← Commit history

Initial commit: component/tl594cpwr

Ray ·2117fb1c17 ·
2 files changed +257
README.mdadded+53
@@ -0,0 +1,53 @@+# TL594CPWR++**Texas Instruments** · DC-DC Converters · TSSOP-16++TL594CPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1IN+ | input | Non-inverting input of Error Amplifier 1, common-mode input voltage range -0.3V to VCC-2V |+| 2 | 1IN- | input | Inverting input of Error Amplifier 1 |+| 3 | FEEDBACK | input | Feedback input pin for PWM control; input voltage 0.5V to 3.5V produces duty cycle from 97% to 0% |+| 4 | DTC | input | Dead Time Control Comparator input for controlling minimum dead time from 3% to 100%; input range 0V to 3.3V |+| 5 | CT | passive | Capacitor terminal for setting oscillator frequency with external CT capacitor; frequency range 1kHz to 300kHz with appropriate CT and RT values |+| 6 | RT | passive | Resistor terminal for setting oscillator frequency; external RT timing resistor value range 1.8kΩ to 500kΩ |+| 7 | GND | power_in | Ground reference for all internal circuits |+| 8 | C1 | output | MOSFET Output 1 drain terminal, 200mA maximum source/sink current, saturated voltage <1.3V in common-source configuration |+| 9 | E1 | output | MOSFET Output 1 source terminal, 200mA maximum source/sink current |+| 10 | E2 | output | MOSFET Output 2 source terminal, 200mA maximum source/sink current |+| 11 | C2 | output | MOSFET Output 2 drain terminal, 200mA maximum source/sink current, saturated voltage <1.3V in common-source configuration |+| 12 | VCC | power_in | Positive power supply input; recommended operating voltage range 7V to 40V; absolute maximum 41V |+| 13 | OUTPUT CTRL | input | Output control input for mode selection: ground for single-ended/parallel operation, Vref for push-pull operation |+| 14 | REF | output | 5V reference regulator output with ±1% initial accuracy; can supply 10mA maximum for external bias circuits |+| 15 | 2IN- | input | Inverting input of Error Amplifier 2 |+| 16 | 2IN+ | input | Non-inverting input of Error Amplifier 2, common-mode input voltage range -0.3V to VCC-2V |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Power Management (PMIC) |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `TL594CPWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `tl594cpwr-etched.step` / `tl594cpwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl594cpwr.step` / `tl594cpwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tl594) (35 pp, sha256 `039f5c630764f6f7`, retrieved 2026-09-27, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tl594cpwr-datasheet.pdf)
page.jsonadded+204
@@ -0,0 +1,204 @@+{+  "slug": "tl594cpwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments DC-DC Converters, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "power management (pmic)",+    "tl594cpwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "tl594cpwr.kicad_sym",+    "tl594cpwr.kicad_mod",+    "tl594cpwr.glb",+    "tl594cpwr.step",+    "tl594cpwr.lbr",+    "docs/hero.png",+    "docs/tl594cpwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "TL594CPWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Power Management (PMIC)",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/tl594",+    "parts": {+      "symbol": "tl594cpwr.kicad_sym",+      "footprint": "tl594cpwr.kicad_mod",+      "model_3d": "tl594cpwr-etched.glb",+      "model_3d_plain": "tl594cpwr.glb",+      "model_3d_step": "tl594cpwr-etched.step",+      "model_3d_step_plain": "tl594cpwr.step",+      "lbr": "tl594cpwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2658058",+      "digikey": "296-18890-2-ND",+      "mouser": "595-TL594CPWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-27T05:54:09Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-18890-2-ND",+        "status": "found",+        "lifecycle": "Active"+      },+      "mouser": {+        "pn": "595-TL594CPWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "1IN+",+        "type": "input",+        "description": "Non-inverting input of Error Amplifier 1, common-mode input voltage range -0.3V to VCC-2V"+      },+      {+        "number": "2",+        "name": "1IN–",+        "type": "input",+        "description": "Inverting input of Error Amplifier 1"+      },+      {+        "number": "3",+        "name": "FEEDBACK",+        "type": "input",+        "description": "Feedback input pin for PWM control; input voltage 0.5V to 3.5V produces duty cycle from 97% to 0%"+      },+      {+        "number": "4",+        "name": "DTC",+        "type": "input",+        "description": "Dead Time Control Comparator input for controlling minimum dead time from 3% to 100%; input range 0V to 3.3V"+      },+      {+        "number": "5",+        "name": "CT",+        "type": "passive",+        "description": "Capacitor terminal for setting oscillator frequency with external CT capacitor; frequency range 1kHz to 300kHz with appropriate CT and RT values"+      },+      {+        "number": "6",+        "name": "RT",+        "type": "passive",+        "description": "Resistor terminal for setting oscillator frequency; external RT timing resistor value range 1.8kΩ to 500kΩ"+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for all internal circuits"+      },+      {+        "number": "8",+        "name": "C1",+        "type": "output",+        "description": "MOSFET Output 1 drain terminal, 200mA maximum source/sink current, saturated voltage <1.3V in common-source configuration"+      },+      {+        "number": "9",+        "name": "E1",+        "type": "output",+        "description": "MOSFET Output 1 source terminal, 200mA maximum source/sink current"+      },+      {+        "number": "10",+        "name": "E2",+        "type": "output",+        "description": "MOSFET Output 2 source terminal, 200mA maximum source/sink current"+      },+      {+        "number": "11",+        "name": "C2",+        "type": "output",+        "description": "MOSFET Output 2 drain terminal, 200mA maximum source/sink current, saturated voltage <1.3V in common-source configuration"+      },+      {+        "number": "12",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive power supply input; recommended operating voltage range 7V to 40V; absolute maximum 41V"+      },+      {+        "number": "13",+        "name": "OUTPUT CTRL",+        "type": "input",+        "description": "Output control input for mode selection: ground for single-ended/parallel operation, Vref for push-pull operation"+      },+      {+        "number": "14",+        "name": "REF",+        "type": "output",+        "description": "5V reference regulator output with ±1% initial accuracy; can supply 10mA maximum for external bias circuits"+      },+      {+        "number": "15",+        "name": "2IN–",+        "type": "input",+        "description": "Inverting input of Error Amplifier 2"+      },+      {+        "number": "16",+        "name": "2IN+",+        "type": "input",+        "description": "Non-inverting input of Error Amplifier 2, common-mode input voltage range -0.3V to VCC-2V"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 35,+        "cost_usd": 0.3313,+        "at": "2026-09-27T05:53:52"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/tl594",+        "pages": 35,+        "sha256": "039f5c630764f6f7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file