component
TL1963A-25DCQR
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+43@@ -0,0 +1,43 @@+# TL1963A-25DCQR++**Texas Instruments** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223-6++TL1963A-25DCQR from Texas Instruments, in a SOT-223-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SHDN | input | Driving SHDN high (above 2 V, VIH max 20 V) enables the device and driving it low (below 0.25 V) disables it; if unused it must be tied to VIN, and the pin has a weak internal pull-down so it disables the device when open. |+| 2 | IN | power_in | Input supply pin; for the old-chip TL1963A-xx the input must be at least VOUT + VDO and no more than 20 V, and reverse-current protection applies when OUT is held above IN. |+| 3 | GND | power_in | Ground pin, which must be connected to the exposed thermal pad on the PCB. |+| 4 | OUT | power_out | Regulator output that delivers up to 1.5 A and requires a capacitor of at least 10 µF with ESR of 3 Ω or less from OUT to ground for stability, placed as close to the pin as possible. |+| 5 | SENSE/ADJ | input | For the fixed-voltage TL1963A-25 this SENSE pin is the error-amplifier input and must be connected to OUT for proper operation, with the SENSE bias current specified as ISENSE in the electrical characteristics. |+| 6 | GND | power_in | Second ground pin, which is tied to the same ground net as pin 3 and the exposed thermal pad. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOT-223-6 |+| Category | Power Management (PMIC) |+| Pins | 6 |++## CAD (KiCad official)++- Symbol: `TL1963A-25DCQR`+- Footprint: `Package_TO_SOT_SMD:SOT-223-6`+- 3D model: SOT-223-6 (KiCad packages3D, STEP)+- 3D model files: `tl1963a-25dcqr-etched.step` / `tl1963a-25dcqr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `tl1963a-25dcqr.step` / `tl1963a-25dcqr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/tl1963a) (59 pp, sha256 `678bca278f2398fb`, retrieved 2026-10-08, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/tl1963a-25dcqr-datasheet.pdf)
page.jsonadded+188@@ -0,0 +1,188 @@+{+ "slug": "tl1963a-25dcqr",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "power management (pmic)",+ "tl1963a-25dcqr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "tl1963a-25dcqr.kicad_sym",+ "tl1963a-25dcqr.kicad_mod",+ "tl1963a-25dcqr.glb",+ "tl1963a-25dcqr.step",+ "tl1963a-25dcqr.lbr",+ "docs/hero.png",+ "docs/tl1963a-25dcqr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "tl1963a-25dcqr-hero.glb",+ "tl1963a-25dcqr-hero.overlay.json"+ ],+ "component": {+ "mpn": "TL1963A-25DCQR",+ "manufacturer": "Texas Instruments",+ "package": "SOT-223-6",+ "pin_count": 6,+ "category": "Power Management (PMIC)",+ "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+ "datasheet": "https://www.ti.com/cn/lit/gpn/tl1963a",+ "parts": {+ "symbol": "tl1963a-25dcqr.kicad_sym",+ "footprint": "tl1963a-25dcqr.kicad_mod",+ "model_3d": "tl1963a-25dcqr-hero.glb",+ "model_3d_plain": "tl1963a-25dcqr.glb",+ "model_3d_step": "tl1963a-25dcqr-etched.step",+ "model_3d_step_plain": "tl1963a-25dcqr.step",+ "lbr": "tl1963a-25dcqr.lbr"+ },+ "distributor_links": {+ "lcsc": "C2860639",+ "digikey": "296-24533-2-ND",+ "mouser": "595-TL1963A-25DCQR"+ },+ "distributor_check": {+ "checked_at": "2026-10-08T18:46:48Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "296-24533-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "595-TL1963A-25DCQR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SHDN",+ "type": "input",+ "description": "Driving SHDN high (above 2 V, VIH max 20 V) enables the device and driving it low (below 0.25 V) disables it; if unused it must be tied to VIN, and the pin has a weak internal pull-down so it disables the device when open."+ },+ {+ "number": "2",+ "name": "IN",+ "type": "power_in",+ "description": "Input supply pin; for the old-chip TL1963A-xx the input must be at least VOUT + VDO and no more than 20 V, and reverse-current protection applies when OUT is held above IN."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin, which must be connected to the exposed thermal pad on the PCB."+ },+ {+ "number": "4",+ "name": "OUT",+ "type": "power_out",+ "description": "Regulator output that delivers up to 1.5 A and requires a capacitor of at least 10 µF with ESR of 3 Ω or less from OUT to ground for stability, placed as close to the pin as possible."+ },+ {+ "number": "5",+ "name": "SENSE/ADJ",+ "type": "input",+ "description": "For the fixed-voltage TL1963A-25 this SENSE pin is the error-amplifier input and must be connected to OUT for proper operation, with the SENSE bias current specified as ISENSE in the electrical characteristics."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Second ground pin, which is tied to the same ground net as pin 3 and the exposed thermal pad."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The exposed thermal pad (tab) is ground and must be soldered to the PCB, but the datasheet does not ; The pin table names pin 5 'SENSE/ADJ'. For the fixed-voltage TL1963A-25 it functions as SENSE (tie t; The datasheet lists the TL1963A-25 fixed 2.5 V version among the old-chip parts (new-chip options ar"+ ],+ "pages_sent": 43,+ "cost_usd": 0.2117,+ "at": "2026-10-08T18:46:11"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/tl1963a",+ "pages": 59,+ "sha256": "678bca278f2398fb",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "tl1963a-25dcqr.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.475,+ 6.7,+ 1.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "bf43e0f52215e5c8b069c660d1a580928edb1037d7f7155d98bb6d1df79e64ff",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "tl1963a-25dcqr-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 8.475,+ 6.7,+ 1.6+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "c75ebaf965d7a5f02fc0bb12d5ff489d5d0d114c75eb3e15a54ad679beeebe92",+ "checked": "2026-10-08",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}