component
TLIN10285SDRQ1
Public Made by Adomby adom
Texas Instruments LIN Transceivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+45@@ -0,0 +1,45 @@+# TLIN10285SDRQ1++**Texas Instruments** · LIN Transceivers · SOIC-8++TLIN10285SDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VSUP | power_in | Device supply input, connected to the battery through an external reverse-blocking diode; recommended VSUP is 5.5 V to 28 V with a 100 nF VSUP capacitor. |+| 2 | EN | input | Enable input that selects the transceiver mode (EN = VCC for normal mode, EN = 0 V for standby mode per the electrical characteristics). |+| 3 | GND | power_in | Ground reference; when the thermal pad is present it must be soldered to the ground plane. |+| 4 | LIN | bidirectional | High-voltage LIN bus single-wire transmitter and receiver, rated for ±58 V LIN bus fault protection and a recommended bus input voltage of 0 V to 28 V. |+| 5 | RXD | output | Open-drain digital output that reports the state of the LIN bus voltage to the microcontroller; recommended maximum LOW output current is 2 mA. |+| 6 | TXD | input | Digital input that controls the state of the LIN bus output; logic input rated up to 6 V absolute maximum. |+| 7 | nRST | output | Active-low reset output; reset output current is limited to 5 mA absolute maximum. |+| 8 | VCC | power_out | Output of the integrated LDO regulator (3.3 V or 5 V), which requires a 10 µF VCC capacitor with ESR of 0.001 Ω to 2 Ω; the device supplies up to 70 mA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Interface |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TLIN10285SDRQ1`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `tlin10285sdrq1-etched.step` / `tlin10285sdrq1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlin10285sdrq1.step` / `tlin10285sdrq1.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlin1028s-q1) (42 pp, sha256 `1334ffb6c661c5a6`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlin10285sdrq1-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "tlin10285sdrq1",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LIN Transceivers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "tlin10285sdrq1",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tlin10285sdrq1.kicad_sym",+ "tlin10285sdrq1.kicad_mod",+ "tlin10285sdrq1.glb",+ "tlin10285sdrq1.step",+ "tlin10285sdrq1.lbr",+ "docs/hero.png",+ "docs/tlin10285sdrq1-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tlin10285sdrq1-hero.glb",+ "tlin10285sdrq1-hero.overlay.json"+ ],+ "component": {+ "mpn": "TLIN10285SDRQ1",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Interface",+ "subcategory": "LIN Transceivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tlin1028s-q1",+ "parts": {+ "symbol": "tlin10285sdrq1.kicad_sym",+ "footprint": "tlin10285sdrq1.kicad_mod",+ "model_3d": "tlin10285sdrq1-hero.glb",+ "model_3d_plain": "tlin10285sdrq1.glb",+ "model_3d_step": "tlin10285sdrq1-etched.step",+ "model_3d_step_plain": "tlin10285sdrq1.step",+ "lbr": "tlin10285sdrq1.lbr"+ },+ "distributor_links": {+ "lcsc": "C1852060",+ "digikey": "296-TLIN10285SDRQ1TR-ND",+ "mouser": "595-TLIN10285SDRQ1"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T01:28:42Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-TLIN10285SDRQ1TR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TLIN10285SDRQ1",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "VSUP",+ "type": "power_in",+ "description": "Device supply input, connected to the battery through an external reverse-blocking diode; recommended VSUP is 5.5 V to 28 V with a 100 nF VSUP capacitor."+ },+ {+ "number": "2",+ "name": "EN",+ "type": "input",+ "description": "Enable input that selects the transceiver mode (EN = VCC for normal mode, EN = 0 V for standby mode per the electrical characteristics)."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference; when the thermal pad is present it must be soldered to the ground plane."+ },+ {+ "number": "4",+ "name": "LIN",+ "type": "bidirectional",+ "description": "High-voltage LIN bus single-wire transmitter and receiver, rated for ±58 V LIN bus fault protection and a recommended bus input voltage of 0 V to 28 V."+ },+ {+ "number": "5",+ "name": "RXD",+ "type": "output",+ "description": "Open-drain digital output that reports the state of the LIN bus voltage to the microcontroller; recommended maximum LOW output current is 2 mA."+ },+ {+ "number": "6",+ "name": "TXD",+ "type": "input",+ "description": "Digital input that controls the state of the LIN bus output; logic input rated up to 6 V absolute maximum."+ },+ {+ "number": "7",+ "name": "nRST",+ "type": "output",+ "description": "Active-low reset output; reset output current is limited to 5 mA absolute maximum."+ },+ {+ "number": "8",+ "name": "VCC",+ "type": "power_out",+ "description": "Output of the integrated LDO regulator (3.3 V or 5 V), which requires a 10 µF VCC capacitor with ESR of 0.001 Ω to 2 Ω; the device supplies up to 70 mA."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin table is for the TLIN1028S-Q1 family (D package, 8-pin SOIC). The orderable addendum lists T; The pin descriptions combine the pin function from the Table 6-1 with limits stated elsewhere in the; The GND pin is described with a thermal pad footnote; the datasheet does not assign a separate pad n"+ ],+ "pages_sent": 9,+ "cost_usd": 0.054,+ "at": "2026-10-08T01:28:26"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tlin1028s-q1",+ "pages": 42,+ "sha256": "1334ffb6c661c5a6",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tlin10285sdrq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlin10285sdrq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9913a797f1d246a7a1b9349f56025ae7a7fbc1220c537889d17e67393ebed14d",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}