← Commit history

Initial commit: component/tlc3578ipwr

Ray ·dc8e8cc9a0 ·
2 files changed +297
README.mdadded+60
@@ -0,0 +1,60 @@+# TLC3578IPWR++**Texas Instruments** · Analog To Digital Converters (ADC) · TSSOP-24++TLC3578IPWR from Texas Instruments, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SCLK | input | Serial clock input from the host processor to clock in the input from SDI and clock out the output via SDO, maximum frequency 25 MHz. |+| 2 | FS | input | Frame sync input from DSP; rising edge indicates the start of a serial data frame being transferred. |+| 3 | SDI | input | Serial data input; first 4 MSBs decoded as one 4-bit command, remaining bits filled with zeros except for WRITE CFR command. |+| 4 | EOC/INT | output | End of conversion (EOC) or interrupt to host processor (INT); EOC used in conversion mode 00 only, goes low at end of sampling. |+| 5 | SDO | tri_state | 3-state serial output for the A/D conversion result, MSB first, in high-impedance state when CS is high. |+| 6 | DGND | power_in | Digital ground return for the internal circuitry. |+| 7 | DVDD | power_in | Digital supply voltage, recommended range 2.7 V to 5.5 V. |+| 8 | CS | input | Chip select; falling edge resets internal 4-bit counter and enables SDI and SCLK, when high SDO is in high-impedance state. |+| 9 | A0 | input | Analog signal input channel 0, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling. |+| 10 | A1 | input | Analog signal input channel 1, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling. |+| 11 | A2 | input | Analog signal input channel 2, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling. |+| 12 | A3 | input | Analog signal input channel 3, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling. |+| 13 | A4 | input | Analog signal input channel 4, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling. |+| 14 | A5 | input | Analog signal input channel 5, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling. |+| 15 | A6 | input | Analog signal input channel 6, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling. |+| 16 | A7 | input | Analog signal input channel 7, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling. |+| 17 | AVDD | power_in | Analog supply voltage, recommended range 4.75 V to 5.5 V. |+| 18 | AGND | power_in | Analog ground return for the internal circuitry. |+| 19 | REFP | input | External positive reference input, range 3.96 V to 4.04 V; install decoupling capacitors 10 µF in parallel with 0.1 µF between REFP and REFM. |+| 20 | REFM | input | External low reference input; connect to AGND to establish the ±10 V bipolar input range. |+| 21 | COMP | passive | Internal compensation pin; install 0.1 µF compensation capacitor between this pin and AGND. |+| 22 | AGND | power_in | Analog ground return for the internal circuitry. |+| 23 | AVDD | power_in | Analog supply voltage, recommended range 4.75 V to 5.5 V. |+| 24 | CSTART | input | External sampling trigger signal; high-to-low transition starts sampling, low-to-high transition puts S/H in hold mode and starts conversion with 15 ns internal delay. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-24 |+| Category | Data Acquisition |+| Pins | 24 |++## CAD (KiCad official)++- Symbol: `TLC3578IPWR`+- Footprint: `Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm`+- 3D model: TSSOP-24 (KiCad packages3D, STEP)+- 3D model files: `tlc3578ipwr-etched.step` / `tlc3578ipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tlc3578ipwr.step` / `tlc3578ipwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tlc2574) (54 pp, sha256 `a98de3fa366cd8b4`, retrieved 2026-09-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tlc3578ipwr-datasheet.pdf)
page.jsonadded+237
@@ -0,0 +1,237 @@+{+  "slug": "tlc3578ipwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Analog To Digital Converters (ADC), TSSOP-24. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "tlc3578ipwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tlc3578ipwr.kicad_sym",+    "tlc3578ipwr.kicad_mod",+    "tlc3578ipwr.glb",+    "tlc3578ipwr.step",+    "tlc3578ipwr.lbr",+    "docs/hero.png",+    "docs/tlc3578ipwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TLC3578IPWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-24",+    "pin_count": 24,+    "category": "Data Acquisition",+    "subcategory": "Analog To Digital Converters (ADC)",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tlc2574",+    "parts": {+      "symbol": "tlc3578ipwr.kicad_sym",+      "footprint": "tlc3578ipwr.kicad_mod",+      "model_3d": "tlc3578ipwr-etched.glb",+      "model_3d_plain": "tlc3578ipwr.glb",+      "model_3d_step": "tlc3578ipwr-etched.step",+      "model_3d_step_plain": "tlc3578ipwr.step",+      "lbr": "tlc3578ipwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2670863"+    },+    "pins": [+      {+        "number": "1",+        "name": "SCLK",+        "type": "input",+        "description": "Serial clock input from the host processor to clock in the input from SDI and clock out the output via SDO, maximum frequency 25 MHz."