tlv1117cdcyr

@@ -33,5 +33,55 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "TLV1117CDCYR",+    "manufacturer": "Texas Instruments",+    "package": "SOT-223-4",+    "pin_count": 4,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "datasheet": "https://www.ti.com/lit/ds/symlink/tlv1117cdcyr.pdf",+    "parts": {+      "symbol": "tlv1117cdcyr.kicad_sym",+      "footprint": "tlv1117cdcyr.kicad_mod",+      "model_3d": "tlv1117cdcyr-etched.glb",+      "model_3d_plain": "tlv1117cdcyr.glb",+      "model_3d_step": "tlv1117cdcyr-etched.step",+      "model_3d_step_plain": "tlv1117cdcyr.step",+      "lbr": "tlv1117cdcyr.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "ADJ",+        "type": "input",+        "description": "Adjust pin for the adjustable-output variant (TLV1117CDCYR). Output voltage is set by an external resistor divider from OUT to ADJ to GND, referenced to VREF = 1.25 V (typ). ADJ pin current is 80 µA typ (120 µA max); change in ADJ pin current is 0.2 µA typ (5 µA max for C-temp) over VIN-VOUT = 1.4 V to 10 V and IOUT = 10 mA to 800 mA. On fixed-voltage TLV1117-xx options this pin becomes GND."+      },+      {+        "number": "2",+        "name": "OUT",+        "type": "power_out",+        "description": "Regulated output pin. Provides up to 800 mA. Requires an output capacitor (typ 10 µF tantalum or aluminum electrolytic) with ESR between 0.2 Ω and 10 Ω for stability. Internally tied to pin 4 (tab)."+      },+      {+        "number": "3",+        "name": "IN",+        "type": "power_in",+        "description": "Unregulated input supply. Recommended operating range for the adjustable TLV1117 is 2.7 V to 15 V; absolute maximum VIN is 16 V. A 10-µF input capacitor is recommended."+      },+      {+        "number": "4",+        "name": "OUT",+        "type": "power_out",+        "description": "Thermal tab / large pad; internally connected to the OUT pin (pin 2). Must be soldered to a copper area to spread heat - the DCY package has θJA ≈ 104.3 °C/W. Connect to the same net as pin 2 (VOUT)."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}