← Commit history

Initial commit: component/tlc59283dbqr

Ray ·2bb609f66d ·
2 files changed +313
README.mdadded+61
@@ -0,0 +1,61 @@+# TLC59283DBQR++**Texas Instruments** · LED Drivers · SSOP-24-150mil++TLC59283DBQR from Texas Instruments, in a SSOP-24-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Power supply ground. |+| 2 | SIN | input | Serial data input for driver switch control; Schmitt buffer input, set logic high to shift '1' into shift register LSB or logic low to shift '0' on SCLK rising edge. |+| 3 | SCLK | input | Serial clock input; Schmitt buffer input, all data in 16-bit shift register shifted one bit toward MSB on each rising edge. |+| 4 | LAT | input | Latch input; Schmitt buffer input, when high shift register data continuously transfers to output latch, when low output latch data held, internally pulled down to GND through 500kΩ resistor. |+| 5 | OUT0 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 6 | OUT1 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 7 | OUT2 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 8 | OUT3 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 9 | OUT4 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 10 | OUT5 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 11 | OUT6 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 12 | OUT7 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 13 | OUT8 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 14 | OUT9 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 15 | OUT10 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 16 | OUT11 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 17 | OUT12 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 18 | OUT13 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 19 | OUT14 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 20 | OUT15 | output | Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor. |+| 21 | BLANK | input | Blanking control; Schmitt buffer input, when high forces all constant-current outputs off and enables all pre-charge FETs, when low outputs controlled by latch data, internally pulled up to VCC through 500kΩ resistor. |+| 22 | SOUT | output | Serial data output connected to 16-bit shift register MSB; output data transitions on SCLK rising edge. |+| 23 | IREF | input | Reference current input; external resistor connected between IREF and GND sets constant output current for all 16 outputs. |+| 24 | VCC | power_in | Power supply voltage input, 3.0V to 5.5V operating range. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-24-150mil |+| Category | LED Drivers |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `TLC59283DBQR`+- Footprint: `Package_SO:SSOP-24_5.3x8.2mm_P0.65mm`+- 3D model: SSOP-24-150mil (KiCad packages3D, STEP)+- 3D model files: `tlc59283dbqr-etched.step` / `tlc59283dbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc59283dbqr.step` / `tlc59283dbqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc59283) (38 pp, sha256 `98e3aee5cb12a4d5`, retrieved 2026-09-24, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc59283dbqr-datasheet.pdf)
page.jsonadded+252
@@ -0,0 +1,252 @@+{+  "slug": "tlc59283dbqr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments LED Drivers, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "led drivers",+    "tlc59283dbqr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlc59283dbqr.kicad_sym",+    "tlc59283dbqr.kicad_mod",+    "tlc59283dbqr.glb",+    "tlc59283dbqr.step",+    "tlc59283dbqr.lbr",+    "docs/hero.png",+    "docs/tlc59283dbqr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLC59283DBQR",+    "manufacturer": "Texas Instruments",+    "package": "SSOP-24-150mil",+    "pin_count": 24,+    "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc59283",+    "parts": {+      "symbol": "tlc59283dbqr.kicad_sym",+      "footprint": "tlc59283dbqr.kicad_mod",+      "model_3d": "tlc59283dbqr-etched.glb",+      "model_3d_plain": "tlc59283dbqr.glb",+      "model_3d_step": "tlc59283dbqr-etched.step",+      "model_3d_step_plain": "tlc59283dbqr.step",+      "lbr": "tlc59283dbqr.lbr"+    },+    "distributor_links": {+      "lcsc": "C702075",+      "digikey": "296-30546-2-ND",+      "mouser": "595-TLC59283DBQR"+    },+    "distributor_check": {+      "checked_at": "2026-09-24T23:02:21Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-30546-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TLC59283DBQR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Power supply ground."+      },+      {+        "number": "2",+        "name": "SIN",+        "type": "input",+        "description": "Serial data input for driver switch control; Schmitt buffer input, set logic high to shift '1' into shift register LSB or logic low to shift '0' on SCLK rising edge."+      },+      {+        "number": "3",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock input; Schmitt buffer input, all data in 16-bit shift register shifted one bit toward MSB on each rising edge."+      },+      {+        "number": "4",+        "name": "LAT",+        "type": "input",+        "description": "Latch input; Schmitt buffer input, when high shift register data continuously transfers to output latch, when low output latch data held, internally pulled down to GND through 500kΩ resistor."+      },+      {+        "number": "5",+        "name": "OUT0",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "6",+        "name": "OUT1",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "7",+        "name": "OUT2",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "8",+        "name": "OUT3",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "9",+        "name": "OUT4",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "10",+        "name": "OUT5",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "11",+        "name": "OUT6",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "12",+        "name": "OUT7",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "13",+        "name": "OUT8",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "14",+        "name": "OUT9",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "15",+        "name": "OUT10",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "16",+        "name": "OUT11",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "17",+        "name": "OUT12",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "18",+        "name": "OUT13",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "19",+        "name": "OUT14",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "20",+        "name": "OUT15",+        "type": "output",+        "description": "Constant current sink output; independently controlled by output latch, capable of 2 to 45 mA depending on VCC and external reference resistor."+      },+      {+        "number": "21",+        "name": "BLANK",+        "type": "input",+        "description": "Blanking control; Schmitt buffer input, when high forces all constant-current outputs off and enables all pre-charge FETs, when low outputs controlled by latch data, internally pulled up to VCC through 500kΩ resistor."+      },+      {+        "number": "22",+        "name": "SOUT",+        "type": "output",+        "description": "Serial data output connected to 16-bit shift register MSB; output data transitions on SCLK rising edge."+      },+      {+        "number": "23",+        "name": "IREF",+        "type": "input",+        "description": "Reference current input; external resistor connected between IREF and GND sets constant output current for all 16 outputs."+      },+      {+        "number": "24",+        "name": "VCC",+        "type": "power_in",+        "description": "Power supply voltage input, 3.0V to 5.5V operating range."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 38,+        "cost_usd": 0.3579,+        "at": "2026-09-24T23:01:53"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlc59283",+        "pages": 38,+        "sha256": "98e3aee5cb12a4d5",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file