← Commit history
tle2062cdr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+92−12
package.json+50−10@@ -68,49 +68,49 @@ "number": "1", "name": "1OUT", "type": "output",- "description": "Output of amplifier 1; specified to drive 100 \u03a9 loads; output swing \u00b13.5 V min into 10 k\u03a9 at \u00b15 V supply (VCC\u00b1 = \u00b15 V, 25\u00b0C)."+ "description": "Output of amplifier 1; specified to drive 100 Ω loads; output swing ±3.5 V min into 10 kΩ at ±5 V supply (VCC± = ±5 V, 25°C)." }, { "number": "2", "name": "1IN-", "type": "input",- "description": "Inverting input of amplifier 1; FET input with IIB = \u00b110 pA typical at 25\u00b0C; common-mode range -1.6 V to +4 V at VCC\u00b1 = \u00b15 V."+ "description": "Inverting input of amplifier 1; FET input with IIB = ±10 pA typical at 25°C; common-mode range -1.6 V to +4 V at VCC± = ±5 V." }, { "number": "3", "name": "1IN+", "type": "input",- "description": "Non-inverting input of amplifier 1; FET input with IIB = \u00b110 pA typical at 25\u00b0C; common-mode range -1.6 V to +4 V at VCC\u00b1 = \u00b15 V."+ "description": "Non-inverting input of amplifier 1; FET input with IIB = ±10 pA typical at 25°C; common-mode range -1.6 V to +4 V at VCC± = ±5 V." }, { "number": "4", "name": "VCC-", "type": "power_in",- "description": "Negative supply rail; recommended range \u00b13.5 V to \u00b118 V (differential); absolute maximum supply differential 38 V."+ "description": "Negative supply rail; recommended range ±3.5 V to ±18 V (differential); absolute maximum supply differential 38 V." }, { "number": "5", "name": "2IN+", "type": "input",- "description": "Non-inverting input of amplifier 2; FET input with IIB = \u00b110 pA typical at 25\u00b0C; common-mode range -1.6 V to +4 V at VCC\u00b1 = \u00b15 V."+ "description": "Non-inverting input of amplifier 2; FET input with IIB = ±10 pA typical at 25°C; common-mode range -1.6 V to +4 V at VCC± = ±5 V." }, { "number": "6", "name": "2IN-", "type": "input",- "description": "Inverting input of amplifier 2; FET input with IIB = \u00b110 pA typical at 25\u00b0C; common-mode range -1.6 V to +4 V at VCC\u00b1 = \u00b15 V."+ "description": "Inverting input of amplifier 2; FET input with IIB = ±10 pA typical at 25°C; common-mode range -1.6 V to +4 V at VCC± = ±5 V." }, { "number": "7", "name": "2OUT", "type": "output",- "description": "Output of amplifier 2; specified to drive 100 \u03a9 loads; output swing \u00b13.5 V min into 10 k\u03a9 at \u00b15 V supply (VCC\u00b1 = \u00b15 V, 25\u00b0C)."+ "description": "Output of amplifier 2; specified to drive 100 Ω loads; output swing ±3.5 V min into 10 kΩ at ±5 V supply (VCC± = ±5 V, 25°C)." }, { "number": "8", "name": "VCC+", "type": "power_in",- "description": "Positive supply rail; recommended range \u00b13.5 V to \u00b118 V (differential); absolute maximum supply differential 38 V."+ "description": "Positive supply rail; recommended range ±3.5 V to ±18 V (differential); absolute maximum supply differential 38 V." } ], "provenance": {@@ -147,6 +147,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tle2062cdr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tle2062cdr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b6a6966e0bfceaba3a9f24afcc80c3e0f2ca8ffaf81009c38d02adebf56e3546",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -132,7 +132,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "tle2062cdr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tle2062cdr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "b6a6966e0bfceaba3a9f24afcc80c3e0f2ca8ffaf81009c38d02adebf56e3546",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -179,4 +219,4 @@ "visibility": { "public": true }-}+}