, allowing direct interface with ground-referred signal sources."+      },+      {+        "number": "12",+        "name": "4IN+",+        "type": "input",+        "description": "Non-inverting input of op-amp channel 4. Common-mode input range GND to VDD-1V."+      },+      {+        "number": "13",+        "name": "4IN-",+        "type": "input",+        "description": "Inverting input of op-amp channel 4. Input offset voltage typically 250 µV (4.2 mV max) at 25°C for TLV2634."+      },+      {+        "number": "14",+        "name": "4OUT",+        "type": "output",+        "description": "Output of op-amp channel 4. Rail-to-rail output stage; large-signal voltage amplification typically 100 dB into RL=2 kΩ."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}