component
TLC5926IDBQR
Public Made by Adomby adom
Texas Instruments LED Drivers, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+60@@ -0,0 +1,60 @@+# TLC5926IDBQR++**Texas Instruments** · LED Drivers · SSOP-24-150mil++TLC5926IDBQR from Texas Instruments, in a SSOP-24-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | GND | power_in | Ground pin for control logic and current sink. |+| 2 | SDI | input | Serial-data input to the shift register. |+| 3 | CLK | input | Clock input pin for data shift on rising edge. |+| 4 | LE(ED1) | input | Strobe input for latching serial data; control signal for Error Detection and Current Adjust modes; has internal pulldown. |+| 5 | OUT0 | output | Constant-current output pin. |+| 6 | OUT1 | output | Constant-current output pin. |+| 7 | OUT2 | output | Constant-current output pin. |+| 8 | OUT3 | output | Constant-current output pin. |+| 9 | OUT4 | output | Constant-current output pin. |+| 10 | OUT5 | output | Constant-current output pin. |+| 11 | OUT6 | output | Constant-current output pin. |+| 12 | OUT7 | output | Constant-current output pin. |+| 13 | OUT8 | output | Constant-current output pin. |+| 14 | OUT9 | output | Constant-current output pin. |+| 15 | OUT10 | output | Constant-current output pin. |+| 16 | OUT11 | output | Constant-current output pin. |+| 17 | OUT12 | output | Constant-current output pin. |+| 18 | OUT13 | output | Constant-current output pin. |+| 19 | OUT14 | output | Constant-current output pin. |+| 20 | OUT15 | output | Constant-current output pin. |+| 21 | OE(ED2) | input | Output enable pin (active low); when high, all output drivers are turned OFF; control signal for Error Detection and Current Adjust modes; has internal pullup. |+| 22 | SDO | output | Serial-data output to the following SDI of next driver IC or to the microcontroller. |+| 23 | R-EXT | input | Input pin for connecting external resistor to set all output currents. |+| 24 | VDD | power_in | Supply voltage pin. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-24-150mil |+| Category | LED Drivers |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `TLC5926IDBQR`+- Footprint: `Package_SO:SSOP-24_5.3x8.2mm_P0.65mm`+- 3D model: SSOP-24-150mil (KiCad packages3D, STEP)+- 3D model files: `tlc5926idbqr-etched.step` / `tlc5926idbqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc5926idbqr.step` / `tlc5926idbqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc5927) (39 pp, sha256 `a69f3dc5f708f8ea`, retrieved 2026-10-03, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc5926idbqr-datasheet.pdf)
page.jsonadded+253@@ -0,0 +1,253 @@+{+ "slug": "tlc5926idbqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments LED Drivers, SSOP-24-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "led drivers",+ "tlc5926idbqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tlc5926idbqr.kicad_sym",+ "tlc5926idbqr.kicad_mod",+ "tlc5926idbqr.glb",+ "tlc5926idbqr.step",+ "tlc5926idbqr.lbr",+ "docs/hero.png",+ "docs/tlc5926idbqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tlc5926idbqr-hero.glb",+ "tlc5926idbqr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TLC5926IDBQR",+ "manufacturer": "Texas Instruments",+ "package": "SSOP-24-150mil",+ "pin_count": 24,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tlc5927",+ "parts": {+ "symbol": "tlc5926idbqr.kicad_sym",+ "footprint": "tlc5926idbqr.kicad_mod",+ "model_3d": "tlc5926idbqr-hero.glb",+ "model_3d_plain": "tlc5926idbqr.glb",+ "model_3d_step": "tlc5926idbqr-etched.step",+ "model_3d_step_plain": "tlc5926idbqr.step",+ "lbr": "tlc5926idbqr.lbr"+ },+ "distributor_links": {+ "lcsc": 181595,+ "digikey": "296-24760-2-ND",+ "mouser": "595-TLC5926IDBQR"+ },+ "distributor_check": {+ "checked_at": "2026-10-03T06:07:46Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-24760-2-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-TLC5926IDBQR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin for control logic and current sink."+ },+ {+ "number": "2",+ "name": "SDI",+ "type": "input",+ "description": "Serial-data input to the shift register."+ },+ {+ "number": "3",+ "name": "CLK",+ "type": "input",+ "description": "Clock input pin for data shift on rising edge."+ },+ {+ "number": "4",+ "name": "LE(ED1)",+ "type": "input",+ "description": "Strobe input for latching serial data; control signal for Error Detection and Current Adjust modes; has internal pulldown."+ },+ {+ "number": "5",+ "name": "OUT0",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "6",+ "name": "OUT1",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "7",+ "name": "OUT2",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "8",+ "name": "OUT3",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "9",+ "name": "OUT4",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "10",+ "name": "OUT5",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "11",+ "name": "OUT6",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "12",+ "name": "OUT7",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "13",+ "name": "OUT8",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "14",+ "name": "OUT9",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "15",+ "name": "OUT10",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "16",+ "name": "OUT11",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "17",+ "name": "OUT12",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "18",+ "name": "OUT13",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "19",+ "name": "OUT14",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "20",+ "name": "OUT15",+ "type": "output",+ "description": "Constant-current output pin."+ },+ {+ "number": "21",+ "name": "OE(ED2)",+ "type": "input",+ "description": "Output enable pin (active low); when high, all output drivers are turned OFF; control signal for Error Detection and Current Adjust modes; has internal pullup."+ },+ {+ "number": "22",+ "name": "SDO",+ "type": "output",+ "description": "Serial-data output to the following SDI of next driver IC or to the microcontroller."+ },+ {+ "number": "23",+ "name": "R-EXT",+ "type": "input",+ "description": "Input pin for connecting external resistor to set all output currents."+ },+ {+ "number": "24",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage pin."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 8,+ "cost_usd": 0.1242,+ "at": "2026-10-03T06:07:19"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tlc5927",+ "pages": 39,+ "sha256": "a69f3dc5f708f8ea",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 24,+ "described": 24,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}