component
TLC7701QPWR
Public Made by Adomby adom
Texas Instruments Monitors & Reset Circuits, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# TLC7701QPWR++**Texas Instruments** · Monitors & Reset Circuits · TSSOP-8++TLC7701QPWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CONTROL | input | Control input for static-RAM power-down support; when tied to GND, RESET acts as active high, with input levels VIL max 0.2×VDD and VIH min 0.7×VDD. |+| 2 | RESIN | input | Reset input that, together with CONTROL and SENSE, determines the RESET and RESET output states per the function table, with VIL max 0.2×VDD and VIH min 0.7×VDD. |+| 3 | CT | passive | External timing capacitor connection that sets the reset delay time td = 2.1 × 10^4 × CT (CT in farads, td in seconds). |+| 4 | GND | power_in | Ground reference for the device; all voltage values are with respect to GND. |+| 5 | RESET | output | Active-low reset output (totem-pole), asserted when VDD reaches 1 V or SENSE is below threshold, rated for 2 mA high or low output current. |+| 6 | RESET | output | Active-high reset output (totem-pole) with 2 mA recommended output current, which is the complement of the active-low reset output. |+| 7 | SENSE | input | Voltage-sense input compared to the negative-going threshold (1.1 V typ for TLC7701, set by two external resistors), absolute maximum input range -0.3 to 7 V. |+| 8 | VDD | power_in | Supply voltage input, recommended operating range 2 V to 6 V with 7 V absolute maximum, and a 0.1 µF ceramic bypass capacitor recommended nearby. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-8 |+| Category | Power Supply Chip |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `TLC7701QPWR`+- Footprint: `Package_SO:TSSOP-8_3x3mm_P0.65mm`+- 3D model: TSSOP-8 (KiCad packages3D, STEP)+- 3D model files: `tlc7701qpwr-etched.step` / `tlc7701qpwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc7701qpwr.step` / `tlc7701qpwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc77) (38 pp, sha256 `3147b2830d2531af`, retrieved 2026-10-08, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc7701qpwr-datasheet.pdf)
page.jsonadded+200@@ -0,0 +1,200 @@+{+ "slug": "tlc7701qpwr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Monitors & Reset Circuits, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power supply chip",+ "tlc7701qpwr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tlc7701qpwr.kicad_sym",+ "tlc7701qpwr.kicad_mod",+ "tlc7701qpwr.glb",+ "tlc7701qpwr.step",+ "tlc7701qpwr.lbr",+ "docs/hero.png",+ "docs/tlc7701qpwr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tlc7701qpwr-hero.glb",+ "tlc7701qpwr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TLC7701QPWR",+ "manufacturer": "Texas Instruments",+ "package": "TSSOP-8",+ "pin_count": 8,+ "category": "Power Supply Chip",+ "subcategory": "Monitors & Reset Circuits",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tlc77",+ "parts": {+ "symbol": "tlc7701qpwr.kicad_sym",+ "footprint": "tlc7701qpwr.kicad_mod",+ "model_3d": "tlc7701qpwr-hero.glb",+ "model_3d_plain": "tlc7701qpwr.glb",+ "model_3d_step": "tlc7701qpwr-etched.step",+ "model_3d_step_plain": "tlc7701qpwr.step",+ "lbr": "tlc7701qpwr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2070490",+ "digikey": "TLC7701QPWR-ND",+ "mouser": "595-TLC7701QPWR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T15:28:10Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "TLC7701QPWR-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TLC7701QPWR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "CONTROL",+ "type": "input",+ "description": "Control input for static-RAM power-down support; when tied to GND, RESET acts as active high, with input levels VIL max 0.2×VDD and VIH min 0.7×VDD."+ },+ {+ "number": "2",+ "name": "RESIN",+ "type": "input",+ "description": "Reset input that, together with CONTROL and SENSE, determines the RESET and RESET output states per the function table, with VIL max 0.2×VDD and VIH min 0.7×VDD."+ },+ {+ "number": "3",+ "name": "CT",+ "type": "passive",+ "description": "External timing capacitor connection that sets the reset delay time td = 2.1 × 10^4 × CT (CT in farads, td in seconds)."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device; all voltage values are with respect to GND."+ },+ {+ "number": "5",+ "name": "RESET",+ "type": "output",+ "description": "Active-low reset output (totem-pole), asserted when VDD reaches 1 V or SENSE is below threshold, rated for 2 mA high or low output current."+ },+ {+ "number": "6",+ "name": "RESET",+ "type": "output",+ "description": "Active-high reset output (totem-pole) with 2 mA recommended output current, which is the complement of the active-low reset output."+ },+ {+ "number": "7",+ "name": "SENSE",+ "type": "input",+ "description": "Voltage-sense input compared to the negative-going threshold (1.1 V typ for TLC7701, set by two external resistors), absolute maximum input range -0.3 to 7 V."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage input, recommended operating range 2 V to 6 V with 7 V absolute maximum, and a 0.1 µF ceramic bypass capacitor recommended nearby."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text+vision",+ "consensus_model": "claude-opus-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The pin 5 and pin 6 overbars were read from the rendered image: pin 5 is the overbarred (active-low); The datasheet does not list pin function descriptions, so the descriptions are inferred from the des",+ "vision extraction: provenance cannot be text-verified; needs consensus"+ ],+ "pages_sent": 38,+ "cost_usd": 0.8872,+ "at": "2026-10-08T15:27:53"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tlc77",+ "pages": 38,+ "sha256": "3147b2830d2531af",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tlc7701qpwr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "cf28a51742b2e31065e201d1b313207140cbfb49062efd938788f7a310d02738",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tlc7701qpwr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.9,+ 3,+ 1.1+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "a2f6c4de5e207d88c76517a6990ee307dcf544f373d5c37f4e6d10f4a3ea6ec3",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}