+      },+      {+        "number": "2",+        "name": "FS",+        "type": "input",+        "description": "Frame sync input from DSP; rising edge indicates the start of a serial data frame being transferred."+      },+      {+        "number": "3",+        "name": "SDI",+        "type": "input",+        "description": "Serial data input; first 4 MSBs decoded as one 4-bit command, remaining bits filled with zeros except for WRITE CFR command."+      },+      {+        "number": "4",+        "name": "EOC/INT",+        "type": "output",+        "description": "End of conversion (EOC) or interrupt to host processor (INT); EOC used in conversion mode 00 only, goes low at end of sampling."+      },+      {+        "number": "5",+        "name": "SDO",+        "type": "tri_state",+        "description": "3-state serial output for the A/D conversion result, MSB first, in high-impedance state when CS is high."+      },+      {+        "number": "6",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground return for the internal circuitry."+      },+      {+        "number": "7",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital supply voltage, recommended range 2.7 V to 5.5 V."+      },+      {+        "number": "8",+        "name": "CS",+        "type": "input",+        "description": "Chip select; falling edge resets internal 4-bit counter and enables SDI and SCLK, when high SDO is in high-impedance state."+      },+      {+        "number": "9",+        "name": "A0",+        "type": "input",+        "description": "Analog signal input channel 0, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."+      },+      {+        "number": "10",+        "name": "A1",+        "type": "input",+        "description": "Analog signal input channel 1, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."+      },+      {+        "number": "11",+        "name": "A2",+        "type": "input",+        "description": "Analog signal input channel 2, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."+      },+      {+        "number": "12",+        "name": "A3",+        "type": "input",+        "description": "Analog signal input channel 3, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."+      },+      {+        "number": "13",+        "name": "A4",+        "type": "input",+        "description": "Analog signal input channel 4, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."+      },+      {+        "number": "14",+        "name": "A5",+        "type": "input",+        "description": "Analog signal input channel 5, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."+      },+      {+        "number": "15",+        "name": "A6",+        "type": "input",+        "description": "Analog signal input channel 6, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."+      },+      {+        "number": "16",+        "name": "A7",+        "type": "input",+        "description": "Analog signal input channel 7, internally multiplexed with driving source impedance ≤ 25 Ω for normal sampling."+      },+      {+        "number": "17",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog supply voltage, recommended range 4.75 V to 5.5 V."+      },+      {+        "number": "18",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground return for the internal circuitry."+      },+      {+        "number": "19",+        "name": "REFP",+        "type": "input",+        "description": "External positive reference input, range 3.96 V to 4.04 V; install decoupling capacitors 10 µF in parallel with 0.1 µF between REFP and REFM."+      },+      {+        "number": "20",+        "name": "REFM",+        "type": "input",+        "description": "External low reference input; connect to AGND to establish the ±10 V bipolar input range."+      },+      {+        "number": "21",+        "name": "COMP",+        "type": "passive",+        "description": "Internal compensation pin; install 0.1 µF compensation capacitor between this pin and AGND."+      },+      {+        "number": "22",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground return for the internal circuitry."+      },+      {+        "number": "23",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog supply voltage, recommended range 4.75 V to 5.5 V."+      },+      {+        "number": "24",+        "name": "CSTART",+        "type": "input",+        "description": "External sampling trigger signal; high-to-low transition starts sampling, low-to-high transition puts S/H in hold mode and starts conversion with 15 ns internal delay."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 54,+        "cost_usd": 0.582,+        "at": "2026-09-23T17:33:36"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tlc2574",+        "pages": 54,+        "sha256": "a98de3fa366cd8b4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 24,+        "described": 24,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file